Items where Author is "Ali, Fathilah"

Article

Johari, Maizatul Akmal and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza and Hasham, Rosnani (2024) Microencapsulation of Acalypha indica Linn. Extracts using chitosan-polycaprolactone blends. Pertanika Journal of Science & Technology, 32 (2). pp. 741-760. ISSN 0128-7680 E-ISSN 2231-8526

Murugaya, Kartigesan and Misdan, Nurasyikin and Awang, Nuha and Ling, How Hua and Madon, Rais Hanizam and Hairom, Nur Hanis Hayati and Razali, Nor Faizah and Yusof, Norhaniza and Jaafar, Juhana and Md Nordin, Nik Abdul Hadi and Ali, Fathilah (2024) Preparation and characterizations of triptycene integrated poly (arylene ether sulfone) based block and random copolymers. International Journal of Engineering Trends and Technology, 72 (2). pp. 133-141. ISSN 2231–5381

Ali, Fathilah and Jami, Mohammed Saedi and Nik Abdul Ghani, Nik Rashida (2024) Investigation of enhanced electrocoagulation-membrane process for water reclamation from palm oil mill effluents. IIUM Engineering Journal,, 25 (1). (In Press)

Mohd Nasir, Najaa Fadhilah and Hasham, Rosnani and Sabtu, Rahimah and Ali, Fathilah and Adrus, Nadia and Jamaluddin, Jamarosliza and Abdul Rahman, Roshanida and Abdul Hamid, Mariani and Yaakob, Harisun (2023) Characterization and stability assessment of Ocimum gratissimum leaves extract loaded nanostructured lipid carrier. Environment Quality Management, 33 (3). pp. 361-369. ISSN 1088-1913 E-ISSN 1520-6483

Mohan, Raja and Ali, Fathilah (2023) The future of energy harvesting: a brief review of MXenes-based triboelectric nanogenerators. Polymers for Advanced Technologies, 34 (10). pp. 3193-3209. ISSN 1042-7147 E-ISSN 1099-1581 (In Press)

Kharuddin, Anis Athirah and Hasham, Rosnani and Ali, Fathilah and Adrus, Nadia and Jamaluddin, Jamarosliza and Abdul Rahman, Roshanida and Abdul Hamid, Mariani and Yaakob, Harisun (2023) Potential use of phytochemical extract as prebiotic compounds - a brief review. Journal of Materials in Life Sciences, 2 (1). pp. 82-87. E-ISSN 2976-3185

Hazmi, Alia Tasnim and Ahmad, Farah and Mohd Hatta, Maziati Akmal and Md Ralib @ Md Raghib, Aliza 'Aini and Ali, Fathilah (2023) Fungal chitosan for potential application in piezoelectric energy harvesting: review on experimental procedure of chitosan extraction. Alexandria Engineering Journal, 67. pp. 105-116. ISSN 1110-0168

Al-Daas, Aseel and Azmi, Azlin Suhaida and Ali, Fathilah and Anuar, Hazleen (2023) The effect of alkaline treatment to pseudo-stem banana fibers on the performance of polylactic acid/ banana fiber composite. Journal of Natural Fibers, 20 (1). pp. 1-13. ISSN 1544-0478 E-ISSN 1544-046X

Nageib, Adilah Mohamed and Halim, Amanatuzzakiah Abdul and Nordin, Anis Nurashikin and Ali, Fathilah (2023) Recent applications of molecularly imprinted polymers (MIPs) on screen-printed electrodes for pesticide detection. Journal of Electrochemical Science and Technology, 14 (1). pp. 1-14. ISSN 2093-8551 E-ISSN 2288-9221

Ahmad, Mohd Shahrulnizam and Rasit Ali, Roshafima and Mohamad, Zurina and Ahmad Tarmizi, Zatil Izzah and Ghazali, Siti Khairunisah and Munthoub, Dayangku Intan and A. Majid, Rohah and Ali, Fathilah and Hasham, Rosnani and Nazree, Anne Aleesa (2023) Fabrication of starch-based packaging materials. Physical Sciences Reviews. E-ISSN 2365-659X

Mohd Razali, Nur Izzati and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza (2022) Polyurethane: green chemistry synthesis, application and biodegradability - a review. Journal of Polymer Science and Technology, 7 (1). pp. 13-30. ISSN 2550-1917

Nazree, Anne Aleesa and Adrus, Nadia and Ab Muis, Zarina and Hashim, Haslenda and Baharulrazi, Norfhairna and Che Man, Siti Hajjar and Zainal Alam, Muhd Nazrul Hisham and A. Majid, Rohah and Johnson, Edwina and Abdullah, Abdul Razak and Chuprat, Bahrul Razha and Ali, Fathilah and Jamaluddin, Jamarosliza (2022) Mechanical and biodegradation properties of fresh and rotten jicama starches based bioplastics. Environmental Quality Management, 32 (1). pp. 355-364. ISSN 1088-1913 E-ISSN 1520-6483

