Items where Subject is "T Technology > T Technology (General) > T11.95 Industrial directories"

A

Abd Malek, Zetty Akhtar and Rahman, Md Mustafizur and Kadirgama, Kumaran and Rahman, Saidur and Maleque, Md. Abdul (2020) Thermal conductivity and viscosity of TiO2/MWCNTs (doped 10wt% graphene) - ethylene glycol based nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 32-46. ISSN 2289-7879

Abdullah, Aziera and Yusoff, Siti Hajar and Zaini, Syasya Azra and Midi, Nur Shahida and Mohamad, Sarah Yasmin (2019) Energy efficient smart street light for smart city using sensors and controller. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 558-568. ISSN 2089-3191 E-ISSN 2302-9285

Abdullah, Nur Azam (2021) UAV in defence: future outlook for Malaysia. In: Aerospace Research Interest Laboratory(ARIEL) Seminar Series, 10 Mar 2021, Online. (Unpublished)

Abdullah, Nur Azam and Azami, Muhammad Hanafi (2021) Potensi industri getah dalam pembangunan teknologi aeroangkasa. Berita Harian, 19 April 2021. p. 12.

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor iqram (2021) Computational modelling of bird strike impact on an aluminium alloy plate via coupling of FE-SPH. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 08-09 Mar 2021, Online.

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) Characterization of carbon nanotube reinforced aluminium nano-composite using field emission scanning electron microscope. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 73-77. E-ISSN 0128-1852

Adebisi, Adetayo A. and Maleque, Md. Abdul and Bello, Kamilu Adeyemi (2020) Interface study of SiCp/6061Al composite. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 456-461. ISBN 978-0-12-813196-1

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ndaliman, Mohammed Baba (2016) Influence of stirring speed on microstructure and wear morphology of SiCp-6061Al composite. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 21-26. E-ISSN 0128-1852

Afdzaluddin, Atiqah and Ismail, N and K, K. Lim and Jalar, A and Bakar, M.A. and Maleque, Md. Abdul and Ilyas, R.A. and Supian, A.B.M. (2022) Properties of recycled metal matrix composites. In: Recycling of plastics, metals, and their composites. CRC Press, Tailor and Francis Group, pp. 93-107. ISBN 978-0-367-70974-7

Ahmad Shah Hizam, Md Yasir and Sukindar, Nor Aiman and Ahmad Afif, Abdul Rahman Putra and Yang, Chuan Choong and Kamaruddin, Shafie and Aziz, Azlan and Aminanda, Yulfian and Sulaiman, Mohd Hafis (2024) Effect of heat treatment on mechanical properties and dimensional accuracy of 3D-Printed black carbon fiber HTPLA. Heliyon, 10 (11). ISSN 2405-8440

Alam, Md Shamsul and Rahman, Md. Mirazur and Samy, Md. Arif Abdulla and Afroj, Jinia and Prottasha, Soheli Noshin and Uddin, Md. Nasir and Ahammed, Samrat and Rashid, Muhammad Mahbubur (2020) Adjusting the LTE structural design to 5G: prospects and challenges. Test engineering and management, 83 (May-June). pp. 1405-1410. ISSN 0193-4120

Alam, Mohammad Shafiul and Elsheikh, Elfatih A. A. and Suliman, F. M. and Rashid, Muhammad Mahbubur and Faizabadi, Ahmed Rimaz (2024) Innovative strategies for early autism diagnosis: active learning and domain adaptation optimization. Diagnostics, 14 (6). pp. 2-18. ISSN 2075-4418

Alrashidi, Abdullah E. M. F. and Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali (2018) The scenario of supply chain management in Kuwait food industry. International Journal of Engineering Materials and Manufacture, 3 (3). pp. 162-170. ISSN 0128-1852

Anwar, Farhat and Boby, Rounaqul Islam and Rashid, Muhammad Mahbubur and Alam, Md. Monjurul and Shaikh, Z. (2017) Network-based real-time integrated Fire Detection and Alarm (FDA) system with building automation. In: 6th International Conference on Mechatronics (ICOM'17), 8th-9th August 2017, Kuala Lumpur.

