Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ227 Machine design and drawing"

A

Ab Rahim, Abdul Hakim and Ramli, Nabilah and Nordin, Anis Nurashikin and Othman, Raihan and Asrar, Waqar and Sulaeman, Erwin (2018) Classical equivalent circuit characterization for a double-layer capacitor. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017, 28th-30th November 2017, Putrajaya.

Abdul Razak, Amir and Abdul Majid, Zafri Azran and Basrawi, Firdaus and Sharol, Ahmad Fadzil and Ruslan, Mohd Hafidz and Sopian, Kamaruzaman (2019) A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. Solar Energy, 178. pp. 314-330. ISSN 0038-092X

Abdullah, Kassim Abdulrahman and Wild, P M and Jeswiet, J J and Ghasempoor, A (2001) Tensile testing for weld deformation properties in similar gage tailor welded blanks using the rule of mixtures. Journal of Materials Processing Technology, 112. pp. 91-97. ISSN 0924-0136

Abdullah, Nur Azam (2021) Adaptasi teknologi, persekitaran tingkat keberkesanan produk. Berita Harian, 17 April 2021. p. 12.

Abdullah, Nur Azam (2023) Aerofracturelastic: a study on the Interaction of crack and aeroelastic instability of aircraft and lifting surfaces. In: 4th ITB International Graduate School Conference (IGSC), 6 July 2023, Institut Teknologi Bandung, Indonesia. (Unpublished)

Abdullah, Nur Azam (2020) Medium-altitude long-endurance (MALE) UAV: worth buying or developing a new one? AirForce Digest, 13. pp. 34-37. ISSN 2289-327X

Abdullah, Nur Azam (2021) Pembangunan teknologi aeroangkasa bagi pertahanan nasional. In: Webinar Aviation, Aero Space and Space Awareness, Virtual. (Unpublished)

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman (2021) Aerodynamic assessment and development of Smokey SAM Prototype (TRL-6). In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Abdullah, Nur Azam and Mohamed Afandi, Mohamed Azizul (2021) Selami sains aerodinamik dalam sukan berbasikal. Berita Harian, 16 February 2021. p. 11.

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor iqram Meor (2021) Limit Cycle Oscillation (LCO) flutter of advanced high modulus graphite/epoxy composite oscillating supersonic wing. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 8 - 9 March 2021, Pulau Pinang.

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor Iqram (2021) Numerical modelling of bird strike on aerospace structures by means of coupling FE-SPH. International Journal of Integrated Engineering, 13 (7). pp. 185-193. ISSN 2229-838X E-ISSN 2600-7916

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor iqram (2021) Computational modelling of bird strike impact on an aluminium alloy plate via coupling of FE-SPH. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 08-09 Mar 2021, Online.

Ahmad, Meor Iqram Meor and Akbar, Mahesa and Abdullah, Nur Azam (2022) Development of constitutive creep damage-based modified Robinson-Rousselier (MRR) model with XFEM for void-crack relation in ductile materials. Mechanics of Time-Dependent Materials, 25 (4). ISSN 1385-2000 E-ISSN 1573-2738

Ahmad, Meor Iqram Meor and Sabri, Mohd Anas Mohd and Tahir, Mohd Faizal Mat and Abdullah, Nur Azam (2022) Predictive modelling of creep crack initiation and growth using Extended Finite Element Method (XFEM). Frattura ed Integrità Strutturale, 16 (61). pp. 119-129. ISSN 1971-8993 (In Press)

Ajala, Mosud Taiwo and Khan, Md. Raisuddin and Shafie, Amir Akramin and Salami, Momoh Jimoh-Eyiomioka and Oladokun, Majeed Olaide and Maizirwan, Mel and Mohamad Nor, Mohamad Iskandar (2022) Design and development of a carbon dioxide gas generator for firefighting robot application. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), Online Conference, Kuala Lumpur, Malaysia.

B

Badran, Marwan A. and Khan, Md. Raisuddin and Toha, Siti Fauziah and Zainal Abidin, Zulkifli (2015) Collaboration in multi-robot systems. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17225-17231. ISSN 1819-6608

Billah, Md. Masum and Khan, Md. Raisuddin and Shafie, Amir Akramin (2013) Experimental investigation of snake robot locomotion in planar space. In: 2013 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2013), 22nd-25th September 2013, Kuching, Sarawak.

C

Che Mohd Noh, Mohd Ihsan and Mohamed, Mohd Ambri and Ismail, Ahmad Ghadafi and Ani, Mohd Hanafi and Majlis, Burhanuddin Yeop (2019) Improvement of gas barrier properties of Polyethylene Terephtalate (PET) by Graphene Nanoplatelets (GNP). In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Clapham, Lynann and Abdullah, Kassim Abdulrahman and Jeswiet, J J and Wild, P M and Rogge, R (2004) Neutron diffraction residual stress mapping in same gauge and differential gauge tailor-welded blanks. Journal of Materials Processing Technology, 148. pp. 177-185. ISSN 0924-0136

D

Dabhade, Ameya and Pathan, Khizar Ahmed and Khan, Sher Afghan and Jadhav, Akash (2020) Design and development of chassis for formula student vehicle. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (10). pp. 1121-1130. ISSN 0976-6480 E-ISSN 0976-6499

F

Faris, Waleed Fekry and Al-Omari, Yasir and Sapian, Abdul Razak and Husin, Muhammad (2011) A new concept design of a motorbike with 3D model for the Malaysian market. Journal of Design Research, 9 (1). pp. 16-43. ISSN 1569-1551

H

Hameed, Shihab Ahmed and Redha, N. and Sh. Ahmed, Mohammed and Sh. Ahmed, Ahmed (2017) M-Healthcare to facilitate self-management of chronic back pain. Journal of Scientific and Engineering Research, 4 (12). pp. 363-368. ISSN 2394-2630

Hanouf, Zahir and Abdelrahman, Ahmed and Ahmad, Kartini (2022) An investigation on structural dynamic modification of a machine casing. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21-23 June 2021, Kuala Lumpur, Malaysia.

