Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ170 Mechanics applied to machinery. Dynamics"

Article

A. Muthalif, Asan G. and Wahid, Azni Nabela (2021) Optimal piezoelectric shunt dampers for non‑deterministic substructure vibration control: estimation and parametric investigation. Nature: Scientific Report, 11 (1). pp. 1-15. ISSN 2045-2322

Abdul Rahman, Nur Salihah and Al Hazza, Muataz Hazza Faizi and Kays, Emrul (2018) Minimizing makespan of multimachine production system in flow shop environment by means of mixed integer programming model. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1101-1110. ISSN 0976-6340 E-ISSN 0976-6359

Abdullah, Nur Azam (2021) Adaptasi teknologi, persekitaran tingkat keberkesanan produk. Berita Harian, 17 April 2021. p. 12.

Abdullah, Nur Azam (2021) Energy-harvesting via wind interaction: a sustainable flight is a dream for the development of modern aircraft. @green, 1 (8). pp. 20-21. ISSN 2756-7818

Abdullah, Nur Azam (2024) Kajian pergolakan udara ekstrem dalam pesawat perlu berterusan. Berita Harian, MukaSepuluh (26hb Mei 2024). p. 10.

Abdullah, Nur Azam (2020) Medium-altitude long-endurance (MALE) UAV: worth buying or developing a new one? AirForce Digest, 13. pp. 34-37. ISSN 2289-327X

Abdullah, Nur Azam (2021) Segerakan penggantian Hawk tingkat keupayaan aset TUDM. Berita Harian, 29 November 2021. p. 12.

Abdullah, Nur Azam (2021) Transfer of technology can help us produce high-skilled workers. New Straits Times, 2 December 2021. p. 13.

Abdullah, Nur Azam and Akbar, Mahesa and Wirawan, Nanda and Curiel-Sosa, Jose Luis (2019) Structural integrity assessment on cracked composites interaction with aeroelastic constraint by means of XFEM. Composite Structures. ISSN 0263-8223

Abdullah, Nur Azam and Azami, Muhammad Hanafi (2021) Penerokaan angkasa lepas buka potensi teknologi aras tinggi. Berita Harian: Rencana, 24 September 2021. p. 10.

Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Akbar, Mahesa (2018) Aeroelastic assessment of cracked composite plate by means of fully coupled finite element and Doublet Lattice Method. Composite Structures, 202 (SI:Ian Marshall). pp. 151-161. ISSN 0263-8223

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Ismail, Izham Izzat and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Abidin, Zulkifli Zainal and Abu Bakar, Ahmad Joahari and Dani, Noriza (2021) Flow behaviour assessment of Smokey SAM rocket prototype. CFD Letters, 13 (9). pp. 42-56. ISSN 2180-1363

Abdullah, Nur Azam and Mohamed Afandi, Mohamed Azizul (2021) Selami sains aerodinamik dalam sukan berbasikal. Berita Harian, 16 February 2021. p. 11.

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor Iqram (2021) Numerical modelling of bird strike on aerospace structures by means of coupling FE-SPH. International Journal of Integrated Engineering, 13 (7). pp. 185-193. ISSN 2229-838X E-ISSN 2600-7916

Ahmad, Meor Iqram Meor and Akbar, Mahesa and Abdullah, Nur Azam (2022) Development of constitutive creep damage-based modified Robinson-Rousselier (MRR) model with XFEM for void-crack relation in ductile materials. Mechanics of Time-Dependent Materials, 25 (4). ISSN 1385-2000 E-ISSN 1573-2738

Ahmad, Meor Iqram Meor and Sabri, Mohd Anas Mohd and Tahir, Mohd Faizal Mat and Abdullah, Nur Azam (2022) Predictive modelling of creep crack initiation and growth using Extended Finite Element Method (XFEM). Frattura ed Integrità Strutturale, 16 (61). pp. 119-129. ISSN 1971-8993 (In Press)

Ahmad, Salmiah and Siddique, Nazmul H. and Tokhi, M. Osman (2014) Modelling and simulation of double-link scenario in a two-wheeled wheelchair. Integrated Computer-Aided Engineering, 21 (2). pp. 119-132. ISSN 1069-2509

Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. Australian Journal of Basic and Applied Sciences, 8 (15 ). pp. 18-24. ISSN 1991-8178

