Items where Subject is "T Technology > T Technology (General) > T175 Industrial research. Research and development"

Article

Amin, Zakaria Mohd. and Maswood, Ali. I. and Hawlader, Mohammad Nurul Alam and Al-Ammar, Essam and Orfi , Jamel and Al-Ansari, Hani (2013) Desalination with a solar-assisted heat pump, an economic optimization. IEEE Systems Journal, 7 (4). pp. 732-741. ISSN 1932-8184

Mushtaq, Umer and Mohamad, Souad A. (2013) ZnxCd1-x (O) thin film nanorods for PV applications. International Journal of Nano Science and Technology, 1 (3). 9 -16. ISSN 2328-5443 (O)

Abd Malek, Zetty Akhtar and Rahman, Md Mustafizur and Kadirgama, Kumaran and Rahman, Saidur and Maleque, Md. Abdul (2020) Thermal conductivity and viscosity of TiO2/MWCNTs (doped 10wt% graphene) - ethylene glycol based nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 32-46. ISSN 2289-7879

Abdul, Siti Kholijah and Abu Bakar, Mohd Rushdi and Adam, Fatmawati and Jamal, Parveen and Alam, Md. Zahangir (2017) Investigating the role of molecular interactions in polymorphism of mefenamic acid in ethyl acetate solution. Jurnal Teknologi, 79 (5-3). pp. 21-27. E-ISSN 2180-3722

Abdul Aziz, Mohammad and Embong, Abd Halim and Rashid, Muhammad Mahbubur and Saadeddin, Mhd Salim (2019) Design and material analysis of regenerative dispersion Magnetorheological (MR) damper. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 305-307. ISSN 2277-3878

Abdul Aziz, Mohammad and Rashid, Muhammad Mahbubur and Roy, Rupal and ., Arifuzzaman (2019) Design and performance test of a compressed air operated reciprocating machine. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 210-215. E-ISSN 2277-3878

Abdul Mudalip, Siti Kholijah and Abu Bakar, Mohd Rushdi and Jamal, Parveen and Adam, Fatmawati and Alam, Md Zahangir (2016) Molecular recognition and solubility of mefenamic acid in water. Asian Journal of Chemistry, 28 (4). pp. 853-858. ISSN 0970-7077 E-ISSN 0975-427X

Abdul Rahman, Siti Husna and Chastan, Nevin Gabriel and Haw, Su-Cheng and Zainuddin, Ahmad Anwar (2023) Blockchain malware detection tool based on signature technique. Advances in Artificial Intelligence and Machine Learning, 3 (4). pp. 1654-1670. ISSN 2582-9793

Abdul Rashid, Khairuddin and Hasan, Sharina Farihah and Mohd Fauzi, Puteri Nur Farah Naadia and Aripin, Srazali and Ahmad Sarkawi, Azila (2018) Zakat and wakaf funded housing for the poor and needy – an analysis of the zakat and wakaf authorities roles from the authorities’ perspectives. Journal of the Malaysian Institute of Planners. ISSN 1675-6215 E-ISSN 0128-0945 (In Press)

Abdul Rashid, Khairuddin and Preece, Christopher Nigel (2010) Editorial. Journal of Quantity Surveying & Construction Business, 1 (2). vi-vii. ISSN 22298339

Abdullah, Aziera and Yusoff, Siti Hajar and Zaini, Syasya Azra and Midi, Nur Shahida and Mohamad, Sarah Yasmin (2019) Energy efficient smart street light for smart city using sensors and controller. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 558-568. ISSN 2089-3191 E-ISSN 2302-9285

Abdullah, Nur Azam (2024) BRICS membership enables Malaysia to progress with advanced tech. New Straits Times, 21 June 2024.

Abdullah, Nur Azam (2021) Energy-harvesting via wind interaction: a sustainable flight is a dream for the development of modern aircraft. @green, 1 (8). pp. 20-21. ISSN 2756-7818

Abdullah, Nur Azam and Azami, Muhammad Hanafi (2021) Penerokaan angkasa lepas buka potensi teknologi aras tinggi. Berita Harian: Rencana, 24 September 2021. p. 10.

Abdullah, Nur Azam and Azami, Muhammad Hanafi (2021) Potensi industri getah dalam pembangunan teknologi aeroangkasa. Berita Harian, 19 April 2021. p. 12.

Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Akbar, Mahesa (2018) Aeroelastic assessment of cracked composite plate by means of fully coupled finite element and Doublet Lattice Method. Composite Structures, 202 (SI:Ian Marshall). pp. 151-161. ISSN 0263-8223

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor Iqram (2021) Numerical modelling of bird strike on aerospace structures by means of coupling FE-SPH. International Journal of Integrated Engineering, 13 (7). pp. 185-193. ISSN 2229-838X E-ISSN 2600-7916

Abdullah Habib, Siti Nora Haryati and Ismail, Syuhaida and Syed Khuzzan Alhabshi, Sh Mazlina (2020) Risk factors towards Public-Private Partnerships (PPP) projects implementing building information modelling (BIM) in the United Kingdom (UK): a lesson learnt for Malaysia. PLANNING MALAYSIA : Journal of the Malaysian Institute of Planners, 18 (4). pp. 340-351. ISSN 1675-6215 E-ISSN 0128-0945

Abuhamed, Nader and Ahmad, Zuraida and Tajuddin, Maisarah (2020) Effects of halloysite nanotubes (HNT) structures on antimicrobial activity on TPSS Film. Malaysian Journal of Microscopy, 16 (2). pp. 119-127. ISSN 1823-7010, E-ISSN 2600-7444

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Iqbal, Mohammed (2013) Synergistic effect on flexural properties of kenaf-glass hybrid composite. Advanced Materials Research, 626. pp. 989-992. ISSN 1022-6680

Ahmad, Zuhairi and Azman, Nur Shahira Azlyn and Md. Rosli, Nur Suhaila and Mustapa, Mohd Zaini (2020) Land-use classification and mapping using landsat imagery for GIS database in Langkawi Island. Science Heritage Journal (GWS), 4 (2). pp. 40-44. ISSN 2521-0858 E-ISSN 2521-0866

Ahmad, Zuraida and Sarifuddin, Nurshahida and Iis, Sopyan and Halim, Zahurin (2011) Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal, 12 (1). pp. 63-75. ISSN 1511-788X

Ahmad Hassan, Nurhidayah and Amid, Azura and Mohd. Salleh, Hamzah (2013) Cloning and expression of Voltage-dependent Anion Channel 2 (VDAC2) from electrically stimulated chicken. Journal of Pure and Applied Microbiology, 7 (Spec.). pp. 43-52. ISSN 0973-7510

Al Hazza, Muataz Hazza Faizi and Md Yusof, Nabilah and -, Nur Amirah Najwa and -, Mohd Eikhwan and -, Mohamad Khazairul and Taha, Assem Hatem (2013) Experimental study of flank wear in high speed turning of stainless steel AISI 304. Journal of Advanced Science and Engineering Research, 3 (2). pp. 96-103. ISSN 2231-8844

Alhattab, Yousef Abd and Zainal Abidin, Zulkifli and Faizabadi, Ahmed Rimaz and Mohd Zaki, Hasan Firdaus and Ibrahim, Ahmad Imran (2023) Integration of stereo vision and MOOS-IvP for enhanced obstacle detection and navigation in unmanned surface vehicles. IEEE Access, 11. pp. 128932-128956. E-ISSN 2169-3536

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2018) Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology, 7 (3). pp. 32-39. E-ISSN 2227-524X

Amin, A. K. M. Nurul and Begum, Mst. Nasima and Fathiah, Noor and Konneh, Mohamed and Ariff, Tasnim Firdaus (2016) An experimental approach to determine the critical depth of cut in brittle-to-ductile phase transition during end milling of soda lime glass. Arabian Journal for Science and Engineering, 41 (11). pp. 4553-4562. ISSN 1319-8025 E-ISSN 2191-4281

Amin , Zakaria Mohd. and Hawlader, Mohammad Nurul Alam (2013) A review on solar assisted heat pump systems in Singapore. Renewable and Sustainable Energy Reviews, 26. pp. 286-293. ISSN 1364-0321

Anuar, Hazleen and Abu Bakar, Nur Fatin Izzati and Syed Mustafa, Sharifah Nurul Inani and Mohd Apandi, Siti Nur E’zzati and Abd Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshir, Mohd. Romainor (2017) Impregnation of cinnamon essential oil into plasticised polylactic acid biocomposite film for active food packaging. Journal of Packaging Technology and Research, 1 (3). pp. 149-156. ISSN 2520-1034 E-ISSN 2520-1042

Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2013) Design improvements and fabrication of conveyor belt cleaner and washing system at Westports Malaysia. International Journal of Education and Research, 1 (10). pp. 11-26. ISSN 2201-6333 (Print) ISSN: 2201-6740 (Online)

Ariff, Tasnim Firdaus and Mohamed, Nur Maizatul Nasyiin and Binafif, Abdulaziz Abdullah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A.K.M. Nurul (2018) Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718. International Journal of Engineering Research & Technology (IJERT), 7 (10). pp. 244-247. ISSN 2278-0181

Ariff, Tasnim Firdaus and Zolkapli, Farah Farhana and Sapuan, Farah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering. International Journal of Engineering Research and Application, 8 (12 Part I). pp. 51-56. ISSN 2248-9622

Asan Gani, Abdul Muthalif and Kasemi, Hasanul and Nordin, Nor Hidayati Diyana and Rashid, Muhammad Mahbubur and Mohd Razali, Muhammad Khusyaie (2017) Semi-active vibration control using experimental model of magnetorheological damper with adaptive F-PID controller. Smart Structures and Systems, An International Journal, 20 (1). pp. 85-97. ISSN 1738-1584

Asgari, Nasrin and Avakh Darestani, Soroush and Ismail, Md Yusof and Ahmadpour, Leila (2023) Balanced scorecard model based on quality management system requirements: evidence from the Iranian ferro industry. International Journal of Business Excellence. ISSN 1756-0047 E-ISSN 1756-0055 (In Press)

Azhar, Nur Aida Elyna and Suhaimi, Abu Dzar and Amir, Adibah and Syed Shaharuddin, Sharifah Imihezri and Mohd. Zaki, Syazwani (2021) Towards smart & sustainable farming of Kelulut at IIUM. E-Bulletin TACTIC, 1. pp. 1-17.

