Items where Division is "Kulliyyah of Engineering" and Year is 2023

A

A., Shamitha and Crasta, Asha and Pathan, Khizer Ahmed and Khan, Sher Afghan (2023) Analytical and numerical simulation of surface pressure of an oscillating wedge at hypersonic Mach numbers and application of Taguchi's method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 15-30. ISSN 2462-1943

Aabid, Abdul and Baig, Muneer and Hrairi, Meftah (2023) Advanced composite materials for structural maintenance, repair, and control. Materials, 16 (2). pp. 1-3. ISSN 1996-1944

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Ibrahim, Yasser E. (2023) Review of piezoelectric actuator applications in damaged structures: challenges and opportunities. ACS Omega, 8 (3). pp. 2844-2860. ISSN 2470-1343

Aabid, Abdul and Ibrahim, Yasser and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2023) Optimization of structural damage repair with single and double-sided composite patches through the finite element analysis and Taguchi method. Materials, 16 (4). pp. 1-14. ISSN 1996-1944

Abd Hakim, Nur Wajihah and Salleh, Md. Noor and Al-Mamun, Abdullah and Ali, Maisarah and Ayob, Mohd Fairullazi and Sekaran, Thayalam and Ismail, Mohd Azmi and Mat Amin, Mohd Zaki (2023) Assessment of hydrological response of Pahang River Basin. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, Bandar Seri Begawan, Brunei Darussalam.

Abd Halim, Nor Farah Huda and Dahnel, Aishah Najiah and Gunasegaran, Umma Sankar and Lim, Joo Eng and Mohamad Amiruddin, M. S. and Tomadi, Siti Haryani (2023) Influence of cutting edge radius (CER) and width of cut (WOC) on tool wear in milling SUS 316 stainless steel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9—10 August, 2022, Kuala Lumpur.

Abd Halim, Nor Farah Huda and Mustafa, Aisyah Madihah and Shaharudin, N.S. and Dahnel, Aishah Najiah and Tomadi, Siti Haryani and Ahmad, Zuraida and Adesta, E.Y.T. and Rahman, M. (2023) Tool wear and wear mechanism of WC-Co End Mill during milling of CFRP in sustainable cutting conditions. Materials Science Forum, 1109. pp. 153-158. ISSN 0255-5476 E-ISSN 1662-9752

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2023) Mechanical and thermal properties of 3D printed polylactic acid reinforced alkaline lignin with epoxidized palm oil bio-composites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Abdul Latif, Samihah and Sidek, Khairul Azami and Hassan Abdalla Hashim, Aisha (2023) An efficient Iris recognition technique using CNN and Vision Transformer. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 235-245. ISSN 2462-1943

Abdul Nuri, Nur Aqila Syafiqa and Mohamad Puad, Noor Illi and Abduh, Muhammad Yusuf and Azmi, Azlin Suhaida (2023) Study of metabolic flux distribution in rice (Oryza sativa) cultures for starch production. Pertanika Journal of Science & Technology, 31 (1). pp. 109-121. ISSN 0128-7680 E-ISSN 2231-8526

Abdul Nuri, Nur Aqila Syafiqa and Mohamad Puad, Noor Illi and Azmi, Azlin Suhaida and Ahmad, Farah and Syed Abdul Rahman, Syarifah Nor Faizah (2023) Microalgae cultivation in flat panel photobioreactor as a method of carbon capture: a review. In: 6th International Conference on Clean Energy and Technology 2023, CEAT 2023, 7-8 June 2023, Hybrid.

Abdul Rahman, Nur Shazana and Abdul Rahim, Nadirah (2023) Sustainable framework for a geostationary satellite control earth station system using parallel configuration. Indonesian Journal of Electrical Engineering and Computer Science, 30 (3). pp. 1498-1508. ISSN 2502-4752 E-ISSN 2502-4760

Abdull Jalal Khan, Siti Mashitah and Lukman Hekiem, Nurul Liyana and Md Ralib @ Md Raghib, Aliza 'Aini and Saidin, Norazlina (2023) Pencil graphite on paper: facile approach for fabrication of flexible strain sensors. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Abdullah, M. Dzareeful F. and Wahid, Azni Nabela and Muthalif, Asan G. A. (2023) Development of shape memory alloy (SMA) based artificial muscle for application in soft gripper. Journal of Engineering Science and Technology, 18 (3). pp. 1413-1426. ISSN 1823-4690

Abdullah, Muhammad and Zainuddin, Mohamed Al-Sideque and Ahmad, Salmiah and Rossiter, John Anthony (2023) Performance comparison between centralized and hierarchical predictive functional control for adaptive cruise control application. International Journal of Automotive and Mechanical Engineering, 20 (4). pp. 10808-10820. ISSN : 2229-8649 E-ISSN 2180-1606

Abdullah Hashim, Azrul Azim and Ahmad, Salmiah and Abdul Ghani, Nor Maniha and Nasir, Ahmad Nor Kasruddin (2023) Integrated modelling and control of linear actuator based automatic pedal pressing mechanism for low-speed driving in a road traffic delay. International Journal of Robotics and Control Systems, 3 (3). pp. 485-500. E-ISSN 2775-2658

Abir, Intiaz Mohammad and Mohd Zaki, Hasan Firdaus and Mohd Ibrahim, Azhar (2023) Evaluation of simultaneous identity, age and gender recognition for crowd face monitoring. ASEAN Engineering Journal, 13 (1). pp. 11-20. E-ISSN 2586-9159

Abu Hassan, Nur Hudawiyah and Fadil, Nor Akmal and Jamal, Nur Ayuni and Mohd Daud, Farah Diana and Nordin, Norhuda Hidayah (2023) Decolorization kinetics of azo dye (methyl orange) in Fenton process with high entropy alloys as catalyst. Materials Science Forum, 1111. pp. 145-150. ISSN 0255-5476 E-ISSN 1662-9752

Abu Hassan, Nur Hudawiyah and Jami, Mohammed Saedi and Mohd Daud, Farah Diana and Jamal, Nur Ayuni and Nordin, Norhuda Hidayah (2023) Enhancement of fenton process using high entropy alloy powder as catalyst. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur.

Abu Hassan Zahri, Nur Nazihah and Nordin, Anis Nurashikin and Mohd Mansor, Ahmad Fairuzabadi and Ab. Rahim, Rosminazuin and Md Ralib @ Md Raghib, Aliza 'Aini and Suhaimi, Muhammad Irsyad and Lim, Lai Ming (2023) Biocompatibility assessment of wearable C/TPU/Tegaderm strain sensors. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Abushariah, Ahmad A. M. and Abushariah, Mohammad Abd-Alrahman Mahmoud and Gunawan, Teddy Surya and Chebil, Jalel and Alqudah, Assal Ali Mustafa and Ting, Hua-Nong and Mustafa, Mumtaz Begum Peer (2023) Fusion of speech and handwritten signatures biometrics for person identification. International Journal of Speech Technology, 26 (4). pp. 833-850. ISSN 1381-2416 E-ISSN 1572-8110

Adeola-Bello, Zulikha Ayomikun and Zainul Azlan, Norsinnira and Abu Hassan, Salmah Anim (2023) Control strategy forpowerassist upper limb rehabilitation robotwith the therapist’s motion intention prediction. IIUM Engineering Journal, 24 (1). pp. 285-300. ISSN 1511-788X E-ISSN 2289-7860

Ahmad, Kartini and Inche Ibrahim, Mohd Lukman (2023) Modeling organic light emitting diodes: a comparison between the conventional and a new carrier recombination models. In: 6th International Conference on Mathematical Applications in Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Ahmad, Mahmood and A. Al‑Zubi, Mohammad and Kubińska‑Jabcoń, Ewa and Majdi, Ali and Al-Mansob, Ramez Al-Ezzi Abduljalil and Sabri, Mohanad Muayad Sabri and Ali, Enas and Abdulrabb Naji, Jamil and Elnaggar, AshrafY and Zamin, Bakht (2023) Predicting California bearing ratio of HARHA‑treated expansive soils using Gaussian process regression. Scientific Reports, 13 (1). pp. 1-11. ISSN 2045-2322

Ahmad, Mohd Shahrulnizam and Rasit Ali, Roshafima and Mohamad, Zurina and Ahmad Tarmizi, Zatil Izzah and Ghazali, Siti Khairunisah and Munthoub, Dayangku Intan and A. Majid, Rohah and Ali, Fathilah and Hasham, Rosnani and Nazree, Anne Aleesa (2023) Fabrication of starch-based packaging materials. Physical Sciences Reviews. E-ISSN 2365-659X

Ahmad, Nadia Syuhada and Mamun, Abdullah Al and Nedjai, Radhia (2023) Assessment of expired coagulant for water treatment. In: 6th International Conference on Civil Engineering for Sustainable Development (ICCESD 2022), 10-12 February 2022, Khulna, Bangladesh.

Ahmad, Yasser Asrul (2023) Technical visit to IIUM Centre of Unmanned Technologies, International Islamic University Malaysia. Jurutera: The monthly Bulletin of the Institution of Engineers, Malaysia, August 2023. pp. 31-32. ISSN 0126-9909

Ahmad, Yasser Asrul and Abdul Hamid, Muhammad Nasrin Aqil and Abdullah, Khaizuran and Ismail, Ahmad Fadzil (2023) Lora performance evaluation in coherent Rayleigh fading channel. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Ahmad, Yasser Asrul and Kamaruddin, Nur Hazirah and Abdul Hamid, Muhammad Nasrin Aqil and Badron, Khairayu (2023) Q and V band dual offset feed parabolic antenna for satellite communication in equatorial region. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Ahmad Fuad, Fazia Adyani and Mazahari, Muhammad Aiman Arif and Ogu Salim, Nurhainis (2023) Repurposing natural products against Plasmodium Knowlesi lactate dehydrogenase via in Silico approach for antimalarial drug development. Chemical and Natural Resorces Engineering Journal, 7 (2). pp. 78-87. E-ISSN 2637-0719

Ahmed, Zeinab E. and Hassan Abdalla Hashim, Aisha and Saeed, Rashid A. and Saeed, Mamoon M. (2023) Mobility management enhancement in smart cities using software defined networks. Scientific African, 22. pp. 1-16. ISSN 2468-2276

Ahmed Khan, Shaheer and Rahman, Mohammed Ataur and Khan, Wajahat and Haider, Syed Mustafa (2023) Characterization and application of nano-composite zinc oxide/poly vinyl alcohol thin-film in solar cell performance enhancement. Journal of Mechanical Science and Technology, 37 (10). pp. 1-7. ISSN 1738-494X E-ISSN 1976-3824

Akbar, Muhammad Ali and Haja Mohideen, Ahmad Jazlan and Rashid, Muhammad Mahbubur and Mohd Zaki, Hasan Firdaus and Akhter, Muhammad Naveed and Embong, Abd Halim (2023) Solar thermal process parameters forecasting for evacuated tube collectors (ETC) based on RNN-LSTM. IIUM Engineering Journal, 24 (1). pp. 256-268. ISSN 1511-788X E-ISSN 2289-7860

Akhlaq, Adnan and Shaik Dawood, Mohd. Sultan Ibrahim and Jaffar Syed, Mohamed Ali and Sulaeman, Erwin (2023) A study on the effect of piezoelectric nonlinearity on the bending behaviour of smart laminated composite beam. Materials, 16 (7). pp. 1-19. E-ISSN 1996-1944

Akter, Khadiza and Motakabber, S. M. A. and Alam, A. H. M. Zahirul and Yusoff, Siti Hajar and Sajib, Ahmed and Annur, Tania (2023) Performance inspection of high gain chopper designed to extract optimum output of photovoltaic source. International Journal of Power Electronics and Drive Systems, 14 (4). pp. 2204-2216. ISSN 2088-8694

Al Hazza, Muataz Hazza Faizi and Zahari, Syahir and Bourini, Islam and Ismail, Md Yusof and Ali, Mohammad Yeakub and Adesta, Erry Y. T. (2023) Lean manufacturing and six sigma principles implementation in the industry: case study. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Online Conference.

Al Husaini, Mohammed Abdulla Salim and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2023) Utilizing deep learning for the real-time detection of breast cancer through thermography. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 5-16 August 2023, Kuala Lumpur, Malaysia.

Al Husaini, Mohammed Abdulla Salim and Habaebi, Mohamed Hadi and Suliman, F. M. and Islam, Md. Rafiqul and Elsheikh, Elfatih A. A. and Muhaisen, Naser A. (2023) Influence of tissue thermophysical characteristics and situ-cooling on the detection of breast cancer. Applied Sciences, 13 (15). pp. 1-36. E-ISSN 2076-3417

Al Mahmud, Suaib and Ismail, Ahmad Faris and Bappy, Jamirul Habib and Noor, Wazed Ibne (2023) A study on accuracy range of multiphase mixture model for turbulent convective heat transfer enhancement simulation of Water-Al2O3 Nanofluid. Journal of Nanofluids, 12 (2). pp. 438-447. ISSN 2169-432X E-ISSN 2169-4338

Al-Daas, Aseel and Azmi, Azlin Suhaida and Ali, Fathilah and Anuar, Hazleen (2023) The effect of alkaline treatment to pseudo-stem banana fibers on the performance of polylactic acid/ banana fiber composite. Journal of Natural Fibers, 20 (1). pp. 1-13. ISSN 1544-0478 E-ISSN 1544-046X

Al-Hady, Syed Mohammed Zakaria and Islam, Md Rafiqul and Rashid, Muhammad Mahbubur (2023) Development of IoT-based automated dynamic emergency response system against fire incidents in academic building. International Journal of Engineering Materials and Manufacture, 8 (4). pp. 75-87. E-ISSN 0128-1852

Al-Jumaily, Ahmed M. and Embong, Abd Halim and AL-Rawi, Mohammad and Mahadevan, Giri and Shukei, Sugita (2023) Aneurysm rupture prediction based on strain energy-CFD modelling. Bioengineering, 10 (10). pp. 1-16. E-ISSN 2306-5354

Al-Khatib, Ma'an Fahmi Rashid and Alqedra, Fadi I. A. and Alam, Md Zahangir (2023) Biodegradation of fats, oil and grease using microorganisms isolated from palm oil mill effluent. IIUM Engineering Journal, 24 (2). pp. 1-10. ISSN 1511-788X E-ISSN 2289-7860

Al-Mamun, Abdullah (2023) Solid-state fermentation for the production of bio-coagulant from microbes using rice bran. In: International Conference and Exhibition For Science (ICES2023), 06-08 February 2023, Riyadh. (In Press)

Al-Mamun, Abdullah and Nedjai, Radhia and Alam, Md Zahangir (2023) Scaling up the production of myco-coagulant using solid-state fermentation for water treatment. Malaysian Journal of Microbiology, 19 (Special Issue 6). pp. 777-785. ISSN 1823-8262 E-ISSN 2231-7538

Alam, Jubayer Abdullah Rafiul and Abu Talib, Abd Rahim and Altarazi, Yazan Sofyan Mohammed and Yusaf, Talal and Azami, Muhammad Hanafi and Nik Mohd, Nik Ahmad Ridhwan (2023) Experimental investigation on gas turbine engine performance using alternative fuel. Journal of Aeronautics, Astronautics and Aviation,, 55 (3S). pp. 479-483. ISSN 1990-7710

Alam, Md Zahangir (2023) Conversion of biomass into bioenergy for a sustainable circular bioeconomy: potential solution to the environmental issues. In: International Conference on Planning, Architecture & Civil Engineering (ICPACE 2023), 12th - 14th October 2023, Rajshahi, Bangladesh.

Alam, Md Zahangir and Kabbashi, Nassereldeen Ahmed and Mohd Sukri, Nur Atiqah Nabila and Abdullah, Nazurah (2023) A case study on assessment and rehabilitation of IIUM Pusu River for water quality improvement. In: IPN-ARC Conference 2023, Langkawi, Malaysia. (Unpublished)

Alam, Md Zahangir and Mohamed Ali, Amina and Jami, Mohammed Saedi (2023) Enhanced biogas production by anaerobic digestion of food waste using biofilm technology. In: Cradle to Cradle of Environment through Technology; A Sustainable Perspective; Incorporating Technologies into Environment. LifeVision Resources, Seremban, Negeri Sembilan, pp. 339-370.

Alam, Md. Moktarul and Islam, Md. Rafiqul and Koohestani, Mohsen and Elsheikh, Elfatih A. A. (2023) Prediction of time diversity gain for earth-to-satellite microwave link design based on real time rain intensity measurement. IEEE Access, 11. pp. 53588-53597. ISSN 2169-3536

Alam, Mohammad Shafiul and Rashid, Muhammad Mahbubur and Faizabadi, Ahmed Rimaz and Mohd Zaki, Hasan Firdaus and Alam, Tasfiq E. and Ali, Md Shahin and Gupta, Kishor Datta and Ahsan, Md Manjurul (2023) Efficient deep learning-based data-centric approach for autism spectrum disorder diagnosis from facial images using explainable AI. Technologies, 11 (5). pp. 1-27. E-ISSN 2227-7080

Alam, Mohammad Shafiul and Tasneem, Zabina and Khan, Sher Afghan and Rashid, Muhammad Mahbubur (2023) Effect of different modalities of facial images on ASD diagnosis using deep learning-based neural network. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (3). pp. 59-74. ISSN 2462-1943

Alasali, Usame and Azmi, Azlin Suhaida and Karaman, Isa and Alam, Md. Zahangir and Mohamad Puad, Noor Illi (2023) Lactic acid production by immobilized Rhizopus sp. IIUM-G05 in air pulsed ALR using agriculture waste substrates. Journal of Applied Horticulture, 25 (1). pp. 98-013. ISSN 0972-1045

Alawbali, Rakan Hatem Abbas and Mohamed Ariff, Tasnim Firdaus (2023) Enhancing the tool life of aluminium oxide (Al2O3) inserts using hybrid microwave energy in dry machining of high strength steel (KRUPP 6582). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Alghifari, Muhammad Fahreza and Gunawan, Teddy Surya and Kartiwi, Mira (2023) Development of sorrow analysis dataset for speech depression prediction. In: 2023 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2023, 22-25 May 2023, Kuala Lumpur, Malaysia.

