IIUM Repository

Items where Author is "Khan, Sher Afghan "

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 346.

Article

Elumalai, R. and Sumathy, S. and K, Ravi and Akhtar, Mohammad Nishat and Elumalai, P.V. and Khan, Sher Afghan and Gupta, M. Satayanarayana and Asif, Mohammad (2024) Experimental investigation and gray relational optimization of engine parameters to improve the output characteristics of an ammonia biodiesel-powered dual-fuel combustion engine. Case Studies in Thermal Engineering, 56. pp. 1-20. ISSN 2214-157X

Roy, Roji George and Agbulut, Ümit and Koshy, Chacko Preno and Alex, Y. and Sailesh, K.S. and Khan, Sher Afghan and Jilte, Ravindra and Linul, Emanoil and Asif, Mohammad (2024) Impact of synthesizing surfactant-modified catalytic ceria nanoparticles on the performance and environmental behaviors of coconut oil/diesel-fueled CI engine: an optimization attempt. Energy, 295. pp. 1-21. ISSN 0360-5442 E-ISSN 1873-6785

Ridwan, Ridwan and Khan, Sher Afghan and Mohamed Ali, Jaffar Syed and Mohammed Sapardi, Mohd Azan (2024) Influence of cavity on base pressure manipulation in suddenly expanded flow from converging diverging nozzle for area ratio 5.29. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 32-49. E-ISSN 2289-7879

Warimani, Mahammadsalman and Mahaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Bellary, Sayed Ahmed Imran (2024) Numerical investigation of NOx reduction in a hydrogen-fueled pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 106-117. E-ISSN 2289-7879

Quadros, Jaimon Dennis and Mogul, Yakub Iqbal and Ağbulut, Ümit and Gürel, Ali Etem and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Jilte, Ravindra D. and Asif, Mohammad (2024) Analysis of bubble departure and lift-off boiling model using computational intelligence techniques and hybrid algorithms. International Journal of Thermal Sciences, 197. pp. 1-12. ISSN 1290-0729 E-ISSN 1778-4166

Jain, Yogesh Kumar and Kurkute, Vijay and Deshmukh, Sagar Mane and Pathan, Khizar Ahmed and Attar, Ajaj Rashid and Khan, Sher Afghan (2024) The influence of plate fin heat sink orientation under natural convection on thermal performance: an experimental and numerical study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 118-129. ISSN 2289-7879

Venkatesan, Elumalai Perumal and Krishnaiah, Ravi and Prasad, Kalapala and Medapati, Sreenivasa Reddy and Sree, Sripada Rama and Asif, Mohammad and Khan, Sher Afghan and Linul, Emanoil (2024) Compatibility effects of waste cooking oil biodiesel blend on fuel system elastomers in compression ignition engines. ACS Omega, 9 (6). pp. 6709-6718. ISSN 2470-1343 (In Press)

Pathan, Khizar Ahmed and Chaudhary, Zakir Ilahi and Attar, Ajaj Rashid and Khan, Sher Afghan and Khan, Ambareen (2023) Optimization of Nozzle Design for Weight Reduction using Variable Wall Thickness. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2). pp. 86-101. ISSN 2289-7879

Karthick, C. and Chatterjee, Dipankar and Gupta, Nidhish and Saxena, Prakhar and Sivagami, K. and Jeevanantham, A. K. and Kasianantham, Nanthagopal and Shaik, Saboor and Asif, Mohammad and Khan, Sher Afghan and Ağbulut, Ümit (2023) Environmental, combustion, and performance investigation of low viscous biofuel in port fuel injection spark‑ignition engine. Journal of Thermal Analysis and Calorimetry. pp. 1-22. ISSN 1588-2926 E-ISSN 1388-6150

Ramachandran, Elumalai and Krishnaiah, Ravi and Perumal Venkatesan, Elumalai and Medapati, Sreenivasa Reddy and Sabarish, Rajagopalan and Khan, Sher Afghan and Asif, Mohammad and Linul, Emanoil (2023) Experimental studies to reduce usage of fossil fuels and improve green fuels by adopting hydrogen−ammonia−biodiesel as trinary fuel for RCCI engine. ACS omega. A-J. E-ISSN 2470-1343

Jilte, Ravindra and Afzal, Asif and Ağbulut, Ümit and Shaik, Saboor and Khan, Sher Afghan and Linul, Emanoil and Asif, Mohammad (2023) Battery thermal management of a novel helical channeled cylindrical Li-ion battery with nanofluid and hybrid nanoparticle-enhanced phase change material. International Journal of Heat and Mass Transfer, 216 (124547). pp. 1-18. ISSN 0017-9310

Warimani, Mahammadsalman and Chaudhary, Zakir Ilahi and Khan, Sher Afghan and Bellary, Sayed Ahmed Imran and Alam, Noor and Muthuswamy, Sonachalam (2023) Analytical evaluation of loss mechanism effects on PDE performance with variation of refilling beta parameters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 66-78. E-ISSN 2289-7879

Kardile, Balasaheb Annasaheb and Pathan, Khizar Ahmed and Auti, Abhijeet Bhikashet and Khan, Sher Afghan (2023) Simulation of energy dissipation in BLDC Motor and analysis of speedacoustic characteristics. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 38-61. ISSN 2289-7895

Ramachandran, Elumalai and Krishnaiah, Ravi and Venkatesan, Elumalai Perumal and Parida, Satyajeet and Dwarshala, Siva Krishna Reddy and Khan, Sher Afghan and Asif, Mohammad and Linul, Emanoil (2023) Prediction of RCCI combustion fueled with CNG and algal biodiesel to sustain efficient diesel engines using machine learning techniques. Case Studies in Thermal Engineering (103630). pp. 1-38. E-ISSN 2214-157X

Alam, Mohammad Shafiul and Tasneem, Zabina and Khan, Sher Afghan and Rashid, Muhammad Mahbubur (2023) Effect of different modalities of facial images on ASD diagnosis using deep learning-based neural network. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (3). pp. 59-74. ISSN 2462-1943

Venkatesan, Elumalai Perumal and Rajendran, Silambarasan and Murugan, Manickam and Medapati, Sreenivasa Reddy and Murthy, Keerty Venkata Sri Ramachandra and Alwetaishi, Mamdooh and Khan, Sher Afghan and Saleel, Chanduveetil Ahamed (2023) Performance and emission analysis of biodiesel blends in a low heat rejection engine with an antioxidant additive: an experimental study. ACS omega, 8 (40). pp. 36686-36699. E-ISSN 2470-1343

Tun Ahmad Merahuddin, Tun Nurhanis and Khan, Ambareen and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2023) Control of base pressure at supersonic mach number in a suddenly expanded flow. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (1). pp. 210-225. ISSN 2289-7879

Kumar, K. Sunil and Kalos, Pritam Suryaprakash and Akhtar, Mohammad Nishat and Shaik, Saboor and Sundara, Vikram and Fayaz, H. and Khan, Sher Afghan and Asif, Mohammad (2023) Experimental and theoretical analysis of exhaust manifold by uncoated and coated ceramics (Al2O3, TiO2 and ZrO2). Case Studies in Thermal Engineering, 50. pp. 1-17. E-ISSN 2214-157X

Ramesh, Kumar R and Karthik, K and Elumalai, P.V. and Alshahrani, Saad and Ağbulut, Ümit and Saleel, C Ahamed and Shaik, Saboor and Khan, Sher Afghan (2023) Investigation of Nano composite heat exchanger annular Pipeline flow using CFD analysis for Crude Oil and Water Characteristics. Case Studies in Thermal Engineering, 49. pp. 1-23. ISSN 2214-157X

Bashir, Musavir and Parvathy, Rajendran and Khan, Ambareen and Vijayanandh, Raja and Khan, Sher Afghan (2023) Numerical investigation of turbulence models with emphasis on turbulent intensity at low Reynolds number flows. Advances in Aircraft and Spacecraft Science, 10 (4). pp. 1-13. ISSN 2287-528X E-ISSN 2287-5271

Fayaz, Hussain and Shaik, Saboor and Khan, Sher Afghan and Huynh, Van Van and Jilte, Ravindra D. and Sundara, Vikram and Asif, Mohammad and Linul, Emanoil (2023) Transient solidification and melting numerical simulation of lauric acid PCM filled stepped solar still basin used in water desalination process. Case Studies in Thermal Engineering, 49. pp. 1-16. E-ISSN 2214-157X

Quadros, Jaimon Dennis and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2023) Modeling and validation of base pressure for aerodynamic vehicles based on machine learning models. Computer Modeling in Engineering & Sciences, 137 (3). pp. 2331-2352. ISSN 1526-1492 E-ISSN 1526-1506

Balamurugan, K. and Shanmugam, Vigneshwaran and Palani, Geetha and Sundarakannan, R. and Sathish, T. and Linul, Emanoil and Khan, Sher Afghan and Asif, Mohammad (2023) Effect of TiC/RHA on solid particle erosion of Al6061 hybrid composites fabricated 2 through a 2-step ultrasonic-assisted stir casting process. Journal of Materials Research and Technology, 01473 (4). pp. 1-35. ISSN 2238-7854

Tarique, Altaf Hasan and Khan, Sher Afghan and Khalid, Farrukh and Azami, Muhammad Hanafi (2023) Development and assessment of a thermochemical cycle and SOFC-based hydrogen energy systems as a potential energy solution for the peak demand in a sustainable community. International Journal of Hydrogen Energy, 48 (56). pp. 1-8. ISSN 0360-3199 (In Press)

Shaik, Saboor and Vigneshwaran, Pethurajan and Roy, Abin and Kontoleon, Karolos J. and Mazzeo, Domenico and Cuce, Erdem and Saleel, C Ahamed and Alwetaishi, Mamdooh and Khan, Sher Afghan and Gürel, Ali Etem and Ağbulut, Ümit (2023) Experimental analysis on the impacts of soil deposition and bird droppings on the thermal performance of photovoltaic panels. Case Studies in Thermal Engineering, 48. pp. 1-11. ISSN 2214-157X

Turki, Al-Khalifa and Aabid, Abdul and Khan, Sher Afghan and Azami, Muhammad Hanafi and Baig, Muneer (2023) Response surface analysis of nozzle parameters at supersonic flow through microjets. Australian Journal of Mechanical Engineering, 21 (3). 1037 -1052. ISSN 1448-4846 E-ISSN 2204-2253

Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2023) Evaluation of derivative in damping in the Newtonian limit for non-planar wedge. Materials Today. pp. 1-3. ISSN 2214-7853 (In Press)

Krishnamoorthy, Ramalingam and Vellaiyan, Suresh and Venkatesan, Elumalai Perumal and Khan, Sher Afghan and Zakariya, Mahmoud and Saleel, Chanduveetil Ahamed (2023) Challenges and opportunities of Low Viscous Biofuel- a prospective review. ACS omega. pp. 1-16. ISSN 2470-1343

Khan, Huma and Khatoon, Shahida and Gaur, Prerna and Abbas, Mohamed and Saleel, Chanduveetil Ahamed and Khan, Sher Afghan (2023) Speed control of wheeled mobile robot by nature-inspired social spider algorithm-based PID controller. Processes, 11 (4). pp. 1-21. E-ISSN 2227-9717

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) Analysis and modeling of surface roughness in powder mix EDM and pure EDM using central composite design. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 243-254. ISSN 2462-1943

Sheikh, Javed S and Pathan, Khizar Ahmed and Kumar, Krishna and Khan, Sher Afghan (2023) Effectiveness of cone angle on surface pressure distribution along slant length of a cone at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104 (1). pp. 185-203. ISSN 2289-7879

Sathish, T and Pelluru, Suresh and Sharma, Kamal and Saravanan, R. and Saleel, C Ahamed and Shaikh, Saboor and Khan, Sher Afghan and Panchal, Hitesh (2023) Zero emission /energy building heating through parabolic dish collector focused KNO3–NaNO3 and KNO3–NaNO3–NaNO2 PCM absorber: a case study. Case Studies in Thermal Engineering, 44 (102854). pp. 1-10. ISSN 2214-157X

