Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics > TL1 Motor vehicles"

Shahimi, Sharis Shazzali and Ridhuan Siradj , Fadly Jashi Darsivan (2013) Modeling and simulation of a quarter car model with a nonlinear damper. In: nternational Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2-4 July 2013, Kuala Lumpur.

A

Aabid, Abdul and Chaudhary, Zakir Ilahi and Khan, Sher Afghan (2019) Modeling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 34-51. ISSN 2289-7879 E-ISSN 2289-7879

Aabid, Abdul and Murtuza, Mohammed Ali and Khan, Sher Afghan and Baig, Muneer (2022) Optimization of dry sliding wear behavior of aluminum-based hybrid MMC's using experimental and DOE methods. Journal of Materials Research and Technology, 16 (1). pp. 743-763. ISSN 2238-7854

Abd Rahman, Badruzzaman and Mohd Sohimin, Muhammad H F and Meor Said, Mior A and Tuan Kamaruddin, Tengku Nordayana Akma and Abu Husain, Nurulakmar and Mohamad Jamil, Siti Nurnadilla and Balaka, Ridway and Abu Kassim, Khairil A (2019) Rearward visibility assessment and a proposed performance scoring for ASEAN NCAP. In: 4th International Conference & Sustainable Mobility (ICSM), 21st-22nd November 2019, Bali, Indonesia. (Unpublished)

Abdul, Abid and Hrairi, Meftah and Abuzaid, Ahmed and Mohamed Ali, Jaffar Syed (2021) Estimation of stress intensity factor reduction for a center-cracked plate integrated with piezoelectric actuator and composite patch. Thin Walled Structures, 158. pp. 1-15. ISSN 0263-8231

Abdul Rahman, Julaila and Kamaruddin, Zumahiran and Masron, Nur Nabilah (2020) Sidecar motorcycle for service oriented mobileprenuer. In: Malaysian Technology Expo 2020, 20th-22nd February 2008, Kuala Lumpur.

Abdul Razak, Fadhilah and Rahman, Mohammed Ataur (2012) Dynamic modeling and simulation of waste energy harvesting system for urban car. Advanced Material Research, 576. pp. 679-682. ISSN 1662-8985

Abdullah, Kassim Abdulrahman (2012) Design and fabrication of the second generation IIUM buggy car. Research Report. s.n, Kuala Lumpur. (Unpublished)

Abdullah, Kassim Abdulrahman and Wan Sulaiman, Nur Hidayah (2011) Buckling and crush analysis of light weight structure. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, pp. 48-53. ISBN 9789674181741

Abdullah, Kassim Abdulrahman and Cheah , Siew Loong (2011) Design and fabrication of the testing model of the vehicle structure test system. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, pp. 196-201. ISBN 9789674181741

Abdullah, Kassim Abdulrahman and Mohamed Ali, Jaafar Syed and Habeeb Rahmathullah, Mohd Azlan and Kaharuddin, Ruzael Amir Afendi (2011) Design and development of driving system for disabled driver. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 208-213. ISBN 9789674181741

Abdullah, Kassim Abdulrahman and Mohamed Ali, Jaffar Syed and Tuan Kamaruddin, Tengu Nordayana and Md Saufi, Syaira Jihan (2010) Design and development of driving system for disabled driver. In: World Engineering Congress 2010, 2-5 August 2010, Kuching, Sarawak, Malaysia.

Abdullah, Kassim Abdulrahman and Nimir, Yassin Lutfi Mahmud (2013) Structural analysis of the frontal part of a local car model for crashworthiness. In: 24th IASTED International Conference on Modelling and Simulation, 17th-19th July 2013, Banff, Canada.

Abdullah, Kassim Abdulrahman and Roslan, Zahra (2011) Analysis of lightweight structural tubes for crashworthy car body. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 54-60. ISBN 9789674181741

Abdullah, Kassim Abdulrahman and Rosli, Mohd Zaimi (2011) Design analysis of laminated composite ladder chassis frame of light truck. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, pp. 202-207. ISBN 9789674181741

Abdullah, Mohd Rajmin Affendi and Mohamad Hanif, Noor Hazrin Hany and Toha @ Tohara, Siti Fauziah and Kamisan, Nor Azam (2017) Retrofitting commercial motorbikes into electric motorbikes. In: 3rd National Conference on Knowledge Transfer (NCKT'16), 30th Nov.-1st Dec. 2016, Pulau Pinang.

Abdullah, Muhammad and Zainuddin, Mohamed Al-Sideque and Ahmad, Salmiah and Rossiter, John Anthony (2023) Performance comparison between centralized and hierarchical predictive functional control for adaptive cruise control application. International Journal of Automotive and Mechanical Engineering, 20 (4). pp. 10808-10820. ISSN : 2229-8649 E-ISSN 2180-1606

Abdullah, Nur Azam (2021) Adaptasi teknologi, persekitaran tingkat keberkesanan produk. Berita Harian, 17 April 2021. p. 12.

Abdullah, Nur Azam and Mohamad, Ahmad Azmin (2022) Recycling EV batteries for environmental ecosystem wellbeing. New Straits Times, 03 April 2022.

Abu Hanifah, Rabiatuladawiyah and Toha, Siti Fauziah and Mohamad Hanif, Noor Hazrin Hany and Kamisan, Nor Azam (2019) Electric motorcycle modeling for speed tracking and range travelled estimation. IEEE Access, 7. pp. 26821-26829. ISSN 2169-3536

Abu Hanifah, Rabiatuladawiyah and Toha @ Tohara, Siti Fauziah and Ahmad, Salmiah and Hassan, Mohd. Khair (2016) Power reduction optimization with swarm based technique in electric power assist steering system. Energy, 102. pp. 444-452. ISSN 1873-6785 (O), 0360-5442 (P) E-ISSN 1873-6785

Adli, Mohd Syakir and Mohamad Hanif, Noor Hazrin Hany and Toha, Siti Fauziah (2018) Brushless DC motor speed controller for electric motorbike. International Journal of Power Electronics and Drive System (IJPEDS), 9 (2). pp. 859-864. ISSN 2088-8694

Afzal, Asif and Bhutto, Javed Khan and Alrobaian, Abdulrahman and Kaladgi, Abdul Razak and Khan, Sher Afghan (2021) Modeling and computational experiment to obtain optimized neural network for battery thermal management data. Energies, 14 (7370). pp. 1-19. ISSN 1996-1073

Afzal, Asif and Mokashi, Imran and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi (2020) Optimization and analysis of maximum temperature in a battery pack affected by low to high Prandtl number coolants using response surface methodology and particle swarm optimization algorithm. Numerical Heat Transfer, Part A: Applications. ISSN 1521-0634 E-ISSN 1040-7782 (In Press)

Ahmad Shuhaili, Ahmad Fadzil and Ihsan, Sany Izan and Faris, Waleed Fekry (2013) Air pollution study of vehicles emission in high volume traffic: Selangor, Malaysia as a case study. WSEAS Transactions on Systems , 12 (2). pp. 67-84. ISSN 2224-2678 (O), 1109-2777 (P)

Akhtaruzzaman, Md. and Mohd Razali, Norrul’ Aine and Rashid, Muhammad Mahbubur and Shafie, Amir Akramin (2012) An experiment on electric power steering (EPS) system of a CAR. Applied Mechanics and Materials, 110/16. pp. 4941-4950. ISSN 1662-7482

Akhtaruzzaman, Md. and Mohd Razali, Norrul’ Aine and Rashid, Muhammad Mahbubur and Shafie, Amir Akramin (2010) An experiment on electromechanical power steering (EPS) system of a CAR. In: 2010 International Conference on Mechanical and Aerospace Engineering (ICMAE), 26-28 November 2010, Kuala Lumpur, Malaysia.

