IIUM Repository

Items where Division is "Kulliyyah of Engineering" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | W | Y | Z
Number of items: 635.

A

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi (2018) The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 -9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Aabid, Abdul and Hrairi, Meftah and Mohamed Ali, Jaffar Syed and Abuzaid, Ahmed (2018) Stress concentration analysis of a composite patch on a hole in an isotropic plate. International Journal of Mechanical and Production Engineering Research and Development, 2018 (Special Issue). pp. 249-255. ISSN 2249-6890 E-ISSN 2249-8001

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Modeling different repair configurations of an aluminum plate with a hole. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2018) Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development, Special issue. pp. 238-243. ISSN 2249-6890 E-ISSN 2249-8001

Aabid, Abdul and Khan, Sher Afghan (2018) Design and fabrication of flying saucer utilizing coanda effect. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Aabid, Abdul and Khan, Sher Afghan (2018) Optimization of heat transfer on thermal barrier coated gas turbine blade. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 -22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Ab Aziz Al Safi, Nur Amalin and Yusof, Faridah (2018) Immobilization of CLEA-Lipase of Hevea brasiliensis onto magnetic nanoparticles for enhanced biocatalytic performance. In: The 5th International Conference of Biotechnology Engineering 2018, 19th-20th September 2020, Kuala Lumpur.

Ab Mutalib, Nurul Asyikeen and Jaswir, Irwandi and Akmeliawati, Rini and Latief, Marsad and Octavianti, Fitri and Alkahthani, Hassan (2018) Optimization of lard compound analysis using portable electronic nose based upon response surface methodology. Malaysian Journal of Consumer and Family Economics, 21 (2). pp. 124-131. ISSN 1511-2802

Ab Rahim, Abdul Hakim and Ramli, Nabilah and Nordin, Anis Nurashikin (2018) Fabrication and characterization of supercapacitor with activated carbon electrode and NaOH electrolyte. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Gombak, Kuala Lumpur.

Ab Rahim, Abdul Hakim and Ramli, Nabilah and Nordin, Anis Nurashikin and Othman, Raihan and Asrar, Waqar and Sulaeman, Erwin (2018) Classical equivalent circuit characterization for a double-layer capacitor. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017, 28th-30th November 2017, Putrajaya.

Ab Rahim, Rosminazuin and Awad, Abdallah M. A. and Hassan Abdalla Hashim, Aisha and Md Ralib, Aliza Aini (2018) Evaluation of the W-metric routing Uuing RPL protocol in LLNS. IIUM Engineering Journal, 19 (2). pp. 80-89. ISSN 1511-788X E-ISSN 2289-7860

Ab Tahir, Aliff and Nik Wan Zainun, Wan Hairilamei and Sukindar, Nor Aiman (2018) Kajian kesan suhu terhadap proses pengeringan halwa terung asam dengan menggunakan ketuhar perolakan. In: 3rd National Research and Innovation Conference (NRICon2018), 19th September 2018, Kuching, Sarawak.

Abd Rahman, Faridah and Othman, Mohd Fauzi and Hamzah, Mohd Ilham Rusydan Hamzah (2018) Comparison on performance of adaptive algorithms for eye blinks removal in electroencephalogram. In: International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Abd Samad, Nadiah Syuhada and Amid, Azura (2018) Isolation of halophilic bacteria. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 13-22. ISBN 978-981-13-2256-3

Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Hassan, Noor Azlina and Mohd Apandi, Siti Nur E'zzati and Ali, Fathilah and Manshhor, Mohd Romainor (2018) Thermal stability of plasticized durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 447-451. ISSN 2581-4311

AbdErahman, Amani and Abayomi, Olalere Olusegun and Ahmed, AbdElhafz Eltahir and Nour, Abdurahman Hamid and Mohd Yunus, Rosli and Mohamed Ibrahim, Ghada and Ahmed Kabbashi, Nassereldeen (2018) Comparative analysis of polyphenolic and antioxidant constituents in dried seedlings and seedless Acacia nilotica fruits. Journal of Analysis and Testing, 2 (4). pp. 352-355. ISSN 2096-241X E-ISSN 2509-4696

Abdel-Rahim, Mohammed and Habaebi, Mohamed Hadi and Chebil, Jalel and Hassan Abdalla Hashim, Aisha and Ahmed, Musse Mohamud and Islam, Md. Rafiqul and Zyoud, Alhareth (2018) An indoor path loss model for wireless sensor networks. International Journal of Ultra Wideband Communications and Systems, 3 (4). pp. 192-200. ISSN 1758-728X E-ISSN 1758-7298

Abdelrahman, Maha A. A and Ahmad Yassin, Atif Abdul Mun'im and Hussein, Ismail Hassan and Mirghani, Mohamed Elwathig Saeed and Abdullah, Babiker Karamah (2018) Esterification of high free fatty acid jatropha curcas oil for biodiesel production = أسترة زيت الجاتروفا كركاس علي الأحماضي الدهنية الحرة لإنتاج الوقود الحيوي. Gezira Journal of Engineering & Applied Sciences, 13 (1). pp. 40-50. ISSN 1858-5698

Abdillah, Muhamad Arif and Abd Latif, Mohd Arif Hafizi and Adnan, Ammar and Mat Hasan, Mohd Raziff and Sidek, Atiah Abdullah and Abdul Hamid, Abd. Malek (2018) Kansei evaluation of universal series bus (USB) charging cable designs. Human Factors and Ergonomics Journal, 3 (1). pp. 39-43. E-ISSN 2590-3750

Abdo Khaled, Nashwan and Abdulghafor, Rawad Abdulkhaleq Abdulmolla and Al-Aghbari, Mohammed and Chamie, Marhaf and Zaid, Mohammed and UNSPECIFIED and UNSPECIFIED (2018) Developing Qaf Online System for Quranic contests. In: 6th International Conference on Islamic Applications in Computer Science and Technology, 20-23 Dec 2018, Malaysia, Quranic Research Center, UM. (Unpublished)

Abdul Aziz, Mohammad and Halim, Zahurin and Othman, Maizatulnisa (2018) Effect of different concentration of sodium hydroxide [NaOH] of sodium hydroxide [NaOH] on Kenaf sandwich structures. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Abdul Aziz, Nor Nadirah and Mohd Mustafah, Yasir and Azman, Amelia Wong and Shafie, Amir Akramin and Yusoff, Muhammad Izad and Zainuddin, Nor Afiqah and Rashidan, Mohammad Ariff (2018) Features-based moving objects tracking for smart video surveillances: A review. International Journal on Artificial Intelligence Tools, 27 (2). ISSN 0218-2130

Abdul Hamid, Ahmad Hussein and Mahmud, Jamaluddin and Noh, Mohd Hafiz and Mohammed Sapardi, Mohd Azan (2018) Wake modifications in confined flows due to the presence of a downstream cylinder in staggered arrangement. International Journal of Engineering and Technology(UAE), 7 (4). pp. 132-136. ISSN 2227-524X

Abdul Malek, Norun and Ali, Khamis and Jusoh, Ahmad Zamani and Mohamad, Sarah Yasmin and Zainal Abidin, Zuhairiah and Asnawi, Ani Liza (2018) Beamforming capability of a cross-slotted ring patch antenna array at 2.4 GHz wireless applications. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Abdul Malek, Norun and Muhamad Mokhtar, Nur Hamizah and Ali, Khamis and Mohd. Isa, Farah Nadia and Abdul Rahman, Farah Diyana (2018) Design of small antennas for 400 MHz applications. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Abdul Malik, Noreha and Wahid, Zaharah and Ibrahim, Siti Noorjannah and Gunawan, Teddy Surya (2018) Investigation of lower limb's muscle activity during performance of solat between two groups. In: 4th International Conference on Electronic Design(ICED 2018), 9th-10th August 2018, Melaka. (Unpublished)

Abdul Muin, Mohd Fahmi and Za'bah, Nor Farahidah (2018) Smart steering auto alert system. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Abdul Rahman, Farah Diyana and Agrafiotis, Dimitris and Ibrahim, Ahmad Imran (2018) Reduced-reference video quality metric based on edge information. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, Putrajaya.

Abdul Rahman, Farah Diyana and Ibrahim, Ahmad Imran and Agrafiotis, Dimitris (2018) Reduced-reference video quality metric using spatio-temporal activity information. Telkomnika, 16 (2). pp. 909-914. ISSN 1693-6930 E-ISSN 2087-278X

Abdul Rahman, Nur Salihah and Al Hazza, Muataz Hazza Faizi and Kays, Emrul (2018) Minimizing makespan of multimachine production system in flow shop environment by means of mixed integer programming model. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1101-1110. ISSN 0976-6340 E-ISSN 0976-6359

Abdul Razak, Rajabi and Othman, Raihan (2018) 19th Century Malay manuscripts and royal Malay letters: identification of writing ink and its characteristics. In: 7th International Seminar On Nusantara Heritage 2018 (7th ISoNH 2018), 23rd Oct. 2018, Kota Bharu, Kelantan.

Abdul Rhman Salim, Omar and Olanrewaju, Rashidah Funke and Balogun, Wasiu Adebayo (2018) Class attendance management system using face recognition. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur, Malaysia.

