Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics"

A

A., Shamitha and Crasta, Asha and Pathan, Khizer Ahmed and Khan, Sher Afghan (2023) Analytical and numerical simulation of surface pressure of an oscillating wedge at hypersonic Mach numbers and application of Taguchi's method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 15-30. ISSN 2462-1943

Aabid, Abdul and Khairulaman, Liyana Nabilah Binti and Khan, Sher Afghan (2021) Analysis of flows and prediction of CH10 airfoil for unmanned arial vehicle wing design. Advances in Aircraft and Spacecraft Science, 8 (2). pp. 87-109. ISSN 2287-528X E-ISSN 2287-5271

Aabid, Abdul and Khan, Sher Afghan (2018) Design and fabrication of flying saucer utilizing coanda effect. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Aabid, Abdul and Khan, Sher Afghan (2020) Determination of wall pressure flows at supersonic Mach numbers. Materials Today, 38. pp. 2347-2352. ISSN 2214-7853

Aabid, Abdul and Khan, Sher Afghan and Baig, Muneer (2021) A critical review of supersonic flow control for high-speed applications. Applied Sciences, 11 (6899). pp. 1-26. ISSN 2076-3417

Abd Musthalib, Mohd Aliff and Mansor, Hasmah and Zainal Abidin, Zulkifli (2019) Development of eCall for Malaysia's automotive industries. In: "7th International Conference on Mechatronics Engineering, ICOM 2019", 30 - 31 Oct. 2019, Putrajaya, Malaysia.

Abd Mutalib, Mohd Azri and Zainul Azlan, Norsinnira and Mahmood, Iskandar Al-Thani (2019) Modelling of mobility mechanism for Motorized Adjustable Vertical Platform (MAVeP). In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Abdul, Aabid and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2020) Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. Materials Today: Proceedings, 27 (2). pp. 1713-1719. ISSN 2214-7853

Abdul Muthalif, Asan Gani and Hafiz, Dzairul and Shafiq, Haris (2011) Self-powered solar tracking system part 1: system modeling and hardware selections. In: Mechatronics Book Series: System design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 7-13. ISBN 9789674181321

Abid, Abdul and Khan, Sher Afghan and Baig, Muneer (2022) Numerical analysis of a microjet-based method for active flow control in convergent-divergent nozzles with a sudden expansion duct. Fluid Dynamics & Material Processing, Special Issue (1). pp. 1-24. ISSN 1555-256X E-ISSN 1555-2578

Adebisi, Adetayo A. and Maleque, Md. Abdul (2011) Medelling aspect of corrosive wear under biodiesel. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, Malaysia.

Adebisi, Adetayo A. and Maleque, Md. Abdul and Shah, Qasim Hussain (2011) Surface temperature distribution in a composite brake rotor. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi.

Afzal, Asif and Alshahrani, Saad and Alrobaian, Abdulrahman and Buradi, Abdulrajak and Khan, Sher Afghan (2021) Power plant energy predictions based on thermal factors using ridge and support vector regressor algorithms. Energies, 14 (7254). pp. 1-22. ISSN 1996-1073

Afzal, Asif and Bhutto, Javed Khan and Alrobaian, Abdulrahman and Kaladgi, Abdul Razak and Khan, Sher Afghan (2021) Modeling and computational experiment to obtain optimized neural network for battery thermal management data. Energies, 14 (7370). pp. 1-19. ISSN 1996-1073

Afzal, Asif and Khan, Sher Afghan and Saleel, Ahmed (2019) Role of ultrasonication duration and surfactant on characteristics of ZnO and CuO nanofluids. Materials Research Express, 6 (11). pp. 1-13. ISSN 2053-1591 E-ISSN 2053-1591

Afzal, Asif and Mokashi, Imran and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi (2020) Optimization and analysis of maximum temperature in a battery pack affected by low to high Prandtl number coolants using response surface methodology and particle swarm optimization algorithm. Numerical Heat Transfer, Part A: Applications. ISSN 1521-0634 E-ISSN 1040-7782 (In Press)

Ahmad, Yasser Asrul and Gloyer, Paul and Robinson, Tony and Mignogna, Adeena (2001) Aerobraking to lower apogee in earth orbit with the Small Payload ORbit Transfer (SPORT™) microsatellite vehicle. In: 15th Annual/USU Conference on Small Satellites, 8-9 Sep 2001, Utah.

Ahmed, Fharrukh and Khan, Sher Afghan (2018) Investigation of efficacy of low length-to-diameter ratio and nozzle pressure ratio on base pressure in an abruptly expanded flow. In: 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, 6 - 7 April 2018, Chennai, Tamilnadu; India.

Ahmed, Mohiuddin and Khan, Md. Raisuddin and Billah, Md. Masum and Farhana, Soheli (2010) A novel navigation algorithm for hexagonal hexapod robot. American Journal of Engineering and Applied Sciences, 3 (2). pp. 320-327. ISSN 1941-7020 E-ISSN 1941-7039

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2021) Thermal resistance and pressure drop minimization for a micro-gap heat sink with internal micro-fins by parametric optimization of operating conditions. CFD Letters, 13 (12). pp. 100-112. ISSN 2180-1363

Aibinu, Abiodun Musa and Astuti, Winda and Salami, Momoh Jimoh Emiyoka and Akmeliawati, Rini and Abdul Muthalif, Asan Gani (2011) Earthquake prediction and monitoring using unusual animal behavior. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 134-140. ISBN 9789674181734

Aibinu, Abiodun Musa and Salami, Momoh Jimoh Emiyoka and Abdul Muthalif, Asan Gani and Mior Badri, Sumaiyah and Khalidah, Sarah and Saat, Nuruleeman (2011) Development of experimental station for earthquake prediction. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 109-116. ISBN 9789674181734

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Control of CD nozzle flow using microjets at Mach 2.1. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 631-635. ISSN 2278-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Effects of micro jets on the flow field of the duct with sudden expansion. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 636-640. E-ISSN 2277-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Numerical simulations of a CD nozzle and the influence of the duct length. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 622-630. ISSN 2278-3075

Al Ali, Yousif and Al Kattan, Ibrahim and Hrairi, Meftah (2010) Risk analysis factors of the emission in transportation a case study - Dubai taxi. In: 2nd International Conference on Engineering Systems Management and its Applications (ICESMA2010), 30 March 2010 - 1 Apr 2010 , Dubai, United Arab Emirates.

Alias, Tuti Yasmin and Khalid, Asad A. and Haque, Md. Mohafizul (2004) Tribological (wear) properties of aluminum–silicon eutectic base alloy under dry sliding condition. Journal of Materials Processing Technology, 153/54. pp. 833-838. ISSN 0924-0136

Altaf, A. and Omar, Ashraf and Asrar, Waqar (2022) Passive drag reduction of the square back truck body. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). pp. 9892-9908. ISSN 2229-8649 E-ISSN 2180-1606

Aminanda, Yulfian and Abu Hasan , Hamidah (2011) Experimental study of the strength of sandwich structure with honeycomb core. In: Advances in aircraft structure. IIUM Press, Kuala Lumpur, pp. 101-106. ISBN 978-967-418-148-2

Aminanda, Yulfian and Esa, Mir Amirul Shah and Said Mohamed, Said Hamadi (2011) Design of IIUM aircraft fuselage using composite material. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 1-7. ISBN 978-967-418-148-2

Andan, Amelda Dianne and Asrar, Waqar and Omar, Ashraf Ali E. (2011) Aerodynamics of a hybrid airship. In: 4th International Meeting of Advances in Thermofluids (IMATT 2011), 3-4th October 2011, Hotel Avillion Legacy, Melaka.