Azmy, Udaimatunnoor and Ahmad, Zuraida and Ahmad Shahrim, Nur’Aishah Ahmad and Azman, Amelia Wong and Fajingbesi, Fawwaz Eniola (2020) Effects of silver nanoparticles concentration on resistivity of PEDOT: PSS thin conductive films. Test Engineering and Management, 83 (May - June 2020). pp. 1008-1013. ISSN 0193-4120

Bahar, Rubina and Hawlader, Mohammad Nurul Alam (2012) Study of falling film evaporation process in a vapor compression desalination system. Desalination and Water Treatment, 39 (1-3). pp. 21-32. ISSN 1944-3994 (O), 1944-3986 (P)

Bahrudin, Fadzli Irwan (2024) Boost EV industry, environment through responsible LiBs' management. New Straits Times.

Bahrudin, Fadzli Irwan and Liew, Yong Kian and Ismail, Zati Hazira (2022) The development of bacterial cellulose biomaterials using the material design-driven approach for packaging industry. Idealogy Journal, 7 (1). pp. 41-59. E-ISSN 2550-214X

Bensenouci, Djamel and Merabet, Boualem and Ozkendir, Osman M. and Maleque, Md. Abdul (2022) Nanostructured AlGaAsSb materials for thermophotovoltaic solar cells applications. Nanomaterials, 12 (19). pp. 1-14. ISSN 2079-4991

Che Haron, Roziha (2024) Unveiling the role of quantity surveyor forensic in the construction industry. BERITA QS (8). pp. 9-12.

Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)

Crasta, Asha and Pavithra, S and Khan, Sher Afghan (2016) Estimation of surface pressure distribution on a delta wing with curved leading edges in hypersonic/supersonic flow. International Journal of Energy, Environment, and Economics, 24 (1). pp. 67-73. ISSN 1054-853X

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Rahman, Mohammed Ataur (2014) Design and fabrication of a simple cost effective spin coater for deposition of thin film. Advances in Environmental Biology, 8 (3). pp. 729-733. ISSN 1995-0756

Fouz, Nour and Amid, Azura and Hashim, Yumi Zuhanis Has-Yun (2014) Cytokinetics study on MCF-7 cells treated with commercial and recombinant bromelain. Asian Pacific Journal of Cancer Prevention, 14 (11). pp. 6709-6014. ISSN 1513-7368

Halim, Zahurin and Ahmad, Zuraida and Tajuddin, Maisarah (2020) Physical consolidation of rattan furniture waste fibers in self-bonded boards under morphological analysis. Malaysian Journal of Microscopy, 16 (2). pp. 112-118. ISSN 1823-7010 E-ISSN 2600-7444

Hanapiah, Hairulhaziq and Toha, Siti Fauziah and Malik, Hafizi and Idris, Ahmad Syahrin (2022) Low-cost modular battery monitoring system for small scale testing. PERINTIS eJournal, 12 (2). pp. 56-68. ISSN 2232-0725

Hanifah, Rabiatul A. and Toha @ Tohara, Siti Fauziah and Ahmad, Salmiah (2015) Electric vehicle battery modelling and performance comparison in relation to range anxiety. Procedia Computer Science, 76. pp. 250-256. ISSN 1877-0509

Hartomo, Hartomo and Hassan, Azmi and Che Haron, Che Hassan and Md Deros, Baba and Iqbal, Mohammad (2003) A biomechanical analysis of lifting technique: a comparative study of back lift and leg lift in the manufacturing industry. Jurnal Teknologi Industri, 8 (4). pp. 311-320. ISSN 0583-8697

Hasbullah, Nurul Fadzlin and Mohd Khairi, Mohamad Azim and Abdullah, Yusof (2019) Response of electron-irradiated silicon carbide Schottky power diodes at elevated temperature. International Journal of Power Electronics. pp. 1-13. ISSN 1756-638X E-ISSN 1756-6398 (In Press)

Hassan, Azmi and Basri, Hassan and Rahmat, Riza Atiq and Kasmiran, Jumari (2001) Traffic Detectors Using Image Processing Method (Pengesan Lalu Lintas Dengan Kaedah Pemprosesan Imej). Jurnal Kejuruteraan (13). pp. 3-20. ISSN 0128-0198

Hassan, Noor Azlina and Hassan, Norita and Johari, Norhasnidawani and Halim, Zahurin and Ahmad, Zuraida (2015) Mechanical properties of kenaf core sandwich panel toughened with modified epoxy. Advanced Materials Research, 1115. pp. 275-278. ISSN 1662-8985

Hawlader, Mohammad Nurul Alam and Mohd. Amin, Zakaria (2012) Desalination of seawater using solar, ambient energy and waste heat from air conditioning system. Desalination and Water Treatment, 42 (1-3). pp. 235-240. ISSN 1944-3994 (O), 1944-3986 (P)

Hazim Johari, Muhammad Zaid and Shafie, Mohamad Amir Syakirin and Zainuddin, Ahmad Anwar and Shamsudin, Abu Ubaidah and Annas, Ammar Haziq and Bharudin, Mohamad Syafiq Asyraf and Mahazir, Mohamad Nur Badri and Ahmad Razmi, Alin Nur Maisarah and Kamarul Zaman, Nur Anis Sofea and Muhammad Zahid, Nur Adlin (2023) Design and implementation of a smart safety system for rental cars using IoT and e-commerce mobile app integration for IIUM community. Malaysian Journal of Science and Advanced Technology (MJSAT), 3 (2). pp. 128-140. E-ISSN 2785-8901

Idris, Ahmad Syahrin and Malik, Hafizi and Toha, Siti Fauziah (2022) Geo-fencing location tracking system using IOT and LORA LPWAN for Covid-19 mandatory self-quarantine monitoring. PERINTIS eJournal, 12 (2). pp. 56-68. ISSN 2232-0725

Idris, Zulkarnain Mohamed and Jamal, Parveen and Alam, Md Zahangir (2012) Evaluation of palm oil mill effluent treatment with concomitant phenolics production by aspergillus niger IBS-103ZA. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 55-61. ISSN 1991-8178

Iftekar, Syed Fouzan and Sukindar, Nor Aiman and Amir, Adibah and Azami, Muhammad Hanafi and Aabid, Abdul (2023) Enhancing metal 3D printing with fused deposition modeling - a short review. International Journal of Research and Analytical Reviews (IJRAR), 10 (2). pp. 424-428. ISSN 2349-5138 E-ISSN 2348-1269

Iqbal, Mohammad and Purnomo, Muhammad Ridwan Andi and Mohd Imra, Muhammad Ammar and Konneh, Mohamed and Karim, A.N. Mustafizul (2012) The study on production performances of part transporter in flexible manufacturing system by using simulation method. Advanced Materials Research, 576. pp. 714-717. ISSN 1022-6680

Jahurul, M. H. A. and Shian, O. K. and Sharifudin, M. S. and Hasmadi, M. and Lee, J. S. and Mansoor, A. H. and Jumardi, R. and Firoz Khan, M. and Jinap, S. and Mohd Omar, A. K. and Sarker, Md. Zaidul Islam (2020) Effects of drying methods on oxidative stability of roselle seed oil (Hibiscus Sabdariffa): an optimization approach. Journal of Food Science and Technology. ISSN 0022-1155 E-ISSN 0975-8402

Jamhari, Fathin Illiana and Ahmad, Zuraida and Tajuddin, Maisarah and Abuhamed, Nader (2020) Allium sativum as antimicrobial agent in Thermoplastic Sago Starch (TPSS) films for dermal wound healing. Test Engineering and Management, 83 (May-June). pp. 1014-1019. ISSN 0193-4120

Jamlus, Nur Dini Farzana and Che Haron, Roziha (2024) The challenges of the Internet of Things (IoT) in the context of construction cost management. Journal of Architecture, Planning and Construction Management, 14 (1). pp. 20-36. ISSN 2231-9514 E-ISSN 2462-2222

Karim, A.N. Mustafizul and Begum, Shahida (2014) Enhanced performance of zinc oxide arrester by simple modification in processing and design. Journal of Material Science & Engineering, 3 (1). pp. 1-6. ISSN 2169-0022

Kourra, Nadia and Warnett, Jason and Attridge, Alex and Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart and Williams, Mark and UNSPECIFIED (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. ISSN 0268-3768 E-ISSN 1433-3015

M Zeki, Akram (2021) Research and publications in Islamic perspective (Part 1). KICT Newsletter, 1 (1). p. 7.

M. H. A., Jahurul and Sarker, Md. Zaidul Islam and Beh, Leykey and M. S, Sharifudin and Siddiquee, Shafiquzzaman and Mamat, Hasmadi and Ferdosh, Sahena and Abdul Hamid, Mansoor and Lee, J.S. and Selamat, Jinap (2019) Valuable components of bambangan fruit (Mangifera pajang) and its coproducts: A review. Food Research International, 115. 105 -115. ISSN 0963-9969

Mahmood, M. H. and Maleque, Md. Abdul and Rahman, M.M. Hafizur (2022) Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5). pp. 6013-6023. ISSN 2193-567X E-ISSN 2191-4281

Maleque, Md. Abdul (2012) Aluminium-copper-SiCp composite materials corrosion in biodiesel. Advanced Materials Research, 576. pp. 425-428. ISSN 1022-6680

Maleque, Md. Abdul and Afdzaluddin, Atiqah and M., Iqbal (2012) Flexural and impact properties of kenaf-glass hybrid composite. Advanced Materials Research, 576. pp. 471-474. ISSN 1022-6680

Maleque, Md. Abdul and Arifutzzaman, Abul (2014) Effect of copper on tensile strength improvement of Al-Cu-SiCp new composite. Materials Science Forum, 773-77. pp. 541-546. ISSN 1662-9752

Maleque, Md. Abdul and B, Merabet and Ozkendir, Osman Murat and A. S., Hassanien (2021) Optical and structural characterization of (Mn, Fe) co-doped lead chalcogenides for optoelectronics applications. Journal of Optoelectronics and Advanced Materials, 23 (11-12). pp. 564-573. ISSN 1454-4164 E-ISSN 1841 - 7132

Maleque, Md. Abdul and Masjuki, H.H. (1997) Investigation of the anti-wear characteristics of palm oil methyl ester using a four-ball tribometer test. Wear, 206 (1-2). pp. 179-186. ISSN 0043-1648

Maleque, Md. Abdul and Masjuki, H.H. and Ishak, M. (1998) Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel. Tribology Transaction, 41 (1). pp. 155-159. ISSN 1040-2004

Mansor, Hafizah and Mohd Shani, Nur Shahirah Hafizah and Pradu, Arina (2021) Sensei No Kuruma : car advising system with digital forensic evidence. International Journal on Perceptive and Cognitive Computing, 7 (1). pp. 137-140.

