Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics > TL500 Aeronautics"

A

Aabid, Abdul and Hrairi, Meftah and Jaffar Syed, Mohamed Ali and Sebaey, Tamer Ali (2022) A review on reductions in the stress-intensity factor of cracked plates using bonded composite patches. Materials, 15 (9). pp. 1-20. ISSN 1996-1944

Aabid, Abdul and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2020) Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. In: 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020, 6th-7th March 2020, Hyderabad, India..

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Ibrahim, Yasser E. (2023) Review of piezoelectric actuator applications in damaged structures: challenges and opportunities. ACS Omega, 8 (3). pp. 2844-2860. ISSN 2470-1343

Aabid, Abdul and Ibrahim, Yasser and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2023) Optimization of structural damage repair with single and double-sided composite patches through the finite element analysis and Taguchi method. Materials, 16 (4). pp. 1-14. ISSN 1996-1944

Aabid, Abdul and Khan, Ambareen and Mazlan, Nur Musfira and Ismail, Mohd Azmi and Akhtar, M. Nishat and Khan, Sher Afghan (2019) Numerical simulation of suddenly expanded flow at Mach 2.2. International journal of Engineering & Advanced Technology (IJEAT), 8 (3). pp. 457-462. ISSN 2249-8958

Aabid, Abdul and Khan, Sher Afghan (2021) Studies on flows development in a suddenly expanded circular duct at supersonic mach numbers. International Journal of Heat and Technology, 39 (1). pp. 185-194. ISSN 0392-8764

Aabid, Abdul and Mohd Zakuanl, Muhammad Amir Mirza and Khan, Sher Afghan and Ibrahim, Yasser E. (2021) Structural analysis of three-dimensional wings using finite element method. Aerospace Systems, 4 (3). pp. 1-22. ISSN 2523-3947 E-ISSN 2523-3955

Aabid, Abdul and Perveez, Bisma and Perveen, Nagma and Khan, Sher Afghan and Raheman, Md Abdul and Zayan, Jalal Mohammed and Shabbir, Omer (2022) Reviews on design and development of unmanned aerial vehicle (drone) for different applications. Journal of Mechanical Engineering Research and Developments, 45 (2). pp. 53-69. ISSN 1024-1752

Aabid, Abdul and Perveez, Bisma and Perveen, Nagma and Khan, Sher Afghan and Shabbir, Omar (2022) A case study of unmanned aerial vehicle (drone) technology and its applications in the COVID-19 pandemic. Journal of Mechanical Engineering Research and Developments, 45 (2). pp. 70-77. ISSN 1024-1752

Abd Halim, Abdul Kareem and Syed Mohamed Ali, Jaffar and Sulaeman, Erwin (2020) The effect of fuel weight distribution on the aeroelastic instability of swept wings. International Journal of Vehicle Structures & Systems, xx (xx). p. 1. ISSN 0975-3060 E-ISSN 0975-3540 (In Press)

Abdelrahman, Mohammad and Hassanein, Atef (2011) Aerodynamics of airfoil sections and their influence on wind turbine design and performance. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE’11), 17-19 May 2011, Kuala Lumpur, Malaysia.

Abdelrahman, Mohammad and Hassanein, Atef (2011) New airfoil families for horizontal-axis wind turbines. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE’11), 17-19 May 2011, 17-19 May 2011, Kuala Lumpur, Malaysia.

Abdelrahman, Mohammad and Hassanein, Atef (2012) New low speed airfoil families oriented towards horizontal-axis wind turbines applications. LAMBERT Academic Publishing, Germany. ISBN 978-3848438808

Abdul Halim, Abdul Karim and Syed Mohamed Ali, Jaffar and Erwin, Sulaeman (2019) Prediction of buckling mode for simply supported stiffened thin plates subject to inplane loading. In: 11th International Conference On Numerical Analysis In Engineering Conference In Numerical Analysis In Engineering (NAE) 2019, 20th-22 August 2019, Bangi, Selangor. (Unpublished)

Abdulla, Mohammed and Hrairi, Meftah and Aabid, Abdul and Abdullah, Nur Azam (2025) Effect of temperature and adhesive defect on repaired structure using composite patch. Frattura ed Integrita Strutturale, 19 (71). pp. 124-150. E-ISSN 1971-8993

Abdullah, Nur Azam (2023) Aerofracturelastic: a study on the Interaction of crack and aeroelastic instability of aircraft and lifting surfaces. In: 4th ITB International Graduate School Conference (IGSC), 6 July 2023, Institut Teknologi Bandung, Indonesia. (Unpublished)

Abdullah, Nur Azam (2024) BRICS membership enables Malaysia to progress with advanced tech. New Straits Times, 21 June 2024.

Abdullah, Nur Azam (2024) Kajian pergolakan udara ekstrem dalam pesawat perlu berterusan. Berita Harian, MukaSepuluh (26hb Mei 2024). p. 10.

Abdullah, Nur Azam (2024) Penyertaan BRICS pacu sektor aeroangkasa, AI. Berita Harian, 24 June 2024. p. 11.

Abdullah, Nur Azam and Akbar, Mahesa and Wirawan, Nanda and Curiel-Sosa, Jose Luis (2019) Structural integrity assessment on cracked composites interaction with aeroelastic constraint by means of XFEM. Composite Structures. ISSN 0263-8223

Abdullah, Nur Azam and Curiel-Sosa, J.L. and Taylor, Zeike A. and Tafazzolimoghaddam, Behrooz and Vicente, J.L Martinez (2017) Modelling of transversal crack and delamination under traction with XFEM. In: 3rd International Conference on Mechanics of Composites (MechComp 2017), 4th-7th July 2017, Bologna, Italy. (Unpublished)

Abdullah, Nur Azam and Curiel-Sosa, J.L. and Wirawan, Nanda and Akbar, Mahesa (2018) Structural integrity assessment of cracked composite plate under aeroelastic loading by means of XFEM. In: 6th International Conference Integrity-Reliability-Failure, 22-26 Jul 2018, Lisbon, Portugal.

Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Akbar, Mahesa (2017) Flutter assessment on composite plate with crack by means of fully coupled Finite Element and Doublet Lattice Method. In: 3rd International Conference on Mechanics of Composites (MechComp 2017), 4th-7th July 2017, Bologna, Italy. (Unpublished)

Abdullah, Nur Azam and Mohamed Afandi, Mohamed Azizul (2021) Selami sains aerodinamik dalam sukan berbasikal. Berita Harian, 16 February 2021. p. 11.

Abdullah, Nur Azam and Sulaeman, Erwin (2014) Aeroelastic flutter analysis of supersonic wing with multiple external stores. IIUM Engineering Journal, 15 (2). pp. 1-11. ISSN 1511-788X

Abdullah, Nur Azam and Sulaeman, Erwin (2014) Aeroelastic tailoring of oscillating supersonic wing with external stores. Applied Mechanics and Materials, 464. pp. 110-115. ISSN 1660-9336

Abdullah, Nur Azam and Sulaeman, Erwin (2013) Flutter analysis of supersonic wing with external stores. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2nd- 4th July 2013, Berjaya Time Square Hotel, Kuala Lumpur. (Unpublished)

Abdullah, Nur Azam and Wirawan, Nanda and Curiel-Sosa, J.L. and Akbar, Mahesa (2018) Aerofracturelastic on wing box of multi-purpose commuter aircraft under gust lby means of XFEM. In: 6th International Conference Integrity-Reliability-Failure, 22-26 Jul 2018, Lisbon, Portugal.

Abdusslam, Saleh N. and Ong, Jiunn Chit and Hamdan, Megat M. and Omar, Ashraf Ali and Asrar, Waqar (2006) Application of Gas-Kinetic BGK Scheme for Solving 2-D Compressible Inviscid Flow around Linear Turbine Cascade. International Journal for Computational Methods in Engineering Science and Mechanics, 7 (6). pp. 403-410. ISSN 1550-2287

Abedin, Jaber and Akmeliawati, Rini (2015) Design and development of modular autonomous flying vehicle. International Journal of Robotics and Mechatronics, 2 (2). pp. 77-86. ISSN 2288-5889

Abuzaid, Ahmed and Hrairi, Meftah and Kabrein, Hashim (2020) Stress analysis of plate with opposite semicircular notches and adhesively bonded piezoelectric actuators. In: 45th International Conference on Vibroengineering, 7th May 2020, Dublin, Ireland.

