IIUM Repository (IREP)

Items where Subject is "T Technology > TS Manufactures > TS200 Metal manufactures. Metalworking"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Jump to: | A | B | E | G | H | I | J | K | M | N | O | P | R | S | T | W | Z
Number of items at this level: 203.

, Afzeri and M. S., Shahdan and Hussain Shah, Qasim (2011) Effect of addendum parameters to the formability of aluminum AL 6303. Advanced Materials Research, 264. pp. 206-211. ISSN 1022-6680

A

A.K.M, Asif Iqbal and Khan, Ahsan Ali (2011) Optimization of process parameters on EDM milling of stainless steel AISI 304. Advanced Materials Research, 264-65. pp. 979-984. ISSN 1022-6680

A.K.M, N. Amin and Rizal, M. A. and Razman , M. (2001) Influence of chatter of VMC arising during end milling operation and cutting conditions on quality of machined surface. IIUM Engineering Journal, 2 (1). pp. 29-38. ISSN 1511-788X

A.K.M., N. Amin and A. K., Sardar (1997) Investigation of the influence of the properties of the work and tool materials on performance level of Electrical Discharge Machining (EDM) process. In: Advances in Materials and Processing Technologies. n.p., pp. 616-623.

A.K.M., Nurul Amin and Abraham, Irwan and Nor, Khairusshima and Ahmed, Mirghani Ishak (2007) Influence of preheating on performance of circular carbide inserts in end milling of carbon steel. Journal of Materials Processing Technology, 185 (1-3). pp. 97-105. ISSN 0924-0136

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Khairuddin, Amir Saddam (2017) Effects on vibration and surface roughness in high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Rosli, Abdul Rahman Shah and Banu, Asfana (2017) Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abdulkareem, Suleiman and Khan, Ahsan Ali and Konneh, Mohamed (2010) Cooling effect on electrode and process parameters in EDM. Materials and Manufacturing Processes, 25 (6). pp. 462-466. ISSN 1532-2475 (O), 1042-6914 (P)

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on material migration among the electrodes during EDM of titanium alloy. Advanced Materials Research, 264-65. pp. 1199-1204. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on material migration among the electrodes during edm of titanium alloy. Advanced Materials Research, 264-65. pp. 1199-1204. ISSN 1662-8985

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on recast layers and micro crack in EDM of titanium. Advanced Materials Research, 264-65. pp. 1180-1186. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2009) Reducing electrode wear ratio using cryogenic cooling during electrical discharge machining. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1146-1151. ISSN 1433-3015 (O); 0268-3768 (P)

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohd Zain, Zakaria (2011) Effect of machining parameters on surface roughness during wet and dry Wire-EDM of stainless steel. Journal of Applied Sciences. pp. 1-5. ISSN 1812-5662 (O), 1812-5654 (P)

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohd Zain, Zakaria (2011) Experimental investigation of machining parameters on surface roughness in dry and wet wire-electrical discharge machining. Advanced Materials Research, 264/5. pp. 831-836. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Shah, Qasim Hussain and Konneh, Mohamed (2017) Temperature distribution in copper electrode during electrical discharge machining process. International Journal of Integrated Engineering, 9 (1). pp. 39-43. ISSN 2229-838X

Abdulmumin, Adebisi Adetayo and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2015) Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite. Advanced Materials Research, 1115. pp. 174-177. ISSN 1022-6680

Adebisi, Adetayo A. and Maleque, Md. Abdul and Ali , Mohammad Yeakub and Bello, Kamilu Adeyemi (2015) Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites. In: Malaysian International Tribology Conference 2015, 16th-17th Nov. 2015, Penang, Malaysia.

Adelek, S.A. and Maleque, Md. Abdul (2014) TIG melted surface modified titanium alloy for automotive cylinder liner application. In: International Conference on Advanced Technology & Sciences (ICAT’14), 12th-15th August 2014, Antalya, Turkey.

Adeleke, S.A. and Maleque, Md. Abdul (2015) Surface features of TIG melting coated CP-titanium. Advanced Materials Research, 1115. pp. 234-237. ISSN 1022-6680

Adeleke, S.A. and Maleque, Md. Abdul (2014) Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures. Advanced Materials Research, 1024. pp. 207-210. ISSN 1022-6680

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) Machining Time Simulation in High Speed Hard Turning. Advanced Materials Research , 264-5. pp. 1102-1106. ISSN 1022-6680

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) Tool life in high speed turning with negative rake angle. Advanced Materials Research, 264. pp. 1009-1014. ISSN 1662-8985

Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Muhammad, Riza and Suprianto, Mohamad Yuhan (2010) A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13. American Journal of Applied Sciences , 7 (10). pp. 1420-1425. ISSN 1554-3641(O), 1546-9239 (P)

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and Agusman, Delvis and Yahuza, Rosehan (2009) Tool wear and surface finish investigation in high speed turning using cermet insert by applying negative rake angles. European Journal of Scientific Research, 38 (2). pp. 180-188. ISSN 1450-216X, 1450-202X

Al Hazza, Muataz and Adesta, Erry Yulian Triblas and Superianto, M. Y. and Riza, Muhammad (2012) Cutting temperature and surface roughness optimization in CNC end milling using multi objective genetic algorithm. In: 2012 International Conference on Advanced Computer Science Applications and Technologies, ACSAT 2012, 26 - 28 November 2012, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Flank Wear Modeling in High Speed Hard Turning by using artificial Neural Network and Regression Analysis. Advanced Materials Research , 264-5. pp. 1097-1101. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) New approach in cost structuring of high speed hard turning. Advanced Materials Research, 264-26. pp. 1003-1008. ISSN 1662-8985