A., Shamitha and Crasta, Asha and Pathan, Khizer Ahmed and Khan, Sher Afghan (2023) Analytical and numerical simulation of surface pressure of an oscillating wedge at hypersonic Mach numbers and application of Taguchi's method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 15-30. ISSN 2462-1943

Quadros, Jaimon Dennis and Khan, Sher Afghan and T., Prashanth (2023) Experimental and numerical investigation of expansion corner effects on isolator performance. International Journal of Turbo & Jet Engines, Ahead of print. pp. 1-8. ISSN 0334-0082 E-ISSN 2191-0332

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) MRR and TWR study of powder mix EDM and pure EDM based on response surface methodology. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 13-26. ISSN 2289-7895

Shamitha, Shamitha and Crasta, Asha and Pathan, Khizar Ahmed and Khan, Sher Afghan (2023) Numerical simulation of surface pressure of a wedge at supersonic Mach numbers and application of design of experiments. Journal of Advanced Research in Applied Mechanics, 101 (1). pp. 1-18. E-ISSN 2289-7895

Shaikh, Javed S. and Kumar, Krishna and Pathan, Khizar A. and Khan, Sher Afghan (2023) Computational analysis of surface pressure distribution over a 2D wedge in the supersonic and hypersonic flow regimes. Fluid Dynamics and Materials Processing, 19 (6). pp. 1637-1653. ISSN 1555-256X E-ISSN 1555-2578

Ridwan, R and Khan, Sher Afghan and Syed Mohamed Ali, Jaffar and Sapardi, Mohd Azan Mohammed and Aabid, Abdul (2023) Numerical analysis of cavity-based control of base pressure variations at supersonic Mach numbers. Fluid Dynamics & Materials Processing, 23 (3). pp. 1-23. ISSN 1555-256X E-ISSN 1555-2578

Husnina, Nur and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer and Shaiq, Istiyaq Mudassir (2023) Passive control of base pressure in a converging-diverging nozzle with area ratio 2.56 at mach 1.8. Fluid Dynamics and Manufacturing Process, 19 (3). pp. 569-577. ISSN 1555-256X E-ISSN 1555-2578

Jaimon, Dennis Quadros and Khan, Sher Afghan and Prashanth, T. and Mogul, Yakub Iqbal and Hanumanthraya, R and Abbas, Mohammad and Saleel, Ahamed and Shaik, Saboor (2022) Heat transfer characteristics of fullerene and titania nanotube nanofluids under agitated quench conditions. ACS Omega, 7 (51). pp. 47764-47783. E-ISSN 2470-1343 (In Press)

Ridwan, Ridwan and Rosnin, Muhammed Ammar Rusydi and Aabid, Abdul and Khan, Sher Afghan and Mohamed Ali, Jaffar Syed and Mohammed Sapardi, Mohd Azan (2022) Effect of expansion level and relief to shear layer in a suddenly expanded flow: a CFD approach. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100 (3). pp. 202-229. E-ISSN 2289-7879

Quadros, Jaimon Dennis and Nagpal, Chetna and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2022) Investigation of suddenly expanded flows at subsonic Mach numbers using an artificial neural networks approach. Plos one, 17 (10). pp. 1-28. ISSN 1932-6203

Shabana, Aysha and Crasta, Asha and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2022) Computation of stiffness and damping derivatives of an Ogive in a limiting case of mach number and specific heat ratio. Fluid Dynamics & Materials Processing, 23 (3). pp. 1-19. ISSN 1555-256X E-ISSN 1555-2578

Quadros, Jaimon Dennis and P, Suhas and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer and Mogul, Yakub I. (2022) Fuzzy-based prediction for suddenly expanded axisymmetric nozzle flows with microjets. Bulletin of the Polish Academy of Sciences: Technical Sciences, 70 (5). pp. 1-11. ISSN 2300-1917

Thejaraju, Rajashekaraiah and Bettaiah, Girisha Kanuvanahalli and Rajendaran, Parvathy and Abbas, Muhammad Mujtaba and Khan, Sher Afghan and Saleel, Ahamad C. (2022) Numerical modelling and experimental validation of novel para winglet tape for heat transfer enhancement. Mathematics, 10 (2893). pp. 1-21. ISSN 2227-7390

Raja, Vijayanandh and Gnanasekaran, Raj Kumar and Kaladgi, Abdul Razak and Rajendran, Parvathy and Khan, Sher Afghan and Asif, Mohammad (2022) Multi-disciplinary computational investigations on asymmetrical failure factors of disc brakes for various CFRP materials: a validated approach. Symmetry, 14 (8). pp. 1-45. ISSN 2073-8994

Ridwan, R and Zuraidi, Nur Husnina Muhamad and Shaikh, Istiyak Mudassir and Khan, Sher Afghan (2022) Passive control of base pressure using cavities in a sudden expansion duct: a CFD approach. Journal of Mechanical Engineering Research and Developments, 45 (3). pp. 44-70. ISSN 1024-1752

Abid, Abdul and Khan, Sher Afghan and Baig, Muneer (2022) Numerical analysis of a microjet-based method for active flow control in convergent-divergent nozzles with a sudden expansion duct. Fluid Dynamics & Material Processing, Special Issue (1). pp. 1-24. ISSN 1555-256X E-ISSN 1555-2578

Jaimon, Dennis Quadros and Khan, Sher Afghan and Prashanth, T. (2022) CFD-based optimization of base pressure behavior on suddenly expanded flows at supersonic Mach numbers. Progress in Computational Fluid Dynamics, 22 (3). pp. 159-173. ISSN 1468-4349 E-ISSN 1741-5233

Ayesha, Shabana and Crasta, Asha and Ridwan, R and Khan, Sher Afghan (2022) Computation of damping derivative of an Ogive at highspeed flow. Journal of Mechanical Engineering Research and Developments, 45 (2). pp. 151-165. ISSN 1024-1752

Ridwan, R and Muhamad Zuraidi, Nur Husnina and Khan, Sher Afghan (2022) Impact of cavity location on base pressure at Supersonic Mach 1.8. Journal of Mechanical Engineering Research and Development, 45 (2). pp. 123-150. ISSN 1024-1752

Fayaz, Hussain and Khan, Sher Afghan and Saleel, Ahamad C. and Shaik, Saboor and Yusuf, Abdulfatah Abdu and Veza, Ibham and Fattah, I. M. Rizwanul and Rawi, Nurul Fazita Mohammad and Asyraf, M. R. M. and Alarif, Ibrahim M. (2022) Developments in nanoparticles enhanced biofuels and solar energy in Malaysian perspective: a review of state of the art. Journal of Nanomaterials, 2022. pp. 1-22. ISSN 16874129 E-ISSN 16874110

Ganapathy, Ponnambalam Arul and Thulasi, Selvam and Kumar, Pitchaipillai and Veeranan, Arunprasad and Shaik, Saboor and Abbas, Mohammad and Rajendran, Parvathy and Khan, Sher Afghan and Saleel, Ahmed C (2022) Investigation of dual–pass inclined oscillating bed solar dryer for drying of non-parboiled paddy grains. Sustainability, 14 (9). pp. 1-13. ISSN 2071-1050

Aabid, Abdul and Perveez, Bisma and Perveen, Nagma and Khan, Sher Afghan and Raheman, Md Abdul and Zayan, Jalal Mohammed and Shabbir, Omer (2022) Reviews on design and development of unmanned aerial vehicle (drone) for different applications. Journal of Mechanical Engineering Research and Developments, 45 (2). pp. 53-69. ISSN 1024-1752

Warimani, Mahammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris and Saharin, Sanisah and Ariffin, Ahmad Kamal and Chavan, Vijaykumar (2022) Analytical assessment of blended fuels for pulse detonation engine performance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 1-16. ISSN 2811-3950

Shaikh, Javed S and Kumar, Krishna and Pathan, Khizer Ahmed and Khan, Sher Afghan (2022) Analytical and computational analysis of pressure at the nose of a 2D wedge in high-speed flow. Advances in Aircraft and Spacecraft Science, 9 (2). pp. 119-130. ISSN 2287-528X E-ISSN 2287-5271

Samuel, Merryisha and Rajendran, Parvathy and Khan, Sher Afghan (2022) CFD Simulation of NACA 2412 airfoil with new cavity shapes. Advances in Aircraft and Spacecraft, 9 (2). pp. 131-148. ISSN 2287-528X E-ISSN 2287-5271

Derrar, Khaoula and Zaabat, Mourad and Rouabah, Nouhad and Nazir, Roshan and Hanini, Faouzi and Hafdallah, Abdelkader and Khan, Sher Afghan and Alsaiari, Norah Salem and Katubi, Khadijah Mohammedsaleh and Abualnaja, Khamael M. (2022) Preparation of Sb: SnO2 thin films and their effect on optoelectrical properties. Journal of Materials Science: Materials in Electronics -, 33 (9). pp. 1-12. ISSN 09574522 E-ISSN 1573482X

Kumar, Sunil S and Londe, Neelakantha V and Kumar, Dilip K and Kittur, Md Ibrahim and Badruddin, Irfan Anjum and Faheem, Mohammed and Khan, Sher Afghan (2022) On mechanical response of aluminum alloys in corrosive environment. International Journal of Integrated Engineering, 14 (1). pp. 48-56. ISSN 2229-838X E-ISSN 2600-7916

Jaimon, Dennis Quadros and Prashanth, T. and Khan, Sher Afghan (2022) Base drag estimation in suddenly expanded supersonic flows using backpropagation genetic and recurrent neural networks. Journal of Aerospace Engineering, 236 (3). pp. 1-28. ISSN 0954-4100 E-ISSN 2041-3025 (In Press)

Ridwan, R and Chaudhary, Zakir Ilahi and Baig, Maugal Ahmed Ali and Suheel, J I and Khan, Sher Afghan and Faheem, Mohammed (2022) Response of active control on the flow field of the duct pressure at supersonic Mach numbers. Materials Today, 59 (1). pp. 951-958. ISSN 2214-7853

Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan and Parvathy, Rajendran and Erwin, Sulaeman (2022) Comparative study of quasi steady and unsteady damping derivatives for delta wings in hypersonic flow for half sine wave. Journal of Advanced Research in Fluid Mechanics and Thermal Science, 92 (1). pp. 1-8. ISSN 22897879 E-ISSN 2811-3950

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2022) Advanced pneumatic mechanical system for water treatment application: dosing rate assessment for lime dosage. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 91 (1). pp. 46-55. ISSN 2811-3950 E-ISSN 2289-7879

Aabid, Abdul and Murtuza, Mohammed Ali and Khan, Sher Afghan and Baig, Muneer (2022) Optimization of dry sliding wear behavior of aluminum-based hybrid MMC's using experimental and DOE methods. Journal of Materials Research and Technology, 16 (1). pp. 743-763. ISSN 2238-7854

Aabid, Abdul and Perveez, Bisma and Perveen, Nagma and Khan, Sher Afghan and Shabbir, Omar (2022) A case study of unmanned aerial vehicle (drone) technology and its applications in the COVID-19 pandemic. Journal of Mechanical Engineering Research and Developments, 45 (2). pp. 70-77. ISSN 1024-1752

Aabid, Abdul and Shabbir, Omar and Khan, Sher Afghan (2021) History and analysis of knowledge in Islamization of aerospace engineering. Karachi Islamicus, 1 (2). pp. 42-52. ISSN 2790-6558 E-ISSN 2790-654X

Quadros, Jaimon Dennis and Khan, Sher Afghan and T., Prashanth (2021) Analysis of parallel flow type internally cooled membrane-based liquid desiccant dehumidifier using a neural networks approach. Science and Technology for the Built Environment, 27 (11). pp. 1-19. ISSN 2374-4731 E-ISSN 2374-474X (In Press)

Aabid, Abdul and Khan, Sher Afghan and Afzal, Asif and Baig, Muneer (2021) Investigation of tiny jet locations effect in a sudden expansion duct for high-speed flow control using experimental and optimization methods. Meccanica, 56 (11). pp. 1-26. ISSN 0025-6455 E-ISSN 1572-9648

