IIUM Repository (IREP)

Items where Subject is "T Technology > TS Manufactures"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Jump to: - | A | B | C | E | F | G | H | I | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items at this level: 243.

-

-, Nor Hafizah and Sopyan, Iis (2009) Nanosized TiO2 photocatalyst powder via sol-gel method: effect of hydrolysis degree on powder properties. International Journal of Photoenergy, 2009. pp. 1-8. ISSN 1687-529X

-, Suryanto (2011) Coating for high speed cutting tools. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 103-124. ISBN 9789674180232

A

A. Raof, Natasha and A. Ghani, Jaharah and Syarif, J. and Che Haron, Che Hassan and Abdul Hadi, Musfirah (2014) Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel. Applied Mechanics and Materials, 554. pp. 7-11. ISSN 1660-9336

Abd Aziz, Radhiyah and Iis, Sopyan (2009) Recent progress and development of TiO2 thin film photocatalysts for pollutant removal. Recent patents on materials science, 2 (2). pp. 88-111. ISSN 1874-4656

Abd Aziz, Radhiyah and Iis, Sopyan (2009) Synthesis SiO2-TiO2 powder and thin film photocatalyst through sol-gel. Indian journal chemistry A, 48 (7). pp. 951-957. (Unpublished)

Abd. Rahman, Mohamed and M. Nawawi, M. Kamarul Helmi (2011) Pultrusion of Pineapple Leaf Fibre (PALF)-reinforced vinyl ester composites: water absorption property. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 162-168. ISBN 9789674181598

Abd. Rahman, Mohamed and Mohd Salit, Sapuan and Abdan, Khalina (2010) Selected properties of hand-laid and compression molded pineapple leaf fiber (PALF)-reinforced vinyl ester composites. International Journal of Mechanical and Materials Engineering (IJMME), 5 (1). pp. 68-73. ISSN 1823-0334

Abd. Rahman, Mohamed and Salit, Mohd. Sapuan and Abdan, Khalina (2011) Effects of process parameters on selected properties of liquid compression-molded vinyl ester sheets. Pertanika Journal of Science and Technology, 19 (1). pp. 137-142. ISSN 0128-7680

Abdul Malek, Norun and Mohd. Ramly, Athirah and Abdullah Sidek, 'Atiah and Mohamad, Sarah Yasmin (2016) Characterization of acrylonitrile butadiene styrene material for a 3D printed microstrip patch antenna. In: 2016 International Conference on Electrical, Electronic, Communication and Control Engineering (ICEECC 2016), 18th-19th December 2016, Johor Bahru, Johor. (Unpublished)

Abdul Rahman, Julaila and Furuya, Shigeru and Kijima, Akira (2015) Car style recognition 1990-2010. In: 1st International Conference on Creative Media, Design & Technology 2014, 25 - 27 Nov 2014, Penang.

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi and Riza, Muhammad and Agusman, Delvis and ., Rosehan (2010) Tool life estimation model based on simulated flank wear during high speed hard turning. European Journal of Scientific Research, 39 (2). pp. 265-278. ISSN 1450-216X, 1450-202X

Adesta, Erry Yulian Triblas and Mohamad Ashraf, Asfana Banu and Abdul Rahman Azmil, Nur Atiqah (2011) Critical chain in project management. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 239-245. ISBN 9789674181598

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and ., Rosehan (2008) The Development of Cost Structure for High Speed Hard Turning. International Journal of Science Engineering and Technology, 1 (2). pp. 47-58. ISSN 1985-3785

Adesta, Erry Yulian Triblas and Riza, Muhammad and Ali, Mohammad Yeakub (2012) Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles. Applied Mechanics and Materials, 117-19. pp. 633-638. ISSN 1660-9336

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Ahmad, Fadli and Iis, Sopyan (2009) Preparation of porous alumina for biomedical applications through protein foaming-consolidation method. Materials Research Innovations, 13 (3). pp. 327-329. ISSN 1433-075X

Ahmad, S. H. and Rasid, Rozaidi and Surip, S. N. and Anuar, Hazleen and Czigany, T. and Abdul Razak, S. B. (2007) Mechanical and fracture toughness behavior of TPNR nanocomposites. Journal of Composite Materials, 41 (17). pp. 2147-2159. ISSN 0021-9983 (P), 1530-793X (O)

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) Effects of austempering treatment on mechanical properties of ductile iron. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 170-178. ISBN 9789674181598

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) The effect of deep cryogenic treatment on the properties of AISI D2 tool steel. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 286-293. ISBN 9789674181598

Akhtaruzzaman, Md and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Gait analysis: systems, technologies, and importance. Journal of Mechanics in Medicine and Biology, 16 (7). pp. 1-45. ISSN 0219-5194

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of new model for cutting force in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 145-152. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of tooling cost model in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 125-144. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, International Islamic University Malaysia, pp. 93-100. ISBN 9789674180232

Al-Ghamdi, Ahmed S. and Ali, Mohammad Yeakub (2012) Mechanical performance and water absorption resistance of HIPS/MWCNTs nanocomposite. Advanced Materials Research, 576. pp. 421-424. ISSN 1022-6680

Al-Ghamdi, Ahmed S. and Ali, Mohammad Yeakub (2012) Rheological and thermal behaviour of high impact polystyrene nanocomposite. Advanced Materials Research, 383. pp. 3849-3853. ISSN 1022-6680

Al-Khatib, Ma An Fahmi Rashid and Mohammed Abd, Rasha and Alam, Md Zahangir and Mohd. Salleh, Hamzah (2011) Enzymatic hydrolysis of oil palm empty fruit bunch using immobilized cellulase enzyme. African Journal of Biotechnology, 10 (81). pp. 18811-18815. ISSN 1684–5315

Alao, Abdur-Rasheed and Konneh, Mohamed (2011) Surface finish prediction models for precision grinding of silicon. International Journal Advances Manufacturing Technology, 58 (9). pp. 949-967. ISSN 0268-3768

Ali, Mohammad Yeakub (2011) Application of focused ion beam for machining of nanopillar sheet. Research Report. s.n. (Unpublished)

Ali, Mohammad Yeakub (2009) Development of micro end milling process for fabricating MEMS. Research Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Focused Ion Beam Nanomachining of Cell Culture Sheet (softcopy not yet available). In: Seminar on Focused Ion Beam Nanomachining of Cell Culture Sheet , 15 June 2011, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub (2008) Focused ion beam micromachining of mems. In: International Symposium on Advanced Mechatronics Engineering, 29 February 2008, Changwon, S. Korea.

