Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA170 Environmental engineering. Sustainable engineering"

Article

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan (2019) Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions. Journal of Materials Research and Technology, 8 (5). pp. 4347-4353. ISSN 2238-7854

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi (2012) The effect of cryogenic application on surface integrity in manufacturing process: A review. Journal of Applied Sciences Research, 8 (10). pp. 4880-4890. ISSN 1819-544X

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi and Abdul Hadi, Musfirah (2016) Temperature at the tool-chip interface in cryogenic and dry turning of AISI 4340 using carbide tool. International Journal of Simulation Modelling, 15 (2). pp. 201-212. ISSN 1726-4529

Abdul Majid, Zafri Azran and Junet, Laila Kalidah and Hazali, Norazlanshah and Abdullah, Abdul Adam and Megat Hanafiah, Megat Ahmad Kamal (2013) Variable filtered photographic film as a radiation detector for environmental radiation monitoring. AIP Conference Proceedings, 1528 (1). pp. 123-128. ISSN 0094-243X

Abdul Razak, Nur Humairah and Ahmad, Zuraida and Sarifuddin, Norshahida and Z.S., Naqiah (2014) Characterizations of thermoplastic starch and starch reinforced montmorillonite clay nanocomposite. Advances in Environmental Biology, 8 (3). pp. 792-796. ISSN 1995-0756 E-ISSN 1998-1066

Abdulbaqi, Al Khabouri and Muyibi, Suleyman Aremu and Ahmed M. , Thamer and Kabbashi, Nassereldeen Ahmed (2007) Integrated water resource management plan (IWRMP) in Oman: way forward. Water Policy, 9. pp. 457-473. ISSN 1366-7017

Abdullah, Norizan and Zainudin, Zaki and Abdul Rahman, Norazah and Mazlan, Nurul Fadillah (2011) Specialization of biochemical oxygen demand for surface water and wastewater. Journal of Applied Sciences, 11 (13). pp. 2460-2463. ISSN 1812-5654 (P)

Abdullah, Nur Azam (2021) Segerakan penggantian Hawk tingkat keupayaan aset TUDM. Berita Harian, 29 November 2021. p. 12.

Abu Bakar, Aniza and Abdul Malek, Nurhayati (2016) Thermal performance of outdoor tropical environment. International Journal of Energy and Environment, 10. pp. 41-51. ISSN 2308-1007

Abu Mansor, Abdul Muaz and Kasim, Norhidayu and Abu Taib, Kamarudin and Wan Azahar, Wan Nur Aifa and Ahmad Tajuddin, Husna (2021) Empirically based rainfall threshold for landslides occurrence in Cameron Highlands, Malaysia. Civil Engineering and Architecture, 8 (6). pp. 1481-1490. ISSN 2332-1091 E-ISSN 2332-1121

Abu Mansor Maturidi, Abdul Muaz and Kasim, Norhidayu and Abu Taib, Kamarudin and Wan Azahar, Wan Nur Aifa and Ahmad Tajuddin, Husna (2021) Empirically based rainfall threshold for landslides occurrence in peninsular Malaysia. KSCE Journal of Civil Engineering. pp. 1-15. ISSN 1226-7988 E-ISSN 1976-3808

Ahmad, Arfah Juneena and Ayob, Mohd Fairullazi (2023) Flood mitigation management practice: a comparison between stormwater management road tunnel (SMART) and sponge city methods. Journal of Project Management Practice, 3 (2). pp. 1-17. E-ISSN 2805-4768

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2016) Evaluation of oil production from oil palm empty fruit bunch by oleaginous micro-organisms. Biofuels, Bioproducts and Biorefining, 10 (4 (July-August)). pp. 378-392. ISSN 1932-1031

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2015) A multi-criteria analysis approach for ranking and selection of microorganisms for the production of oils for biodiesel production. Bioresource Technology, 190. pp. 264-273. ISSN 0960-8524

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2019) The outlook of the production of advanced fuels and chemicals from integrated oil palm biomass biorefinery. Renewable and Sustainable Energy Reviews, 109. pp. 386-411. ISSN 1364-0321

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2019) The prospect of microbial oil production and applications from oil palm biomass. Biochemical Engineering Journal, 143. pp. 9-23. ISSN 1369-703X

Ahmad, Mahmood and Al-Mansob, Ramez and Jamil, Irfan and Al-Zubi, Mohammad A. and Sabri, Mohanad Muayad Sabri and Alguno, Arnold C. (2022) Prediction of rockfill materials’ shear strength using various kernel function-based regression models—a comparative perspective. Materials, 15 (5). pp. 1-15. E-ISSN 1996-1944

Al-Khatib, Ma An Fahmi Rashid and Alam, Md Zahangir and Shabana, Haytham (2015) Isolation of bacterial strain for biodegradation of fats, oil and grease. Malaysian Journal of Analytical Sciences (MJAS), 19 (1). pp. 138-143. ISSN 1394-2506

Al-Khatib, Ma An Fahmi Rashid and Alqedra, Fadi I. A. and Alam, Md Zahangir (2023) Biodegradation of fats, oil and grease using microorganisms isolated from palm oil mill effluent. IIUM Engineering Journal, 24 (2). pp. 1-10. ISSN 1511-788X E-ISSN 2289-7860

Al-Mamun, Abdullah and Hashim, Alias and Amir, Zalin (2012) Regional Statistical Models for the Estimation of Flood Peak Values at Ungauged Catchments: Peninsular Malaysia. Journal of Hydrologic Engineering, 17 (4). ISSN 1084-0699 (P) ; 1943-5584 (O) (In Press)

Alam, Md Zahangir and Khan, Mohammad Jakir and Kabbashi, Nassereldeen Ahmed and Abu Sayem, S. M. (2018) Development of an effective biosorbent by fungal immobilization technique for removal of dyes. Waste Biomass Valorization, 9 (1). pp. 681-690. ISSN 1877-2641 E-ISSN 1877-265X

Allujami, Hamzeh Marwan and Abdulkareem, Muyideen and Jassam, Taha M. and Al-Mansob, Ramez A. and Jing, Lin Ng and Ibrahim, Azmi (2022) Nanomaterials in recycled aggregates concrete applications: mechanical properties and durability. A review. Cogent Engineering, 9. ISSN 2331-1916

Amin, Mohammad Mehdi and Taheri, Ensiyeh and Ghasemian, Mohammad and Mohamad Puad, Noor Illi and Dehdashti, Bahare and Fatehizadeh, Ali (2020) Proposal of upgrading Isfahan north wastewater treatment plant: An adsorption/bio-oxidation process with emphasis on excess sludge reduction and nutrient removal. Journal of Cleaner Production, 255. pp. 1-12. ISSN 0959-6526

Arab, Sonia Hadj and Alam, Md. Zahangir and Yusof, Faridah and Elgharbawy, Amal A.M. (2023) Optimization and characterization of free and cross-linked enzymes aggregate from solid-state fermented materials. Biological and Natural Resources Engineering Journal, 7 (1). pp. 43-57. E-ISSN 2637-0719

Baharudin, Izzaty Syahirah and Mohamed Noor, Noraini and Othman, Raihan and Chan Abdullah, Ezzat and Mujawar, Mubarak N. (2022) Magnetically modified sugarcane bagasse biochar as cadmium removal agent in water. IIUM Engineering Journal, 23 (1). pp. 294-309. ISSN 1511-788X E-ISSN 2289-7860

Benoudjit, Abdel Mohsen and Abdul Guthoos, Habibah Farhana and Arris, Farrah Aida and Wan Salim, Wan Wardatul Amani (2017) Pedot: PSS–modified platinum microelectrodes for measurements in aqueous media: Effect of polymer surface area on long-term anodic peak current stability. IIUM Engineering Journal, 18 (2). pp. 11-15. ISSN 1511-788X E-ISSN 2289-7860

Benoudjit, Abdel Mohsen and Bader, Mamoun M. and Wan Salim, Wan Wardatul Amani (2018) Study of electropolymerized PEDOT:PSS transducers for application as electrochemical sensors in aqueous media. Sensing and Biosensing Research, 17. pp. 18-24. ISSN 2214-1804

Beroual, Sabir and Hrairi, Meftah (2023) Electromechanical impedance simulation-based evaluation of cracks in photovoltaic solar cells. Arabian Journal for Science and Engineering. pp. 1-17. ISSN 2193-567X E-ISSN 2191-4281

Beroual, Sabir and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati and Shaik Dawood, Mohd. Sultan Ibrahim (2024) Solar cell micro crack detection technique using electromechanical impedance and finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (8). pp. 3531-3548. ISSN 0954-4062 E-ISSN 2041-2983

Dalman, Masoud and Salleh, Elias and Sapian, Abdul Razak and Saadatian, Omidreza (2013) Thermal comfort investigation in traditional and modern urban canyons in Bandar Abbas, Iran. Pertanika Journal of Social Science & Humanities, 21 (4). pp. 1491-1515. ISSN 0128-7702

Ehteram, Mohammad and Banadkooki, Fatemeh Barzegari and Fai, Chow Ming and Moslemzadeh, Mohsen and Sapitang, Michelle and Ahmed, Ali Najah and Irwan, Dani and El-Shafie, Ahmed (2021) Optimal operation of multi-reservoir systems for increasing power generation using a seagull optimization algorithm and heading policy. Energy Reports, 7. pp. 3703-3725. ISSN 2352-4847