Afzal, Asif and Bhutto, Javed Khan and Alrobaian, Abdulrahman and Kaladgi, Abdul Razak and Khan, Sher Afghan (2021) Modeling and computational experiment to obtain optimized neural network for battery thermal management data. Energies, 14 (7370). pp. 1-19. ISSN 1996-1073

Afzal, Asif and Alshahrani, Saad and Alrobaian, Abdulrahman and Buradi, Abdulrajak and Khan, Sher Afghan (2021) Power plant energy predictions based on thermal factors using ridge and support vector regressor algorithms. Energies, 14 (7254). pp. 1-22. ISSN 1996-1073

Kumar, S. Senthil and K., Rajan and Vinayagam, Mohanavel and Manickam, Ravichandran and Rajendran, Parvathy and Rashedi, Ahmad and Sharma, Abhishek and Khan, Sher Afghan and Afzal, Asif (2021) Combustion, performance, and emission behaviors of biodiesel fueled diesel engine with the impact of Alumina Nanoparticle as an additive. Sustainability, 13 (12103). pp. 1-20. ISSN 2071-1050

Asadullah, Mohammed and Khan, Sher Afghan and Rajendran, Parvathy and Sulaeman, Erwin (2021) Design intent of future tunnels. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (2). pp. 50-63. ISSN 2289-7879

Jaimon, Dennis Quadros and Khan, Sher Afghan and Aabid, Abdul and Alam, Mohammad Shohag and Baig, Muneer (2021) Machine learning applications in modelling and analysis of base pressure in suddenly, expanded flows. Aerospace, 8 (318). pp. 1-23. ISSN 2226-4310

Aabid, Abdul and Mohd Zakuanl, Muhammad Amir Mirza and Khan, Sher Afghan and Ibrahim, Yasser E. (2021) Structural analysis of three-dimensional wings using finite element method. Aerospace Systems, 4 (3). pp. 1-22. ISSN 2523-3947 E-ISSN 2523-3955

Pathan, Khizar A. and Khan, Sher Afghan and Shaikh, Aadil N. and Pathan, Arsalan A. and Khan, Shahnawaz A. (2021) An investigation of boat tail helmet to reduce drag. Advances in Aircraft and Spacecraft Science, 8 (3). pp. 239-250. ISSN 2287-528X E-ISSN 2287-5271

Viannie, Leema Rose and Banapurmath, N.R. and Soudagar, Manzoore Elahi M. and Nandi, Anilkumar V. and Hossain, Nazia and Shellikeri, Ashwini and Kaulgud, Vinita and Mujtaba, MA and Khan, Sher Afghan and Asif, Mohammad (2021) Electrical and mechanical properties of flexible multiwalled carbon nanotube/poly (dimethylsiloxane) based nanocomposite sheets. Journal of Environmental Chemical Engineering, 9 (6). pp. 1-8. ISSN 2213-3437

Ismail, Atifatul Ismah and Khan, Sher Afghan and Rajendran, Parvathy and Sulaeman, Erwin (2021) Effect of cavities in suddenly expanded flow at supersonic mach number. CFD Letters, 13 (9). pp. 57-71. ISSN 2180-1363

Mokashi, Imran and Afzal, Asif and Al-Mdallal, Qasem and Sundar, L. Syam and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Saleel, C Ahamed (2021) Effect of non-conjugate and conjugate condition on heat transfer from the battery pack. Alexandria Engineering Journal, 60. pp. 1-15. ISSN 1110-0168 (In Press)

Jaimon, Dennis Quadros and Khan, Sher Afghan and Hanumantharaya, R (2021) Influence of tab corner geometry on supersonic jets. Aircraft Engineering and Aerospace Technology, 92 (3). pp. 1-8. ISSN 0002-2667

Kumbar, Shobha Suresh and Jadhav, Dipak Ashok and Jarali, Chetan S. and Talange, Dhananjay B. and Afzal, Asif and Khan, Sher Afghan and Asif, Mohammad and Abdullah, Mohd. Zulkifly (2021) Enhancement in Cathodic Redox Reactions of Single-Chambered Microbial Fuel Cells with Castor Oil-Emitted Powder as Cathode Material. Materials, 14 (4454). pp. 1-13. ISSN 1996-1944

Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris and Saharin, Sanisah and Ariffin, Ahmad Kamal (2021) Internal flow dynamics and performance of pulse detonation engine with alternative fuels. Energy, 237. pp. 1-10. ISSN 0360-5442

Meignanamoorthy, M and Ravichandran, Manickam and Mohanavel, Vinayagam and Afzal, Asif and Sathish, T and Alamri, Sagr and Khan, Sher Afghan and Saleel, Ahamad C. (2021) Microstructure, Mechanical Properties, and Corrosion Behavior of Boron Carbide Reinforced Aluminum Alloy (Al-Fe-Si-Zn-Cu) Matrix Composites Produced via Powder Metallurgy Route. Materials, 14 (4315). pp. 1-24. ISSN 1996-1944

Aabid, Abdul and Khan, Sher Afghan and Baig, Muneer (2021) A critical review of supersonic flow control for high-speed applications. Applied Sciences, 11 (6899). pp. 1-26. ISSN 2076-3417

Goswami, Shankha Shubhra and Behera, Dhiren Kumar and Afzal, Asif and Kaladgi, Abdul Razak and Khan, Sher Afghan and Rajendran, Parvathy and Subbiah, Ram and Asif, Mohammad (2021) Analysis of a robot selection problem using two newly developed hybrid MCDM models of TOPSIS‐ARAS and COPRAS‐ARAS. Symmetry, 13 (8). pp. 1-35. ISSN 2073-8994

Quadros, Jaimon D. and Khan, Sher Afghan and Prashanth, T. (2021) Study of buzz phenomenon in suddenly expanded flow structure using experiments and visualization. Numerical Heat Transfer, Part B: Fundamentals An International Journal of Computation and Methodology. pp. 1-18. ISSN 1521-0626 E-ISSN 1040-7790

Munimathan, Arunkumar and Vinayagam, Mohanavel and Afzal, Asif and Thanikodi, Sathish and Manickam, Ravichandran and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Asif, Mohammad (2021) A study on performance and emission characteristics of diesel engine using Ricinus Communis (Castor Oil) Ethyl Esters. Energies, 14 (4320). pp. 1-19. ISSN 1996-1073

Satish, T. Sathish and Mohanavel, V. and Afzal, Asif and Arunkumar, M. and Ravichandran, M. and Khan, Sher Afghan and Rajendaran, Parvathy and Asif, Mohammad (2021) Advancement of steam generation process in water tube boiler using Taguchi design of experiments. Case Studies in Thermal Engineering, 27 (101247). pp. 1-15. ISSN 2214-157X

Aabid, Abdul and Khairulaman, Liyana Nabilah Binti and Khan, Sher Afghan (2021) Analysis of flows and prediction of CH10 airfoil for unmanned arial vehicle wing design. Advances in Aircraft and Spacecraft Science, 8 (2). pp. 87-109. ISSN 2287-528X E-ISSN 2287-5271

Talikoti, Mohammed Aqeel and Kittur, M I and Reddy, Avala Raji and Baig, Maughal Ahmed Ali and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Influence of high and subsequent low-temperature artificial aging on exfoliation corrosion of AA2024. Materials Today, 47. pp. 6147-6152. ISSN 2214-7853

Akhtar, Mohammad Nishat and Khan Mohammed, Muneer and Khan, Sher Afghan and Afzal, Asif and Subbiah, Ram and Sheikh, Nazeer Ahmed and Husain, Murtuja and Butt, Mohammad Mursaleen and Othman, Abdul Rahim and Elmi, Abu Bakar (2021) Determination of non-recrystallization temperature for niobium microalloyed steel. Materials, 14 (10). pp. 1-14. ISSN 1996-1944

Siddique, Umair M and Syed, Ashfaq and Khan, Sher Afghan and Meyer, Josua P. (2021) On numerical investigation of heat transfer augmentation of flat target surface under impingement of steady air jet for varying heat flux boundary condition. Journal of Thermal Analysis and Calorimetry. ISSN 1388-6150 E-ISSN 1588-2926

Shabana, Aysha and Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2021) Estimation of stiffness derivative for ogives at constant specific heat ratio γ = 1.666 at hypersonic mach numbers. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12 (10). pp. 316-325. E-ISSN 1309-4653

Aabid, Abdul and Khan, Sher Afghan (2021) Studies on flows development in a suddenly expanded circular duct at supersonic mach numbers. International Journal of Heat and Technology, 39 (1). pp. 185-194. ISSN 0392-8764

Hoda, Asif and Rahman, Mohammad Tariqur and Asrar, Waqar and Khan, Sher Afghan (2021) A comparative study of natural gas and biogas combustion in a swirling flow gas turbine combustor. Combustion Science and Technology, 193 (4). pp. 1-29. ISSN 0010-2202 E-ISSN 1563-521X

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Azan M. (2021) Experimental study on the mean flow characteristics of a supersonic multiple jet configuration. Journal of Aerospace Science & Technology, 108 (2021). pp. 1-13. ISSN 1270-9638 E-ISSN 1626-3219

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Mohd Azan Mohammed (2021) Experimental investigation of the effect of cross wire on the flow field of elliptic jet. International Journal of Heat and Fluid Flow, 90 (108834). pp. 1-12. ISSN 0142-727X

Afzal, Asif and Aabid, Abdul and Khan, Ambareen and Khan, Sher Afghan and Rajak, Upendra and Verma, Tikendra Nath and Kumar, Rahul (2020) Response surface analysis, clustering, and random forest regression of pressure in suddenly expanded high-speed aerodynamic flows. Aerospace Science and Technology, 107. pp. 1-30. ISSN 1270-9638

Mokashi, Imran and Afzal, Asif and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Jilte, Ravindra D. and Samuel, Olusegun David (2020) Nusselt number analysis from a battery pack cooled by different fluids and multiple back-propagation modelling using feed-forward networks. International Journal of Thermal Science. pp. 1-20. ISSN 1290-0729 (In Press)

Afzal, Asif and Mokashi, Imran and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi (2020) Optimization and analysis of maximum temperature in a battery pack affected by low to high Prandtl number coolants using response surface methodology and particle swarm optimization algorithm. Numerical Heat Transfer, Part A: Applications. ISSN 1521-0634 E-ISSN 1040-7782 (In Press)

Al-Ghurabi, Ebrahim H. and Asif, Mohammad and Siva Kumar, Nadavala and Khan, Sher Afghan (2020) Fluidization dynamics of hydrophobic nanosilica with velocity step changes. Applied Sciences, 10 (22). pp. 1-12. ISSN 2076-3417

Aabid, Abdul and Khan, Sher Afghan (2020) Investigation of high-speed flow control from CD nozzle using design of experiments and CFD methods. Arabian Journal of Science and Engineering. pp. 1-30. ISSN 2193-567X E-ISSN 2191-4281 (In Press)

Dabhade, Ameya and Pathan, Khizar Ahmed and Khan, Sher Afghan and Jadhav, Akash (2020) Design and development of chassis for formula student vehicle. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (10). pp. 1121-1130. ISSN 0976-6480 E-ISSN 0976-6499

Quadros, Jaimon D. and Khan, Sher Afghan and Sapkota, Sanjeev and John, Vikrama and Prashanth, T (2020) On recirculation region length of suddenly expanded supersonic flows, using CFD and fuzzy logic. International Journal of Computational Fluid Dynamics. pp. 1-17. ISSN 1061-8562 E-ISSN 1029-0257 (In Press)

Kumar, Rahul and Kumar, Veera Sesha and Butt, M. Mursaleen and Sheikh, Nazir Ahmed and Khan, Sher Afghan and Afzal, Asif (2020) Thermo-mechanical analysis and estimation of turbine blade tip clearance of a small gas turbine engine under transient operating conditions. Applied Thermal Engineering, 179. pp. 1-32. ISSN 1359-4311