Ali, Mohammad Yeakub (2008) Geometrical integrity of microholes produced by micro-EDM. Research Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2008) Micro-drilling of metallic materials for microsystems technology. Project Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Micro-manufacturing technology: the huge opportunity of thinking small. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China.

Ali, Mohammad Yeakub (2011) Nanopillar Array for Cell Culture Dish. In: Seminar Nanopillar Array for Cell Culture Dish, 16 June 2011, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub (2011) Noble tool based micromilling for nanometric surface finish. Research Report. Ministry of Higher Education, Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Powder mixed micro electro discharge machining (PMμEDM). Project Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2012) Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate. Advanced Materials Research, 383-. pp. 1759-1763. ISSN 1022-6680

Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2011) Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China. (Unpublished)

Ali, Mohammad Yeakub and Alif, M. and Irman, K. and Hajar, N. and Hayati, N. (2008) Investigation of burr formation in micro end milling. In: International Conference on Science and Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Haque, Md. Mohafizul (2007) Manufacturing engineering education in IIUM. In: Regional Conference on Engineering Education 2007 (RCEE 2007), 03-05 December 2007, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Khan, Ahsan Ali (2008) Microengineering education in IIUM: challenges and successes. In: International Conference on MEMS and Nanotechnology, ICMN'08, 13-15 May 2008, Saloma Bistro and Theatre Restaurant, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Mehfuz, R. and Najran, W. and Akif, M. (2008) Influence of micro end milling process parameters on surface roughness. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Ayob, Mohd Hafiz and Mohd Isa, Saiful Adzli (2005) Developing a prototype micro hot embossing setup. In: 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 30 September - 2 October 2005, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Bohez, E. L. J. (2000) Knowledge-based approach for stretch blow molding. In: International Conference on Precision Engineering (ICoPE) 2000, 21-23 March 2000, Singapore.

Ali, Mohammad Yeakub and Bryan, N. K. A. and Hung, W. N. P. and Alauddin, M. and Yuan, S. (2001) Surface roughness of ion-sputtered micromold. In: International Conference on Mechanical Engineering (ICME) 2001, 26-28 December 2001, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, N. P. (2001) Surface roughness of sputtered silicon. I. surface modeling. Materials and Manufacturing Processes, 16 (3). pp. 297-313. ISSN 1532-2475 (O), 1042-6914 (P)

Ali, Mohammad Yeakub and Hung, N. P. and Ngoi, B. K. A. and Yuan, S. (2003) Sidewall surface roughness of Sputtered Silicon 1: surface modelling. Surface Engineering, 19 (2). pp. 97-103. ISSN 0267-0844

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2001) Mathematical modeling of sputtering-induced surface roughness. In: International Symposium on Design, Test, Integration, and Packaging of MEMS / MOEMS 2001, 25-27 April 2001, Cannes, France.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2000) Simulation of micro-injection molding. In: International Conference on Precision Engineering (ICoPE) 2000, 21-23 March 2000, Singapore.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2001) Surface roughness of FIB sputtered silicon. In: Precision Engineering at the Beginning of a Millenium (ICPE), 18-20 July 2001, Yokohama, Japan.

Ali, Mohammad Yeakub and Hung, NguyenPhu (2001) Surface roughness of sputtered silicon. II. Model verification. Materials and Manufacturing Processes, 16 (3). pp. 315-329. ISSN 1042-6914

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2000) Fabrication of micro cavities by micro electrical discharged machining. In: International Conference on Manufacturing (ICM) 2000, 24-26 February 2000, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2000) Fabrication of three dimensional micro-components – A review. In: 6th Annual Paper Meet & International Conference on Mechanical Engineering in the 21st Century , 17-19 February 2000, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, Wayne N.P. and Fu, Yongqi (2010) A review of focused ion beam sputtering. International Journal of Precision Engineering and Manufacturing, 11 (1). pp. 157-170. ISSN 2005-4602 (O), 1229-8557 (P),

Ali, Mohammad Yeakub and Karim, A.N. Mustafizul and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Abdullah, 'Aisy Anuarin and Idris, Mohd Nazrol (2010) Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing, 11 (5). pp. 779-784. ISSN 2005-4602 (O), 1229-8557 (P),

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Mehfuz, R. and Aishah, S. and Hayati, N. and Hajar, N. (2008) Fabrication of micromold cavity for microreplication: A review. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Lim, BengHai (2006) Characterisation of surface texture using AFM with trimmed probe tip. Surface Engineering, 22 (6). pp. 443-446. ISSN 0267-0844

Ali, Mohammad Yeakub and Loo, Y. W. (2006) Sputtering of paraboloid microstructure using fib. In: International Conference on MEMS and Nanotechnology (ICMN'06), 15-16 March 2006 , Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Loo, Yee Wei (2007) Geometrical integrity of micromold cavity sputtered by FIB using multilayer slicing approach. Microsystems Technologies, 13 (1). pp. 103-107. ISSN 0946-7076

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, A. and N., Atiqah (2011) Investigation of tribological issues in microforming: a review. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, malaysia.

Ali, Mohammad Yeakub and Mass Duki, Siti Hamizah and Mansor, Noor Adila (2011) Minimum chip thickness in machining MEMS structure using Tool Based Micromilling. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and Mehfuz, R. (2008) Investigation of finish cut of micro electro discharge milling for nano surface finish. In: International Conference on nanoManufacturing (nanoMan2008), 13-16 July 2008, Singapore.

