Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ163.26 Energy conservation"

Article

ANR, Reddy and Saleh, A. A. and Islam, Md. Saiful and Hamdan, S. and Maleque, Md. Abdul (2016) Biodiesel production from crude jatropha oil using a highly active heterogeneous nanocatalyst by optimizing transesterification reaction parameters. Energy & Fuels, 30 (1). pp. 334-343. ISSN 0887-0624 E-ISSN 1520-5029

Aabid, Abdul and Abdul Raheman, MD and Ibrahim, Yasser and Anjum, Asraar and Hrairi, Meftah and Parveez, Bisma and Parveen, Nagma and Zayan, Jalal Mohammed (2021) A systematic review of piezoelectric materials and energy harvesters for industrial applications. Sensors, 21 (12). pp. 1-27. ISSN 1424-8220

Aabid, Abdul and Parveez, Bisma and Abdul Raheman, MD and Ibrahim, Yasser and Anjum, Asraar and Hrairi, Meftah and Parveen, Nagma and Zayan, Jalal Mohammed (2021) A review of piezoelectric material-based structural control and health monitoring techniques for engineering structures: challenges and opportunities. Actuators, 10 (5). pp. 1-26. ISSN 2076-0825

Abbas, Muhammad Mujtaba and Kalam, Md Abul and Masjuki, Haji Hassan and Razzaq, Luqman and Khan, Haris Mehmood and Soudagar, Manzoore Elahi M. and Gul, M. and Ahmed, Waqar Ahmed and V., Dhana Raju and Kumar, Ravinder and Ong, Hwai Chyuan (2021) Development of empirical correlations for density and viscosity estimation of ternary biodiesel blends. Renewable Energy, 179. pp. 1447-1457. ISSN 0960-1481

Abdehalim Ahmed Eid, Mohamed Moustafa and Mohd Nashrul, Mohd Zubir and Muhammad, Mohd Ridha and Md. Salim Newaz, Kazi and Mt Aznam, Suazlan and Md Mehedy, Hasan Rony and Ibrahim, F. A. and Alam, Md Shadab and Sadri, Rad (2023) Experimental and numerical investigations on the effect of a novel internal surface micro grooving towards improving convective heat transfer performance of tube heat exchangers. Physics of Fluids, 35 (7). pp. 1-21. ISSN 1070-6631 E-ISSN 1089-7666

Abdullah, Nur Azam (2021) Energy-harvesting via wind interaction: a sustainable flight is a dream for the development of modern aircraft. @green, 1 (8). pp. 20-21. ISSN 2756-7818

Abdullah, Nur Azam and Mohamad, Ahmad Azmin (2022) Recycling EV batteries for environmental ecosystem wellbeing. New Straits Times, 03 April 2022.

Abdullah, Nur Azam and Mohamed Afandi, Mohamed Azizul (2021) Selami sains aerodinamik dalam sukan berbasikal. Berita Harian, 16 February 2021. p. 11.

Afzal, Asif and Samee, Mohammad and Khan, Sher Afghan (2017) Comparative heat transfer analysis in different mini-channel heat sinks. International Journal of Recent Research Aspects, 4 (4). pp. 41-45. ISSN 2349-7688

Ahamed, R. and Kaderi, Mohd Arifin and Rashid, Muhammad Mahbubur and Ferdaus, Mohammad Meftahul (2014) Development and performance testing of a light weight portable solar rice cooker in rural areas of Bangladesh. International Journal of Renewable Energy Resources, 4 (2). pp. 46-48. ISSN 2289-1846

Ahmad, Farah and Kalam, M.A. and Zhang, Zhanying and Masjuki, Haji Hassan (2022) Sustainable production of furan-based oxygenated fuel additives from pentose-rich biomass residues. Energy Conversion and Management: X, 14 (100222). ISSN 2590-1745 (In Press)

Ahmed, Mirghani Ishag and Ahmed, Hamdi E. and Yusoff, M.Z. and Hawlader, M.N.A. (2014) Numerical analysis of heat transfer and nanofluid flow in a triangular duct with vortex generator: two-phase model. Heat Transfer—Asian Research, 45 (3). pp. 1-21. ISSN 1099-2871

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2016) A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles. International Journal of Applied Engineering Research, 11 (4). pp. 2364-2372. ISSN 0973-4562

Ali, Maisarah and Jusoff, Kamaruzzaman and Romadhan, Rahmat and Abakr, Yousifabdalla (2012) Optimization of a cooling system in data centers. Wulfenia Journal, 19 (9). pp. 196-214. ISSN 1561-882X

Amin, Zakaria Mohd. and Hawlader, Mohammad Nurul Alam (2015) Analysis of solar desalination system using heat pump. Renewable Energy, 74. pp. 116-123. ISSN 0960-1481

Aung, Thiri Shwesin and Fischer, Thomas B. and Azmi, Azlin Suhaida (2021) Social impacts of large‑scale hydropower project in Myanmar: a social life cycle assessment of Shweli hydropower dam 1. The International Journal of Life Cycle Assessment, 26 (2). pp. 417-433. ISSN 0948-3349 E-ISSN 1614-7502