Shaikh, Sohel Khalil and Pathan, Khizar Ahmed and Chaudhary, Zakir Ilahi and Khan, Sher Afghan (2020) CFD analysis of an automobile catalytic converter to obtain flow uniformity and to minimize pressure drop across the monolith. CFD Letters, 12 (9). pp. 116-128. ISSN 2180-1363

Shaikh, Sohel Khalil and Pathan, Khizer Ahmed and Chaudhary, Zakir Ilahi and Marlpalle, B. G. and Khan, Sher Afghan (2020) An investigation of three-way catalytic converter for various inlet cone angles using CFD. CFD Letters, 12 (9). pp. 76-90. ISSN 2180-1363

Afzal, Asif and Khan, Sher Afghan and Islam, Md. Tariqul and Jilte, R. D. and Khan, Ambareen and Soudagar, Manzoore Elahi M (2020) Investigation and back-propagation modeling of base pressure at sonic and supersonic Mach numbers. Physics of Fluids, 32 (9). pp. 1-18. ISSN 1070-6631 E-ISSN 1089-7666

Mokashi, Imran and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Afzal, Asif (2020) Maximum temperature analysis in a Li-ion battery pack cooled by different fluids. Journal of Thermal Analysis and Calorimetry, 141 (6). pp. 2555-2571. ISSN 1388-6150 E-ISSN 1588-2926

Aabid, Abdul and Khan, Sher Afghan (2020) Determination of wall pressure flows at supersonic Mach numbers. Materials Today, 38. pp. 2347-2352. ISSN 2214-7853

Siddiqui, Mohammad Umair and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2020) Numerical investigation of semi-empirical relation representing nusselt number under waterjet impingement. Journal of Thermophysics and Heat Transfer, 34 (3). pp. 579-590. ISSN 0887-8722

Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2020) Estımatıon of hypersonıc unsteady and qausı-steady dampıng derıvatıves for a delta wings at large incıdence. International Journal of Advanced Science and Technology, 29 (6). pp. 6844-6863. ISSN 2005-4238 E-ISSN 2207-6360

Ansari, Emad and Siddiqui, M. Umair and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Ilmi, Abu Bakar (2020) Numerical investigation of mathematical non-dimensional constant representing smoothness in the Nusselt profile. CFD Letters, 12 (6). pp. 16-27. ISSN 2180-1363

Afifi, Azmil and Aabid, Abdul and Khan, Sher Afghan (2020) Numerical investigation of splitter plate effect on the bluff body using finite volume method. Materials Today: Proceedings, 38 (10.1016/j.matpr.2020.05.559). pp. 2181-2190. ISSN 2214-7853 (In Press)

SHAMITHA, A and Crasta, Asha and Khan, Sher Afghan and VASAVI, P (2020) Computation of stability derivative for a wing for specific heat ratio= 1.66 for hypersonic flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (special Issue). pp. 208-218. ISSN 2249–6890 E-ISSN 2249–8001

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2020) Enlarge duct length optimization for suddenly expanded flows. Advances in Aircraft and Spacecraft Science, 7 (3). pp. 203-214. ISSN 2287-528X E-ISSN 2287-5271

Siddiqui, Umair and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2020) Numerical investigation of secondary peaks in Nusselt profile under water jet impingement. Journal of Thermophysics and Heat Transfer, 34 (2 (April-June)). pp. 421-428. ISSN 0887-8722 E-ISSN 1533-6808

Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2020) Analytical estimation of stability derivatives of wing with curved leading edges at hypersonic mach number. Test Engineering & Management, 83 (2). pp. 13808-13819. ISSN 0193-4120

Bashir, Musavir and Khan, Sher Afghan and Choudhary, Zakir Ilahi and Shinde, V. S. (2020) Wall Pressure Measurements Beneath the Supersonic Jets in an Abruptly Augmented Nozzle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (2). pp. 20-31. ISSN 2289-7879

Quadros, Jaimon Dennis and Khan, Sher Afghan (2020) Prediction of base pressure in a suddenly expanded flow process at supersonic mach number regimes using ANN and CFD. Journal of Applied Fluid Mechanics, 13 (2). pp. 499-511. ISSN 1735-3572 E-ISSN 1735-3645

Pathan, Khizar Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2020) An investigation of effect of control jets location and blowing pressure ratio to control base pressure in suddenly expanded flows. Journal of Thermal Engineering,, 6 (2 (Special Issue 11)). pp. 15-23. E-ISSN 2148-7847

Delvi, Hamza Afser and Faheem, Mohammed and Aabid, Abdul and Math, M.C. and Khan, Sher Afghan (2020) Investigation of characteristics of spark ignition engine fuelled with ethanol-gasoline blends using Iso-octane additive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1). pp. 151-163. ISSN 2289-7879

Sethuraman, Vigneshvaran and Rajendaran, Parvathy and Khan, Sher Afghan (2020) Base and wall pressure control using cavities and ribs in suddenly expanded flows -an overview. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1). pp. 120-134. ISSN 2289-7879

Prashant, Jagadesh and Antony, Alappat Joseph and Khan, Sher Afghan (2020) Experimental investigation on the performance of single spark ignition and twin spark ignition engine fuelled with ethanol-gasoline blends. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 25-41. ISSN 2289-7879

Khan, Sher Afghan and Siddique, Umair M and Ansari, Emaad and Patil, Rajesh (2020) Numerical investigation of semi-empirical relation representing standard deviation in Nusselt profile due to water jet impingement. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 42-53. ISSN 2289-7879

Mohd, Umair Siddiqui and Ansari, Emaad and Khan, Sher Afghan and Gulhane, Nitin Parashram and Patil, Rajesh (2020) Numerical investigation of non-dimensional constant and empirical relation representing Nusselt profile non-uniformity. Journal of Thermophysics and Heat Transfer, 34 (1). pp. 1-15. ISSN 0887-8722

Afzal, Asif and A. D., Mohammad Samee and R. K., Abdul Razzak and Khan, Sher Afghan and Khan, Hurmatulla (2020) Optimum spacing between grooved tubes: an experimental study. Journal of Mechanical Science and Technology, 34 (1). pp. 469-475. ISSN 1226-4865

Khan, Sher Afghan and Bashir, Musavir and Baig, Maugal Ahmed Ali and Mehaboob Ali, Fharukh Ahmed Ghasi (2020) Comparing the effect of different turbulence models on the CFD predictions of NACA0018 airfoil aerodynamics. CFD Letters, 12 (3). pp. 1-10. ISSN 2180-1363

Quadros, Jaimon Dennis and Khan, Sher Afghan and Prashanth, T. (2020) Experimental and numerical investigation of suddenly expanded flow field for supersonic Mach numbers with and without annular cavities. International Journal of Fluid Mechanics Research, 47 (4). pp. 337-356. ISSN 2152-5102 E-ISSN 2152-5110

Quadros, Jaimon Dennis and Khan, Sher Afghan (2020) Prediction of base pressure in a suddenly expanded flow the processes at supersonic Mach Number Regimes using ANN and CFD. Journal of Applied Fluid Mechanics, 13 (2). pp. 499-511. ISSN 1735-3572 E-ISSN 1735-3645

Al-Khalifah, Turki and Aabid, Abdul and Khan, Sher Afghan (2020) Regression analysis of flow parameters at high Mach numbers. Solid State Technology, 63 (6). pp. 5473-5488. ISSN 0038-111X

Pathan, Khizar Ahmed and Syed, Ashfaq and Dabeer, Prakash S and Khan, Sher Afghan (2019) Analysis of parameters affecting thrust and base pressure in suddenly expanded flow from nozzle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (1). pp. 1-18. ISSN 2289-7879

Mohd, Umair Siddique and Ansari, Emaad and Khan, Sher Afghan and Gulhane, Nitin Parashram and Patil, Rajesh (2019) Numerical investigation of nondimensional constant and empirical relation representing nusselt profile nonuniformity. Journal of Thermophysics and Heat Transfer, 34 (1). pp. 215-229. ISSN 0887-8722 E-ISSN 1533-6808

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) Estimation of stiffness derivative of an ogive for specific heat ratio 1.666. Test Engineering and Management, 81 (11-12). pp. 5091-5100. ISSN 0193-4120

Aabid, Abdul and Jyothi, J and Zayan, Jalal Mohammed and Khan, Sher Afghan (2019) Experimental and numerical investigation on gas turbine blade with the application of thermal barrier coatings. Advances in Materials Research, 8 (4). pp. 275-293. ISSN 2234-0912 E-ISSN 2234-179X

Aabid, Abdul and Afifi, Azmil and Mehaboobali, Fharukh Ahmed Ghasi and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2019) CFD analysis of splitter plate on bluff body. CFD Lettrs, 11 (11). pp. 25-38. ISSN 2180-1363

Aabid, Abdul and Chaudhary, Zakir Ilahi and Khan, Sher Afghan (2019) Modeling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 34-51. ISSN 2289-7879 E-ISSN 2289-7879

Mohd Zakuan, Muhammad Amir Mirza and Aabid, Abdul and Khan, Sher Afghan (2019) Modeling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 6820-6828. ISSN 2249-8958

Aabid, Abdul and Chaudhary, Zakir Ilahi and Khan, Sher Afghan (2019) Modelling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 34-51. ISSN 2289-7879

Afzal, Asif and Khan, Sher Afghan and Saleel, Ahmed (2019) Role of ultrasonication duration and surfactant on characteristics of ZnO and CuO nanofluids. Materials Research Express, 6 (11). pp. 1-13. ISSN 2053-1591 E-ISSN 2053-1591

Delvi, Hamza Afser and Faheem, Mohammed and Khan, Sher Afghan and Kumar M., Kiran and Kareem Ullah, Mohammad (2019) Effect of ethanol-gasoline blends on performance, combustion and emission characteristics of spark ignition engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 209-220. ISSN 2289-7879

Sajali, Muhammad Fahmi Mohd and Syed, Ashfaq and Aabid, Abdul and Khan, Sher Afghan (2019) Simulation of effect of various distances between front and rear body on drag of a non-circular cylinder. Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 53-65. ISSN 2289-7879

Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2019) Estimation of damping derivatives for delta wings in hypersonic flow for straight leading edge. International Journal of Mechanical and Production Engineering Research and Development, 9 (5). pp. 255-264. ISSN 2249-6890 E-ISSN 2249-8001

Renita, sharon Monis and Crasta, Asha and Faheem, Mohammed and Khan, Sher Afghan (2019) Analysis of damping derivatives for delta wings in hypersonic flow for curved leading edges with full sine wave. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 5457-5466. ISSN 2249-8958

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) Damping derivative evaluation in pitch for an ogive at high mach numbers. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). pp. 1307-1317. E-ISSN 2278-3075

Mohd Zakuan, Muhammad Amir Mirza and Aabid, Abdul and Khan, Sher Afghan (2019) Modelling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology, 9 (1). pp. 6820-6828. ISSN 2249-8958

Kharulaman, Liyana and Aabid, Abdul and Mehaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan (2019) Research onFlows for NACA 2412 airfoil using computational Fluid dynamics method. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 5450-5456. ISSN 2249 – 8958

Khan, Sher Afghan and Aabid, Abdul and Mokashi, Imran and Ahmad, Zaheer (2019) Effect of micro jet control on the flow filed of the duct at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1758-1762. E-ISSN 2277-3878

Faheem, Mohammad and Kareem Ullah, Mohammad and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Experiment on of nozzle flow with sudden expansion at Mach 1.1. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1769-1775. E-ISSN 2277-3878

Khan, Sher Afghan and Ahmad, Zaheer and Aabid, Abdul and Mokashi, Imran (2019) Experimental research on flow development and control effectiveness in the duct at high speed. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1763-1768. E-ISSN 2277-3878

Sethuraman, Vigneshvaran and Rajendran, Parvathy and Khan, Sher Afghan (2019) A cost-effective data acquisition instrumentation for measurement of base pressure and wall pressure in suddenly expanded flow through ducts. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (1). pp. 112-123. E-ISSN 2289-7879

