Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2011
 | Up a level |
Article
Faris Fekry, Waleed and Daoud, Jamal Ibrahim (2011) Review on solution methods for random vibration problems. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 355-359. ISSN 1991-8178
Mokhtar, Hanan and Sicot, Olivier and Rousseau, Jérôme and Aminanda, Yulfian and Aivazzadeh, Shahram (2011) The influence of ageing on the impact damage of carbon epoxy composites. Procedia Engineering, 10. pp. 2615-2620. ISSN 1877-7058
Abd Halim, Nor Farah Huda and , Afzeri and Aminanda, Yulfian (2011) Experimental study of cutting parameter for drilling on fabric carbon/epoxy composite laminates. Advanced Materials Research, 311. pp. 240-243. ISSN 1662-8985
Abd. Rahman, Mohamed and Salit, Mohd. Sapuan and Abdan, Khalina (2011) Effects of process parameters on selected properties of liquid compression-molded vinyl ester sheets. Pertanika Journal of Science and Technology, 19 (1). pp. 137-142. ISSN 0128-7680
Abid, Hasan M. and Shah, Qasim Hussain and Faris, Waleed Fekry (2011) The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 307-317. ISSN 1745-6444 (O), 1745-6436 (P)
Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2011) Waste cooking oil transesterification: influence of impeller type, temperature, speed and bottom clearance on FAME yield. African Journal of Biotechnology, 10 (44). pp. 8914-8929. ISSN 1684–5315
Altaf, Afaq and Omar, Ashraf Ali E. and Asrar, Waqar (2011) Study of the reverse delta wing. Journal of Aircraft, 48 (1). pp. 277-286. ISSN 0021-8669
Aminanda, Yulfian and Edy Sutjipto, Agus Geter and Adesta, Erry Yulian Triblas and Castanie, Bruno (2011) Simulation of compression and spring back phenomena of sandwich structure with honeycomb core subjected to low energy and low velocity impact. Key Engineering Materials, 462-63. pp. 1296-1301. ISSN 1662-9795
Aminanda, Yulfian and Hamid, Wan Luqman Hakim (2011) Experimental study of energy absorption capability of metallic-palm fiber-metallic hybrid composite plate. Advanced Material Research, 311-13. pp. 68-71. ISSN 1662-8985
BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan (2011) Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 219-231. ISSN 1745-6444 (O), 1745-6436 (P)
Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Ismail, Ahmad Faris and Rahman, M. M. and Momani, Shaher Mohammad (2011) Exact solution for linear and nonlinear systems of PDEs by homotopy-perturbation method. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 3295-3305. ISSN 1991-8178
Echrif, Salah B. M. and Hrairi, Meftah (2011) Process simulation and quality evaluation of incremental sheet forming. IIUM Engineering Journal, 12 (3). pp. 185-196. ISSN 1511-788X
Echrif, Salah B. M. and Hrairi, Meftah (2011) Research and progress in incremental sheet forming processes. Materials and Manufacturing Processes, 26. pp. 1404-1414. ISSN 1532-2475 (O), 1042-6914 (P)
Edy Sutjipto, Agus Geter and Triwiyanto, A and Aminanda, Yulfian and Fekry Faris, Waleed and Adesta, Erry Yulian Triblas (2011) Visual inspection on premature failure of electric motor bearings. Applied Mechanics and Materials, 84-85. pp. 557-561. ISSN 1660-9336
El-Hafidi, Ali and Martin , Bruno and Faris, Waleed Fekry and Lay, Béatrice (2011) A study of noise transmission through cylindrical shell using modal truncation approach. International Journal of Vehicle Noise and Vibration, 7 (3). pp. 271-284. ISSN 1479-148X (O), 1479-1471 (P)
Elsayed, Omer Ali and Omar, Ashraf Ali E. and Asrar, Waqar and Kwon, Kijung (2011) Effect of differential spoiler settings (DSS) on the wake vortices of a wing at high-lift-configuration (HLC). Aerospace Science and Technology, 15 (7). pp. 555-566. ISSN 1270-9638
Faris, Waleed Fekry and Al-Omari, Yasir and Sapian, Abdul Razak and Husin, Muhammad (2011) A new concept design of a motorbike with 3D model for the Malaysian market. Journal of Design Research, 9 (1). pp. 16-43. ISSN 1569-1551
Faris, Waleed Fekry and Daoud, Jamal Ibrahim and Sutjipto, Agus Geter Edy (2011) Random vibrations of a beam on elastic foundation. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 456-460. ISSN 1991-8178
Faris, Waleed Fekry and Rakha, Hesham and Kafafy, Raed Ismail and Mohammed Idres, Moumen and Elmoselhy, Salah (2011) Vehicle fuel consumption and emission modelling: an in-depth literature review. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 318-392. ISSN 1745-6444 (O), 1745-6436 (P)
Hossain, Altab and Rahman, Mohammed Ataur and Hossen, Jakir and Iqbal, Parvez and M.I., Zahirul (2011) Prediction of aerodynamic characteristics of an aircraft model with and without winglet using fuzzy logic technique. Aerospace Science and Technology, 15 (8). pp. 595-605. ISSN 1270-9638
Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Fuzzy evaluation for an intelligent air-cushion tracked vehicle performance investigation. Journal of Terramechanics. ISSN 0022-4898
Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle. International Journal of Automotive Technology, 12 (5). pp. 745-753. ISSN 1229-9138 (Print), 1976-3832 (Online)
Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Nonlinear controller of an air-cushion system for a swamp terrain vehicle: fuzzy logic approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225. pp. 721-734. ISSN 0954-4070
Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. World Academy of Science, Engineering and Technology, 75. pp. 50-57. ISSN 2010-376X
Hrairi, Meftah and Chtourou, Hedi and Gakwaya, Augustin and Guillot, Michel (2011) Modeling the powder compaction process using the finite element method and inverse optimization. The International Journal of Advanced Manufacturing Technology, 56 (5-8). pp. 631-647. ISSN 0268-3768
Hussain Shah, Qasim (2011) Experimental and numerical study on the orthogonal and oblique impact on water filled pipes. International Journal of Impact Engineering, 38. pp. 330-338. ISSN 0734-743X
Hussain Shah, Qasim and Mujahid, Mohammad and Al-Atabi, Mushtak and Abakrb, Yousif A. (2011) Load carrying capability of liquid filled cylindrical shell structures under axial compression. Journal of Engineering Science and Technology , 6 (4). pp. 516-526. ISSN 1823-4690
Islam, Mazharul and Fartaj, Amir and Carriveau, Rupp (2011) Design analysis of a smaller-capacity straight-bladed VAWT with an asymmetric airfoil. International Journal of Sustainable Energy, 30 (3). pp. 179-192. ISSN 1478-6451 E-ISSN 1478-646X
Kafafy, Raed and Hameed, Ammar (2011) Modeling of non-uniform thermoelement devices subject to lateral heat convection. Defect and Diffusion Forum, 312. pp. 782-787. ISSN 1012-0386
Loh, S.K. and Faris, Waleed Fekry and Chin, W. M. (2011) Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5). pp. 1154-1168. ISSN 1674-7321 (print), 1869-1900 (online)
Mohamed Rehan, Muhammad Saifuddin and Rousseau, Jerome and Xiao-Jing, Gong and Guillaumat, Laurent and Mohamed Ali, Jaafar Syed (2011) Effects of fiber orientation of adjacent plies on the mode I crack propagation in a carbon-epoxy laminates. Procedia Social and Behavioral Sciences, 10. pp. 3179-3184. ISSN 1877-0428
Mohammad Abdelrahman, Mohammad Ibraheem and Chang, Insu and Park, Sang-Young (2011) Magnetic torque attitude control of a satellite using the state-dependent Riccati equation technique. International Journal of Non-Linear Mechanics, 46 (5). pp. 758-771. ISSN 0020-7462
Mohammad Abdelrahman, Mohammad Ibraheem and Park, Sang-Young (2011) Integrated attitude determination and control system via magnetic measurements and actuation. Acta Astronautica, 69 (3-4). pp. 168-185. ISSN 0094-5765