Embong, Abd Halim and Mohd Nor, Firdaus and Abdul Hamid, Syamsul Bahrin (2023) Optimizing mist-based ablution: a comprehensive study of water distribution and conservation using watercolour visualization and Thermal Imaging Techniques. International Journal of Integrated Engineering. ISSN 2229-838X E-ISSN 2600-7916

Emir Aslam, Thopatalam and Benoudjit, Abdel Mohsen and Nasteho, Ali and Ismail, Nur Alya Batrisya and Wan Salim, Wan Wardatul Amani (2018) Effectiveness of multi-walled carbon nanotubes and activated carbon for capturing E. coli 0157:H7 for application in water filtration. Journal of Engineering and Applied Sciences, 13 (10). pp. 3582-3586. ISSN 1816-949x E-ISSN 1818-7803

Engliman, Nurul Sakinah and Mohamed Abdul, Peer and Shu-Yii, Wu and Md Jahim, Jamaliah (2017) Influence of iron (II) oxide nanoparticle on biohydrogen production in thermophilic mixed fermentation. International Journal of Hydrogen Energy, 42 (45). pp. 27482-27493. ISSN 0360-3199

Eusuf, Muhammad Abu and Hasan, Abdullah Al (2013) Study the heat sink potential of building ground floor slab integrated with ELT. Applied Mechanics and Materials, 268-70. pp. 967-973. ISSN 1660-9336

Eusuf, Muhammad Abu and Hasan , Abdullah Al (2015) Increase thermal comfort by integrating ELT at building foundation: an alternative recycling way in Malaysia. Civil and Environmental Research, 7 (1). pp. 33-37. ISSN 2224-5790 (P) 2225-0514 (O)

Eusuf, Muhammad Abu and Hasan , Abdullah Al (2013) Study the thermal impact of massive waste material to building construction. Applied Mechanics and Materials, 268-70. pp. 945-951. ISSN 1660-9336

Eusuf, Muhammad Abu and Ibrahim, Mansor and Islam, Rafikul (2012) The construction and demolition wastes in Klang Valley, Malaysia. PLANNING MALAYSIA - Journal of the Malaysian Institute of Planners, X . 99 -124. ISSN 1675-6215

Eusuf, Muhammad Abu and Mohit, Mohammad Abdul and Sami Eusuf, Muhammad Mehbub R. and Ibrahim, Mansor (2018) Impact of outdoor environments on the quality of life. Asian Journal of Environment-Behaviour Studies, 3 (10). pp. 36-46. E-ISSN 2514-751X

Eusuf, Muhammad Abu and R. Sabeek Eusuf, Muhammad Saadmann and Rahman Sami Eusuf, Muhammad Mehbub and Ibrahim, Mansor (2018) A review of the parametric characteristics of urban environment and it's influence to the urban quality of life. Environment- Behaviour Proceeding Journal, 3 (7). pp. 341-349. E-ISSN 2398-4287

Eusuf, Muhammad Abu and Salleh, Wira Md. Noor and Mamun, Abdullah Al and M., Adnan and Sabeek Eusuf, M.S.R. and Rahman, Mohammed Ataur and Ibrahim, Mansor (2018) A parametric approach for the study of heat flow between street canyon and the atmosphere. Planning Malaysia: Journal of the Malaysian Institute of Planners, 16 (2). pp. 50-61. ISSN 1675-6215 E-ISSN 0128-0945

Fellah, Maroua and Alam, Md. Zahangir and Mamun, Abdullah Al and Kabbashi, Nassereldeen Ahmed and Engliman, Nurul Sakinah (2023) Effect of the lignocellulolytic substrates and fermentation process parameters on myco-coagulant production for water treatment. IIUM Engineering Journal, 24 (1). pp. 13-26. ISSN 1511-788X E-ISSN 2289-7860

Gorashi, Faris and Abdullah, Alias (2009) An integrated approach for the prediction of water quality index based on land use attribute using data generation method and back propagation network algorith. Journal of the Malaysian Institute of Planners, 7. pp. 83-109. ISSN 1675-6215

Hassan, N. H. A and Nasir, N.S.M and Rahman, S. N. A. and Irfan, A. R. and Nordin, Norhuda Hidayah (2023) Development of high entropy alloy as catalyst for azo dye degradation in Fenton process. Archives of Metallurgy and Materials, 68 (1). pp. 209-213. ISSN 1733-3490 E-ISSN 2300-1909

Hong, Jer Lang and Ibrahim, Izihan and Jafri, Azmi and Shafie, Suzana and Naubi, Irena (2018) Temporal distribution of heavy rainfall for upper Klang catchment. Advanced science and technology letters, 151. pp. 25-30. E-ISSN 2287-1233

Hong, Jer Lang and Md Jafri, Azmi and Ibrahim, Izihan and Shafie, Suzana and Hong, Kee An and Naubi, Irena (2018) Design rainfall temporal patterns for upper Klang catchment. The Journal of the Institution of Engineers, Malaysia, 79 (1). pp. 21-30. ISSN 0126-513X

Hong, Kee An and Hong, Jer Lang and Ibrahim, Izihan and Hakim, Nur Wajihah (2020) Infilling streamflow data using HEC_HMS. The Journal of the Institution of Engineers, Malaysia, 81 (1). pp. 33-38. ISSN 0126-513X

Hosen, Md Sabuj and Mansor, Mariatul Fadzillah and Mohammad, Zahangir Alam (2019) Anaerobic co-digestion of sewage sludge and food waste as a promising alternative for waste management and energy production. Biological and Natural Resources Engineering Journal, 2 (1). pp. 26-46. E-ISSN 2637-0719

Idris, Azni and Wan Azmin, Wan Nor and Mohd Soom, Mohd Amin and Mamun, Abdullah Al (2005) The importance of sullage (grey-water) treatment for the restoration and conservation of urban streams. International Journal of River Basin Management, 3 (3). pp. 223-227. ISSN 1571-5124 E-ISSN 1814-2060

Idris, Zulkarnain Mohamed and Jamal, Parveen and Alam, Md Zahangir (2012) Evaluation of palm oil mill effluent treatment with concomitant phenolics production by aspergillus niger IBS-103ZA. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 55-61. ISSN 1991-8178

Jalal, K. C. A. and Alam, Md. Zahangir and Muyibi, Suleyman Aremu and Jamal, Parveen (2006) Isolation and purification of bacterial strains from treatment plants for effective and efficient bioconversion of domestic wastewater sludge. American Journal of Environmental Sciences, 2 (1). pp. 1-5. ISSN 1553-345X

Jamal, Parveen and Alam, Md. Zahangir and Mohd Salleh, Mohammad Ramlan and Nadzir, M. M. (2005) Screening of Aspergillus for citric acid production from Palm Oil Mill Effluent. Biotechnology, 4 (4). pp. 275-278. ISSN 1682-296X

Jamal, Parveen and Alam, Md. Zahangir and Ramlan, M. and Salleh, M. and M. Akib, Munirah (2005) Sewage treatment plant sludge: a source of potential microorganism for citric acid production. American Journal of Applied Sciences, 2 (8). pp. 1236-1239. ISSN 1546-9239

Jamal, Parveen and Alam, Md. Zahangir and Salleh, N. U. (2008) Media optimization for bioproteins production from cheaper carbon source. Journal of Engineering Science and Technology , 3 (2). pp. 124-130. ISSN 1823-4690

Jamal, Parveen and Alam, Md. Zahangir and Umi, Nurul (2007) Potential strain to produce bioprotein from cheaper carbon source: Hope for millions. American Journal of Biotechnology and Biochemistry, 3 (2). pp. 42-46. ISSN 1553-3468

Jamal, Parveen and Wan Nawawi, Wan Mohd Fazli and Alam, Md. Zahangir (2012) Optimum medium components for biosurfactant production by Klebsiella pneumoniae WMF02 utilizing sludge palm oil as a substrate. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 100-108. ISSN 1991-8178

Kabbashi, Nassereldeen Ahmed (2011) Sewage sludge Composting Simulation as carbon / nitrogen concentration change. Journal of Environmental Sciences, 23 (11). 1925-1928 . ISSN 1001-0742 (In Press)

Kabbashi, Nassereldeen Ahmed and Daoud, Jamal Ibrahim and Mirghani, Mohamed Elwathig Saeed and Rosli, Nurhasni Falina (2011) Statistical analaysis for removal of Cadmium from aqueous solution at High pH. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 440-446. ISSN 1991-8178

Kabbashi, Nassereldeen Ahmed and Jami, Mohammed Saedi and Abdurahman, Nour Hamid and Mohamad Puad, Noor Illi (2020) Rainwater harvesting quality assessment and evaluation: IIUM case study. IIUM Engineering Journal, 21 (1). pp. 12-22. ISSN 1511-788X E-ISSN 2289-7860

Kadar Hamsa, Abdul Azeez and Miura, Masao and Sakurai, Osamu and Seki, Sohei (2009) Analysis of streetlight illuminance in residential areas in Kuala Lumpur. Journal of Asian Architecture and Building Engineering, 8 (2). pp. 547-554. ISSN 1346-7581 (P), 1347-2852 (O)

Kasim, Norhidayu (2021) Waspada risiko bencana aliran puing, elak nyawa jadi taruhan. Berita Harian, 24 September 2021.

