IIUM Repository

An experimental study on steel and Teflon squeeze film dampers

Asad A., Khalid and Abdulgani M., Albagul and Waleed Fekry, Faris and Godem A., Ismail (2006) An experimental study on steel and Teflon squeeze film dampers. Shock and Vibration, 13 (1). pp. 33-40. ISSN 1070-9622

[img] PDF
Restricted to Repository staff only

Download (147kB) | Request a copy

Abstract

In this paper, the vibration analysis on Teflon and steel squeeze film dampers has been carried out. At different frequency ranges, vibration amplitude and the resonance frequency are measured. The eccentricity ratio at resonance speed has been determined. Results show that the vibration amplitude of the steel damper is 10% less at resonance compared with the Teflon damper. On the other hand, saving weight of 36% has been achieved by using the Teflon damper. A rotor bearing system for vibration analysis has been designed and fabricated. The test rig consists of mild steel shaft with two supports, oil pressure gauge system and two self-alignment ball bearings fixed on each end support. Two squeeze film dampers are used at each of the rotor support ends. Teflon and steel squeeze film dampers (SFD) were fabricated and tested using turning machine. © 2006 - IOS Press and the authors. All rights reserved.

Item Type: Article (Journal)
Additional Information: 4694/30876
Uncontrolled Keywords: Bearings; Squeeze film dampers; Vibration
Subjects: T Technology > TJ Mechanical engineering and machinery
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering > Department of Mechanical Engineering
Depositing User: Prof.Dr. Waleed Fekry Faris
Date Deposited: 04 Aug 2013 12:32
Last Modified: 04 Aug 2013 12:32
URI: http://irep.iium.edu.my/id/eprint/30876

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year