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Suprianto, Mohamad Yuhan (2011) Energy cost modeling for high speed hard turning. Journal of Applied Sciences, 11 (14). pp. 2578-2584. ISSN 1812-5662 (O), 1812-5654 (P)

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-5. ISSN 1757-899X

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-5. ISSN 1757-899X

Al Hazza, Muataz Hazza Faizi and Mohammed , Baba Ndaliman and Mohammad , Yeakub Ali and Khan, Ahsan Ali (2015) Analyzing the influence of electrical parameters on EDM process of Ti6Al4V alloy using Adaptive Neuro-fuzzy Inference System (ANFIS). International Review of Mechanical Engineering, 9 (3). pp. 237-241. ISSN 1970-8734

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Nordin, Rosmarina (2017) Micro wire electro discharge grinding: optimization of material removal rate and surface roughness. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Zunairi, Siti Nur Zuhaida and Banu, Asfana (2017) Dimensional accuracy of micro-electro discharge milling. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Khamarruzaman, Siti Nur Zalikha and Banu, Asfana (2017) Investigation of kerf in micro wire electro discharge machining. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Mohamad Asharaf, Asfana Banu and Abdul Wahab, Adibah (2012) Prediction of minimum chip thickness in tool based micro end milling. International Journal of Integrated Engineering, 4 (1). pp. 6-10. ISSN 2229-838X

Amin, A. K. M. Nurul (1993) Criteria for determining machinability and techniques of improving machinability of steel and alloys. In: Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT '93), 24 - 27 August 1993.

Amin, A. K. M. Nurul (1985) Influence of the characteristics of Machine-Tool-Fixture-Work (MTFW) system on chatter. Journal of the Institutional Engineers, 13 (4). pp. 11-16.

Amin, A. K. M. Nurul (1992) Influence of work material, cutting conditions and rigidity of tool holders on machine tool chatter. In: Proceedings of the International Conference on Engineering Applications of Mechanics, 9 - 12 June 1992, Tehran, Iran.

Amin, A. K. M. Nurul (1983) Investigation of the mechanism of chatter formation during metal cutting process. Mechanical Engineering Research Bulletin, 6 (1). pp. 11-18.

Amin, A. K. M. Nurul and A. l., Kurchenko and N. P., Talantov (1984) Investigation of the physical causes of improved machinability of steel alloyed with calcium. Mechanical Engineering Research Bulletin, 7 (1). pp. 9-16.

Amin, A. K. M. Nurul and Abdelgadir , M. (2003) The effect of preheating of work on chatter during end milling of medium carbon steel performed on a Vertical Machining Center (VMC). Journal of Manufacturing Science and Engineering, 125. pp. 674-680. ISSN 1087-1357

Amin, A. K. M. Nurul and Dolah, Shuriani and Mahmud, Marlina and Lajis, M. A. (2008) Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2. Journal of Materials Processing Technology, 201. pp. 466-470. ISSN 0924-0136

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2014) Heat-assisted machining. In: Comprehensive Materials Processing. Advanced Machining Technologies, 11 . Elsevier Ltd., Amsterdam, pp. 297-331. ISBN 9780080965338

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2013) Heat assisted machining of metals and alloys using induction heating method. In: International Conference on Engineering Research Innovation & Education (ICERIE 2013), 11 - 13 January 2013, Bangladesh.

Amin, A. K. M. Nurul and Ihsanul Karim , Syed Md. (1990) Feasibility of local manufacturer of spares for fertilizer factories of Bangladesh-a case study. Industrial & Production Engineering Research Bulletin, 5. pp. 1-17.

Amin, A. K. M. Nurul and Imran, M. and Arif, M. (2002) Influence of cutting parameters on chatter and tool wear during end milling of stainless steel conducted on VMC. IIUM Engineering Journal, 3 (2). pp. 1-15. ISSN 1511-788X

Amin, A. K. M. Nurul and Jaafar, Israd Hakim and Patwari, Muhammed Anayet Ullah and Zubaire, W.W.D. (2010) Role of discrete nature of chip formation and natural vibrations of system components in chatter formation during metal cutting. IIUM Engineering Journal, 11 (1). pp. 124-138. ISSN 1511-788X

Amin, A. K. M. Nurul and Khaled, Khalil (1999) Investigation of the influence of different parameters on chatter arising during metal cutting process. BUET Studies, 2 (2). pp. 34-47.

Amin, A. K. M. Nurul and Khalid, Noor Syairah and Mohd Nasir, Siti Nurshahida and Arif, Muammer Din (2012) Investigation of the effects of machining parameters and air blowing on surface topography in high speed end milling of silicon. Advanced Materials Research, 576. pp. 11-14. ISSN 1022-6680

Amin, A. K. M. Nurul and Khalid, Noor Syairah and Mohd Nasir, Siti Nurshahida and Arif, Muammer Din (2012) Statistical approach to modeling & optimization of surface roughness in high speed end milling of silicon with diamond coated tools. Advanced Materials Research, 576. pp. 28-31. ISSN 1022-6680

Amin, A. K. M. Nurul and Khalil , Md. Khaled (1994) Investigation of chatter arising in Machine Tool-Fixture Work (MTFW) system during turning. In: Proceedings of the International Conference on Advanced Manufacturing Technologies (ICAMT '94), 29 - 30 August 1994, Johor Bahru, Malaysia.

Amin, A. K. M. Nurul and Lajis, M. A. and Ismail, Ahmad Faris (2014) A Method and an Apparatus for Machining a Tool Steel. MY-152227-A.

Amin, A. K. M. Nurul and M. M., Rahman and M. M., Hossain (1996) A case study on design and manufacture of tilting pad thrust bearing for steam turbine of fertilizer factories. In: Proceedings Third Annual Paper Meet, 31 Oct - 2 Nov 1996, Chittagong.

