Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ181 Mechanical movements"

A

A. W. , Fatimatuzahraa and Baharuddin, Farahaina and Wan Yusoff, Wan Ahmad Yusmawiza (2011) The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), 25-28 September 2011, Langkawi, Malaysia. (Unpublished)

Abdalla, Mostafa M. and Reddy, Chevva Konda and Faris, Waleed Fekry and Gürdal, Zafer (2005) Optimal design of an electrostatically actuated microbeam for maximum pull-in voltage. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2003, 7th-10th April 2003, Norfolk, Virginia.

Abdullah, Kassim Abdulrahman and Nimir, Yassin Lutfi Mahmud (2013) Structural analysis of the frontal part of a local car model for crashworthiness. In: 24th IASTED International Conference on Modelling and Simulation, 17th-19th July 2013, Banff, Canada.

Abdullah, Nur Azam (2021) Adaptasi teknologi, persekitaran tingkat keberkesanan produk. Berita Harian, 17 April 2021. p. 12.

Abdullah, Nur Azam (2023) Aerofracturelastic: a study on the Interaction of crack and aeroelastic instability of aircraft and lifting surfaces. In: 4th ITB International Graduate School Conference (IGSC), 6 July 2023, Institut Teknologi Bandung, Indonesia. (Unpublished)

Abdullah, Nur Azam (2021) Energy-harvesting via wind interaction: a sustainable flight is a dream for the development of modern aircraft. @green, 1 (8). pp. 20-21. ISSN 2756-7818

Abdullah, Nur Azam (2024) Kajian pergolakan udara ekstrem dalam pesawat perlu berterusan. Berita Harian, MukaSepuluh (26hb Mei 2024). p. 10.

Abdullah, Nur Azam (2021) Pembangunan teknologi aeroangkasa bagi pertahanan nasional. In: Webinar Aviation, Aero Space and Space Awareness, Virtual. (Unpublished)

Abdullah, Nur Azam and Akbar, Mahesa and Wirawan, Nanda and Curiel-Sosa, Jose Luis (2019) Structural integrity assessment on cracked composites interaction with aeroelastic constraint by means of XFEM. Composite Structures. ISSN 0263-8223

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman (2021) Aerodynamic assessment and development of Smokey SAM Prototype (TRL-6). In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Ismail, Izham Izzat and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Abidin, Zulkifli Zainal and Abu Bakar, Ahmad Joahari and Dani, Noriza (2021) Flow behaviour assessment of Smokey SAM rocket prototype. CFD Letters, 13 (9). pp. 42-56. ISSN 2180-1363

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor Iqram Meor (2022) LCO flutter instability on oscillating supersonic wing by means of linearized aerodynamic small disturbance theory. In: Structural Integrity Cases in Mechanical and Civil Engineering. Structural Integrity, 23 (2). Springer Nature Switzerland AG, Switzerland, pp. 13-28. ISBN 978-3-030-85645-8

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor iqram Meor (2021) Limit Cycle Oscillation (LCO) flutter of advanced high modulus graphite/epoxy composite oscillating supersonic wing. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 8 - 9 March 2021, Pulau Pinang.

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor Iqram (2021) Numerical modelling of bird strike on aerospace structures by means of coupling FE-SPH. International Journal of Integrated Engineering, 13 (7). pp. 185-193. ISSN 2229-838X E-ISSN 2600-7916

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor iqram (2021) Computational modelling of bird strike impact on an aluminium alloy plate via coupling of FE-SPH. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 08-09 Mar 2021, Online.

Abid, Hasan M. and Shah, Qasim Hussain and Faris, Waleed Fekry (2011) The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 307-317. ISSN 1745-6444 (O), 1745-6436 (P)

Ahmad, Meor Iqram Meor and Sabri, Mohd Anas Mohd and Tahir, Mohd Faizal Mat and Abdullah, Nur Azam (2022) Predictive modelling of creep crack initiation and growth using Extended Finite Element Method (XFEM). Frattura ed Integrità Strutturale, 16 (61). pp. 119-129. ISSN 1971-8993 (In Press)

Ahmad, Salmiah and Tokhi, M. Osman and Siddique, Nazmul Haque (2010) Modular fuzzy control with input shaping technique for transformation of two-wheeled wheelchair to four-wheeled mode. In: 2010 IEEE Symposium Indsutrial Electronics & Applications (ISIEA), 3 - 5 Oct, 2010, Penang.