Alhamada, Abdulrahman and Khalifa, Othman Omran and Abdul Rahman, Farah Diyana and Mohamad Nasir, Haidawati (2023) Secure key exchange for protecting health data Diffie-Hellman based approach. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Alhattab, Yousef Abd and Zainal Abidin, Zulkifli and Faizabadi, Ahmed Rimaz and Mohd Zaki, Hasan Firdaus and Ibrahim, Ahmad Imran (2023) Integration of stereo vision and MOOS-IvP for enhanced obstacle detection and navigation in unmanned surface vehicles. IEEE Access, 11. pp. 128932-128956. E-ISSN 2169-3536

Ali, Elmustafa Sayed and Saeed, Rashid A. and Eltahir, Ibrahim Khider and Khalifa, Othman Omran (2023) A systematic review on energy efficiency in the Internet of Underwater Things (IoUT): recent approaches and research gaps. Journal of Network and Computer Applications, 213. pp. 1-22. ISSN 1084-8045 E-ISSN 1095-8592

Ali Ibrahim Mze, Soumayat and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi and Ahmad, Farah and Abd Wahab, Mohd Firdaus and Sy Abd Rahman, Syarifah Nor Faizah (2023) CO2 solubilization in alkaline solvents. In: International Conference on Chemical Engineering & Sustainability 2023 (ICCHES 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia (Hybrid).

Allama, Oussama and Habaebi, Mohamed Hadi and Khan, Sheroz and Islam, Md. Rafiqul and Alghaihab, Abdullah (2023) Simulation and control design of a midrange WPT charging system for in-flight drones. Energies, 16 (15). pp. 1-19. ISSN 1996-1073

Alli, Yakubu Adekunle and Anuar, Hazleen and Manshor, Mohd Romainor and Bankole, Owolabi Mutolib and Abd Rahman, Nurul Amirah and Olatunde, Simeon Kayowa and Omotola, Elizabeth Oyinkansola and Oladoye, Peter Olusakin and Ejeromedoghene, Onome and Suhr, Jonghwan and Sukindar, Nor Aiman and Mohd Nasir, Nur Aimi (2023) Influence of nanocomposites in extrusion-based 3D printing: a review. Hybrid Advances, 3. pp. 1-10. ISSN 2773-207X

Alli, Yakubu Adekunle and Oladoye, Peter Olusakin and Matebese, Funeka and Senehi, Naomi L. and Alimi, Oyekunle Azeez and Ogunlaja, Adeniyi Sunday and Abdi, Fatwa F. and Anuar, Hazleen and Adeleye, Adeyemi S. and Philippot, Karine (2023) Step-scheme photocatalysts: promising hybrid nanomaterials for optimum conversion of CO2. Nano Today, 53 (1). pp. 1-30. ISSN 1748-0132 E-ISSN 1878-044X

Alli, Yakubu Adekunle and Oladoye, Peter Olusakin and Onawole, Abdulmujeeb T. and Anuar, Hazleen and Adewuyi, Sheriff and Ogunbiyi, Olutobi Daniel and Philippot, Karine (2023) Photocatalysts for CO2 reduction and computational insights. Fuel, 344. pp. 1-18. ISSN 0016-2361 E-ISSN 1873-7153

Amerai Khan, Nur Amnatasha and Shahbuddin, Munira and Busra, Mohd Fauzi (2023) Modulation of thermal properties of bovine collagen scaffold using variation of fabrication template. Biological and Natural Resources Engineering Journal, 7 (1). pp. 35-42. E-ISSN 2637-0719

Amir, Adibah and Ahmad, Zuraida and Toha @ Tohara, Siti Fauziah and Hasbullah, Nurul Fadzlin and Mel, Maizirwan and Haji Hassan, Masjuki and Ismail, Md Yusof (2023) Enhancing engineering ethics understanding: impact of the teaching and learning approaches and curriculum. In: 6th International Conference on Engineering Professional Ethics and Education 2023 (ICEPEE'23), 15th - 16th August 2023, Virtual Conference.

Amran, Amirul Aiman Ali and Lim, Ying Chin and Azman, Nurasyiqin and Jafar, Nurfadhilah and Mohd, Yusairie and Ab Rahim, Rosminazuin and Nordin, Anis Nurashikin and Mohd Zain, Zainiharyati (2023) Gold nanoparticle deposited on screen-printed carbon electrode for electrochemical detection of nicotine in e-cigarette. Malaysian Journal of Chemistry, 25 (2). pp. 1-12. E-ISSN 2550-1658

Anjum, Asraar and Shaikh, Abdul Aabid and Hrairi, Meftah (2023) Analysis of damage control of thin plate with piezoelectric actuators using finite element and machine learning approach. Frattura ed Integrita Strutturale, 17 (66). pp. 112-126. E-ISSN 1971-8993

Anuar, Hazleen and Abd Rahman, Nurul Amirah and Manshor, Mohd Romainor and Alli, Yakubu Adekunle and Alimi, Oyekunle Azeez and Alif, Fathilah and Suhr, Jonghwan (2023) Novel soda lignin/PLA/EPO biocomposite: a promising and sustainable material for 3D printing filament. Materials Today Communications, 35. pp. 1-14. ISSN 2352-4928

Anuar, Hazleen and Yakubu Adekunle, Alli (2023) A call to action: building sustainable environment for the people and the planet. e-estidotmy: memperkaya minda dengan STEM.

Arab, Sonia Hadj and Alam, Md Zahangir and Yusof, Faridah and Elgharbawy, Amal A.M. (2023) Identification and optimization of enzymes extracted from solid-state fermention. Journal of Agrobiotechnology, 14 (2). pp. 12-27. E-ISSN 2180-1983

Arab, Sonia Hadj and Alam, Md. Zahangir and Yusof, Faridah and Elgharbawy, Amal A.M. (2023) Optimization and characterization of free and cross-linked enzymes aggregate from solid-state fermented materials. Biological and Natural Resources Engineering Journal, 7 (1). pp. 43-57. E-ISSN 2637-0719

Arbi Shukhair, Nur Liyana Ameera and Mansor, Hasmah and Gunawan, Teddy Surya and Abdul Kadir, Kushsairy (2023) Enhancing public transportation detection using YOLOv5. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Arief, Rudi Kurniawan and Sukindar, Nor Aiman and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2023) Analysis of the adjusting bolts system’s contribution to levelling error of the heated bed in FDM 3D printer. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kuala Lumpur.

Ariff, Tasnim Firdaus and Zakaria, Azriena Nathasa (2023) Mechanical and structural properties of epoxy bio-composite using fish bones as bio-filler. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, KualaLumpur.

Asem, Maimunah and Jimat, Dzun Noraini and Jafri, Nur Huda Syazwani and Wan Nawawi, Wan Mohd Fazli and Mohamed Azmin, Nor Fadhillah and Abd Wahab, Mohd Firdaus (2023) Entangled cellulose nanofibers produced from sugarcane bagasse viaalkaline treatment, mild acid hydrolysis assisted with ultrasonication. Journal of King Saud University - Engineering Sciences (JKSUES), 35 (1). pp. 24-31. ISSN 1018-3639

Asgari, Nasrin and Avakh Darestani, Soroush and Ismail, Md Yusof and Ahmadpour, Leila (2023) Balanced scorecard model based on quality management system requirements: evidence from the Iranian ferro industry. International Journal of Business Excellence. ISSN 1756-0047 E-ISSN 1756-0055 (In Press)

Ashraf, Arselan and Gunawan, Teddy Surya and Arifin, Fatchul and Kartiwi, Mira and Sophian, Ali and Habaebi, Mohamed Hadi (2023) Enhanced emotion recognition in videos: a convolutional neural network strategy for human facial expression detection and classification. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (1). pp. 286-299. ISSN 2089-3272

Ashraf, Arselan and Sophian, Ali and Shafie, Amir Akramin and Gunawan, Teddy Surya and Ismail, Norfarah Nadia (2023) Machine learning-based pavement crack detection, classification, and characterization: a review. Bulletin of Electrical Engineering and Informatics, 12 (6). pp. 3601-3619. ISSN 2089-3191 E-ISSN 2302-9285

Ashraf, Arselan and Sophian, Ali and Shafie, Amir Akramin and Gunawan, Teddy Surya and Ismail, Norfarah Nadia and Bawono, Ali Aryo (2023) Efficient pavement crack detection and classification using custom YOLOv7 model. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (1). pp. 119-132. ISSN 2089-3272

Ashraf, Qazi Mamoon and Tahir, Mohammad and Habaebi, Mohamed Hadi and Isoaho, Jouni (2023) Towards autonomic Internet of Things: recent advances, evaluation criteria, and future research directions. IEEE Internet of Things Journal, 10 (6). pp. 14725-14748. ISSN 2372-2541 E-ISSN 2327-4662

Asmaly, Hamza A. and Kabbashi, Nassereldeen Ahmed and Al-Khatib, Ma'an Fahmi Rashid and Alam, Md. Zahangir and Sulaman, Adam (2023) The effect of acid modification on adsorption of ortho-nitrophenol from aqueous solution by multi wall carbon nanotubes and conical carbon nanofibers: characterization, modelling and performance. Biological and Natural Resources Engineering Journal, 7 (1). pp. 58-90. E-ISSN 2637-0719

Asmaly, Hamza A. and Kabbashi, Nassereldeen Ahmed and Al-Khatib, Ma'an Fahmi Rashid and Alam, Md. Zahangir and Yassin, Mohamed A. (2023) Capabilities of Novel Carbon Nano Adsorbents in Evaluating the Extraction of 2-NP and HM from aqueous solutions. Knowledge-based Engineering and Sciences, 4 (3). pp. 34-53. ISSN 2788-7820 E-ISSN 2289-7839

Assaig, Faisal Ahmed and Gunawan, Teddy Surya and Nordin, Anis Nurashikin and Ab. Rahim, Rosminazuin and Mohd Zain, Zainihariyati and Hamidi, Eki Ahmad Zaki (2023) Deep learning-based high performance intrusion detection system for imbalanced datasets. In: 2023 9th International Conference on Wireless and Telematics (ICWT), 6-7 July 2023, Solo, Indonesia.

Assaig, Faisal Ahmed and Gunawan, Teddy Surya and Nordin, Anis Nurashikin and Ab. Rahim, Rosminazuin and Mohd Zain, Zainiharyati (2023) Design and development of an intuitive desktop application for rapid SARS-CoV-2 diagnosis using electrochemical potentiostat. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023, 15-16 August 2023, Kuala Lumpur, Malaysia.

Assaig, Faisal Ahmed and Gunawan, Teddy Surya and Nordin, Anis Nurashikin and Ab. Rahim, Rosminazuin and Mohd Zain, Zainiharyati and Mohd Zain, Rozainanee and Arifin, Fatchul (2023) Development and evaluation of a high-performance electrochemical potentiostat-based desktop application for rapid SARS-CoV-2 testing. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (2). pp. 349-365. ISSN 2089-3272

Azahari, Nur Najma Athirah and Anuar, Hazleen and Hassan, Azman and Jawaid, Mohammed and Halim, Zahurin and Samsudin, Sani Amril (2023) Mechanical properties of magnesium hydroxide/halloysite nanotubes reinforced polyamide 11 nanocomposites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Azahari, Nur Najma Athirah and Anuar, Hazleen and Hassan, Azman and Jawaid, Mohammed and Halim, Zahurin and Samsudin, Sani Amril (2023) Thermal, dynamic mechanical, mechanical and flammability properties of halloysite nanotubes filled polyamide 11 nanocomposites. Malaysian Journal of Fundamental and Applied Sciences, 19 (2). pp. 173-193. ISSN 2289-5981 E-ISSN 2289-599X

Azhar, Anisah Farzana and Nordin, Nor Hidayati Diyana and Mohd, Farah Natashah and Azmi, Nur Liyana (2023) Investigation of optimum reclining angles for wheelchair recliners during dental treatment. Applied Research and Smart Technology (ARSTech), 4 (1). pp. 33-42. ISSN 2722-9637 E-ISSN 2722-9645

Azhari, Azmir and Idriss, A. N. M. and Maleque, Md. Abdul (2023) Comparative study on performance characteristics of modified alloy steels by TIG and water jet peening processes. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Azhari, Elsa and Aliredjo, Muhamad Subroto and Heri Purnomo, Agus and Damat, Damat and Mel, Maizirwan and Krido Wahono, Satriyo and Suherman, Suherman and Yandri, Erkata (2023) Sterilization of ready to serve product for special needs of hajj and umrah: skipjack tuna in a retort pouch package. In: 3rd International Conference on Natural Resources and Life Sciences (NRLS) 2020, 23rd - 24th September 2020, Virtual, Online.

Aziding, Khairunnisa and Badron, Khairayu and Basri, Atikah Balqis and Ismail, Ahmad Fadzil and Ahmad, Yasser Asrul (2023) Enhanced technique for prediction of Z-R relationship in tropical region. In: 2023 12th International Conference on Information and Electronics Engineering (ICIEE 2023), 18/02/2023 - 20/02/2023, Jeju, South Korea.

Azman, Amelia Wong (2023) Watching the IIUM tide. In: International Islamic University Malaysia at 40: Leading the Way. IIUM Press, Kuala Lumpur, pp. 295-307. ISBN 9789674913267

Azman, Amelia Wong and Abdul Ghani, Zurina and Musa, Muhammad Adli and Wan Zulkifle, Wan Zahidah and Mohd Mustafah, Yasir (2023) Humanising leadership: transforming the education landscape. Office of Knowledge for Change and Advancement (KCA), Kuala Lumpur.

Azmi, Nur Hanisah and Nordin, Anis Nurashikin and Suhaimi, Muhammad Irsyad and Meng, Lim Lai and Ab Rahim, Rosminazuin and Bashri, Mohd Saiful Riza and Samsudin, Zambri (2023) Portable data acquisition and fluidic system for electrochemical Sensors. In: 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 22-25 May 2023, Kuala Lumpur.

B

B, Arun Kumar and C, Daniel and V, Amudhan and Devarajan, Sandya and Md. Kassim, Tahara Ramadzan and E, Arunraj and A, Arun Solomon (2023) Energy consumption of composite structure in various regions in India: a BIM approach. Civil Engineering and Architecture, 11 (4). pp. 1776-1794. ISSN 2332-1091 E-ISSN 2332-1121

Baba, Tamana and Hasbullah, Nurul Fadzlin and Saidin, Norazlina (2023) Degradation of InGaN LEDs by proton radiation. In: 8th International Conference on Business and Industrial Research (ICBIR 2023), 18th - 19th May 2023, Bangkok, Thailand.