Akhlaq, Adnan and Shaik Dawood, Mohd. Sultan Ibrahim and Jaffar Syed, Mohamed Ali and Sulaeman, Erwin (2023) A study on the effect of piezoelectric nonlinearity on the bending behaviour of smart laminated composite beam. Materials, 16 (7). pp. 1-19. E-ISSN 1996-1944

Baghdadi, Faical and Hrairi, Meftah and Asrar, Waqar (2024) A numerical comparison of 2D and 3D CFD modelling for contraction and expansion geometries with an emphasis on solid particles erosion. CFD Letters, 16 (6). pp. 157-168. E-ISSN 2180 - 1363

BenLahcene, Zohir and Hasbullah, Faried and Faris, Waleed Fekry (2014) A comparative ride performance of passive, semi-active and active suspension systems for off-road vehicles using half car model. International Journal of Heavy Vehicle Systems (IJHVS), 21 (1). pp. 26-41. ISSN 1741-5152 (O), 1744-232X (P)

Darsivan, Fadly Jashi and Faris, Waleed Fekry and Martono, Wahyudi (2008) Active engine mounting controller using extended minimal resource allocating networks. International Journal of Vehicle Noise and Vibration, 4 (2). pp. 150-168. ISSN 1479-148X (O),1479-1471 (P)

El-Hafidi, Ali and Martin , Bruno and Faris, Waleed Fekry and Lay, Béatrice (2011) A study of noise transmission through cylindrical shell using modal truncation approach. International Journal of Vehicle Noise and Vibration, 7 (3). pp. 271-284. ISSN 1479-148X (O), 1479-1471 (P)

FB, Sayyad and B., Kumar and Khan, Sher Afghan (2013) Approximate analytical method for damage detection in free–free beam by measurement of axial vibrations. International Journal of Damage Mechanics, 22 (1). pp. 133-142. ISSN 1530-7921

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2010) Assessment of different semi-active control strategies on the performance of off-road vehicle suspension systems. International Journal of Vehicle Systems Modelling and Testing , 5 (2-3). pp. 254-271. ISSN 1745-6444

Faris, Waleed Fekry and Saad, Fazidah (2010) Dynamic characterisation of elastomeric engine mounts of different geometry used in automotive industry: simulation approach. International Journal of Vehicle Noise and Vibration, 6 (1). pp. 1-39. ISSN 1479-148X (O), 1479-1471 (P)

Hanouf, Zahir Ahmad and Faris, Waleed Fekry (2009) Investigation into noise problems in vehicle structure using vibro-acoustic approach. International Journal of Vehicle Noise and Vibration, 5 (3). pp. 238-260. ISSN 1479-148X (O), 1479-1471 (P)

Hasbullah, Faried and Faris, Waleed Fekry (2010) An evaluation of LQR and fuzzy logic controllers for active suspension using half car model. International Journal of Vehicle Noise and Vibration, 6 (2/3/4). pp. 200-214. ISSN 1479-148X (O), 1479-1471 (P)

Hrairi, Meftah and Ali, Arafath and Rizk, Abd El-Fattah (2012) Analysis of thermal stress intensity factors for edge cracked bimaterial system. Advanced Materials Research, 576. pp. 766-769. ISSN 1022-6680

Hrairi, Meftah and Mohammad, Masturah and Ismail, Siti Maisara (2012) Monitoring of fatigue damage using ultrasonics and finite element analysis. Advanced Materials Research, 576. pp. 655-658. ISSN 1022-6680

Hussain Shah, Qasim (2011) Experimental and numerical study on the orthogonal and oblique impact on water filled pipes. International Journal of Impact Engineering, 38. pp. 330-338. ISSN 0734-743X

Hussain Shah, Qasim (2009) Impact resistance of a rectangular polycarbonate armor plate subjected to single and multiple impacts. International Journal of Impact Engineering, 36. pp. 1128-1135. ISSN 0734-743X

Hussain Shah, Qasim and Mujahid, Mohammad and Al-Atabi, Mushtak and Abakrb, Yousif A. (2011) Load carrying capability of liquid filled cylindrical shell structures under axial compression. Journal of Engineering Science and Technology , 6 (4). pp. 516-526. ISSN 1823-4690

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2007) Dynamics and control policies analysis of semi-active suspension systems using a full-car model. International Journal of Vehicle Noise & Vibration, 3 (4). pp. 370-405. ISSN 1479-148X