Abdullah, Abdullah Irfan and Ismail, Ahmad Fadzil and Badron, Khairayu and Hashim, Wahidah (2018) Fade margin estimations for Malaysian armed forces military X-band satellite communication links. International Journal of Future Generation Communication and Networking, 11 (3). pp. 1-9. ISSN 2233-7857

Abdullah, Abu and Hassan, Norita and Hassan, Noor Azlina and Sulong, Abu Bakar and Mas'Ood, Najlaa Nazihah (2018) Preparation of SS316L MIM feedstock with biopolymer as a binder. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Abdullah, Aida Ashikin and Hassan, Norita and Hassan, Noor Azlina (2018) Influence of epoxidized palm oil on polyhydroxyalkanoates tensile properties. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 556-559. ISSN 2581-4311

Abdullah, Aziera and Yusoff, Siti Hajar and Zaini, Syasya Azra and Midi, Nur Shahida and Mohamad, Sarah Yasmin (2018) Smart street light using intensity controller. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Abdullah, Muhammad and Rossiter, John Anthony (2018) Alternative method for predictive functional control to handle an integrating process. In: 2018 UKACC 12th International Conference on Control (CONTROL), 5th-7th September 2018, Sheffield, United KIngdom.

Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Akbar, Mahesa (2018) Aeroelastic assessment of cracked composite plate by means of fully coupled finite element and Doublet Lattice Method. Composite Structures, 202 (SI:Ian Marshall). pp. 151-161. ISSN 0263-8223

Abdullah Din, Ummi Nur Kamilah and Yusoff, Siti Hajar and Midi, Nur Shahida and Khan, Sheroz (2018) Analysis on smart waste management in Malaysia. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018, 20th-21st March 2018, Kuala Lumpur. (Unpublished)

Abdullahi, Salami Ifedabo and Habaebi, Mohamed Hadi and Abdul Malik, Noreha (2018) Flood disaster warning system on the go. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Abdullahi, Salami Ifedapo and Habaebi, Mohamed Hadi and Abdul Malik, Noreha (2018) Capacitive electrode sensor: design and testing. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Abidi, M.Ebrahim and Asnawi, Ani Liza and Mohamed Azmin, Nor Fadhillah and Jusoh, Ahmad Zamani and Ibrahim, Siti Noorjannah and Mohd Ramli, Huda Adibah and Abdul Malek, Norun (2018) Development of voice control and home security for smart home automation. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Aboadla, Ezzidin Hassan E. and Khan, Sheroz and Habaebi, Mohamed Hadi and Gunawan, Teddy and Hamida, Belal Ahmed and Yaacob, Mashkuri and Aboadla, Ali (2018) Comparison of selective harmonic elimination and SPWM techniques for unipolar inverters. International Journal of Engineering & Technology, 7 (4). pp. 6626-6630. ISSN 2227-524X

Abu Bakar, Ayu Haslija and Yin, Shin Koay and Chuah Abdullah, Luqman and Choong, Thomas S Y and Alkhatib, Ma'an Fahmi Rashid and Mobarekeh, Mohsen Nourouzi and Mohd Zahri, Nur Amirah and Yern, Chee Chin (2018) Fluoride removal by Palm Kernel Shell Activated Carbon (PKSAC): batch and isotherms approach. In: The 4th International Conference on Chemical Engineering and Industrial Biotechnology 2018 (ICCEIB 2018), 1st-2nd August 2018, Kuala Lumpur. (Unpublished)

Aburigal, Yasmin Adam Ali and Elmogtaba, Elfadl Y. and Mirghani, Mohamed Elwathig Saeed and Sirible, Awatif A. M. and Hamza, Nada and Hussein, Ismail Hassan (2018) Effect of plant ontogeny on yield and chemical constituents of essential oil in Sweet basil (Ocimum basilicum L.) grown in Sudan. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Evaluating the reduction of stress intensity factor in center-cracked plates using piezoelectric actuators. Actuators, 7 (2). pp. 1-13. ISSN 2076-0825

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Experimental and numerical analysis of piezoelectric active repair of edge-cracked plate. Journal of Intelligent Material Systems and Structures, 29 (18). pp. 3656-3666. ISSN 1045-389X E-ISSN 1530-8138

Adam, Ismail and Kadir, Kushsairy Abdul and Khan, Sheroz and Nordin, Anis Nurashikin and Mansor, Hasmah (2018) Inductive resonant power transfer and topology consideration. In: 3rd IEEE International Conference on Engineering Technologies and Social Sciences, ICETSS 2017, 7th-8th August 2017, Bangkok, Thailand.

Adam, Ismail and Khan, Sheroz and Zaharudin, Zarimin and Abdul Kader, Kushsairy and Abdul Rahman, Farah Diyana and Nordin, Anis Nurashikin and Che Musa, Nurul Arfah and Yaacob, Mashkuri (2018) Frequency reliant wireless power transfer link for a applications of mWatts devices. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Adesta, Erry Yulian Triblas and Avicenna, Avicenna and Hilmy, Irfan and Che Daud, Mohd Radzi (2018) Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Adesta, Erry Yulian Triblas and Hamidon, R. and Riza, Muhammad and Alrashidi, R. F.F.A. (2018) Investigation of tool engagement and cutting performance in machining a pocket. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) Total productive maintenance (TPM) implementation based on lean manufacturing tools in Indonesian manufacturing industries. International Journal of Engineering & Technology, 7 (37). pp. 156-159. ISSN 2227-524X

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) The evaluation of lean manufacturing implementation and their impact to manufacturing performance. In: 1st International Conference on Design, Engineering and Computer Sciences 2018, ICDECS 2018, 9th August 2018, Jakarta, Indonesia.

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung and Agusman, Delvis (2018) Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida (2018) Preparation and characterization of PLA/algae nanocomposite for packaging industry. Journal of Advanced Research in Materials Science, 50 (1). pp. 19-25. ISSN 2289-7992

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida (2018) Preparation and characterization of PLA/algae nanocomposites for packaging industry. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Adnan, Ammar and H., Hanafi and Radin Umar, Radin Zaid and S., Samuel and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek and Ani, Mohd Hanafi (2018) Effect of hatched marking length on entering position among motorcyclists during merging in expressway. Science Intaernational (Lahore), 30 (3 (May-June)). pp. 451-454. ISSN ISSN 1013-5316

Adnan, Noor Hidayah Muhamad and Islam, Md. Rafiqul and Alam, A. H. M. Zahirul (2018) Effects of inter-element spacing and number of elements on planar array antenna characteristics. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 230-240. ISSN 2502-4752 E-ISSN 2502-4760

Ahamad, Nurul Nazihah and Mohamad, Sarah Yasmin and Midi, Nur Shahida and Yusoff, Siti Hajar and Abd Rahman, Faridah (2018) Discrimination of residual and recyclable household waste for automatic waste separation system. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Ahmad, Abdul Aziz and Mohd. Salleh, Hamzah and Noorbatcha, Ibrahim Ali (2018) Site-directed mutagenesis on plasmid using polymerase chain reaction. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 1-12. ISBN 978-981-13-2256-3

Ahmad, Kartini and Abdul Halim, Syafrina and Hanouf, Zahir (2018) Variable viscosity of Casson fluid flow over a stretching sheet in porous media with Newtonian heating. Journal of Informatics and Mathematical Sciences, 10 (1 & 2). pp. 359-370. ISSN 0974-875X E-ISSN 0974-875X

Ahmad, Mani Malam and Mohd Azoddein, Abd. Aziz and Jami, Mohammed Saedi (2018) Eco-friendly Industrial wastewater treatment: Potential of mesophilic bacterium, Pseudomonas putida (ATCC 49128) for hydrogen sulfide oxidation. Journal of Applied Biology & Biotechnology, 6 (3 (May-June)). pp. 53-57. ISSN 2455-7005 E-ISSN 2347-212X

Ahmad, Mani Malam and Mohd Azoddein, Abd. Aziz and Jami, Mohammed Saedi (2018) Factorial analysis of growth parameters for mesophilic bacterium , Pseudomonas putida (ATCC 49128). Biological And Natural Resources Engineering Journal, 01 (01). pp. 50-57. E-ISSN 2637-0719

Ahmad, Mani Malam and Mohd Azoddien, Abd. Aziz and Mohd Zahari, Mior Ahmad Khusairi and Abu Seman, Mazrul Nizam and Jami, Mohammed Saedi (2018) Statistical optimization of Pseudomonas putida (ATCC 49128) growth: Process variables response in hypoxic shake flasks using response surface methodology. International Journal of Bio-Science and Bio-Technology, 10 (3). pp. 1-14. ISSN 2233-7849 E-ISSN 2208-9810

Ahmad, Meor iqram Meor and Curiel-Sosa, J.L. and Akbar, Mahesa L. and Abdullah, Nur Azam (2018) Numerical inspection based on Quasi-Static Analysis using Rousselier Damage Model for aluminium wingbox aircraft structure. Journal of Physics: Conference Series, 1106 (1). pp. 1-12. ISSN 1742-6588 E-ISSN 1742-6596

Ahmad, Nurjehan Ezzatul and Mel, Maizirwan and Sinaga, Nazaruddin (2018) Design of liquefaction process of biogas using Aspen HYSYS simulation. Journal of Advanced Research in Biofuel and Bioenergy, 2 (1). pp. 10-15. E-ISSN 2600-8459

Ahmad, Zuraida and Hermain, Hazwan Yatimi and Abdul Razak, Nur Humairah (2018) Characterizations and biodegradability of solvent casting halloysite nanotubes/sago starch nanocomposite. Journal of Engineering Science and Technology, 13 (Issue Special Issue on WRICET (2016)). pp. 86-93. ISSN 1823-4690

Ahmad, Zuraida and Tajuddin, Maisarah and Salim, Nurul Farhana Fatin and Halim, Zahurin (2018) Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal, 19 (1). pp. 185-196. ISSN 1511-788X E-ISSN 2289-7860

Ahmad, Zuraida and Yahaya, Insyirah and Tajuddin, Maisarah (2018) Morphological and thermal analysis of retted rattan waste fibers. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 403-409. ISSN 2581-4311

Ahmad, Zuraida and Zain, Saidi and Halim, Zahurin and Ismail, Ahmad Faris (2018) Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study. In: Rejuvenating Islamic thought. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 152-166. ISBN 978-967-491-010-5

Ahmad A. Shahrim, Nur’Aishah and Sarifuddin, Norshahida and Ismail, Hanafi (2018) Extraction and characterization of starch from mango seeds. In: Regional Conference on Materials and ASEAN Microscopy Conference 2017, RCM and AMC 2017, 12 - 13 December 2017, Penang; Malaysia.