Azam, Huda and Mohamad Hanif, Noor Hazrin Hany and Md Ralib, Aliza Aini (2019) Magnetically plucked piezoelectric energy harvester via hybrid kinetic motion. IIUM Engineering Journal, 20 (1). pp. 245-257. ISSN 1511-788X

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Ariff, Tasnim Firdaus (2015) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. Advanced Materials Research, 1115. pp. 468-471. ISSN 1022-6680

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Liang, Song Woei (2004) Performance evaluation of a mechanical vapor compression desalination system. Desalination, 166 (1-3). pp. 123-127. ISSN 0011-9164

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Mohamed Ariff, Tasnim Firdaus (2015) Channeled coolant plate: a new method to enhance freshwater production from an air gap membrane distillation (AGMD) desalination unit. Desalination, 359. pp. 71-81. ISSN 0011-9164

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Ng, K. C. and Yee, Jiun Haw (2014) Experimental study on a multi-stage air gap membrane distillation (AGMD) unit. Jurnal Teknologi, 69 (9). pp. 89-92. ISSN 2180–3722 (O), 0127–9696 (P)

Bakri, Jufriadi and Sutjipto, Agus Geter Edy and Othman, Raihan and Muhida, Riza (2009) Discharge, microstructural and mechanical properties of ZrO2 addition on MgO for plasma display panel materials. Materials Research Innovations, 13 (3). pp. 149-152. ISSN 1433-075X

Bakri, Jufriadi and Sutjipto, Agus Geter Edy and Othman, Raihan and Muhida, Riza (2011) Microstructure and electrical properties of AZO films prepared by RF magnetron sputtering. Advanced Materials Research, 264-65. pp. 754-759. ISSN 1662-8985

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2015) Waste heat recovery in heat pump systems: solution to reduce global warming. IIUM Engineering Journal, 16 (2). pp. 31-42. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

Chaudhari, Pavan Bhaskar and Arakerimath, Rachayya and Pathan, Khizar Ahmed and Khan, Sher Afghan (2024) Comparative experimental analysis and performance optimization of single-cylinder DI and HCCI engine with series catalytic converters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 121 (1). pp. 173-187. ISSN 2289-7879

Chua, K T and Hawlader, Mohammad Nurul Alam and Malek, A (2003) Pretreatment of seawater: Results of pilot trials in Singapore. Desalination, 159 (3). pp. 225-243. ISSN 0011-9164

Cuong, Nguyen Tien and Mohamed, Mohd Ambri and Otsuka, Nobuo and Chi, Dam Hieu (2012) Reconstruction and electronic properties of interface between carbon nanotubes and ferromagnetic co electrodes. Applied Mechanics and Materials, 229-31. pp. 183-187. ISSN 1660-9336

Delvi, Hamza Afser and Faheem, Mohammed and Khan, Sher Afghan and Kumar M., Kiran and Kareem Ullah, Mohammad (2019) Effect of ethanol-gasoline blends on performance, combustion and emission characteristics of spark ignition engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 209-220. ISSN 2289-7879

Dhairiyasamy, Ratchagaraja and Rajendran, Silambarasan and Khan, Sher Afghan and Alahmadi, Ahmad Aziz and Alwetaishi, Mamdooh and A˘gbulut, Ümit (2024) Enhancing thermal efficiency in flat plate solar collectors through internal barrier optimization. Thermal Science and Engineering Progress, 54. pp. 1-15. ISSN N/A E-ISSN 2451-9049

Elumalai, R. and Sumathy, S. and K, Ravi and Akhtar, Mohammad Nishat and Elumalai, P.V. and Khan, Sher Afghan and Gupta, M. Satayanarayana and Asif, Mohammad (2024) Experimental investigation and gray relational optimization of engine parameters to improve the output characteristics of an ammonia biodiesel-powered dual-fuel combustion engine. Case Studies in Thermal Engineering, 56. pp. 1-20. ISSN 2214-157X

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah (2016) Validated analytical modeling of diesel engine regulated exhaust CO emission rate. Advances in Mechanical Engineering, 8 (6). pp. 1-15. ISSN 1687-8140

Fayaz, Hussain and Khan, Sher Afghan and Saleel, Ahamad C. and Shaik, Saboor and Yusuf, Abdulfatah Abdu and Veza, Ibham and Fattah, I. M. Rizwanul and Rawi, Nurul Fazita Mohammad and Asyraf, M. R. M. and Alarif, Ibrahim M. (2022) Developments in nanoparticles enhanced biofuels and solar energy in Malaysian perspective: a review of state of the art. Journal of Nanomaterials, 2022. pp. 1-22. ISSN 16874129 E-ISSN 16874110

Fazal, M. A. and Sundus, F. and Masjuki, Haji Hassan and Rubaiee, Saeed and Quazi, M.M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. pp. 1-8. ISSN 2213-1388

