IIUM Repository

Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

[img] PDF (EFFECT OF PROCESS PARAMETERS ON ABRASIVE CONTAMINATION DURING WATER ABRASIVE JET MACHINING OF MILD STEEL) - Published Version
Restricted to Repository staff only

Download (345kB) | Request a copy

Abstract

In the area of grit blasting, it is well known that microscopically small abrasive debris gets trapped on the surface, and due to impact the grits might cause the surface to fracture and a fraction of it to be embedded. The same problem appears in abrasive water jet (AWJ) machining especially in the so-called deformation wear zone or striation zone. The major aim in this study is to investigate the abrasive contamination on mild steel cutting surface. In the present study mild steel was used as the work material, since it is widely used in many industries. In order to analyze the pattern of the contaminations on the cut surface, the selected process parameters were abrasive flow rate, pressure and work feed rate. Abrasive contamination was measured at different depths along the path of the abrasives. The three selected zones for measuring abrasive contamination at different depths were the primary impact zone, the smoother zone and the deformation wear zone. It was found that contamination at the middle zone, i.e., the smoother zone had the least abrasive contamination while the initial impact zone and the deformation wear zone showed high abrasive contamination. It was also found that a higher pressure reduces abrasive contamination while a higher abrasive flow rate and work feed rate increase abrasive contamination.

Item Type: Conference or Workshop Item (UNSPECIFIED)
Additional Information: /2521
Uncontrolled Keywords: Abrasive water jet machining, Contamination, Abrasive flow rate, Abrasive pressure, Feed rate
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TS Manufactures
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User: Prof. Ir. Dr. Mohammad Yeakub Ali
Date Deposited: 15 Sep 2011 11:43
Last Modified: 18 Jan 2012 08:28
URI: http://irep.iium.edu.my/id/eprint/2521

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year