IIUM Repository (IREP)

Items where Subject is "T Technology > TS Manufactures > TS195 Packaging"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Jump to: A | J | K | L | M | S
Number of items at this level: 36.

A

Ahmad, Zuraida and Anuar, Hazleen and Yusof, Yusliza (2011) The study of biodegradable thermoplastics sago starch. Key Engineering Materials, 471. pp. 397-402. ISSN 1013-9826

Ali, Fathilah and Jama Awale, Raina and Fakhruldin, Hanan and Anuar, Hazleen (2016) Plasticizing poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material = Peningkatan fleksibiliti poli(laktik asid) menggunakan minyak kelapa sawit terepoksi untuk aplikasi pembungkus mesra alam. Malaysian Journal of Analytical Sciences, 20 (5). pp. 1153-1158. ISSN 1394-2506

Anuar, Hazleen (2012) Effect of nanoclay on the mechanical properties of kenaf fibre reinforced polylactic acid hybrid biocomposite. Research Report. s.n, Kuala Lumpur. (Unpublished)

Anuar, Hazleen (2011) Novel polylactic acid obtained by chemical and biochemical hydrolysis of kenaf fibre. Project Report. The Academy of Sciences for Developing World (TWAS). (Unpublished)

Anuar, Hazleen (2010) Sugar hydrolysis of kenaf fibre for utilization in lactic acid production. PI 2010005191 .

Anuar, Hazleen and Ahmad, Zuraida (2011) Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite. Malaysian Polymer Journal, 6 (1). pp. 51-57. ISSN 1823-7789

Anuar, Hazleen and Ahmad, Zuraida and F., Fuad (2010) Biodegradable PLA-Kenaf fibre biocomposite for cleaner environment. In: Malaysian Science and Technology Congress (MSTC 2010), 9-11 November 2010, Crystal Crown Hotel, Petaling Jaya, Malaysia. (Unpublished)

Anuar, Hazleen and Ahmad, Zuraida and Jozsef Gabor, Kovacs and A., Adilah (2010) Kenaf fibre reinforced poly(lactic acid) biocomposites. In: 8th Global WPC and Natural Fibre Composites Congress and Exhibition, 22–23 June 2010, Stuttgart, Germany. (Unpublished)

Anuar, Hazleen and Ahmad, Zuraida and Kovacs, J. G. and Tabi, T. (2012) Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite. Journal of Thermoplastic Composite Materials, 25 (2). pp. 153-164. ISSN 0892 - 7057

Anuar, Hazleen and Ahmad, Zuraida and Morlin, B. and Kovacs, J. G. (2011) Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites. Key Engineering Materials, 471. pp. 781-785. ISSN ISSN: 1013-9826

Anuar, Hazleen and Fuad, Faizah and J., Asma' and Kaiser, Mohammad Rejaul and Ahmad, Zuraida (2010) Renewable food packaging from PLA-kenaf fibre biocomposite. In: Islamic Innovation Expo 2010 (i-Inova’ 2010), 26-28 September 2010, Indoor Nilai Stadium. (Unpublished)

Anuar, Hazleen and Fuad, Faizah and Kaiser, Mohammad Rejaul and Ahmad, Zuraida and Abdul Razak, Shamsul Bahri (2011) The effect of nanoclay on the tensile properties of PLA-kenaf fibre hybrid bionanocomposite. In: International Conference on Advanced Manufacturing of Composites (ICMAC), 22-24 March 2011, Belfast, United Kingdom. (Unpublished)

Anuar, Hazleen and Jamal, Nur Ayuni and Abd Razak, Shamsul Bahri (2011) Electron beam irradiated nanocomposite for gas barrier application. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC. (Unpublished)

Anuar, Hazleen and Jamal, Nur Ayuni and Abdul Razak, Shamsul Bahri (2011) Electron beam irradiated nanocomposite for gas barrier application. In: IIUM Research, Invention and Innovation Exhibition IRIIE 2011, 9-10 February 2011, Kuala Lumpur, Malaysia. (Unpublished)

Anuar, Hazleen and Kaiser, Mohammad Rejaul (2011) Effect of Nanoclay on Thermal Properties of Polylacticacid-Clay Nanocomposite. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)

Anuar, Hazleen and Kaiser, Mohammad Rejaul and Fuad, Faizah and Ahmad, Zuraida (2011) Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC. (Unpublished)

Anuar, Hazleen and Kaiser, Mohammad Rejaul and Fuad, Faizah and Ahmad, Zuraida (2011) Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Anuar, Hazleen and Kiaser, M. R. and Razak, S.B.A . (2011) Ductile-brittle transition temperature of polylactic acid-based biocomposite. Journal of Thermoplastic Composite Materials, 26 (2). pp. 216-226. ISSN 0892 - 7057