Ansari, Emad and Siddiqui, M. Umair and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Ilmi, Abu Bakar (2020) Numerical investigation of mathematical non-dimensional constant representing smoothness in the Nusselt profile. CFD Letters, 12 (6). pp. 16-27. ISSN 2180-1363

Asad Ullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Low-cost base drag reduction technique. International Journal of Mechanical Engineering and Robotics Research (IJMERR), 7 (4). pp. 428-432. ISSN 2315-4462

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Counter clockwise rotation of cylinder with variable position to control base flows. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Asadullah, Mohammed and Khan, Sher Afghan and Rajendran, Parvathy and Sulaeman, Erwin (2021) Design intent of future tunnels. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (2). pp. 50-63. ISSN 2289-7879

Ashfaq, Syed and Khan, Sher Afghan (2014) Experimental studies on low speed converging nozzle flow with sudden expansion. International Journal of Emerging Technology and Advanced Engineering (IJETAE), 4 (1). pp. 532-540. ISSN 2250-2459

Ashfaq, Syed and Khan, Sher Afghan (2013) Studies on flow from convergent nozzle with sudden expansion and control effectiveness under the influence of micro jets. International Journal of Research in Mechanical Engineering & Technology (IJRMET) , 4 (1). pp. 76-87. ISSN 2249-5770 E-ISSN 2249-5762

Ashfaq, Syed and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2013) Active control of flow through the nozzles at sonic Mach number. International Journal of Emerging trends in Engineering and Development (IJETED), 2 (3). pp. 73-80. ISSN 2249-6149

Asrar, Waqar and Aymeric , Goulet and Tristan, Mazou Berges (2012) Passive drag reduction for green design. In: International Conference on Dessign and Concurrent Engineering, 2012, 15-16 October 2012, Melaka.

Awang, Abdul Bari and Mahdie, Imam (2018) Peminangan atau melamar, dan akibatnya menurut hukum Islam serta undang-undang Islam di Indonesia. Fikiran Masyarakat, 6 (2). pp. 77-82. ISSN 2338-512X

B

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Khan, Mohammad Yunus (2012) Effect of area ratio on base pressure in a suddenly expanded duct for under expanded flow ft mach 1.87. International Journal of Mechanical and Industrial Engineering, 2 (2). pp. 86-90. ISSN 2231-6477

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Control of nozzle flow in a suddenly expanded duct with micro jets. International Journal of Engineeing Science and Advance Technology (IJESAT), 2 (4). pp. 789-795. ISSN 2250-3676

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Effect of mach number in a suddenly expanded flow for area ratio 4.84. International Journal of Engineering Research and Application, 2 (4). pp. 593-599. ISSN 2248-9622

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Effect on base pressure in suddenly expanded flows with variable location of microjets. International Journal of Current Research and Review (IJCRR), 4 (16). pp. 1-8. ISSN 2231-2196 E-ISSN 0975-5241

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Experimental investigations on wall pressure in suddenly enlarged ducts at supersonic Mach number regimes. International Journal of Emerging Trends in Engineering and Development (IJETED), 6 (2). pp. 496-504. ISSN 2249-6149

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Studies on suddenly expanded flow at different levels of over expansion for area ratio 3.24. International Journal of Scientific & Engineering Research, 3 (8). pp. 1-6. ISSN 2229-5518

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Wall pressure studies in a suddenly expanded flow for area ratio 2.56”. International Journal of Engineering Research and Application, 2 (5). pp. 1566-1573. ISSN 2248-9622

Bashir, Musavir and Baig, Maughal Ahmed Al and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Control of suddenly expanded flows from correctly expanded and under expanded nozzles at supersonic mach number for area ratio 2.56. IOSR journal of Mechanical & Civil Engineering, 3. pp. 76-82. ISSN 2320-334x E-ISSN 2278-1684

Bashir, Musavir and Khan, Sher Afghan and Udayagiri, Leelanadh and Noor, Asim (2017) Dynamic stability of unguided projectile with 6- DOF trajectory modeling. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 April 2017, Pune, Maharashtra, India.

BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan (2011) Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 219-231. ISSN 1745-6444 (O), 1745-6436 (P)

BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan (2011) Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia.

BenLahcene, Zohir and Faris, Waleed Fekry and Khan, Md. Raisuddin and Ihsan, Sany Izan (2008) Semi-active suspension system for off-road vehicles. In: 3rd International Conference on Mechatronics, ICOM’08, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Boughou, Smail and Omar, Ashraf Ali and Elsayed, Omer Ali and Mohammed Aldheeb, Mohammed Abdulmalek (2023) Numerical investigation on the aerodynamics of high-lift and bird-like low Reynolds number airfoils. Progress in Computational Fluid Dynamics, 23 (3). pp. 146-162. ISSN 1468-4349 E-ISSN 1741-5233

C

Castanie, Bruno and Aminanda, Yulfian and Schwob, Cyrille (2012) Modelling of impact on sandwich structure for fast maintenance loops. In: ICAS 2012 ( International Conference on Aerospace Science 2012, 23 - 28 September 2012, Brisbane Australia. (In Press)

Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Bashir, Musavir and Khan, Sher Afghan (2015) Experimental investigation of the base flow from the nozzles with sudden expansion. International Journal of Applied Engineering Research (IJAER), 10 (92-spc). pp. 208-211. ISSN 0973-4562 E-ISSN 0973-9769

Crasta, Asha and Baig, Maugal Ahmed Ali and Khan, Sher Afghan (2012) Estimation of stability derivatives of a delta wing in hypersonic flow. International Journal of Emerging trends in Engineering and Development (IJETED), 6 (2). pp. 505-516. ISSN 2249-6149

Crasta, Asha and Khan, Sher Afghan (2012) Estimation of stability derivatives of an oscillating hypersonic delta wings with curved leading edges. International Journal of Mechanical Engineering & Technology, 3 (3). pp. 483-492. ISSN 0976-6359

Crasta, Asha and Khan, Sher Afghan (2012) High incidence supersonic similitude for planar wedge. International Journal of Engineering Research and Application, 2 (5). pp. 468-471. ISSN 2248-9622

Crasta, Asha and Khan, Sher Afghan (2012) Oscillating supersonic delta wing with straight leading edges. International Journal of Computational Engineering Research,, 2 (5). pp. 1226-1233. ISSN 2250-3005

Crasta, Asha and Khan, Sher Afghan (2012) Oscillating supersonic delta wings with straight leading edges. International Journal of Computational Engineering Research,, 2 (5). pp. 12028-12035. ISSN 2250-3005

Crasta, Asha and Khan, Sher Afghan (2013) Stability derivatives of a delta wing with straight leading edge in the Newtonian limit. International Journal of Engineering Research and Application, 4 (2). pp. 1482-1488. ISSN 2248-9622

Crasta, Asha and Khan, Sher Afghan (2013) Stabilty derivatives in the newtonian limit. International Journal of Advanced Research in Engineering & Technology (IJARET), 4 (7). pp. 276-289. ISSN 0976-6480