Azmi, Azlin Suhaida and Mohd Bakari, Nur Atikah Naqiah and Ali, Fathilah and Mohamad Puad, Noor Illi and Ahmad, Farah (2022) Growth kinetic of Rhizopus sp. immobilised on loofah sponge for whole-cell biocatalyst in different cultivation media. Malaysian Journal of Chemical Engineering and Technology (MJCET), 5 (1). pp. 38-42. E-ISSN 2682-8588

Pairon, Mohammad Shahrizad and Ali, Fathilah and Ahmad, Farah and Anuar, Hazleen and Abdul Rahman, Nurul Amirah and Mirghani, Mohamed Elwathig Saeed and Suhr, Jonghwan and Thomas, Sabu (2022) Review on solvent extraction methods of Lignin from Oil Palm Empty Fruit Bunches (OPEFB). Journal of Natural Fibers. ISSN 1544-0478 E-ISSN 1544-046X (In Press)

Pairon, Mohammad Shahrizad and Abdul Rahman, Nurul Amirah and Ali, Fathilah and Anuar, Hazleen and Suhr, Jonghwan (2022) Characterization of dioxane-based and soda-based extraction of lignin from oil palm empty fruit bunches as reinforcement in polylactic acid bio-composite. Bioresource Technology Reports, 20. ISSN 2589014X

Mohd Rodzi, Syakirah and Azmi, Azlin Suhaida and Ali, Fathilah and Mohamad Puad, Noor Illi (2021) Mapping literature review on fermentation substrates for production of lactic acid by Rhizopus SP. Biological and Natural Resources Engineering Journal, 5 (1). pp. 1-27. E-ISSN 2637-0719

Nugraha, Muhammad Wahyu and Wirzal, Mohd Dzul Hakim and Ali, Fathilah and Roza, Liszulfah and Sambudi, Nonni Soraya (2021) Electrospun polylactic acid/tungsten oxide/amino-functionalized carbon quantum dots (PLA/WO3/N-CQDs) fibers for oil/water separation and photocatalytic decolorization. Journal of Environmental Chemical Engineering, 9 (5). pp. 1-14. ISSN 2213-3437

Aziz, Shujahadeen and Ali, Fathilah and Anuar, Hazleen and Ahamad, Tansir and Kareem, Wrya O. and Brza, Mohamad A. and Kadir, MFZ and Abu Ali, Ola A and Saleh, Dalia and Asnawi, ASFM and Hadi, Jihad M. and Alshehri, Said M (2021) Structural and electrochemical studies of proton conducting biopolymer blend electrolytes based on MC:Dextran for EDLC device application with high energy density. Alexandria Engineering Journal. pp. 1-13. ISSN 1110-0168 E-ISSN 2090-2670 (In Press)

Johari, Maizatul Akmal and Ali, Fathilah and Azmi, Azlin Suhaida and Jamaluddin, Jamarosliza and Hasham, Rosnani (2021) The potential encapsulation of euphorbiaceae plant extracts: a review. Journal of Polymer Science and Technology, 6 (2). pp. 11-19. ISSN 2550-1917

Anuar, Hazleen and Abd Rashid, Siti Munirah Salimah and Mohd Nordin, Nurfarahin and Ali, Fathilah and Buys, Yose Fachmi and Thomas, Sabu and Mohd Nasir, Nur Aimi and Mohd Asri, Syazeven Effatin Azma (2021) Potential of fabrication of durian skin fiber biocomposites for food packaging application through the electricity impact analysis. IIUM Engineering Journal, 22 (2). pp. 294-305. ISSN 1511-788X E-ISSN 2289-7860

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah and Mat Yasin, Nik Mohd Farid and Ngabura, Mohammed (2021) Promising potential of electro-coagulation process for effective treatment of biotreated palm oil mill effluents. Pollution, 7 (3). pp. 617-632. ISSN 2383-451X E-ISSN 2383-4501

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Mohd. Nordin, Nurfarahin and Mohd Asri, Syazeven Effatin Azma and Ali, Fathilah and Suhr, Jonghwan (2021) Mechanical and thermal properties of polylactic acid filled lignin powder biocomposite filaments with epoxidized palm oil for sustainable 3d printing application. Perintis eJournal, 11 (1). pp. 23-39. E-ISSN 2232-0725