Mazlan, Muhammad Amar and Hasan, Sharina Farihah (2023) The roles and responsibilities of the key players in the development of housing on waqf land in Malaysia. Journal of Islamic, Social, Economics and Development (JISED), 8 (54). pp. 18-27. E-ISSN 0128-1755

Md. Salleh, Mohammad Fahmy and Syed Khuzzan Alhabshi, Sh Mazlina and Hashim, Khairusy Syakirin Has-Yun (2014) Bridging the competencies gap between quantity surveyors and facilities managers. Journal of Technology Management and Business, 1 (2). pp. 73-86.

Mohamad, Souad A. and Alaei, Iraj and Sopyan, Iis (2013) Natural photosensitizers for dye sensitized solar cells. International Journal of Renewable Energy Research (IJRER), 3 (1). pp. 138-143. ISSN 1309-0127

Mohamad Jamil, Nur Arifah and Abd Razak, Najihah and Ismail, Izham Izzat and Nordin, Norhuda Hidayah and Azami, Muhammad Hanafi (2024) Composition, characterization and performance studies of hybrid rocket motor doped with metallic additives and high entropy alloy. Journal of Aeronautics, Astronautics and Aviation,, 56 (4). pp. 887-894. ISSN 1990-7710

Mohamad Talhah Al Hafiz, Mohd Khata and Sukindar, Nor Aiman and Md Yasir, Ahmad Shah Hizam and Muhammad Fikri, Zawawi and Kamaruddin, Shafie and Ab Aziz, Ahmad Azlan (2024) Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using DLP 3D printing. Malaysian Journal of Microscopy, 20 (1). pp. 189-200. ISSN 1823-7010 E-ISSN 2600-7444

Mohd Ariffin, Khairul Anuar and Sukindar, Nor Aiman and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2019) The effect of process parameters in extruding scaffold design using synthetic biomaterials. International Journal of Modern Manufacturing Technologies, XI (3). pp. 35-46. ISSN 2067–3604

Mohd Khairi, Mohamad Azim and Abdullah, Yusof and Ab Rahim, Rosminazuin and Hasbullah, Nurul Fadzlin (2019) Durability of 4H-SiC Schottky power diodes irradiated with high-energy bombarding electrons. IET Circuits, Devices & Systems, xx (xx). pp. 1-7. ISSN 1751-858X E-ISSN 1751-8598 (Unpublished)

Mohd Khata, Mohamad Talhah Al Hafiz and Sukindar, Nor Aiman and Zawawi, Muhammad Fikri and Md Yasir, Ahmad Shah Hizam and Kamaruddin, Shafie and Ab Aziz, Ahmad Azlan (2024) Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using dlp 3d printing. Malaysian Journal of Microscopy, 20 (1). pp. 189-200. ISSN 1823 7010 E-ISSN 2600 7444

Mohd Sopery, Luqman Hakim and Ayob, Mohd Fairullazi (2023) An investigation on sustainable refurbishment practice of building works in Malaysia. Journal of Architecture, Planning and Construction Management, 13 (1). pp. 29-39. ISSN 2231-9514 E-ISSN 2462-2222

Mohd Yusoff, Noraini and Nuge, Tamrin and Zainan, Nor Hidayah and Hashim, Yumi Zuhanis Has-Yun and Jamal, Parveen and Meor Hussin, Anis Shobirin and Farouk Gad, Abd. El-Aziem and Mohd. Salleh, Hamzah (2011) Preliminary investigation of Myo-Inositol Phosphates produced by Asuia279phytase on Mcf-7 cancer cells. IIUM Engineering Journal, 12 (4). pp. 141-151. ISSN 1511-788X

Mohd Zaki, Syazwani (2024) Gelling together. Materials World, 12 (6). pp. 38-40. ISSN 0967-8638

Mohd Zammari, Alya Farhani and Ayob, Mohd Fairullazi (2023) Data quality issues that hinder the implementation of Artificial Neural Network (ANN) for cost estimation of construction projects in Malaysia. Journal of Architecture, Planning and Construction Management, 13 (1). pp. 40-54. ISSN 2231-9514 E-ISSN 2462-2222

Molik, Sazib and Rashid, Muhammad Mahbubur and ., Md. Hasanuzzaman and Karim, Mohammed Ershadul and ., M. Hosenuzzaman (2016) Prospects, progress, policies, and effects of rural electrification in Bangladesh. Renewable and Sustainable Energy Reviews, 65. pp. 553-667. ISSN 1364-0321

Mukhtaruddin, Muna Tasnim and Alam, Md Zahangir and Mohd. Salleh, Hamzah (2012) Characterization of purified cellulase from fermentation of sewage sludge. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 74-78. ISSN 1991-8178

Mustafa, Aisyah Madihah and Abd Halim, Nor Farah Huda and Tomadi, Siti Haryani and Shahruddin, Najlah Sakinah and Nasaruddin, Ricca Rahman (2023) Analysis on tool wear during milling carbon fiber reinforced polymer in dry, coolant and chilled air condition. Jurnal Tribologi, 36 (March 2023). pp. 99-107. E-ISSN 2289-7232

Mustafa, Muhammad Hadi and Ali, Maisarah and Hashim, Khairusy Syakirin Has-Yun and Mohamad Suhaimi, Mohamad Saifulnizam (2020) A generic process of documentation and data management for historical Malay architecture using BIM. Planning Malaysia Journal of the Malaysian Institute of Planners, 18 (2). pp. 73-84. ISSN 1675-6215 E-ISSN 0128-0945

Nasrudin, Raimi Fariz and Samat, Noorasikin and Mokhtar, Nur Afiqah and Yacob, Norzita (2022) Production of cellulose nanocrystals from oil palm empty fruit bunch and pineapple leaf fibre using double oxidation approach. Jurnal Teknologi, 84 (5). pp. 73-81. E-ISSN 2180-3722

Nur Huda, Arif and Pebrianti, Dwi and Md Zain, Zainah (2023) Integrated robotic arm control: inverse kinematics, trajectory planning, and performance evaluation for automated welding. Asian Journal Science and Engineering, 2 (2). pp. 82-100. ISSN 2963-6752

Omar, Mohd Afian and Hassan, Norita (2016) Development of thermoplastic natural rubber (TPNR) as a new binder in metal injection moulding. Journal of Engineering Science, 12. pp. 43-51. ISSN 1823-3430

Paijan, Lailatul Harina and Maleque, Md Abdul and -, Suryanto (2020) Effect of SiC particle size on hardness and wear behavior of TIG melted hard surface layer AISI Duplex-2205 steel. TEST Engineering & Management, 83 (May-June). pp. 1392-1397. ISSN 0193-4120

Purnomo, Muhammad Ridwan Andi and Abdul Wahab, Dzuraidah and Hassan, Azmi and Rahmat, Riza Atiq (2009) A parallel genetic algorithm-based TSK-Fuzzy system for dynamic car-following modeling. European Journal of Scientific Research, 28 (4). pp. 628-642. ISSN 1450-216X, 1450-202X

Purnomo, Muhammad Ridwan Andi and Saleh, Chairul and Lagaida, Reny Lituhayu and Hassan, Azmi (2014) Knowledge-based genetic algorithm for multidimensional data clustering. Applied Mechanics and Materials, 606. pp. 277-280. ISSN 1660-9336

Rahman, Mohammed Ataur (2004) Mechanical properties in relation to vehicle mobility of Sepang peat terrain in Malaysia. Journal of Terramechanics, 41 (1). pp. 25-40. ISSN 0022-4898

Rahman, Mohammed Ataur and Abdul Razak, Fadhilah and Hawlader, Mohammad Nurul Alam and Rashid, Muhammad Mahbubur (2013) Nonlinear modeling and simulation of waste energy harvesting system for hybrid engine: fuzzy logic approach. Journal of Renewable and Sustainable Energy Editorial Office, 5. pp. 1-13. ISSN 1941-7012

Rahman, Mohammed Ataur and Ihsan, Sany Izan and Ismail, Ahmad Faris and Altab, Hossain (2024) Fuel cell hybrid electric air-cushion tracked vehicle for peat swamp. International Journal of Heavy Vehicle System, 31 (4). pp. 513-530. ISSN 1744-232X E-ISSN 1741-5152

Rahmat, Riza Atiq and Jumari, K. and Hassan, Azmi and Basri, H. (2001) Video detection system for traffic Iight sensor. Traffic Engineering and Control, 42 (11). pp. 386-390. ISSN 0041-0683

Rosdee, Nur Fadhilah Ajwa and Ali Azmi, Nur Nadiah and Mansor, Hafizah (2022) Simulation of in-vehicle network CAN (in)security. International Journal on Perceptive and Cognitive Computing, 8 (2). pp. 71-76. E-ISSN 2462-229X

Roslan, Muhammad Lukman and Nosruddin, Nur Afiqah Rahma and Mansor, Hafizah (2020) Glucorio – diabetes management system. International Journal on Perceptive and Cognitive Computing, 6 (2). pp. 124-128. E-ISSN 2462-229X

Sahari, J. and Maleque, Md. Abdul (2016) Mechanical properties of oil palm shell composites. International Journal of Polymer Science, 2016. pp. 1-7. ISSN 1687-9422 E-ISSN 1687-9430