D

De Jager, Johan W. and Jan, Muhammad Tahir (2016) Pre-flight expectations in the air transportation industry of South Africa: A confirmatory factor analytical approach. Actual Problems of Economics, 186 (12). pp. 370-377. ISSN 1993-6788

Diyana, N. H. and Abdul Muthalif, Asan Gani and Fakhzan , M. N. and Nordin, Anis Nurashikin (2012) Vibration energy harvesting using single and comb-shaped piezoelectric beam structures: modeling and simulation. Procedia Engineering, 41. pp. 1228-1234. ISSN 1877-7058

E

Elmoselhy, Salah A.M. and Faris, Waleed Fekry and A. Rakha, Hesham (2014) Experimentally validated analytical modeling of diesel exhaust HC emission rate. Journal of Mechanical Science and Technology, 28 (10). pp. 4139-4149. ISSN 1738-494X E-ISSN 1976-3824

F

Faheem, Mohammad and Kareem Ullah, Mohammad and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Experiment on of nozzle flow with sudden expansion at Mach 1.1. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1769-1775. E-ISSN 2277-3878

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Mohammed Sapardi, Mohd Azan (2021) Estimation of Mach numbers in supersonic jets using schlieren images. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020, Nitte, Karnataka, India.

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Azan M. (2021) Experimental study on the mean flow characteristics of a supersonic multiple jet configuration. Journal of Aerospace Science & Technology, 108 (2021). pp. 1-13. ISSN 1270-9638 E-ISSN 1626-3219

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Mohd Azan Mohammed (2021) Experimental investigation of the effect of cross wire on the flow field of elliptic jet. International Journal of Heat and Fluid Flow, 90 (108834). pp. 1-12. ISSN 0142-727X

Faheem, Mohammed and Rayid, Muneer and Avvad, Mohammad and Aneeque, Mohammad and Khan, Sher Afghan (2021) Influence of microjets on flow development for diameter ratio of 1.6 for correctly expanded nozzles. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME), 22-23 December 2020, Nitte, India.

Faried Hasbullah, Faried Hasbullah and Faris, Waleed Fekry and Ridhuan Siradj , Fadly Jashi Darsivan and Abdelrahman, Mohammad (2015) Ride comfort performance of a vehicle using active suspension system with active disturbance rejection control. International Journal of Vehicle Noise and Vibration, 11 (1). pp. 78-101. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry (2000) Automotive styling methodologies: lecture notes. Self-published. (Unpublished)

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Ride comfort assessment in off road vehicles using passive and semi-active suspension. In: Asia pacific Conference on Defence & Security Technology (DSTC 2009), 6-7 October 2009, Hotel Istana, Kuala Lumpur. (Unpublished)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2008) Analysis of semiactive suspension systems using half-car model. In: FISITA 2008 World Automotive Congress, 14-19 September 2008, Munich, Germany. (Unpublished)

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah A.M. (2014) Impact of intelligent transportation systems on vehicle fuel consumption and emission modeling: an overview. SAE International Journal of Materials and Manufacturing, 7 (1). pp. 129-146. ISSN 1946-3979 E-ISSN 1946-3987

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah A.M. (2014) Supercharged diesel powertrain intake manifold analytical model. International Journal of Vehicle Systems Modelling and Testing, 9 (1). pp. 1-35. ISSN 1745-6436 E-ISSN 1745-6444

Fuad, A. F.M. and Mahmood, Iskandar Al-Thani and Ahmad, Salmiah and Norsahperi, N. M.H. and Toha, Siti Fauziah and Akmeliawati, Rini and Darsivan, Fadly Jashi (2016) Modeling and simulation for heavy-duty mecanum wheel platform using model predictive control. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

G

G M, Fharukh and Khan, Sher Afghan (2019) Control of nozzle flow using microjets at supersonic Mach Regime. International Journal of Engineering, 32 (7). pp. 991-998. ISSN 1025-2495 E-ISSN 1735-9244

G. M, Fharukh Ahmed and Khan, Sher Afghan (2019) Role of active control in increasing base pressure at Sonic Mach Number. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 966-970. E-ISSN 2277-3878

H

Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2013) Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 174-180. ISSN 1755-9766

Hameed, Shihab A. and Abdalla, Shaima and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Daoud, Jamal Ibrahim (2012) Effective car monitoring and tracking model. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 1-8. ISSN 1991-8178

Hameed, Shihab A. and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2011) Automobile monitoring and tracking. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 287-294. ISBN 9789674181611

Hamood, Mostafa A. and Akmeliawati, Rini (2011) Adaptive sliding mode control for 3dof helicopter. In: Mechatronic book series: Control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 85-92. ISBN 9789674181765

Haque, Anwar Ul and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2017) Defining reference area for prediction of aerodynamic coefficients of a biologically inspired hybrid buoyant vehicle. Unmanned Systems, 5 (4). pp. 237-246. ISSN 2301-3850

Haque, Anwar Ul and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Mohamed Ali, Jaffar Syed (2016) A novel technique to neutralize the Yawing moment due to asymmetric thrust in a hybrid buoyant aircraft. In: 10th International Conference on Experimental Fluid Mechanics, EFM 2015, 17-20 November 2015, Kaserstejn PalacePrague; Czech Republic.

Hj. Mohd. Noor, Norzailawati and Rusni, Nur Aulia (2017) The evolution of UAVs applications in urban planning. Coordinates, XIII (6). pp. 36-39. ISSN 0973-2136

Hrairi, Meftah and Ahmed, Mirghani Ishak and Ismail, Ahmad Faris (2010) Mixed-convection heat transfer from simulated air-cooled electronic devices: experimental and numerical study. Journal of Thermophysics and Heat Transfer, 24 (1). pp. 165-172. ISSN 1533-6808 (O), 0887-8722 (P)

Hrairi, Meftah and Zuhudi, Nurul Farahana (2011) Corrosion detection in aircraft structures by ultrasonic method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 45-54. ISBN 978-967-418-148-2

Hrairi, Meftah and Zuhudi, Nurul Farahana (2010) Ultrasonic techniques for detection of thinning defects in metal plates. In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment, 14 - 16 April, 2010, Kuching, Sarawak.

Husnina, Nur and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer and Shaiq, Istiyaq Mudassir (2023) Passive control of base pressure in a converging-diverging nozzle with area ratio 2.56 at mach 1.8. Fluid Dynamics and Manufacturing Process, 19 (3). pp. 569-577. ISSN 1555-256X E-ISSN 1555-2578

I

Idres, Moumen and Okasha, Mohamed Elsayed Aly Abd Elaziz (2019) Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 44-47. ISSN 2277-3837

Idres, Moumen and Okasha, Mohamed Elsayed Aly Abd Elaziz (2019) Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Idres, Moumen Mohammed Mahmoud (2024) Assessment of the range of an electric aircraft. Journal of Advanced Research in Applied Sciences and Engineering Technology, 50 (2). pp. 155-170. E-ISSN 2462-1943

Ihsan, Sany Izan and Farid, Khairussani and Mel, Maizirwan and Mohiuddin, A. K. M. (2011) Analysis of engine performance with enhanced fuel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 147-155. ISBN 9789674181581

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2008) An assessment of semi-active suspension for passenger cars using full-car model. In: The 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME), 27 - 28 May 2008, Cairo, Egypt. (Unpublished)