Kathri, Naveed and Darsivan, Fadly Jashi and Waleed Fekry, Faris and Ismail, Ahmad Faris (2020) Fatigue life study of suspension ball joints on the basis of ride quality. International Journal of Vehicle Noise and Vibration, 16 (1/2). pp. 69-84. ISSN 1479-1471 E-ISSN 1479-148X

Mohamad Hanif, Noor Hazrin Hany and Chappell, Paul Hammond and White, Neil Maurice and Cranny, Andy (2018) A psychophysical investigation on vibrotactile sensing for transradial prosthesis users. Cogent Engineering, 5 (1). pp. 1-14. ISSN 2331-1916

Mohd Yusof, Nur Hidayah and Hamzaid, Nur Azah and Jasni, Farahiyah and Khin, Wee Lai (2019) In-socket sensory system with an adaptive neuro-based fuzzy inference system for active transfemoral prosthetic legs. Journal of Electronic Imaging, 28 (2). p. 1. ISSN 1017-9909 E-ISSN 1560-229X

Mokhtar, Suhaily and Yusof, Nur Syahira Sofyani and Mohd Asri, Mohd Ashraff and Che Haron, Che Hassan and A. Raof, Natasha and Muhammad Khairusalleh, Nor Khairusshima and Dahnel, Aishah Najiah (2020) Effects of drilled area temperatures on drilling of NFRP composites: a review. TEST Engineering & Management, 83 (May – June 2020). 1314 -1321. ISSN 0193-4120

Nafiah, Faris and Sophian, Ali and Khan, Md. Raisuddin and Abdul Hamid, Syamsul Bahrin and Zainal Abidin, Ilham Mukriz (2019) Image-based feature extraction technique for inclined crack quantification using pulsed eddy current. Chinese Journal of Mechanical Engineering (English Edition), 32 (1). pp. 1-9. ISSN 1000-9345 E-ISSN 2192-8258

Nafiah, Faris and Sophian, Ali and Khan, Md. Raisuddin and Zainal Abidin, Ilham Mukriz (2019) Quantitative evaluation of crack depths and angles for pulsed eddy current non-destructive testing. NDT and E International, 102. pp. 180-188. ISSN 0963-8695

Norsahperi, N.M.H. and Ahmad, Salmiah and Toha @ Tohara, Siti Fauziah and Abd Mutalib, Mohd Azri (2022) Design, simulation and experiment of PSO-FOPID controller for height position control of a scissor mechanism platform. FME Transactions, 50 (1). pp. 46-54. ISSN 1451-2092 E-ISSN 2406-128X

Norsahperi, Nor Mohd Haziq and Toha @ Tohara, Siti Fauziah and Ahmad, Salmiah and Mahmood, Iskandar Al Thani Bin (2021) Analysis and practical validation on a multi-linkage scissor platforms drive system for the satellite test facilities. International Journal of Heavy Vehicle Systems, 28 (1). pp. 1-14. ISSN 1744-232X E-ISSN 1741-5152

Nurdin, Irwan and Yaacob, Iskandar Idris and Johan, Mohd. Rafie (2016) Enhancement of thermal conductivity and kinematic viscosity in magnetically controllable maghemite (γ-Fe2O3) nanofluids. Experiment Thermal and Fluid Science, 77. pp. 265-271. ISSN 0894-1777

Quadros, Jaimon Dennis and Khan, Sher Afghan (2020) Prediction of base pressure in a suddenly expanded flow process at supersonic mach number regimes using ANN and CFD. Journal of Applied Fluid Mechanics, 13 (2). pp. 499-511. ISSN 1735-3572 E-ISSN 1735-3645

Rahman, Md Atiqur and Abdul Aziz, Mohammad and Ruhul, A.M. and Rashid, Muhammad Mahbubur (2017) Biodiesel production process optimization from spirulina maxima microalgae and performance investigation in a diesel engine. Journal of Mechanical Science and Technology, 31 (6). pp. 3025-3033. ISSN 1738-494X E-ISSN 1976-3824

Ramli, Nabilah and Jamaluddin, Hishamuddin and Mansor, Shuhaimi and Faris, Waleed Fekry (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). pp. 59-71. ISSN 1745-6444 (O), 1745-6436 (P)

Rashid, Muhammad Mahbubur and Hussain, Mohamed Azlan and Abd Rahim, Nasrudin and Salami, Momoh Jimoh Emiyoka (2009) Development of fuzzy logic controller for magnetorheological rotary brake system. International Journal of Mechanical and Materials Engineering (IJMME), 4 (3). pp. 232-238. ISSN 1823-0334

