IIUM Repository (IREP)

Prof. Ir. Dr. Mohammad Yeakub Ali

Department of Manufacturing and Materials Engineering

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2017) Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2). pp. 90-94. ISSN 2405-4623
  2. Ali, Mohammad Yeakub (2018) Dry electrical discharge machining: an environmental friendly machining process. In: 2018 9th International Conference on Manufacturing Science and Technology (ICMST 2018), 11th-13th August 2018, Kuala Lumpur. (Unpublished)
  3. Ali, Mohammad Yeakub (2017) Micro electro discharge machining for nonconductive ceramic materials. In: 2nd World Symposium on Mechanical and Control Engineering (WSMCE 2017), 2nd-3rd Dec. 2017, Guilin, China. (Unpublished)
  4. Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.
  5. Ali, Mohammad Yeakub and Moudood, M. A. and Maleque, Md. Abdul and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3015-3026. ISSN 2289-4659
  6. Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.
  7. Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2018) Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology, 7 (3). pp. 32-39.
  8. Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)
  9. Ali, Mohammad Yeakub and Banu, Asfana and Shaffiq, Muhammad and Abd. Rahman, Mohamed and Konneh, Mohamed and Salehan, Muhammad (2018) Investigation of taper angle in dry micro wire EDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. (In Press)
  10. Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, Asfana and Sabur, Abdus and Debnath, Sujan (2018) Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017), 23rd-25th July 2017, Hong Kong, China.
  11. Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659
  12. Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul (2018) Surface morphology study in high speed milling of soda lime glass. In: 3rd International Conference on the Science and Engineering of Materials (ICoSEM 2017), 24th-25th Oct. 2017, Kuala Lumpur.
  13. Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62.
  14. Ali, Mohammad Yeakub and Banu, Asfana and Bakar, Mazilah Abu (2018) Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur.
  15. Hanash, Ebrahim and Ali, Mohammad Yeakub (2018) Experimental study of electrical discharge drilling of stainless steel UNS S30400. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
  16. Bagum, Mst. Nasima and Konneh, Mohamed and Ali, Mohammad Yeakub (2018) Establishing relationship between process parameters and temperature during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
  17. Nabinejad, Omid and Debnath, Sujan and Beh, Jack Kai and Ali, Mohammad Yeakub (2018) Mechanical performance and moisture absorption of unidirectional bamboo fiber polyester composite. In: 8th International Conference on Manufacturing Science and Technology, ICMST 2017, 23-25 June 2017, Hong Kong.
  18. Bagum, Mst. Nasima and Konneh, Mohamed and Abdullah, Kasim Abdulrahman. . and Ali, Mohammad Yeakub (2018) Chip morphology as a performance predictor during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.
  19. Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.
  20. Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2015) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 4th International Conference on Advanced Computer Science Applications and Technologies, 8-10 December 2015, Kuala Lumpur, Malaysia.

Most Viewed Items

Item titleViews
1Application of silicon carbide in abrasive water jet machining1465
2Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear1397
3Minimum chip thickness in machining MEMS structure using Tool Based Micromilling1330
4Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness1284
5Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel1275
6Fabrication of Micropillar Sheet for Cell Culture Dish1254
7Powder mixed micro electro discharge milling of titanium alloy: analysis of surface roughness1238
8Investigation of microholes produced by focused ion beam micromachining1222
9Fabrication of Bio-MEMS Nanostructure by focused ion beam1203
10Empirical modelling of vibration in micro end milling of PMMA1194
11Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic 1191
12Micro-manufacturing technology: the huge opportunity of thinking small1156
13Investigation of burr in high speed microdrilling 1103
14A review of focused ion beam sputtering1053
15Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining1036
16Fabrication of silicon nanopillar sheet for Cell Culture Dish1033
17Tool vibration due to high speed micro end milling parameters1003
18Silicon carbide powder mixed micro electro discharge milling of titanium alloy998
19Nanopillar Array for Cell Culture Dish992
20Micro Electro Discharge Milling for Microfabrication982
21Investigation of Microholes Produced by Focused Ion Beam Micromachining965
22Mechanical performance and water absorption resistance of HIPS/MWCNTs nanocomposite941
23Investigation of vibration and surface roughness in micro milling of PMMA934
24Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish928
25Focused Ion Beam Nanomachining of Cell Culture Sheet (softcopy not yet available)899
26Influence of energy parameters of micro WEDM on kerf892
27Application of focused ion beam micromachining: a review850
28Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles842
29Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate814
30Trimming of atomic force microscope probe tip by ion milling 798