Mohammad Abdelrahman, Mohammad Ibraheem and Park, Sang-Young (2011) Sigma-point Kalman filtering for spacecraft attitude and rate estimation using magnetometer measurements. IEEE Transactions on Aerospace and Electronic Systems, 47 (2). pp. 1401-1415. ISSN 0018-9251
Mohammad Abdelrahman, Mohammad Ibraheem and Park, Sang-Young (2011) Simultaneous spacecraft attitude and orbit estimation using magnetic field vector measurements. Aerospace Science and Technology, 15 (8). pp. 653-669. ISSN 1270-9638
Mohammed Idres, Moumen and Kafafy, Raed and Faris, Waleed Fekry (2011) Air supply system transient model for proton exchange membrane fuel cell. International Journal of Vehicle systems Modelling and Testing, 6 (3/4). pp. 396-407. ISSN 1745-6436
Mohiuddin, A. K. M. (2011) Investigation of the Swirl Effect on Engine Using Designed Swirl Adapter. IIUM Engineering Journal, 12 (3). pp. 201-209. ISSN 1511-788X
Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Arfah, A, and Farraen, M.A. (2011) Possible solution to smoothen the nature of the torque curve of the CAMPRO engine. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 202-218. ISSN 1745-6444 (O), 1745-6436 (P)
Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Haw Shin, Yap (2011) Application of Multi-objective Genetic Algorithm (MOGA) for design optimization of valve timing at various engine speeds. Advanced Materials Research, 265. pp. 1719-1724. ISSN 1022-6680
Nabeel Adedapo, Adeyemi and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2011) Biodiesel production: a mini review. International Energy Journal (IEJ), 12 (1). pp. 15-27. ISSN 1513-718X
Omar, Ashraf Ali E. and Kurban, Adel (2011) Design, fabrication and experimental testing of IIUM free wing unmanned aerial vehicle (IIUM-FWUAV). Australian Journal of Basic and Applied Sciences, 5 (6). pp. 381-389. ISSN 1991-8178
Omar, Hanafy and Idres, Moumen and Kafafy, Raed (2011) Particle swarm optimization of micro air launch vehicle trajectory. Canadian Aeronautics and Space Journal, 57 (2). pp. 115-120. ISSN 1712-7998 (O)
Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2011) Influence of chip serration frequency on chatter formation during end milling of Ti6Al4V. Journal of Manufacturing Science and Engineering, 133 (1). 011013-1. ISSN 1087-1357
Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and S., Farahain (2011) Chip serration frequency-the primary cause of chatter during end milling operation. Advanced Materials Research, 264-26. pp. 1174-1179. ISSN 1022-6680
Rahman, Mohammed Ataur (2011) Development of a model of of energy efficient hybrid engine towards green technology. International Journal of Electric and Hybrid Vehicles, 3 (2). pp. 138-151. ISSN 1751-4096 (O), 1751-4088 (P)
Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Ismail, Ahmad Faris and Yahya, Azmi (2011) Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS), 18 (3). pp. 227-244. ISSN 1741-5152 (O), 1744-232X (P)
Rashmi, W. and Ismail, Ahmad Faris and Sopyan, Iis and Jameel, Ahmed Tariq and Yusof, Faridah and Khalid, M. and Mubarak, N. M. (2011) Stability and thermal conductivity enhancement of Carbon nanotube (CNT) nanofluid using gum Arabic. Journal of Experimental Nanoscience, 6 (6). pp. 567-579. ISSN 1745-8099
Shah, Qasim Hussain and Abdullah, Kassim (2011) Evaluation of friction welded bi-material joint strength subjected to impact loads. Advanced Materials Research, 264. pp. 719-725. ISSN 1662-8985
Walvekar , Rashmi Gangasa and Ismail, Ahmad Faris and Mohamed, Khalid and Yusof, Faridah (2011) CFD studies on natural convection heat transfer of Al2O3-water nanofluids. Heat Mass Transfer, 47 (10). pp. 1301-1310. ISSN 1432-1181 (O), 0947-7411 (P)
Yusof, Faridah and Salawudeen, T. Olalekan and Shah, Qasim Hussain and Al-Khatib, Ma'an Fahmi Rashid and Muyibi, Suleyman Aremu (2011) Chemical resistance tests on PP-ternary nanocomposite for its application in bioreactor liner fabrication. Science China Technological Sciences, 54 (8). pp. 2217-2223. ISSN 1869-1900 (O), 1674-7321 (P)
Book
Hrairi, Meftah, ed. (2011) Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur. ISBN 978-967-418-174-1
Mohiuddin, A. K. M. and Hoda, Asif , eds. (2011) Alternative energy. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, 0-1. ISBN 9789674181581
Mohiuddin, A. K. M., ed. (2011) Engine and auxiliary systems. IIUM Press, International Islamic University Malaysia, Kuala Lumpur. ISBN 978-967-418-216-8
Sulaeman, Erwin, ed. (2011) Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181451
Asrar, Waqar (2011) The IIUM low speed wind tunnel: a historical perspective. University Archives Publication Series (2). IIUM Press, Kuala Lumpur. ISBN 9789674180263
Ihsan, Sany Izan (2011) Semiactive control policies : ride analysis for passenger vehicles. LAP LAMBERT Academic Publishing, Saarbrucken, Germany. ISBN 978-3-8443-8417-8
Mohammad Abdelrahman, Mohammad Ibraheem (2011) Space vehicles dynamics and control. IIUM Press, Kuala Lumpur. ISBN 9789674180492
Rahman, Mohammed Ataur and Afroz, Rafia (2011) Advanced theory of peat vehicle mobility. VDM Verleg, Germany. ISBN 9783639304329
Shuriye, Abdi Omar and Ismail, Ahmad Faris (2011) Qur'anic values & engineering studies: approaches and methods in the process of Islamizing engineering curriculum. Pearson Malaysia Sdn. Bhd., Petaling Jaya, Selangor. ISBN 9789673490721 / 9673490724
Book Chapter
Abakrb, Yousif A. and Ismail, Ahmad Faris and Ahmed, Mirghani Ishak (2011) Experimental investigation of a multistage evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 197-202. ISBN 9789674181581
Abdullah, Kassim Abdulrahman and Wan Sulaiman, Nur Hidayah (2011) Buckling and crush analysis of light weight structure. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, pp. 48-53. ISBN 9789674181741
Abdullah, Kassim Abdulrahman and Cheah , Siew Loong (2011) Design and fabrication of the testing model of the vehicle structure test system. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, pp. 196-201. ISBN 9789674181741
Abdullah, Kassim Abdulrahman and Roslan, Zahra (2011) Analysis of lightweight structural tubes for crashworthy car body. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 54-60. ISBN 9789674181741
Abdullah, Kassim Abdulrahman and Rosli, Mohd Zaimi (2011) Design analysis of laminated composite ladder chassis frame of light truck. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, pp. 202-207. ISBN 9789674181741
Adam, Daud and Ismail, Ahmad Faris and Mohd. Salleh, Hamzah (2011) Design and development of a lab scale bioreactor for heat inducible enzyme expression system. In: Current research and development in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 211-218. ISBN 9789674181444
Ahmed, Mirghani I. and Abakar, Y.A and Pervez, T. and Ismail, Ahmad Faris (2011) Design and analysis of a solar still using finite element method. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 79-89. ISBN 9789670225685
Ahmed, Mirghani Ishak and Abakrb, Yousif A. and Ismail, Ahmad Faris (2011) Developments on solar operated water desalination. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 163-168. ISBN 9789674181582
Ahmed, Mirghani Ishak and Hrairi, Meftah (2011) Thermal analysis of a micro device used for detection of colorectal cancer. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 220-228. ISBN 9789674181581
Ahmed, Mirghani Ishak and Ismail, Ahmad Faris and Abakrb, Yousif A. (2011) Modelling of electronics heat sink – influence of the wake function generation on the accuracy of CFD analysis. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 203-212. ISBN 9789674181581