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Modeling approach to evaluating reduction in stress intensity factor in center-cracked plate with piezoelectric actuator patches. Journal of Intelligent Material Systems and Structures, 28 (10). pp. 1334-1345. ISSN 1045-389X E-ISSN 1530-8138

Afiq Safwan, Ahmad Afandi and Jaffar Syed, Mohamed Ali (2021) Educational software for stress analysis of idealized multi-spar aircraft wing. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 Jun 2021, Virtual. (Unpublished)

Afzal, Asif and Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Abdul Rahim, Shebeer (2016) Structural analysis of vee-cap sheet metal component. IOSR journal of Mechanical and Civil Engineering ( IOSR-JMCE), 18 (6). pp. 79-83. ISSN 2320-334x E-ISSN 2278-1684

Ahmad, Che Mahzan (2014) From Noise to Bruit in Organization Communication: Roaming with French Knowledge/Theory. Middle East Journal of Scientific Research, 19 (9). pp. 1226-1234. ISSN 1990-9233 E-ISSN 1999-8147

Ahmed, Khizar Pathan and Dabeer, P.S. and Khan, Sher Afghan (2016) CFD analysis of the supersonic nozzle flow with sudden expansion. IOSR journal of Mechanical & Civil Engineering ( IOSR-JMCE ), 18 (6). pp. 5-7. ISSN 2320-334x E-ISSN 2278-1684

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2021) Thermal resistance and pressure drop minimization for a micro-gap heat sink with internal micro-fins by parametric optimization of operating conditions. CFD Letters, 13 (12). pp. 100-112. ISSN 2180-1363

Ahmed Ali Baig, Maughal and Al-Mufadi, Farhad and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2011) Control of base flows with micro jets. International Journal of Turbo & Jet-Engines, 28 (1). pp. 59-69. ISSN 0334-0082 E-ISSN 2191-0332

Ahmed Siddiqui, Naseeb and Asrar, Waqar and Sulaeman, Erwin (2017) Literature review : Biomimetic and conventional aircraft wing tips. International Journal of Aviation, Aeronautics, and Aerospace, 4 (2). pp. 1-25. E-ISSN 2374-6793

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Effects of micro jets on the flow field of the duct with sudden expansion. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 636-640. E-ISSN 2277-3075

Al-Khalifah, Turki and Aabid, Abdul and Khan, Sher Afghan (2020) Regression analysis of flow parameters at high Mach numbers. Solid State Technology, 63 (6). pp. 5473-5488. ISSN 0038-111X

Al-Robaian, Abdul Rehman A and Khan, Sher Afghan and Asad Ullah, Mohammed and G. M., Fharrukh Ahmed and Imtiyaz, A (2018) A new approach to low-cost open-typed subsonic compressible flow wind tunnel for academic purpose. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6). pp. 383-394. ISSN 2249-6890 E-ISSN 2249-8001

AlDahoul, Nouar and Htike, Zaw Zaw and Akmeliawati, Rini (2017) Hierarchical extreme learning machine based reinforcement learning for goal localization. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Alam, Jubayer Abdullah Rafiul and Abu Talib, Abd Rahim and Altarazi, Yazan Sofyan Mohammed and Yusaf, Talal and Azami, Muhammad Hanafi and Nik Mohd, Nik Ahmad Ridhwan (2023) Experimental investigation on gas turbine engine performance using alternative fuel. Journal of Aeronautics, Astronautics and Aviation,, 55 (3S). pp. 479-483. ISSN 1990-7710

Ali Baig, Maughal Ahmed and Khan, Sher Afghan and C., Ahmed Saleel and Rathakrishnan, Ethirajan (2012) Control of base flows with micro jet for area ratio of 6.25. ARPN Journal of Engineering and Applied Sciences, 7 (8). pp. 992-1102. ISSN 1819-6608

Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Effect of temperature and moisture dependent material properties on the bending behavior of laminated cylindrical shell under hygrothermal loads. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July 2016, Kuala Lumpur, Malaysia.

Altaf, Afaq and Omar, Ashraf Ali E. and Asrar, Waqar (2010) Experimental investigation of the vortical flow around a reverse delta wing using PIV. In: Experimental Fluid Mechanics 2010, 24-26 November 2010, Liberec / Czech Republic.

Altaf, Afaq and Omar, Ashraf Ali E. and Asrar, Waqar (2011) Study of the reverse delta wing. Journal of Aircraft, 48 (1). pp. 277-286. ISSN 0021-8669

Altaf, Afaq and Omar, Ashraf Ali E. and Asrar, Waqar and Ludin@Jamaluddin, Hani (2011) Investigation of the vortical flow around a reverse delta wing. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011 (ICMAAE11) , 17-19 May 2011, Legend Hotel, Kuala Lumpur .

Altaf, Afaq and Tan, Boon Thong and Omar, Ashraf Ali and Asrar, Waqar (2016) Impact of a reverse delta type add-on device on the flap-tip vortex of a wing. International Journal of Aviation, Aeronautics, and Aerospace, 3 (3). pp. 1-28. E-ISSN 2374-6793

Altaf, Afaq and Thong, Tan Boon and Omar, Ashraf Ali and Asrar, Waqar (2017) Experimental investigation of the influence of a reverse delta type add-on device on the flap-tip vortex of a wing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Aminanda, Yulfian and Abu Hasan , Hamidah (2011) Experimental study of the strength of sandwich structure with honeycomb core. In: Advances in aircraft structure. IIUM Press, Kuala Lumpur, pp. 101-106. ISBN 978-967-418-148-2

Aminanda, Yulfian and Esa, Mir Amirul Shah and Said Mohamed, Said Hamadi (2011) Design of IIUM aircraft fuselage using composite material. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 1-7. ISBN 978-967-418-148-2

Andan, Amelda Dianne and Asrar, Waqar and Omar, Ashraf Ali (2011) Estimation of aerodynamic parameters of IIUM hybrid airship. In: International Conference on Mechanical, Automotive and Aerospace Engineering , 17-19 May, 2011, Kuala Lumpur.

Andan, Amelda Dianne and Asrar, Waqar and Omar, Ashraf Ali (2012) Investigation of aerodynamic parameters of a hybrid airship. Journal of Aircraft, 49 (2). pp. 658-661. ISSN 0021-8669

Andan, Amelda Dianne and Lee, Duck-Joo (2019) Discrete tonal noise of NACA0015 airfoil at low reynolds number. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 129-145. ISSN 2289-7879

Andan, Amelda Dianne and Lee, Duck-Joo (2018) Effect of external acoustic excitation on NACA0015 discrete tonal noise. Applied Acoustics, 141. pp. 374-381. E-ISSN 0003-682X

Anuar, Farhana Nur Danisyah Mohd Anuar and Ghasi Mahaboobali, Fharukh Ahmed and Khan, Ambareen and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2024) Effect of cavity geometry and location on base pressure in a suddenly expanded flow at mach 2.0 for area ratio 3.24. Journal of Advanced Research in Applied Mechanics, 117 (1). pp. 1-21. E-ISSN 2289-7895

Ashfaq, Syed and Khan, Sher Afghan (2014) Effect of mach number on wall pressure flow field for area ratio 2.56. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (2). pp. 56-64. ISSN 2320-334X E-ISSN 2278-1684

Ashfaq, Syed and Khan, Sher Afghan (2014) Experimental investigation of flow through convergent nozzle and the influence of micro jets on the enlarged duct flow field. IPASJ International Journal of Mechanical Engineering (IIJME ), 2 (3). pp. 7-14. ISSN 2321-6441

Ashfaq, Syed and Khan, Sher Afghan (2014) Studies on wall pressure flow control by micro jets for high area ratio. International Journal of Advanced Scientific and Technical Research, 4 (1). pp. 664-672. ISSN 2249-9954

Ashfaq, Syed and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2014) Control of base pressure with micro jets for area ratio 2.4. International Review of Mechanical Engineering, 8 (1). pp. 1-10. ISSN 1970-8734 E-ISSN 1970-8742

Asrar, Waqar and Aldheeb, Mohammad and Zohary, Aideal Czar (2021) Numerical investigation on the pressure drag of some low-speed airfoils for UAV application. CFD Letters, 13 (2). pp. 29-48. ISSN 2180-1363

Asrar, Waqar and Altaf, Afaq and Omar, Ashraf Ali and Hrairi, Meftah and Thong , Boon Tan (2015) Aerodynamic performance of a naca 23012 half wing model with a reverse delta wing type add-on device. In: 8th Ankara International Aerospace Conference, 10-12 Sep 2015, Ankara, Turkey.

Ayesha, Shabana and Crasta, Asha and Ridwan, R and Khan, Sher Afghan (2022) Computation of damping derivative of an Ogive at highspeed flow. Journal of Mechanical Engineering Research and Developments, 45 (2). pp. 151-165. ISSN 1024-1752

Azami, Muhammad Hanafi (2019) Investigation of three-shaft high-bypass-ratio engine performance and emission prediction using alternative fuels. Project Report. UNSPECIFIED. (Unpublished)

Azami, Muhammad Hanafi and Faheem, Mohammed and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Experimental research of wall pressure distribution and effect of micro jet at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3). pp. 1000-1003. E-ISSN 2277-3878

Azami, Muhammad Hanafi and Faheem, Mohammed and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Inspection of supersonic flows in a CD nozzle using experimental method. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3). pp. 996-999. ISSN 2277-3878

Azami, Muhammad Hanafi and Savill, Mark (2016) Comparative analysis of alternative fuels in detonation combustion. In: 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 25th-27th July 2016, Salt Lake City, Utah, US.