Khan, Nadeem Ullah and Irfan, Naeem and Soomro, Ali Raza (2000) The use of arch as a key component of architecture. Quid-E-Awam University Research Journal of Engineering Science & Technology, 1 (2). pp. 39-44.

Kharboot, Layla Haythoor and Hui, Xin Lim and Abu Bakar, Tuty Asma and Mohd Najib, Abdillah Sani and Mohd Nor, Nur Safwati and Nordin, Norhuda Hidayah and Fadil, Nor Akmal (2023) Synthesis and characterization of nickel boride nanoparticles for energy conversion catalyst materials – the effect of annealing temperature. Materials Today: Proceedings. (In Press)

Leman, Zulkiflle and Sapuan, Salit Mohd and Azwan, M. and Ahmad, Megat Mohamad Hamdan Megat and Maleque, Md. Abdul (2008) The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polymer - Plastics Technology and Engineering, 47 (6). pp. 606-612. ISSN 0360-2559

Liu, Yanbiao and Liu, Xiang and Yang, Shengnan and Li, Fang and Shen, Chensi and Huang, Manhong and Li, Junjing and Nasaruddin, Ricca Rahman and Xie, Jianping (2018) Rational design of high-performance continuous-flow microreactors based on gold nanoclusters and graphene for catalysis. ACS Sustainable Chemistry & Engineering, 6 (11). pp. 15425-15433. ISSN 2168-0485

Liu, Yanbiao and Zheng, Yuying and Du, Bowen and Nasaruddin, Ricca Rahman and Chen, Tiankai and Xie, Jianping (2017) Golden carbon nanotube membrane for continuous flow catalysis. Industrial & Engineering Chemistry Research, 56 (11). pp. 2999-3007. ISSN 0888-5885

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2021) Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering, 46. pp. 6557-6566. ISSN 2193-567X E-ISSN 2191-4281

Maleque, Md. Abdul and Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and D., Ramasamy (2021) An overview on synthesis, stability, opportunities and challenges of nanofluids. Materials Today: Proceedings, 41. pp. 30-37. E-ISSN 2214-7853

Mamat, Ahmad Fadhli and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Rabe, Noor Suzilawati and Muda, Rahsidi Sabri and Md Amin, Mohamad Faiq (2020) Utilization of unmanned aerial vehicle (UAV) in dam disaster management: evacuation planning. International Journal of Technology Management and Information System, 2 (4). pp. 51-62. E-ISSN 2710-6268

Mamun, Abdullah Al and AlSaadi, Mohammed AbdulHakim and Muyibi, Suleyman Aremu and Alam, Md Zahangir and Iis, Sopyan (2014) Kinetics of cadmium adsorption by CNTs grown on PACs. International Journal of Nanoelectronics and Materials, 7 (1). pp. 25-33. ISSN 2232-1535

Mamun, Abdullah Al and Amid, Azura and Abd. Karim, Imtinan and Alam, Md Zahangir and Sayem, S.M. (2015) Phytoremediation and mathematical model for domestic wastewater by Chlorella vulgaris. Advances in Environmental Biology, 9 (14). pp. 139-144. ISSN 1995-0756 E-ISSN 1998-1066

Mamun, Abdullah Al and Idris, A. (2008) Treatment of POME by pilot plant anaerobic fluidised bed reactor. IIUM Engineering Journal, 9 (1). pp. 9-17. ISSN 1511-788X E-ISSN 2289-7860

Mansor, Mariatul Fadzillah and Jamaludin, Nurul Syazwana and Tajuddin, Husna Ahmad (2021) Optimization of food waste to sewage sludge ratio for anaerobic co-digestion process using Artificial Neural Network (ANN) and Genetic Algorithm (GA). Biological And Natural Resources Engineering Journal, 5 (2). pp. 62-72. E-ISSN 2637-0719

Masjuki, H.H. and Maleque, Md. Abdul (1996) The effect of palm oil diesel fuel contaminated lubricant on sliding wear of cast irons against mild steel. Wear, 198 (1-2). pp. 293-299. ISSN 0043-1648

Mat Nawi, Mohd Nazir and Alzaghir, Abdullah Faisal and Husin, Hafiz and Gebremariam, M. A. and Azhari, Azmir (2023) Effect of waterjet cleaning parameters during paint removal operation on automotive steel components. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 31-38. E-ISSN 2636-9575

Mat Shukor, Sabril Haziq and Syamsul Bahrin, Abdul Hamid and Kasim, Norhidayu and Ab. Moin, Zuraidah (2020) Slope inspection system: using image processed by machine learning algorithm to determine risk of slope failure. International Journal of Engineering Technology and Sciences, 7 (2). pp. 106-118. ISSN 2289-679X E-ISSN 2462-1269

Mat Zin, Mizan Izzati and Suratem, Muhammad Azammuddin and Wan Nawawi, Wan Mohd Fazli (2021) Influence of the pre-treatment of nanofibers obtained from mushrooms on the mechanical properties of the paper. Polimery, 66 (9). pp. 1-6. ISSN 0032-2725

Mohamed Noor, Noraini and Chan Abdullah, Ezzat (2018) Self-purging pyrolysis of sugarcane bagasse biomass to Disor-Deredmicroporous Biochar production. International Journal of Engineering & Technology, 7 (4.38). pp. 1680-1682. ISSN 2227-524X

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2014) Carbon dioxide capture at various temperatures using Ca(OH)2 sorbent fabricated by sol-gel route in ethanol media. Advanced Materials Research, 1024. pp. 35-38. ISSN 1662-8985

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2014) Development of Ca(OH)2nanosorbent for intermediate-high temperature CO2 capture via wet chemical route in N,N-Dimethylformamide solvent. Advanced Materials Research , 911. pp. 410-414. ISSN 1662-8985

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2013) Fabrication of Ca(OH)2 nanostructures by facile solution – based synthesis at various reaction temperatures as CO2 adsorbent. Materials Science Forum, 756. pp. 175-181. ISSN 1662-9752

Mohd Daud, Farah Diana and Vignesh, Kumaravel and Sreekantan, Srimala and Mohamed, Abd. Rahman (2015) Improved CO2 adsorption capacity and cyclic stability of CaO sorbents incorporated with MgO. New Journal of Chemistry, 40 (1). pp. 231-237. ISSN 1144-0546 E-ISSN 1369-9261

Mohd Sopery, Luqman Hakim and Ayob, Mohd Fairullazi (2023) An investigation on sustainable refurbishment practice of building works in Malaysia. Journal of Architecture, Planning and Construction Management, 13 (1). pp. 29-39. ISSN 2231-9514 E-ISSN 2462-2222

Mohd. Din, Shamzani Affendy and Aminuddin, N M (2014) The exposure assessment of airborne particulates matter (PM10 & PM2.5) towards building occupants: a case study at KL Sentral, Kuala Lumpur, Malaysia. IOP Conference Series: Earth and Environmental Science, 18 (2014). pp. 1-6. ISSN 1755-1315

Mohd. Din, Shamzani Affendy and Othman, Rashidi and Nik Yahya, Nik Nurul Hidayah and Hanapi, Norsyamimi (2015) Inhalable and respirable dust from coal-fired power plant. Jurnal Teknologi, 77 (30). pp. 1-6. ISSN 0127–9696 E-ISSN 2180–3722

Mohd. Hussain, Mohd. Ramzi (2022) Infrastruktur 'biru, hijau' tingkatkan daya tahan bandar. Berita Harian, 18 Januari 2022.

Mohd. Hussain, Mohd. Ramzi (2022) Pelan induk tindakan mitigasi panduan penting urus bencana. Berita Harian, 04 January 2022.

Mohd. Hussain, Mohd. Ramzi (2022) Projek tebatan banjir perlu dirancang secara teliti, sistematik. Berita Harian, 27 August 2022. p. 12.

Mohd. Hussain, Mohd. Ramzi (2022) Syor wujudkan PPS khas simpan harta, kenderaan mangsa banjir. Berita Harian Malaysia, 20 October 2022.