G M, Fharukh Ahmed and Baig, Maugal Ahmed Ali and Bashir, Musavir and Khan, Sher Afghan (2016) Control of ideally expanded and under expanded nozzle flows with micro jets. IOSR journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6). pp. 83-89. ISSN 2320-334x E-ISSN 2278-1684

Hawlader, Mohammad Nurul Alam and Ng, K C and Chandratilleke, T T and SHARMA, D and Koay, K H L (1987) Economic evaluation of a solar water heating system. Energy Conversion and Managemen, 27 (2). pp. 197-204. ISSN 0196-8904

Hawlader, Mohammad Nurul Alam and Ye, Shaochun (2008) PERFORMANCE OF A SOLAR INTEGRATED HEAT PUMP AIR-CONDITIONER, WATER HEATER AND DRYER. International Journal of Ambient Energy, 29 (4). pp. 189-196. ISSN 0143-0750

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar (2015) The study on performance of naturally aspirated spark ignition engine equipped with waste heat recovery mechanism. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10058-10065. ISSN 1819-6608

Hrairi, Meftah and Abdullah, Abdullah F. and Ahmed, Mirghani Ishak (2013) Cooling of motorcyclist helmet with thermoelectric module. Middle-East Journal of Scientific Research, 13. pp. 103-108. ISSN 1990-9233

Jain, Yogesh Kumar and Kurkute, Vijay and Deshmukh, Sagar Mane and Pathan, Khizar Ahmed and Attar, Ajaj Rashid and Khan, Sher Afghan (2024) The influence of plate fin heat sink orientation under natural convection on thermal performance: an experimental and numerical study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 118-129. ISSN 2289-7879

Jamshaid, Muhammad and Masjuki, Haji Hassan and Kalam, Md Abul and Zulkifli, Nurin Wahidah Mohd and Arslan, Ahmed and Qureshi, Akbar Ali (2021) Experimental investigation of performance, emissions and tribological characteristics of B20 blend from cottonseed and palm oil biodiesels. Energy, 239. pp. 1-15. ISSN 0360-5442 E-ISSN 1873-6785

Jankaew, Nilnet and Mohideen Batcha, Mohd Faizal and Palamanit, Arkom and Mel, Maizirwan and Wae-Hayee, Makatar (2022) The effects of pressure and temperature on flame characteristics of crude palm oil combustion. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 98 (2). pp. 165-174. ISSN 2289-7879

Jilte, Ravindra and Afzal, Asif and Ağbulut, Ümit and Shaik, Saboor and Khan, Sher Afghan and Linul, Emanoil and Asif, Mohammad (2023) Battery thermal management of a novel helical channeled cylindrical Li-ion battery with nanofluid and hybrid nanoparticle-enhanced phase change material. International Journal of Heat and Mass Transfer, 216 (124547). pp. 1-18. ISSN 0017-9310

Kamaruzzaman, Kartini and Kamaruzzaman, Kazzman (2023) Manfaatkan teknologi media henti kezaliman Zionis. Berita Harian, Komentar (11 April 2023). p. 11.

Karthick, C. and Chatterjee, Dipankar and Gupta, Nidhish and Saxena, Prakhar and Sivagami, K. and Jeevanantham, A. K. and Kasianantham, Nanthagopal and Shaik, Saboor and Asif, Mohammad and Khan, Sher Afghan and Ağbulut, Ümit (2023) Environmental, combustion, and performance investigation of low viscous biofuel in port fuel injection spark‑ignition engine. Journal of Thermal Analysis and Calorimetry. pp. 1-22. ISSN 1588-2926 E-ISSN 1388-6150

Khan, Shaheer Ahmed and Rahman, Mohammed Ataur and Ibrahim, Fatima Babiker Dafa-Alla (2021) The impact of film thickness on the properties of ZnO/PVA nanocomposite film. Materials Research Express, 8 (7). pp. 1-12. E-ISSN 2053-1591

Khan, Sher Afghan and Alrobaian, Abdul Rahman and Asad Ullah, Mohammed and Rao, Ashwin (2019) Threaded spikes for bluff body base flow control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 194-203. E-ISSN 2289-7879

Krishnamoorthy, Ramalingam and Vellaiyan, Suresh and Venkatesan, Elumalai Perumal and Khan, Sher Afghan and Zakariya, Mahmoud and Saleel, Chanduveetil Ahamed (2023) Challenges and opportunities of Low Viscous Biofuel- a prospective review. ACS omega. pp. 1-16. ISSN 2470-1343

Kumar, Rahul and Kumar, Veera Sesha and Butt, M. Mursaleen and Sheikh, Nazir Ahmed and Khan, Sher Afghan and Afzal, Asif (2020) Thermo-mechanical analysis and estimation of turbine blade tip clearance of a small gas turbine engine under transient operating conditions. Applied Thermal Engineering, 179. pp. 1-32. ISSN 1359-4311