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Improvement of greenhouse by reducing gas emissions using replacement policy. International Journal of Energy Technology and Policy, 8 (3/4/5/). pp. 323-335. ISSN 1741-508X

Al-Bahash, Zeid Fadel and Ansari, M.N.M. Ansari and Shah, Qasim Hussain (2018) Design and simulation of a rear underride protection device (RUPD)for heavy vehicles. International Journal of Crashworthiness, 23 (1). pp. 47-56. ISSN 1358-8265 E-ISSN 1754-2111

Altaf, A. and Omar, Ashraf and Asrar, Waqar (2022) Passive drag reduction of the square back truck body. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). pp. 9892-9908. ISSN 2229-8649 E-ISSN 2180-1606

Altaf, Alaman and Omar, Ashraf Ali and Asrar, Waqar (2014) Passive drag reduction of square back road vehicles. Journal of Wind Engineering and Industrial Aerodynamics, 134 (2014). pp. 30-43. ISSN 0167-6105

Altaf, Alaman and Omar, Ashraf Ali and Asrar, Waqar (2014) Review of passive drag reduction techniques for bluff road vehicles. IIUM Engineering Journal, 15 (1). pp. 61-69. ISSN 1511-788X

Asadullah, Mohammed and Khan, Sher Afghan and Rajendran, Parvathy and Sulaeman, Erwin (2021) Design intent of future tunnels. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (2). pp. 50-63. ISSN 2289-7879

Atef, Nagwaeen and Abdul Rahman, Julaila and Mohd. Din, Shamzani Affendy and Sapian, Abdul Razak (2019) A review of sustainable design in the automotive industry. Journal of Architecture, Planning and Construction Management, 9 (2). pp. 57-68. ISSN 2231 - 9514 E-ISSN 2462 - 2222

Awang, Abdul Bari and Mahdie, Imam (2018) Peminangan atau melamar, dan akibatnya menurut hukum Islam serta undang-undang Islam di Indonesia. Fikiran Masyarakat, 6 (2). pp. 77-82. ISSN 2338-512X

Azami, Muhammad Hanafi and Faheem, Mohammed and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Inspection of supersonic flows in a CD nozzle using experimental method. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3). pp. 996-999. ISSN 2277-3878

Azhar, Marsad Latif and Mannan, Abdul and Khan, Md. Raisuddin and Bhuiyan, Moinul and Saleh, Tanveer (2014) Inner ambient control of the parked vehicle in a hot sunny day by remote access. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Gombak, Kuala Lumpur.

B

Badran, Marwan Atef and Toha @ Tohara, Siti Fauziah (2024) Employment of artificial intelligence (AI) techniques in battery management system (BMS) for electric vehicles (EV): issues and challenges. Pertanika Journal Science and Technology, 32 (2). pp. 859-881. ISSN 0128-7680 E-ISSN 2231-8526

Bashir, Musavir and Baig, Maughal Ahmed Al and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Control of suddenly expanded flows from correctly expanded and under expanded nozzles at supersonic mach number for area ratio 2.56. IOSR journal of Mechanical & Civil Engineering, 3. pp. 76-82. ISSN 2320-334x E-ISSN 2278-1684

BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan and Ridhuan Siradj , Fadly Jashi Darsivan (2014) Optimisation and control of semi-active suspension using genetic algorithm for off-road full vehicle. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 372-382. ISSN 1745-6444 (O), 1745-6436 (P)

C

Cetin, S Y and Maleque, Md. Abdul and Masjuki, H H (2022) Simulation of wear map for biodiesel interacted automotive materials. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21 - 23 June 2021, Kuala Lumpur, Malaysia.

Che Saufi, Nurul Nadia and Mohd Ab Razak, Nur Shuhadah and Mansor, Hafizah (2019) “Forent – Vehicle forensics for car rental system”. In: 2019 the 4th International Conference on Multimedia and Image Processing (ICMIP 2019) 2019 the 3rd International Conference on Cryptography, Security and Privacy (ICCSP 2019), 19 -21 January 2019, University of Malaya Kuala Lumpur.

Crasta, Asha and Khan, Sher Afghan (2015) Effect of angle of attack on damping derivatives of delta wing with full sine wave curved leading edge. International Journal of Emerging trends in Engineering and Development (IJETED), 5 (1). pp. 237-245. ISSN 2249-6149

D

Darsivan, Fadly Jashi (2016) The investigation of a ride quality of nonlinear half-car model. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 25–27 July 2016, Kuala Lumpur, Malaysia, 25-27 July 2016, IIUM, Gombak.

E

Embong, Abd Halim and Yahya, Fatin Diyana and Rashid, Muhammad Mahbubur (2023) Study on smart downtime monitoring system in glove production. International Journal of Engineering Materials and Manufacture, 8 (4). pp. 124-131. E-ISSN 0128-1852

F

Faried Hasbullah, Faried Hasbullah and Faris, Waleed Fekry and Ridhuan Siradj , Fadly Jashi Darsivan and Abdelrahman, Mohammad (2015) Ride comfort performance of a vehicle using active suspension system with active disturbance rejection control. International Journal of Vehicle Noise and Vibration, 11 (1). pp. 78-101. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Analysis of semi-active suspension systems for four-axles off-road vehicle using half-model. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 91-115. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) Transient and steady state dynamic analysis of passive and semi-active suspension systems using half-car model. International Journal of Modelling, Identification and Control, 6 (1). pp. 62-71. ISSN 1746-6180 (O), 1746-6172 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry and Khalid, Asad A. and Albagul, Abdulgani and Ismail, Godem A. (2012) Investigation of the perfomance of a rotor-bearing systems containig composite and non-composite squeeze film dampers. Materials and Design, 34. pp. 340-345. ISSN 0261-3069

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2014) Optimal design of magneto-rheological damper comparing different configurations by finite element analysis. Journal of Mechanical Science and Technology, 28 (9). pp. 3667-3677. ISSN 1976-3824 (O), 1738-494X (P)

Fharukh, G M and Asad Ullah, M and Khan, Sher Afghan (2016) Exprimental study suddenly expanded flow from correctly expanded nozzles. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 10041-10047. ISSN 1819-6608

H

Hanifah, Rabiatul A. and Toha, Siti Fauziah and Ahmad, Salmiah (2014) Energy consumption optimization with PSO scheme for electric power steering system. International Journal of Computer Theory and Engineering, 7 (4). pp. 297-301. ISSN 1793-8201

Hanouf, Zahir and Faris, Waleed Fekry and Ahmad, Kartini (2017) An investigation into NVC characteristics of vehicle behaviour using modal analysis. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Hanouf, Zahir and Mohd. Nor, Mohd. Jailani and Faris, Waleed Fekry (2007) Engine noise: An overview on current research trends. In: Conference on Advances in Noise, Vibration and Comfort (NVC) 2007, 27th-28th November 2007, Putra Jaya , Malaysia.

Hasan Gani, Muhammad Hamdan and Khalifa, Othman Omran (2017) Traffic intensity monitoring using multiple object detection with traffic surveillance cameras. In: 6th International Conference on Mechatronics - ICOM'17, 8th–9th August 2017, Kuala Lumpur.

Hasbullah, Faried and Faris, Waleed Fekry (2010) A comparative analysis of LQR and fuzzy logic controller for active suspension using half car model. In: 11th International Conference on Control, Automation, Robotics and Vision, ICARCV 2010, 7-10 december 2010, Singapore.

Hassan, M.K. and Azubira, N.A.M. and Nizama, H.M.I. and Toha, Siti Fauziah and Ibrahima, B.S.K.K. (2012) Optimal design of electric power assisted steering system (EPAS) using GA-PID method. Procedia Engineering, 41. pp. 614-621. ISSN 1877-7058

Hoda, Asif (2011) Direct numerical simulation (DNS) and large eddy simulation (LES). In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 177-181. ISBN 978-967-418-216-8

Hoda, Asif (2011) Film cooling of turbine blades. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 192-196. ISBN 978-967-418-216-8

Hoda, Asif (2011) Numerical simulation of complex turbulent flows. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 172-176. ISBN 978-967-418-216-8

Hoda, Asif (2011) Reynolds averaged navier stokes (RANS) simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 182-191. ISBN 978-967-418-216-8

Hossain, Altab and Rahman, Mohammed Ataur (2014) Sensor-controlled intelligent vehicle systems: demand and needs for a global automotive landscape. In: Comprehensive material processing. Elsevier, Ltd, UK, pp. 473-497. ISBN 9780080965321