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Control of CD nozzle flow using microjets at Mach 2.1. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 631-635. ISSN 2278-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Effects of micro jets on the flow field of the duct with sudden expansion. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 636-640. E-ISSN 2277-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Numerical simulations of a CD nozzle and the influence of the duct length. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 622-630. ISSN 2278-3075

Khan, Sher Afghan and Aabid, Abdul and Chaudhary, Zakir Ilahi (2019) Influence of control mechanism on the flow field of duct at Mach 1.2 for area ratio 2.56. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1135-1138. ISSN 2278-3075

G M, Fharukh and Khan, Sher Afghan (2019) Control of nozzle flow using microjets at supersonic Mach Regime. International Journal of Engineering, 32 (7). pp. 991-998. ISSN 1025-2495 E-ISSN 1735-9244

G. M., Fharukh Ahmed and Khan, Sher Afghan (2019) Effect of area ratio on base pressure and control effectiveness. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 953-958. E-ISSN 2277-3878

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Effect of nozzle pressure ratio and control jets location to control base pressure in suddenly expanded flows. Journal of Applied Fluid Mechanics, 12 (4). pp. 1127-1135. ISSN 1735-3572 E-ISSN 1735-3645

Monis, Renita Sharon and Shabana, Aysha and Crasta, Asha and Khan, Sher Afghan (2019) Effect of sweep angle and a half sine wave on roll damping derivative of a Delta Wing. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 984-989. E-ISSN 2277-3878

Azami, Muhammad Hanafi and Faheem, Mohammed and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Experimental research of wall pressure distribution and effect of micro jet at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3). pp. 1000-1003. E-ISSN 2277-3878

Khan, Sher Afghan and Mokashi, Imran and Aabid, Abdul and Faheem, Mohammad (2019) Experimental research on wall pressure distribution in C-D nozzle at Mach number 1.1 for area ratio 3.24. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 971-975. E-ISSN 2277-3878

Azami, Muhammad Hanafi and Faheem, Mohammed and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Inspection of supersonic flows in a CD nozzle using experimental method. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3). pp. 996-999. ISSN 2277-3878

Siddiqi, Mohammad Umar and Gulhane, P. Nitin and Khan, Sher Afghan and Taler, Jan and Cebula, Arthur and Oclon, Pawel and Patil, Rajesh (2019) Numerical investigation of semiempirical relations representing the local Nusselt number magnitude of a pin fin heat sink. Heat Transfer—Asian Research, 48 (5). pp. 1857-1888. ISSN 1099-2871 E-ISSN 1523-1496

G. M, Fharukh Ahmed and Khan, Sher Afghan (2019) Role of active control in increasing base pressure at Sonic Mach Number. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 966-970. E-ISSN 2277-3878

Khan, Sher Afghan and Aabid, Abdul and Ghasi, Fharukh Ahmed Mehaboobali and Al-Robaian, Abdulrahman and Alsagri, Ali Sulaiman (2019) Analysis of area ratio in a CD nozzle with suddenly expanded duct using CFD method. CFD Letters, 11 (5). pp. 61-71. ISSN 2180-1363

Pathan, Khizar Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Influence of expansion level on base pressure and reattachment length. CFD Letters, 11 (5). pp. 22-36. ISSN 2180-1363

Khan, Sher Afghan and Aabid, Abdul and Mokashi, Imran and Al-Robaian, Abdul Rehman Abdullah and Alsagri, Ali Sulaiman (2019) Optimization of two-dimensional wedge flow field at supersonic Mach number. CFD Letters, 11 (5). pp. 80-97. ISSN 2180-1363

S, Parashurama and Saleel, C. Ahmed and M. S., Govindegowda and Khan, Sher Afghan (2019) Hydrocarbons as alternative refrigerants in domestic refrigerators. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3). pp. 496-501. ISSN 2278-3075

Wan Yahya, M.Z. and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Warimani, Mohammad Salman (2019) Modelling of a three-shaft high-bypass-ratio engine performance and emission prediction using hydrogen fuels. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3). pp. 484-490. ISSN 2278-3075

Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) An effect of sweep angle on roll damping derivative for a Delta wing with curved leading edges in unsteady flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9 (2). pp. 361-373. ISSN 2249-6890 E-ISSN 2249-8001

Butt, Mohammad Mursaleen and Ahmad, Sheikh Nazir and Al-Robian, Abdulrehman A and Khan, Sher Afghan (2019) Finite element modeling and analysis of a debonded smart beam in actuation. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 258-263. ISSN 2277-3878

Siddique, Mohd Umair and Khan, Sher Afghan and Al-Robaian, Abdulrahman and Ansari, Eman (2019) Numerical study of heat transfer augmentation using pulse jet impinging on Pin Fin heat sink. CFD letters, 11 (3). pp. 84-91. ISSN 2180-1363

Renita, Sharon Monis and Crasta, Asha and Khan, Sher Afghan (2019) Evaluation of stiffness derivative for a delta wing with straight leading edges in unsteady flow. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 754-762. ISSN 2249 – 8958

Hamizi, Ilya Bashiera and Khan, Sher Afghan (2019) Aerodynamics investigation of delta wing at low Reynold’s number. CFD letters, 11 (2). pp. 32-41. ISSN 2180-1363

Khan, Sher Afghan and Aabid, Abdul and Saleel, Ahamad C. (2019) CFD simulation with analytical and theoretical validation of different flow parameters for the wedge at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 19 (1). pp. 170-177. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Aabid, Abdul and Saleel, Ahmed (2019) Influence of micro jets on the flow development in the enlarged duct at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering, 19 (1). pp. 70-82. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Mohiuddin, M and Saleel, Ahmad C and G M, Fharukh (2019) Investigation of the effects of nozzle exit mach number and nozzle pressure ratio on axisymmetric flow through suddenly expanded nozzles. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3). pp. 570-578. E-ISSN 2249 – 8958

Aabid, Abdul and Khan, Ambareen and Mazlan, Nur Musfira and Ismail, Mohd Azmi and Akhtar, M. Nishat and Khan, Sher Afghan (2019) Numerical simulation of suddenly expanded flow at Mach 2.2. International journal of Engineering & Advanced Technology (IJEAT), 8 (3). pp. 457-462. ISSN 2249-8958

Warimani, Mohammadsalman and Azami, Muhammad Hanafi and Khan, Sher Afghan (2019) Challenges and solutions for using liquid fuels in aviation industry. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2s2). pp. 288-290. ISSN 2249–8958

Khan, Sher Afghan and Alrobaian, Abdul Rahman and Asad Ullah, Mohammed and Khan, Abdul Mohsin (2019) Grooved cavity as a passive controller behind backward facing step. International Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 185-193. ISSN 2289-7879

Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Study of feasibility of pulse detonation engine powered by alternative fuels. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 291-296. ISSN 2249–8958

Khan, Sher Afghan and Alrobaian, Abdul Rahman and Asad Ullah, Mohammed and Rao, Ashwin (2019) Threaded spikes for bluff body base flow control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 194-203. E-ISSN 2289-7879

Rahman, Tariq Md Ridwanur and Asrar, Waqar and Khan, Sher Afghan (2019) An Investigation of RANS simulations for swirl-stabilized isothermal turbulent flow in a gas turbine burner. CFD Letters, 11 (9). pp. 14-31. ISSN 2180-1363 E-ISSN 2180-1363

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Investigation of base pressure variations in internal and external suddenly expanded flows using CFD analysis. CFD Letters, 11 (4). pp. 32-40. ISSN 2180-1363

Mohd Sajali, Muhammad Fahmi and Aabid, Abdul and Khan, Sher Afghan and Mehaboobali, Fharukh Ahmed Ghasi and Sulaeman, Erwin (2019) Numerical investigation of flow field of a non-circular cylinder. CFD Letters, 11 (5). pp. 37-49. ISSN 2180-1363

Umair, Siddiqui and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2019) On numerical investigation of nusselt distribution profile of heat sink using lateral impingement of air jet. CFD Letters, 11 (9). pp. 59-68. ISSN 2180-1363

Mohd Umair, Siddique and Ansari, Emad and Khan, Sher Afghan and Alrobaian, Abdulrahman (2019) On numerical investigation of semi-empirical relation representing development length for a fluid flow in a closed conduit. CFD Letters, 11 (6). pp. 63-71. E-ISSN 2180-1363

Siddique, Mohd Umair and Gulhane, N P and Al-Robaian, Abdul Rehman A and Khan, Sher Afghan (2019) On numerical investigation of semi-empirical relations representing local nusselt number at lower nozzle-target spacing’s. International Journal of Engineering, 32 (1). pp. 137-145. ISSN 1025-2495 E-ISSN 1735-9244

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2018) Study of base pressure behavior in a suddenly expanded duct at supersonic mach number regimes using statistical analysis. Journal of Applied Mathematics and Computational Mechanics, 17 (4). pp. 59-72. ISSN 2299-9965 E-ISSN 2353-0538

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2018) Base pressure behaviour in a suddenly expanded duct at supersonic mach number regimes using Taguchi design of experiments. Mechanics and Mechanical Engineering, 22 (4). pp. 1077-1097. ISSN 1428-1511 E-ISSN 2354-0192

G M, Fharukh Ahmed and Al-Robaian, Abdul Rehman A and Aabid, Abdul and Khan, Sher Afghan (2018) Numerical analysis of convergent-divergent nozzle using finite element method. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6). pp. 373-382. ISSN 2249-6890 E-ISSN 2249-8001

Al-Robaian, Abdul Rehman A and Khan, Sher Afghan and Asad Ullah, Mohammed and G. M., Fharrukh Ahmed and Imtiyaz, A (2018) A new approach to low-cost open-typed subsonic compressible flow wind tunnel for academic purpose. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6). pp. 383-394. ISSN 2249-6890 E-ISSN 2249-8001

Shabana, Ayesha and Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2018) The computation of stiffness derivative for an ogive in the hypersonic flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (5). pp. 173-184. ISSN 2249-6890 E-ISSN 2249-8001

Pathan, Khizer Ahmed and Dabeer, P. S. and Khan, Sher Afghan (2018) Optimization of area ratio and thrust in suddenly expanded flow at supersonic Mach numbers. Case Study in Thermal Engineering, 12. pp. 696-700. ISSN 2214-157X

Khan, Sher Afghan and Ali, Mir Owais and Riyadh, Miah Mohammed and Hossen, Zahid and Arefin, Nafis Mahdi (2018) Assessment of different turbulence models in simulating axisymmetric flow in suddenly expanded nozzles. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 243-248. ISSN 2227-524X

Khan, Ambareen and Abid, Abdul and Khan, Sher Afghan (2018) CFD analysis of convergent-divergent nozzle flow and base pressure control using micro-JETS. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 232-235. ISSN 2227-524X

Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Khan, Sher Afghan (2018) Investigation of base flow for an axisymmetric suddenly expanded nozzle with micro JET. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 236-242. ISSN 2227-524X

Khan, Sher Afghan and Chaudhary, Zakir Ilahi and Shinde, Vilas B. (2018) Base pressure control by supersonic micro jets in a suddenly expanded nozzle. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (4). pp. 101-112. ISSN 2077-124X E-ISSN 2227-2771

Khan, Sher Afghan and Aabid, Abdul and Baig, Maugal Ahmed Ali (2018) Design and fabrication of unmanned arial vehicle for multi-mission tasks. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4). pp. 475-484. ISSN 2249-6890 E-ISSN 2249-8001

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Effect of semi vertex angle on stability derivatives for an oscillating cone for constant value of specific heat ratio. International journal of Engineering & Technology, 7 (3.29). pp. 386-390. ISSN 2227-524X

Salleh, Hafiz and Saharin, Sanisah and Azmi, Mohammad Hanafi and Khan, Sher Afghan (2018) Fluid-structure interactions of variable span wings in low Reynold flows. International Journal of Engineering & Technology, 7 (3.29). pp. 381-385. ISSN 2227-524X

Khan, Sher Afghan and Asad Ullah, Mohammed and G M, Fharukh Ahmed and Jalaluddeen, Ahmed and Baig, Maugal Ahmed Ali (2018) Passive control of base drag in compressible subsonic flow using multiple cavity. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4). pp. 39-44. ISSN 2249-6890 E-ISSN 2249-8001