Amin, A. K. M. Nurul and Md., Abu Hanifa (1990) Experimental investigation of chip tool contact process and determination of optimum cutting speed for steel of any composition. Industrial & Production Engineering Research Bulletin, 5. pp. 59-72.

Amin, A. K. M. Nurul and Md. Saad, Muhd Hafiz and Arif, Muammer Din (2012) Modeling and optimization of surface roughness and vibration amplitude in heat assisted end milling of SKD 11 tool steel using ball nose tool. Advanced Materials Research, 538-41. pp. 799-803. ISSN 1022-6680

Amin, A. K. M. Nurul and Mohamad, Ummu Atiqah Khairiyah and Arif, Muammer Din (2014) Implementation of magnetic damping to reduce chatter amplitude and tool wear during turning of stainless steel AISI 304. Applied Mechanics and Materials, 607. pp. 171-175. ISSN 1660-9336

Amin, A. K. M. Nurul and N. V., Talantov (1986) Influence of the instability of chip formation and preheating of work on tool life in maching high temperature resistant steel and titanium alloys. Mechanical Engineering Research Bulletin, 9. pp. 52-62.

Amin, A. K. M. Nurul and N. V., Talantov (1987) Investigation of the influence of chatter on tool wear. Mechanical Engineering Research Bulletin, 10. pp. 11-18.

Amin, A. K. M. Nurul and Nassar, Mahmoud M.A. and Arif, Muammer Din (2014) Optimization of surface roughness in micro-high speed end milling of soda lime glass using uncoated tungsten carbide tool with compressed air blowing. Applied Mechanics and Materials, 607. pp. 103-107. ISSN 1660-9336

Amin, A. K. M. Nurul and Sankar, Roy (1987) Experimental determination of optimum cutting conditions in turning low alloyed steel with cemented carbide tool. Bangaldesh J. Sci. Res., 5 (1). pp. 39-53.

Amin, A. K. M. Nurul and Sarder , A. K. (2002) Influence of work and tool materials on parameters of electrical discharge machining(EDM). IIUM Engineering Journal, 3 (1). pp. 17-22. ISSN 1511-788X

Amin, A. K. M. Nurul and Sulaiman, Syidatul Akma and Arif, Muammer Din (2012) Development of mathematical model for chip serration frequency in turning of stainless steel 304 using RSM. Applied Mechanics and Materials, 217-19. pp. 2206-2209. ISSN 1660-9336

Amin, A. K. M. Nurul and Sulaiman, Syidatul Akma and Mohd Zainun, Siti Noor Izzati and Arif, Muammer Din (2012) Surface roughness optimization in end milling of stainless steel AISI 304 with uncoated WC-Co insert under magnetic field. Advanced Materials Research, 576. pp. 119-122. ISSN 1022-6680

Ariff, Tasnim Firdaus and Azmi, Muhammad Firdaus and Iqbal, Mohammad (2014) Cost analysis of using hybrid microwave post-sintered aluminium oxide inserts. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 53-58. ISBN 9789699952074

Asfana, Banu and Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Wayne, N. P. Hung (2015) Material removal rate of zirconia in electro discharge micromachining. Advanced Materials Research, 1115. pp. 20-23. ISSN 1022-6680

Asif Iqbal, A.K.M. and Khan, Ahsan Ali (2010) Modeling and analysis of MRR, EWR and surface roughness in EDM milling through response surface methodology. American Journal of Engineering and Applied Sciences, 3 (4). pp. 611-619. ISSN 1941-7039 (O), 1941-7020 (P)

Azhari , Mohd Azmir and Khan, Ahsan Ali and Abdullah, Rahmah (2009) Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics composite. International Journal of Material Forming, 2 (1). pp. 37-44. ISSN 1960-6214 (O), 1960-6206 (P)

Azim, M. Anwarul and Amin, A. K. M. Nurul and Khan, Ahsan Ali (1989) Design and manufacture of a ten ton capacity wedge jack. Industrial & Production Engineering Research Bulletin, 4 (1). pp. 1-10.

B

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Mohamed Ariff, Tasnim Firdaus (2014) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23th-25th September 2014, Kuala Lumpur. (Unpublished)

Bahar, Rubina and Yahya, Nur Adilah and Mohamed Ariff, Tasnim Firdaus (2014) Design and development of a versatile ice clamping system. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23rd-25th September 2014, Kuala Lumpur. (Unpublished)

E

Echrif, Salah B. M. and Hrairi, Meftah (2012) Finite element investigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 169-173. ISSN 1755-9766

Echrif, Salah B. M. and Hrairi, Meftah (2014) Significant parameters for the surface roughness in incremental forming process. Materials and Manufacturing Processes, 29 (6). pp. 697-703. ISSN 1532-2475 (O), 1042-6914 (P)

Echrif, Salah B. M. and Hrairi, Meftah (2013) An investigation of temperature effect on incremental forming. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Eshteyah, Mohanna and Hrairi, Meftah (2016) Multi-objective optimization of clinching joints quality using Grey-based Taguchi method. The International Journal of Advanced Manufacturing Technology, 87. pp. 233-249. ISSN 0268-3768

Eshteyah, Mohanna and Hrairi, Meftah and Mohiuddin, A. K. M. (2016) Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology, 82 (1-4). pp. 179-195. ISSN 0268-3768

G

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2013) Surface integrity in end milling titanium alloy Ti6Al4V under heat assisted machining. Asian Journal of Scientific Research, 2013 (1). pp. 1-6. ISSN 1992-1454

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Radzi, Mohd Che Daud and Lajis, Mohd Amri (2009) Tool life prediction by response surface methodology in end milling Titanium alloy Ti-6Al-4V using uncoated wc-co inserts. European Journal of Scientific Research, 28 (4). pp. 533-541. ISSN 1450-216X, 1450-202X