Rashid, Muhammad Mahbubur and Salami, Momoh Jimoh Emiyoka and Khan, Md. Raisuddin and Rahman, Md. Mozasser (2011) Development of vibration suppression devices from smart fluids. Advanced Materials Research, 264-65. 548 -553 . ISSN 1022-6680

Rehman, Fazal ur and Khan, Qudrat and Akmeliawati, Rini (2019) Synchronization and antisynchronization protocol design of chaotic nonlinear gyros: an adaptive integral sliding mode approach. Turkish Journal of Electrical Engineering & Computer Sciences, 27 (1). pp. 675-684. ISSN 1300-0632 E-ISSN 1303-6203

Seprianto, Dicky and ., Iskandar and R., Wilza and Adesta, Erry Yulian Triblas (2019) Influence of internal fill pattern, polishing time and Z-Axis orientation on the tensile strength of the 3D printed part. International Journal of Recent Technology and Engineering, 7 (6). pp. 170-174. ISSN 2277-3878

Shah, Qasim Hussain and Abakrb, Yousif A. (2007) A comparison of energy absorbing capabilities of paper and steel structures subjected to progressive failure under free falling objects. Journal of Engineering Science and Technology , 2 (2). pp. 200-210. ISSN 1823-4690

Shah, Qasim Hussain and Abdullah, Kassim (2011) Evaluation of friction welded bi-material joint strength subjected to impact loads. Advanced Materials Research, 264. pp. 719-725. ISSN 1662-8985

Shah, Qasim Hussain and Hamdani, Adib (2013) The damage of unconfined granite edge due to the impact of varying stiffness projectiles. International Journal of Impact Engineering, 59. pp. 11-17. ISSN 0734-743X

Shah, Qasim Hussain and Naily, Hanis and Ramly, Nur Syuhada (2012) Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 174-180. ISSN 1755-9766

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ahmad, Meor iqram Meor (2021) Numerical investigation on the damage of whirling engine blades subjected to bird strike impact. Journal of Aeronautics, Astronautics and Aviation, 53 (2). pp. 193-199. ISSN 1990-7710

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Topa, Ameen and Ismail, Ahmad Faris (2022) Numerical modelling of bird strike on a rotating engine blades based on variations of porosity density. IIUM Engineering Journal, 23 (1). pp. 412-423. ISSN 1511-788X E-ISSN 2289-7860

Suhaimi, Nur Shufinah and Ahmad, Meor Iqram Meor and Nuawi, Mohd Zaki and Ariffin, Ahmad Kamal and Jamaludin, Nordin and Abdullah, Nur Azam (2022) A review on modes of failure of rail track structure in railway transportation. ASEAN Journal of Engineering and Technology. pp. 7-18. E-ISSN 2710 - 5741

Syed, Syed Ashfaq and Khan, Sher Afghan (2013) Sonic Under Expanded Flow Control With Micro Jets. International Journal of Engineering Research and Application, 3 (6). pp. 1482-1488. ISSN 2248-9622

Syed, Syed Ashfaq and Khan, Sher Afghan and E., Rathakrishnan (2013) Control of suddenly expanded flow for area ratio 3.61. International Journal of Advanced Scientific and Technical Research (IJAST, 6 (3). pp. 1-11. ISSN 2249-9954

Wahab, Magd Abdel and Hilmy, Irfan and Ashcroft, Ian Anthony and Crocombe, Andrew David (2010) Evaluation of fatigue damage in adhesive bonding: Part 1: Bulk adhesive. Journal of Adhesion Science and Technology, 24 (2). pp. 305-324. ISSN 0169-4243 E-ISSN 1568-5616

Book

Hussain Shah, Qasim and Hasan, Hasan Abid (2012) LS-DYNA for beginners: an insight into Ls-Prepost and Ls-Dyna. LAP LAMBERT Academic Publishing, Saarbrucken Germany. ISBN 9783846556771 / 3846556777

Book Chapter

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor Iqram Meor (2022) LCO flutter instability on oscillating supersonic wing by means of linearized aerodynamic small disturbance theory. In: Structural Integrity Cases in Mechanical and Civil Engineering. Structural Integrity, 23 (2). Springer Nature Switzerland AG, Switzerland, pp. 13-28. ISBN 978-3-030-85645-8

