Items where Subject is "T Technology > TS Manufactures > TS155 Production management"

A

Abd Rahim, Siti Huda and Embong, Abd Halim (2021) Overall equipment utilisation (OEU) monitoring and remote quality check in legacy machine with raspberry pi. Journal of Intergrated and Advanced Engineering, 1 (2). pp. 135-144. E-ISSN 2774-6.38

Abd. Rahman, Mohamed and Mohiuddin, A. K. M. and Hanani, Abdullah (2014) Six sigma approach to improve the painting process: a case study of a Malaysian vehicle assembly company. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Abdesselam, M. and Karim, A. N. M. and Kays, H. M. E. and Rahman, M. A. and Sarker, R.A. (2015) Formulation of an IP-based model for reactive flow-shop scheduling problem subject to arrival of new orders. Advanced Materials Research, 1115. pp. 616-621. ISSN 1022-6680

Adesta, Erry Yulian Triblas and Agusman, Delvis and Avicenna, Avicenna (2017) Internet of Things (IoT) in agriculture industries. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 5 (4). pp. 376-382. ISSN 2089-3272

Adesta, Erry Yulian Triblas and Alazemi, Yahya (2017) Integrated engineering project management Approach for typical small to medium manufacturing companies. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 541-545. ISSN 2502-4752 E-ISSN 2502-4760

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) Total productive maintenance (TPM) implementation based on lean manufacturing tools in Indonesian manufacturing industries. International Journal of Engineering & Technology, 7 (37). pp. 156-159. ISSN 2227-524X

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) The evaluation of lean manufacturing implementation and their impact to manufacturing performance. In: 1st International Conference on Design, Engineering and Computer Sciences 2018, ICDECS 2018, 9th August 2018, Jakarta, Indonesia.

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung and Agusman, Delvis (2018) Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Aftab, Naeem and Haja Mohideen, Ahmad Jazlan and Sreeram, Victor and Lees, Michael and Lees, Mitchell (2021) Industry 4.0: an introduction to the future of manufacturing in Australia. In: 2021 Australian & New Zealand Control Conference (ANZCC), 25-26 November 2021, Gold Coast, Australia.

Ahmad, Zuraida and Tajuddin, Maisarah and Salim, Nurul Farhana Fatin and Halim, Zahurin (2018) Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal, 19 (1). pp. 185-196. ISSN 1511-788X E-ISSN 2289-7860

Ariff, Tasnim Firdaus and Ahmed, Shamsuddin (2005) Making the lean manufacturing supply chain leap across small and medium scale industries (SMIs) in Malaysia. In: International Conference on Recent Advances in Mechanical & Material Engineering (ICRAMME 2005), 6-7 June 2005, Kuala Lumpur.

Ariff, Tasnim Firdaus and Ahmed, Shamsuddin (2005) The development of strategies for lean operations in SMIs. In: International Conference on Recent Advances in Mechanical & Material Engineering (ICRAMME 2005), 30 - 31 May 2005, Kuala Lumpur.

D

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2016) The effect of varying cutting speeds on tool wear during conventional and Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC) and titanium alloy stacks. In: 7th CIRP Conference on High Performance Cutting, HPC 2016, 31st May-2nd June 2016, Chemnitz; Germany.

Dahnel, Aishah Najiah and Barnes, Stuart and Bhudwannachai, Pipat (2014) Drilling of carbon fibre composites: a review. In: 1st International Manufacturing Engineering Conference (iMEC) 2013, 1st-3rd July 2013, Gambang, Kuantan, Pahang.

E

Emrul Kays, H. M. and Karim, A. N. Mustafizul and Abdesselam, M. and Al Hazza, Muataz Hazza Faizi and Sarker, M. Ruhul Amin (2014) Formulation of integer programming model for balancing and scheduling of production line having shared resources. In: International Conference on Industrial Engineering and Operations Management, 7th-9th Jan. 2014, Bali, Indonesia.

