IIUM Repository

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Jump to: | , | - | . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | W | Y | Z
Number of items at this level: 1029.

Mokhtar, Hanan and Sicot, Olivier and Rousseau, Jérôme and Aminanda, Yulfian and Aivazzadeh, Shahram (2011) The influence of ageing on the impact damage of carbon epoxy composites. Procedia Engineering, 10. pp. 2615-2620. ISSN 1877-7058

,

, Afzeri and Sutjipto, Agus Geter Edy and Muhida, Riza and Konneh, Mohamed and ., Darmawan (2009) Remote operation of CNC milling through virtual simulation and remote dekstop interface. World Academy of Science, Engineering and Technology, 53. pp. 64-67. ISSN 1307-6884

-

-, Abdus Sabur and Mohammad , Yeakub Ali (2011) Fabrication of micro filter by electro discharge machining. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 159-164. ISBN 9789674181628

-, Pramusanto and Purwanto, Hadi and Saleh, Nuryadi and Suprianto, Sony (2011) Kinetic study of reduction roasting of mixed laterite ore and coal. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 70-74. ISBN 9789674181642

.

., Afzeri and Muhida, Riza and ., Darmawan (2010) Development of remote operability CNC milling. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

., Arifutzzaman and Maleque, Md. Abdul (2011) The tribological behaviour of Al-Si automotive piston material. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 75-80. ISBN 9789674181642

., Muta'alim and Purwanto, Hadi and Saleh, Nuryadi and ., Pramusanto (2011) Upgrading of iron sand by magnetic concentration and reduction. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 7-15. ISBN 9789674181642

A

A. Ghani, Jaharah and A. Raof, Natasha and Che Haron, Che Hassan and Junaidi, Syarif (2016) TRIZ approach for machining process innovation in cryogenic environment. International Journal of Materials and Product Technology, 53 (3-4). pp. 286-297. ISSN 0268-1900 E-ISSN 1741-5209

A. Rahim, Syazwani and Muthalif, Asan G. A. and Turahim, Khairiah Kamilah and Nordin, Nor Hidayati Diyana (2019) Active Vibration Isolation System (AVIS) using a voice coil actuator to improve free space optics communication. In: "10th IEEE Control and System Graduate Research Colloquium, ICSGRC 2019", 2- 3 August 2019, Shah Alam.

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi (2018) The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 -9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

A. Razak, Amir and Abdul Majid, Zafri Azran and Azmi, W.H. and Ruslan, Mohd Hafidz and Choobchian, Sh H. and Najafi, Gholamhassan and Sopian, Kamaruzzaman (2016) Review on matrix thermal absorber designs for solar air collector. Renewable and Sustainable Energy Reviews, 64. pp. 682-693. ISSN 1364-0321

A. Rizk, Abd El-Fattah and Hrairi, Meftah (2009) Edge-cracked bimaterial systems under thermal heating. International Journal of Solids and Structures, 46 (7-8). pp. 1648-1658. ISSN 0020-7683

Aabid, Abdul and Afifi, Azmil and Mehaboobali, Fharukh Ahmed Ghasi and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2019) CFD analysis of splitter plate on bluff body. CFD Lettrs, 11 (11). pp. 25-38. ISSN 2180-1363

Aabid, Abdul and Hrairi, Meftah and Mohamed Ali, Jaffar Syed and Abuzaid, Ahmed (2018) Stress concentration analysis of a composite patch on a hole in an isotropic plate. International Journal of Mechanical and Production Engineering Research and Development, 2018 (Special Issue). pp. 249-255. ISSN 2249-6890 E-ISSN 2249-8001

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Modeling different repair configurations of an aluminum plate with a hole. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Modeling different repair configurations of an aluminum plate with a hole. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 235-240. ISSN 2277-3878

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2018) Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development, Special issue. pp. 238-243. ISSN 2249-6890 E-ISSN 2249-8001

Aabid, Abdul and Khan, Sher Afghan (2018) Optimization of heat transfer on thermal barrier coated gas turbine blade. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 -22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Ab Rahim, Abdul Hakim and Ramli, Nabilah and Nordin, Anis Nurashikin (2018) Fabrication and characterization of supercapacitor with activated carbon electrode and NaOH electrolyte. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Gombak, Kuala Lumpur.

Ab. Rahim, Rosminazuin and Bais, Badariah and Yeop Majlis, Burhanuddin (2015) Fabrication of dual- and single-layer piezoresistive microcantilever sensor. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6274-6278. ISSN 1819-6608

Abakrb, Yousif A. and Ismail, Ahmad Faris (2005) Theoretical and experimental investigation of a novel multistage evacuated solar still. Journal of Solar Energy Engineering, 127 (3). pp. 381-385. ISSN 0199 - 6231

Abas, Norafizah and Akmeliawati, Rini (2011) Backstepping control of an autonomous quadrotor. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 93-102. ISBN 9789674181765

Abbas, Muhammad Mujtaba and Kalam, Md Abul and Masjuki, Haji Hassan and Razzaq, Luqman and Khan, Haris Mehmood and Soudagar, Manzoore Elahi M. and Gul, M. and Ahmed, Waqar Ahmed and V., Dhana Raju and Kumar, Ravinder and Ong, Hwai Chyuan (2021) Development of empirical correlations for density and viscosity estimation of ternary biodiesel blends. Renewable Energy, 179. pp. 1447-1457. ISSN 0960-1481

Abd Halim, Nor Farah Huda and , Afzeri and Aminanda, Yulfian (2011) Experimental study of cutting parameter for drilling on fabric carbon/epoxy composite laminates. Advanced Materials Research, 311. pp. 240-243. ISSN 1662-8985

Abd Halim, Nor Farah Huda and -, Afzeri and Aminanda, Yulfian (2011) Experimental study of cutting parameter for drilling on fabric carbon/epoxy composite laminates. In: 2011 International Conference on Advanced Design and Manufacturing Engineering, (ADME 2011), 16th-18th Sept. 2011, Guangzhou, China.

Abd Halim, Nor Farah Huda and Ascroft, Helen and Barnes, Stuart (2016) Machinability study of ultrasonic assisted machining (UAM) of carbon fibre reinforced plastic (CFRP) with multifaceted tool. In: 7th CIRP Conference on High Performance Cutting 2016, 31st May-2nd June 2016, Chemnitz; Germany.

Abd Halim, Nor Farah Huda and Ascrofta, Helen and Barnes, Stuart (2017) Analysis of tool wear, cutting force, surface roughness and machining temperature during finishing operation of ultrasonic assisted milling (UAM) of carbon fibre reinforced plastic (CFRP). In: Advances in Material and Processing Technologies Conference (AMPT 2017), 11th December 2017-14th December 2017, Chennai, India.

Abd Halim, Nor Farah Huda and Dahnel, Aishah Najiah and Ismail, Azwa Azmariza and Zainudin, Nur Amanina (2020) An experimental investigation on drilling of aluminum alloy (Al 7075) using high speed steel cutting tools. TEST: Engineering & Management, 83 (May-June). 1451 -1456. ISSN 0193-4120

Abd Halim, Nor Farah Huda and Mustafa, Aisyah Madihah and Shaharudin, N.S. and Dahnel, Aishah Najiah and Tomadi, Siti Haryani and Ahmad, Zuraida and Adesta, E.Y.T. and Rahman, M. (2023) Tool wear and wear mechanism of WC-Co End Mill during milling of CFRP in sustainable cutting conditions. Materials Science Forum, 1109. pp. 153-158. ISSN 1662-9752

Abd Kadir, Nurdina and Aminanda, Yulfian and Shaik Dawood, Mohd Sultan Ibrahim and Mokhtar, Hanan (2017) Numerical analysis of kraft paper honey comb subjected to uniform compression loading. In: International Conference on Materials Physics and Mechanics 2017, 23 July 2017, Langkawi, Kedah.

Abd Kadir, Nurdina and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim and Mohktar, Hanan (2017) A study on the parameters affecting the properties of coated paper honeycomb. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abd Mutalib, Mohd Azri and Zainul Azlan, Norsinnira (2020) Review and prototype development of Mecanum wheels mobile robot. International Journal of Applied Research and Smart Technology (ARSTECH). ISSN 2722-9637 E-ISSN 2722-9645 (In Press)

Abd Mutalib, Mohd Azri and Zainul Azlan, Norsinnira and Mahmood, Iskandar Al-Thani (2019) Modelling of mobility mechanism for Motorized Adjustable Vertical Platform (MAVeP). In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Abd Nasser, Mohammed Alawi and Ismail, Yusof and Al-Ameri, Salem Mgammal and Sorooshian, Shahryar (2021) Framing an alternative mean to address electricity disruptions. In: Taras Shevchenko 6th International Congress on Social Sciences, Kyiv, Ukraine.

Abdalla, Mostafa M. and Reddy, Chevva Konda and Faris, Waleed Fekry and Gürdal, Zafer (2005) Optimal design of an electrostatically actuated microbeam for maximum pull-in voltage. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2003, 7th-10th April 2003, Norfolk, Virginia.

Abdalla, Shiref A. and Mansor, Hasmah and Hasbullah, Nurul Fadzlin and M. Kassem, Ahmad (2020) Modeling and control design of an autonomous hybrid wind/energy storage generation unit. International Journal of Psychosocial Rehabilitation, 24 (2). pp. 2441-2451. ISSN 1475-7192

Abdel Wahab, Magd and Hilmy, Irfan and Hojjati-Talemi, Reza (2013) On the use of low and high cycle fatigue damage models. Key Engineering Materials, 569-70. pp. 1029-1035. ISSN 1013-9826

Abdul, Aabid and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2020) Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. Materials Today: Proceedings, 27 (2). pp. 1713-1719. ISSN 2214-7853

Abdul Aziz, M. and ., Arifuzzaman and Shams, Fahmida and Rashid, Muhammad Mahbubur and Uddin, Md. Nasir (2015) Design and development of a compressed air machine using a compressed air energy storage system. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17332-17336. ISSN 1819-6608

Abdul Aziz, Mohammad and Halim, Zahurin and Othman, Maizatulnisa (2018) Effect of different concentration of sodium hydroxide [NaOH] of sodium hydroxide [NaOH] on Kenaf sandwich structures. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Abdul Aziz, Nor Nadirah and Mohd Mustafah, Yasir and Azman, Amelia Wong and Shafie, Amir Akramin and Yusoff, Muhammad Izad and Zainuddin, Nor Afiqah and Rashidan, Mohammad Ariff (2018) Features-based moving objects tracking for smart video surveillances: A review. International Journal on Artificial Intelligence Tools, 27 (2). ISSN 0218-2130

Abdul Jabar, Abdul Kadir and Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa (2011) Automatic storage and retrieval system. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 9789674181765

Abdul Kadir, Nurdina and Aminanda, Yulfian and Shaikh Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2018) Experimental study of low-velocity impact on foam-filled kraft paper honeycomb structure. In: "International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)", 8-9 August 2017, Kuala Lumpur, Malaysia.

Abdul Majid, Zafri Azran and Hazali, Norazlanshah and Hanafiah, M. A. K. M. and Abdullah, A. A. and Ismail, Ahmad Faris and Ruslan, M. H. and Sopian, K. and Mohd Azmi, M. S. (2011) Design and performance of 20 watts portable solar generator. In: 1st InternationalConferenceonMechanicalEngineeringResearch2011(ICMER2011), Kuantan, Pahang.

Abdul Muthalif, Asan Gani and Nordin, Nor Hidayati Diyana (2015) Optimal piezoelectric beam shape for single and broadband vibration energy harvesting: modeling, simulation and experimental results. Mechanical Systems and Signal Processing, 54-55. pp. 417-426. ISSN 0888-3270

Abdul Muthalif, Asan Gani and Turahim, Khairiah K. and Ab Rahim, Syazwani (2013) Active vibration isolation system to improve free space optics communication. Lecture Notes in Electrical Engineering, 211. pp. 369-378. ISSN 1876-6100

Abdul Muthalif, Asan Gani and Walid, Azni N. and Mohd Nor, Khairul A. (2014) Estimating ensemble average power delivered by a piezoelectric patch actuator to a non-deterministic subsystem. Journal of Sound and Vibration, 333 (4). pp. 1149-1162. ISSN 0022-460X

Abdul Razak, Amir and Abdul Majid, Zafri Azran and Basrawi, Firdaus and Sharol, Ahmad Fadzil and Ruslan, Mohd Hafidz and Sopian, Kamaruzaman (2019) A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. Solar Energy, 178. pp. 314-330. ISSN 0038-092X

Abdulazeez, Murtala and Salami, Momoh Jimoh Eyiomika and Khan, Md. Raisuddin (2011) Natural ventilation of yam storage system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 199-207. ISBN 9789674181734

Abdulazeez, Murtala and Salami, Momoh Jimoh Eyiomika and Khan, Md. Raisuddin and Adeyemi, Nabeel A. (2011) Simulation of airflow and temperature distribution in yam storage system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 213-218. ISBN 9789674181734

Abdulkareem, Suleiman and Ali Khan, Ahsan and Konneh, Mohamed (2010) Reducing electrode wear using cryogenic cooling during electrical discharge machining. Advanced Materials Research, 83-86. pp. 672-679. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Konneh, Mohamed (2010) Cooling effect on electrode and process parameters in EDM. Materials and Manufacturing Processes, 25 (6). pp. 462-466. ISSN 1532-2475 (O), 1042-6914 (P)

Abdullah, Ainul Farahin and Adesta, Erry Yulian Triblas (2015) Implementation of functional analysis using value analysis value engineering (VAVE). ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10072-10076. ISSN 1819-6608

Abdullah, Ainul Farahin and Adesta, Erry Yulian Triblas and Al-Fadhli, Fawaz M.K.H. (2015) Organising Value Analysis Value Engineering (VAVE) during New Product Development (NPD). ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10052-10057. ISSN 1819-6608

Abdullah, Kassim Abdulrahman (2012) Design and fabrication of the second generation IIUM buggy car. Research Report. s.n, Kuala Lumpur. (Unpublished)

Abdullah, Kassim Abdulrahman and Wan Sulaiman, Nur Hidayah (2011) Buckling and crush analysis of light weight structure. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, pp. 48-53. ISBN 9789674181741

Abdullah, Kassim Abdulrahman and Cheah , Siew Loong (2011) Design and fabrication of the testing model of the vehicle structure test system. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, pp. 196-201. ISBN 9789674181741

Abdullah, Kassim Abdulrahman and Roslan, Zahra (2011) Analysis of lightweight structural tubes for crashworthy car body. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 54-60. ISBN 9789674181741

Abdullah, Kassim Abdulrahman and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian (2012) Experimental and numerical simulation of hollow structure under compression loading. Advanced Materials Research, 576. pp. 651-654. ISSN 1022-6680

Abdullah, Kassim Abdulrahman and Venkatason, Kausalyah and Shasthri, Sevaguru and Idres, Moumen and Shah, Qasim Hussain (2014) Development and optimization of a vehicle front-end geometry model for improved pedestrian safety. In: International Conference on Automotive and Vehicle Technologies (AVTECH '14), 16-18 October 2014, Yildiz Technical University, Istanbul, Turkey.

Abdullah, M. Dzareeful F. and Wahid, Azni Nabela and Muthalif, Asan G. A. (2023) Development of shape memory alloy (SMA) based artificial muscle for application in soft gripper. Journal of Engineering Science and Technology, 18 (3). pp. 1413-1426. ISSN 1823-4690

Abdullah, Muhammad and Rossiter, John Anthony and Abdul Ghaffar, Alia Farhana (2021) Improved constraint handling approach for predictive functional control using an implied closed-loop prediction. IIUM Engineering Journal, 22 (1). pp. 323-338. ISSN 1511-788X E-ISSN 2289-7860

Abdullah, Muhammad Amirul and Toha, Siti Fauziah and Ahmad, Salmiah (2017) Investigation on the maximum power point in solar panel characteristics due to irradiance changes. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th - 27th July 2017, Kuala Lumpur, Malaysia.

Abdullah, Muhammad Faris and Idres, Moumen (2014) Constrained model predictive control for proton exchange membrane fuel cell. Journal of Mechanical Science and Technology, 28 (9). pp. 3855-3862. ISSN 1738494X

Abdullah, Muhammad Faris and Idres, Moumen (2014) Fuel cell starvation control using model Predictive technique with laguerre and exponential weight functions. Journal of Mechanical Science and Technology, 28 (5). pp. 1995-2002. ISSN 1738-494X E-ISSN 1976-3824

Abdullah, Nur Azam (2021) Pembangunan teknologi aeroangkasa bagi pertahanan nasional. In: Webinar Aviation, Aero Space and Space Awareness, Virtual. (Unpublished)

Abdullah, Nur Azam (2021) Penggubalan polisi: merangka kapasiti pertahanan negara masa hadapan. In: Bengkel Merangka Kapasiti Pertahanan Negara Masa Hadapan: Pembangunan Rangka Tindakan Kapasiti Pertahanan (RTKP) - Kertas Putih Pertahanan (KPP), 4 May 2021, Hotel InterContinental, Kuala Lumpur. (Unpublished)

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Ismail, Izham Izzat and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Abidin, Zulkifli Zainal and Abu Bakar, Ahmad Joahari and Dani, Noriza (2021) Flow behaviour assessment of Smokey SAM rocket prototype. CFD Letters, 13 (9). pp. 42-56. ISSN 2180-1363

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor iqram (2021) Computational modelling of bird strike impact on an aluminium alloy plate via coupling of FE-SPH. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 08-09 Mar 2021, Online.

Abdullah, mohammad and Idres, Moumen (2015) Evaluation of Orifice Flow Meter Accuracy under Pulsation Conditions. Advanced Materials Research, 1115. pp. 472-475. ISSN 1022-6680

Abdullahi, Auwalu M. and Mohamed, Zaharuddin and Zainal Abidin, Mohamad Shukri and Akmeliawati, Rini and Husain, Abdul Rashid and A. Bature, Amir (2016) Adaptive input shaping for sway control of 3D crane using a pole-zero cancellation method. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13-14 December 2015, Berjaya Times Square Hotel Jalan Imbi, Kuala Lumpur.

Abdur-Rasheed, Alao and Konneh, Mohamed (2011) Optimization of precision grinding parameters of silicon for surface roughness based on taguchi method. Advanced Materials Research, 264 . pp. 997-1002. ISSN 1022-6680

Abid, Hasan M. and Shah, Qasim Hussain and Faris, Waleed Fekry (2011) The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Evaluating the reduction of stress intensity factor in center-cracked plates using piezoelectric actuators. Actuators, 7 (2). pp. 1-13. ISSN 2076-0825

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Experimental and numerical analysis of piezoelectric active repair of edge-cracked plate. Journal of Intelligent Material Systems and Structures, 29 (18). pp. 3656-3666. ISSN 1045-389X E-ISSN 1530-8138

Abuzaid, Ahmed and Shaik Dawood, Mohd. Sultan Ibrahim and Hrairi, Meftah (2015) Effects of adhesive bond on active repair of aluminium plate using piezoelectric patch. Applied Mechanics and Materials, 799-80. pp. 788-793. ISSN 1660-9336

Abuzaid, Ahmed and Shaik Dawood, Mohd. Sultan Ibrahim and Hrairi, Meftah (2015) The effect of piezoelectric actuation on stress distribution in aluminum plate with circular hole. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9723-9729. ISSN 1819-6608

Acharya, Samarendra and Gonda, Debasish and Das, Santanu and Bose, Dipankar and Islam, Rafikul (2024) Augmentation of depth of penetration and productivity benefits of ATIG welds using the AHP. International Journal of the Analytic Hierarchy Process, 15 (3). pp. 1-20. ISSN 1936-6744

Adebisi, Adetayo A. and Maleque, Md. Abdul (2011) Medelling aspect of corrosive wear under biodiesel. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, Malaysia.

Adebisi, Adetayo A. and Maleque, Md. Abdul (2011) Modelling aspect of corrosive wear under biodiesel. Engineering e-Transaction, 6 (2). pp. 161-168. ISSN 1823-6379

Adebisi, Adetayo A. and Maleque, Md. Abdul and Shah, Qasim Hussain (2011) Surface temperature distribution in a composite brake rotor. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi.

Adeleke, Sakiru Adekunle and Bushroa, Abdul Razak and Herliansyah, Muhammad Kusumawan and Sopyan, Iis and Basirun, Wan Jefrey and Ladan, Magaji (2018) Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique. Journal of Adhesion Science and Technology, 32 (1). pp. 91-102. ISSN 0169-4243 E-ISSN 1568-5616

Adesta, Erry Yulian Triblas and Hamidon, R. and Riza, Muhammad and Alrashidi, R. F.F.A. (2018) Investigation of tool engagement and cutting performance in machining a pocket. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Adesta, Erry Yulian Triblas and Muhammad, Riza (2010) Performance of cermet tools : applying negative rake angles high speed machining. LAP Lambert Academic Publish GmbH & Co, Germany. ISBN 3843374783

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and Agusman, Delvis and Yahuza, Rosehan (2009) Tool wear and surface finish investigation in high speed turning using cermet insert by applying negative rake angles. European Journal of Scientific Research, 38 (2). pp. 180-188. ISSN 1450-216X E-ISSN 1450-202X

Adesta, Erry Yulian Triblas and Riza, Muhammad and Ali, Mohammad Yeakub (2012) Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles. Applied Mechanics and Materials, 117-19. pp. 633-638. ISSN 1660-9336

Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohamad Yuhan and Hamidon, R. (2016) The effect of tool path strategies on cutting temperature and cutting force during pocket milling of AISI H13. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 337-344. ISSN 1819-6608

Adetayo A., Adebisi and Maleque, Md. Abdul (2010) Mold preparation for stir casting of aluminium matrix composite brake motor: a review. In: World Engineering Congress 2010, 2 - 5 August, 2010, Kuching, Sarawak.

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Afzal, Asif and A. D., Mohammad Samee and R. K., Abdul Razzak and Khan, Sher Afghan and Khan, Hurmatulla (2020) Optimum spacing between grooved tubes: an experimental study. Journal of Mechanical Science and Technology, 34 (1). pp. 469-475. ISSN 1226-4865

Afzal, Asif and Alshahrani, Saad and Alrobaian, Abdulrahman and Buradi, Abdulrajak and Khan, Sher Afghan (2021) Power plant energy predictions based on thermal factors using ridge and support vector regressor algorithms. Energies, 14 (7254). pp. 1-22. ISSN 1996-1073

Ahamed, Raju and Rashid, Muhammad Mahbubur and Islam, Jahidul and Javed, Asief and Md Yusof, Hazlina (2016) Energy generation from revolving door. Indian Journal of Science and Technology, 9 (19). pp. 1-6. ISSN 0974-6846 E-ISSN 0974-5645

Ahmad, Kartini and Hanouf, Zahir and Ishak, Anuar (2017) MHD casson nanofluid flow past a wedge with newtonian heating. European Physical Journal Plus, 132 (2). ISSN 2190-5444

Ahmad, Salmiah and Mohd Noor, Nurul Muthmainnah (2011) An electrooculugram signal acquisition for wheelchair motion control. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 163-170. ISBN 9789674181734

Ahmad, Salmiah and Tokhi, M. Osman (2011) Virtual modeling of two-wheeled wheelchair using MSc Visual Nastran 4D. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 231-242. ISBN 9789674181734

Ahmad, Salmiah and Tokhi, M. Osman (2011) A review on control of two-wheeled wheelchair system. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 112-120. ISBN 9789674181765

Ahmad, Zuraida and Halim, Zahurin (2013) Creativity and the future of engineering education: making the strange familiar. In: International Conference on Engineering Education 2013, 22nd-25th Dec. 2013, Madinah, Kingdom of Saudi Arabia.

Ahmad, Zuraida and Hermain, Hazwan Yatimi and Abdul Razak, Nur Humairah (2018) Characterizations and biodegradability of solvent casting halloysite nanotubes/sago starch nanocomposite. Journal of Engineering Science and Technology, 13 (Issue Special Issue on WRICET (2016)). pp. 86-93. ISSN 1823-4690

Ahmad Azhar, Ahmad Zahirani and Mohd Rosli, Muhammad Farhan and Manshor, Hanisah and Mohd Ali, Afifah (2019) The effect of dolomite addition onto the phases and hardness of zirconia toughened alumina. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel Kota Bharu, Kelantan; Malaysia.

Ahmad Azhar, Ahmad Zahirani and Mokhtar,, Mokhzani and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Effects of TiN single layer coating on the wear of ZTA cutting inserts and surface roughness of workpiece. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2016, 17-18 August, 2016, Dorsett Hotel, Putrajaya.

Ahmad Ghazilan, Ahmad Luqman and Mokhtar, Hanan and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Mohamed Ali, Jaffar Syed (2017) Tensile mechanical property of oil palm empty fruit bunch fiber reinforced epoxy composites. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kuala Lumpur.

Ahmad Shahrim, Nur’Aishah Ahmad and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Ahmad Azhar, Ahmad Zahirani (2020) Estimating suitable starch extraction from mango seeds using analytical hierarchy process (AHP) method. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd-24th July 2019, Kangar, Perlis.

Ahmed, Fharrukh and Khan, Sher Afghan (2018) Investigation of efficacy of low length-to-diameter ratio and nozzle pressure ratio on base pressure in an abruptly expanded flow. In: 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, 6 - 7 April 2018, Chennai, Tamilnadu; India.

Ahmed, Hamdi E. and Ahmed, Mirghani Ishak and Yusoff, Mohd Zamri (2015) Heat transfer enhancement in a triangular duct using compound nanofluids and turbulators. Applied Thermal Engineering, 91. pp. 191-201. ISSN 1359-4311

Ahmed, Mirghani Ishak and Abakrb, Yousif A. and Ismail, Ahmad Faris (2011) Developments on solar operated water desalination. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 163-168. ISBN 9789674181582

Ahmed, Mirghani Ishak and Hrairi, Meftah (2011) Thermal analysis of a micro device used for detection of colorectal cancer. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 220-228. ISBN 9789674181581

Ahmed, Mirghani Ishak and Hrairi, Meftah and Ismail, Ahmad Faris (2009) On the characteristics of multistage evacuated solar distillation. Renewable Energy, 34. pp. 1471-1478. ISSN 0960-1481

Ahmed, Mirghani Ishak and Ismail, Ahmad Faris and Abakr, Yousif Abdalla and Amin, A. K. M. Nurul (2007) Effectiveness of cryogenic machining with modified tool holder. Journal of Materials Processing Technology, 185 (1-3). pp. 91-96. ISSN 0924-0136

Ahmed, Musse Mohamud and Khalifa, Othman Omran (2019) Introduction to solar energy. In: Solar energy: fundamentals, inverters and systems. IIUM Press, Kuala Lumpur, pp. 1-15. ISBN 978-967-418-4827

Ahmed, Musse Mohamud and Khalifa, Othman Omran and Khan, Sheroz (2019) Solar energy integration. In: Solar energy fundamentals, inverters and systems. IIUM Press, Kuala Lumpur, pp. 62-78. ISBN 978-967-418-482-7

Ahmed, Shugata and Hasan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2015) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27 - 28 Oct 2015, Gombak. (Unpublished)

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2019) Experimental correlation for flow-boiling heat transfer in a micro-gap evaporator with internal micro-fins. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 1-8. ISSN 2289-7879

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hassan, Muhammad Hasibul (2016) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 410-414. ISSN 1819-6608

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2022) Effects of operating conditions on evaporation rate and wall shear stress development in a micro-gap heat sink with internal micro-fins. CFD Letters, 14 (2). pp. 1-9. ISSN 2811-3969

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Muhammad, Hasibul Hasan (2018) Two-phase fin-induced turbulent cooling for electronic devices using heat pump associated micro-gap Heat Sink. International Journal of Engineering & Technology, 7 (3.13). pp. 113-122. ISSN 2227-524X

Ahmed, Shugata and Hassan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2016) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. ARPN Journal of Engineering and Applied Sciences, 11 (1). 297 -302. ISSN 1819-6608

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, International Islamic University Malaysia (IIUM), Gombak, Kuala Lumpur.

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, Gombak Campus, IIUM. (Unpublished)

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Muhammad, Hasibul Hasan (2016) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 331-336. ISSN 1819-6608

Ahmed Mounis, Shawgi Younis and Zainul Azlan, Norsinnira (2019) Assist-as-needed control strategies for upper limb rehabilitation therapy: a review. Jurnal Mekanikal, 42. pp. 57-74. E-ISSN 2289-3873

Ahmed Mounis, Shawgi Younis and Zainul Azlan, Norsinnira and Sado, Fatai (2020) Assist-as-needed robotic rehabilitation strategy based on z-spline estimated functional ability. IEEE Access, 8. pp. 157557-157571. E-ISSN 2169-3536

Aibinu, Abiodun Musa and Salami, Momoh Jimoh Eyiomika and Shafie, Amir Akramin (2012) Artificial neural network based autoregressive modeling technique with application in voice activity detection. Engineering Applications of Artificial Intelligence, 25 (6). pp. 1265-1276. ISSN 0952-1976

Ajala, Mosud T. and Khan, Md. Raisuddin and Shafie, Amir Akramin and Salami, Momoh Jimoh Emiyoka and Nor, M. I. Mohamad Nor and Oladokun, M. O. Oladokun (2018) Optimization of CO2 production rate for fire-fighting robot applications using response surface methodology. Cogent Engineering, 5 (1). pp. 1-17. ISSN 2331-1916

Akhlaq, Adnan and Shaik Dawood, Mohd. Sultan Ibrahim and Jaffar Syed, Mohamed Ali and Sulaeman, Erwin (2023) A study on the effect of piezoelectric nonlinearity on the bending behaviour of smart laminated composite beam. Materials, 16 (7). pp. 1-19. E-ISSN 1996-1944

Akhtaruzzaman, M. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) A review on lower appendicular musculoskeletal system of human body. International Islamic University Malaysia Engineering Journal, 17 (1). pp. 83-102. ISSN 1511-788X E-ISSN 2289-7860

Akhtaruzzaman, Md. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2017) Quasi-inverse pendulum model of 12 DoF bipedal walking. International Journal of Automation and Computing, 14 (2). pp. 179-190. ISSN 1476-8186

Akmeliawati, Rini and Abdul Kareem, Samir A. and Muhida, Riza (2011) Visual-based intelligent solar tracking system. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 158-171. ISBN 9789674181765

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) The development of cost structuring of high speed hard turning. In: Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2015) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 4th International Conference on Advanced Computer Science Applications and Technologies, 8-10 December 2015, Kuala Lumpur, Malaysia.