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Asfana, Banu and Roslan, Lutfi and Fahmi, M. I. (2012) Investigation of vibration and surface roughness in micro milling of PMMA. Applied Mechanics and Materials, 217/19. pp. 2187-2193. ISSN 1660-9336

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Fadila, N. and Hannah, N. (2013) Investigation of burr in high speed microdrilling. Applied Mechanics and Materials, 278. pp. 389-392. ISSN 1660-9336

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Khan, Ahsan Ali and Asfana, Banu and Lutfi, M. and Fahmi, M. I. (2013) Empirical modelling of vibration in micro end milling of PMMA. World Applied Sciences Journal , 21 (1). pp. 73-78. ISSN 1818-4952

Ali, Mohammad Yeakub and Mohammad, Ammar Sami (2008) Experimental study of conventional wire electrical discharge machining for microfabrication. Materials and Manufacturing Processes, 23 (7). pp. 641-645. ISSN 1042-6914

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Bio-MEMS Nanostructure by focused ion beam. In: International Conference on the Advancement of Materials and Nanotechnology, 29 Nov-1 Dec 2010, Prince Hotel, Kuala Lumpur.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: UNSPECIFIED.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of micropillar sheet for cell culture dish. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of silicon nanopillar sheet for Cell Culture Dish. Advanced Materials Research, 264. pp. 1352-1356. ISSN 1022-6680

Ali, Mohammad Yeakub and Mohd. Hajar, Nurul Hajar (2011) Fabrication of Micropillar Sheet for Cell Culture Dish. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and N.I, Rashidah and N.A, Azima (2007) Wire electrical discharge machining for microfabrication. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Ngoi, B. K. A. and Hung, N. P. and Yuan, S. and Lee, C.P. (2001) Hot embossing and injection molding of three-dimensional microcomponents. In: BSME-ASME International Conference on Thermal Engineering, 31 December 2001 - 02 January 2002, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Ngoi, Brian K. A. (2003) Mass-replication of micro-components. Forward. p. 6.

Ali, Mohammad Yeakub and Ong, A. S. (2006) Fabricating micromilling tool using wire electrodischarge grinding and focused ion beam sputtering. International Journal of Advanced Manufacturing Technology, 31 (5-6). pp. 501-508. ISSN 1433-3015 (O); 0268-3768 (P)

Ali, Mohammad Yeakub and Ong, A. S. and Konneh, Mohamed (2005) Micromilling of tungsten carbide using focused ion beam. In: International Conference on Mechanical Engineering 2005 (ICME2005), 28-30 December 2005, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Reyad, Mehfuz (2007) Design and fabrication of micro swiss-roll combustor mold by micro EDM milling. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 12-13 Dec. 2007, Culture Activity Centre (CAC), IIUM . (Unpublished)

Ali, Mohammad Yeakub and Reyad, Mehfuz and Khan, Ahsan Ali and Ismail, Ahmad Faris (2005) Micro Electro Discharge Milling for Microfabrication. In: Micromachining. In-Tech, Croatia, pp. 1-28. (In Press)

Ali, Mohammad Yeakub and Rosfazila, M. R. and Rosnita, E. (2008) Geometrical integrity of microholes drilled by conventional and micro electrical discharge machining. In: Advanced Design and Manufacture to Gain Competitive Edge. Springer, German, pp. 731-739. ISBN 9781848002401

Ali, Mohammad Yeakub and Willey, Liew Yun Hsien and Gure, S. A. and Asfana, Banu (2012) Influence of energy parameters of micro WEDM on kerf. Advanced Materials Research, 576. pp. 527-530. ISSN 1022-6680

Ali , Mohammad Yeakub and Abd. Rahman, Mohamed and Banu, Asfana and Adnan, Shakira and Nadia, Fatin (2016) High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014), 23rd-25th Nov. 2014, Cameron Highland, Pahang.

Alqap, Asep Sofwan F. and Iis, Sopyan (2009) Low temperature hydrothermal synthesis of calcium phosphate ceramics: effect of excess Ca precursor on phase behavior. Indian Journal Chemistry A, 48A. pp. 1492-1500. ISSN O975-0975

Alqap, Asep Sofwan F. and Iis, Sopyan and M. , Husni and N., Athirah (2012) The effects of calcium excess,water amount and mixing time on the injectability of calcium phosphate filling materials. Applied Mechanics and Materials, 110-16. pp. 8-12. ISSN 1660-9336

Amin, A. K. M. Nurul and -, Kok and Mahmud, Md. Asif (2011) Relative performances of preheating, cryogenic cooling and hybrid turning of stainless steel AISI 304. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 49-56. ISBN 9789674181758

Amin, A. K. M. Nurul and A., Abu and D. , Salha A. and S. , Salhana B. (2011) Influence of chatter on tool life during end milling of Aluminium and Aluminium alloy on vertical machining centre (VMC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 75-82. ISBN 9789674181758

Amin, A. K. M. Nurul and Azhari, A. and Mahmud, Md. Asif (2011) Chatter suppression in end milling of Titanium alloy Ti6Al4V applying permanent magnet clamped adjacent to the workpiece. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 107-115. ISBN 9789674181758

Amin, A. K. M. Nurul and Chong , Chee and -, Sayedatul Akma (2011) Effects of scribing wheel dimensions on LCD glass cutting. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 259-265. ISBN 9789674181758

Amin, A. K. M. Nurul and Dolah, Shuriani and Mahmud, Marlina and Lajis, M. A. (2008) Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2. Journal of Materials Processing Technology, 201 (1-3). pp. 466-470. ISSN 0924-0136

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2011) Machinability improvement in end milling of Titanium Alloy Ti-6Al-4V through preheating. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, 09-17. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Hafiz, A.M.K. and Lajis, M.A. and Patwari, Anayet U. (2010) Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel. Advanced Materials Research, 83-86. pp. 190-197. ISSN 1022-6680

Amin, A. K. M. Nurul and Hossain, Mohammad Ishtiyaq and Patwari, Anayet Ullah (2012) Enhancement of machinability of Inconel 718 in end milling through online induction heating of workpiece. Advanced Materials Research, 415-41. pp. 420-423. ISSN 1662-8985

Amin, A. K. M. Nurul and Ismail, Mohd Dali M and Musa, Muhammad Iqbal and Patwari, Anayet Ullah (2012) Prediction and investigation of surface quality in high speed end-milling of silicon to eliminate conventional finishing operations. Advanced Materials Research, 418-20. pp. 1237-1241. ISSN 1662-8985

Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul (2011) Heat assisted machining of hardened steel AISI D2. IIUM Press, Kuala Lumpur. ISBN 9789670225791

Amin, A. K. M. Nurul and Majed, A. Fakhruzi and Daud, M. K. and Patwari, Md Anayet Ullah and Ishtiyaq, M. H. (2011) Investigation of the machinability of Inconel 718 in room temperature and preheated conditions. Advanced Materials Research, 264-65. pp. 1187-1192. ISSN 1022-6680

Amin, A. K. M. Nurul and Mhd Jakin, Aiman and Husin, Hafiz and Mahmud, Md. Asif (2011) The effect of cryogenic cooling in machinability of stainless steel during turning. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 203-207. ISBN 9789674181758

Amin, A. K. M. Nurul and Mohd, Ahmad Azhari and Hadi, Abdul Qayyum (2011) The method of chatter suppression in end milling operation. In: IIUM Research, Invention and Innovation Exhibition 2011 (IRIIE 2011), 9-10 February 2011, Kuala Lumpur, Malaysia.