Anuar, Hazleen and Mel, Maizirwan and Mohamed, Nurhafizah Seeni and Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan (2011) Kenaf: renewable source for biopolymer. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan (2010) New potential of biomaterials from kenaf fibre biomass. In: Islamic Innovation Expo 2010 (i-Inova’ 2010), 26-28 September 2010, Indoor Nilai Stadium. (Unpublished)

J

Jame, Raina and Mirghani, Mohamed Elwathig Saeed and Anuar, Hazleen and Samat, Noorasikin and Ali, Fathilah (2015) Preparation and characterization of plasticized Polylactic acid/starch blend. In: 5th International Conference on Advancement in Science and Technology (iCAST 2015), 10th-12th August 2015, Kuantan, Pahang. (Unpublished)

K

Kaiser, Mohammad Rejaul and Abdul Razak, Shamsul Bahri and Anuar, Hazleen (2014) Improvement in thermomechanical properties of injection molded nano-modified hybrid biocomposite. Journal of Thermoplastic Composite Materials, 27 (7). pp. 992-1009. ISSN 0892 - 7057

Kaiser, Mohammad Rejaul and Anuar, Hazleen (2011) Effect of Nanoclay on Thermal Properties of Polylacticacid-Kenaf Hybrid Bio-composite. In: International Conference on Chemical Engineering (ICChE 2011), 29-30 December 2011, Dhaka, Bangladesh. (Unpublished)

Kaiser, Mohammad Rejaul and Anuar, Hazleen and Abd. Razak, Shamsul (2012) Dynamic mechanical behaviour of Poly Ethylene Glycol Plasticized Polylacticacid. Advanced Materials Research, 576. pp. 224-227. ISSN 1022-6680

Kaiser, Mohammad Rejaul and Anuar, Hazleen and Samat, Noorasikin and Abdul Razak, Shamsul Bahri (2013) Effect of processing routes on the mechanical, thermal and morphological properties of PLA-based hybrid biocomposite. Iranian Polymer Journal (English Edition), 22 (2). pp. 123-131. ISSN 1026-1265

L

Lutpi, Husniyah Aliyah and Anuar, Hazleen and Surip, Siti Norasmah and Bonnia, Noor Najmi (2012) Evaluation of elastic modulus and hardness of polylactic acid-based biocomposite by nano-indentation. Advanced Materials Research, 576. pp. 446-449. ISSN 1022-6680

M

M. N. Nur, Aimi and Anuar, Hazleen and S. M., Nurhafizah and S., Zakaria (2015) Effects of dilute acid pretreatment on chemical and physical properties of kenaf biomass. Journal of Natural Fibers, 12 (3). pp. 256-264. ISSN 1544-046X (O), 1544-0478 (P)

Manshor , M.R. and Anuar, Hazleen and Mohd Nasir, Nur Aimi and M.I, Ahmad Fitrie and Wan Busu, Wan Nazri and Sapuan, S. M. and El-Shekeil, Y.A and Wahit, M.U (2014) Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites. Materials and Design, 59. pp. 279-286. ISSN 0261-3069

Mohd Nasir, Nur Aimi and Anuar, Hazleen (2016) Effect of plasticizer on fracture toughness of polylactic acid reinforced with kenaf fibre and montmorillonite hybrid biocomposites. In: Nanoclay reinforced polymer composites: natural fibre/nanoclay hybrid composites. Engineering materials . Springer, Singapore, pp. 263-280. ISBN 978-981-10-0949-5 Online ISBN

Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Kenaf as natural resource for lactic acid production. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)

Mustafa Kamalbhrin, Mohd. Adlan and N. , Nuraisyah and Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd. Nasir, Nur Aimi (2011) Kenaf biomass as potential biopolymer. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)

S

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2013) Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research, 701. pp. 225-228. ISSN 1022-6680

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) A new approach to use Arenga pinnata as sustainable biopolymer: effects of plasticizers on physical properties. Procedia Chemistry, 4. pp. 254-259. ISSN 1876-6196

Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Aimi , N. Nur and Mel, Maizirwan and Mohd Salit, Sapuan (2014) Polylactic acid-based kenaf biomass synthesized via ring opening polymerization. In: Biomass and Bioenergy Applications. Springer International Publishing, Cham; Heidelberg; New York; Dordrecht; London, pp. 211-231. ISBN 978-3-319-07577-8; 978-3-319-07578-5 (ebook)

Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Mohd. Sibi, Nurhanis (2011) Optimizing the pre-treatment of kenaf bast. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)

Surip, Siti Norasmah and Ismail, A. H. and Anuar, Hazleen (2010) A comparative study on the mechanical properties of clay-modified epoxy adhesive by using different clay types. In: 14th European Conference On Composite Materials (ECCM14), 7-10 June 2010, Budapest, Hungary.

This list was generated on Mon Jul 24 21:19:30 2017 +08.