Al Mahmud, Suaib and Ismail, Ahmad Faris and Bappy, Jamirul Habib and Noor, Wazed Ibne (2022) Mixture model for a parametric study on turbulent convective heat transfer of water-Al2O3 nanofluid. CFD Letters, 14 (2). pp. 42-58. ISSN 2811-3969

Al Mahmud, Suaib and Ismail, Ahmad Faris and Bappy, Jamirul Habib and Noor, Wazed Ibne (2023) A study on accuracy range of multiphase mixture model for turbulent convective heat transfer enhancement simulation of Water-Al2O3 Nanofluid. Journal of Nanofluids, 12 (2). pp. 438-447. ISSN 2169-432X E-ISSN 2169-4338

Al Mahmud, Suaib and Rahman Khan, Mazbahur and Ibne Noor, Wazed and Ismail, Ahmad Faris and Momin, Md. Abdul and Bappy, Jamirul Habib (2022) Turbulent convective heat transfer enhancement modeling of water-Al2O3 nanofluid using CFD mixture model and adaptive neural fuzzy inference system. numerical heat transfer, part b: fundamentals. pp. 1-19. ISSN 1040-7790 E-ISSN 1521-0626 (In Press)

Al-Ghamdi, Ahmed S. and Ali, Mohammad Yeakub (2012) Rheological and thermal behaviour of high impact polystyrene nanocomposite. Advanced Materials Research, 383. pp. 3849-3853. ISSN 1022-6680

Al-Khateeb, Khalid A. Saeed and Ismail, Sulastri and Uddin, Md. Jasim (2010) A capacitive micromachined ultrasonic transducer. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26-27 January 2010, Kuala Lumpur.

Al-Mamun, Abdullah and Onundi, Yusuf Bamidele and Al-Khatib, Ma An Fahmi Rashid (2010) Adsorption of lead from aqueous solution by a novel carbon based adsorbent. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Al-Turki , Abdullah and Faris, Waleed Fekry (2010) Modelling manufacturing process using a modified IDEF0 framework a case study of a car door manufacturing plant. International Journal of Engineering Systems Modelling and Simulation, 2 (4). pp. 234-241. ISSN 1755-9766

Al-khulaidi, Rami Ali and Akmeliawati, Rini and Zainul Azlan, Norsinnira and Abu Bakr, Nuril Hana and M. Fauzi, Norfatehah (2018) Development of robotic hands of signbot, advanced Malaysian sign-language performing robot. Advances in Robotics Research, 2 (3). pp. 183-199. ISSN 2287-4976 E-ISSN 2287-4984

AlAzemi, Ahmed S KH R Q and Che Daud, Mohd Radzi (2020) Preventive maintenance for effective operation of boilers in Kuwait industry. International Journal of Mechanical and Production Engineering Research and Development, 10 (2). pp. 987-1002. ISSN 2249–6890 E-ISSN 2249–8001

Alam, A. H. M. Zahirul and et. al., Fatima Fareeha (2010) DATICS-2010: Welcome message from workshop organizers: FutureTech 2010. In: 2010 5th International Conference on Future Information Technology, FutureTech 2010 - Proceedings , 21-23 May 2010, Busan, Korea.

Alam, Md. Shah and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Konneh, Mohamed (2010) Prediction and investigation of surface response in high speed end milling of Ti-6Al-4V and optimization by genetic algorithm. Advanced Materials Research, 83-86. pp. 1009-1015. ISSN 1022-6680

Alang Md Rashid, Nahrul Khair and Abang Mohamad Moasili, Dayang Nurulain and Johari, Intan Zaharah and Salleh, Azizullah (2011) Applications of mechatronics engineering in modern agriculture. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 29-33. ISBN 9789674181734

Alang Md Rashid, Nahrul Khair and Ameer Amsa, Mohamad Ghazali (2011) Energy harvesting for wide area sensor networks. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 1-7. ISBN 9789674181734

Alang Md Rashid, Nahrul Khair and Kader Mohideen, Safinaz (2011) Leveraging on nature for systems design. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 194-198. ISBN 9789674181734

Alang Md Rashid, Nahrul Khair and Manba Usama, Imama Karim (2011) Auto landmarks generation for SLAM algorithm. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 42-45. ISBN 9789674181734

Alang Md Rashid, Nahrul Khair and Nordin, Nor Hidayati Diana and Ajibola, Alim Sabur (2011) Sound identification in noisy environment. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 219-224. ISBN 9789674181734

Alang Md Rashid, Nahrul Khair and Rasheed, Aous Naji (2011) Self-repair capability in engineering systems. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 208-212. ISBN 9789674181734

Alao, Abdul-Raheed and Konneh, Mohamed (2011) Application of taguchi and box-behnken designs for surface roughness in precision grinding of silicon. International Journal of Precision Technology, 2 (1). pp. 21-38. ISSN 1755-2079 (O), 1755-2060 (P)

Albarody, Thar M. Badri and Al-Kayiem, Hussain H. and Faris, Waleed Fekry (2016) The transverse shear deformation behaviour of magneto-electro-elastic shell. Journal of Mechanical Science and Technology, 30 (1). pp. 77-87. ISSN 1738-494X E-ISSN 1976-3824

Aldausari, Muhammad Kh O and Faris, Waleed Fekry and Ghazaly, Nouby M. and Imihezri, Sharifah (2020) Development of vibration damper to reduce generated stress due to flow induced vibrations in pipeline. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (3). pp. 11657-11668. ISSN 2249–6890 E-ISSN 2249–8001

Aldheeb, M and Kafafy, Raed and Idres, Moumen and Omar, H. (2011) Particle swarm optimization of air-launch vehicle and trajectory. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia. (Unpublished)

Aldheeb, Mohammed and Kafafy, Raed and Idres, Moumen and Omar, Hanafy and Abido, Mohammad (2012) Design optimization of Micro Air Launch Vehicle using differential evolution. Journal of Aerospace Technology and Management, 4 (2). pp. 185-196. ISSN 1984-9648, 2175-9146

Aldousari, Meshal R. E. E. M and Okasha, Mohamed Elsayed Aly Abd Elaziz and Faris, Waleed Fekry and Ghazaly, Nouby M. (2020) Modeling and analysis of wastewater heat recovery system in Kuwait. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (3). pp. 7895-7910. ISSN 2249–6890 E-ISSN 2249–8001

Ali, Al-Hamdan and Nimir, Yassin Lutfi Mahmud and Mustafa, Ramadan J. (2010) Ballistic impact fracture behaviour of continuous fibre reinforced al-matrix composites. Jordan Journal of Mechanical and Industrial Engineering, 4 (5). pp. 605-614. ISSN 1995-6665

Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. CFD Letters, 10 (2). pp. 18-27. ISSN 2180-1363

Ali, Mohammad Yeakub (2011) Application of focused ion beam for machining of nanopillar sheet. Research Report. s.n. (Unpublished)

Ali, Mohammad Yeakub (2009) Development of micro end milling process for fabricating MEMS. Research Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2018) Dry electrical discharge machining: an environmental friendly machining process. In: 2018 9th International Conference on Manufacturing Science and Technology (ICMST 2018), 11th-13th August 2018, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2008) Focused ion beam machining of cell culture dish. In: ISE Seminar 2008, 3rd March 2008, Thailand. (Unpublished)

Ali, Mohammad Yeakub (2008) Focused ion beam micromachining of mems. In: International Symposium on Advanced Mechatronics Engineering, 29 February 2008, Changwon, S. Korea.

Ali, Mohammad Yeakub (2008) Geometrical integrity of microholes produced by micro-EDM. Research Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2017) Micro electro discharge machining for nonconductive ceramic materials. In: 2nd World Symposium on Mechanical and Control Engineering (WSMCE 2017), 2nd-3rd Dec. 2017, Guilin, China. (Unpublished)

Ali, Mohammad Yeakub (2008) Micro-drilling of metallic materials for microsystems technology. Project Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Micro-manufacturing technology: the huge opportunity of thinking small. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China.

Ali, Mohammad Yeakub (2011) Nanopillar Array for Cell Culture Dish. In: Seminar Nanopillar Array for Cell Culture Dish, 16 June 2011, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub (2011) Noble tool based micromilling for nanometric surface finish. Research Report. Ministry of Higher Education, Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Powder mixed micro electro discharge machining (PMμEDM). Project Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and -, Wan Emira Azaty and -, Nor Suriza (2011) Micro electro discharge machining of micro pillar array: process development. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, Malaysia, pp. 136-141. ISBN 9789674181628

Ali, Mohammad Yeakub and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2012) Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate. Advanced Materials Research, 383-. pp. 1759-1763. ISSN 1022-6680

Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2011) Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China. (Unpublished)

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Khan, Ahsan Ali (2008) Microengineering education in IIUM: challenges and successes. In: International Conference on MEMS and Nanotechnology, ICMN'08, 13-15 May 2008, Saloma Bistro and Theatre Restaurant, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Ammar, S. M. and Baayah, N. and Aishah, S. and Zaliha, S. and Hayati, N. (2006) Optimization of EDM parameters for micro/meso fabrication. In: 3rd BSME-ASME International Conference on Thermal Engineering, 20th-22nd December 2006, Dhaka, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub and Ayob, Mohd Hafiz and Mohd Isa, Saiful Adzli (2005) Developing a prototype micro hot embossing setup. In: 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 30 September - 2 October 2005, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.

Ali, Mohammad Yeakub and Banu, Asfana and Bakar, Mazilah Abu (2018) Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur.

Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.

Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Banu, Asfana and Shaffiq, Muhammad and Abd. Rahman, Mohamed and Konneh, Mohamed and Salehan, Muhammad (2018) Investigation of taper angle in dry micro wire EDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. E-ISSN 2278-0149 (In Press)

Ali, Mohammad Yeakub and Bohez, E. L. J. (2000) Knowledge-based approach for stretch blow molding. In: International Conference on Precision Engineering (ICoPE) 2000, 21-23 March 2000, Singapore.

Ali, Mohammad Yeakub and Bryan, N. K. A. and Hung, W. N. P. and Alauddin, M. and Yuan, S. (2001) Surface roughness of ion-sputtered micromold. In: International Conference on Mechanical Engineering (ICME) 2001, 26-28 December 2001, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2000) Simulation of micro-injection molding. In: International Conference on Precision Engineering (ICoPE) 2000, 21-23 March 2000, Singapore.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2001) Surface roughness of FIB sputtered silicon. In: Precision Engineering at the Beginning of a Millenium (ICPE), 18-20 July 2001, Yokohama, Japan.

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2000) Fabrication of micro cavities by micro electrical discharged machining. In: International Conference on Manufacturing (ICM) 2000, 24-26 February 2000, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2000) Fabrication of three dimensional micro-components – A review. In: 6th Annual Paper Meet & International Conference on Mechanical Engineering in the 21st Century , 17-19 February 2000, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2016) Micromachining. In: Comprehensive materials finishing. Elsevier, pp. 322-343. ISBN 9780128032497

Ali, Mohammad Yeakub and Hung, Wayne N.P. and Fu, Yongqi (2010) A review of focused ion beam sputtering. International Journal of Precision Engineering and Manufacturing, 11 (1). pp. 157-170. ISSN 2005-4602 (O), 1229-8557 (P),

Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2008) Nanotechnology education at undergraduate level: Malaysian scenario. In: National Seminar on Science, Technology and Social Sciences (STSS), 2nd-4th June 2008, Kuantan, Pahang.

Ali, Mohammad Yeakub and Jailani, Wan Norsyazila and Abd Rahman, Mohamed and Hassan, Muhammad Hasibul and Banu, Asfana (2017) Effect of minimum quantity lubrication on surface roughness in tool-based micromilling. IIUM Engineering Journal, 18 (1). pp. 147-154. ISSN 1511-788X E-ISSN 2289-7860

Ali, Mohammad Yeakub and Karim, A.N. Mustafizul and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Abdullah, 'Aisy Anuarin and Idris, Mohd Nazrol (2010) Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing, 11 (5). pp. 779-784. ISSN 2005-4602 (O), 1229-8557 (P),

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Othman, Khairul Irman and Omar, Mohd Aliff (2009) Micro end milling of AISI 304 stainless steel and analysis of micro surface roughness. In: Proceedings of the 2009 International Conference on Mechanical and Electrical Technology (ICMET'09), 8 - 11 August 2012, Beijing.

Ali, Mohammad Yeakub and Loo, Y. W. (2006) Sputtering of paraboloid microstructure using fib. In: International Conference on MEMS and Nanotechnology (ICMN'06), 15-16 March 2006 , Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, Asfana and Sabur, Abdus and Debnath, Sujan (2018) Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017), 23rd-25th July 2017, Hong Kong, China.

Ali, Mohammad Yeakub and Mass Duki, Siti Hamizah and Mansor, Noor Adila (2011) Minimum chip thickness in machining MEMS structure using Tool Based Micromilling. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Fadila, N. and Hannah, N. (2013) Investigation of burr in high speed microdrilling. Applied Mechanics and Materials, 278. pp. 389-392. ISSN 1660-9336

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Khan, Ahsan Ali and Asfana, Banu and Lutfi, M. and Fahmi, M. I. (2013) Empirical modelling of vibration in micro end milling of PMMA. World Applied Sciences Journal , 21 (1). pp. 73-78. ISSN 1818-4952

Ali, Mohammad Yeakub and Mohammad, Ammar Sami (2008) Experimental study of conventional wire electrical discharge machining for microfabrication. Materials and Manufacturing Processes, 23 (7). pp. 641-645. ISSN 1042-6914

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Bio-MEMS Nanostructure by focused ion beam. In: International Conference on the Advancement of Materials and Nanotechnology, 29 Nov-1 Dec 2010, Prince Hotel, Kuala Lumpur.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: UNSPECIFIED.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of micropillar sheet for cell culture dish. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of silicon nanopillar sheet for Cell Culture Dish. Advanced Materials Research, 264. pp. 1352-1356. ISSN 1022-6680

Ali, Mohammad Yeakub and Mohd. Hajar, Nurul Hajar (2011) Fabrication of Micropillar Sheet for Cell Culture Dish. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and N.I, Rashidah and N.A, Azima (2007) Wire electrical discharge machining for microfabrication. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Ngoi, B. K. A. and Hung, N. P. and Yuan, S. and Lee, C.P. (2001) Hot embossing and injection molding of three-dimensional microcomponents. In: BSME-ASME International Conference on Thermal Engineering, 31 December 2001 - 02 January 2002, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Ngoi, Brian K. A. (2003) Mass-replication of micro-components. Forward. p. 6.

Ali, Mohammad Yeakub and Omar, Mohd Aliff and Othman, Khairul Irman and Hung, Wayne N.P. (2009) Prediction of burr formation in fabricating MEMS components by micro end milling. In: International Conference on Materials for Advanced Technologies (ICMAT), 28 June - 03 July, Singapore.

Ali, Mohammad Yeakub and Ong, A. S. and Konneh, Mohamed (2005) Micromilling of tungsten carbide using focused ion beam. In: International Conference on Mechanical Engineering 2005 (ICME2005), 28-30 December 2005, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Reyad, Mehfuz (2007) Design and fabrication of micro swiss-roll combustor mold by micro EDM milling. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 12-13 Dec. 2007, Culture Activity Centre (CAC), IIUM . (Unpublished)

Ali, Mohammad Yeakub and Reyad, Mehfuz and Khan, Ahsan Ali and Ismail, Ahmad Faris (2005) Micro Electro Discharge Milling for Microfabrication. In: Micromachining. In-Tech, Croatia, pp. 1-28. (In Press)

Ali, Mohammad Yeakub and Rosfazila, M. R. and Rosnita, E. (2008) Geometrical integrity of microholes drilled by conventional and micro electrical discharge machining. In: "Advanced Design and Manufacture to Gain a Competitive Edge: New Manufacturing Techniques and their Role in Improving Enterprise Performance", 14- 16 January 2008, Sanya, Hainan; China.

Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2017) Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2). pp. 90-94. ISSN 2405-4623

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2018) Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology, 7 (3). pp. 32-39. E-ISSN 2227-524X

Ali, Mohammed A.H. and Radzak, Muhammad S.A. and Mailah, Musa and Yusoff, Nukman and Abd Razak, Bushroa and Ab. Karim, Mohd Sayuti and Ameen, Wadea and A. Jabbar, Waheb and Alsewari, AbdulRahman A. and Rassem, Taha H. and Nasser, Abdullah B. and Abdulmolla Abdulghafor, Rawad Abdulkhaleq (2021) A novel inertia moment estimation algorithm collaborated with active force control scheme for wheeled mobile robot control in constrained environments. Expert Systems With Applications, 183. pp. 1-29. ISSN 0957-4174

Ali, Muhammad Aminuddin Anwar and Zainul Azlan, Norsinnira (2016) Design of iris mechanism for flexion and extension training in hand rehabilitation. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4115-4122. E-ISSN 1819-6608

Ali, Muhammad Aminuddin Anwar and Zainul Azlan, Norsinnira and Mohd Safian, Kamil Alif (2016) Development of low-cost robotic hands for introduction to mechatronics engineering courses. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6222-6227. E-ISSN 1819-6608

Ali, Said and Islam, Mazharul and Mohiuddin, A. K. M. and Idres, Moumen (2019) Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 153-157. ISSN 2277-3878 E-ISSN 2249-8958

Alkathiri, A A and Zainul Azlan, Norsinnira (2017) Control of cooperative manipulators in holding deformable objects. In: 6th International Conference on Mechatronics 2017 (ICOM'17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Alkharasani, Batool Abdulsamad and Hassan, Mohd Khair and Akmeliawati, Rini and Zafira, Ribhan (2016) PID-sliding surface based sliding mode controller for anti-lock braking system of electric vehicle. Advanced Science Letters, 22 (10). pp. 2734-2737. ISSN 1936-6612 E-ISSN 1936-7317

Alqap, Asep Sofwan F. and Sopyan, Iis and Zubir, S. A. (2010) Concentration effect of aqueous synthesis on biphasic hydroxyapatite - β-tricalcium phosphate composition. Advanced Materials Research, 93-94. pp. 405-408. ISSN 1022-6680

Altaf, A. and Omar, Ashraf and Asrar, Waqar (2022) Passive drag reduction of the square back truck body. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). pp. 9892-9908. ISSN 2229-8649 E-ISSN 2180-1606

Amanullah Tomal, Abu Naser Mohammad and Saleh, Tanveer and Khan, Md. Raisuddin (2018) Combination of fused deposition modelling with abrasive milling for attaining higher dimensional accuracy and better surface finish. IIUM Engineering Journal, 19 (2). pp. 221-231. ISSN 1511-788X E-ISSN 2289-7860

Amid, Azura and Ahmad Hassan, Nurhidayah and Abu Samah, Norshahida (2010) A real-time PCR technique in the identification of over-stunned slaughtered chicken. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Amin, A. K. M. Nurul and Abd Aziz, Amir Akhyar and Mahmud, Md. Asif (2011) A new method for chatter suppression and improvement of surface roughness in end milling of mild steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 83-90. ISBN 9789674181758

Amin, A. K. M. Nurul and Abdelgadir, M. and Kamaruddin, K. (2011) Some aspects of improved machinability in preheated machining of Titanium alloy Ti-6Al-4V. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 19-26. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Ahmad Dalhan, Salha and Sahidin @ Saleudin, Salhana (2011) Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 65-73. ISBN 9789674181758

Amin, A. K. M. Nurul and Alam, S. and -, Syedatul Akma (2011) Optimization of surface roughness in high speed end milling of Titanium alloy Ti-6Al-4V under dry conditions. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 181-187. ISBN 9789674181758

Amin, A. K. M. Nurul and Ali Asharariff, Mohd Amar and -, Syadatul Akma (2011) Application of permanent electromagnet for chatter control in end milling of medium carbon steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 91-97. ISBN 9789674181758

Amin, A. K. M. Nurul and Arif, Muammer Din and Subir, Siti Aminatuzzuhriyah B. Haji and Abdullah, Fawaz Mohsen (2015) Magnetic damping in turning of stainless steel aisi 304 for the reduction of machining vibration and tool wear. Advanced Materials Research, 1115. pp. 100-103. ISSN 1662-8985

Amin, A. K. M. Nurul and Dali, Mohd Hasani and Mahmud, Md. Asif (2011) High speed end milling of single crystal silicon using diamond coated tools. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 217-223. ISBN 9789674181758

Amin, A. K. M. Nurul and Dolah, Shuriani and Mahmud, Marlina and Lajis, M. A. (2008) Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2. Journal of Materials Processing Technology, 201 (1-3). pp. 466-470. ISSN 0924-0136

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo and Ishtiyaq, M. H. (2011) Modeling for surface roughness in end-milling of Titanium alloy Ti-6Al-4V using uncoated WC-Co inserts. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 161-166. ISBN 9789674181758

Amin, A. K. M. Nurul and Hafiz, A.M. Khalid and Lajis, M. A. (2011) Development of tool life prediction model of TiAlN coated tools during the high speed hard milling of AISI H13 steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 155-160. ISBN 9789674181758

Amin, A. K. M. Nurul and Hafiz, A.M. Khalid and Lajis, M. A. (2011) Modeling of surface roughness during end milling of AISI H13 hardened tool steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 167-173. ISBN 9789674181758

Amin, A. K. M. Nurul and Hafiz, A.M.K. and Lajis, M.A. and Patwari, Anayet U. (2010) Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel. Advanced Materials Research, 83-86. pp. 190-197. ISSN 1022-6680

Amin, A. K. M. Nurul and Hossain, Ishtiaq and Patwari, Muhammed Anayet Ullah (2011) Wear mechanism in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 239-245. ISBN 9789674181758

Amin, A. K. M. Nurul and Hossain, Mohammad Ishtiyaq and Patwari, Anayet Ullah (2012) Enhancement of machinability of Inconel 718 in end milling through online induction heating of workpiece. Advanced Materials Research, 415-41. pp. 420-423. ISSN 1662-8985

Amin, A. K. M. Nurul and Jaafar, Israd Hakim and Patwari, Muhammed Anayet Ullah and Zubaire, W. W. D. (2010) Role of discrete nature of chip formation and natural vibration of system components in chatter formation during metal cutting. IIUM Engineering Journal, 11 (1). pp. 124-138. ISSN 1511-788X

Amin, A. K. M. Nurul and Kamaruddin, K. and Abdelgadir, M. (2011) Influence of workpiece preheating on chatter and machinability of Titanium alloy - Ti6Al4V. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, pp. 1-8. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Khalid, Noor Syairah and Mohd. Nasir, Siti Nurshahida (2011) High speed end milling of silicon using diamond coated tools with air blowing. In: Invention, Innovation and Technology Exhibition (ITEX) 2011, 20-22 May 2011, Kuala Lumpur, Malaysia.

Amin, A. K. M. Nurul and Khalid, Noor Syairah and Mohd. Nasir, Siti Nurshahida (2011) High speed end milling of silicon using diamond coated tools with air blowing. In: IIUM Research, Invention and Innovation Exhibition 2011 (IRIIE 2011), 9-10 February 2011, Kuala Lumpur, Malaysia.

Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul (2011) Tool wear and surface roughness aspects in heat assisted end milling of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 35-42. ISBN 9789674181758

Amin, A. K. M. Nurul and Mahmoud, Asif (2011) Development of a mathematical model for the prediction of surface roughness in end milling of stainless steel SS 304. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 133-142. ISBN 9789674181758

Amin, A. K. M. Nurul and Mahmud, Md. Asif and Arif, Muammer Din and Derus, Nur Hidayah and Khamis, Siti Salwa (2012) Development of a novel zero point setting device for high speed and micro machining applications. In: IIUM Research, Invention and Innovation Exhibition 2012 (IRIIE 2012), 21 - 22 February, 2012, Kuala Lumpur, Malaysia. (Unpublished)

Amin, A. K. M. Nurul and Mohd, Ahmad Azhari and Hadi, Abdul Qayyum (2011) The method of chatter suppression in end milling operation. In: IIUM Research, Invention and Innovation Exhibition 2011 (IRIIE 2011), 9-10 February 2011, Kuala Lumpur, Malaysia.

Amin, A. K. M. Nurul and Mohd Nasir, Siti Nurshahida and Khalid, Noor Syairah (2011) Implementation of high speed of silicon using diamond coated tools with air blowing. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 225-231. ISBN 9789674181758

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Ab. Razak, Nur Hayati (2011) Machinability aspects in heat assisted machining of hardened steel AISI H13 using coated carbide tool. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 27-33. ISBN 9789674181758

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Patwari, Muhammed Anayet Ullah and Abdul Razak, Nurhayati (2010) A new technique to improve the machinability of hardened steel AISI H13 in end milling. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Patwari, Muhammed Anayet Ullah and Hazim, A. and Adlan, Z. (2011) Comparison of machinability of ceramic insert in room temperature and cryogenic cooling conditions during end milling inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 209-215. ISBN 9789674181758

Amin, A. K. M. Nurul and Omar, A.A. Che and Kamal, M.A. Mohammed and Nassar, Mahmoud M.A. and Mohd Zaib, Noor Fathiah and Arif, Muammer Din (2015) Achievement of ductile regime machining in high speed end milling of soda lime glass by using tungsten carbide tool insert. Advanced Materials Research, 1115. pp. 39-42. ISSN 1662-8985

Amin, A. K. M. Nurul and Omar, A.A. Che and Kamal, M.A.Mohammed and Nassar, Mahmoud M.A. and Zaib, N.F. Mohd and Arif, Muammer Din (2015) Effect of cutter diameters on surface roughness attained in high speed end milling of soda lime glass. Advanced Materials Research, 1115. pp. 51-54. ISSN 1662-8985

Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Resonance effect in chatter formation in metal cutting. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-0447-3

Amin, A. K. M. Nurul and Subir, Siti Aminatuzzuhriyah B. Haji and Arif, Muammer Din (2015) Optimization of Tool Wear using Coupled RSM-GA Approach in Turning of Stainless Steel AISI 304 with Magnetic Damping of Tool Shank. Advanced Materials Research, 1115. pp. 117-121. ISSN 1662-8985

Amin, A. K. M. Nurul and Sulaiman, Syidatul Akma (2012) A novel method for chatter control and improvement of surface finish in end milling. In: IIUM Research, Invention and Innovation Exhibition 2012 (IRIIE 2012), 21-22 February, 2012, Kuala Lumpur, Malaysia. (Unpublished)

Amin, A. K. M. Nurul and Zakaria, Ahmad Farhan and -, Syadatul Akma (2011) Application of permanent electromagnet for chatter control in end milling of Titanium alloy - Ti6Al4V. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 99-106. ISBN 9789674181758

Aminanda, Yulfian (2012) Impact study on aircraft type laminate composite plate: experimental, failure criteria and element model review. In: Damage and fracture of composite sand structure. Advanced structure materials, 17 (17). Springer - Verlag, Berlin Germany, pp. 157-186. ISBN 9783642236587

Aminanda, Yulfian and Abd Kadir, Nurdina and Shaik Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2016) Experimental study on energy absorption of foam filled kraft paper honeycomb subjected to quasi-static uniform compression loading. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8-9 Nov 2016, Kuala Lumpur.

Aminanda, Yulfian and Abdullah, Nor Fazilah and Abdul Rahman, Noor Izzah (2011) Experimental study of indentation on composite structure. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 86-92. ISBN 978-967-418-148-2

Aminanda, Yulfian and Abdullah, Nor Fazilah and Abdul Rahman, Noor Izzah (2011) Simulation study of composite structure subjected to 3 point bending load. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 93-100. ISBN 9789674181482

Aminanda, Yulfian and Castanie, Bruno and Barrau, Jean-Jacques and Thevenet, Pascal (2005) Experimental analysis and modeling of the crushing of honeycomb cores. Applied Composite Materials, 12. pp. 213-227. ISSN 0929-189X

Aminanda, Yulfian and Edy Sutjipto, Agus Geter and Adesta, Erry Yulian Triblas and Castanie, Bruno (2011) Simulation of compression and spring back phenomena of sandwich structure with honeycomb core subjected to low energy and low velocity impact. Key Engineering Materials, 462-63. pp. 1296-1301. ISSN 1662-9795

Aminanda, Yulfian and Esa, Mir Amirul Shah and Said Mohamed, Said Hamadi (2011) Fabrication and testing of IIUM aircraft fuselage structure made of composite laminate material. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 8-15. ISBN 978-967-418-148-2

Aminanda, Yulfian and Hamid, Wan Luqman Hakim (2011) Experimental study of energy absorption capability of metallic-palm fiber-metallic hybrid composite plate. Advanced Material Research, 311-13. pp. 68-71. ISSN 1662-8985

Aminanda, Yulfian and Idzwein, Muhammad and Najib, Najwan (2011) Design and fabrication of fuselage model for laboratory purpose. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 16-23. ISBN 978-967-418-148-2

Aminanda, Yulfian and Idzwein, Muhammad and Najib, Najwan (2011) Simulation of fuselage model for laboratory purpose. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 24-29. ISBN 978-967-418-148-2

Aminanda, Yulfian and Ismail, N. (2011) Composite failure mechanism of corrugated hybrid composite subjected to bending loading. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 70-78. ISBN 978-967-418-148-2

Aminanda, Yulfian and Ismail, N. (2011) Determination of mechanical properties of corrugated hybrid composite. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 63-69. ISBN 978-967-418-148-2

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2011) Grain refinement practices in ferritic stainless steel welds. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 48-52. ISBN 9789674181642

Ang, Bee Chin and Yaacob, Iskandar Idris (2010) Preparation of maghemite-silica nanocomposites using sol-gel technique. Advanced Materials Research, 97-101. pp. 2140-2143. ISSN 1022-6680

Ang, Beechin and Yaacob, Iskandar Idris and Wong, Yew Hoong and Wong, Yew Hoong (2014) Phase and surface area studies of maghemite nanoparticles dispersed in silica gel. Materials Research Innovations, 18. S6-32-S6-35. ISSN 1432-8917 E-ISSN 1433-075X

Ani, Mohd Hanafi and Othman, Raihan (2011) Measurement of oxygen permeability in bulk alloys by internal oxidation of dilute constituent. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 98-103. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Principle of solid electrolyte oxygen sensor. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 110-115. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Recent trend in application of high temperature ferritic Fe-Cr alloys in power plant. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 92-97. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Recent trend on application of high temperature ferritic Fe-Cr alloys in solid oxide fuel cells. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 104-109. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Surface oxygen potential on the oxide scale during high temperature oxidation of Fe-Cr alloys at 1073 K. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 116-120. ISBN 9789674181642

Arham, Muhammad and Syed Mokhtar, Syed Zulfauzi and Khalifa, Othman Omran (2011) Development of wearable reflectance pulse oximetry for telehealth monitoring system. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 77-82. ISBN 9789674181710

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hannaf, Riyadh Ali Abdullah and Hilmy, Irfan (2020) A design consideration of heated bed's rapid levelling tool based on von misses stress using FEA simulation. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, 4 February - 9 April 2020, Dubai; United Arab Emirates.