Ahmed, Hamdi E. and Ahmed, Mirghani Ishak and Yusoff, Mohd Zamri (2015) Heat transfer enhancement in a triangular duct using compound nanofluids and turbulators. Applied Thermal Engineering, 91. pp. 191-201. ISSN 1359-4311

Akhlaq, Adnan and Shaik Dawood, Mohd. Sultan Ibrahim and Jaffar Syed, Mohamed Ali and Sulaeman, Erwin (2023) A study on the effect of piezoelectric nonlinearity on the bending behaviour of smart laminated composite beam. Materials, 16 (7). pp. 1-19. E-ISSN 1996-1944

Akmeliawati, Rini and Raafat, Safanah M. (2011) Computational intelligence in robust control: a review. In: Computational intelligence in robust control: theory and applications. IIUM Press, Kuala Lumpur, pp. 1-27. ISBN 9789674181963

Al Amin, Md and Abdul-Rani, Ahmad Majdi and Danish, Mohd and Rubaiee, Saeed and Mahfouz, Abdullah and Thompson, Harvey M. and Ali, Sadaqat and Unune, Deepak Rajendra and Sulaiman, Mohd Hafis (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-EDM process: a review. Materials, 14 (13).

Al Jeroudi, Yazan and Legowo, Ari and Sulaeman, Erwin (2015) Smartphone based classification system for indoor navigation. Applied Mechanics and Materials, 775. pp. 436-440. ISSN 1660-9336

Albarody, Thar M. Badri and Al-Kayiem, Hussain H. and Faris, Waleed Fekry (2016) The transverse shear deformation behaviour of magneto-electro-elastic shell. Journal of Mechanical Science and Technology, 30 (1). pp. 77-87. ISSN 1738-494X E-ISSN 1976-3824

Altalmas, Tareq, M. and Aula, Abqori and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im (2013) Integrated design, modeling and analysis of a two-wheeled wheelchair for disabled. In: IIUM Research, Invention and Innovation Exhibition 2013, 19 - 20 February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Amanullah Tomal, Abu Naser Mohammad and Saleh, Tanveer and Khan, Md. Raisuddin (2018) Combination of fused deposition modelling with abrasive milling for attaining higher dimensional accuracy and better surface finish. IIUM Engineering Journal, 19 (2). pp. 221-231. ISSN 1511-788X E-ISSN 2289-7860

Aula, Abqori and Altalmas, Tareq M. and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im (2013) Integrated design, modelling and analysis of two-wheeled wheelchair for disabled. In: 16th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR’13), 14 – 17 July 2013, Sydney, Australia.

B

Ba Hamid, Alala M. and Makhdoomi, Mohatashem R. and Saleh, Tanveer and Bhuiyan, Moinul (2015) Development of a Shape Memory Alloy (SMA) based assistive hand. Advanced Materials Research, 1115. pp. 454-457. ISSN 1022-6680

Baharan, Mohd Redzuan bin and Aziz, Mohd Khairul Faiezi and Ahmad, Salmiah (2013) Development of automatic adjustment rear view mirror. In: IIUM Research, Invention and Innovation Exhibition 2013, 19 - 20 February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

C

Curiel-Sosa, J.L. and Tafazzolimoghaddam, Behrooz and Navarro-Zafra, Joaquin and Akbar, Mahesa and Abdullah, Nur Azam and Ahmad, Meor iqram Meor (2017) Modelling techniques for delamination and fracture of composites. In: 7th International Conference on Mechanics and Materials in Design,, 11th-15th June 2017, Albufeira, Portugal.

F

Faris, Waleed Fekry (2012) Contact-impact problems using a quasi-linear finite element approach. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 17-21. ISSN 1991-8178

Faris, Waleed Fekry and Abdel-Rahman, Eihab M. and Nayfeh, Ali H. (2002) Mechanical behavior of an electrostatically actuated micropump. In: 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 22nd-25th April 2002, Denver, Colorado.

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-1471 E-ISSN 1479-148X

G

Goher, Khalid and Ahmad, Salmiah and Tokhi, M. Osman (2010) A new configuration of two wheeled vehicles: towards a more workspace and motion flexibility. In: 2010 4th Annual IEEE Systems Conference, 5-8 Apr., 2010, San Diego, CA, USA.

H

Hamdani, Adib and Pankaj, Pankaj (2022) Numerical simulation of axially impacted elastic bar. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21-23 June 2021, Kuala Lumpur, Malaysia.

