Items where Subject is "T Technology > TS Manufactures"

Article

-, Nor Hafizah and Sopyan, Iis (2009) Nanosized TiO2 photocatalyst powder via sol-gel method: effect of hydrolysis degree on powder properties. International Journal of Photoenergy, 2009. pp. 1-8. ISSN 1687-529X

A, Nurwahidah and ., Rumiyati and Riyanto, Sigit and Ahmad Fadzillah, Nurrulhidayah and Kartika, Betania and Abdul, Rohman (2019) Fourier Transform Infrared Spectroscopy (FTIR) coupled with multivariate calibration and discriminant analysis for authentication of extra virgin olive oil from rambutan seed fat. Food Research, 3 (6). pp. 727-733. E-ISSN 2550-2166

Abd Aziz, Radhiyah and Iis, Sopyan (2009) Recent progress and development of TiO2 thin film photocatalysts for pollutant removal. Recent patents on materials science, 2 (2). pp. 88-111. ISSN 1874-4656

Abd Aziz, Radhiyah and Iis, Sopyan (2009) Synthesis SiO2-TiO2 powder and thin film photocatalyst through sol-gel. Indian journal chemistry A, 48 (7). pp. 951-957. (Unpublished)

Abd. Rahman, Mohamed and Mohd Salit, Sapuan and Abdan, Khalina (2010) Selected properties of hand-laid and compression molded pineapple leaf fiber (PALF)-reinforced vinyl ester composites. International Journal of Mechanical and Materials Engineering (IJMME), 5 (1). pp. 68-73. ISSN 1823-0334

Abd. Rahman, Mohamed and Salit, Mohd. Sapuan and Abdan, Khalina (2011) Effects of process parameters on selected properties of liquid compression-molded vinyl ester sheets. Pertanika Journal of Science and Technology, 19 (1). pp. 137-142. ISSN 0128-7680

Abdillah, Muhamad Arif and Abd Latif, Mohd Arif Hafizi and Adnan, Ammar and Mat Hasan, Mohd Raziff and Sidek, Atiah Abdullah and Abdul Hamid, Abd. Malek (2018) Kansei evaluation of universal series bus (USB) charging cable designs. Human Factors and Ergonomics Journal, 3 (1). pp. 39-43. E-ISSN 2590-3750

Abdullah, Nur Azam (2024) Integrasi teknologi, aset tempur berinovasi perkukuh peranan ATM. Berita Harian. p. 10.

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi and Riza, Muhammad and Agusman, Delvis and Rosehan, Rosehan (2010) Tool life estimation model based on simulated flank wear during high speed hard turning. European Journal of Scientific Research, 39 (2). pp. 265-278. ISSN 1450-202X E-ISSN 1450-216X

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and ., Rosehan (2008) The Development of Cost Structure for High Speed Hard Turning. International Journal of Science Engineering and Technology, 1 (2). pp. 47-58. ISSN 1985-3785

Adesta, Erry Yulian Triblas and Riza, Muhammad and Ali, Mohammad Yeakub (2012) Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles. Applied Mechanics and Materials, 117-19. pp. 633-638. ISSN 1660-9336

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Mohd Nasir, Nur Aimi and Hasham, Rosnani and Hafiz Idris, Mohamad Khairul (2020) Development of biodegradable cosmetic patch using a polylactic acid/phycocyanin–alginate composite. Polymers, 12 (8). pp. 1-11. E-ISSN 2073-4360

Ahmad, Fadli and Iis, Sopyan (2009) Preparation of porous alumina for biomedical applications through protein foaming-consolidation method. Materials Research Innovations, 13 (3). pp. 327-329. ISSN 1433-075X

Ahmad, S. H. and Rasid, Rozaidi and Surip, S. N. and Anuar, Hazleen and Czigany, T. and Abdul Razak, S. B. (2007) Mechanical and fracture toughness behavior of TPNR nanocomposites. Journal of Composite Materials, 41 (17). pp. 2147-2159. ISSN 0021-9983 (P), 1530-793X (O)

Akhtaruzzaman, Md and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Gait analysis: systems, technologies, and importance. Journal of Mechanics in Medicine and Biology, 16 (7). pp. 1-45. ISSN 0219-5194

Al-Ghamdi, Ahmed S. and Ali, Mohammad Yeakub (2012) Mechanical performance and water absorption resistance of HIPS/MWCNTs nanocomposite. Advanced Materials Research, 576. pp. 421-424. ISSN 1022-6680

Al-Ghamdi, Ahmed S. and Ali, Mohammad Yeakub (2012) Rheological and thermal behaviour of high impact polystyrene nanocomposite. Advanced Materials Research, 383. pp. 3849-3853. ISSN 1022-6680

Al-Khatib, Ma'an Fahmi Rashid and Mohammed Abd, Rasha and Alam, Md Zahangir and Mohd. Salleh, Hamzah (2011) Enzymatic hydrolysis of oil palm empty fruit bunch using immobilized cellulase enzyme. African Journal of Biotechnology, 10 (81). pp. 18811-18815. ISSN 1684–5315

Alao, Abdur-Rasheed and Konneh, Mohamed (2011) Surface finish prediction models for precision grinding of silicon. International Journal Advances Manufacturing Technology, 58 (9). pp. 949-967. ISSN 0268-3768

Ali, Mohammad Yeakub and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2012) Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate. Advanced Materials Research, 383-. pp. 1759-1763. ISSN 1022-6680

Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Banu, Asfana and Shaffiq, Muhammad and Abd. Rahman, Mohamed and Konneh, Mohamed and Salehan, Muhammad (2018) Investigation of taper angle in dry micro wire EDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. E-ISSN 2278-0149 (In Press)

Ali, Mohammad Yeakub and Hung, N. P. (2001) Surface roughness of sputtered silicon. I. surface modeling. Materials and Manufacturing Processes, 16 (3). pp. 297-313. ISSN 1532-2475 (O), 1042-6914 (P)

Ali, Mohammad Yeakub and Hung, N. P. and Ngoi, B. K. A. and Yuan, S. (2003) Sidewall surface roughness of Sputtered Silicon 1: surface modelling. Surface Engineering, 19 (2). pp. 97-103. ISSN 0267-0844

Ali, Mohammad Yeakub and Hung, NguyenPhu (2001) Surface roughness of sputtered silicon. II. Model verification. Materials and Manufacturing Processes, 16 (3). pp. 315-329. ISSN 1042-6914

Ali, Mohammad Yeakub and Hung, Wayne N.P. and Fu, Yongqi (2010) A review of focused ion beam sputtering. International Journal of Precision Engineering and Manufacturing, 11 (1). pp. 157-170. ISSN 2005-4602 (O), 1229-8557 (P),

Ali, Mohammad Yeakub and Karim, A.N. Mustafizul and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Abdullah, 'Aisy Anuarin and Idris, Mohd Nazrol (2010) Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing, 11 (5). pp. 779-784. ISSN 2005-4602 (O), 1229-8557 (P),

Ali, Mohammad Yeakub and Lim, BengHai (2006) Characterisation of surface texture using AFM with trimmed probe tip. Surface Engineering, 22 (6). pp. 443-446. ISSN 0267-0844

Ali, Mohammad Yeakub and Loo, Yee Wei (2007) Geometrical integrity of micromold cavity sputtered by FIB using multilayer slicing approach. Microsystems Technologies, 13 (1). pp. 103-107. ISSN 0946-7076

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Asfana, Banu and Roslan, Lutfi and Fahmi, M. I. (2012) Investigation of vibration and surface roughness in micro milling of PMMA. Applied Mechanics and Materials, 217/19. pp. 2187-2193. ISSN 1660-9336

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Fadila, N. and Hannah, N. (2013) Investigation of burr in high speed microdrilling. Applied Mechanics and Materials, 278. pp. 389-392. ISSN 1660-9336

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Khan, Ahsan Ali and Asfana, Banu and Lutfi, M. and Fahmi, M. I. (2013) Empirical modelling of vibration in micro end milling of PMMA. World Applied Sciences Journal , 21 (1). pp. 73-78. ISSN 1818-4952

Ali, Mohammad Yeakub and Mohammad, Ammar Sami (2008) Experimental study of conventional wire electrical discharge machining for microfabrication. Materials and Manufacturing Processes, 23 (7). pp. 641-645. ISSN 1042-6914

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of silicon nanopillar sheet for Cell Culture Dish. Advanced Materials Research, 264. pp. 1352-1356. ISSN 1022-6680

Ali, Mohammad Yeakub and Moudood, M. A. and Maleque, Md. Abdul and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3015-3026. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Ngoi, Brian K. A. (2003) Mass-replication of micro-components. Forward. p. 6.