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2010) Load distribution for an intelligent air-cushion track vehicle based on optimal power consumption. International Journal of Vehicle Systems Modelling and Testing, 5 (2/3). pp. 237-253. ISSN 1745-6444 (O), 1745-6436 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Mobility investigation of an intelligent air-cushion tracked vehicle on swamp peat terrain in Malaysia. In: SAE 2011 World Congress & Exhibition, April 2011, Detroit, MI, USA.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Nonlinear controller of an air-cushion system for a swamp terrain vehicle: fuzzy logic approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225. pp. 721-734. ISSN 0954-4070

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Study of Fuzzy Controller to control vertical position of an air-cushion tracked vehicle. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. International Journal of Aerospace and Mechanical Engineering, 4 (1). pp. 288-295. ISSN 2010-3794 (O), 2010-3786 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Study on air-cushion tracked vehicle performance: theoretical analysis and experimental validation. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Tractive performance prediction for intelligent air-cushion track vehicle: fuzzy logic approach. World Academy of Science, Engineering and Technology, 62. pp. 163-169. ISSN 1307-6884

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian and Muhidin, Arifin (2010) Development of an intelligent air-cushion system for a swamp tracked vehicle. In: 33rd FISITA World Automotive Congress 2010, 30 May - 4 June 2010, Budapest, Hungary.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ramesh, Singh (2012) Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), 19 (4). pp. 407-426. ISSN 1744-232X E-ISSN 1741-5152

Hrairi, Meftah and Echrif, Salah B. M. (2011) Enhancing magnetic particle testing of automotive parts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 189-195. ISBN 9789674181741

Hrairi, Meftah and Rizal, Mohd Shah and Echrif, Salah B. M. (2011) Development of automatic magnetic particle system for automotive parts inspection. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 160-165. ISBN 978-967-418-216-8

Hrairi, Meftah and Rizal, Mohd Shah and Echrif, Salah B. M. (2011) Performance of an automatic magnetic particle inspection of automotive parts. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 166-171. ISBN 978-967-418-216-8

Hussain Shah, Qasim and Abid, Hasan M. and Rosli, Adib (2011) Liquid sloshing. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 215-219. ISBN 9789674181741

I

Ibrahim, Babul Salam K.K. and Mohd Azubir, Nor Aziah and Ishak, Norlela and Hassan, Mohd Khair and Toha, Siti Fauziah and Zainul Abidin, Mohd Azman and Ismail, Hashimah and Zamzuri, Hairi (2012) PI-fuzzy logic control for 3 phase BLDC motor for electric vehicle application. In: 2012 UKSim-AMSS 6th European Modelling Symposium, 14-16 November 2012, Malta.

Ibrahim, Nur Asmawiyah and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Asman, Asyfiq Hanif (2017) Experimental study of stress-strain behaviour of open-cell aluminium foam sandwich panel for automotive structural part. International Journal of Engineering Materials and ManufactureInternational Journal of Engineering Materials and Manufacture, 2 (2). pp. 25-30. E-ISSN 0128-1852

Idros, Syed and Abdullah, Muhammad and Toha @ Tohara, Siti Fauziah and Md Said, Mohamad Syazarudin (2024) Modelling of vehicle longitudinal dynamics for speed control. Journal of Advanced Research in Applied Mechanics, 123 (1). pp. 56-74. E-ISSN 2289-7895

Ihsan, Sany Izan (2021) Retrofitting electric vehicle: The IIUM journey achievements, challenges and moving forward. In: The First UNITED SAIG International Conference International Collaboration Towards Sustainable and Green Automotive Technology, 21-22 April 2021, Chulalongkorn University, Thailand.

Ihsan, Sany Izan (2011) Semiactive control policies : ride analysis for passenger vehicles. LAP LAMBERT Academic Publishing, Saarbrucken, Germany. ISBN 978-3-8443-8417-8

Ihsan, Sany Izan and Farid, Khairussani and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with enhanced fuel. In: 3rd (2011) CUTSE International Conference, 8-9 November 2011, Miri, Sarawak, Malaysia.

Islam, Maidul and Abdul Ghaffar, Alia Farhana and Sulaeman, Erwin and Ahsan, Md Manjurul and Kouzani, Abbas Z. and Mahmud, M.A. Parvez (2021) Performance analysis of PI and DMRAC algorithm in Buck-Boost Converter for voltage tracking in electric vehicle using simulation. Electronics, 10 (20). pp. 1-12. E-ISSN 2079-9292

Islam, Maidul and Abdullah, Muhammad and Abdul Ghaffar, Alia Farhana and Ahmad, Salmiah (2023) Comparison analysis between PI and adaptive controllers for DC-DC converter of hybrid energy storage systems in electric vehicles. International Journal of Automotive and Mechanical Engineering, 20 (3). pp. 10659-10670. ISSN 2229-8649 E-ISSN 2180-1606

Islam, Mazharul (2013) Analysis of the plug-in hybrid electric vehicle for the smart grid of Canada. International Journal of Environmental Studies, 70 (5). pp. 733-743. ISSN 0020-7233 E-ISSN 1029-0400

Ismail , Nur Hazima Faezaa and Toha, Siti Fauziah and Mohd Azubir, Nor Aziah and Md Ishak, Nizam Hanis and Hassan, Mohd Khair and Ibrahim, Babul Salam Ksm (2013) Simplified heat generation model for lithium ion battery used in electric vehicle. IOP Conference Series: Materials Science and Engineering, 53 (012014). pp. 1-5. ISSN 1757-8981

J

Jaimon, Dennis Quadros and Khan, Sher Afghan and Prashanth, T. (2022) CFD-based optimization of base pressure behavior on suddenly expanded flows at supersonic Mach numbers. Progress in Computational Fluid Dynamics, 22 (3). pp. 159-173. ISSN 1468-4349 E-ISSN 1741-5233

K

Kalamullah, Mohammed and Faris, Waleed Fekry and Hasbullah, Faried and Ghazaly, Nouby M. (2019) Control of using robust H∞ control with genetic algorithm. International Journal of Advanced Science and Technology, 28 (16). pp. 763-782. ISSN 2005-4238

Kaleemullah, Mohammed and Faris, Waleed Fekry and Hasbullah, Faried and Ghazaly, Nouby M. (2019) Optimization of robust and LQR control parameters for half car model using genetic algorithm. International Journal of Advanced Science and Technology, 28 (16). pp. 792-811. ISSN 2005-4238

Kamaruddin, Norhaslinda and Abdul Rahman, Abdul Wahab and Halim, Khairul Ikhwan Mohamad and Mohd Noh, Muhammad Hafiq Iqmal (2018) Driver behaviour state recognition based on speech. Telkomnika, 16 (2). pp. 852-861. ISSN 1693-6930 E-ISSN 2087-278X

Kathri, Naveed and Darsivan, Fadly Jashi and Waleed Fekry, Faris and Ismail, Ahmad Faris (2020) Fatigue life study of suspension ball joints on the basis of ride quality. International Journal of Vehicle Noise and Vibration, 16 (1/2). pp. 69-84. ISSN 1479-1471 E-ISSN 1479-148X

Khalid, A. Hilmi and Rahman, Mohammed Ataur and Hawlader, Mohammad Nurul Alam (2013) Evaporative cooling system for electric vehicles battery pack. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE 16), 2nd-4th July 2013, Kuala Lumpur. (Unpublished)

Khalifa, Othman Omran and Balfaqih, Mohammed and Saad Osman, Bashir and Albagul, Abdulgani (2012) Automatic car identification system. In: Proceedings of the 2nd International Conference on Mathematical Applications in Engineering (ICMAE2012) , 3-5 July, 2012, Kuala Lumpur.