Babiker, Asaad Balla Falelmula and Habaebi, Mohamed Hadi and Mubarak, Sinil and Islam, Md. Rafiqul (2023) A detailed analysis of public industrial control system datasets. International Journal of Security and Networks, 18 (4). pp. 245-263. ISSN 1747-8405 E-ISSN 1747-8413

Badrol Hisham, Balqis Nurnadia and Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Tung, Lun Hao and Ab Rahim, Rosminazuin and Mohd Zain, Zainiharyati (2023) Performance evaluation of Laser-Induced Screen Printed Electrodes for electrochemical detection. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Badruhisham, Saidatul Haneen and Abu Hanifah, Mohd Shahrin and Yusoff, Siti Hajar and Hasbullah, Nurul Fadzlin and Yaacob, Mashkuri (2023) Voltage control of hybrid energy sources for microgrid employing biomass-solar-wind. International Journal of Power and Energy Conversion, 13 (3-4). pp. 1-18. ISSN 1757-1154 E-ISSN 1757-1162

Balla, Asaad and Habaebi, Mohamed Hadi and Elsheikh, Elfatih A. A. and Islam, Md. Rafiqul and Suliman, F.M. (2023) The effect of dataset imbalance on the performance of SCADA intrusion detection systems. Sensors, 23 (2). pp. 1-13. E-ISSN 1424-8220

Barakat, Mohammed Elmogtaba and Saeed, Rashid A. and Barakat, Mohammed and Edam, Salaheldin and Khalifa, Othman Omran (2023) Performance evaluation of coherent MIMO radar assisted with space-time coding. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Bashir, Musavir and Parvathy, Rajendran and Khan, Ambareen and Vijayanandh, Raja and Khan, Sher Afghan (2023) Numerical investigation of turbulence models with emphasis on turbulent intensity at low Reynolds number flows. Advances in Aircraft and Spacecraft Science, 10 (4). pp. 1-13. ISSN 2287-528X E-ISSN 2287-5271

Beroual, Sabir and Hrairi, Meftah (2023) Electromechanical impedance simulation-based evaluation of cracks in photovoltaic solar cells. Arabian Journal for Science and Engineering. pp. 1-17. ISSN 2193-567X E-ISSN 2191-4281

Bin Idrus, Mohammad Ariff Zakwan and Abdul Rahman, Farah Diyana and Khalifa, Othman Omran and Md Yusoff, Nelidya (2023) Blockchain-based security for cloud data storage. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Boughou, Smail and Omar, Ashraf Ali and Elsayed, Omer Ali and Mohammed Aldheeb, Mohammed Abdulmalek (2023) Numerical investigation on the aerodynamics of high-lift and bird-like low Reynolds number airfoils. Progress in Computational Fluid Dynamics, 23 (3). pp. 146-162. ISSN 1468-4349 E-ISSN 1741-5233

Bouleghebar, Yasmina and Bentchikou, M. and Boukendakdji, O. and El-Hadj, K. and Debieb, F. and Ali, Maisarah (2023) The effect of brick and glass powder on the mechanical properties and porosity of self-compacting mortar. Journal of Applied Engineering Sciences, 13 (1). pp. 39-52. ISSN 2247-3769 E-ISSN 2284-7197

Budalal, Asma Ali and Islam, Md. Rafiqul (2023) Path loss models for outdoor environment—with a focus on rain attenuation impact on short-range millimeter-wave links. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 3. pp. 1-11. ISSN 2772-6711

Budalal, Asma Ali and Islam, Md. Rafiqul (2023) The probabilistic component of outdoor millimeter wave propagation path loss model considering rain fade. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 15-16 August 2023, Kuala Lumpur.

C

Crasta, Asha and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Reddy, Chamakura Abhinav (2023) Stiffness derivative for a non-planar wedge in Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

D

Dahnel, Aishah Najiah and Faris, Muhammad Firas and Azman, Mohamad Anas Fikri (2023) Hardness and microstructural analysis of recycled aluminum 7075. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Deb, Nibedita and Alam, Md. Zahangir and Rahman, Tawfikur and Al-Khatib, Ma'an Fahmi Rashid and Jami, Mohammed Saedi and Mansor, Mariatul Fadzillah (2023) Acid–base pretreatment and enzymatic hydrolysis of palm oil mill effluent in a single reactor system for production of fermentable sugars. International Journal of Polymer Science, 2023. pp. 1-15. ISSN 1687-9422 E-ISSN 1687-9430

Deb, Nibedita and Alam, Md. Zahangir and Rahman, Tawfikur and Jami, Mohammed Saedi and Mansor, Mariatul Fadzillah and Tajuddin, Husna Ahmad (2023) Design and analysis of a fuel cell and batteries in energy production for electric vehicle. Iranian (Iranica) Journal of Energy & Environment, 14 (3). pp. 301-313. ISSN 2079-2115 E-ISSN 2079-2123

Djemana, Mohamed and Hrairi, Meftah (2023) Real-time structural damage detection using EMI under varying load a and temperature conditions. In: 7th International Conference on Technology, Engineering and Science, IConTES 2023, 16-19 November 2023, Antalya/Turkey.

E

Eid, Iyad M. Y. and Sophian, Ali (2023) Badai Al-Aqsha: hari yang mengubah keseimbangan kekuatan Israel-Palestina. Nasional News.

Elagib, Tienah H. H. and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Al-Khatib, Ma'an Fahmi Rashid and Mirghani, Mohamed Elwathig Saeed and Hassan, Elwathig A. M. (2023) The performance of heteroatom-doped carbon nanotubes synthesized via a hydrothermal method on the oxygen reduction reaction and specific capacitance. Journal of Electrochemical Science and Engineering, Nanomaterials Special Issue. pp. 1-14. ISSN 1847-9286

Elnour, Razan A. M. and Ali, Elmustafa Sayed and Yousif, Ibtihal and Saeed, Rashid A. and Mokhtar, Rania A. and Hayder, Gasim and Khalifa, Othman Omran (2023) Social Internet of Things (SIoT) localization for smart cities traffic applications. In: International Conference on Science Engineering Technology and Sustainability, SETS 2021, Virtual conference.

Elshebani, Mohamed Salem and Ali, Yahya and Azroug, Nser and Khalifa, Ramdan A. M. and Khalifa, Othman Omran and Saeed, Rashid A. (2023) Convolutional neural networks with feature fusion method for automatic modulation classification. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Embong, Abd Halim and Ambotang, Asyrah Shahierah and Abdul Hamid, Syamsul Bahrin (2023) Facial recognition and thermal imaging: a cost-effective solution for Covid-19 detection. Journal of Integrated and Advanced Engineering, 3 (2). pp. 127-140. ISSN 2774-602X E-ISSN 2774-6038

Embong, Abd Halim and Yahya, Fatin Diyana and Rashid, Muhammad Mahbubur (2023) Study on smart downtime monitoring system in glove production. International Journal of Engineering Materials and Manufacture, 8 (4). pp. 124-131. E-ISSN 0128-1852

F

Fayaz, Hussain and Shaik, Saboor and Khan, Sher Afghan and Huynh, Van Van and Jilte, Ravindra D. and Sundara, Vikram and Asif, Mohammad and Linul, Emanoil (2023) Transient solidification and melting numerical simulation of lauric acid PCM filled stepped solar still basin used in water desalination process. Case Studies in Thermal Engineering, 49. pp. 1-16. E-ISSN 2214-157X

Fellah, Maroua and Alam, Md. Zahangir and Mamun, Abdullah Al and Kabbashi, Nassereldeen Ahmed and Engliman, Nurul Sakinah (2023) Effect of the lignocellulolytic substrates and fermentation process parameters on myco-coagulant production for water treatment. IIUM Engineering Journal, 24 (1). pp. 13-26. ISSN 1511-788X E-ISSN 2289-7860

G

Ghazali, Mazlinah and Idris, Mohd Norhaedir and Ruslan, Rohayah and Ahmad, Siti Hawa and Basharudin, Azmi (2023) Significant effects on sharing class notes and materials using Study Jom application among students. In: Conference on Future and Sustainable Education 2022, Gambang, Pahang, Malaysia.

Gunawan, Teddy Surya and Kartiwi, Mira and Saifudin, Ali and Nur, Levy Olivia and Nugroho, Bambang Setia (2023) Optimizing livestock productivity with computer vision-based cow estrus detection in free stall barns using various YOLOv8 models. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Gunawan, Teddy Surya and Mansor, Hasmah and Kartiwi, Mira and Md Yusoff, Nelidya (2023) Palm fruit ripeness detection and classification using various YOLOv8 models. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Gunawan, Teddy Surya and Mohd Sarif, Muhammad Rusydy and Kartiwi, Mira and Ahmad, Yasser Asrul (2023) Development of U-Net architecture for audio super resolution. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

H

Haddad, Alaa and Habaebi, Mohamed Hadi and Suliman, Fakher Eldin M. and Elsheikh, Elfatih A. A. and Islam, Md. Rafiqul and Zabidi, Suriza Ahmad (2023) Generic patient-centered blockchain-based EHR management system. Applied Sciences, 13 (3). pp. 1-19. E-ISSN 2076-3417

Haji Hassan, Masjuki and M., Gulzar and M. A., Kalam and N. W. M., Zulkifli and Maleque, Md. Abdul and M. S. S., Malik and A., Arslan (2023) Engine tribology: enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings: Technologies and Applications. CRC Press, Boca Raton, pp. 221-254.

Hakim, Arif Rahman and Ramli, Kalamullah and Gunawan, Teddy Surya and Windarta, Susila (2023) A novel digital forensic framework for data breach investigation. IEEE Access, 11. pp. 42644-42659. E-ISSN 2169-3536

Hakim, Galang P. N. and Habaebi, Mohamed Hadi and Elsheikh, Elfatih A. A. and Fakhereldin M., Suliman and Islam, Md. Rafiqul and Yusoff, Siti Hajar and Adesta, Erry Yulian T. and Anzum, Rabeya (2023) Levenberg Marquardt artificial neural network model for self organising networks implementation in wireless sensor network. IET Wireless Sensor Systems. pp. 1-14. ISSN 2043-6386 E-ISSN 2043-6394

Hakim, Galang Persada Nurani and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul and Alghaihab, Abdullah and Yusoff, Siti Hajar and Adesta, Erry Yulian Triblas (2023) Self-Organized Wireless Sensor Network (SOWSN) for dense jungle applications. IEEE Access. E-ISSN 2169-3536

Halomoan, Junartho and Ramli, Kalamullah and Sudiana, Dodi and Gunawan, Teddy Surya and Salman, Muhammad (2023) ECG-based driving fatigue detection using heart rate variability analysis with mutual information. Information, 14 (10). pp. 1-41. E-ISSN 2078-2489

Halomoan, Junartho and Ramli, Kalamullah and Sudiana, Dodi and Gunawan, Teddy Surya and Salman, Muhammad (2023) A new ECG data processing approach to developing an accurate driving fatigue detection framework with heart rate variability analysis and ensemble learning. Information, 14 (4). pp. 1-25. ISSN 2078-2489

Hamisa, Abdul Hamid and Wan Hamzah, Wan Azmi and Ismail, Mohd Farid and Ab. Rahim, Rosminazuin and Muhammad Ali, Hafiz (2023) Tribology performance of polyol-ester based TiO2, SiO2, and their hybrid nanolubricants. Lubricants, 11 (1). pp. 1-20. E-ISSN 2075-4442

Hamza, Manar Ahmed and Hassan Abdalla Hashim, Aisha and Alsolai, Hadeel and Gaddah, Abdulbaset and Othman, Mahmoud and Yaseen, Ishfaq and Rizwanullah, Mohammed and Zamani, Abu Sarwar (2023) Wearables-assisted smart health monitoring for sleep quality prediction using optimal deep learning. Sustainability, 15 (2). pp. 1-14. ISSN 2071-1050

Hasan, Ahmad and Motakabber, S. M. A. and Alam, A. H. M. Zahirul (2023) Dual–adaptive redundancy minimisation-based channel estimation method for MIMO OFDM systems. Asian Journal of Electrical and Electronic Engineering, 3 (1). pp. 20-26. E-ISSN 2785-8189

Hasan, Ahmad and Motakabber, S. M. A. and Habaebi, Mohamed Hadi and Anwar, Farhat (2023) An adaptive channel estimation scheme based on redundancy minimization for filtered OFDM networks. TELKOMNIKA Telecommunication Computing Electronics and Control, 21 (1). pp. 70-76. ISSN 1693-6930 E-ISSN 2087-278X

Hasan, Mohammad Mainul and Saleh, Tanveer and Sophian, Ali and Rahman, M. Azizur and Huang, Tao and Mohamed Ali, Mohamed Sultan (2023) Experimental modeling techniques in electrical discharge machining (EDM): a review. International Journal of Advanced Manufacturing Technology, 127 (5-6). pp. 2125-2150. ISSN 0268-3768 E-ISSN 1433-3015

Hasan, Muhammad Wasif and Alam, A. H. M. Zahirul (2023) Effect of inductor for designing an inverter to maximize solar panel power output. Asian Journal of Electrical and Electronic Engineering, 3 (1). pp. 34-40. E-ISSN 2785-8189

Hasni, Mohd Haffizi and Ahmad, Farah and Athoillah, Ahdyat Zain (2023) The production of microbial biodiesel from cellulose-derived fungal lipid via consolidated bioprocessing. Environmental Technology & Innovation, 30. pp. 1-10. ISSN 2352-1864

Hassan, Mohamed and Saeed, Rashid A. and Mokhtar, Rania A. and Hamid, Khalid and Ali, Elmustafa Sayed and Odeh, Nidhal and Singh, Manwinder and Khalifa, Othman Omran and Islam, Shayla (2023) NOMA cooperative spectrum sharing average capacity improvement in 5G network. In: 2023 IEEE 3rd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), Benghazi, Libya.

Hassan, Mohamed A. M. and Abdalla, Omar H. and Fayek, Hady H. and Hassan Abdalla Hashim, Aisha and Toha, Siti Fauziah (2023) Optimal WAMS configuration in nordic power system. IJCSNS International Journal of Computer Science and Network Security, 23 (3). pp. 130-138. ISSN 1738-7906

Hassan, Mona Bakri and Saeed, Rashid A. and Khalifa, Othman Omran and Sayed Ali, Elmustafa and Mokhtar, Rania A. (2023) Performance evaluation of D2D communications in of LTE-A network. In: 2023 IEEE 3rd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), 21-23 May 2022, Benghazi, Libya.

Haszerin, Muhammad Na'iim and A. Raof, Natasha and M Zamre, M K A and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2023) Machining performance of carbide insert in turning aluminum alloy 7075-T651. In: International Conference on Manufacturing Engineering Technology (ICONMET 2021), 14-15 July 2021, Asenia Resort, Langkawi, Malaysia.

Hazlan, Mohamed Alfian Al-Zikry and Gunawan, Teddy Surya and Yaacob, Mashkuri and Kartiwi, Mira and Arifin, Fatchul (2023) Design and performance analysis of a fast 4-way set associative cache controller using Tree Pseudo Least Recently Used algorithm. Indonesian Journal of Electrical Engineering and Informatics, 11 (4). pp. 1050-1062. E-ISSN 2089-3272

Hazmi, Alia Tasnim and Ahmad, Farah and Mohd Hatta, Maziati Akmal and Md Ralib @ Md Raghib, Aliza 'Aini and Ali, Fathilah (2023) Fungal chitosan for potential application in piezoelectric energy harvesting: review on experimental procedure of chitosan extraction. Alexandria Engineering Journal, 67. pp. 105-116. ISSN 1110-0168

Husnina, Nur and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer and Shaiq, Istiyaq Mudassir (2023) Passive control of base pressure in a converging-diverging nozzle with area ratio 2.56 at mach 1.8. Fluid Dynamics and Manufacturing Process, 19 (3). pp. 569-577. ISSN 1555-256X E-ISSN 1555-2578

Hussein, Loay F. and Abass, Islam Abdalla Mohamed and Aissa, Anis Ben and Hassan Abdalla Hashim, Aisha and Alzahrani, Ahmad A. and Alharithi, Fahd S. (2023) A comprehensive cost performance analysis for a QoS-based scheme in network mobility (NEMO). Alexandria Engineering Journal, 76. pp. 349-360. ISSN 1110-0168 E-ISSN 2090-2670

I

Ibrahim, Aisyah and Toha, Siti Fauziah and Idris, Ahmad Syahrin and Nordin, Nor Hidayati Diyana (2023) Miniaturised robotic guide dog: for visually impaired travelling assistance. Persatuan Saintis Muslim Malaysia (PERINTIS), Seri Kembangan, Selangor.

Ibrahim, Aisyah and Toha, Siti Fauziah and Nordin, Nor Hidayati Diyana and Tokhi, Mohammad Osman (2023) Enhancing accessibility: assistive devices pairing mobile apps for visually impaired people. PLATFORM - A Journal of Engineering, 7 (3). pp. 32-39. ISSN 2600-8424 E-ISSN 2636-9877

Ideris, Muhammad Haziq and Kamaruddin, Shafie and Sulaiman, Mohd Hafis and Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani and Md Yasir, Ahmad Shah Hizam (2023) Effects of coating and lubrication on friction and wear for metal-to metal application. Journal of Advanced Research in Applied Mechanics, 110 (1). pp. 52-62. E-ISSN 2289-7895

Iftekar, Syed Fouzan and Aabid, Abdul and Amir, Adibah and Baig, Muneer (2023) Advancements and limitations in 3D printing materials and technologies: a critical review. Polymers, 15 (11). pp. 1-23. ISSN 2073-4360

Iftekar, Syed Fouzan and Sukindar, Nor Aiman and Amir, Adibah and Azami, Muhammad Hanafi and Aabid, Abdul (2023) Enhancing metal 3D printing with fused deposition modeling - a short review. International Journal of Research and Analytical Reviews (IJRAR), 10 (2). pp. 424-428. ISSN 2349-5138 E-ISSN 2348-1269

Illias, Suhaimi and Hussain, Suhaila and Ishak, Mohamad Shaiful Ashrul and Abdul Rahman, Md. Tasyrif and Awang @ Hasyim, Syamsul Syahrun and Selamat, Salsuwanda and Ani, Mohd Hanafi (2023) Single droplet size and volume measurement – comparison between experiment and theory. Journal of Mechanical Engineering, 20 (1). pp. 233-243. ISSN 1823-5514 E-ISSN 2550-164X

Inche Ibrahim, Mohd Lukman (2023) A physics-based current–voltage model for organic solar cells using a combined analytical and regression approach. Applied Physics A: Materials Science and Processing, 129 (6). pp. 1-10. ISSN 0947-8396 E-ISSN 1432-0630

Islam, Maidul and Abdullah, Muhammad and Abdul Ghaffar, Alia Farhana and Ahmad, Salmiah (2023) Comparison analysis between PI and adaptive controllers for DC-DC converter of hybrid energy storage systems in electric vehicles. International Journal of Automotive and Mechanical Engineering, 20 (3). pp. 10659-10670. ISSN 2229-8649 E-ISSN 2180-1606

Islam, Md. Rafiqul and Rashid, Muhammad Mahbubur (2023) A survey on blockchain security and its impact analysis. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Ismail, Ahmad Abdul Mun'im and Rosdin, Muhammad Rafiq Haikal and Rozhan, Alya Naili and Purwanto, Hadi and Abdul Hamid, Abd. Malek and Md Din, Muhamad Faiz and Mohd Yasin, Mohd Fairus and Ani, Mohd. Hanafi (2023) Blast furnace slag cement clinker production using limestone-hot blast furnace slag mixture. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Ismail, Ahmad Faris and Anuar, Siti Zubaidah (2023) International, cultural and experiential learning. In: International Islamic University Malaysia at 40: Leading the Way. IIUM Press, Kuala Lumpur, pp. 171-183. ISBN 9789674913267

Ismail, Izham Izzat and Mohamad Jamil, Nur Arifah and Mohamad Anuar, Mai Nurul Fareesya and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2023) Investigation of hybrid rocket motor regression rate doped with high entropy metallic additives. In: AIAA SciTech Forum, 23rd - 27th January 2023, National Harbor, MD, USA & Online.