Ali, Mohammad Yeakub and Ong, A. S. (2006) Fabricating micromilling tool using wire electrodischarge grinding and focused ion beam sputtering. International Journal of Advanced Manufacturing Technology, 31 (5-6). pp. 501-508. ISSN 1433-3015 (O); 0268-3768 (P)

Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2017) Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2). pp. 90-94. ISSN 2405-4623

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2018) Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology, 7 (3). pp. 32-39. E-ISSN 2227-524X

Ali, Mohammad Yeakub and Willey, Liew Yun Hsien and Gure, S. A. and Asfana, Banu (2012) Influence of energy parameters of micro WEDM on kerf. Advanced Materials Research, 576. pp. 527-530. ISSN 1022-6680

Alqap, Asep Sofwan F. and Iis, Sopyan (2009) Low temperature hydrothermal synthesis of calcium phosphate ceramics: effect of excess Ca precursor on phase behavior. Indian Journal Chemistry A, 48A. pp. 1492-1500. ISSN O975-0975

Alqap, Asep Sofwan F. and Iis, Sopyan and M. , Husni and N., Athirah (2012) The effects of calcium excess,water amount and mixing time on the injectability of calcium phosphate filling materials. Applied Mechanics and Materials, 110-16. pp. 8-12. ISSN 1660-9336

Amid, Azura and Abu Samah, Norshahida (2019) Proteomics as tools for biomarkers discovery of adulteration in slaughtering procedures. Science Heritage Journal (GWS), 3 (1). pp. 11-16. ISSN 2521-0858 E-ISSN 2521-086

Amin, A. K. M. Nurul and Dolah, Shuriani and Mahmud, Marlina and Lajis, M. A. (2008) Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2. Journal of Materials Processing Technology, 201 (1-3). pp. 466-470. ISSN 0924-0136

Amin, A. K. M. Nurul and Hafiz, A.M.K. and Lajis, M.A. and Patwari, Anayet U. (2010) Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel. Advanced Materials Research, 83-86. pp. 190-197. ISSN 1022-6680

Amin, A. K. M. Nurul and Hossain, Mohammad Ishtiyaq and Patwari, Anayet Ullah (2012) Enhancement of machinability of Inconel 718 in end milling through online induction heating of workpiece. Advanced Materials Research, 415-41. pp. 420-423. ISSN 1662-8985

Amin, A. K. M. Nurul and Ismail, Mohd Dali M and Musa, Muhammad Iqbal and Patwari, Anayet Ullah (2012) Prediction and investigation of surface quality in high speed end-milling of silicon to eliminate conventional finishing operations. Advanced Materials Research, 418-20. pp. 1237-1241. ISSN 1662-8985

Amin, A. K. M. Nurul and Majed, A. Fakhruzi and Daud, M. K. and Patwari, Md Anayet Ullah and Ishtiyaq, M. H. (2011) Investigation of the machinability of Inconel 718 in room temperature and preheated conditions. Advanced Materials Research, 264-65. pp. 1187-1192. ISSN 1022-6680

Anayet Ullah Patwari, Mohammed and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Role of chip serration frequency in chatter formation during end milling operation of stainless steel. Advanced Materials Research, 97-101. pp. 1989-1992. ISSN 1662-8985

Anayet Ullah Patwari, Mohammed and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2010) Investigations of formation of chatter in a non-wavy surface during thread cutting and turning operations. Advanced Materials Research, 83-86. pp. 637-645. ISSN 1022-6680

Anuar, Hazleen (2023) “Communiversity”: Students and community members work together for better environment. Asia Research News. (Unpublished)

Anuar, Hazleen (2020) Durian skin biocomposite for take-out containers and 3D printing. Asia Research News, 27th Jan. 2020.

Anuar, Hazleen and Wan Busu, Wan Nazri and Ahmad, S. H. and Rasid, Rozaidi (2008) Reinforced thermoplastic natural rubber hybrid composites with Hibiscus cannabinus, L and short glass fiber – Part I: Processing parameters and tensile properties. Journal of Composite Materials, 42 (11). pp. 1075-1087. ISSN 0021-9983 (P), 1530-793X (O)

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hilmy, Irfan (2019) Hardware improvement of FDM 3D printer: issue of bed leveling failures. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (4). pp. 603-614. E-ISSN 2278-3075

Ariff, Tasnim Firdaus and Iqbal, Mohammad and Bahar, Rubina (2015) Cost analysis of using hybrid microwave post-sintered silicon nitride inserts. Advanced Materials Research, 1115. pp. 192-195. ISSN 1022-6680

Arslan, Ahmed and Hassan, Masjuki and M. M., Quazi and Abul Kalam, Mohammad and Varman, Mahendora and Chattha, Jamshaid Anwar and Jamshaid, Muhammad and Ashrafur Rahman, S. M. and Imran, Muhammad and Zakaria, Muhammad Zulfattah and Anwar, Muhammad Tuoqeer and Gohar, Ghulam Abbas and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-9. E-ISSN 2053-1591 (In Press)

Azmi, H. and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily (2018) Comparison effect of delamination factor (Fd) on unidirectional and woven kenaf fibre reinforced plastic composite materials during milling process [Pembandingan kesan faktor pelekangan (Fd) ke atas bahan komposit plastik bertetulang ekaarah dan bertenun semasa proses pemesinan kisar]. Sains Malaysiana, 47 (4). pp. 829-838. ISSN 0126-6039

Bagum, Mst. Nasima and Konneh, Mohamed and Amin, A. K. M. Nurul (2018) Prediction and experimental validation of temperature rise in ductile mode end milling of soda-lime glass. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3437-3447. ISSN 0268-3768

Bagum, Nasima and Amin, A. K. M. Nurul and Konneh, Mohamed and Mohd Zaib, Noor Fathiah (2015) Multi-response optimizations for high speed ductile mode machining of soda lime glass. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17341-17350. ISSN 1819-6608

Banu, Asfana and Ali, Mohammad Yeakub (2016) Electrical discharge machining (EDM): A review. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 3-10. E-ISSN 0128-1852

Banu, Asfana and Bakar, Mazilah Abu and Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas (2017) Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 103-109. E-ISSN 0128-1852

Bonnia, Noor Najmi and Kamaruddin, Mohd Shahril and Nawawi, M. H. and Ratim, Suzana and Hassan, Noor Azlina and Ali, E. S. (2016) Green biosynthesis of silver nanoparticles using ‘Polygonum hydropiper’ and study its catalytic degradation of methylene blue. Procedia Chemistry, 19. pp. 594-602. ISSN 1876-6196

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2019) From green remediation to polymer hybrid fabrication with improved optical band gaps. International Journal of Molecular Sciences, 20 (16). pp. 1-23. ISSN 1661-6596 E-ISSN 1422-0067

C. M., Mardziah and Iis, Sopyan and Ramesh, Singh (2009) Strontium-doped hydroxyapatite nanopowder via sol-gel method : effect of strontium concentration and calcination temperature on phase behavior. Trends in Biomaterials and Artificial Organs, 23 (2). pp. 105-113. ISSN 0971-1198

Che Murad, Mardziah and Iis, Sopyan and Mohd, Reusmaazran and Che Hak, Rohaida and Zakaria, Ahmad and Mohd, Reusmaazran (2010) Fabrication and characterization of strontium-doped hydroxypatite bioceramics scaffolds for bone implant application: a preliminary study. Advanced Materials Research, 93-94. pp. 401-404. ISSN 1022-6680

Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ahmad, Kartini and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) High-order approximate solutions of strongly nonlinear cubic-quintic Duffing oscillator based on the harmonic balance method. Results in Physics, 7. pp. 3962-3967. E-ISSN 2211-3797

Dahnel, Aishah Najiah and Fauzi, Muhammad Haziq and A. Raof, Natasha and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid. Materials Today: Proceedings, 59 (2022). pp. 808-813. ISSN 22147853

Fadli, Ahmad and Sopyan, Iis and Ramesh, Singh (2012) Porous alumina from protein foaming-consolidation method containing hydrothermal derived hydroxyapatited powder. Applied Mechanics and Materials, 117-19. pp. 782-785. ISSN 1660-9336

Ferdosh, Sahena and Sarker, Md. Zaidul Islam and Nik Ab Rahman, Nik Norulaini and Oliveira, Alexandra and Yunus, Kamaruzzaman and Chowdury, Ahmed Jalal and Akanda, Jahurul H. and Omar, Mohd (2014) Quality of tuna fish oils extracted from processing the by-products of three species of neritic tuna using supercritical carbon dioxide. Journal of Food Processing and Preservation. ISSN 0145-8892

Ganapathy, Ponnambalam Arul and Thulasi, Selvam and Kumar, Pitchaipillai and Veeranan, Arunprasad and Shaik, Saboor and Abbas, Mohammad and Rajendran, Parvathy and Khan, Sher Afghan and Saleel, Ahmed C (2022) Investigation of dual–pass inclined oscillating bed solar dryer for drying of non-parboiled paddy grains. Sustainability, 14 (9). pp. 1-13. ISSN 2071-1050

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2012) Cutting force and tool life models in end milling titanium alloy ti-4al-4v with thermally-assisted machining. International Journal of Mechanical Computational and Manufacturing Research, 1 (1). pp. 1-5. ISSN 2301-4148

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Che Daud, Mohd Radzi and Lajis, Mohd Amri (2009) Development of surface roughness models in end milling titanium alloy Ti-6Al-4V using uncoated tungsten carbide inserts. European Journal of Scientific Research, 28 (4). pp. 542-551. ISSN 1450-216X, 1450-202X

Ginta, Turnad Lenggo and Lajis, Mohd Amri and Amin, A. K. M. Nurul (2009) The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating. American Journal of Engineering and Applied Sciences, 2 (1). pp. 147-153. ISSN 1941-7020

Gunawan, Teddy Surya and Muhamat Saleh, Nur Atikah and Kartiwi, Mira (2018) Development of quranic reciter identification system using MFCC and GMM classifier. International Journal of Electrical and Computer Engineering, 8 (1). pp. 372-378. ISSN 2088-8708

Halim, Zahurin and Ahmad, Zuraida and Tajuddin, Maisarah (2020) Physical consolidation of rattan furniture waste fibers in self-bonded boards under morphological analysis. Malaysian Journal of Microscopy, 16 (2). pp. 112-118. ISSN 1823-7010 E-ISSN 2600-7444