B

Begum, Shahida and Karim, A.N. Mustafizul and Zamani, A. S. M. and Shafii, M. A. (2013) Wall thinning and creep damage analysis in boiler tube and optimization of operating conditions. Journal of Mechatronics, 1. pp. 1-6. ISSN 2326-2885

Bello, Kamilu Adeyemi and Dodo, Rayyan Mamuda and Babaswasun, Muhammad Sani and Umma, Abdullahi and Adebisi, Abdulmumin Adetayo and Maleque, Md. Abdul (2022) Effect of two-step austempering heat treatment on the dry sliding wear behavior of austempered ductile cast iron. In: 37th Annual Conference and Annual General Meetings, 26th - 29th October 2022, University of Abuja, Nigeria.

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Adebisi, Adetayo A. (2020) Processing of ceramic composite coating via TIG torch welding technique. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 523-535. ISBN 978-0-12-813196-1

Bensenouci, Djamel and Merabet, Boualem and Ozkendir, Osman M. and Maleque, Md. Abdul (2022) Nanostructured AlGaAsSb materials for thermophotovoltaic solar cells applications. Nanomaterials, 12 (19). pp. 1-14. ISSN 2079-4991

D

Debnath, Sujan and Oo, Zeya and Rahman, Muhammad Ekhlasur and Maleque, Md. Abdul and Tan, Chong Keng (2012) Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Engineering and Applied Sciences, 6. pp. 288-291. ISSN 1819-6608

F

Fuhaid, Mutlag S. and Murali, R.V. and Maleque, Md Abdul and Abd Rahman, Mohamed (2021) Reuse of marble wastes as reinforcement phase in LM6 aluminium matrix composites for automotive applications. International Journal of Powertrains, 10 (2). pp. 188-203. ISSN 1742-4267 E-ISSN 1742-4275

Fuhaid, Mutlag Sh. and Maleque, Md. Abdul and Murali, R V and Rahaman, M. A. Rahaman (2021) Natural and industrial origin reinforced LM6 aluminum composite materials – A comparative study. In: Recent Innovations in Science & Technology (RIST 2021), 19-20 June 2021, Virtual platform (India). (Unpublished)

Fuhaid, Mutlag Shafi and Murali, R V and Maleque, Md. Abdul and Krishnan, P K and Abd. Rahman, Mohamed (2021) Synthesis and characterisation of aluminium composite with graphene oxide reinforcement. IOP Conference Series: Materials Science and Engineering, 1057. pp. 1-12.

H

H, Lailatul and Maleque, Md. Abdul (2017) Hardfacing of duplex stainless steel using melting and diffusion processes. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Haji Hassan, Masjuki and M., Gulzar and M. A., Kalam and N. W. M., Zulkifli and Maleque, Md. Abdul and M. S. S., Malik and A., Arslan (2023) Engine tribology: enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings: Technologies and Applications. CRC Press, Boca Raton, pp. 221-254.

Hossain, Mohammad Sayeed and Maleque, Md. Abdul (2020) Residual stress analysis for sustainable structural integrity assessment of an engineering component. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 548-556. ISBN 978-0-12-813196-1

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, M. M. and Bello, K. A. (2021) Sustainable energy simulation for water heating system. In: 2021 Sustainable Engineering and Industrial Technology Conference, Nigeria. (In Press)

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, Md. Mustafizur (2021) Comparative study on performance of flat plate and evacuated tube collectors solar water heater system. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,, 22 – 23rd June, KOE, IIUM (virtual). (Unpublished)

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, Md. Mustafizur (2022) Flat plate and evacuated tube collectors solar water heater system – a comparative study. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,, 21 – 23 June 2021, Kuala Lumpur, Malaysia.

Huzaifah, M. R.M. and Mohd Sapuan, Salit and Leman, Z. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul (2017) A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites. Multidiscipline Modeling in Materials and Structures, 13 (4). pp. 678-698. ISSN 1573-6105 E-ISSN 1573-6113

M

Mahmood, M. H. and Maleque, Md. Abdul and -, Suryanto (2020) Effect of Nano-CuO grain size on heat transfer performance of copper substrate. Test Engineering and Management, 83 (May-June). pp. 1180-1185. E-ISSN 0193-4120

Mahmood, M. H. and Maleque, Md. Abdul and Rahman, M.M. Hafizur (2022) Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5). pp. 6013-6023. ISSN 2193-567X E-ISSN 2191-4281

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2020) Effective parameter of nano-CuO coating on CO gas-sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering (AJSE), xx (xx). pp. 1-5. ISSN 2193-567X E-ISSN 2191-4281 (In Press)

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2021) Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering, 46. pp. 6557-6566. ISSN 2193-567X E-ISSN 2191-4281

Maleque, Md. Abdul (2016) Alloy steel bars for special application bolting materials. Other. UNSPECIFIED.