Amin, A. K. M. Nurul and Musa, Mohd Dali (2011) High speed end milling of single crystal silicon wafer. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-8111-5

Amin, A. K. M. Nurul and Nashron, F. R. and Zubaire, W. W. D. (2011) Role of the frequency of secondary serrated teeth in chatter formation during turning of carbon steel AISI 1040 and stainless steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 57-64. ISBN 9789674181758

Amin, A. K. M. Nurul and Syaban, M. and Mahmud, Md. Asif (2011) Elimination of burr formation during end milling of Polymethyl Methacrylate (PMMA) through high speed machining. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 233-237. ISBN 9789674181758

Anayet Ullah Patwari, Mohammed and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Role of chip serration frequency in chatter formation during end milling operation of stainless steel. Advanced Materials Research, 97-101. pp. 1989-1992. ISSN 1662-8985

Anayet Ullah Patwari, Mohammed and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2010) Investigations of formation of chatter in a non-wavy surface during thread cutting and turning operations. Advanced Materials Research, 83-86. pp. 637-645. ISSN 1022-6680

Anuar, Hazleen and Wan Busu, Wan Nazri and Ahmad, S. H. and Rasid, Rozaidi (2008) Reinforced thermoplastic natural rubber hybrid composites with Hibiscus cannabinus, L and short glass fiber – Part I: Processing parameters and tensile properties. Journal of Composite Materials, 42 (11). pp. 1075-1087. ISSN 0021-9983 (P), 1530-793X (O)

Ariff, Tasnim Firdaus and Azmi, Muhammad Firdaus and Iqbal, Mohammad (2014) Cost analysis of using hybrid microwave post-sintered aluminium oxide inserts. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 53-58. ISBN 9789699952074

Ariff, Tasnim Firdaus and Iqbal, Mohammad and Bahar, Rubina (2015) Cost analysis of using hybrid microwave post-sintered silicon nitride inserts. Advanced Materials Research, 1115. pp. 192-195. ISSN 1022-6680

B

Bagum, Nasima and Amin, A. K. M. Nurul and Konneh, Mohamed and Mohd Zaib, Noor Fathiah (2015) Multi-response optimizations for high speed ductile mode machining of soda lime glass. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17341-17350. ISSN 1819-6608

Bonnia, Noor Najmi and Kamaruddin, Mohd Shahril and Nawawi, M. H. and Ratim, Suzana and Hassan, Noor Azlina and Ali, E. S. (2016) Green biosynthesis of silver nanoparticles using ‘Polygonum hydropiper’ and study its catalytic degradation of methylene blue. Procedia Chemistry, 19. pp. 594-602. ISSN 1876-6196

C

C. M., Mardziah and Iis, Sopyan and Ramesh, Singh (2009) Strontium-doped hydroxyapatite nanopowder via sol-gel method : effect of strontium concentration and calcination temperature on phase behavior. Trends in Biomaterials and Artificial Organs, 23 (2). pp. 105-113. ISSN 0971-1198

Che Murad, Mardziah and Iis, Sopyan and Mohd, Reusmaazran and Che Hak, Rohaida and Zakaria, Ahmad and Mohd, Reusmaazran (2010) Fabrication and characterization of strontium-doped hydroxypatite bioceramics scaffolds for bone implant application: a preliminary study. Advanced Materials Research, 93-94. pp. 401-404. ISSN 1022-6680

E

Elhadie, Mohamed and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2011) Machining cost in conventional and hot machining: comparison and modelling. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-1703-9-5

F

Fadli, Ahmad and Sopyan, Iis and Ramesh, Singh (2012) Porous alumina from protein foaming-consolidation method containing hydrothermal derived hydroxyapatited powder. Applied Mechanics and Materials, 117-19. pp. 782-785. ISSN 1660-9336

Ferdosh, Sahena and Sarker, Md. Zaidul Islam and Nik Ab Rahman, Nik Norulaini and Oliveira, Alexandra and Yunus, Kamaruzzaman and Chowdury, Ahmed Jalal and Akanda, Jahurul H. and Omar, Mohd (2014) Quality of tuna fish oils extracted from processing the by-products of three species of neritic tuna using supercritical carbon dioxide. Journal of Food Processing and Preservation. ISSN 0145-8892

G

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2012) Cutting force and tool life models in end milling titanium alloy ti-4al-4v with thermally-assisted machining. International Journal of Mechanical Computational and Manufacturing Research, 1 (1). pp. 1-5. ISSN 2301-4148

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2010) Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining. LAP Lambert Academic Publishing, Germany. ISBN 978-3-8383-7307-2

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Che Daud, Mohd Radzi and Lajis, Mohd Amri (2009) Development of surface roughness models in end milling titanium alloy Ti-6Al-4V using uncoated tungsten carbide inserts. European Journal of Scientific Research, 28 (4). pp. 542-551. ISSN 1450-216X, 1450-202X

Ginta, Turnad Lenggo and Lajis, Mohd Amri and Amin, A. K. M. Nurul (2009) The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating. American Journal of Engineering and Applied Sciences, 2 (1). pp. 147-153. ISSN 1941-7020

H

Haque, Md. Mohafizul and Ismail, Ahmad Faris and Alias, Tuti Yasmin (2009) Selection of materials and manufacturing processes for green engineering. In: International Conference on Advances on Materials and Processing Technologies( AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Helmi, Irfan (2011) Numerical analysis to characterize triaxiality value of adhesive joint due to particular load configuration. Part 1: butt joint. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 194-201. ISBN 9789674181598

Helmi, Irfan (2011) Numerical analysis to characterize triaxiality value of adhesive joint due to particular load configuration. Part 2: cleavage and scarf joint. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 202-211. ISBN 9789674181598

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2011) Assessment of performance of uncoated and coated carbide inserts in end milling of Ti-6Al-4V through modelling. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 195-202. ISBN 9789674181758

Hossain, Mohammad Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2008) Comparison of uncoated and coated carbide inserts in end milling of Ti–6Al–4V in terms of surface roughness. International Journal of Materials Processing Technology. (In Press)

Hossain, Muhammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Karim, A. (2008) Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 320-326. ISSN 1734-8412

Hrairi, Meftah and Baharom, Badrul Hanafi (2011) Design and modeling of silicon MEMS accelerometer. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hrairi, Meftah and Chtourou, Hedi (2010) Predicting density distribution in green compacts using finite element simulations. In: International Conference on Mathematical Applications in Engineering (ICMAE’10), 3 - 4 Aug, 2010, Kuala Lumpur.