Azami, Muhammad Hanafi and Savill, Mark (2017) Comparative study of alternative biofuels on aircraft engine performance. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231 (8). pp. 1509-1521. ISSN 0954-4100 E-ISSN 2041-3025

Azami, Muhammad Hanafi and Savill, Mark (2019) Performance and emission trade-off assessment for aero-gas turbine engine. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 270-276. ISSN 2277-3878

Azami, Muhammad Hanafi and Savill, Mark (2017) Pulse detonation assessment for alternative fuels. Energies, 10 (3). pp. 369-1. E-ISSN 1996-1073

Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang (2017) Comparison of aircraft engine performance and emission analysis using alternative fuels. International Journal of Sustainable Aviation, 3 (1). pp. 43-63. ISSN 2050-0467 E-ISSN 2050-0475

B

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Khan, Mohammad Yunus (2012) Effect of area ratio on base pressure in a suddenly expanded duct for under expanded flow ft mach 1.87. International Journal of Mechanical and Industrial Engineering, 2 (2). pp. 86-90. ISSN 2231-6477

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Control of nozzle flow in a suddenly expanded duct with micro jets. International Journal of Engineeing Science and Advance Technology (IJESAT), 2 (4). pp. 789-795. ISSN 2250-3676

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Effect of mach number in a suddenly expanded flow for area ratio 4.84. International Journal of Engineering Research and Application, 2 (4). pp. 593-599. ISSN 2248-9622

Baig, Maughal Ahmed Al and Khan, Sher Afghan and Rathakrishnan, E. (2012) Base pressure studies from over expanded nozzle for area ratio 2.56. International Journal of Current Research and Review, 4 (11). pp. 107-112. ISSN 2231-2196 E-ISSN 0975-5241

Bashir, Musavir and Khan, Sher Afghan and Rajendran, Parvathy (2015) Combined effect of nozzle pressure ratio and screech prone supersonic mach number in a suddenly expanded flow. In: International Conference on Mechanical Engineering And Advanced Material (ICME-AM) 2015, 3rd-4th Dec. 2015, Kota Kinabalu, Sabah.

Bin Zulkafli, Mohd Fadhli and Omar, Ashraf Ali E. and Asrar, Waqar (2012) Numerical analysis of FDV method for one-dimensional Euler equations. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE2012), 3 - 5 July 2012, Seri Pacific Hotel Kuala Lumpur, Malaysia.

Boughou, Smail and Omar, Ashraf Ali and Elsayed, Omer Ali and Mohammed Aldheeb, Mohammed Abdulmalek (2023) Numerical investigation on the aerodynamics of high-lift and bird-like low Reynolds number airfoils. Progress in Computational Fluid Dynamics, 23 (3). pp. 146-162. ISSN 1468-4349 E-ISSN 1741-5233

C

Chaudhary, Zakir Ilahi and Shinde, V.B and Ashfaq, Syed and Khan, Sher Afghan (2015) Effect of level of expansion and inertia level in a suddenly expanded flow. In: International Conference on Mechanical Engineering & Advanced Material (ICME-AM2015), 3rd-4th Dec. 2015, Kota Kinabalu, Sabah.

Chaudhary, Zakir Ilahi and Shinde, V.B and Bashir, Musavir and Khan, Sher Afghan (2016) Experimental studies of the base flow from the nozzles with sudden expansion with micro jets. International Journal of Energy, Environment, and Economics, 24 (1). pp. 59-66. ISSN 1054-853X

Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Bashir, Musavir and Khan, Sher Afghan (2015) Experimental investigation of the base flow from the nozzles with sudden expansion. International Journal of Applied Engineering Research (IJAER), 10 (92-spc). pp. 208-211. ISSN 0973-4562 E-ISSN 0973-9769

Chaudhary, Zakir Ilahi and Vilas B., Shinde and Khan, Sher Afghan (2015) Effectiveness of micro-jets at different level of expansion. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE, 12 (4). pp. 29-34. ISSN 2278-3008 (O), 2319-7676 (P)

Chit, O.J. and Omar, Ashraf Ali and Asrar, Waqar and Zaludin, Z. A. (2005) Hypersonic flow simulation by the gas-kinetic bhatnagar-gross-krook scheme. AIAA JOURNAL, 43 (7). pp. 1427-1433. ISSN 0001-1452

Crasta, Asha and Khan, Sher Afghan (2015) Effect of aspect ratio with angle of attack of an oscillating hypersonic delta wing with straight leading edges. Mathematical Sciences International Research Journal, 4 (2). pp. 28-33. ISSN 2278-8697

Crasta, Asha and Khan, Sher Afghan (2016) Effect of aspect ratio with roll moment derivative of a delta wing in supersonic flow. International Journal of Advances in Engineering Research (IJAER), 12 (1). pp. 10-15. ISSN 2454-1796 E-ISSN 2231-5152

Crasta, Asha and Khan, Sher Afghan (2014) Effect of mach number on stiffness and damping derivatives for oscillating hyersonic non-planar wedge. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (2vVIII). pp. 4-11. ISSN 2320-334X E-ISSN 2278-1684

Crasta, Asha and Khan, Sher Afghan (2014) Supersonic similitude for oscillating non-planar wedge. IOSR Journal of Mathematics (IOSR-JM), 10 (2vVI). pp. 15-24. ISSN 2319-7676 E-ISSN 2278-3008

D

Delvi, Hamza Afser and Ridwan, R and Muneer, Rayid and Faheem, Mohammed and Khan, Sher Afghan (2021) Influence of microjets on flow development at supersonic mach numbers with sudden expansion. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020), 10th-11th December 2020, Hyderabad, India.

E

Elfaghi, Abdulhafid M. and Asrar, Waqar and Omar, Ashraf Ali (2010) Higher order compact-flowfield dependent variation (HOC-FDV) solution of one-dimensional problems. Engineering Applications of Computational Fluid Mechanics , 4 (3). pp. 434-440. ISSN 1994-2060

Elfaghi, Abdulhafid M. and Asrar, Waqar and Omar, Ashraf Ali E. (2010) Higher order compact-flowfield dependent variation (HOCFDV) method for solving navier-stokes equations. In: The 8th Asian Computational Fluid Dynamics Conference, 10-14 January, 2010, Hong Kong.

Elfaghi, Abdulhafid M. and Asrar, Waqar and Omar, Ashraf Ali E. (2010) A high order compact-flowfield dependent variation (HOC-FDV)method for inviscid flows. International Journal for Computational Methods in Engineering Science and Mechanics, 11 (5). pp. 258-263. ISSN 1550-2295 (O), 1550-2287 (P)

Elfagi, Abdulhafid M. and Ahmed Omer, Elhassen Ali and Asrar, Waqar and Omar, Ashraf Ali (2011) Highly accurate compact flowfield dependent variation method for solving two-dimensional navier-stokes equations. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011, 17-19 May, 2011, Kuala Lumpur.

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf Ali (2009) Evaluation of aircraft wing-tip vortex using PIV. In: The 10th Asian International Conference on Fluid Machinery (AICFM), 21-23 October 2009, Kuala Lumpur, Malaysia. (Unpublished)

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf Ali (2010) Span load modification via differential spoiler setting. In: 2010 RAeS Aerodynamics Conference Applied Aerodynamics: Capabilities and Future Requirements, 27-28 July 2010, Bristol, UK.

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf Ali and Kwon, Kijung (2012) Evolution of NACA23012 wake vortices structure using PIV. Journal of Aerospace Engineering , 25 (1). pp. 10-20. ISSN 1943-5525 (O), 0893-1321 (P),

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf Ali and Kwon, Kijung (2010) Influence of differential spoiler settings on the wake the vortex characterization and alleviation. Journal of Aircraft, 47 (5). pp. 1728-1738. ISSN 0021-8669

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf Ali and Kwon, Kijung (2010) Influence of differential spoiler settings on the wake vortex characterization and alleviation. Journal of Aircraft, 47 (5). pp. 1728-1738. ISSN 0021-8669

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf Ali and Kwon, Kijung and Jung, Hyejin (2009) Experimental investigation of wing tip vortex. In: 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition 2009, 5-8 January 2009, Orlando, Florida.