Ismam, Shafiul and Hossain, Delwar and Salam, Syed Munimus and Rashid, Muhammad Mahbubur (2023) Design and performance analysis of 28 GHz two-port MIMO rectangular microstrip patch antenna array for 5G applications. Asian Journal of Electrical and Electronic Engineering, 3 (2). pp. 33-44. E-ISSN 2785-8189

J

Jafri, Nur Huda Syazwani and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Ahmad Nor, Yusilawati and Amid, Azura (2023) Optimum yield of empty fruit bunches cellulose nanofibers by deep eutectic solvent and ultrasonication. Chemical Engineering and Technology, 47 (1). pp. 56-67. ISSN 0930-7516 E-ISSN 1521-4125

Jafri, Nur Huda Syazwani and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Ahmad Nor, Yusilawati and Amid, Azura (2023) Screening of deep eutectic solvent mixtures for treating empty fruit bunches to obtain cellulose nanofiber. Materials Today: Proceeding. E-ISSN 2214-7853

Jamadon, Nashrah Hani and Muhamad Rasid, Nurul Izzati and Ahmad, Mohd Azwan and Lutfi, Maisarah and Syed Abu Bakar, Syarifah Adzila and Jamal, Nur Ayuni and Muhamad, Norhamidi (2023) The effect of graphene addition on the microstructure and properties of graphene/copper composites for sustainable energy materials. In: 4th International Conference on Green Environmental Engineering and Technology (ICONGEET 2022), 17th - 18th November 2022, Seoul, South Korea.

Jamal, Fatin Nabilah and Dzulkarnain, Ahmad Aidil Arafat and Shahrudin, Fatin Amira and Jusoh, Masnira and Ahmad Basri, Nadzirah and Musa, Ramli and Sidek, Shahrul Naim and Md Yusof, Hazlina and Abd Hamid, Siti Rafiah (2023) Effectiveness of sound-working memory therapy for autism spectrum disorder (ASD) children using malay emotion regulation checklist (ERC-M). In: 2023 International Neuropsychological Society Taiwan Meeting (INS 2023 Taiwan Meeting), 06-08 July 2023, Taipei, Taiwan. (Unpublished)

Jamal, Fatin Nabilah and Dzulkarnain, Ahmad Aidil Arafat and Shahrudin, Fatin Amira and Rahmat, Sarah and Sidek, Shahrul Naim and Md Yusof, Hazlina and Abd Hamid, Siti Rafiah (2023) Evaluation of sound and working memory therapy using suppression otoacoustic emission (Suppression OAE) among autism spectrum disorder (ASD) children. In: 2023 International Neuropsychological Society Taiwan Meeting (INS 2023 Taiwan Meeting), 06-08 July 2023, Taipei, Taiwan. (Unpublished)

Jamaludin, Mohamad Iqmal and Gunawan, Teddy Surya and Karupiah, Rajandra Kumar and Zabidi, Suriza Ahmad and Kartiwi, Mira and Zakaria@Mohamad, Zamzuri (2023) Optimizing U-Net architecture with feed-forward neural networks for precise Cobb angle prediction in scoliosis diagnosis. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (3). pp. 883-895. ISSN 2089-3272

Jannah, Nurul and Abu Hanifah, Mohd Shahrin and Gunawan, Teddy Surya and Ahmad Zabidi, Suriza and Yusoff, Siti Hajar and Mohd Sapihie, Siti Nadiah (2023) Comparative analysis of MLP and CNN-LSTM models for solar power generation forecasting. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Jasni, Ainil Hawa and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi and Ali, Fathilah and Ahmad Nor, Yusilawati (2023) Naturally derived biomaterials: advances and opportunities. In: Engineered Biomaterials: Synthesis and Applications. Engineering Materials . Springer, Singapore, pp. 3-41. ISBN 978-981-99-6697-4

Jaswir, Irwandi and Sari, Dian Permata and Che Daud, Mohd Radzi and Sukmana, Raditya (2023) Motives for participation in halal food standard implementation: an empirical study in Malaysian halal food industry. International Journal of Islamic and Middle Eastern Finance and Management, 16 (5). pp. 928-954. ISSN 1753-8394

Jilte, Ravindra and Afzal, Asif and Ağbulut, Ümit and Shaik, Saboor and Khan, Sher Afghan and Linul, Emanoil and Asif, Mohammad (2023) Battery thermal management of a novel helical channeled cylindrical Li-ion battery with nanofluid and hybrid nanoparticle-enhanced phase change material. International Journal of Heat and Mass Transfer, 216 (124547). pp. 1-18. ISSN 0017-9310

Jimat, Dzun Noraini and Ahmad Nor, Yusilawati and Mohamad Puad, Noor Illi (2023) Review on sago thermoplastic starch composite films reinforced with nanocellulose. In: Nanocellulose-Reinforced Thermoplastic Starch Composites: Sustainable Materials for Packaging. Walter de Gruyter GmbH, Berlin/Boston, pp. 1-6.

Johari, Shazlina and Lim, Catherine Ee Chen and Taib, Bibi Nadia and Ismail, Mohd Hafiz and Ibrahim, Siti Noorjannah (2023) Simulation and analysis of piezoresistive microcantilever. International Journal of Nanoelectronics and Materials, 16 (Dec (Special Issue)). pp. 87-93. ISSN 1985-5761 E-ISSN 2232-1535

Juhar, M Z F and Mohamad, M Sofwan and Illias, Suhaimi and Amin, N A M and Hussain, S and Ani, Mohd Hanafi (2023) Maximum spreading diameter of a water droplet after impact on a hot surface beyond Leidenfrost temperature. In: 8th International Conference on Applications and Design in Mechanical Engineering (ICADME 2023), 4th - 5th September 2023, Kuala Lumpur, Malaysia.

Jusoh, Ahmad Zamani and Husain, Nur Fatihah and Abdul Malek, Norun and Mohd. Isa, Farah Nadia and Mohamad, Sarah Yasmin (2023) Design of miniaturized antenna for iot applications using metamaterial. IIUM Engineering Journal, 24 (1). pp. 122-137. ISSN 1511-788X E-ISSN 22897860

K

Kabbashi, Nassereldeen Ahmed and Ihsan, Sany Izan and Hassan Abdalla Hashim, Aisha (2023) Integration of knowledge at the Kulliyyah of Engineering. International Journal on Integration of Knowledge, 1 (1). pp. 40-51.

Kaderi, Akbar and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi and Illias, Suhaimi and Osman, M. S (2023) Metal dusting led failure in a high-temperature condenser. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, 17 November 2021, Virtual.

Kamarulariffin, Abdurrahman and Mohd Ibrahim, Azhar and Bahamid, Alala (2023) Improving deep reinforcement learning training convergence using fuzzy logic for autonomous mobile robot navigation. International Journal of Advanced Computer Science and Applications (IJACSA), 14 (11). pp. 935-942. ISSN 2158-107X E-ISSN 2156-5570

Kardile, Balasaheb Annasaheb and Pathan, Khizar Ahmed and Auti, Abhijeet Bhikashet and Khan, Sher Afghan (2023) Simulation of energy dissipation in BLDC Motor and analysis of speedacoustic characteristics. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 38-61. ISSN 2289-7895

Karthick, C. and Chatterjee, Dipankar and Gupta, Nidhish and Saxena, Prakhar and Sivagami, K. and Jeevanantham, A. K. and Kasianantham, Nanthagopal and Shaik, Saboor and Asif, Mohammad and Khan, Sher Afghan and Ağbulut, Ümit (2023) Environmental, combustion, and performance investigation of low viscous biofuel in port fuel injection spark‑ignition engine. Journal of Thermal Analysis and Calorimetry. pp. 1-22. ISSN 1588-2926 E-ISSN 1388-6150

Khadiza, Akter and Motakabber, S. M. A. and Alam, A. H. M. Zahirul and Yusoff, Siti Hajar (2023) Development of high-performance single inductor quadratic multilevel DC-DC step-up converter with MPPT controller. In: 2023 3rd International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST), 7-8 th January 2023, Dhaka, Bangladesh.

Khair, Nazmus Sakib and Abu Talip Yusof, Nurhafizah and Abdul Wahab, Yasmin and Bari, Bifta Sama and Ayob, Nur Idayu and Zolkapli, Maizatul (2023) Substrate-integrated waveguide (SIW) microwave sensor theory and model in characterising dielectric material: a review. Sensors International, 4. E-ISSN 2666-3511

Khalaf, Ayesheh Ahrari and Hassan Abdalla Hashim, Aisha and Olowolayemo, Akeem and Olanrewaju, Rashidah Funke (2023) Generative Interactive Psychotherapy Expert (GIPE) bot. International Journal of Computer Science and Network Security, 23 (4). pp. 15-24. ISSN 1738-7906

Khalifa, Othman Omran (2023) Employability skills: strategies for career advancement. Independently published. ISBN 979-8864186244

Khalifa, Othman Omran (2023) Fingerprint frontier: the evolution of biometric security. Independently published. ISBN 979-8868445064

Khalifa, Othman Omran (2023) Innovation and entrepreneurship skills for successful career advancement. Independently published. ISBN 979-8861569446

Khalifa, Othman Omran (2023) Problem-solving skills for a sustainable career: strategies for long-term success. Independently published. ISBN 979-8860407534

Khalifa, Othman Omran (2023) A guide for effective interpersonal skills for success. Independently published. ISBN 979-8862260397

Khalifa, Othman Omran (2023) A guide for mastering critical thinking skills. Independently published.

Khan, Huma and Khatoon, Shahida and Gaur, Prerna and Abbas, Mohamed and Saleel, Chanduveetil Ahamed and Khan, Sher Afghan (2023) Speed control of wheeled mobile robot by nature-inspired social spider algorithm-based PID controller. Processes, 11 (4). pp. 1-21. E-ISSN 2227-9717

Khan, Mohammad Amir and Faizabadi, Ahmed Rimaz and Rashid, Muhammad Mahbubur and Zaki, Hasan Firdous (2023) Performance evaluation of state-of-the-art 2D face recognition algorithms on real and synthetic masked face datasets. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (2). pp. 225-242. E-ISSN 2462-1943

Kharboot, Layla Haythoor and Fadil, Nor Akmal and Abu Bakar, Tuty Asma Abu Bakar and Mohd Najib, Abdillah Sani and Nordin, Norhuda Hidayah and Ghazali, Habibah (2023) A review of transition metal sulfides as counter electrodes for dye-sensitized and quantum dot-sensitized solar cells. Materials, 16 (7). pp. 1-27. ISSN 1996-1944

Kharuddin, Anis Athirah and Hasham, Rosnani and Ali, Fathilah and Adrus, Nadia and Jamaluddin, Jamarosliza and Abdul Rahman, Roshanida and Abdul Hamid, Mariani and Yaakob, Harisun (2023) Potential use of phytochemical extract as prebiotic compounds - a brief review. Journal of Materials in Life Sciences, 2 (1). pp. 82-87. E-ISSN 2976-3185

Komarudin, M. and Sophian, Ali and Septama, Hery Dian and Yulianti, Titin and Ikhsan, Muhamad and Zuhelmi, Tomy Pratama (2023) Ziswaf: zakat application to improve ease of recording zakat data in Indonesia. WSEAS Transactions on Environment and Development, 19. pp. 309-319. ISSN 1790-5079 E-ISSN 2224-3496

Krishnamoorthy, Ramalingam and Vellaiyan, Suresh and Venkatesan, Elumalai Perumal and Khan, Sher Afghan and Zakariya, Mahmoud and Saleel, Chanduveetil Ahamed (2023) Challenges and opportunities of Low Viscous Biofuel- a prospective review. ACS omega. pp. 1-16. ISSN 2470-1343

Kumar, K. Sunil and Kalos, Pritam Suryaprakash and Akhtar, Mohammad Nishat and Shaik, Saboor and Sundara, Vikram and Fayaz, H. and Khan, Sher Afghan and Asif, Mohammad (2023) Experimental and theoretical analysis of exhaust manifold by uncoated and coated ceramics (Al2O3, TiO2 and ZrO2). Case Studies in Thermal Engineering, 50. pp. 1-17. E-ISSN 2214-157X

Kurniawan, Syifa and Pebrianti, Dwi (2023) Optimization study of the ratio of bioethanol bioaceton ron 90 on the power and emissions of a 110cc gasoline motor. Asian Journal Science & Technology, 2 (1). pp. 22-30. ISSN 2963-6752

Kusuma, Prima Wijaya and Habaebi, Mohamed Hadi and Hakim, Galang P. N. and Muwardi, Rachmat and Islam, Md. Rafiqul (2023) Kalman filter for tracking a noisy cosinusoidal signal with constant amplitude. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia.

L

L Y, Qiu and Nik Azizan, N Z and Md. Kassim, Tahara Ramadzan (2023) Development of fragility curves for bridge. In: 1st International Conference on Manufacturing Engineering Technology, IConMET 2021, 14-15 July 2021, Virtual.

Lee, Pei May and Yang, Chuan Choong and Kwong, Wei Choong (2023) An exploratory study on students’ electricity consumption in RCE Gombak for sustainable communities. Malaysian Journal of Social Sciences and Humanities, 8 (3). pp. 1-12. E-ISSN 2504-8562

Luthfi, Abdullah Amru Indera and Abdul, Peer Mohamed and Md Jahim, Jamaliah and Engliman, Nurul Sakinah and Jamali, Nur Syakina and Tan, Jian Ping and Abdul Manaf, Shareena Fairuz and Sajab, Mohd Shaiful and Bukhari, Nurul Adela (2023) Isolation and characterization of biohydrogen-producing bacteria for biohydrogen fermentation using oil palm biomass-based carbon source. Applied Sciences, 13 (1). pp. 1-18. E-ISSN 2076-3417

M

M. Yusof, M. S. and Rafeeq, M. and Toha, Siti Fauziah (2023) Design and development of hovercraft amphibious robot locomotion for unmanned missions. Journal of Engineering and Technology, 14 (2). pp. 1-12. ISSN 2180-3811 E-ISSN 2289-814X

Mahfuz, M. M. Hasan and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Abdul Malek, Norun Farihah and Sami, Md Waliullah (2023) Design of a flexible textile antenna for early breast tumor detections. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia.

Mahmud, Md. and Rahman, Kazi Sajedur and Rokonuzzaman, Md. and Habib, A.K.M. Ahasan and Islam, Md Rafiqul and Motakabber, S. M. A. and Channumsin, Sittiporn and Chowdhury, Shahariar (2023) Lithium-ion battery thermal management for electric vehicles using phase change material: a review. Results in Engineering, 20. pp. 1-12. E-ISSN 2590-1230

Mahmud, Mudrikah Sofia and Aadnan, Aina Fadzleen and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2023) Cement-based with partial replacement of nano-silica for improvement in compressive strength. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Cetin, Safa and Efeoglu, Ihsan and Rahman, Md Mustafizur (2023) Wear and corrosion of ceramic coated metallic surface in presence of biodiesel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Mat Jusoh, Ahmad Haziq and Salehudin, Nabilah Farhana and Yee, Sen Tat and Din, Mohd Idrus and Adenan, Rashimah and Abdullah, Mohamad Akhir and Mat Zain, Mohd Hafizy and Lim, Sooi San and Chum, Pak Kuan and Ahmad Salman, Shafiq Wazzan and Yazid, Zurawati and Mat Isa, Mohd Azlan and Mohd Saleh, Mohd Khairul Annuar and Chua, Seok Cheng and Idris, Mohd Nazri and Karam Singh, Salvinder Singh and Lee, Hooi Lan and Tan, Chin Guan and Pang, See How (2023) Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD). Policy Paper. Department of Standard Malaysia (DSM), Malaysia.