Al-Zuhair, Sulaiman and Abakrb, Yousif A. and Ahmed, Mirghani Ishak (2011) The effect of the operating conditions on the apparent viscosity of crude palm oil during separation. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 213-219. ISBN 9789674181581
Ameer Amsa, Mohamad Ghazali and Ismail, Ahmad Faris (2011) Contribution of Lofti Asker Zadeh to fuzzy logic. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 121-126. ISBN 978-967-418-157-4
Aminanda, Yulfian and Abdullah, Nor Fazilah and Abdul Rahman, Noor Izzah (2011) Experimental study of indentation on composite structure. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 86-92. ISBN 978-967-418-148-2
Aminanda, Yulfian and Esa, Mir Amirul Shah and Said Mohamed, Said Hamadi (2011) Fabrication and testing of IIUM aircraft fuselage structure made of composite laminate material. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 8-15. ISBN 978-967-418-148-2
Aminanda, Yulfian and Idzwein, Muhammad and Najib, Najwan (2011) Design and fabrication of fuselage model for laboratory purpose. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 16-23. ISBN 978-967-418-148-2
Aminanda, Yulfian and Idzwein, Muhammad and Najib, Najwan (2011) Simulation of fuselage model for laboratory purpose. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 24-29. ISBN 978-967-418-148-2
Aminanda, Yulfian and Ismail, N. (2011) Composite failure mechanism of corrugated hybrid composite subjected to bending loading. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 70-78. ISBN 978-967-418-148-2
Aminanda, Yulfian and Ismail, N. (2011) Determination of mechanical properties of corrugated hybrid composite. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 63-69. ISBN 978-967-418-148-2
Aminanda, Yulfian and Mohd Akmal, Nur Dalila (2011) Study of energy absorption of foam-filled honeycomb structure. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 79-85. ISBN 978-967-418-148-2
El-Awad, M.M. and Ahmed, Mirghani Ishak (2011) Theoretical and experimental evaluation of LPG as refrigerant for domestic refrigerators and freezers. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 169-178. ISBN 9789674181581
Faris, Waleed Fekry and Khalifa, Othman Omran and Hawari, Muaz (2011) E-waste : problems, Islamic perspective and solutions. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 112-124. ISBN 9789670225821
Hassan, Sayed Desouky and Faris, Waleed Fekry and Kafafy, Raed (2011) Towards an Islamic theory of development based on Qur'anic approach : Surah Quraish as a case study. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 46-54. ISBN 9789670225821
Hawlader, Mohammad Nurul Alam (2011) Desalination of seawater to provide fresh water. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 9-15. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam (2011) Engineering design: an approach to the development creativity. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 132-139. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam (2011) The Impact of energy utilization on environment. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 1-8. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and J. Chowdhury, Md. Shafique (2011) Moisture migration in a grain column subjected to drying. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 30-37. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Jahangeer, K. A. and Shaochun, Ye and Choy, Tack Hoon (2011) A solar heat-pump system for air-conditioning, water heating and drying. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 126-131. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Jiahe, Pan (2011) Drying under inert environment: the quality of Mango and Rockmelon. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 47-59. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Lee, Hwee Peng (2011) Solar drying of guavas, papayas and apples. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 38-46. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Lee, Poh Seng and Chua, Kok Kiang (2011) Performance of different photovoltaic cells operating under the meteorological conditions of Singapore. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 229-239. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Leong , Chiing Yang (2011) A solar assisted desalination system using heat pump. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 16-29. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Rahman, S. M. A. and Jahangeer, K. A. (2011) Optimization and economic analysis of a solar assisted heat pump drying system. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 103-116. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Shaochun, Ye (2011) Optimization of an integrated solar heat-pump system. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 60-68. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Smita, Panga (2011) An experimental study of a phase change storage system. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 23-29. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Ullah, M. Zakir (2011) A solar heat pump water heater for rural hospitals. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 117-125. ISBN 9789674181581
Hawlader, Mohammad Nurul Alam and Ullah, MD. Zakir and Than Htut, Maung (2011) A low temperature flat plate solar collector. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 53-59. ISBN 9789674181581
Hoda, Asif (2011) Direct numerical simulation (DNS) and large eddy simulation (LES). In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 177-181. ISBN 978-967-418-216-8
Hoda, Asif (2011) Film cooling of turbine blades. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 192-196. ISBN 978-967-418-216-8
Hoda, Asif (2011) Numerical simulation of complex turbulent flows. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 172-176. ISBN 978-967-418-216-8
Hoda, Asif (2011) Reynolds averaged navier stokes (RANS) simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 182-191. ISBN 978-967-418-216-8
Hrairi, Meftah (2011) General framework for inverse identification of consecutive parameters. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 177-182. ISBN 9789674181741
Hrairi, Meftah (2011) Inverse parameter identification of elastic and inelastic constitutive material models. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 183-188. ISBN 9789674181741
Hrairi, Meftah and Chtourou, Hedi (2011) Finite element modeling of the powder compaction process. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 203-252. ISBN 978-967-418-020-1
Hrairi, Meftah and Echrif, Salah B. M. (2011) Enhancing magnetic particle testing of automotive parts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 189-195. ISBN 9789674181741
Hrairi, Meftah and Hussin, Asmu' (2011) Numerical simulation of green compacts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 161-166. ISBN 978-967-418-174-1
Hrairi, Meftah and Hussin, Asmu'i and Mohamad Ravi, Fadzly (2011) Overview of the powder metallurgy process. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 151-155. ISBN 9789674181741
Hrairi, Meftah and Jamil, Fatimah (2011) Study of spot welding process. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 172-176. ISBN 9789674181741
Hrairi, Meftah and Mohamad Ravi, Fadzly (2011) Mechanical properties of sintered aluminum alloy compacts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 156-160. ISBN 978-967-418-174-1
Hrairi, Meftah and Nawi, Saiful Mazwan (2011) Experimental studies of dieless forming. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 167-171. ISBN 9789674181741