Pathan, Khizer Ahmed and Dabeer, P S and Khan, Sher Afghan (2018) An investigation to control base pressure in suddenly expanded flows. International Review of Aerospace Engineering (IREASE), 11 (4). pp. 162-169. ISSN 1973-7459 E-ISSN 2533-2279

Asad Ullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Low-cost base drag reduction technique. International Journal of Mechanical Engineering and Robotics Research (IJMERR), 7 (4). pp. 428-432. ISSN 2315-4462

Khan, Sher Afghan and Abid, Abdul and Baig, Maugal Ahmed Ali (2018) CFD analysis of CD nozzle and effect of nozzle pressure ratio on pressure and velocity for suddenly expanded flows. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1147-1157. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Fatehpurwala, M A and Pathan, Khizer Ahmed and Dabeer, P S and Baig, Maugal Ahmed Ali (2018) CFD analysis of human powered submarine to minimize drag. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1057-1066. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Asad Ullah, Mohammed and G M, Fharukh Ahmed and Jalaluddeen, Ahmed and Ali Baig, Maughal Ahmed (2018) Flow control with aero-spike behind bluff body. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1001-1008. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Asadullah, Mohammad and G.M, Fharukh Ahmed. and Jalaluddeen, Ahmed and Baig, Maughal Ahmed Ali (2018) Flow control with aerospike behind bluff body. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1001-1008. ISSN 2249-6890 E-ISSN 2249-8001

Quadros, Jaimon Dennis and Khan, Sher Afghan and A. J., Antony (2018) Modelling of suddenly expanded flow process in supersonic Mach regime using design of experiments and response surface methodology. International Journal of Computational and Applied Mechanics, 49 (1). pp. 149-160. ISSN 2423-6713 E-ISSN 2423-6705

Khan, Sher Afghan and Asad Ullah, Mohammed and Sadiq, Jafar (2018) Passive control of base drag employing dimple in subsonic suddenly expanded flow. International Journal of Mechanical & Mechatronics Engineering, 18 (3). pp. 69-74. ISSN 2227-2771 E-ISSN 2077-124X

Rashid, Mohammed Abdur N. and Khan, Sher Afghan and Muhamad Khairussaleh, Nor Khairusshima and Sarifuddin, Norshahida (2018) Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2930-2934. ISSN 1819-6608

Quadros, Jaimon Dennis and Khan, Sher Afghan and A. J., Antony (2018) Study of effect of flow parameters on base pressure in a suddenly expanded duct at supersonic mach number regimes using CFD and design of experiments. Journal of Applied Fluid Mechanics, 11 (2). pp. 483-496. ISSN 1735-3572 E-ISSN 1735-3645

Sethuraman, Vigneshvaran and Khan, Sher Afghan (2018) Base pressure control using micro-jets in supersonic flow regimes. International Journal of Aviation, Aeronautics, and Aerospace, 5 (1). pp. 1-26. ISSN 2374-6793

Khan, Sher Afghan and Riyadh, MiahMohammed and Ibrahim, Mir Owais Ali and Elrashid, Yousof and Arefin, Nafis Mahdi and Kabir, Shahriar and G M, Fharukh Ahmed (2018) Design & development of a gravity powered fan using gear transmission. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 632-637. ISSN 2227-524X

Mohammed Umair, Siddque and Alrobaian, Abdul Rahman and Khan, Sher Afghan and Gnanagonda Kashinath, Marthande and Rajesh, Patil (2018) Numerical investigation of critical range for the occurrence of secondary peaks in the Nusselt distribution curve. CFD Letters, 10 (2). pp. 1-17. ISSN 2180-1363

Afzal, Asif and Samee, Mohammad and Khan, Sher Afghan (2017) Comparative heat transfer analysis in different mini-channel heat sinks. International Journal of Recent Research Aspects, 4 (4). pp. 41-45. ISSN 2349-7688

Monis, Renita Sharon and Shabana, Ayesha and Crasta, Asha and Khan, Sher Afghan (2017) Computation of stiffness derivative for an unsteady delta wing with curved leading edges. International Journal of Recent Research Aspects .., 4 (4). pp. 69-72. ISSN 2349-7688

Shabana, Ayesha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2017) Estimation of stability derivative of an oscillating cone in hypersonic flow. International Journal of Recent Research Aspectsh, 4 (4). pp. 46-52. ISSN 2349-7688

Shanbhag, Pavithra and Lavanya, S and Khan, Sher Afghan (2017) Estimation of stability derivatives of a wedges at supersonic Mach numbers. International Journal of Recent Research Aspects, 4 (4). pp. 64-68. ISSN 2349-7688

Bashir, Musavir and Khan, Sher Afghan (2017) Investigation on the prominence of abrupt expansion on the base pressure of an axi-symmetric body. International Journal of Recent Research Aspects, 4 (4). pp. 59-63. ISSN 2349-7688

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2017) Predictive modeling of suddenly expanded flow process in the Supersonic Mach number regime using response surface methodology. International Journal of Recent Research Aspects, 4 (4). pp. 53-58. ISSN 2349-7688

Yashodhar, V. and Humrutha, G. and Kaushik, M. and Khan, Sher Afghan (2017) CFD studies on triangular micro-vortex generators in flow control. IOP Conference Series: Materials Science and Engineering, 184 (1). 012007-1. ISSN 1757-8981

Bashir, Musavir and Khan, Sher Afghan and Azam, Qummare and Janvekar, Ayub (2017) Computational and analytical investigation of aerodynamic derivatives of similitude delta wing model at hypersonic speeds. International Journal of Technology, 8 (3). pp. 366-375. ISSN 2086-9614

Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Bashir, Musavir and Khan, Sher Afghan (2017) Experimental investigation on the effectiveness of active control mechanism on base pressure at low supersonic mach numbers. Lecture Notes in Mechanical Engineering, PartF9. pp. 197-209. ISSN 2195-4356 E-ISSN 2195-4364 (In Press)

Asad Ullah, Mohammed and Bashir, Musavir and Janvekar, Ayub and Khan, Sher Afghan (2016) Active control of wall pressure flow field at low supersonic Mach numbers. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 3. pp. 90-98. ISSN 2320-334x E-ISSN 2278-1684

Crasta, Asha and Shabana, Aysha and Monis, Renita and Khan, Sher Afghan (2016) Analysis of variation of stiffness derivative with Mach number and angle of attack for a supersonic flow. IOSR Journal of Mechanical & Civil Engineering, 12 (6). pp. 97-104. ISSN 2320-334x E-ISSN 2278-1684

Ahmed, Khizar Pathan and Dabeer, P.S. and Khan, Sher Afghan (2016) CFD analysis of the supersonic nozzle flow with sudden expansion. IOSR journal of Mechanical & Civil Engineering ( IOSR-JMCE ), 18 (6). pp. 5-7. ISSN 2320-334x E-ISSN 2278-1684

G M, Fharukh Ahmed and Baig, Maugal Ahmed Ali and Bashir, Musavir and Khan, Sher Afghan (2016) Control of ideally expanded and under expanded nozzle flows with micro jets. IOSR journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6). pp. 83-89. ISSN 2320-334x E-ISSN 2278-1684

Bashir, Musavir and Baig, Maughal Ahmed Al and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Control of suddenly expanded flows from correctly expanded and under expanded nozzles at supersonic mach number for area ratio 2.56. IOSR journal of Mechanical & Civil Engineering, 3. pp. 76-82. ISSN 2320-334x E-ISSN 2278-1684

Bashir, Musavir and Azam, Qummare and Khan, Sher Afghan and Baig, Maugal Ahmed Ali (2016) Control of wall pressure flow field with micro jets and control effectiveness. IOSR Journal of Machanical & Civil Engineering, 3. pp. 99-107. ISSN 2320-334x E-ISSN 2278-1684

Shabana, Ayesha and Monis, Renita and Crasta, Asha and Khan, Sher Afghan (2016) Pressure and its derivative with respect to piston Mach number for an oscillating cone. IOSR journal of Mechanical and Civil Engineering ( IOSR-JMCE ), 18 (6). pp. 74-78. ISSN 2320-334X E-ISSN 2278-1684

Afzal, Asif and Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Abdul Rahim, Shebeer (2016) Structural analysis of vee-cap sheet metal component. IOSR journal of Mechanical and Civil Engineering ( IOSR-JMCE), 18 (6). pp. 79-83. ISSN 2320-334x E-ISSN 2278-1684

Monis, Renita Sharon and Shabana, Ayesha and Crasta, Asha and Khan, Sher Afghan (2016) Supersonic flow analysis and evaluation of damping derivative. IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE), 18 (6). pp. 29-36. ISSN 2320-334x E-ISSN 2278-1684

Mohamed Ali, Suliman Mohamed and Faris, Waleed Fekry and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Thermal performance of fined plate mini-channel heat sink. IOSR Journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6). pp. 1-4. ISSN 2320-334x E-ISSN 2278-1684

Pavithra, Shanbhag, and Bashir, Musavir and S, Lavanya and Khan, Sher Afghan (2016) Estimation of stability derivatives in pitch for an oscillating 2-D wedge in supersonic Flow. Advances and Applications in Fluid Mechanics, 19 (4). pp. 873-882. ISSN 0973-4686

Shanbhag, Pavithra and Lavanya, S and Khan, Sher Afghan and Crasta, Asha (2016) Estimation of aerodynamic derivatives in pitch of a wedge in hypersonic flow. Indian Journal of Science and Technology, 9 (34). pp. 1-4. ISSN 0974-6846 E-ISSN 0974-5645

Fharukh, G M and Asad Ullah, M and Khan, Sher Afghan (2016) Exprimental study suddenly expanded flow from correctly expanded nozzles. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 10041-10047. ISSN 1819-6608

Crasta, Asha and Khan, Sher Afghan (2016) Effect of aspect ratio with roll moment derivative of a delta wing in supersonic flow. International Journal of Advances in Engineering Research (IJAER), 12 (1). pp. 10-15. ISSN 2454-1796 E-ISSN 2231-5152

Khan, Sher Afghan and Bashir, Musavir and G M, Fharukh Ahmed and Ullah, M. Asad (2016) An investigation of base flow control by wall pressure analysis in a suddenly expansion nozzle. Journal of Scientific Research and Development, 3 (5). pp. 1-6. ISSN 1115-7569

Sethuraman, Vigneshvaran and Khan, Sher Afghan (2016) Effect of sudden expansion for varied area ratios at subsonic and sonic flow regimes. International Journal of Energy, Environment, and Economics, 24 (1). pp. 99-111. ISSN 1054-853X

Crasta, Asha and Pavithra, S and Khan, Sher Afghan (2016) Estimation of surface pressure distribution on a delta wing with curved leading edges in hypersonic/supersonic flow. International Journal of Energy, Environment, and Economics, 24 (1). pp. 67-73. ISSN 1054-853X

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J and S.Vas, Jolene (2016) Experimental and numerical studies on flow from axisymmetric nozzle flow with sudden expansion for mach 3.0 using CFD. International Journal of Energy, Environment, and Economics, 24 (1). pp. 87-97. ISSN 1054-853X

Chaudhary, Zakir Ilahi and Shinde, V.B and Bashir, Musavir and Khan, Sher Afghan (2016) Experimental studies of the base flow from the nozzles with sudden expansion with micro jets. International Journal of Energy, Environment, and Economics, 24 (1). pp. 59-66. ISSN 1054-853X

Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Bashir, Musavir and Khan, Sher Afghan (2015) Experimental investigation of the base flow from the nozzles with sudden expansion. International Journal of Applied Engineering Research (IJAER), 10 (92-spc). pp. 208-211. ISSN 0973-4562 E-ISSN 0973-9769

Chaudhury, Zakir Ilahi and Shinde, V.B and Syed, Syed Ashfaq and Khan, Sher Afghan (2015) Control of suddenly expanded flow at low supersonic Mach numbers. International Journal of Engineering Research and Applications, 5 (8). pp. 24-33. ISSN 2248-9622.