Ahmad Azhar, Ahmad Zahirani (2018) Konsep perlaksanaan pengasingan kolej kediaman pelajar di Universiti Islam Antarabangsa Malaysia mengikut fakulti. In: Konvensyen Kepengetuaan & Felo Penghuni Kolej-kolej Kediaman Peringkat Kebangsaan 2018, 22nd-23rd July 2018, Bangi. Selangor.

Ahmad Azhar, Ahmad Zahirani and Kahlib, Nor Amyra Zulianey and Manshor, Hanisah and Wee, Sing Yeo and Mohd Ali, Afifah and Rejab, Nik Akmar and Ahmad, Zainal Arifin (2018) Effect of single walled carbon nanotube addition to the physical properties of monolithic alumina. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 585-590. E-ISSN 2581-4311

Ahmad Azhar, Ahmad Zahirani and Manshor, Hanisah and Mohd Ali, Afifah (2018) XRD investigation of the effect of MgO additives on ZTA-TiO2 ceramic composites. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Ahmad Fuad, Fazia Adyani (2018) Characterization of conformational and oligomeric states of proteins. In: Multifaceted protocol in biotechnology. Springer Nature Singapore, pp. 167-178. ISBN 978-981-13-2256-3

Ahmad Fuad, Nursyaza Afida and Nor Azlin, Ahmad Ammar and Zahari, Mohd Faris Danial and Abu Hanifah, Mohd Shahrin (2018) Power distribution loss reduction using Cuckoo search. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur, Malaysia.

Ahmad Nor, Yusilawati and Johari, Farahanim and Kamal Ariffin, Fathin Nadhirah and Mohd Ali, Ainoor Mariana and Khairudin, Nurul Hazah (2018) Antimicrobial applications in agriculture: a review. Journal of Pure and Applied Microbiology, 12 (4). pp. 1829-1838. ISSN 0973-7510 E-ISSN 2581-690X

Ahmad Raus, Raha and Ali Salih, Ghassan and Shaban, Mustaffa Nameer (2018) Culturing and maintaining mammalian cell culture. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 215-226. ISBN 978-981-13-2256-3

Ahmad Rudin, Nurul Syuhada and Mohd. Mustafah, Yasir and Zainal Abidin, Zulkifli and Cho, J. and Mohd Zaki, Hasan Firdaus and Nik Hashim, Nik Nur Wahidah and Abdul Rahman, Hasbullah (2018) Vision-based lane departure warning system. Journal of the Society of Automotive Engineers Malaysia, 2 (2). pp. 166-176. ISSN 2600-8092 E-ISSN 2550-2239

Ahmad Shahrim, Nur’Aishah Ahmad and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Ahmad Azhar, Ahmad Zahirani (2018) The effects of glycerol addition to the mechanical properties of thermoplastic films based on jackfruit seed starch [Kesan penambahan gliserol pada sifat mekanik filem thermoplastik berdasarkan kanji biji nangka]. Malaysian Journal of Analytical Sciences, 22 (5). pp. 892-898. ISSN 1394-2506

Ahmad Zabidi, Suriza and Akter, Sharmin and Zainal Abidin, M. Shahnan (2018) Dimming techniques for visible light communication system. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 258-265. ISSN 2502-4752 E-ISSN 2502-4760

Ahmad Zabidi, Suriza and Akter, Sharmin and Zainal Abidin, Mohd. Shahnan (2018) Preliminary analysis of dimming property for visible light communication. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 28th-30th November 2017, Putrajaya.

Ahmed, Diaa Eldin Mustafa and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Yagoub, Mudathir (2018) Performance evaluation of ad hoc on-demand distance vector routing protocol under video streaming. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Ahmed, Fharrukh and Khan, Sher Afghan (2018) Investigation of efficacy of low length-to-diameter ratio and nozzle pressure ratio on base pressure in an abruptly expanded flow. In: 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, 6 - 7 April 2018, Chennai, Tamilnadu; India.

Ahmed, Kazi Istiaque and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2018) Blood vein detection system for SmartPhone. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Ahmed, Kazi Istiaque and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul and Zainal, Nur Aishah (2018) Enhanced vision based vein detection system. In: 2017 IEEE 4th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November . 2017, Putrajaya, Malaysia.

Ahmed, M. W. and Zainal Abidin, Zulkifli and Mustafah, Yasir Mohd. and Mourshid, S. K. and Abdel Halim, Mahmoud Ahmed and Abdul Rahman, Hasbullah and Sulaiman, S. N. (2018) Design and development of image based lane warning and anti-collision detection system. Journal of Mechanical Engineering, SI (6). pp. 95-105. ISSN 1823-5514 E-ISSN 2550-164X

Ahmed, Moussa Mohamed and Jami, Mohammed Saedi and Salleh, Md Noor and Mirghani, Mohamed Elwathig Saeed (2018) Screening of boron adsorption potential of various date seed preparation methods. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Ahmed Mounis, Shawgi Younis and Zainul Azlan, Norsinnira and Fatai, Sado (2018) Progress based assist-as-needed control strategy for upper-limb rehabilitation. In: 2017 IEEE Conference on Systems, Process and Control, ICSPC 2017, 15 - 16 December 2017, Hatten Square Melaka.

Ajala, M. T. and Khan, Md. Raisuddin and Shafie, Amir Akramin and Salami, Momoh Jimoh Eyiomika and Nor, Mohamad Iskandr and Oladokun, Majeed (2018) Optimization of CO2 production rate for firefighting robot applications using response surface methodology. Cogent Engineering, 5 (1). pp. 1-17.

Ajala, Mosud T. and Khan, Md. Raisuddin and Shafie, Amir Akramin and Salami, Momoh Jimoh Emiyoka and Nor, M. I. Mohamad Nor and Oladokun, M. O. Oladokun (2018) Optimization of CO2 production rate for fire-fighting robot applications using response surface methodology. Cogent Engineering, 5 (1). pp. 1-17. ISSN 2331-1916

Akbar, Muhammad Ali and Rashid, Muhammad Mahbubur and Embong, Abd Halim (2018) Technology based learning system in Internet of Things (IoT) education. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur, Malaysia.

Akbar Tajudin, Hazimah and Al-Khatib, Ma An Fahmi Rashid and Mirghani, Mohamed Elwathig Saeed and Mohd. Salleh, Hamzah and Nasef, Mohamed Mahmoud (2018) Immobilisation of Candida rugosa lipase on aminated polyethylene/polypropylene microfibrous sheet modifieded with oxirane group. ASM Science Journal, 11 (3). pp. 182-200. E-ISSN 1823-6782

Akter, Sharmin and Olanrewaju, Rashidah Funke and Islam, Thouhedul and , Salma (2018) LiFi based automated shopping assistance application in IoT. In: 1st International Conference on Big Data and Cloud Computing (ICoBiC) 2017, 25th–27th November 2017, Kuching, Sarawak, Malaysia.

Al Hazza, Muataz Hazza Faizi and Endut, Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur A B and Ali, Mohammad Yeakub (2018) Statistical analysis of energy absorption in aluminum foam sandwich under impact testing using the Taguchi design. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-6.

Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2018) Numerical analysis of aluminum foam sandwich subjected to compression loading. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Amalina (2018) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Al Kafri, Ala S and Sudirman, Sud and Hussain, Abir Jaafar and Al-Jumeily, Dhiya A. and Fergus, Paul and Natalia, Friska and Meidia, Hira and Afriliana, Nunik and Sophian, Ali and Al-Jumaily, Mohammed and Al-Rashdan, Wasfi and Bashtawi, Mohammad (2018) Segmentation of lumbar spine MRI images for stenosis detection using patch-based pixel classification neural network. In: 2018 IEEE Congress on Evolutionary Computation, CEC 2018, 8 July - 13 July 2018, Rio de Janeiro; Brazil.

