Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ1125 Machine shops and machine shop practice"

A

Ahmad Shah Hizam, Md Yasir and Sukindar, Nor Aiman and Ahmad Afif, Abdul Rahman Putra and Yang, Chuan Choong and Kamaruddin, Shafie and Aziz, Azlan and Aminanda, Yulfian and Sulaiman, Mohd Hafis (2024) Effect of heat treatment on mechanical properties and dimensional accuracy of 3D-Printed black carbon fiber HTPLA. Heliyon, 10 (11). ISSN 2405-8440

Ahmed, Mirghani Ishak and Hrairi, Meftah (2012) Efficient cryogenic cooling during machining of rolled AISI 4340 steel. Advanced Materials Research, 576. pp. 123-126. ISSN 1022-6680

Alam, S. and Amin, A. K. M. Nurul and Konneh, Mohamed and Patwari, Anayet U. (2011) Surface roughness prediction in high speed flat end milling of Ti-6Al-4V and optimization by desirability function of RSM. Advanced Materials Research, 264-26. pp. 1166-1173. ISSN 1022-6680

Alao, A-R and Konneh, Mohamed (2009) A response surface methodology based approach to machining processes: modelling and quality of the models. International Journal Experimental Design and Process Optimisation (IJEDPO), Vol. 1 (2/3). 240- 261 . ISSN 2040-2252 (Print); 2040-2260 (Online)

Alao, Abdur-Rasheed and Konneh, Mohamed (2011) An experimental study on precision grinding of silicon using diamond grinding pins. International Journal Materials Engineering Innovation (IJMATEI), 2 (3-4). pp. 325-345. ISSN 1757-2754 E-ISSN 1757-2762

B

Bahar, Rubina and Yahya, Nur Adilah and Ariff, Tasnim Firdaus (2015) Design and development of a versatile ice clamping system. Advanced Materials Research, 1115. pp. 535-538. ISSN 1662-8985

I

Iqbal, Mohammad and Konneh, Mohamed and Md Said, Ahmad Yasir and Mohd Zaini, Azri Fadhlan (2014) Surface quality of high speed milling of silicon carbide by using diamond coated tool. Applied Mechanics and Materials, 446-44. pp. 275-278. ISSN 1660-9336

J

Jaafar, Israd Hakim and Shaik Dawood, Mohd. Sultan Ibrahim and Amin, A. K. M. Nurul and Shah, Qasim Hussain (2012) Modeling of a turning tool holder with finite elements and simulation of its free vibration frequencies. Advanced Materials Research, 576. pp. 659-664. ISSN 1022-6680

K

Kamaruddin, Shafie and Ridzuan, Arman Hilmi and Sukindar, Nor Aiman (2024) Optimisation of Surface Roughness in 3D Printing Using the Bees Algorithm. In: Intelligent Engineering Optimisation with the Bees Algorithm. Springer, pp. 197-207. ISBN 978-3-031-64935-6

Kamaruddin, Shafie and Rosdi, Mohamad Naqiuddin and Sukindar, Nor Aiman (2021) Optimization of drilling path using the bees algorithm. Manufacturing Technology, 21 (6). pp. 1-7. ISSN 1213–2489 E-ISSN 2787–9402 (In Press)

Kamaruddin, Shafie and Shamsulamri, Saiffaqrullah and Sharwazi, Muhammad Haziq Fakhri and Suhaimi, Muhammad Harith Ikhmal and Mohamad, Muhamad Ariff Othmani and Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani (2024) Product design and development strategies for an automated Printed Circuit Board (PCB) defects detection systems. International Journal on Computational Engineering (COMIEN), 1 (3). pp. 75-78. E-ISSN 3047-7999

Khan, Md. Ashikur Rahman and Rahman, M. M. and Kadirgama, Kumaran and Maleque, Md. Abdul and Ishak, M. (2011) Prediction of surface roughness of ti-6al-4v in electrical discharge machining: a regression model. Journal of Mechanical Engineering and Sciences (JMES), 1. pp. 16-24. ISSN 2231-8380