Muda, Rahsidi Sabri and Md Amin, Mohamad Faiq and Mohd Khidzir, Ainul Bahiah and Tukiman, Izawati and Mohd. Hussain, Mohd. Ramzi (2021) Knowledge Transfer in People-Centered Dam-Related Disaster Program in Cameron Highlands. Journal of Advanced Research in Applied Sciences and Engineering Technology, 24 (1). pp. 37-46. ISSN 2462-1943

Muda, Rahsidi Sabri and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Abdullah, Fatin Shahira (2021) Community preparedness towards dam disaster: Disaster Risk Reduction (DRR) program in Cameron Highlands. International Journal of Environmental Science and Development, 12 (9). pp. 267-273. ISSN 267-273 E-ISSN 2010-0264

Mukhtaruddin, Muna Tasnim and Alam, Md Zahangir and Mohd. Salleh, Hamzah (2012) Characterization of purified cellulase from fermentation of sewage sludge. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 74-78. ISSN 1991-8178

Muyibi, Suleyman Aremu and Jamal, Parveen and Mohd. Salleh, Hamzah (2005) Islamic perspectives on environmental and waste management issues. Journal of Islamic Law Review, 1. pp. 31-56. ISSN 0973-2918

Ng, Jeffery Nazrien and Mohd Taib, Aizat and Abd. Rahman, Norinah and Abang Hasbollah, Dayang Zulaika and Ramli, Ahmad Bukhari and Taib, Mariati and Mazlan, Muhammad Hafizuddin (2021) Influence of El-Nino adapted rainfall event on partially saturated slope behavior. Journal of Mines, Metals and Fuels, 69 (8). pp. 151-158. ISSN 0022-2755

Nor Azlan Shah, Nurul Fatihah and Abd Hakim, Nur Wajihah and Salleh, Md Noor and Ali, Maisarah and Ayob, Mohd Fairullazi and Sekaran, Thayalam and Ismail, Mohd Azmi and Mat Amin, Mohd Zaki (2022) Flood analysis and non-structural approach for flood protection in Sg. Kelantan. IOP Conference Series: Earth and Environmental Science, 1022 (012070). ISSN 1755-1307

Nuruzzaman, Md. and Mamun, Abdullah Al and Salleh, Md Noor (2017) Challenges in the rehabilitation of the Pusu River. International Journal of Conservation Science, 8 (1). pp. 121-130. ISSN 2067-533X E-ISSN 2067-8223

Nuruzzaman, Md. and Mamun, Abdullah Al and Salleh, Md. Noor (2016) Impediments to river rehabilitation. Environmental Quality Management, 26 (2). pp. 5-21. ISSN 1088-1913 E-ISSN 1520-6483

Onundi, Yusuf Bamidele and Al-Mamun, Abdullah and Al-Khatib, Ma An Fahmi Rashid and Al-Saadi, M. A. and Muyibi, Suleyman Aremu (2011) Heavy metals removal from synthetic wastewater by a novel nano-size composite adsorbent. International Journal of Environmental Science and Technology , 8 (4). pp. 799-806. ISSN 1735-1472 (P), 1735-2630 (O)

Othman, Maizatulnisa and Bukhari, Mohamad and Halim, Zahurin and Mohamad, Souad A. and Khalid, Khalisanni (2015) Sandwich structure composites:effect of kenaf on mechanical properties. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 189-192.

Razali, Farah Asyiqin and Ayob, Mohd Fairullazi (2022) An appraisal of cost-effective approaches for the Pusu River rehabilitation. Journal of Architecture, Planning and Construction Management (JAPCM), 12 (2). pp. 40-57. ISSN 2231-9514 E-ISSN 2462-2222

Rosli, Ruhan Asyrani and Shamsul Harumain, Zakuan Azizi and Zulkalam, Mohd Faizuddin and Abdul Hamid, Azzmer Azzar and Sharif, Mohd. Faez and Mohamad, Mohd Azrul Naim and Noh, Abdul Latif and Shahari, Rozilawati (2021) Phytoremediation of Arsenic in Mine Wastes by Acacia mangium. Remediation, 2021. pp. 1-11. ISSN 1520-6831

Sabri Muda, Rahsidi and Abdullah, Fatin Shahira and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Ab Sani, Jasasikin (2021) Flood mapping for dam break assessment in Cameron Highlands. International Journal of Engineering Advanced Research(IJEAR), 3 (1). pp. 46-63. E-ISSN 2710-7167

Samat, Noorasikin and Shafiee, Muhd Izzudin and Syed Bakar, Sharifah Shahnaz (2023) Mechanical and morphological properties of cellulose-reinforced thermoplastic composites: effect of recycling. Journal of Engineering Science and Technology, 18 (1). pp. 70-82. ISSN 1823-4690

Samsudin, Amirah and Abdul Halim, Amanatuzzakiah and Azmi, Azlin Suhaida and Mohd Nawi, Nazri Mohd (2022) Study on the effect of microalgae – bacteria growth conditions in synthetic wastewater treatment. Biological And Natural Resources Engineering Journal, 6 (1). pp. 36-46. E-ISSN 2637-0719

Sanusi, Aliyah Nur Zafirah and Shao, Li (2014) Seeking underground for potential heat sink in Malaysia for earth air heat exchanger (EAHE) application. Australian Journal of Basic and Applied Sciences, 8 (8). pp. 54-57. ISSN 1991-8178

Saparudin, Nurain Asrin and Kasim, Norhidayu and Abu Taib, Kamarudin and Wan Azahar, Wan Nur Aifa and Kasim, Nur Aisyah and Ali, Maisarah (2022) Improvement of problematic soil using crumb rubber tyre. IIUM Engineering Journal, 23 (2). pp. 72-84. ISSN 1511-788X E-ISSN 2289-7860

Sarat, Adebayo-Aminu and Eusuf, Muhammad Abu (2012) Effects of pavement surface temperature on the modification of urban thermal environment. DIMENSI: Journal of Architecture and Built Environment, 39 (1). pp. 1-4. ISSN ISSN 0126-219X

Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2014) Incorporation of kenaf core fibers into low density polyethylene/thermoplastic sago starch blends exposed to natural weathering. Molecular Crystals and Liquid Crystals, 603 (1). pp. 180-193. ISSN 1542-1406 E-ISSN 1563-5287

Septiyana, Diah and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) Enhancing water sustainability index assessment through risk management, IoT, and artificial intelligence in water operation: a review. Water Conservation & Management, 7 (2). pp. 97-106. ISSN 2523-5664 E-ISSN 2523-5672

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Topa, Ameen and Ismail, Ahmad Faris (2022) Numerical modelling of bird strike on a rotating engine blades based on variations of porosity density. IIUM Engineering Journal, 23 (1). pp. 412-423. ISSN 1511-788X E-ISSN 2289-7860

Shams, Shahriar and Amimul, Ahsan and Mamun, Abdullah Al and Arunkumar, Thirugnanasambantham (2016) Physical risk assessment for urban water supply in a developing country: A case of Mega City Dhaka. Engineering Journal, 20 (3). pp. 23-32. ISSN 0125-8281

Shazalee, Nur Faradilla Roza and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Mohamad Nadzri, Amira Arisya (2023) Role of landscape vegetation in treating slope failure. International Journal of Latest Research in Humanities and Social Science (IJLRHSS), 6 (7). pp. 23-30. ISSN 2456-0766

Sie Chun, Ting and Ismail , Amelia Ritahani and A. Malek, Marlinda (2013) Development of effluent removal prediction model efficiency in septic sludge treatment plant through clonal selection algorithm. Journal of Environmental Management, 129. pp. 260-265. ISSN 0301-4797

Sofian, Anis Sofia and Samat, Noorasikin and Meor Sulaiman, Meor Yusoff and Paulus, Wilfred (2019) Alumina recovery from industrial waste: study on the thermal, tensile and wear properties of polypropylene/alumina nanocomposites. International Journal of Precision Engineering and Manufacturing-Green Technology, 7 (1). pp. 163-172. ISSN 2288-6206 E-ISSN 2198-0810

Syed Abdullah, Syed Idrus Bin and Iannucci, Lorenzo and Greenhalgh, Emily S and Abdullah, Nur Azam (2022) The delamination behaviour of Vectran/Epoxy composites having a novel non-crimp fabric architecture. Composites Part B: Engineering, 228 (109413). pp. 1-12. ISSN 1359-8368 E-ISSN 1879-1069

Ting, Sie Chun and Abdul Malik, Marlinda and Ismail, Amelia Ritahani (2017) A review of wastewater treatment plant modelling: Revolution on modelling technology. American Journal of Environmental and Resource Economics, 2 (1). pp. 22-26.

Wan Nik, W.B. and Maleque, Md. Abdul and Ani, F. N. and Masjuki, H.H. (2007) Experimental investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology, 59 (5). pp. 200-208. ISSN 0036-8792

Zainudin, Zaki (2010) Benchmarking river water quality in Malaysia. Jurutera. pp. 12-15. ISSN 0126-9909

Zainudin, Zaki (2011) The state of our rivers: back to basics. Berita Ensearch, 1 (1). pp. 3-5.

Zainudin, Zaki and Mohamed, Maketab and Ramli, Mohd. Rosslim (2010) Effects of induced salinity on BOD reaction kinetics of river water samples (Kesan peningkatan kemasinan terhadap kinetik tindak balas keperluan oksigen biokimia 5 hari menggunakan sampel air sungai). The Malaysian Journal of Analytical Sciences, 14 (1). pp. 24-31. ISSN 1394-2506

Zakaria, Mohd Nazarudin and Raja Yahya, Mohd Fakharulzaman and Abd Rahman, Sukirah and Kamaruddin, Nooramirah and Othman, Maizatulnisa and Bahari, Shahril Anuar (2015) Comparative study of celluloses from biofilm-forming bacteria for development of cellulose-reinforced Product. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 5 (4). pp. 20-22. ISSN 2278-3075

Zhang, Haiying and Khan Chowdhury, Ahmed Jalal (2019) Research on integrated technology of desulphurization, denitration and waste heat recovery of coke oven flue gas. Nature Environment and Pollution Technology, 18 (5 (Special Issue)). pp. 1621-1625. ISSN 0972-6268 E-ISSN 2395-3454

Book

Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Sarifuddin, Norshahida and Syed Shaharuddin, Sharifah Imihezri and Mohd Ali, Afifah and Abdul Halim, Nor Farah Huda, eds. (2023) Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Lecture Notes in Mechanical Engineering . Springer Nature, Singapore. ISBN 978-981-19-9508-8

Mohd. Hussain, Mohd. Ramzi and Rabe, Noor Suzilawati and Tukiman, Izawati and Muda, Rahsidi Sabri (2019) Study on respondents' awareness and preparedness when disaster strikes: case study of local community in Cameron Highland, Pahang. e-IPH Ltd., UK, Sheffield, United Kingdom, pp. 25-26.