Ihsan, Sany Izan and Sulaiman , Nabila and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with NGV. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 140-146. ISBN 9789674181581

Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Mansor, Hasmah (2018) Trajectory tracking of quaternion based quadrotor using model predictive control. International Journal of Engineering and Technology (UAE), 7 (4.13). pp. 125-128. ISSN 2227-524X

Ismail, Ahmad Faris and Walvekar , Rashmi Gangasa (2011) Application of nanofluids as coolants in radiator. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 1-13. ISBN 9789670225876

J

Jaafar, Abdul Hassan and Rahman, Mohammed Ataur (2019) Study on the intelligent control system of EMA-CVT. International Journal of Recent Technology and Engineering (IJRTE), 7 (65). pp. 48-53. ISSN 2277-3878

Jaffar, Abdul Hassan and Rahman, Mohammed Ataur (2020) EMA-CVT performance for UDDS and HWFET cycles with fuzzy logic approach. Test Engineering & Management, 83 (March/April). pp. 13775-13781. ISSN 0193-4120

Jaimon, Dennis Quadros and Khan, Sher Afghan and Hanumantharaya, R (2021) Influence of tab corner geometry on supersonic jets. Aircraft Engineering and Aerospace Technology, 92 (3). pp. 1-8. ISSN 0002-2667

Jaimon, Dennis Quadros and Khan, Sher Afghan and Prashanth, T. and Mogul, Yakub Iqbal and Hanumanthraya, R and Abbas, Mohammad and Saleel, Ahamed and Shaik, Saboor (2022) Heat transfer characteristics of fullerene and titania nanotube nanofluids under agitated quench conditions. ACS Omega, 7 (51). pp. 47764-47783. E-ISSN 2470-1343 (In Press)

K

Kafafy, Raed and Hameed, Ammar (2011) Modeling of non-uniform thermoelement devices subject to lateral heat convection. Defect and Diffusion Forum, 312. pp. 782-787. ISSN 1012-0386

Kalamullah, Mohammed and Faris, Waleed Fekry and Hasbullah, Faried and Ghazaly, Nouby M. (2019) Control of using robust H∞ control with genetic algorithm. International Journal of Advanced Science and Technology, 28 (16). pp. 763-782. ISSN 2005-4238

Kaleemullah, Mohammed and Faris, Waleed Fekry and Ghazaly, Nouby M. (2019) Analysis of active suspension control policies for vehicle using robust controllers. International Journal of Advanced Science and Technology, 28 (16). pp. 836-855. ISSN 2005-4238

Kaleemullah, Mohammed and Faris, Waleed Fekry and Hasbullah, Faried and Ghazaly, Nouby M. (2019) Optimization of robust and LQR control parameters for half car model using genetic algorithm. International Journal of Advanced Science and Technology, 28 (16). pp. 792-811. ISSN 2005-4238

Kasemi, Banna and Abdul Muthalif, Asan Gani and Muhammad , Mahbubur Rashid and Fathimah, Sharmila (2012) Fuzzy-PID controller for semi-active vibration control using magnetorheological fluid damper. Procedia Engineering. ISSN 1877-7058 (In Press)

Khalid, A. Hilmi and Rahman, Mohammed Ataur and Hawlader, Mohammad Nurul Alam (2013) Evaporative cooling system for electric vehicles battery pack. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE 16), 2nd-4th July 2013, Kuala Lumpur. (Unpublished)

Khalifa, Othman Omran and Marzuki, Azri A. and Abdul Malik, Noreha and Hassan Gani, Mohammad H. (2020) Traffic congestion detection for smart and control transportation management. In: The 12th National Technical Seminar on Unmanned System Technology 2020 (NUSYS’20), 24th- 25th November 2020, Kuala Lumpur. (Unpublished)

Khalifa, Othman Omran and Moez Khan, Imran and Assidiq, Abdulhakam A. M. (2011) A Hyperbola-pair based road detection system for autonomous vehicles. In: Intelligent Automation and Systems Engineering. Springer Science+Business Media, LLC 2011, pp. 367-377.

Khan, Shaheer Ahmed and Rahman, Mohammed Ataur (2019) Efficiency of thin film photovoltaic paint: a brief review. Blue Eyes Intelligence Engineering & Sciences Publication, 7 (6S). pp. 163-169. ISSN 2277-3878

Khan, Sher and Rathakrishnan, E. (2002) Active control of suddenly expanded flows from overexpanded nozzles. International Journal of Turbo & Jet-Engines, 19 (1-2). pp. 119-126. ISSN 0334-0082 E-ISSN 2191-0332

Khan, Sher Afghan and Aabid, Abdul and Ghasi, Fharukh Ahmed Mehaboobali and Al-Robaian, Abdulrahman and Alsagri, Ali Sulaiman (2019) Analysis of area ratio in a CD nozzle with suddenly expanded duct using CFD method. CFD Letters, 11 (5). pp. 61-71. ISSN 2180-1363

Khan, Sher Afghan and Aabid, Abdul and Mokashi, Imran and Ahmad, Zaheer (2019) Effect of micro jet control on the flow filed of the duct at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1758-1762. E-ISSN 2277-3878

Khan, Sher Afghan and Abid, Abdul and Baig, Maugal Ahmed Ali (2018) CFD analysis of CD nozzle and effect of nozzle pressure ratio on pressure and velocity for suddenly expanded flows. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1147-1157. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Asad Ullah, Mohammed and G M, Fharukh Ahmed and Jalaluddeen, Ahmed and Baig, Maugal Ahmed Ali (2018) Passive control of base drag in compressible subsonic flow using multiple cavity. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4). pp. 39-44. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Chaudhary, Zakir Ilahi and Baig, Maughal Ahmed Ali and Ridwan, R and Chethan, K.M. and Faheem, Mohammed (2022) Experiments on wall pressure at an area ratio 4.84 in a suddenly expanded flow field at supersonic Mach numbers. In: 2nd International Conference on Advanced Research In Mechanical Engineering (2nd ICARME – 21), 29-30 April 2021, Bangalore, India.

Khan, Sher Afghan and Chaudhary, Zakir Ilahi and Shinde, Vilas B. (2018) Base pressure control by supersonic micro jets in a suddenly expanded nozzle. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (4). pp. 101-112. ISSN 2077-124X E-ISSN 2227-2771

Khan, Sher Afghan and Rathakrishnan, E. (2006) Control of suddenly expanded flow. Aircraft Engineering and Aerospace Technology, 78 (4). pp. 293-309. ISSN 0002-2667

Khan, Sher Afghan and Rathakrishnan, E. (2006) Nozzle expansion level effect on a suddenly expanded flow. International Journal of Turbo & Jet-Engines, 23 (4). pp. 233-257. ISSN 0334-0082 E-ISSN 2191-0332

Khan, Sher Afghan and Thakur, Mohammed Asadullah (2017) Estimation of stability derivatives in pitch for an oscillating wedge in hypersonic flow. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khan, Talha Ahmed and Alam, Muhammad and Kadir, Kushairy and Shahid, Zeeshan and Mohd Su'ud, Mazliham and Khan, Sheroz and Miqdad, Mohammad (2018) Foreign objects debris (FOD) identification: a cost effective investigation of FOD with less false alarm rate. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Kharulaman, Liyana and Aabid, Abdul and Mehaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan (2019) Research onFlows for NACA 2412 airfoil using computational Fluid dynamics method. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 5450-5456. ISSN 2249 – 8958