Hrairi, Meftah and Echrif, Salah B. M. (2011) Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hung, N. P. and Ali, Mohammad Yeakub and Yuan, S. (2000) Producing LIGA-competitive microcomponents. In: International Conference on Micromachining and Microfabrication Process Technology VI 2000, 22-25 October 2000, California, USA.

Hung, N. P. and Yuan, S. and Lee, E. C. W. and Ali, Mohammad Yeakub (2001) Development of a micromolding process. In: International Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2001, 25-27 April 2001, Cannes, France.

Hung, NguyenPhu and Ali, Mohammad Yeakub and Fu, Yongqi and Ong, NanShing and Tay, MengLeong (2001) Surface integrity and removal rate of silicon sputtered with focused ion beam. Machining Science and Technology, 5 (2). pp. 239-254. ISSN 1091-0344

Hung, NguyenPhu and Fu, Yongqi and Ali, Mohammad Yeakub (2002) Focused ion beam machining of silicon. Journal of Materials Processing Technology, 127 (2). pp. 256-260. ISSN 0924-0136

Hung, W. N. P. and Agnihotri, M. M. and Ali, Mohammad Yeakub and Yuan, S. (2006) Molding of three-dimensional microcomponents. In: International Conference on Manufacturing Science and Engineering, 8-11 October 2006, Michigan, USA.

Hung, W. N. P. and Ngothai, Y. and Yuan, S. and Lee, C. W. and Ali, Mohammad Yeakub (2001) Micromolding of three-dimensional components. In: Precision Engineering at the Beginning of a Millenium (ICPE), 18-20 July 2001, Yokohama, Japan.

I

Ibrahim, Kader and Chik, Mohd Azizi and Nizam, Wan Shamsir and Nyioh, Li Fem and Za'bah, Nor Farahidah (2003) Efficient lot batching system for furnace operation. In: Advanced Semiconductor Manufacturing Conference (2003 IEEEI/SEMI), 31 March-1 April 2003 , Munich, Germany.

Iis, Sopyan and A.N., Natasha (2009) Preparation of nano-structured manganese doped-biphasic calcium phosphate powders via sol-gel method. IONICS (Spinger), 15. pp. 735-741. ISSN 1862-0760

Iis, Sopyan and Jasminder, Kaur (2009) Preparation and characterization of porous hydroxyapatite through polymeric sponge method. Ceramics International, 35 (8). pp. 3161-3168. ISSN 0272-8842

Iis, Sopyan and Singh, Ramesh and Nawawi, Natasha Ahmad and Anna, Tampieri and Simone, Sprio (2011) Effects of manganese doping on the dielectric properties of titanium dioxide ceramics. Ceramics International, 37 (8). pp. 3703-3715. ISSN 0272-8842

Iqbal, A. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2011) Designing human robot interaction for emotionally expressive robotic head AMIR-iii. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 32-37. ISBN 9789674181529

Iqbal, Mohammad (2011) Metabolic energy of manual lifting in manufacturing industry. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 213-219. ISBN 9789674181598

Izman, S. and Abdul-Kadir, Mohammed Rafiq and Anwar, Mahmood and Nazim, E. M. and Khor, E. K. and Konneh, Mohamed (2010) Effect of pickling and mechanical surface treatment methods on adhesion strength of Ti oxide layer formed on Titanium alloy substrate. In: 2010 34th IEEE/CPMT InternationalElectronic Manufacturing Technology Symposium (IEMT), 30th Nov - 2nd Dec 2010, Melaka, Malaysia.

K

K. L., Aw and Ranna, Tolouei and Singh, Ramesh and Tan, Chou Yong and W,, H. Yeo and H., Kelvin and Iis, Sopyan and Teng, Wan Dung (2011) Effects of powder synthesis method on the sinterability of hydroxyapatite. Advanced Materials Research, 264/5. pp. 1538-1544. ISSN 1022-6680

Kamarudin, Mohd Hider and Mel, Maizirwan and Abdulkarim, Mohd Ismail (2011) Optimizing bioethanol production from sago starch in bioreactor for renewable energy. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 59-70. ISBN 9789674181635

Karim, A.N. Mustafizul and Abd. Rahman, Mohamed and Hj. Yusop, Nornilawati (2014) Mitigation of WIP-related problems at an IC production line through a suitable inspection sampling plan. In: International Conference on Industrial Engineering and Operations Management, 7th-9th Jan. 2014, Bali, Indonesia.

Karim, A.N. Mustafizul and Azon, Nurul Husna (2011) Value stream mapping: an important footstep for value analysis and value engineering. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 223-230. ISBN 9789674181598

Karim, A.N. Mustafizul and Lajis, M.A. and Amin, A. K. M. Nurul (2011) Multi-criteria optimization in end milling of AISI D2 hardened steel using coated carbide inserts. Advanced Materials Research, 264-65. pp. 907-912. ISSN 1662-8985

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734

Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Application of silicon carbide in abrasive water jet machining. In: Silicon Carbide. InTech, pp. 431-452. ISBN 9789533079684

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining. International Journal of Mechanical Engineering, 7 (1). pp. 81-90. ISSN 1823-5514

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2008) Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: International Conference on Mechanical and Manufacturing (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Khan, Md. Ashikur Rahman and Rahman, Mohammad Mustafizur and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. World Academy of Science, Engineering and Technology, 74. pp. 198-202. ISSN 1307-6884

Konneh, Mohamed (2016) Precision surface grinding of silicon carbide. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 51-58.

Konneh, Mohamed and -, Abdul Halim (2011) Surface study when finish grinding silicon using resin bonded diamond cup wheel. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 257-263. ISBN 9789674181598

Konneh, Mohamed and Amin, A. K. M. Nurul and Afzeri, Afzeri and Ahmarofi, A. A. (2009) Development of a low cost lapping process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Konneh, Mohamed and Ghazali, Abdul Halim (2011) Engineering project management in automotive industry. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 247-253. ISBN 9789674181598

Konneh, Mohamed and Izman, S. and Ali, Mohammad Yeakub (2006) An investigation on morphology of hard-brittle silicon surface by diamond grinding. In: International Conference on Manufacturing Science and Technology (ICOMAST 2006), 28-30 August 2006, Melaka, Malaysia.