Malik, Hafizi and Idris, Ahmad Syahrin and Toha @ Tohara, Siti Fauziah and Idris, Izyan Mohd and Daud, Muhammad Fauzi and Tokhi, Mohammad Osman (2023) Deploying patch-based segmentation pipeline for fibroblast cell images at varying magnifications. IEEE Access, 11. pp. 98171-98181. E-ISSN 2169-3536

Malik, Hafizi and Idris, Ahmad Syahrin and Toha @ Tohara, Siti Fauziah and Mohd Idris, Izyan and Daud, Muhammad Fauzi and Azmi, Nur Liyana (2023) A review of open-source image analysis tools for mammalian cell culture: algorithms, features and implementations. PeerJ Computer Science, 9. pp. 1-33. E-ISSN 2376-5992

Mamun, Abdullah Al and Nuruzzaman, M. and Salleh, M.N. (2023) Assessing reaeration rate equations for modelling dissolved oxygen of Pusu river in Malaysia. ASM Science Journal, 18. pp. 1-14. ISSN 1823-6782 E-ISSN 2682-8901

Manshor, Mohd Romainor and Alli, Yakubu Adekunle and Anuar, Hazleen and Ejeromedoghene, Onome and Omotola, Elizabeth Oyinkansola and Suhr, Jonghwan (2023) 4D printing: historical evolution, computational insights and emerging applications. Materials Science and Engineering: B, 295 (September 2023). pp. 1-11. ISSN 0921-5107 E-ISSN 1873-4944

Manshor, Mohd Romainor and Kamarulzaman, Amjad Fakhri and Anuar, Hazleen and Toha @ Tohara, Siti Fauziah and Ali, Fathilah and Sukindar, Nor Aiman and Suhr, Jonghwan and Haris, Nursyam Dzuha (2023) Optimizing tensile strength of PLA-Lignin Bio-composites using machine learning approaches. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Mansor, Mariatul Fadzillah and Adanan, Ahmad Iman Ikmal and Ahmad Tajuddin, Husna and Azmi, Azlin Suhaida (2023) Profiling anaerobic digestion stages from cafeteria food waste for production of biogas. In: International Conference on Chemical Engineering & Sustainability 2023 (ICCHES 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia (Hybrid).

Martoyoedo, Satryo and Priyadi, Priyadi and Fajrie, Dewanto and Ariati, Ratna and Yandri, Erkata and Hendroko Setyobudi, Roy and Suherman, Suherman and Burlakovs, Juris and Mel, Maizirwan and Krido Wahono, Satriyo and Heri Purnomo, Agus and Fauzi, Ahmad and Tonda, Rusli and Iswahyudi, Iswahyudi (2023) Incentive strategy for energy efficiency programs in industries consuming 6000 TOE/year with sustainable energy performance. In: 3rd International Conference on Natural Resources and Life Sciences, NRLS 2020, 23rd - 24th September 2020, Virtual, Online.

Mat Isa, Siti Suziliana Puteri and Parvin, Shanaz and M. Arifin, Norihan and M. Ali, Fazilah and Ahmad, Kartini (2023) Soret-Dufour effects on the waterbased hybrid nanofluid flow with nanoparticles of alumina and copper. Malaysian Journal of Mathematical Sciences, 17 (3). pp. 283-304. ISSN 1823-8343 E-ISSN 2289-750X

Mazlan, Mohd Rafiq and Jamadon, Nashrah Hani and Armin, Rajabi and Sulong, Abu Bakar and Mohamed, Intan Fadhlina and Yusof, Farazila and Jamal, Nur Ayuni (2023) Necking mechanism under various sintering process parameters – a review. Journal of Materials Research and Technology, 23. pp. 2189-2201. ISSN 2238-7854 E-ISSN 2238-7854

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd. Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Md Dahlal, Norazilawati and Amid, Azura (2023) Cultivating wellbeing: how halalan toyyiban principles benefit rice farmer? In: An Insight into Halal Business and Lifestyle. Revon Media Sdn Bhd, Petaling Jaya, Selangor, pp. 62-66. ISBN 978-629-97445-2-8

Md Kassim, Tahara Ramadzan and A. Majid, Taksiah (2023) Study on earthquake characteristics and method of assembling repeated earthquakes on the 2D seismic design RC frames. In: AWAM International Conference on Civil Engineering, AICCE 2022Penang, 15 - 17 February 2022, Penang.

Md Ralib @ Md Raghib, Aliza 'Aini and Mohamad Razali, Nur Fatin and Chatras, Matthieu and Nordin, Anis Nurashikin and Abdul Rahman, Farah Diyana and Pothier, Arnaud and Passerieux, Damien and Guines, Cyril (2023) Enhancement of quality factor in ST-cut quartz surface acoustic wave devices by using different numbers of IDTs and wavelengths for gas sensing. In: 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 22nd - 25th May 2023, Kuala Lumpur.

Md. Kassim, Tahara Ramadzan and A. Majid, Taksiah (2023) Sustainable seismic design consideration under repeated earthquakes. In: Cradle to Cradle of Environment through Technology; A Sustainability Perspective. LifeVision Resources, Seremban. NS, pp. 396-420.

Mohamad Jamil, Nur Arifah and Mohamaddiah, Ahmad Hadi and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2023) High entropy alloy as metal additive for hybrid rocket propellant. Materials Today: Proceedings, 75 (Part 1 (January 2023)). pp. 140-146. E-ISSN 2214-7853

Mohamad Puad, Noor Illi and Wan Zulkifli, Wan Majidah and M. Fathil, Nur Alia and Amid, Azura (2023) Response of auxins and cytokinins on Citrus suhuiensis adventitious shoot culture initiation and growth. Journal of Agrobiotechnology, 14 (1). pp. 21-31. E-ISSN 2180-1983

Mohamad Sabri, Nur Fatin Nabilah and Za'bah, Nor Farahidah and Md Ralib @ Md Raghib, Aliza 'Aini (2023) Investigation of a polymer-based SAW sensor to detect volatile organic compound (VOC). Asian Journal of Electrical and Electronic Engineering, 3 (2). pp. 10-17. E-ISSN 2785-8189

Mohamad Yunos, Muhammad Farhan Affendi and Nordin, Anis Nurashikin and Md Ralib @ Md Raghib, Aliza 'Aini and Samsudin, Zambri and Lim, Lai Ming (2023) Characterization and fabrication of piezoelectric energy harvesting ZnO nanorod on textile by hydrothermal method. In: IEEE International Conference on Sensors and Nanotechnology (SENNANO 2023), 26th - 27th September 2023, Putrajaya, Malaysia.

Mohamed Ali, Amina and Alam, Md Zahangir and Mohamed Abdoul-Llatif, Fatouma and Jami, Mohammed Saedi and Gamiye Bouh, Ibrahim and Adebayo Bello, Ibrahim and Ainane, Tarik (2023) Production of biogas from food waste using the anaerobic digestion process with biofilm-based pretreatment. Processes, 11 (3). pp. 1-21. E-ISSN 2227-9717

Mohamed Ali, Amina and Alam, Md Zahangir and Mohamed Abdoul‐Latif, Fatouma and Jami, Mohammed Saedi and Mohamed, Jalludin and Ainane, Tarik (2023) Hydrolysis of food waste with immobilized biofilm as a pretreatment method for the enhancement of biogas production. Sustainability, 15 (4). pp. 1-17. E-ISSN 2071-1050

Mohamed Ariff, Tasnim Firdaus and Sayadek, Mohd Shahril (2023) Wear analysis of titanium carbonitride in machining high strength steel (KRUPP 6582) using used palm oil as cutting fluid. In: 1st International Conference on Manufacturing Engineering Technology (IConMET 2021), Langkawi Island, Malaysia.

Mohamed Azmin, Nor Fadhillah and Mat Isa, Che Maznah and Lee, Wei-Koon and Ibrahim, Siti Noorjannah and Oh, Chai Lian (2023) Implementation of complex engineering problem solving (CEP) and complex engineering activities (CEA) in Malaysian engineering curriculum: a pilot study. In: International Conference on University Teaching and Learning (InCULT 2023), 18th - 19th October 2023, Shah Alam, Selangor, Malaysia.

Mohamed Gameil, Abeir Hussein and Yusof, Faridah and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi (2023) Modeling of E. coli growth, glucose consumption, and recombinant collagen like protein formation kinetics. In: International Conference on Chemical Engineering & Sustainability 2023 (ICCHES 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia.

Mohamed Noor, Noraini and Abdullah, Ezzat Chan and Othman, Raihan and Nasibab, Mubarak Mujawar (2023) Removal of cadmium ions via the magnetic biochar synthesised from sugarcane bagasse: factors affecting yield and adsorption capability. Journal of Sustainability Science and Management, 18 (1). pp. 70-85. ISSN 1823-8556 E-ISSN 2672-7226

Mohamed Rasied, Thaahirah Shireen and Mohd Ramli, Huda Adibah and Abdul Rahman, Farah Diyana and Najeeb, Athaur Rahman (2023) Adapting the conventional packet scheduling algorithms for simultaneous support of 5G multimedia traffic mix. In: 2023 International Conference on Fractional Differentiation and Its Applications (ICFDA), 14-16 March 2023, Sheikh Zayed Center For Conferences & Exhibition Ajman University, University St Ajman, United Arab Emirates.

Mohamed Yusof, Fauzi and Musiliu Folarin, Farayola (2023) Modeling the transmission dynamics of Hantavirus infection under the effect of vaccination and other optimal controls. Menemui Matematik, 45 (1). pp. 56-75. ISSN 2231-7023

Mohammad Tusar, Hachib and Uddin, Md Kamal and Mia, Shamim and Akter Suhi, Ayesha and Abdul Wahid, Samsuri and Kasim, Susilawati and Sairi, Nor Asrina and Alam, Md Zahangir and Anwar, Farooq (2023) Biochar-acid soil interactions—a review. Sustainability, 15 (18). pp. 1-16. E-ISSN 2071-1050

Mohammed Najm, Mustafa and Abdullah, Mohammed Najm and Almukhtar, Aya A. and Hamida, Belal Ahmed and Yasin, Moh and Harun, Sulaiman Wadi (2023) 8-HQCdCl2H2O as an organic Q-switcher in erbium laser cavity*. Optoelectronics Letters, 19 (11). pp. 681-685. ISSN 1673-1905 E-ISSN 1993-5013

Mohan, Raja and Ali, Fathilah (2023) The future of energy harvesting: a brief review of MXenes-based triboelectric nanogenerators. Polymers for Advanced Technologies, 34 (10). pp. 3193-3209. ISSN 1042-7147 E-ISSN 1099-1581 (In Press)

Mohd Ali, Mohd Aizat Iz’aan and Razali, Muhammad Farhan and Azami, Muhammad Hanafi and Abdul Hamid, Ahmad Hussein (2023) Investigation on nozzle throat erosion in hybrid rocket motor due to nozzle expansion ratio. Journal of Aerospace Society Malaysia, 1 (2). pp. 1-8. E-ISSN 3009-0520

Mohd Daud, Nurul Iman and Ahmad Tajuddin, Husna and Mansor, Mariatul Fadzillah and Nordin, Noor Faizul Hadry (2023) Life Cycle Analysis (LCA) of Halal authentication approaches on industrial food waste for gelatine production: a mini review. Halalsphere, 3 (2). pp. 52-58. E-ISSN 2773-6040

Mohd Hamzah, Siti Zainab and Abdul Malek, Norun Farihah and Ahamad, Firdaus Taqiyuddin and Mohamad, Sarah Yasmin and Jamaluddin, Mohd Haizal (2023) Reflection coefficient variation based on the configuration of integrated antenna and reflecting surface at 3.5 GHz. In: 2023 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION, 30 October - 2nd Novermber 2023, Berjaya Times Square Hotel, Kuala Lumpur.

Mohd Nasir, Najaa Fadhilah and Hasham, Rosnani and Sabtu, Rahimah and Ali, Fathilah and Adrus, Nadia and Jamaluddin, Jamarosliza and Abdul Rahman, Roshanida and Abdul Hamid, Mariani and Yaakob, Harisun (2023) Characterization and stability assessment of Ocimum gratissimum leaves extract loaded nanostructured lipid carrier. Environment Quality Management, 33 (3). pp. 361-369. ISSN 1088-1913 E-ISSN 1520-6483

Mohd Nawawi, Muhammad Muizz and Sidek, Khairul Azami and Azman, Amelia Wong (2023) ECG biometric in real-life settings: analysing different physiological conditions with wearable smart textiles shirts. Bulletin of Electrical Engineering and Informatics, 12 (5). pp. 2930-2938. ISSN 2089-3191 E-ISSN 2302-9285

Mohd Nordin, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi (2023) Effect of supercritical carbon dioxide pressure on foamed PolyLactic Acid biocomposite. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Mohd Paris, Iqbal Luqman and Habaebi, Mohamed Hadi and Zyoud, Alhareth Mohammed (2023) Implementation of SSL/TLS security with MQTT protocol in IoT environment. Wireless Personal Communications, 132 (1). pp. 163-182. ISSN 0929-6212 E-ISSN 1572-834X

Mohd Ramli, Huda Adibah and Hassan Abdalla Hashim, Aisha and Asnawi, Ani Liza (2023) Effective scheduling mechanism for a mixture of 5G multimedia use cases. Computers and Electrical Engineering, 108 (1). pp. 1-15. ISSN 0045-7906 E-ISSN 1879-0755

Mohd Razin, M. A. and Husman, M. A. and Toha, Siti Fauziah and Ibrahim, A. and Tokhi, M.O. (2023) An effective insoles shoes for blind people for mobility assistance. Journal of Engineering and Technology, 14 (2). pp. 1-13. ISSN 2180-3811 E-ISSN 2289-814X

Mohd Razin, Muhammad Aiman and Husman, Muhammad Afif and Toha, Siti Fauziah and Ibrahim, Aisyah (2023) Design of smart shoes for blind people. Journal of Integrated and Advanced Engineering (JIAE), 3 (1). pp. 79-86. ISSN 2774-602X E-ISSN 2774-6038

Mohd Romlay, Muhammad Rabani and Mohd Ibrahim, Azhar and Toha, Siti Fauziah and De Wilde, Philippe and Venkat, Ibrahim and Ahmad, Muhammad Syahmi (2023) Obstacle avoidance for a robotic navigation aid using Fuzzy Logic Controller-Optimal Reciprocal Collision Avoidance (FLC-ORCA). Neural Computing and Applications, 35 (30). pp. 22405-22429. ISSN 0941-0643 E-ISSN 1433-3058

Mohd Shatar, Nursyahirah and Mohd Sabri, Mohd Faizul and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi (2023) Energy, exergy, economic, environmental analysis for solar still using partially coated condensing cover with thermoelectric cover cooling. Journal of Cleaner Production, 387. pp. 1-11. ISSN 0959-6526 E-ISSN 1879-1786

Mohd Shatar, Nursyahirah and Mohd Sabri, Mohd Faizul and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi and Xie, Xitong and Weck, Arnaud (2023) Femtosecond laser induced porous surface on polymethyl methacrylate for filmwise condensation to improve solar still productivity. Desalination, 568. pp. 1-9. ISSN 0011-9164 E-ISSN 1873-4464

Mohd Sofri, Nur Syazwani Nadhirah and Mohamad Puad, Noor Illi and Sulaiman, Sarina and Ahmad Nor, Yusilawati and Hamzah, Fazlena (2023) A review: establishment and applications of starchy crops cell suspension cultures. In: International Conference on Chemical Engineering & Sustainability 2023 (ICCHES 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia (Hybrid).

Mohd Tahir, Mohamad Safiddin and Wahid, Azni Nabela and Mohamad Hanif, Noor Hazrin Hany and Janin, Zuriati (2023) Micro energy harvesting via piezoelectric and electromagnetic dynamics for higher power output. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Mohd Tombel, Nor Syahira and Mohd Zaki, Hasan Firdaus and Mohd Fadglullah, Hanna Farihin (2023) Feature extraction and supervised learning for volatile organic compounds gas recognition. IIUM Engineering Journal, 24 (2). pp. 407-420. ISSN 1511-788X E-ISSN 2289-7860

Mohd Yunus, Muhammad Sharir Fathullah and Yusoff, Siti Hajar and Mohd Sapihie, Siti Nadiah and Razali, Nur Syazana Izzati (2023) Smart meter based on IoT platform. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) Analysis and modeling of surface roughness in powder mix EDM and pure EDM using central composite design. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 243-254. ISSN 2462-1943

Mohd Zaki, Syazwani and Musa, Sharan (2023) Investigation of microgels and double crosslinked microgels containing 2-carboxyethyl acrylate (CEA). In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Motakabber, S. M. A. and Akter, Khadiza and Alam, A. H. M. Zahirul and Yusoff, Siti Hajar (2023) Design and evaluation of a high-performance extensible DC-DC converter integrated with ANN based MPPT controller. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Motakabber, S. M. A. and Hoque, Md. Mominul and Islam, Md. Rafiqul and Ihsan, Sany Izan and Islam, Gazi Zahirul and Zahirul Alam, A. H. M. (2023) MATLAB-based vibration signal processing for fault diagnosis. Asian Journal of Electrical and Electronic Engineering (AJoEEE), 3 (2). pp. 27-32. E-ISSN 2785-8189

Motakabber, S. M. A. and Rokon, M. I. R. and Alam, A. H. M. Zahirul and Matin, M. A, and Mahmud, Md (2023) Efficient dual mode arbitration scheme for multiprocessor hardware interface in System-on-Chip. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (4). pp. 1096-1109. ISSN 2089-3272

Motwake, Abdelwahed and Hassan Abdalla Hashim, Aisha and Obayya, Marwa and Eltahir, Majdy M. (2023) Enhancing land cover classification in remote sensing imagery using an optimal deep learning model. AIMS Mathematics, 9 (1). pp. 140-159. ISSN 2473-6988

Motwakel, Abdelwahed and Hassan Abdalla Hashim, Aisha and Alamro, Hayam and Alqahtani, Hamed and Alotaibi, Faiz Abdullah and Sayed, Ahmed (2023) Chaotic Mapping Lion Optimization Algorithm-Based Node Localization Approach for Wireless Sensor Networks. Sensors, 23 (21). pp. 1-15. ISSN 1424-8220

Motwakel, Abdelwahed and Hassan Abdalla Hashim, Aisha and Mengash, Hanan Abdullah and Alruwais, Nuha and Yafoz, Ayman and Alsini, Raed and Edris, Alaa (2023) Green anaconda optimization based energy aware clustering protocol for 6G wireless communication systems. Mobile Networks and Applications. pp. 1-14. ISSN 1383-469X E-ISSN 1572-8153

Mughees, Amna and Tahir, Mohammad and Sheikh, Muhammad Aman and Amphawan, Angela and Yap, Kian Meng and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2023) Energy Efficient joint user association and power allocation using Parameterized Deep DQN. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 15-16 August 2023, Kuala Lumpur, Malaysia.