Ginta , Turnad L. and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Mohd Radzi, H.C.D. (2009) Improved tool life in end milling ti-6al-4v through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

H

H, Lailatul and Maleque, Md. Abdul (2017) Hardfacing of duplex stainless steel using melting and diffusion processes. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Haque, Md. Mohafizul and Khan, Ahsan Ali (2008) Investigation on structure and properties of brass casting. Journal of Materials Science & Technology, 24 (3). pp. 299-301. ISSN 1005-0302

Haque, Md. Mohafizul and Khan, Ahsan Ali and Ismail, Ahmad Faris (2009) Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy. International Journal of Modern Physics B, 23 (6-7). pp. 826-831. ISSN 0217-9792

Haque, Mohafizul Md and Maleque, Md. Abdul (1998) Effect of process variables on structure and properties of aluminium–silicon piston alloy. Journal of Materials Processing Technology, 77 (1-3). pp. 122-128. ISSN 0924-0136

Haruman, Esa and Yong, Sun and Triwiyanto, A. and Manurung, Yupiter H. P. and Adesta, Erry Yulian Triblas (2012) An investigation on low-temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace. Journal of Materials Engineering and Performance, 21 (3). pp. 388-394. ISSN 1059-9495 (P)

Haruman, Esa and Yong, Sun and Triwiyanto, Askar and Manurung, Yupiter H. P. and Adesta, Erry Yulian Triblas (2011) A feasibility study on low temperature thermochemical treatments of Austenitic Stainless Steel in Fluidized Bed Furnace. High Temp. Mater. Proc, 1-2. pp. 23-29. ISSN 0334-6455 (print); 2191-0324 (online)

He, Yunze and Gao, Bin and Sophian, Ali and Yang, Ruizhen (2017) Transient electromagnetic-thermal nondestructive testing. Elsevier, United Kingdom. ISBN 9780128127872

I

Iqbal, A.K.M. Asif and Khan, Ahsan Ali (2010) Influence of process parameters on electrical discharge machined job surface integrity. American Journal of Engineering and Applied Sciences, 3 (2). pp. 396-402. ISSN 1941-7039 (O), 1941-7020 (P)

Iqbal, Mohammad and Ariff, Tasnim Firdaus and Mat Roseh, Mohd Shahrul Fahmi and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and -, Suryanto (2015) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. Advanced Materials Research, 1115. pp. 59-63. ISSN 1022-6680

J

Jamal, N. A. and Farazila, Y. and Ramesh, S. and Anuar, Hazleen (2014) Role of mechanical alloying parameters on powders distribution of Al/Cu alloy and Al/Cu composite. Materials Research Innovations, 18 (6). SD-190. ISSN 1433-075X

Johari, Norhasnidawani and Hassan, Noor Azlina and Hassan, Norita and Ani, Mohd Hanafi (2016) Effect of nanoparticles on wettability of nanocoating on carbon steel. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 71-74.

K

Karim, A.N. Mustafizul and Ikram, M and Kays, H. M. Emrul and Abdesselam, M. and Ginta, Turnad Lenggo (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 529. pp. 83-89. ISSN 1022-6680

Khan, Ahsan Ali (2008) Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes. The International Journal of Advanced Manufacturing Technology, 39 (5-6). pp. 482-487. ISSN 0268-3768

Khan, Ahsan Ali and Abdulkareem, Suleiman (2008) Modeling of EDM Process parameters for Machining Stainless Steel using Copper Electrodes. The International Journal for Manufacturing Science & Production, 9 (1-2). pp. 87-98. ISSN 0793-6648

Khan, Ahsan Ali and Abdulkareem, Suleuman and Ahmad Abdul Ghani, Nadiatul Amirah and Mohammad Ariffin, Dayanna Sarah (2011) Investigation on the surface finish, MRR and the surface damage during the EDM of tungsten carbide. Advanced Materials Research, 264-65. pp. 1073-1078. ISSN 1022-6680

Khan, Ahsan Ali and Abu Bakar, Marina and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2011) Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 44-48. ISBN 9789674181628

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2011) Influence of machining parameters on surface roughness during EDM of mild steel. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 33-37. ISBN 9789674181628

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2010) Influence of process parameters on surface integrity during EDM of mild steel. In: 22nd United Kingdom-Malaysia Engineering Conference 2010, 8-9th April, 2010, London.

Khan, Ahsan Ali and Ahmed, Mirghani Ishak (2008) Improving tool life using cryogenic cooling. Journal of Materials Processing Technology, 196 (1-3). pp. 149-154.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd. Fauzey, Nur Fadhilah (2016) Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) A new approach of applying cryogenic coolant in turning AISI 304 stainless steel. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2). pp. 171-174. ISSN 1823-0334

Khan, Ahsan Ali and Aman Nor Rasid, Zuraida and Yusof, Izausmawati (2011) A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 196-200. ISBN 9789674181628

Khan, Ahsan Ali and Awang, Mohd Efendee and Annuar, Ahmad Azwari (2005) Surface roughness of Carbides produced by abrasive water jet machining. Journal of Applied Sciences, 5 (10). pp. 1757-1761. ISSN 1812-5654

Khan, Ahsan Ali and Haque, Md. Mohafizul (2007) Performance of different abrasive materials during abrasive water jet machining of glass. Journal of Materials Processing Technology, 191 (1-3). pp. 404-407. ISSN 0924-0136

Khan, Ahsan Ali and Haque, Md. Mohafizul and Ali, Mohammad Yeakub (2008) Effect of size and shape of electrodes on the performance of EDM. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27 - 29 May 2008, Cairo, Egypt.