Kumar, S. Senthil and K., Rajan and Vinayagam, Mohanavel and Manickam, Ravichandran and Rajendran, Parvathy and Rashedi, Ahmad and Sharma, Abhishek and Khan, Sher Afghan and Afzal, Asif (2021) Combustion, performance, and emission behaviors of biodiesel fueled diesel engine with the impact of Alumina Nanoparticle as an additive. Sustainability, 13 (12103). pp. 1-20. ISSN 2071-1050

Kurniawan, Syifa and Pebrianti, Dwi (2023) Optimization study of the ratio of bioethanol bioaceton ron 90 on the power and emissions of a 110cc gasoline motor. Asian Journal Science & Technology, 2 (1). pp. 22-30. ISSN 2963-6752

L

Ladipo, Ismail and Abdul Muthalif, Asan Gani (2012) Wideband vibration control in multi degree of freedom system: experimental verification using LabVIEW. Procedia Engineering, 41 (1). pp. 1235-1243. ISSN 1877-7058

Legowo, Ari (2011) Aircraft equations of motion: a linear model. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 63-70. ISBN 9789674181451

Legowo, Ari (2011) Aircraft equations of motion: a non linear model. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 57-62. ISBN 9789674181451

Legowo, Ari (2011) Aircraft rigid-body equation of motions: a non linear model. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 49-56. ISBN 9789674181451

Legowo, Ari and Sulaeman, Erwin and Rosli, Danial (2019) Review on system identification for quadrotor Unmanned Aerial Vehicle (UAV). In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), 26th March-10th April 2019, Dubai, United Arab Emirates.

M

Maidul, Isla and Okasha, Mohamed Elsayed Aly Abd Elaziz and Sulaeman, Erwin (2019) A Model Predictive Control (MPC) approach on unit quaternion orientation based quadrotor for trajectory tracking. International Journal of Control, Automation and Systems, 17 (11). pp. 2819-2832. ISSN 1598-6446 E-ISSN 2005-4092

Maleque, Md. Abdul and Karim, Md. Rezaul (2009) Wear behavior of as-cast and heat treated triple particle size SiC reinforced aluminium metal matrix composites. Industrial Lubrication and Tribology, 61 (2). pp. 78-83. ISSN 0036-8792

Malik, Khurshid and Aldheeb, Mohammad and Asrar, Waqar and Sulaeman, Erwin (2019) Effects of bio-inspired surface roughness on a swept back tapered NACA 4412 wing. Journal of Aerospace Technology and Management, 11. e1719. ISSN 1984-9648 E-ISSN 2175-9146

Mangun, Firdause and Mahmoud Idres, Moumen Mohammed and Abdullah, Kassim Abdulrahman and UNSPECIFIED (2017) Design optimization of a hybrid electric vehicle powertrain. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Mansor, Hafizah and Sharmin, Shaila (2021) In-vehicle network traffic sample dataset. [Copyright] (Unpublished)

Mohamad, Masturah and Othman, Raihan (2011) Contributions of Kerim Kerimov in aerospace engineering. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 110-114. ISBN 978-967-418-157-4

Mohamed Ali, Jaafar Syed and F. Fatin, Bazilah (2014) Mirrorless car: a feasibility study. In: 2nd International Conference on Recent Advances in Automotive Engineering and Mobility Research, ReCAR 2013, 16-18 December 2013, Kuala Lumpur.

Mohamed Ali, Jaffar Syed and Mir Owais, Ali Ibrahim and Miah Mohammed, Riyadh (2019) Educational software for stress analysis of non-idealized closed thin-walled sections. International Journal of Engineering & Technology, 7 (6S). pp. 196-202. E-ISSN 2277-3878

Mohamed Ali Suliman, Suliman Mohamed and Mirghani, Mohamed Elwathig Saeed (2011) Abbas Ibn Firnas's contribution in aviation. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 135-138. ISBN 978-967-418-157-4

Mohammed Riyadh, Miah and Syed Mohamed Ali, Jaffar (2018) A matlab based educational software for the study on the effect of cut-out in aircraft wings. International Journal of Engineering & Technology, 7 (4.25). pp. 114-118. ISSN 2227-524X

Mohd Zakuan, Muhammad Amir Mirza and Aabid, Abdul and Khan, Sher Afghan (2019) Modeling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 6820-6828. ISSN 2249-8958

Mohd Umair, Siddique and Ansari, Emad and Khan, Sher Afghan and Alrobaian, Abdulrahman (2019) On numerical investigation of semi-empirical relation representing development length for a fluid flow in a closed conduit. CFD Letters, 11 (6). pp. 63-71. E-ISSN 2180-1363

Mohiuddin, A. K. M. (2011) 2nd generation IIUM buggy car – Part I: design. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 42-47. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) 2nd generation IIUM buggy car – part II: fabrication. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 48-59. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Development of low cost catalytic converter from non-precious metals. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 123-130. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Faiz, Ali (2011) Comparison of various types of powertrain used in automotive vehicles in terms of performance and emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Zahari, Izzarief and Aiman, Abdullah (2011) Thermodynamic analysis of combustion of CAMPRO CFE engine – part I: simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 109-115. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Zahari, Izzarief and Aiman, Abdullah (2011) Thermodynamic analysis of combustion of CAMPRO CFE engine – part II: combustion analysis. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 116-122. ISBN 978-967-418-216-8

Mokashi, Imran and Afzal, Asif and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Jilte, Ravindra D. and Samuel, Olusegun David (2020) Nusselt number analysis from a battery pack cooled by different fluids and multiple back-propagation modelling using feed-forward networks. International Journal of Thermal Science. pp. 1-20. ISSN 1290-0729 (In Press)

Muhammad , Mahbubur Rashid and Abd Rahim, Nasrudin and Hussain, Mohamed Azlan and Rahman, Md Azizur (2011) Analysis and Experimental Study of Magnetorheological-Based Damper for Semiactive Suspension System Using Fuzzy Hybrids. IEEE Transactions on Industry Applications, 47 (2). pp. 1051-1059. ISSN 0093-9994

Muhammad , Mahbubur Rashid and Abubakar , S. and Tamjis, R. (2011) Modeling of disc rotor induction motor. In: Mechatronics book series: System design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 38-51. ISBN 9789674181321

Muhammed Yusof, Zulkefli and Flint, James A. (2009) Performance metrics for the prediction of link and path availability in VANETs. In: IEEE 9th Malaysia International Conference on Communications, 15 -17 December 2009, Kuala Lumpur, Malaysia.

N

Naing, Lwinthein and Mohd Ghani, Ahmad Shahril and Sahalan, Muhammad Irsyad and Abdul Aziz, Mazlan and Zainal Abidin, Zulkifli and Rashid, Muhammad Mahbubur (2018) Development and fieldwork trial of autonomous surface vehicles for bathymetry mapping. In: 7th IEEE International Conference on Underwater System Technology: Theory and Applications, USYS 2017, 18 - 20 December 2017, Menara Razak, UTM Kuala Lumpur.