Maleque, Md. Abdul (2014) Contemporary light weight composite material -milestone towards automotive brake rotor application. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul (2017) Hot rolled alloy steel wire rod for pre-stressed steel - Specification. Other. DSM, KL.

Maleque, Md. Abdul (2017) Overview of Malaysian standards on alloy steels. In: Seminar on MS The Implementation of Malaysian Standards For Alloy Steels,, 1st Aug. 2017, Concorde Hotel Shah Alam. (Unpublished)

Maleque, Md. Abdul (2017) Particulate composite surface by TIG torch surfacing. In: Advanced Materials Characterization Technique (AMCT 2017), 16th-17th August 2017, Genting Highlands, Pahang. (Unpublished)

Maleque, Md. Abdul (2014) Performance assessment of aluminium composite material for automotive brake rotor. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 207-217. ISSN 1745-6444 (O), 1745-6436 (P)

Maleque, Md. Abdul (2021) Spin-orbit coupling effect on the electronic structure of Sr2FeHfO6 alloy for spintronics device application. Journal of Magnetism and Magnetic Materials, 518. pp. 1-7. ISSN 0304-8853

Maleque, Md. Abdul (2020) Stainless steels for general purposes - Part 1: Corrosion-resistant flat products (ISO 16143-1:2014, MOD) (First revision). Policy Paper. Department of Standards Malaysia, Cyberjaya, Selangor.

Maleque, Md. Abdul (2017) TIG torch surfacing of nano-particulate hybrid composite layer: development and characterization. In: 1st International Workshop on Multifunctional Materials (IW2M-2017), 10th-12th October 2017, Mostaganem, Algeria. (Unpublished)

Maleque, Md. Abdul (2018) TIG torch technique for hard face surfacing. In: TNBR Remaco presentation, 19 April 2018, Selangor. (Unpublished)

Maleque, Md. Abdul (2022) Wear and corrosion behavior of metallic coated surface under exposure to biodiesel�. In: ICAMME2022, Virtual. (Unpublished)

Maleque, Md. Abdul (2018) Wear properties of SiC particulate preplaced TIG melted surface layered duplex stainless steel. In: World Summit on Advances in Science, Engineering and Technology (Cambridge Summit 2018), 4th-6th Jan. 2018, Cambridge, United Kingdom. (Unpublished)

Maleque, Md. Abdul and ., M. Radhi and Rahman, Md. Mustafizur (2016) Wear study of Mg-SiCp reinforcement aluminium metal matrix composite. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1758-1764. ISSN 2289-4659 E-ISSN 2231-8380

Maleque, Md. Abdul and ., W. Saffin and Ahmed, A. S (2016) Formation of Fe-C-Si ternary composite coating on CP-titanium and its tribological interaction with Jatropha oil. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and A.R., Nur Farina and Paijan, Lailatul Harina and Abdullah, M. Azwan (2018) Lighter weight and energy efficient eco-siC composite for motorbike brake disc application. In: 29th INTERNATIONAL INVENTION, INNOVATION AND TECHNOLOGY EXHIBITION (ITEX) 2018, 10-12 May 2018, KLCC. (Unpublished)

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Mohammad Ismail, Mohammad Abul Fazal and Iqbal, M. M. and Paruka, Perowansa (2015) Effect of electron beam radiation on water absorption of hybrid kenaf-glass unsaturated polyester composite. Advanced Materials Research, 1115. pp. 266-269. ISSN 1022-6680

Maleque, Md. Abdul and Afiq, Muhammad (2018) Melting of SiC powders preplaced duplex stainless steel using TIG welding. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Azwan, M. K. and Muhammad M., Muhammad M. (2020) Sliding wear of SiC reinforced duplex stainless steel via TIG torch sur-face melting technique. Recent Patents on Engineering, 14 (3). pp. 366-372. ISSN 1872-2121 E-ISSN 2212-4047