Elsayed, Omer Ali and Kwon, Kijung and Asrar, Waqar and Omar, Ashraf Ali E. (2010) Induced rolling moment for NACA4412 plain and flapped wing. International Journal of Aircraft Engineering and Aerospace Technology, 82 (1). pp. 23-32. ISSN 0002-2667

Elsayed, Omer Ali and Omar, Ashraf Ali E. and Asrar, Waqar and Kwon, Kijung (2011) Effect of differential spoiler settings (DSS) on the wake vortices of a wing at high-lift-configuration (HLC). Aerospace Science and Technology, 15 (7). pp. 555-566. ISSN 1270-9638

F

Fadhil, Muhammad and Prayoga, Aditya and Eriawan, Andi and Sulaeman, Erwin and Legowo, Ari (2021) Aerodynamic pressure mapping technique from CFD to FEM model of N219 winglet. CFD Letters, 13 (12). pp. 90-99. ISSN 2180-1363

Fadhli, Mohammad and Omar, Ashraf Ali and Asrar, Waqar (2015) Flowfield-dependent variation method for moving-boundary problems. AIAA Journal, 53 (4). pp. 1026-1036. ISSN 1533-385X (O), 0001-1452 (P) E-ISSN 1533-385X

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Mohd Azan Mohammed (2021) Experimental investigation of the effect of cross wire on the flow field of elliptic jet. International Journal of Heat and Fluid Flow, 90 (108834). pp. 1-12. ISSN 0142-727X

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Mohd Azan Mohammed (2021) Experimental study of midplane jet evolution in multiple jets at Mach 2.0. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020, 22-23 December 2020, Nitte, India.

Faheem, Mohammed and Ridwan, R and Rayid, Muneer and Delvi, Hamza Afser and Khan, Sher Afghan (2021) Impact of expansion level on flowfield with sudden expansion at supersonic regimes. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, 22 - 23 December 2020, Nitte, India.

Fürst, Jiri and Islam, Mazharul and Příhoda, J. and Wood, David (2015) Towards pressure gradient sensitive transitional k-kl-omega model: The natural transition for low-re airfoils. In: Topical Problems of Fluid Mechanics 2015, 11th-13th February 2015, Prague, Czech Republic.

G

G M, Fharukh Ahmed and Al-Robaian, Abdul Rehman A and Aabid, Abdul and Khan, Sher Afghan (2018) Numerical analysis of convergent-divergent nozzle using finite element method. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6). pp. 373-382. ISSN 2249-6890 E-ISSN 2249-8001

Ghosh, K and Murthy, M and Khan, Sher Afghan and Pandey, P K (1990) Pitch and roll derivatives of a delta wing with curved leading edge in high speed flow. Aeronautical Society of India, 42 (4). pp. 299-302. ISSN 0972-950X

H

Hamizi, Ilya Bashiera and Khan, Sher Afghan (2019) Aerodynamics investigation of delta wing at low Reynold’s number. CFD letters, 11 (2). pp. 32-41. ISSN 2180-1363

Haris, Mohd Yusoff/M.Y. and Laila, Dayang/D and Zainudin , Edisyam/E.S and Mustapha, Faizal/F and Zahari, Rizal/R and Halim, Zahurin/Z (2011) Preliminary Review of Biocomposites Materials for Aircraft Radome Application. Key Engineering Materials, 471-72. pp. 563-568. ISSN 1013-9826

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar (2024) Numerical prediction of trailing edge noise at low Reynolds number with modified trailing edges of a NACA 0015 airfoil. CFD Letters, 16 (8). pp. 64-94. ISSN 2180-1363 E-ISSN 2180-1363

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar and Aldheeb, Mohammed and Saad, Mohd Rashdan (2023) Experimental Investigation of Low Reynolds Number Flow Around a Serrated NACA 0015 Airfoil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2). pp. 137-160. ISSN 2289-7879

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar and Mohammed Sapardi, Mohd Azan (2023) Large Eddy simulation of low Reynolds number flow around a NACA0015 airfoil with modified trailing edges. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 57-79. ISSN 2289-7895

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar and Sulaeman, Erwin (2021) Laminar separation bubble and flow topology of NACA 0015 at low reynolds number. CFD Letters, 13 (10). pp. 36-51. ISSN 2180-1363

Hassan, Mohamed Ibren and Asrar, Waqar and Ismail, Muhammad Ariffuddin and Andan, Amelda Dianne (2024) Experimental investigation on the aerodynamic parameters of trailing edge wake generators. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (1). pp. 1-16. ISSN 2289-7879

Hossain, Altab and Rahman, Mohammed Ataur and Hossen, Jakir and Iqbal, Parvez and M.I., Zahirul (2011) Prediction of aerodynamic characteristics of an aircraft model with and without winglet using fuzzy logic technique. Aerospace Science and Technology, 15 (8). pp. 595-605. ISSN 1270-9638

Hossain, Altab and Rahman, Mohammed Ataur and Rahman, Md. Mozasser and Hasan, SK. and Hossen, Md. Jakir (2009) Prediction of power generation of small scale vertical axis wind turbine using fuzzy logic. Journal of Urban and Emvironmental Engineering, 3 (2). pp. 43-51. ISSN 1982-3932

I

Ibren, Mohamed and Sulaeman, Erwin and Legowo, Ari and Abdullah, Nur Azam (2019) Roll control reversal of variable swept wing in supersonic flow. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 288-291. ISSN 2249-8958 E-ISSN 2277-3878

Idres, Moumen and Mustapha, O and Okasha, Mohamed Elsayed Aly Abd Elaziz (2017) Quadrotor trajectory tracking using PID cascade control. In: AEROS Conference 2017, 12 December 2017, Putrajaya, Malaysia.

Idres, Moumen Mohammed Mahmoud (2024) Assessment of the range of an electric aircraft. Journal of Advanced Research in Applied Sciences and Engineering Technology, 50 (2). pp. 155-170. E-ISSN 2462-1943

Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Sulaeman, Erwin and Fatai, Sado and Legowo, Ari (2019) Performance evaluation of linear quadratic regulator and linear quadratic Gaussian controllers on quadrotor platform. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 191-195. ISSN 2277-3878 E-ISSN 2249-8958

Islam, Mazharul and Langfeldt, Felix and Fürst, Jiri and Wood, David H. (2017) CFD analysis of a SD 7003 airfoil with a local correlation based transition and turbulence model. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Islam, Mazharul and Langfeldt, Felix and Fürst, Jiri and Wood, David H. (2016) CFD analysis of a SD 7003 airfoil with a local correlation based transition and turbulence model. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE 16), 2nd-4th July 2013, Kuala Lumpur. (Unpublished)

Islam, Mazharul and Langfeldt, Felix and Juretic, Franjo and Guerrero, Joel and Wood, David (2015) CFD analysis of NACA4415 airfoil with γ−Reθ model considering natural transition. In: North American Wind Energy Academy (NAWEA) 2015 Symposium, 9th-11th June 2015, Virginia, USA.

Ismail, Izham Izzat and Mohd Yusof, Muhammad Fadzrulizwan and Azami, Muhammad Hanafi and Mohd Ihsan, Ahmad Ariffin (2020) Thermophysical behaviour of biofuel under detonation combustion. Journal of Aeronautics, Astronautics and Aviation, 52 (1). pp. 63-82. ISSN 1990-7710

Ismail, Nurhuda and Mohamed Ali, Jaafar Syed (2011) Educational software for stress analysis of thin-walled sections 1 : Isotropic material. In: The International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2011), 17-19 May 2011, Kuala Lumpur.

Ismaila B., Tijani and Akmeliawati, Rini and Legowo, Ari and Tun Muzamil, L. A. (2012) A matlab-based low-cost autopilot for autonomous helicopter development. In: ICIUS 2012, 21 October 2012, Singapore. (Unpublished)

J

Jaimon, Dennis Quadros and Prashanth, T. and Khan, Sher Afghan (2022) Base drag estimation in suddenly expanded supersonic flows using backpropagation genetic and recurrent neural networks. Journal of Aerospace Engineering, 236 (3). pp. 1-28. ISSN 0954-4100 E-ISSN 2041-3025 (In Press)

K

Kafafy, Raed Ismail and Cao, Y. (2010) Modelling ion propulsion plume interactions with spacecraft in formation flight. Aeronautical Journal, 114 (1157). pp. 417-426. ISSN 0001-9240

Kamarudin, Mohamad Norfaieqwan and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Ibrahim, Yasser E. (2022) Buckling analysis of a thin-walled structure using finite element method and design of experiments. Aerospace, 9 (10). pp. 1-31. E-ISSN 2226-4310

Khan, Ambareen and Aabid, Abdul and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Baig, Muneer (2024) Comprehensive CFD analysis of base pressure control using quarter ribs in sudden expansion duct at sonic Mach numbers. International Journal of Thermofluids, 24. pp. 1-17. ISSN 2666-2027

Khan, Qudrat and Akmeliawati, Rini and Phan, Hoang Vu and Park, Hoon Cheol (2016) Linear model identification of beetle-mimicking flapping wing micro-air vehicle in hovering flight. In: 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors (IRIS), Tokyo, Japan.