Natalia, Friska and Meidia, Hira and Afriliana, Nunik and Al-Kafri, Ala S. and Sudirman, Sud and Simpson, Andrew and Sophian, Ali and Al-Jumaily, Mohammed and Al-Rashdan, Wasfi and Bashtawi, Mohammad (2019) Development of ground truth data for automatic lumbar spine MRI image segmentation. In: IEEE 20th International Conference on High Performance Computing and Communications, 16th IEEE International Conference on Smart City and 4th IEEE International Conference on Data Science and Systems, HPCC/SmartCity/DSS 2018, 28-30 June 2018, Exeter; United Kingdom.

Nimir, Yassin Lutfi Mahmud (2011) Production of aluminium reinforced with SiC particulates using powder metallurgy. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 156-159. ISBN 978-967-418-216-8

Nugroho, Larasmoyo and Akmeliawati, Rini (2018) Comparison of black-grey-white box approach in system identification of a flight vehicle. In: 6th International Seminar of Aerospace Science and Technology (ISAST 2018), 25th-26th Sept. 2018, Jakarta, Indonesia.

O

Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Abdul Ghaffar, Alia Farhana (2018) Satellite attitude tracking control using thrusters and momentum wheels. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Ghaffar, Alia (2019) Satellite attitude tracking control using Lyapunov control theory. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 253-257. ISSN 2277-3878

Okasha, Mohamed Elsayed Aly Abd Elaziz and Islam, Maidul and Sulaeman, Erwin and Legowo, Ari (2018) Evaluation performance of linear quadratic regulator and linear quadratic gaussian controllers on quadrotor platform. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Okasha, Mohamed Elsayed Aly Abd Elaziz and Kamalaldin, Karim (2013) Low earth orbit design for remote sensing applications. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Berjaya Time Square Hotel, Kuala Lumpur. (Unpublished)

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Relative motion modeling and control in a perturbed orbit. In: 21st AAS/AIAA Space Flight Mechanics Meeting, 13–17 February 2011, New Orleans, Louisiana.

Okasha, Mohamed Elsayed Aly Abd Elaziz and maidul, islam and Idres, Moumen (2018) DYNAMICS AND CONTROL OF MINI AERIAL VEHICLE USING MODEL PREDICTIVE CONTROL. Thesis. IIUM, Kuala Lumpur.

Olanrewaju, Rashidah Funke and Rosli, Rafhanah Shazwani and Balogun, Wasiu Adebayo (2016) Autonomous control of tilt tri-rotor unmanned aerial vehicle. Indian Journal of Science and Technology,, 9 (36). pp. 1-7. ISSN 0974-6846 E-ISSN 0974-5645

Omar, Norihan and Md Khalid, Nur Aisyah and Shamsudin, Nor Fadilah and Aminanda, Yulfian (2012) Prediction of energy absorption capability of curved panel structure; for wing leading edge study. Applied Mechanics and Materials, 225. pp. 178-182. ISSN 1660-9336

P

Pakry, Nur Amalina and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2024) Effect of material properties on the behaviour of cross-ply laminated cylindrical shells under thermo-mechanical load. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 51-65. E-ISSN 2289-7895

Pathan, Khizer Ahmed and Dabeer, P S and Khan, Sher Afghan (2018) An investigation to control base pressure in suddenly expanded flows. International Review of Aerospace Engineering (IREASE), 11 (4). pp. 162-169. ISSN 1973-7459 E-ISSN 2533-2279

Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P S (2017) CFD analysis of effect of area ratio on suddenly expanded flows. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 Apr 2017, Pune, Maharashtra, India.

Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P. S. (2017) CFD analysis of effect of flow and geometry parameters on thrust force created by flow from nozzle. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 April 2017, Pune, Maharashtra, India.

Q

Quadros, Jaimon D. and Khan, Sher Afghan and Sapkota, Sanjeev and John, Vikrama and Prashanth, T (2020) On recirculation region length of suddenly expanded supersonic flows, using CFD and fuzzy logic. International Journal of Computational Fluid Dynamics. pp. 1-17. ISSN 1061-8562 E-ISSN 1029-0257 (In Press)

Quadros, Jaimon Dennis and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2023) Modeling and validation of base pressure for aerodynamic vehicles based on machine learning models. Computer Modeling in Engineering & Sciences, 137 (3). pp. 2331-2352. ISSN 1526-1492 E-ISSN 1526-1506

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2018) Study of base pressure behavior in a suddenly expanded duct at supersonic mach number regimes using statistical analysis. Journal of Applied Mathematics and Computational Mechanics, 17 (4). pp. 59-72. ISSN 2299-9965 E-ISSN 2353-0538

R

Rafia, Afroz and Rahman, Mohammed Ataur and Muhib, Md. Muhibbullah and Morshed, Niaz (2019) Malaysian automobile industry and green supply chain management. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 158-162. ISSN 2277-3878

Rahman, Mohammed Ataur (2017) Graphene-Palladium catalysed exhaust gas reformer system. PI 2017704023.

Rahman, Mohammed Ataur (2017) Thermoelectric technology for IC engine waste energy harvesting:
liquid cooling approach. International Journal of Scientific and Engineering Research, 7 (11). pp. 1-12. ISSN 2229-5518 (In Press)

Rahman, Mohammed Ataur and Amsyar, Mohamad and Ihsan, Sany Izan and Mohiuddin, A. K. M. (2018) Electro-hydro-mechanical braking system for passenger vehicle. Journal of Applied Science, 2018. pp. 1-9. ISSN 1812-5654 E-ISSN 1812-5662 (In Press)

Rahman, Mohammed Ataur and Aung, Kyaw Myo and Ihsan, Sany Izan and Raja Ahsan Shah, Raja Mazuir and Al Qubeissi, Mansour and T. Aljarrah, Mohannad (2023) Solar energy dependent supercapacitor system with ANFIS controller for auxiliary load of electric vehicle. Energies, 16 (6). pp. 1-25. ISSN 1996-1073

Rahman, Mohammed Ataur and Hasan, MD Nurul and Zaki, Mohd (2020) Modeling and validation of electric vehicle drive line architectureusing bond graph. Test Engineering and Management, 82 (January - February 2020). 15154 -15167. ISSN 0193 - 4120

Rahman, Mohammed Ataur and Kaw, Myo Aung and Ahmed Khan, Shaheer (2020) Organic photoelectric-supercapacitor power source of electric vehicle. Test Engineering and Management, 82. 15175 -15182. ISSN 0193-4120

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Yahya, Azmi (2009) Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. The Open Mechanical Engineering Journal (3). pp. 63-71. ISSN 1874-155X

Rahman, Mohammed Ataur and Nurul, Hassan (2022) Autonomous electromagnetic two-speed gearbox for electric vehicle. International Journal of Automotive Technology, 20 (4). xxx-xxx. ISSN 1229-9138 E-ISSN 1976-3832 (In Press)

Rahman, Mohammed Ataur and Razzak, Fadhilah and Rafia, Afroz and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam (2015) Power generation from waste of IC engines. Renewable and Sustainable Energy Reviews, 51. pp. 382-395. ISSN 1364-0321

Rahman, Mohammed Ataur and Sany, Ihsan (2022) Autonomous braking system: automobile use. MIST International Journal of Science and Technology, 9 (December 2021). pp. 1-6. ISSN 2224-2007 E-ISSN 2707-7365