Maleque, Md. Abdul and Azwan, Muhammad and Afiq, Muhammad M. (2020) Sliding wear of SiC reinforced duplex stainless steel via TIG torch surface melting technique. Recent Patents on Engineering, 14 (3). pp. 366-372. ISSN 1872-2121 E-ISSN 2212-4047

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Salim, Nur Akma (2016) Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Halim, Zahurin and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and A.R., Nur Farina and Parveez, Bisma (2019) Sustainable lightweight composite materials. In: Tech Plan Demo Day in Malaysia 2019, 20 July 2019, SME Corporation, KL Sentral, KL. (Unpublished)

Maleque, Md. Abdul and Hassan, Masjuki and K.O., Low and Ali, Mohammad Yeakub (2021) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November, Universiti Teknologi Brunei ( Virtual ). (Unpublished)

Maleque, Md. Abdul and K.A., Bello and Ahmad, Zuraida (2014) Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application. In: Malaysia Technology Expo 2014, 20-22 Feb 2014, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Masjuki, H. H. and Low, K. O. and Ali, Mohammad Yeakub (2023) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei (Virtual).

Maleque, Md. Abdul and Masjuki, H.H. (2002) Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant. Industrial Lubrication and Tribology, 54 (4). pp. 177-182. ISSN 0036-8792

Maleque, Md. Abdul and Mat Jusoh, Ahmad Haziq and Salehudin, Nabilah Farhana and Yee, Sen Tat and Din, Mohd Idrus and Adenan, Rashimah and Abdullah, Mohamad Akhir and Mat Zain, Mohd Hafizy and Lim, Sooi San and Chum, Pak Kuan and Ahmad Salman, Shafiq Wazzan and Yazid, Zurawati and Mat Isa, Mohd Azlan and Mohd Saleh, Mohd Khairul Annuar and Chua, Seok Cheng and Idris, Mohd Nazri and Karam Singh, Salvinder Singh and Lee, Hooi Lan and Tan, Chin Guan and Pang, See How (2023) Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD). Policy Paper. Department of Standard Malaysia (DSM), Malaysia.

Maleque, Md. Abdul and Md Idriss, Ahmed Nazrin and Naping, Rosmia and Rahman, Md Mustafizur and Efeoglu, Ihsan (2024) The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG Arc process. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 33-42. ISSN 2289 – 7895

Maleque, Md. Abdul and Paijan, Lailatul Harina (2017) Modified surface of duplex stainless steel using TIG torch melting and diffusion techniques. In: Malaysia Technology Expo (MTE 2017), 16th-18th Feb. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina (2017) Modified surface of duplex stainless steel using tig torch and diffusion techniques. In: Malaysia Technology Expo (MTE 2017), 16th-18th February 2017, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina (2017) Eco-friendly automotive disc brake and cylinder liner (Eco SiC). In: IIUM World Prosumer Convention 2017, 7th-11th August 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina and Halim, Zahurin (2018) Eco-SiC reinforced aluminium matrix composite for motorbike brake disc application. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdullah, Muhammad Azwan and Jamal, Nur Ayuni Jamal (2018) A new approach for composite coating development on metallic materials. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Bello, Kamillo and ,, Mohd Azwan and Rahman, Md Mustafizur (2018) Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach. Jurnal Tribologi, 17. pp. 15-28. E-ISSN 2289-7232

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2018) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation. ISSN 1757-2754 E-ISSN 1757-2762 (In Press)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2019) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754 E-ISSN 1757-2762

Maleque, Md. Abdul and Sabur, Abdus and Moudood, Abdul and Ali, Mohammad Yeakub (2014) Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials, 465. pp. 1329-1333. ISSN 1660-9336

Maleque, Md. Abdul and Sarifuddin, Norshahida and Haji Hassan, Masjuki and Rahman, M. M. (2022) Recent advances in hybrid coating on metallic materials using liquid additive manufacturing. In: International Conference on Mechanical Engineering (ICME 2022), 16-19 February 2022, Lahore, Pakistan.