Muhaisen, Naser Ahmad Naser and Habaebi, Mohamed Hadi and Suliman, F.M. and Khan, Sheroz and Elsheikh, Elfatih A. A. and Islam, Md. Rafiqul and Al Husaini, Mohammed Abdulla Salim (2023) Techno-economic feasibility analysis of Kuwait-specific photovoltaic-based street lighting system. Energy Exploration and Exploitation, 42 (2). pp. 626-647. ISSN 0144-5987 E-ISSN 2048-4054

Muhammad Ruhul Amin, Shourov and Husman, Muhammad Afif and Toha, Siti Fauziah and Jasni, Farahiyah (2023) Investigating optimal smartphone placement for identifying stairs movement using machine learning. International Journal of Engineering Materials and Manufacture, 8 (4). pp. 95-105. E-ISSN 0128-1852

Muhammad Yuhendri, Yoga Farhans and Nik Mohd, Nik Ahmad Ridhwan and Mat, Shabudin and Mohd Nasir, Mohd Nazri and Othman, Norazila and Mohd Rafie, Azmin Shakrine and Azami, Muhammad Hanafi (2023) Impact of cowl deflections on scramjet intake aerodynamics with shock-on-lip condition. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 461-468. ISSN 1990-7710

Muhammad Zamri, Fatin Najihah and Zulkurnain, Nurul Fariza and Gunawan, Teddy Surya and Kartiwi, Mira and Md Yusoff, Nelidya and Nur, Levy Olivia (2023) Real-time safety helmet detection using enhanced YOLOv5 object detection. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Muhumed, Sakarie Muse and Ibrahimy, Muhammad Ibn (2023) Noise reduction techniques in ECG signal. Asian Journal of Electrical and Electronic Engineering, 3 (1). pp. 27-33. E-ISSN 2785-8189

Mustafa, Aisyah Madihah and Abd Halim, Nor Farah Huda and Tomadi, Siti Haryani and Shahruddin, Najlah Sakinah and Nasaruddin, Ricca Rahman (2023) Analysis on tool wear during milling carbon fiber reinforced polymer in dry, coolant and chilled air condition. Jurnal Tribologi, 36 (March 2023). pp. 99-107. E-ISSN 2289-7232

Mustafa Hilal, Anwer and Hassan Abdalla Hashim, Aisha and G. Mohamed, Heba and A. Alharbi, Lubna and K. Nour, Mohamed and Mohamed, Abdullah and S. Almasoud, Ahmed and Motwakel, Abdelwahed (2023) Spotted hyena optimizer with deep learning driven cybersecurity for social networks. Computer Systems Science and Engineering, 45 (2). pp. 2033-2047. ISSN 0267-6192

Mustafa Hilal, Anwer and Hassan Abdalla Hashim, Aisha and G. Mohamed, Heba and K. Nour, Mohamed and M. Asiri, Mashael and M. Al-Sharafi, Ali and Othman, Mahmoud and Motwakel, Abdelwahed (2023) Malicious URL classification using artificial fish swarm optimization and deep learning. Computers, Materials & Continua, 74 (1). pp. 607-621. ISSN 1546-2218 E-ISSN 1546-2226

N

Nageib, Adilah Mohamed and Halim, Amanatuzzakiah Abdul and Nordin, Anis Nurashikin and Ali, Fathilah (2023) Recent applications of molecularly imprinted polymers (MIPs) on screen-printed electrodes for pesticide detection. Journal of Electrochemical Science and Technology, 14 (1). pp. 1-14. ISSN 2093-8551 E-ISSN 2288-9221

Nanda, Yasriza and Fiqraini, Rian and Alfianza, Kelvin and Maulani, Rijanti Rahaju and Mohamad Puad, Noor Illi and Abduh, Muhammad Yusuf (2023) Effects of pre-treatment with Aspergillus awamori and extraction methods on essential oil yield from spearmint leaves (Mentha spicata L.). Current Research on Biosciences and Biotechnology, 4 (2). pp. 262-268. E-ISSN 2686-1623

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hassan, Masjuki and Bello, Kamilu Adeyemi (2023) Hybrid coating of titanium alloys via liquid additive manufacturing method: a review of recent advances. In: 6th International Conference on Mechanical, Automotive and Aerospace Engineering 2023 (ICMAAE '23), Kuala Lumpur, Malaysia. (Unpublished)

Nashrom, Fatin Najihah Ruzani and Mohd Ramli, Huda Adibah and Saidin, Norazlina and Abdul Rahman, Farah Diyana (2023) Assistive shopping tool for the visually impaired. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), 15-16 August 2023, Kuala Lumpur, Malaysia.

Nasrudin, Raimi Fariz and Samat, Noorasikin and Engliman, Nurul Sakinah (2023) Characterization of poly(vinyl) alcohol based aerogel assisted by cellulose nanocrystal. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), IIUM Gombak.

Nik Abdul Ghani, Nik Rashida and Jami, Mohammed Saedi and Alam, Md Zahangir and Engliman, Nurul Sakinah (2023) Enhanced removal of multi-metal ion by graphene oxide polyethersulfone nanocomposite adsorptive membrane. In: IIUM Engineering Congress 2023 (IEC ’23), 15th - 16th August 2023, Hybrid Mode.

Nik Abdul Ghani, Nik Rashida and Jami, Mohammed Saedi and Alam, Md Zahangir and Mohd. Salleh, Hamzah (2023) Pilot scale analysis of phytochemical disinfection process for surface water treatment by moringa oleifera seeds. In: Cradle to Cradle of Environment through Technology; A Sustainability Perspective: Incorporating Technologies into Environment. LifeVision Resources, Seremban, Negeri Sembilan, pp. 210-235.

Nik Abdul Ghani, Nik Rashida and Jami, Mohammed Saedi and Alam, Md. Zahangir and Engliman, Nurul Sakinah (2023) Investigation of fouling mechanism on graphene oxide polyethersufone nanocomposite adsorptive membrane. Journal of Engineering Science and Technology, 18 (5). pp. 2672-2687. ISSN 1823-4690

Nik Abdul Ghani, Nik Rashida and Jami, Mohammed Saedi and Alam, Md. Zahangir and Engliman, Nurul Sakinah (2023) Investigation of fouling mechanism on graphene oxide polyethersufone nanocomposite adsorptive membrane. Journal of Engineering Science and Technology, 18 (5). pp. 2672-2687. ISSN 1823-4690

Nik Abdul Ghani, Nik Rashida and Jami, Mohammed Saedi and Isa, Mohamed Hasnain (2023) Enhanced performance of graphene-oxide polyethersulfone nanocomposite membrane wastewater and its fouling mechanism. In: 8th Brunei International Conference on Engineering and Technology 2021, 8th - 10th November 2021, Bandar Seri Begawan, Brunei Darussalam.

Nor Asmadi, Muhammad Adhwa Fathullah and Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Saidin, Norazlina (2023) Finite element simulation of single Zinc Oxide nanorod for piezoelectric nanogenerator. In: 14th IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2023), 28th - 30th August 2023, Langkawi, Malaysia.

Nor Hairin, Assayidatul Laila and Jailani, Muhammad Haziq Hakmal and Megat Hasnan, Megat Muhammad Ikhsan (2023) Thermoelectric properties of B-FeSi2 thermoelectric module utilizing cast-iron scrap chips. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Nor Hairin, Assayidatul Laila and Mohd Yusaini, Nurul Batrisyia and Othman, Raihan and Mohd Salled, Mohd Faiz (2023) Synthesis and characterization of intrinsic CuO-ZnO semiconductor for thermoelectric cell using electrodeposition method. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Nordin, Anis Nurashikin and Abd Manaf, Asrulnizam (2023) Design and fabrication technologies for microfluidic sensors. In: Microfluidic Biosensors. Elsevier, pp. 41-85. ISBN 978-0-12-823846-2

Nordin, N. M. and Anuar, Hazleen and Ali, Fathilah and Buys, Y. F. (2023) Properties of polylactic acid biocomposite foamed treated via supercritical carbon dioxide. In: Springer Proceedings in Materials. Springer Proceedings in Materials, 24 (1). Springer, Singapore, pp. 279-286. ISBN 978-981-99-2014-3

Norhamidi, Noralia Hazira and Abu Hanifah, Mohd Shahrin and Zulkurnain, Nurul Fariza and Ab. Rahim, Rosminazuin (2023) Development of monitoring system for mentor-mentee programme. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Nuge, Tamrin and Hayyan, Adeeb and Elgharbawy, Amal A.M. and Mohd. Salleh, Hamzah and Yap, Jun Yong and Kamarudin, Ainul Fitree and Hizaddin, Hanee Farzana and Hashim, Yumi Zuhanis Has-Yun and Liu, Xiaoling and Saleh, Jehad and Daoud, Jamal Ibrahim and Aljohani, Abdullah S. M. and Alhumaydhi, Fahad A. and Mohd Yusoff, Mohd Yakub @ Zulkifli (2023) Enhanced large-scale production of recombinant phytase in E. coli DH5 α: medium components optimization and thermodynamic studies. Journal of Molecular Liquids, 370. pp. 1-14. ISSN 0167-7322 E-ISSN 1873-3166

Nur Huda, Arif and Pebrianti, Dwi and Md Zain, Zainah (2023) Integrated robotic arm control: inverse kinematics, trajectory planning, and performance evaluation for automated welding. Asian Journal Science and Engineering, 2 (2). pp. 82-100. ISSN 2963-6752

O

Odiwo, Hammed and Kamilu Adeyemi, Bello and Malik, Abdulwahab and Abdulmumin Adetayo, Adebisi and Umma, Abdullahi and Mamuda, Dodo Rayyan and Maleque, Md. Abdul and Muhammad Uhuotu, Suleiman (2023) Study on the optimization of surface modification processing of SiCp and tribological properties of AA6061-SiCp based composites. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 1-12. E-ISSN 0128-1852

Othman, Ahmad Al Baqir and Ahmad, Salmiah and Badron, Khairayu and Altalmas, Tareq M. K. (2023) Identifying the correct articulation point of a Quranic letters of the throat (al-halqu) makhraj. PERINTIS eJournal, 13 (2). pp. 40-64. ISSN 2232-0725

Ounez, Kamel and Faris, Waleed Fekry (2023) الفقه والمقاصد والأخلاق: قراءة في التراث الإسلامي والحوار المعاصر = Fiqh, maqasid and ethics: a reading in Islamic heritage and contemporary dialogue. At-Tajdid, 27 (54). pp. 329-346. ISSN 1823-1926 E-ISSN 2600-9609

P

Paijan, Lailatul Harina and Maleque, Md. Abdul and Abu Bakar, Mohd Hadzley and Mamat, Mohd Fauzi and Osman, Mohd Hairizal and Rosli, Nor Ana and Asari, Mohd Rashidi (2023) Influence of microstructure on the hardness behavior of AISI duplex-2205 composite layer by TIG cladding. Malaysian Journal of Microscopy, 19 (1). pp. 118-128. ISSN 1823-7010 E-ISSN 2600-7444

Paijan, Lailatul Harina and Maleque, Md. Abdul and Adeyemi, Bello Kamilu and Mamat, Mohd Fauzi and Hussein, Nur Izan Syahriah (2023) Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. Jurnal Tribologi, 37. pp. 15-28. E-ISSN 2289-7232

Parveez, Bisma and Jamal, Nur Ayuni and Aabid, Md. Abdul and Baig, Alya Naili (2023) Microstructure and strengthening effect of coated diamond particles on the porous aluminum composites. Materials, 16 (8). pp. 1-12. ISSN 1996-1944

Parveez, Bisma and Jamal, Nur Ayuni and Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Aabid, Abdul and Baig, Muneer (2023) Improvement in effectiveness of diamond in strengthening the porous aluminium composite. Journal of Materials Research and Technology, 25. pp. 25-37. ISSN 2238-7854

Parveez, Bisma and Jamal, Nur Ayuni and Mohamed Saleem, Muhammad Raeez (2023) Effect of uncoated and coated diamond on the compressive properties of porous aluminium composites. Materialwissenschaft und Werkstofftechnik, 54 (9). pp. 1114-1121. ISSN 1521-4052 E-ISSN 0933-5137

Parveez, Bisma and Jamal, Nur Ayuni and Mohamed Saleem, Muhammad Raeez (2023) Investigation of morphology and compressive properties of diamond reinforced porous aluminium composites. Asian Journal of Fundamental and Applied Sciences, 4 (1). pp. 12-17. E-ISSN 2716-5957

Parveez, Bisma and Jamal, Nur Ayuni Jamal and Maleque, Md. Abdul and Rozhan, Alya Naili and Aabid, Abdul and Baig, Muneer (2023) Optimizing the compressive properties of porous aluminum composites by varying diamond content, space holder size and content. Materials, 16 (3). pp. 1-19. ISSN 1996-1944

Pebrianti, Dwi and Bayuaji, Luhur and Mahdiana, Deni and Md Yusof, Hazlina and Ahmad Zabidi, Suriza (2023) Problem based learning in aerospace engineering education: case study of MECH 4129 Engineering Lab IV (pre-liminary result). In: 6th International Conference on Engineering Professional Ethics and Education 2023 (ICEPEE'23), 15th - 16th August 2023, Virtual Conference.

Pebrianti, Dwi and Suhaimi, Muhammad Syafiq and Hossain, Md. Jobaher and Bayuaji, Luhur (2023) Exploring micro aerial vehicle mechanism and controller design using Webots simulation. Journal of Mechatronics and Intelligent Manufacturing (Mekatronika), 5 (2). pp. 41-49. E-ISSN 2637-0883

Polat, Muhammed Alperen and Gülten, Gökhan and Totik, Ya¸sar and Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Çetin, Safa and Efeoglu, Ihsan (2023) Synthesis and characterization of Ta/TaN coatings with CFUBMS-HiPIMS technology. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9—10 August, 2022, Kuala Lumpur, Malaysia.

Q

Quadros, Jaimon Dennis and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2023) Modeling and validation of base pressure for aerodynamic vehicles based on machine learning models. Computer Modeling in Engineering & Sciences, 137 (3). pp. 2331-2352. ISSN 1526-1492 E-ISSN 1526-1506

Quadros, Jaimon Dennis and Khan, Sher Afghan and T., Prashanth (2023) Experimental and numerical investigation of expansion corner effects on isolator performance. International Journal of Turbo & Jet Engines, Ahead of print. pp. 1-8. ISSN 0334-0082 E-ISSN 2191-0332

R

Rahim, Nur Aina Syuhada and Harun, Noor Hasmiza and Abdullah, Muhammad Rosli and Jamilan, Mohd Azerulazree and Kamarudin, Balqis and Abdul Wahab, Azimah and Ibrahim, Siti Noorjannah and Jimat, Dzun Noraini (2023) The optimization of self-assembled monolayer of thiols on screen-printed gold electrode. International Journal of Advances in Applied Sciences (IJAAS), 12 (4). pp. 405-412. ISSN 2252-8814 E-ISSN 2722-2594

Rahim, Razuana and Raja Ehsan Shah, Raja Shazrin Shah and Sulaiman, Sarina and Abd Rahman, Ramli (2023) Carbon dioxide emission reduction using combined cleaner production strategy and carbon emission pinch analysis in an offset printing plant. Chemical and Natural Resources Engineering Journal, 7 (1). pp. 100-111. E-ISSN 2637-0719

Rahman, M Azizur and Saleh, Tanveer and Jahan, Muhammad Pervej and McGarry, Conor and Chaudhari, Akshay and Huang, Rui and Tauhiduzzaman, M and Ahmed, Afzal and Mahmud, Abdullah Al and Bhuiyan, Md. Shahnewaz and Khan, Md Faysal and Alam, Md. Shafiul and Shakur, Md Shihab (2023) Review of intelligence for additive and subtractive manufacturing: current status and future prospects. Micromachines, 14 (3). pp. 1-53. E-ISSN 2072-666X

Rahman, Mohammed Ataur and Abubakar Hassan, Yusuf Abdi and Aung, Kyaw Myo and Ihsan, Sany Izan (2023) Nano-structured zinc oxide/silicon dioxide thermoelectric generator: a waste heat harvesting technology. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th -10th August 2022, Gombak, Selangor.