Khan, Sher Afghan and Aabid, Abdul and Saleel, Ahmed (2019) Influence of micro jets on the flow development in the enlarged duct at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering, 19 (1). pp. 70-82. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Chaudhary, Zakir Ilahi and Shinde, Vilas B. (2018) Base pressure control by supersonic micro jets in a suddenly expanded nozzle. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (4). pp. 101-112. ISSN 2077-124X E-ISSN 2227-2771

Khan, Sher Afghan and Rathakrishnan, E. (2004) Control of suddenly expanded flow from correctly expanded nozzles. International Journal of Turbo & Jet-Engines, 21 (4). pp. 255-278. ISSN 0334-0082 E-ISSN 2191-0332

Khan, Sher Afghan and Rathakrishnan, E. (2006) Active control of base pressure in supersonic regime. Journal of Aerospace Engineering, Institution of Engineers, India, 87 (5). pp. 1-8. ISSN 0257-3423

Khan, Sher Afghan and Rathakrishnan, E. (2004) Active control of suddenly expanded flow from under expanded nozzles. International Journal of Turbo & Jet-Engines, 21 (4). pp. 233-253. ISSN 0334-0082 E-ISSN 2191-0332

Khan, Sher Afghan and Rathakrishnan, E. (2003) Control of suddenly expanded flows with micro-jets. International Journal of Turbo & Jet-Engines, 20 (1). pp. 63-81. ISSN 0334-0082 E-ISSN 2191-0332

Khosrowabadi, Reza and Quek, Chai and Ang, Kai Keng and Abdul Rahman, Abdul Wahab (2014) ERNN: A biologically inspired feedforward neural network to discriminate emotion from EEG signal. IEEE Transactions on Neural Networks and Learning Systems, 25 (3). pp. 609-620. ISSN 2162-237X

L

Labanieh, Mohamad Fateh and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Optimal location of piezoelectric patches for active vibration control. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur.

Legowo, Ari and Mohamad, Zahratu Hilall (2014) Investigation on flow visualization of beetle mimicking ornithopter. Asian Journal of Applied Sciences, 02 (06). pp. 893-897. ISSN 2321-0893

Legowo, Ari and Ramli, M. Faiz and Syafiq Shamsudin, Syariful (2016) Development of Sense and Avoid system based on multi sensor integration for unmanned vehicle system. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ludin@Jamaluddin, Hani and Omar, Ashraf Ali and Asrar, Waqar (2015) Numerical investigation of the flow over delta wing and reverse delta wing. In: Engineering Applications of Computational Fluid Dynamics. Advanced Structured Materials, 44 (44). Springer International publishing, Zurich, pp. 85-101. ISBN 978-3-319-02835-4 (print)

Ludin@Jamaluddin, Hani and Omar, Ashraf Ali and Asrar, Waqar (2015) Numerical study of effect of spoiler configuration on wake vortex alleviation. ASCE Journal of Aerospace Engineering , 28 (3). ISSN 0893-1321 (In Press)

M

M. Nasir, M. Nazreen and Mezeix, Laurent and Aminanda, Yulfian and Seman, Adam and Rivai, Ahmad and Ali, Karim Mansur (2016) Spring-back simulation of unidirectional carbon/epoxy L- shaped laminate composites manufactured through autoclave processing. In: Joint conference of 2nd International Manufacturing Engineering Conference ( iMEC 2015) & 3rd Asia-Pacific Conference on Manufacturing Systems (APCOMS 2015), 12th-14th November 2015, Kuala Lumpur, Malaysia.

Maidul, Isla and Okasha, Mohamed Elsayed Aly Abd Elaziz and Sulaeman, Erwin (2019) A Model Predictive Control (MPC) approach on unit quaternion orientation based quadrotor for trajectory tracking. International Journal of Control, Automation and Systems, 17 (11). pp. 2819-2832. ISSN 1598-6446 E-ISSN 2005-4092

Malik, Khurshid and Aldheeb, Mohammad and Asrar, Waqar and Sulaeman, Erwin (2019) Effects of bio-inspired surface roughness on a swept back tapered NACA 4412 wing. Journal of Aerospace Technology and Management, 11. e1719. ISSN 1984-9648 E-ISSN 2175-9146

Malik, Khurshid and Asrar, Waqar and Sulaeman, Erwin (2018) Low reynolds number numerical simulation of the aerodynamic coefficients of a 3D wing. International Journal of Aviation, Aeronautics, and Aerospace, 5 (1). pp. 1-27. ISSN 2374-6793

Mansor, Hasmah and Zaeri, Amir Hossein and Mohd Noor, Samsul Bahari and Raja Ahmad, Raja Kamil and Taip, Farah Saleena and Ali, Hazem Ibrahim (2010) Design of QFT controller for a bench-top helicopter system model. International Journal of Simulation, Systems, Science & Technology, 11 (4). pp. 9-17. ISSN 1473-8031(P); 1473-804X (O)

Mat Esa, Mohamad Khairul Azmi and Mansor, Hasmah and Gunawan, Teddy Surya and Janin, Zuriati (2019) Mamdani-based fuzzy logic controller for travel angle control of bench-top helicopter. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Mawlood, M.K. and Basri, S. and Asrar, Waqar and Omar, Ashraf Ali and Mokhtar, A.S. and Ahmad, M.M. (2006) Solution of Navier-Stokes equations by fourth-order compact schemes and AUSM flux splitting. International Journal of Numerical Methods for Heat & Fluid Flow, 16 (1). pp. 107-120. ISSN 0961-5539

Mohamed Ali, Jaafar Syed and Ismail, Nurhuda (2011) Educational software for stress analysis of thin-walled sections 2: Composite material. In: The International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2011), 17-19 May 2011, Kuala Lumpur.

Mohamed Ali, Jaafar Syed and Mustafa Kamal, Izyan Liyana and Ismail, Nurhuda (2010) Educational software for stress analysis of an aircraft fuselage. In: International Conference on Mechanical and Aerospace Engineering (ICMAE 2010), 26-28 Nov 2010, Kuala Lumpur, Malaysia.

Mohamed Ali, Jaffar Syed (2020) Role of educational software in remote teaching and learning. In: International E-conference on New Normal in Education 2020 (IENNE 2020), 28th-29th November 2020, Shah Alam, Selangor. (Unpublished)

Mohamed Ali, Jaffar Syed and Haron, Shahzatul Sakinah (2021) Stress analysis of composite aircraft wing using coupled fluid-structural analysis. CFD Letters, 13 (11). pp. 78-86. ISSN 2180-1363

Mohamed Ali, Jaffar Syed and Mizuar, Iqtidar (2020) MATLAB-Based educational tool for failure analysis of composite laminates. In: UNSPECIFIED.

Mohamed Ali, Jaffar Syed and W Embong, Wan Muhammad Hafizuddin and Aabid, Abdul and UNSPECIFIED (2021) Effect of cut-out shape on the stresses in aircraft wing ribs under aerodynamic load. CFD Letters, 13 (11). pp. 87-94. ISSN 2180-1363

Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Sulaeman, Erwin and Omar, Ashraf Ali (2016) A review on aerodynamics of nonflapping bird wings. Journal of Aerospace Technology and Management, 8 (1 (Jan-Mar)). pp. 7-17. ISSN 1984-9648 E-ISSN 2175-9146

Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Omar, Ashraf Ali and Altaf, Afaq and Sulaeman, Erwin (2020) Aerodynamics of symmetric permeable airfoils and wings: CFD simulation. Progress in Computational Fluid Dynamics, 20 (6). pp. 349-361. ISSN 1468-4349 E-ISSN 1741-5233

Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Omar, Ashraf Ali and Altaf, Afaq and Sulaeman, Erwin (2020) Effect of a directionally porous wing tip on tip vortex. Journal of Applied Fluid Mechanics, 13 (2). pp. 651-665. ISSN 1735-3572 E-ISSN 1735-3645

Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Sulaeman, Erwin and Omar, Ashraf Ali (2018) Aerodynamics of porous airfoils and wings. Acta Mechanica, online 1st. pp. 1-19. ISSN 0001-5970 E-ISSN 1619-6937 (In Press)

Mohammed Riyadh, Miah and Syed Mohamed Ali, Jaffar (2018) A matlab based educational software for the study on the effect of cut-out in aircraft wings. International Journal of Engineering & Technology, 7 (4.25). pp. 114-118. ISSN 2227-524X

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Comprehensive analysis of geometric hole designs and configurations in film cooling for gas turbine engines: a critical review. Journal of Aeronautics, Astronautics and Aviation, 56. pp. 187-218. ISSN 1990-7710

Muhammad Yuhendri, Yoga Farhans and Nik Mohd, Nik Ahmad Ridhwan and Mat, Shabudin and Mohd Nasir, Mohd Nazri and Othman, Norazila and Mohd Rafie, Azmin Shakrine and Azami, Muhammad Hanafi (2023) Impact of cowl deflections on scramjet intake aerodynamics with shock-on-lip condition. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 461-468. ISSN 1990-7710

Munshi, Adnan and Sulaeman, Erwin and Omar, Norfazzila and Ali, Mohammad Yeakub (2018) CFD analysis on the effect of winglet cant angle on aerodynamics of ONERA M6 wing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 44-54. ISSN 2289-7879

N

Nugroho, Larasmoyo and Akmeliawati, Rini (2018) Comparison of black-grey-white box approach in system identification of a flight vehicle. In: 6th International Seminar of Aerospace Science and Technology (ISAST 2018), 25th-26th Sept. 2018, Jakarta, Indonesia.