Hrairi, Meftah and Rizal, Mohd Shah and Echrif, Salah B. M. (2011) Development of automatic magnetic particle system for automotive parts inspection. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 160-165. ISBN 978-967-418-216-8
Hrairi, Meftah and Rizal, Mohd Shah and Echrif, Salah B. M. (2011) Performance of an automatic magnetic particle inspection of automotive parts. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 166-171. ISBN 978-967-418-216-8
Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Experimental results of liquid slosh in a cylindrical tank with different fill levels. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 226-233. ISBN 9789674181741
Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Experimental study of liquid slosh dynamics in a half filled cylindrical tank. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 220-225. ISBN 9789674181741
Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Liquid sloshing. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 215-219. ISBN 9789674181741
Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Numerical and experimental results of liquid slosh in a partially filled cylindrical tank. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 242-245. ISBN 9789674181741
Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Simulation model of 3D liquid slosh in a partially filled cylindrical tank. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 233-237. ISBN 9789674181741
Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Simulation results of liquid slosh in a partially filled cylindrical tank. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 238-241. ISBN 9789674181741
Idres, Moumen (2011) Compressor models. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 34-39. ISBN 9789674181451
Idres, Moumen (2011) Introduction to compressors. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 4-8. ISBN 9789674181451
Idres, Moumen (2011) Modeling of compression systems. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 27-33. ISBN 9789674181451
Idres, Moumen (2011) Rotating stall and surge. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 20-26. ISBN 9789674181451
Idres, Moumen (2011) Surge and rotating stall. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 40-47. ISBN 9789674181451
Idres, Moumen (2011) Three-dimensional analysis of compressors. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 15-19. ISBN 9789674181451
Idres, Moumen (2011) Two-dimensional analysis of compressors. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 9-14. ISBN 9789674181451
Idres, Moumen (2011) Unstructured finite volume for two-dimensional navier stokes equations. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 43-98. ISBN 978-967-418-020-1
Idres, Moumen and Kafafy, Raed Ismail (2011) Design of an autopilot for an autonomous unmanned aerial vehicle. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 59-68. ISBN 9789670225685
Ihsan, Sany Izan and Farid, Khairussani and Mel, Maizirwan and Mohiuddin, A. K. M. (2011) Analysis of engine performance with enhanced fuel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 147-155. ISBN 9789674181581
Ihsan, Sany Izan and Sulaiman , Nabila and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with NGV. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 140-146. ISBN 9789674181581
Ismail, Ahmad Faris and Ahmed, Mirghani Ishak and Abakrb, Yousif A. (2011) CFD analysis of an evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 156-162. ISBN 9789674181581
Ismail, Ahmad Faris and Mahmood, Iskandar Al-Thani and Pervez, Tasneem (2011) Automation of pump test rig system. In: Mechatronics book series: Selected papers from ICOM '01, ICOM '05, and ICOM '08. IIUM Press, Kuala Lumpur, pp. 3-16. ISBN 9789670225685
Ismail, Ahmad Faris and Walvekar , Rashmi Gangasa (2011) Application of nanofluids as coolants in radiator. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 1-13. ISBN 9789670225876
Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Tensile and impact properties enhancement of crosslinked high density polythlene and ethylene propylene diene monomer nanocomposites via electron beam irradiation. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 62-81. ISBN 9789670225876
Kafafy, Raed (2011) Immersed finite element method (IFEM). In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 295-346. ISBN 978-967-418-020-1
Khalid, Asad A. and Ismail, Ahmad Faris and A.K.M., Nurul Amin (2011) Finite element study of composite cones under axial compression loading. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 69-78. ISBN 9789670225685
Larbani, Moussa and Ismail, Ahmad Faris (2011) The invention of the helium-neon gas laser by Ali Javan. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 160-164. ISBN 978-967-418-157-4
Legowo, Ari (2011) Aircraft equations of motion: a linear model. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 63-70. ISBN 9789674181451
Legowo, Ari (2011) Aircraft equations of motion: a non linear model. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 57-62. ISBN 9789674181451
Legowo, Ari (2011) Aircraft rigid-body equation of motions: a non linear model. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 49-56. ISBN 9789674181451
Liu, Baomin and Hawlader, Mohammad Nurul Alam (2011) Analyses of motion and drag coefficient of water droplets in a natural draught cooling tower. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 240-251. ISBN 9789674181581
Mohd. Amin, Zakaria and Hawlader, Mohammad Nurul Alam and Karim, Azharul (2011) A solar assisted heat pump system for desalination. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 252-261. ISBN 9789674181581
Mohiuddin, A. K. M. (2011) 2nd generation IIUM buggy car – Part I: design. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 42-47. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) 2nd generation IIUM buggy car – part II: fabrication. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 48-59. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) Development of low cost catalytic converter from non-precious metals. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 123-130. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) Exhaust system optimization using GT- Power. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 21-28. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) Experimental analysis and comparison of performance characteristics of catalytic converters. In: Engine and auxiliary system. IIUM Press, Kuala Lumpur, pp. 1-7. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) Experimental analysis and simulation of catalytic converters. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 8-13. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) Experimental analysis to determine the relationship between noise and back pressure for muffler design – Part I: Muffler design requirements. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 29-35. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) Experimental analysis to determine the relationship between noise and back pressure for muffler design – Part II: Experimental results. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 36-41. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) Investigation of engine performance using designed swirl adapter. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 67-73. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. (2011) Solar energy management for poverty alleviation and income generating activities. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 91-96. ISBN 9789674181581