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) An analytical approximation technique for the duffing oscillator based on the energy balance method. Italian Journal of Pure and Applied Mathematics, 37. pp. 455-466. ISSN 1126-8042

Hossain, Mohammad Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2008) Comparison of uncoated and coated carbide inserts in end milling of Ti–6Al–4V in terms of surface roughness. International Journal of Materials Processing Technology. (In Press)

Hossain, Muhammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Karim, A. (2008) Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 320-326. ISSN 1734-8412

Hung, NguyenPhu and Ali, Mohammad Yeakub and Fu, Yongqi and Ong, NanShing and Tay, MengLeong (2001) Surface integrity and removal rate of silicon sputtered with focused ion beam. Machining Science and Technology, 5 (2). pp. 239-254. ISSN 1091-0344

Hung, NguyenPhu and Fu, Yongqi and Ali, Mohammad Yeakub (2002) Focused ion beam machining of silicon. Journal of Materials Processing Technology, 127 (2). pp. 256-260. ISSN 0924-0136

Hussin, Muhammad Shaffiq and Ali, Mohammad Yeakub and Banu, Asfana and Abdul Rahman, Mohamed and Chowdhury, Md. Sazzad Hossien (2020) Investigation of vibration in micromilling with MQL: S/N ratio analysis. TEST Engineering & Management, 83 (May-June). pp. 1026-1032. ISSN 0193-4120

Iftekar, Syed Fouzan and Aabid, Abdul and Amir, Adibah and Baig, Muneer (2023) Advancements and limitations in 3D printing materials and technologies: a critical review. Polymers, 15 (11). pp. 1-23. ISSN 2073-4360

Iis, Sopyan and A.N., Natasha (2009) Preparation of nano-structured manganese doped-biphasic calcium phosphate powders via sol-gel method. IONICS (Spinger), 15. pp. 735-741. ISSN 1862-0760

Iis, Sopyan and Jasminder, Kaur (2009) Preparation and characterization of porous hydroxyapatite through polymeric sponge method. Ceramics International, 35 (8). pp. 3161-3168. ISSN 0272-8842

Iis, Sopyan and Singh, Ramesh and Nawawi, Natasha Ahmad and Anna, Tampieri and Simone, Sprio (2011) Effects of manganese doping on the dielectric properties of titanium dioxide ceramics. Ceramics International, 37 (8). pp. 3703-3715. ISSN 0272-8842

Jamhari, Fathin Illiana and Ahmad, Zuraida and Tajuddin, Maisarah and Abuhamed, Nader (2020) Allium sativum as antimicrobial agent in Thermoplastic Sago Starch (TPSS) films for dermal wound healing. Test Engineering and Management, 83 (May-June). pp. 1014-1019. ISSN 0193-4120

K. L., Aw and Ranna, Tolouei and Singh, Ramesh and Tan, Chou Yong and W,, H. Yeo and H., Kelvin and Iis, Sopyan and Teng, Wan Dung (2011) Effects of powder synthesis method on the sinterability of hydroxyapatite. Advanced Materials Research, 264/5. pp. 1538-1544. ISSN 1022-6680

Karim, A.N. Mustafizul and Lajis, M.A. and Amin, A. K. M. Nurul (2011) Multi-criteria optimization in end milling of AISI D2 hardened steel using coated carbide inserts. Advanced Materials Research, 264-65. pp. 907-912. ISSN 1662-8985

Kays, H. M.Emrul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Varela, Leonilde and Putnik, Göran and Machado, Jose (2018) A collaborative multiplicative Holt-Winters forecasting approach with dynamic fuzzy-level component. Applied Sciences (Switzerland), 8 (4). pp. 1-28. ISSN 2076-3417

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2019) Quality management practices and sustainable performance: examining the role of soft TQM as mediator. International Journal of Industrial and Systems Engineering, 31 (2). pp. 250-277. ISSN 1748-5037 E-ISSN 1748-5045

Khalili, Amjad and Ismail, Md Yusof and Karim, Ahmad Izwan Mustafizul and Che Daud, Mohd Radzi (2017) Critical success factors for soft TQM and lean manufacturing linkage. Jordan Journal of Mechanical and Industrial Engineering, 11 (2). pp. 129-140. ISSN 1995-6665

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734 E-ISSN 2532-5655

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining. International Journal of Mechanical Engineering, 7 (1). pp. 81-90. ISSN 1823-5514

Khan, Md. Ashikur Rahman and Rahman, Mohammad Mustafizur and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. World Academy of Science, Engineering and Technology, 74. pp. 198-202. ISSN 1307-6884

Konneh, Mohamed (2016) Precision surface grinding of silicon carbide. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 51-58. E-ISSN 0128-1852

Kourra, Nadia and Warnett, Jason and Attridge, Alex and Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart and Williams, Mark and UNSPECIFIED (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. ISSN 0268-3768 E-ISSN 1433-3015

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions. Advanced Materials Research, 264-65. pp. 901-906. ISSN 1662-8985

M.A., Maleque and M.M., Rahman and Khalaf I., Hamada and M.M., Noor and K., Kadirgama and Rosli , A. Bakar and R.A., Bakar (2010) Heat transfer characteristics of intake port spark ignition engine: a comparative study. Journal of Applied Sciences, 10 (18). pp. 2019-2026. ISSN 1812-5662 (O), 1812-5654 (P)

M.M., Rahman and A.K., Ariffin and M.M., Noor and A.B., Rosli and M.A., Maleque (2009) Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp. 715-725. ISSN 1546-9239

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md. Mustafizur (2019) Optimisation of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754

Manshor, R.M and Anuar, Hazleen and Wan Busu, Wan Nazri and M.I, Ahmad Fitrie (2012) Preparation and characterization of physical properties of Durian skin fibers biocomposite. Advanced Materials Research, 576. pp. 212-215. ISSN 1022-6680

Marzuki, Wan M.R.W. and Abdul Muthalif, Asan Gani and Nordin, N. H.Diyana (2018) Semi-active torsional vibration isolation utilizing magnetorheological elastomer. Vibrations in Physical Systems, 29. pp. 1-8. ISSN 0860-6897

Mat Noor, Muhamad and A/L Kadirgama, Kumaran and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Prediction of recycle method using relevance vector machine. Advanced Materials Research , 264. pp. 943-948. ISSN 1022-6680

Mat Noor, Muhamad and Kadirgama, K. and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Pattern recognition method to predict recycling strategy for electronic equipments. Advanced Materials Research, 264-. pp. 949-955. ISSN 1022-6680

Md. Sazib Mollik, Sazib and Hasan, Muhammad Hasibul and IRUM Tariq, Irum (2015) Structural applications and emerging trends of nano- and biocomposites: a review. Advanced Materials Research, 1115. pp. 345-348. ISSN 1662-8985

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2022) Comparison of tool wear mechanisms during drilling of aluminium alloy 7075 in dry and chilled air conditions. Journal of Science and Technology, 14 (1). pp. 67-74. ISSN 2229-8460 E-ISSN 2600-7924

Mohamed, Abd. Rahman and Asfana, Banu and Ali, Mohammad Yeakub (2014) Investigation of recast layer of non-conductive ceramic due to micro-EDM. Advanced Materials Research, 845. pp. 857-861. ISSN 1022-6680

Mohamed, Abd. Rahman and Atiqah, N. and Ali, Mohammad Yeakub and Chowdhury, M. S. H. (2013) Tool vibration due to high speed micro end milling parameters. Applied Mechanics and Materials, 372. pp. 364-368. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Zakaria, Zairul Azrul (2015) Enhanced heating mechanism of the electric metal melting furnace in traditional foundry. ARPN Journal of Engineering and Applied Sciences, 10 (1). pp. 9659-9663. ISSN 1819-6608

Mohd Daud, Farah Diana and Mohamad Azir, Muhammad Mirza and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2020) The preparation of CaO-Based pellet using rice husk ash via f=granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1). pp. 234-244. ISSN 1511-788X E-ISSN 2289-7860

Mohd Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2011) Investigation of microholes produced by focused ion beam micromachining. Advanced Materials Research, 264. pp. 1346-1351. ISSN 1022-6680

Mohd Kamal, Muhammad Hafizuddin and Zakaria, Yusmazura and Md Isa, Muhammad Lokman and Nik Hassan, Nik Fakhuruddin (2020) Chemical profiling of volatile organic compounds from shoe odour for personal identification. Egyptian Journal of Forensic Sciences, 10 (1). pp. 1-10. ISSN 2090-536X E-ISSN 2090-5939

Mohd Shahar, Siti Fatimah and Jaafar, Israd Hakim and Ali, Mohammad Yeakub (2015) Parametric study of sputtering microchannels via focused ion beam (FIB). ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17397-17401. ISSN 1819-6608

Mohd. Noor, Mazni and Careem, M. A. and Majid, Siti Rohana and Arof, Abdul Kariem (2011) Characterisation of plasticised PVDF–HFP polymer electrolytes. Materials Research Innovations, 15 (supp.2). S2-157. ISSN 1433-075X

Moudood, M. A. and Sabur, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Effect of peak current on material removal rate for electrical discharge machining of non-conductive Al2O3 ceramic. Advanced Materials Research, 845. pp. 730-734. ISSN 1022-6680

Moudood, M. A. and Sabur, A. and Lutfi, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Investigation of the machinability of non-conductive zro2 with different tool electrodes in EDM. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1866-1876. ISSN 1985-9385 (P) 2180-1606(O)