Ariff, Tasnim Firdaus and Ahmad Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, S.N. and Zahari, S.Z. and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2013) Design improvements and fabrication of conveyor belt cleaner and washing system at Westports Malaysia. International Journal of Education and Research, 1 (10). pp. 11-26. ISSN 2201-6333 (Print) ISSN: 2201-6740 (Online)

Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2020) A systematic study of rheological properties of waterironoxide nanofluids with graphene nanoflakes. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11th - 14th December 2019, Bangkok, Thailand.

Arsah, Mohamad A and Syed Mohd Yusoff Sobbry, Syed Mohd Albaqir and Tuan Kamaruddin, Tengku Nordayana Akma and Osman, Azmi (2020) Improvement of a lightweight aluminium cylinder block design using finite element stress analysis. International Journal of Integrated Engineering, 12 (5). pp. 34-42. ISSN 2229-838X

Asad A., Khalid and Abdulgani M., Albagul and Waleed Fekry, Faris and Godem A., Ismail (2006) An experimental study on steel and Teflon squeeze film dampers. Shock and Vibration, 13 (1). pp. 33-40. ISSN 1070-9622

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar (2018) Active control of base pressure with counter clockwise rotating cylinder at Mach 2. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2020) Position of static cylinder effect on base flows. In: 1st International Conference on Data Science, Machine Learning and Applications, 2019, 29th - 30th March 2019, Hyderabad, India.

Ascroft, Helen and Barnes, Stuart and Dahnel, Aishah Najiah and Gupta, Aniruddha and Abd Halim, Nor Farah Huda and Ray, David (2016) Ultrasonic assisted machining. In: The 17th International Conference on Machine Design and Production, 12th - 15th July 2016, Bursa, Turkiye.

Asmadi, M. Solleh and Md. Kasmani, Ruhaila and Siri, Zailan and Saleh, Habibis and Mt Aznam, Suazlan (2023) Relevance of various cavity aspect ratios to the thermal behavior of natural convection heat transfer for water-based hybrid nanofluid within a U-shaped enclosure. In: 14. International Conference on Computational Heat and Mass Transfer, 4-8 September 2023, Düsseldorf, Germany. (Unpublished)

Asrar, Waqar (2011) The IIUM low speed wind tunnel: a historical perspective. University Archives Publication Series (2). IIUM Press, Kuala Lumpur. ISBN 9789674180263

Asrar, Waqar and Baig, M F and Khan, S A (1998) Chaos in wraparound fin projectile motion. AIAA Journal, 21 (2). pp. 354-356. ISSN 0001-1452

Asri, R. I M and Harun, W. S W and Hassan, Mas-Ayu and Che Ghani, S. A and Buyong, Zunariah (2016) A review of hydroxyapatite-based coating techniques: Sol-gel and electrochemical depositions on biocompatible metals. Journal of the Mechanical Behavior of Biomedical Materials, 57. pp. 95-108. ISSN 1751-6161

Astuti, Winda and Alimuddin, R. and Aibinu, Abiodun Musa and Salami, Momoh Jimoh Eyiomika and Martono, Wahyudi (2011) Mathematical model for three tank system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 88-97. ISBN 9789674181734

Astuti, Winda and Azlan, N. F. and Aibinu, Abiodun Musa and Salami, Momoh Jimoh Eyiomika and Martono, Wahyudi (2011) Development of automatic rocking baby cradle. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 141-148. ISBN 9789674181734

Astuti, Winda and A. R., Kasim and Solihin, Mahmud Iwan and Aibinu, Abiodun Musa and Salami, Momoh Jimoh Emiyoka and Martono, Wahyudi (2011) Design and prototyping of inertia wheel. In: Mechatronics book series: system design and signal processing. IIUM Press, Kuala Lumpur, pp. 73-79. ISBN 9789674181734

Awang, Mohamad and Wan Mohd, Wan Roslina and Sarifuddin, Norshahida (2019) Study the effects of an addition of titanium dioxide (TiO2) on the mechanical and thermal properties of polypropylene-rice husk green composites. Materials Research Express, 6 (7). E-ISSN 2053-1591

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19-20 September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 241-245. ISSN 2277-3878

Azami, Muhammad Hanafi and Kafafy, Raed and Idres, Moumen (2013) Simulation of wheel type fuel grain in hybrid rocket motor. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Azami, Muhammad Hanafi and Noorazman, Zahid and Savill, Mark and Li, Yi-Guang and Hilmi, Mohd Radzi (2019) Modelling the performance and emission prediction of RB211 aero-gas turbine engine fuelled by Jatropha-based biofuel. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

B

Bagum, Mst. Nasima and Konneh, Mohamed and Abdullah, Kasim Abdulrahman. . and Ali, Mohammad Yeakub (2018) Chip morphology as a performance predictor during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.

Bagum, Mst. Nasima and Konneh, Mohamed and Ali, Mohammad Yeakub (2018) Establishing relationship between process parameters and temperature during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Bajaber, Aiman Omar and Abdul Muthalif, Asan Gani and Elzubair, Ayman S. I (2011) Active suspension system: part 1 - mathematical modelling. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 322-326. ISBN 9789674181765

Banu, Aalya and Abdul Muthalif, Asan Gani (2015) Estimating perturbation in eigenvalues for robust vibration controller design: analytical derivation and simulation. International Journal of Engineering Systems Modelling and Simulation, 7 (2). pp. 95-102. ISSN 1755-9766

Banu, Aalya and Abdul Muthalif, Asan Gani (2017) Robust vibration control of flexible panel:modeling and simulation. World Journal of Engineering, 14 (5). pp. 433-442. ISSN 1708-5284

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Konneh, Mohamed (2020) Stability of micro dry wire EDM: OFAT and DOE method: OFAT and DOE method. International Journal of Advanced Manufacturing Technology, 106 (9-10). pp. 4247-4261. ISSN 02683768

Begum, Shahida and Karim, A.N. Mustafizul and Nainer, Mohamed Ansari M. and Sevah, Sukhana (2012) Analysis of end crack in boiler tube. Advanced Materials Research, 576. pp. 749-752. ISSN 1662-8985

Begum, Shahida and Karim, A.N. Mustafizul and Shafi, M. A. (2012) Investigation on wall thinning and creep damage in boiler tube due to scale formation. Advanced Materials Research, 538. pp. 1781-1784. ISSN 1662-8985

Bello, Musa Mohammed and Shafie, Amir Akramin and Khan, Md. Raisuddin (2015) Electro-hydraulic PID force control for nonlinear vehicle suspension system. International Journal of Engineering Research & Technology (IJERT), 4 (1). pp. 517-524. ISSN 2278-0181

Bello, Musa Mohammed and Shafie, Amir Akramin and Khan, Md. Raisuddin (2015) Off-Road vehicle suspension performance improvement using linear quadratic regulator techniques. In: International Conference on Mechanical And Industrial Engineering (ICMAIE’2015), 8-9 February 2014, Kuala Lumpur.

Bhuiyan, Moinul and Shihab, Baten (2014) Development of copper based miniature electrostatic actuator using WEDM with low actuation voltage. Microsystem Technologies, 20 (12). ISSN 0946-7076 (In Press)

Billah, Md. Masum and Khan, Md. Raisuddin and Ahmed, Mohiuddin and Shafie, Amir Akramin (2012) Reconnaissance mission: development of an algorithm for indoor localisation system with collaborative multi-robot. In: The World Congress on Engineering 2012, 4 - 6 July 2012, United Kingdom. (Unpublished)

Bolad, Tarek Mohamed and Nik Hashim, Nik Nur Wahidah and Mohamad Hanif, Noor Hazrin Hany (2018) Color recognition wearable device using machine learning for visually impaired person. IIUM Engineering Journal, 19 (2). pp. 213-220. ISSN 1511-788X E-ISSN 2289-7860

Boughou, Smail and Omar, Ashraf Ali and Elsyed, Omer A. and Aldheeb, Mohammed (2022) Numerical investigations of Aerodynamic characteristics prediction of high-lift low reynolds number airfoil. CFD Letters, 14 (2). pp. 111-121. E-ISSN 2180-1363

Boughoue, Smail and Omar, Ashraf A. and Elsayed, Omer Ali and Boukharfan, Radouan and Mohammed Aldheeb, Mohammed Abdulmalek (2022) Low Reynolds number effect on CFD prediction of bio inspired aerodynamics. In: AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022, 3rd-7th January 2022, San Diego.

Buys, Yose Fachmi and Ahmad, Mimi Syakina and Anuar, Hazleen and Mahmud, Mudrikah Sofia and Mohd Nasir, Nur Aimi (2020) Mechanical properties, morphology, and hydrolytic degradation behavior of poly lactic acid/thermoplastic polyurethane blends. IIUM Engineering Journal, 21 (1). pp. 193-201. ISSN 1511-788X E-ISSN 2289-7860

C

Castanie, Bruno and Aminanda, Yulfian and Barrau, Jean-Jacques and Thevenet, Pascal (2012) Discrete modeling of the crushing of nomex honeycomb core and application to impact and post-impact behavior of sandwich structures. In: Dynamic failure of composite and sandwich structures. Solid Mechanics and Its Applications, 192 (192). Springer Science+Business Media Dordrecht, Dordrecht Germany, pp. 427-489. ISBN 9789400753297 (O), 9789400753280 (P)

Castanie, Bruno and Aminanda, Yulfian and Schwob, Cyrille (2012) Modelling of impact on sandwich structure for fast maintenance loops. In: ICAS 2012 ( International Conference on Aerospace Science 2012, 23 - 28 September 2012, Brisbane Australia. (In Press)

Castanie, Bruno and Bouvet, Christophe and Aminanda, Yulfian and Barrau, Jean-Jacques and Thevenet, Pascal (2008) Modelling of low-energy/low-velocity impact on Nomex honeycomb sandwich structures with metallic skins. International Journal of Impact Engineering, 35 (7). pp. 620-634. ISSN 0734-743X

Che Ghani, Nor Artisham and Mt Aznam, Suazlan (2019) A numerical solution for heat transfer past a stretching sheet with ohmic dissipation and suction or injection problem using Haar wavelet quasilinearization method. In: 5th International Conference on Mathematical Applications in Engineering (ICMAE’19), 30th-31st October 2019, Putrajaya. (Unpublished)

Che Suhaimin, Safiuddin and Azmi, Nur Liyana and Rahman, Md Mozasser and Md Yusof, Hazlina (2019) Analysis of point-to-point robotic arm control using PID controller. In: "7th International Conference on Mechatronics Engineering, ICOM 2019", 30 - 31 Oct. 2019, Putrajaya, Malaysia.

Chebil, Jalel and Hrairi, Meftah and Abushikhah, Nazih (2011) Signal analysis of vibration measurements for condition monitoring of bearings. Australian Journal of Basic and Applied Sciences, 5 (1). pp. 70-78. ISSN 1991-8178

Chebil, Jalel and Hrairi, Meftah and Abushikhah, Nazih (2010) Signal analysis of vibration measurements for condition monitoring of bearings. In: International Conference on Mathematical Applications in Engineering (ICMAE’10), 3 - 4 Aug, 2010, Kuala Lumpur.

Chee, Ching Yern and Yaacob, Iskandar Idris (2010) Influence of nanosilica/polyurethane composite coating on IR effectiveness and visible light transmission properties of polyethylene. Advanced Materials Research, 97-101. pp. 1669-1672. ISSN 1022-6680

Chiew, Yeong Shiong and Tan, Chee Pin and Chase, Geoffrey and Chiew, Yeong Woei and Desaive, Thomas and Md Ralib, Azrina and Mat Nor, Mohd Basri (2018) Assessing mechanical ventilation asynchrony through iterative airway pressure reconstruction. Computer Methods and Programs in Biomedicine, 157. pp. 217-224. ISSN 0169-2607

Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ahmad, Kartini and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) High-order approximate solutions of strongly nonlinear cubic-quintic Duffing oscillator based on the harmonic balance method. Results in Physics, 7. pp. 3962-3967. E-ISSN 2211-3797

Chua, K.J. and Islam, Rafiqul (2015) On the experimental study of composite dessicants for energy efficient air dehumidification. IIUM Engineering Journal, 16 (2(SI)). pp. 1-11. ISSN 1511-788X E-ISSN 2289-7860

D

Dabhade, Ameya and Pathan, Khizar Ahmed and Khan, Sher Afghan and Jadhav, Akash (2020) Design and development of chassis for formula student vehicle. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (10). pp. 1121-1130. ISSN 0976-6480 E-ISSN 0976-6499

Dahnel, Aishah Najiah and Abdul Ghani, Muhamad Ali and Raof, Natasha A. and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Analysis of defects on machined surfaces of aluminum alloy (Al 7075) using imaging and topographical techniques. International Journal of Metrology and Quality Engineering (IJMQE), 13. pp. 1-8. ISSN 2107-6839 E-ISSN 2107-6847

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2020) An investigation of hole quality during drilling of carbon fibre reinforced plastic and titanium (Ti6Al4V) using tungsten carbide drills. In: 4th Advanced Materials Conference 2018 (AMC 2018), 27th - 28th November 2018, Kuching, Sarawak, Malaysia.

Dahnel, Aishah Najiah and Barnes, Stuart and Kibbler, Christopher and Ascroft, Helen (2015) Study of cutting forces and surface roughness in milling of Carbon Fibre Composite (CFC) with conventional and pressurized CO2 cutting fluids. In: ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, 13th-19th November 2015, Houston, Texas, USA.

Dahnel, Aishah Najiah and Fauzi, Muhammad Haziq and A. Raof, Natasha and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid. In: Third International Conference on Recent Advances in Materials and Manufacturing 2021, 25-26 November 2021, India.

Dahnel, Aishah Najiah and Fauzi, Muhammad Haziq and A. Raof, Natasha and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid. Materials Today: Proceedings, 59 (2022). pp. 808-813. ISSN 22147853

Dahnel, Aishah Najiah and Naiman, Mohamad Noor Ikhwan and Mohd Farid, Muhammad Azim Mirza and Abdul Rahman, Ahmad Faris and Meera Mydin, Nur Munirah (2022) Drilling of 7075 Aluminum Alloys. In: Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications. Intech Open. (In Press)

Dahnel, Aishah Najiah and Naiman, Mohamad Noor Ikhwan and Mohd Farid, Muhammad Azim Mirza and Abdul Rahman, Ahmad Faris and Meera Mydin, Nur Munirah (2022) Drilling of 7075 aluminum alloys. In: Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications. Intech Open. (In Press)

Danzomo, Bashir Ahmed and Salami, Momoh Jimoh Eyiomika and Khan, Md. Raisuddin and Mohd Nor, Mohd Ishkandar (2013) CFD based parametric analysis of gas flow in a counter-flow wet scrubber system. International Journal of Environmental Protection and Policy, 1 (2). pp. 16-23. ISSN 2330-7536 (O), 2330-7528 (P)

Darsivan, Fadly Jashi and Martono, Wahyudi and Faris, Waleed Fekry (2009) Active engine mounting control algorithm using neural network. Shock and Vibration, 16. pp. 417-437. ISSN 1070-9622

Daud @ Ab Aziz, Nur Sofwati and A. Raof, Natasha and Ghani, Abdul Rahman and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2020) Cutting tool performance in turning of AL 7075-t651 aluminium alloy. IIUM Engineering Journal, 21 (2). pp. 177-185. ISSN 1511-788X E-ISSN 2289-7860

Delvi, Hamza Afser and Faheem, Mohammed and Aabid, Abdul and Math, M.C. and Khan, Sher Afghan (2020) Investigation of characteristics of spark ignition engine fuelled with ethanol-gasoline blends using Iso-octane additive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1). pp. 151-163. ISSN 2289-7879

Delvi, Hamza Afser and Faheem, Mohammed and Khan, Sher Afghan and Kumar M., Kiran and Kareem Ullah, Mohammad (2019) Effect of ethanol-gasoline blends on performance, combustion and emission characteristics of spark ignition engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 209-220. ISSN 2289-7879

Dewanti, Beauty Suestining Diyah and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris (2022) Conduction heat transfer on the porous media in the gap with heater from below. International Journal of Engineering Materials and Manufacture, 7 (2). pp. 43-53. E-ISSN 0128-1852

Diyana, N. H. and Abdul Muthalif, Asan Gani (2013) Comb-shaped piezoelectric beam configuration for wideband vibration based energy scavenging: Analytical and simulation results. In: 20th International Congress on Sound and Vibration (ICSV20), 7-9 July 2013, Bangkok, Thailand.

Djemana, Mohamed and Benyoucef, Rania and Hrairi, Meftah (2021) Numerical modelling and applied simulation for the vibration monitoring of a ventilation turbine. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), Kuala Lumpur, Malaysia. (Unpublished)

Djemana, Mohamed and Hrairi, Meftah (2015) Damage detection in structures using electromechanical impedance and finite element analysis. Applied Mechanics and Materials, 799-80. pp. 971-975. ISSN 1660-9336

Djemana, Mohamed and Hrairi, Meftah (2016) Modelling and simulation of impedance-based damage monitoring of structures. International Journal of Simulation Modelling, 15 (3). pp. 395-408. E-ISSN 1726-4529

Djemana, Mohamed and Hrairi, Meftah and Al Jeroudi, Yazan (2017) Using electromechanical impedance and extreme learning machine to detect and locate damage in structures. Journal of Nondestructive Evaluation, 36 (2). pp. 1-10. ISSN 0195-9298 E-ISSN 1573-4862

Djemana, Mohamed and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2022) Improving electromechanical impedance damage detection under varying temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). pp. 123-133. ISSN 2289-7879

Djemana, Mohamed and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2021) Numerical Simulation of Electromechanical Impedance-Based Damage Monitoring of Metallic Structures. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), Kuala Lumpur, Malaysia. (Unpublished)

Djemana, Mohamed and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2022) Numerical simulation of electromechanical impedance based crack detection of heated metallic structures. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 94 (2). pp. 77-88. ISSN 2289-7879

Djemana, Mohamed and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2021) Temperature influence on electromechanical impedance method used for damage detection in metallic structure. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), Virtual, Kuala Lumpur, Malaysia. (Unpublished)

Donzomo, Bashir Ahmed and Salami, Momoh Jimoh Emiyoka (2011) Mathematical modeling of counter flow scrubber using Eulerian-Lagrangian approach. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 34-41. ISBN 9789674181734

Donzomo, Bashir Ahmed and Salami, Momoh Jimoh Eyiomika (2011) Intelligent wet scrubber system for industrial air pollution control. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 188-193. ISBN 9789674181734

E

Echrif, Salah B. M. and Hrairi, Meftah (2011) Process simulation and quality evaluation of incremental sheet forming. IIUM Engineering Journal, 12 (3). pp. 185-196. ISSN 1511-788X

Echrif, Salah B. M. and Hrairi, Meftah (2011) Research and progress in incremental sheet forming processes. Materials and Manufacturing Processes, 26. pp. 1404-1414. ISSN 1532-2475 (O), 1042-6914 (P)

Edy Sutjipto, Agus Geter and Triwiyanto, A and Aminanda, Yulfian and Fekry Faris, Waleed and Adesta, Erry Yulian Triblas (2011) Visual inspection on premature failure of electric motor bearings. Applied Mechanics and Materials, 84-85. pp. 557-561. ISSN 1660-9336

Elfaghi, Abdulhafid M. and Asrar, Waqar and Omar, Ashraf Ali E. (2009) Accurate compact flowfield-dependent variation method for compressible Euler equations. In: International Conference on Applications and Design in Mechanical Engineering 2009 (iCADME 2009), 11 - 13 October 2009, Penang, Malaysia.

Elfaghi, Abdulhafid M. and Omar, Ashraf Ali and Asrar, Waqar (2015) Higher-Order Compact-Flow Field-Dependent Variation (HOC-FDV) method for solving two-dimensional navier-stokes equations. International Journal for Computational Methods in Engineering Science and Mechanics, 16 (4). pp. 256-263. ISSN 1550-2287

Elhadie, Mohamed and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2011) Machining cost in conventional and hot machining: comparison and modelling. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-1703-9-5

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf A. and Kwon, Kijung and Jung, Hyejin (2009) Experimental investigation of plain- and flapped-wing tip vortices. Journal of Aircraft, 46 (1). pp. 254-262. ISSN 0021-8669

Embong, Abd Halim and Morshidi, Malik Arman and Yahya, Nur Yana Qaisara and Mokhtar, Nur Syamimi and Shamsuddin, Nurulsaidatul Nadiha and Azhar, Mohamad Asyraaf and Ismail, Abdul Wafi and Wan Zaidi, Wan Zalikha and Zulkefli, Muhammad Syahmi and Shahru Hasimin, Nurnatasyah Azira and Abidin, Adli Musthaqeem and Zulkifli, Muhammad Luqmanul Hakim and Jayady, Siti Hajar and Abd Rahim, Siti Nurul Huda (2020) IIUM Roboteam from International Islamic University Malaysia. In: Robot design Handbook: ROBOCON Malaysia 2019. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 82-91. ISBN 9789674910549

Eshteyah, Mohanna and Hijazi, Ala and Hrairi, Meftah and UNSPECIFIED (2015) Nondestructive evaluation of welded joints using digital image correlation. Journal of Nondestructive Evaluation, 34 (4). pp. 1-12. ISSN 0195-9298

F

Farag, Mohannad and Zainul Azlan, Norsinnira and Alsibai, Mohammed Hayyan (2018) Development of anthropomorphic robotic hand driven by Pneumatic Artificial muscles for robotic applications. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1 - 2 March 2018, Universiti Malaysia Pahang (UMP) Pekan Campus LibraryPekan, Pahang; Malaysia.

Farag, Mohannad and Zainul Azlan, Norsinnira and Alsibai, Mohammed Hayyan and Abd Ghafar, Abdul Nasir (2019) Slippage detection for grasping force control of robotic hand using force sensing resistors. In: 5th International Conference on Computer and Technology Applications, ICCTA 2019, 16th-17th April 2019, Istanbul, Turkey.

Farag, Mohannad and Zainul Azlan, Norsinnira (2015) Adaptive backstepping position control of pneumatic anthropomorphic robotic hand. Procedia Computer Science, 76. pp. 161-167. ISSN 1877-0509

Faris, Waleed Fekry (2012) Contact-impact problems using a quasi-linear finite element appraoch. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 17-21. ISSN 1991-8178

Faris, Waleed Fekry (2012) Contact-impact problems using a quasi-linear finite element approach. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 17-21. ISSN 1991-8178

Faris, Waleed Fekry (2011) Introduction to machine element design for engineers. IIUM Press, Kuala Lumpur. ISBN 9789675272936

Faris, Waleed Fekry and Abdel-Rahman, Eihab M. and Nayfeh, Ali H. (2002) Mechanical behavior of an electrostatically actuated micropump. In: 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 22nd-25th April 2002, Denver, Colorado.

Faris, Waleed Fekry and Asrar, Waqar and Omerbegovic, Adna (2012) Micropump modeling: current status and challenges. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 134-142. ISSN 1991-8178

Faris, Waleed Fekry and Ata, A.A and Sa'Adeh, M.Y (2009) Energy minimization approach for a two-link flexible manipulator. Journal of Vibration and Control, 15 (4). pp. 497-526. ISSN 1077-5463

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Analysis of semi-active suspension systems for four-axles off-road vehicle using half model. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 91-115. ISSN 1479-1471 E-ISSN 1479-148X

Faris, Waleed Fekry and Daoud, Jamal Ibrahim and Sutjipto, Agus Geter Edy (2011) Random vibrations of a beam on elastic foundation. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 456-460. ISSN 1991-8178

Faris, Waleed Fekry and Elmoselhy, Salah (2017) The true inventor of some early mechanical engineering devices and mechanisms. Al-Shajarah, 22 (1). pp. 29-64. ISSN 1394-6870

Faris, Waleed Fekry and Ihsan, Sany Izan (2009) A first course in control systems. IIUM Press, Kuala Lumpur. ISBN 9789833855650

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-1471 E-ISSN 1479-148X

Faris, Waleed Fekry and Mohammed, Hazem (2004) A comparison between two solution approaches for diaphragm-based capacitive pressure microsensor. In: 2004 IEEE International Conference on Semiconductor Electronics, 7-9 December 2004, Kuala Lumpur.

Fauzi, Fatin Bazilah and Ismail, Edhuan and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop and Md Din, Muhammad Faiz and Mohd Abid, Mohd Asyadi Azam (2018) A critical review of the effects of fluid dynamics on graphene growth in atmospheric pressure chemical vapor deposition. Journal of Materials Research, 33 (9). pp. 1088-1108. ISSN 0884-2914 E-ISSN 2044-5326

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Muhammad, Hasibul hasan and Shanta, Mst. Nafisa Tamanna (2015) Experimental investigation on Magnetorheological Damper’s characterization. Advanced Materials Research, 1115. pp. 476-479. ISSN 1022-6680

Fürst, Jiri and Islam, Mazharul and Príhoda, Jaromír and Wood, David H. (2015) Modifications to the k-kL-ω transition model based on Pohlhausen and Falkner-Skan profiles. In: North American Wind Energy Academy (NAWEA) 2015 Symposium, 9th-11th June 2015, Virginia, USA.

G

Ganat, Tarek A. and Hrairi, Meftah (2019) Effect of flow patterns on two-phase flow rate in vertical pipes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 150-160. ISSN 2289-7879

Ganat, Tarek A. and Hrairi, Meftah (2018) Gas–liquid two-phase upward flow through a vertical pipe: influence of pressure drop on the measurement of fluid flow rate. Energies, 11 (11). pp. 1-23. ISSN 1996-1073

Ganat, Tarek A. and Hrairi, Meftah (2018) A new choke correlation to predict flow rate of artificially flowing wells. Journal of Petroleum Science and Engineering, 171. pp. 1378-1389. ISSN 0920-4105

Ganat, Tarek A. and Hrairi, Meftah and Belladonna, Maulianda and Eghbal, Motaei (2019) Analytical model for predicting frictional pressure drop in upward vertical two-phase flowing wells. Heat and Mass Transfer, 55 (8). pp. 2137-2151. ISSN 0947-7411 E-ISSN 1432-1181

Ganat, Tarek A. and Hrairi, Meftah and Hawlader, Mohammad Nurul Alam and Osman, Farj (2015) Development of a novel method to estimate fluid flow rate in oil wells using electrical submersible pump. Journal of Petroleum Science and Engineering, 135. pp. 466-475. ISSN 0920-4105

Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im (2017) In-the-loop emotion recognition system for Human Machine Interaction (HMI). IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-473-5

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2010) Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining. LAP Lambert Academic Publishing, Germany. ISBN 978-3-8383-7307-2

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Ishtiyaq, M. H. (2011) Comparison of surface roughness in end milling of titanium alloy Ti-6Al-4V using uncoated WC-Co and PCD inserts through generation of models. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 189-194. ISBN 9789674181758

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2009) Improved tool life in end milling Ti-6A1-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

Gunawan, Teddy Surya and Khalifa, Othman Omran and Shafie, Amir Akramin and Ambikairajah, E. (2011) Speech coding using compressive sensing on a multicore system. In: Mechatronics Book Series: System design and signal processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 194-201. ISBN 9789674181321

H

Hablee, Sufiamie and Samsudin, Nurhusna and Sopyan, Lis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md. Mujibur and Ahmad Raus, Raha (2019) Calcium phosphate /poly (ethylene glycol) bone cement: cell culture performance. International Journal of Recent Technology and Engineering, 7 (6). pp. 82-86. ISSN 2277-3878

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Mujibur (2018) Effect of poly(ethylene glycol) on the injectability, setting behavior and mechanical properties of calcium phosphate bone cement. IIUM Engineering Journal, 19 (2). pp. 192-202. ISSN 1511-788X E-ISSN 2289-7860

Hafiz, A. K. M. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI H13 tool steel. In: International Conference on Industrial Engineering and Engineering Management, 2 - 5 December 2007, Singapore.

Haiza, Haroon and Yaacob, Iskandar Idris and Ahmad Azhar, Ahmad Zahirani (2018) Thermal conductivity of water based magnetite ferrofluids at different temperature for heat transfer applications. In: International Conference on Sustainable Materials, ICoSM 2018, 16th Apr. 2018, Bangkok, Thailand.

