Items where Subject is "T Technology > TP Chemical technology > TP200 Manufacture and use of chemicals"

-

-, Sharifah Adzila and Murad, Mardziah C. and Sopyan, Iis (2012) Doping metal into calcium phosphate phase for better performance of bone implant materials. Recent Patents on Materials Science, 5. pp. 18-47. ISSN 1874-4656

A

ANR, Reddy and Saleh, A. A. and Islam, Md. Saiful and Hamdan, S. and Maleque, Md. Abdul (2016) Biodiesel production from crude jatropha oil using a highly active heterogeneous nanocatalyst by optimizing transesterification reaction parameters. Energy & Fuels, 30 (1). pp. 334-343. ISSN 0887-0624 E-ISSN 1520-5029

Abd Samad, Nadiah Syuhada and Amid, Azura (2018) Isolation of halophilic bacteria. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 13-22. ISBN 978-981-13-2256-3

Abdullah, Mohammad Aiman Hakim and Abdul Aziz, Ainul Husna and Engliman, Nurul Sakinah (2024) Comparison study between hydrothermal and coprecipitation method for green synthesize of magnetic silver nanoparticles. Chemical and Natural Resources Engineering Journal (Formally known as Biological and Natural Resources Engineering Journal), 8 (1). pp. 12-27. E-ISSN 2637-0719

Abu Hassan, Nur Hudawiyah and Jami, Mohammed Saedi and Mohd Daud, Farah Diana and Jamal, Nur Ayuni and Nordin, Norhuda Hidayah (2023) Enhancement of fenton process using high entropy alloy powder as catalyst. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur.

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Bello, K.A. (2016) Investigation of parametric influence on the properties of Al6061-SiCp composite. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Gombak.

Adeyemi, Bello K. and Maleque, Md. Abdul and Ahmad, Zuraida and Adebisi, Adetayo A. and Mirdha, S. (2015) Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. In: Malaysian International Tribology Conference 2015, 16th-17th Nov. 2015, Penang, Malaysia.

Ahmad, Abdul Aziz and Mohd. Salleh, Hamzah and Noorbatcha, Ibrahim Ali (2018) Site-directed mutagenesis on plasmid using polymerase chain reaction. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 1-12. ISBN 978-981-13-2256-3

Ahmad Raus, Raha and Ali Salih, Ghassan and Shaban, Mustaffa Nameer (2018) Culturing and maintaining mammalian cell culture. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 215-226. ISBN 978-981-13-2256-3

Ahmad Tarmizi, Nor Hafizah and Jamal, Parveen and Mohamed Ismail, Abdul Karim and Sopyan, Iis (2009) Tio2 powder photocatalyst from sol-gel route and its immobilisation with cement for photocatalytic phenol removal. Journal of the Institution of Engineers, Malaysia, 70 (4). pp. 49-56. ISSN 0126-513X

Al-Daas, Aseel and Azmi, Azlin Suhaida and Ali, Fathilah and Anuar, Hazleen (2023) The effect of alkaline treatment to pseudo-stem banana fibers on the performance of polylactic acid/ banana fiber composite. Journal of Natural Fibers, 20 (1). pp. 1-13. ISSN 1544-0478 E-ISSN 1544-046X

Ali, Fathilah and Ismail, Norshafiq (2018) Polymerization methods and characterizations for Poly(Lactic Acid) (PLA) based polymers. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 139-150. ISBN 978-981-13-2256-3

Amid, Azura and Ab. Shukor, Nurul Aqilah (2018) Thermotolerant bacteria producing fibrinolytic enzyme. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 43-52. ISBN 978-981-13-2256-3

Arifutzzaman, A and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2019) Investigation of extraction yields of exfoliated graphene in deionized water from organic solvents. International Journal of Technology, 10 (6). pp. 1251-1259. ISSN 2086-9614

Arris, Farrah Aida and Benoudjit, Abdel Mohsen and Sanober, Fahmi and Wan Salim, Wan Wardatul Amani (2018) Characterization of electrochemical transducers for biosensor applications. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 119-138. ISBN 978-981-13-2256-3