Maleque, Md. Abdul and Shaha, Sugrib Kumar and Razali, Nurul Nadirah (2018) Wear behavior of aluminium modified cast iron in comparison with conventional gray cast iron. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-7. ISBN 978-0-12-803581-8 (In Press)

Maleque, Md. Abdul and Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and D., Ramasamy (2021) An overview on synthesis, stability, opportunities and challenges of nanofluids. Materials Today: Proceedings, 41. pp. 30-37. E-ISSN 2214-7853

Masjuki, H. H. and Maleque, Md. Abdul and Kubo, Aizoh and Nonaka, Tetsuya (1999) Palm oil and mineral oil based lubricants - their tribological and emission performance. Tribology International, 32 (6). pp. 305-314. ISSN 0301-679X

Masjuki, H.H. and Gulzar, M. and Kalam, M. A. and M. Zulkifli, N. W. and Maleque, Md. Abdul (2023) Engine tribology enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings - Technologies and Applications. CRC Press, Tailor & Francies Group LLC, pp. 221-254. ISBN 9781032038575

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2021) The effect of working distances on the formation of TiC composite surface hardening using TIG melting technique. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2022) Synthetization of TiC surface hardening using TIG melting technique - the effect of working distance. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21-23 June 2021, Kuala Lumpur, Malaysia.

Md Idriss, Ahmed Nazrin and UNSPECIFIED and Maleque, Md. Abdul (2022) Demographic changes by the vickers microhardness surface indentations on the TiC metal matrix composite TIG melted track. In: 3rd Malaysian International Tribology Conference, 28-30 September 2020, Virtual.

Md Idriss, Ahmed Nazrin and Kasolang, Salmiah and Md. Abdul, Maleque and Md Nasir, Ramdziah (2021) An overview on the importance of surface modification by TIG and lasers incorporating carbides and their relations to wear behaviours. Jurnal Tribologi, 29. pp. 96-116. ISSN 2289-7232

Md Idriss, Ahmed Nazrin and Maleque, Md. Abdul and Kamdi, Zakiah and Muhammad, Noorhafiza and Azhari, Azmir (2024) The preheating effect of mild steel layers deposited using SMAW at 100 A and 70 A. Journal of Advanced Research in Applied Mechanics, 119 (1). pp. 112-120. E-ISSN 2289-7895

Memon, Mujtaba S and Haeng, Muk Cho and Masjuki, Haji Hassan and M.A, Kalam and Miiro, Farooq and M. Soudagar, Manzoore Elahi and Muhammad, Gul and Ahmed, Waqar and Afzal, Asif and Bashir, Shahid and V., Dhana Raju and Yaqoob, Haseeb and A.Z, Syahir (2021) Effect of alcoholic and nano-particles additives on tribological properties of diesel–palm–sesame–biodiesel blends. Energy Reports, 7. pp. 1162-1171. ISSN 2352-4847

Muhammad, Aisha and Ali, Mohammed A. H. and Turaev, Sherzod and Shanono, Ibrahim Haruna and Hujainah, Fadhl and Mohd Zubir, Mohd Nashrul and Faiz, Muhammad Khairi and Mohd Faizal, Erma Rahayu and Abdulghafor, Rawad Abdulkhaleq Abdulmolla (2021) Novel algorithm for mobile robot path planning in constrained environment. CMC-Computers, Materials & Continua, 71 (2). pp. 2697-2719. ISSN 15462218 E-ISSN 1546-2226

Musa, M. H. A. and Maleque, Md. Abdul and Hossain, M.S. and Ravishankar, S.R. and Al-Shiblib, A. and Coyle, E.D. (2020) Evaluation of sustainable micro-alloyed HSLA steel for pipeline application. In: International Gas Research Conference 2020 (IGRC 2020), 24-26 Feb 2020, Muscat, Oman. (Unpublished)

Musa, Mukhtaruddin Iqbal A. and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

N

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hj Hassan, Masjuki and Bello, Kamilu Adeyemi (2024) Contemporary progress in the hybrid coating of titanium alloys using the liquid additive manufacturing technique. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 108-117. ISSN 2289-7895

Nur Huda, Arif and Pebrianti, Dwi and Md Zain, Zainah (2023) Integrated robotic arm control: inverse kinematics, trajectory planning, and performance evaluation for automated welding. Asian Journal Science and Engineering, 2 (2). pp. 82-100. ISSN 2963-6752

P

P.H., Lailatul and Maleque, Md. Abdul (2016) Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016), 8th-11th Nov 2016, Kuala Lumpur. (Unpublished)

Paijan, Lailatul Harina and Maleque, Md Abdul and -, Suryanto (2020) Effect of SiC particle size on hardness and wear behavior of TIG melted hard surface layer AISI Duplex-2205 steel. TEST Engineering & Management, 83 (May-June). pp. 1392-1397. ISSN 0193-4120

Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Effect of energy input on wear behaviour of SiC surface modified layer duplex stainless steel. In: 5th Malaysia-Japan Tribology Symposium (MJTS2017), 28th-30th Aug. 2017, Kuala Lumpur.