O

Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Ghaffar, Alia (2019) Satellite attitude tracking control using Lyapunov control theory. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 253-257. ISSN 2277-3878

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2014) Guidance, navigation and control for satellite proximity operations using Tschauner-Hempel equations. The Journal of the Astronautical Science, 60 (1). pp. 109-136. ISSN 2195-0571 (O), 0021-9142 (P)

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2015) Modeling, dynamics and control of spacecraft relative motion in a perturbed keplerian orbit. International Journal of Aeronautical and Space Sciences, 16 (1). pp. 77-88. ISSN 2093-2480 (O), 2093-274X (P) E-ISSN 2093-2480

Okasha, Mohamed Elsayed Aly Abd Elaziz and Park, Chandeok and Park, Sang-Young (2015) Guidance and control for satellite in-orbit-self-assembly proximity operations. Aerospace Science and Technology, 41. pp. 289-302. ISSN 1270-9638 E-ISSN 1626-3219

Olanrewaju, Rashidah Funke and Rosli, Rafhanah Shazwani and Balogun, Wasiu Adebayo (2016) Autonomous control of tilt tri-rotor unmanned aerial vehicle. Indian Journal of Science and Technology,, 9 (36). pp. 1-7. ISSN 0974-6846 E-ISSN 0974-5645

Omar, Ashraf Ali and Abd Rihem, Mohd Hafizuddin and Mohamad Hashim, Abdul Rahman and Saiful Bahri, Hani Maisara and Mohamed Noor, Marissa and Ahsanah, Ahmad Najmuddin and Mahmud Zuhudi, Nurul Farahana and Joari, Iqbal and Yazid, Ahmad Shahir (2010) Design, build and test IIUM remote controlled glider. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Omar, Ashraf Ali and Abdullah, Nur Azam and Simat @ Mohd Akhir, Ahmad Zaahin (2012) Development of IIUM circular planform unmanned aerial vehicle (IIUM-CPUAV). In: 3rd International Conference on Engineering & ICT (ICEI2012), 4-6 April 2012, Melaka, Malaysia. (Unpublished)

Omar, Ashraf Ali and Altaf, Alaman and Azwir, Ahmad Rizal and Abdul Rahman, Mohd Amirul (2011) Experimental investigation of the flow over IIUM-MAV using six component balance test and particle image velocimetry. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011, ICMAAE 11 , 17-19 May, 2011, Kuala Lumpur .

Omar, Ashraf Ali and Cheong, Zi Jian (2009) Development of International Islamic University Malaysia-Micro Aerial Vehicle (IIUM-MAV). In: 2nd CUTSE International Conference, 24-25 Nov 2009, Miri, Sarawak.

Omar, Ashraf Ali and Kurban, Adel and Baharuddin, Khairun Nisaa and Ibrahim, Idasary (2010) Development of IIUM Free Wing Unmanned Aerial Vehicle (IIUM-FWUAV). In: The 2nd International Conference on Engineering and ICT , 18-20 Feb. 2010, Melaka, Malaysia.

Omar, Ashraf Ali and Mohd Yusof, Mohammad Fairuzi and Mohd Sani, Mohd Afnan (2010) Experimental investigation of free wing IIUM-UAV configuration. In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment, 14-16 April 2010, Sarawak, Malaysia.

Omar, Ashraf Ali E. (2012) IIUM Geobat flying saucer: design, fabrication and testing. Research Report. s.n., Kuala Lumpur. (Unpublished)

Omar, Ashraf Ali E. and Jamaluddin, Hani Ludin and Asrar, Waqar (2012) Numerical investigation of the vortical flow over delta wing and reverse delta wing. In: 6th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2012), 1-4 July 2012, Istanbul, Turkey. (Unpublished)

Omar, Ashraf Ali E. and Kurban, Adel (2011) Design, fabrication and experimental testing of IIUM free wing unmanned aerial vehicle (IIUM-FWUAV). Australian Journal of Basic and Applied Sciences, 5 (6). pp. 381-389. ISSN 1991-8178

Ong, Jiunn Chit and Omar, Ashraf Ali and Asrar, Waqar (2011) The accuracy of the gas-kinetic BGK finite difference method for solving 3-D compressible inviscid flows. In: International MultiConference of Engineers and Computer Scientists 2011 (IMECS 2011), , 16-18 March 2011, Hong Kong.

Ong, Jiunn Chit and Omar, Ashraf Ali and Asrar, Waqar and Hamdan, Megat M. (2004) The Efficiency of Gas-Kinetic BGK scheme for solving 2-d compressible inviscid regular shock reflection problem. In: European Congress on Computational Methods in Applied Sciences and Engineering, 24-28 July 2004 , Jyvaskyla, Findland.

Ong, Jiunn Chit and Omar, Ashraf Ali and Asrar, Waqar and Ismail, Ahmad Faris (2008) A gas-kinetic BGK solver for two-dimensional turbulent compressible flow. In: International Conference on Scientific Computing , July 14-17, 2008, Las Vegas, Nevada, USA.

Ong, Jiunn Chit and Omar, Ashraf Ali E. and Asrar, Waqar (2013) A BGK-based two-equation turbulence model algorithm for solving compressible navier-stokes equations. CFD Letters, 6 (2). pp. 46-61. ISSN 2180-1363

Ong, Jiunn Chit and Omar, Ashraf Ali E. and Asrar, Waqar (2009) Reynolds averaged navier-stokes flow computation of RAE2822 airfoil using gas-kinetic BGK Scheme. In: International MultiConference of Engineers and Computer Scientists (IMECS), 18 - 20 March 2009, Hong Kong.

P

Pathan, Khizer Ahmed and Dabeer, P. S. and Khan, Sher Afghan (2018) Optimization of area ratio and thrust in suddenly expanded flow at supersonic Mach numbers. Case Study in Thermal Engineering, 12. pp. 696-700. ISSN 2214-157X

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Investigation of base pressure variations in internal and external suddenly expanded flows using CFD analysis. CFD Letters, 11 (4). pp. 32-40. ISSN 2180-1363

Pavithra, Shanbhag, and Bashir, Musavir and S, Lavanya and Khan, Sher Afghan (2016) Estimation of stability derivatives in pitch for an oscillating 2-D wedge in supersonic Flow. Advances and Applications in Fluid Mechanics, 19 (4). pp. 873-882. ISSN 0973-4686

Ping, Julian T.K. and Andan, Amelda D. and Asrar, Waqar and Omar, Ashraf Ali (2010) Development of the IIUM hybrid airship. In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment, 14-16 April 2010, Sarawak, Malaysia.

Q

Quadros, Jaimon D. and Khan, Sher Afghan and Sapkota, Sanjeev and John, Vikrama and Prashanth, T (2020) On recirculation region length of suddenly expanded supersonic flows, using CFD and fuzzy logic. International Journal of Computational Fluid Dynamics. pp. 1-17. ISSN 1061-8562 E-ISSN 1029-0257 (In Press)

Quadros, Jaimon Dennis and Khan, Sher Afghan (2020) Prediction of base pressure in a suddenly expanded flow the processes at supersonic Mach Number Regimes using ANN and CFD. Journal of Applied Fluid Mechanics, 13 (2). pp. 499-511. ISSN 1735-3572 E-ISSN 1735-3645

Quadros, Jaimon Dennis and Khan, Sher Afghan and A. J., Antony and Vas, Jolene S. (2016) Experimental and numerical studies on flow from axisymmetric nozzle flow with sudden expansion for Mach 3.0 using CFD. In: International Conference on Energy Systems and Developments (ICESD2016), 19th-20th Feb. 2016, Pune, India.

R

Ramli, M. Faiz and Legowo, Ari and Shamsudin, Syariful Syafiq (2017) Object detection technique for small unmanned aerial vehicle. In: 6th International Conference on Mechatronics (ICOM'17), 8th-9th August 2017, Kuala Lumpur.

Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2020) Analytical estimation of stability derivatives of wing with curved leading edges at hypersonic mach number. Test Engineering & Management, 83 (2). pp. 13808-13819. ISSN 0193-4120

Rosli, Danial and Sulaeman, Erwin and Legowo, Ari and Abdul Ghaffar, Alia Farhana (2022) Stability derivative identification using adaptive robust extended kalman filter for multirotor unmanned aerial vehicle (M-UAV). In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 . Springer, Singapore, pp. 391-401. ISBN 1876-1100, 1876-1119 (electronic)

S

Salleh, Hafiz and Saharin, Sanisah and Azmi, Mohammad Hanafi and Khan, Sher Afghan (2018) Fluid-structure interactions of variable span wings in low Reynold flows. International Journal of Engineering & Technology, 7 (3.29). pp. 381-385. ISSN 2227-524X

Samuel, Merryisha and Rajendran, Parvathy and Khan, Sher Afghan (2022) CFD Simulation of NACA 2412 airfoil with new cavity shapes. Advances in Aircraft and Spacecraft, 9 (2). pp. 131-148. ISSN 2287-528X E-ISSN 2287-5271

Shabana, Ayesha and Bayar, Anitha Dayanand and Crasta, Asha and Khan, Sher Afghan and Baig, Maughal Ahmed Ali and Reddy, Voggu Kesava (2023) Evaluation of stability derivatives of an Ogive in a Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Progresses and challenges of composite laminates in thin-walled structures: a systematic review. ACS Omega, 8 (34). pp. 30824-30837. E-ISSN 2470-1343

Shabbir Ahmed, Omar and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2024) Parametric analysis of critical buckling in composite laminate structures under mechanical and thermal loads: a finite element and machine learning approach. Materials, 17 (17). pp. 1-27. E-ISSN 1996-1944

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ahmad, Meor iqram Meor (2021) Numerical investigation on the damage of whirling engine blades subjected to bird strike impact. Journal of Aeronautics, Astronautics and Aviation, 53 (2). pp. 193-199. ISSN 1990-7710

Shaikh, Javed S. and Kumar, Krishna and Pathan, Khizar A. and Khan, Sher Afghan (2023) Computational analysis of surface pressure distribution over a 2D wedge in the supersonic and hypersonic flow regimes. Fluid Dynamics and Materials Processing, 19 (6). pp. 1637-1653. ISSN 1555-256X E-ISSN 1555-2578

Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2023) Evaluation of derivative in damping in the Newtonian limit for non-planar wedge. Materials Today. pp. 1-3. ISSN 2214-7853

Shamitha, Shamitha and Crasta, Asha and Pathan, Khizar Ahmed and Khan, Sher Afghan (2023) Numerical simulation of surface pressure of a wedge at supersonic Mach numbers and application of design of experiments. Journal of Advanced Research in Applied Mechanics, 101 (1). pp. 1-18. E-ISSN 2289-7895

Shamsuddin, Mohd Firdaus and Azami, Muhammad Hanafi and Mohd Zaki, Hasan Firdaus and Abdullah, Nur Azam (2022) Effect of color contrast to the accuracy of SSD-MobileNetV2. International Journal of Intelligent Systems and Applications in Engineering, 10 (3). pp. 18-21. ISSN 2147-6799

Sheikh, Javed S and Pathan, Khizar Ahmed and Kumar, Krishna and Khan, Sher Afghan (2023) Effectiveness of cone angle on surface pressure distribution along slant length of a cone at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104 (1). pp. 185-203. ISSN 2289-7879

Shetty, Shamitha and Crasta, Asha and Khan, Sher Afghan (2024) Evaluation of derivative in damping in the Newtonian limit for non-planar wedge. Materials Today, 100. pp. 1-3. ISSN 2214-7853

Shetty, Shamitha and Crasta, Asha and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2024) Effect of sweptback angle of a delta wing on surface pressure distribution at supersonic Mach numbers. Fluid Dynamics and Material Processing, 20 (10). pp. 2353-2376. ISSN 1555-256X E-ISSN 1555-2578

Siddiqui, Naseeb and Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Sulaeman, Erwin (2018) Experimental investigation of a new spiral wingtip. International Journal of Aviation, Aeronautics, and Aerospace, 5 (2). pp. 1-32. ISSN 2374-6793

Sulaeman, Erwin (2011) Accurate geometric stiffness matrix formulation of beam finite element. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 190-197. ISBN ISBN 978-967-418-148-2

Sulaeman, Erwin (2011) Axial stiffness matrix of non-uniform Bernoulli-Euler bar element. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 233-239. ISBN ISBN 978-967-418-148-2

Sulaeman, Erwin (2012) On the evaluation of negative altitude requirement for flutter speed boundary of transport aircraft and UAV. Applied Mechanics and Materials, 225. pp. 397-402. ISSN 1660-9336

Sulaeman, Erwin and Abdullah, Nur Azam and Kashif, Syed Muhammad (2017) Aeroelastic passive control optimization of supersonic composite wing with external stores. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Sulaeman, Erwin and Ahmed, Layeeq (2014) Approximate function for unsteady aerodynamic kernel function of aeroelastic lifting surfaces. IIUM Engineering Journal, 15 (1). pp. 71-79. ISSN 1511-788X (P) 2289-7860 (O)

Sulaeman, Erwin and Layeeq, Ahmed (2013) Alternate approximate function for kernel function of oscillating lifting surfaces. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Berjaya Time Square Hotel, Kuala Lumpur. (Unpublished)

Suliman , M. M. Ali and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar (2013) Flow visualization over a circular planform wing. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Suliman , M. M. Ali and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and M. Syuhairi |, M. Husain (2013) Numerical simulation of a low aspect ratio wing at low Reynolds number. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Syed, Syed Ashfaq and Khan, Sher Afgha (2015) Combined effect of relief and level of expansion in a suddenly expanded flow. IOSR Journal , 12 (5). pp. 52-59. ISSN e-ISSN: 2279-0837, p-ISSN: 2279-0845.

Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Mohamed Ali, Jaffar Syed and Shaik Dawood, Mohd. Sultan Ibrahim (2021) Crash analysis of aircraft composite fuselage under belly landing. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia. (Unpublished)

Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Rosli, Adib Hamdani (2023) Influence of composite skin on the energy absorption characteristics of an aircraft fuselage. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 13-20. E-ISSN 0128-1852

Syed Mohamed Ali, Jaffar and ., Hasna Nur Fadhila and Aziz, Nor Azhanadia (2013) Educational software for stress analysis of idealized thin walled open sections. Applied Mechanics and Materials, 315. pp. 339-343. ISSN 1660-9336 (O), 978-303785262-0 (P)

Syed Mohamed Ali, Jaffar and Alsubari, Saleh and Aminanda, Yulfian (2016) Hygrothermoelastic analysis of orthotropic cylindrical shells. Latin American Journal of Solids and Structures, 13 (3). pp. 573-589. ISSN 1679-7825 (O), 1679-7817 (P) E-ISSN 1679-7825

Syed Mohamed Ali, Jaffar and Amran, Mohd Farid and Mohamad, Nurul Aziz (2021) Experimental study on the effect of boundary layer control on the aerodynamics characteristics of NACA 0021 Aerofoil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. ISSN 2811 - 3950 (In Press)

Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Masturah, Mohamad (2018) Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 9-17. E-ISSN 0128-1852

Syed Mohamed Ali, Jaffar and M.J.A ., Muhammad Nazri (2024) Optimization of composite fuselage frame layup for energy absorption under crash loading. Journal of Advanced Research in Applied Mechanics, 122 (1). pp. 111-129. E-ISSN 2289-7895

Syed Mohamed Ali, Jaffar and M.Shaari, Muhammad Hafiz (2023) Numerical study on stability of oblique wing configuration. In: IIUM Engineering Congress, 15-16 August 2023, KOE ,IIUM.

Syed Mohamed Ali, Jaffar and M.Y., Hasfareeza (2017) Crash analysis of an aircraft fuselage under belly landing. International Journal of Recent Research Aspects, 4 (4). pp. 73-76. ISSN 2349-7688

Syed Mohamed Ali, Jaffar and Mad Nasib, Wan Muzamir and Che Basir, Haqmal Aqif (2024) Educational software for stress analysis of open thin-walled structures. Journal of Advanced Research in Applied Mechanics, 126 (1). pp. 149-164. E-ISSN 2289-7895

Syed Mohamed Ali, Jaffar and Muhammad Muhaimin, M.Y. and Muhammad Faizal, C.N (2013) Design and development of IIUM hovercraft. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Syed Muhammad, Kashif and Tariq, M. (2013) Analysis of composite box beam with piezoelectric actuators using ANSYS. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2nd-4th Jul. 2013, Kuala Lumpur, Malaysia.

T

Toha, Siti Fauziah and Julai, S. and Tokhi, M. Osman (2012) Ant colony based model prediction of a twin rotor system. Procedia Engineering, 41. pp. 1135-1144. ISSN 1877-7058

Toha, Siti Fauziah and Tokhi, M. O. (2010) Parametric modelling application to a twin rotor system using recursive least squares, genetic, and swarm optimization techniques. Journal of Aerospace Engineering, 224 (9). pp. 961-977. ISSN 0954-4100(print), 2041-3025(online)

U

Ul Haque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2014) Comparison of digital DATCOM and wind tunnel data of a winged hybrid airship’s generic model. In: AEROTECH V, 29-30 Oktober 2014, Kuala Lumpur.

Ul Haque, Anwar and Asrar, Waqar and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali (2015) Power-off static stability analysis of a clean configuration of a hybrid buoyant aircraft. In: 8th Ankara International Aerospace Conference 2015, 10th-12th Sept. 2015, Metu, Ankara, Turkey.