Al Mamun, Abdullah and AlSaadi, Mohammed A. and Alam, Md Zahangir and Sopyan, Iis (2018) Carbon nanotubes grown on oil palm shell powdered activated carbon as less hazardous and cheap substrate. Applied Nanoscience (Switzerland), 8 (7). pp. 1767-1779. ISSN 2190-5509 E-ISSN 2190-5517

Al Mamun, Abdullah and Salleh, Md. Noor and Mohamad Noor, Hanapi (2018) Estimation of short‑duration rainfall intensity from daily rainfall values in Klang Valley, Malaysia. Applied Water Science, 8 (7). pp. 1-10. ISSN 2190-5487 E-ISSN 2190-5495

Al-Mamun, Abdullah and Al-Khatib, Ma An Fahmi Rashid and Danial, Rabiatul Adawiyah and Salihu, Aliyu and Alam, Md Zahangir (2018) Reuse potential of carbon nanotubes in removing cadmium from water. Nanoscience & Nanotechnology-Asia, 8 (2). pp. 193-198. ISSN 2210-6812 E-ISSN 2210-6820

Al-Robaian, Abdul Rehman A and Khan, Sher Afghan and Asad Ullah, Mohammed and G. M., Fharrukh Ahmed and Imtiyaz, A (2018) A new approach to low-cost open-typed subsonic compressible flow wind tunnel for academic purpose. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6). pp. 383-394. ISSN 2249-6890 E-ISSN 2249-8001

AlDahoul, Nouar and Htike, Zaw Zaw (2018) Feature fusion H-ELM based learned features and hand-crafted features for human activity recognition. International Journal of Advanced Computer Science and Applications. ISSN 2158-107X E-ISSN 2156-5570 (In Press)

Alam, A. H. M. Zahirul and Islam, Md. Rafiqul and Abdullah, Khaizuran and Osman, Eid and Muhamad Adnan, Noor Hidayah and Mukit, Naimul and Nibir, Rauful (2018) Scalability analysis for designing large-scale antenna array using sub-array. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Alam, Md Moktarul and Islam, Md. Rafiqul and Badron, Khairayu and Abdul Rahman, Farah Diyana and Lwas, Ali Kadhim and Dao, Hassan (2018) Time diversity gain analysis for earth to satellite link based on measured rain rate. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Alam, Md Moktarul and Islam, Md. Rafiqul and Salam, M. A. and Muhammad, Norhafizah (2018) Prediction of rain rate distribution with time delay based on measured 1-min rain intensity data to mitigate fades on satellite link. In: 7th Brunei International Conference on Engineering and Technology 2018, BICET 2018, 12 - 14 November 2018, Bandar Seri Begawan, Brunei Darussalam.

Alam, Md. Zahangir and Fazil, Nurul Alia and Azmi, Azlin Suhaida and Mansor, Mariatul Fadzillah (2018) Optimization of biofilm mediated hydrolytic activity of POME for enhanced biogas production. In: 4th International Conference on Sustainable Development (ICSD) 2018, 11th-15th April 2018, Athens, Greece.

Alara, Oluwaseun Ruth and Abdurahman, Nour Hamid and Abdul Mudalip, Siti Kholijah and Ukaegbu, Chinonso Ishmael and Azhari, Nour Hamid and Kabbashi, Nassereldeen Ahmed (2018) Parametric study of soxhlet extraction of phenolic compounds from vernonia amygdalina leaves. In: National Conference for Postgraduate Research 2018 (NCONPGR 2018), 28th-29th Aug. 2018, Kuantan, Pahang.

Alara, Oluwaseun Ruth and Abdurahman, Nour Hamid and Ukaegbu, Chinonso Ishmael and Azhari, Nour Hamid and Kabbashi, Nassereldeen Ahmed (2018) Metabolic profiling of flavonoids, saponins, alkaloids, and terpenoids in the extract from Vernonia cinerea leaf using LC-Q-TOF-MS. Journal of Liquid Chromatography & Related Technologies. pp. 1-10. ISSN 1082-6076 E-ISSN 520-572X (In Press)

Alara, Oluwaseun Ruth and Abdurahman, Nour Hamid and Ukaegbu, Chinonso Ishmael and Hasan, Zulkafli and Kabbashi, Nassereldeen Ahmed (2018) Dataset on LC-Q-TOF/MS tentative identification of phytochemicals in the extract of Vernonia amygdalina leaf through positive ionization. Data in Brief, 21. pp. 1686-1689. ISSN 2352-3409

Alfergani, Asma and Khalil, Ashraf and Rajab, Zakariya and Zuheir, Mohammad and Asheibi, Ali and Khan, Sheroz (2018) Maximum allowable delay bound estimation using Lambert W function. In: IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT), 20th-21st Dec. 2017, UniversityTehran, Iran.

Alfergani, Asma and Khalil, Ashraf and Rajab, Zakariya and Zuheir, Mohammad and Asheibi, Ali and Khan, Sheroz and Aboadla, Ezzidin Hassan Elmabrouk and Azna, Khairil Azhar and Tohtayong, Majdee (2018) Control of master-slave microgrid based on CAN bus. In: 2017 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies, AEECT 2017, 20 - 21 December 2017, Shahid Rajaee Teacher Training UniversityTehran; Iran.

Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. CFD Letters, 10 (2). pp. 18-27. ISSN 2180-1363

Ali, Fathilah and Anuar, Hazleen and Jamaluddin, Jamarosliza (2018) Structural, thermal, mechanical and rheological properties of polylactic acid/epoxidized soybean oil/organoclay blends. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-8. ISBN 978-0-12-803581-8 (In Press)

Ali, Fathilah and Ismail, Norshafiq (2018) Polymerization methods and characterizations for Poly(Lactic Acid) (PLA) based polymers. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 139-150. ISBN 978-981-13-2256-3

Ali, Maisarah and Mohd Ismail, Kamsiah and Hashim, Khairusy Syakirin Has-Yun and Mohamad Suhaimi, Mohamad Saifulnizam and Mustafa, Muhammad Hadi (2018) Heritage building preservation through building information modelling: reviving cultural values through level of development exploration. Planning Malaysia Journal of the Malaysian Institute of Planners, 16 (2). 62 -72. ISSN 1675-6215 E-ISSN 0128-0945

Ali, Maisarah and Mohd Ismail, Kamsiah and Hashim, Khairusy Syakirin Has-Yun and Mohamad Suhaimi, Mohamad Saifulnizam and Mustafa, Muhammad Hadi (2018) Heritage building preservation through building information modelling: reviving cultural values through level of development exploration. Journal of the Malaysian Institute of Planners, 16 (2). pp. 62-72. ISSN 1675-6215 E-ISSN 0128-0945

Ali, Maisarah and Mohd Ismail, Kamsiah and Hashim, Khairusy Syakirin Has-Yun and Mohamad Suhaimi, Mohamad Saifulnizam and Mustafa, Muhammad Hadi (2018) Historic Building Information Modelling (HBIM) for Malaysian construction industry. Planning Malaysia: Journal of the Malaysian Institute of Planners, 16 (3). pp. 332-343. ISSN 1675-6215 E-ISSN 0128-0945

Ali, Mohammad Yeakub (2018) Dry electrical discharge machining: an environmental friendly machining process. In: 2018 9th International Conference on Manufacturing Science and Technology (ICMST 2018), 11th-13th August 2018, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.

Ali, Mohammad Yeakub and Banu, Asfana and Bakar, Mazilah Abu (2018) Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur.

Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Banu, Asfana and Shaffiq, Muhammad and Abd. Rahman, Mohamed and Konneh, Mohamed and Salehan, Muhammad (2018) Investigation of taper angle in dry micro wire EDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. E-ISSN 2278-0149 (In Press)

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, Asfana and Sabur, Abdus and Debnath, Sujan (2018) Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017), 23rd-25th July 2017, Hong Kong, China.

Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62. E-ISSN 0128-1852

Ali Akhbar, Nur Azmira and Yusoff, Siti Hajar and Abdullah Din, Ummi Nur Kamilah and Midi, Nur Shahida (2018) Energy management in IIUM library considering user behaviour. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018, 20th-21st March 2018, Kuala Lumpur. (Unpublished)

Altalmas, Tareq, M. and Sediono, Wahju and Nik Hashim, Nik Nur Wahidah and Ahmad, Salmiah and Khairuddin, Safiah (2018) Analysis of two adjacent articulation Quranic letters based on MFCC and DTW. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Amanullah Tomal, Abu Naser Mohammad and Saleh, Tanveer and Khan, Md. Raisuddin (2018) Combination of fused deposition modelling with abrasive milling for attaining higher dimensional accuracy and better surface finish. IIUM Engineering Journal, 19 (2). pp. 221-231. ISSN 1511-788X E-ISSN 2289-7860

Amid, Azura and Ab. Shukor, Nurul Aqilah (2018) Thermotolerant bacteria producing fibrinolytic enzyme. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 43-52. ISBN 978-981-13-2256-3

Amode, Jeminat Omotayo and Alam, Md Zahangir and Mirza, Aminul Haq and Mei, Chan Cin and Santos, Jose Hernandez (2018) Synergistic studies on the removal of dyes by waste (Metroxylon sagu) based activated carbon: an optimization study. In: 2018 4th International Conference on Environment and Renewable Energy (ICERE 2018), 25th-27th Feb. 2018, Da Nang, Viet Nam.

Amosa, Mutiu Kolade and Jami, Mohammed Saedi and Majozi, T and Adeniyi, A. D and Aderibigbe, F. A and Abdulkareem, S. A (2018) Specific cake resistance as a vital index for efficient membrane filtration systems. In: 18th International HSE Biennial Conference on the Oil & Gas Industry in Nigeria, 26th–28th November 2018, Lagos, Nigeria.

Andan, Amelda Dianne and Lee, Duck-Joo (2018) Effect of external acoustic excitation on NACA0015 discrete tonal noise. Applied Acoustics, 141. pp. 374-381. E-ISSN 0003-682X

Ani, Mohd Hanafi and Zaharudin, M Z and ., Suryanto and Purwanto, Hadi and Din, M.F.M. and ., T. Kurniawan (2018) Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation. In: 2018 2nd International Conference on Engineering Innovation (ICEI), 5th-6th July 2018, Bangkok, Thailand.

Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Abu Bakar, Nur Fatin Izzati and Syed Mustafa, Sharifah Nurul Inani and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah (2018) Physical and functional properties of durian skin fiber biocomposite films filled with natural antimicrobial agents. BioResources, 13 (4). pp. 7255-7269. ISSN 1930-2126

Anwar, Farhat and Masud, Mosharrof Hussain and Khan, Burhan Ul Islam and Olanrewaju, Rashidah Funke and Abdul Latif, Suhaimi (2018) Analysis of packet reordering delay for bandwidth aggregation in heterogeneous wireless networks. IPASJ International Journal of Information Technology (IIJIT), 6 (7). pp. 9-20. ISSN 2321-5976

Anwar, Farhat and Masud, Mosharrof Hussain and Khan, Burhan Ul Islam and Olanrewaju, Rashidah Funke and Abdul Latif, Suhaimi (2018) Bandwidth allocation policy using the game theory model in heterogeneous wireless networks. IPASJ International Journal of Information Technology (IIJIT), 6 (7). pp. 9-20. ISSN 2321-5976

Anwar, Farhat and Masud, Mosharrof Hussain and Khan, Burhan Ul Islam and Olanrewaju, Rashidah Funke and Abdul Latif, Suhaimi (2018) Game theory for resource allocation in heterogeneous wireless networks - a review. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 843-851. ISSN 2502-4752

Anwar, Farhat and Masud, Mosharrof Hussain and Khan, Burhan Ul Islam and Olanrewaju, Rashidah Funke and Abdul Latif, Suhaimi (2018) Radio Access Technology (RAT) selection mechanism using TOPSIS method in Heterogeneous Wireless Networks (HWN). Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 852-864. ISSN 2502-4752

Ariff, Tasnim Firdaus and Ahmad Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, S.N. and Zahari, S.Z. and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Ariff, Tasnim Firdaus and Mohamed, Nur Maizatul Nasyiin and Binafif, Abdulaziz Abdullah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A.K.M. Nurul (2018) Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718. International Journal of Engineering Research & Technology (IJERT), 7 (10). pp. 244-247. ISSN 2278-0181

Ariff, Tasnim Firdaus and Zolkapli, Farah Farhana and Sapuan, Farah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering. International Journal of Engineering Research and Application, 8 (12 Part I). pp. 51-56. ISSN 2248-9622

Arris, Farrah Aida and Benoudjit, Abdel Mohsen and Sanober, Fahmi and Wan Salim, Wan Wardatul Amani (2018) Characterization of electrochemical transducers for biosensor applications. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 119-138. ISBN 978-981-13-2256-3

Arshad, Atika and Khan, Sheroz and Abdul Kadir, Kushsairy and Tasnim, Rumana (2018) Capacitive sensing algorithm for elderly activity detection scheme indoor environment. Indonesian Journal of Electrical Engineering and Computer Science, 11 (2). pp. 515-521. ISSN 2502-4752

Arshad, Atika and Khan, Sheroz and Alam, A. H. M. Zahirul and Ismail, Ahmad Fadzil and Tasnim, Rumana (2018) Capacitive proximity floor sensing system for elderly tracking and fall detection. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Arshad, Atika and Khan, Sheroz and Tasnim, Rumana (2018) Simple capacitive floor occupancy sensor for determining the pattern of a walking person. In: "4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017", 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar (2018) Active control of base pressure with counter clockwise rotating cylinder at Mach 2. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Counter clockwise rotation of cylinder with variable position to control base flows. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Passive control of base pressure with static cylinder at supersonic flow. In: 1st International Conference on Aerospace and Mechanical Engineering (AeroMech 2017), 21st-22nd Nov. 2017, Pulau Pinang.

Asem, Maimunah and Jimat, Dzun Noraini (2018) Antimicrobial properties of composite film based polyvinyl alcohol/starch/nanocellulose from sugarcane bagasse coated with essential oil. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Asem, Maimunah and Wan Nawawi, Wan Mohd Fazli and Jimat, Dzun Noraini (2018) Evaluation of water absorption of polyvinyl alcohol-starch biocomposite reinforced with sugarcane bagasse nanofibre: Optimization using two-level factorial design. In: Wood and Biofiber International Conference (WOBIC2017), 21st-23rd November 2017, Putrajaya, Malaysia.

Athoillah, Ahdyat Zain and Ahmad, Farah (2018) Lipid production from bioremediation of palm oil mill effluent. In: 5th International Conference Biotechnology Engineering (ICBioE ‘18), 19th-20th September 2018, Kuala Lumpur.

Awale, Raina Jama and Ali, Fathilah and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi and Anuar, Hazleen and Hassan, Azman (2018) Enhanced flexibility of biodegradable polylactic acid/starch blends using epoxidized palm oil as plasticizer. Polymers, 10 (9). pp. 1-12. ISSN 2073-4360

Awang, Nursyahidatul Azwa and Amid, Azura and Jimat, Dzun Noraini (2018) Isolation and identification of bacteria-producing cellulose from tropical fruit for Halal capsule application. In: International Conference on Halal Innovations in Products and Services 2018 (i-CHIPS 2018), 13th -14th July 2018, Songkla, Thailand.

Awang, Nursyahidatul Azwa and Amid, Azura and Mahamad Maifiah, Mohd Hafidz and Jimat, Dzun Noraini (2018) Isolation and identification of bacteria-producing cellulose from tropical fruit for Halal capsule application. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1591-1596. E-ISSN 2088-5334

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19-20 September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Azam, S. M. Kayser and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Hossain, A. K. M. Zakir (2018) A compact bandpass filter using microstrip hairpin resonator for WLAN applications. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Azman, Amelia Wong and Mohd Ariff, Siti and Azman, Muhammad Farhan and Mohd. Ramli, Huda Adibah (2018) Enhancement of electrode design for non-invasive stimulus application. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017, 28th-30th November 2017, Putrajaya.

Azmi, Azlin Suhaida and Che Aziz, Nurain Atikah and Mohamad Puad, Noor Illi and Abdul Halim, Amanatuzzakiah and Yusof, Faridah and Yusup, Suzana (2018) Chlorella vulgaris logistic growth kinetics model in high concentrations of aqueous ammonia. IIUM Engineering Journal, 19 (2). pp. 1-9. ISSN 1511-788X E-ISSN 2289-7860

Azmi, Azlin Suhaida and Shakilla Sani, Fazrizatul and Ali, Fathilah and Mel, Maizirwan (2018) Interactive effect of temperature, pH and light intensity on biodesalination of seawater by Synechococcus sp. PCC 7002 and on the cyanobacteria growth. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (1). pp. 85-93. ISSN 2289-7879

Azmi, H. and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily (2018) Comparison effect of delamination factor (Fd) on unidirectional and woven kenaf fibre reinforced plastic composite materials during milling process [Pembandingan kesan faktor pelekangan (Fd) ke atas bahan komposit plastik bertetulang ekaarah dan bertenun semasa proses pemesinan kisar]. Sains Malaysiana, 47 (4). pp. 829-838. ISSN 0126-6039

Aznan, Khairil Azhar and Khan, Sheroz and Yaacob, Mashkuri and Khalifa, Othman Omran and Aboadla, Ezzidin Hassan Elmabrouk and Tohtayong, Majdee and Khalil, Ashraf and Muhaisen, Naser A.N. and Tan, Nadia Mei Lin (2018) Integrated renewable energy micro-grid for meeting peak hours demand. In: 5th IET International Conference on Clean Energy and Technology, CEAT 2018, 5 - 6 September 2018, University of Malaya Kuala Lumpur. (In Press)

B

Bagum, Mst. Nasima and Konneh, Mohamed and Amin, A. K. M. Nurul (2018) Prediction and experimental validation of temperature rise in ductile mode end milling of soda-lime glass. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3437-3447. ISSN 0268-3768

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Hrairi, Meftah and Ismail, Ahmad Faris (2018) Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation, 3 (4 (September-October)). pp. 160-186. ISSN 2456-1851

Basri, Atikah Balqis and Badron, Khairayu and Ismail, Ahmad Fadzil and Chanik, Abadi and Ismail, Maszlan Yusof and Salim, Hamid (2018) Propagation measurements during Daytime for RazakSAT S-band space to earth satellite signal transmission. International Journal of Future Generation Communication and Networking, 11 (1). pp. 63-72. E-ISSN 2233-7857

Basri, Atikah Balqis and Badron, Khairayu and Ismail, Ahmad Fadzil and Chanik, Abadi and Jamil, S.F. and Salim, Hamid (2018) Determination of correlation coefficients for RazakSAT received signals. International Journal of Future Generation Communication and Networking, 11 (2). pp. 1-10. ISSN 2233-7857 E-ISSN 2207-9645

Bekbaev, Ural (2018) On classification and invariants of second order non-parabolic linear partial differential equations in two variables. In: 25th National Symposium on Mathematical Sciences (SKSM25), 27th-29th August 2017, Kuantan, Pahang.