Chaudhary, Zakir Ilahi and Vilas B., Shinde and Khan, Sher Afghan (2015) Effectiveness of micro-jets at different level of expansion. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE, 12 (4). pp. 29-34. ISSN 2278-3008 (O), 2319-7676 (P)

Crasta, Asha and Khan, Sher Afghan (2015) Effect of angle of attack on damping derivatives of delta wing with full sine wave curved leading edge. International Journal of Emerging trends in Engineering and Development (IJETED), 5 (1). pp. 237-245. ISSN 2249-6149

Crasta, Asha and Khan, Sher Afghan (2015) Effect of aspect ratio with angle of attack of an oscillating hypersonic delta wing with straight leading edges. Mathematical Sciences International Research Journal, 4 (2). pp. 28-33. ISSN 2278-8697

Crasta, Asha and Khan, Sher Afghan (2014) Effect of angle of attack on stiffness derivative of an oscillating supersonic delta wing with curved leading edges. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (6vIII). pp. 12-25. ISSN 2320-334X E-ISSN 2278-1684

Crasta, Asha and Khan, Sher Afghan (2014) Effect of angle of incidence on stability derivatives of a wing. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 2 (V). pp. 411-422. ISSN 2321-9653

Crasta, Asha and Khan, Sher Afghan (2014) Effect of angle of incidence on roll damping derivatives of a delta wing. International Journal of Emerging trends in Engineering and Development (IJETED), 4 (2). pp. 343-356. ISSN 2249-6149

Crasta, Asha and Khan, Sher Afghan (2014) Effect of mach number on stiffness and damping derivatives for oscillating hyersonic non-planar wedge. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (2vVIII). pp. 4-11. ISSN 2320-334X E-ISSN 2278-1684

Ashfaq, Syed and Khan, Sher Afghan (2014) Effect of mach number on wall pressure flow field for area ratio 2.56. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (2). pp. 56-64. ISSN 2320-334X E-ISSN 2278-1684

Crasta, Asha and Khan, Sher Afghan (2014) Estimation of stability derivatives for a planar wedge in the newtonian limit. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE, 10 (2 ). pp. 1-6. ISSN 2278-3008 (O), 2319-7676 (P)

Ashfaq, Syed and Khan, Sher Afghan (2014) Experimental investigation of flow through convergent nozzle and the influence of micro jets on the enlarged duct flow field. IPASJ International Journal of Mechanical Engineering (IIJME ), 2 (3). pp. 7-14. ISSN 2321-6441

Ashfaq, Syed and Khan, Sher Afghan (2014) Studies on wall pressure of sonic flow through the converging nozzles for different area ratios. International Journal of Emerging Trends in Science and Technology, 4 (2). pp. 125-137. ISSN 2278-6856

Crasta, Asha and Khan, Sher Afghan (2014) Supersonic similitude for oscillating non-planar wedge. IOSR Journal of Mathematics (IOSR-JM), 10 (2vVI). pp. 15-24. ISSN 2319-7676 E-ISSN 2278-3008

Crasta, Asha and Khan, Sher Afghan (2014) Hypersonic similitude for planar wedges. International Journal of Advanced Research in Engineering and Technology (IJARET), 5 (2). pp. 16-31. ISSN 0976-6480 E-ISSN 0976-6499

Ashfaq, Syed and Khan, Sher Afghan (2014) Influence of micro jets on wall pressure for area ratio 3.24. International Journal of Emerging Technology and Advanced Engineering (IJETAE), 4 (2). pp. 872-880. ISSN 2250-2459

Ashfaq, Syed and Khan, Sher Afghan (2014) The effect of micro jets on wall pressure for sonic under expanded flow. International Journal of Engineering Research and Application, 4 (3). pp. 32-38. ISSN 2248-9622

Ashfaq, Syed and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2014) Control of base pressure with micro jets for area ratio 2.4. International Review of Mechanical Engineering, 8 (1). pp. 1-10. ISSN 1970-8734 E-ISSN 1970-8742

Ashfaq, Syed and Khan, Sher Afghan (2014) Experimental studies on low speed converging nozzle flow with sudden expansion. International Journal of Emerging Technology and Advanced Engineering (IJETAE), 4 (1). pp. 532-540. ISSN 2250-2459

Ashfaq, Syed and Khan, Sher Afghan (2014) Studies on flow from converging nozzle and the effect of nozzle pressure ratio for area ratio of 6.25. International Journal of Engineering Science & Advanced Technology, 4 (1). pp. 49-60. ISSN 2250-3676

Ashfaq, Syed and Khan, Sher Afghan (2014) Studies on wall pressure flow control by micro jets for high area ratio. International Journal of Advanced Scientific and Technical Research, 4 (1). pp. 664-672. ISSN 2249-9954

Syed, Syed Ashfaq and Khan, Sher Afghan and E., Rathakrishnan (2013) Control of suddenly expanded flow for area ratio 3.61. International Journal of Advanced Scientific and Technical Research (IJAST, 6 (3). pp. 1-11. ISSN 2249-9954

Crasta, Asha and Khan, Sher Afghan (2013) Stabilty derivatives in the newtonian limit. International Journal of Advanced Research in Engineering & Technology (IJARET), 4 (7). pp. 276-289. ISSN 0976-6480

Syed, Syed Ashfaq and Khan, Sher Afghan (2013) Sonic Under Expanded Flow Control With Micro Jets. International Journal of Engineering Research and Application, 3 (6). pp. 1482-1488. ISSN 2248-9622

Crasta, Asha and Khan, Sher Afghan (2013) Stability derivatives of a delta wing with straight leading edge in the Newtonian limit. International Journal of Engineering Research and Application, 4 (2). pp. 1482-1488. ISSN 2248-9622

Ashfaq, Syed and Khan, Sher Afghan (2013) Studies on flow from convergent nozzle with sudden expansion and control effectiveness under the influence of micro jets. International Journal of Research in Mechanical Engineering & Technology (IJRMET) , 4 (1). pp. 76-87. ISSN 2249-5770 E-ISSN 2249-5762

Ashfaq, Syed and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2013) Active control of flow through the nozzles at sonic Mach number. International Journal of Emerging trends in Engineering and Development (IJETED), 2 (3). pp. 73-80. ISSN 2249-6149

FB, Sayyad and B., Kumar and Khan, Sher Afghan (2013) Approximate analytical method for damage detection in free–free beam by measurement of axial vibrations. International Journal of Damage Mechanics, 22 (1). pp. 133-142. ISSN 1530-7921

Crasta, Asha and Khan, Sher Afghan (2012) High incidence supersonic similitude for planar wedge. International Journal of Engineering Research and Application, 2 (5). pp. 468-471. ISSN 2248-9622

Crasta, Asha and Baig, Maugal Ahmed Ali and Khan, Sher Afghan (2012) Estimation of stability derivatives of a delta wing in hypersonic flow. International Journal of Emerging trends in Engineering and Development (IJETED), 6 (2). pp. 505-516. ISSN 2249-6149

Crasta, Asha and Khan, Sher Afghan (2012) Estimation of stability derivatives of an oscillating hypersonic delta wings with curved leading edges. International Journal of Mechanical Engineering & Technology, 3 (3). pp. 483-492. ISSN 0976-6359

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Experimental investigations on wall pressure in suddenly enlarged ducts at supersonic Mach number regimes. International Journal of Emerging Trends in Engineering and Development (IJETED), 6 (2). pp. 496-504. ISSN 2249-6149

Crasta, Asha and Khan, Sher Afghan (2012) Oscillating supersonic delta wing with straight leading edges. International Journal of Computational Engineering Research,, 2 (5). pp. 1226-1233. ISSN 2250-3005

Crasta, Asha and Khan, Sher Afghan (2012) Oscillating supersonic delta wings with straight leading edges. International Journal of Computational Engineering Research,, 2 (5). pp. 12028-12035. ISSN 2250-3005

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Wall pressure studies in a suddenly expanded flow for area ratio 2.56”. International Journal of Engineering Research and Application, 2 (5). pp. 1566-1573. ISSN 2248-9622

Ali Baig, Maughal Ahmed and Khan, Sher Afghan and C., Ahmed Saleel and Rathakrishnan, Ethirajan (2012) Control of base flows with micro jet for area ratio of 6.25. ARPN Journal of Engineering and Applied Sciences, 7 (8). pp. 992-1102. ISSN 1819-6608

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Effect on base pressure in suddenly expanded flows with variable location of microjets. International Journal of Current Research and Review (IJCRR), 4 (16). pp. 1-8. ISSN 2231-2196 E-ISSN 0975-5241

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Studies on suddenly expanded flow at different levels of over expansion for area ratio 3.24. International Journal of Scientific & Engineering Research, 3 (8). pp. 1-6. ISSN 2229-5518

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Control of nozzle flow in a suddenly expanded duct with micro jets. International Journal of Engineeing Science and Advance Technology (IJESAT), 2 (4). pp. 789-795. ISSN 2250-3676

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Effect of mach number in a suddenly expanded flow for area ratio 4.84. International Journal of Engineering Research and Application, 2 (4). pp. 593-599. ISSN 2248-9622

Baig, Maughal Ahmed Al and Khan, Sher Afghan and Rathakrishnan, E. (2012) Base pressure studies from over expanded nozzle for area ratio 2.56. International Journal of Current Research and Review, 4 (11). pp. 107-112. ISSN 2231-2196 E-ISSN 0975-5241

Ali Baig, Maughal Ahmed and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2012) Active control of base pressure in suddenly expanded flow for area ratio 4.84. International Journal of Engineering Science and Technology (IJEST), 4 (5). pp. 1885-1895. ISSN 2278-9510 E-ISSN 0975-5462

Mafeed, M. P. and M., Salman Ali and C., Prabin and Ramis, M. K. and Ali Baig, M. A. and Khan, Sher Afghan (2012) Optimum length for pin fins used in electronic cooling. Applied Mechanics and Materials, 110/16. pp. 1885-1895. ISSN 1660-9336

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Khan, Mohammad Yunus (2012) Effect of area ratio on base pressure in a suddenly expanded duct for under expanded flow ft mach 1.87. International Journal of Mechanical and Industrial Engineering, 2 (2). pp. 86-90. ISSN 2231-6477

Ahmed Ali Baig, Maughal and Al-Mufadi, Farhad and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2011) Control of base flows with micro jets. International Journal of Turbo & Jet-Engines, 28 (1). pp. 59-69. ISSN 0334-0082 E-ISSN 2191-0332

Khan, Sher Afghan and Crasta , Asha (2010) Oscillating supersonic delta wings with curved leading edges. Advanced Studies in Contemporary Mathematics, 20 (3). pp. 359-372. ISSN 1229-3067

Rehman, Shafiqur and Khan, Sher Afghan (2008) Control of base pressure with micro jets:part-I. Aircraft Engineering and Aerospace Technology, 80 (2). pp. 158-164. ISSN 0002-2667

Khan, Sher Afghan and Rathakrishnan, E. (2006) Nozzle expansion level effect on a suddenly expanded flow. International Journal of Turbo & Jet-Engines, 23 (4). pp. 233-257. ISSN 0334-0082 E-ISSN 2191-0332

Khan, Sher Afghan and Rathakrishnan, E. (2006) Active control of base pressure in supersonic regime. Journal of Aerospace Engineering, Institution of Engineers, India, 87 (5). pp. 1-8. ISSN 0257-3423

Khan, Sher Afghan and Rathakrishnan, E. (2006) Control of suddenly expanded flow. Aircraft Engineering and Aerospace Technology, 78 (4). pp. 293-309. ISSN 0002-2667

Khan, Sher Afghan and Rathakrishnan, E. (2004) Active control of suddenly expanded flow from under expanded nozzles. International Journal of Turbo & Jet-Engines, 21 (4). pp. 233-253. ISSN 0334-0082 E-ISSN 2191-0332

Khan, Sher Afghan and Rathakrishnan, E. (2004) Control of suddenly expanded flow from correctly expanded nozzles. International Journal of Turbo & Jet-Engines, 21 (4). pp. 255-278. ISSN 0334-0082 E-ISSN 2191-0332