Khan, Ahsan Ali and Mohammed, Baba Ndaliman (2011) An introduction to electrical discharge machining (EDM). In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 65-69. ISBN 9789674181628

Khan, Ahsan Ali and Mohammed, Baba Ndaliman and Mohammad , Yeakub Ali (2011) Developments in EDM process variables. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 70-75. ISBN 9789674181628

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Ali, Mohammad Yeakub and Mansor, Mas Hafizah and Idrus, Nurul-Ain (2012) Surface modification by EDM using Co-Cr sintered powder metallurgy electrode. Advanced Materials Research, 576. pp. 56-59. ISSN 1022-6680

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Md. Soot, Hamizah and Ishak, Norazah (2012) Influence of thermal conductivity cf electrodes on EDM process parameters. Australian Journal of Basic and Applied Sciences, 6 (9). pp. 337-345. ISSN 1991-8178

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Mohamad, Ummu Atiqah Khairiyah and Sulong, Nurul Farhana and Mohd Zain, Zakaria (2015) Surface quality produced in EDM with tungsten carbide and copper compacted electrodes. Advanced Materials Research, 1115. pp. 24-28. ISSN 1662-8985

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Mohd Zain, Zakaria and Jamaludin, Mohammad F. and Patthi, Umar (2011) Surface Modification using Electric Discharge Machining (EDM) with powder addition. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), 26-28 February 2011, Singapore.

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Mohd Zain, Zakaria and Jamaludin, Mohammad F. and Patthi, Umar (2011) Surface modification using Electric Discharge Machining (EDM) with powder addition. Applied Mechanics and Materials, 110/6. pp. 725-733. ISSN 1660-9336 (O), 978-303785262-0 (P)

Khan, Ahsan Ali and Mohd Ali , Munira and Mohd Shaffiar , Norhashimah (2011) Relationship between machining variables and process characteristics during wire EDM. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 28-32. ISBN 9789674181628

Khan, Ahsan Ali and Mohd Ali , Munira and Shaffiar, Norhashimah (2006) Relationship of surface roughness with current and voltage during wire EDM. Journal of Applied Sciences, 6 (10). pp. 2317-2320. ISSN 1812-5662 (O), 1812-5654 (P)

Khan, Ahsan Ali and Mohd Hambiyah, Mohammad Azhadi and Nazi Nadin, Mohd Faiz (2011) Features of EDM of mild steel with Ta-Cu powder compacted electrodes. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 23-27. ISBN 9789674181628

Khan, Ahsan Ali and Mohd Hambiyah, Mohammad Azhadi and Nazi Nadin, Mohd Faiz (2011) A study on material removal rate during EDM with tantalum carbide-copper compacted electrode. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 18-22. ISBN 9789674181628

Khan, Ahsan Ali and Mohd Noh, Nurul Shima (2011) Role of current, voltage and spark on-time on electrode material migration during EDM. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 12-17. ISBN 9789674181628

Khan, Ahsan Ali and Munajat, Noraziaty and Tajudin, Harnisah (2005) A study on abrasive water jet machining of aluminum with garnet abrasives. Journal of Applied Sciences, 5 (9). pp. 1650-1654. ISSN 1812-5654

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) Features of electrode wear during EDM of mild steel with TaC-Cu powder compacted electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 49-53. ISBN 9789674181628

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) Influence of current, spark on-time and off-time on electrode wear during EDM of mild steel. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 54-58. ISBN 9789674181628

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) A comparative study on work surface hardness EDMed by Ta-C powder compacted and copper electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 59-64. ISBN 9789674181628

Khan, Ahsan Ali and Ndaliman, Mohammed Baba and Mohammad , Yeakub Ali and Al-Falahi, Muath D. and Ibrahim, Haazin A. and Mustapa, Mohad S. (2013) The Effect of EDM with external magnetic field on surface roughness of stainless steel. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Ndaliman, Mohammed Baba and Mohammad , Yeakub Ali and Lawal, Sunday Albert and Sulong, Nurul Farhana and Mohamad, Ummu Atiqah Khairiyah (2013) Effect of electrical parameters on performance of Cu-TiC mixed ceramic compact electrode in EDM process. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Ndaliman , Mohammed Baba and Ali , Mohammad Yeakub and Mansor, Mas Hafizah and Idrus, Nurul-Ain (2012) Surface modification by EDM using CO-CR sintered powder metallurgy electrod. In: IIUM Engineering Congress 2012, 3 - 5 July 2012, Kuala Lumpur, Malaysia. (Unpublished)

Khan, Ahsan Ali and Saad, Affendi and Mohd Isa, Mohd Zulfadli Isma (2011) Tool wear rate during electrical discharge machining (EDM) with eccentric electrode. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 2-6. ISBN 9789674181628

Khan, Ahsan Ali and Saad, Affendi and Mohd Isa, Mohd Zulfadli Isma (2011) Wear ratio and work surface finish during electrical discharge machining (EDM) with eccentric electrode. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 7-11. ISBN 9789674181628

Khan, Ahsan Ali and Salama Hajjaj, Sami (2006) Capabilities of cermets tools for high speed machining of austenitic stainless steel. Journal of Applied Sciences, 6 (4). pp. 779-784. ISSN 1812-5654

Khan, Ahsan Ali and Wahid Azmi, Nurfarah and Odenan, Mohd Azim and Mohd Zain, Zakaria (2015) Effect of powder concentration on EDM performance during machining mild steel. Advanced Materials Research, 1115. pp. 7-11. ISSN 1662-8985

Khan, Ahsan Ali (2011) Role of heat transfer on process characteristics during electrical discharge machining. In: Developments in Heat Transfer. InTech (Open access book), pp. 417-436. ISBN 978-953-307-569-3