Asem, Maimunah and Jimat, Dzun Noraini (2018) Antimicrobial properties of composite film based polyvinyl alcohol/starch/nanocellulose from sugarcane bagasse coated with essential oil. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Asem, Maimunah and Jimat, Dzun Noraini and Jafri, Nur Huda Syazwani and Wan Nawawi, Wan Mohd Fazli and Mohamed Azmin, Nor Fadhillah and Abd Wahab, Mohd Firdaus (2023) Entangled cellulose nanofibers produced from sugarcane bagasse viaalkaline treatment, mild acid hydrolysis assisted with ultrasonication. Journal of King Saud University - Engineering Sciences (JKSUES), 35 (1). pp. 24-31. ISSN 1018-3639

Azmi, Azliin Suhaida and Ngoh, Gek Cheng and Mel, Maizirwan (2010) Optimization of Single-step Bioconversion Process using Taguchi’s method for the production of Multiple Valuable Fermentation-products. In: The 13th Asia Pacific Confederation of Chemical Engineering Congress, 5-8 October 2010, Taipei, Taiwan.

B

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and Mirdha, S. (2015) Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique. In: 3rd International Doctoral Student Symposium with Partner Universities, 25-28 February 2015, Hokkaido University, Sapporo, Japan.

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and S. , Mirdha (2015) Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach. Advanced Materials Research, 1115. pp. 238-242. ISSN 1022-6680

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and S. , Mirdha (2015) Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research, 1115. pp. 166-169. ISSN 1022-6680

Benbelgacem, Farah Fadwa and Mohd. Salleh, Hamzah and Noorbatcha, Ibrahim Ali (2018) Construction of metagenomic DNA libraries and enrichment strategies. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 23-42. ISBN 978-981-13-2256-3

E

Embrandiri, Asha and Rupani, Parveen Fatemeh and Mohamad, Mohd Azrul Naim and Jamaludin, Mohd Hafiz (2018) Valorization of fish processing waste: a microbial perspective. In: 1st Euro-Mediterranean Conference for Environmental Integration (EMCEI), 22-25 November 2017, Sousse, Tunisia.

F

Fuhaid, Mutlag S. and Murali, R.V. and Maleque, Md Abdul and Abd Rahman, Mohamed (2021) Reuse of marble wastes as reinforcement phase in LM6 aluminium matrix composites for automotive applications. International Journal of Powertrains, 10 (2). pp. 188-203. ISSN 1742-4267 E-ISSN 1742-4275

Fuhaid, Mutlag Shafi and Murali, R V and Maleque, Md. Abdul and Krishnan, P K and Abd. Rahman, Mohamed (2021) Synthesis and characterisation of aluminium composite with graphene oxide reinforcement. IOP Conference Series: Materials Science and Engineering, 1057. pp. 1-12.

H

Halmi Shari, Ummi Syuhada and Azmi, Azlin Suhaida and Amid, Azura (2018) Chemical mutation method for high CO2- requiring- mutants of the Cyanobacterium Synechococcus sp. PCC 7002. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 53-62. ISBN 978-981-13-2256-3

Hashim, Yumi Zuhanis Has-Yun (2011) Safe=(Halal + Toyyebah): personal care products, please! Muslim consumers are still facing dilemma in choosing halal cosmetics... Halal Pages 2011/2012. pp. 60-65. ISSN 1675-2465

I

Iqbal, Mohammad and Bamatraf, Abdullah Omar Abdullah and Tadjuddin, Muhammad (2018) The study of production performance of water heater manufacturing by using simulation method. In: 2nd International Conference on Nuclear Technologies and Sciences, ICoNETS 2017, 12 -13 October 2017, Makassar; Indonesia.

J

J. N., Hasnidawani and Hassan, Noor Azlina and Hassan, Norita and Bonnia, Noor Najmi (2018) Hardness and adhesion performances of nanocoating on carbon steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

J.N, Nor Hasnidawani and Hassan, Noor Azlina and Hassan, Norita and Bonnia, Noor Najmi and Ratim, Suzana and E. S., Ali (2016) Synthesis of ZnO nanostructures using sol-gel method. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), 4th-6th August 2015, Penang, Malaysia.