Rahman, Mohammed Ataur and Aung, Kyaw Myo and Ihsan, Sany Izan and Raja Ahsan Shah, Raja Mazuir and Al Qubeissi, Mansour and T. Aljarrah, Mohannad (2023) Solar energy dependent supercapacitor system with ANFIS controller for auxiliary load of electric vehicle. Energies, 16 (6). pp. 1-25. ISSN 1996-1073

Rahman, Mohammed Ataur and Ihsan, Sany Izan and Momoud, Ali (2023) Palladium/lathanum cobaltite catalyst polymer exchange membrane fuel cell for electric vehicle. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Rajan, Mohan Sundar and Weldcherkos, Tilahun and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Reddy, Chamakura Abhinav (2023) Integration of IOT and control systems for industry 4.0 applications. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Rakhimov, Abdumalik (2023) On the convergence of the Cesaro Mean of the Fourier-Laplace serieas. Journal of Computer Science & Computational Mathematics, 13 (2). pp. 47-49. E-ISSN 2231-8879

Rakhimov, Abdumalik (2023) Summabilty of the Fourier-Laplace series in the Nikol’skii spaces. In: 6th International Conference on Mathematical Applications in Engineering (ICMAE’22), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Ramachandran, Elumalai and Krishnaiah, Ravi and Perumal Venkatesan, Elumalai and Medapati, Sreenivasa Reddy and Sabarish, Rajagopalan and Khan, Sher Afghan and Asif, Mohammad and Linul, Emanoil (2023) Experimental studies to reduce usage of fossil fuels and improve green fuels by adopting hydrogen−ammonia−biodiesel as trinary fuel for RCCI engine. ACS omega, 9 (1). A-J. E-ISSN 2470-1343

Ramachandran, Elumalai and Krishnaiah, Ravi and Venkatesan, Elumalai Perumal and Parida, Satyajeet and Dwarshala, Siva Krishna Reddy and Khan, Sher Afghan and Asif, Mohammad and Linul, Emanoil (2023) Prediction of RCCI combustion fueled with CNG and algal biodiesel to sustain efficient diesel engines using machine learning techniques. Case Studies in Thermal Engineering (103630). pp. 1-38. E-ISSN 2214-157X

Rameli, Najihah and Abdul Halim, Amanatuzzakiah and Kushairi, Saeda Jannah and Che Lah, Nuur Fahanis (2023) Adsorption isotherm and kinetic analysis of molecularly imprinted polymer with two functional monomers for quantification of atrazine. International Journal of Environmental Analytical Chemistry. pp. 1-15. ISSN 0306-7319 E-ISSN 1029-0397

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Hasan, Muhammad Hasibul and Mokthar, Nur Syamimi (2023) Optimization of a reliable grid-connected PV-based power plant. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8th - 10th November 2021, Bandar Seri Begawan (Virtual).

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Sailan, Saeed (2023) Service robot using voice recognition. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei (Virtual).

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Syed Nasir, Sharifah Sai’dah (2023) An adaptive upper-limb stroke rehabilitation system. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 Nov 2021, Universiti Teknologi Brunei ( Virtual ).

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Ul Islam, Rafi (2023) Energy saving capability of variable inertia Magneto-Rheological (MR) flywheel. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei ( Virtual ).

Rashid, Muhammad Mahbubur and Syed Munimus, Salam and M Y, Ali and S, Yvette (2023) Flywheels in renewable energy systems: a review of recent developments and future directions. In: Proceedings of 5th International Conference on Sustainable Innovation in Engineering and Technology 2023, 16 August 2023, Kuala Lumpur, Malaysia.

Rashid, Nur Nadhirah Mohamad and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Nordin, Nur Azmah and Yahaya, Hafizal and Ismail, Mohammad Faizal and Harith, Ahmad and Wan Nawawi, Wan Mohd Fazli and Fauzan, Ahmad (2023) Passively Q-switched Erbium-Doped Fibre Laser Based on Graphene-Chitin Saturable Absorber. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (1). pp. 44-52. ISSN 24621943

Rashidan, Mohammad Ariff and Sidek, Shahrul Na'im and Md Yusof, Hazlina and Abd. Hamid, Siti Rafiah and Dzulkarnain, Ahmad Aidil Arafat and Ghazali, Aimi Shazwani and Mohamad Salah, Muhammad Faisal El-Muhammady and Abdul Alim Sidique, Faizanah (2023) Stimuli video quantification based on Valence-Arousal Elicitation in children with Autism Spectrum Disorder (ASD). IEEE access, 11. pp. 111142-111153. E-ISSN 2169-3536

Razali, Nur Syazana Izzati and Gunawan, Teddy Surya and Yusoff, Siti Hajar and Habaebi, Mohamed Hadi and Ibrahim, Saerahany Legori and Mohd Sapihie, Siti Nadiah (2023) Voltage instability and voltage regulating distribution transformer assessment under renewable energy penetration for low voltage distribution system. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (3). pp. 673-684. ISSN 2089-3272

Razali, Nur Syazana Izzati and Yusoff, Siti Hajar and Tumeran, Nor Liza and Mohd Yunus, Muhammad Sharir Fathullah (2023) Indoor light energy harvesting technique to energize a heat sensor using polycrystalline solar panel. Bulletin of Electrical Engineering and Informatics. 3238 -3246. ISSN 2302-9285

Razib, Mohd Asyraf and Saleh, Tanveer and Rana, Masud and Islam, Saiful and Muthalif, Asan G. A. (2023) Surface roughness modelling of the micromechanically patterned CNT forests. Micro and Nanosystems, 15 (3). pp. 189-198. ISSN 1876-4029 E-ISSN 1876-4037

Rodríguez-Galván, Lilia Carolina and Ayala-Garcia, Ivo Netali and Juárez, Eduardo Daniel and Abdul Malik, Noreha and Nordin, Anis Nurashikin and Rodamporn, Somphop (2023) What sentiments are generated in learning experiences with autonomous and multicultural engineering teams? In: IEEE Global Engineering Education Conference (EDUCON 2023), 1st - 4th May 2023, Kuwait.

Rosdin, Muhammad Rafiq Haikal and Ismail, Ahmad Abdul Mun'im and Abdul Hamid, Abd. Malek and Purwanto, Hadi and Illias, Suhaimi and Syed Abu Bakar, Syed Noh and Ani, Mohd. Hanafi (2023) Effect of oxygen gas exposure on T91 alloy at high temperature oxidation of steam reformer. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Roslan, Farah Sakiinah and Saidin, Norazlina and M. Thirunavakkarasu, Punithavathi and Ali Khan, Abdul and Yaacob, Mohd Hanif and Hasbullah, Nurul Fadzlin (2023) Low-temperature detection of acetone gas using ZnO-TiO2 nanorod on tapered multimode fiber decorated with Au-Pd thin films. Optical Fiber Technology. ISSN 10685200

Rosli, Anis Najwa and Yusoff, Siti Hajar and Mansor, Hasmah and Mohd Sapihie, Siti Nadiah and Muhamad Fahmi, Muhammad Aqil Muqri (2023) Using model predictive control in renewable energy sources. In: 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Rosli, Muhammad Izzat Amin and A. Raof, Natasha and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2023) Investigation of chip formation during turning of aluminum alloys 7075-T651 in dry and chilled air condition. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kulliyyah of Engineering, IIUM.

Rozeman, Salfarina and Adesta, Erry Yulian Triblas and Sophian, Ali and Tomadi, Siti Haryani (2023) Improvement activities in stamping die manufacturing: a systematic literature review. International Journal of Engineering Materials and Manufacture, 8 (2). pp. 21-35. E-ISSN 0128-1852

Ruslan, Ahmad Alhadi and Yusoff, Siti Hajar and Mohamad, Sarah Yasmin and Ibrahim, Siti Noorjannah and Abdul Malek, Norun Farihah and Abd Rahman, Faridah (2023) Performance comparison of a flexible circular microstrip patch antenna on various rubber-carbon compositions. In: 2023 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION, 30 October - 2nd Novermber 2023, Kuala Lumpur.

S

Saad, Ahmed Hassan and Nahazanan, Haslinda and Yusuf, Badronnisa and Toha, Siti Fauziah and Alnuaim, Ahmed and El-Mouchi, Ahmed and Elseknidy, Mohamed and Mohammed, Angham Ali (2023) A systematic review of machine learning techniques and applications in soil improvement using green materials. Sustainability, 15 (12). pp. 1-37. E-ISSN 2071-1050

Sabaruddin, Fatimah Atiyah and Chuan, Li Lee and Seng, Hua Lee and Ghani, Aizat and Samat, Noorasikin (2023) Flame retardancy evaluation of polymer composite-reinforced ceramic nanofillers. In: Synthetic and Natural Nanofillers in Polymer Composites: Properties and Applications. Woodhead Publishing Series in Composites Science and Engineering . Elsevier, UK, pp. 89-126. ISBN 978-0-443-19053-7

Sabri, Muhammad Ezamuddin Ezzad and Azami, Muhammad Hanafi and Abdullah, Nur Azam and Nordin, Norhuda Hidayah (2023) Investigation of regression rate end-burning typed hybrid rocket motor. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 485-494. ISSN 1990-7710

Sabri, Muhammad Ezamuddin Ezzad and K., Togashi and Azami, Muhammad Hanafi (2023) Numerical analysis of fuel regression rate in Hybrid Rocket Motor with star shape port fuel grain. Perintis e-Journal, 13 (2). pp. 9-18. ISSN 2232-0725 E-ISSN 2232-0725

Sabri, Muhammad Ezamuddin Ezzad and Roslan, Mohammad Amirul Qayyum and Azami, Muhammad Hanafi and Salleh, Zuraidah (2023) Regression rate end-burning hybrid rocket motor doped with high entropy metallic additives. In: AIAA SciTech Forum, 23rd - 27th January 2023, National Harbor, MD, USA & Online.

Saeed, Mamoon M. and Saeed, Rashid A. and Gaid, Abdulguddoos S. A. and Mokhtar, Rania A. and Khalifa, Othman Omran and Ahmed, Zeinab E. (2023) Attacks detection in 6G wireless networks using machine learning. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Saeed, Mamoon M. and Saeed, Rashid A. and Mokhtar, Rania A. and Khalifa, Othman Omran and Ahmed, Zeinab E. and Barakat, Mohammed and Elnaim, Areeg Ali (2023) Task reverse offloading with deep reinforcement learning in multi-access edge computing. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Saidin, Norazlina and Harith, Nur Farizah and Mohd. Ramli, Huda Adibah and Md Ralib @ Md Raghib, Aliza 'Aini and Abdul Malek, Norun Farihah (2023) Macro-bending effect of single-mode fiber for glucose sensor. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia.

Sakib, Md. Abu Tayab and Islam, Md. Rafiqul and Islam, Md. Shazzadul and Asadullah, G. M. and Bashri, Mohd Saiful Riza (2023) Design of quad element MIMO array with EBG structure for mutual coupling reduction. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 15-16 August 2023, Kuala Lumpur.

Saleem, Nasir and Gunawan, Teddy Surya and Kartiwi, Mira and Nugroho, Bambang Setia and Wijayanto, Inung (2023) NSE-CATNet: deep neural speech enhancement using convolutional attention transformer network. IEEE Access, 11. 66979- 66994. E-ISSN 2169-3536

Saleem, Nasir and Gunawan, Teddy Surya and Shafi, Muhammad and Bourouis, Sami and Trigui, Aymen (2023) Multi-attention bottleneck for gated convolutional encoder-decoder-based speech enhancement. IEEE Acces, 11. pp. 114172-114186. E-ISSN 2169-3536

Salleh, Mohd Syahmi and Yunus, Muhamad Fahmi and Ahmad, Azmir and Haris @ Harith, Muhammad Salahuddin and Kassim, Salina and Amir, Adibah and Udin, Hashim and Md Yusof, Muhammad Zakiyuddin and Hamid, Muhammad Zulhariz (2023) Integrated farming of stingless bee and pesticide-free chilli fertigation: sharing experience from knowledge transfer project (KTP-RIGS) with Persatuan Anak Kuantan Utara and Organic Farm Venture. Revelation and Science, 1 (Special Issue 1). pp. 71-79. ISSN 2229-9645 E-ISSN 2229-9947

Samat, Noorasikin and Shafiee, Muhd Izzudin and Syed Bakar, Sharifah Shahnaz (2023) Mechanical and morphological properties of cellulose-reinforced thermoplastic composites: effect of recycling. Journal of Engineering Science and Technology, 18 (1). pp. 70-82. ISSN 1823-4690

Sathish, T and Pelluru, Suresh and Sharma, Kamal and Saravanan, R. and Saleel, C Ahamed and Shaikh, Saboor and Khan, Sher Afghan and Panchal, Hitesh (2023) Zero emission /energy building heating through parabolic dish collector focused KNO3–NaNO3 and KNO3–NaNO3–NaNO2 PCM absorber: a case study. Case Studies in Thermal Engineering, 44 (102854). pp. 1-10. ISSN 2214-157X

Septiyana, Diah and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) Enhancing water sustainability index assessment through risk management, IoT, and artificial intelligence in water operation: a review. Water Conservation & Management, 7 (2). pp. 97-106. ISSN 2523-5664 E-ISSN 2523-5672

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) ANFIS domestic water consumption model before and during Covid19 pandemic in Tangerang Indonesia. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Triblas Adesta, Erry Yulian (2023) Enhancing sustainability index parameter using ANFIS computational intelligence model. IIUM Engineering Journal, 24 (2). pp. 258-268. ISSN 1511-788X E-ISSN 2289-7860

Serati, Flora and Mohd Zaki, Syazwani and Zulkifli, Ahmad Akid (2023) Strategies for improving photothermal conversion capabilities in hydrogel polymer materials for solar vapor generation. In: IIUM Engineering Congress 2023 (IEC ’23), 15 – 16 August 2023, IIUM.

Shabana, Ayesha and Bayar, Anitha Dayanand and Crasta, Asha and Khan, Sher Afghan and Baig, Maughal Ahmed Ali and Reddy, Voggu Kesava (2023) Evaluation of stability derivatives of an Ogive in a Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Buckling analysis of a thin-walled C-section channel under mechanical and thermal load. Journal of Advanced Research in Applied Mechanics, 109 (1). pp. 1-16. E-ISSN 2289-7895

Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Progresses and challenges of composite laminates in thin-walled structures: a systematic review. ACS Omega, 8 (34). pp. 30824-30837. E-ISSN 2470-1343

Shahruddin, Najlah Sakinah and Abd Halim, Nor Farah Huda and Mustafa, Aisyah Madihah and Tomadi, Siti Haryani and Mahad, Muhammad Akmal and Adesta, Erry Yulian Triblas (2023) Effect of feed rate on tool wear and surface condition during milling of CFRP. Jurnal Tribologi, 38. pp. 40-48. E-ISSN 2289-7232

Shahrudin, Fatin Amira and Dzulkarnain, Ahmad Aidil Arafat and Chahed, Norashikin and Ahmad Basri, Nadzirah and Jamal, Fatin Nabilah and Sidek, Shahrul Na'im and Md Yusof, Hazlina and Abd Hamid, Siti Rafiah (2023) Auditory sensory gating in auditory brainstem response (ABR) with psychological task in autism spectrum disorder (ASD) child: a case study. International Journal of Allied Health Sciences (IJAHS), 7 (5). pp. 512-527. E-ISSN 2600-8491

Shahrudin, Fatin Amira and Dzulkarnain, Ahmad Aidil Arafat and Jamal, Fatin Nabilah and Rahmat, Sarah and Musa, Ramli and Ahmad Basri, Nadzirah and Jusoh, Masnira and Sidek, Shahrul Naim and Md Yusof, Hazlina and Khalid, Madihah (2023) Evaluation of sound and working memory intervention in autism spectrum disorder (ASD) children using auditory brainstem response (ABR) with psychological task. In: 2023 International Neuropsychological Society Taiwan Meeting (INS 2023 Taiwan Meeting), 06-08 July 2023, Taipei, Taiwan. (Unpublished)

Shaik, Saboor and Vigneshwaran, Pethurajan and Roy, Abin and Kontoleon, Karolos J. and Mazzeo, Domenico and Cuce, Erdem and Saleel, C Ahamed and Alwetaishi, Mamdooh and Khan, Sher Afghan and Gürel, Ali Etem and Ağbulut, Ümit (2023) Experimental analysis on the impacts of soil deposition and bird droppings on the thermal performance of photovoltaic panels. Case Studies in Thermal Engineering, 48. pp. 1-11. ISSN 2214-157X

Shamhan, Muaadh and Idris, Ahmad Syahrin and Toha, Siti Fauziah and Daud, Muhammad Fauzi and Mohd Idris, Izyan and Malik, Hafizi (2023) An automated approach for fibroblast cell confluency characterisation and sample handling using AIoT for bio-research and bio-manufacturing. Cogent Engineering, 10 (1). pp. 1-17. E-ISSN 2331-1916

Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2023) Evaluation of derivative in damping in the Newtonian limit for non-planar wedge. Materials Today. pp. 1-3. ISSN 2214-7853

Shamitha, Shamitha and Crasta, Asha and Pathan, Khizar Ahmed and Khan, Sher Afghan (2023) Numerical simulation of surface pressure of a wedge at supersonic Mach numbers and application of design of experiments. Journal of Advanced Research in Applied Mechanics, 101 (1). pp. 1-18. E-ISSN 2289-7895

Shamsul Bahrin, Muhammad Ikmal Hakim and Norasram, Muhammad Izzaiman and Md Yusof, Hazlina and Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im (2023) Haptic glove for tactile graphics reader. Journal of Engineering and Technology, 14 (1). pp. 101-120. ISSN 2180-3811 E-ISSN 2289-814X

Sharmin, Afsah and Anwar, Farhat and Motakabber, S. M. A. and Hassan Abdalla Hashim, Aisha (2023) A trust aware secure ant colony optimization based routing algorithm for Internet of Things. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Sharuddin, Muhammad Hazman and Sulaiman, Mohd Hafis and Kamaruddin, Shafie and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda and Mohd Jamir, Mohd Ridzuan and Abdul-Rani, Ahmad Majdi (2023) Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (8). pp. 1647-1656. ISSN 1350-6501 E-ISSN 2041-305X

Sheikh, Abdul Manan and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Ahmad Zabidi, Suriza and Najeeb, Athaur Rahman and Basahel, Ahmed (2023) Machine Learning (ML) assisted Edge security framework on FPGAs. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 15-16 August 2023, Kuala Lumpur.