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2013) Thermo-mechanical behaviours of thermoplastic starch derived from sugar palm tree (Arenga Pinnata). Carbohydrate Polymers, 92 (2). pp. 1711-1716. ISSN 0144-8617 (O)

Sahari, Japar and Sapuan, S.M. and Zainudin, E.S. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul and Zuhri, Mohd Y M and Akhtar, Riaz (2017) Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis, 14 (2 (Thematic Issue)). pp. 227-232. ISSN 1570-1794 E-ISSN 1875-6271

Sahir, Nurul Nadiah and Hassan, Noor Azlina and Hassan, Norita and Johari, Norhasnidawani and Surip, Siti Norasmah (2020) Effect of solid particles concentration to the size of graphene oxide liquid crystals pickering emulsion. TEST Engineering & Management, May -June 2020. pp. 1087-1092. ISSN 0193-4120

Samat, Noorasikin and Mohd Lazim, Nurul Hakimah and Halim, Zahurin (2019) Dynamic mechanical and water absorption properties of microcrystalline cellulose reinforced polypropylene composites: the effect of unconventional irradiation route. IIUM Engineering Journal, 20 (2). pp. 188-196. ISSN 1511-788X E-ISSN 2289-7860

Samat, Noorasikin and Mokhtar, Wan Nur Athirah and Zulkifli, Nur Izzati (2014) Properties of eco-friendly composite from recycled polypropylene. Advances in Environmental Biology, 8 (8 (spec. issue 3)). pp. 2760-2766. ISSN 1995-0756

Samat, Noorasikin and Nasrudin, Raimi Fariz and Engliman, Nurul Sakinah (2022) Fabrication of Poly(Vinyl) Alcohol-Cellulose Nanocrystal hybrid aerogel. Materials Science Forum, 1074. pp. 11-16. ISSN 0255-5476 E-ISSN 1662-9752

Samat, Noorasikin and Sabaruddin, Fatimah Atiyah and Meor Yusoff, Meor Sulaiman and Abang Ismawi Hassim, Dayang Habibah (2017) Evaluation of waste from aluminum industry as filler in Polypropylene composites. The Journal of The Minerals, Metals & Materials Society, 69 (4). pp. 790-795. ISSN 1047-4838 E-ISSN 1543-1851

Samat, Noorasikin and Sarifuddin, Norshahida and Shafiee, Muhd Izzudin (2020) Reprocessing of polypropylene/cellulose composites: effects on thermal properties. Test Engineering and Management, 83. pp. 25906-259009. ISSN 0193-4120

Samsuri, Suhaila (2023) Encouraging effects of electronic games on mental health treatment: a perspective. KICT Newletter (1/2023). pp. 4-5.

Sapuan, S.M. and Harimi, M. and Maleque, Md. Abdul (2003) Mechanical properties of epoxy/coconut shell filler particle composites. Arabian Journal for Science and Engineering, 28 (2B). pp. 171-181. ISSN 1319-8025

Satriawan, Sukma and Setiawan, Agus and Pebrianti, Dwi and Md. Zain, Zainah (2024) The effect of pin length and compressive force in double side friction stir welding on bending strength of AA1100. Journal of Evrimata: Mechanical Engineering, 1 (1). pp. 9-13. E-ISSN XXXX-XXXX

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Triblas Adesta, Erry Yulian (2023) Enhancing sustainability index parameter using ANFIS computational intelligence model. IIUM Engineering Journal, 24 (2). pp. 258-268. ISSN 1511-788X E-ISSN 2289-7860

Suhaimi, Abu Dzar and Azhar, Nur Aida Elyna and Amir, Adibah and Syed Shaharuddin, Sharifah Imihezri and Mohd. Zaki, Syazwani (2021) Product design requirements for Kelulut hive. E-Bulletin TACTIC. pp. 1-17.

Sukindar, Nor Aiman (2022) Getting a 3D hold on food manufacturing. Asia Research News, 31 May 2022.

Sukindar, Nor Aiman (2023) Tech transfer boosts Sarawak’s handcraft businesses. Asia Research News (17 March 2023).

Sukindar, Nor Aiman and Ariffïn, M.K.A. and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing. Jurnal Teknologi, 78 (10). pp. 7-15. E-ISSN 2180–3722

Sukindar, Nor Aiman and Awang Dahan, Azib Azhari and Abd Halim, Nor Farah Huda and Kamaruddin, Shafie and Sulaiman, Mohd Hafis (2020) The Effect of Printing Parameters on Scaffold Structure Using Low-cost 3D Printer. TEST Engineering & Management, 82. 8255 -8263. ISSN 0193-4120

Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Ani, Mohd. Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Triblas Adesta, Erry Yulian (2022) A short review on the effect of nozzle geometry in 3D printing process using FDM system. ASEAN Journal of Engineering and Technology (AJET), 2 (2). pp. 1-4. E-ISSN 2710-5471

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Analysis of mechanical properties of polylactic acid using a new 3D printer nozzle. Journal of Computational and Theoretical Nanoscience, 15 (2). pp. 666-675. ISSN 1546-1955 E-ISSN 1546-1963

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Analysis on temperature setting for extruding polylactic acid using open-source 3D printer. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 1348-1353. ISSN 1819-6608

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Analysis on the impact process parameters on tensile strength using 3d printer repetier-host software. ARPN Journal of Engineering and Applied Sciences, 12 (102). pp. 3341-3346. ISSN 1819-6608

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Effects of nozzle die angle on extruding polymethylmethacrylate in open-source 3D printing. Journal of Computational and Theoretical Nanoscience, 15 (2). pp. 663-665. ISSN 1546-1955 E-ISSN 1546-1963

Sukindar, Nor Aiman and Mohd Samsuddin, Noorazizi and Syed Shaharuddin, Sharifah Imihezri and Kamaruddin, Shafie and Ahmad Azhar, Ahmad Zahirani and Yang, Chuan Chong and Ab Wahab, Muhammad Adil (2021) Implementation of 3D Printing Technology in the Food Industry. Scientific Review, 7 (4). pp. 50-54. ISSN 2413-8835 E-ISSN 2412-2599

Sukindar, Nor Aiman and Mohd Samsudin, Noorazizi and Syed Shaharuddin, Sharifah Imihezri and Kamaruddin, Shafie (2022) The effects of FDM printing parameters on the compression properties of polymethylmethacrylate (PMMA) using finite element analysis. International Journal of Integrated Engineering, 14 (2). pp. 86-92. ISSN 2229-838X E-ISSN 2600-7916

Ullah, Mohammad Habib and Gunawan, Teddy Surya and Sharif, Md. Raihan and Muhida, Riza (2012) Development of a electrically inspired low emission microcontroller based hybrid vehicle. American Journal of Applied Sciences , 9 (10). pp. 1729-1735. ISSN 1554-3641(O), 1546-9239 (P)

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Safiei, Wahaizad and Kadirgama, Kumaran and Maleque, Md. Abdul (2022) Effects of minimum quantity lubrication technique in different machining processes-a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 135-159. ISSN 2289-7879

Urmi, Wajiha Tasnim and Rahman, Md. Mustafizur and Wan Hamzah, Wan Azmi and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2020) Experimental investigation on the stability of 40% ethylene glycol based TiO2-Al2O3 hybrid nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879

Wilkinson, Shane M. and Liew, Chu W. and Mackay, Joel P. and Mohd. Salleh, Hamzah and Withers, Stephen G. and McLeod, Malcolm D. (2008) Escherichia coli glucuronylsynthase: an engineered enzyme for the synthesis of β-glucuronides. Organic Letters, 10 (8). pp. 1585-1588. ISSN 1523-7060

Yahaya, B. and Izman, S. and Konneh, Mohamed and Redzuan, Norizah (2014) Microwave hybrid heating of materials using susceptors- a brief review. Advanced Materials Research, 845. pp. 426-430. ISSN 1022-6680

Yusof, N.S.B. and Sapuan, S.M. and Sultan, M.T.H. and Jawaid, M. and Maleque, Md. Abdul (2017) Design and materials development of automotive crash box: a review. Ciência & Tecnologia dos Materiais, 29 (3 (September -December)). pp. 129-144. ISSN 0870-8312

Zainuddin, Ahmad Anwar and Sahak, Rohilah and Jusat, Nuaomi and Kaitane, Wonderful Shammah and Abdul Rahman, Siti Husna and Mohd Mansor, Ahmad Fairuzabadi and Ahmad Puzi, Asmarani and Affendi Yunos, Muhd Farhan and Abd Majid, Mohamed Ibrahim and Hamizan, Hasbullah and Mohd Ramly, Munirah and Subramaniam, Krishnan (2022) Modelling a Smart Parking Management System (SPMS) based on integrated IoT. Multidisciplinary Applied Research and Innovation (MARI), 3 (4). pp. 72-81. E-ISSN 2773-4773

Zakaria, Mushab and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Ahmad Rashidi, Syazwan and Mat Sah, Mohd Azizi (2019) Spring back of thick curved uni-directional carbon fibre reinforced composite laminate for aircraft structure application. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 224-228. ISSN 2277-3878

Zulkifli, Nur Izzati and Samat, Noorasikin and Anuar, Hazleen and Zainuddin, Norhazlin (2015) Mechanical properties and failure modes of recycled polypropylene/microcrystalline cellulose composites. Materials and Design, 69. pp. 114-123. ISSN 0261-3069

Zulkifli, Zahidah and Ismail, Ahsiah and Mat Surin, Ely Salwana and Okfalisa, Okfalisa (2024) Cyber security awareness model based on NIST (national institute of standards and technology) for secondary school students in Malaysia. Journal of Advanced Research in Applied Sciences and Engineering Technology, 61 (2). pp. 56-58. ISSN 2462-1943

Book

Sulaiman, Mohd Hafis, ed. (2019) Proceedings 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP). Tribology & Metal Forming Research Group, Perlis, Malaysia.

Hashim, Junaidah and Islam, Rafikul and Sidek, Shahrul Na'im and Abdul Rahman, Rozailin and Zakaria, Norshuhaida and Rahman, Mahbubar and Rosli, Nazreen and Abu Hanifah, Rabiatuladawiah (2018) National survey of Research and Development in Malaysian 2016. Ministry of Science, Technology and Innovation (MOSTI), Putrajaya.