Khan, Shaheer Ahmed and Rahman, Mohammed Ataur (2019) Efficiency of thin film photovoltaic paint: a brief review. Blue Eyes Intelligence Engineering & Sciences Publication, 7 (6S). pp. 163-169. ISSN 2277-3878

Khan, Sher Afghan and Aabid, Abdul and Baig, Maugal Ahmed Ali (2018) Design and fabrication of unmanned arial vehicle for multi-mission tasks. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4). pp. 475-484. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Alrobaian, Abdul Rahman and Asad Ullah, Mohammed and Khan, Abdul Mohsin (2019) Grooved cavity as a passive controller behind backward facing step. International Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 185-193. ISSN 2289-7879

Khan, Sher Afghan and Asad Ullah, Mohammed and G M, Fharukh Ahmed and Jalaluddeen, Ahmed and Ali Baig, Maughal Ahmed (2018) Flow control with aero-spike behind bluff body. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1001-1008. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Asad Ullah, Mohammed and G M, Fharukh Ahmed and Jalaluddeen, Ahmed and Baig, Maugal Ahmed Ali (2018) Passive control of base drag in compressible subsonic flow using multiple cavity. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4). pp. 39-44. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Asad Ullah, Mohammed and Sadiq, Jafar (2018) Passive control of base drag employing dimple in subsonic suddenly expanded flow. International Journal of Mechanical & Mechatronics Engineering, 18 (3). pp. 69-74. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Siddique, Umair M and Ansari, Emaad and Patil, Rajesh (2020) Numerical investigation of semi-empirical relation representing standard deviation in Nusselt profile due to water jet impingement. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 42-53. ISSN 2289-7879

Ksm Kader Ibrahim, Babul Salam and M. A., N. Aziah and Ahmad, Salmiah and Akmeliawati, Rini and H.M.I., Nizam and Abdul Muthalif, Asan Gani and Toha, Siti Fauziah and Hassan, Mohd Khair (2012) Fuzzy-based temperature and humidity control for HV AC of electric vehicle. Procedia Engineering, 41. pp. 904-910. ISSN 1877-7058

Kumbar, Shobha Suresh and Jadhav, Dipak Ashok and Jarali, Chetan S. and Talange, Dhananjay B. and Afzal, Asif and Khan, Sher Afghan and Asif, Mohammad and Abdullah, Mohd. Zulkifly (2021) Enhancement in Cathodic Redox Reactions of Single-Chambered Microbial Fuel Cells with Castor Oil-Emitted Powder as Cathode Material. Materials, 14 (4454). pp. 1-13. ISSN 1996-1944

L

Ladipo, Ismail and Darsivan, Fadly Jashi and Faris, Waleed Fekry (2016) Characterization of magnetorheological elastomer (MRE) engine mounts. Materials Today: Proceedings, 3 (2). pp. 411-418. ISSN 2214-7853

Ladipo, Ismail and Darsivan, Fadly Jashi and Faris, Waleed Fekry (2015) Evaluation of elastomeric models for engine mountings applications. International Journal of Vehicle Noise and Vibration, 11 (3/4). pp. 210-224. ISSN 1479-1471 E-ISSN 1479-148X

Ladipo, Ismail and Ridhuan Siradj, Fadly Jashi Darsivan and Waleed, Fekry Faris (2019) Computational validation of magnetorheological elastomers for engine mount application. International Journal of Recent Technology and Engineering, 7 (6S). pp. 180-184. E-ISSN 2277-3878

Latief, Marsad and Ali, Md. Azhar and Mannan, Abdul and Saleh, Tanveer and Bhuiyan, Moinul and Khan, Md. Raisuddin (2015) Remote interior temperature control of parked vehicles. Advanced Materials Research, 1115. pp. 494-498. ISSN 1022-6680

M

Mahmud, Md and Motakabber, S. M. A. and Islam, A. H. M. Zahirul and Nordin, Anis Nurashikin and Fawwaz Wafa, S. A. (2021) Advanced Adaptive PID Controller for BLDC Motor. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE), 22-23 June 2021, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Adebisi, Adetayo A. and Ahmed, Abu Saleh (2012) A novel approach for the prediction of thermal distribution in automotive brake rotor. In: 5th Engineering Conference (ENCON12), 10-12 July 2012, Kuching, Sarawak.

Maleque, Md. Abdul and Masjuki, H. H. and Sapuan, Salit Mohd (2003) Vegetable-based biodegradable lubricating oil additives. Industrial Lubrication and Tribology, 55 (3). pp. 137-143. ISSN 0036-8792

Maleque, Md. Abdul and Masjuki, H.H. and Ishak, M. (1998) Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel. Tribology Transaction, 41 (1). pp. 155-159. ISSN 1040-2004

Maleque, Md. Abdul and Sarker, Dyuti (2010) Development of material selection method for the application children bicycle frame. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Mangun, Muhd Firdause and Idres, Moumen and Abdullah, Kassim Abdulrahman (2015) Power management controller for hybrid electric vehicle using fuzzy logic. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9682-9687. ISSN 1819-6608

Masjuki, H. H. and Maleque, Md. Abdul and Kubo, Aizoh and Nonaka, Tetsuya (1999) Palm oil and mineral oil based lubricants - their tribological and emission performance. Tribology International, 32 (6). pp. 305-314. ISSN 0301-679X

Masjuki, H.H. and Gulzar, M. and Kalam, M. A. and M. Zulkifli, N. W. and Maleque, Md. Abdul (2023) Engine tribology enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings - Technologies and Applications. CRC Press, Tailor & Francies Group LLC, pp. 221-254. ISBN 9781032038575

Masjuki, H.H. and Kalam, Md Abul and Maleque, Md. Abdul and Kubo, Aizoh and Nonaka, Tetsuya (2001) Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. Journal of Automobile Engineering, 215 (3). pp. 393-404. ISSN 0954-4070

Masjuki, H.H. and Maleque, Md. Abdul (1996) Wear, performance and emissions of a two-stroke engine running on palm oil methyl ester blended lubricant. Journal of Engineering Tribology, 210 (4). pp. 213-219. ISSN 1350-6501

Meignanamoorthy, M and Ravichandran, Manickam and Mohanavel, Vinayagam and Afzal, Asif and Sathish, T and Alamri, Sagr and Khan, Sher Afghan and Saleel, Ahamad C. (2021) Microstructure, Mechanical Properties, and Corrosion Behavior of Boron Carbide Reinforced Aluminum Alloy (Al-Fe-Si-Zn-Cu) Matrix Composites Produced via Powder Metallurgy Route. Materials, 14 (4315). pp. 1-24. ISSN 1996-1944

Meor Said, Mior A and Mohd Sohimin, Muhammad H F and Abu Hussain, Nurulakmar and Abd Rahman, Badruzzaman and Tuan Kamaruddin, Tengku Nordayana Akma and Mohamad Jamil, Siti Nurnadilla and Balaka, Ridway and Abu Kassim, Khairil A (2019) Rearward visibility technology in ASEAN market. In: 4th International Conference & Sustainable Mobility (ICSM), 21st-22nd November 2019, Bali, Indonesia. (Unpublished)

Mizanur, Rahman and Rashid, Muhammad Mahbubur and Rahman, Mohammed Ataur and Alam, A. H. M. Zahirul and Ihsan, Sany Izan and Mollik, M S (2017) Analysis of the internal temperature of the cells in a battery pack during SOC balancing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Mohamad Fadzir, Tun Mohamad Aqil and Mansor, Hasmah and Gunawan, Teddy Surya and Janin, Zuriati (2018) Development of school bus security system based on RFID and GSM technologies for Klang Valley Area. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th Nov 2018, Songkhla, Thailand.

Mohamed Ali, Jaffar Syed and Mizuar, Iqtidar (2020) MATLAB-Based educational tool for failure analysis of composite laminates. In: UNSPECIFIED.

Mohiuddin, A. K. M. (2014) Development of catalytic converter using low cost metal. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Mohiuddin, A. K. M. (2015) Development of catalytic converter using non-precious metals. Advanced Materials Research, 1115. pp. 462-467. ISSN 1022-6680

Mohiuddin, A. K. M. (2011) Investigation of the Swirl Effect on Engine Using Designed Swirl Adapter. IIUM Engineering Journal, 12 (3). pp. 201-209. ISSN 1511-788X

Mohiuddin, A. K. M. and ., Muhamamd Nurhafez (2007) Experimental analysis and comparison performance characterisation of catalytic converters including simulation. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 1-7. ISSN 1823-0334

Mohiuddin, A. K. M. and Ashour, Ahmed Aly Ibrahim Shaaban and Yap, Haw Shin (2008) Design optimization of valve timing at various engine speeds using Multi-Objective Genetic Algorithm (MOGA). In: 19th IASTED International Conference Modelling and Simulation, 26 - 28 May, 2008, Quebec City, Quebec, Canada.