Konneh, Mohamed and Mukhtar, Muhammad (2011) Surface roughness studies in die-sink EDM of tungsten carbide using copper tungsten electrode. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 264-271. ISBN 9789674181598

Konneh, Mohamed and Shad, Nur Jannah and Saharudin, Noor Fazlin (2011) Study of the effect of different electrodes on material removal rate, electrode wear rate and surface roughness in the EDM of S-STAR. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 272-278. ISBN 9789674181598

L

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2008) Preheated machining in end milling of hardened steel AISI D2. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 November 2008, Gold Coast, Australia.

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions. Advanced Materials Research, 264-65. pp. 901-906. ISSN 1662-8985

M

M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) Performance of uncoated WC-Co in end milling of Aluminium Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 255-260. ISBN 978-967-418-175-8

M.A., Maleque and M.M., Rahman and Khalaf I., Hamada and M.M., Noor and K., Kadirgama and Rosli , A. Bakar and R.A., Bakar (2010) Heat transfer characteristics of intake port spark ignition engine: a comparative study. Journal of Applied Sciences, 10 (18). pp. 2019-2026. ISSN 1812-5662 (O), 1812-5654 (P)

M.M., Rahman and A.K., Ariffin and M.M., Noor and A.B., Rosli and M.A., Maleque (2009) Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp. 715-725. ISSN 1546-9239

Mahmood, Mahmood Hameed and Adesta, Erry Yulian Triblas (2011) The project management challenges in technology innovation. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 231-237. ISBN 9789674181598

Maleque, Md. Abdul (2011) Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and A., Atiqah and R. J., Talib and Halim, Zahurin (2011) New natural fibre reinforced composite brake friction material. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and A. R., Zamani and R. J., Talib (2011) Tribological study of A1 based natural fibre reinforced composite brake pad materials. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and Abdullah, Umma and Yaacob, Iskandar Idris and Ali, Yousaf (2016) Characterization of ball-milled carbon nanotube dispersed aluminum mixed powders. In: 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3), 6th-10th October, 2014, Miskolc-Lillafüred, Hungary.

Manshor, R.M and Anuar, Hazleen and Wan Busu, Wan Nazri and M.I, Ahmad Fitrie (2012) Preparation and characterization of physical properties of Durian skin fibers biocomposite. Advanced Materials Research, 576. pp. 212-215. ISSN 1022-6680

Mat Noor, Muhamad and A/L Kadirgama, Kumaran and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Prediction of recycle method using relevance vector machine. Advanced Materials Research , 264. pp. 943-948. ISSN 1022-6680

Mat Noor, Muhamad and Kadirgama, K. and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Pattern recognition method to predict recycling strategy for electronic equipments. Advanced Materials Research, 264-. pp. 949-955. ISSN 1022-6680

Md. Sazib Mollik, Sazib and Hasan, Muhammad Hasibul and IRUM Tariq, Irum (2015) Structural applications and emerging trends of nano- and biocomposites: a review. Advanced Materials Research, 1115. pp. 345-348. ISSN 1662-8985

Mehfuz, R. and Ali, Mohammad Yeakub (2007) Surface roughness analysis of beryllium-copper alloy in micro end milling. In: International Conference on Mechanical Engineering (ICME 2007), 29-31 December 2007, Dhaka, Bangladesh.

Mel, Maizirwan and Muhammad Nadzri, Husna and Kamaruddin, Mohd Hider and Abdulkarim, Mohd Ismail (2011) The effect of saccharification process of sago starch into sugar. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 71-77. ISBN 9789674181635

Mel, Maizirwan and Muhammad Nadzri, Husna and Kamarudin, Mohd Hider and Abdulkarim, Mohd Ismail (2011) Bioethanol production from sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 41-58. ISBN 9789674181635

Moe Win@Shamsudin, Thein and Salami, Momoh Jimoh Eyiomika and Martono, Wahyudi (2007) RFID-based intelligent books shelving system. In: 2007 1st Annual RFID Eurasia, 5-6 Sep 2007, Istanbul.

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) The effect of stucco system in ceramic shell investment casting. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 139-149. ISBN 9789674181598

Mohamed, Abd. Rahman and Asfana, Banu and Ali, Mohammad Yeakub (2014) Investigation of recast layer of non-conductive ceramic due to micro-EDM. Advanced Materials Research, 845. pp. 857-861. ISSN 1022-6680

Mohamed, Abd. Rahman and Atiqah, N. and Ali, Mohammad Yeakub and Chowdhury, M. S. H. (2013) Tool vibration due to high speed micro end milling parameters. Applied Mechanics and Materials, 372. pp. 364-368. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus (2011) Microwave sintering of ceramic materials. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 185-191. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus (2011) Microwave sintering of metallic materials. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 179-184. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of copper and antimony on the mechanical properties of pewter alloys made by conventional and microwave powder sintering. In: 4th International Conference on Recent Advances in Materials, Minerals & Environment and 2nd Asian Symposium On Materials & Processing (RAMM & ASMP 2009), 1-3 June 2009, Penang, Malaysia.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of powder sintering method on the densification and microstructure of pewter alloys. In: Processing, Microstructure and Performance of Materials, 8–9 April 2009, Auckland, New Zealand.

Mohamed Ariff, Tasnim Firdaus and Zakaria, Zairul Azrul (2015) Enhanced heating mechanism of the electric metal melting furnace in traditional foundry. ARPN Journal of Engineering and Applied Sciences, 10 (1). pp. 9659-9663. ISSN 1819-6608

Mohammad, Amar Sami and Ali, Mohammad Yeakub (2006) Polymeric micro-fluidic channel by hot embossing. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 5-6 Dec 2006, Culture Activity Centre (CAC), IIUM . (Unpublished)

Mohammad, Ammar Sami and Ali, Mohammad Yeakub (2006) Fabricating hot embossing micro tool using electrodischarge machining. In: International Conference on Manufacturing and Materials Processing 2006, 14-16 March 2006, Kuala Lumpur, Malaysia.

