IIUM Repository

Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ751 Miscellaneous motors and engines. Including gas, gasoline, diesel"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Jump to: A | B | E | H | I | K | M | P | R | S | T
Number of items at this level: 18.

A

Abdullah, Nur Azam and Azami, Muhammad Hanafi (2021) Potensi industri getah dalam pembangunan teknologi aeroangkasa. Berita Harian, 19 April 2021. p. 12.

Ahmad, Farah and Kalam, M.A. and Zhang, Zhanying and Masjuki, Haji Hassan (2022) Sustainable production of furan-based oxygenated fuel additives from pentose-rich biomass residues. Energy Conversion and Management: X, 14 (100222). ISSN 2590-1745 (In Press)

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Comparison of diesel emission experiments in view of the environment: a case study at Dubai. International Journal of Management Science and Engineering Management, 7 (1). pp. 36-42. ISSN 1750-9653

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Potential for improving vehicle fuel efficiency and reducing the environmental pollution via fuel ionization. International Journal of Environmental Science and Technology , 9 (3). pp. 495-502. ISSN 1735-1472 (P), 1735-2630 (O)

B

Bashir, Musavir and Khan, Sher Afghan (2017) Investigation on the prominence of abrupt expansion on the base pressure of an axi-symmetric body. International Journal of Recent Research Aspects, 4 (4). pp. 59-63. ISSN 2349-7688

E

Elmoselhy, Salah A M and Faris, Waleed Fekry and Rakha, Hesham A. (2016) Experimentally validated analytical modeling of diesel engine power and in-cylinder gas speed dynamics. Journal of Mechanical Science and Technology, 30 (10). pp. 4725-4734. ISSN 1738-494X E-ISSN 1976-3824

H

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Putra, Azma and Musthafah, Mohd Tahir and Awang, Ardika Ridal (2016) Prediction on Power Produced from Power Turbine as a Waste Heat Recovery Mechanism on Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling and Simulation in Engineering, 2016. 5072404-1-5072404-12. ISSN 1687-5591 E-ISSN 1687-5605

Hoda, Asif and Rahman, Mohammad Tariqur and Asrar, Waqar and Khan, Sher Afghan (2021) A comparative study of natural gas and biogas combustion in a swirling flow gas turbine combustor. Combustion Science and Technology, 193 (4). pp. 1-29. ISSN 0010-2202 E-ISSN 1563-521X

I

Ihsan, Sany Izan (2021) Retrofitting electric vehicle: The IIUM journey achievements, challenges and moving forward. In: The First UNITED SAIG International Conference International Collaboration Towards Sustainable and Green Automotive Technology, 21-22 April 2021, Chulalongkorn University, Thailand.

K

Khan, Sher Afghan and Mohiuddin, M and Saleel, Ahmad C and G M, Fharukh (2019) Investigation of the effects of nozzle exit mach number and nozzle pressure ratio on axisymmetric flow through suddenly expanded nozzles. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3). pp. 570-578. E-ISSN 2249 – 8958

Kumar, K. Sunil and Kalos, Pritam Suryaprakash and Akhtar, Mohammad Nishat and Shaik, Saboor and Sundara, Vikram and Fayaz, H. and Khan, Sher Afghan and Asif, Mohammad (2023) Experimental and theoretical analysis of exhaust manifold by uncoated and coated ceramics (Al2O3, TiO2 and ZrO2). Case Studies in Thermal Engineering, 50. pp. 1-17. E-ISSN 2214-157X

M

Maleque, M. H. A. Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Hasan, Muhammad Hasibul (2015) Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research, 1115. pp. 207-2012. ISSN 1022-6680

Mohiuddin, A. K. M. (2012) The hybrid car with waste gas recovery. Research Report. s.n, Kuala Lumpur. (Unpublished)

P

Prashant, Jagadesh and Antony, Alappat Joseph and Khan, Sher Afghan (2020) Experimental investigation on the performance of single spark ignition and twin spark ignition engine fuelled with ethanol-gasoline blends. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 25-41. ISSN 2289-7879

R

Rahman, Mohammed Ataur and Rahman, Mizanur and Karim, Hafizzul (2017) The theory of the development of an electromagnetic engine for automotive use. International Journal of Advanced Robotics and Automation, 2 (1). pp. 1-8. ISSN 2473-3032 (In Press)

Raja, Vijayanandh and Gnanasekaran, Raj Kumar and Kaladgi, Abdul Razak and Rajendran, Parvathy and Khan, Sher Afghan and Asif, Mohammad (2022) Multi-disciplinary computational investigations on asymmetrical failure factors of disc brakes for various CFRP materials: a validated approach. Symmetry, 14 (8). pp. 1-45. ISSN 2073-8994

S

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ahmad, Meor iqram Meor (2021) Numerical investigation on the damage of whirling engine blades subjected to bird strike impact. Journal of Aeronautics, Astronautics and Aviation, 53 (2). pp. 193-199. ISSN 1990-7710

T

Thejaraju, Rajashekaraiah and Bettaiah, Girisha Kanuvanahalli and Rajendaran, Parvathy and Abbas, Muhammad Mujtaba and Khan, Sher Afghan and Saleel, Ahamad C. (2022) Numerical modelling and experimental validation of novel para winglet tape for heat transfer enhancement. Mathematics, 10 (2893). pp. 1-21. ISSN 2227-7390

This list was generated on Fri Oct 4 00:00:00 2024 +08.