Khan, Md. Ashikur Rahman and Maleque, Md. Abdul and Rahman, M.M. Hafizur and Kadirgama, K. and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5 (2). pp. 503-507. ISSN 2010-376X

Khan, Md. Ashikur Rahman and Rahman, M. M. and Kadirgama, Kumaran and Maleque, Md. Abdul and Ishak, M. (2011) Prediction of surface roughness of ti-6al-4v in electrical discharge machining: a regression model. Journal of Mechanical Engineering and Sciences (JMES), 1. pp. 16-24. ISSN 2231-8380

M

M. K., Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2007) Effectiveness of uncoated WC-Co and PCD inserts in end milling of aluminum silicon carbide (AlSiC). Journal of Materials Processing Technology, 192-3. pp. 147-158. ISSN 0924-0136

Mahmud, M. A. and Amin, A. K. M. Nurul and Arif, Muammer Din (2012) Surface roughness model for high speed end milling of soda lime glass using carbide coated tools with compressed air blowing. Advanced Materials Research, 576. pp. 107-110. ISSN 1022-6680

Mahmud, M.A and Nurul Amin, A.K.M and Arif, M. D. (2012) A new experimental approach to determination of critical depth in high speed machining of soda-lime glass. Advanced Materials Research, 576. pp. 23-27. ISSN 1022-6680

Maleque, M. H. A. Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Hasan, Muhammad Hasibul (2015) Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research, 1115. pp. 207-2012. ISSN 1022-6680

Maleque, Md. Abdul (2015) Hardsurface layer of TiC embedded alloy steel by TIG torch technique. In: The 2015 ICBTS International Academic Research Conference in Europe & America, 22nd-24th October 2015, The Movenpick Hotels & Resorts Berlin, Germany.

Maleque, Md. Abdul (2015) Novel activated Ni-P-hBN composite powder for efficient solid lubricant coating application. In: PECIPTA2015, 4-6 December 2015, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul (2017) Particulate composite surface by TIG torch surfacing. In: Advanced Materials Characterization Technique (AMCT 2017), 16th-17th August 2017, Genting Highlands, Pahang. (Unpublished)

Maleque, Md. Abdul and ., M. Radhi and Rahman, Md. Mustafizur (2016) Wear study of Mg-SiCp reinforcement aluminium metal matrix composite. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1758-1764. ISSN 2231-8380 (O), 2286-4659 (P)

Maleque, Md. Abdul and ., W. Saffin and Ahmed, A. S (2016) Formation of Fe-C-Si ternary composite coating on CP-titanium and its tribological interaction with Jatropha oil. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Abdullahi, U. (2013) Materials and processing route for aircraft brake system. International Journal of Mechanical and Materials Engineering (IJMME), 8 (1). pp. 14-20. ISSN 1823-0334

Maleque, Md. Abdul and Abdullahi, U. and Ali , Mohammad Yeakub (2015) Morphology of cnt-al nanocomposite under different ball milling parameters. Advanced Materials Research, 1115. pp. 398-401. ISSN 1022-6680

Maleque, Md. Abdul and Adebisi, A. A. and ., N. Izzati (2016) Fracture surface behaviour of Al-Mg-SiCp composite materials. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Bello, K. A and Md Idriss, Ahmed Nazrin and Mirdha, S. (2013) Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique. Applied Mechanics and Materials, 378. pp. 259-264. ISSN 1660-9336

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Adebisi, Adetayo Abdulmumin and Dube, A. (2016) Abrasive wear analysis of TIG melted ceramic coating using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina (2017) Modified surface of duplex stainless steel using TIG torch melting and diffusion techniques. In: Malaysia Technology Expo (MTE 2017), 16th-18th Feb. 2017, Kuala Lumpur. (Unpublished)

Md. Idriss, A. N and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Md Nasir, Ramdziah and Mridha, Shahjahan and Baker, T. N. (2017) Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology. ISSN 0267-0836 (In Press)

Mohamad, Norsalawani and Bahar, Rubina (2016) Minimum Quantity Lubrication (MQL) and its effect on tool wear during miniature drilling: an experimental study. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 65-70.

Mohamed Ariff, Tasnim Firdaus and Kamarudin, Mohd Syahidan and Haron, Mohd Amiruddin (2013) Dry machining of brass using titanium carbonitride (TiCN) coated tool. Applied Mechanics and Materials, 372. pp. 495-500. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Paimin, Muhamad Fahmie and Hassan, Abdirahman (2013) Dry machining of T6061 aluminium alloy using titanium nitride (TiN)and titanium carbonitride (TiCN) coated tools. Applied Mechanics and Materials, 284/87. pp. 291-295. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Sabiyah, Mohamad Yazid and Adam, Mohd Amirul and Nor, Mohd Anuar (2012) Eco-friendly machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 576. pp. 675-678. ISSN 1022-6680

Mohamed Ariff, Tasnim Firdaus and Shafie, Nurul Syamira and Mahamad Zahir, Zamzahariah (2013) Wear analysis of Silicon Nitride (Si3N4) cutting tool in dry machining of T6061 Aluminium Alloy. Applied Mechanics and Materials, 268-70. pp. 563-567. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Sofian, Nur Najwa and Che Mat, Nor Hayati (2013) Dry machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 652/54. pp. 2129-2133. ISSN 1022-6680

Mohamed Ariff, Tasnim Firdaus and Thauri, Shahdura Hammad and Karim, A.N. Mustafizul (2011) Enhancing mechanical and structural properties of TiC inserts using microwave energy. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME2011), 6th-7th June 2011, Putrajaya, Kuala Lumpur.