Rahman, Mohammed Ataur and Sany, Ihsan and Hassan Bakri, Nurul Huda (2022) A fuzzy-logic-controlled two-speed electromagnetic gearbox for electric vehicles. International Journal of Technology : IJTech, 13 (2). pp. 297-309. ISSN 2087-2100

Rahman, Mohammed Ataur and Sany, Ihsan and Rashid, Muhammad Mahbubur and Ismail, Ahmad Faris (2019) Prototype of electromagnetic actuator for continuously variable transmission for passenger car. Research Report. UNSPECIFIED. (Unpublished)

Rahman , M.M. and Hamada, Khalaf I and Noor, M.M. and Bakar, Rosli A. and Kadirgama, K. and Maleque, Md. Abdul (2008) Finite element based fatigue life prediction of cylinder head for two-stroke linear engine using stress-life approach. Journal of Applied Sciences, 8 (19). pp. 3316-3327. ISSN 1812-5662 (O), 1812-5654 (P)

Rashed, Almutairi Saleh and Faris, Waleed Fekry and Fatai, Sado (2019) Fuzzy based obstacle avoidance system for autonomous mobile robot. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Razali, Syazleen and Ab Sani, Jasasikin and Mansor, Mazlina (2019) Auto-City Theme Park, Juru, Penang. The Design Ideal Journal, 1 (2). pp. 20-24.

Rehman, Shafiqur and Khan, Sher Afghan (2008) Control of base pressure with micro jets:part-I. Aircraft Engineering and Aerospace Technology, 80 (2). pp. 158-164. ISSN 0002-2667

Ruslam, Muhammad U.H. and Ridhuan Sirad, Fadly Jashi Darsivan (2019) Parametric study of ground vehicle suspension system. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 284-287. E-ISSN 2277-3878

S

Saeed S, Almehmadi Tarig and Htike@Muhammad Yusof, Zaw Zaw (2015) Automatic vehicle classification system. International Journal of Applied Engineering Research, 10 (8). pp. 19633-19646. ISSN 0973-4562

Saeed S, Almehmadi Tarig and Htike@Muhammad Yusof, Zaw Zaw (2016) Vehicle classification system using viola Jones and multi-layer perceptron. International Arab Journal of Information Technology, 13 (Special Issue 2016, No. 6A). pp. 965-971. ISSN 0973-4562

Salleh, Hafiz and Saharin, Sanisah and Azmi, Mohammad Hanafi and Khan, Sher Afghan (2018) Fluid-structure interactions of variable span wings in low Reynold flows. International Journal of Engineering & Technology, 7 (3.29). pp. 381-385. ISSN 2227-524X

Senan, Shayma and Hassan Abdalla Hashim, Aisha and Saeed, Rashid Abdelhaleem and Daoud, Jamal Ibrahim (2011) Evaluation of nested network mobility approaches. Journal of Applied Sciences, 11 (12). pp. 2244-2249. ISSN 1812-5662 (O), 1812-5654 (P)

Sethuraman, Vigneshvaran and Khan, Sher Afghan (2018) Base pressure control using micro-jets in supersonic flow regimes. International Journal of Aviation, Aeronautics, and Aerospace, 5 (1). pp. 1-26. ISSN 2374-6793

Shabana, Aysha and Crasta, Asha and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2022) Computation of stiffness and damping derivatives of an Ogive in a limiting case of mach number and specific heat ratio. Fluid Dynamics & Materials Processing, 23 (3). pp. 1-19. ISSN 1555-256X E-ISSN 1555-2578

Shah, Jawad and Okasha, Mohamed and Faris, Waleed Fekry (2018) Gain scheduled integral linear quadratic control for quadcopter. International Journal of Engineering and Technology, 7 (4.13 (Special issue 13)). pp. 81-85. ISSN 2227-524X

Shaheer, Ahmed Khan and Zakaria, Mohammed Zain and Mansoor, Mohammad and Hasan Mahfuz, M.M. and Rahman, Mohammed Ataur and Noor Rashid, Mir Akmam and Rais, Mohammad Salman (2021) Performance investigation of ZnO/PVA nanocomposite film for organic solar cell. Materials Today:Proceedings, 46 (9). xx-xx. ISSN 2214-7853

Shaikh, Javed S and Kumar, Krishna and Pathan, Khizer Ahmed and Khan, Sher Afghan (2022) Analytical and computational analysis of pressure at the nose of a 2D wedge in high-speed flow. Advances in Aircraft and Spacecraft Science, 9 (2). pp. 119-130. ISSN 2287-528X E-ISSN 2287-5271

Sidek, Shahrul Na'im and Ab Aziz, Mohammad Afhamuddin (2011) Design and development of intelligent wiper for vehicle windshield: electrical design. In: Mechatronis book series: system design and signal processing. IIUM Press, Kuala Lumpur, pp. 63-67. ISBN 9789674181743

Sidek, Shahrul Na'im and Ibrahim, Abd Rahman (2011) Design and development of intelligent wiper for vehicle windshield: final assembly and results. In: Mechatronic book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 68-72. ISBN 9789674181734

Sidek, Shahrul Na'im and Ibrahim, Abd Rahman (2011) Design and development of intelligent wiper for vehicle windshield: mechanical design. In: Mechatronic book series: system design and signal processing. IIUM Press, Kuala Lumpur, pp. 58-62. ISBN 9789674181734

Sidek, Shahrul Na'im and M Khalil, A. Mushawwir and Mokhtar, M. Ismail (2011) Development of unmanned aerial vehicle – Part 2. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 129-133. ISBN 9789674181734

Sidek, Shahrul Na'im and Mokhtar, M. Ismail and M Khalil, A. Mushawwir (2011) Development of unmanned aerial vehicle – Part 1. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 123-128. ISBN 9789674181734

Sidek, Shahrul Na'im and Mokhtar, Mohd Ismail and Mohamad Khalil, Abdul Mushawwir (2010) Affordable unmanned aerial vehicle aircraft for surveillance. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Sidek, Shahrul Na'im and Sarkar, Nilanjan (2009) Dynamic modeling and control of nonholonomic wheeled mobile robot: when subjected to wheel slip. VDM Verlag, Verlag. ISBN 9783639139150

Sidek, Shahrul Na'im and Zakaria, M. Iqbal and A. Aziz, A. Ridwan (2011) Electrooculograghy (EOG)-controlled wheelchair. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 149-154. ISBN 9789674181734

Sulaeman, Erwin (2011) Alternate approximate function for kernel function of planar oscillating lifting surfaces. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 146-151. ISBN 9789674181451

Sulaeman, Erwin (2011) Application of the aerodynamic discrete element methods. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 180-186. ISBN 9789674181451

Sulaeman, Erwin (2011) Expansion series of continuous function using analytical integration of least square regression. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 140-145. ISBN 9789674181451

Sulaeman, Erwin (2011) Formulation of kernel function for aerodynamic loading on air vehicle. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 105-110. ISBN 9789674181451

Sulaeman, Erwin (2011) Improved doublet lattice method. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 176-179. ISBN 9789674181451

Sulaeman, Erwin (2011) Improved doublet point method. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 168-175. ISBN 9789674181451

Sulaeman, Erwin (2011) Improved vortex lattice method. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 162-167. ISBN 9789674181451

Sulaeman, Erwin (2011) Numerical evaluations of hypergeometric cylindrical functions. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 117-122. ISBN 9789674181451

Sulaeman, Erwin (2011) Translation of axis procedure to construct stiffness matrix. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 83-87. ISBN 9789674181451

Sulaeman, Erwin (2011) Unsteady aerodynamic theory of lifting surface. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 111-116. ISBN 9789674181451

Sulaeman, Erwin and Abdullah, Nur Azam and Kashif, Syed Muhammad (2017) Aeroelastic passive control optimization of supersonic composite wing with external stores. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Sulaiman, Nabila and Ihsan, Sany Izan and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with NGV. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-20 May, 2011, Legend Hotel, Kuala Lumpur, Malaysia.