Book Chapter

Abdullah, Kassim (2001) Study of factors affecting taper joint failures in modular hip implant using finite element modelling. In: Modeling Simulation and Optimization - Focus on Applications. Intech, pp. 121-134. ISBN 978-953-307-055-1

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor Iqram Meor (2022) LCO flutter instability on oscillating supersonic wing by means of linearized aerodynamic small disturbance theory. In: Structural Integrity Cases in Mechanical and Civil Engineering. Structural Integrity, 23 (2). Springer Nature Switzerland AG, Switzerland, pp. 13-28. ISBN 978-3-030-85645-8

Azwan, Muhammad and Maleque, Md. Abdul and Rahman, Mohammad Mustafizur (2020) TIG Torch melting as surface engineering technology. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier, UK, pp. 629-637. ISBN 978-0-12-813196-1

Kamaruddin, Shafie and Azmi, Nabilah and Sukindar, Nor Aiman (2022) Assembly sequence optimization using the bees algorithm. In: Enabling Industry 4.0 through Advances in Mechatronics. Lecture Notes in Electrical Engineering, 900 . Springer, Singapore, pp. 423-433. ISBN 978-981-19-2094-3

Khalifa, Othman Omran and Moez Khan, Imran and Assidiq, Abdulhakam A. M. (2011) A Hyperbola-pair based road detection system for autonomous vehicles. In: Intelligent Automation and Systems Engineering. Springer Science+Business Media, LLC 2011, pp. 367-377.

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Faizul, M. and Sapuan, S. M. (2014) Automotive bottom structure composite materials selection: digital logic and knowledge based system approach. In: Engineering composites: properties and applications. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 191-210. ISBN 9789673443963

Maleque, Md. Abdul and Idris, Nazrin and Rahman, Mohammad M. and Sayeed Hossain, Mohammad (2020) Particulate composite protective coating using conventional melting approach. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 510-516. ISBN 9780128035818

Maleque, Md. Abdul and Shaha, Sugrib Kumar and Razali, Nurul Nadirah (2018) Wear behavior of aluminium modified cast iron in comparison with conventional gray cast iron. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-7. ISBN 978-0-12-803581-8 (In Press)

Sukindar, Nor Aiman and Wan Abdul Hamid, Wan Luqman Hakim and Kamaruddin, Shafie (2021) Analysis of printing parameters for tensile test using finite element analysis. In: Intelligent Manufacturing and Mechatronics. Springer. ISBN 978-981-16-0865-0 (Unpublished)

Proceeding Paper

A. Mohamad Al-Batt’hi, Souad and Saheed, Olorunnisola Kola and Jamal, Parveen (2012) From wastes to health and wealth: a novel halal and healthy jam product from watermelon fruit wastes. In: IIUM Research, Invention and Innovation Exhibition 2012 , 22 February 2012, Gombak Malaysia. (Unpublished)

A. W. , Fatimatuzahraa and Baharuddin, Farahaina and Wan Yusoff, Wan Ahmad Yusmawiza (2011) The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), 25-28 September 2011, Langkawi, Malaysia. (Unpublished)

Ab Tahir, Aliff and Nik Wan Zainun, Wan Hairilamei and Sukindar, Nor Aiman (2018) Kajian kesan suhu terhadap proses pengeringan halwa terung asam dengan menggunakan ketuhar perolakan. In: 3rd National Research and Innovation Conference (NRICon2018), 19th September 2018, Kuching, Sarawak.

Abdelkarim, A.I and Sami Eusuf, MMR and Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa and Eusuf, Muhammad Abu (2013) Development of solar powered irrigation system. In: 5th International Conference on Mechatronics (ICOM2013), 2 - 4 July 2013, Berjaya Time Square, Kuala Lumpur, Malaysia.

Abdul Mudalip, Siti Kholijah and Abu Bakar, Mohd Rushdi and Jamal, Parveen and Adam, Fatmawati and Che Man, Rohaida and Sulaiman, Siti Zubaidah and Mohd Arshad, Zatul Iffah and Md. Shaarani, Shalyda (2018) Effects of solvents on polymorphism and shape of mefenamic acid crystals. In: Malaysia Technical Universities Conference on Engineering and Technology (MUCET 2017)., 6-7 Dec,2017, Penang.

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor iqram Meor (2021) Limit Cycle Oscillation (LCO) flutter of advanced high modulus graphite/epoxy composite oscillating supersonic wing. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 8 - 9 March 2021, Pulau Pinang.

Ahmad, Siti Khadijah and Arris, Farrah Aida and Wan Salim, Wan Wardatul Amani (2015) Low-cost microcontact printing for direct enzyme patterning on paper. In: 12th Asian Congress on Biotechnology (ACB 2015) , 15th-19th November 2015, Istana Hotel, Kuala Lumpur, Malaysia..

Ahmad Fadzillah, Nurrulhidayah and Che Man, Yaakob and Jamaludin, Mohammad Aizat and Rahman, Suhaimi Ab and Al-Kahtani, Hassan Abdullah M. (2011) Halal food issues from Islamic and modern science perspectives. In: International Conference on Humanities, Historical and Social Science (CHHSS) 2011, 21st-23rd October 2011, Cairo, Egypt.

Ahmad H.Osman, Rahmah (2018) مكانة البحث اللغوي في بناء الإنسان المتسلح بالعلم لمواجهة الثورة الصناعية. In: 2nd International Conference on Research, Language, and Education (ICORALE2018), 4th July 2018, Bandar Seri Putra, Kajang, Selangor. (Unpublished)

Ahmad Razi, Fatimah Azreen and Sutjipto, Agus Geter Edy and Mohamad, Souad A. (2012) Development of Cu-SiC composite for electrical discharge machining electrode using powder metallurgy technique. In: International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2012, 3-5 July 2012, Kuala Lumpur.

Aibinu, Abiodun Musa and Iqbal, Muhammad Imran and Nilsson, Mikael and Salami, Momoh Jimoh Emiyoka (2007) Automatic diagnosis of diabetic retinopathy from fundus images using digital signal and image processing techniques. In: Proceedings of the International Conference on Robotics, Vision, Information and Signal Processing (ROVISP2007), 28-30 November 2007, Penang, Malaysia.

Al-Bat’hia,, Souad A. M. and Buys, Yose Fachmi (2016) A Study on suitability of II-VI semiconductor /solid Polymer thin film junctions for Photovoltaic application. In: 5th International Advances In Applied Physics And Materials Science Congress And Exhibition, 16-19 April 2015, Turkey.

Al-Khatib, Ma'an Fahmi Rashid (2021) Responsible research and industry-academia partnership to enhance indigenous green technologies. In: The Malaysia International Water Convention (MIWC) 2021, 20-24 September 2021, Kuala Lumpur (Online).

Al-Khatib, Ma'an Fahmi Rashid and Muyibi, Suleyman Aremu and Omotayo, Amode Jeminat (2010) Production of activated carbon from (EFB) for removal of cadmium. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Al-Mamun, Abdullah and Al-Saadi, Mohammed A. and Muyibi, Suleyman Aremu and Alam, Md. Zahangir (2010) Modification of CDV reactor for carbon nanomaterialns production. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Alam, Md. Zahangir and Bari, Md. Niamul and Muyibi, Suleyman Aremu and Jamal, Parveen and Al-Mamun, Abdullah (2010) High yield Cellulosic Citric Acid. In: IIUM Research, Innovation and Invention Exhibition 2010 (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Alam, Md. Zahangir and M. Hanapi, Nur Hanis and Jamal, Parveen (2010) Novel raw material for Citric Acid production. In: IIUM Research, Innovation and Invention Exhibition 2010 (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Alawbali, Rakan Hatem Abbas and Mohamed Ariff, Tasnim Firdaus (2023) Enhancing the tool life of aluminium oxide (Al2O3) inserts using hybrid microwave energy in dry machining of high strength steel (KRUPP 6582). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.

Alias, Aminah and Mohamed Azmin, Nor Fadhillah and Amid, Azura and Ibrahim, Siti Noorjannah (2016) A review-implementations of hyperspectral images technology for food safety and quality. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Amid, Azura (2020) Empowering research mind and culture. In: Picoms Virtual Online Talk 2.0, 23rd Oct 2020, via FB live. (Unpublished)

Amin, Zakaria Mohd. and Maswood, Ali I. and Hawlader, Mohammad Nurul Alam and Al-Ammar, Essam A. and Orfi, Jamel and Al-Ansari, Hany A. (2012) Performance of Photovoltaic Systems with Solar Tracking in Singapore. In: International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur, Malaysia. (Unpublished)

Amir, Adibah and Mat Jebah, Ahmad Suhairi and Ahmad, Mohd Yazid (2021) Stingless bee honey as a halalan tayyiban superfood: the beekeepers challenges. In: Virtual International Halal Science Conference 2021, 13-14 July 2021, IIUM. (Unpublished)

Anjariny, Ahmed H. and Zeki, Akram M. and Hussin, Husnayati (2012) Assessing organizations readiness toward business intelligence systems: a proposed hypothesized model. In: International Conference on Advanced Computer Science Applications and Technologies , 26-28 Nov 2012, The Palace of Golden Horses- KL.

Arief, Rudi Kurniawan and Sukindar, Nor Aiman and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2023) Analysis of the adjusting bolts system’s contribution to levelling error of the heated bed in FDM 3D printer. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kuala Lumpur.