Onundi, Yusuf Bamidele and Al-Mamun, Abdullah and Al-Khatib, Ma An Fahmi Rashid (2012) Comparing metals adsorption by carbon adsorbents: evaluating absorption properties of different carbon adsorbents. LAP Lambert Academic Publishing, Kuala Lumpur. ISBN 9783848414956

Syed Abdul Bahari, Syed Najib and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Quality improvement of Three-way Catalytic Converter (TWC) system: application of failure modes and effects analysis (FMEA) methodology. LAP Lambert Academic Publishing, Germany. ISBN 9783845443287

Zainudin, Zaki and Mohamed, Maketab and Tengku Yahya, Tengku Fazli (2011) A practical approach to river water quality modeling. KVC Book . IIUM Press, Malaysia. ISBN 9789674180256

Book Chapter

Abu Bakar, Aniza and Abdul Malek, Nurhayati (2015) Outdoor thermal performance investigations: towards a sustainable tropical environment. In: energy and sustainability V. energy and sustainability, V (V). WIT Press, Southampton, pp. 23-41. ISBN 978-1-78466-095-6

Amimul , Ahsan and Alam, Md. Zahangir and Monzur , A. Imteaz and Hossain, A.B.M. Sharif and Abdul Halim , Ghazali (2011) Evaporation phenomenon inside a solar still: from water surface to humid air. In: Evaporation, condensation and heat transfer. InTech, Croatia, pp. 3-22. ISBN 9789533075839

Denan, Zuraini (2015) Research Methods for Visual Comfort Study. In: Methodologies in Architectural Research. First Edition . IIUM Press, IIUM, Kuala Lumpur, Malaysia, pp. 87-106. ISBN 978-967-418-331-8

Haji Hassan, Masjuki and M., Gulzar and M. A., Kalam and N. W. M., Zulkifli and Maleque, Md. Abdul and M. S. S., Malik and A., Arslan (2023) Engine tribology: enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings: Technologies and Applications. CRC Press, Boca Raton, pp. 221-254.

Jasni, Ainil Hawa and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi and Ali, Fathilah and Ahmad Nor, Yusilawati (2023) Naturally derived biomaterials: advances and opportunities. In: Engineered Biomaterials: Synthesis and Applications. Engineering Materials . Springer, Singapore, pp. 3-41. ISBN 978-981-99-6697-4

Kabbashi, Nassereldeen and Muyibi, Suleyman Aremu (2009) An Integrated Water Management Plan (IWRMP) for Oman using an Expert System Technique. In: Technologies and Management for Sustainable Biosystems. Biotechnology in Agriculture, Industry and Medicine . Nova Science Publishers , USA, pp. 95-104. ISBN 978-1-60876-104-3

Karim, A.N. Mustafizul and Nordin, Anis Nurashikin and Begum, Shahida (2014) Technical and economic feasibility of sensor technology for health/environmental condition monitoring. In: Comprehensive Materials Processing. Elsevier, Amsterdam, pp. 499-514. ISBN 9780080965321

Rosman, Putri Shazlia and Abu Samah, Mohd Armi and Yunus, Kamaruzzaman and Mohd. Hussain, Mohd. Ramzi (2023) Pengurusan penghasilan zarah terampai di kawasan tapak pembinaan. In: DINAMIKA ALAM SEKITAR. PENERBIT UKM, Bangi, pp. 81-93. ISBN 978-629-7547-58-9

Sabri Muda, Rahsidi and Tukiman, Izawati and Mohd. Hussain, Mohd. Ramzi and Rabe, Noor Suzilawati (2020) Building capacity through school based engagement on dam safety program in Cameron Highlands. In: Water resources development and management. Springer, Singapore, pp. 51-63. ISBN 1614810X

Zainudin, Zaki and Abdul Rahman, Norazah and Abdullah, Norizan (2011) Speciation of fast and slow biochemical oxygen demand. In: Recent advances in bioenvironmental engineering. IIUM Press, Kuala Lumpur, pp. 154-173. ISBN 9789670225852

Proceeding Paper

Abd Hakim, Nur Wajihah and Salleh, Md. Noor and Al-Mamun, Abdullah and Ali, Maisarah and Ayob, Mohd Fairullazi and Sekaran, Thayalam and Ismail, Mohd Azmi and Mat Amin, Mohd Zaki (2023) Assessment of hydrological response of Pahang River Basin. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, Bandar Seri Begawan, Brunei Darussalam.

Abdul, Aslina and Mohamad Nasir, Nur Ikma and Abu Bakar, Aniza and Abdul Malek, Nurhayati and Othman, Rosniza and Sanusi, Aliyah Nur Zafirah (2014) The impact of the outdoor design and architectural dimension of Masjid Shas towards microclimate. In: UMRAN 2014 , 29th April 2014, Kulliyyah of Architecture and Environmental Design, IIUM.

Abdullah, Norizan and Abdul Rahman, Norazah and Zainudin, Zaki (2010) Fast and slow carbonaceous BOD speciation of sewage effluent. In: 12th Annual IEM Water Resources Colloquium, 22 May 2010, Petaling Jaya, Selangor.

Abu Bakar, Aniza and Abdul Malek, Nurhayati (2014) Outdoor thermal performance investigations towards sustainable tropical environment. In: 5th International Conference on Energy and Sustainability2014, 16-18 December 2014, Putrajaya. (In Press)

Abu Bakar, Aniza and Gadi, Mohamed (2016) Urban outdoor thermal comfort of the hot-humid region. In: 4th International Building Control Conference, 7-8 March 2016, Kuala Lumpur, Malaysia.

Abu Bakar, Ayu Haslija and Yin, Shin Koay and Chuah Abdullah, Luqman and Choong, Thomas S Y and Alkhatib, Ma'an Fahmi Rashid and Mobarekeh, Mohsen Nourouzi and Mohd Zahri, Nur Amirah and Yern, Chee Chin (2018) Fluoride removal by Palm Kernel Shell Activated Carbon (PKSAC): batch and isotherms approach. In: The 4th International Conference on Chemical Engineering and Industrial Biotechnology 2018 (ICCEIB 2018), 1st-2nd August 2018, Kuala Lumpur. (Unpublished)

Adebayo, Opatokun and Kabbashi, Nassereldeen and Alam, Md. Zahangir and Salihu, Aliyu and Abass O., Alade and Tijani, I. R. D (2011) Composting of food and yard wastes by locally isolated fungal strains. In: The Second International Conference on Biotechnology Engineering ICBIOE'11.

Adnan, Nur Adani and Ibrahim, Izihan and Ibrahim, Saerahany Legori (2021) Flow-3D CFD model of bifurcated open channel flow: setup and validation. In: 9th International Symposium on Environmental Hydraulics, 19th-22 July 2021, Seoul, Korea. (Unpublished)

Ahmad, Zuraida and Purwanto, Hadi and Sarifuddin, Norshahida and R. F. , Faezah and Y. , Farrah (2011) Acoustical and thermal properties of lightweight coir fiber reinforced cements composites. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

Al-Khatib, Ma An Fahmi Rashid and Mirghani, Mohamed Elwathig Saeed and Kudssiah, Esssam Yassin and Husain, Iman A. F. (2009) Immobilization of chitosan onto carbon nanotubes for lead removal from water. In: 3rd International Conference on Chemical & Bioprocess Engineering (ICCBPE-2009), 12–14th August 2009, Novotel Hotel, Borneo, Kota Kinabalu, Sabah. .

Al-Khatib, Ma An Fahmi Rashid and Muyibi, Suleyman Aremu and Omotayo, Amode Jeminat (2010) Production of activated carbon from (EFB) for removal of cadmium. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Al-Mamun, Abdullah and Al-Saadi, Mohammed A. and Muyibi, Suleyman Aremu and Alam, Md. Zahangir (2010) Modification of CDV reactor for carbon nanomaterialns production. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Al-Mamun, Abdullah and Al-Saadi, Mohammed A. and Muyibi, Suleyman Aremu and Alam, Md. Zahangir and Sopyan, Iis (2012) Kinetics of cadmium adsorption by CNTs grown on PACs. In: International Conference on Nanotechnology, ICONT 2012, 29 May – 01 June 2012, Pahang.

Al-Mamun, Abdullah and Amid , Azura and Karim , Imtinan A. and Samiur Rashid, Md. Shah (2012) Phytoremediation of partially treated wastewater by chlorella vulgaris. In: International Conference on Chemical Processes and Environmental Issues, ICCPEI 2012, 15 - 16 July 2012, Singapore.