Jafri, Nur Huda Syazwani and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Ahmad Nor, Yusilawati and Amid, Azura (2023) Optimum yield of empty fruit bunches cellulose nanofibers by deep eutectic solvent and ultrasonication. Chemical Engineering and Technology, 47 (1). pp. 56-67. ISSN 0930-7516 E-ISSN 1521-4125

Jafri, Nur Huda Syazwani and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Ahmad Nor, Yusilawati and Amid, Azura (2023) Screening of deep eutectic solvent mixtures for treating empty fruit bunches to obtain cellulose nanofiber. Materials Today: Proceeding. E-ISSN 2214-7853

Jahurul, M. H. A. and Soon, Y. and Sharifudin, Md. Shaarani and Hasmadi, M. and Mansoor, A. H and Sarker, Md. Zaidul Islam and Lee, J. S and Ali, Md. Eaqub and Ghafoor, Kashif and Zzaman, Wahidu and Jinap, S. (2018) Bambangan (Mangifera pajang) kernel fat: a potential new source of cocoa butter alternativ. International Journal of Food Science and Technology, 53. pp. 1689-1697. E-ISSN 1365-2621 (In Press)

Jamalludin, Nurul Hidayah and Tukiran, Nur Azira (2018) Analysis of gelatin adulteration in edible bird's nest using Fourier transform infrared (FTIR) spectroscopy. International Journal on Advanced Science, Engineering and Information Technology, 8 (6). pp. 2355-2359. ISSN 2088-5334 E-ISSN 2460-6952

Jimat, Dzun Noraini and Avicenna, Avicenna (2018) Isolation of microfibrillated cellulose (MFC) via fungal cellulases hydrolysis combined with ultrasonication. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 109-118. ISBN 978-981-13-2256-3

Jimat, Dzun Noraini and Syed Putra, Sharifah Shahira and Jamal, Parveen and Wan Nawawi, Wan Mohd Fazli and Jami, Mohammed Saedi (2020) Effect of y-methacryloxypropyltrimethoxysilane (MPS) and tetraethoxysilane (TEOS) towards preparation of oil absorbent foams from polyvinyl alcohol (PVA) reinforced with microfibrillated cellulose (MFC). Journal of Renewable Materials, 8 (7). pp. 739-757. ISSN 2164-6325 E-ISSN 2164-6341

K

Kahlib, N. A.Z. and Mohd Daud, Farah Diana and Mel, Maizirwan and Nor Hairin, Assayidatul Laila and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina (2018) Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Khalifa, Shaden Ali M. and Elashal, Mohamed and Kieliszek, Marek and Ghazala, Naglaa E. and Farag, Mohamed Ali and Saeed, Aamer and Xiao, Jianbo and Zou, Xiaobo and Khatib, Alfi and Göransson, Ulf and El-Seedi, Hesham R. (2020) Recent insights into chemical and pharmacological studies of bee bread. Trends in Food Science and Technology, 97. pp. 300-316. ISSN 0924-2244

Kwon, Taegyun and Kim, Taesu and Ali, Fathilah and Kang, Dong Jin and Yoo, Misang and Bang, Joona and Lee, Wonbo and Kim, Bumjoon J. (2011) Size-controlled polymer-coated nanoparticles as efficient compatibilizers for polymer blends. Macromolecules, 44. pp. 9852-9862. ISSN 1520-5835 (O), 0024-9297 (P)

L

Long, Jia Jia and Benoudjit, Abdel Mohsen and Arris, Farrah Aida and Ali, Fathilah and Wan Salim, Wan Wardatul Amani (2018) Polymers in biosensors. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 151-166. ISBN 978-981-13-2256-3

M

M, Asem and Wan Nawawi, Wan Mohd Fazli and Jimat, Dzun Noraini (2018) Evaluation of water absorption of polyvinyl alcohol-starch biocomposite reinforced with sugarcane bagasse nanofibre: optimization using two-level factorial design. IOP Conference Series: Materials Science and Engineering, 368 (012005).