Konneh, Mohamed and Abdallah, Kassim Abdulrahman and Sudin, Izman and Jusoh, Mohd Amirudin (2015) Investigation of delamination at exit of drilled carbon fiber reinforced polymer (CFRP) composite with diamond coated ball nose drills. Advanced Materials Research, 1115. pp. 80-85. ISSN 1662-8985

Konneh, Mohamed and Iqbal, Mohammad and Ani, Hanfi and Yayah, Mohd Zulhari (2015) Influence of machining parameters on temperature when drilling carbon fiber reinforced polymer (CFRP) using coated diamond drills. Advanced Materials Research, 1115. pp. 74-79. ISSN 1662-8985

Konneh, Mohamed and Iqbal, Mohammad and Faiz , Nik Mohd Azwan (2012) Diamond coated end mills in machining silicon carbide. Advanced Materials Research, 576. pp. 531-534. ISSN 10226680

Konneh, Mohamed and Iqbal, Mohammad and Kasim, Md Asnawi and Mohd Isa, Nurbahiah (2012) High speed milling of silicon carbide with diamond coated end mills. Advanced Materials Research, 576. pp. 535-538. ISSN 1022-6680

Konneh, Mohamed and N. M. A., Rosli (2015) Experimental investigation of the effect of cutting tool coating on delamination during of milling Metal Matrix Composite (MMC). In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 20th-22th Sept. 2015, Johor Bahru, Johor. (Unpublished)

Konneh, Mohamed and Sudin, Izman and Abdullah, Kassim Abdulrahman (2014) Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills. In: International Conference on Innovative Trends in Multidisciplinary Academic Research (ITMAR 2014), 20th-21st October 2014, Istanbul, Turkey.

Konneh, Mohamed and Sudin, Izman and Padil, Mirza Emmil Dzahi and Roszat, Rosniza (2014) Surface roughness study of milled carbon fiber reinforced polymer (CFRP) composite using 4 mm 2-flute titanium aluminum nitride (TiAlN) coated carbide end mills. Advanced Materials Research, 887-88. pp. 1101-1106. ISSN 1022-6680

Konneh, Mohamed and Sudin, Izman and Sidek, Atiah Abdullah and Salleh, Muhammad Salahuddin (2015) Surface roughness in drilled carbon fiber reinforced polymer (CFRP)composite using diamond coated ball-nose drills. Advanced Materials Research, 1115. pp. 90-95. ISSN 1662-8985

Konneh, Mohamed and Tamsir, Afzeri and Triblas Adesta, Erry Yulian (2012) Development of an economical lapping process. Advanced Materials Research, 472-47. pp. 2348-2353. ISSN 1022-6680

Konneh, Mohamed and Zaini, Mohamad Hamzi (2015) Performance evaluation of drilling tools during machining plain Carbon Fiber Reinforced Polymer (CFRP). ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17386-17390. ISSN 1819-6608

M

Maleque, Md. Abdul and Sabur, Abdus and Moudood, Abdul and Ali, Mohammad Yeakub (2014) Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials, 465. pp. 1329-1333. ISSN 1660-9336

Mohamad Talhah Al Hafiz, Mohd Khata and Sukindar, Nor Aiman and Md Yasir, Ahmad Shah Hizam and Muhammad Fikri, Zawawi and Kamaruddin, Shafie and Ab Aziz, Ahmad Azlan (2024) Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using DLP 3D printing. Malaysian Journal of Microscopy, 20 (1). pp. 189-200. ISSN 1823-7010 E-ISSN 2600-7444

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) Analysis and modeling of surface roughness in powder mix EDM and pure EDM using central composite design. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 243-254. ISSN 2462-1943

S

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013, 28-29 August 2013, Hotel Equatorial , Malacca.

T

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Electronic smart ordering system: graphical user interface. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 59-64. ISBN 9789674181321

Topa, Ameen and Shah, Qasim Hussain (2014) Failure prediction in bulk metal forming process. International Journal of Manufacturing Engineering, 2014. ISSN http://www.hindawi.com/journals/ijme/