Mustafa, Muhammad Hadi and Ali, Maisarah and Hashim, Khairusy Syakirin Has-Yun and Mohamad Suhaimi, Mohamad Saifulnizam (2020) Recreating historical Malay architecture with BIM process. International Journal of Built Environment and Sustainability, 7 (2). pp. 79-89. E-ISSN 2289–8948

Mustafa, Yusri and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2015) Low temperature solder alloys for ultrasonic soldering of glass. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9717-9722. ISSN 1819-6608

Nuruzzaman, D. M. and Nakajima, A. and Mawatari, T. and Ali, Mohammad Yeakub (2007) Durability and tribological properties of thermally sprayed wc cermet coating under lubricated rolling-sliding contact. IIUM Engineering Journal, 8 (1). pp. 49-62. ISSN 1511-788X

Omar, Mohamad Firdaus and Mohamad, Nuriah and Ali, Fathilah (2020) Preparation and characterizations of latex/filler nanocomposites. IIUM Engineering Journal, 21 (2). pp. 230-238. ISSN 1511-788X E-ISSN 2289-7860

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Alam, Md. Shah (2011) Improvement of surface roughness in end milling of Ti6Al4V by coupling RSM with genetic algorithm. Advanced Materials Research, 264/65. pp. 1154-1159. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology. Journal of Mechanical Engineering, 40 (2). pp. 95-103. ISSN 0379-4318

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodology approach for chip serration Frequency Prediction in milling. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 1433-3015 (O); 0268-3768 (P) (In Press)

Rahman Azmil, Nur Atiqah and Jaafar, Israd Hakim and Ali, Mohammad Yeakub and Asfana, Banu (2012) Application of focused ion beam micromachining: a review. Advanced Materials Research, 576. pp. 507-510. ISSN 1022-6680

Ranna, Tolouei and C.Y., Tan and S., Ramesh and Iis, Sopyan and W.D., Teng (2011) Effect of nano silica on the sinterability of hydroxyapatite dense bodies. Advanced Materials Research, 2634-5. pp. 1832-1838. ISSN 1022-6680

S., Ramesh and C.Y., Tan and Ranna, Tolouei and M., Amiriyan and J. , Purbolaksono and Iis, Sopyan and W.D., Teng (2012) Sintering behaviour of hydroxyapatite prepared from different routes. Materials and Design, 34. pp. 148-154. ISSN 0261-3069

Sabur, Abdus and A., Moudood and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. IOP Conference Series: Materials Science and Engineering, 53 (2013). pp. 1-5. ISSN 1757-8981

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Khan, Ahsan Ali (2013) Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic. Procedia Engineering, 56. pp. 696-701. ISSN 1877-7058

Sahari, Japar and Sapuan, Mohd Salit and Zainudin, Edi Syams and Maleque, Md. Abdul (2014) Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences, 11 (1). pp. 1836-1840. ISSN 1546-9239 E-ISSN 1554-3641

Sahir, Nurul Nadiah and Hassan, Noor Azlina and Hassan, Norita and Johari, Norhasnidawani (2021) Graphene oxide microcapsules (GOMs) with linseed oil core via Pickering emulsion method effect of disperse speed. IIUM Engineering Journal, 22 (1). pp. 213-222. ISSN 1511-788X E-ISSN 2289-7860

Saud FEMD Alazemi, Saud and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2018) Indentation mechanism in rotary hammer forging process: analytical and numerical approach. International Journal of Engineering Materials and Manufacture, 3 (4). pp. 190-199. E-ISSN 0128-1852

Shah, Qasim Hussain and Homma, H. (1995) Fracture criterion of materials subjected to temperature gradient. International Journal of Pressure Vessels & Piping, 62 (1). pp. 59-68. ISSN 0308-0161

Singh, Ramesh and Ranna, Tolouei and Tan, Chou Yong and K. L., Aw and W., H. Yeo and Iis, Sopyan and Teng, Wan Dung (2011) Sintering of hydroxyapatite ceramic produced by wet chemical method. Advanced Materials Research, 264/65. pp. 1856-1861. ISSN 1022-6680

Sopyan, Iis and Ahmad, Fadli (2012) Floating porous alumina from protein foaming-consolidation technique for cell culture application. Ceramics International, 38. pp. 5287-5291. ISSN 0272-8842

Sopyan, Iis and Fadli, Ahmad and Mel, Maizirwan (2012) Porous alumina–hydroxyapatite composites through protein foaming–consolidation method. Journal of the Mechanical Behavior of Biomedical Materials, 8. pp. 86-98. ISSN 1751-6161

Sopyan, Iis and Ramesh, Singh and Hamdi, Mohamed Salah (2008) Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry, 47 (11). pp. 1626-1631. ISSN 0376-4710

Sukindar, Nor Aiman and Syed Shaharuddin, Sharifah Imihezri and Kamruddin, Shafie and Ahmad Azhar, Ahmad Zahirani and Yang, Chuan Choong and Mohd Samsudin, Noorazizi (2022) Comparison study on mechanical properties of 3d printed pla and pla/aluminium composites using fused deposition modeling method. Malaysian Journal of Microscopy, 18 (1). pp. 1-11. ISSN 1823-7010 E-ISSN 2600-7444

Syed Abu Bakar, Sharifah Adzila and Iis, Sopyan and Abd Shukor, Mohd Hamdi (2012) Mechanochemical synthesis of hydroxyapatite nanopowder: Effects of rotation speed and milling time on powder properties. Applied Mechanics and Materials, 110-16. pp. 3639-3644. ISSN 1660-9336

Syed Shaharuddin, Sharifah Imihezri and Fauzan, Amirul Akmal and Mohamad Jazi, Mohamad Faris Izzudin and Mohd Akhir, Nur Atiqah and Othman, Maizatulnisa and Muhamad Khairussaleh, Nor Khairushima and Shaffiar, Norhashimah and Hassan, Zaimah (2020) Effect of spinning parameters on PLA/PPC/curcumin microfiber diameter: an investigation via response surface methodology. IIUM Engineering Journal, 21 (2). pp. 197-211. ISSN 1511-788X E-ISSN 2289-7860

Syed Shaharuddin, Sharifah Imihezri and Shamsuddin, Maryam Samirah and Drahman, Mohd Hafiz and Hasan, Zaimah and Mohd Asri, Nurul Anissa and Nordin, Ahmad Amri and Mohd Shaffiar, Norhashimah (2021) A review on the Malaysian and Indonesian batik production, challenges, and innovations in the 21st century. SAGE Open, 11 (3). pp. 1-19. ISSN 2158-2440

Taegeun, Kim and Saffinee, Siti Syahirah and Jamaludin, Mohd Aizat (2019) The application of Halal logistic in Korean Halal industry: a model from Malaysia perspective. Journal of Halal Industry and Services, 2 (1). pp. 1-7. ISSN 2637-0891

Tan, Chou Yong and Singh, Ramesh and Ranna, Tolouei and Iis, Sopyan and Teng, Wan Dung (2011) Synthesis of high fracture toughness of hydroxyapatite bioceramics. Advanced Materials Research, 264/5. pp. 1849-1855. ISSN 1022-6680

Toque, Jay Arre and M., Hamdi and A., Ide-Ektessabi and Iis, Sopyan (2009) Effect of the processing parameters on the integrity of calcium phosphate coatings produced by RF-magnetron sputtering. International Journal of Modern Physics B, 23 (31). pp. 5811-5818. ISSN 0217-9792 ; 1793-6578

Turahim, Khairiah K. and Abdul Muthalif, Asan Gani and Ab Rahim, Syazwani (2012) Design and fabrication of active vibration isolation system for free space optics communication. Advanced Materials Research, 576. pp. 753-756. ISSN 1022-6680

W., H. Yeo and Singh, Ramesh and Tan, Chou Yong and Aw, K. L. and Ranna, Tolouei and H., Kelvin and Iis, Sopyan and Teng, Wan Dung and Hoque, Md Enamul (2011) Effects of bismuth oxide on the properties of calcium phosphate bioceramics. Advanced Materials Research, 264/5. pp. 1839-1848. ISSN 1022-6680

Yuan, Shu and Hung, NguyenPhu and Ngoi, Bryan Kok Ann and Ali, Mohammad Yeakub (2003) Development of Microreplication Process - Micromolding. Materials and Manufacturing Processes, 18 (5). pp. 731-751. ISSN 1042-6914

Za'bah, Nor Farahidah and Kwa, Kelvin S. K. and O'Neill, Anthony (2013) Optimization of the process modules for a top-down silicon nanowire fabrication using optical lithography and orientation dependent etching. Advanced Materials Research, 629. pp. 115-121. ISSN 1022-6680

Book

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Adesta, Erry Yulian Triblas, eds. (2011) Advanced machining process. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-162-8

Amin, A. K. M. Nurul and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub, eds. (2011) Advanced machining towards improved machinability of difficult-to-cut materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-175-8

Rahman, Mustafizur and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Karim, A. N. Mustafizul and Maleque, Md. Abdul and Anuar, Hazleen and Ariff, Tasnim Firdaus and Iqbal, Mohammad and Samat, Noorasikin and Hassan, Noor Azlina, eds. (2012) Advances in manufacturing and materials engineering. Advanced Materials Research, 576 . Trans Tech Publications Ltd., , Switzerland. ISBN 978-3-03785-498-3

Ahmad Azhar, Ahmad Zahirani and Ahmad, Zainal Arifin and Maleque, Md. Abdul and Anuar, Hazleen and Rejab, Nik Akmar and Sarifuddin, Norshahida and Ab Rahman, Mohd Fariz and Ahmadipour, Mohsen, eds. (2018) International Journal of Current Research in Science & Technology. UR Publishers, Telangana, India. ISBN 2581-4311 (ISSN)

Ahmad, Kausar, ed. (2015) Manufacturing of halal pharmaceuticals. IIUM Press Series of Textbook From The Islamic Perspectives . IIUM Press, Kuala Lumpur. ISBN 978-967-418-316-5

Adesta, Erry Yulian Triblas and Iskandar, Idris and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Tasnim, Firdaus, eds. (2010) Materials Processing and Precision Engineering: series 1. Series 1 . Department of manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia.