Mohammad, Yeakub Ali and Khan, Ahsan Ali and Hamzah, Munirah and Khalid, Nor Azura (2009) Study of material removal rate and electrode wear ratio for micro electrical discharge milling of AISI 420 and Stavax ESR. International Journal of Mechanical and Materials Engineering (IJMME), 4 (3). pp. 300-308. ISSN 1823-0334

Mohammed, Baba Ndaliman and Khan, Ahsan Ali and Mohd. Zain, Zakaria (2011) Performance of PM compacted Cu-TaC electrodes during EDM. In: 2nd International Conference on Mechanical & Manufacturing Engineering 2011, (ICME 2011), 6-7 June 2011, Putrajaya, Malaysia.

Mohammed , Baba Ndaliman and Bala, Katsina Christopher and Khan, Ahsan Ali and Mohammad , Yeakub Ali and Abdullahi, Umma and Abdulmumin , Adebisi Adetayo (2015) The effects of sliding parameters on dry wear characteristics of Ti-6Al-4V alloy. Advanced Materials Research, 1115. pp. 213-216. ISSN 1022-6680

Mohammed , Baba Ndaliman and Khan, Ahsan Ali (2011) Development of Powder Metallurgy (PM) compacted Cu-TaC electrode for EDM. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011 ICMAAE '11, 17-19 May 2011, Kuala Lumpur, Malaysia.

Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2012) Formation of nitrides and carbides on titanium alloy surface through EDM. Advanced Materials Research, 576. pp. 7-10. ISSN 1022-6680

Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2013) Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy. Journal of Engineering Manufacture, 227 (9). pp. 1310-1316. ISSN 2041-2975 (O), 0954-4054 (P)

Mohammed Baba, Ndaliman and Khan, Ahsan Ali and Ali, M. Y. (2011) Surface alloying of Ti-6Al-4V using Cu-TaC composite electrode during electrical discharge machining. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Mohammed Baba, Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali and M A, Mohammad Hambiyah (2013) Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. IOP Conference Series: Materials Science and Engineering, 53. pp. 1-8. ISSN 1757-8981

Mohd Ali, Afifah and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2011) Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel. Advanced Materials Research, 264-65. pp. 1015-1020. ISSN 1022-6680

Mohd Ali , Afifah and Adesta, Erry Yulian Triblas and Agusman, Delvis and Mohamad Badari, Siti Norbahiyah and Al Hazza, Muataz Hazza Faizi (2011) Development of surface roughness prediction model for high speed end milling of hardened tool steel. Asian Journal of Scientific Research, 4 (3). pp. 255-263. ISSN 1992-1454

Mohd Azhari, Mohd Azmir and Khan, Ahsan Ali (2008) Investigation on glass/epoxy composite surfaces machined by abrasive water jet machining. Journal of Materials Processing Technology, 198 (1-3). pp. 122-128. ISSN 0924-0136

Mohd Zain, Zakaria and Mohammed, Baba Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2011) Influence of TaC Powder Additive on electrical discharge machining of stainless Steel. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), 6-7 June 2011, Batu Pahat, Johor.

Mohd Zain, Zakaria and Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2012) Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. Advanced Materials Research, 576. pp. 72-75. ISSN 1022-6680

Mohd Zain, Zakaria and Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2014) Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Journal of Mechanical Engineering Science. pp. 1-7. ISSN 0954-4062

Mohd. Zain, Zakaria and Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2012) Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012), 3-5 July 2012, Kuala Lumpur, Malaysia. (Unpublished)

Moudood, M. A. and Sabur, Abdus and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2015) Effect of gap voltage and pulse-on time on material removal rate for electrical discharge machining of Al2O3. Advanced Materials Research, 1115. pp. 3-6. ISSN 1662-8985

Mridha, Shahjahan and Khan, Ahsan Ali (2008) The effects of process variables on the hardness of nitrided 3% chromium steel. Journal of Materials Processing Technology, 201 (1-3). pp. 325-330. ISSN 0924-0136

Mridha, Shahjahan and Md Idriss, Ahmed Nazrin and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Baker, T. Neville (2015) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11). pp. 1362-1369. ISSN 0267-0836

Muhammad Hasibul , Hasan and Md. Sazib Mollik, Sazib (2015) Mechanical performance of montmorillonite dispersed jute reinforced composite. In: Mechanical Performance of Montmorillonite Dispersed Jute Reinforced Composite, Singapor .

Muhammad Hasibul Hasan, Hasan and Md. Sazib Mollik, Sazib and Muataz Hazza Faizi, Muataz (2015) Prediction of crack growth propagation of a super alloy through ANN modeling. Advanced Materials Research, 1115. pp. 217-220. ISSN 1662-8985

N

Ndaliman, Mohammed Baba and Khan, Ahsan Ali (2011) Development of Powder Metallurgy (PM) compacted Cu-TaC electrodes for EDM. Journal of Mechanics Engineering and Automation, 1 (5). pp. 385-391. ISSN 2159-5275 (P); 2159-5283 (O)

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali and M A, Mohammad Hambiyah (2013) Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia.

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali and Wahid, Zaharah (2012) Determination of influential factors on EDMed surface properties using Plackett-Burman design. World Applied Sciences Journal (WASJ), 21 (spec ). pp. 88-93. ISSN 1818-4952

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali and Wahid, Zaharah (2012) Determination of influential factors on edmed surface properties using plackett-burman design. In: IIUM Engineering Congress 2012, 3-5 July 2012, Kuala Lumpur, Malaysia.

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Yeakub Ali , Mohammad (2013) Influence of electrical discharge machining process parameters on surface micro-hardness of titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (3). pp. 460-464.

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Surface modification of titanium alloy through electrical discharge machining (EDM). International Journal of Mechanical and Materials Engineering, 6 (3). pp. 380-384. ISSN 1823-0334

Nurul Amin, A. K. M and Mokhtar, Suhaily and D. Arif, Muammer (2012) Analysis of Machinability of Inconel 718 in High Speed End Milling with Ceramic Inserts Under Room Temperature Conditions. In: UNSPECIFIED.