L., Harish Kumar and Kazi, Salim Newaz and Masjuki, Haji Hassan and Mohd Zubir, Mohd Nashrul and Jahan, Afrin and Oon, Cheen Sean (2021) Experimental study on the effect of bio‑functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector. Journal of Thermal Analysis and Calorimetry. pp. 1-18. ISSN 1388-6150 E-ISSN 1588-2926

Lee, Pei May and Yang, Chuan Choong and Kwong, Wei Choong (2023) An exploratory study on students’ electricity consumption in RCE Gombak for sustainable communities. Malaysian Journal of Social Sciences and Humanities, 8 (3). pp. 1-12. E-ISSN 2504-8562

Mahbub, Fazle and Hawlader, Mohammad Nurul Alam and Mujumdar, A. S. (2009) Combined water and power plant (CWPP) — a novel desalination technology. Desalination and Water Treatment, 5. pp. 172-177. ISSN 1944-3994 (O), 1944-3986 (P)

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2014) Tribocorrosion behaviour of biodiesel. Tribology Online, 9 (1). pp. 10-20. ISSN 1881-2198

Maleque, Md. Abdul and Masjuki, H. H. and Sapuan, Salit Mohd (2003) Vegetable-based biodegradable lubricating oil additives. Industrial Lubrication and Tribology, 55 (3). pp. 137-143. ISSN 0036-8792

Maleque, Md. Abdul and Masjuki, H.H. (2002) Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant. Industrial Lubrication and Tribology, 54 (4). pp. 177-182. ISSN 0036-8792

Maleque, Md. Abdul and Md Idriss, Ahmed Nazrin and Naping, Rosmia and Rahman, Md Mustafizur and Efeoglu, Ihsan (2024) The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG Arc process. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 33-42. ISSN 2289 – 7895

Masjuki, H.H. and Kalam, Md Abul and Maleque, Md. Abdul and Kubo, Aizoh and Nonaka, Tetsuya (2001) Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. Journal of Automobile Engineering, 215 (3). pp. 393-404. ISSN 0954-4070

Masjuki, H.H. and Maleque, Md. Abdul (1996) Wear, performance and emissions of a two-stroke engine running on palm oil methyl ester blended lubricant. Journal of Engineering Tribology, 210 (4). pp. 213-219. ISSN 1350-6501

Mazaheri, Hoora and Ong, Hwai Chyuan and Amini, Zeynab and Masjuki, H. H. and Mofijur, M. and Su, Chia Hung and Badruddin, Irfan Anjum and Yunus Khan, T.M. (2021) An overview of biodiesel production via calcium oxide based catalysts: current state and perspective. Energies, 14 (13). pp. 1-23. ISSN 1996-1073

Md Idriss, Ahmed Nazrin and Kasolang, Salmiah and Md. Abdul, Maleque and Md Nasir, Ramdziah (2021) An overview on the importance of surface modification by TIG and lasers incorporating carbides and their relations to wear behaviours. Jurnal Tribologi, 29. pp. 96-116. ISSN 2289-7232

Memon, Mujtaba S and Haeng, Muk Cho and Masjuki, Haji Hassan and M.A, Kalam and Miiro, Farooq and M. Soudagar, Manzoore Elahi and Muhammad, Gul and Ahmed, Waqar and Afzal, Asif and Bashir, Shahid and V., Dhana Raju and Yaqoob, Haseeb and A.Z, Syahir (2021) Effect of alcoholic and nano-particles additives on tribological properties of diesel–palm–sesame–biodiesel blends. Energy Reports, 7. pp. 1162-1171. ISSN 2352-4847

Mohamad, Ahmad Azmin and Abdullah, Nur Azam (2022) Recycling electric vehicle batteries. @green|, 2 (11). p. 20. ISSN 2756-7818

Mohiuddin, A. K. M. and Amer, Muhammad Yazid and Rahman, Mohammed Ataur and Khan, Ahsan Ali (2017) Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X

Mt Aznam, Suazlan and Che Ghani, Nor Artisham and Chowdhury, Md. Sazzad Hossien (2019) A numerical solution for nonlinear heat transfer of fin problems using the Haar wavelet quasilinearization method. Results in Physics, 14. pp. 1-8. ISSN 2211-3797

Mt Aznam, Suazlan and Maruoka, Naru and Imai, Ryosuke and Mori, Shoji (2021) Process of liquid supply to heated surface by a honeycomb porous plate for critical heat flux enhancement. Journal of Thermal Science and Technology, 16 (3). pp. 1-17. ISSN 1880-5566 E-ISSN 1880-5566

Muhammad, Gul and Mohd Zulkifli, Nurin Wahidah and Md. Abul, Kalam and H.H., Masjuki and Abbas, Muhammad Mujtaba and Yousuf, Sumra and Bashir, M. Nasir and Ahmed, Waqar and M.N.A.M., Yusoff and Noor, Shazia and Ahmad, Rauf and Hassan, M. Tahir (2021) RSM and artificial neural networking based production optimization of sustainable cotton bio-lubricant and evaluation of its lubricity & tribological properties. Energy Reports, 7. pp. 830-839. ISSN 2352-4847