Shuriye, Abdi Omar and Hersi, M. Hilole, eds. (2009) Religious and ethical worldviews on engineering standards. Islamic Centre for Education: Research and Development (ICERD), Australia. ISBN 9890479

Ahmad, Zuraida, ed. (2011) SAGO (metroxylon rottb) and its applications. IIUM Press, Kuala Lumpur. ISBN 9789674181635

Amin, A. K. M. Nurul, ed. (2012) Titanium alloys: towards achieving enhanced properties for diversified applications. InTech, Rijeka, Croatia. ISBN 9789535103547

Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul (2011) Heat assisted machining of hardened steel AISI D2. IIUM Press, Kuala Lumpur. ISBN 9789670225791

Amin, A. K. M. Nurul and Musa, Mohd Dali (2011) High speed end milling of single crystal silicon wafer. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-8111-5

Elhadie, Mohamed and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2011) Machining cost in conventional and hot machining: comparison and modelling. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-1703-9-5

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2010) Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining. LAP Lambert Academic Publishing, Germany. ISBN 978-3-8383-7307-2

Book Chapter

-, Suryanto (2011) Coating for high speed cutting tools. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 103-124. ISBN 9789674180232

Abd. Rahman, Mohamed and M. Nawawi, M. Kamarul Helmi (2011) Pultrusion of Pineapple Leaf Fibre (PALF)-reinforced vinyl ester composites: water absorption property. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 162-168. ISBN 9789674181598

Adesta, Erry Yulian Triblas and Mohamad Ashraf, Asfana Banu and Abdul Rahman Azmil, Nur Atiqah (2011) Critical chain in project management. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 239-245. ISBN 9789674181598

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) Effects of austempering treatment on mechanical properties of ductile iron. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 170-178. ISBN 9789674181598

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) The effect of deep cryogenic treatment on the properties of AISI D2 tool steel. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 286-293. ISBN 9789674181598

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of new model for cutting force in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 145-152. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of tooling cost model in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 125-144. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, International Islamic University Malaysia, pp. 93-100. ISBN 9789674180232

Ali, Mohammad Yeakub and Reyad, Mehfuz and Khan, Ahsan Ali and Ismail, Ahmad Faris (2005) Micro Electro Discharge Milling for Microfabrication. In: Micromachining. In-Tech, Croatia, pp. 1-28. (In Press)

Amin, A. K. M. Nurul and -, Kok and Mahmud, Md. Asif (2011) Relative performances of preheating, cryogenic cooling and hybrid turning of stainless steel AISI 304. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 49-56. ISBN 9789674181758

Amin, A. K. M. Nurul and A., Abu and D. , Salha A. and S. , Salhana B. (2011) Influence of chatter on tool life during end milling of Aluminium and Aluminium alloy on vertical machining centre (VMC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 75-82. ISBN 9789674181758

Amin, A. K. M. Nurul and Azhari, A. and Mahmud, Md. Asif (2011) Chatter suppression in end milling of Titanium alloy Ti6Al4V applying permanent magnet clamped adjacent to the workpiece. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 107-115. ISBN 9789674181758

Amin, A. K. M. Nurul and Chong , Chee and -, Sayedatul Akma (2011) Effects of scribing wheel dimensions on LCD glass cutting. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 259-265. ISBN 9789674181758

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2011) Machinability improvement in end milling of Titanium Alloy Ti-6Al-4V through preheating. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, 09-17. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Mhd Jakin, Aiman and Husin, Hafiz and Mahmud, Md. Asif (2011) The effect of cryogenic cooling in machinability of stainless steel during turning. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 203-207. ISBN 9789674181758

Amin, A. K. M. Nurul and Nashron, F. R. and Zubaire, W. W. D. (2011) Role of the frequency of secondary serrated teeth in chatter formation during turning of carbon steel AISI 1040 and stainless steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 57-64. ISBN 9789674181758

Amin, A. K. M. Nurul and Syaban, M. and Mahmud, Md. Asif (2011) Elimination of burr formation during end milling of Polymethyl Methacrylate (PMMA) through high speed machining. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 233-237. ISBN 9789674181758

Ariff, Tasnim Firdaus and Azmi, Muhammad Firdaus and Iqbal, Mohammad (2014) Cost analysis of using hybrid microwave post-sintered aluminium oxide inserts. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 53-58. ISBN 9789699952074

Dahnel, Aishah Najiah and Naiman, Mohamad Noor Ikhwan and Mohd Farid, Muhammad Azim Mirza and Abdul Rahman, Ahmad Faris and Meera Mydin, Nur Munirah (2022) Drilling of 7075 aluminum alloys. In: Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications. Intech Open. (In Press)

Helmi, Irfan (2011) Numerical analysis to characterize triaxiality value of adhesive joint due to particular load configuration. Part 1: butt joint. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 194-201. ISBN 9789674181598

Helmi, Irfan (2011) Numerical analysis to characterize triaxiality value of adhesive joint due to particular load configuration. Part 2: cleavage and scarf joint. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 202-211. ISBN 9789674181598

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2011) Assessment of performance of uncoated and coated carbide inserts in end milling of Ti-6Al-4V through modelling. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 195-202. ISBN 9789674181758

Iqbal, A. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2011) Designing human robot interaction for emotionally expressive robotic head AMIR-iii. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 32-37. ISBN 9789674181529

Iqbal, Mohammad (2011) Metabolic energy of manual lifting in manufacturing industry. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 213-219. ISBN 9789674181598

Kamarudin, Mohd Hider and Mel, Maizirwan and Abdulkarim, Mohd Ismail (2011) Optimizing bioethanol production from sago starch in bioreactor for renewable energy. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 59-70. ISBN 9789674181635

Karim, A.N. Mustafizul and Azon, Nurul Husna (2011) Value stream mapping: an important footstep for value analysis and value engineering. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 223-230. ISBN 9789674181598

Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Application of silicon carbide in abrasive water jet machining. In: Silicon Carbide. InTech, pp. 431-452. ISBN 9789533079684

Konneh, Mohamed and -, Abdul Halim (2011) Surface study when finish grinding silicon using resin bonded diamond cup wheel. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 257-263. ISBN 9789674181598

Konneh, Mohamed and Ghazali, Abdul Halim (2011) Engineering project management in automotive industry. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 247-253. ISBN 9789674181598

Konneh, Mohamed and Mukhtar, Muhammad (2011) Surface roughness studies in die-sink EDM of tungsten carbide using copper tungsten electrode. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 264-271. ISBN 9789674181598

Konneh, Mohamed and Shad, Nur Jannah and Saharudin, Noor Fazlin (2011) Study of the effect of different electrodes on material removal rate, electrode wear rate and surface roughness in the EDM of S-STAR. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 272-278. ISBN 9789674181598

M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) Performance of uncoated WC-Co in end milling of Aluminium Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 255-260. ISBN 978-967-418-175-8

Mahmood, Mahmood Hameed and Adesta, Erry Yulian Triblas (2011) The project management challenges in technology innovation. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 231-237. ISBN 9789674181598

Mel, Maizirwan and Muhammad Nadzri, Husna and Kamaruddin, Mohd Hider and Abdulkarim, Mohd Ismail (2011) The effect of saccharification process of sago starch into sugar. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 71-77. ISBN 9789674181635

Mel, Maizirwan and Muhammad Nadzri, Husna and Kamarudin, Mohd Hider and Abdulkarim, Mohd Ismail (2011) Bioethanol production from sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 41-58. ISBN 9789674181635

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) The effect of stucco system in ceramic shell investment casting. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 139-149. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus (2011) Microwave sintering of ceramic materials. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 185-191. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus (2011) Microwave sintering of metallic materials. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 179-184. ISBN 9789674181598

Mohd Ali, Afifah and Adesta, Erry Yulian Triblas (2011) Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 81-92. ISBN 9789674180232

Mohd. Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2010) Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering. Series 1 . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia, pp. 92-97.