Ben Belgacem, Farah Fadwa and Mat Isa, Mohd Nor and Abdelrahim, Muhammad Alfatih Muddathir and Tumian, Afidalina and Noorbatcha, Ibrahim Ali and Mohd. Salleh, Hamzah (2018) Next generation sequencing-data analysis for cellulose- and Xylan-degrading enzymes from POME metagenome = Analisis data-penjujukan generasi seterusnya bagi enzim selulosa dan xilan mendegradasi daripada metagenom POME. Sains Malaysiana, 42 (12). pp. 2951-2960. ISSN 0126-6039

Benbelgacem, Farah Fadwa and Mohd. Salleh, Hamzah and Noorbatcha, Ibrahim Ali (2018) Construction of metagenomic DNA libraries and enrichment strategies. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 23-42. ISBN 978-981-13-2256-3

Benmachiche, Abderrahim and Bahloul, Derradji and Mahmoud Ahmed, Gharib Subhi and Messikh Azeddine, Azeddine (2018) Rotation gates with controlled adiabatic evolutions in open systems. Open Systems & Information Dynamics, 25 (3). pp. 1850013-1. ISSN 1230-1612 E-ISSN 1793-7191

Bhuiyan, Sharif Shah Newaj and Khalifa, Othman Omran (2018) Robust automatic multi-camera viewpoint stabilization using Harris laplace corner detection and spanning tree. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Bolad, Tarek Mohamed and Nik Hashim, Nik Nur Wahidah and Mohamad Hanif, Noor Hazrin Hany (2018) Color recognition wearable device using machine learning for visually impaired person. IIUM Engineering Journal, 19 (2). pp. 213-220. ISSN 1511-788X E-ISSN 2289-7860

Bouh, Ibrahim Gamiye and Alam, Md. Zahangir and Kabbashi, Nassereldeen Ahmed (2018) Enhancement of biogas production from sewage sludge by biofilm pretreatment method. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Budalal, Asma. Ali H. and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Abd Rahman, Tharek (2018) Millimeter wave channel modeling – present development and challenges in tropical areas. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Bujang, Mastura and Hainin, Mohd Rosli and Abd Majid, Muhd Zaimi and Mohd Satar, Mohd Khairul Idham and Wan Azahar, Wan Nur Aifa (2018) Assessment framework for pavement material and technology elements in green highway index. Journal of Cleaner Production, 174. pp. 1240-1246. ISSN 0959-6526

C

Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Khan, Sher Afghan (2018) Investigation of base flow for an axisymmetric suddenly expanded nozzle with micro JET. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 236-242. ISSN 2227-524X

Che Mustapha, Nurul Arfah and Alam, A.H.M. Zahirul and Khan, Sheroz and Azman, Amelia Wong (2018) Analysis of the frequency dependency to the single supply differential capacitive sensor. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)

Chowdhury, Md. Sazzad Hossien (2018) Comparing numerical methods for solving Chaotic and Stiff Initial Value Problems (IVPs). In: Kolokium Pusat Penyelidikan Pengkomputeran Matematik, 3rd May 2018, Pagoh, Johor. (Unpublished)

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) An analytical technique to obtain higher-order approximate periods for the nonlinear oscillator. IIUM Engineering Journal, 19 (2). pp. 182-191. ISSN 1511-788X E-ISSN 2289-7860

Chowdhury, Md. Sazzad Hossien and Razali, Nur Isnida and Mt Aznam, Suazlan (2018) Application of homotopy perturbation method for numeric–analytic solution of system of hyperchaotic ODEs. In: 14th World Conference on Applied Science, Engineering and Technology (WCASET-18), 21st-22nd November 2018, Kuala Lumpur, Malaysia.

Chun, Xu and Yan, He and Li, Zhihao and Ahmad Nor, Yusilawati (2018) Nanoengineered hollow mesoporous silica nanoparticles for the delivery of antimicrobial proteins into biofilms. Journal of Materials Chemistry B, 6 (13). pp. 1899-1902. ISSN 2050-7518 E-ISSN 2050-750X

D

Daddiouaissa, Djabir and Amid, Azura and Kabbashi, Nassereldeen Ahmed and Mohd Shaifudin Epandy, Mohamad Adika Khairy (2018) Ionic liquid microwave-assisted extraction of annona muricata fruit. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Daoud, Guerras and Aboadla, Ezzidin Hassan Elmabrouk and Khan, Sheroz and Ahmed, Syed Faiz and Tohtayong, Majdee (2018) Input-series output-parallel full-bridge DC-DC converter for high power applications. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Din, Sami Ud and Khan, Qudrat and Rehman, Fazal ur and Akmeliawati, Rini (2018) A comparative experimental study of robust sliding mode control strategies for underactuated systems. IEEE Access, 6. pp. 1927-1939. ISSN 2169-3536

E

Elgharbawy, Amal A.M. and Alam, Md Zahangir and Moniruzzaman, Muhammad and Kabbashi, Nassereldeen Ahmed and Jamal, Parveen (2018) Chemical and structural changes of pretreated empty fruit bunch (EFB) in ionic liquid-cellulase compatible system for fermentability to bioethanol. 3 Biotech, 8 (5). pp. 1-15. ISSN 2190-572X E-ISSN 2190-5738

Elgharbawy, Amal A.M. and Alam, Md. Zahangir (2018) Factors affecting the hydrolysis of empty fruit bunches in ionic liquid-compatible cellulase system. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Elgharbawy, Amal A.M. and Hayyan, Adeeb and Hayyan, Maan and Rashid, Shahidah Nusailah and Mohd Nor, Mohd Roslan and Zulkifli, Mohd Zamani and Alias, Yatimah and Mirghani, Mohamed Elwathig Saeed (2018) Shedding light on lipase stability in natural deep eutectic solvents. Chemical and Biochemical Engineering Quarterly, 32 (3). pp. 359-370. ISSN 0352-9568 E-ISSN 1846-5153

Elgharbawy, Amal A.M. and Riyadi, Fatimah Azizah and Alam, Md Zahangir and Moniruzzaman, Muhammad (2018) Ionic liquids as a potential solvent for lipase-catalysed reactions: a review. Journal of Molecular Liquids, 251. pp. 150-166. ISSN 0167-7322

Elnour, Ahmed and Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Musa, Khalid Hamid (2018) Antioxidant capacity and characterization of gum arabic crude methanol extract and it is fractions by fourier transform infrared (FTIR) and Raman. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Elnour, Ahmed and Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Musa, Khalid Hamid (2018) Study of antioxidant and anti-inflammatory crude methanol extract and fractions of Acacia seyal gum. American Journal of Pharmacology and Pharmacotherapeutics, 5 (1:3). pp. 1-11. ISSN 2393-8862

Elshaibani, Duaa and Greibea, Sara and Alakeili, Loubna and Hammoda, Ahmed and Tahir, Ahmed and Khalil, Ashraf F. and Hassan, Zakariya and Khan, Sheroz and Ahmed, Syed Faiz and Ali, Athar (2018) Simulation and practical implementation of a SEIG used in wind energy systems with rectified output voltage. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Elsheikh, Elsheikh Mohamed Ahmed and Habaebi, Mohamed Hadi and Mohd Ramli, Huda Adibah and Arafa, Mohammed H. A. and Ahmed, Kazi Istiaque (2018) Maximum-largest weighted delay first algorithm for heterogeneous traffic in 4G networks. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 6 (2). pp. 190-199. ISSN 2089-3272

Elsheikh, Elsheikh Mohamed Ahmed and Habaebi, Mohamed Hadi and Mohd Ramli, Huda Adibah and Arafa, Mohammed H. A. and Ahmed, Kazi Istiaque (2018) A packet scheduling scheme for improving real-time applications performance in downlink LTE–advanced. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 6 (2). pp. 200-209. ISSN 2089-3272

Engku Ibrahim, Engku Haliza (2018) Problem-based learning (PBL) in sociolinguistics as a way of encouraging active learning. In: 2017 Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2017, 6th-7th December 2017, Penang.

Eusuf, Muhammad Abu and Mohit, Mohammad Abdul and Sami Eusuf, Muhammad Mehbub R. and Ibrahim, Mansor (2018) Impact of outdoor environments on the quality of life. Asian Journal of Environment-Behaviour Studies, 3 (10). pp. 36-46. E-ISSN 2514-751X

Eusuf, Muhammad Abu and Salleh, Wira Md. Noor and Mamun, Abdullah Al and M., Adnan and Sabeek Eusuf, M.S.R. and Rahman, Mohammed Ataur and Ibrahim, Mansor (2018) A parametric approach for the study of heat flow between street canyon and the atmosphere. Planning Malaysia: Journal of the Malaysian Institute of Planners, 16 (2). pp. 50-61. ISSN 1675-6215 E-ISSN 0128-0945

Ezzatul Ahmad, Nurjehan and Maizirwan, Mel and Murad, Fatin Nabilah and Ramli, Nur Amalina and Muhamad Sade, Zulaika and Ahmad Zailani, Ima Shahanaz and Rosmadi, Mohd Sharul Amri and Hamzah, Mohd. Salleh (2018) Transformation of carbon dioxide into methanol. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (1). pp. 55-62. E-ISSN 2289-7879

F

Fairuz, Subha and Habaebi, Mohamed Hadi and Elsheikh, Elsheikh Mohamed Ahmed (2018) Finger vein identification based on transfer learning of AlexNet. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Fairuz, Subha and Habaebi, Mohamed Hadi and Elsheikh, Elsheikh Mohamed Ahmed and Chebil, Jalel (2018) Convolutional neural network-based finger vein recognition using near infrared images. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Fajingbesi, Fawwaz Eniola and Midi, Nur Shahida and Yusoff, Siti Hajar and Elsheikh, Elsheikh Mohamed Ahmed (2018) Modeling soil electrical conductivity under impulse discharge for electrical ground system. In: Eighth International Conference On Advances in Computing, Electronics and Electrical Technology - CEET 2018, 3rd-4th February 2018, Kuala Lumpur.

Farag, Mohannad and Zainul Azlan, Norsinnira and Alsibai, Mohammed Hayyan (2018) Development of anthropomorphic robotic hand driven by Pneumatic Artificial muscles for robotic applications. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1 - 2 March 2018, Universiti Malaysia Pahang (UMP) Pekan Campus LibraryPekan, Pahang; Malaysia.