K

Kamaruddin, Shafie and Abd Latif, Mohd Arif Hafizi (2019) Application of the bees algorithm for constrained mechanical design optimisation problem. International Journal of Engineering Materials and Manufacture, 4 (1). pp. 27-32. E-ISSN 0128-1852

Khalifa, Othman Omran and Densibali , Amirasyid and Faris, Waleed Fekry (2006) Image processing for chatter identification in machining processes. International Journal of Advanced Manufacturing Technology, 31. pp. 443-449. ISSN 1433-3015 (O); 0268-3768 (P)

Khan, Md. Ashikur Rahman and Rahman, M. M. and Kadirgama, Kumaran and Maleque, Md. Abdul and Ishak, M. (2011) Prediction of surface roughness of ti-6al-4v in electrical discharge machining: a regression model. Journal of Mechanical Engineering and Sciences (JMES), 1. pp. 16-24. ISSN 2231-8380

M

Mohamed Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2014) Improving efficiency and enhancing productivity in transporting fertilizers by using conveyor belt cleaners. Advanced Materials Research, 1082. pp. 505-510. ISSN 1022-6680

Mohd Sajali, Muhammad Fahmi and Aabid, Abdul and Khan, Sher Afghan and Mehaboobali, Fharukh Ahmed Ghasi and Sulaeman, Erwin (2019) Numerical investigation of flow field of a non-circular cylinder. CFD Letters, 11 (5). pp. 37-49. ISSN 2180-1363

N

Nimir, Yassin Lutfi Mahmud and Abdullah, Kassim Abdulrahman and Lon, Wong Lek (2014) Assessment of crashworthiness of the frontal part of a local car model. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 352-362. ISSN 1745-6444 (O), 1745-6436 (P)

O

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 3rd International Conference on Green Engineering & Technology 2021 (IConGETech), 4th February 2021, Virtual conference. (Unpublished)

P

Prabowo, Herry Agung and Adesta, Erry Yulian Triblas (2019) A study of Total Productive Maintenance (TPM) and lean manufacturing tools and their impact on manufacturing performance. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 39-43. ISSN 2277-3878

S

Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Buckling analysis of a thin-walled C-section channel under mechanical and thermal load. Journal of Advanced Research in Applied Mechanics, 109 (1). pp. 1-16. E-ISSN 2289-7895

Shah, Qasim Hussain and Azram, Mohammad and Iliyas, M. H. (2005) Predicting the crack initiation fracture toughness for a crack along the bimaterial interface. Journal of Applied Sciences, 5 (2). pp. 253-256. ISSN 1812-5654

Shah, Qasim Hussain and Homma, H. and Iliyas, M. H. and Ismail, Ahmad Faris (2005) The effect of material property gradient on the fracture toughness of a PMMA/PC bimaterial with a crack normal to the interface. Journal of Applied Sciences, 5 (3). pp. 476-481. ISSN 1812-5654

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ismail, Ahmad Faris (2021) Numerical Modelling of Bird Strike on a Rotating Engine Blade Based on Variations of Porosity Density. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Topa, Ameen and Ismail, Ahmad Faris (2022) Numerical modelling of bird strike on a rotating engine blades based on variations of porosity density. IIUM Engineering Journal, 23 (1). pp. 412-423. ISSN 1511-788X E-ISSN 2289-7860

Sukindar, Nor Aiman and Idrus Saidi, Haidah Farzana Isma and Kamaruddin, Shafie and Yang, Chuan Choong and Syed Shaharuddin, Sharifah Imihezri and Morni, Murhamdilah (2023) Design simulation and development of prototype filling nozzle in food industry. In: 8th Brunei International Conference on Engineering and Technology 2021, 08 – 10 November 2021, Virtual.

Syed Abdullah, Syed Idrus Bin and Iannucci, Lorenzo and Greenhalgh, Emily S and Abdullah, Nur Azam (2022) The delamination behaviour of Vectran/Epoxy composites having a novel non-crimp fabric architecture. Composites Part B: Engineering, 228 (109413). pp. 1-12. ISSN 1359-8368 E-ISSN 1879-1069

T

Tahoun, Ahmed and Kafafy, Raed and Jawamir, Karam and Mohammed Aldheeb, Mohammed Abdulmalek and Khalil, Abdul Mushawwir (2016) apparatus and method to remotely control fluid flow in tubular strings and wellbore annulus. US9453388B2.

Y

Yosri, Muhammad Hafizan and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati (2019) Evaluation of air flow pattern for conceptual design of automotive painting line using Computational Fluid Dynamic (CFD) for better dust particle reduction. CFD Letters, 11 (2). pp. 42-49. ISSN 2180-1363

Z

Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2023) Study on the lateral torsional buckling of composite thin-walled beam. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET 2021), 8th - 10th November 2021, Bandar Seri Begawan, Brunei Darussalam (Virtual).