Aibinu, Abiodun Musa and Syed Mohammad, Sharifah Nadiah and Wan Azmi, Wan Nur Faezah (2011) Review of Malaysian traffic summon and payment system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 351-359. ISBN 9789674181765

Azmi, Mohd Hafizi and Affendy, Muhammad R. and Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa (2011) Development of an intelligent laundry system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 194-202. ISBN 9789674181765

Baali, Hamza and Salami, Momoh Jimoh Eyiomika and Akmeliawati, Rini (2011) Kernel PCA – an introduction. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 292-296. ISBN 9789674181765

Rotinwa-Akinbile, M. A. and Aibinu, Abiodun Musa and Salami, Momoh Jimoh Eyiomika (2011) Development of palmprint based biometric system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 203-212. ISBN 9789674181765

Toha, Siti Fauziah and Tokhi, M. Osman (2011) System identification technique for a helicopter using genetic algorithms. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 304-310. ISBN 9789674181765

Toha, Siti Fauziah and Tokhi, M. Osman (2011) System modelling of a twin rotor system: time and frequency domain analysis. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 297-303. ISBN 9789674181765

Proceeding Paper

Abdullah, Nur Azam (2021) Pembangunan teknologi aeroangkasa bagi pertahanan nasional. In: Webinar Aviation, Aero Space and Space Awareness, Virtual. (Unpublished)

Abdullah, Nur Azam (2021) Penggubalan polisi: merangka kapasiti pertahanan negara masa hadapan. In: Bengkel Merangka Kapasiti Pertahanan Negara Masa Hadapan: Pembangunan Rangka Tindakan Kapasiti Pertahanan (RTKP) - Kertas Putih Pertahanan (KPP), 4 May 2021, Hotel InterContinental, Kuala Lumpur. (Unpublished)

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman (2021) Aerodynamic assessment and development of Smokey SAM Prototype (TRL-6). In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor iqram Meor (2021) Limit Cycle Oscillation (LCO) flutter of advanced high modulus graphite/epoxy composite oscillating supersonic wing. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 8 - 9 March 2021, Pulau Pinang.

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor iqram (2021) Computational modelling of bird strike impact on an aluminium alloy plate via coupling of FE-SPH. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 08-09 Mar 2021, Online.

Ali , Mohammad Yeakub and Abd. Rahman, Mohamed and Banu, Asfana and Adnan, Shakira and Nadia, Fatin (2016) High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014), 23rd-25th Nov. 2014, Cameron Highland, Pahang.

Curiel-Sosa, J.L. and Tafazzolimoghaddam, Behrooz and Navarro-Zafra, Joaquin and Akbar, Mahesa and Abdullah, Nur Azam and Ahmad, Meor iqram Meor (2017) Modelling techniques for delamination and fracture of composites. In: 7th International Conference on Mechanics and Materials in Design,, 11th-15th June 2017, Albufeira, Portugal.

Djemana, Mohamed and Benyoucef, Rania and Hrairi, Meftah (2022) Detection of unbalance and looseness faults in a ventilation turbine using vibration signature analysis. In: ICMAAE-2021, Kuala Lumpur, Malaysia.

Djemana, Mohamed and Benyoucef, Rania and Hrairi, Meftah (2021) Numerical modelling and applied simulation for the vibration monitoring of a ventilation turbine. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), Kuala Lumpur, Malaysia. (Unpublished)

Goher, Khalid and Ahmad, Salmiah and Tokhi, M. Osman (2010) A new configuration of two wheeled vehicles: towards a more workspace and motion flexibility. In: 2010 4th Annual IEEE Systems Conference, 5-8 Apr., 2010, San Diego, CA, USA.

Hanouf, Zahir (2011) Modal analysis of car panels using finite element analysis. In: Regional Engineering Postgraduate Conference (EPC 2011), 4th-5th October 2011, Bangi, Selangor.

Hanouf, Zahir and Mohd. Nor, Mohd. Jailani and Faris, Waleed Fekry (2007) Engine noise: An overview on current research trends. In: Conference on Advances in Noise, Vibration and Comfort (NVC) 2007, 27th-28th November 2007, Putra Jaya , Malaysia.