UlHaque, Anwar and Asrar, Waqar and Amri Hafiz, Nik Mohammad and Kashif, Syed Muhammad and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2015) Design and fabrication of a winged hybrid airship model for IIUM-LSWT. Advanced Materials Research, 1115. pp. 513-516. ISSN 1022-6680

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2017) Effect of diamond shaped strut with cylindrical pitch rod in subsonic wind tunnel testing. Measurement: Journal of the International Measurement Confederation, 99. pp. 1-6. ISSN 0263-2241 E-ISSN 1536-6359

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2016) Wind tunnel testing on a generic model of a hybrid lifting hull. Journal of Aerospace Technology and Management, 8 (4). pp. 467-474. ISSN 1984-9648 E-ISSN 2175-9146

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2016) Assessment of engine's power budget for hydrogen powered hybrid buoyant aircraft. Propulsion and Power Research, 5 (1). pp. 34-44. ISSN 2212-540X

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2014) Conceptual design of a winged hybrid airship. In: 21st Lighter than Air Technology Conference, Aviation 2014, 16 - 20 June 2014, Atlanta, Ga., USA.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2016) Effect of side wind on the directional stability and aerodynamics of a hybrid buoyant aircraft. In: 2015 International Conference on Mechanical Engineering and Electrical Systems (ICMES 2015), 16th-18th December 2015, Singapore.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2016) Effect of wing loading on gross takeoff mass of a hybrid buoyant aircraft. International Journal of Unmanned Systems Engineering, 4 (1). pp. 11-22. ISSN 2052-112X

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2014) Stability and takeoff ground roll issues of hybrid buoyant aircraft. In: 5TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2014 (ICME2014) , 29th-30th October 2014, Bandung.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2017) Wind tunnel testing of hybrid buoyant aerial vehicle. Aircraft Engineering and Aerospace Technology, 89 (1). pp. 99-105. ISSN 0002-2667

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2017) Yawing force of electric trimmers of a hybrid buoyant aerial vehicle. Pertanika J Sci and tech, 25 (1). pp. 293-302. ISSN 0128-7680 E-ISSN 2231-8526

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Mohamed Ali, Jaffar Syed (2016) Framework of conceptual design methodology for hybrid buoyant aircraft. Aerotecnica Missili & Spazio = The Journal of Aerospace Science, Technology and Systems, 95 (2 (April-June)). pp. 99-110.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Mohammad Ali, Jaffar Syed (2015) Cambered profile of a California sea lion's body. The Journal of Experimental Biology, 218. pp. 1270-1271. ISSN 0022-0949

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Aerostatic and aerodynamic modules of a hybrid buoyant aircraft: an analytical approach. IIUM Engineering Journal, 16 (1). pp. 9-17. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Establishing the analytical relationships for mass and volumetric mass fractions for hybrid boyant aircraft. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, Gombak Campus, IIUM. (Unpublished)

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Half model testing for canard of a hybrid buoyant aircraft. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (10). pp. 1544-1547.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2017) Hybrid buoyant aircraft: future STOL aircraft for interconnectivity of the Malaysian islands. Journal of Aviation Technology and Engineering, 6 (2). pp. 80-88. ISSN 2159-6670

UlHaque, Anwar and Asrar, Waqar and Syed Mohamed Ali, Jaffar and Sulaeman, Erwin (2016) Establishing the analytical relationships for mass and volumetric mass fractions for hybrid buoyant aircraft. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 286-291. ISSN 1819-6608

Ungku, Abdul Hafiz and Hoda, Asif and Asrar, Waqar (2015) A numerical investigation of explicit pressure-correction projection methods for incompressible flows. Engineering Applications of Computational Fluid Mechanics. pp. 1-16. ISSN 1994-2060 (P) 1997-003X (O)

Unuh., M. H. and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati and Ismail, Mohamad Amiruddin (2018) Vibration isolation analysis of new design OEM damper for malaysia vehicle suspension system featuring MR fluid. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

ul-Haque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2014) Static longitudinal stability of a hybrid airship. In: 11th International Bhurban Conference on Applied Sciences & Technology (IBCAST), 14th-18th January 2014, Islamabad, Pakistan.

W

Wan A Hamid, Wan Luqman Hakim and Iannucci, Lorenzo and Robinson, Paul (2023) Flexural behaviour of 3D-printed carbon fibre composites: experimental and virtual tests - application to composite adaptive structure. Composites Part C: Open Access, 10. pp. 1-11. E-ISSN 2666-6820

Wan A Hamid, Wan Luqman Hakim and Iannucci, Lorenzo and Robinson, Paul (2017) Morphing Wing I - finite element modelling of a NiTi SMA wire. In: 8th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2017), 5 - 8 June 2017, Madrid, Spain.

Wan A Hamid, Wan Luqman Hakim and Lannucci, Lorenzo and Robinson, Paul (2020) Finite-element modelling of NiTi shape-memory wires for morphing aerofoils. The Aeronautical Journal, 124 (1281). pp. 1740-1760. ISSN 0001-9240 E-ISSN 2059-6464

Wan Yahya, M.Z. and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Warimani, Mohammad Salman (2019) Modelling of a three-shaft high-bypass-ratio engine performance and emission prediction using hydrogen fuels. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3). pp. 484-490. ISSN 2278-3075

Warimani, Mahammad Salaman and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Investigation of aircraft engine performance utilizing various alternative fuels. In: Southeast Asia Workshop on Aerospace Engineering (SAWAE 2019), 29 - 30 Aug 2019, Kuala Lumpur.

Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Study of feasibility of pulse detonation engine powered by alternative fuels. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 291-296. ISSN 2249–8958

Wirawan, Nanda and Abdullah, Nur Azam and Akbar, Mahesa and Curiel-Sosa, J.L. (2018) Analysis on cracked commuter aircraft wing under dynamic cruise load by means of XFEM. In: Modern Practice in Stress and Vibration Analysis (MPSVA) 2018, 2nd-4th July 2018, Cambridge, UK.

Z

Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2023) Study on the lateral torsional buckling of composite thin-walled beam. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET 2021), 8th - 10th November 2021, Bandar Seri Begawan, Brunei Darussalam (Virtual).

Zakaria, Mohd Hafizu and Aminanda, Yulfian and Ahmad Rashidi, Syazwan and Mohamed Shah @ Mat Sah, Mohamed Sallauddin (2018) Spring-back of thick uni-directional carbon fibre reinforced composite laminate for aircraft structure application. In: 5th International Seminar on Aerospace Science and Technology (ISAST 2017), 27th-29th Sept. 2017, Medan, North Sumatra; Indonesia.

Zakaria, Mohd Sharif and Abas, Mohammad Fadhil and Dg Jamil, Fatimah and Mohd Saad, Norhafidzah and Hashim, Addie Irawan and Pebrianti, Dwi (2024) Detecting problematic vibration on unmanned aerial vehicles via genetic-algorithm methods. In: 20th International Colloquium on Signal Processing & Its Applications (CSPA 2024), 1st - 2nd March 2024, Langkawi, Malaysia.

Zayan, Jalal Mohammad and Asrar, Waqar and Hoda, Asif (2013) Experimental investigation of a vertical round free turbulent jet. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Berjaya Time Square Hotel, Kuala Lumpur.

Zharif, M. and Khan, Md. Raisuddin and Billah, Md. Masum (2011) Development of a jet powered floating platform (in air). In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 104-108. ISBN 9789674181734

Zohary, Aideal Czar and Asrar, Waqar and Aldheeb, Mohammed (2023) A successful microblowing strategy for airfoils. Progress in Computational Fluid Dynamics, 23 (3). pp. 131-145. ISSN 1468-4349 E-ISSN 1741-5233

Zohary, Aideal Czar and Asrar, Waqar and Mohammed Aldheeb, Mohammed Abdulmalek (2021) Numerical investigation on the pressure drag of some low-speed airfoils for UAV application. CFD Letters, 13 (2). pp. 29-48. ISSN 2180-1363

Zulkifli, Mohammad and Omar, Ashraf Ali and Asrar, Waqar (2014) Arbitrary Lagrangian-Eulerian Form of Flowfield Dependent Variation (ALE-FDV) Method for 3D Problems. In: 22nd Annual Conference of the CFD Society of Canada, 1-4 Jun 2014, Toronto Canada. (In Press)

Zulkifli, Mohammad and Omar, Ashraf Ali and Asrar, Waqar (2015) Flowfield dependent variation method for one dimensional stationary and moving boundary problems. International Journal of Computational Science and Engineering, 10 (1/2). pp. 130-144. ISSN 1742-7193 (O), 1742-7185 (P)

Zulkifli, Mohd fadhli and Omar, Ashraf Ali and Asrar, Waqar (2014) Arbitrary lagrangian-eulerian form of flowfield dependent variation method for moving boundary problems. In: Aviation 2014 - 32nd AIAA Applied Aerodynamics Conference 2014, 16 June - 20 June 2014, Atlanta, GA; United States.

Zuraidi, Nur Husnina Muhamad and Khan, Sher Afghan and Mohammed Sapardi, Mohd Azan and Dixit, Saurav (2024) Passive control of base pressure and the flow development in a duct with sudden expansion at sonic Mach number. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 123 (2). pp. 111-139. E-ISSN 2289-7879