M. H. A, Musa and Maleque, Md. Abdul and Ali, M. Y. (2017) Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur.

Mahmood, M. H. and Maleque, Md. Abdul and Rahman, M.M. Hafizur (2022) Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5). pp. 6013-6023. ISSN 2193-567X E-ISSN 2191-4281

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2020) Effective parameter of nano-CuO coating on CO gas-sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering (AJSE), xx (xx). pp. 1-5. ISSN 2193-567X E-ISSN 2191-4281 (In Press)

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2021) Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering, 46. pp. 6557-6566. ISSN 2193-567X E-ISSN 2191-4281

Maleque, Md. Abdul and , W. Saffina and Ahmed, A. S and Ali, M. Y. (2017) Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur.

Maleque, Md. Abdul and Adebisi, Adetayo Abdulmumin and Zainal, Nur Izzati (2017) Analysis of fracture mechanism for al-Mg/SiCp composite materials. IOP Conference Series: Materials Science and Engineering, 184. 012031-1. ISSN 1757-8981 E-ISSN 1757-899X

Maleque, Md. Abdul and Afiq, M. (2017) Particulate preplaced TIG melted surface layer of duplex stainless steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Adebisi, Adetayo Abdulmumin and -, Normaizatul Akma (2017) Optimization of tribological performance of SiC embedded composite coating via Taguchi analysis approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Cetin, Safa Y. and Hassan, Masjuki and Sulaiman, Mohd Hafiz and Rosli, Adib Hamdani (2022) A systematic review on corrosive-wear of automotive components materials. Jurnal Tribologi, 35. pp. 33-49. E-ISSN 2289-7232

Maleque, Md. Abdul and Md Idriss, Ahmed Nazrin and Naping, Rosmia and Rahman, Md Mustafizur and Efeoglu, Ihsan (2024) The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG Arc process. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 33-42. ISSN 2289 – 7895

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina and Halim, Zahurin (2018) Eco-SiC reinforced aluminium matrix composite for motorbike brake disc application. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and D., Ramasamy (2021) An overview on synthesis, stability, opportunities and challenges of nanofluids. Materials Today: Proceedings, 41. pp. 30-37. E-ISSN 2214-7853

Mardina, Vivi and Yusof, Faridah (2018) Skim latex serum as an alternative nutrition for microbial growth. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 179-196. ISBN 978-981-13-2256-3

Mat Nor, Nahidah and Mohd Zaid, Siti Hajar and Mat Jubri@Shamsuddin, Mustafa and Jamaludin, Mohd Aizat (2019) Analysis of allantoin sources from shariah perspective in cosmetic product = Hukum ramuan allantoin dalam produk kosmetik. Al-Qanatir: International Journal of Islamic Studies, 15 (1). pp. 23-35. E-ISSN 2289-9944

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2021) The effect of working distances on the formation of TiC composite surface hardening using TIG melting technique. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Mel, Maizirwan and Abdeen, Fouad and Sopyan, Iis (2009) Fabrication of ceramic membrane chromatography for biologics purification. In: Advanced materials and Processing Technologies, 26-29 October 2009, Kuala Lumpur.

Mohamad Jamil, Nur Arifah and Mohamaddiah, Ahmad Hadi and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2023) High entropy alloy as metal additive for hybrid rocket propellant. Materials Today: Proceedings, 75 (Part 1 (January 2023)). pp. 140-146. E-ISSN 2214-7853

Mohamed Azmin, Nor Fadhillah (2018) Integrated data analysis model for screening cell line producer. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 227-234. ISBN 978-981-13-2256-3

Mohan, Raja and Ali, Fathilah (2023) The future of energy harvesting: a brief review of MXenes-based triboelectric nanogenerators. Polymers for Advanced Technologies, 34 (10). pp. 3193-3209. ISSN 1042-7147 E-ISSN 1099-1581 (In Press)