Haja Mohideen, Ahmad Jazlan and Houlis, Pantazis and Sreeram, Victor and Togneri, Roberto (2017) An improved parameterized controller reduction technique via new frequency weighted model reduction formulation. Asian Journal of Control, 19 (6). pp. 1920-1930. ISSN 1561-8625 E-ISSN 1934-6093

Haja Mohideen, Ahmad Jazlan and Sreeram, Victor and Shaker, Hamid Reza and Togneri, Roberto and Minh, Ha Binh (2016) Frequency interval cross gramians for linear and bilinear systems. Asian Journal of Control, 19 (1). pp. 22-34. ISSN 1561-8625 E-ISSN 1934-6093

Haja Mohideen, Ahmad Jazlan and Sreeram, Victor and Togneri, Roberto (2015) Cross gramian based time interval model reduction. In: 5th Australian Control Conference, AUCC 2015, 5-6 November 2015, Australia.

Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2011) Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May 2011, Kuala Lumpur. (Unpublished)

Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2013) Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 174-180. ISSN 1755-9766

Hameed, Ammar and Kafafy, Raed and Idres, Moumen (2012) One-dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-based thermoelectrically controlled micronozzle. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 163-168. ISSN 1755-9766

Hameed, Shihab A. and Chek Noh, Noor Hafiza and Salim, NurHuda and M. Sharifudeen, Shahina Shabnam (2010) A novel mobile web application for an integrated medical and emergency model. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Hamizi, Ilya Bashiera and Khan, Sher Afghan (2019) Aerodynamics investigation of delta wing at low Reynold’s number. CFD letters, 11 (2). pp. 32-41. ISSN 2180-1363

Hamza, Mohammad Ameer and Jameel, Ahmad Tariq and Asrar, Waqar (2019) A comparative study of two different numerical schemes for the simulation of nonlinear dynamics of heated falling thin films. International Journal of Recent Technology and Engineering, 7 (6). pp. 100-105. ISSN 2277-3878

Hanash, Ebrahim and Ali, Mohammad Yeakub (2018) Experimental study of electrical discharge drilling of stainless steel UNS S30400. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Hanash, Ebrahim and Karim, A.N. Mustafizul and Tuan, SaravananTanjong and Mohiuddin, A. K. M. (2017) Throughput enhancement of car exhaust fabrication line by applying MOST. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Jailani, Mohd Noor (2015) Dynamic characterisation of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3-4). pp. 199-209. ISSN 1479-1471 E-ISSN 1479-148X

Hanouf, Zahir and Faris, Waleed Fekry and Nor, Mohd Jailani Mohd (2014) Dynamic characterization of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471. pp. 89-96. ISSN 1662-7482

Haque, Md. Mohafizul and Ismail, Ahmad Faris (2010) Engineering materials and manufacturing processes from Qur'anic perspective. Advanced Materials Research, 83-86. pp. 834-841. ISSN 1662-8985

Haque, Md. Mohafizul and Khan, Ahsan Ali and Ismail, Ahmad Faris (2009) Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy. International Journal of Modern Physics B, 23 (6-7). pp. 826-831. ISSN 0217-9792 E-ISSN 1793-6578

Hasbullah, Faried and Faris, Waleed Fekry (2018) Simulation of disturbance rejection control of half-car active suspension system using ADRC with decoupling transformation. In: 4th International Conference on Mathematical Applications in Engineering (ICMAE ’17), 8th-9th Aug. 2017, Kuala Lumpur.

Hasbullah, Faried and Faris, Waleed Fekry and Darsivan, Fadly Jashi and Abdelrahman, Mohammad (2019) Ride comfort performance of a non-linear full-car using active suspension system with active disturbance rejection control and input decoupling transformation. International Journal of Heavy Vehicle Systems, 26 (2). pp. 188-224. ISSN 1744-232X E-ISSN 1741-5152 (In Press)

Hasim, Fadilah and Rusyadi, Rusman and Indra Surya, Wijaya and ., Fariduzzaman and Asrar, Waqar and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Kafafy, Raed (2008) Flow field characteristics of the IIUM low speed wind tunnel. In: 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics, 7-10 Dec. 2008, Taiwan. (Unpublished)

Hasim, Fadilah and Rusyadi, Rusman and Surya, Wijaya Indra and , Fariduzzaman and Asrar, Waqar and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Kafafy, Raed (2008) The IIUM low speed wind tunnel. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, 18-19 December 2008, Kuching Serawak. (Unpublished)

Hassan, Hamdan and Wahid, Azni Nabela and Abdul Muthalif, Asan Gani (2022) Tunable piezoelectric generator coupled with Shape Memory Alloy (SMA) heat engine as thermal energy harvester. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 9th - 10th August 2022, Online Conference, Kuala Lumpur, Malaysia.

Hawlader, Mohammad Nurul Alam and Baradey, Y. and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Drying of fruits and vegetables: The impact of different drying methods on product quality. In: Advances in Heat Pump-Assisted Drying Technology. Advances in Drying Science & Technology . CRC Press, Boca Raton, Florida, pp. 189-215. ISBN 978-1-4987-3499-8

Hawlader, Mohammad Nurul Alam and Lee, Poh Seng and Chua, Kok Kiang (2011) Performance of different photovoltaic cells operating under the meteorological conditions of Singapore. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 229-239. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Rahman, S. M. A. and Jahangeer, K. A. (2011) Optimization and economic analysis of a solar assisted heat pump drying system. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 103-116. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Ullah, M. Zakir (2011) A solar heat pump water heater for rural hospitals. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 117-125. ISBN 9789674181581

Hazali, Norazlanshah and Ismail, Aziah (2012) Design and Performance of 20 Watts Portable Solar Generator. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 1-6. ISSN 1757-8981

Hedi, Chtourou and Meftah, Hrairi (2011) Predicting density distribution in Green compacts using finite element simulations. Australian Journal of Basic and Applied Sciences, 5 (3). pp. 60-68. ISSN 1991-8178

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar (2015) The study on performance of naturally aspirated spark ignition engine equipped with waste heat recovery mechanism. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10058-10065. ISSN 1819-6608

Herawan, Safarudin Gazali and Talib, Kamarulhelmy and Putra, Azma and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Musthafah, Mohd Tahir (2018) Prediction of generated power from steam turbine waste heat recovery mechanism system on naturally aspirated spark ignition engine using artificial neural network. Soft Computing, 22 (18). pp. 5955-5964. ISSN 1432-7643 E-ISSN 1433-7479

Hilmy, Irfan and Adesta, Erry Yulian Triblas (2014) Welding performance of a homemade friction stir welding tool. Applied Mechanics and Materials, 446-47. pp. 660-664. ISSN 1660-9336

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Riza, Muhammad (2014) Heat generation performance of a homemade friction stir welding tool. Applied Mechanics and Materials, 529 (2014). pp. 200-205. ISSN 1022-6680

Hilmy, Irfan and Wahab, M. Abdel and Adesta, Erry Yulian Triblas and Mohamed Ariff, Tasnim Firdaus (2015) Damage detection based on the natural frequency shifting of a clamped rectangular plate model. Journal of Physics: Conference Series, 628. 012034-1. ISSN 1742-6588 (P), 1742-6596 (O)

Hoda, Asif (2011) Direct numerical simulation (DNS) and large eddy simulation (LES). In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 177-181. ISBN 978-967-418-216-8

Hoda, Asif (2011) Film cooling of turbine blades. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 192-196. ISBN 978-967-418-216-8

Hoda, Asif (2011) Numerical simulation of complex turbulent flows. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 172-176. ISBN 978-967-418-216-8

Hoda, Asif (2011) Reynolds averaged navier stokes (RANS) simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 182-191. ISBN 978-967-418-216-8

Hoq, S. M. Afzal and Okhunov, Abdurahim and C. P. Tso, Tso (2020) Error estimation of bilinear Galerkin finite element method for 2D thermal problems. 3C Tecnología. Glosas de innovación aplicadas a la pyme, 9 (1). pp. 79-93. ISSN 2254 – 4143

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) An analytical approximation technique for the duffing oscillator based on the energy balance method. Italian Journal of Pure and Applied Mathematics, 37. pp. 455-466. ISSN 1126-8042

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.

Hossain, A.K.M. Zakir and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. (2017) Analog front-end: UWB chipless RFID system. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 9789674184933

Hossain, Altab and Rahman, Mohammed Ataur and Hossen, Jakir and Iqbal, A.K.M. Asif (2011) Application of fuzzy logic approach for an aircraft model with and without winglet. International Journal of Aerospace and Mechanical Engineering, 5 (4). pp. 224-232. ISSN 2010-3794 (O), 2010-3786 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Iqbal, A.K.M. Parvez and Ariffin, Muhidin and M., Mazian (2012) Drag analysis of an aircraft wing model and without bird feather like winglet. International Journal of Aerospace and Mechanical Engineering, 6 (1). pp. 8-13. ISSN 2010-3794 (O), 2010-3786 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Cushion pressure control system for an intelligent air-cushion track vehicle. Journal of Mechanical Science and Technology, 25 (4). pp. 1035-1041. ISSN 1976-3824 (O), 1738-494X (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle. International Journal of Automotive Technology, 12 (5). pp. 745-753. ISSN 1229-9138 (Print), 1976-3832 (Online)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. World Academy of Science, Engineering and Technology, 75. pp. 50-57. ISSN 2010-376X

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Power consumption prediction for an intelligent air-cushion tracked vehicle: fuzzy expert system. Journal of Energy and Power Engineering, 4 (5). pp. 10-17. ISSN 1934-8975

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Iqbal, Parvez and Muhidin, Arifin and Mohamad, Mazian (2009) Fuzzy logic approach for prediction the lift coefficient on an aircraft model with and without winglet. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladesh.

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Development of an artificial neural network algorithm for predicting the cutting force in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 143-148. ISBN 9789674181758

Hossain, Mohammad Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2008) Comparison of uncoated and coated carbide inserts in end milling of Ti–6Al–4V in terms of surface roughness. International Journal of Materials Processing Technology. (In Press)

Hossain, Mohammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Anayet Ullah (2008) Development of an artificial neural network algorithm for predicting the surface roughness in end milling of inconel 718 alloy. In: International Conference on Computer and Communication Engineering 2008, 13-15 May 2008, Kuala Lumpur.

Hossain, Mohammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Artificial neural network algorithm for predicting the surface roughness in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM university press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 149-154. ISBN 9789674181758

Hossain, Muhammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Karim, A. (2008) Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 320-326. ISSN 1734-8412

Hrairi, Meftah (2017) 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016. In: "3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016", 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur; Malaysia.

Hrairi, Meftah (2015) Development of Electro-Mechanical Impedance-Based Damage Detection Technique for Structural Health Monitoring. Research Report. [s.n]. (Unpublished)

Hrairi, Meftah (2011) General framework for inverse identification of consecutive parameters. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 177-182. ISBN 9789674181741

Hrairi, Meftah (2011) Inverse parameter identification of elastic and inelastic constitutive material models. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 183-188. ISBN 9789674181741

Hrairi, Meftah (2019) Investigation of piezoelectric actuation effect on fracture toughness of isotropic materials. Research Report. UNSPECIFIED. (Unpublished)

Hrairi, Meftah (2009) Statistical Signal Processing and Sorting for Acoustic Emission Monitoring of High-Temperature Pressure Components. Experimental Techniques, 33 (5). pp. 35-43. ISSN 1747-1567

Hrairi, Meftah (2009) Using acoustic emission and fractography to evaluate defects induced by corrosive environment. Corrosion Engineering, Science and Technology, 44 (4). pp. 251-260. ISSN 1743-2782 (O), 1478-422X (P)

Hrairi, Meftah and Abu Bakar, Anwar (2010) Development of an adaptive headlamp system. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-13 May 2010, Kuala Lumpur.

Hrairi, Meftah and Ahmed, Mirghani Ishak and Ismail, Ahmad Faris (2010) Mixed-convection heat transfer from simulated air-cooled electronic devices: experimental and numerical study. Journal of Thermophysics and Heat Transfer, 24 (1). pp. 165-172. ISSN 1533-6808 (O), 0887-8722 (P)

Hrairi, Meftah and Baharom, Badrul Hanafi (2011) Design and modeling of silicon MEMS accelerometer. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hrairi, Meftah and Chtourou, Hedi (2010) Predicting density distribution in green compacts using finite element simulations. In: International Conference on Mathematical Applications in Engineering (ICMAE’10), 3 - 4 Aug, 2010, Kuala Lumpur.

Hrairi, Meftah and Chtourou, Hedi and Gakwaya, Augustin and Guillot, Michel (2011) Modeling the powder compaction process using the finite element method and inverse optimization. The International Journal of Advanced Manufacturing Technology, 56 (5-8). pp. 631-647. ISSN 0268-3768

Hrairi, Meftah and Daoud, Jamal Ibrahim and Zakaria, Faiz (2019) Optimization of incremental sheet metal forming process using grey relational analysis. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 246-252. ISSN 2277-3878

Hrairi, Meftah and Echrif, Salah B. M. (2011) Enhancing magnetic particle testing of automotive parts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 189-195. ISBN 9789674181741

Hrairi, Meftah and Echrif, Salah B. M. (2011) Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hrairi, Meftah and Hussin, Asmu' (2011) Numerical simulation of green compacts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 161-166. ISBN 978-967-418-174-1

Hrairi, Meftah and Hussin, Asmu'i and Mohamad Ravi, Fadzly (2011) Overview of the powder metallurgy process. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 151-155. ISBN 9789674181741

Hrairi, Meftah and Jamil, Fatimah (2011) Study of spot welding process. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 172-176. ISBN 9789674181741

Hrairi, Meftah and Mohamad Ravi, Fadzly (2011) Mechanical properties of sintered aluminum alloy compacts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 156-160. ISBN 978-967-418-174-1

Hrairi, Meftah and Nawi, Saiful Mazwan (2011) Experimental studies of dieless forming. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 167-171. ISBN 9789674181741

Hrairi, Meftah and Rizal, Mohd Shah (2009) Development of a system for automatic magnetic particle inspection of automotive components. In: Proceedings of 2nd CUTSE International Conference 2009 CUTSE'09, November, Miri, Malaysia. (Unpublished)

Hrairi, Meftah and Rizal, Mohd Shah and Ahmed, Elsiddig Abdelazim (2010) Towards automatic testing and defect recognition in magnetic particle inspection. In: The 2nd International Conference on Engineering and ICT, 18 - 20 February, 2010, Malacca, Malaysia.

Hrairi, Meftah and Rizal, Mohd Shah and Echrif, Salah B. M. (2011) Development of automatic magnetic particle system for automotive parts inspection. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 160-165. ISBN 978-967-418-216-8

Hrairi, Meftah and Rizal, Mohd Shah and Echrif, Salah B. M. (2011) Performance of an automatic magnetic particle inspection of automotive parts. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 166-171. ISBN 978-967-418-216-8

Hrairi, Meftah and Zuhudi, Nurul Farahana (2010) Ultrasonic techniques for detection of thinning defects in metal plates. In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment, 14 - 16 April, 2010, Kuching, Sarawak.

Hung, W. N. P. and Ngothai, Y. and Yuan, S. and Lee, C. W. and Ali, Mohammad Yeakub (2001) Micromolding of three-dimensional components. In: Precision Engineering at the Beginning of a Millenium (ICPE), 18-20 July 2001, Yokohama, Japan.

Husin, Hafiz and Mat Nawi, Mohd Nazir (2020) Investigation on the effect of abrasive waterjet parameter on machining stainless steel. In: iMEC-APCOMS 2019, 21 August 2019, Putrajaya.

Hussain, Zakia and Zainul Azlan, Norsinnira (2020) 3-D dynamic modeling and validation of human arm for torque determination during eating activity using Kane’s method. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 44 (3). pp. 661-694. ISSN 2228-6187

Hussain, Zakia and Zainul Azlan, Norsinnira (2017) Human lower arm analysis during different eating activities. In: 2017 IEEE 8th Control and System Graduate Research Colloquium (ICSGRC 2017), 4th-5th August 2017, Shah Alam, Malaysia.

Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Experimental results of liquid slosh in a cylindrical tank with different fill levels. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 226-233. ISBN 9789674181741

Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Experimental study of liquid slosh dynamics in a half filled cylindrical tank. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 220-225. ISBN 9789674181741

Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Liquid sloshing. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 215-219. ISBN 9789674181741

Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Numerical and experimental results of liquid slosh in a partially filled cylindrical tank. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 242-245. ISBN 9789674181741

Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Simulation model of 3D liquid slosh in a partially filled cylindrical tank. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 233-237. ISBN 9789674181741

Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Simulation results of liquid slosh in a partially filled cylindrical tank. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 238-241. ISBN 9789674181741

I

Ibrahim, Dauda Sh. and Abdul Muthalif, Asan Gani and Diyana, N. H. and Saleh, Tanveer (2017) Comparative study of conventional and magnetically coupled piezoelectric energy harvester to optimize output voltage and bandwidth. Microsystem Technologies, 23 (7). pp. 2663-2674. ISSN 0946-7076 E-ISSN 1432-1858

Ibren, Mohamed and Andan, Amelda Dianne and Asrar, Waqar and Sulaeman, Erwin (2022) A review on generation and mitigation of airfoil self-induced noise. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (1). pp. 163-178. ISSN 2289-7879

Ibren, Mohamed and Sulaeman, Erwin and Andan, Amelda Dianne and Aminanda, Yulfian and Halim, A. K. A (2020) Gust load alleviation of flexible composite wing. CFD Letters, 12 (4). pp. 79-89. ISSN 2180-1363

Idres, Moumen (2011) Compressor models. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 34-39. ISBN 9789674181451

Idres, Moumen (2011) Introduction to compressors. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 4-8. ISBN 9789674181451

Idres, Moumen (2011) Modeling of compression systems. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 27-33. ISBN 9789674181451

Idres, Moumen (2011) Rotating stall and surge. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 20-26. ISBN 9789674181451

Idres, Moumen (2011) Surge and rotating stall. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 40-47. ISBN 9789674181451

Idres, Moumen (2011) Three-dimensional analysis of compressors. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 15-19. ISBN 9789674181451

Idres, Moumen and Makame, Burhani and Ahmad, Bala Nabil and Naji, Saleh and Safiuddin, Ahmad (2015) Design, fabrication and flight testing of a surveillance UAV. Advanced Materials Research, 1115. pp. 450-453. ISSN 1022-6680

Idres, Moumen and Suliman, Suliman and Kafafy, Raed Ismail and Shaik Dawood, Mohd. Sultan Ibrahim (2014) Orifice plate flowmeter performance under pulsating flow conditions. In: Automotive and Vehicle Technologies Conference (AVTECH) 2013, 2-4 Oct 2013, Yildiz Technical University, Istanbul, Turkey.

Ihsan, Sany Izan and Ahmadian, Mehdi and Faris, Waleed Fekry and Blancard, E. D. (2009) Ride performance analysis of half-car model for semi-active system using RMS as performance criteria. Shock and Vibration, 16. pp. 593-605. ISSN 1070-9622

Ihsan, Sany Izan and Mohamad Safian, Mohamad Ariff Iskandar and Mohd Taufek, Muhammad Aliff and Mohiuddin, A. K. M. (2017) Improvement design of parabolic trough. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th - 27th July 2016, Kuala Lumpur, Malaysia.

Illias, S and Rosman, N A and Abdullah, N S and Shaiful, A I M and Omar, M N B and Ismail, K A and Ani, Mohd Hanafi (2019) Evaporation lifetime and boiling curve on hemispherical stainless steel (304) surface. In: UNSPECIFIED.

Illias, Suhaimi and Hussain, Suhaila and Ishak, Mohamad Shaiful Ashrul and Mustaffa, Mohammad Taufiq and Ismail, Khairul Azwan and Selamat, Salsuwanda and Ani, Mohd Hanafi (2021) Investigation on water droplet receding height impacting onto heated carbon surface. Journal of Mechanical Engineering Research and Developments, 44 (6). pp. 335-341. ISSN 1024-1752

Illias, Suhaimi and Hussain, Suhaila and Rosman, N A and Abdullah, Nadiah Syafiqah and Shaiful, Mohamad Shaiful Ashrul and Omar, Mohd Nazri and Ismail, K A and Ani, Mohd Hanafi (2019) Receding height of water droplet in the film boiling regime. In: 6th International Conference on Applications and Design in Mechanical Engineering, 26 - 27 Aug 2019, Penang Island.

Illias, Suhaimi and Hussain, Suhaila and Rosman, N. A and Baharuddin, M.E and Shaiful, A.I.M. and Ismail, Khairul Azwan and Mohd Hanafi, Ani and UNSPECIFIED (2021) Critical heat flux and Leidenfrost temperature on Electrical Discharge Machining (EDM) - constructed hemispherical surface. Case Studies in Thermal Engineering, 27. pp. 1-8. ISSN 2214-157X

Iqbal, Mohammad and Konneh, Mohamed and Ani, Mohd Hanafi and Abdallah, Kassim Abdulrahman and Binting, Muhammad Faruq (2015) Cutting temperature in high speed milling of silicon carbide using diamond coated tool. International Journal of Mechanical And Production Engineering, 3 (4). pp. 62-66. ISSN 2320-2092 E-ISSN 2321-2071

Isa, Wan Tarmizi and Saharin, Sanisah and Wan Salim, Wan Wardatul Amani (2019) Battery characterization of hybrid car. International Journal of Recent Technology and Engineering, 7 (6). pp. 143-146. ISSN 2277-3878

Ishak, Nor Izzati and Md Yusof, Hazlina and Sidek, Shahrul Naim and Jaalan, Zaleha (2018) Interactive robotic platform for education and language skill rehabilitation. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Ishak, Nor Izzati and Md Yusof, Hazlina and Sidek, Shahrul Na'im and Rusli, Nazreen (2019) Robot selection in robotic intervention for ASD children. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences )IECBES 2018), 3rd-6th December 2018, Kuching, Sarawak.

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end milling of Inconel 718 using coated WC-Co inserts. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 123-131. ISBN 9789674181758

Islam, M. Serajul and Monde, M. and Hino, R. and Huq, A.M.A. and Mohiuddin, A. K. M. (1997) Heat transfer augmentation in Rib-Roughened Narrow channels with one-sided heating. In: Second International Seminar on Fluid Mechanics and Heat Transfer, December 17-18, 1997, Dhaka, Bangladesh.

Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Mansor, Hasmah (2018) Trajectory tracking of quaternion based quadrotor using model predictive control. International Journal of Engineering and Technology (UAE), 7 (4.13). pp. 125-128. ISSN 2227-524X

Islam, Mazharul (2014) Design of Darrieus-type wind turbines. In: Small-scale wind power: design, analysis, and environmental impacts. Momentum Press, New York, USA, pp. 45-63. ISBN 9781606504840 / 978-1-60650-485-7

Islam, Mazharul and Amin, M. Ruhul and Carriveau, Rupp and Fartaj, Amir (2008) Designing straight-bladed vertical axis wind turbine using the cascade theory. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10th-12th September 2008, Victoria, British Columbia, Canada.

Islam, Mazharul and Amin, M. Ruhul and Islam, A.K.M. Sadrul (2006) Renewable energy powered rural community development centres in the developing countries. In: The 2006 ASME Power Conference, 28th-30th March 2006, Atlanta, GA, USA.

Islam, Mazharul and Amin, M. Ruhul and Shariff, Yasir M. (2009) Computational Analysis of a High-Lift and Low Reynolds Number Airfoil at Turbulent Atmospheric Conditions. In: ASME 2009 International Mechanical Engineering Congress and Exposition, IMECE2009, 13 -19 November 2009, Lake Buena Vista, FL; United States.

Islam, Mazharul and Amin, M. Ruhul and Shariff, Yasir M. (2010) Investigation of smaller-capacity fixed-pitch SB-VAWT for urban rooftops. In: 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2010), Antalya, Turkey.

Islam, Mazharul and Amin, M. Ruhul and Ting, David and Fartaj, Amir (2008) Performance analysis of a smaller-capacity straight-bladed VAWT with prospective airfoils. In: 46th AIAA Aerospace Sciences Meeting and Exhibit, 7th-10th January 2008, Reno, Nevada, U.S.A..

Islam, Mazharul and Amin, M. Ruhul and Ting, David S-K and Fartaj, Amir (2008) Selection of airfoils for straight-bladed vertical axis wind turbines based on desirable aerodynamic characteristics. In: 2008 International Mechanical Engineering Congress and Exposition, 31st Oct.- 6th Nov. 2008, Boston, Massachusetts, USA.

Islam, Mazharul and Amin, M. Ruhul and Ting, David S-K and Fartaj, Amir (2008) A new airfoil for the supporting struts of smaller-capacity straight-Bladed VAWT. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10th-12th Sept. 2008, Victoria, British Columbia, Canada.

Islam, Mazharul and Amin, Mohammad Ruhul and Carriveau, Rupp and Fartaj, Amir (2009) Investigation of low reynolds number airfoils for fixed-pitch straight-bladed VAWT. In: 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 5-8 January 2009, Orlando, Florida, U.S.A..

Islam, Mazharul and Amin, Muhammad Ruhul and Ani, Farid Nasir (2014) Evaluation of the prospects of using solar thermal air-conditioning systems in Saudi Arabia. Applied Mechanics and Materials, 554. pp. 271-275. ISSN 1662-7482

Islam, Mazharul and Carriveau, Rupp and Fartaj, Amir (2012) Performance analyses of a fixed-pitch straight-bladed VAWT with selected low Reynolds number airfoils. International Journal of Environmental Studies, 69 (2). pp. 289-298. ISSN 0020-7233 E-ISSN 1029-0400

Islam, Mazharul and Fartaj, Amir and Carriveau, Rupp (2008) Analysis of the design parameters related to a fixed-pitch straight-bladed vertical axis wind turbine. Wind Engineering, 32 (5). pp. 491-507. ISSN 0309-524X E-ISSN 2048-402X

Islam, Mazharul and Fartaj, Amir and Carriveau, Rupp (2011) Design analysis of a smaller-capacity straight-bladed VAWT with an asymmetric airfoil. International Journal of Sustainable Energy, 30 (3). pp. 179-192. ISSN 1478-6451 E-ISSN 1478-646X

Islam, Mazharul and Fürst, Jiri and Wood, David (2017) CFD analysis of SD 7003 airfoil at low reynolds number with a laminar kinetic energy based transition model. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3112-3117. ISSN 1819-6608

Islam, Mazharul and Islam, A.K.M. Sadrul and Amin, M. Ruhul (2005) Small-scale decentralized renewable energy systems for the remote communities of the developing countries. In: The ASME Power Conference, 5-7 April 2005, Chicago, Illinois, USA. (Unpublished)

Islam, Mazharul and Mandal, A.C. (2000) Performance characteristics of VAWT with blade pitching including the dynamic stall and flow curvature effects. Journal of Mechanical Engineering, 28 (1&2). pp. 31-43. ISSN 0379-4318

Islam, Mazharul and Mandal, A.C. (1999) A comparative study of design between overhang and simple supported straight-bladed vertical axis wind turbine. Journal of Energy and Environment, 1 (1). pp. 37-40. ISSN 1563-1362

Islam, Mazharul and Ting, David and Fartaj, Amir (2008) Aerodynamic models for Darrieus-type straight-bladed vertical axis wind turbines. Renewable and Sustainable Energy Reviews, 12 (4). pp. 1087-1109. ISSN 1364-0321

Islam, Mazharul and Ting, David S-K and Fartaj, Amir (2007) Design of a special-purpose airfoil for smaller-capacity straight-bladed VAWT. Wind Engineering, 31 (6). pp. 401-424. ISSN 0309-524X E-ISSN 2048-402X

Islam, Mazharul and Ting, David S-K. and Fartaj, Amir (2007) Desirable airfoil features for smaller-capacity straight-bladed VAWT. Wind Engineering, 31 (3). pp. 165-196. ISSN 0309-524X E-ISSN 2048-402X

Islam, Mazharul and Ting, David S‐K. and Fartaj, Amir (2007) Assessment of the small‐capacity straight‐bladed VAWT for sustainable development of Canada. International Journal of Environmental Studies, 64 (4). pp. 489-500. ISSN 0020-7233 E-ISSN 1029-0400

Islam, Md. Rafiqul and Al-Khateeb, Khalid A. Saeed and Dao, Hassan (2010) Climatic data acquisition system for satellite communications. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Ismail, Ahmad Faris and Abd-Halim, B.A. and Walvekar , Rashmi Gangasa and Yusaf, Talal F. (2014) Smaller radiator with enhanced heat transfer using CNT-nanofluids. WIT Transactions on Engineering Sciences, 88. pp. 185-191. ISSN 1743-3533

Ismail, Ahmad Faris and Ahmed, Mirghani Ishak and Abakrb, Yousif A. (2011) CFD analysis of an evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 156-162. ISBN 9789674181581

Ismail, Ahmad Faris and Ahmed, Mirghani Ishak and Abakrb, Yousif A. (2002) Experimental and numerical analysis of electronics heat sink. IIUM Engineering Journal, 3 (2). pp. 17-32. ISSN 1511-788X

Ismail, Ahmad Faris and Anuar, Asnida and Walvekar , Rashmi Gangasa and Yusaf, Talal F. (2014) Corrosion effects of CNT-nanofluids on different metals. WIT Transactions on Engineering Sciences, 87. pp. 139-146. ISSN 1743-3533

Ismail, Ahmad Faris and Yusaf, Talal F. and Mahdi, Faisal M.A. and Shamsuddin, Abdul Halim (1997) Combustion processes of rice husks for energy. RERIC International Energy Journal, 19 (2). pp. 63-75. ISSN 1513-718X

Ismail, Roslina and Yaacob, Iskandar Idris (2010) Synthesis of Ni3Al/ZrO2 nanocomposite and study on its high temperature oxidation in mixed gas environment. Materials Science Forum, 654-6. pp. 2739-2742. ISSN 0255-5476

Ismail, Roslina and Yaacob, Iskandar Idris (2010) Synthesis of intermetallic Ni3Al Alloy: properties and high temperature oxidation behavior. Advanced Materials Research, 97-101. pp. 386-389. ISSN 1022-6680

Issoufa, Youssouf Hamidou and Az Eddine, Messikh and Wahiddin, Mohamed Ridza and Umarov, Bakhram A. and Gharib, Subhi Mahmoud Ahmed (2013) Generalized quantum rotation gates using STIRAP. In: The 4th International Conference on Information & Communication Technology for the Muslim World (ICT4M), 25-27 Mar 2013, Rabat, Moroco.