Fargana, A. and Rakhimov, Abdumalik and Khan, Ahsan Ali and Hassan, Torla (2018) Optimization of the regularization of the solution of the plate vibration problem. International Journal of Applied Engineering Research, 13 (8). pp. 6364-6368. E-ISSN 0973-4562

Faris, Waleed Fekry and Bahari, Che Amnah and Mohamad, Mardiana and Abdul Razak, Abdul Latif and Abdul Khaiyom, Jamilah Hanum and Abdullah, Fatimah and Abdullah Zawawi, Nur Afiqah Izzati (2018) Islamic spiritual enhancement module for psychological health - workbook and worksheet. [Copyright] (Unpublished)

Fauzi, Fatin Bazilah and Ismail, Edhuan and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop and Md Din, Muhammad Faiz and Mohd Abid, Mohd Asyadi Azam (2018) A critical review of the effects of fluid dynamics on graphene growth in atmospheric pressure chemical vapor deposition. Journal of Materials Research, 33 (9). pp. 1088-1108. ISSN 0884-2914 E-ISSN 2044-5326

Fauzi, Fatin Bazilah and Ismail, Edhuan and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop and Md Din, Muhammad Faiz and Mohd Abid, Mohd Asyadi Azam (2018) A critical review of the effects of fluid dynamics on graphene growth in atmospheric pressure chemical vapor deposition. Journal of Materials Research, 33 (9). pp. 1088-1108. ISSN 0884-2914 E-ISSN 2044-5326

Fauzli, Farah Nabila and Jameel, Ahmad Tariq (2018) Immobilization of lipase in functionalised potassium carrageenan beads and optimization of the enzyme activity. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Fazil, Nurul Alia and Alam, Md. Zahangir and Mansor, Mariatul Fadzillah and Azmi, Azlin Suhaida (2018) Effect of inoculum ratio for anaerobic digestion of hydrolyzed palm oil mill effluent for biogas production. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Fettane, Amar and Mochammad Sahid, Mualimin (2018) مباحث الجرح والتعديل عند الإمام الزركشي: دراسة تحليلية. HADIS Journal. pp. 1-41. E-ISSN 2550-1585 (In Press)

Fettane, Amar and Mochammad Sahid, Mualimin (2018) جهود الإمام الزركشي في علم التخريج: دراسة تحليلية = The efforts of Imam al-Zarkashi in Takhrij: an analytical study. Wahdatul Ummah Journal, 18. pp. 1-39. ISSN 2348-5051 (In Press)

Fujiwara, Ryoko and Iwasaki, Tomohiro and Jami, Mohammed Saedi and Iwata, Masashi (2018) Analysis of centrifugal deliquoring with cylindrical filter medium. In: European Conference on Fluid-Particle Separation (FPS 2018), 15th-17th October, 2018, Lyon, France. (Unpublished)

Fujiwara, Ryoko and Iwasaki, Tomohiro and Jami, Mohammed Saedi and Iwata, Masashi (2018) Analysis of fractal structure of flocs formed by composite powder flocculant. In: European Conference on Fluid-Particle Separation (FPS 2018), 15th-17th October, 2018, Lyon, France. (Unpublished)

G

G M, Fharukh Ahmed and Al-Robaian, Abdul Rehman A and Aabid, Abdul and Khan, Sher Afghan (2018) Numerical analysis of convergent-divergent nozzle using finite element method. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6). pp. 373-382. ISSN 2249-6890 E-ISSN 2249-8001

Gamawati Adinurani, Praptiningsih and Rahayu, Sri and Sulistiyo Budi, Luluk and Nindita, Anggi and Soni, Peeyush and Mel, Maizirwan (2018) Biomass and sugar content of some varieties of sorghum (Sorghum Bicolor L. Moench) on dry land forest as feedstock bioethanol. In: 3rd International Conference on Electrical Systems, Technology and Information, ICESTI 2017, 26 - 29 September 2017, Mercure Bali HarvestlandDenpasar, Bali; Indonesia.

Ganat, Tarek A. and Hrairi, Meftah (2018) Gas–liquid two-phase upward flow through a vertical pipe: influence of pressure drop on the measurement of fluid flow rate. Energies, 11 (11). pp. 1-23. ISSN 1996-1073

Ganat, Tarek A. and Hrairi, Meftah (2018) A new choke correlation to predict flow rate of artificially flowing wells. Journal of Petroleum Science and Engineering, 171. pp. 1378-1389. ISSN 0920-4105

Ghazali, Aimi S. and Ham, Jaap and Barakova, Emilia I. and Markopoulos, Panos P. (2018) Effects of robot facial characteristics and gender in persuasive human-robot interaction. Frontiers in Robotics and AI, 5. pp. 1-16. ISSN 2296-9144

Gunawan, Teddy Surya and Anuar, Muhammad Hadzir and Kartiwi, Mira and Janin, Zuriati (2018) Development of power factor meter using Arduino. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Gunawan, Teddy Surya and Muhamat Saleh, Nur Atikah and Kartiwi, Mira (2018) Development of quranic reciter identification system using MFCC and GMM classifier. International Journal of Electrical and Computer Engineering, 8 (1). pp. 372-378. ISSN 2088-8708

H

Habaebi, Mohamed Hadi and Al-Haddad, Ahmed and Zyoud, Alhareth and Hijazi, Ghofran (2018) Micro search engine for IoT: an IoT search engine prototype for private networks. Recent Advances in Electrical and Electronic Engineering, 11 (2). pp. 123-131. ISSN 2352-0965

Habib, A K M Ahasan and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Alam, A. H. M. Zahirul (2018) A single LC tank based active voltage balancing circuit for battery management system. IIUM Engineering Journal, 19 (1). pp. 158-167. ISSN 1511-788X E-ISSN 2289-7860

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Mujibur (2018) Antiwashout behavior of calcium phosphate cement incorporated with poly(ethylene glycol). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Mujibur (2018) Effect of poly(ethylene glycol) on the injectability, setting behavior and mechanical properties of calcium phosphate bone cement. IIUM Engineering Journal, 19 (2). pp. 192-202. ISSN 1511-788X E-ISSN 2289-7860

Haddad, Alaa and Hameed, Shihab Ahmed (2018) Image analysis model for skin disease detection: framework. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19 - 20 September 2018, International Islamic University Malaysia (IIUM), Gombak , Kuala Lumpur.

Hafiz, Sabihul and Zaharudin, Zarimin and Khan, Sheroz and Midi, Nur Shahida and Hwang, John Tan Teng and Abdul Kadir, Kushsairy and Shah, Jawad Ali (2018) Exploring resonant configuration topology for inductive link power transfer. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Hafiz, Sabihul and Zaharudin, Zarimin and Khan, Sheroz and Midi, Nur Shahida and Hwang, John Tan Teng and Abdul Kadir, Kushsairy and Shah, Jawad Ali (2018) Resonant configuration topology exploration for inductive link power transfer. Indonesian Journal of Electrical Engineering and Computer Science, 11 (2). pp. 522-530. ISSN 2502-4752

Haider I., Farag and -, Suryanto and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2018) A comparison between destructive and non- destructive techniques in determining coating thickness. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Haiza, Haroon and Yaacob, Iskandar Idris and Ahmad Azhar, Ahmad Zahirani (2018) Thermal conductivity of water based magnetite ferrofluids at different temperature for heat transfer applications. In: International Conference on Sustainable Materials, ICoSM 2018, 16th Apr. 2018, Bangkok, Thailand.

Hajer, Tuhami and Mirghani, Mohamed Elwathig Saeed and Mohamed Elnour, Ahmed Adam and Almain, Abdelrahman Ahmed and Mohammed, Manhal Musa Mohammed (2018) GC- MS analysis, phytochemical screening, antimicrobial and antioxidant activity of Sudanese annona squmosa seeds oil. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Halmi Shari, Ummi Syuhada and Azmi, Azlin Suhaida and Amid, Azura (2018) Chemical mutation method for high CO2- requiring- mutants of the Cyanobacterium Synechococcus sp. PCC 7002. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 53-62. ISBN 978-981-13-2256-3

Hamid, Nur Zamira and Asnawi, Ani Liza and W.Morshidi, W. Hafiy and Ruslan, Ahmad Alhadi and Jundi, Nurul Atiqah and Mohd Ramli, Huda Adibah (2018) Design of a wireless device for monitoring human critical condition at industrial industrial workplace. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Hamida, Belal Ahmed and Hussein, L. A. and Khan, Sheroz and Habaebi, Mohamed Hadi and Zainuddin, Ahmad Anwar and Eltaif, Tawfig and Harun, Sulaiman Wadi (2018) Black phosphorus saturable absorber for pulse generation using Q-switched teachnique. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). pp. 36-40. ISSN 2502-4752 E-ISSN 2502-4760

Hamidah, Hassan and Mamun, Abdullah Al and Alam, Md. Zahangir (2018) Selection of nutrients for the production of Myco-coagulant from Mycelial fungus fermentation. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Hammoda, Ahmed and Buamud, Mohammed S. and Tamasas, Mohamed Elrais and Mohamed, Adel and Khalil, Ashraf F. and Nasr, Mahmoud Shaker and Khan, Sheroz (2018) Experimental verification and simulation of two stages positive output cascade boost converter super-lift DC/DC Luo-converter. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International UniversitySalmabad; Bahrain.

Haneef, I.N.H.M. and Buys, Yose Fachmi and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri and Muhamad Khairussaleh, Nor Khairusshima (2018) Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. In: 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM 2018), 27th-29th November 2018, Penang, Malaysia.