Arief Ichwan, Solachuddin Jauhari (2013) Halal issues in the mammalian cell culture for recombinant protein production. In: National Conference on Industry-Academia Joint Initiatives in Biotechnology 2013, 5 - 7 December 2013, Equatorial Hotel, Cameron Highlands. (Unpublished)

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, Syufiqa Nurfatin and Zahari, Siti Zulaikha and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2017) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Arifuzzaman, S. M. and Nordin, Anis Nurashikin and Mel, Maizirwan and Spray, David and Voiculescu, Ioana (2011) Study of cells attachment using impedance spectroscopy technique. In: ASME International Mechanical Engineering Congress and Exposition (ASME 2011), 11-17 November 2011, Denver Colorado. (In Press)

Ayob, Mohd Fairullazi (2019) How modified Delphi can help collect data from group of experts? In: Post Graduate Workshop of Research Methodology for the Built Environment for Masters and PhD students s (AED 6020, AED 6070 and AED 7070) in Semester 1, Session 2018/19, 10th April 2019, Kuala Lumpur. (Unpublished)

Ayob, Mohd Fairullazi (2022) Life Cycle Cost analysis for asset and facilities – optimizing investment on asset life cycle through crises. In: Webinar Half Day Seminar on Life Cycle Cost (LCC) for Asset and Facilities, 25th November 2022, Virtual Seminar via “GotoWebinar”. (Unpublished)

Ayob, Mohd Fairullazi (2021) Life Cycle Cost for road pavement maintenance and rehabilitation. In: Virtual Symposium 2021 on Geotechnics and Transportation Research, 26th August 2021, Microsoft Teams. (Unpublished)

Ayob, Mohd Fairullazi (2023) Overview of life cycle cost formulas and calculation. In: Webinar Half Day Seminar on “Life Cycle Cost Analysis (LCCA) for Asset Management”, 5th December 2023, Virtual Seminar. (Unpublished)

Azhari, Azmir and Idriss, A. N. M. and Maleque, Md. Abdul (2023) Comparative study on performance characteristics of modified alloy steels by TIG and water jet peening processes. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Baharom, Mohammad Haniff and Abdullah Habib, Siti Nora Haryati and Ismail, Syuhaida (2020) Contractual issues of intellectual property rights (IPR) in construction projects implementing Building Information Modelling (BIM) Level 2. In: 8th International Conference on Applied Science and Technology (ICAST 2020), Virtual Conference.

Banzomo, Bashir Ahmed and Salami, Momoh Jimoh Eyiomika and Khan, Md. Raisuddin (2014) Hardware implementation of ANFIS controller for gas-particle separations in wet scrubber system. In: 5th International Conference on Computer & Communication Engineering 2014, 23th -25th September 2014, Kuala Lumpur, Malaysia.

Che Haron, Faris and Hyder Ali, Roziha (2019) Acceptability of the concept of shariah compliant procurement in the Malaysian construction industry. In: 4th International Built Environment Undergraduate Research Competition (BEURC2019), 4th April 2019, University Malaya. (Unpublished)

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2020) An investigation of hole quality during drilling of carbon fibre reinforced plastic and titanium (Ti6Al4V) using tungsten carbide drills. In: 4th Advanced Materials Conference 2018 (AMC 2018), 27th - 28th November 2018, Kuching, Sarawak, Malaysia.

Dahnel, Aishah Najiah and Barnes, Stuart and Ascroft, Helen and Gloger, Maximilian (2015) Analysis of tool wear and hole quality during Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC)/titanium alloy (Ti6Al4V) stacks. In: ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, 13th-19th November 2015, Houston, Texas, USA.

Ghaithan Sadeq, Ghaithan and Sanusi, Aliyah Nur Zafirah and Abdullah, Fadzidah (2022) Solar power assessment for photovoltaic installation in Malaysia University campus. In: 3rd International Sustainability and Resilience Conference: Climate Change (ISRC 2021), 15th - 16th November 2021, Virtual Conference.

Hameed, Shihab A. and Abdulla, Shaima and Ershad, Mohd and Zahudi, Fauzan and Hassan Abdalla Hashim, Aisha (2011) New automobile monitoring and tracking model: Facilitate model with handhelds. In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.

Hameed, Shihab A. and Yuchoh, Habib and Al-Khateeb, Wajdi Fawzi Mohammed (2011) A model for ensuring data confidentiality: In healthcare and medical emergency. In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.

Haminuddin, Norsuhana and Abdullah, Nik Norasyira and Norazman, Nadhirah Husna and Azli, Aina Farahin and Fadzil, Nur Sakinah and Wan Shazli, Wan Nuriffa Azima and Mohd Fadzil, Nur Hidayah and Abd Rahman, Nur Hidayah (2019) Chetty: the unforgotten. In: Penang International Invention, Innovation and Design 2019 (PIID2019), 27th-28th March 2019, Permatang Pauh, Pulau Pinang.

Hawlader, Mohammad Nurul Alam (2012) Drying of food products under inert atmosphere using heat pump. In: The 2nd International Symposium on Processing & Drying of Foods, Vegetables and Fruits (ISPDFVF 2012), 18-19 June 2012, Malaysia.

Hazumi, Hazman and Ayob, Mohd Fairullazi and Md. Sharif, Harlina (2018) Creating a new normal for AFM services: 3D laser scanning to BIM for LCC application on built asset. In: The 3rd National Asset and Facility Management Convention (NAFAM 2018), 8th-9th Oct. 2018, Kuala Lumpur. (Unpublished)

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, Md. Mustafizur (2021) Comparative study on performance of flat plate and evacuated tube collectors solar water heater system. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,, 22 – 23rd June, KOE, IIUM (virtual). (Unpublished)

Hussein, Idyawati and Mahmud, Murni and Hj. Ibrahim, Huda and Ghazali, Masitah and Ahmad, Azizah (2019) UI sketching reskill for UX researchers. In: 2019 Asian CHI Symposium: Emerging HCI Research Collection, AsianHCI 2019, 5th April 2019, Glasgow, United Kingdom.

Ibrahim, Nuzulha Khilwani and Noordin, Mohamad Fauzan and Samsuri, Suhaila and Abu Seman, Muhamad Sadry and Ahmed Ali, Ahmed El-Mogtaba Bannga (2016) Isnad Al-hadith computational authentication: An analysis hierarchically. In: 6th International Conference on Information and Communication Technology for the Muslim World (ICT4M 2016), 22nd-24th November 2016, Jakarta, Indonesia.

Ibrahim, Nuzulha Khilwani and Samsuri, Suhaila and Abu Seman, Muhamad Sadry and Ahmed Ali, Ahmed El-Mogtaba Bannga and Kartiwi, Mira (2016) Frameworks for a computational Isnad authentication and mechanism development. In: 6th International Conference on Information and Communication Technology for the Muslim World (ICT4M 2016), 22nd-24th November 2016, Jakarta, Indonesia.

Ibrahim Exstara, Luqman Hakim and Ayob, Mohd Fairullazi (2023) Recycled bricks as an alternative construction materials in the Malaysian construction industry. In: INTERNATIONAL COMPETITION ON SUSTAINABLE EDUCATION 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Ismail, Nur Hazima Faezaa and Toha, Siti Fauziah (2013) State of charge estimation of a lithium-ion battery for electric vehicle based on particle swarm optimization. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications, 26-27 Nov 2013, Royal Bintang Kuala Lumpur.

Jamal, Parveen (2007) Animal feed with added bioprotein from agro industrial waste. In: International Trade Fair of Ideas, Inventions and New Products (IENA 2007), 1- 4 November 2007, Germany. (Unpublished)

Jamal, Parveen (2008) Bioscavengers from a novel source. In: America's Invention Trade Show (INPEX 2008), 11th - 14th June 2008, David L. Lawrence Convention Center, Pittsburgh, USA. (Unpublished)

Jamal, Parveen (2008) Innovative process of optimization using organic base for reactive lactic acid recovery. In: America's Invention Trade Show (INPEX 2008), 11th - 14th June 2008, David L. Lawrence Convention Center, Pittsburgh, USA. (Unpublished)

Jamal, Parveen (2007) Palm Industry Wastes: A Novel Source of Biophenols. In: International Trade Fair of Ideas, Inventions and New Products (IENA 2007), 1- 4 November 2007, Germany. (Unpublished)

Jamal, Parveen (2008) Process optimization for biofeed production from renewable biopolymers. In: America Invention Trade Show (INPEX 2008), 11th - 14th June 2008, David L. Lawrence Convention Center, Pittsburgh, USA.

Jamal, Parveen and Alam, Md. Zahangir and Idris, Zulkarnain Mohamed (2010) A novel process development for production of Phenolic Acids with high scavenging activity from palm oil mill effluent. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Mohd Salleh, Mohammad Ramlan and Nadzir, Masrina M. (2006) Bioconversion process for microbial treatment of palm oil mill effluent to produce citric acid. In: International Conference on Agricultural Wastes, 21-23 March, 2006, Putrajaya, Malaysia.

Jamal, Parveen and Alam, Md. Zahangir and Mohd Salleh, Mohammad Ramlan and Nadzir, Masrina M. and Akib, Munirah M. (2006) Liquid state bioconversion of organic residues for production of citric acid by Aspergillus niger. In: 17th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX'06), 19th - 21st May 2006, Kuala Lumpur Convention Centre, Malaysia. (Unpublished)

Jamal, Parveen and Azmi, Saiful Mohammad Nizam and Amid, Azura (2011) Carica papaya leaves: a novel and safe source of Xanthine Oxidase Inhibitor (XOI) as gout-remission agent. In: IIUM Research, Invention and Innovation Exhibition 2011 (IRIIE) 2011, 9 - 10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Jamal, Parveen and Azmi, Saiful Mohammad Nizam and Amid, Azura (2010) Screening and optimization of process conditions for extraction of Xanthine Oxidase Inhibitor from potential local medicinal plants. In: IIUM Research, Innovation and Invention Exhibition 2010 (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Jamal, Parveen and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Osman, Fatiha and Rami, Norsyahida (2007) New process development for lactic acid recovery. In: International Exposition of Research and Inventions of Institutions of Higher Learning 2007 (PECIPTA'07), 10th - 12th August 2007, Kuala Lumpur Convention Centre, Malaysia. (Unpublished)

Jamal, Parveen and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Osman, Fatiha and Rani, Norsyahida (2008) Innovative process optimization using organic base for reactive lactic acid recovery. In: Malaysian Technology Expo (MTE 2008) , 21 - 23 February 2008, PWTC, Kuala Lumpur. (Unpublished)

Jamal, Parveen and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Osman, Fatiha and Rani, Norsyahida (2007) Reactive lactic acid extraction by new process optimization using organic base. In: Kulliyyah of Engineering Research and Innovation Exhibition (KERIE 2007), 12th - 13th December 2007, Cultural Activity Centre (CAC), International Islamic University Malaysia. (Unpublished)

Jamal, Parveen and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Syahida, N (2008) Optimization of process conditions for lactic acid recovery using organic base. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, 25 – 28 June 2008, Kuala Lumpur, Malaysia.