Odiwo, H. and Bello, K. A and Abdulwahab, M and Adebisi, A. A. and Maleque, Md. Abdul (2021) Properties of aluminium/electroless ni-coated sic composites - a review. FUDMA Journal of Sciences, 5 (1). pp. 381-394. ISSN 2645-2944 E-ISSN 2616-1370

Onsa, M.H. and Sapuan, Salit Mohd and Basri, S. B. and Megat Ahmad, Megat Mohamad Hamdan and Maleque, Md. Abdul (2001) Elastohydrodynamic lubrication study of hard rolling contact using boundary element method. Industrial Lubrication and Tribology, 53 (4). pp. 148-154. ISSN 0036-8792

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ariff, Tasnim Firdaus (2016) Effect of air gap in the performance of AGMD system. ARPN Journal of Engineering and Applied Sciences, 11 (6). 4087 -4093. ISSN 1819-6608

Quadros, Jaimon Dennis and Mogul, Yakub Iqbal and Ağbulut, Ümit and Gürel, Ali Etem and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Jilte, Ravindra D. and Asif, Mohammad (2024) Analysis of bubble departure and lift-off boiling model using computational intelligence techniques and hybrid algorithms. International Journal of Thermal Sciences, 197. pp. 1-12. ISSN 1290-0729 E-ISSN 1778-4166

Rahman, Mohammed Ataur and Ihsan, Sany Izan (2024) Electricity generation of electric coaster in trapping solar heat. International Journal on Integration of Knowledge, 1 (2). pp. 1-14. E-ISSN 2990-9392

Ramachandran, Elumalai and Krishnaiah, Ravi and Perumal Venkatesan, Elumalai and Medapati, Sreenivasa Reddy and Sabarish, Rajagopalan and Khan, Sher Afghan and Asif, Mohammad and Linul, Emanoil (2023) Experimental studies to reduce usage of fossil fuels and improve green fuels by adopting hydrogen−ammonia−biodiesel as trinary fuel for RCCI engine. ACS omega, 9 (1). A-J. E-ISSN 2470-1343

Razali, Nur Syazana Izzati and Yusoff, Siti Hajar and Tumeran, Nor Liza and Mohd Yunus, Muhammad Sharir Fathullah (2023) Indoor light energy harvesting technique to energize a heat sensor using polycrystalline solar panel. Bulletin of Electrical Engineering and Informatics. 3238 -3246. ISSN 2302-9285

Revichandran, Rajeanderan and Mohamed Ali, Jaffar Syed and Moumen Mohammed Mahmoud, Idres and Mohiuddin, A. K. M. (2021) A review of HVAC system optimization and its effects on saving total energy utilization of a building. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. ISSN 2289-7879 (In Press)

Revichandran, Rajeanderan and Syed Mohamed Ali, Jaffar and Idres, Moumen and Mohiuddin, A.K.M (2021) Energy efficiency and optimization of buildings for sustainable development in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. ISSN 2289-7879 (In Press)

Roy, Roji George and Agbulut, Ümit and Koshy, Chacko Preno and Alex, Y. and Sailesh, K.S. and Khan, Sher Afghan and Jilte, Ravindra and Linul, Emanoil and Asif, Mohammad (2024) Impact of synthesizing surfactant-modified catalytic ceria nanoparticles on the performance and environmental behaviors of coconut oil/diesel-fueled CI engine: an optimization attempt. Energy, 295. pp. 1-21. ISSN 0360-5442 E-ISSN 1873-6785

S, Parashurama and Saleel, C. Ahmed and M. S., Govindegowda and Khan, Sher Afghan (2019) Hydrocarbons as alternative refrigerants in domestic refrigerators. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3). pp. 496-501. ISSN 2278-3075

S.Y., Cetin and Md. Abdul, Maleque and Hassan, Masjuki and A., Hamdan (2022) Wear simulation of automotive engine component materials under biodiesel. Journal of Mechanical Engineering and Sciences (JMES), 16 (4). 9167 - 9174. ISSN 2289-4659 E-ISSN 2231-8380

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) A new approach to use Arenga pinnata as sustainable biopolymer: effects of plasticizers on physical properties. Procedia Chemistry, 4. pp. 254-259. ISSN 1876-6196

Sahari, Japar and Sapuan, Mohd Salit and Zainudin, Edi Syams and Maleque, Md. Abdul (2014) Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences, 11 (1). pp. 1836-1840. ISSN 1546-9239 E-ISSN 1554-3641

Sahid, N.S.M. and Rahman, Md. Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2017) Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. International Journal of Automotive and Mechanical Engineering, 14 (1). pp. 3913-3926. ISSN 2229-8649 E-ISSN 2180-1606

Sapuan, S. M. and Maleque, Md. Abdul (2005) Design and fabrication of natural woven fabric reinforced epoxy composite for household telephone stand. Materials and Design, 26 (1). pp. 65-71. ISSN 0261-3069