Anuar, Hazleen and Brza, Mohamad Ali and Aziz, Shujahadeen B. and Ali, Fathilah and Dannoun, Elham M.A. and Saeed, Salah Raza and Mohammed, Sewara J. and Abdulwahid, Rebar T. (2021) Green coordination chemistry as a novel approach to fabricate polymer:Cd (II)-complex composites: Structural and optical properties. Optical Materials, 116. pp. 1-12. ISSN 0925-3467

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah and Abdulwahid, Rebar T. and Hadi, Jihad M. (2021) Electrochemical impedance spectroscopy as a novel approach to investigate the influence of metal complexes on electrical properties of poly (vinyl alcohol)(PVA) composites. International Journal of Electrochemical Science, 16. pp. 1-21. ISSN 1452-3981

Ghazali, Siti Khairunisah and Adrus, Nadia and A. Majid, Rohah and Ali, Fathilah and Jamaluddin, Jamarosliza (2021) UV-LED as a new emerging tool for curable polyurethane acrylate hydrophobic coating. Polymers, 13 (4). p. 487. ISSN 2073-4360

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Alshehri, Saad M and Ali, Fathilah and Ahamad, Tansir and Hadi, Jihad M. (2021) Characteristics of a Plasticized PVA-Based Polymer Electrolyte Membrane and H+ Conductor for an Electrical Double-Layer Capacitor: Structural, Morphological, and Ion Transport Properties. Membranes, 11 (4). p. 296. ISSN 2077-0375

Pairon, Mohammad Shahrizad and Ali, Fathilah and Anuar, Hazleen (2021) Degradation study of polylactic acid, spirulina, and alginate composites in cosmetic application. Biological And Natural Resources Engineering Journal, 5 (1). pp. 45-52. E-ISSN 2637-0719

Nazree, Anne Aleesa and Adrus, Nadia and Ab Muis, Zarina and Hashim, Haslenda and Baharulrazi, Norfhairna and Che Man, Siti Hajjar and Zainal Alam, Muhd Nazrul Hisham and A. Majid, Rohah and Johnson, Edwina and Abdullah, Abdul Razak and Chuprat, Bahrul Razha and Ali, Fathilah and Jamaluddin, Jamarosliza (2021) Mechanical and biodegradation properties of fresh and rotten jicama starches based bioplastics. Environmental Quality Management. pp. 1-10. ISSN 1520-6483

Ali, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi and Ali, Fathilah and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) Effect of freeze-dried durian skin nanofiber on the physical properties of poly(lactic acid) biocomposites. Polymer Composite. ISSN 0272-8397 E-ISSN 1548-0569 (In Press)

Ali, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah and Dannoun, Elham M.A and Mohammed, Sewara J. and Abdulwahid, Rebar T. and Al-Zangana, Shakhawan (2020) Tea from the drinking to the synthesis of metal complexes and fabrication of PVA based polymer composites with controlled optical band gap. Scientific Reports, 10 (1). pp. 1-17. E-ISSN 2045-2322

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah (2020) Role of electrocoagulation in wastewater treatment: a developmental review. Journal of Water Process Engineering, 37. pp. 1-11. ISSN 2214-7144

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Dannoun, Elham M.A and Ali, Fathilah and Abdulwahid, Rebar T. and Al-Zangana, Shakhawan and Kadir, Mohd F. Z. (2020) The study of EDLC device with high electrochemical performance fabricated from proton ion conducting PVA-based polymer composite electrolytes plasticized with glycerol. Polymers, 12 (9). pp. 1-25. ISSN 2073-4360

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah (2020) Structural, ion transport parameter and electrochemical properties of plasticized polymer composite electrolyte based on PVA: a novel approach to fabricate high performance EDLC devices. Polymer Testing, In press, pre-proof. pp. 1-65. ISSN 0142-9418 (In Press)

Brza, Mohamad A. and Shujahadeen, Aziz and Anuar, Hazleen and Ali, Fathilah and Hamsan, M.H and Kadir, M.F.Z and Abdulwahid, Rebar T. (2020) Metal framework as a novel approach for the fabrication of electric double layer capacitor device with high energy density using plasticized Poly(vinyl alcohol): Ammonium Thiocyanate based Polymer Electrolyte. Arabian Journal of Chemistry, 13 (8). ISSN 1878-5352

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Mohd Nasir, Nur Aimi and Hasham, Rosnani and Hafiz Idris, Mohamad Khairul (2020) Development of biodegradable cosmetic patch using a polylactic acid/phycocyanin–alginate composite. Polymers, 12 (8). pp. 1-11. E-ISSN 2073-4360

Omar, Mohamad Firdaus and Mohamad, Nuriah and Ali, Fathilah (2020) Preparation and characterizations of latex/filler nanocomposites. IIUM Engineering Journal, 21 (2). pp. 230-238. ISSN 1511-788X E-ISSN 2289-7860