Mohiuddin, A. K. M. (2011) Thermal design of mechanical devices using expert system. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 14-20. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Alternative mixing strategy for biodiesel production: mixed flow impeller characterization. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 188-196. ISBN 9789674181581
Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Flow characteristic of mixing impeller for liquid-liquid mixing. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 85-90. ISBN 9789674181581
Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Preliminary investigation of biodiesel reactor optimization using combine CFD-Taguchi method. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 179-187. ISBN 9789674181581
Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Waste cooking oil utilization for biodiesel production. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 79-84. ISBN 9789674181581
Mohiuddin, A. K. M. and Adeyemi, Nabeel A. and Husaini, Muhamad (2011) Turbulence model for axial mixing impeller in unbaffled vessel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 97-102. ISBN 9789674181581
Mohiuddin, A. K. M. and Faiz, Ali (2011) Comparison of various types of powertrain used in automotive vehicles in terms of performance and emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Ihsan, Sany Izan and Abd Murat, Noor Azammi (2011) A study of an aftermarket voltage stabilizer for its performance and emission on passengers vehicle. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 60-66. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Mohammed Zayan, Jalal (2011) Automotive catalytic converters : current status and some future perspectives. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 80-85. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of combustion characteristics using Jatropha oil methyl esters biodiesel and diesel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 262-268. ISBN 9789674181581
Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of emission characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative Energy. IIUM Press, Kuala Lumpur, pp. 74-78. ISBN 9789674181581
Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of performance characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 69-73. ISBN 9789674181581
Mohiuddin, A. K. M. and Mohd Sood, Anwar (2011) 3-Cylinder gasoline direct injection as opposed to 4-cylinder multi-port fuel injection for lower fuel consumption and NOX emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 86-91. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2011) Investigation of spark ignition multipoint engine using water addition - Part II: performance and emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 101-108. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2011) Investigation of spark ignition multipoint engine using water addition - part I : simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 92-100. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Yap, Haw Shin (2011) Robust design optimization of valve timing using multi-objective genetic algorithm (MOGA). In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 53-59. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Zahari, Izzarief and Aiman, Abdullah (2011) Thermodynamic analysis of combustion of CAMPRO CFE engine – part I: simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 109-115. ISBN 978-967-418-216-8
Mohiuddin, A. K. M. and Zahari, Izzarief and Aiman, Abdullah (2011) Thermodynamic analysis of combustion of CAMPRO CFE engine – part II: combustion analysis. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 116-122. ISBN 978-967-418-216-8
Nimir, Yassin Lutfi Mahmud (2011) Comparison between composites reinforced with natural and synthetic fibers : Part I. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 143-150. ISBN 978-967-418-216-8
Nimir, Yassin Lutfi Mahmud (2011) Comparison between composites reinforced with natural fibres and synthetic fibres Part II. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 151-155. ISBN 978-967-418-216-8
Nimir, Yassin Lutfi Mahmud (2011) Production of aluminium reinforced with SiC particulates using powder metallurgy. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 156-159. ISBN 978-967-418-216-8
Nimir, Yassin Lutfi Mahmud (2011) Production of aluminum-silicon carbide composites using powder metallurgy at sintering temperatures above the aluminum melting point part II. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 138-142. ISBN 978-967-418-216-8
Omar, Ashraf Ali (2011) Lower-Upper Symmetric-Gauss-Seidal (LU-SGS) algorithm for pseudo compressibility method. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 347-388. ISBN 978-967-180-020-1
Rahman, Mohammed Ataur (2011) Performance investigation of energy efficient hybrid engine towards green technology. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 131-137. ISBN 978-967-418-216-8
Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and -, Irwan and -, Azoa and -, Adly (2011) Design and development of an automatic car door opening and locking system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 48-52. ISBN 9789670225685
Rahman, S. M. A. and Hawlader, Mohammad Nurul Alam (2011) Performance of evaporator collector and air collector in a solar assisted heat pump dryer. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 269-282. ISBN 9789674181581
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Damage assessment of liquid filled container subjected to free fall on rigid steel plate. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 127-133. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Damage of polycarbonate armor plate subjected to impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 106-111. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Energy absorbing capability of materials subjected to impact under gravity loading. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 120-126. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Experimental results of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 71-76. ISBN 978-967-418-174-1
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Experimental setup of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 66-70. ISBN 978-967-418-174-1
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Failure mechanism of PC armor plates with PMMA sacrificial layer subjected to impact. In: Advanced Topics inMmechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 93-105. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Finite element to predict damage of a polycarbonate armor plate subjected to impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 112-119. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Numerical analysis on materials energy absorbing capability under gravity loading impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 134-140. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Numerical assessment of liquid filled container subjected to free fall on rigid steel plate. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 141-147. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 61-65. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation results of pipe whip impact at 55° angle. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 82-86. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation results of pipe whip impact at 90° angle. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 87-92. ISBN 9789674181741
Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation setup of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 77-81. ISBN 9789674181741
Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Cylindrical shell buckling under axial compression load. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 3-7. ISBN 9789674181741
Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental and simulation results of cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 41-47. ISBN 9789674181741
Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 13-17. ISBN 9789674181741
Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling for 50mm stroke. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 18-23. ISBN 9789674181741
Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling for 60mm stroke. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 24-29. ISBN 9789674181741
Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental setup of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 8-12. ISBN 9789674181741
Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Simulation results of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 35-40. ISBN 9789674181741
Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Simulation setup of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 30-34. ISBN 9789674181741
Sulaeman, Erwin (2011) Accurate geometric stiffness matrix formulation of beam finite element. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 190-197. ISBN ISBN 978-967-418-148-2
Sulaeman, Erwin (2011) Aeroelastic stability problem of air vehicle. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 187-194. ISBN 9789674181451
Sulaeman, Erwin (2011) Alternate approximate function for kernel function of planar oscillating lifting surfaces. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 146-151. ISBN 9789674181451
Sulaeman, Erwin (2011) Alternate expansion series for the incomplete cylindrical function. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 135-139. ISBN 9789674181451
Sulaeman, Erwin (2011) Analytical derivation of the incomplete cylindrical functions: imaginary part. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 130-134. ISBN 9789674181451
Sulaeman, Erwin (2011) Analytical derivation of the incomplete cylindrical functions: real parts. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 123-130. ISBN 9789674181451
Sulaeman, Erwin (2011) Application of the aerodynamic discrete element methods. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 180-186. ISBN 9789674181451
Sulaeman, Erwin (2011) Axial stiffness matrix of non-uniform Bernoulli-Euler bar element. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 233-239. ISBN ISBN 978-967-418-148-2
Sulaeman, Erwin (2011) Expansion series of continuous function using analytical integration of least square regression. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 140-145. ISBN 9789674181451
Sulaeman, Erwin (2011) Formulation of kernel function for aerodynamic loading on air vehicle. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 105-110. ISBN 9789674181451
Sulaeman, Erwin (2011) Improved doublet lattice method. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 176-179. ISBN 9789674181451
Sulaeman, Erwin (2011) Improved doublet point method. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 168-175. ISBN 9789674181451
Sulaeman, Erwin (2011) Improved vortex lattice method. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 162-167. ISBN 9789674181451
Sulaeman, Erwin (2011) Minimum denominator of rational function. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 88-93. ISBN 9789674181451
Sulaeman, Erwin (2011) Numerical evaluations of hypergeometric cylindrical functions. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 117-122. ISBN 9789674181451
Sulaeman, Erwin (2011) Overview of dynamics of flexible air vehicle. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 76-82. ISBN 9789674181451
Sulaeman, Erwin (2011) Torsional stiffness matrix of non-prismatic beam elements. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 94-98. ISBN 9789674181451
Sulaeman, Erwin (2011) Translation of axis procedure to construct stiffness matrix. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 83-87. ISBN 9789674181451
Sulaeman, Erwin (2011) Unsteady aerodynamic theory of lifting surface. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 111-116. ISBN 9789674181451
Syed Mohamed Ali, Jaffar and Jamaludin, Nur Faizlin and Roslan, Rosfarisya and Abdul Rahman, Mohammad (2011) Buckling of composite columns. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 107-116. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Wan Abdullah, Wan Najihah and Aminuddin, Alina (2011) Buckling of composite perforated plates. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 117-124. ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) Characterization of composite materials using full field data. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 131-136. ISBN ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) Finite element model updating. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 240-245. ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) Introduction of piecewise virtual fields method for solution of inverse problems. In: Advanced Numerical Technologies in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 253-294. ISBN 978-967-180-020-1
Syed Muhammad, Kashif (2011) Numerical construction of piecewise virtual fields. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 215-220. ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) Numerical model of noise effect in full field data. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 221-226. ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) Optimized virtual fields with noise minimization. In: Advances in Aircraft Structures. International Islamic University Malaysia Press, Kuala Lumpur, Malaysia, pp. 227-232. ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) The constitutive equation gap method. In: Advances in Aircraft Structures. International Islamic University Malaysia Press, Kuala Lumpur, Malaysia, pp. 198-201. ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) The equilibrium gap method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 202-205. ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) The reciprocity gap method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 206-209. ISBN 978-967-418-148-2
Syed Muhammad, Kashif (2011) The virtual fields method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 210-214. ISBN 978-967-418-148-2
Ushama, Imama Karim Manba and Shafie, Amir Akramin (2011) Al-Jazari on automata. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 165-170. ISBN 978-967-418-157-4
Yap, Wen Jiun and Asrar, Waqar and Mawlood, Mahmood Khalid (2011) Higher-order compact finite difference schemes. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 99-156. ISBN 978-967-418-020-1
Proceeding Paper
, Pharmayeni and Akmeliawati, Rini and Legowo, Ari (2011) Development of nonlinear energy-based method (NEM) controller for 3 DOF helicopter. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.
Abas, Norafizah and Legowo, Ari and Akmeliawati, Rini (2011) Parameter identification of an autonomous quadrotor. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.
Abdelrahman, Mohammad and Hassanein, Atef (2011) Aerodynamics of airfoil sections and their influence on wind turbine design and performance. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE’11), 17-19 May 2011, Kuala Lumpur, Malaysia.