Mohd Arshad, Zatul Iffah and Amid, Azura (2018) Procedure to develop binodal curve and phase diagram for aqueous two-phase system. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 75-82. ISBN 978-981-13-2256-3

Mohd Daud, Farah Diana and Johari, Muhammad Hilmi and Ahmad Jamal, Afiq Haikal and Kahlib, Nor Amyra Zulianey and Hairin, Assayidatul Laila Nor (2019) Preparation of nano-silica powder from silica sand via sol-precipitation method. In: "International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018", 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

Mohd Zawawi, Luqman Hafizi and Mohamed Azmin, Nor Fadhillah and Abd Wahab, Mohd Firdaus and Ibrahim, Siti Noorjannah and Mohd Yunus, Mohd Yusri (2021) Forensic analysis on printer inks via multivariate data analysis. In: 6th International Conference on Biotechnology Engineering 2021, 22-23 June 2021, Kuala Lumpur, Malaysia (Online). (Unpublished)

Mustaffa, Nooraidah and Jamal, Parveen and Olorunnisola, Kola Saheed and Ansari, Abdul Haseeb (2018) Method for isolation of bacterial strain from contaminated soil for biodegradation of polycyclic aromatic. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 197-202. ISBN 978-981-13-2256-3

N

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hj Hassan, Masjuki and Bello, Kamilu Adeyemi (2024) Contemporary progress in the hybrid coating of titanium alloys using the liquid additive manufacturing technique. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 108-117. ISSN 2289-7895

O

Omar, Mohamad Firdaus and Mohamad, Nuriah and Azmi, Azlin Suhaida and Ali, Fathilah (2019) Properties of sulphur in colloidal system: a review. Biological and Natural Resources Engineering Journal (BNREJ), 2 (2). pp. 13-20. E-ISSN 2637-0719

Othman, Maizatulnisa and Rashid, Haziq and Jamal, Nur Ayuni and Shaharuddin, Sharifah Imihezri and Sulaiman, Sarina and Hairil, H. Saffiyah and Khalid, Khalisanni and Zakaria, Nazarudin (2019) Effect of cinnamon extraction oil (CEO) for algae biofilm shelf-life prolongation. Polymers, 11 (1). pp. 1-10. ISSN 2073-4360

P

Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles. In: The 5th International Conference and Exhibition On Energy and Advanced Materials (ICE-SEAM2017), 16th-19th Oct. 2017, Melaka.

Parveez, Bisma and Jamal, Nur Ayuni and Md. Abdul, Maleque and Yusof, Farazila and Jamadon, Nashrah Hani and Syed Abu Bakar, Sharifah Adzila (2021) Review on advances in porous Al composites and the possible way forward. Journal of Materials Research and Technology, 14. pp. 2017-2038. ISSN 2238-7854 E-ISSN 2214-0697

Polat, Muhammed Alperen and Gülten, Gökhan and Totik, Ya¸sar and Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Çetin, Safa and Efeoglu, Ihsan (2023) Synthesis and characterization of Ta/TaN coatings with CFUBMS-HiPIMS technology. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9—10 August, 2022, Kuala Lumpur, Malaysia.

R

Rahat, Arifutzzaman and Ismail, Ahmad Faris and Khan, Ahsan Ali and Alam, Md Zahangir and Rahman, Saidur (2020) Effect of particle loading on the stability of the water based iron-oxide nanofluids. International Journal of Advanced Science and Technology, 29 (1). pp. 1326-1333. ISSN 2005-4238 E-ISSN 2207-6360

Rahman, Md. Mokhlesur and N, Hasnida and Wan Nik, Wan Mohd Norsani (2009) Preparation of Zeolite Y using local raw material rice husk as a silica source. Journal of Scientific Research, 1 (2). pp. 285-291. ISSN 2070-0245 (O), 2070-0237 (P)

Roslan, Alida and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani (2019) Comparison of zirconia toughened alumina fracture toughness obtained from Vickers indentation by applying various equations. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