Sheikh, Javed S and Pathan, Khizar Ahmed and Kumar, Krishna and Khan, Sher Afghan (2023) Effectiveness of cone angle on surface pressure distribution along slant length of a cone at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104 (1). pp. 185-203. ISSN 2289-7879

Sugumaran, Luvindran and Mohd Zubir, Mohd Nashrul and Kazi, Salim Newaz and Tuan Zahari, Tuan Zaharinie and Mt Aznam, Suazlan and Mohd Halil, Aiman (2023) Experimental investigation of nucleate pool boiling heat transfer characteristics on modified copper surface via laser-structured microstructures. In: 6th International Conference on Clean Energy and Technology 2023, 7-8 June 2023, Bayview Hotel Penang, Malaysia. (Unpublished)

Suhaimi, Nur Hanis Sabrina and Ismail, Ahmad Fadzil and Ahmad, Yasser Asrul and Badron, Khairayu (2023) Estimating losses at 40-GHz downlink using non-meteorological techniques in heavy rain areas. TELKOMNIKA Telecommunication Computing Electronics and Control, 21 (4). pp. 711-717. ISSN 1693-6930 E-ISSN 2302-9293

Suhaimi, Nur Hanis Sabrina and Ismail, Ahmad Fadzil and Badron, Khairayu and Ahmad, Yasser Asrul (2023) Estimation of satellite link’s fade margin using non-meteorological technique and worst month analysis. International Journal of Electrical and Computer Engineering, 13 (4). pp. 4136-4144. ISSN 2088-8708 E-ISSN 2722-2578

Suid, Mohd Helmi and Ahmad, Mohd Ashraf and Ahmad, Salmiah and Ghazali, Mohd Riduwan and Tumari, Mohd Zaidi (2023) Optimal model order reduction based on Hybridization of Adaptive Safe Experimentation Dynamics-Nonlinear Sine Cosine Algorithm. In: 2023 International Conference on System Science and Engineering (ICSSE), 27-28 August 2023, Ho Chi Minh, Vietnam.

Sukindar, Nor Aiman (2023) Tech transfer boosts Sarawak’s handcraft businesses. Asia Research News (17 March 2023).

Sukorini, Henik and Widyastuti, Dyah Erni and Kurniawati, Dini and Suwannarat, Sawita and Mel, Maizirwan and Hendroko Setyobudi, Roy (2023) Biodiesel industrial waste based on Jatropha curcas as a fungicide to control Fusarium oxysporum and Alternaria solani. In: The 3rd International Conference on Natural Resources and Life Sciences (NRLS) 2020, 23rd - 24th September 2020, Surabaya (Virtual).

Sulaiman, Mohd Syahnizam and Thirunavakkarasu, Punithavathi and Auguste, Jean-Louis and Humbert, Georges and Roslan, Farah Sakiinah and Saidin, Norazlina (2023) Long period fiber grating for refractive index sensing. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (2). pp. 154-162. E-ISSN 2462-1943

Sumantra, I Ketut and Widnyana, I Ketut and Eka Martingsih, Ni Gusti Agung and Tamba, I Made and Adinurani, Praptiningsih Gamawati and Ekawati, Ida and Mel, Maizirwan and Soni, Peeyush (2023) Agronomic characters and quality of fruit of Salak cv. Gulapasir planted in various agro-ecosystems. Jordan Journal of Biological Sciences, 16 (2). 207 -221. ISSN 1995-6673 E-ISSN 2307-7166

Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Rosli, Adib Hamdani (2023) Influence of composite skin on the energy absorption characteristics of an aircraft fuselage. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 13-20. E-ISSN 0128-1852

Syed Mohamed Ali, Jaffar and M.Shaari, Muhammad Hafiz (2023) Numerical study on stability of oblique wing configuration. In: IIUM Engineering Congress, 15-16 August 2023, KOE ,IIUM.

Syed Mohd Azizi, Syed Muhammad Aslam and Mohd Razin, Muhammad Aiman and Toha, Siti Fauziah and Malik, Hafizi and Idris, Ahmad Syahrin (2023) Urban and long-range driving cycle for electric vehicle: a review. PERINTIS eJournal, 13 (1). pp. 47-68. ISSN 2232-0725

T

Tahreen, Amina and Adli, Sarah Amalina and Anuar, Hazleen and Jamaluddin, Jamarosliza and Mohan, Raja and Ali, Fathilah (2023) Algae materials for food and food packaging. In: Algae Materials: Applications Benefitting Health. Developments in Applied Microbiology and Biotechnology . Elsevier, United Kingdom, pp. 85-91. ISBN 978-0-443-18816-9

Tarique, Ausaf Hasan and Khalifa, Othman Omran and Islam, Md. Rafiqul and Kumar, Harish and Singh, A.K. (2023) Use of machine learning on satellite and drone images for agriculture application. In: 2023 International Conference on Electrical, Electronics, Communication and Computers (ELEXCOM), 26-27 August 2023, Roorkee, India.

Toha, Siti Fauziah and Nordin, Nor Hidayati Diyana and Md. Zain, Mohd Zarhamdy (2023) Particle swarm optimization approach in route navigation for PoSVI-Cane. Journal of Engineering and Technology, 13 (2). pp. 1-11. ISSN 2180-3811 E-ISSN 2289-814X

Tomadi, Siti Haryani and Abd Halim, Nor Farah Huda and H., Mas Ayu and R., Daud and Zakaria, Muhammad Ariff (2023) Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August, 2022, Kuala Lumpur.

Tumeran, Nor Liza and Yusoff, Siti Hajar and Gunawan, Teddy Surya and Abu Hanifah, Mohd Shahrin and Zabidi, Suriza Ahmad and Pranggono, Bernardi and Mohd Yunus, Muhammad Sharir Fathullah and Mohd Sapihie, Siti Nadiah and Halbouni, Asmaa Hani (2023) Model predictive control based energy management system literature assessment for RES integration. Energies, 16 (8). pp. 1-27. ISSN 1996-1073

Tun Ahmad Merahuddin, Tun Nurhanis and Khan, Ambareen and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2023) Control of base pressure at supersonic mach number in a suddenly expanded flow. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (1). pp. 210-225. ISSN 2289-7879

Turki, Al-Khalifa and Aabid, Abdul and Khan, Sher Afghan and Azami, Muhammad Hanafi and Baig, Muneer (2023) Response surface analysis of nozzle parameters at supersonic flow through microjets. Australian Journal of Mechanical Engineering, 21 (3). 1037 -1052. ISSN 1448-4846 E-ISSN 2204-2253

U

Uddin, Farhad and Tripura, Dilip Kumar and Salam, Syed Munimus and Rashid, Muhammad Mahbubur (2023) Performance analysis of different grid substations with demand-side-management-based optimal power usage. Asian Journal of Electrical and Electronic Engineering, 3 (2). pp. 1-9. E-ISSN 2785-8189

V

Venkatesan, Elumalai Perumal and Rajendran, Silambarasan and Murugan, Manickam and Medapati, Sreenivasa Reddy and Murthy, Keerty Venkata Sri Ramachandra and Alwetaishi, Mamdooh and Khan, Sher Afghan and Saleel, Chanduveetil Ahamed (2023) Performance and emission analysis of biodiesel blends in a low heat rejection engine with an antioxidant additive: an experimental study. ACS omega, 8 (40). pp. 36686-36699. E-ISSN 2470-1343

W

W. Aris, Wan Muhammad Syaamil and Abdul Rahim, Nadirah (2023) Operational cost analysis of an Earth Station System using parallel configuration. In: Proceedings of the 9th International Conference on Computer and Communication Engineering, ICCCE 2023, Kuala Lumpur, Malaysia.

Wan A Hamid, Wan Luqman Hakim and Iannucci, Lorenzo and Robinson, Paul (2023) Flexural behaviour of 3D-printed carbon fibre composites: experimental and virtual tests - application to composite adaptive structure. Composites Part C: Open Access, 10. pp. 1-11. E-ISSN 2666-6820

Warimani, Mahammadsalman and Chaudhary, Zakir Ilahi and Khan, Sher Afghan and Bellary, Sayed Ahmed Imran and Alam, Noor and Muthuswamy, Sonachalam (2023) Analytical evaluation of loss mechanism effects on PDE performance with variation of refilling beta parameters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 66-78. E-ISSN 2289-7879

Wattanasrirote, Whacharapate and Batcha, Mohd Faizal Mohideen and Palamanit, Arkom and Mel, Maizirwan and Wae-Hayee, Makatar (2023) Experimental and numerical investigations of Underground Coal Gasification (UCG) using half-teardrop shape cavity. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (2). pp. 172-183. ISSN 2289-7879

Widodo, Wahyu and Sutanto, Adi and Dwi Rahayu, Imbang and Devi Anggraini, Aprilliana and Handayani, Trisakti and Hendroko Setyobudi, Roy and Mel, Maizirwan and Ngoc Huu, Nguyen (2023) Herbs as a feed additive in the broilers for the sustainability of local products. In: The 3rd International Conference on Natural Resources and Life Sciences (NRLS) 2020, 23rd - 24th September 2020, Surabaya.

Y

Yakubu Adekunle, Alli and Peter Olusakin, Oladoye and Abdulmujeeb T., Onawole and Anuar, Hazleen and Sheriff, Adewuyi and Olutobi Daniel, Ogunbiyi and Karine, Philippot (2023) Photocatalysts for CO2 reduction and computational insights. Fuel, 344. pp. 1-18. ISSN 0016-2361 E-ISSN 1873-7153

Yamanaka, Kosei and Gunawan, Teddy Surya and Nordin, Anis Nurashikin and Ab Rahim, Rosminazuin and Mohd Zain, Zainiharyati and Nur, Levy Olivia (2023) Development of an iOS application leveraging PalmSens MethodSCRIPT for rapid COVID-19 detection. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Yap, Suk Wy and Johari, Norhasnidawani and Mazlan, Saiful Amri and Syed Ahmad, Syarifah Nur Aqida and Arifin, Rizal and Hassan, Noor Azlina and Johari, Mohd Aidy Faizal (2023) Superhydrophobic zinc oxide/epoxy coating prepared by a one-step approach for corrosion protection of carbon steel. Journal of Materials Research and Technology, 25. pp. 5751-5766. ISSN 2238-7854 E-ISSN 2214-0697

Yusof, Siti Najihah and Mohamed Azmin, Nor Fadhillah and Abd Wahab, Mohd Firdaus and Asnawi, Ani Liza (2023) A bibliometric analysis of clitoria ternatea. Chemical and Natural Resources Engineering Journal, 7 (2). pp. 66-77. E-ISSN 2637-0719

Z

Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2023) Study on the lateral torsional buckling of composite thin-walled beam. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET 2021), 8th - 10th November 2021, Bandar Seri Begawan, Brunei Darussalam (Virtual).

Zainal Abidin, Siti Aisyah and Yusoff, Siti Hajar and Mansor, Hasmah and Mohd Sapihie, Siti Nadiah and Muhamad Fahmi, Muhammad Aqil Muqri (2023) Scheduling of the battery for peak shaving using Model Predictive Control (MPC). In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Zainal Abidin, Sumaiya and Osazuwa, Osarieme Uyi and Othman, Nur Hidayati and Setiabudi, Herma Dina and Sulaiman, Sarina (2023) Recent progress on catalyst development in biomass tar steam reforming: toluene as a biomass tar model compound. Biomass Conversion and Biorefinery. pp. 1-36. ISSN 2190-6815 E-ISSN 2190-6823 (In Press)

Zainuddin, Ahmad Anwar and Mohd Nor, Rizal and Amir Hussin, Amir 'Aatieff and Mohd Sazali, Muhammad Nurzikry (2023) MQTT-enabled smart door access system: design and implementation using NodeMCU ESP 8266 and HiveMQ. In: 9th International Conference on Computing, Engineering and Design (ICCED 2023), 7th - 8th November 2023, Kuala Lumpur, Malaysia.

Zakaria, Nur Z.I. and Gunny, Ahmad Anas Nagoor and Dzahir, Mohd I.H.M and Ahmad, Abdul Aziz and Ismail, Ku S.K and Mahmod, Safa Senan and Javed, Muhammad and Yazdi, Namdar B and Saifuddin, Md. N.A.A (2023) Utilization of seaweed (Gracilaria sp.) liquid as cost- effective macronutrients and micronutrients for bioethanol production. Chemical Engineering Transactions, 106. pp. 1357-1362. ISSN 2283-9216

Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil and Mohd Azmi, Mohd Syahriman (2023) Mathematical model development of evacuated glass-thermal absorber tube Collector (EGATC) for air heating application. Journal of Science And Mathematics Letters, 11 (1). pp. 73-82. ISSN 2462-2052 E-ISSN 2600-8718

Zali, Muhamad Naim and Mohd Ibrahim, Azhar and Venkat, Ibrahim and Omar, Saiful and Belaton, Bahari (2023) Crowd management: simulation modelling and visualization via fuzzy agents. In: 8th Brunei International Conference on Engineering and Technology 2021, 8th - 10th November 2021, Brunei Darussalam.

Zamani, Abu Sarwar and Hassan Abdalla Hashim, Aisha and Akhtar, Md. Mobin and Samdani, Faizan and Siddiqui, Ahmad Talha and Alluhayb, Adel and Hamza, Manar Ahmed and Ahmad, Naved (2023) The prediction of sleep quality using wearable-assisted smart health monitoring systems based on statistical data. Journal of King Saud University - Science, 35 (9). pp. 1-9. ISSN 10183647

Zohary, Aideal Czar and Asrar, Waqar and Aldheeb, Mohammed (2023) A successful microblowing strategy for airfoils. Progress in Computational Fluid Dynamics, 23 (3). pp. 131-145. ISSN 1468-4349 E-ISSN 1741-5233

Zulhairee, Munirah and Mohd Zain, Rozainanee and Che Mohamad Nor, Adibah and Jafar, Nur Fadhilah and Md Noh, Mohd Fairulnizal and Ahmad Noorden, Mohd Shihabuddin and Nordin, Anis Nurashikin and Ab Rahim, Rosminazuin and Gunawan, Teddy Surya and Chin, Lim Ying and Mohd, Yusairie and Azman, Nur Asyiqin and Mohd Zain, Zainiharyati (2023) Clinical performance of reverse transcription loop mediated isothermal amplification COVID-19 assay on gold- nanoparticle-modified screen-printed Carbon Electrode using differential pulse voltammetry. Sensors and Materials, 35 (10). pp. 4731-4750. ISSN 0914-4935 E-ISSN 2435-0869

Zulkifli, Ahmad Akid and Sa’adon, Muhammad Hazwan and Serati, Flora and Mohd Zaki, Syazwani (2023) Development of PVA-Chitosan/PANi hydrogels for environmental applications. In: 3rd International Conference on Universal Wellbeing (ICUW) 2022, Online Conference.

Zulkifly, Zahir and Yusoff, Siti Hajar and Tumeran, Nor Liza and Razali, Nur Syazana Izzati (2023) Battery energy storage system (BESS) modeling for microgrid. IIUM Engineering Journal, 24 (1). pp. 57-74. ISSN 1511-788X E-ISSN 2289-7860

Zulkurnain, Nurul Fariza and Ahmad, Yasser Asrul and Mohd Nazri, Najla Athirah (2023) Web-based safety eyewear detection system in workplace using machine learning. In: Proceedings of the 9th International Conference on Computer and Communication Engineering, ICCCE 2023, Kuala Lumpur, Malaysia.

zaki, Zakarya A Mohamed and Hassan Abdalla Hashim, Aisha (2023) Enhanced machine learning model for prediction of COVID-19 cases in Iraq. International Journal of Science and Research (IJSR), 12 (6). pp. 2249-2260. ISSN 2319-7064