IIUM Repository (IREP)

Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ170 Mechanics applied to machinery. Dynamics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Jump to: A | B | D | E | F | G | H | I | K | M | N | P | R | S | T | U | W
Number of items at this level: 45.

A

Ahmad, Salmiah and Siddique, Nazmul H. and Tokhi, M. Osman (2014) Modelling and simulation of double-link scenario in a two-wheeled wheelchair. Integrated Computer-Aided Engineering, 21 (2). pp. 119-132. ISSN 1069-2509

Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. Australian Journal of Basic and Applied Sciences, 8 (15 ). pp. 18-24. ISSN 1991-8178

Aibinu, Abiodun Musa and Syed Mohammad, Sharifah Nadiah and Wan Azmi, Wan Nur Faezah (2011) Review of Malaysian traffic summon and payment system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 351-359. ISBN 9789674181765

Ali , Mohammad Yeakub and Abd. Rahman, Mohamed and Banu, Asfana and Adnan, Shakira and Nadia, Fatin (2016) High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014), 23rd-25th Nov. 2014, Cameron Highland, Pahang.

Azmi, Mohd Hafizi and Affendy, Muhammad R. and Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa (2011) Development of an intelligent laundry system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 194-202. ISBN 9789674181765

B

Baali, Hamza and Salami, Momoh Jimoh Eyiomika and Akmeliawati, Rini (2011) Kernel PCA – an introduction. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 292-296. ISBN 9789674181765

BenLahcene, Zohir and Hasbullah, Faried and Faris, Waleed Fekry (2014) A comparative ride performance of passive, semi-active and active suspension systems for off-road vehicles using half car model. International Journal of Heavy Vehicle Systems (IJHVS), 21 (1). pp. 26-41. ISSN 1741-5152 (O), 1744-232X (P)

D

Darsivan, Fadly Jashi and Faris, Waleed Fekry and Martono, Wahyudi (2008) Active engine mounting controller using extended minimal resource allocating networks. International Journal of Vehicle Noise and Vibration, 4 (2). pp. 150-168. ISSN 1479-148X (O),1479-1471 (P)

E

El-Hafidi, Ali and Martin , Bruno and Faris, Waleed Fekry and Lay, Béatrice (2011) A study of noise transmission through cylindrical shell using modal truncation approach. International Journal of Vehicle Noise and Vibration, 7 (3). pp. 271-284. ISSN 1479-148X (O), 1479-1471 (P)

F

FB, Sayyad and B., Kumar and Khan, Sher Afghan (2013) Approximate analytical method for damage detection in free–free beam by measurement of axial vibrations. International Journal of Damage Mechanics, 22 (1). pp. 133-142. ISSN 1530-7921

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2010) Assessment of different semi-active control strategies on the performance of off-road vehicle suspension systems. International Journal of Vehicle Systems Modelling and Testing , 5 (2-3). pp. 254-271. ISSN 1745-6444

Faris, Waleed Fekry and Saad, Fazidah (2010) Dynamic characterisation of elastomeric engine mounts of different geometry used in automotive industry: simulation approach. International Journal of Vehicle Noise and Vibration, 6 (1). pp. 1-39. ISSN 1479-148X (O), 1479-1471 (P)

G

Goher, Khalid and Ahmad, Salmiah and Tokhi, M. Osman (2010) A new configuration of two wheeled vehicles: towards a more workspace and motion flexibility. In: 2010 4th Annual IEEE Systems Conference, 5-8 Apr., 2010, San Diego, CA, USA.

H

Hanouf, Zahir (2011) Modal analysis of car panels using finite element analysis. In: Regional Engineering Postgraduate Conference (EPC 2011), 4th-5th October 2011, Bangi, Selangor.

Hanouf, Zahir and Mohd. Nor, Mohd. Jailani and Faris, Waleed Fekry (2007) Engine noise: An overview on current research trends. In: Conference on Advances in Noise, Vibration and Comfort (NVC) 2007, 27th-28th November 2007, Putra Jaya , Malaysia.

Hanouf, Zahir Ahmad and Faris, Waleed Fekry (2009) Investigation into noise problems in vehicle structure using vibro-acoustic approach. International Journal of Vehicle Noise and Vibration, 5 (3). pp. 238-260. ISSN 1479-148X (O), 1479-1471 (P)

Hasbullah, Faried and Faris, Waleed Fekry (2010) An evaluation of LQR and fuzzy logic controllers for active suspension using half car model. International Journal of Vehicle Noise and Vibration, 6 (2/3/4). pp. 200-214. ISSN 1479-148X (O), 1479-1471 (P)

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Samsul Bahrim, Nur’atiyah Najwa and Aini Nurrasyidah, Azhar and Mohd Shahar, Siti Fatimah (2014) Development of design structure matrix of product architecture case study: multi purpose CNC router. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Hrairi, Meftah and Ali, Arafath and Rizk, Abd El-Fattah (2012) Analysis of thermal stress intensity factors for edge cracked bimaterial system. Advanced Materials Research, 576. pp. 766-769. ISSN 1022-6680

Hrairi, Meftah and Mohammad, Masturah and Ismail, Siti Maisara (2012) Monitoring of fatigue damage using ultrasonics and finite element analysis. Advanced Materials Research, 576. pp. 655-658. ISSN 1022-6680

Hussain Shah, Qasim (2011) Experimental and numerical study on the orthogonal and oblique impact on water filled pipes. International Journal of Impact Engineering, 38. pp. 330-338. ISSN 0734-743X

Hussain Shah, Qasim (2009) Impact resistance of a rectangular polycarbonate armor plate subjected to single and multiple impacts. International Journal of Impact Engineering, 36. pp. 1128-1135. ISSN 0734-743X