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Jailani, Mohd Noor (2015) Dynamic characterisation of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3-4). pp. 199-209. ISSN 1479-1471 E-ISSN 1479-148X

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Nor , Mohd Jailani (2014) Dynamic characterisation of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471. pp. 89-96. ISSN 1660-9336

Hanouf, Zahir and Faris, Waleed Fekry and Nor, Mohd Jailani Mohd (2014) Dynamic characterization of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471. pp. 89-96. ISSN 1662-7482

Hrairi, Meftah (2013) Development of a thermoelectrically air conditioned motorcycle helmet. Research Report. s.n, Kuala Lumpur. (Unpublished)

Hrairi, Meftah and Baharom, Badrul Hanafi (2013) Design and modelling of silicon MEMS accelerometer. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 181-187. ISSN 1755-9766

Husin, Hafiz and Mat Nawi, Mohd Nazir and Gebremariam, M A and Saptaji, Kushendarsyah and Azhari, Azmir (2024) Experimental investigation on the effect of masked multiple passes abrasive waterjet machining surface texturing on coefficient of friction. Journal of Advanced Research in Applied Mechanics, 126 (1). pp. 138-148. E-ISSN 2289-7895

I

Ideris, Muhammad Haziq and Kamaruddin, Shafie and Sulaiman, Mohd Hafis and Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani and Md Yasir, Ahmad Shah Hizam (2023) Effects of coating and lubrication on friction and wear for metal-to metal application. Journal of Advanced Research in Applied Mechanics, 110 (1). pp. 52-62. E-ISSN 2289-7895

K

Kamaruddin, Shafie and Rosdi, Mohamad Naqiuddin and Sukindar, Nor Aiman (2021) Optimization of drilling path using the bees algorithm. Manufacturing Technology, 21 (6). pp. 1-7. ISSN 1213–2489 E-ISSN 2787–9402 (In Press)

L

Loh, S. K. and Faris, Waleed Fekry and Hamdi, M. and Chin, W. M. (2011) Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5). pp. 1154-1168. ISSN 1674-7321 E-ISSN 1869-1900

M

M. Yusof, M. S. and Rafeeq, M. and Toha, Siti Fauziah (2023) Design and development of hovercraft amphibious robot locomotion for unmanned missions. Journal of Engineering and Technology, 14 (2). pp. 1-12. ISSN 2180-3811 E-ISSN 2289-814X

Mat Rosly, Muhammad Hadi and Sidek, Shahrul Na'im and Ahmad Puzi, Asmarani and Md. Yusof, Hazlina and Daud, Narimah and Mat Rosly, Maziah (2019) Clasp-knife model of muscle spasticity for simulation of robot-human interaction. IEEE Access, 7. pp. 1355-1364. E-ISSN 2169-3536

Md. Salleh, Salihatun and Tokhi, M. Osman and Toha, Siti Fauziah (2010) Artificial immune network model based controller for vibration suppression of flexible structures. In: IEEE World Congress on Computational Intelligence (WCCI 2010), 18-23 July 2010, Barcelona. Spain.

Mohamed Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2014) Improving efficiency and enhancing productivity in transporting fertilizers by using conveyor belt cleaners. Advanced Materials Research, 1082. pp. 505-510. ISSN 1022-6680

N

Noor Azam, Nor Afiqah and Ibrahim, Ahmad Imran and Abdul Rahman, Farah Diyana (2020) Dynamic analysis on rugby ball kicking parameters. Solid State Technology, 63 (2s). pp. 2893-2899. ISSN 0038-111X

Norsahperi, N.M.H. and Ahmad, Salmiah and Toha @ Tohara, Siti Fauziah and Abd Mutalib, Mohd Azri (2022) Design, simulation and experiment of PSO-FOPID controller for height position control of a scissor mechanism platform. FME Transactions, 50 (1). pp. 46-54. ISSN 1451-2092 E-ISSN 2406-128X

Norsahperi, Nor Mohd Haziq and Toha @ Tohara, Siti Fauziah and Ahmad, Salmiah and Mahmood, Iskandar Al Thani Bin (2021) Analysis and practical validation on a multi-linkage scissor platforms drive system for the satellite test facilities. International Journal of Heavy Vehicle Systems, 28 (1). pp. 1-14. ISSN 1744-232X E-ISSN 1741-5152

O

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 1st International Conference on Material Processing and Technology (ICMProTech 2021), Virtual.

Q

Qing, Arn Ng and Chiew, Yeong Shiong and Xin, Wang and Chee, Pin Tan and Mat Nor, Mohd Basri and Damanhuri, Nor Salwa and Chase, Geoffrey (2021) Network data acquisition and monitoring system for intensive care mechanical ventilation treatment. IEEE Access, 9. pp. 91859-91873. ISSN 2169-3536 E-ISSN 2169-3536

R

Ramli, Nabilah and Jamaluddin, Hishamuddin and Mansor, Shuhaimi B. and Faris, Waleed Fekry (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). pp. 59-71. ISSN 1745-6436 E-ISSN 1745-6444