Mohd Ali, Afifah and Adesta, Erry Yulian Triblas (2011) Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 81-92. ISBN 9789674180232

Mohd Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2011) Investigation of microholes produced by focused ion beam micromachining. Advanced Materials Research, 264. pp. 1346-1351. ISSN 1022-6680

Mohd Shahar, Siti Fatimah and Jaafar, Israd Hakim and Ali, Mohammad Yeakub (2015) Parametric study of sputtering microchannels via focused ion beam (FIB). ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17397-17401. ISSN 1819-6608

Mohd. Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2010) Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering. Series 1 . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia, pp. 92-97.

Mohd. Noor, Mazni and Careem, M. A. and Majid, Siti Rohana and Arof, Abdul Kariem (2011) Characterisation of plasticised PVDF–HFP polymer electrolytes. Materials Research Innovations, 15 (supp.2). S2-157. ISSN 1433-075X

Moudood, M. A. and Sabur, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Effect of peak current on material removal rate for electrical discharge machining of non-conductive Al2O3 ceramic. Advanced Materials Research, 845. pp. 730-734. ISSN 1022-6680

Moudood, M. A. and Sabur, A. and Lutfi, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Investigation of the machinability of non-conductive zro2 with different tool electrodes in EDM. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1866-1876. ISSN 1985-9385 (P) 2180-1606(O)

Mridha, Shahjahan and Md. Idriss, A. N. and Maleque, Md. Abdul and -, Suryanto and Mohamad, Souad A. (2011) Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Mushtaq, Umer and Adesta, Erry Yulian Triblas (2011) Effect of welding process on formability of tailor welded blanks. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 294-306. ISBN 9789674181598

Mustafa, Yusri and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2015) Low temperature solder alloys for ultrasonic soldering of glass. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9717-9722. ISSN 1819-6608

N

Nordin, Norhuda Hidayah and Ahmad, Zuraida and Omar, Nurizan and Alias, Tuti Yasmin (2011) Comparative study between standard and commercial sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 17-26. ISBN 9789674181635

Nuruzzaman, D. M. and Nakajima, A. and Mawatari, T. and Ali, Mohammad Yeakub (2007) Durability and tribological properties of thermally sprayed wc cermet coating under lubricated rolling-sliding contact. IIUM Engineering Journal, 8 (1). pp. 49-62. ISSN 1511-788X

O

Omar, Mohd Afian and Subuki, Istikamah and Abdullah, Nor Syakira and Alias, Tuti Yasmin (2011) Feedstock preparation of injection moulded stainless steel using biodegradable starch binder. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 79-86. ISBN 9789674181635

Omar, Nurizan and ., Nur Humairah and Mohd Hatta, Maziati Akmal and Ahmad, Zuraida (2011) Sago, its properties and applications: a review. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 1-15. ISBN 9789674181635

Omar, Nurizan and Ishak , Norazah and Ahmad, Zuraida (2011) Sago starch: nanoclay biocomposites film. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 87-99. ISBN 9789674181635

Omar, Nurizan and Nordin, Norhuda Hidayah and Halim, Zahurin (2011) Preliminary study on superabsorbent polymer hydrogel from sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 115-128. ISBN 9789674181635

P

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Alam, Md. Shah (2011) Improvement of surface roughness in end milling of Ti6Al4V by coupling RSM with genetic algorithm. Advanced Materials Research, 264/65. pp. 1154-1159. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology. Journal of Mechanical Engineering, 40 (2). pp. 95-103. ISSN 0379-4318

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodology approach for chip serration Frequency Prediction in milling. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 1433-3015 (O); 0268-3768 (P) (In Press)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference, 15 - 17 December 2008, Chennai, India.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and Farahain, S (2009) Chip serration frequency-the primary cause of chatter during end milling operation. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ginta, Turnad Lenggo and Alam, S. and Lajis, M. A. (2008) Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008), 24 - 27 November 2008, Sarawak, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2008) Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008), 21-23 May, 2008, Johor Baru, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Sharulhazrin, M. S. and Hafizzudin , I (2010) A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45). In: International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010, 17-19 March, 2010, Hong Kong.

R

Rahman, Md. Mustafizur and Khan, Md. Ashikur Rahman and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach. In: Computers and simulation in modern science. Computers and simulation in modern science, V (Vol.5). WSEAS Press, pp. 107-113. ISBN ISBN: 978-960-474-300-1, ISSN: 1762-6882

Rahman Azmil, Nur Atiqah and Jaafar, Israd Hakim and Ali, Mohammad Yeakub and Asfana, Banu (2012) Application of focused ion beam micromachining: a review. Advanced Materials Research, 576. pp. 507-510. ISSN 1022-6680

Ranna, Tolouei and C.Y., Tan and S., Ramesh and Iis, Sopyan and W.D., Teng (2011) Effect of nano silica on the sinterability of hydroxyapatite dense bodies. Advanced Materials Research, 2634-5. pp. 1832-1838. ISSN 1022-6680

S

S., Ramesh and C.Y., Tan and Ranna, Tolouei and M., Amiriyan and J. , Purbolaksono and Iis, Sopyan and W.D., Teng (2012) Sintering behaviour of hydroxyapatite prepared from different routes. Materials and Design, 34. pp. 148-154. ISSN 0261-3069

Saad , Siti Asmahani and Abdul Aziz, Farah Nora Aznieta and Ali, Maisarah (2014) Effect of tropical climate condition to compressive strength and microstructure properties of High Performance Fiber Reinforced Concrete (HPFRC). In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Sabur, Abdus and A., Moudood and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. IOP Conference Series: Materials Science and Engineering, 53 (2013). pp. 1-5. ISSN 1757-8981

Sabur, Abdus and Ali, Mohammad Yeakub (2011) Kerf in micro wire electro discharge machining. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 279-285. ISBN 9789674181598

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Khan, Ahsan Ali (2013) Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic. Procedia Engineering, 56. pp. 696-701. ISSN 1877-7058

Sahari, Japar and Sapuan, Mohd Salit and Zainudin, Edi Syams and Maleque, Md. Abdul (2014) Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences, 11 (1). pp. 1836-1840. ISSN 1546-9239

Saleh, Tanveer and Bahar, Rubina (2017) ELID grinding and EDM for finish machining. In: Comprehensive materials finishing. Reference module in materials science and materials engineering, 1 . Elsevier Inc., pp. 364-407. ISBN 978-0-12-803249-7

Sara Lee, K.Y and Christopher Chin, K.M., and Ramesh, Singh and Tan, Chou Yong and Teng, Wan Dung and Sopyan, Iis (2012) Characterization of forsterite bioceramics. In: International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2012, 3 - 5 July 2012 , Kuala Lumpur; Malaysia.