Hussain Shah, Qasim and Hasan, Hasan Abid (2012) LS-DYNA for beginners: an insight into Ls-Prepost and Ls-Dyna. LAP LAMBERT Academic Publishing, Saarbrucken Germany. ISBN 9783846556771 / 3846556777

Hussain Shah, Qasim and Mujahid, Mohammad and Al-Atabi, Mushtak and Abakrb, Yousif A. (2011) Load carrying capability of liquid filled cylindrical shell structures under axial compression. Journal of Engineering Science and Technology , 6 (4). pp. 516-526. ISSN 1823-4690

I

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2007) Dynamics and control policies analysis of semi-active suspension systems using a full-car model. International Journal of Vehicle Noise & Vibration, 3 (4). pp. 370-405. ISSN 1479-148X

K

Kashif, Syed Muhammad (2012) Hot Water Rocket System (HWRS) - preliminary design and prototype development of a pressurized how water casing (PHWC). Research Report. s.n, Kuala Lumpur. (Unpublished)

M

Mridha, Shahjahan (2012) Effect of cryogenic cooling on the micro structure and properties of ferritic stainless steel welds. Research Report. s.n. (Unpublished)

N

Nasry, Nasrul Ashraf and Mahmud, Khairus Syakirah and Hilmy, Irfan and M. I., Ismail and Hassan Basri, Rodziah (2017) Implementation of lean manufacturing to blend with good manufacturing practice at Minda Tulus Industries Sdn. Bhd. for improved performance. In: 3rd National Conference on Knowledge Transfer (NCKT'16), 30th Nov.-1st Dec. 2016, Pulau Pinang.

Nurdin, Irwan and Yaacob, Iskandar Idris and Johan, Mohd. Rafie (2016) Enhancement of thermal conductivity and kinematic viscosity in magnetically controllable maghemite (γ-Fe2O3) nanofluids. Experiment Thermal and Fluid Science, 77. pp. 265-271. ISSN 0894-1777

P

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration, 4-6 January 2009, Cairo, Egypt.

R

Rahman, M. A. and Aziz, M. A. and Ruhul, A.M. and Rashid, Muhammad Mahbubur (2017) Biodiesel production process optimization from spirulina maxima microalgae and performance. Journal of Mechanical Science and Technology, 31 (6). pp. 3025-3033. ISSN 1738-494X

Ramli, Nabilah and Jamaluddin, Hishamuddin and Mansor, Shuhaimi and Faris, Waleed Fekry (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). pp. 59-71. ISSN 1745-6444 (O), 1745-6436 (P)

Rashid, Muhammad Mahbubur and Hussain, Mohamed Azlan and Abd Rahim, Nasrudin and Salami, Momoh Jimoh Emiyoka (2009) Development of fuzzy logic controller for magnetorheological rotary brake system. International Journal of Mechanical and Materials Engineering (IJMME), 4 (3). pp. 232-238. ISSN 1823-0334

Rashid, Muhammad Mahbubur and Salami, Momoh Jimoh Emiyoka and Khan, Md. Raisuddin and Rahman, Md. Mozasser (2011) Development of vibration suppression devices from smart fluids. Advanced Materials Research, 264-65. 548 -553 . ISSN 1022-6680

Rotinwa-Akinbile, M. A. and Aibinu, Abiodun Musa and Salami, Momoh Jimoh Eyiomika (2011) Development of palmprint based biometric system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 203-212. ISBN 9789674181765

S

Shah, Qasim Hussain and Abakrb, Yousif A. (2007) A comparison of energy absorbing capabilities of paper and steel structures subjected to progressive failure under free falling objects. Journal of Engineering Science and Technology , 2 (2). pp. 200-210. ISSN 1823-4690

Shah, Qasim Hussain and Abdullah, Kassim (2011) Evaluation of friction welded bi-material joint strength subjected to impact loads. Advanced Materials Research, 264. pp. 719-725. ISSN 1662-8985

Shah, Qasim Hussain and Hamdani, Adib (2013) The damage of unconfined granite edge due to the impact of varying stiffness projectiles. International Journal of Impact Engineering, 59. pp. 11-17. ISSN 0734-743X

Shah, Qasim Hussain and Naily, Hanis and Ramly, Nur Syuhada (2012) Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 174-180. ISSN 1755-9766

Syed, Syed Ashfaq and Khan, Sher Afghan (2013) Sonic Under Expanded Flow Control With Micro Jets. International Journal of Engineering Research and Application, 3 (6). pp. 1482-1488. ISSN 2248-9622

Syed, Syed Ashfaq and Khan, Sher Afghan and E., Rathakrishnan (2013) Control of suddenly expanded flow for area ratio 3.61. International Journal of Advanced Scientific and Technical Research (IJAST, 6 (3). pp. 1-11. ISSN 2249-9954

T

Toha, Siti Fauziah and Tokhi, M. Osman (2011) System identification technique for a helicopter using genetic algorithms. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 304-310. ISBN 9789674181765

Toha, Siti Fauziah and Tokhi, M. Osman (2011) System modelling of a twin rotor system: time and frequency domain analysis. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 297-303. ISBN 9789674181765

U

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Nithe, N. A. and Rony, J. I. (2016) Performance and cost analysis of diesel engine with different mixing ratio of raw vegetable oil and diesel fuel. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

W

Wahab, M. Abdel and Hilmy, Irfan and Hafiz, Tauqeer and Talemi, R. Hojjati (2012) Finite element modelling of damage fracture and fretting fatigue. In: 15th International Conference on Applied Mechanics & Mechanical Engineering, 29-31 May 2012, Cairo, Egypt.

This list was generated on Tue Dec 12 21:54:36 2017 +08.