J

Jalel, chebil (2009) Wavelet decomposition for the detection and diagnosis of faults in rolling element bearings. Jordan Journal of Mechanical and Industrial Engineering, 3 (4). pp. 260-267. ISSN 1995-6665

Jamal, Nur Ayuni and Anuar, Hazleen and Ahmad, Zuraida and Abd Razak, Shamsul Bahri (2010) Hazardless nanocomposite for gas barrier potential. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Jameel, Ahmad Tariq and Hamza, Mohammad Ameer and Asrar, Waqar (2018) Nonlinear dynamics of heated falling films under the influence of long-range Van Der Walls intermolecular force interactions. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Jameel, Ahmed Tariq and Hamza, Mohammad Ameer and Hoda, Asif and Rahman, Tariq M. and Asrar, Waqar (2017) Instabilities in non-isothermal falling thin film flows. In: 4th International Conference of Mathematical Applications in Engineering 2017 (ICMAE 2017), 08-09 August 2017, Kuala Lumpur, Malaysia.

Jamshaid, Muhammad and Masjuki, Haji Hassan and Kalam, Md Abul and Zulkifli, Nurin Wahidah Mohd and Arslan, Ahmed and Qureshi, Akbar Ali (2021) Experimental investigation of performance, emissions and tribological characteristics of B20 blend from cottonseed and palm oil biodiesels. Energy, 239. pp. 1-15. ISSN 0360-5442 E-ISSN 1873-6785

Jarin, Sams and Khatun, Mst Khaleda and Shafie, Amir Akramin (2016) Multi-objective constrained algorithm (MCA) and non-dominated sorting genetic algorithm (NSGA-ii) for solving multi-objective crop planning problem. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4079-4086. ISSN 1819-6608

Jasni, Farahiyah and Hamzaid, Nur Azah and Asan Gani, Abdul Muthalif and zakaria, Zafirah and Shasmin, Hanie Nadia and Cheok, Ng Siew (2016) In-socket sensory system for transfemoral amputees using piezoelectric sensors: An efficacy study. IEEE/ASME Transactions on Mechatronics, 21 (5). pp. 2466-2467. ISSN 1083-4435 E-ISSN 1941-014X

Javeed, Abdulhakeem and Kafafy, Raed and Idres, Moumen and Ihsan, Sany Izan (2013) Frequency estimation of flow induced vibration in thin cantilever plate. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Jubran, B. and Ahmed, Mirghani Ishak and Ismail, Ahmad Faris and Abakar, Y.A (2000) Numerical modelling of a multi-stage solar still. Energy Conversion and Management, 41 (11). pp. 1107-1121. ISSN 0196-8904

Jubran, B.A. and Ismail, Ahmad Faris and Pervez, T. and UNSPECIFIED (2000) Prediction of the performance of a solar water detoxification system under Malaysian climatic conditions. Energy Conversion and Management, 41 (1). pp. 1-12. ISSN 0196-8904

K

Kafafy, Raed and Azami, Muhammad Hanafi and Idres, Moumen (2013) Hybrid rocket performance with varying additive concentrations. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 14 - 17, 2013, San Jose, CA . (Unpublished)

Kafafy, Raed and Azami, Muhammad Hanafi and Idres, Moumen and Zaharim, Azami and Sopian, Kamaruzaman (2012) Development of generic algorithm in wheel-typed hybrid rocket grain design for performance estimation. In: Advances in Environment, Computational Chemistry and Bioscience, 29-31 Dec 2012, Montreux, Switzerland .

Kafafy, Raed and Hameed, Ammar (2011) Modeling of non-uniform thermoelement devices subject to lateral heat convection. Defect and Diffusion Forum, 312. pp. 782-787. ISSN 1012-0386

Kafafy, Raed and Idres, Moumen and Aldheeb, M. and Omar, H. (2011) On the scaling of air launch vehicles. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Kafafy, Raed and Javeed, Abdulhakeem and Ihsan, Sany Izan and Idres, Moumen (2013) Experimental investigation of the performance of flutter-based microgenerators. In: 11TH INTERNATIONAL ENERGY CONVERSION ENGINEERING CONFERENCE, July 14 - 17, 2013, San Jose, CA, USA.

Kafafy, Raed Ismail and Azami, Hanafi and Idres, Moumen (2013) Effectiveness of wheel-typed grain design for hybrid rocket motor performance. In: Recent Advances in Energy, Environment and Development Conference, 30 Jan-01 Feb 2013, Cambridge, MA.

Kafafy, Raed Ismail and Azami, Muhammad Hanafi and Idres, Moumen (2014) Effect of varying design options on the transient behavior of a hybrid rocket motor. Journal of Aerospace Technology and Management, 6 (1). pp. 69-82. ISSN 1984-964 E-ISSN 2175-9146

Kamaruddin, Norhaslinda and Abdul Rahman, Abdul Wahab and Mohamad Halim, Khairul Ikhwan and Mohd Noh, Muhammad Hafiq Iqma (2017) Driver behavior state recognition based on silence removal speech. In: 1st International Conference on Informatics and Computing, ICIC 2016, 28-29 October, 2016, Mataram; Indonesi.

Kamel, Mohammed and Idres, Moumen and Owis, Farouk and Hashem, Ali (2013) Towards a numerical simulation of supersonic mixing & combustion. LAP Lambert Academic Publishing, Saarbrucken. ISBN 9783659387043

Kamel, Mohammed and Owis, Farouk and Idres, Moumen and Hashem, Aly (2015) Numerical simulation and validation of high-speed turbulent and chemically-reacting flows. International Journal of Engineering Systems Modelling and Simulation, 7 (2). pp. 111-124. ISSN 1755-9766

Kamel, Mohammed and Owis, Farouk and Idres, Moumen and Hashem, Aly (2015) Numerical simulation of supersonic and turbulent combustion with trans-verse sonic fuel injection. International Journal of Engineering Systems Modelling and Simulation, 7 (2). pp. 35-61. ISSN 1755-9766

Karim, A.N. Mustafizul and Tuan, Saravanan Tanjong and Emrul Kays, H.M. (2016) Assembly line productivity improvement as re-engineered by MOST. International Journal of Productivity and Performance Management, 65 (7). pp. 977-994. ISSN 1741-0401

Kashtwari, Uzair and Zainul Azlan, Norsinnira and Shahdad, Ifrah (2020) Wearable upper limb motion assist robot for eating activity. Applied Research and Smart Technology, 1 (1). pp. 1-10. ISSN 2722-9637 E-ISSN 2722-9645

Kausalyah, Venkatason and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain (2014) Development of economical vehicle model for pedestrian-friendly front-end profile study. International Journal of Simulation Modelling, 13 (4). pp. 419-432. ISSN 1726-4529

Kausalyah, Venkatason and Shasthri, Sivaguru and Abdullah, Kassim Abdulrahman and Mahmoud Idres, Moumen Mohammed and Shah, Qasim Hussain (2016) Development and optimization of passenger car front profile using polynomial response surface method. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5161-5166. ISSN 1819-6608

Kays, H. M.Emrul and Karim, A. N.Mustafizul and Che Daud, Mohd Radzi (2020) A responsive multiplicative Holt-Winters approach for enhanced forecasting accuracy. International Journal of Industrial and Systems Engineering, 35 (1). pp. 1-12. ISSN 1748-5037 E-ISSN 1748-5045 (In Press)

Khalifa, Othman Omran and Ahmed, Musse Mohamud and Hawlader, Mohammad Nurul Alam (2019) Photovoltic energy conversion technologies : an overview and modelling. In: Solar energy fundamentals, inverters and systems. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 40-61. ISBN 978-967-418-482-7

Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Khan, Sheroz (2011) Digital hearing aids analysis and implementation. In: Mechatronics book series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 224-232. ISBN 9789674181321

Khalifa, Othman Omran and Kyaw, Kyaw Htike and Lai , Weng Kin and Albagoul, A. (2011) Human posture recognition preprocessing techniques. In: Mechatronics book series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 162-170. ISBN 9789674181321

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2017) Perspectives on sustainability integration in the organization's DNA. Noor Publishing. ISBN 9783330852556

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and UNSPECIFIED (2018) Quality management system and sustainability: a Malaysian perspective. International Journal of Services and Operations Management, 30 (3). pp. 286-317. ISSN 1744-2370 E-ISSN 1744-2389

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) Relationships of lean, green manufacturing and sustainable performance: Assessing the applicability of the proposed model. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Khalili, Amjad and Ismail, Md Yusof and Karim, Ahmad Izwan Mustafizul and Che Daud, Mohd Radzi (2017) A comparative evaluation of contemporary models for lean manufacturing practices. International Journal of Services and Operations Management, 28 (1). pp. 26-45. ISSN 1744-2370 E-ISSN 1744-2389

Khalili, Amjad and Ismail, Md Yusof and Rahman, Mohammad Mustafizur and Che Daud, Mohd Radzi (2017) Examining the impact of lean manufacturing on soft TQM practices and sustainable performance: evidence from Malaysian Industries. In: 7th Annual Conference on Industrial Engineering and Operations Management, IEOM 2017, 11th-13th April 2017, Rabat, Morocco.

Khamis, Siti Salwa and Purwanto, Hadi and Rozhan, Alya Naili and Abd. Rahman, Mohamed and Mohd. Salleh, Hamzah (2019) Characterization of municipal solid waste in Malaysia for energy recovery. IOP Conference Series: Earth and Environmental Science, 264 (1). pp. 1-6. ISSN 1755-1307 E-ISSN 1755-1315

Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Application of silicon carbide in abrasive water jet machining. In: Silicon Carbide. InTech, pp. 431-452. ISBN 9789533079684

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining. International Journal of Mechanical Engineering, 7 (1). pp. 81-90. ISSN 1823-5514

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2009) A study of electrode shape configuration on the performance of die sinking EDM. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 19-23. ISSN 1823-0334

Khan, Ahsan Ali and Mohamad Royani, Nurul Nasuha and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Abdul Latif, Muhammad Alif (2018) Improvement of MRR and surface roughness during electrical discharge machining (EDM) using aluminum oxide powder mixed dielectric fluid. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Muataz Hazza Faizi, Muataz and Mohiuddin, A. K. M. and Abdul Fattah, Nurfatihah and Che Daud, Mohd Radzi (2018) Performance of electrical discharge machining (EDM) with nickel added dielectric fluid. IIUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X E-ISSN 2289-7860

Khan, Imran Moez and Htike@Muhammad Yusof, Zaw Zaw and Khalifa, Othman Omran and Lai , Weng Kin (2011) Path detection implementation using fuzzy classifier. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 171-179. ISBN 9789674181321

Khan, Md. Raisuddin and Ab Majid, Mad Helmi and Sidek, Shahrul Na'im (2012) A snake robot with mixed gaits capability. In: The 4th KKU International Engineering Conference 2012 (KKU-IENC 2012), 10-12 May 2012, Khon Kaen, Thailand.

Khan, Md. Raisuddin and Billah, Masum and Watanabe, Mitsuru (2013) Nonlinear modeling of compliant mechanism. In: The 5th International Nanoelectronics Conference (INEC 2013), 2-4 January 2013, Resorts World Sentosa, Singapore.

Khan, Md. Raisuddin and Kamal, MAS and Billah, Masum (2011) Design and development of an automated café system. In: Mechatronics book series: System design and Signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 187-193. ISBN 9789674181321

Khan, Md. Raisuddin and M, Zuhdi and Billah, Masum (2011) Mechanical design of unmanned underwater vehicle. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 180-186. ISBN 9789674181321

Khan, Qudrat and Akmeliawati, Rini and Phan, Hoang Vu and Park, Hoon Cheol (2016) Linear model identification of beetle-mimicking flapping wing micro-air vehicle in hovering flight. In: 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors (IRIS), Tokyo, Japan.

Khan, Qudrat and Akmeliawati, Rini and khan, Mahmood Ashraf (2018) An integral sliding mode-based robust consensus control protocol design for electro-mechanical systems. Studies in Informatics and Control, 27 (2). pp. 147-154. ISSN 1220-1766 E-ISSN 1841-429X

Khan, Sher Afghan and Siddique, Umair M and Ansari, Emaad and Patil, Rajesh (2020) Numerical investigation of semi-empirical relation representing standard deviation in Nusselt profile due to water jet impingement. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 42-53. ISSN 2289-7879

Khorshidtalab, Aida and Salami, Momoh Jimoh Eyiomika (2011) EEG based robot control. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 148-157. ISBN 9789674181765

Khurshid, Malik and Ahmad, Faiz and Yunus, Nurul Azhani and Nakato, Teruyuki and Mouri, Emiko and Shaik Dawood, Mohd. Sultan Ibrahim and Memon, I (2022) A new method of reinforcing graphene nanoplatelets in glass/epoxy composites. Material Science and Engineering Technology. (In Press)

Kolo, Isa and Idres, Moumen and Kafafy, Raed and Shaik Dawood, Mohd. Sultan Ibrahim (2013) Three-dimensional vibration analysis of fluid-filled pipes. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul (2018) Surface morphology study in high speed milling of soda lime glass. In: 3rd International Conference on the Science and Engineering of Materials (ICoSEM 2017), 24th-25th Oct. 2017, Kuala Lumpur.

Konneh, Mohamed and Izman, S. and Ali, Mohammad Yeakub (2006) An investigation on morphology of hard-brittle silicon surface by diamond grinding. In: International Conference on Manufacturing Science and Technology (ICOMAST 2006), 28-30 August 2006, Melaka, Malaysia.

Kumar, L. Harish and Kazi, S. N. and Masjuki, H. H. and Zubir, M. N. M. (2021) A review of recent advances in green nanofluids and their application in thermal systems. Chemical Engineering Journal, 429. pp. 1-18. ISSN 1385-8947

Kumar, Laveet Harish and Kazi, Salim Newaz and Masjuki, Haji Hassan and Zubir, Mohd Nashrul and Jahan, Afrin and Bhinitha, C. (2021) Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192 (Special Issue (SI)). pp. 1-19. ISSN 1359-4311 E-ISSN 1873-5606

Kumar, S. Senthil and K., Rajan and Vinayagam, Mohanavel and Manickam, Ravichandran and Rajendran, Parvathy and Rashedi, Ahmad and Sharma, Abhishek and Khan, Sher Afghan and Afzal, Asif (2021) Combustion, performance, and emission behaviors of biodiesel fueled diesel engine with the impact of Alumina Nanoparticle as an additive. Sustainability, 13 (12103). pp. 1-20. ISSN 2071-1050

Kyaw, Kyaw Htike and Khalifa, Othman Omran and Lai , Weng Kin (2011) Human posture recognition classification and recognition. In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 157-161. ISBN 9789674181321

L

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Modeling in preheated machining of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 43-48. ISBN 9789674181758

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2008) Preheated machining in end milling of hardened steel AISI D2. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 November 2008, Gold Coast, Australia.

Lajis, M. Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Hafiz, Khaled (2011) Modelling of tool life by response surface methodology in hard milling of AISI D2 tool steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 175-179. ISBN 9789674181758

Lajis, Mohd Amri and Che Daud, Mohd Radzi and Amin, A. K. M. Nurul (2009) The implementation of Taguchi method on EDM process of Tungsten Carbide. European Journal of Scientific Research, 26 (4). pp. 609-617. ISSN 1450-216X , 1450-202X

Larbani, Moussa and Ismail, Ahmad Faris (2011) The invention of the helium-neon gas laser by Ali Javan. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 160-164. ISBN 978-967-418-157-4

Legowo, Ari (2012) Hybrid DE and PEM algorithm for identification of small scale Autonomous helicopter model. Research Report. s.n, Kuala Lumpur. (Unpublished)

Liu, Baomin and Hawlader, Mohammad Nurul Alam (2011) Analyses of motion and drag coefficient of water droplets in a natural draught cooling tower. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 240-251. ISBN 9789674181581

Loh, S. K. and Faris, Waleed Fekry and Hamdi, M. and Chin, W. M. (2011) Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5). pp. 1154-1168. ISSN 1674-7321 E-ISSN 1869-1900

Loh, S.K. and Chin, W. M. and Faris, Waleed Fekry (2009) Fatigue analysis of Package Terminal Air Conditioner motor bracket under dynamic loading. Materials and Design, 30. pp. 3206-3216. ISSN 0261-3069

Loh, S.K. and Faris, Waleed Fekry and Chin, W. M. (2011) Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5). pp. 1154-1168. ISSN 1674-7321 (print), 1869-1900 (online)

M

M I, JAHIRUL and Rashid, Muhammad Mahbubur and R , SAIDUR and H H, MASJUKI (2009) Application of Artificial Neural Networks (ANN) for prediction the performance of a dual fuel internal combustion engine. The Hong Kong Institution of Engineers Transactions, 16 (1). pp. 14-20. ISSN 1023-697X (Print), 2326-3733 (Online)

M Nasir, M Nazreen and Seman, M Adam and Mezeix, Laurent and Aminanda, Yulfian and Rivai, Ahmad and Ali, Karim Mansur (2017) Effect of stacking layup on spring-back deformation of symmetrical flat laminate composites manufactured through autoclave processing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25- 27 JULY 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

M., Norfahana and Ismail, Ahmad Faris and Majid, Z. A. A. (2016) An evaluation of heat loss on top of solar collector with multilayered absorber in solar water heating system. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 281-285. ISSN 1819-6608

M. A., Amir and Khan, Ahsan Ali (2009) A study of abrasive water jet machining process on glass/epoxy composite laminate. Journal of Materials Processing Technology, 209 (20). pp. 6168-6173. ISSN 0924-0136

M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) PCD inserts in end milling of Aluminum Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 253-257. ISBN 9789674181758

M. M, Eshtayeh and Hrairi, Meftah (2016) Recent and future development of the application of finite element analysis in clinching process. International Journal of Advanced Manufacturing Technology, 84 (9). pp. 2589-2608. ISSN 0268-3768 E-ISSN 1433-3015

M. Nasir, M. Nazreen and Mezeix, Laurent and Aminanda, Yulfian and Seman, Adam and Rivai, Ahmad and Ali, Karim Mansur (2016) Spring-back simulation of unidirectional carbon/epoxy L- shaped laminate composites manufactured through autoclave processing. In: Joint conference of 2nd International Manufacturing Engineering Conference ( iMEC 2015) & 3rd Asia-Pacific Conference on Manufacturing Systems (APCOMS 2015), 12th-14th November 2015, Kuala Lumpur, Malaysia.

M. Razali, M. Khusyaie and Abdul Muthalif, Asan Gani and Nordin, N. H.Diyana and Abdul Hamid, Syamsul Bahrin (2017) Improved parameter estimation for MRF models for varying current. Advanced Science Letters, 23 (11). pp. 11002-11006. ISSN 1936-6612 E-ISSN 1936-7317

M. Zulkefli, Adibah and Muthalif, Asan G.A. and Nordin, Diyana Nor Hidayati and Syam, Thaer Mahmoud Ibrahim (2019) Intelligent glove for suppression of resting tremor in parkinson’s disease. In: "43rd International Conference on Vibroengineering, 28 - 30 Nov 2019, Bennett UniversityGreater Noida, India.

Madaki, A. G. and Roslan, R. and Kandasamy, Ramasamy and Chowdhury, Md. Sazzad Hossien (2017) Flow and heat transfer of nanofluid over a stretching sheet with non-linear velocity in the presence of thermal radiation and chemical reaction. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016;, 15-17 November 2016, Putrajaya, Malaysia.

Mahat, Sazali and Yusoff, Siti Hajar and Zaini, Syasya Azra and Midi, Nur Shahida and Mohamad, Sarah Yasmin (2018) Automatic metal waste separator system in Malaysia. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur.

Mahil, M. mahil and Ahmad Shah, Muzzaffar and Faris, Waleed Fekry (2011) Active engine mounting controller design using linear quadratic regulator and proportional integral derivative. International Journal of Automation and Control , 5 (3). pp. 284-297. ISSN (Online): 1740-7524 - (Print): 1740-7516

Mahmood, Iskandar Al-Thani (2011) Piezoelectric tube scanner in atomic force microscope. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 103-110. ISBN 9789674181765

Mahmood, Iskandar Al-Thani (2011) Working principle and operating mode of atomic force microscopy. In: Mechatronic book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 6-12. ISBN 9789674181765

Mahmood, Iskandar Al-Thani and Khan, Md. Raisuddin (2011) Finite element formulation of piezoelectric laminated composite plate. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 247-256. ISBN 9789674181321

Mahmood, Iskandar Al-Thani and Khan, Md. Raisuddin (2011) A review on modeling and shape control of piezoelectric laminated composite plate using finite element method. In: Mechatronics book series: System design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 257-266. ISBN 9789674181321

Mahmoud Idres, Moumen Mohammed and Kafafy, Raed and Faris, Waleed Fekry (2011) Air supply system transient model for proton exchange membrane fuel cell. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia.

Mahmud, Jamaluddin and Ismail, Ahmad Faris and Pervez, Tasneem (2005) Employing a failure criterion with interaction terms to simulate the progressive failure of carbon-epoxy laminates. Journal - The Institution of Engineers, Malaysia, 66 (2). pp. 6-14. ISSN 0126-513X

Maleque, Md. Abdul and ., Arifutzzaman (2011) Reverse engineering of automotive piston. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 86-91. ISBN 9789674181642

Maleque, Md. Abdul and ., Mohd Nizam (2011) Conceptual design of folding bicycle frame with light weight materials. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 81-85. ISBN 9789674181642

Maleque, Md. Abdul and Afdzaluddin, Atiqah (2011) Reverse engineering for automotive fuel tank. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 121-126. ISBN 9789674181642

Maleque, Md. Abdul and Arifutzzaman, A. K. H. A. Ma and Rahman, Md. Mustafizur (2010) Knowledge based expert system application for automative piston material selection. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3 - 4 December 2010, Pekan, Pahang.

Maleque, Md. Abdul and Dyuti, S. and Rahman, Md. Mustafizur (2010) Material selection method in design of automotive brake disc. In: World Congress on Engineering 2010 , 30 June to 2 July 2010, London, United Kingdom.

Maleque, Md. Abdul and Hossain, M. Sayeed and Dyuti, S. (2011) Material properties and design aspects of folding bicycle frame. Advanced Materials Research, 264-. pp. 777-782. ISSN 1022-6680

Maleque, Md. Abdul and Rahman, Md. Mustafizur and Hossain, Sayeed (2011) Conceptual design of aluminium metal matrix composite brake rotor system. Advanced Materials Research, 264. pp. 1648-1653. ISSN 1022-6680

Maleque, Md. Abdul and Rahman, Md. Mustafizur and Hossain, Sayeed (2011) Reverse engineering of motorcycle chain. Advanced Materials Research, 264-26. pp. 1678-1683. ISSN 1022-6680

Maleque, Md. Abdul and Sarker, Dyuti (2010) Materials selection of a bicycle frame using cost per unit property and digital logic methods. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 95-100. ISSN 1823-0334

Marita, Yusrini and Yaacob, Iskandar Idris (2011) Influence of grain size on magnetic properties of electroplated NiFe alloy. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 65-69. ISBN 9789674181642

Marita, Yusrini and Yaacob, Iskandar Idris (2010) Structural characterization of electrodeposited nickel-iron alloy films. Materials Science Forum, 654-6. pp. 2430-2433. ISSN 0255-5476

Marita, Yusrini and Yaacob, Iskandar Idris (2010) Synthesis and characterization of nickel-iron-silicon nitride nanocomposite. Advanced Materials Research, 97-101. pp. 1360-1363. ISSN 1022-6680

Martono, Wahyudi and Ahmad, Wali and Myo, Min Htut (2009) Neural-Tuned PID controller for Point-to-point (PTP) positioning system: model reference approach. In: 5th International Colloquium on Signal Processing and Its Application, 6-8 Mar 2009, Kuala Lumpur.

Marzuki, Wan M.R.W. and Abdul Muthalif, Asan Gani and Nordin, N. H.Diyana (2018) Semi-active torsional vibration isolation utilizing magnetorheological elastomer. Vibrations in Physical Systems, 29. pp. 1-8. ISSN 0860-6897

Masood, Alnajar and Eldin, Muhammad Saad and Omar, Bnhamdoon and Syafiq, Muhammad and Toha @ Tohara, Siti Fauziah and Abu Hanifah, Rabiatuladawiah (2020) Design and modelling of four-legged amphibious robot. Technology Reports of Kansai University, 62 (03). pp. 605-617. ISSN 0453-2198

Mat Noor, Muhamad and Kadirgama, K. and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Pattern recognition method to predict recycling strategy for electronic equipments. Advanced Materials Research, 264-. pp. 949-955. ISSN 1022-6680

Md Lutful Huq, Naim and Khan, Md. Raisuddin and Shafie, Amir Akramin and Billah, Md Masum and Ahmmad, Syed Masrur (2018) Motion investigation of a snake robot with different scale geometry and coefficient of friction. Robotics, 7 (2). pp. 1-11. E-ISSN 2218-6581

Md Nor, Khairul Affendy and Abdul Muthalif, Asan Gani and Wahid, Azni N. (2013) Ant colony optimization for controller and sensor-actuator location in active vibration control. In: International Conference on Modern Trends in Science, Engineering and Technology 2013 (ICMTSET 2013), 25-26 Sept 2013 , Dubai , UAE.

Md Nor, Khairul affendy and Abdul Muthalif, Asan Gani and Walid, Azni N. (2013) ANT colony optimization for controller and sensor-actuator location in active vibration control. Journal of Low Frequency Noise, Vibration and Active Control, 32 (4). pp. 293-308. ISSN 0263-0923

Md Ralib, Aliza Aini and Mortada, Ossama and Orlianges, Jean Christophe and Crunteanu, Aurelian and Chatras, Matthieu and Nordin, Anis Nurashikin (2017) Enhanced piezoelectric properties of aluminium doped zinc oxide thin film for surface acoustic wave resonators on a CMOS platform. Journal of Materials Science: Materials in Electronics, 28 (12). pp. 9132-9138. ISSN 0957-4522 E-ISSN 1573-482X

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2022) Comparison of tool wear mechanisms during drilling of aluminium alloy 7075 in dry and chilled air conditions. Journal of Science and Technology, 14 (1). pp. 67-74. ISSN 2229-8460 E-ISSN 2600-7924

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2021) The effect of chilled air on burr formation when drilling aluminium alloy in manufacturing industry. International Journal of Progressive Sciences and Technologies (IJPSAT), 28 (1). pp. 437-445. ISSN 2509-0119

Mehfuz, R. and Ali, Mohammad Yeakub (2007) Surface roughness analysis of beryllium-copper alloy in micro end milling. In: International Conference on Mechanical Engineering (ICME 2007), 29-31 December 2007, Dhaka, Bangladesh.

Mehfuz, Reyad and Ali, Mohammad Yeakub (2009) Investigation of machining parameters for the multiple-response optimization of micro electrodischarge milling. The International Journal of Advanced Manufacturing Technology, 43 (3-4). pp. 264-275. ISSN 0268-3768

Mel, Maizirwan and Osman, Muhammad Irfan and Ihsan, Sany Izan and Hassan, Md Sadikin (2007) A study on engine performance operating on compressed biogas. In: 3rd National Conference on Knowledge Transfer (NCKT'16), 30th Nov.-1st Dec. 2016, Pulau Pinang.

Meskon, Shahrul Razi and Othman, Raihan and Ani, Mohd Hanafi (2018) A secondary, coplanar design Ni/MCM-41/Zn microbattery. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mezeix, Laurent and Mohd Nasir, Mohd Nazreen and Aminanda, Yulfian and Rivai, Ahmad and Ali, Karim Mansur (2014) Parameter study of tool-laminate interface through simulation for composite manufacturing using autoclave process. Applied Mechanics and Materials, 606. pp. 113-117. ISSN 1660-9336

Mezeix, Laurent and Seman, Adam and Muhamad Nazreen, M. Nasir and Aminanda, Yulfian and Rivai, Ahmad and Castanie, Bruno and Olivier, Philippe and Ali, Karim Mansur (2015) Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process. Composite Structures, 124. pp. 196-205. ISSN 0263-8223

Mohamad, Kaleemullah and Faris, Waleed Fekry and Rashid, Muhammad Mahbubur and Hasbullah, F. (2012) Comparative analysis of LQR and robust controller for active suspension. International Journal of Vehicle Noise and Vibration, 8 (4). pp. 367-386. ISSN 1479-148X (O), 1479-1471 (P)

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) Casting investigation of heat treated biocompatible materials for total hip bone replacement. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 151-160. ISBN 9789674181598

Mohamad Sholihin, Mohamad Hanis and Mohd Zaki, Hafizah Hanim and Sarifuddin, Norshahida and Nor Hairin, Assayidatul Laila (2019) Effect of annealing temperatures on surface oxidation of Ti-50.8 at% Ni shape memory alloy. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2018, 18th-19th August, 2018, Grand Riverview Hotel, Kota Bharu.