Ridhuan Siradj , Fadly Jashi Darsivan and Wahyudi, Martono and Faris, Waleed Fekry and Ata, A.A (2007) Artificial neural network based vibration control of active engine mounting isolation system. In: 4th International Symposium on Mechatronics and its Applications (ISMA07), 26th-29th March 2007, Sharjah, U.A.E. (Unpublished)

S

Sahazubira, Muhammad Anas and Islam, Mazharul (2017) Analysis on vertical axis wind turbine using Qblabe. In: First Biannual Engineering Conference on Undergraduate Research (1st- BiECUR 2017), 17th Jan. 2017, Kuala Lumpur. (Unpublished)

Sahid, N.S.M. and Rahman, Md. Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2017) Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. International Journal of Automotive and Mechanical Engineering, 14 (1). pp. 3913-3926. ISSN 2229-8649 E-ISSN 2180-1606

Shafie, Amir Akramin (2011) Robot design: a case study of team learning experience and outcome. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 7-13. ISBN 9789674181529

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ahmad, Meor iqram Meor (2021) Numerical investigation on the damage of whirling engine blades subjected to bird strike impact. Journal of Aeronautics, Astronautics and Aviation, 53 (2). pp. 193-199. ISSN 1990-7710

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ismail, Ahmad Faris (2021) Numerical Modelling of Bird Strike on a Rotating Engine Blade Based on Variations of Porosity Density. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Sharuddin, Muhammad Hazman and Sulaiman, Mohd Hafis and Kamaruddin, Shafie and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda and Mohd Jamir, Mohd Ridzuan and Abdul-Rani, Ahmad Majdi (2023) Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (8). pp. 1647-1656. ISSN 1350-6501 E-ISSN 2041-305X

Suhaimi, Nur Shufinah and Ahmad, Meor Iqram Meor and Nuawi, Mohd Zaki and Ariffin, Ahmad Kamal and Abdullah, Nur Azam (2021) A review on modes of failure of rail tracks in railway transportation. In: 2nd Virtual Conference on Computational and Experimental Mechanics (VCCEM 21), 1-2 December 2021, Virtual Platform.

Sulaiman, Mohd Hafis (2020) Evaluation of lubricant performance in sheet metal forming. In: Webinar: Tribology as a basis in Condition Base Monitoring, 27th August 2020, Kuala Lumpur. (Unpublished)

Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Environmental-friendly tribological and lubrication in manufacturing processes. In: 4th International Conference on Sustainable Materials (e-ICoSM) 2020), 3rd September 2020, Pahang. (Unpublished)

Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Tribology of Composite Materials and Coatings in Manufacturing. In: Tribological Applications of Composite Materials. Springer, Singapore, pp. 283-308.

Sulaiman, Mohd Hafis and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Dahnel, Aishah Najiah and Kamaruddin, Shafie (2022) Friction and wear behaviours of hard-coated/uncoated bearing steels under nano-additive oil lubrication. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 - 30 September 2020, Langkawi, Malaysia.

Sulaiman, Mohd Hafis and R.N, Farahana and Mohd Jamir, Mohd Ridzuan and Mohammad Jaafar, Muhammad Hasnulhadi (2019) Manufacturing strategies and tribology of tailored tool surface topographies for enhanced lubrication in metal forming. In: 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP), 29 April 2019, Arau, Perlis.

Syed Abdullah, Syed Idrus Bin and Iannucci, Lorenzo and Greenhalgh, Emily S and Abdullah, Nur Azam (2022) The delamination behaviour of Vectran/Epoxy composites having a novel non-crimp fabric architecture. Composites Part B: Engineering, 228 (109413). pp. 1-12. ISSN 1359-8368 E-ISSN 1879-1069

syed Abu Bakar, Syed Noh and Abdalla, Mostafa M. and Faris, Waleed Fekry and Ihsan, Sany Izan (2012) Axisymmetric vibration analysis of isotropic circular plate with attached annular piezoceramic plate. International Journal of Vehicle Noise and Vibration, 8 (4). pp. 302-317. ISSN 1479-148X (O), 1479-1471 (P)

T

Toha, Siti Fauziah and Haja Mohideen, Mohammad Zafran (2011) An intelligent car surveillance system: design and tools selection. In: Mechatronic book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 179-184. ISBN 9789674181765

W

Waleed Fekry, Faris (2012) Vibro-Acoustic Analysis of Automotive Vehicles. Research Report. s.n. (Unpublished)

Wan Jusoh, Wan Ahmad Izuddin and Mohd Razib, Mohd Asyraf and Md Nor, Khairul Affendy and Zainal Abidin, Zulkifli (2024) Design and optimization of motion control for autonomous scrubber robot. In: 9ᵗʰ INTERNATIONAL CONFERENCE ON MECHATRONICS ENGINEERING (ICOM’24), 13-14 August 2024, Gombak.