Mushtaq, Umer and Adesta, Erry Yulian Triblas (2011) Effect of welding process on formability of tailor welded blanks. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 294-306. ISBN 9789674181598

Nordin, Norhuda Hidayah and Ahmad, Zuraida and Omar, Nurizan and Alias, Tuti Yasmin (2011) Comparative study between standard and commercial sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 17-26. ISBN 9789674181635

Omar, Mohd Afian and Subuki, Istikamah and Abdullah, Nor Syakira and Alias, Tuti Yasmin (2011) Feedstock preparation of injection moulded stainless steel using biodegradable starch binder. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 79-86. ISBN 9789674181635

Omar, Nurizan and ., Nur Humairah and Mohd Hatta, Maziati Akmal and Ahmad, Zuraida (2011) Sago, its properties and applications: a review. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 1-15. ISBN 9789674181635

Omar, Nurizan and Ishak , Norazah and Ahmad, Zuraida (2011) Sago starch: nanoclay biocomposites film. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 87-99. ISBN 9789674181635

Omar, Nurizan and Nordin, Norhuda Hidayah and Halim, Zahurin (2011) Preliminary study on superabsorbent polymer hydrogel from sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 115-128. ISBN 9789674181635

Rahman, Md. Mustafizur and Khan, Md. Ashikur Rahman and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach. In: Computers and simulation in modern science. Computers and simulation in modern science, V (Vol.5). WSEAS Press, pp. 107-113. ISBN ISBN: 978-960-474-300-1, ISSN: 1762-6882

Sabur, Abdus and Ali, Mohammad Yeakub (2011) Kerf in micro wire electro discharge machining. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 279-285. ISBN 9789674181598

Sahari, J. and Maleque, Md. Abdul and Sapuan, S. M. (2019) Sugar palm starch biopolymer: extraction and processing. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 41-55. ISBN 978-1-4987-5302-9

Saleh, Tanveer and Bahar, Rubina (2017) ELID grinding and EDM for finish machining. In: Comprehensive materials finishing. Reference module in materials science and materials engineering, 1 . Elsevier Inc., pp. 364-407. ISBN 978-0-12-803249-7

Saleh, Tanveer and Bahar, Rubina (2019) Near net shape machining by Micro-EDM and Micro-WEDM. In: Micro-electrical Discharge Machining Processes Technologies and Applications. Springer, Singapore, pp. 231-264. ISBN 978-981-13-3073-5

Sarifuddin, Norshahida and Ismail , Hanafi and Ahmad, Zuraida (2011) Preparation and characterization of glycerol plasticized sago starch-Kenaf core fibers biocomposites. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 101-114. ISBN 9789674181635

Seeni Mohamed, Nurhafizah and Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Optimization of kenaf biomass's pre-treatment for polylactic acid's monomer production. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 111-120. ISBN 9789674180218

Shuriye, Abdi Omar and Che Daud, Mohd Radzi and Mat Song, Rusdi and Ismail, Mohd Azhar (2009) Islamic values on ISO 9001-2000 certified companies in Malaysia. In: Religious and ethical worldviews on engineering standards. Islamic Centre for Education, Research and Development, Australia, pp. 105-177. ISBN 9890479

Sutjipto, Agus Geter Edy and Kaderi, Akbar (2011) Sample preparation on ceramics composite for cutting tools in high speed machining. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 61-79. ISBN 9789674180232

Wan Yusoff, Wan Ahmad Yusmawiza and Hayyun, Muhammad Fakhrani and Abdullah, Mohd Fairus (2011) The study of the implementation of OHSAS: 18001 at Kulliyyah of Engineering. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 113-120. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Saloh, Azmil (2011) Implementation of FMECA on Computer Integrated Manufacturing (CIM). In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 129-135. ISBN 9789674181598

Yusof, Yusliza and Halim, Zahurin (2011) Albumen-thermoplastic sago starch reinforeced cotton: agro-green composites. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 27-40. ISBN 9789674181635

Proceeding Paper

Abdul Malek, Norun and Mohd. Ramly, Athirah and Abdullah Sidek, 'Atiah and Mohamad, Sarah Yasmin (2016) Characterization of acrylonitrile butadiene styrene material for a 3D printed microstrip patch antenna. In: 2016 International Conference on Electrical, Electronic, Communication and Control Engineering (ICEECC 2016), 18th-19th December 2016, Johor Bahru, Johor. (Unpublished)

Abdul Rahman, Julaila and Furuya, Shigeru and Kijima, Akira (2015) Car style recognition 1990-2010. In: 1st International Conference on Creative Media, Design & Technology 2014, 25 - 27 Nov 2014, Penang.

Abu Hassan, Nur Hudawiyah and Jami, Mohammed Saedi and Mohd Daud, Farah Diana and Jamal, Nur Ayuni and Nordin, Norhuda Hidayah (2023) Enhancement of fenton process using high entropy alloy powder as catalyst. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur.

Adesta, Erry Yulian Triblas and Avicenna, Avicenna and Hilmy, Irfan and Che Daud, Mohd Radzi (2018) Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) The evaluation of lean manufacturing implementation and their impact to manufacturing performance. In: 1st International Conference on Design, Engineering and Computer Sciences 2018, ICDECS 2018, 9th August 2018, Jakarta, Indonesia.

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Aftab, Naeem and Haja Mohideen, Ahmad Jazlan and Sreeram, Victor and Lees, Michael and Lees, Mitchell (2021) Industry 4.0: an introduction to the future of manufacturing in Australia. In: 2021 Australian & New Zealand Control Conference (ANZCC), 25-26 November 2021, Gold Coast, Australia.

Ahmad A. Shahrim, Nur’Aishah and Sarifuddin, Norshahida and Ismail, Hanafi (2018) Extraction and characterization of starch from mango seeds. In: Regional Conference on Materials and ASEAN Microscopy Conference 2017, RCM and AMC 2017, 12 - 13 December 2017, Penang; Malaysia.

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2015) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 4th International Conference on Advanced Computer Science Applications and Technologies, 8-10 December 2015, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub (2018) Dry electrical discharge machining: an environmental friendly machining process. In: 2018 9th International Conference on Manufacturing Science and Technology (ICMST 2018), 11th-13th August 2018, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Focused Ion Beam Nanomachining of Cell Culture Sheet (softcopy not yet available). In: Seminar on Focused Ion Beam Nanomachining of Cell Culture Sheet , 15 June 2011, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub (2008) Focused ion beam machining of cell culture dish. In: ISE Seminar 2008, 3rd March 2008, Thailand. (Unpublished)

Ali, Mohammad Yeakub (2008) Focused ion beam micromachining of mems. In: International Symposium on Advanced Mechatronics Engineering, 29 February 2008, Changwon, S. Korea.

Ali, Mohammad Yeakub (2017) Micro electro discharge machining for nonconductive ceramic materials. In: 2nd World Symposium on Mechanical and Control Engineering (WSMCE 2017), 2nd-3rd Dec. 2017, Guilin, China. (Unpublished)

Ali, Mohammad Yeakub (2011) Micro-manufacturing technology: the huge opportunity of thinking small. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China.

Ali, Mohammad Yeakub (2011) Nanopillar Array for Cell Culture Dish. In: Seminar Nanopillar Array for Cell Culture Dish, 16 June 2011, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2011) Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China. (Unpublished)

Ali, Mohammad Yeakub and Alif, M. and Irman, K. and Hajar, N. and Hayati, N. (2008) Investigation of burr formation in micro end milling. In: International Conference on Science and Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Haque, Md. Mohafizul (2007) Manufacturing engineering education in IIUM. In: Regional Conference on Engineering Education 2007 (RCEE 2007), 03-05 December 2007, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Khan, Ahsan Ali (2008) Microengineering education in IIUM: challenges and successes. In: International Conference on MEMS and Nanotechnology, ICMN'08, 13-15 May 2008, Saloma Bistro and Theatre Restaurant, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Mehfuz, R. and Najran, W. and Akif, M. (2008) Influence of micro end milling process parameters on surface roughness. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Ammar, S. M. and Baayah, N. and Aishah, S. and Zaliha, S. and Hayati, N. (2006) Optimization of EDM parameters for micro/meso fabrication. In: 3rd BSME-ASME International Conference on Thermal Engineering, 20th-22nd December 2006, Dhaka, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub and Ayob, Mohd Hafiz and Mohd Isa, Saiful Adzli (2005) Developing a prototype micro hot embossing setup. In: 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 30 September - 2 October 2005, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.

Ali, Mohammad Yeakub and Banu, Asfana and Bakar, Mazilah Abu (2018) Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur.

Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.

Ali, Mohammad Yeakub and Bohez, E. L. J. (2000) Knowledge-based approach for stretch blow molding. In: International Conference on Precision Engineering (ICoPE) 2000, 21-23 March 2000, Singapore.

Ali, Mohammad Yeakub and Bryan, N. K. A. and Hung, W. N. P. and Alauddin, M. and Yuan, S. (2001) Surface roughness of ion-sputtered micromold. In: International Conference on Mechanical Engineering (ICME) 2001, 26-28 December 2001, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2001) Mathematical modeling of sputtering-induced surface roughness. In: International Symposium on Design, Test, Integration, and Packaging of MEMS / MOEMS 2001, 25-27 April 2001, Cannes, France.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2000) Simulation of micro-injection molding. In: International Conference on Precision Engineering (ICoPE) 2000, 21-23 March 2000, Singapore.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2001) Surface roughness of FIB sputtered silicon. In: Precision Engineering at the Beginning of a Millenium (ICPE), 18-20 July 2001, Yokohama, Japan.

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2000) Fabrication of micro cavities by micro electrical discharged machining. In: International Conference on Manufacturing (ICM) 2000, 24-26 February 2000, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2000) Fabrication of three dimensional micro-components – A review. In: 6th Annual Paper Meet & International Conference on Mechanical Engineering in the 21st Century , 17-19 February 2000, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2008) Nanotechnology education at undergraduate level: Malaysian scenario. In: National Seminar on Science, Technology and Social Sciences (STSS), 2nd-4th June 2008, Kuantan, Pahang.

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Mehfuz, R. and Aishah, S. and Hayati, N. and Hajar, N. (2008) Fabrication of micromold cavity for microreplication: A review. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Loo, Y. W. (2006) Sputtering of paraboloid microstructure using fib. In: International Conference on MEMS and Nanotechnology (ICMN'06), 15-16 March 2006 , Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, A. and N., Atiqah (2011) Investigation of tribological issues in microforming: a review. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, malaysia.