Mohiuddin, A. K. M. and Dzaidin, Mohd. (2006) Design and development of automobile exhaust system using GT-power. In: 3rd BSME-ASME International Conference on Thermal Engineering, 20-22 December, 2006, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Hossain, Altab and Rahman, Mohammed Ataur and Aminanda, Yulfian (2010) Tractive efficiency analysis for an intelligent air-cushion tracked vehicle. In: ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010 , 12-18 November, 2010, Vancouver, British Columbia, Canada.

Mohiuddin, A. K. M. and Ideres, Mohd Rashidin and Mohd Hashim, Shukri (2008) Experimental analysis of noise and back pressure for muffler design. Jurnal Kejuruteraan, 20. pp. 151-161.

Mohiuddin, A. K. M. and Ideres, Mohd Rashidin and Mohd Hashim, Shukri (2005) Experimental study of noise and back pressure for silencer design characteristics. Journal of Applied Sciences, 5 (7). pp. 1292-1298. ISSN 1812-5662 (O), 1812-5654 (P)

Mohiuddin, A. K. M. and Ideres, Mohd Rashidin and Mohd Hashim, Shukri (2005) Muffler design optimization through experimental analysis of noise and back pressure. In: The 2nd International Conference on Mechatronics (ICOM'05), 10-12 May, 2005, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Ihsan, Sany Izan and Abd Murat, Noor Azammi (2011) A study of an aftermarket voltage stabilizer for its performance and emission on passengers vehicle. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 60-66. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mohammed Zayan, Jalal (2011) Automotive catalytic converters : current status and some future perspectives. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 80-85. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mohd Sood, Anwar (2011) 3-Cylinder gasoline direct injection as opposed to 4-cylinder multi-port fuel injection for lower fuel consumption and NOX emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 86-91. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2011) Investigation of spark ignition multipoint engine using water addition - Part II: performance and emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 101-108. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2009) Electro-mechanically controlled continuously variable transmission system for passenger cars. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2011) Experimental investigation of the swirl effect on CAMPRO engine using designed swirl adapter. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2011) Investigation of non-precious metals for the development of low cost catalytic converter. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2009) Investigation of the swirl effect on CAMPRO 1.6L engine using GT-SUITE. In: National Tribology Conference 2009, 4-5 May, 2009, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2012) Investigation using simulations for the development of low cost catalytic converter from non-precious metals. Advanced Materials Research, 445. pp. 899-904. ISSN 1662-8985

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2008) Investigation and probable solution of low end torque dip problem of CAMPRO 1.6L Engine. International Journal of Mechanical and Materials Engineering (IJMME), 3 (2). pp. 176-186. ISSN 1823-0334

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2011) Possible solution to smoothen the torque curve of the CAMPRO engine. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2008) Probable solution of torque dip problem of CAMPRO 1.6L engine. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and M. A, Farraen (2008) Investigation of low end torque dip problem of CAMPRO 1.6L engine. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27-29 May 2008, Cairo, Egypt.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Arfah, A, and Farraen, M.A. (2011) Possible solution to smoothen the nature of the torque curve of the CAMPRO engine. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 202-218. ISSN 1745-6444 (O), 1745-6436 (P)

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Gazali, Yazid (2007) Experimental investigation and simulation of muffler performance. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Gazali, Yazid (2007) Simulation and experimental investigation of muffler performance. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2). pp. 118-124. ISSN 1823-0334

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Haw Shin, Yap (2011) Application of Multi-objective Genetic Algorithm (MOGA) for design optimization of valve timing at various engine speeds. Advanced Materials Research, 265. pp. 1719-1724. ISSN 1022-6680

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Mohd Subri, Mohd Dzaidin (2007) Optimal design of automobile exhaust system using GT-power. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 40-47. ISSN 1823-0334

Mohiuddin, A. K. M. and Syafie, Ahmad and Khan, Ahsan Ali (2018) Design and analysis of fuel cell stack for automotive use. International Review of Mechanical Engineering (IREME), 12 (6). pp. 540-547. ISSN 1970-8734 E-ISSN 2532-5655

Mohtasim, Sakib Muhammad and Ahammed, Rubel and Rahman, Md. Mahfujur and Rashid, Muhammad Mahbubur and Roy, Rupal and Abdul Aziz, Mohammad (2021) Recent developments of regenerative magnetorheological (RMR) damper: a review. Korea-Australia Rheology Journal, 33 (3). pp. 201-224. ISSN 1226-119X E-ISSN 2093-7660

Mokashi, Imran and Afzal, Asif and Al-Mdallal, Qasem and Sundar, L. Syam and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Saleel, C Ahamed (2021) Effect of non-conjugate and conjugate condition on heat transfer from the battery pack. Alexandria Engineering Journal, 60. pp. 1-15. ISSN 1110-0168 (In Press)

Mokashi, Imran and Afzal, Asif and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Jilte, Ravindra D. and Samuel, Olusegun David (2020) Nusselt number analysis from a battery pack cooled by different fluids and multiple back-propagation modelling using feed-forward networks. International Journal of Thermal Science. pp. 1-20. ISSN 1290-0729 (In Press)

Munimathan, Arunkumar and Vinayagam, Mohanavel and Afzal, Asif and Thanikodi, Sathish and Manickam, Ravichandran and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Asif, Mohammad (2021) A study on performance and emission characteristics of diesel engine using Ricinus Communis (Castor Oil) Ethyl Esters. Energies, 14 (4320). pp. 1-19. ISSN 1996-1073

N

N. A., Mohd Zubir and Md. Idris, N. H. and Ahmad, Salmiah and Akmeliawati, Rini and Toha, Siti Fauziah and Ibrahim, Babul Salam K.K. and Hassan, M. Kabir (2012) Development of control strategy on segregation of HVAC energy efficiency as non propulsion Electrical Hotel Load in EV. Journal of Engineering. pp. 14-20.

Naing, Lwinthein and Mohd Ghani, Ahmad Shahril and Sahalan, Muhammad Irsyad and Abdul Aziz, Mazlan and Zainal Abidin, Zulkifli and Rashid, Muhammad Mahbubur (2018) Development and fieldwork trial of autonomous surface vehicles for bathymetry mapping. In: 7th IEEE International Conference on Underwater System Technology: Theory and Applications, USYS 2017, 18 - 20 December 2017, Menara Razak, UTM Kuala Lumpur.

Nanda, Nadia Nazieha and Yusoff, Siti Hajar and Midi, Nur Shahida and Badawi, Ahmed Samir Abed (2022) 500W circular coil parameters mathematical design for wireless power transfer with ferrite core. International Journal of Interactive Mobile Technologies (iJIM), 16 (11). pp. 149-160. E-ISSN 1865-7923

Nimir, Yassin Lutfi Mahmud (2011) Comparison between composites reinforced with natural and synthetic fibers : Part I. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 143-150. ISBN 978-967-418-216-8

Nimir, Yassin Lutfi Mahmud (2011) Comparison between composites reinforced with natural fibres and synthetic fibres Part II. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 151-155. ISBN 978-967-418-216-8

Nimir, Yassin Lutfi Mahmud (2011) Production of aluminum-silicon carbide composites using powder metallurgy at sintering temperatures above the aluminum melting point part II. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 138-142. ISBN 978-967-418-216-8

O

Onsa, M.H. and Sapuan, Salit Mohd and Basri, S. B. and Megat Ahmad, Megat Mohamad Hamdan and Maleque, Md. Abdul (2001) Elastohydrodynamic lubrication study of hard rolling contact using boundary element method. Industrial Lubrication and Tribology, 53 (4). pp. 148-154. ISSN 0036-8792

P

Pathan, Khizar A. and Khan, Sher Afghan and Shaikh, Aadil N. and Pathan, Arsalan A. and Khan, Shahnawaz A. (2021) An investigation of boat tail helmet to reduce drag. Advances in Aircraft and Spacecraft Science, 8 (3). pp. 239-250. ISSN 2287-528X E-ISSN 2287-5271

R

Rafia, Afroz and Rahman, Mohammed Ataur (2017) Health impact of river water pollution in Malaysia. International Journal of Advanced and Applied Science, 4 (5). pp. 78-85. ISSN 2313-626X E-ISSN 2313-3724

Rafia, Afroz and Rahman, Mohammed Ataur (2013) Malaysian perception and attitude towards electric vehicle. In: IIUM Enginnering Congress 2013, 2-4 July 2013, Kuala Lumpur, Malaysia.