Al-Mamun, Abdullah and Jamal, Parveen and Ghazali, Siti Salmi (2007) Optimization of process parameters to maximize the extraction of disinfectant from betel leaf. In: Kulliyyah of Engineering Research and Innovation Exhibition (KERIE 2007), 12th - 13th December 2007, Cultural Activity Centre (CAC), IIUM. (Unpublished)

Al-Mamun, Abdullah and Salleh, Md Noor and Muyibi, Suleyman Aremu and Zainudin, Zaki and Idris, Azni and Abdul Latiff , Nurzuliana and Suhaimi, Ahmad Safiuddin (2013) Heavy metal contents in highway runoff in Malaysia. In: 4th Global Engineering, Science and Technology Conference 2013, 27th-28th Dec. 2013, BIAM Foundation, 63 New Eskaton, Dhaka, Bangladesh.

Al-Mamun, Abdullah and Salleh, Md. Noor and Al-Edresi, Esam Abdo Ali (2014) Adsorption of chlorine from drinking water by granular activated carbon. In: 5th International Chemistry Conference, 26-29 April 2014, Abha Palace Hotel, Saudi Arabia. (Unpublished)

Alam, Md. Zahangir and Abdul Karim, Mohamed Ismail and Hamisan, Ahmad Fadhlan and Jamal, Parveen and Chowdhury, Ahmed Jalal Khan (2006) Liquid State Bioconversion of Palm Oil Mill Effluent for Cellulase Production: Statistical Optimization of Process Conditions. In: 1st International Conference on Natural Resources Engineering & Technology, 24-25 July 2006, PutraJaya.

Alam, Md. Zahangir and Abdul Karim, Mohamed Ismail and Jamal, Parveen and Al-Mamun, Abdullah and Bari, Md. Niamul (2010) Production of Citric Acid from Oil Palm Empty Fruit Bunches by Solid State Bioconversion using Local Aspergillus niger. In: National Biotechnology Seminar 2010, 24 - 26 May 2010, PWTC, Kuala Lumpur.

Alam, Md. Zahangir and Bari, Md. Niamul and Muyibi, Suleyman Aremu and Jamal, Parveen and Al-Mamun, Abdullah (2010) High yield Cellulosic Citric Acid. In: IIUM Research, Innovation and Invention Exhibition 2010 (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Alam, Md. Zahangir and Jamal, Parveen and Basri, MS. S. Maryam (2007) Solid state bioconversion of oil palm empty fruit bunches for citric acid production. In: International Exposition of Research and Inventions of Institutions of Higher Learning 2007 (PECIPTA'07), 10th - 12th August 2007, Kuala Lumpur Convention Centre, Malaysia. (Unpublished)

Alam, Md. Zahangir and M. Hanapi, Nur Hanis and Jamal, Parveen (2010) Novel raw material for Citric Acid production. In: IIUM Research, Innovation and Invention Exhibition 2010 (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Alam, Md. Zahangir and Muyibi, Suleyman Aremu and Jamal, Parveen and Al-Mamun, Abdullah and Bari, Md. Niamul and Basri, S Maryam H (2007) Citric acid from renewable raw material oil palm biomass. In: Kulliyyah of Engineering Research and Innovation Exhibition (KERIE 2007), 12th - 13th December 2007, Cultural Activity Centre (CAC), IIUM. (Unpublished)

Ali , Eman N and Muyibi, Suleyman Aremu and Salleh, Hamzah Mohd. and Salleh, Mohd Ramlan M. and Alam, Md. Zahangir (2009) Moringa oleifera seeds as natural coagulant for water treatment. In: Thirteenth International Egyptian Water Technology Conference 2009, March 12-15, 2009, Hurghudah, Egypt. (Unpublished)

Alzaghir, Abdullah Faisal and Mat Nawi, Mohd Nazir and Gebremariam, M. A. and Azhari, Azmir (2022) Optimization of waterjet paint removal operation using artificial neural network. In: iM3F2021: Innovative Manufacturing, Mechatronics & Materials Forum 2021, 20th September 2021, Universiti Malaysia Pahang, Pekan (Virtual).

Amosa, Mutiu Kolade and Jami, Mohammed Saedi and Alkhatib, Ma'an Fahmi Rashid (2016) Cross-flow microfiltration of a high strength industrial wastewater: Modelling of membrane fouling mechanisms. In: Qatar Foundation Annual Research conference, 22-23 March 2016, Doha. (Unpublished)

Ariff, Tasnim Firdaus and Zakaria, Azriena Nathasa (2023) Mechanical and structural properties of epoxy bio-composite using fish bones as bio-filler. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, KualaLumpur.

Athoillah, Ahdyat Zain and Ahmad, Farah (2018) Lipid production from bioremediation of palm oil mill effluent. In: 5th International Conference Biotechnology Engineering (ICBioE ‘18), 19th-20th September 2018, Kuala Lumpur.

Ayob, Mohd Fairullazi (2022) Life Cycle Cost analysis for asset and facilities – optimizing investment on asset life cycle through crises. In: Webinar Half Day Seminar on Life Cycle Cost (LCC) for Asset and Facilities, 25th November 2022, Virtual Seminar via “GotoWebinar”. (Unpublished)

Ayob, Mohd Fairullazi (2023) Overview of life cycle cost formulas and calculation. In: Webinar Half Day Seminar on “Life Cycle Cost Analysis (LCCA) for Asset Management”, 5th December 2023, Virtual Seminar. (Unpublished)

Bellow, Ibrahim Adebayo and Kabbashi, Nassereldeen Ahmed and Alam, Md Zahangir and Alkhatib, Ma'an Fahmi Rashid (2016) Textile wastewater challenges and current mitigation methods: an overview. In: "4th International Conference on Biotechnology Engineering (ICBioE'16): Harnessing Biotechnology For Sustainable And Green Future", 25-27 July 2016, Kuala Lumpur, Malaysia.

Dzulkafli, Noor Fazreen and Noor Azmi, Azran Azhim and Musa, Md Noor (2014) Behaviour and fate of trace metal element in seawater: an overview. In: Regional Conference On Science, Technology & Social Sciences (RCTSS 2014), 23rd-25th November 2014, Cameron Highlands, Pahang.

Eusuf, Muhammad Abu and Mohit, Mohammad Abdul and Sami Eusuf, MMR and Ibrahim, Mansor (2014) Review the impact of outdoor environment and the quality of life. In: AMER International Conference on Quality of Life (AicQoL 2014), 4th-5th Jan. 2014, The Pacific Sutera Hotel, Sutera Harbour, Kota Kinabau, Sabah.

Hakim, Nur Wajihah and Salleh, Md Noor and Al Mamun, Abdullah and Ali, Maisarah and Ayob, Mohd Fairullazi and Sekaran, Thayalam and Ismail, Mohd Azmi and Mat Amin, Mohd Zaki (2021) Assessment of hydrological response of Pahang river basin. In: 8 th Brunei International Conference on Engineering and Technology 2021 (BICET 2021), 8-10 November 2021, Brunei. (Unpublished)

Ibrahim, Aishatus Solihah and Mohamed Shuhaimy, Nuranis Fadhilah and Abu Bakar, Aniza and Hj Mohd Ariffin, Noor Aziah and Mohd. Din, Shamzani Affendy (2012) The effect of landscape design elements and mosque design on the thermal environment of main prayer hall: a case study of Tuanku Mizan Zainal Abidin Mosque, Putrajaya. In: UMRAN 2012, 3 May 2012, Gombak, Kuala Lumpur. (Unpublished)

Ibrahim, Izihan and Mustafa, Maizatun and Abd Ghani, Hj. Mansor and Kailasam, Kalithasan and Al Khatib, Ma'an Fahmi Rashid (2020) Post COVID-19 river quality: challenges ahead! In: IIUM River of Life Flagship Project, 7th May 2020, Online Webinar (Zoom). (Unpublished)

Ibrahim Exstara, Luqman Hakim and Ayob, Mohd Fairullazi (2023) Recycled bricks as an alternative construction materials in the Malaysian construction industry. In: INTERNATIONAL COMPETITION ON SUSTAINABLE EDUCATION 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Idris, Zulkarnain Mohamed and Jamal, Parveen and Alam, Md. Zahangir (2009) Effect of different media components and process conditions on the productivity of phenolic compounds from palm oil mill effluent by local isolated strain. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE 2009), 12-13 December 2009, PWTC, Kuala Lumpur.

Idris, Zulkarnain Mohamed and Jamal, Parveen and Alam, Md. Zahangir (2011) Evaluation of Palm Oil Mill Effluent Treatment Concomitant Phenolics Production by Aspergillus Niger IBS-103ZA. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Irwan, Dani and Basri, Noor Ezlin Ahmad and Watanabe, Kohei and Ahmed, Ali Najah (2022) Age and household solid waste arising in suburban Malaysia: a statistical approach. In: Virtual Conference on Disaster Risk Reduction (VCDRR 2021), 26 October 2021, Virtual.

Ishola, Mohammed Nurudeen and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Mirghani, Mohamed Elwathig Saeed (2013) Approaches in the utilization of Jatropha Curcas L. as feedstock for biodiesel synthesis: A Review. In: International Conference on Biotechnology Engineering (ICBioE 2013), 2 – 4 Jul 2013, Kuala Lumpur, Malaysia.