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Samsul Bahrim, Nur’atiyah Najwa and Aini Nurrasyidah, Azhar and Mohd Shahar, Siti Fatimah (2014) Development of design structure matrix of product architecture case study: multi purpose CNC router. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Husin, Hafiz and Mat Nawi, Mohd Nazir and Gebremariam, M. A. and Azhari, Azmir (2021) Investigation on the use of mask in waterjet surface texturing of stainless steel. In: Innovative Manufacturing, Mechatronics & Materials Forum 2020 (iM3F 2020), 6th August 2020, Online, Pekan, Pahang, Malaysia.

Islam, Md. Rafiqul and Rashid, Muhammad Mahbubur (2023) Permission-based blockchain consortium network (PBCN) uses for cross-border payment. In: 2023 IEEE Symposium on Wireless Technology & Applications (ISWTA 2023), Hybrid Conference in Maya Hotel, Kuala Lumpur, Malaysia.

Nasry, Nasrul Ashraf and Mahmud, Khairus Syakirah and Hilmy, Irfan and M. I., Ismail and Hassan Basri, Rodziah (2017) Implementation of lean manufacturing to blend with good manufacturing practice at Minda Tulus Industries Sdn. Bhd. for improved performance. In: 3rd National Conference on Knowledge Transfer (NCKT'16), 30th Nov.-1st Dec. 2016, Pulau Pinang.

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 3rd International Conference on Green Engineering & Technology 2021 (IConGETech), 4th February 2021, Virtual conference. (Unpublished)

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 1st International Conference on Material Processing and Technology (ICMProTech 2021), Virtual.

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration, 4-6 January 2009, Cairo, Egypt.

Ramlee, Mohd Rais Hakim and Md. Yusof, Hazlina (2017) Design and development of gripping assistive device for post — Stroke rehabilitation. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017, 28th-30th November 2017, Putrajaya.

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Sailan, Saeed (2023) Service robot using voice recognition. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei (Virtual).

Samewoi, Abdul Rahman and Zainul Azlan, Norsinnira (2019) Kinematics analysis and trajectory validation of two cooperative manipulators handling a flexible beam. In: 7th International Conference on Mechatronics Engineering, ICOM 2019, 30 - 31 Oct 2019, Putrajaya.

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ahmad, Meor iqram Meor (2020) Damage assessment on numerical modelling of rotating engine blades subjected to bird strike. In: International Symposium on Sustainable Aviation (ISSA 2020), 9th-11th November 2020, Serdang, Selangor. (Unpublished)

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ismail, Ahmad Faris (2021) Numerical Modelling of Bird Strike on a Rotating Engine Blade Based on Variations of Porosity Density. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Suhaimi, Nur Shufinah and Ahmad, Meor Iqram Meor and Nuawi, Mohd Zaki and Ariffin, Ahmad Kamal and Abdullah, Nur Azam (2021) A review on modes of failure of rail tracks in railway transportation. In: 2nd Virtual Conference on Computational and Experimental Mechanics (VCCEM 21), 1-2 December 2021, Virtual Platform.

Talikoti, Mohammed Aqeel and Kittur, Md Ibrahim and Reddy, Avala Raji and Baig, Maughal Ahmed Al and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Influence of high and subsequent low-temperature artificial aging on exfoliation corrosion of AA2024. In: International Conference on Technology Innovation in Mechanical Engineering, TIME 2021, 22-23 April 2021, Virtual.

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Nithe, N. A. and Rony, J. I. (2016) Performance and cost analysis of diesel engine with different mixing ratio of raw vegetable oil and diesel fuel. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Wahab, M. Abdel and Hilmy, Irfan and Hafiz, Tauqeer and Talemi, R. Hojjati (2012) Finite element modelling of damage fracture and fretting fatigue. In: 15th International Conference on Applied Mechanics & Mechanical Engineering, 29-31 May 2012, Cairo, Egypt.

Monograph

Kashif, Syed Muhammad (2012) Hot Water Rocket System (HWRS) - preliminary design and prototype development of a pressurized how water casing (PHWC). Research Report. s.n, Kuala Lumpur. (Unpublished)

Mridha, Shahjahan (2012) Effect of cryogenic cooling on the micro structure and properties of ferritic stainless steel welds. Research Report. s.n. (Unpublished)

Patent

Tahoun, Ahmed and Kafafy, Raed and Jawamir, Karam and Mohammed Aldheeb, Mohammed Abdulmalek and Khalil, Abdul Mushawwir (2016) Method and apparatus for remotely changing flow profile in conduit and drilling bit. US9309726B2.