Abdelrahman, Mohammad and Hassanein, Atef (2011) New airfoil families for horizontal-axis wind turbines. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE’11), 17-19 May 2011, 17-19 May 2011, Kuala Lumpur, Malaysia.
Abid, Hasan M. and Shah, Qasim Hussain and Faris, Waleed Fekry (2011) The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)
Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Abd Aziz, Abd Rashid and F., Firmansyah and Anbese, Yohannes Tamirat (2011) Analysis of mixing in stirred vessels using CFD: waste cooking oil transesterification. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Legend Hotel, Kuala Lumpur.
Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2011) Waste cooking oil transesterification: influence of impeller type, speed and bottom clearance on fame yield. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.
Aibinu, Abiodun Musa and Salami, Momoh Jimoh Eyiomika and Najeeb, Athaur Rahman and Azeez, J. F. and Rajin, S. M. Ataul Karim (2011) Evaluating the effect of voice activity detection in isolated Yoruba Word Recognition System. In: 4th International Conference on Mechatronics (ICOM), 17-19 May, 2011, Kuala Lumpur.
Aldheeb, M and Kafafy, Raed and Idres, Moumen and Omar, H. (2011) Particle swarm optimization of air-launch vehicle and trajectory. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia. (Unpublished)
Altaf, Afaq and Omar, Ashraf Ali E. and Asrar, Waqar and Ludin@Jamaluddin, Hani (2011) Investigation of the vortical flow around a reverse delta wing. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011 (ICMAAE11) , 17-19 May 2011, Legend Hotel, Kuala Lumpur .
Amin, Zakaria Mohd. and Hawlader, Mohammad Nurul Alam and Karim, Azharul (2011) A solar assisted heat pump system for desalination. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE '11), 17-19 May 2011, Kuala Lumpur.
Andan, Amelda Dianne and Asrar, Waqar and Omar, Ashraf Ali (2011) Estimation of aerodynamic parameters of IIUM hybrid airship. In: International Conference on Mechanical, Automotive and Aerospace Engineering , 17-19 May, 2011, Kuala Lumpur.
Andan, Amelda Dianne and Asrar, Waqar and Omar, Ashraf Ali E. (2011) Aerodynamics of a hybrid airship. In: 4th International Meeting of Advances in Thermofluids (IMATT 2011), 3-4th October 2011, Hotel Avillion Legacy, Melaka.
BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan (2011) Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia.
Elfagi, Abdulhafid M. and Ahmed Omer, Elhassen Ali and Asrar, Waqar and Omar, Ashraf Ali (2011) Highly accurate compact flowfield dependent variation method for solving two-dimensional navier-stokes equations. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011, 17-19 May, 2011, Kuala Lumpur.
Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2011) Improving the efficiency of micronozzle by heated sidewalls. In: 4th International Meeting of Advances in Thermofluids (IMATT 2011), 3-4th October 2011, Hotel Avillion Legacy, Melaka.
Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2011) Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May 2011, Kuala Lumpur. (Unpublished)
Hamood, Mostafa A. and Akmeliawati, Rini and Legowo, Ari (2011) Multiple-surface sliding mode control for 3DOF helicopter. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May 2011, Kuala Lumpur, Malaysia.
Hawlader, M N A and Amin, Zakaria Mohd (2011) A desalination system utilizing solar ambient and waste energy. In: Qingdao International Conference 2011---on Desalination and Water Reuse, June 20-23, 2011, Qingdao, China. (Unpublished)
Hawlader, Mohammad Nurul Alam (2011) Training students to develop creative and innovative talents. In: International Conference on Creativity and Innovation for Sustainable Development, 11 -14 Sept 2011, International Islamic University Malaysia.
Hawlader, Mohammad Nurul Alam and Bahar, Rubina and Ng, K. C. and Loh, Jian Wei Stanley (2011) Transport analysis of an Air Gap Membrane Distillation (AGMD) process. In: Qingdao International Conference 2011---on Desalination and Water Reuse, June 20-23, 2011, Qingdao, China. (Unpublished)
Hawlader, Mohammad Nurul Alam and Seng, Lee Poh and Kiang, Chua Kok (2011) Performance of different photovoltaic cells operating under the meteorological conditions of Singapore. In: 4th IMAT 2011:International Meeting of Advances in Thermofluids, 3-4 October 2011, Melaka, Malaysia. (Unpublished)
Hawlader, Mohammad Nurul Alam and Shaochun, Ye (2011) An economic analysis of a solar assisted heat pump system for cooling, water heating and drying. In: 3rd Regional Symposium on Engineering and Technology 2011, 21-23 November 2011, Kuching, Sarawak, Malaysia. (Unpublished)
Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Mobility investigation of an intelligent air-cushion tracked vehicle on swamp peat terrain in Malaysia. In: SAE 2011 World Congress & Exhibition, April 2011, Detroit, MI, USA.
Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Study of Fuzzy Controller to control vertical position of an air-cushion tracked vehicle. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.
Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Study on air-cushion tracked vehicle performance: theoretical analysis and experimental validation. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.
Hrairi, Meftah and Baharom, Badrul Hanafi (2011) Design and modeling of silicon MEMS accelerometer. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.
Hrairi, Meftah and Echrif, Salah B. M. (2011) Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.
Hrairi, Meftah and Elias, M. A. (2011) Detection of foreign bodies in canned foods using ultrasonic testing. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.
Ihsan, Sany Izan and Farid, Khairussani and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with enhanced fuel. In: 3rd (2011) CUTSE International Conference, 8-9 November 2011, Miri, Sarawak, Malaysia.
Ihsan, Sany Izan and Khalifa, Othman Omran (2011) Continuous quality improvement strategies in engineering curriculum. In: 2nd International Conference on Engineering Professional Ethics and Education (ICEPEE ‘11), 17-19 May 2011, Kuala Lumpur. (Unpublished)
Ismail, Nurhuda and Mohamed Ali, Jaafar Syed (2011) Educational software for stress analysis of thin-walled sections 1 : Isotropic material. In: The International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2011), 17-19 May 2011, Kuala Lumpur.
Kafafy, Raed and Idres, Moumen and Aldheeb, M. and Omar, H. (2011) On the scaling of air launch vehicles. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)
Mahmoud Idres, Moumen Mohammed and Kafafy, Raed and Faris, Waleed Fekry (2011) Air supply system transient model for proton exchange membrane fuel cell. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia.