Paijan, Lailatul Harina and Maleque, Md. Abdul (2023) Morphological and wear behavior of low temperature thermochemical gaseous nitriding process. Jurnal Tribologi, 36. pp. 57-69. E-ISSN 2289-7232

Paijan, Lailatul Harina and Maleque, Md. Abdul (2018) Tribological properties of surface coated duplex stainless steel containing SiC ceramic particles. Jurnal Tribologi, 18. pp. 136-148. E-ISSN 2289-7232

Paijan, Lailatul Harina and Maleque, Md. Abdul (2019) A new approach for composite coating development on duplex stainless steel (DSS). In: Kulliyyah Of Engineering Research, Innovation And Commercialisation Exhibition (KERICE) 2019, 18 September 2019, Gombak, Kuala Lumpur. (Unpublished)

Paijan, Lailatul Harina and Maleque, Md. Abdul and Abu Bakar, Mohd Hadzley and Mamat, Mohd Fauzi and Osman, Mohd Hairizal and Rosli, Nor Ana and Asari, Mohd Rashidi (2023) Influence of microstructure on the hardness behavior of AISI duplex-2205 composite layer by TIG cladding. Malaysian Journal of Microscopy, 19 (1). pp. 118-128. ISSN 1823-7010 E-ISSN 2600-7444

Paijan, Lailatul Harina and Maleque, Md. Abdul and Adeyemi, Bello Kamilu and Mamat, Mohd Fauzi and Hussein, Nur Izan Syahriah (2023) Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. Jurnal Tribologi, 37. pp. 15-28. E-ISSN 2289-7232

Paruk, Perowansa Paruk and Siswanto, Waluyo Adi and Maleque, Md. Abdul and Mohd Shah, Mohd Kamal (2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force. Journal of Mechanical Science and Technology, 29 (5). pp. 1941-1953. ISSN 1976-3824 (O), 1738-494X (P)

Paruka, Perowansa and Mat Yasin, Md Hafizil and Mamat, Rizalman and Maleque, Md. Abdul and Md Shah, Md Kamal (2015) Performance properties of hybrid aluminium–composite columnar tube under axial crush force. Advanced Materials Research, 1115. pp. 288-291. ISSN 1022-6680

Parveez, Bisma and Maleque, Md. Abdul and Jamal, Nur Ayuni Jamal (2021) Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. Journal of Materials Science, 56. pp. 16195-16222. ISSN 0022-2461 E-ISSN 1573-4803

R

Ramli, Mohd Hasli and Rosman, Arieff Salleh and Khan, Aqeel and Ahmad Fadzillah, Nurrulhidayah and Hassan, Ahmad Muhyuddin and Samat @ Darawi, Abdul Basit and Saari, Zilal and Jandra, Mifedwil and Omar Jamil, Nor Azwa (2020) Halal assurance management system in chicken broiler industry. Journal of Critical Review, 7 (7). pp. 1046-1051. E-ISSN 2394-5125

Rashid, Muhammad Mahbubur and Musa, A. and Rahman, Mohammed Ataur and Farahana, Ainul F. (2011) Design and development of automatic parking system and electronic parking fee collection based on number plate recognition. In: 4th International Conference on Advanced Computer Theory and Engineering (ICACTE 2011), 28-30 December 2011, Dubai, UAE. (Unpublished)

Rashid, Muhammad Mahbubur and Shafie, Amir Akramin and Alamgir, Tarik Bin (2011) Design and implementation of fuzzy based person following mobile robot. In: International Conference on Mechatronics and Materials Engineering (ICMME 2011), 10-12 December 2011, Qiqihar. (Unpublished)

Rashidan, Mohammad Ariff and Sidek, Shahrul Na'im and Md Yusof, Hazlina and Abd. Hamid, Siti Rafiah and Dzulkarnain, Ahmad Aidil Arafat and Ghazali, Aimi Shazwani and Mohamad Salah, Muhammad Faisal El-Muhammady and Abdul Alim Sidique, Faizanah (2023) Stimuli video quantification based on Valence-Arousal Elicitation in children with Autism Spectrum Disorder (ASD). IEEE access, 11. pp. 111142-111153. E-ISSN 2169-3536