Rahman, Md. Mustafizur and Mohd. Ihsan, Ahmad Kamal Ariffin and Abdullah, Shahrir and Mat Noor, Muhamad and Abu Bakar, Rosli and Maleque, Md. Abdul (2009) Assessment on surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp. 715-725. ISSN 1554-3641(O), 1546-9239 (P)

Rahman, Mizanur and Rashid, Muhammad Mahbubur and Rahman, Mohammed Ataur and Khan, Sheroz (2016) Resonant-boost LC converter base charge balancing system for electric vehicle. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 362-367. ISSN 1819-6608

Rahman, Mohammed Ataur (2010) Design and development of UrbanConcept car. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Rahman, Mohammed Ataur (2011) Development of a model of of energy efficient hybrid engine towards green technology. International Journal of Electric and Hybrid Vehicles, 3 (2). pp. 138-151. ISSN 1751-4096 (O), 1751-4088 (P)

Rahman, Mohammed Ataur (2011) Electromagnetic actuated CVT system for vehicle. PI20091435.

Rahman, Mohammed Ataur (2017) Intelligent electromagnetic actuated continuously variable transmission System. PI-2017-700857.

Rahman, Mohammed Ataur (2011) Performance investigation of energy efficient hybrid engine towards green technology. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 131-137. ISBN 978-967-418-216-8

Rahman, Mohammed Ataur and Abdul Jaffar, Hassan and Sany, Ihsan (2020) Autonomous electromagnetic continuously variable transmission for electric vehicle. In: 2020 11th IEEE Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON), 4th-7th November 2020, Vancouver, BC, Canada.

Rahman, Mohammed Ataur and Abubakar Hassan, Yusuf Abdi and Aung, Kyaw Myo and Ihsan, Sany Izan (2023) Nano-structured zinc oxide/silicon dioxide thermoelectric generator: a waste heat harvesting technology. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th -10th August 2022, Gombak, Selangor.

Rahman, Mohammed Ataur and Afroz, Rafia (2011) Advanced theory of peat vehicle mobility. VDM Verleg, Germany. ISBN 9783639304329

Rahman, Mohammed Ataur and Ahmed, Helmi and Rafia, Afroz and Alam, A. H. M. Zahirul and Rashid, Muhammad Mahbubur (2013) Development of green transportation system. In: IIUM Enginnering Congress 2013(2-4July 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Asrar, Waqar and Ihsan, Sany Izan and Hossain, Altab and Abdullah, Kassim (2010) Development of a fuel efficient hybrid engine towards green technology. In: International Conference on Sustainable Mobility 2010, 1-3 December 2010, Seri Pacific Hotel Kuala Lumpur.

Rahman, Mohammed Ataur and Aung, Kya Myo (2018) Modelling and simulation of graphene/palladium catalyst reformer for hydrogen generation from the waste of IC engine. IOP Conference Series: Materials Science and Engineering, 290. pp. 2-13. ISSN 1757-899X

Rahman, Mohammed Ataur and Aung, Kyaw Myo and Ihsan, Sany Izan and Raja Ahsan Shah, Raja Mazuir and Al Qubeissi, Mansour and T. Aljarrah, Mohannad (2023) Solar energy dependent supercapacitor system with ANFIS controller for auxiliary load of electric vehicle. Energies, 16 (6). pp. 1-25. ISSN 1996-1073

Rahman, Mohammed Ataur and Aung, Kyaw Myu and Saifullah, Khalid and Rahman, Mizanur (2017) Physics of ZnO/SiO2 electrolyte semi-conductive thermal electric generator. International Journal of Advanced and Applied Sciences, 4 (5). pp. 35-40. ISSN 2313-626X E-ISSN 2313-3724

Rahman, Mohammed Ataur and Azmi , Yahya (2005) Simulated steerability of a segmented rubber tracked vehicle during turning on sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 12 (2). pp. 139-168. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Hassan, Nurul and Ihsan, Sany Izan (2020) Fuzzy adaptive autonomous electromagnetic 2-speed gearbox for electric vehicle. In: Recent Developments in Engineering Research. Book Publisher International, UK, pp. 41-60. ISBN 978­81­949988­1­5

Rahman, Mohammed Ataur and Hawlader, Mohammad Nurul Amin and Khalid, Helmi (2017) Two-phase evaporative battery thermal management technology for EVs/HEVs: theory and control. International Journal of Automotive Technology, 18 (5). pp. 875-882. ISSN 1229-9138 E-ISSN 1976−3832

Rahman, Mohammed Ataur and Hossain, Altab (2011) Design parameters study of an intelligent air-cushion tracked vehicle. Transactions of the Canadian Society of Mechanical Engineering. ISSN 0315-8977 (In Press)

Rahman, Mohammed Ataur and Hossain, Altab (2011) Fuzzy logic traction control system for a golf cart. In: 17th International Conference of the International Society for Terrain-Vehicle Systems, 18- 22 Sept 2011, Blacksburg, Virginia, USA.

Rahman, Mohammed Ataur and Hossain, Altab (2011) Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), xx (xx). ISSN 1741-5152 (O), 1744-232X (P) (In Press)

Rahman, Mohammed Ataur and Hossain, Altab and Rashid, Muhammad Mahbubur (2013) Fuzzy control enerygy efficient hybrid engine for small scale vehicle. Research Journal of Applied Science, Engineering and Technology. ISSN 2040-7467 (In Press)

Rahman, Mohammed Ataur and Ihsan, Sany Izan (2024) AI control-activated carbon-ZnO/CuO conductive polymer structural super-capacitor for EV. International Journal of Ambient Energy, 45 (1). pp. 1-11.

Rahman, Mohammed Ataur and Ihsan, Sany Izan and Momoud, Ali (2023) Palladium/lathanum cobaltite catalyst polymer exchange membrane fuel cell for electric vehicle. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Jaafar, Abdul Hassan (2019) Development of rapid charging system for EV battery. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 292-297. ISSN 2277-3878

Rahman, Mohammed Ataur and Jaafar, Abdul Hassan and Ihsan, Sany Izan (2022) IoT-based electromagnetic actuator for CVT: basic design and prototyping. International Journal of Powertrains, 11 (1). pp. 38-61. ISSN 1742-4267 E-ISSN 1742-4275 (In Press)

Rahman, Mohammed Ataur and Kaw, Myo Aung (2021) Development of solar supercapacitor by utilizing organic polymer and metal oxides for subsystem of EV. Materials Research Express IOP Publishing, 2021 (8). pp. 1-23. ISSN 2053-1591

Rahman, Mohammed Ataur and Kaw, Myo Aung and Afroz, Rafia (2018) Modeling and simulation of Graphene/Palladium catalyst reformer for hydrogen generation from waste of IC engine. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Kyaw, Myo Aung and Rafia, Afroz (2017) Parametric study of palladium/graphene catalyst on-board steam reformer for hydrogen generation from IC engine’s waste. International Journal of Engineering & Technology IJET-IJENS, 17 (1). pp. 13-24. ISSN 2077-1185 E-ISSN 2227-2712

Rahman, Mohammed Ataur and Mohammed, Azri and Kyaw, Myo Aung and Ismail, Ahmad Faris and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2018) Prospect and challenges of electric vehicle adaptability: an energy review Malaysia. Energy Education Science and Technology Part A:Energy Science and Research, 36 (3). pp. 139-151. ISSN 1308-772X

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Intelligent traction control system of an electric golf car: nonlinear dynamics investigation. In: TSME International Conference on Mechanical Engineering 2011, 19 - 21, October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand. (Unpublished)

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam and Ihsan, Sany Izan (2017) Hybrid engine powered city car: fuzzy controlled approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2007) Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2). pp. 189-199. ISSN 1823-0334

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Ismail, Ahmad Faris and Yahya, Azmi (2011) Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS), 18 (3). pp. 227-244. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Noraini, N. and Irwan, I. (2007) Mobility of the LGP-30 wheeled vehicle on peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Nursyifa, S. and Nora, A. and Hidayah, N. and Eshah, J. (2007) A ¼ scale hybrid full-tracked air-cushion vehicle for swamp peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29 - 31 December, 2007, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Irwan, I. and Azoa, A. and Adly, A. (2008) Design and development of an automatic car door opening and locking system. In: 3rd International Conference on Mechatronics, ICOM'08, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Yahya, Azmi and Hossain, Altab (2010) Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics, 47 (1). pp. 45-54. ISSN 0022-4898