Sathish, T and Pelluru, Suresh and Sharma, Kamal and Saravanan, R. and Saleel, C Ahamed and Shaikh, Saboor and Khan, Sher Afghan and Panchal, Hitesh (2023) Zero emission /energy building heating through parabolic dish collector focused KNO3–NaNO3 and KNO3–NaNO3–NaNO2 PCM absorber: a case study. Case Studies in Thermal Engineering, 44 (102854). pp. 1-10. ISSN 2214-157X

Seder, Islam M.F. and Ahmed, Mirghani Ishag and Ahmed, Shugata and Hawlader, M.N.A. (2014) Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 211-217. ISSN 1991-8178

Sheikh, Fahim Rahim and Deshmukh, Suresh Pandurang and Ardhapurkar, Purushottam and Pathan, Khizar Ahmed and Shaikh, Sohel Khalil and Khan, Sher Afghan (2024) Modeling and experimental validation of NePCM-Nanofluid-Based PVT system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 122 (1). pp. 205-222. ISSN 2289-7879

Siddiqi, Mohammad Umar and Gulhane, P. Nitin and Khan, Sher Afghan and Taler, Jan and Cebula, Arthur and Oclon, Pawel and Patil, Rajesh (2019) Numerical investigation of semiempirical relations representing the local Nusselt number magnitude of a pin fin heat sink. Heat Transfer—Asian Research, 48 (5). pp. 1857-1888. ISSN 1099-2871 E-ISSN 1523-1496

Siddique, Mohd Umair and Gulhane, N P and Al-Robaian, Abdul Rehman A and Khan, Sher Afghan (2019) On numerical investigation of semi-empirical relations representing local nusselt number at lower nozzle-target spacing’s. International Journal of Engineering, 32 (1). pp. 137-145. ISSN 1025-2495 E-ISSN 1735-9244

Srikrishnan, Guruprasad and Shenbagamuthuraman, V. and Ağbulut, Ümit and Mishra, Ishani and Jain, Jesika and Balusamy, Saravanan and Chinnadurai, Karthick and Chatterjee, Dipankar and Shankar, E. and Shaik, Saboor and Hoang, Anh Tuan and Saleel, C Ahamed and Khan, Sher Afghan and Kasianantham, Nanthagopal (2024) Alcohol fuels in SI engines: a comprehensive state‑of‑the‑art review on combustion, performance, and environmental impacts. Journal of Thermal Analysis and Calorimetry, 154. pp. 1-63. ISSN 1388-6150 E-ISSN 1588-2926

Tariq, Fareeha and Abdullah, Lili Marziana and Sulaiman, Suriani and Tariq, Waqar (2019) Energy saving monitoring using fuzzy logic for computing lab. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.6 Special Issue). pp. 190-194. E-ISSN 2278-3091

Tarique, Altaf Hasan and Khan, Sher Afghan and Khalid, Farrukh and Azami, Muhammad Hanafi (2024) Development and assessment of a thermochemical cycle and SOFC-based hydrogen energy systems as a potential energy solution for the peak demand in a sustainable community. International Journal of Hydrogen Energy, 51 (Part D). pp. 1382-1389. ISSN 0360-3199

Teo, H. G. and Lee, P. S. and Hawlader, Mohammad Nurul Alam (2012) An active cooling system for photovoltaic module. Applied Energy, 90 (1). pp. 309-315. ISSN 0306-2619

Tripathi, Abhishek Kumar and Mangalpady, Aruna and Elumalai, P.V. and Karthik, Krishnasamy and Khan, Sher Afghan and Asif, Mohammad and Rao, Koppula Srinivas (2024) Advancing solar PV panel power prediction: A comparative machine learning approach in fluctuating environmental conditions. Case Studies in Thermal Engineering, 59. pp. 1-15. ISSN 2214-157X

Uddin, M.N. and Rashid, Muhammad Mahbubur and Taweekun, J. and Techato, K. and Roy, R. and Rahman, M.A. (2018) Investigation on producing silica from rice husk biomass. International Journal of Renewable Energy Resources, 8 (1). pp. 12-23. ISSN 2289-1846

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Safiei, Wahaizad and Kadirgama, Kumaran and Maleque, Md. Abdul (2022) Effects of minimum quantity lubrication technique in different machining processes-a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 135-159. ISSN 2289-7879

Venkatesan, Elumalai Perumal and Krishnaiah, Ravi and Prasad, Kalapala and Medapati, Sreenivasa Reddy and Sree, Sripada Rama and Asif, Mohammad and Khan, Sher Afghan and Linul, Emanoil (2024) Compatibility effects of waste cooking oil biodiesel blend on fuel system elastomers in compression ignition engines. ACS Omega, 9 (6). pp. 6709-6718. ISSN 2470-1343

Venkatesan, Elumalai Perumal and Rajendran, Silambarasan and Murugan, Manickam and Medapati, Sreenivasa Reddy and Murthy, Keerty Venkata Sri Ramachandra and Alwetaishi, Mamdooh and Khan, Sher Afghan and Saleel, Chanduveetil Ahamed (2023) Performance and emission analysis of biodiesel blends in a low heat rejection engine with an antioxidant additive: an experimental study. ACS omega, 8 (40). pp. 36686-36699. E-ISSN 2470-1343