Jamal, Parveen and Wan Nawawi, Wan Mohd Fazli and Alam, Md. Zahangir (2011) New development of process in bioreactor for biosurfactant from a novel source. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

Jamal, Parveen and Wan Nawawi, Wan Mohd Fazli and Alam, Md. Zahangir (2010) Sludge palm oil - novel source for biosurfactant production. In: IIUM Research, Innovation and Invention Exhibition 2010 (IRIIE 2010), 26 - 27 January 2010, Cultural Activity Centre (CAC), IIUM. (Unpublished)

Jamaluddin, Mohd Jamil Aizat and Amid, Azura and Azmi, Azlin Suhaida and Othman, Muhd. Ezza Faiez (2009) Optimization of auto-introduction based fermentation media components for biomass production of Escherichia coli BL21-AI expressing recombinant bromelain. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE 2009), 12-13 December 2009, PWTC, Kuala Lumpur. (Unpublished)

Khorshidtalab, A. and Salami, Momoh Jimoh Emiyoka (2011) EEG signal classification for real-time brain-computer interface applications: a review. In: ICOM 2011, 17-19 May, 2011, Kuala Lumpur, Malaysia.

Kittur, Mohammad Yaseen and Kittur, Md Ibrahim and Reddy, Avala Raji and Baig, Maughal Ahmed Ali and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Mechanical response of aluminum 7075 with heat treatment and exfoliation corrosion. In: International Conference on Technology Innovation in Mechanical Engineering, TIME 2021, 22-23 April 2021, Virtual.

Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Mohamed Ariff, Tasnim Firdaus (2018) Tool wear mechanisms during cutting of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Konneh, Mohamed and Bagum, Mst. Nasima and Mohamed Ariff, Tasnim Firdaus and Yeakub Ali, Mohammad (2017) Machinability of soda lime glass in high speed end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Lazim, Nurul Hakimah and Samat, Noorasikin (2017) Effects of irradiated recycled polypropylene compatibilizer on the mechanical properties of microcrystalline cellulose reinforced recycled polypropylene composites. In: Advances in Material & Processing Technologies Conference 2016 (AMPT 2016), 8th-11th November 2016, Kuala Lumpur.

M.I, Ahmad Fitrie and Mohd Nasir, Nur Aimi and Anuar, Hazleen and Manshhor, Mohd Romainor and Kaiser, Mohammad Rejaul and Wan Busu, Wan Nazri (2012) Effect of maleic anhydride (MA) on thermal properties of polylactic acid (PLA) composites reinforced with durian skin fiber (DSF). In: 1st International Conference on Design and Innovation 2012, 7-8 Nov 2012, Sarawak.

Maleque, Md. Abdul (2017) Overview of Malaysian standards on alloy steels. In: Seminar on MS The Implementation of Malaysian Standards For Alloy Steels,, 1st Aug. 2017, Concorde Hotel Shah Alam. (Unpublished)

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2013) High performance aluminium composite brake rotor. In: International Conference And Exposition On Invention Of Institutions Of Higher Learning (PECIPTA 2013), 7th-9th Nov. 2013, Kuala Lumpur Convention Centre, Malaysia.

Maleque, Md. Abdul and Arifutzzaman, A. K. H. A. Ma and Rahman, Md. Mustafizur (2010) Knowledge based expert system application for automative piston material selection. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3 - 4 December 2010, Pekan, Pahang.

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina (2017) Eco-friendly automotive disc brake and cylinder liner (Eco SiC). In: IIUM World Prosumer Convention 2017, 7th-11th August 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina and Halim, Zahurin (2018) Eco-SiC reinforced aluminium matrix composite for motorbike brake disc application. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdullah, Muhammad Azwan and Jamal, Nur Ayuni Jamal (2018) A new approach for composite coating development on metallic materials. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Manshhor, Mohd Romainor and Anuar, Hazleen and Mohd Nasir, Nur Aimi and M.I, Ahmad Fitrie and Kaiser, Mohammad Rejaul and Wan Busu, Wan Nazri (2012) Processing and characterization of durian skin fibers composites: Mechanical properties. In: 1st International Conference on Design and Innovation 2012, 7-8 Nov 2012, Sarawak.

Mansor, Hafizah and Markantonakis, Konstantinos and Akram, Raja Naeem and Mayes, Keith (2015) Don't brick your car: Firmware confidentiality and rollback for vehicles. In: 10th International Conference on Availability, Reliability and Security (ARES 2015), 24th-27th August 2015, Toulouse, France.

Mat Surin, Ely Salwana and Mat Nayan, Norshita and Zulkifli, Zahidah and Abdul Kadir, Rabiah and Ahmad, Azlina (2018) Pembangunan aplikasi mudah alih berdasarkan cadangan model ramalan untuk mengenalpasti kemahiran wanita di era revolusi perindustrian ke-empat (Industri 4.0). In: Rampai Penyelidik Siri 6: STEM Untuk Komuniti, 17th July 2018, Bangi, Selangor.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Mohamad, Azhar (2018) Industry 4.0. In: 7th Annual Southeast Asian International Seminar 2018, 7-8 Nov 2018, Hotel Grand Savero, Jawa Barat. (Unpublished)

Mohamad, Noorihsan (2013) Inspiring creativity through innovative strategies: the case of Apple Inc. In: International Research, Invention and Innovation Exhibition 2013 (IRIIE2013), 19th - 20th Feb 2013, Cultural Activity Center (CAC), International Islamic University Malaysia. (Unpublished)

Mohamad, Souad A. and Othman, Raihan and Mushtaq, Umer (2013) Preparation of Zn0.6Cd0.4o nanorods and its characterization. In: Third International Conference on Biotechnology (ICBIoE 2013), 2nd - 4th July 2013 , Berjaya Times Square Hotel, Kuala Lumpur. (Unpublished)

Mohamed Amin, Mohamed Azril and Che Seman, Che Nor Zarida and Zakaria@Mohamad, Zamzuri and Awang, Mohd Shukrimi and Mohd Yusof, Nazri and Che Ahmad, Aminudin and Buyong, Zunariah and Fazan, Fazilah (2015) Pre-clinical in vivo evaluation of Malaysian-made östeopaste"- an injectable self-hardened synthetic bone cement in critical size bone defects. In: Malaysian Technology Expo (MTE 2015), 12-14 Feb 2015, Kuala Lumpur. (Unpublished)

Mohamed Razi, Mohamed Jalaldeen and Mohd Tamrin, Mohd Izzuddin and Mohd. Nor, Rizal (2020) Adopting e-hailing application among Malaysian millennials. In: "The 7th International Conference on Cyber and IT Service Management (CITSM 2019)", 4 - 6 Nov 2019, Jakarta, Indonesia.

Mohamed Razi, Mohamed Jalaldeen and Sarabdeen, Masahina and Mohd Tamrin, Mohd Izzuddin and Kijas, Abdul Cafoor Muhammadu (2019) Influencing factors of social commerce behavior in Saudi Arabia. In: 2019 International Conference on Computer and Information Sciences (ICCIS), 3rd-4th April 2019, Aljouf, Kingdom of Saudi Arabia.

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Shah Abdullah, Norazharuddin and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process. In: International Conference of X-Ray and Related Techniques 2016 (ICXRI 2016), 17th-18th August 2016, Dorsett Hotel, Putrajaya.

Mohd Ariffin, M K A and Sukindar, Nor Aiman and Baharudin, B.T. H T and Jaafar, C N A and Ismail, M I S (2018) Slicer method comparison using open-source 3D printer. In: 2017 International Conference on Power and Energy Engineering, 13th–15th September 2017, Ottawa, Canada.

Mohd Nasir, Nur Aimi and M.I, Ahmad Fitrie and Manshhor, Mohd Romainor and Kaiser, Muhammad Rejaul and Anuar, Hazleen and Wan Busu, Wan Nazri (2012) Effect of maleic anhydride on mechanical properties of Polylactic Acid (PLA) composites reinforced with Durian Skin Fiber (DSF). In: 1st International Conference on Design and Innovation 2012, 7-8 Nov 2012, Sarawak.

Mohd Noh, Nur Zety and Mohamed, Nur Aliana Hidayah and Noor, Erni (2021) The evaluation of bone regeneration following socket preservation with Concentrated Growth Factor (CGF)and Poly Lactic-Co-Glycolic Acid (PLGA) scaffold in rabbits. In: Research Day Malaysian Society of Periodontology, 26 September 2021, Kuala Lumpur, Malaysia. (Unpublished)

Mohd Noh, Nur Zety and Mohamed, Nur Aliana Hidayah and Noor, Erni (2019) The influence of Poly Lactic-co-Glycolic Acid (PLGA) scaffold with Concentrated Growth Factor (CGF) on human osteoblast cells: A pilot study. In: 13th Asian Pacific Society of Periodontology Meeting, 28th-29th September 2019, Kuala Lumpur. (Unpublished)

Mohd Nor, Rizal and Mohamadali, Noor Azizah and Azmi, Khairul and Marzuki, Ahmad and Mohd Nor, Leilanie and Yusof, Mohar (2016) ScanMed: a mobile medicine adherence application with intake validation using QR code. In: 2016 6th International Conference on Information and Communication Technology for The Muslim World (ICT4M 2016), 22nd-24th Nov. 2016, Jakarta, Indonesia.