Azmi, Azlin Suhaida and Awan, Mohamed Anwar and Amid, Azura and Mohamad Puad, Noor Illi and Ali, Fathilah (2020) Carbon capture and storage with lipid production in integrated system of aqueous ammonia with marine mutant Synechococcus PCC 7002 IIUM01. Biological And Natural Resources Engineering Journal, 3 (1). pp. 14-27. E-ISSN 2637-0719

Mohamad, Nur Lisa Farhana and Ali, Fathilah and Azmi, Azlin Suhaida and Barre, Mohamed Soleiman and Anuar, Hazleen and Jamaluddin, Jamarosliza (2020) Enhanced flexibility of polylactic acid/epoxidized palm oil/pineapple fiber composites. Biological And Natural Resources Engineering Journal, 3 (1). pp. 1-7. E-ISSN 2637-0719

Barre, Mohamed Soleiman and Ali, Fathilah and Mirghani, Mohamed Elwathig Saeed and Nordin, Noor Faizul Hadry and Anuar, Hazleen and Nasir, Nur Aimi (2020) Potential food additive of Boswellia carterii essential oil encapsulated within gum Arabic: a particle size distribution and zeta potential analysis. Food Research, 4 (Supplementary 2). pp. 19-23. E-ISSN 2550-2166

Anuar, Hazleen and Mohd Apandi, Siti Nur E’zzati and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Buys, Yose Fachmi and Manshor, Mohd Romainor and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) The effects of supercritical carbon dioxide on the degradation and antimicrobial properties of PLA biocomposite. IIUM Engineering Journal, 21 (1). pp. 212-227. ISSN 1511-788X E-ISSN 2289-7860

Omar, Mohamad Firdaus and Mohamad, Nuriah and Azmi, Azlin Suhaida and Ali, Fathilah and Anuar, Hazleen and Mohd Nasir, Nur Aimi (2020) Chemical and rheological properties effects from different parameters in horizontal agitator bead mill process on sulfur dispersion. International Journal of Advanced Science and Technology, 29 (9s). pp. 1665-1672. ISSN 2005-4238 E-ISSN 2207-6360

Maskur, Miftahul Hidayat and Wan Nawawi, Wan Mohd Fazli and Ali, Fathilah and Al-Khatib, Maan Fahmi Rashid (2020) Crustacean chitin nanomaterial as reinforcement for bio-based polymer. Advances in Materials and Processing Technologies. pp. 1-12. ISSN 2374068X

Ho, Chit Seng and Zainal Abidin, Nur Hafizah and Nugraha, Muhammad Wahyu and Sambudi, Nonni Soraya and Ali, Fathilah and Wirzal, Mohd Dzul Hakim and Kasmiarno, Laksmi Dewi and Adli, Sarah Amalina (2020) Electrospun porous polylactic acid fibers containing CdS for degradation of methylene blue. Fibers and Polymers, 21 (6). pp. 1212-1221. ISSN 1229-9197 E-ISSN 1875-0052

Omar, Mohamad Firdaus and Mohamad, Nuriah and Azmi, Azlin Suhaida and Ali, Fathilah (2019) Properties of sulphur in colloidal system: a review. Biological and Natural Resources Engineering Journal (BNREJ), 2 (2). pp. 13-20. E-ISSN 2637-0719

Asraf, Nur Heena and Adli, Sarah Amalina and Barre, Mohamed Soleiman and Ali, Fathilah and Anuar, Hazleen (2019) Degradation properties of biodegradable polymers. Journal of Wastes and Biomass Management (JWBM), 1 (2). 05-08. ISSN 2710-6012

Barre, Mohamed Soleiman and Ali, Fathilah and Mirghani, Mohamed Elwathig Saeed and Nordin, Noor Faizul Hadri (2019) Microencapsulated frankincense essential oil: a potential remedy and prevention of mouth diseases. Malaysian Journal of Medicine and Health Science, 15 (Supplement 8). p. 22. ISSN 1675-8544

Ali, Fathilah (2019) Becoming a zero single use plastic nation. Star Online.