Jamal, Parveen (2007) Animal feed with added bioprotein from agro industrial waste. In: International Trade Fair of Ideas, Inventions and New Products (IENA 2007), 1- 4 November 2007, Germany. (Unpublished)

Jamal, Parveen (2008) New potential carbon source for bioprotein production. In: 19th International Invention, Innovation and Technology Exhibition (ITEX'08), 9th - 11th May 2008, Kuala Lumpur Convention Centre, Malaysia. (Unpublished)

Jamal, Parveen (2007) Palm Industry Wastes: A Novel Source of Biophenols. In: International Trade Fair of Ideas, Inventions and New Products (IENA 2007), 1- 4 November 2007, Germany. (Unpublished)

Jamal, Parveen (2008) Palm oil mill effluent: a novel source of natural bioactive compounds having high activity compared to synthetic scavenger. In: 19th International Invention, Innovation and Technology Exhibition (ITEX'08), 9th - 11th May 2008, Kuala Lumpur Convention Centre, Malaysia.

Jamal, Parveen and Alam, Md. Zahangir and Alimin, Nur'ain (2007) Bioprotein: An Innovative and Alternative Protein Rich Food Source. In: 6th Malaysian Technology Expo (MTE 2007), 29th - 31st March 2007, PWTC, Kuala Lumpur. (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Idris, Zulkarnain Mohamed (2010) A novel process development for production of Phenolic Acids with high scavenging activity from palm oil mill effluent. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Mohamed Salleh, Mohamad Ramlan and M. Akib, Munirah (2005) Microbial treatment performance with developed bioconversion process for citric acid production from sewage treatment plant sludge. In: 2nd International Conference on Chemical and Bioprocess Engineering (ICCBpE-SOMChE 2005), 8-10 Dec 2005, Kota Kinabalu, Sabah.

Jamal, Parveen and Alam, Md. Zahangir and Mohd Salleh, Mohammad Ramlan and M. Akib, Munirah (2005) Isolation and screening of potential microorganisms for citric acid production from sewage treatment plant sludge. In: The 8th Applied Biology Symposium 2005, 22nd - 23rd June 2005, Marriot, Putrajaya.

Jamal, Parveen and Alam, Md. Zahangir and Mohd Salleh, Mohammad Ramlan and Nadzir, Masrina M. (2006) Bioconversion process for microbial treatment of palm oil mill effluent to produce citric acid. In: International Conference on Agricultural Wastes, 21-23 March, 2006, Putrajaya, Malaysia.

Jamal, Parveen and Alam, Md. Zahangir and Mohd Salleh, Mohammad Ramlan and Nadzir, Masrina M. and Akib, Munirah M. (2006) Liquid state bioconversion of organic residues for production of citric acid by Aspergillus niger. In: 17th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX'06), 19th - 21st May 2006, Kuala Lumpur Convention Centre, Malaysia. (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Mukhtaruddin, Muna Tasnim and Azlan, Noor Fazilah (2007) Process optimization in bioreactor for improving feed production from renewable biopolymers. In: Kulliyyah of Engineering Research and Innovation Exhibition (KERIE 2007), 12th - 13th December 2007, Cultural Activity Centre (CAC), IIUM. (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Mukhtaruddin, Muna Tasnim and Azlan, Noor Fazilah (2008) Process optimization in bioreactor for improving feed production from renewable biopolymers. In: Malaysian Technology Expo (MTE 2008), 21 - 23 February 2008, PWTC, Kuala Lumpur. (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Nagoor, Ahmad Anas and Yahaya, Shah Nizam (2007) Palm Industry Wastes: A Novel Source of Biophenols. In: International Exposition of Research and Inventions of Institutions of Higher Learning 2007 (PECIPTA'07), 10th - 12th August 2007, Kuala Lumpur Convention Centre, Malaysia. (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Nagoor, Anas B. (2007) Palm oil mill effluent: a novel source of natural bioactive compounds having high activity compared to synthetic scavengers. In: Kulliyyah of Engineering Research And Innovation Exhibition (KERIE 2007), 12th - 13th December 2007, Cultural Activity Centre (CAC), International Islamic University Malaysia. (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Shaibatul, Norhama and Hamzah, Norjadhilah (2007) Animal feed with added bioprotein from agro-industrial residue. In: International Exposition of Research and Inventions of Institutions of Higher Learning 2007 (PECIPTA'07) , 10th - 12th August 2007, Kuala Lumpur Convention Centre, Malaysia. (Unpublished)

Jamal, Parveen and Idris, Zulkarnain Mohamed and Alam, Md. Zahangir (2011) Evaluation of palm oil mill effluent treatment with concomitant Phenolics Prodcustion by Aspergillus niger IBS-103ZA. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

Jamal, Parveen and Ruqayyah, Tijani I.D. and Alam, Md. Zahangir and Mirghani, Mohamed Elwathig Saeed (2010) Ligninolytic activities of some Malaysian White Rot fungi. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, IIUM, Kuala Lumpur. (Unpublished)

Jamal, Parveen and Tompang, Mohamad Fahrurrazi and Alam, Md. Zahangir and Abdul Karim, Mohamed Ismail and Salleh, Hamzah Mohd. (2010) Bioprotein Production from Agricultural Waste and Cheaper Carbon Source: Fulfilling the Hope of Millions. In: National Biotechnology Seminar 2010, 24 - 26 May 2010, PWTC, Kuala Lumpur.

Jamal, Parveen and Wan Nawawi, Wan Mohd Fazli and Alam, Md. Zahangir (2011) Optimum Medium Components for Biosurfactant Production by Klebsiella pneumoniae WMF02 Utilizing Sludge Palm Oil as a Substrate. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Jebun, Nesa and Al-Mamun, Abdullah and Alam, Md Zahangir and Ahmad Raus, Raha (2015) Screening of fungal coagulants and their application to reduce turbidity of river water. In: The International Postgraduate Conference on Engineering Research (IPCER 2015), 27th-28th October 2015, Kuala Lumpur. (Unpublished)

Johar, Firdaus and Ariff, Tasnim Firdaus (2022) Mechanical and microstructural properties of hybrid bio-composites using microwaved coconut fibre and rice husk. In: 2nd International Conference on Recent Trends in Applied Research, ICoRTAR 2021, 8-9 October 2021, Online.

Kabbashi, Nassereldeen and Alam, Md. Zahangir (2010) Model fitting for biodiesel yield analysis from crude palm oil (CPO). In: 2ND INTERNATIONAL CONFERENCE ON ENVIRONMENTAL RESEARCH AND TECHNOLOGY 2010 (2ND ICERT 2010) , 2-4 June 2010, Penang, Malaysia.

Kabbashi, Nassereldeen and Mirghani, Mohamed Elwathig Saeed and Salleh, N. W. (2011) Mercury (II) removal using CNTS grown on GACs. In: 5th Kuala Lumpur International Conference on Biomedical Engineering 2011, 20-23 June 2011, Kuala Lumpur, Malaysia.

Kabbashi, Nassereldeen Ahmed and Abdul Karim, Mohamed Ismail and Saeed Mirghaini, Mohamed Elwathig and Yaacob, K. H. K. (2008) Application of carbon nanotubes for removal of copper ion from synthetic water. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008 (Biomed 2008), 25th-28th June 2008, Kuala Lumpur.

Kabbashi, Nassereldeen Ahmed and Mirghani, Mohamed Elwathig Saeed and Keya Nordin, Masturah (2013) A key of success to Empty Fruit Bunches, POME and water sludge: Composting. In: 15th Symposium of the Natural Products Research Network for Eastern and Central Africa (NAPRECA), 7-10 Dec 2013, Khartoum, Sudan.

Kabbashi, Nassereldeen Ahmed and Noruldin, Norzalina and Mirghani, Mohamed Elwathig Saeed (2013) Studies of locally Effective Microorganisms (EM) to enhance the degradation of empty fruit bunches, POME & cake during composting process. In: International Conference on Biotechnology Engineering (ICBioE 2013), 2 – 4 Jul 2013, Kuala Lumpur, Malaysia.

Kasim, Norhidayu and Abu Taib, K and Maturidi, A M A M and Wan Azahar, Wan Nur Aifa and Masjuki, Siti Aliyyah (2021) Debris Flow Numerical Simulation Model Comparison with Field Events in Kuala Kubu Baru and Lentang, Malaysia. In: The 5th International Conference on Advanced Technology and Applied Sciences (ICATAS) 2020, Virtual.

MAT NAWI, MOHD NAZIR and Husin, Hafiz (2019) Investigation on the effect of multiple passes in plain waterjet cleaning of paint. In: 4th International Manufacturing Engineering Conference (IMEC2019) & 5th Asia Pasific Conference On Manufacturing System (APCOMS 2019), The Everly Hotel, Putrajaya, Malaysia. (Unpublished)

Mamun, Abdullah Al (2022) Lab-scale physical modelling of common drainage inlets for better management of runoff from road surfaces. In: 5th International Conference On Civil and Environmental Engineering 2022 ( CENVIRON 2022), Pulau Pinang,Malaysia. (Unpublished)

Mansor, Mariatul Fadzillah (2021) Utilization of organic waste. In: Program STEM STE (Student-Teacher-Expert), 17-30 September & 25Oktober 2021, Virtual. (Unpublished)

Mansor, Mariatul Fadzillah and Adanan, Ahmad Iman Ikmal and Ahmad Tajuddin, Husna and Azmi, Azlin Suhaida (2023) Profiling anaerobic digestion stages from cafeteria food waste for production of biogas. In: International Conference on Chemical Engineering & Sustainability 2023 (ICCHES 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia (Hybrid).