Mohd Salleh, Mohd Hazimin (2015) Optical biosensor: approach, challenges and future. In: International Laser Technology and Optics Symposium (LATOS 15), 13th-14th October 2015, Skudai, Johor. (Unpublished)

Mohd. Yusof, Noraini and Jamal, Parveen and Mohd. Salleh, Hamzah (2010) Extraction of products from enzymatic hydrolysis of phytate in rice bran. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Musa, Hussin Abdullrhman and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2017) Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Musa, M. H. A. and Maleque, Md. Abdul and Hossain, M.S. and Ravishankar, S.R. and Al-Shiblib, A. and Coyle, E.D. (2020) Evaluation of sustainable micro-alloyed HSLA steel for pipeline application. In: International Gas Research Conference 2020 (IGRC 2020), 24-26 Feb 2020, Muscat, Oman. (Unpublished)

Nagoor Gunny, Ahmad Anas and Arbain, Dachyar and Jamal, Parveen (2017) Effect of structural changes of lignocelluloses material upon pre-treatment using green solvents. In: 5th International Conference on Advanced Material Engineering and Technology 2016, 8-9 Dec 2016, Kaohsiung City, Taiwan.

Olanrewaju, AbdulLateef and Yeow, Seong Tan and Tat, Lim Lee and Ayob, Mohd Fairullazi and Ang, Salem (2016) Investigating the compatibility of affordable housing with sustainability criteria: a conceptual framework. In: Putrajaya International Built Environment, Technology and Engineering Conference (PIBEC2016),, 24th–25th Sept. 2016, Putrajaya.

Othman, Muhd. Ezza Faiez and Amid, Azura and Jimat, Dzun Noraini and Jamaluddin, Mohd Jamil Aizat (2012) Optimization of cell discruption for recombinant bromelain using high pressure homogenizer (HPH) for commercial production COMMERCIAL PRODUCTION. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE 2009), 12-13 December 2012, Langkawi, Kedah, Malaysia. (Unpublished)

Paruka, Perowansa and Maleque, Md. Abdul and Md Shah, Md Kamal (2014) Performance of hybrid aluminium–composite columnar tube under axial crush force. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur. (Unpublished)

Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P. S. (2017) CFD analysis of effect of flow and geometry parameters on thrust force created by flow from nozzle. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 April 2017, Pune, Maharashtra, India.

Rahman, Md. Mozasser (2011) Cooperative robot and user friendly robot - new challenge in robotics. In: International Conference on Robotic Automation System (ICORAS 2011), 23 - 24 May 2011, TATIUC, Teluk Kalong, Terengganu, Malaysia . (Unpublished)

Rahman, Mohammed Ataur and Rashid, Muhammad Mahbubur and Mohiuddin, A. K. M. and Mokhtar, Hannan (2016) The prospects of panel style nano-battery technology for EV/HEV. In: 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2015), 6th-9th Dec. 2015, Singapore.

Rahman, S M A and Chait, Y and Hawlader, Mohammad Nurul Alam (2012) Drying kinetics of cocoa beans undergoing vacuum drying. In: International Congress on Food Engineering and Technology (IFET2012) , 28 - 30 March, 2012, Bangkok, Thailand.

Rifin, Zazarida and Muzahid, Muhamad Shafiq and Musa, Muhammad Zamuren (2010) i-WATCH. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Sahibin, Siti Safura Yasmin and Zeki, Akram M. (2011) Tropical crops advisory selection system. In: International Conference on Research and Innovation in Information Systems (ICRIIS 2011), 23-24 November 2011, Kuala Lumpur, Malaysia. (Unpublished)

Salahuddin, Ahmad Shakirin and Ayob, Mohd Fairullazi (2023) Comparative life cycle cost analysis of solar panel systems different brands in Malaysia. In: INTERNATIONAL COMPETITION ON SUSTAINABLE EDUCATION 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Samat, Noorasikin and Anuar, Hazleen and Hassan, Noor Azlina (2012) The effect of coupling agent treatment on the mechanical and flame retardancy properties of rigid PVC-ATH nanocomposites. In: The International Conference on Composite Interfaces, 6th-8th Aug. 2012, Kyoto Japan. (Unpublished)

Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. In: 2nd International Conference on Applied Sciences and Industrial Technology (ICASIT 2018), 14th-15yh November 2018, Melaka. (Unpublished)

Samat, Noorasikin and Sharifuddin, N and M.I, Shafiee (2019) Reprocessing of polypropylene/cellulose composites: effects on thermal properties. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2019), 30th-31st October 2019, Putrajaya. (Unpublished)

Samat, Noorasikin and Yahya, Mohd Samri and Mohd Lazim, Nurul Hakimah (2016) The compatibility effects of irradiated recycled PP on the mechanical and water properties of recycled PP/microcrystalline cellulose composites. In: International Conference on Advanced Science, Engineering and Technology (ICASET 2015), 21-22 December 2015, Penang.

Shaikh, Faraz Ahmed and Khan, Sheroz and Abdul Rahman, Farah Diyana and Yusoff, Siti Hajar and Alam, A. H. M. Zahirul and Badron, Khairayu and Shahid, Zeeshan (2018) Improved radiation characteristic of balanced antipodal vivaldi antenna in array configuration. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018, 20th-21st March 2018, Kuala Lumpur. (Unpublished)

Shamsul Harumain, Zakuan Azizi and Ahmad, Rezal Khairi (2018) R&D to commercialization – nanotechnology. In: SIRIM-WAITRO International Conference 2018, 21st-22nd November 2018, Park Royal Hotel, Penang. (Unpublished)

Sharmin, Shaila and Mansor, Hafizah (2021) Intrusion detection on the in-vehicle network using machine learning. In: 2021 3rd International Cyber Resilience Conference (CRC 2021), Virtual.

Sharmin, Shaila and Mansor, Hafizah and Abdul Kadir, Andi Fitriah and Abdul Aziz, Normaziah (2022) Using streaming data algorithm for intrusion detection on the vehicular controller area network. In: 1st International Conference on Ubiquitous Security, UbiSec 2021, 28-31 December 2021, Guangzhou.

Sukindar, Nor Aiman and Ab Tahir, Aliff (2018) Risk assessment on plan layout for project mechanical workshop in Politeknik Kuching Sarawak. In: 3rd National Research and Innovation Conference (NRICon2018), 19th September 2018, Kuching, Sarawak.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar (2015) Analyzing of fused deposition modeling nozzle for extruding biomaterials. In: Technology and Innovation National Conference ( TECHON ) 2015 : Managing Transformation In Technology and Innovation Globalization, 9-11 June 2015, Hilton Hotel Kuching, Sarawak.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar (2016) An analysis on finding the optimum die angle of polylactic acid in fused deposition modelling. In: 2nd International Conference on Advanced Engineering and Technology (ICAET 2015), 11th-13th December 2015, Incheon, South Korea.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Comparison on dimensional accuracy using a newly developed nozzle for open-source 3D printer. In: 6 th edition of the International Conference on Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering, Biomechatornics and Neurorehabilitation, 4th-6th November 2016, Bucharest, Romania.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Evaluation on the process parameters influencing the surface texture using open-source 3D printing. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28th-30th August 2016, Putrajaya.

Sulaiman, Mohd Hafis and R.N, Farahana and Mohd Jamir, Mohd Ridzuan and Mohammad Jaafar, Muhammad Hasnulhadi (2019) Manufacturing strategies and tribology of tailored tool surface topographies for enhanced lubrication in metal forming. In: 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP), 29 April 2019, Arau, Perlis.

Syed Azmi, Syarifah Farishaidayu and Ayob, Mohd Fairullazi (2023) Sustainable concrete: graphene enhanced concrete. In: International Competition on Sustainable Education 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Syed Ibrahim, Syed Umar and Mohd Nor Rashid, Noraswati and Mel, Maizirwan (2011) Carbon and Nitrogen Effect on Exopolysaccharides Production of Schizophyllum commune. In: International Congress of the Malaysian Society for Microbiology 2011, 8-11 Dec 2011, Penang.

Toha, Siti Fauziah and Abdul Rahim, Amir Fuhairah and Mansor, Hasmah and Akmeliawati, Rini (2015) PID tuned artificial immune system hover control for lab-scaled helicopter system. In: 2015 10th Asian Control Conference (ASCC 2015), 31st May- 3rd June 2015, Kota Kinabalu, Sabah.

Wan Mat, W. N. F. and Ahmad Zabidi, Suriza (2018) Implementation of green technology system in a classroom. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, International Islamic University Malaysia (IIUM), Gombak, Kuala Lumpur.

Wiyarno, Budi and Yunus, Rosli Mohd and Mel, Maizirwan (2010) Oil algae extraction from nannochloropsis SP: a study of soxhlet extraction and ultrasonic assisted extraction. In: International Conference on Process Engineering and Advanced Materials 2010 (ICPEAM2010) , June 15-17, 2010, Kuala Lumpur Convention Centre.

Monograph

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering. Research Report. UNSPECIFIED. (Unpublished)

Mahamod, Lukman Hakim (2020) Pelan pengurusan pembangunan persisir pantai Pekan Kuah-Kelibang, Langkawi, Kedah. Technical Report. PLANMalaysia, Kuala Lumpur. (Unpublished)

Mohamad, Souad A. and Jamal, Parveen (2012) A novel halal and healthy jam product from fruit wastes. Research Report. s.n, Kuala Lumpur. (Unpublished)

Mohd. Nor, Rizal and Mohd. Zain, Nor Razinah and Abdullah, Adam and Khurshid, Usman (2019) Commentaries on Public Consultation Paper (No. 1/2019): The Proposed Regulatory Framework for the Issuance of Digital Assets through Initial Coin Offerings (ICOs). Discussion Paper. UNSPECIFIED. (Unpublished)

Noor Azmi, Azran Azhim (2018) Study on biomechanical properties of decellularized tissue scaffolds for cardiovascular tissue engineering. Project Report. UNSPECIFIED. (Unpublished)

Topa, Ameen and Shah, Qasim Hussain (2015) A study of investigate and eliminate the crack-like flaws in bulk metal forming processes. Project Report. IIUM Press, Kuala Lumpur. (Unpublished)

Copyright

Ariffin, Adlina (2021) Industry Interview Questions: Halal Promotional Language. [Copyright] (Unpublished)

Ariffin, Adlina (2021) Kajian Tinjauan: Halal Promotional Language. [Copyright] (Unpublished)

Hashim, Yumi Zuhanis Has-Yun and Mohd Said, Norsabrina (2021) Mari mengenal logo halal: sebuah kaedah bercerita dengan gambar (Social Story) kesedaran halal. [Copyright] (Unpublished)