Mohamed, Abd. Rahman and Asfana, Banu and Ali, Mohammad Yeakub (2014) Investigation of recast layer of non-conductive ceramic due to micro-EDM. Advanced Materials Research, 845. pp. 857-861. ISSN 1022-6680

Mohamed, Abd. Rahman and Atiqah, N. and Ali, Mohammad Yeakub and Chowdhury, M. S. H. (2013) Tool vibration due to high speed micro end milling parameters. Applied Mechanics and Materials, 372. pp. 364-368. ISSN 1660-9336

Mohamed , Konneh and Zawawi, Mohd Shukur (2011) Precision grinding of silicon carbide using 76 µm grain diamond cup wheel. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 178-183. ISBN 9789674181628

Mohamed , Konneh and -, Mohd Fadzil (2011) Precision grinding of silicon carbide using 107 µm Grain diamond cup wheel. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 184-189. ISBN 9789674181628

Mohamed , Konneh and Ahmad, Khairunnisa and Fazleen, Rose (2011) High speed milling of mould steel using 1.5mm-diameter end-mills. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 166-171. ISBN 9789674181628

Mohamed Ali, Jaafar Syed and Hrairi, Meftah and Mohamad, Masturah (2015) Stress analysis of thin-walled laminated composite beams. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10088-10095. ISSN 1819-6608

Mohamed Ali, Jaffar Syed and Mizuar, Iqtidar (2020) MATLAB-Based educational tool for failure analysis of composite laminates. In: UNSPECIFIED.

Mohamed Ariff, Tasnim Firdaus and Azmi , Mohamad Asyraf and Bahar, Rubina (2014) Economic analysis of using e-glass composite wrap repair system for pipelines in Malaysia. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 241-245. ISSN 1991-8178

Mohamed Haider, Farag I. and -, Suryanto (2019) Carbon diffusion in 304I austenitic stainless steel at 650 steel at 650 -750°c in carburizing environment. International Journal of Recent Technology and Engineering (IJRTE, 7 (6). pp. 76-78. ISSN 2277-3878

Mohamed Haneef, Intan Najwa Humaira and Buys, Yose Fachmi and Shaffiar, Norhashimah and Haris, Nurul Assadiqah and Abdul Hamid, Abdul Malek and Syed Shaharuddin, Sharifah Imihezri (2020) Mechanical, morphological, thermal properties and hydrolytic degradation behavior of polylactic acid/polypropylene carbonate blends prepared by solvent casting. Polymer Engineering and Science, 60 (11). pp. 2876-2886. ISSN 0032-3888 E-ISSN 1548-2634

Mohamed Idres, Moumen and Kafafy, Raed (2010) Dynamic thermal model for proton-exchange membrane fuel cell. In: International Conference on Sustainable mobility 2010, 1-3 Dec 2010, Kuala Lumpur, Malaysia. (Unpublished)

Mohamed Yatim, Norazlina and Shaaban, Azizah and Dimin, Mohd Fairuz and Yusof, Faridah and Abdul Razak, Jeefferie (2018) Effect of functionalised and non-functionalised carbon nanotubes-urea fertilizer on the growth of paddy. Tropical Life Sciences Research, 29 (1). pp. 17-35. ISSN 1985-3718 E-ISSN 2180-4249

Mohammad, Amar Sami and Ali, Mohammad Yeakub (2006) Polymeric micro-fluidic channel by hot embossing. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 5-6 Dec 2006, Culture Activity Centre (CAC), IIUM . (Unpublished)

Mohammad, Ammar Sami and Ali, Mohammad Yeakub (2006) Fabricating hot embossing micro tool using electrodischarge machining. In: International Conference on Manufacturing and Materials Processing 2006, 14-16 March 2006, Kuala Lumpur, Malaysia.

Mohammad , Yeakub Ali and -, Wan Emira Azaty and -, Nor Suriza (2011) Micro electro discharge machining of micropillar array: analysis of material removal rate. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 148-153. ISBN 9789674181628

Mohammad , Yeakub Ali and -, Muhammad Lutfi and -, Mohamad Ismail Fahmi (2011) Vibration issue in micro end milling. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 154-158. ISBN 9789674181628

Mohammad , Yeakub Ali and -, Wan Emira Azaty and -, Nor Suriza (2011) Micro electro discharge machining of micro pillar array: analysis of surface finish. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 142-147. ISBN 9789674181628

Mohammad Masum Refat, Chowdhury and Zainul Azlan, Norsinnira (2019) Deep learning methods for facial expression recognition. In: "7th International Conference on Mechatronics Engineering, ICOM 2019", 30 - 31 Oct. 2019, Putrajaya, Malaysia.

Mohammad Meftahul , Ferdaus and Rashid, Muhammad Mahbubur and M.M.I. , Bhuiyan and Asan Gani , Bin Abdul Muthalif (2014) Design and performance evaluation of a self-controlled magneto-rheological damper. International Journal of Robotics and Mechatronics, 2 ( ). pp. 74-80. ISSN 2288-5889

Mohammed, Mohammed Idris and Sulaeman, Erwin and Musthapa, Faizal (2019) Adopting dynamic transient response analysis for sensors positioning to monitor cable stayed bridge. International Journal of Recent Technology and Engineering, 7 (6S). pp. 54-60. ISSN 2277-3878 E-ISSN 2249-8958

Mohammed Idres, Moumen and Hasan, Amar and Kafafy, Raed (2011) One dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-Based thermoelectrically controlled micronozzle. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May 2011, Kuala Lumpur. (Unpublished)

Mohammed Idres, Moumen and Kafafy, Raed and Faris, Waleed Fekry (2011) Air supply system transient model for proton exchange membrane fuel cell. International Journal of Vehicle systems Modelling and Testing, 6 (3/4). pp. 396-407. ISSN 1745-6436

Mohammed Sapardi, Mohd Azan and Hussam, W. K. and Potherat, A. and Sheard, G. J. (2014) Three-dimensional linear stability analysis of the flow around a sharp 180-degree bend. In: 19th Australasian Fluid Mechanics Conference, 8 - 11 Dec 2014, Melbourne, Australia.

Mohammed Sapardi, Mohd Azan and Hussam, Wisam K. and Potherat, Alban and Sheard, Gregory J. (2017) Linear stability of confined flow around a 180-degree sharp bend. Journal of Fluid Mechanics, 822. pp. 813-847. ISSN 0022-1120 E-ISSN 1469-7645

Mohd, Umair Siddique and Ansari, Emaad and Khan, Sher Afghan and Gulhane, Nitin Parashram and Patil, Rajesh (2019) Numerical investigation of nondimensional constant and empirical relation representing nusselt profile nonuniformity. Journal of Thermophysics and Heat Transfer, 34 (1). pp. 215-229. ISSN 0887-8722 E-ISSN 1533-6808

Mohd Zakuan, Muhammad Amir Mirza and Aabid, Abdul and Khan, Sher Afghan (2019) Modelling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology, 9 (1). pp. 6820-6828. ISSN 2249-8958

Mohd Akhir, Nur atiqah and Othman, Maizatulnisa and Fachmi Buys, Yose and Shaffiar, Norhashimah and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2021) Characterization and melt spinning of poly (lactic acid)/poly (ethylene glycol) blends. IIUM Engineering Journal, 22 (1). pp. 201-212. ISSN 1511-758X E-ISSN 2289-7860

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Abdullah, Norazharuddin Shah and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process. Materials Science Forum, 888. pp. 108-111. ISSN 1662-9752

Mohd Ali, Afifah and Hamidon, N. E. and Zaki, N. K.M. and Mokhtar, Suhaily and Ahmad Azhar, Ahmad Zahirani and Bahar, Rubina. and Ahmad, Zainal Arifin Azhar (2018) The effect of cutting parameters on the performance of ZTA-MgO cutting tool. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8- 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohd Ali, Muhamad Khalid and Zainul Azlan, Norsinnira and Ali, Muhammad Aminuddin Anwar (2016) Transfer and heating mechanisms of a curry puff vending machine. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7866-7871. E-ISSN 1819-6608

Mohd Asri, Nurul Anissa and Abdul Hamid, Abd. Malek and Shaffiar, Norhashimah and Sukindar, Nor Aiman and Syed Shaharuddin, Sharifah Imihezri and Hassan, Farid Syazwan (2022) Application of house of quality in the conceptual design of batik wax extruder and printer. IIUM Engineering Journal, 23 (1). pp. 1-23. ISSN 1511-788X E-ISSN 2289-7860

Mohd Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2011) Investigation of microholes produced by focused ion beam micromachining. Advanced Materials Research, 264. pp. 1346-1351. ISSN 1022-6680

Mohd Khairuddin, Ismail and Sidek, Shahrul Na'im and Abdul Majeed, Anwar P.P. and Ahmad Puzi, Asmarani and Md. Yusof, Hazlina (2020) A hybrid automata framework for an adaptive impedance control of a robot-assisted training system. In: RITA 2018. Lecture Notes in Mechanical Engineering . Springer, Singapore, Sigapore, pp. 257-265. ISBN 978-981-13-8322-9

Mohd Nasir, Mohd Narizee and Aminanda, Yulfian and Mezeix, Laurent and Seman, Mh Adam and Rivai, Ahmad and Ali, Karim M (2016) Spring-back simulation of flat symmetrical laminates with angled plies manufactured through autoclave processing. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8th-9th November 2016, Kuala Lumpur, Malaysia.

Mohd Nasir, Mohd Nazreen and Seman, Mh Adam and Mezeix, Laurent and Aminanda, Yulfian and Rivai, Ahmad and Ali, Karim M. (2016) Effect of the corner angle on spring-back deformation for unidirectional L-shaped laminate composites manufactured through autoclave processing. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 315-318. ISSN 1819-6608

Mohd Noor, Siti Salwa and Yaacob, Iskandar Idris (2010) Preparation of manganese zinc ferrite nanoparticles by polymer matrix templated synthesis. Advanced Materials Research, 97-101. pp. 2171-2174. ISSN 1022-6680 (Unpublished)

Mohd Sajali, Muhammad Fahmi and Aabid, Abdul and Khan, Sher Afghan and Mehaboobali, Fharukh Ahmed Ghasi and Sulaeman, Erwin (2019) Numerical investigation of flow field of a non-circular cylinder. CFD Letters, 11 (5). pp. 37-49. ISSN 2180-1363

Mohd Sobli, Nuurul Hudaa and Ismail, Ahmad Fadzil and Asnawi, Ani Liza and Wan Nordin, Mimi Aminah and Khairolanuar, Muhamad Haziq (2016) Assessment of statistical and empirical conversion methods of integration time for rainfall rate in Malaysia. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 201, 9-11 June 2015, Phuket; Thailand.

Mohd Yusof, Muhammad Syafiq and Toha @ Tohara, Siti Fauziah (2019) Gait identification and optimisation for amphi-underwater robot by using ant colony algorithm. International Journal of Recent Technology and Engineering, 7 (6). pp. 277-283. ISSN 2277-3878

Mohd Yusof, Nur Hidayah and Hamzaid, Nur Azah and Jasni, Farahiyah and Khin, Wee Lai (2019) In-socket sensory system with an adaptive neuro-based fuzzy inference system for active transfemoral prosthetic legs. Journal of Electronic Imaging, 28 (2). p. 1. ISSN 1017-9909 E-ISSN 1560-229X

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) MRR and TWR study of powder mix EDM and pure EDM based on response surface methodology. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 13-26. ISSN 2289-7895

Mohd. Amin, Zakaria and Hawlader, Mohammad Nurul Alam and Karim, Azharul (2011) A solar assisted heat pump system for desalination. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 252-261. ISBN 9789674181581

Mohd. Amin, Zakaria and Hawlader, Mohammad Nurul Alam and Ye, Shaochun (2015) Analysis and modelling of solar evaporator collector. IIUM Engineering Journal, 16 (2). pp. 13-29. ISSN 1511-788X E-ISSN 2289-7860

Mohd. Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2010) Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering. Series 1 . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia, pp. 92-97.

Mohd. Yusry, Mustafa and Irfan, Hilmy and Erry Yulian Triblas, Adesta (2015) Effect of surface roughness on adhesion strength in ultrasonic soldering of glass. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9736-9743. ISSN 1819-6608

Mohiuddin, A. K. M. (2011) 2nd generation IIUM buggy car – Part I: design. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 42-47. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) 2nd generation IIUM buggy car – part II: fabrication. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 48-59. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Development of low cost catalytic converter from non-precious metals. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 123-130. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Exhaust system optimization using GT- Power. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 21-28. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Experimental analysis and comparison of performance characteristics of catalytic converters. In: Engine and auxiliary system. IIUM Press, Kuala Lumpur, pp. 1-7. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Experimental analysis and simulation of catalytic converters. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 8-13. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Experimental analysis to determine the relationship between noise and back pressure for muffler design – Part I: Muffler design requirements. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 29-35. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Experimental analysis to determine the relationship between noise and back pressure for muffler design – Part II: Experimental results. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 36-41. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2005) Experimental study in a spray filled tower for flow visualization and drift eliminators characteristics. Journal of Applied Sciences, 5 (2). pp. 284-291. ISSN 1812-5662 (O), 1812-5654 (P)

Mohiuddin, A. K. M. (2011) Investigation of engine performance using designed swirl adapter. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 67-73. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Solar energy management for poverty alleviation and income generating activities. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 91-96. ISBN 9789674181581

Mohiuddin, A. K. M. (2011) Thermal design of mechanical devices using expert system. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 14-20. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. and Husaini, Muhamad (2011) Turbulence model for axial mixing impeller in unbaffled vessel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 97-102. ISBN 9789674181581

Mohiuddin, A. K. M. and Faiz, Ali (2011) Comparison of various types of powertrain used in automotive vehicles in terms of performance and emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Ihsan, Sany Izan and Abd Murat, Noor Azammi (2011) A study of an aftermarket voltage stabilizer for its performance and emission on passengers vehicle. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 60-66. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Kant, K. (1996) Knowledge base for the systematic design of wet cooling towers. Part I: Selection and tower characteristics. International Journal of Refrigeration, 19 (1). pp. 43-51. ISSN 0140-7007

Mohiuddin, A. K. M. and Kant, K. (1996) Knowledge base for the systematic design of wet cooling towers. Part II: Fill and other design parameters. International Journal of Refrigeration, 19 (1). pp. 52-60. ISSN 0140-7007

Mohiuddin, A. K. M. and Kant, Keshav and Sangal, Rajeev (1996) ESTOWER: an expert system for the thermal design of wet cooling towers. Engineering Applications of Artificial Intelligence, 9 (2). pp. 185-194. ISSN 0952-1976

Mohiuddin, A. K. M. and Mohammed Zayan, Jalal (2011) Automotive catalytic converters : current status and some future perspectives. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 80-85. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of emission characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative Energy. IIUM Press, Kuala Lumpur, pp. 74-78. ISBN 9789674181581

Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of performance characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 69-73. ISBN 9789674181581

Mohiuddin, A. K. M. and Mohd Sood, Anwar (2011) 3-Cylinder gasoline direct injection as opposed to 4-cylinder multi-port fuel injection for lower fuel consumption and NOX emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 86-91. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2011) Investigation of spark ignition multipoint engine using water addition - Part II: performance and emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 101-108. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2011) Investigation of spark ignition multipoint engine using water addition - part I : simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 92-100. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Osman, Amirah and Uddin, Mohammad Faisal (2019) Development and investigation of a cooling system for a parked vehicle using solar energy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 87-92. ISSN 2277-3878 E-ISSN 2249-8958

Mohiuddin, A. K. M. and Yap, Haw Shin (2011) Robust design optimization of valve timing using multi-objective genetic algorithm (MOGA). In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 53-59. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Zahari, Izzarief and Aiman, Abdullah (2011) Thermodynamic analysis of combustion of CAMPRO CFE engine – part I: simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 109-115. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Zahari, Izzarief and Aiman, Abdullah (2011) Thermodynamic analysis of combustion of CAMPRO CFE engine – part II: combustion analysis. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 116-122. ISBN 978-967-418-216-8

Mok, C J and Basaruddin, Khairul Salleh and Mat Som, Mohd Hanafi and A. Majid, M.S.A. and Sulaiman, Abdul Razak and Awang, Mohd Shukrimi (2019) Fracture prediction on patient-specific tibia model with osteogenesis Imperfecta under various loading direction. In: "6th International Conference on Applications and Design in Mechanical Engineering 2019, ICADME 2019", 26 - 27 August 2019, Penang.

Mokhtar, Hanan and Sicot , Olivier and Rosseau, Jerome and Aminanda, Yulfian and Aivazaddeh, Shahram (2012) Comparison of single and double impact damage on carbon/epoxy laminates subjected to hygrothermal ageing. In: ECCM 15, 24-28 June 2012, Venice Italy. (In Press)

Mokhtar, Suhaily and A. Raof, Natasha and Muhammad Khairusalleh, Nor Khairusshima and Dahnel, Aishah Najiah (2020) A review on the application of various MQL base in metal cutting operation of aluminum alloys. Test Engineering and Management, May-June 2020. pp. 1168-1174. ISSN 0193-4120

Mokhtar, Suhaily and Amin, A. K. M. Nurul and Patwari, Anayet Ullah and A. Azhar, A. Hazim and A. R., Zulkhari (2010) Enhancement of machinability of nickel based alloy - inconel 718 by induction preheating in end milling using ceramic inserts. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Mokhtar, Suhaily and Amin, A. K. M. Nurul and Patwari, Md Anayet Ullah and Abdul Razak, Nurhayati (2011) Machinability improvement by workpiece preheating during end milling AISI H13 hardened steel. Advanced Materials Research, 264-65 (2). pp. 894-900. ISSN 1662-8985

Mokhtar , Hanan and Sicot, Olivier and Rousseau, Jerome and Aminanda, Yulfian and Aivazzadeh, Shahram (2012) The effect of double impact on hygrothermally aged carbon epoxy laminates. In: Diracoys 2012, 17 - 19 September 2012, Brussel Belgium. (Unpublished)

Mondal, Kuheli and Das, Saurav and Hamada, Nozomu and Haji Abu, Aminudin and Das, Saikat and Faris, Waleed Fekry and Toh, Hoong Thiam and Ahmad, Akij (2019) An improved narrowband active noise control system without secondary path modelling based on the time domain. International Journal of Vehicle Noise and Vibration, 15 (2-3). pp. 110-132. ISSN 1479-1471

Mori, Shoji and Mt Aznam, Suazlan and Yanagisawa, Ryuta and Yokomatsu, Fumihisa and Okuyama, Kunito (2019) Measurement of a heated surface temperature using a high-speed infrared camera during critical heat flux enhancement by a honeycomb porous plate in a saturated pool boiling of a nanofluid. Heat Transfer Engineering. ISSN 0145-7632 E-ISSN 1521-0537 (In Press)

Moudood, M. A. and Sabur, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Effect of peak current on material removal rate for electrical discharge machining of non-conductive Al2O3 ceramic. Advanced Materials Research, 845. pp. 730-734. ISSN 1022-6680

Mridha, Shahjahan (2011) Alloy coating on steel surfaces by melt synthesis of elemental metal powders. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 53-58. ISBN 9789674181642

Mridha, Shahjahan (2005) Titanium nitride layer formation by TIG surface melting in a reactive environment. Journal of Materials Processing Technology, 168 (3). pp. 471-477. ISSN 0924-0136

Mridha, Shahjahan and Amuda, Muhammed Olawale Hakeem (2011) Grain refining in AISI 430 ferritic stainless steel welds by addition of metal powder. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 41-47. ISBN 9789674181642

Mridha, Shahjahan and Law, Shao Beng (2011) Influences of additives on copper film quality and gap filling capability of plating process. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 34-40. ISBN 9789674181642

Mst., Nafisa Tamanna Shantaa and Zainul Azlan, Norsinnira (2015) Function approximation technique based sliding mode controller adaptive control of robotic arm with time-varying uncertainties. Procedia Computer Science , 76. pp. 87-94. ISSN 1877-0509

Mt Aznam, Suazlan and Mori, Shoji and Ogoshi, Azuki and Okuyama, Kunito (2017) CHF enhancement of a large heated surface by a honeycomb porous plate and a gridded metal structure in a saturated pool boiling of nanofluid. International Journal of Heat and Mass Transfer, 115. pp. 969-980. ISSN 0017-9310

Mt Aznam, Suazlan and Shoji, Mori and Ryuta, Yanagisawa and Kunito, Okuyama (2015) Critical heat flux enhancement in saturated pool boiling using water-based nanofluid with honeycomb porous plate. In: The 23rd International Conference on Nuclear Engineering, 17th-21st May 2015, Chiba, Japan.

Mudzaffar, Raqibah Najwa and Mohd Khairy, Hanani Hani and Mohd Zaki, Nur Khairunisa and Ahmad Azhar, Ahmad Zahirani and Manshor, Hanisah and Rejab, Nik Akmar and Mohd Ali, Afifah (2020) Comparative study on the performance of zta cutting tool with the addition of different particle size of mgo additive. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd-24th July 2019, Kangar, Perlis.

Muhamad Khairussaleh, Nor Khairusshima and Che Haron, Che Hassan and A. Ghani, Jaharah (2016) Study on wear mechanism of solid carbide cutting tool in milling CFRP. Journal of Materials Research, 31 (13). pp. 1893-1899. ISSN 0884-2914

Muhammad , Mahbubur Rashid (2011) Design and implementation of instant noodles vending machine. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 80-87. ISBN 9789674181734

Muhammad Mahbubur, Rashid and M. Rabani bin , M.Romlay and M.M, Ferdaus and Abdullah , Al-Mamun (2015) Development of electronic rain gauge system. International Journal of Electronics and Electrical Engineering, 3 (4). pp. 245-249. ISSN 2301-380X

Muhammad Mahbubur, Rashid and Nasrudin Abd, Rahim and Mohamed Azlan, Hussain and Faisal A., Mohamed and Mahmudur Azizur, Rahman (2008) Development and testing of hybrid fuzzy logic controller for car suspension system using magneto-rheological damper. In: Industry Applications Society Annual Meeting, 2008. IAS'08. IEEE, 5 - 9 October 2008, Edmonton, AB; Canada.

Mujtaba, M. A. and Kalam, Mohammad Abul and Masjuki, Haji Hassan and Soudagar, Manzoore Elahi M. and Khan, Haris Mehmood and Fayaz, Hussain and Farooq, Muhammad and Gul, Mustabshirha and Ahmed, Waqar and Ahmad, Mushatq and Munir, Mamoona and Yaqoob, Haseeb and Samuel, Olusegun David and Razzaq, Luqman (2021) Effect of palm-sesame biodiesel fuels with alcoholic and nanoparticle additives on tribological characteristics of lubricating oil by four ball tribo-tester. Alexandria Engineering Journal, 60 (5). pp. 4537-4546. ISSN 1110-0168 E-ISSN 2090-2670

Mujtaba, M. A. and Masjuki, Haji Hassan and Kalam, Mohammad Abul and Ong, Hwai Chyuan and Gul, M. and Farooq, Muhammad and Soudagar, Manzoore Elahi M and Ahmed, Waqar and Harith, M. H. and Yusoff, Mohammad N.A.M. (2020) Ultrasound-assisted process optimization and tribological characteristics of biodiesel from palm-sesame oil via response surface methodology and extreme learning machine - Cuckoo search. Renewable Energy, 158. pp. 202-214. ISSN 0960-1481

Mujtaba, Muhammad Abbas and Masjuki, Haji Hassan and Kalam, Md. Abul and Noor, Fahad and Farooq, Muhammad and Hwai, Chyuan Ong and Gul, Mustabshirha and Soudagar, Manzoore Elahi M. and Bashir, Shahid and Md Rizwanul Fattah, Islam and Razzaq, Luqman (2020) Effect of additivized biodiesel blends on diesel engine performance, emission, tribological characteristics, and lubricant tribology. MDPI, 13 (13). pp. 1-15. E-ISSN 1996-1073

Mustafa, Aisyah Madihah and Abd Halim, Nor Farah Huda and Tomadi, Siti Haryani and Shahruddin, Najlah Sakinah and Nasaruddin, Ricca Rahman (2022) Analysis on tool wear during milling carbon fiber reinforced polymer in dry, coolant and chilled air condition. Jurnal Tribologi, 36 (March 2023). pp. 99-107. E-ISSN 2289-7232

Mustafa, Aisyah Madihah and Ahd Suhaimi, Ahmad Basyir and Shahruddin, Najlah Sakinah and Abd Halim, Nor Farah Huda (2021) An experimental investigation on surface quality of CFRP after milling in cutting fluid environment. In: 7th International Conference on Applications and Design in Mechanical Engineering (ICADME 2021), 23 August 2021, Virtual.

N

Nabinejad, Omid and Debnath, Sujan and Beh, Jack Kai and Ali, Mohammad Yeakub (2018) Mechanical performance and moisture absorption of unidirectional bamboo fiber polyester composite. In: 8th International Conference on Manufacturing Science and Technology, ICMST 2017, 23-25 June 2017, Hong Kong.

Nafiah, Faris and Sophian, Ali (2017) Pulsed eddy current imaging of inclined surface cracks. Indonesian Journal of Electrical Engineering and Informatics, 5 (4). pp. 309-316. ISSN 2089-3272

Naing, Lwinthein and Mohd Ghani, Ahmad Shahril and Sahalan, Muhammad Irsyad and Abdul Aziz, Mazlan and Zainal Abidin, Zulkifli and Rashid, Muhammad Mahbubur (2018) Development and fieldwork trial of autonomous surface vehicles for bathymetry mapping. In: 7th IEEE International Conference on Underwater System Technology: Theory and Applications, USYS 2017, 18 - 20 December 2017, Menara Razak, UTM Kuala Lumpur.

Nasry, Nasrul Ashraf and Mahmud, Khairus Syakirah and Hilmy, Irfan and Ismail, Md Yusof and Basri, R. H. (2015) Energy consideration in pharmaceutical factory layout. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17427-17432. ISSN 1819-6608

Nimir, Yassin Lutfi Mahmud (2011) Comparison between composites reinforced with natural and synthetic fibers : Part I. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 143-150. ISBN 978-967-418-216-8

Nimir, Yassin Lutfi Mahmud (2011) Comparison between composites reinforced with natural fibres and synthetic fibres Part II. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 151-155. ISBN 978-967-418-216-8

Nimir, Yassin Lutfi Mahmud (2011) Production of aluminium reinforced with SiC particulates using powder metallurgy. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 156-159. ISBN 978-967-418-216-8

Nimir, Yassin Lutfi Mahmud (2011) Production of aluminum-silicon carbide composites using powder metallurgy at sintering temperatures above the aluminum melting point part II. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 138-142. ISBN 978-967-418-216-8

Noor Azam, Nor Afiqah and Ibrahim, Ahmad Imran and Abdul Rahman, Farah Diyana (2020) Dynamic analysis on rugby ball kicking parameters. Solid State Technology, 63 (2s). pp. 2893-2899. ISSN 0038-111X

Nordin, Nor Hidayati Diyana and Abdul Muthalif, Asan Gani and M Razali, M khusyaie (2018) Control of transtibial prosthetic limb with magnetorheological fluid damper by using a fuzzy PID controller. Journal of Low Frequency Noise, Vibration & Active Control, 37 (4). pp. 1067-1078. ISSN 0263-0923

Nordin, Norhuda Hidayah and Sulaiman, Mohd Hafis and Leong, Zhaoyuan (2021) Nano-indentation and indentation size effect on different phases in Lamellar structure high entropy alloy. In: Green Tribology. CRC PRESS, pp. 177-186. ISBN 978-0-367-68860-8

Norsahperi, N.M.H. and Ahmad, Salmiah and Toha, Siti Fauziah and Mahmood, I.A. (2021) Analysis and practical validation on a multi-linkage scissor platform's drive system for the satellite test facilities. International Journal of Heavy Vehicle Systems, 28 (1). pp. 1-14. ISSN 1744-232X

Nurdin, Irwan and Yaacob, Iskandar Idris and Johan, Mohd. Rafie (2016) Enhancement of thermal conductivity and kinematic viscosity in magnetically controllable maghemite (γ-Fe2O3) nanofluids. Experiment Thermal and Fluid Science, 77. pp. 265-271. ISSN 0894-1777

Nyein Naing, Wai Yan and Htike@Muhammad Yusof, Zaw Zaw (2014) Advances in automatic tuberculosis detection in chest x-ray images. Signal & Image Processing : An International Journal (SIPIJ), 5 (6). pp. 41-53. ISSN 2229-3922

O

Okasha, Mohamed Elsayed Aly Abd Elaziz and I, Shuib and Mahmoud Idres, Moumen Mohammed (2017) Investigation of Malaysian low earth orbits for remote sensing applications. IOP Conference Series: Materials Science and Engineering, 184 (012009). 012009-1. ISSN 1757-8981

Olowolayemo, Akeem Koye and Md Tap, Abu Osman and Mantoro, Teddy (2014) Fuzzy logic based compensated Wi-Fi signal strength for indoor positioning. In: 2nd International Conference on Advanced Computer Science Applications and Technologies, ACSAT 2013, 23-24 December, 2013, Kuching, Sarawak; Malaysia.

Omar, Ashraf Ali and Asrar, Waqar (2012) Numerical investigation of the effect of spoilers configuration on wake vortex. Research Report. [s.n]. (Unpublished)

Omar, Ashraf Ali E. and Ong, Jiunn Chit and Asrar, Waqar and Ismail, Ahmad Faris (2009) Accuracy of Bhatnagaar-Gross-Krook scheme in solving laminar viscous flow problems. AIAA Journal, 47 (4). pp. 885-892. ISSN 0001-1452

Omar, Hanafy and Idres, Moumen and Kafafy, Raed (2012) Particle Swarm-Based Micro Air Launch Vehicle Trajectory Optimization Method. http://www.google.com/patents/US8332085.