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Hasham, Rosnani (2019) Biodegradable polymer composite for cosmetic patch. Biological and Natural Resources Engineering Journal (BNREJ), 2 (2). pp. 49-64. E-ISSN 2637-0719

Azmi, Azlin Suhaida and Shakilla Sani, Fazrizatul and Ali, Fathilah and Mel, Maizirwan (2018) Interactive effect of temperature, pH and light intensity on biodesalination of seawater by Synechococcus sp. PCC 7002 and on the cyanobacteria growth. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (1). pp. 85-93. ISSN 2289-7879

Wan Osmani, Sharifah Nur Aqilah and Ali, Fathilah and Adli, Sarah Amalina (2018) Effect of acid hydrolysis treated pineapple fiber in plasticized polylactic acid composite. Journal of Advanced Research in Materials Science, 50 (1). pp. 14-18. ISSN 2289-7992

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida (2018) Preparation and characterization of PLA/algae nanocomposite for packaging industry. Journal of Advanced Research in Materials Science, 50 (1). pp. 19-25. ISSN 2289-7992

Awale, Raina Jama and Ali, Fathilah and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi and Anuar, Hazleen and Hassan, Azman (2018) Enhanced flexibility of biodegradable polylactic acid/starch blends using epoxidized palm oil as plasticizer. Polymers, 10 (9). pp. 1-12. ISSN 2073-4360

M. A., Siti Nur E’zzati and Anuar, Hazleen and Y.F., Buys and A. R., Siti Munirah Salimah and Ali, Fathilah and M. R., Manshor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042

Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Hassan, Noor Azlina and Mohd Apandi, Siti Nur E'zzati and Ali, Fathilah and Manshhor, Mohd Romainor (2018) Thermal stability of plasticized durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 447-451. ISSN 2581-4311

Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. International Journal of Engineering & Technology, 7 (4014). pp. 339-342. ISSN 2227-524X

Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Buys, Yose Fachmi and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshor, Mohd Romainor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042

Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Abu Bakar, Nur Fatin Izzati and Syed Mustafa, Sharifah Nurul Inani and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah (2018) Physical and functional properties of durian skin fiber biocomposite films filled with natural antimicrobial agents. BioResources, 13 (4). pp. 7255-7269. ISSN 1930-2126

Anuar, Hazleen and Abu Bakar, Nur Fatin Izzati and Syed Mustafa, Sharifah Nurul Inani and Mohd Apandi, Siti Nur E’zzati and Abd Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshir, Mohd. Romainor (2017) Impregnation of cinnamon essential oil into plasticised polylactic acid biocomposite film for active food packaging. Journal of Packaging Technology and Research, 1 (3). pp. 149-156. ISSN 2520-1034 E-ISSN 2520-1042

Ismail, Muhamad Norshafiq and Rafidi, Najihah and Awale, Raina Jama and Ali, Fathilah (2017) Preparation and characterization of polylactic acid based polyurethane for environmental friendly packaging materials. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 38 (1). pp. 16-21. ISSN 2289-7879

Long, JiaJia and Azmi, Azlin Suhaida and Kim, Minsoo and Ali, Fathilah (2017) Comparative study of poly(4-vinylpyridine) and polylactic acid-block-poly(2-vinylpyridine) nanocomposites on structural, morphological and electrochemical properties = Kajian perbandingan nanokomposit poli(4-vinilpiridine) dan polilaktik asid-blok-poli(2-vinilpiridine) ke atas sifat struktur, morfologi dan elektrokimia. Sains Malaysiana, 46 (7). pp. 1097-1102. ISSN 0126-6039

Ali, Fathilah and Long, JiaJia and Wan Salim, Wan Wardatul Amani (2017) Electrochemical characterization of polylactic acid-block-poly (2-vinylpyridine)/gold nanoparticle composites for glucose biosensor development. IIUM Engineering Journal, 18 (2). pp. 34-41. ISSN 1511-788X E-ISSN 2289-7860

Ali, Fathilah and Jama Awale, Raina and Fakhruldin, Hanan and Anuar, Hazleen (2016) Plasticizing poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material = Peningkatan fleksibiliti poli(laktik asid) menggunakan minyak kelapa sawit terepoksi untuk aplikasi pembungkus mesra alam. Malaysian Journal of Analytical Sciences, 20 (5). pp. 1153-1158. ISSN 1394-2506

Mohan, Raja and Subha, J. and Alam, Javed and Ali, Fathilah (2016) Influence of multiwalled carbon nanotubes on biodegradable Poly(lactic acid) nanocomposites for electroactive shape memory actuator. Advances in Polymer Technology. pp. 1-6. E-ISSN 1098-2329 (In Press)

Ali, Fathilah and Awale, Raina Jama and Mirghani, Mohamed Elwathig Saeed and Anuar, Hazleen and Samat, Noorasikin (2016) Preparation and characterization of plasticized polylactic acid/starch blend. Jurnal Teknologi, 78 (11-2). pp. 7-12. E-ISSN 2180–3722