S

Sahari, J. and Maleque, Md. Abdul (2016) Mechanical properties of oil palm shell composites. International Journal of Polymer Science, 2016. pp. 1-7. ISSN 1687-9422 E-ISSN 1687-9430

Sahari, J. and Maleque, Md. Abdul and Sapuan, S. M. (2019) Sugar palm starch biopolymer: extraction and processing. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 41-55. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Jumaidin, R. (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 57-70. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Suriani, M.J. and YUsriah, L. (2019) Review of development and characterization of sugar palm fiber–reinforced polymer composites. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 15-40. ISBN 978-1-4987-5302-9

Sahari, J. and Sapuan, S.M. and Zainudin, E.S. and Maleque, Md. Abdul (2014) Physico-chemical and thermal properties of starch derived from sugar palm tree (arenga pinnata). Asian Journal of Chemistry, 26 (4). pp. 955-959. ISSN 0970-7077 (P) 0975-427X (O)

Sahari, J. and Sapuan, S. M. and Zainudin, E. S. and Maleque, Md. Abdul (2014) Degradation characteristics of SPF/SPS biocomposites. Fibres & Textiles in Eastern Europe, 22 (5(107)). pp. 94-96. ISSN 1995-2014

Sahari, J. and Maleque, Md. Abdul (2015) Modelling of mechanical properties of eco-friendly composites derived from sugar palm tree. Advances in Environmental Biology, 9 (19). pp. 176-181. ISSN 1995-0756

Sahari, Japar and Sapuan, S.M. and Zainudin, E.S. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul and Zuhri, Mohd Y M and Akhtar, Riaz (2017) Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis, 14 (2 (Thematic Issue)). pp. 227-232. ISSN 1570-1794 E-ISSN 1875-6271

Sahid, N.S.M. and Rahman, Md. Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2017) Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. International Journal of Automotive and Mechanical Engineering, 14 (1). pp. 3913-3926. ISSN 2229-8649 E-ISSN 2180-1606

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ismail, Ahmad Faris (2021) Numerical Modelling of Bird Strike on a Rotating Engine Blade Based on Variations of Porosity Density. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Abd Halim, Nor Farah Huda and Kamaruddin, Shafie and Sulaiman, Mohd Hafis (2020) The effects of printing parameters on the surface quality of metal composite by using fused deposition modeling. Solid State Technology, 63 (5). pp. 866-874. E-ISSN 0038-111X

U

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Safiei, Wahaizad and Kadirgama, Kumaran and Maleque, Md. Abdul (2022) Effects of minimum quantity lubrication technique in different machining processes-a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 135-159. ISSN 2289-7879

Urmi, Wajiha Tasnim and Rahman, Md. Mustafizur and Wan Hamzah, Wan Azmi and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2020) Experimental investigation on the stability of 40% ethylene glycol based TiO2-Al2O3 hybrid nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879

W

W. Aris, Wan Muhammad Syaamil and Abdul Rahim, Nadirah (2023) Operational cost analysis of an Earth Station System using parallel configuration. In: Proceedings of the 9th International Conference on Computer and Communication Engineering, ICCCE 2023, Kuala Lumpur, Malaysia.

Y

Yusof, N.S.B. and Sapuan, S.M. and Sultan, M.T.H. and Jawaid, M. and Maleque, Md. Abdul (2017) Design and materials development of automotive crash box: a review. Ciência & Tecnologia dos Materiais, 29 (3 (September -December)). pp. 129-144. ISSN 0870-8312

Z

Zainuddin, Ahmad Anwar and Ahmad Muhammad, Nurul Fadhilah and Mohd Hasli, Amir Husaini and Ahmad Zaini, Nor Ani Jannah and Karimudin, Nureen Batrisyia Balqis and Saiful Bahri, Hannah Sabrina and Khairul Nizam, Muhamad Khaleesh Mirza and Kamarudin, Saidatul Izyanie and Ghazalli, Nasyitah (2023) Empowering smart city governance through decentralized blockchain solutions for security and privacy in IoT communications. Bulletin of Social Informatics Theory and Application, 7 (2). pp. 104-117. ISSN 2614-0047