Syed Mohamed Ali, Jaffar and Ali, Mir Owais and Riyadh, Miah Mohammed (2018) Educational software for stress analysis of non-idealized closed thin-walled sections. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Syed Mohamed Ali, Jaffar and M. Saleh, Mubin (2019) Experimental and numerical study on the aerodynamics and stability characteristics of a canard aircraft. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 165-174. ISSN 2289-7879

Syed Mohamed Ali, Jaffar and M.J.A ., Muhammad Nazri (2024) Optimization of composite fuselage frame layup for energy absorption under crash loading. Journal of Advanced Research in Applied Mechanics, 122 (1). pp. 111-129. E-ISSN 2289-7895

Syed Mohamed Ali, Jaffar and Nur Fadhila, Hasna and Makame, Burhani and Riyadh, Miah Mohammed (2018) Educational software for stress analysis of idealized closed thin walled sections. In: International Conference on Aviation Technology and Management (ICATEM2018), 12th-14th Sept. 2018, Kuala Lumpur. (Unpublished)

Syed Mohamed Ali, Jaffar and Omar, Ashraf Al and Nasikin, Mohd Faiz Diuzzaman (2018) Numerical and experimental study on the effect of cab-extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, xx (xx). pp. 1-8. ISSN 2289-7879 (In Press)

Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali and Nasikin, Mohd Faiz Diuzzaman (2019) Numerical and experimental study on the effect of cab- extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 61-68. ISSN 2289-7879

Syed Mohamed Ali, Jaffar and Khan, Md. Raisuddin and Hamid, Md.Tarique (2011) Structural analysis of an active beam. In: Advances in aircraft structure. IIUM Press, Kuala Lumpur, pp. 125-130. ISBN 978-967-418-148-2

T

Tijani, Ismaeel and Akmeliawati, Rini and Legowo, Ari and Budiyono, Agus and Asan Gani, Abdul Muthalif (2011) H∞ robust controller for autonomous helicopter hovering control. Aircraft Engineering and Aerospace Technology, 83 (6). ISSN 0002-2667

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Computer communication for a smart card based ordering system via visual basic. In: Mechatronics book series: system design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 52-58. ISBN 9789674181321

Toha, Siti Fauziah and Haja Mohideen, Mohammad Zafran (2011) A smart car surveillance system using Programmable Logic Controller (PLC). In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 121-127. ISBN 9789674181765

Toha, Siti Fauziah and Tokhi, M. O. (2010) Augmented feedforward and feedback control of a twin rotor system using real-coded MOGA. In: 2010 IEEE Congress on Evolutionary Computation (CEC), 18-23 July 2010, Barcelona.

Tun Ahmad Merahuddin, Tun Nurhanis and Khan, Ambareen and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2023) Control of base pressure at supersonic mach number in a suddenly expanded flow. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (1). pp. 210-225. ISSN 2289-7879

Turahim, Khairiah K. and Abdul Muthalif, Asan Gani and A. Rahim, Syazwani (2012) Design and development of active vibration isolation system for free space optics communication. Advanced Materials Research. ISSN 1022-6680 (In Press)

U

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf A. and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Aerodynamics and Static Stability Characteristics of a Hybrid Buoyant Aerial Vehicle at Low Speed. In: 62nd Canadian Aerospace Institute Conference (Aero 2015), 19 - 21 May 2015, Montreal, Canada. (In Press)

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2016) Comparison of data correction methods for blockage effects in semispan wing model testing. In: "10th International Conference on Experimental Fluid Mechanics, EFM 2015", 17-20 November 2015, Kaserstejn PalacePrague; Czech Republic.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Hydrostatic and hydrodynamic characteristics of swimming animals: an inspiration for hybrid buoyant aircraft. In: 4th International Scientific Conference on Applied Sciences and Engineering (4 thISCASE-2015), 3rd-4th Oct. 2015, Langkawi, Malaysia.

Unuh., M. H. and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati and Ismail, Mohamad Amiruddin (2018) Vibration isolation analysis of new design OEM damper for malaysia vehicle suspension system featuring MR fluid. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

V

Venkatason, Kausalyah and Abdullah, Kassim Abdulrahman and Shasthri, Sevaguru and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Injury analysis validation of a deformable vehicle front end model. Applied Mechanics and Materials, 465-66. pp. 1334-1338. ISSN 1660-9336

W

Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Study of feasibility of pulse detonation engine powered by alternative fuels. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 291-296. ISSN 2249–8958

Y

Yashodhar, V. and Humrutha, G. and Kaushik, M. and Khan, Sher Afghan (2017) CFD studies on triangular micro-vortex generators in flow control. IOP Conference Series: Materials Science and Engineering, 184 (1). 012007-1. ISSN 1757-8981

Yosri, M. H. and Muhamad, Pauziah and Ismail, Mohamad Amiruddin and Mohd Yatim, Norfazrina Hayati (2018) Air ionizer application for electrostatic discharge (ESD) dust removal in automotive painting industry. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Yu, Tian and Sidek, Shahrul Na'im and Sarkar , Nilanjan (2010) Tracking control for nonholonomic wheeled mobile robot with wheel slip dynamics. In: Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009, 12-14 October 2009, Hollywood.

Z

Zainol, Zakariya and Toha @ Tohara, Siti Fauziah and Kamisan, Nor Azam and Bukhari, W. M.S.W. (2019) Design and development of a retrofit electric motorbike. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 71-75. E-ISSN 2277-3878

Zakaria, Abd Hafiz and Mohd Mustafah, Yasir and Abdullah, Jaafar and Alang Rashid, Nahrul Khair and Abdullah, Taufiq (2017) Development of autonomous radiation mapping robot. In: IEEE International Symposium on Robotics and Intelligent Sensors, IRIS 2016, 17 - 20 December 2016, Hosei UniversityTokyo; Japan.

Zakaria, Mohd Hafizu and Aminanda, Yulfian and Ahmad Rashidi, Syazwan and Mohamed Shah @ Mat Sah, Mohamed Sallauddin (2018) Spring-back of thick uni-directional carbon fibre reinforced composite laminate for aircraft structure application. In: 5th International Seminar on Aerospace Science and Technology (ISAST 2017), 27th-29th Sept. 2017, Medan, North Sumatra; Indonesia.

Zakaria, Mohd Sharif and Abas, Mohammad Fadhil and Dg Jamil, Fatimah and Mohd Saad, Norhafidzah and Hashim, Addie Irawan and Pebrianti, Dwi (2024) Detecting problematic vibration on unmanned aerial vehicles via genetic-algorithm methods. In: 20th International Colloquium on Signal Processing & Its Applications (CSPA 2024), 1st - 2nd March 2024, Langkawi, Malaysia.