Mat Nawi, Mohd Nazir and Husin, Hafiz and Gebremariam, M. A. and Azhari, Azmir (2020) Investigation on the effect of multiple passes in plain waterjet cleaning of paint. In: 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2019), 21st - 22nd August 2019, Putrajaya, Malaysia.

Mat Nawi, Mohd Nazir and Husin, Hafiz and Gebremariam, M. A. and Azhari, Azmir (2021) Optimisation of paint removal operation using waterjet cleaning process. In: 4th International Manufacturing Engineering Conference (IMEC 2019) & 5th Asia Pacific Conference of Manufacturing System (APCOMS 2019), 21-22 August 2019, The Everly Hotel, Putrajaya, Malaysia.

Mohamad, Amira Nadhirah and Rozhan, Arinah and Mahamad Suhaimi, Mohd. Faiz and Abu Bakar, Aniza and Hj Mohd Ariffin, Noor Aziah (2012) Contributing factors of urban heat island- an investigation on surface temperature of ground surface materials in three plazas with different types of landscape settings : a case study of plazas in Putrajaya. In: UMRAN2012: Green wave - undergraduate and postgraduate seminar, 3 May 2012, KAED, IIUM. (Unpublished)

Mohamad Ariff, Atikah Syahirah and Mat Husin, Noer Ezzati Balqis and Abu Bakar, Aniza and Hj Mohd Ariffin, Noor Aziah (2012) The impact of external environment on the internal thermal environment of the main prayer of Putra Mosque, Putrajaya. In: UMRAN2012: Green wave - undergraduate and postgraduate seminar, 3 May 2012, KAED, IIUM. (Unpublished)

Mohamed Ariff, Tasnim Firdaus and Sayadek, Mohd Shahril (2023) Wear analysis of titanium carbonitride in machining high strength steel (KRUPP 6582) using used palm oil as cutting fluid. In: 1st International Conference on Manufacturing Engineering Technology (IConMET 2021), Langkawi Island, Malaysia.

Mohd Adnan, Nur Yasmin and Rozali, Nur Fadhilah and Abu Bakar, Aniza and Abdul Malek, Nurhayati and Othman, Rosniza and Sanusi, Aliyah Nur Zafirah (2014) The impact of landscape setting and architectural element on the outdoor and indoor microclimate: a case study of Masjid Al-Mukarramah, Bandar Sri Damansara. In: UMRAN 2014 Seminar: Fostering Ecosphere in the Built Environment, 29th April 2014, Kulliyyah of Architecture and Environmental Design, IIUM.

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2016) CTAB-assisted precipitation synthesis of Ca(OH)2 sorbent for CO2 captures. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, Selangor.

Mohd. Din, Shamzani Affendy (2020) Carbon footprint assessment of the construction materials: challenges and future towards achieving better low-carbon nation. In: International Conference on Civil, Architecture and Pollution Control (ICCAPC 2020), 6-8 March, 2020, Academic Exchange Information Centre, China. (Unpublished)

Muda, Rahsidi Sabri and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Abdullah, Fatin Shahira (2021) Dam safety emergency action plan: a current practice for hydropower dam in Malaysia. In: 6th World Multidisciplinary Civil Engineering, Architecture: Urban Planning Symposium (WMCAUS 2021) ,, 14th-18th June 2021, Prague, Czech Republic.

Muhammad Suharni, Muhammad Luqman and Taib, Siti Noor Aifa and Shammodin, Muhammad Shaheed and Ahmad, Zuhairi (2017) Mapping land cover changes in Cherating, Pahang using gis. In: ASIA International Multidisciplinary Conference 2017 (AIMC 2017), 1-2 May 2017, Johor Bharu, Malaysia. (Unpublished)

Nagimeldin, Olla and Ahmad Tajuddin, Husna and Jami, Mohammed Saedi (2022) A review of Artificial Intelligence application of sustainable solid waste management practices in Western Asia. In: Global Cleanup Congress (GCC) 2022, 20 - 21 September 2022, IIUM.

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hassan, Masjuki and Bello, Kamilu Adeyemi (2023) Hybrid coating of titanium alloys via liquid additive manufacturing method: a review of recent advances. In: 6th International Conference on Mechanical, Automotive and Aerospace Engineering 2023 (ICMAAE '23), Kuala Lumpur, Malaysia. (Unpublished)

Noor Fazreen, D. and Noor Azmi, Azran Azhim (2014) Heavy metal concentration in sediment of Sarawak seawater. In: Fundamental Science Congress 2014, 14-21 August 2014, UPM.

Othman, Maizatulnisa and N., Hasmida and Halim, Zahurin and Jamal, Nur Ayuni and Khalid, Khalisanni and Zakaria, Noor Amalina and Al-Bat’hi, Souad A. M. (2018) Mechanical properties of gracilaria lichenoides reinforced bioplastic film. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Perelman, Lina and Wan Salim, Wan Wardatul Amani and Wu, Rouxi and Park, Joonhyeong and Ostfeld, Avi and Banks, M. Katherine and Porterfield, D.M (2013) Enhancing water distribution system security through water quality mobile sensor operation. In: World Environmental and Water Resources Congress 2013: Showcasing the Future, 2013, Cincinnati, Ohio, USA.

Rahman, Md Mujibur and Rahman, Haolia Y. and Awang, M. A.A. and Sopyan, Lis (2018) Effects of sintering time and temperature to the characteristics of FeCrAl powder compacts formed at elevated temperature. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Ramli, Muhammad Zahir (2023) Numerical techniques in coastal erosion study in Malaysia. In: MBOT Thursweb 2023, 13 July 2023, Ms Team. (Unpublished)

Salahuddin, Ahmad Shakirin and Ayob, Mohd Fairullazi (2023) Comparative life cycle cost analysis of solar panel systems different brands in Malaysia. In: INTERNATIONAL COMPETITION ON SUSTAINABLE EDUCATION 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Syed Azmi, Syarifah Farishaidayu and Ayob, Mohd Fairullazi (2023) Sustainable concrete: graphene enhanced concrete. In: International Competition on Sustainable Education 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Taib, Siti Noor Aifa and Mohamad Suharni, Muhammad Luqman and Shammodin, Muhammad Shaheed and Ahmad, Zuhairi (2017) Mapping mangrove distributions in Cherating river estuary, Pahang by using remote sensing. In: ASIA International Multidisciplinary Conference 2017 (AIMC 2017), 1st-2nd May 2017, Johor Bharu, Malaysia. (Unpublished)

Tijani, Ismaila and Jamal, Parveen and Alam, Md. Zahangir and Mirghani, Mohamed Elwathig Saeed (2009) Degradability index of novel locally isolated white rot fungi on agroindustrial wastes for production of animal feed. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE 2009), 12-13 December 2009, PWTC, Kuala Lumpur.

Wan Salim, Wan Wardatul Amani and Benoudjit, Abdel Mohsen and Ihda Uswah Solehah, Shohibuddin and Tumian, Afidalina (2019) Cyclic voltammetry and charge/discharge cycles of conductive polymer on screen-printed carbon and platinum electrodes in aqueous media. In: "4th International Conference on Advances in Manufacturing and Materials Engineering 2019", 30-31 October 2019, PICC, Putrajaya. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, D. T. and Dotchev, K. (2009) Effect of employing different grades of recycled polyamide 12 on the surface texture of laser sintered (LS) parts. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Zainan Nazri, Nurul Jannah and Fatah Yasin, Raudlotul Firdaus and Samsudin, Sofiah and Ghazali, Natirah Azira (2018) Cyclic process approach for disposing Islamic literature material in Malaysia: a study. In: 9th UUM International Legal Conference (ILC 2017), 23rd-24th September 2017, Sintok, Kedah.

Zainan Nazri, Nurul Jannah and Nik Mohd Kamal, Nik Nur Madihah and Jani, Mohd. Shah and Fatah Yasin, Raudlotul Firdaus (2018) A Shariah guide for sustainable energy production: Microbial Fuel Cells (MFCs) in focus. In: International Conference on Halal Innovation in Products and Services 2018 (i-CHIPS 2018), 13th-14th July 2018, Haat Yai, Songkhla, Thailand.

Zainudin, Zaki (2011) Visual plumes coastal dispersion modeling in south-west Sabah. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May, 2011, Kuala Lumpur.

Monograph

Ahmad, Zuhairi and Shammodin, Muhammad Shaheed and Abd. Hamid, Felza Zulhibri and Singh, Ranjit (2018) Flood management using 3-dimensional inundation map from gis spatial analyst; case study: Pekan sub-district. Research Report. UNSPECIFIED. (Unpublished)

Mohd Daud, Farah Diana (2020) Synthesis of hybrid nanosorbent CaO incorporated with MgO-SiO2 for enhancement CO2 capture performance and cyclic stability. Research Report. International Islamic University Malaysia, International Islamic University Malaysia. (In Press)

Zainan Nazri, Nurul Jannah and Gasmelsid, Saadeldin Mansour and Samsudin, Sofiah and Azman, Amelia Wong and Mohammed Yaqub, Mohammed Abullais Shamsuddin (2018) RIGS16-150-0314/ A pilot study on cyclic process approach for disposing Islamic literature material. Project Report. RMC, Kuala Lumpur. (Unpublished)