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, Asfana and Sabur, Abdus and Debnath, Sujan (2018) Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017), 23rd-25th July 2017, Hong Kong, China.

Ali, Mohammad Yeakub and Mass Duki, Siti Hamizah and Mansor, Noor Adila (2011) Minimum chip thickness in machining MEMS structure using Tool Based Micromilling. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and Mehfuz, R. (2008) Investigation of finish cut of micro electro discharge milling for nano surface finish. In: International Conference on nanoManufacturing (nanoMan2008), 13-16 July 2008, Singapore.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Bio-MEMS Nanostructure by focused ion beam. In: International Conference on the Advancement of Materials and Nanotechnology, 29 Nov-1 Dec 2010, Prince Hotel, Kuala Lumpur.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: UNSPECIFIED.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of micropillar sheet for cell culture dish. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC.

Ali, Mohammad Yeakub and Mohd. Hajar, Nurul Hajar (2011) Fabrication of Micropillar Sheet for Cell Culture Dish. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and N.I, Rashidah and N.A, Azima (2007) Wire electrical discharge machining for microfabrication. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Ngoi, B. K. A. and Hung, N. P. and Yuan, S. and Lee, C.P. (2001) Hot embossing and injection molding of three-dimensional microcomponents. In: BSME-ASME International Conference on Thermal Engineering, 31 December 2001 - 02 January 2002, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Ong, A. S. and Konneh, Mohamed (2005) Micromilling of tungsten carbide using focused ion beam. In: International Conference on Mechanical Engineering 2005 (ICME2005), 28-30 December 2005, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Reyad, Mehfuz (2007) Design and fabrication of micro swiss-roll combustor mold by micro EDM milling. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 12-13 Dec. 2007, Culture Activity Centre (CAC), IIUM . (Unpublished)

Ali, Mohammad Yeakub and Rosfazila, M. R. and Rosnita, E. (2008) Geometrical integrity of microholes drilled by conventional and micro electrical discharge machining. In: "Advanced Design and Manufacture to Gain a Competitive Edge: New Manufacturing Techniques and their Role in Improving Enterprise Performance", 14- 16 January 2008, Sanya, Hainan; China.

Ali , Mohammad Yeakub and Abd. Rahman, Mohamed and Banu, Asfana and Adnan, Shakira and Nadia, Fatin (2016) High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014), 23rd-25th Nov. 2014, Cameron Highland, Pahang.

Amin, A. K. M. Nurul and Mohd, Ahmad Azhari and Hadi, Abdul Qayyum (2011) The method of chatter suppression in end milling operation. In: IIUM Research, Invention and Innovation Exhibition 2011 (IRIIE 2011), 9-10 February 2011, Kuala Lumpur, Malaysia.

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, Syufiqa Nurfatin and Zahari, Siti Zulaikha and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2017) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Bagum, Mst. Nasima and Konneh, Mohamed and Abdullah, Kasim Abdulrahman. . and Ali, Mohammad Yeakub (2018) Chip morphology as a performance predictor during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.

Bagum, Mst. Nasima and Konneh, Mohamed and Ali, Mohammad Yeakub (2018) Establishing relationship between process parameters and temperature during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2020) An investigation of hole quality during drilling of carbon fibre reinforced plastic and titanium (Ti6Al4V) using tungsten carbide drills. In: UNSPECIFIED.

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2020) An investigation of hole quality during drilling of carbon fibre reinforced plastic and titanium (Ti6Al4V) using tungsten carbide drills. In: 4th Advanced Materials Conference 2018 (AMC 2018), 27th - 28th November 2018, Kuching, Sarawak, Malaysia.

Dahnel, Aishah Najiah and Faris, Muhammad Firas and Azman, Mohamad Anas Fikri (2023) Hardness and microstructural analysis of recycled aluminum 7075. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Dahnel, Aishah Najiah and Fauzi, Muhammad Haziq and A. Raof, Natasha and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid. In: Third International Conference on Recent Advances in Materials and Manufacturing 2021, 25-26 November 2021, India.

El-Sayed, Mohamed Hassan Attia and Ariff, Tasnim Firdaus and Noor Awalludin, Muhammad Mukhtar (2023) Development of framework for the management, handling system and maintenance in using hydrosurgery at hospitals. In: WJTA Conference and Expo 2023, 31 October - 1 November 2023, New Orleans, Louisiana.

Embrandiri, Asha and Rupani, Parveen Fatemeh and Mohamad, Mohd Azrul Naim and Jamaludin, Mohd Hafiz (2018) Valorization of fish processing waste: a microbial perspective. In: 1st Euro-Mediterranean Conference for Environmental Integration (EMCEI), 22-25 November 2017, Sousse, Tunisia.

Haiyam, F. N. and Hilmy, Irfan and Sulaeman, Erwin and Mohamed Ariff, Tasnim Firdaus and Adesta, Erry Yulian Triblas (2018) Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Hanash, Ebrahim and Ali, Mohammad Yeakub (2018) Experimental study of electrical discharge drilling of stainless steel UNS S30400. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Haque, Md. Mohafizul and Ismail, Ahmad Faris and Alias, Tuti Yasmin (2009) Selection of materials and manufacturing processes for green engineering. In: International Conference on Advances on Materials and Processing Technologies( AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.

Hrairi, Meftah and Baharom, Badrul Hanafi (2011) Design and modeling of silicon MEMS accelerometer. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hrairi, Meftah and Chtourou, Hedi (2010) Predicting density distribution in green compacts using finite element simulations. In: International Conference on Mathematical Applications in Engineering (ICMAE’10), 3 - 4 Aug, 2010, Kuala Lumpur.

Hrairi, Meftah and Echrif, Salah B. M. (2011) Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hung, N. P. and Ali, Mohammad Yeakub and Yuan, S. (2000) Producing LIGA-competitive microcomponents. In: International Conference on Micromachining and Microfabrication Process Technology VI 2000, 22-25 October 2000, California, USA.

Hung, N. P. and Yuan, S. and Lee, E. C. W. and Ali, Mohammad Yeakub (2001) Development of a micromolding process. In: International Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2001, 25-27 April 2001, Cannes, France.

Hung, W. N. P. and Agnihotri, M. M. and Ali, Mohammad Yeakub and Yuan, S. (2006) Molding of three-dimensional microcomponents. In: International Conference on Manufacturing Science and Engineering, 8-11 October 2006, Michigan, USA.

Hung, W. N. P. and Ngothai, Y. and Yuan, S. and Lee, C. W. and Ali, Mohammad Yeakub (2001) Micromolding of three-dimensional components. In: Precision Engineering at the Beginning of a Millenium (ICPE), 18-20 July 2001, Yokohama, Japan.

Ibrahim, Kader and Chik, Mohd Azizi and Nizam, Wan Shamsir and Nyioh, Li Fem and Za'bah, Nor Farahidah (2003) Efficient lot batching system for furnace operation. In: Advanced Semiconductor Manufacturing Conference (2003 IEEEI/SEMI), 31 March-1 April 2003 , Munich, Germany.

Izman, S. and Abdul-Kadir, Mohammed Rafiq and Anwar, Mahmood and Nazim, E. M. and Khor, E. K. and Konneh, Mohamed (2010) Effect of pickling and mechanical surface treatment methods on adhesion strength of Ti oxide layer formed on Titanium alloy substrate. In: 2010 34th IEEE/CPMT InternationalElectronic Manufacturing Technology Symposium (IEMT), 30th Nov - 2nd Dec 2010, Melaka, Malaysia.

Jami, Mohammed Saedi and Iwata, Masashi (2020) Modelling of constant pressure expression of homogeneous semi-solid material. In: Kulliyyah of Engineering Research, Innovation and Commercialization Exhibition (KERICE), 8th December 2020, Kuala Lumpur. (Unpublished)

Janin, Zuriati and Sam, Rosidah and Masrie, Marianah and Abdul Kadir, Kushsairy and Mohamad Hanif, Noor Hazrin Hany and Gunawan, Teddy Surya (2019) Performance evaluation for SE 113 flow control system plant using self-tuning fuzzy PI controller. In: 5th IEEE International Conference on Smart Instrumentation, Measurement and Application (ICSIMA 2018), 28th-30th Nov. 2018, Songkhla, Thailand.

Karim, A.N. Mustafizul and Abd. Rahman, Mohamed and Hj. Yusop, Nornilawati (2014) Mitigation of WIP-related problems at an IC production line through a suitable inspection sampling plan. In: International Conference on Industrial Engineering and Operations Management, 7th-9th Jan. 2014, Bali, Indonesia.

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2008) Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: International Conference on Mechanical and Manufacturing (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Konneh, Mohamed and Amin, A. K. M. Nurul and Afzeri, Afzeri and Ahmarofi, A. A. (2009) Development of a low cost lapping process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul (2018) Surface morphology study in high speed milling of soda lime glass. In: 3rd International Conference on the Science and Engineering of Materials (ICoSEM 2017), 24th-25th Oct. 2017, Kuala Lumpur.

Konneh, Mohamed and Izman, S. and Ali, Mohammad Yeakub (2006) An investigation on morphology of hard-brittle silicon surface by diamond grinding. In: International Conference on Manufacturing Science and Technology (ICOMAST 2006), 28-30 August 2006, Melaka, Malaysia.