Mohamed Ali, Jaafar Syed and Ismail, Nurhuda (2011) Educational software for stress analysis of thin-walled sections 2: Composite material. In: The International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2011), 17-19 May 2011, Kuala Lumpur.
Mohammad Abdelrahman, Mohammad Ibraheem (2011) Multi-Object Attitude and Rate Tracking for Spacecraft in Formation Flying. In: AAIA Guidance, Navigation, and Control Conference, 8-11 August 2011, Portland, Oregon, USA.
Mohammed, Kaleemullah and Faris, Waleed Fekry and Faried, Hasbullah (2011) Design of robust Hoo, fuzzy and LQR controller for active suspension of a quarter car model. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11, 17-19 May 2011, Kuala Lumpur, Malaysia.
Mohammed Idres, Moumen and Hasan, Amar and Kafafy, Raed (2011) One dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-Based thermoelectrically controlled micronozzle. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May 2011, Kuala Lumpur. (Unpublished)
Mohiuddin, A. K. M. and Adeyemi, Nabeel A. and Mirghani, Mohamed Elwathig Saeed and Aibinu, Abiodun Musa and Aziz, Rashid A. and Firmansyah, F. and Anbese, Yohannes Tamirat (2011) Simulation and experimental validation: waste cooking oil transesterification using rushton and elephant ear impellers. In: The IASTED International Conference on Modelling, Simulation, and Identification (MSI 2011), 7-9 Nov 2011, Pittsburgh, USA.
Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2011) Experimental investigation of the swirl effect on CAMPRO engine using designed swirl adapter. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.
Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2011) Investigation of non-precious metals for the development of low cost catalytic converter. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey.
Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2011) Possible solution to smoothen the torque curve of the CAMPRO engine. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.
Muhammad , Mahbubur Rashid and Alang Md Rashid, Nahrul Khair and Faruq, Alias and Rahman, Mohammed Ataur (2011) Design and implementation of fuzzy based controller for modern elevator group. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA), 25-28 Sept. 2011, Langkawi.
Muyibi, Suleyman Aremu and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid and Shah, Qasim Hussain and Olalekan, Salawudeen Taofeeq (2011) Optimization of process parameters for the production of polypropylene ternary nanocomposites. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.
Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Guidance, navigation and control for satellite proximity operations using Tschauner-Hempel equations. In: AIAA Guidance, Navigation, and Control Conference, 8-11 August 2011, Portland, Oregon.
Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Relative motion guidance, navigation and control for autonomous orbital rendezvous. In: AIAA Guidance, Navigation, and Control Conference, 8-11 August 2011, Portland, Oregon.
Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Relative motion guidance, navigation and control for autonomous spacecraft rendezvous. In: Proceedings of the 21st AAS/AIAA Space Flight Mechanics Meeting, 13-17 February 2011, New Orleans, Louisiana.
Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Relative motion modeling and control in a perturbed orbit. In: 21st AAS/AIAA Space Flight Mechanics Meeting, 13–17 February 2011, New Orleans, Louisiana.
Omar, Ashraf Ali and Altaf, Alaman and Azwir, Ahmad Rizal and Abdul Rahman, Mohd Amirul (2011) Experimental investigation of the flow over IIUM-MAV using six component balance test and particle image velocimetry. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011, ICMAAE 11 , 17-19 May, 2011, Kuala Lumpur .
Omar, Nurihan and Syed Mohd, Sharifah Najwa and Aminanda, Yulfian and Syed Mohamed Ali, Jaffar and Kashif, Syed Muhammad (2011) Experimental observation of Jute/Epoxy composite plate subjected to impact loading. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Legend Hotel, Kuala Lumpur. (Unpublished)
Ong, Jiunn Chit and Omar, Ashraf Ali and Asrar, Waqar (2011) The accuracy of the gas-kinetic BGK finite difference method for solving 3-D compressible inviscid flows. In: International MultiConference of Engineers and Computer Scientists 2011 (IMECS 2011), , 16-18 March 2011, Hong Kong.
Rahman, Mohammed Ataur and Hossain, Altab (2011) Fuzzy logic traction control system for a golf cart. In: 17th International Conference of the International Society for Terrain-Vehicle Systems, 18- 22 Sept 2011, Blacksburg, Virginia, USA.
Rahman, Mohammed Ataur and Sharif, Sazzad and Alam, A. H. M. Zahirul and M.M., Rashid (2011) Intelligent electromagnetic actuated CVT system for passenger car. In: IEEE International Conference on Industrial Engineering and Engineering Management, 06-09 Dec 2011, Singapore. (Unpublished)
Rashid, Muhammad Mahbubur and Kasemi, Banna and Faruq, Alias and Alam, A. H. M. Zahirul (2011) Design of fuzzy based controller for modern elevator group with floor priority constraints. In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.
Saharin, Sanisah and Lefort, Benoite and Morin, Celine and Chauveau, Christian and Le Moyne, Luis and Kafafy, Raed (2011) Vaporization characteristics of 1-propanol droplets at high temperatures. In: ILASS – Europe 2011, 24th European Conference on Liquid Atomization and Spray System, 5 - 7 September 2011, Estoril, Portugal.
Saharin, Sanisah and Lefort, Benoite and Morin, Celine and Chauveau, Christian and Le Moyne, Luis and Kafafy, Raed (2011) Vaporization characteristics of ethanol droplets: Influence of the environment humidity. In: Proceedings of ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, British Columbia, Canada.
Shah, Qasim Hussain and ., Hanis Naily and ., Nur Syuhada (2011) Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May,2011, Kuala Lumpur, Malaysia. (Unpublished)
Sharif, Sazzad and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2011) Study on the development of a fuzzy logic control electromagnetic actuated CVT system. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.
Solihin, Mahmud Iwan and Akmeliawati, Rini and Legowo, Ari (2011) Robust controller design for uncertain parametric systems using modern optimization approach. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.
Sulaeman, Erwin and Kapania, Rakesh (2011) Analytical Finite Element Formulation of Non-uniform Euler-Bernoulli Beam. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)
Sulaiman, Nabila and Ihsan, Sany Izan and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with NGV. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-20 May, 2011, Legend Hotel, Kuala Lumpur, Malaysia.