Anuar, Hazleen and Razali, Mohd Syafiq and Saidin, Hafizul Adzim and Badrul Hisham, Ammelia Fazlina and Mohd Apandi, Siti Nur E’zzati and Ali, Fathilah (2016) Tensile properties of durian skin fibre reinforced plasticized polylactic acid biocomposites. International Journal of Materials and Manufacture [IJEMM], 1 (1). pp. 16-20. E-ISSN 0128-1852

Ali, Fathilah and Kang, Dong Jin and Kim, Minsoo P and Cho, Chul-Hee and Kim, Bumjoon J (2014) Synthesis of biodegradable and flexible, polylactic acid based, thermoplastic polyurethane with high gas barrier properties. Polymer International, 63 (6). pp. 1620-1626. ISSN 1097-0126

Ali, Fathilah and Jamaluddin, Jamarosliza and Upadhyay, Arun Kumar (2014) Poly(lactic acid) based flexible films. International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering , 8 (5). pp. 425-428.

Upadhyay, Arun Kumar and ., Vishakha and Ali, Fathilah (2013) Fabrication of hydrogen peroxide biosensor based on thionine blue and carbon nano tube modified glassy carbon electrode. S & T Review: An International Journal of Science & Technology, 2 (2). pp. 63-67. ISSN 2231-5160

Kwon, Taegyun and Kim, Taesu and Ali, Fathilah and Kang, Dong Jin and Yoo, Misang and Bang, Joona and Lee, Wonbo and Kim, Bumjoon J. (2011) Size-controlled polymer-coated nanoparticles as efficient compatibilizers for polymer blends. Macromolecules, 44. pp. 9852-9862. ISSN 1520-5835 (O), 0024-9297 (P)

Ali, Fathilah and Mohan, Raja (2010) Thermal, mechanical, and rheological properties of biodegradable polybutylene succinate/carbon nanotubes nanocomposites. Polymer Composites , 31 (8). pp. 1309-1314. ISSN 1548-0569

Ali, Fathilah and Chang, Young-Wook and Kang, Shin Choon and Yoon, Joon Yong (2009) Thermal, mechanical and rheological properties of poly (lactic acid)/epoxidized soybean oil blends. Polymer Bulletin, 62 (1). pp. 91-98. ISSN 0170-0839

Mohan, Raja and J, Subha and Ali, Fathilah and Ryu, Sung Hun (2008) Synthesis of copper nanoparticles by electroreduction process. Materials and Manufacturing Processes, 23 (8). pp. 782-785. ISSN 1532-2475 (O), 1042-6914 (P)

Book Chapter

Jasni, Ainil Hawa and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi and Ali, Fathilah and Ahmad Nor, Yusilawati (2023) Naturally derived biomaterials: advances and opportunities. In: Engineered Biomaterials: Synthesis and Applications. Engineering Materials . Springer, Singapore, pp. 3-41. ISBN 978-981-99-6697-4

Nordin, N. M. and Anuar, Hazleen and Ali, Fathilah and Buys, Y. F. (2023) Properties of polylactic acid biocomposite foamed treated via supercritical carbon dioxide. In: Springer Proceedings in Materials. Springer Proceedings in Materials, 24 (1). Springer, Singapore, pp. 279-286. ISBN 978-981-99-2014-3

Tahreen, Amina and Adli, Sarah Amalina and Anuar, Hazleen and Jamaluddin, Jamarosliza and Mohan, Raja and Ali, Fathilah (2023) Algae materials for food and food packaging. In: Algae Materials: Applications Benefitting Health. Developments in Applied Microbiology and Biotechnology . Elsevier, United Kingdom, pp. 85-91. ISBN 978-0-443-18816-9

Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza (2020) Characterization of polylactic acid/organoclay nanocomposites. In: Advances in nanotechnology and its applications. Springer, Singapore, pp. 107-114. ISBN 978-981-15-4741-6

Anuar, Hazleen and Ali, Fathilah and Buys, Yose Fachmi and Mohd Apandi, Siti Nur E'zzati and Abd. Rashid, Siti Munirah Salimah and Adli, Sarah Amalina (2019) Sustainable nanocomposites in food packaging. In: Sustainable polymer composites and nanocomposites. Springer Nature Switzerland, Switerland, pp. 413-436. ISBN 978-3-030-05398-7

Ali, Fathilah and Ismail, Norshafiq (2018) Polymerization methods and characterizations for Poly(Lactic Acid) (PLA) based polymers. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 139-150. ISBN 978-981-13-2256-3

Long, Jia Jia and Benoudjit, Abdel Mohsen and Arris, Farrah Aida and Ali, Fathilah and Wan Salim, Wan Wardatul Amani (2018) Polymers in biosensors. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 151-166. ISBN 978-981-13-2256-3