G

Ghane, Neda and Avakh Darestani, Soroush and Ismail, Md Yusof and Azam, Moradi Tadi (2021) Developing fuzzy tool capability measurement system analysis. Journal of Optimization in Industrial Engineering, 14 (2). pp. 79-92. ISSN 2251-9904 E-ISSN 2423-3935

J

Jamaludin, Mohammad Aizat and Abdullah Sani, Muhammad Shirwan and Hashim, Yumi Zuhanis Has-Yun (2018) The emergence of global halal industry ecosystem. Journal of Halal Industry and Services, 1 (1). ISSN 2637-0891

Jamaludin, Mohd Aizat and Md Amin, Nur Alifah and Ahmad Fadzillah, Nurrulhidayah and Muflih, Betania Kartika and Othman, Rashidi and Abdullah Sani, Muhammad Shirwan and Ramli, Mohd Anuar (2017) Study on physiochemical properties and the halalness of commercially marketed vinegar in Malaysia. International Food Research Journal (IFRJ), 24 (Suppl.). S428-S435. E-ISSN 2231-7546

K

Karim, A.N. Mustafizul and Ikram, M and Kays, H. M. Emrul and Abdesselam, M. and Ginta, Turnad Lenggo (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 529. pp. 83-89. ISSN 1022-6680

Kays, H. M. E and Karim, A. N. Mustafizul and Varela, M. L. R. and Santos, A. S. and Madureira, A. M. (2015) An integer programming approach for balancing and scheduling in extended manufacturing environment. In: 10th Iberian Conference on Information Systems and Technologies, CISTI 2015;, 17th - 20th June 2015, Aveiro; Portugal.

Kays, H. M. E. and Karim, A. N. M. and Tajudin, M. N. B. and Abdesselam, M. (2015) Design of a heuristic for balancing a multi-stage production flow line. Advanced Materials Research, 1115. pp. 610-615. ISSN 1022-6680

Khalili, Amjad and Abbadi, Ala’ and Ismail, Md Yusof (2019) Perspective of social media as an organisational KM tool: contemporary literature review. International Journal Knowledge and Learning, 13 (1). pp. 10-24.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) A critical assessment of prevailing models for measuring lean manufacturing. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N.Mustafizul and Che Daud, Mohd Radzi (2018) Soft total quality management and lean manufacturing initiatives: model development through structural equation modelling. International Journal of Productivity and Quality, 23 (1). pp. 1-30. ISSN 1746-6474 E-ISSN 1746-6482

Khalili, Amjad and Karim, A.N. Mustafizul and Ismail, Md Yusof and Che Daud, Mohd Radzi (2019) Linkages of QMS and soft EMS: perceptions of operations managers as modelled by SEM. International Journal of Services and Operations Management, 34 (3). pp. 341-360. ISSN 1744-2389

M

M., Abdesselam and Karim, A.N. Mustafizul and Kays, H. M. Emrul and Sarker, R. A. (2014) Forecasting demand: development of a fuzzy growth adjusted holt-winters approach. Advanced Materials Research, 529. pp. 402-407. ISSN 1022-6680

Mohamed, Farahidah (2020) A Way Forward – Harmonization of Islamic Compliance (Halalan Toyyiban) in Halal Pharmaceuticals. In: PROGRAM PERKONGSIAN AMALAN TERBAIK PRODUCTIVITY MELALUI WEBINAR, Malaysia / webinar via Zoom.

Mohamed Elnour, Ahmed Adam and Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Musa, Khalid Hamid (2018) Gum arabic: determination of solvent effect on the extraction of phenolic compounds and antioxidant activity using principle component analysis. In: 4th International Conference on Chemical Engineering and Industrial Biotechnology (ICCEIB 2018), 1st-2nd August 2018, Kuantan, Pahang. (Unpublished)

Mohd Radzi, H.C.D. (2017) FORMULATION OF SLOW RELEASE COMPRESSED FERTILIZER AND INITIAL DESIGN FOR PRODUCTION SYSTEM. Project Report. UNSPECIFIED. (Unpublished)

Mohd Safian, Yasmin Hanani and Salleh, Ahmad Zaki and Jamaludin, Mohammad Aizat and Jamil, Muhammad Hafizuddin (2020) Halal governance in Malaysian companies. Journal of Fatwa Management and Research, 20 (1). pp. 40-52. ISSN 2232-1047 E-ISSN 0127-8886