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Md Daud, Badrul (2019) Electromagnetic contactless torque transducer: torque measurement and shaft impediment approach. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 298-303. ISSN 2277-3878

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Yahya, Azmi (2008) Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. In: Automotive Engineering Congress, 2008, July 2008, Germany.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Yahya, Azmi (2009) Kinematics model for the wheeled vehicle tractive performance determination on Sepang’s peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 16 (1/2). pp. 225-242. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Nur, Farhana and Hawlader, Mohammad Nurul Alam and Rafia, Afroz (2014) Fuzzy controlled evaporative battery thermal management system for EV/HEV. International Journal of Electric and Hybrid Vehicles (IJEHV), 7. pp. 1-21. ISSN 1751-4088 E-ISSN 1751-4096

Rahman, Mohammed Ataur and Rafia, Afroz and Jaafar, Abdul Hassan (2020) Green transportation system. 1st Edition, 2020 . IIUM Press, International Islamic University Malaysia, Kuala Lumpur. ISBN 978-967-491-021-1

Rahman, Mohammed Ataur and Raja, Ramiz and Rafia, Afroz and Hossain, Altab (2015) Electricity generation from EV body build with Al2O3 filler ER sandwiched by carbon fiber and lithium thin plate. Energy Education Science and Technology Part A: Energy Science and Research , 33 (3). ISSN 1301-8361 (In Press)

Rahman, Mohammed Ataur and Rashid, Muhammad Mahbubur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam (2015) Nano-battery technology for EV-HEV panel: a pioneering study. IIUM Engineering Journal, 16 (2). pp. 57-68. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

Rahman, Mohammed Ataur and Saifullah, Khalid and Sany, Ihsan and Aung, Kyaw Myu and Ismail, Ahmad Faris and Ihsan, Sany Izan (2018) Nano conductive filler polymer towards energy efficient EV: A review. Energy Education Science and Technology Part A: Energy Science and Research, 36 (3). pp. 185-204. ISSN 1308-772X

Rahman, Mohammed Ataur and Sany, Ihsan (2022) Autonomous braking system: automobile use. MIST International Journal of Science and Technology, 9 (December 2021). pp. 1-6. ISSN 2224-2007 E-ISSN 2707-7365

Rahman, Mohammed Ataur and Sany, Ihsan (2020) Development of electro-hydro autonomous parking braking system for electric vehicle. In: Recent Developments in Engineering Research. Book Publisher International, UK, pp. 61-75. ISBN 978-81-949988-1-5

Rahman, Mohammed Ataur and Sany, Ihsan and Ahmad, Faris Ismail (2021) Techno-Economic Analysis of Retrofitted Electric Coaster Introduction in University Campus. In: New Approaches in Engineering Research. B.P International, B P International, Guest House Road, Street no - 1/6, Hooghly, West Bengal, India, pp. 91-108. ISBN 978-93-91882-73-0

Rahman, Mohammed Ataur and Sazzad, Sharif (2013) Fuzzy Logic Controlled Electromagnetic Actuated CVT system for passenger car. In: FISITA 2012, 27-30 November 2012, Beijing, China.

Rahman, Mohammed Ataur and Sazzad, Sharif and Sadakatul, SMS Bari (2011) Fuzzy logic control electromagnetic actuated CVT system. Journal of the Chinese Institution of Engineers, 35. ISSN 0253-3839 (P), 2158-7299 (O) (In Press)

Rahman, Mohammed Ataur and Sharif, Sazzad and Alam, A. H. M. Zahirul and M.M., Rashid (2011) Intelligent electromagnetic actuated CVT system for passenger car. In: IEEE International Conference on Industrial Engineering and Engineering Management, 06-09 Dec 2011, Singapore. (Unpublished)

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Ihsan, Sany Izan (2017) Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X

Rahman, Mohammed Ataur and Yahya, Azmi (2013) Performance investigation of an advanced tracked prime mover on the low bearing soil. Journal of Terramechanics, 50 (4). pp. 230-244. ISSN 0022-4898

Rahman, Mohammed Ataur and Yahya, Azmi and Bardaie, Mohd. Zohadie and Ahmad, Desa and Wan Ismail, Wan Ishak (2005) Design and development of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 12 (3). pp. 239-267. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Yahya, Azmi and Bardaie, Mohd. Zohadie and Wan Ismail, Wan Ishak (2005) Designing framework of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. IIUM Engineering Journal, 6 (1). pp. 1-22. ISSN 1511-788X

Rahman, Mohammed Ataur and Yahya, Azmi and Bardaie, Mohd. Zohadie and Wan Ismail, Wan Ishak (2005) Processes involved in the design of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Vehicle Design (IJVD), 38 (4). pp. 347-378. ISSN 1741-5314 (O), 0143-3369 (P)

Rahman, Mohammed Ataur and Yahya, Azmi and Mohiuddin, A. K. M. (2007) Mobility investigation of a designed and developed segmented rubber track vehicle on Sepang peat terrain in Malaysia. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221. pp. 789-800. ISSN 0954-4070

Rahman, Mohammed Ataur and Yahya, Azmi and Mohiuddin, A. K. M. (2009) Tractive performance of LGP-30 wheeled vehicle during straight motion on Sepang peat terrain in Malaysia. The Open Transportation Journal, 3. pp. 15-28. ISSN 1874-4478

Rahman, Mohammed Ataur and Yahya, Azmi and Zohadie, Mohd. and Wan Ismail, Wan Ishak (2006) Traction mechanics of the designed and developed segmented rubber track vehicle for Sepang peat terrain in Malaysia during turning motion: theoretical and experimental analysis. International Journal of Heavy Vehicle Systems (IJHVS), 13 (4). pp. 324-350. ISSN 1741-5152 (O), 1744-232X (P)

Rashed, Almutairi Saleh and Faris, Waleed Fekry and Fatai, Sado (2019) Fuzzy-based collision avoidance system for autonomous driving in complicated traffic scenarios. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Ul Islam, Rafi (2023) Energy saving capability of variable inertia Magneto-Rheological (MR) flywheel. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei ( Virtual ).

Rashid, Muhammad Mahbubur and Khan, Md. Raisuddin and Husain, M. A. (2009) Development of hybrid control of wheeled robot for mine detection. Proceeding of the 2009 International Conference on Mechanical and Electronical Technology (ICMET'09). pp. 171-175. ISSN 978-079180294-6

Razali, Syazleen and Ab Sani, Jasasikin and Mansor, Mazlina (2019) Auto-City Theme Park, Juru, Penang. The Design Ideal Journal, 1 (2). pp. 20-24.

Ridhuan Siradj , Fadly Jashi Darsivan (2010) Intelligent sliding mode control using natural logarithm sliding surface. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Ridhuan Siradj , Fadly Jashi Darsivan and Faris, Waleed Fekry (2012) Vibration investigation of a quarter car with nonlinear shock absorber model. Advanced Materials Research, 576. pp. 665-668. ISSN 1022-6680

Ridhuan Siradj , Fadly Jashi Darsivan and Hamid, Mohd. Helmi and Abdullah, Mohamad Fahmi (2013) Nonlinear model identification of a shock absorber dynamics. In: Automotive and Vehicle Technologies Conference (AVTECH) 2013, 2-4 Oct 2013, Yildiz Technical University, Istanbul, Turkey. (Unpublished)

Rusli, Farah Zulyana and Ridhuan Siradj, Fadly Jashi Darsivan (2019) The effect of hydraulic damper characteristics on the ride and handling of ground vehicle. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 113-118. ISSN 0277-3878

S

Sajali, Muhammad Fahmi Mohd and Syed, Ashfaq and Aabid, Abdul and Khan, Sher Afghan (2019) Simulation of effect of various distances between front and rear body on drag of a non-circular cylinder. Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 53-65. ISSN 2289-7879