S

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Jumaidin, R. (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 57-70. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Suriani, M.J. and YUsriah, L. (2019) Review of development and characterization of sugar palm fiber–reinforced polymer composites. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 15-40. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul (2015) Modelling of mechanical properties of eco-friendly composites derived from sugar palm tree. Advances in Environmental Biology, 9 (19). pp. 176-181. ISSN 1995-0756

Samat, Noorasikin and Mohmed Nasir, Muhamad Faris Farhan and Marzuki, Zubaidah and Md Akil, Hazizan (2021) Mechanical performance of composites materials prepared from waste plastics and tubed tyre. Journal of Sustainability Science and Management, 16 (8). pp. 229-239. ISSN 1823-8556 E-ISSN 2672-7226 (In Press)

Sapian, Nur Ain Syaqirah and Mohamad Roslan, Muhamad Aidilfitri and Mohd Hashim, Amalia and Abdul Manaf, Yanty Noorzianna and Mohd Desa, Mohd Nasir and Halim, Murni and Abdullah Sani, Muhamad Shirwan and Yusof, Mohd Termizi and Pak Dek, Mohd Sabri and Wasoh, Helmi (2023) N-Alkane profiles of lard and vegetable oils, and their chemometrics differentiation. Journal of Oil Palm Research, In Press. pp. 1-10. E-ISSN 2811-4701 (In Press)

Saputra, Irwan and Jaswir, Irwandi and Akmeliawati, Rini (2018) Profiling of wavelength biomarkers of pure meat samples from different species based on Fourier transform infrared spectroscopy (FTIR) and PCA techniques. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1617-1624. ISSN 2088-5334

Seeni Mohamed, Nurhafizah and Mel, Maizirwan and Anuar, Hazleen and Othman, Rashidi and Mohd Nasir, Nur Aimi (2012) Extraction of glucose from kenaf core using mild acid treatment. In: 26th Symposium of Malaysian Chemicals Engineers in conjunction with the 4th International Conference on Chemical and Bioprocess Engineering, 21-23 November 2012, Sabah.

Sofian, Anis Sofia and Samat, Noorasikin and Meor sulaiman, Meor Yusoff (2015) Effect of dispersants on microstructures of nano alpha alumina developed from aluminium dross waste. Advanced Materials Research, 1115. pp. 378-381. ISSN 1022-6680

Sulaiman, Sarina (2018) Identification of fatty acid methyl ester in palm oil using gas chromatography-mass spectrometer. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 63-74. ISBN 978-981-13-2256-3

Sulaiman, Sarina and Talha, Nur Syakirah (2018) Technique to produce catalyst from egg shell and coconut waste for biodiesel production. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 83-92. ISBN 978-981-13-2256-3

T

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah (2020) Electrocoagulation (EC) process to sustainably Treat Palm Oil Mill Effluent (POME) for wastewater reuse. In: Kulliyyah of Engineering Research, Innovation and Commercialization Exhibition (KERICE) 2020, 8th December 2020, Kuala Lumpur.

W

W.B., Wan Nik and Rahman, Md. Mokhlesur and M.F, Ahmad and J., Ahmad and A.M., Yusof (2012) Removal capability of Carbon-Soil-Aquifer filtering system in water microbiological pollutants. In: Ecological water quality – water treatment and reuse. http://www.intechopen.com/books/ecological-water-quality-water-treatment-and-reuse, Kroatia, pp. 409-424. ISBN 978-953-51-0508-4

Y

Yusof, Faridah and Khanahmadi, Soofia (2018) Carrier-free enzyme immobilization by cross-linked enzyme aggregates (CLEA) technology. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 93-108. ISBN 978-981-13-2256-3

Yusoff Sayuti, Nurul Hidayah and Jimat, Dzun Noraini and Azmi, Azlin Suhaida and Ahmad Raus, Raha and Amid, Azura and Jamal, Parveen (2018) Isolation and screening of newly isolated bacteria producing nanocellulose from rotten banana skin and sugarcane bagasse. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.