Khan, Sher Afghan and Rathakrishnan, E. (2003) Control of suddenly expanded flows with micro-jets. International Journal of Turbo & Jet-Engines, 20 (1). pp. 63-81. ISSN 0334-0082 E-ISSN 2191-0332

Ghosh, K and Murthy, M and Khan, Sher Afghan and Pandey, P K (1990) Pitch and roll derivatives of a delta wing with curved leading edge in high speed flow. Aeronautical Society of India, 42 (4). pp. 299-302. ISSN 0972-950X

Book Chapter

Fiqri, Muhammad Ikhwan and Ahmed Pathan, Khizer and Khan, Sher Afghan (2024) Control of suddenly expanded flow with cavity at sonic Mach number. In: Advances in Heat Transfer and Fluid Dynamics. Select Proceedings of AHTFD 2022 . Springer, pp. 1-425. ISBN 978-981-99-7212-8

Proceeding Paper

Shabana, Ayesha and Bayar, Anitha Dayanand and Crasta, Asha and Khan, Sher Afghan and Baig, Maughal Ahmed Ali and Reddy, Voggu Kesava (2023) Evaluation of stability derivatives of an Ogive in a Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Rajan, Mohan Sundar and Weldcherkos, Tilahun and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Reddy, Chamakura Abhinav (2023) Integration of IOT and control systems for industry 4.0 applications. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Crasta, Asha and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Reddy, Chamakura Abhinav (2023) Stiffness derivative for a non-planar wedge in Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Khan, Sher Afghan and Chaudhary, Zakir Ilahi and Baig, Maughal Ahmed Ali and Ridwan, R and Chethan, K.M. and Faheem, Mohammed (2022) Experiments on wall pressure at an area ratio 4.84 in a suddenly expanded flow field at supersonic Mach numbers. In: 2nd International Conference on Advanced Research In Mechanical Engineering (2nd ICARME – 21), 29-30 April 2021, Bangalore, India.

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 1st International Conference on Material Processing and Technology (ICMProTech 2021), Virtual.

Abdul Aabid, Azmil Afifi and Khan, Sher Afghan (2021) Numerical investigation of splitter plate effect on the bluff body using finite volume method. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME), 22-23 December 2020, Nitte, India.

Talikoti, Mohammed Aqeel and Kittur, Md Ibrahim and Reddy, Avala Raji and Baig, Maughal Ahmed Al and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Influence of high and subsequent low-temperature artificial aging on exfoliation corrosion of AA2024. In: International Conference on Technology Innovation in Mechanical Engineering, TIME 2021, 22-23 April 2021, Virtual.

Kittur, Mohammad Yaseen and Kittur, Md Ibrahim and Reddy, Avala Raji and Baig, Maughal Ahmed Ali and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Mechanical response of aluminum 7075 with heat treatment and exfoliation corrosion. In: International Conference on Technology Innovation in Mechanical Engineering, TIME 2021, 22-23 April 2021, Virtual.

Khan, Sher Afghan and Baig, Maughal Ahmed Ali and Ridwan, R and Rayid, Muneer and Suheel, J I and Faheem, Mohammed (2021) Benefit of Mach number and expansion level on the flow development in a cylindrical tube diameter of 18 mm. In: 2021 International Conference on Technology Innovation in Mechanical Engineering, TIME 2021, 22 - 23 April 2021, Bhopal.

Khan, Sher Afghan and Ibrahim, Omar Mohamed and Aabid, Abdul (2021) CFD analysis of compressible flows in a convergent-divergent nozzle. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME), 22-23 December 2020, Nitte, India.

Faheem, Mohammed and Ridwan, R and Muneer, Rayid and Aneeque, Mohammed and Khan, Sher Afghan (2021) Effect of expansion level on the flow development with sudden expansion at high Mach numbers. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020, Nitte, Karnataka, India.

Faheem, Mohammed and Ridwan, R and Rayid, Muneer and Delvi, Hamza Afser and Khan, Sher Afghan (2021) Impact of expansion level on flowfield with sudden expansion at supersonic regimes. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, 22 - 23 December 2020, Nitte, India.

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Mohammed Sapardi, Mohd Azan (2021) Estimation of Mach numbers in supersonic jets using schlieren images. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020, Nitte, Karnataka, India.

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Mohd Azan Mohammed (2021) Experimental study of midplane jet evolution in multiple jets at Mach 2.0. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020, 22-23 December 2020, Nitte, India.

Faheem, Mohammed and Rayid, Muneer and Avvad, Mohammad and Aneeque, Mohammad and Khan, Sher Afghan (2021) Influence of microjets on flow development for diameter ratio of 1.6 for correctly expanded nozzles. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME), 22-23 December 2020, Nitte, India.

Delvi, Hamza Afser and Ridwan, R and Muneer, Rayid and Faheem, Mohammed and Khan, Sher Afghan (2021) Influence of microjets on flow development at supersonic mach numbers with sudden expansion. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020), 10th-11th December 2020, Hyderabad, India.

Aabid, Abdul and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Reddy, Avala Raji (2021) Investigation of flow growth in a duct flows for higher area ratio. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020), 10th -11th December 2020, Hyderabad, India.

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 3rd International Conference on Green Engineering & Technology 2021 (IConGETech), 4th February 2021, Virtual conference. (Unpublished)

Aabid, Abdul and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Rao, K Srinivasa (2021) Effect of control on the duct flow at high mach numbers. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020), 10th -11th December 2020, Hyderabad, India.

Akhtar, Mohammad Nishat and Khan, Sher Afghan and Mohamed, Mazlan and Janvekar, Ayub (2020) Automated image analysis and improvisations to manage palm oil plantation. In: 3rd Tarumanagara International Conference of the Applications of Technology and Engineering (TICATE), 3-4 August 2020, Jakarta, Indonesia.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2020) Position of static cylinder effect on base flows. In: 1st International Conference on Data Science, Machine Learning and Applications, 2019, 29th - 30th March 2019, Hyderabad, India.

Warimani, Mahammad Salaman and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Investigation of aircraft engine performance utilizing various alternative fuels. In: Southeast Asia Workshop on Aerospace Engineering (SAWAE 2019), 29 - 30 Aug 2019, Kuala Lumpur.

Asadullah, Mohammed and Khan, Sher Afghan and Soudagar, Manzoore Elahi M and T. R., Vaishak (2019) A comparison of the effect of single and multiple cavities on base flows. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018, 22nd-23rd Nov. 2018, Bangkok, Thailand.

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Khan, Sher Afghan and Pradeep, Aksatha (2019) The effect of replacement of natural sand by manufactured sand on the properties of the concrete. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018, 22nd-23rd Nov. 2018, Bangkok, Thailand.

Ahmed, Fharrukh and Khan, Sher Afghan (2018) Investigation of efficacy of low length-to-diameter ratio and nozzle pressure ratio on base pressure in an abruptly expanded flow. In: 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, 6 - 7 April 2018, Chennai, Tamilnadu; India.

Aabid, Abdul and Khan, Sher Afghan (2018) Design and fabrication of flying saucer utilizing coanda effect. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Estimation of stability derivatives in newtonian limit for oscillating cone. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21-22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Aabid, Abdul and Khan, Sher Afghan (2018) Optimization of heat transfer on thermal barrier coated gas turbine blade. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 -22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Computation of stability derivatives of an oscillating cone for specific heat ratio = 1.66. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang.

Shanbhag, Pavitra and S., Lavanya and Khan, Sher Afghan (2018) Stability derivatives of a oscillating wedges in viscous hypersonic flow. In: 1st International Conference on Aerospace and Mechanical Engineering (AeroMech 2017), 21st-22nd Nov. 2017, Pulau Pinang.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar (2018) Active control of base pressure with counter clockwise rotating cylinder at Mach 2. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Bashir, Musavir and Rajendran, Parvathy and Khan, Sher Afghan (2018) Energy harvesting from aerodynamic instabilities: Current prospect and future trends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Counter clockwise rotation of cylinder with variable position to control base flows. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Saleel, Ahmed and Baig, Maughal Ahmed Ali and Khan, Sher Afghan (2018) Experimental investigation of the base flow and base pressure of sudden expansion nozzle. In: International Conference on Aerospace and Mechanical Engineering (AeroMech17), 21st-22nd November 2017, Batu Ferringhi, Penang.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Passive control of base pressure with static cylinder at supersonic flow. In: 1st International Conference on Aerospace and Mechanical Engineering (AeroMech 2017), 21st-22nd Nov. 2017, Pulau Pinang.

Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P S (2017) CFD analysis of effect of Mach number, area ratio and nozzle pressure ratio on velocity for suddenly expanded flows. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 Apr 2017, Pune, Maharashtra, India.

Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P S (2017) CFD analysis of effect of area ratio on suddenly expanded flows. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 Apr 2017, Pune, Maharashtra, India.

Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P. S. (2017) CFD analysis of effect of flow and geometry parameters on thrust force created by flow from nozzle. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 April 2017, Pune, Maharashtra, India.

Bashir, Musavir and Khan, Sher Afghan and Udayagiri, Leelanadh and Noor, Asim (2017) Dynamic stability of unguided projectile with 6- DOF trajectory modeling. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 April 2017, Pune, Maharashtra, India.

Khan, Sher Afghan and Thakur, Mohammed Asadullah (2017) Estimation of stability derivatives in pitch for an oscillating wedge in hypersonic flow. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2017) Investigation of effect of process parameters on suddenly expanded flows through an axi-symmetric nozzle for different Mach numbers using design of experiments. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Shanbhag, Pavitra and Lavanya , S and Khan, Sher Afghan and Crasta, Asha (2016) Estimation of aerodynamic derivatives in pitch of a wedge in hypersonic flow. In: 2nd International Conference on Design, Analysis, Manufacturing & Simulation, 7th-8th April 2016, Chennai, India. (Unpublished)

Khan, Sher Afghan and G M, Fharukh Ahmed (2016) Experimental study of suddenly expanded flow from correctly expanded nozzles. In: 2nd International Conference on Design, Analysis, Manufacturing & Simulation, 7th-8th April 2016, Chennai, India.

Sethuraman, Vigneshvaran and Thong, Kenny Tan Boon and Khan, Sher Afghan (2016) Effect of sudden expansion for varied area ratios at subsonic and sonic flow regimes. In: International Conference on Energy Systems and Developments (ICESD2016), 19th-20th Feb. 2016, Pune, India.

Quadros, Jaimon Dennis and Khan, Sher Afghan and A. J., Antony and Vas, Jolene S. (2016) Experimental and numerical studies on flow from axisymmetric nozzle flow with sudden expansion for Mach 3.0 using CFD. In: International Conference on Energy Systems and Developments (ICESD2016), 19th-20th Feb. 2016, Pune, India.

Khan, Sher Afghan (2015) Influence of low length-to-diameter ratio and nozzle pressure ratio in an abruptly expanded flow. In: International Conference on Mechanical Engineering And Advanced Material (ICME-AM) 2015, 3rd-4th Dec. 2015, Kota Kinabalu, Sabah.

Bashir, Musavir and Khan, Sher Afghan and Rajendran, Parvathy (2015) Combined effect of nozzle pressure ratio and screech prone supersonic mach number in a suddenly expanded flow. In: International Conference on Mechanical Engineering And Advanced Material (ICME-AM) 2015, 3rd-4th Dec. 2015, Kota Kinabalu, Sabah.

Chaudhary, Zakir Ilahi and Shinde, V.B and Ashfaq, Syed and Khan, Sher Afghan (2015) Effect of level of expansion and inertia level in a suddenly expanded flow. In: International Conference on Mechanical Engineering & Advanced Material (ICME-AM2015), 3rd-4th Dec. 2015, Kota Kinabalu, Sabah.

Khan, Sher Afghan and Sellappan, Rathakrishnan (2000) Active control of suddenly expanded flow. In: 22nd International Symposium on Space Technology and Science (iSTS), 28th May-4th June 2000, Morioka, Japan.

This list was generated on Fri Mar 29 21:44:37 2024 +08.