Mohiuddin, A. K. M. and Abd. Rahman, Mohamed and Julia , Abdul Jabar (2014) Adoption and adaptation of Japanese manufacturing management: a case study of an automotive company in Malaysia. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

N

Naser, Yaqubi and Abubakar Ibrahim, Adamu (2022) The use of robots for delivery of packages in food industries and its impact on job loss. Journal of Information Systems and Digital Technologies, 4 (2). pp. 179-197. E-ISSN 2682-8790

Nazri, M. N. B. A. and Haque , M. and Karim, A. N. M. and Muhamad, Fatima (2015) Ranking of manufacturing attributes affecting bread quality: application of analytic hierarchy process. Advanced Materials Research, 1115. pp. 601-605. ISSN 1662-8985

R

R. Ratnam, R. Kalaivalli (2017) Panduan proses pengauditan MS ISO 9001 di Institut Pendidikan Guru. Sasbadi Sdn. Bhd., Petaling Jaya, Selangor. ISBN 9789835991486

Ramli, Mohd Hasli and Rosman, Arieff Salleh and Md Sikin, Adi and Jamaludin, Mohammad Aizat and Ajmain, Muhammad Talhah (2020) Halal assurance at farm level in the poultry supply chain. Journal of Islamic, Social, Economics and Development (JISED), 5 (31). pp. 1-11. E-ISSN 0128-1755

S

Santos, A. S. and Madureira, A. M. and Varela, M. L. R. and Putnik, G. D. and Emrul Kays, H. M. and Karim, A.N. Mustafizul (2015) Scheduling and batching in multi-site flexible flow shop environments. In: 2015 10th Iberian Conference on Information Systems and Technologies (CISTI), 17th-20th June 2015, Aveiro, Portugal.

Sarker, Ruhul and Essam, Daryl and Kamrul Hasan, S.M. and Karim, A.N. Mustafizul (2015) Managing risk in production scheduling under uncertain disruption. Articial Intelligence for Engineering Design, Analysis and Manufacturing. 1 -11. ISSN 0890-0604

Sulong, Farizah and Sulaiman, Maliah and Mohd Alwi, Norhayati (2013) Material Flow Cost Accounting (MFCA) in Malaysia: an SME's case for cleaner production. In: EMAN-EU 2013 Conference Material Flow Cost Accounting, 20th-22nd March, 2013, Dresden, Germany.

Syed Shaharuddin, Sharifah Imihezri and Fauzan, Amirul Akmal and Mohamad Jazi, Mohamad Faris Izzudin and Mohd Akhir, Nur Atiqah and Othman, Maizatulnisa and Muhamad Khairussaleh, Nor Khairushima and Shaffiar, Norhashimah and Hassan, Zaimah (2020) Effect of spinning parameters on PLA/PPC/curcumin microfiber diameter: an investigation via response surface methodology. IIUM Engineering Journal, 21 (2). pp. 197-211. ISSN 1511-788X E-ISSN 2289-7860

W

Wahid, Zaharah (2018) Enhancement of productivity of manual operation of soya sauce factory. In: 7th International Conference on Engineering Business Management (ICEBM), 4th-5th August 2018, Kuala Lumpur. (Unpublished)

Wahid, Zaharah and Ming, T.Tham and Ahmad, Kartini (2019) Taguchi robust design as a way to optimize rubber glove process. In: IIUM Engineering Congress 2019 (ICOM '19), 30-31 OCT 2019, PICC , PUTRA JAYA. (Unpublished)

Wahid, Zaharah and Shohaimi, Anis Syuhaiz and Che Man, Muhammad Shaharul (2016) Implementation of Halal quality management system in small and medium scale enterprise- impact of mentoring and coaching. In: International Conference on Knowledge Transfer (ICKT'15), 1st-3rd Dec. 2015, Putrajaya.

Y

Yusof, Noor Jazilah and Kamaruddin, Shafie (2021) Optimal design of step – cone pulley problem using the bees algorithm. In: Intelligent Manufacturing and Mechatronics. Lecture Notes in Mechanical Engineering . Springer Nature Singapore Pte Ltd, Singapore, pp. 139-149. ISBN 978-981-16-0865-0