Omar, Hanafy and Idres, Moumen and Kafafy, Raed (2011) Particle swarm optimization of micro air launch vehicle trajectory. Canadian Aeronautics and Space Journal, 57 (2). pp. 115-120. ISSN 1712-7998 (O)

Omar, Mohd Arif Faiz and Ismail, Mohd Zain and Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa (2011) Intelligent postal mails sorter. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 183-187. ISBN 9789674181734

Omar, Nurihan and Syed Mohamad, Sharifah Najwa and Aminanda, Yulfian and Syed Mohamed Ali, Jaffar and Kashif, Syed Muhammad (2012) Experimental study on jute-fiber-epoxy composite plate subjected to impact loading. Advanced Materials Research, 576. pp. 232-235. ISSN 1022-6680

Omar, Nurihan and Syed Mohd, Sharifah Najwa and Aminanda, Yulfian and Syed Mohamed Ali, Jaffar and Kashif, Syed Muhammad (2011) Experimental observation of Jute/Epoxy composite plate subjected to impact loading. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Legend Hotel, Kuala Lumpur. (Unpublished)

Osman, Muhammad Naqib and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh (2020) Substrate placement inside CVD tube for graphene production. In: Materials Science Forum. Trans Tech Publications Ltd, Kuantan, Malaysia, pp. 84-91. ISBN 978-303571664-1

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 3rd International Conference on Green Engineering & Technology 2021 (IConGETech), 4th February 2021, Virtual conference. (Unpublished)

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 1st International Conference on Material Processing and Technology (ICMProTech 2021), Virtual.

Othman, Maizatulnisa and Buys, Yose Fachmi and Shaffiar, Norhashimah and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2021) Characterisation and production of Poly (Lactic/Acid)/poly (Ethylene Glycol) microfiber via melt drawn spinning process. IIUM Engineering Journal, 22 (1). pp. 201-212. ISSN 1511-788X E-ISSN 2289-7860

P

Pan, Chunlan and Alqahtani, Aisha M. and Wei, Haoran and Sulaiman, Nadzril and Elsiddieg, Awatif M.A. and Ghoushchi, S.P. (2024) Heat transfer enhancement of a heat exchanger using novel multiple perforated magnetic turbulators (MPMT): an experimental study. International Journal of Thermal Sciences, 195 (1). pp. 1-9. ISSN 1290-0729 E-ISSN 1778-4166

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it’s prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020. Tome VII, 1. pp. 89-96. ISSN 1584-2665

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Computational analysis for the prediction chip serration frequency in end milling of steel AISI1020. In: Malaysian Metallurgical Conference, MMC 2008, 3 - 4 December 2008, UKM, Bangi, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Third International Conference on Mechatronics (ICOM) 2008, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference, 15 - 17 December 2008, Chennai, India.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. and Ginta, Turnad Lenggo (2008) A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C). In: International Conference on Science & Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and S., Farahain (2011) Chip serration frequency-the primary cause of chatter during end milling operation. Advanced Materials Research, 264-26. pp. 1174-1179. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2008) Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008), 21-23 May, 2008, Johor Baru, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Sharulhazrin, M. S. and Hafizzudin , I (2010) A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45). In: International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010, 17-19 March, 2010, Hong Kong.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Ishtiyaq, M. H. (2011) A coupled artificial neural network and RSM model for the prediction of chip serration frequency in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 117-122. ISBN 9789674181758

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Characterisation of dynamic behaviour of vertical machining centre components: experimental and simulation approaches. International Journal of Engineering Systems Modelling and Simulation, 1 (4). pp. 231-241. ISSN 1755-9766

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration, 4-6 January 2009, Cairo, Egypt.

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S.K. (2009) Dynamic modal analysis of vertical machining centre components. Advances in Acoustics and Vibration, 2009 (508076). pp. 1-10. ISSN 1687-6261

Pebrianti, Dwi and Bayuaji, Luhur and Mahdiana, Deni and Md Yusof, Hazlina and Ahmad Zabidi, Suriza (2023) Problem based learning in aerospace engineering education: case study of MECH 4129 Engineering Lab IV (pre-liminary result). In: 6th International Conference on Engineering Professional Ethics and Education 2023 (ICEPEE'23), 15th - 16th August 2023, Virtual Conference.

Purwanto, Hadi and ., Muta'alim and Dahlan, Yuhelda and Saleh, Nuryadi and ., Pramusanto (2011) Upgrading of iron-rich laterite ore using reverse flotation. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 27-33. ISBN 9789674181642

Purwanto, Hadi and ., Pramusanto (2011) Upgrading of laterite ore by reduction and learning. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674181642

Purwanto, Hadi and Mohd. Salleh, Hamzah and Mohamad, A. S. and Zakiyuddin, A. (2018) Effect of EFB content on reducibility of low grade iron ore composite at 1000°C - 1200°C. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Q

Quadros, Jaimon Dennis and Khan, Sher Afghan (2020) Prediction of base pressure in a suddenly expanded flow process at supersonic mach number regimes using ANN and CFD. Journal of Applied Fluid Mechanics, 13 (2). pp. 499-511. ISSN 1735-3572 E-ISSN 1735-3645

Quadros, Jaimon Dennis and Khan, Sher Afghan and Prashanth, T. (2020) Experimental and numerical investigation of suddenly expanded flow field for supersonic Mach numbers with and without annular cavities. International Journal of Fluid Mechanics Research, 47 (4). pp. 337-356. ISSN 2152-5102 E-ISSN 2152-5110

R

R, Sharmin and Muhammad Mahbubur, Rashid and M.M, Ferdaus and Raju, Ahamed (2014) Energy and environmental impact for development of multipurpose PADMA bridge. International Journal of Renewable Energy Resources, 4 (1). pp. 18-27. ISSN 2289-1846

Radin Umar, Radin Zaid and Ahmad, Nadiah and Halim, Isa and Lee, Poh Yan and Abdul Hamid, Abd. Malek (2019) Design and development of an ergonomic trolley-lifter for sheet metal handling task: a preliminary study. Safety and Health at Work, 10 (3). pp. 327-335. ISSN 2093-7911 E-ISSN 2093-7997

Radin Umar, Radin Zaid and Ling, Chaifong and Abdullasim, Nazreen and Ahmad, Nadiah and Halim, Isa and Abdul Hamid, Abd. Malek (2019) Occupational wrist postural assessment and monitoring system: development and initial validation. Journal of Engineering Science and Technology, 14 (6). pp. 3421-3436. ISSN 1823-4690

Rahat, Arifutzzaman and Ismail, Ahmad Faris and Khan, Ahsan Ali and Alam, Md Zahangir and Rahman, Saidur (2020) Effect of particle loading on the stability of the water based iron-oxide nanofluids. International Journal of Advanced Science and Technology, 29 (1). pp. 1326-1333. ISSN 2005-4238 E-ISSN 2207-6360

Rahimi, Norzihan and Hussain, Ahmad Kamil and Shaik Dawood, Mohd. Sultan Ibrahim and Mohd Alias, Adib Zulfadhli and Md Yusoff, Muhamed Hafiy Afiq and Mahmud, Jamaluddin (2018) Failure analysis of woven Kevlar/Epoxy under uniaxial tension. International Journal of Engineering and Technology(UAE), 7 (4). pp. 235-239. ISSN 2227-524X

Rahman, Kawthar and Abdul Muthalif, Asan Gani and Shua'ib, Nurul F. (2011) Smart system for monitoring electrical power usage at homes. In: Mechatronics Book Series: System design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 25-29. ISBN 9789674181321

Rahman, MM and Hamada, Khalaf I and Noor, M.M and Maleque, Md. Abdul and A. Bakar, Rosli and Kadirgama, K. (2010) Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences , 7 (10). pp. 1364-1371. ISSN 1546-9239

Rahman, Md. Mozasser and Abdul Rahim, Siti Fatimah (2011) Design and development of a sorting machine using multiple sensory system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 52-57. ISBN 9789674181734

Rahman, Md. Mujibur and Ismail, M. A. and Sopyan, Iis and Rahman, H. Y. (2018) Effects of forming temperature and sintering rate to the final properties of FeCuAl powder compacts formed through uniaxial die compaction process. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Rahman, Md. Mustafizur and Hamada, Khalaf I and Noor, M.M and Bakar, Rosli A. and Kadirgama, K. and Maleque, Md. Abdul (2010) In-cylinder heat transfer characteristics of hydrogen fueled engine: a steady state approach. American Journal of Environmental Sciences, 6 (2). pp. 124-129. ISSN 1553-345X

Rahman, Md. Mustafizur and Mat Noor, Muhamad and Kadirgama, K. and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Modeling, analysis and fatigue life prediction of lower suspension arm. Advanced Materials Research, 264. pp. 1557-1562. ISSN 1022-6680

Rahman, Mohammed Ataur (2011) Performance investigation of energy efficient hybrid engine towards green technology. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 131-137. ISBN 978-967-418-216-8

Rahman, Mohammed Ataur and Abdi, Yusuf (2017) A novel electro conductive graphene/silicon-dioxide thermo-electric generator. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Amsyar, Mohamad and Ihsan, Sany Izan and Mohiuddin, A. K. M. (2018) Electro-hydro-mechanical braking system for passenger vehicle. Journal of Applied Science, 2018. pp. 1-9. ISSN 1812-5654 E-ISSN 1812-5662 (In Press)

Rahman, Mohammed Ataur and Hassan, Nurul and Jaffar, Abdul Hassan and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2019) Study on the development of electromagnetic two speed gearbox for EV. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 147-152. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2009) Electromagnetic actuated CVT system for vehicle. In: IEEE International Conference on Industrial Engineering and Engineering Management, 2009 (IEEM 2009), 8-11 December 2009, Hong Kong.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Sakif, Ahsan (2019) Development of electro-hydro automatic parking braking system for automotive system. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 264-269. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Hossain, Altab and Alam, A. H. M. Zahirul (2012) Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology, 26 (7). pp. 1-9. ISSN 1738-494X E-ISSN 1976-3824

Rahman, Muhammad Shafiur and Rashid, Muhammad Mahbubur and Hussain, Mohamed Azlan (2012) Thermal conductivity prediction of foods by Neural Network and Fuzzy (ANFIS) modeling techniques. Food and Bioproducts Processing, 90 (2). pp. 333-340. ISSN 09603085

Rahman, S. M. A. and Hawlader, Mohammad Nurul Alam (2011) Performance of evaporator collector and air collector in a solar assisted heat pump dryer. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 269-282. ISBN 9789674181581

Rahman , Md Mozasser and Md Zain @Abdul Rahman, Najiah and Jamil, Mohd Syazwan (2011) Control of automatic drilling machine by PLC. In: Mechatronic book series: Control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 62-73. ISBN 9789674181765

Rahman , Md Mozasser and Mohamed Rasied, Anwar Hussain and Ismail, Ahmad Zulkamal (2011) Design and development of automatic paper box folding machine. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 8-19. ISBN 9789674181734

Rahman Khan, Md. Ashikur and Rahman, Md. Mustafizur and Mat Noor, Muhamad and Maleque, Md. Abdul (2011) Current research trends on dry, near-dry and powder mixed electrical discharge machining. Advanced Materials Research, 264. pp. 956-961. ISSN 1022-6680

Ramesh, Kumar R and Karthik, K and Elumalai, P.V. and Alshahrani, Saad and Ağbulut, Ümit and Saleel, C Ahamed and Shaik, Saboor and Khan, Sher Afghan (2023) Investigation of Nano composite heat exchanger annular Pipeline flow using CFD analysis for Crude Oil and Water Characteristics. Case Studies in Thermal Engineering, 49. pp. 1-23. ISSN 2214-157X

Ramesh, Singh and Tan, Chou Yong and Tolouei, Ranna and Amiriyan, Mahdi and Purbolaksono, Judha and Sopyan, Iis and Teng, Wan Dung (2012) Sintering behavior of hydroxyapatite prepared from different routes. Materials and Design, 34. pp. 148-154. ISSN 0261-3069

Ramli, Mohd Syamsul and Zainul Azlan, Norsinnira (2014) Design and development of an anthropomorphic shoe-tying robot. In: 2014 10th France-Japan/ 8th Europe-Asia Congress on Mecatronics (MECATRONICS 2014) , 27th-29th Nov. 2014, Tokyo, Japan.

Ramli, Muhammad Faiz and Shamsudin, Syariful Syafiq and Legowo, Ari (2017) Obstacle detection technique using multi sensor integration for small unmanned aerial vehicle. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 441-449. ISSN 2502-4752 E-ISSN 2502-4760

Ramli, Muhammad Faiz and Shamsudin, Syariful Syafiq and Legowo, Ari (2018) Safe avoidance path detection using multi sensor integration for small unmanned aerial vehicle. In: 5th IEEE International Workshop on Metrology for AeroSpace, MetroAeroSpace 2018, 20 - 22 June 2018, Rome; Italy.

Ramli, Nabilah and Jamaluddin, Hishamuddin and Mansor, Shuhaimi B. and Faris, Waleed Fekry (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). pp. 59-71. ISSN 1745-6436 E-ISSN 1745-6444

Ramli, Siti Fatirah and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily and Dahnel, Aishah Najiah and A. Raof, Natasha (2022) Optimization of machining parameters during milling of carbon fibre reinforced plastics. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 - 30 September 2020, Langkawi, Malaysia.

Ramli, Siti Fatirah and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily and Dahnel, Aishah Najiah and A. Raof, Natasha (2022) Optimization of machining parameters values during milling on carbon fiber reinforced plastic (CFRP) using RSM. Malaysian Tribology Society, 34. pp. 24-38. E-ISSN 2289-7232

Rasdi, Muhammad Hannan Fathi and Nik Hashim, Nik Nur Wahidah and Hanizam, Syahirah (2019) Around view monitoring system with motion estimation in ADAS application. In: 7th International Conference on Mechatronics Engineering, ICOM 2019, 30 - 31 Oct 2019, Putrajaya.

Rasedee, Ahmad Fadly Nurullah and Rakhimov, Abdumalik and Akhmedov, Anvarjon (2017) Uniform convergence of the Fourier-Laplace series. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016, 15th-17th November 2016, Putrajaya, Malaysia.

Rasheed, Abdul Khaliq and Kafafy, Raed Ismail and Faris, Waleed Fekry and Mohd. Salleh, Hamzah (2011) Enhancement of polymerase chain reaction using graphene nano-flakes. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Rasheed, Aous Naji and Abdul Muthalif, Asan Gani and Saleh, Tanveer (2014) Enhancing μ-wedming (wire electro-discharge machining) of polished silicon wafer by conductive coating. Journal of Manufacturing Technology Research, 5 (1-2). pp. 1-17. ISSN 1943-8095

Rashid, Muhammad Mahbubur (2011) Development of auto parking system & auto billing system using image processing technique (Part 1). In: Mechatronics book series: System Design and signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 267-273. ISBN 9789674181321

Rashid, Muhammad Mahbubur (2011) Development of auto parking system & auto billing system using image processing technique (Part 2). In: Mechatronics book series: System design and signal processing - volume 2. IIUM Press, Kuala Lumpur, pp. 274-280. ISBN 9789674181321

Rashid, Muhammad Mahbubur (2011) Development of auto parking system& auto billing system using image processing technique (Part 3). In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 281-288. ISBN 9789674181321

Rashid, Muhammad Mahbubur and ., Azhar (2011) Design of controller for elevator group using fuzzy logic Part 1. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 128-132. ISBN 9789674181765

Rashid, Muhammad Mahbubur and ., Azhar (2011) Design of controller for elevator group using fuzzy logic controller Part 2. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 133-138. ISBN 9789674181765

Rashid, Muhammad Mahbubur and A., Musa and M, Ataur Rahman and A, Farahana and A., Farhana (2012) Automatic parking management system and parking fee collection based on number plate recognition. International Journal of Machine Learning and Computing (IJMLC), 2 (2). pp. 93-98. ISSN 2010-3700

Rashid, Muhammad Mahbubur and Abd Rahim, Nasrudin and Islam, Zahurul (2011) Design and development of controller of active power filter for industrial usage part 1. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 13-20. ISBN 9789674181765

Rashid, Muhammad Mahbubur and Abd Rahim, Nasrudin and Islam, Zahurul (2011) Design and development of controller of active power filter for industrial usage part 2. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 21-29. ISBN 9789674181765

Rashid, Muhammad Mahbubur and Abdullah, Faruk and Salami, Momoh Jimoh Eyiomika (2011) Development of intelligent belt conveyor system. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 45-49. ISBN 9789674181765

Rashid, Muhammad Mahbubur and Alliays, Farouk (2011) Development of intelligent belt conveyor system (Part 1). In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 39-44. ISBN 9789674181765

Rashid, Muhammad Mahbubur and Firdaus, Md Meftahul and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2015) ANSYS finite element design of an energy saving magneto-rheological damper with improved dispersion stability. Journal of Mechanical Science and Technology, 29 (7). pp. 2793-2802. ISSN 1738-494X E-ISSN 1976-3824

Rashid, Muhammad Mahbubur and Hussain, M.A and Khan, Md. Raisuddin (2009) Development of hybrid controller of wheeled robot for mine detection. In: ICMET'09 - Proceedings of the 2009 International Conference on Mechanical and Electrical Technology , 8 August 2009 through 11 August 2009, Beijing.

Rashid, Muhammad Mahbubur and M.A, Hussain and N.Abd, Rahim (2006) Application of magneto-rheological damper for car suspension control. Journal of Applied Sciences, 6 (4). pp. 933-938. ISSN 1812-5654

Rashid, Muhammad Mahbubur and Molik, Md. Sazib and Rahman, Mohammed Ataur and Jahiman, Mohd Azmin (2014) The design and development of small electric vehicles (EV) using power inverter based AC motor. In: 3rd International Conference on Mathematical Applications in Engineering 2014 (ICMAE’14), 23rd-25th Sept. 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Rashid, Z.A. and A. Fuad, M.F.I. and Alias, A.B. and Ahmad, M.A. and M. Arif, M. A. and Zainal, S. and Asuat, A.Y. and Jamaludin, Iqbal and Abdullah, A. (2023) Severity impact of a Vapour Cloud Explosion (VCE) – Liquefied Petroleum Gas (LPG) road tanker accident. ASM Science Journal, 18. pp. 1-7. ISSN 1823-6782 E-ISSN 2682-8901

Rashmi, Walvekar and Siddiqui, Mohammad Khalid and Ismail, Ahmad Faris and Saidur, R. and Rashid, A. K. (2015) Experimental and numerical investigation of heat transfer in CNT nanofluids. Journal of Experimental Nanoscience, 10 (7). pp. 545-563. ISSN 1745-8099

Razali, Nor Zafirah and Sultan, M.T.H and Aminanda, Yulfian (2014) The study of impact behaviour of two types of glass fibre reinforced polymer (GFRP) subjected to low velocity impact. Advanced Materials Research, 1044. pp. 153-157. ISSN 1022-6680

Rehman, Fazal ur and Khan, Qudrat and Akmeliawati, Rini (2019) Synchronization and antisynchronization protocol design of chaotic nonlinear gyros: an adaptive integral sliding mode approach. Turkish Journal of Electrical Engineering & Computer Sciences, 27 (1). pp. 675-684. ISSN 1300-0632 E-ISSN 1303-6203

Revichandran, Rajeanderan and Mohiuddin, A. K. M. (2019) Two-phase thermosyphon filled with R410A refrigerant operating at low evaporator temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 9-20. ISSN 2289-7879

Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Factors affecting thermosyphon performance- A review of studies. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 124-133. ISSN 2277-3878

Reyad, Mehfuz and Ali, Mohammad Yeakub (2006) Micro/Meso Mechanical Manufacturing (M4): opportunities and challenges: a review. In: Regional Postgraduate Conference on Engineering and Science, 26th-27th Jul, 2006, UTM, Malaysia. (Unpublished)

Ridhuan Siradj , Fadly Jashi Darsivan and Shahimi, Sharis Shazzali (2014) Ride quality comparison of a quarter car model with a nonlinear hydraulic damper and an andre hartford friction damper. In: International Conference on Innovative Trends in Multidisciplinary Academic Research (IMTAR 2014), 20th-21st October 2014, Istanbul, Turkey.

Ridhuan Siradj , Fadly Jashi Darsivan and Wahyudi, Martono and Faris, Waleed Fekry and Ata, A.A (2007) Artificial neural network based vibration control of active engine mounting isolation system. In: 4th International Symposium on Mechatronics and its Applications (ISMA07), 26th-29th March 2007, Sharjah, U.A.E. (Unpublished)

Roslan, Muhamad Fahmi Mohd and Shaffiar, Norhashimah and Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2018) Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Gombak, Kuala Lumpur.

Roslan, Muhamad Hafizuddin and Bahar, Rubina and Hilmy, Irfan (2019) Experimental investigation on fresh water production using air gap membrane distillation. International Journal of Engineering & Technology, 7 (6). pp. 229-234. ISSN 2277-3878

Rosman, Nur Afiqah and Illias, Suhaimi and Hussain, Suhaila and Ashrul Ishak, Mohamad Shaiful and Ani, Mohd Hanafi (2020) Experimental investigation of critical heat flux during impact of a droplet onto hot horizontal surface. International Journal of Emerging Trends in Engineering Research, 8 (5). pp. 1663-1666. ISSN 2347-3983

S

Sabaneh, Omar A. O. and Faris, Waleed Fekry and Okasha, Mohamed Elsayed Aly Abd Elaziz and Hasbullah, Faried (2016) A mixed control system for active suspension for off-road vehicles. International Journal of Vehicle Noise and Vibration, 12 (2). pp. 101-137. ISSN 1479-148X E-ISSN 1479-1471

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Khan, Ahsan Ali (2013) Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic. Procedia Engineering, 56. pp. 696-701. ISSN 1877-7058

Safri, S. N. A. and Hameed Sultan, Mohamed Thariq and Aminanda, Yulfian (2014) Impact characterisation of Glass Fibre Reinforced Polymer (GFRP) type C-600 and E-800 using a drop weight machine. Applied Mechanics and Materials, 629. pp. 461-466. ISSN 1660-9336

Sahar, Abdul Hafiz and Muhamat, Khairul Azhar and Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa (2011) A conceptual paper on intelligent car battery monitoring system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 171-176. ISBN 9789674181734

Saharin, Sanisah and Lefort, Benoite and Morin, Celine and Chauveau, Christian and Le Moyne, Luis and Kafafy, Raed (2011) Vaporization characteristics of 1-propanol droplets at high temperatures. In: ILASS – Europe 2011, 24th European Conference on Liquid Atomization and Spray System, 5 - 7 September 2011, Estoril, Portugal.

Saharin, Sanisah and Lefort, Benoite and Morin, Celine and Chauveau, Christian and Le Moyne, Luis and Kafafy, Raed (2011) Vaporization characteristics of ethanol droplets: Influence of the environment humidity. In: Proceedings of ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, British Columbia, Canada.

Salami, Momoh Jimoh Emiyoka and Aibinu, Abiodun Musa and Mohd Sufian, Siti Sarah (2011) Intelligent shoe guard system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 20-28. ISBN 9789674181734

Salami, Momoh Jimoh Emiyoka and Mir-Nasiri, N. and Khan, Md. Raisuddin (2003) Development of mechatronics engineering degree program : challenges and prospects. International . Journal for Engineering Education, 19 (4). pp. 537-543. ISSN 0949-149X

Salami, Momoh Jimoh Emiyoka and Rashid, Muhammad Mahbubur and Mohammad, Noor (2011) Design and implementation of an intelligent fuzzy logic controller (FLC) for Air Handling Unit (AHU) for smart house. Australian Journal of Basic and Applied Sciences, 5 (3). pp. 641-652. ISSN 1991-8178

Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa (2011) Conceptual design of an intelligent coconut dehusking. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 155-162. ISBN 9789674181734

Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa and Mohd Jahini, Syahrain (2011) Intelligent CCTV-based monitoring system for Kulliyyah of Engineering, IIUM. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 225-230. ISBN 9789674181734

Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa and Salami, Abdulazeez F. and Basrah, Mohd Sofian (2011) Anti skid control system, a tutorial. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 50-61. ISBN 9789674181765

Salami, Momoh Jimoh Eyiomika and Khalifa, Othman Omran and Jibia, Abdussamad Umar (2010) Analysis of transient using homomorphic deconvolution technique. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Saleel, Ahmed and Baig, Maughal Ahmed Ali and Khan, Sher Afghan (2018) Experimental investigation of the base flow and base pressure of sudden expansion nozzle. In: International Conference on Aerospace and Mechanical Engineering (AeroMech17), 21st-22nd November 2017, Batu Ferringhi, Penang.

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (2011) The effect of R-ratio on fatigue crack propagation in plasticised PVC and modified PVC. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 170-174. ISBN 9789674181680

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (2011) The effect of R-ratio on fatigue crack propagation in un-plasticised PVC and modified PVC. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 175-179. ISBN 9789674181680

Samewoi, Abdul Rahman and Zainul Azlan, Norsinnira and Khan, Md Rasiuddin and Yamaura, Hiroshi (2020) Computed torque and velocity feedback control of cooperative manipulators handling a flexible beam. International Journal of Nanoelectronics and Materials, 13 (Special Issue). pp. 17-34. ISSN 1985-5761 E-ISSN 1997 - 4434

Saputra, Hens and Assayidatul Laila, Nor Hairin and Sutjipto, Agus Geter Edy and Muhida, Riza and Mohd Hanafi, Ani and Othman, Raihan (2010) A breathing microbattery: Zn/MCM-41/O2 system. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26-27 January 2010, Kuala Lumpur.

Sarkar, Md. Rasel and Julai, Sabariah and Chong, Wen Tong and Toha @ Tohara, Siti Fauziah (2019) Effectiveness of nature-inspired algorithms using ANFIS for blade design optimization and wind turbine efficiency. Symmetry, 11 (4). pp. 1-20. ISSN 2073-8994

Sediono, Wahju (2011) Design and implementation of a simple queueing system for vehicle traffic simulator. In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 99-106. ISBN 9789674181321

Sediono, Wahju (2011) Design of software tool to detect QRS complex from ECG signal. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 98-103. ISBN 9789674181734

Sediono, Wahju (2011) GIS-based vehicle traffic simulation. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 177-182. ISBN 9789674181734

Sediono, Wahju and Lestari, Andrian Andaya (2011) Principles of FMCW radar signal processing. In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, Malaysia, pp. 91-98. ISBN 9789674181321

Seoh, Hian Teh and Yaacob, Iskandar Idris (2011) The effect of cobalt addition on structural and magnetic properties of electrodeposited iron-platinum nanocrystalline thin films. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 155-162. ISBN 9789674181642

Seong, Tony Ow Koon and Salleh, Hanim and Nordin, Anis Nurashikin (2014) Optimization of resonator design for vibration-based electromagnetic energy harvester. In: 4th International Conference on Noise, Vibration and Comfort, NVC 2012, 26- 28 November 2012, Kuala Lumpur; Malaysia.

Seprianto, Dicky and ., Iskandar and R., Wilza and Adesta, Erry Yulian Triblas (2019) Influence of internal fill pattern, polishing time and Z-Axis orientation on the tensile strength of the 3D printed part. International Journal of Recent Technology and Engineering, 7 (6). pp. 170-174. ISSN 2277-3878

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Computation of stability derivatives of an oscillating cone for specific heat ratio = 1.66. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang.

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Estimation of stability derivatives in newtonian limit for oscillating cone. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21-22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Shafie, Amir Akramin and Khan, Md. Raisuddin and Islam, M Shehzad (2011) Trajectory planning using GPS for Unmanned Aerial Vehicle with microcontroller based system. In: Mechatronics book series: System design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 215-223. ISBN 9789674181321

Shafie, Amir Akramin and Samudin, N. (2011) A case for cooperative vision system. In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 202-207. ISBN 9789674181321

Shafie, Amir Akramin and Syukur, E. A. and Sidek, N. I. (2011) Path following autonomous vehicle based on vision system. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 208-214. ISBN 9789674181321

Shah, Jawad and Okasha, Mohamed and Faris, Waleed Fekry (2018) Gain scheduled integral linear quadratic control for quadcopter. International Journal of Engineering and Technology, 7 (4.13 (Special issue 13)). pp. 81-85. ISSN 2227-524X

Shah, Qasim Hussain (2012) Effect of steel, cooper, and lead projectile impact on the damage process of brittle materials. Research Report. s.n, Kuala Lumpur. (Unpublished)

Shah, Qasim Hussain and ., Hanis Naily and ., Nur Syuhada (2011) Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May,2011, Kuala Lumpur, Malaysia. (Unpublished)

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Damage assessment of liquid filled container subjected to free fall on rigid steel plate. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 127-133. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Damage of polycarbonate armor plate subjected to impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 106-111. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Energy absorbing capability of materials subjected to impact under gravity loading. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 120-126. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Experimental results of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 71-76. ISBN 978-967-418-174-1

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Experimental setup of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 66-70. ISBN 978-967-418-174-1

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Failure mechanism of PC armor plates with PMMA sacrificial layer subjected to impact. In: Advanced Topics inMmechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 93-105. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Finite element to predict damage of a polycarbonate armor plate subjected to impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 112-119. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Numerical analysis on materials energy absorbing capability under gravity loading impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 134-140. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Numerical assessment of liquid filled container subjected to free fall on rigid steel plate. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 141-147. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 61-65. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation results of pipe whip impact at 55° angle. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 82-86. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation results of pipe whip impact at 90° angle. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 87-92. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation setup of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 77-81. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Cylindrical shell buckling under axial compression load. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 3-7. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental and simulation results of cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 41-47. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 13-17. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling for 50mm stroke. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 18-23. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling for 60mm stroke. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 24-29. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental setup of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 8-12. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Simulation results of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 35-40. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Simulation setup of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 30-34. ISBN 9789674181741

Shah, Qasim Hussain and Topa, Ameen (2015) Investigation of energy absorption capabilities of compressed and uncompressed crushable foams. Mechanical Engineering Journal, 2 (5). pp. 1-8. ISSN 2187-9745

Shah, Sugrib Kumer and Haque, Md. Mohafizul and Maleque, Md. Abdul (2010) Prediction of heat flow through sand mould and its verification on the structure and property of gray cast iron. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2). pp. 208-213. ISSN 1823-0334

Shahruddin, Najlah Sakinah and Abd Halim, Nor Farah Huda and Mustafa, Aisyah Madihah and Tomadi, Siti Haryani and Mahad, Muhammad Akmal and Adesta, Erry Yulian Triblas (2023) Effect of feed rate on tool wear and surface condition during milling of CFRP. Jurnal Tribologi, 38. pp. 40-48. E-ISSN 2289-7232

Shanta, Mst. Nafisa Tamanna and Zainul Azlan, Norsinnira (2016) Adaptive sliding mode control with radial basis function neural network for time dependent disturbances and uncertainties. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4123-4129. E-ISSN 1819-6608

Sharol, Ahmad Fadzil and Abdul Razak, Amir and Abdul Majid, Zafri Azran and Azmi, Muhammad Amirul Azwan and Muhammad Tarminzi, Muhammad Amir Syahiran (2020) Evaluation on the performance of cross-matrix absorber double-pass solar air heater (CMA-DPSAH) with and without thermal energy storage material. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 37-49. ISSN 2289-7879

Sharol, Ahmad Fadzil and Abdul Razak, Amir and Abdul Majid, Zafri Azran and Fudholi, Ahmad (2019) Experimental study on performance of square tube absorber with phase change material. International Journal of Energy Research, 44 (2). pp. 1000-1011. ISSN 0363-907X E-ISSN 1099-114X (In Press)

Sharuddin, Muhammad Hazman and Sulaiman, Mohd Hafis and Kamaruddin, Shafie and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda and Mohd Jamir, Mohd Ridzuan and Abdul-Rani, Ahmad Majdi (2023) Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Special Issue: MYTRIBOS 2022. pp. 1-10. ISSN 1350-6501 E-ISSN 2041-305X

Shasthri, Sivaguru and Kausalyah, Venkatason and Shah, Qasim Hussain and MahmoudIdres, Moumen Mohamed and Wong, S. V. (2016) A parametric study of neck moment response in a 3 year old child subjected to oblique side impact. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5126-5133. ISSN 1819-6608

Siddiqi, Abdul Rahman and Sidek, Shahrul Na'im (2017) EMG based continuous thumb-tip force model for prostheses design. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-472-8

Siddiqi, Abdul Rahman and Sidek, Shahrul Na'im (2016) Estimation of continuous thumb angle and force using electromyogram classification. International Journal of Advanced Robotic Systems, 13 (5). ISSN 17298814 E-ISSN 17298814

Siddique, Mohd Umair and Khan, Sher Afghan and Al-Robaian, Abdulrahman and Ansari, Eman (2019) Numerical study of heat transfer augmentation using pulse jet impinging on Pin Fin heat sink. CFD letters, 11 (3). pp. 84-91. ISSN 2180-1363

Siddiqui, Umair and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2020) Numerical investigation of secondary peaks in Nusselt profile under water jet impingement. Journal of Thermophysics and Heat Transfer, 34 (2 (April-June)). pp. 421-428. ISSN 0887-8722 E-ISSN 1533-6808

Sidek, Khairul Azami and Khalil, Ibrahim (2011) Person identification in irregular cardiac conditions using electrocardiogram signals. In: 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011, 30 Aug.-3 Sept. 2011, Boston, MA.