Wan Bukhari, Wan Muhd Syarifuddin and Toha, Siti Fauziah and Abu Hanifah, Rabiatuladawiah and Kamisan, Nor Azam (2022) Speed analysis of motorcycle's wheel drive in various road conditions. International Journal of Power Electronics and Drive Systems (IJPEDS), 13 (1). pp. 30-38. ISSN 2088-8694

Warimani, Mahammadsalman and Bellary, Sayed Ahmed Imran and Azami, Muhammad Hanafi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Veerasigamani, Manieniyan (2024) Effect of multi-cycle combustion on nox emission formation of hydrogen fuel in pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 120 (1). pp. 217-233. ISSN 2289-7879

Warimani, Mahammadsalman and Chaudhary, Zakir Ilahi and Khan, Sher Afghan and Bellary, Sayed Ahmed Imran and Alam, Noor and Muthuswamy, Sonachalam (2023) Analytical evaluation of loss mechanism effects on PDE performance with variation of refilling beta parameters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 66-78. E-ISSN 2289-7879

Zahid, Rehan and Bhutta, Muhammad Usman and Mufti, Riaz Ahmad and Abdullah, Muhammad Usman and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Muhammad Abul and Ali, Mian Ashfaq and Aslam, Jawad and Akhtar, Khalid (2021) Friction and Wear Performance Evaluation of Bio-Lubricants and DLC Coatings on Cam/Tappet Interface of Internal Combustion Engines. Materials, 14 (23). pp. 1-23. ISSN 1996-1944

Zen, Irina Safitri and Al-Amin, Abul Quasem and Alam, Md Mahmudul and Doberstein, Brent (2021) Magnitudes of households’ carbon footprint in Iskandar Malaysia: Policy implications for sustainable development. Journal of Cleaner Production, 315. pp. 1-14. ISSN 0959-6526 E-ISSN 1879-1786

Book

Toha @ Tohara, Siti Fauziah and Idris, Ahmad Syahrin and Abdullah, Muhammad Adli (2021) An interleaved DC charging system in electric vehicle: computational intelligence based MPPT controller. LAP LAMBERT Academic Publishing. ISBN 978-620-4-21110-7

Book Chapter

Ali, Maisarah and Jahn Kassim, Puteri Shireen (2010) Ministry of Energy, Water, Communication (MEWC) building Putrajaya, Malaysia. In: Sustainable buildings in practice. Routledge, pp. 295-303. ISBN 9780415399326

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2017) Effect of periodic drying on energy utilization, product quality, and drying time. In: Intermittent and nonstationary drying technologies: principles and applications. Advances in Drying Science and Technology . CRC Press - Taylor & Francis Group, Florida, USA, pp. 19-32. ISBN 9781138746299

Proceeding Paper

Ahmad Jasmi, Siti Zulaiha and Ayob, Mohd Fairullazi (2015) Evaluating energy efficiency of lighting system in university library building. In: 14th Management in Construction Research Association (MiCRA 2015) Conference and Annual General Meeting, 12th-13th Nov. 2015, Kulliyyah of Architecture and Environmental Design (KAED) International Islamic University Malaysia (IIUM). (Unpublished)

Ahmed, Mirghani Ishag and Seder, Islam M.F. and Ahmed, Shugata (2014) Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines. In: International Conference on Materials, Mechatronics, Manufacturing & Mechanical Engineering, 24-25 Oct 2014, Kuching , Sarawak, Malaysia . (Unpublished)

Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. In: International conference on Materials,Mechatronics, Manufacturing & Mechanical Engineering 2014, 24th-25th September 2014, Kuching , Sarawak, Malaysia . (Unpublished)

Alkalbani, Abdullah Said and Md Tap, Abu Osman and Mantoro, Teddy (2013) Energy consumption evaluation in trust and reputation models for wireless sensor networks. In: The 4th International Conference on Information & Communication Technology for the Muslim World (ICT4M), 25-27 Mar 2013, Rabat, Moroco.

Amin, Zakaria Mohd. and Hawlader, Mohammad Nurul Alam and Karim, Azharul (2011) A solar assisted heat pump system for desalination. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE '11), 17-19 May 2011, Kuala Lumpur.