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2008) Preheated machining in end milling of hardened steel AISI D2. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 November 2008, Gold Coast, Australia.

Liana, N. A. and Amsyar, N. and Hilmy, Irfan and Yusof, M. D. (2018) Lean energy analysis of CNC lathe. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul (2011) Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and A., Atiqah and R. J., Talib and Halim, Zahurin (2011) New natural fibre reinforced composite brake friction material. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and A. R., Zamani and R. J., Talib (2011) Tribological study of A1 based natural fibre reinforced composite brake pad materials. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and Abdullah, Umma and Yaacob, Iskandar Idris and Ali, Yousaf (2016) Characterization of ball-milled carbon nanotube dispersed aluminum mixed powders. In: 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3), 6th-10th October, 2014, Miskolc-Lillafüred, Hungary.

Mehfuz, R. and Ali, Mohammad Yeakub (2007) Surface roughness analysis of beryllium-copper alloy in micro end milling. In: International Conference on Mechanical Engineering (ICME 2007), 29-31 December 2007, Dhaka, Bangladesh.

Moe Win@Shamsudin, Thein and Salami, Momoh Jimoh Eyiomika and Martono, Wahyudi (2007) RFID-based intelligent books shelving system. In: 2007 1st Annual RFID Eurasia, 5-6 Sep 2007, Istanbul.

Mohamed, Farahidah (2020) A Way Forward – Harmonization of Islamic Compliance (Halalan Toyyiban) in Halal Pharmaceuticals. In: PROGRAM PERKONGSIAN AMALAN TERBAIK PRODUCTIVITY MELALUI WEBINAR, Malaysia / webinar via Zoom.

Mohamed, Ruziana and Mamat, M. H. and Malek, Mohd Firdaus and Ismail, Ahmad Syakirin and Mohd Yusoff, Marmeezee and Mohd Noor, Asiah and Khusaimi, Zuraida and Rusop, Mohamad (2018) Effect of different coating layer on the topography and optical properties of ZnO nanostructured. In: 8th International Conference on Nanoscience and Nanotechnology 2017, NANO-SciTech 2017, 24 -27 February 2017, NANO-SciTech 2017; Selangor; Malaysia.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of copper and antimony on the mechanical properties of pewter alloys made by conventional and microwave powder sintering. In: 4th International Conference on Recent Advances in Materials, Minerals & Environment and 2nd Asian Symposium On Materials & Processing (RAMM & ASMP 2009), 1-3 June 2009, Penang, Malaysia.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of powder sintering method on the densification and microstructure of pewter alloys. In: Processing, Microstructure and Performance of Materials, 8–9 April 2009, Auckland, New Zealand.

Mohamed Ariff, Tasnim Firdaus and Sayadek, Mohd Shahril (2023) Wear analysis of titanium carbonitride in machining high strength steel (KRUPP 6582) using used palm oil as cutting fluid. In: 1st International Conference on Manufacturing Engineering Technology (IConMET 2021), Langkawi Island, Malaysia.

Mohammad, Amar Sami and Ali, Mohammad Yeakub (2006) Polymeric micro-fluidic channel by hot embossing. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 5-6 Dec 2006, Culture Activity Centre (CAC), IIUM . (Unpublished)

Mohammad, Ammar Sami and Ali, Mohammad Yeakub (2006) Fabricating hot embossing micro tool using electrodischarge machining. In: International Conference on Manufacturing and Materials Processing 2006, 14-16 March 2006, Kuala Lumpur, Malaysia.

Mohd Nordin, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi (2023) Effect of supercritical carbon dioxide pressure on foamed PolyLactic Acid biocomposite. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Mridha, Shahjahan and Md. Idriss, A. N. and Maleque, Md. Abdul and -, Suryanto and Mohamad, Souad A. (2011) Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Nabinejad, Omid and Debnath, Sujan and Beh, Jack Kai and Ali, Mohammad Yeakub (2018) Mechanical performance and moisture absorption of unidirectional bamboo fiber polyester composite. In: 8th International Conference on Manufacturing Science and Technology, ICMST 2017, 23-25 June 2017, Hong Kong.

Nor Hairin, Assayidatul Laila and Romainor, M. N. and Othman, Raihan and Mohd Daud, Farah Diana (2018) Electrodeposition of zinc antimony alloy thermoelectric materials. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference, 15 - 17 December 2008, Chennai, India.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and Farahain, S (2009) Chip serration frequency-the primary cause of chatter during end milling operation. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ginta, Turnad Lenggo and Alam, S. and Lajis, M. A. (2008) Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008), 24 - 27 November 2008, Sarawak, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2008) Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008), 21-23 May, 2008, Johor Baru, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Sharulhazrin, M. S. and Hafizzudin , I (2010) A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45). In: International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010, 17-19 March, 2010, Hong Kong.

Prabowo, Herry Agung and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2020) Total productive maintenance implementation’s barriers and enablers in Indonesian manufacturing companies. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, 4 Feb.-9 April 2020, Dubai, United Arab Emirates.

Qushem, Umar and Abubakar Ibrahim, Adamu and Zeki, Akram M. and Akleylek, Sedat (2017) The trend of business intelligence adoption and maturity. In: 2nd International Conference on Computer Science and Engineering, 5th-8th October 2017, Antalya, Turkey.

Rahman, Md Mujibur and Rahman, Haolia Y. and Awang, M. A.A. and Sopyan, Lis (2018) Effects of sintering time and temperature to the characteristics of FeCrAl powder compacts formed at elevated temperature. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Reyad, Mehfuz and Ali, Mohammad Yeakub (2006) Micro/Meso Mechanical Manufacturing (M4): opportunities and challenges: a review. In: Regional Postgraduate Conference on Engineering and Science, 26th-27th Jul, 2006, UTM, Malaysia. (Unpublished)

Saad , Siti Asmahani and Abdul Aziz, Farah Nora Aznieta and Ali, Maisarah (2014) Effect of tropical climate condition to compressive strength and microstructure properties of High Performance Fiber Reinforced Concrete (HPFRC). In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Sara Lee, K.Y and Christopher Chin, K.M., and Ramesh, Singh and Tan, Chou Yong and Teng, Wan Dung and Sopyan, Iis (2012) Characterization of forsterite bioceramics. In: International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2012, 3 - 5 July 2012 , Kuala Lumpur; Malaysia.

Sarker, Md Zaidul Islam and Azmir, Jannatul and Khan, Md Sharif and Ferdosh, Sahena (2014) Supercritical fluid extraction of oil from Mahkota dewa seed. In: 2014 International Science and Technology Conference (ISTEC), 18th-20th December, 2014, Doha, Qatar.

Tengku Azmi, Tengku Muhammad Afif and Sulaiman, Nadzril (2019) Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: 5th International Conference on Computational Science and Technology (ICCST 2018), 29th-30th August 2018, Kota Kinabalu, Sabah.

Wahid, Zaharah and Ming, T. T. and Ahmad, Kartini (2020) Use of Taguchi robust design to optimize rubber glove process. In: 5th International Conference on Mathematical Applications in Engineering 2019, 30th - 31st Oct. 2019, Putrajaya International Convention Centre Putrajaya, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and A. Nasir, Safwa and Ahmad, Wan Mohamad Hakimi (2011) Investigation of the effect of “Orange Peel” surface texture on the laser sintered part. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25th - 28th September 2011, Langkawi, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Azrai, Muhammad and Mohamad, Ahlam Hadi (2014) Improving the design of peripheral IV therapy by employing product development approach and rapid prototyping technology. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10 -11 April 2014, Seoul; South Korea.

Wan Yusoff, Wan Ahmad Yusmawiza and Fakhrani, Muhammad and Fairus, Mohd and Adesta, Erry Yulian Triblas (2011) The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE). In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Yuan , S. and Ngoi, B. K. A. and Hung, N. P. and Ali, Mohammad Yeakub (2004) Fabrication of microcomponents by injection molding. In: International Conference on Precision Engineering (ICoPE) 2003/04, 02-05 March 2004, Singapore.

Yusof, M. Q.M. and Harun, H. N.S.B. and Bahar, Rubina (2018) Experimental investigation of minimum quantity lubrication in meso-scale milling with varying tool diameter. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Monograph

Ali, Mohammad Yeakub (2011) Application of focused ion beam for machining of nanopillar sheet. Research Report. s.n. (Unpublished)

Ali, Mohammad Yeakub (2009) Development of micro end milling process for fabricating MEMS. Research Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2008) Geometrical integrity of microholes produced by micro-EDM. Research Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2008) Micro-drilling of metallic materials for microsystems technology. Project Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Noble tool based micromilling for nanometric surface finish. Research Report. Ministry of Higher Education, Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Powder mixed micro electro discharge machining (PMμEDM). Project Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering. Research Report. UNSPECIFIED. (Unpublished)

Yeakub Ali, Mohammad and Ali Khan, Ahsan and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus (2019) Noble approach to control vibration using minimum quantity lubrication (MQL) in micro milling. Research Report. UNSPECIFIED. (Unpublished)

Copyright

Samat, Noorasikin and Mohd Zaki, Hafizah Hanim and Manshor, Hanisah and Abd Malek, Mohamad Ashraff Danial and Ramli, Fatin Umaidah (2020) AMSERU. [Copyright] (Unpublished)

Sukindar, Nor Aiman and Yang, Chuan Choong and Ahmad Azhar, Ahmad Zahirani and Kamaruddin, Shafie and Mel, Maizirwan (2021) 100gm Pouch Food Holder. [Copyright] (Unpublished)