Sarifuddin, Norshahida and Ismail , Hanafi and Ahmad, Zuraida (2011) Preparation and characterization of glycerol plasticized sago starch-Kenaf core fibers biocomposites. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 101-114. ISBN 9789674181635

Seeni Mohamed, Nurhafizah and Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Optimization of kenaf biomass's pre-treatment for polylactic acid's monomer production. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 111-120. ISBN 9789674180218

Shah, Qasim Hussain and Homma, H. (1995) Fracture criterion of materials subjected to temperature gradient. International Journal of Pressure Vessels & Piping, 62 (1). pp. 59-68. ISSN 0308-0161

Shuriye, Abdi Omar and Che Daud, Mohd Radzi and Mat Song, Rusdi and Ismail, Mohd Azhar (2009) Islamic values on ISO 9001-2000 certified companies in Malaysia. In: Religious and ethical worldviews on engineering standards. Islamic Centre for Education, Research and Development, Australia, pp. 105-177. ISBN 9890479

Singh, Ramesh and Ranna, Tolouei and Tan, Chou Yong and K. L., Aw and W., H. Yeo and Iis, Sopyan and Teng, Wan Dung (2011) Sintering of hydroxyapatite ceramic produced by wet chemical method. Advanced Materials Research, 264/65. pp. 1856-1861. ISSN 1022-6680

Sopyan, Iis and Ahmad, Fadli (2012) Floating porous alumina from protein foaming-consolidation technique for cell culture application. Ceramics International, 38. pp. 5287-5291. ISSN 0272-8842

Sopyan, Iis and Fadli, Ahmad and Mel, Maizirwan (2012) Porous alumina–hydroxyapatite composites through protein foaming–consolidation method. Journal of the Mechanical Behavior of Biomedical Materials, 8. pp. 86-98. ISSN 1751-6161

Sopyan, Iis and Ramesh, Singh and Hamdi, Mohamed Salah (2008) Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry, 47 (11). pp. 1626-1631. ISSN 0376-4710

Sutjipto, Agus Geter Edy and Kaderi, Akbar (2011) Sample preparation on ceramics composite for cutting tools in high speed machining. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 61-79. ISBN 9789674180232

Syed Abu Bakar, Sharifah Adzila and Iis, Sopyan and Abd Shukor, Mohd Hamdi (2012) Mechanochemical synthesis of hydroxyapatite nanopowder: Effects of rotation speed and milling time on powder properties. Applied Mechanics and Materials, 110-16. pp. 3639-3644. ISSN 1660-9336

T

Tan, Chou Yong and Singh, Ramesh and Ranna, Tolouei and Iis, Sopyan and Teng, Wan Dung (2011) Synthesis of high fracture toughness of hydroxyapatite bioceramics. Advanced Materials Research, 264/5. pp. 1849-1855. ISSN 1022-6680

Toque, Jay Arre and M., Hamdi and A., Ide-Ektessabi and Iis, Sopyan (2009) Effect of the processing parameters on the integrity of calcium phosphate coatings produced by RF-magnetron sputtering. International Journal of Modern Physics B, 23 (31). pp. 5811-5818. ISSN 0217-9792 ; 1793-6578

Turahim, Khairiah K. and Abdul Muthalif, Asan Gani and Ab Rahim, Syazwani (2012) Design and fabrication of active vibration isolation system for free space optics communication. Advanced Materials Research, 576. pp. 753-756. ISSN 1022-6680

W

W., H. Yeo and Singh, Ramesh and Tan, Chou Yong and Aw, K. L. and Ranna, Tolouei and H., Kelvin and Iis, Sopyan and Teng, Wan Dung and Hoque, Md Enamul (2011) Effects of bismuth oxide on the properties of calcium phosphate bioceramics. Advanced Materials Research, 264/5. pp. 1839-1848. ISSN 1022-6680

Wan Yusoff, Wan Ahmad Yusmawiza and A. Nasir, Safwa and Ahmad, Wan Mohamad Hakimi (2011) Investigation of the effect of “Orange Peel” surface texture on the laser sintered part. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011) , 25–28 September 2011, Langkawi, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Azrai, Muhammad and Mohamad, Ahlam Hadi (2014) Improving the design of peripheral IV therapy by employing product development approach and rapid prototyping technology. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10 -11 April 2014, Seoul; South Korea.

Wan Yusoff, Wan Ahmad Yusmawiza and Fakhrani, Muhammad and Fairus, Mohd and Adesta, Erry Yulian Triblas (2011) The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE). In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Hayyun, Muhammad Fakhrani and Abdullah, Mohd Fairus (2011) The study of the implementation of OHSAS: 18001 at Kulliyyah of Engineering. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 113-120. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Nasir, S. A. and Ahmad, W. M. H. and Adesta, Erry Yulian Triblas (2011) Investigation of the effect of "Orange Peel" surface texture on the laser sintered part. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Saloh, Azmil (2011) Implementation of FMECA on Computer Integrated Manufacturing (CIM). In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 129-135. ISBN 9789674181598

Y

Yuan, Shu and Hung, NguyenPhu and Ngoi, Bryan Kok Ann and Ali, Mohammad Yeakub (2003) Development of Microreplication Process - Micromolding. Materials and Manufacturing Processes, 18 (5). pp. 731-751. ISSN 1042-6914

Yuan , S. and Ngoi, B. K. A. and Hung, N. P. and Ali, Mohammad Yeakub (2004) Fabrication of microcomponents by injection molding. In: International Conference on Precision Engineering (ICoPE) 2003/04, 02-05 March 2004, Singapore.

Yusof, Yusliza and Halim, Zahurin (2011) Albumen-thermoplastic sago starch reinforeced cotton: agro-green composites. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 27-40. ISBN 9789674181635

Z

Za'bah, Nor Farahidah and Kwa, Kelvin S. K. and O'Neill, Anthony (2013) Optimization of the process modules for a top-down silicon nanowire fabrication using optical lithography and orientation dependent etching. Advanced Materials Research, 629. pp. 115-121. ISSN 1022-6680

This list was generated on Sun Nov 19 14:39:33 2017 +08.