Arifutzzaman, A. and Maleque, Md. Abdul (2012) Reverse engineering of automotive piston. In: IRIIE2012, 21-22 Feb 20112, CAC, IIUM. (Unpublished)

Asmadi, M. Solleh and Md. Kasmani, Ruhaila and Siri, Zailan and Saleh, Habibis and Mt Aznam, Suazlan (2023) Relevance of various cavity aspect ratios to the thermal behavior of natural convection heat transfer for water-based hybrid nanofluid within a U-shaped enclosure. In: 14. International Conference on Computational Heat and Mass Transfer, 4-8 September 2023, Düsseldorf, Germany. (Unpublished)

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Mohamed Ariff, Tasnim Firdaus (2014) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23th-25th September 2014, Kuala Lumpur. (Unpublished)

Bashir, Musavir and Rajendran, Parvathy and Khan, Sher Afghan (2018) Energy harvesting from aerodynamic instabilities: Current prospect and future trends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Hawlader, M N A and Amin, Zakaria Mohd (2011) A desalination system utilizing solar ambient and waste energy. In: Qingdao International Conference 2011---on Desalination and Water Reuse, June 20-23, 2011, Qingdao, China. (Unpublished)

Hawlader, Mohammad Nurul Alam and Bahar, Rubina and Ng, K. C. and Loh, Jian Wei Stanley (2011) Transport analysis of an Air Gap Membrane Distillation (AGMD) process. In: Qingdao International Conference 2011---on Desalination and Water Reuse, June 20-23, 2011, Qingdao, China. (Unpublished)

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, Md. Mustafizur (2021) Comparative study on performance of flat plate and evacuated tube collectors solar water heater system. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,, 22 – 23rd June, KOE, IIUM (virtual). (Unpublished)

Ibrahim, Md. Najib and Sanusi, Aliyah Nur Zafirah and Ali, Maisarah and Aziz Ahmed, Soran Hama (2013) Parametric study of earth-to-air heat exchanger in Malaysian climate. In: The Asian Conference on Sustainability, Energy and the Environment 2013, 6-9 June 2013, Osaka, Japan.

Kamaru Azman, Auni Nur Sabrina and Elgharbawy, Amal A.M. (2022) The contribution of green buildings in reducing asthma morbidity among children. In: 14th International Green Energy Conference (IGEC-XIV) 2022, 04th-8th July 2022, Virtual. (Unpublished)

Khan, Sher Afghan and Sellappan, Rathakrishnan (2000) Active control of suddenly expanded flow. In: 22nd International Symposium on Space Technology and Science (iSTS), 28th May-4th June 2000, Morioka, Japan.

Manaf, Hazli and Ahmed, Shugata and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) A triangular double layer microchannel heat sink: effect of parallel and counter flow. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Mohd. Din, Shamzani Affendy and Lamarana Bah, Mamadou (2022) Carbon footprint assessment of the construction materials and energy usage of KICT building in IIUM. In: Regional Conference in Civil Engineering and Sustainable Development Goals in Higher Education Institutions 2021, 22 - 23 January 2022, Skudai,Johor. (Unpublished)

Mohiuddin, A. K. M. and Basran, Norasyikin and Khan, Ahsan Ali (2018) Modelling and validation of proton exchange membrane fuel cell (PEMFC). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 Aug 2017, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Mt Aznam, Suazlan and Shoji, Mori and Ryuta, Yanagisawa and Kunito, Okuyama (2015) Critical heat flux enhancement in saturated pool boiling using water-based nanofluid with honeycomb porous plate. In: The 23rd International Conference on Nuclear Engineering, 17th-21st May 2015, Chiba, Japan.

Nor Hairin, Assayidatul Laila and Mohd Yusaini, Nurul Batrisyia and Othman, Raihan and Mohd Salled, Mohd Faiz (2023) Synthesis and characterization of intrinsic CuO-ZnO semiconductor for thermoelectric cell using electrodeposition method. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Romadhon, Rahmat and Ali, Maisarah and Mohd Mahdzir, Ayub and Abdalla Abakr, Yousif (2009) Optimization of cooling systems in data centre by computational fluid dynamics model and simulation. In: Conference on Innovative Technologies in Intelligent Systems and Industrial Applications (CITISIA 2009) , 25-26 July 2009, Sunway Campus, Malaysia.

Sugumaran, Luvindran and Mohd Zubir, Mohd Nashrul and Kazi, Salim Newaz and Tuan Zahari, Tuan Zaharinie and Mt Aznam, Suazlan and Mohd Halil, Aiman (2023) Experimental investigation of nucleate pool boiling heat transfer characteristics on modified copper surface via laser-structured microstructures. In: 6th International Conference on Clean Energy and Technology 2023, 7-8 June 2023, Bayview Hotel Penang, Malaysia. (Unpublished)

Zuhdi, Amirul Hakim and Islam, Mazharul (2017) Performance analyses of horizontal axis wind turbines using QBlade. In: First Biannual Engineering Conference on Undergraduate Research (1st- BiECUR 2017), 17th Jan. 2017, Kuala Lumpur. (Unpublished)

Monograph

Bahar, Rubina and Ariff, Tasnim Firdaus (2016) Enhanced freshwater production from waste/brackish/saline water in remote arid areas using specially designed coolant plates. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)

Bahar, Rubina and Ariff, Tasnim Firdaus and Ismail, Yusof (2017) Investigation of polarization in membrane distillation (MD) process and its energy efficient solution for freshwater production in Malaysian households. Project Report. UNSPECIFIED. (Unpublished)