Salam, Syed Munimus and Rashid, Muhammad Mahbubur (2024) Magnetorheological fluid preparation using various carriers and study of their properties with decent durability. Journal of Advanced Engineering and Computation, 8 (2). pp. 86-96. ISSN 1859-2244 E-ISSN 2588-123X

Salami, Momoh Jimoh Eyiomika and Md. Raisuddin, Khan and Aibinu, Abiodun Musa and Md Said, Syahrul Syazanizam and Basrah , Mohd Sofian (2011) Intelligent anti skid control system. In: Mechatronics book series: System design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 75-90. ISBN 9789674181321

Shaikh, Sohel Khalil and Pathan, Khizer Ahmed and Chaudhary, Zakir Ilahi and Marlpalle, B. G. and Khan, Sher Afghan (2020) An investigation of three-way catalytic converter for various inlet cone angles using CFD. CFD Letters, 12 (9). pp. 76-90. ISSN 2180-1363

Sharif, Sazzad and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2013) Study on the development of a fuzzy logic control electromagnetic actuated CVT system. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 217-225. ISSN 1755-9766

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Neck moment characterization of restrained child occupant at realistic nontest standard higher impact speed of 32.2 km/h. International Journal of Vehicular Technology, 2014. pp. 1-8. ISSN 16875702

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Neck moment response characterization of restrained child occupant at standard test impact speed 24.4 km/h. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 113-119. ISSN 2040-7459 E-ISSN 2040-7467

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Parametric study for head injury criteria response of three-year olds in a child restraint system in oblique and lateral intrusive side impact. International Journal of Crashworthiness, 2014. pp. 1-11. ISSN 1358-8265 (Print), 1754-2111 (Online)

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong , Sha Voon (2014) Parameter study of neck force in restrained 3 year old child involved in vehicle side impact. Australian Journal of Basic and Applied Sciences, 8 (9). pp. 145-154. ISSN 1991-8178

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Idres, Moumen and Abdullah, Kassim Abdulrahman and Wong, Sha Voon (2014) Lateral side impact crash simulation of restrained 3 year old child. Applied Mechanics and Materials, 663. pp. 590-595. ISSN 1660-9336

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Response surface approach for sensitivity study of neck forces in restrained child occupant during side-impact crash. In: 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014, 17 May 2014 through 18 May 2014, Tianjin; China.

Siddique, Umair M and Syed, Ashfaq and Khan, Sher Afghan and Meyer, Josua P. (2021) On numerical investigation of heat transfer augmentation of flat target surface under impingement of steady air jet for varying heat flux boundary condition. Journal of Thermal Analysis and Calorimetry. ISSN 1388-6150 E-ISSN 1588-2926

Siddiqui, Mohammad Umair and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2020) Numerical investigation of semi-empirical relation representing nusselt number under waterjet impingement. Journal of Thermophysics and Heat Transfer, 34 (3). pp. 579-590. ISSN 0887-8722

Sidek, Shahrul Na'im and Salami, Momoh Jimoh Emiyoka (2000) Design of intelligent braking system. In: Proceedings TENCON 2000, 24-27 Sept 2000, Kuala Lumpur.

Syed, Syed Ashfaq and Khan, Sher Afghan (2013) Sonic Under Expanded Flow Control With Micro Jets. International Journal of Engineering Research and Application, 3 (6). pp. 1482-1488. ISSN 2248-9622

Syed Mohamed Ali, Jaffar and Abdullah, Kassim Abdulrahman and Aminanda, Yulfian (2013) Effect of cross sectional shape on the energy absorbing characteristics of a tube under quasi-static loading. Applied Mechanics and Materials, 315. pp. 334-338. ISSN 1660-9336

Syed Mohamed Ali, Jaffar and Muhammad Muhaimin, M.Y. and Muhammad Faizal, C.N (2013) Design and development of IIUM hovercraft. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Syed Mohamed Ali, Jaffar and Syed Muhammad, Kashif and Shaik Dawood, Mohd. Sultan Ibrahim and Omar, Ashraf Ali (2014) Study on the effect of window opening on the drag characteristics of a car. International Journal of Vehicle Systems Modelling and Testing, 9 (3-4). pp. 311-320. ISSN 1745-6444 (O), 1745-6436 (P)

T

Toha, Siti Fauziah (2014) Evolutionary low frequency steering vibration control towards human spine. In: The 15th International Conference for Biomedical Engineering, IFMBE Proceedings, 4 - 7 December 2013, Singapore.

Toha, Siti Fauziah (2014) Particle swarm-based vertebrae spine modelling for steering vibration impact analysis. In: The 15th International Conference for Biomedical Engineering, IFMBE Proceedings, 4 - 7 December 2013, Singapore.

Tuan Kamaruddin, Tengku Nordayana Akma and Mat Darus, Intan Z (2012) Neuro-fuzzy identification of an internal combustion engine. International Journal of Simulation Systems, 13 (3B). pp. 30-37. ISSN 1473-804X E-ISSN 1473-8031

Tuan Kamaruddin, Tengku Nordayana Akma and Mat Darus, Intan Zaurah, (2013) PID controller for idle speed control. In: 2013 UKSim 15th International Conference on Computer Modelling and Simulation, 10th-12th April 2013, Cambridge, united KIngdom.

U

Uddin, Farhad and Tripura, Dilip Kumar and Salam, Syed Munimus and Rashid, Muhammad Mahbubur (2023) Performance analysis of different grid substations with demand-side-management-based optimal power usage. Asian Journal of Electrical and Electronic Engineering, 3 (2). pp. 1-9. E-ISSN 2785-8189

Unuh., M. H. and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati and Ismail, Mohamad Amiruddin (2018) Vibration isolation analysis of new design OEM damper for malaysia vehicle suspension system featuring MR fluid. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

V

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2013) Crash kinematics and injury criteria validation for a deformable hybrid vehicle model. Applied Mechanics and Materials, 663. pp. 627-631. ISSN 1660-9336

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Head injury mitigation of an adult and child pedestrian in a frontal vehicle impact using response surface methodology. Applied Mechanics and Materials, 575. pp. 952-955. ISSN 1660-9336 (O), 978-303785262-0 (P)

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2013) Injury analysis validation of a deformable vehicle. Applied Mechanics and Materials, 465/66. pp. 1334-1338. ISSN 1660-9336

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Validation of pedestrian impactor testing upon hybrid vehicle front end profile. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 342-351. ISSN 1745-6444 (O), 1745-6436 (P)

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2015) Vehicle profile optimization using central composite design for pedestrian injury mitigation. Applied Mathematics & Information Sciences, 9 (1). pp. 197-204. ISSN 1935-0090

Venkatason, kausalyah and shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Optimisation of vehicle front-end geometry for adult and pediatric pedestrian protection. International Journal of Crashworthiness. pp. 1-9. ISSN 1358-8265 (Print), 1754-2111 (Online)

W

Warimani, Mahammadsalman and Mahaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Bellary, Sayed Ahmed Imran (2024) Numerical investigation of NOx reduction in a hydrogen-fueled pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 106-117. E-ISSN 2289-7879

Y

Yosri, M. H. and Muhamad, Pauziah and Ismail, Mohamad Amiruddin and Mohd Yatim, Norfazrina Hayati (2018) Air ionizer application for electrostatic discharge (ESD) dust removal in automotive painting industry. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Z

Zainal Abidin, Siti Aisyah and Yusoff, Siti Hajar and Mansor, Hasmah and Mohd Sapihie, Siti Nadiah and Muhamad Fahmi, Muhammad Aqil Muqri (2023) Scheduling of the battery for peak shaving using Model Predictive Control (MPC). In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Zaini, Syasya Azra and Yusoff, Siti Hajar and Abdullah, Amira Aziera and Khan, Sheroz and Abd Rahman, Faridah and Nanda, Nadia Nazieha (2020) Investigation of magnetic properties for different coil sizes of dynamic wireless charging pads for electric vehicles (EV). IIUM Engineering Journal, 21 (1). pp. 23-32. ISSN 1511-788X E-ISSN 2289-7860

Zohary, Aideal Czar and Asrar, Waqar and Aldheeb, Mohammed (2023) A successful microblowing strategy for airfoils. Progress in Computational Fluid Dynamics, 23 (3). pp. 131-145. ISSN 1468-4349 E-ISSN 1741-5233