Sidek, Shahrul Na'im (2012) Robotic platform to assist in the upper extremity rehabilitation. In: FBSU-UVSQ-IIUM Workshop: Interactive Robotic Assistance for the Physically Challenged, 7 Mar. 2012, Tabuk-Kingdom of Saudi Arabia.

Sidek, Shahrul Na'im and Haja Mohideen, Ahmad Jazlan and Wan Sulaiman, Wan Nizam Hakim (2011) Noninversive EMG signals measurement and control of robotic system for rehabilitation. In: Mechatronis engineering projects: theory and applications. IIUM Press, International Islamic University Malaysia, pp. 80-97. ISBN 9789674181925

Sidek, Shahrul Na'im and Haja Mohideen, Ahmad Jazlan and Wan Sulaiman, Wan Nizam Hakim (2010) A portable myoelectric-robotic system to prevent muscle stiffness and numbness. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Sidek, Shahrul Na'im and Salami, Momoh Jimoh Emiyoka (2001) Hardware implementation of intelligent braking system. In: Proceeding of the First International Conference on Mechatronics (ICOM’01), Feb. 2001, Kuala Lumpur.

Sinaga, Nazaruddin and Mel, Maizirwan and Bagus Suryasa Majanasastra, R. and DIgdpyo, Aji (2020) Enhancement of M15 engine performance by the addition of propylene glycol. International Journal of Emerging Trends in Engineering Research ( IJETER ), 8 (6). pp. 2594-2599. E-ISSN 2347 - 3983

Sirat, Mohd Shukri and Ismail, Edhuan and Ramlan, Amir Hakimi and Fauzi, Fatin Bazilah and Yaacob, Iskandar Idris and Mohamed, Mohd Ambri and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2019) Influence of surface energy and elastic strain energy on the graphene growth in chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Solihin, Mahmud Iwan and Wahyudi, Martono and Legowo, Ari (2010) Fuzzy-tuned PID anti-swing control of automatic gantry crane. Journal of Vibration and Control, 16 (1). pp. 127-145. ISSN 1077-5463

Sophian, Ali (2017) Eddy current non-destructive testing of renewable energy systems. In: Borneo International Conference on Applied Mathematics and Engineering, 25th-26th October 2017, Balikpapan, East Kalimantan, Indonesia. (Unpublished)

Sopyan, Iis (2010) Manganese doping on biphasic calcium phosphate ceramics for machanical improvement. Medical Journal of Malaysia, 65. pp. 14-16. ISSN 0300-5283

Sudin, Izman and Abdul-Kadir, Mohammed Rafiq and Anwar, Mahmood and Engku Abu Bakar, Engku Mohd Nazim and Nalisa, Adila and Konneh, Mohamed (2011) Effect of carburization process on adhesion strength of ti carbide layer on titanium alloy substrate. Advanced Materials Research, 197. pp. 219-224. ISSN 1022-6680

Suffian, S. A. and Abdullah Sidek, 'Atiah and Md. Yusof, Hazlina and Al Hazza, Muataz Hazza Faizi (2018) Inventory data on commercial broiler chicken production system using life cycle assessment approach: A case study. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Suhaily, Mokhtar and Amin, A. K. M. Nurul and Patwari, Md Anayet Ullah (2011) Prediction of surface roughness in high speed machining of Inconel 718. Advanced Materials Research, 264-65. pp. 1193-1198. ISSN 1662-8985

Suhaimi, Muhammad Nazri and Wahid, Azni Nabela and Nordin, Nor Hidayati Diyana and Md Nor, Khairul Affendy (2022) Optimal piezoelectric shunt damper using enhanced synthetic inductor: simulation and experimental validation. IIUM Engineering Journal, 23 (1). pp. 424-433. ISSN 1511-788X E-ISSN 2289-7860

Sukindar, Nor Aiman and Mohd Samsudin, Noorazizi and Syed Shaharuddin, Sharifah Imihezri and Kamaruddin, Shafie (2022) The effects of FDM printing parameters on the compression properties of polymethylmethacrylate (PMMA) using finite element analysis. International Journal of Integrated Engineering, 14 (2). pp. 86-92. ISSN 2229-838X E-ISSN 2600-7916

Suksuwan, Wasu and Wae-Hayee, Makatar and Mel, Maizirwan (2018) Development of mini pilot fluidized bed gasifier for industrial approach: Preliminary study based on continuous operation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 35-43. ISSN 2289-7879

Sulaeman, Erwin (2011) Aeroelastic stability problem of air vehicle. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 187-194. ISBN 9789674181451

Sulaeman, Erwin (2011) Alternate expansion series for the incomplete cylindrical function. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 135-139. ISBN 9789674181451

Sulaeman, Erwin (2011) Analytical derivation of the incomplete cylindrical functions: imaginary part. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 130-134. ISBN 9789674181451

Sulaeman, Erwin (2011) Analytical derivation of the incomplete cylindrical functions: real parts. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 123-130. ISBN 9789674181451

Sulaeman, Erwin (2011) Minimum denominator of rational function. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 88-93. ISBN 9789674181451

Sulaeman, Erwin (2011) Overview of dynamics of flexible air vehicle. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 76-82. ISBN 9789674181451

Sulaeman, Erwin (2011) Torsional stiffness matrix of non-prismatic beam elements. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 94-98. ISBN 9789674181451

Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Badran, Marwan A A (2018) Trilinear finite element solution of three dimensional heat conduction partial differential equations. International Journal of Engineering & Technology (UAE), 7 (4.36). pp. 379-384. ISSN 2227-524X

Sulaeman, Erwin and Kapania, Rakesh (2011) Analytical Finite Element Formulation of Non-uniform Euler-Bernoulli Beam. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Sulaiman, Mohd Hafis and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Dahnel, Aishah Najiah and Kamaruddin, Shafie (2022) Friction and wear behaviours of hard-coated/uncoated bearing steels under nano-additive oil lubrication. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 - 30 September 2020, Langkawi, Malaysia.

Sutjipto, Agus Geter Edy (2011) The possibility of utilizing scanning electron microscope for materials characterization. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 127-134. ISBN 9789674181642

Sutjipto, Agus Geter Edy and Abdul Gafar, Liyana and Roselan, Nor Azyati Syazwina (2011) Piezoelectric effect of zinc oxide thin film as source of energy for sensor applications. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 135-140. ISBN 9789674181642

Sutjipto, Agus Geter Edy and Abdul Gafar, Liyana and Roselan, Nor Azyati Syazwina (2011) Study on zinc oxide crystal growth. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 141-146. ISBN 9789674181642

Sutjipto, Agus Geter Edy and Muhida, Riza (2011) Green nanotechnology using SEM and AFM. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 147-153. ISBN 9789674181642

Sutjipto, Agus Geter Edy and Purwanto, Hadi (2011) Introduction to probability safety assessment of nuclear power plant. IIUM Press, Kuala Lumpur. ISBN 9789674180546

Sutjipto, Agus Geter Edy and Yahya, Roslan (2011) Microstructure and mechanical properties of neutron transmutation doped silicon under Cf-252 Neutron Bombardment. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 16-26. ISBN 9789674181642

Sutjipto, Agus Geter Edy and Yahya, Ruslan and Muhida, Riza (2010) Novel nuclear technology for controlled production of n-type semiconductor. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26-27 January 2010, Kuala Lumpur.

Syahir, A. Z. and Mohd Zulkifli, Nurin Wahidah and Hassan, Masjuki and Abul Kalam, Mohammad and Harith, M. H. and Yusoff, M. N.A.M. and Zulfattah, Z. M. and Jamshaid, Muhammad (2019) Tribological improvement using ionic liquids as additives in synthetic and bio-based lubricants for steel-steel contacts. Tribology Transactions, 63 (2). pp. 235-250. ISSN 1040-2004 E-ISSN 1547-397X

Syed Abdul Bahari, Syed Najib and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Quality improvement of Three-way Catalytic Converter (TWC) system: application of failure modes and effects analysis (FMEA) methodology. LAP Lambert Academic Publishing, Germany. ISBN 9783845443287

Syed Abu Bakar, Syed Noh and Abdalla, Mostafa M. and Faris, Waleed Fekry (2010) A study of annular plate buckling problem with tension loaded at inner edge. Analele Universitatii 'Eftimie Murgu', 17 (1). pp. 97-103. ISSN 1453-7397 E-ISSN 2344-4568

Syed Abu Bakar, Syed Noh and Abdalla, Mostafa M. and W. F., Waleed (2016) Buckling analysis of isotropic circular plate with attached annular piezoceramic plate. Malaysian Journal of Mathematical Sciences, 10. pp. 443-458. ISSN 1823-8343

Syed Mohamed Ali, Jaffar (2014) Thermoelastic solutions for flexure of anisotropic cylindrical shells. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Syed Mohamed Ali, Jaffar and Abdullah, Kassim Abdulrahman and Aminanda, Yulfian (2013) Effect of cross sectional shape on the energy absorbing characteristics of a tube under quasi-static loading. Applied Mechanics and Materials, 315. pp. 334-338. ISSN 1660-9336

Syed Mohamed Ali, Jaffar and Abeid Abeid , Rubeya (2014) LEADME : an educational software for composite laminate analysis and design. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali and Ali, Muhammad Atif and Mohd Baseair, Abdul Rahman (2017) Numerical investigation of aerodynamic characteristics of high speed train. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kuala Lumpur, Malaysia.

T

Tajuddin, Maisarah and Ahmad, Zuraida and Ismail, H. (2016) A review of natural fibers and processing operations for the production of binderless boards. BioResources, 11 (2). pp. 5600-5617. ISSN 1930-2126

Tajuddin, Maisarah and Ahmad , Zuraida and Sulaiman, Mohd Faris Haikal and Halim, Zahurin and Maleque, Md. Abdul (2016) Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Tan, Chee Pin and Chiew, Yeong Shiong and Chase, Geoffrey and Chiew, Yeong Woei and Desaive, Thomas and Md Ralib, Azrina and Mat Nor, Mohd Basri (2018) Model iterative airway pressure reconstruction during mechanical ventilation asynchrony: shapes and sizes of reconstruction. In: 2nd International Conference for Innovation in Biomedical Engineering and Life Sciences (ICIBEL 2017) in conjunction with APCMBE 2017, 10th-13th Dec 2017, Penang, Malaysia.

Tanasta, Z. and Muhamad, Pauziah and Kuwano, Noriyuki and Mohd Yatim, Norfazrina Hayati and Unuh, Mohd Hishamuddin (2018) Reduction of defects on microstructure aluminium nitride using high temperature annealing heat treatment. In: 3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering 2017, ICMMPE 2017, 22nd–23rd November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Tarik, Alamgir and Rashid, Muhammad Mahbubur and Khan, Md. Raisuddin (2013) Development of a tentacle propulsion technique for underwater application. In: 5th International Conference on Mechatronics (ICOM’13), 2 - 4 July 2013, Kuala Lumpur.

Teh, Seoh Hian and Yaacob, Iskandar Idris (2011) Synthesis and characterization of Co-Fe nanocrystalline magnetic films electrodeposited from electrolyte solution containing sodium saccharin. IEEE Transactions on Magnetics, 47 (10). pp. 4398-4401. ISSN 0018-9464

Teh, Sooh Hian and Yaacob, Iskandar Idris (2010) The effect of cobalt addition on structural and magnetic properties of electrodeposited iron-platinum nanocrystalline thin films. Materials Science Forum, 654-6. pp. 1736-1739. ISSN 02555476

Tijani, Ismaila and Akmeliawati, Rini (2011) Fuzzy logic-based intelligent control of flexible link manipulator. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 139-147. ISBN 9789674181765

Toha, Siti Fauziah and Haja Mohideen, Mohammad Zafran (2011) Intruder avoidance system via short message service (SMS). In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 65-70. ISBN 9789674181321

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Automatic intelligent ordering system design and tools selection. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 46-51. ISBN 9789674181734

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Automatic intelligent ordering system: design and tools selection. In: Mechatronics Book Series System design and signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 233-239. ISBN 9789674181321

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Automatic smart card purchasing system for express kiosk. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 240-246. ISBN 9789674181321

Toha, Siti Fauziah and Tokhi, M. Osman (2011) System identification technique for a helicopter using genetic algorithms. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 304-310. ISBN 9789674181765

Toha, Siti Fauziah and Tokhi, Mohammad Osman (2011) Real-coded moga for intelligent control of a flexible manoeuvring system. In: Computational intelligence robust control theory and application. IIUM Press, Kuala Lumpur, pp. 28-56. ISBN 9789674181963

Tomadi, Siti Haryani and Mokhtar, Suhaily and Hassan, Mas Ayu and Daud, Rosdi (2020) Prediction of cutting force by using finite element method in end-milling of AISI 1018 medium carbon steel. TEST Engineering and Management, May – June 2020. 1067 -1071. ISSN 0193-4120

U

Uddin, Md. Nasir and Rahman, Md Ahbubur and Rashid, Muhammad Mahbubur and Nithe, N. A. and Rony, J. I. (2016) A mechanism concept and design of reconfigurable robot for rescue operation. Global Journal of Researches in Engineering: a Mechanical and Mechanics Engineering, 16 (1, ver. 1.0). pp. 25-33. ISSN 0975-5861 E-ISSN 2249-4596

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Aziz, M. A. and Nithe, N. A. (2016) Maximum power point charge controller for DCDC power conversion in solar PV system. Global Journal of Researches in Engineering: a Mechanical and Mechanics Engineering, 16 (1, ver.1). pp. 19-34. ISSN 0975-5861 E-ISSN 2249-4596

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Mostafa, Mohammad Golam and Hossain, Belayet and Nithe, N. A. (2016) Global energy: need, present status, future trend and key issues. Global Journal of Researches in Engineering: a Mechanical and Mechanics Engineering, 16 (1, ver. 1). pp. 35-51. ISSN 0975-5861 E-ISSN 2249-4596

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Mostafa, Mohammad Golam and Hossain, Belayet and Salam, S. M. and Nithe, N. A. and Aziz, M. A. and Halder , S (2016) Design & development of electric cable inspection. Global Journal of Researches in Engineering: a Mechanical and Mechanics Engineering, 16 (4. ver.1). pp. 55-63. ISSN 0975-5861 E-ISSN 2249-4596

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Nithe, N. A. (2016) Comparative study of integrated transceiver for real time monitoring in rescue operation. EIJO: Journal of Civil Engineering, Architecture, Interior Design and Innovative Research (EIJO–CEAIDIR), 1 (1 (May-June)). pp. 23-30. ISSN 2456-1819 E-ISSN 2456-1819

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Nithe, N. A. (2016) Three phase UPFC regulator with reduced bus capacitance for solar PV application system. Global Journal of Researches in Engineering: a Mechanical and Mechanics Engineering, 16 (4, ver.1). pp. 25-31. ISSN 0975-5861 E-ISSN 2249-4596

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Nithe, N. A. and Rony, J. I. (2016) Investigation of physical and thermo-chemical characteristics of biomass fuels from local agricultural residues. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Nithe, N. A. and Rony, J. I. (2016) An investigation on the performance of a single cylinder diesel engine using biodiesel. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Ullah Patwari, Mohammed Anayet and Amin, A. K. M. Nurul and Istihyaq , M.H. and Faris, Waleed Fekry (2010) Development of a mathematical model for the prediction of chip formation instability and its verification by fuzzy logic with genetic algorithm. International Journal of Machining and Machinability of Materials (IJMMM), 8 (1/2). pp. 38-54. ISSN 1748-572X

Ungku, Abdul Hafiz and Hoda, Asif and Asrar, Waqar (2015) A numerical investigation of explicit pressure-correction projection methods for incompressible flows. Engineering Applications of Computational Fluid Mechanics. pp. 1-16. ISSN 1994-2060 (P) 1997-003X (O)

Ushama, Imama Karim Manba and Shafie, Amir Akramin (2011) Al-Jazari on automata. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 165-170. ISBN 978-967-418-157-4

W

WAY Yusoff, wan and Hadi Puwanto, purwanto and Farizahani, mohd and P.T Pham, Duc (2014) Investigation into the differences Chemical properties of Laser Sintering polymer powders using Fourier Transform Infrared Spectroscopy. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10-11 April 2014, Seoul.

Wahyudi, Martono and Sato, Kaiji and Shimokohbe, Akira (2005) Robustness evaluation of three friction compensation methods for point-to-point (PTP) positioning systems. Robotics and Autonomous Systems, 52 (2-3). pp. 247-256. ISSN 0921-8890

Wai Lee, Jay Wing and Chiew, Yeong Shiong and Wang, Xin and Tan, Chee Pin and Mat Nor, Mohd Basri and Damanhuri, Nor Salwa and Chase, Geoffrey and UNSPECIFIED and UNSPECIFIED (2021) Stochastic modelling of respiratory system elastance for mechanically ventilated respiratory failure patients. Annals of Biomedical Engineering. pp. 1-16. ISSN 00906964 E-ISSN 15216047

Walvekar, Rashmi and Siddiqui, Mohammad Khalid and Ong, SeikSan and Ismail, Ahmad Faris (2015) Application of CNT nanofluids in a turbulent flow heat exchanger. Journal of Experimental Nanoscience, 11 (1). pp. 1-17. ISSN 17458080

Walvekar , Rashmi Gangasa and Ismail, Ahmad Faris and Mohamed, Khalid and Yusof, Faridah (2011) CFD studies on natural convection heat transfer of Al2O3-water nanofluids. Heat Mass Transfer, 47 (10). pp. 1301-1310. ISSN 1432-1181 (O), 0947-7411 (P)

Wan Abdul Hamid, Wan Luqman Hakim and Basharuddin, Nurul 'Ilya and Sukindar, Nor Aiman (2022) Adaptive solar panel - overview and conceptual design. IOP Conf. Series: Materials Science and Engineering, 1244. pp. 1-7. ISSN 17578981, 1757-899X

Wan Sabr, Wan Muhd Arif and Zabidi, Irfan Rahim and Abd Musthalib, Mohd Aliff and Muhamad, Zimam Amer and Mohd Hazman, Muhammad Irfan and Mohd Yusof, Muhammad Syafiq and Naing, Lwinthein and Zainal Abidin, Zulkifli (2018) Low-cost remotely operated underwater vehicle for underwater observation purposes. In: 7th IEEE International Conference on Underwater System Technology: Theory and Applications, USYS 2017, 18 - 20 December 2017, Menara Razak, UTM Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza (2018) Product development and cost analysis of fabricating the prototype of roller clamp in intravenous (I.V) tubing medical devices using fused deposition modeling (FDM) technology. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Adesta, Erry Yulian Triblas and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda (2011) The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, 22 - 24 Jan 2011, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2014) Investigation of the thermal properties of different grades Polyamide 12 (PA12) in improving laser sintering process (SLS). Advanced Materials Research, 548/49. pp. 294-296. ISSN 1022-6680

Warimani, Mahammadsalman and Chaudhary, Zakir Ilahi and Khan, Sher Afghan and Bellary, Sayed Ahmed Imran and Alam, Noor and Muthuswamy, Sonachalam (2023) Analytical evaluation of loss mechanism effects on PDE performance with variation of refilling beta parameters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 66-78. E-ISSN 2289-7879

Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris and Saharin, Sanisah and Ariffin, Ahmad Kamal (2021) Internal flow dynamics and performance of pulse detonation engine with alternative fuels. Energy, 237. pp. 1-10. ISSN 0360-5442

Welford, John and Apsley, Judith M. and Forsyth, A.J. and Sophian, Ali (2012) Fidelity requirements in brushless permanent magnet motor modelling. In: 6th IET International Conference on Power Electronics, Machines and Drives, 27th-29th March 2012, Bristol, United KIngdom.

Wilza, R. and ., Iskandar and Seprianto, Dicky and Adesta, Erry Yulian Triblas (2019) Optimization of parameters in three dimensional printing objects with fused deposition modeling technology against geometry accuracy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 175-179. ISSN 2277-3878

Y

Yaacob, Iskandar Idris and Kamarulzaman, Norlida and Basirun, Wan Jeffry (2011) Synthesis and characterization of lithium manganese copper oxides for use in lithium rechargeable cells. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 59-64. ISBN 9789674181642

Yap, Suk Wy and Johari, Norhasnidawani and Mazlan, Saiful Amri and Hassan, Noor Azlina (2021) Mechanochemical durability and self-cleaning performance of zinc oxide-epoxy superhydrophobic coating prepared via a facile one-step approach. Ceramics International, 47 (11). pp. 15825-15833. ISSN 0272-8842 E-ISSN 1873-3956

Yeakub Ali, Mohammad and Ali Khan, Ahsan and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus (2019) Noble approach to control vibration using minimum quantity lubrication (MQL) in micro milling. Research Report. UNSPECIFIED. (Unpublished)

Yosri, Muhammad Hafizan and Muhamad, Pauziah and Lee, Kee Quen and Mohd Yatim, Norfazrina Hayati (2020) Analysis of air flow around the painting line for dust reduction: an experimental and numerical study. CFD Letters, 12 (9). pp. 36-50. ISSN 2180-1363

Yuan , S. and Ngoi, B. K. A. and Hung, N. P. and Ali, Mohammad Yeakub (2004) Fabrication of microcomponents by injection molding. In: International Conference on Precision Engineering (ICoPE) 2003/04, 02-05 March 2004, Singapore.

Yusaf, Talal F. and Shamsuddin, Abdul Halim and Ali, Yusoff and Ismail, Ahmad Faris (1996) Design modification of high speed diesel engine to accomodate compressed natural gas. RERIC International Energy Journal, 18 (1). pp. 19-26. ISSN 1513-718X

Yusof, M. Q.M. and Harun, H. N.S.B. and Bahar, Rubina (2018) Experimental investigation of minimum quantity lubrication in meso-scale milling with varying tool diameter. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Yusof, Noor Jazilah and Kamaruddin, Shafie (2021) Optimal design of step – cone pulley problem using the bees algorithm. In: Intelligent Manufacturing and Mechatronics. Lecture Notes in Mechanical Engineering . Springer Nature Singapore Pte Ltd, Singapore, pp. 139-149. ISBN 978-981-16-0865-0

Yusof, Yusliza and Ahmad, Zuraida (2011) The effect of fiber content on cotton reinforced albumen composites. IIUM Engineering Journal, 12 (2). ISSN 1511-788X

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohd Ali, Afifah and Mohd Daud, Farah Diana and Mohamad Badari, Siti Norbahiyah (2020) A comparative study on mechanical properties of carbon and Kenaf composites via vacuum infusion technique. Journal of Engineering Science, 16 (1). pp. 97-107. ISSN 2180-4214

Z

Zahid, Rehan and Bhutta, Muhammad Usman and Mufti, Riaz Ahmad and Abdullah, Muhammad Usman and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Muhammad Abul and Ali, Mian Ashfaq and Aslam, Jawad and Akhtar, Khalid (2021) Friction and Wear Performance Evaluation of Bio-Lubricants and DLC Coatings on Cam/Tappet Interface of Internal Combustion Engines. Materials, 14 (23). pp. 1-23. ISSN 1996-1944

Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Machouche, Salah and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha @ Tohara, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016, 7th-8th May 2016, Kuala Lumpur.

Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. (2016) Development of integrated science textbooks by applying the enrich tool. Journal of Education and Social Sciences (JESOC). pp. 6-13. E-ISSN 2289-9855

Zainal, Rodhiah and Khan, Md. Raisuddin and Billah, Md. Masum (2011) Development of robotic manipulator to assist human by using brain signal. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 117-122. ISBN 9789674181734

Zainul Azlan, Norsinnira and Lukman, Nurul Syuhadah (2020) Assist as needed control strategy for upper limb rehabilitation robot in eating activity. IIUM Engineering Journal. ISSN 1511-788X E-ISSN 2289-7860

Zainul Azlan, Norsinnira and Sanni, Mubeenah Titilola and Shahdad, Ifrah (2020) Low-cost pick and place anthropomorphic robotic arm for the disabled and humanoid applications. International Journal of Applied Research and Smart Technology (ARSTech).. ISSN 2722-9637 E-ISSN 2722-9645 (In Press)

Zainul Azlan, Norsinnira and Sayed Jaafar, Syarifah Nurul Syuhada (2014) Adaptive control of robotic arm carrying uncertain time-varying payload based on function approximation technique. In: 6th International Conference on Social Robotics (ICSR 2014), 27th-29th October 2014, Sydney, Australia.

Zainul Azlan, Norsinnira and Yamaura, Hiroshi (2013) Adaptive impedance control for unknown non-flat environment. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering , 7 (2). pp. 191-196. ISSN 2010-376X E-ISSN 2010-3778

Zainul Azlan, Norsinnira and Yamaura, Hiroshi (2012) Anthropomorphic finger with optimized geometric parameters for pinching and grasping tasks. Mechanism and Machine Theory , 49. pp. 52-66. ISSN 0094-114X

Zainul Azlan, Norsinnira and Yamaura, Hiroshi (2011) Experimental studies of position control of linkage based robotic finger. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5 (10). pp. 2017-2023. ISSN 2010-376X E-ISSN 2010-3778

Zainul Azlan, Norsinnira and Yamaura, Hiroshi (2012) FAT based adaptive impedance control for unknown environment position. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 6 (8). 1538 -1543. ISSN 2010-3778 (O), 2010-376X (P)

Zainul Azlan, Norsinnira and Yamaura, Hiroshi (2011) Modeling and control of compact anthropomorphic robot finger. In: International Conference on Modelling, Identification and Control, 26th-29th June, 2011, Shanghai, China.

Zainul Azlan , Norsinnira and Yamaura, Hiroshi (2013) Adaptive impedance control for unknown time-varying environment position and stiffness. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 7 (2). pp. 283-289. ISSN 2010-376X E-ISSN 2010-3778

Zakaria, Abd Hafiz and Mohd Mustafah, Yasir and Abdullah, Jaafar and Alang Rashid, Nahrul Khair and Abdullah, Taufiq (2017) Development of autonomous radiation mapping robot. In: IEEE International Symposium on Robotics and Intelligent Sensors, IRIS 2016, 17 - 20 December 2016, Hosei UniversityTokyo; Japan.

Zakaria, Faiz and Hrairi, Meftah and Daoud, Jamal Ibrahim (2018) Multi-objective optimization of incremental sheet metal forming. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil and Mohd Azmi, Mohd Syahriman (2023) Mathematical model development of evacuated glass-thermal absorber tube Collector (EGATC) for air heating application. Journal of Science And Mathematics Letters, 11 (1). pp. 73-82. ISSN 2462-2052 E-ISSN 2600-8718

Zuheir, Mohammad and El-Faitouri, Abdulhafed S. and Rajab, Zakariya and Khalil, Ashraf F. and Alfergani, Asma and Khan, Sheroz and Ahmed, Syed Faiz and Ali, Athar (2018) A comparison between solar thermal and photovoltaic/thermal (PV/T) systems for typical household in Libya. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

This list was generated on Mon Mar 18 20:30:59 2024 +08.