Ali, Fathilah and Anuar, Hazleen and Jamaluddin, Jamarosliza (2018) Structural, thermal, mechanical and rheological properties of polylactic acid/epoxidized soybean oil/organoclay blends. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-8. ISBN 978-0-12-803581-8 (In Press)

Azmi, Azlin Suhaida and Sulaiman, Sarina and Mohamed Azmin, Nor Fadhillah and Ali, Fathilah (2015) Scaling-up recombinant enzyme fermentation. In: Recombinant Enzymes - From Basic Science to Commercialization. Springer International Publishing, Springer International Publishing Switzerland, pp. 99-113. ISBN 978-3-319-12397-4

Proceeding Paper

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2023) Mechanical and thermal properties of 3D printed polylactic acid reinforced alkaline lignin with epoxidized palm oil bio-composites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Manshor, Mohd Romainor and Kamarulzaman, Amjad Fakhri and Anuar, Hazleen and Toha @ Tohara, Siti Fauziah and Ali, Fathilah and Sukindar, Nor Aiman and Suhr, Jonghwan and Haris, Nursyam Dzuha (2023) Optimizing tensile strength of PLA-Lignin Bio-composites using machine learning approaches. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Kherchi, Asma and Ali, Fathilah and Azmi, Azlin Suhaida and Ahmad, Farah and Anuar, Hazleen (2023) Effect of Polylactic Acid (PLA) concentrations on tensile properties for transdermal patch. In: IIUM Engineering Congress 2023 (IEC ’23), 15 – 16 August 2023, IIUM.

Omar, Mohamad Firdaus and Ali, Fathilah and Jami, Mohammed Saedi and Azmi, Azlin Suhaida and Ahmad, Farah and Marzuki, Mohd Zahid (2023) Influence of continuous flow bead-milling process parameters on sulfur curative and its performance for elastomeric rubber composites. In: IIUM Engineering Congress 2023 (IEC ’23), 15 – 16 August 2023, IIUM.

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah and Mohammad, Zahangir Alam (2022) Moringa Oleifera (MO) seed shell based adsorbent synthesis for CO2 capture. In: The 2 nd Euro-Asia Conference on CO2 Capture and Utilisation (EACCO2CU2022), 6-8 December 2022, Kuala Lumpur, Malaysia. (Unpublished)

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah (2021) Activated carbon assisted electrocoagulation process for treating biotreated palm oil mill effluent. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Mirghani, Mohamed Elwathig Saeed and Ali, Fathilah and Anuar, Hazleen and Ahmad, Farah and Suhr, Jongwan (2021) Extraction of lignin from oil palm empty fruit bunches as filler in polylactic acid (PLA) bio-composite for 3D printing application. In: The 1st International Conference of Bioscience and Biorefinery (IC2B) 2021, 13-14 October 2021, 13-14 October 2021, Malaysia. (Unpublished)

Mat Zin, Mizan Izzati and Shamsudin, Nurul Syazana and Ali, Fathilah and Wan Nawawi, Wan Mohd Fazli (2021) Chitin fiber from mushroom as reinforcement for biobased polymer. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah (2021) Activated carbon assisted electrocoagulation process for treating biotreated palm oil mill effluent. In: 6th International Conference on Biotechnology Engineering 2021 (ICBioE 2021), 22-23 June 2021, Kuala Lumpur (Online). (Unpublished)

Johari, Maizatul Akmal and Azmi, Azlin Suhaida and Jamaluddin, Jamarosliza and Hasham, Rosnani and Chee, Chin Fei and Ali, Fathilah (2021) Comparison study between encapsulation of Acalypha indica Linn extracts with Chitosan-PCL and Chitosan-OA. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Mohd Bakari, Nur Atikah Naqiah and Azmi, Azlin Suhaida and Ali, Fathilah and Mohamad Puad, Noor Illi and Ahmad, Farah (2021) Immobilization and morphology of Rhizopus sp. on Loofah Sponge. In: 6th International Conference Biotechnology Engineering 2021, Online, IIUM. (Unpublished)

Mirghani, Mohamed Elwathig Saeed and Ali, Fathilah and Razali, N I M and Ismail, T N M T Ismail and Omar, M Firdaus (2021) Microwave-assisted synthesis of polylactic acid-diol for polyurethane as biodegradable packaging material. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Mohd Razali, Nur Izzati and Ali, Fathilah and Azmi, Azlin Suhaida and Tuan Ismail, Tuan Noor Maznee and Mirghani, Mohamed Elwathig Saeed and Omar, Mohamad Firdaus (2021) Microwave-assisted synthesis of polylactic acidDiol for polyurethane as biodegradable packaging material. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2021) Poly(Lactic) acid reinforced with alkaline Lignin Biocomposites prepared by Thermal Extrusion for sustainable 3D printing process. In: 1st International Conference on Material Processing and Technology 2021 (ICMProTech), 14-15 July 2021, Perlis, Malaysia (Virtual).