O

Othman, Maizatulnisa and Ibrahim, Nor Azowa and Ruzaidi, Che Mohd and Mohd Nazarudin, Zakaria and Halim, Zahurin (2012) Biodegradability analysis of KBF reinforced poly(lactic acid) biocomposites. Advanced Materials Research, 576. pp. 434-437. ISSN 1022-6680

P

Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Effect of energy input on wear behaviour of SiC surface modified layer duplex stainless steel. In: 5th Malaysia-Japan Tribology Symposium (MJTS2017), 28th-30th Aug. 2017, Kuala Lumpur.

Paijan, Lailatul Harina and Maleque, Md. Abdul and -, Suryanto (2016) Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur. (Unpublished)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it's prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)

R

Rahman Azmil, Nur Atiqah and Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Chowdhury, Md. Sazzad Hossien (2015) Investigation of surface roughness and material removal rate for high speed micro end milling on PMMA. Advanced Materials Research, 1115. pp. 12-15. ISSN 1022-6680

Rahman Khan, Md. Ashikur and Rahman, M. M. and Kadirgama, Kumaran and Maleque, Md. Abdul and Ishak, M. (2011) Prediction of surface roughness of Ti-6Al-4V in electrical discharge machining: A regression model. Journal of Mechanical Engineering and Sciences (JMES), 1. pp. 16-24. ISSN 2231-8380

S

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method. Applied Mechanics and Materials, 393. pp. 246-252. ISSN 1660-9336

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Moudood, Abdul (2014) Micro-edm for micro-channel fabrication on nonconductive ZrO2 ceramic. International Journal of Automotive and Mechanical Engineering (IJAME), 10 (1). pp. 1841-1851. ISSN 1985-9385 (P) 2180-1606(O)

Sabur, Abdus and Moudood, M. A. and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2011) Effect of micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic. Applied Mechanics and Materials, 465-66. pp. 1329-1333. ISSN 1660-9336

Sabur, Abdus and Syed Mohammed, Mehdi and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Moudood, M. A. (2015) Investigation of surface roughness in micro-EDM of nonconductive ZrO2 ceramic with powder mixed dielectric fluid. Advanced Materials Research, 1115. pp. 16-19. ISSN 1022-6680

Sakiru, Adeleke and Md. Abdul, Maleque and Shahjahan, Mridha (2015) Thin surface layers of iron-based alloys deposited by TIG hardfacing. Tribology Online, 10 (6). pp. 434-440. ISSN 1881-2198

Shah, Qasim Hussain and Topa, Ameen (2014) Modeling large deformation and failure of expanded polystyrene crushable foam using LS-DYNA. Modelling and Simulation in Engineering, 2014 (292647). pp. 1-7. ISSN 1687-5591

Shaha, Sugrib Kumar and Haque, Md. Mohafizul and Khan, Ahsan Ali (2011) Study on the microstructure and properties of Fe-C-Si and Fe-C-Al Cast irons. Advanced Materials Research, 264-65. pp. 1933-1938. ISSN 1022-6680

Shaha, Sugrib Kumar and Haque, Md. Mohafizul and Khan, Ahsan Ali (2011) Wear characteristics of Fe-C-Si and Fe-C-Al cast irons. Advanced Materials Research, 264-65. pp. 1928-1932. ISSN 1022-6680

Shaha, Sugrib Kumar and Khan, Ahsan Ali and Haque, Md. Mohafizul (2011) Design and development of Acrylic Die for producing wax pattern to gabricate hip bone joint. Journal of Materials Science and Engineering B, 1. pp. 184-189. ISSN 0921-5107

Sopyan, Iis and Nawawi, Natasha Ahmad and Shah, Qasim Hussain and Ramesh, Singh and Tan, Chou Yong and Abd Shukor, Mohd Hamdi (2011) Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders. Materials and Manufacturing Processes, 26. pp. 908-914. ISSN 1532-2475 ; 1042-6914

Sulaiman, Syidatul Akma and Amin, A. K. M. Nurul and Arif, Muammer Din (2012) Application of permanent magnets for chatter control in end milling of titanium alloy Ti-6Al-4V. Advanced Materials Research, 576. pp. 15-18. ISSN 1022-6680

Sulaiman, Syidatul Akma and Amin, A. K. M. Nurul and Arif, Muammer Din (2012) Influence of magnetic field on reduction chatter and of surface roughness in end milling of Titanium Alloy - Ti-6Al-4V. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME’2012), 3 - 5 July 2012, Kuala Lumpur.

Sulaiman, Syidatul Akma and Amin, A. K. M. Nurul and Arif, Muammer Din (2012) Optimization of surface roughness in end milling of titanium alloy TI-6AL-4V under the influence of magnetic field from permanents magnets. Advanced Materials Research, 576. pp. 51-55. ISSN 1022-6680

T

Turnad L., Ginta and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in end milling titanium alloy (Ti-6Al-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785

W

WAY Yusoff, wan and Hadi Puwanto, purwanto and Farizahani, mohd and P.T Pham, Duc (2014) Investigation into the differences Chemical properties of Laser Sintering polymer powders using Fourier Transform Infrared Spectroscopy. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10-11 April 2014, Seoul.

Z

Zain, Zakaria Mohd and Khan, Ahsan Ali and Abdulkareem, Suleiman (2011) Influence of electrode profiles on electrical discharge machining of titanium. Advanced Materials Research, 264-65. pp. 1205-1210. ISSN 1022-6680

This list was generated on Fri Oct 20 00:33:43 2017 +08.