Pairon, Mohammad Shahrizad and Ali, Fathilah and Anuar, Hazleen and Ahmad, Farah and Suhr, Jonghwan and Mirghani, Mohamed Elwathig Saeed (2021) Reinforcement of Polylactic acid (PLA) bio-composite with lignin from oil palm empty fruit bunches (OPEFB) for 3D printing application. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Pairon, Mohammad Shahrizad and Ali, Fathilah and Anuar, Hazleen and Ahmad, Farah and Jonghwan, Suhr and Mirghani, Mohamed Elwathig Saeed (2021) Reinforcement of Polylactic acid (PLA) biocomposite with lignin from oil palm empty fruit bunches (OPEFB) for 3D printing application. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah (2020) Electrocoagulation (EC) process to sustainably Treat Palm Oil Mill Effluent (POME) for wastewater reuse. In: Kulliyyah of Engineering Research, Innovation and Commercialization Exhibition (KERICE) 2020, 8th December 2020, Kuala Lumpur.

Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. In: 2nd International Conference on Applied Sciences and Industrial Technology (ICASIT 2018), 14th-15yh November 2018, Melaka. (Unpublished)

Wan Osmani, Sharifah Nur Aqilah and Ali, Fathilah and Adli, Sarah Amalina (2018) Effect of acid hydrolysis treated pineapple fiber in plasticized polylactic acid composite. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida (2018) Preparation and characterization of PLA/algae nanocomposites for packaging industry. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Ibrahim Ali, Noorbatcha and Ahmad Zawawi, Ahmad Fandi and Ali, Fathilah and Jaswir, Irwandi (2016) Production of polylactic acid nanoparticles encapsulating astaxanthin. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur. (Unpublished)

Mustaffa, Nooraidah and Jamal, Parveen and Saheed, Olorunnisola Kola and Kabashi, Nassereldeen A. and Ali, Fathilah and Othman, Rashidi and Redzwan, Ghufran (2016) Bioremediation of polycyclic aromatic hydrocarbons by bacterial strains isolated from petroleum contaminated soil. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Long, JiaJia and Wan Salim, Wan Wardatul Amani and Ali, Fathilah (2016) Electrochemical characterization of polylactic acid-block-poly(2-vinylpyridine)/gold nanoparticle (aunp) composites for glucose biosensor development. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Ismail , Muhamad Norshafiq and Rafidi, Najihah and Ali, Fathilah (2016) Preparation and characterization of polylactic acid based polyurethane for environmental friendly packaging materials. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Ali, Fathilah and Awale, Raina Jama and Mohamad, Nur Lisa Farhana and Ismail, Norshafiq (2016) Sustainable biopolymers for environmental friendly packaging materials. In: Invention, Innovation and Design Exposition (IIDEX) 2016, 20th-23rd September 2016, Shah Alam, Selangor. (Unpublished)

Mohamad, Nur Lisa Farhana and Awale, Raina Jama and Ali, Fathilah (2016) The effect of alkali treated pineapple fibre on the properties of plasticized polylactic acid/epoxy palm oil blend. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Ali, Fathilah and Anuar, Hazleen and Awale, Rania J. (2015) Flexible and biodegradable film for environmental friendly packaging material. In: IIRIE 2015, CAC Gombak.

Ali, Fathilah and Anuar, Hazleen and Fakhruldin, Hanan (2015) Plasticizing Poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material. In: Malaysia Polymer International Conference (MPIC 2015), 10th-11th June 2015, Palm Garden Hotel, IOI Resort, Putrajaya. (Unpublished)

Jame, Raina and Mirghani, Mohamed Elwathig Saeed and Anuar, Hazleen and Samat, Noorasikin and Ali, Fathilah (2015) Preparation and characterization of plasticized Polylactic acid/starch blend. In: 5th International Conference on Advancement in Science and Technology (iCAST 2015), 10th-12th August 2015, Kuantan, Pahang. (Unpublished)

Ali, Fathilah and Upadhyay, Arun Kumar (2014) Preparation of flexible PLA films using novel plasticizers. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Gombak, Kuala Lumpur.

Ali, Fathilah and Kyi, Kyi Tha (2010) Public awareness of benefits of Gingko biloba in memory dysfunction and choice of brands among pharmacists in Alor Star, Kedah & Kuantan, Pahang. In: 3rd International Conference on Advancement in Science and Technology (iCAST) 2010, 27-29 November 2010, Vistana Hotel, Kuantan, Pahang.