Hannan, Muhammad Abdul and Islam, Naz Niamul and Mohamed, Azah and Lipu, Molla Shahadat Hossain and Ker, Pin Jern and Rashid, Muhammad Mahbubur and Shareef, Hussain (2018) Artificial intelligent based damping controller optimization for the multimachine power system: a review. IEEE Access, 6. pp. 39574-39594. ISSN 2169-3536 E-ISSN 2169-3536

Harun, Azmi and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily and Abdul Rahim, Yuzairi (2018) Machinability study on milling kenaf fiber reinforced plastic composite materials using the design of experiments. In: 3rd International Conference on Science, Technology and Interdisciplinary Research (IC-STAR 2017), 18th-20th Sept. 2017, Bandar Lampung, Indonesia.

Hasbullah, Faried and Faris, Waleed Fekry (2018) Simulation of disturbance rejection control of half-car active suspension system using ADRC with decoupling transformation. In: 4th International Conference on Mathematical Applications in Engineering (ICMAE ’17), 8th-9th Aug. 2017, Kuala Lumpur.

Hashim, Yumi Zuhanis Has-Yun and Ab. Rahman, Erra Fazira and Zainurin, Nur Aimi Aliah and Mohamed Azmin, Nor Fadhillah (2018) Antioxidant activities of agarwood hydrosol. In: International Conference on Halal Innovations in Products and Services 2018 (i-CHIPS 2018), 13th -14th July 2018, Songkla, Thailand.

Hashim, Yumi Zuhanis Has-Yun and Mohd. Salleh, Hamzah and Mohamad Puad, Noor Illi and Ahmad Fuad, Fazia Adyani and Eissa, Manar and Zainurin, Nur Aimi Aliah (2018) Secondary metabolite research in Malaysia: current status and future prospects. In: Secondary metabolites: sources and applications. IntechOpen, London, United Kingdom, pp. 101-111. ISBN 978-1-78923-643-9

Hassan Basri, A.H. and Ibrahim, Siti Noorjannah and Abdul Malik, Noreha and Asnawi, Ani Liza (2018) Integrated surveillance system with mobile application. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Hazmi, Alia Tasnim and Ahmad, Farah and Athoillah, Ahdyat Zain and Jameel, Ahmad Tariq (2018) Preliminary study for lipid extraction from fungi biomass of Aspergillus oryzae. In: 5th International Conference Biotechnology Engineering (ICBioE ‘18), 19th-20th September 2018, Kuala Lumpur.

Hedzir, Anati Syahirah and Sallehuddin, N. N. and Saidin, Norazlina and Hasbullah, Nurul Fadzlin (2018) Influence of electron irradiation on the electroluminescence spectra of white InGaN light emitting diodes. Ukrainian Journal of Physical Optics, 19 (3). pp. 159-164. ISSN 1609-1833 E-ISSN 1816-2002

Herawan, Safarudin Gazali and Talib, Kamarulhelmy and Putra, Azma and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Musthafah, Mohd Tahir (2018) Prediction of generated power from steam turbine waste heat recovery mechanism system on naturally aspirated spark ignition engine using artificial neural network. Soft Computing, 22 (18). pp. 5955-5964. ISSN 1432-7643 E-ISSN 1433-7479

Hong, Jer Lang and Md Jafri, Azmi and Ibrahim, Izihan and Shafie, Suzana and Hong, Kee An and Naubi, Irena (2018) Design rainfall temporal patterns for upper Klang catchment. The Journal of the Institution of Engineers, Malaysia, 79 (1). pp. 21-30. ISSN 0126-513X

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.

Hussain, Sabahat and Khan, Burhan ul Islam and Anwar, Farhat and Olanrewaju, Rashidah Funke (2018) Secure annihilation of out-of-band authorization for online transactions. Indian Journal of Science and Technology, 11 (5). pp. 1-9. ISSN 0974-6846 E-ISSN 0974-5645

Hussin, Khalida and Sidek, Khairul Azami and Ismail, Ahmad Fadzil (2018) Heart abnormality detection using acceleration plethysmogram signal. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 21-24. ISSN 2180-1843 E-ISSN 2289-8131

I

Ibrahim, Siti Noorjannah and Asnawi, Ani Liza and Abdul Malik, Noreha and Mohamed Azmin, Nor Fadhillah and Jusoh, Ahmad Zamani and Mohd. Isa, Farah Nadia (2018) Web based water turbidity monitoring and automated filtration system: IoT application in water management. International Journal of Electrical and Computer Engineering (IJECE), 8 (4). pp. 2503-2511. ISSN 2088-8708

Ibrahim, Siti Noorjannah and Jusoh, Ahmad Zamani and Abdul Malik, Noreha and Asnawi, Ani Liza and Mazalan, S. (2018) Characterization of respiratory conditions using labVIEW and digital spirometer. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 66-73. ISSN 2502-4752 E-ISSN 2502-4760

Ibrahim, Siti Noorjannah and Jusoh, Ahmad Zamani and Malik, N. Abd and Mazalan, S. (2018) Development of portable digital spirometer using NI sbRIO. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Ibrahimy, Muhammad Ibn (2018) Brain computer interface based wheelchair for disable people using electroencephalography signal. International Journal for Studies on Children, Women, Elderly and Disabled People, 3. pp. 191-194. E-ISSN 0128-309X

Ibrahimy, Muhammad Ibn (2018) Fetal heart rate monitoring during pregnancy for assessing the well being of the fetus. International Journal for Studies on Children, Women, Elderly and Disabled People, 3 (1). pp. 195-199. ISSN 0128-309X E-ISSN 0128-309X

Idres, Moumen and Labanie, Mohamed and Okasha, Mohamed Elsayed Aly Abd Elaziz (2018) Transient flow in a compressor blade row for a periodic vibration motion. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Idris, N. F. and Lokman, Muhammad Quisar and Harun, Sulaiman Wadi and Rahim, H. R.A. and Hasbullah, Nurul Fadzlin and Saidin, Norazlina (2018) Influence of growth duration to the Zinc Oxide (ZnO) nanorods on single-mode silica fiber. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-7). pp. 73-77. ISSN 2180-1843 E-ISSN 2289-8131

Imtiaz, Sharjeel and Khatri, Avais and Motan, Imaad Ud Din and Shaikh, Faraz Ahmed and Khan, Sheroz (2018) Finger-worn assistive device for detection tracking and recognition. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Inche Ibrahim, Mohd Lukman (2018) An analytical model for organic solar cells incorporating non-geminate monomolecular and bimolecular recombinations. Semiconductor Science and Technology, 33 (12). ISSN 1361-6641 E-ISSN 0268-1242

Iqbal, Mohammad and Bamatraf, Abdullah Omar Abdullah and Tadjuddin, Muhammad (2018) The study of production performance of water heater manufacturing by using simulation method. In: 2nd International Conference on Nuclear Technologies and Sciences, ICoNETS 2017, 12 -13 October 2017, Makassar; Indonesia.

Ishak, Nor Izzati and Md Yusof, Hazlina and Sidek, Shahrul Naim and Jaalan, Zaleha (2018) Interactive robotic platform for education and language skill rehabilitation. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Islam, M.S. Tajul and Alam, Md. Zahangir and Mamun, Abdullah Al (2018) Optimization of enzymatic pretreatment process for enhanced biogas production from palm oil mill effluent. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Mansor, Hasmah (2018) Trajectory tracking of quaternion based quadrotor using model predictive control. International Journal of Engineering and Technology (UAE), 7 (4.13). pp. 125-128. ISSN 2227-524X

Islam, Md. Rafiqul and Alam, Md Moktarul and Lwas, Ali Kadhim and Mohamad, Sarah (2018) Rain rate distributions for microwave link design based on long term measurement in Malaysia. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 1023-1029. ISSN 2502-4752 E-ISSN 2502-4760

Islam, Md. Rafiqul and Nibir, Rauful and Mukit, Naimul and S. O., Abdinasir and Habaebi, Mohamed Hadi and Mohamad, Sarah Yasmin (2018) Dual band antenna design using stacked series array for Ka-band application. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Islam, Md. Shazzadul and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Hossain, A. K. M. Zakir (2018) A rectangular inset-fed patch antenna with defected ground structure for ISM band. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Islam, Shayla and Hassan Abdalla Hashim, Aisha and Mohd. Isa, Farah Nadia and Hasan, Mohammad Kamrul (2018) Performance evaluation of multi-interfaced fast handoff scheme for PNEMO Environment. Elektronika ir Elektrotechnika, 24 (5). pp. 80-85. ISSN 1392-1215 E-ISSN 2029-5731

Islam, Shayla and Hassan Abdalla Hashim, Aisha and Razzaque, Abdur and Hasan, Muhammad Kamrul (2018) A numerical model to analyze handoff delay and packet loss in PNEMO environment. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Ismail, Ahmad Syakirin and Mamat, Mohamad Hafiz and Malek, Mohd Firdaus and Mohd Yusoff, Marmeezee and Mohamed, Ruziana and Md Sin, Nor Diyana and Abu Bakar, Suriani and Mahmood, Mohamad Rusop (2018) Heterogeneous SnO2/ZnO nanoparticulate film: Facile synthesis and humidity sensing capability. Materials Science in Semiconductor Processing, 81. pp. 127-138. ISSN 1369-8001

Ismail, Azkar Zahidi and Mohd Zamri, Muhamad Zul Asraf and Adnan, Ammar and Mat Hasan, Mohd Raziff and Muhamad Khairussaleh, Nor Khairusshima and Abdul Hamid, Abd. Malek (2018) Kansei evaluation of headscarf (hijab, tudung) designs. Human Factors and Ergonomics Journal, 3 (1). pp. 34-38. E-ISSN 2590-3750

Ismail, Eliza Sabira and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2018) Early concept low cost design of vibration chamber for landslide sensory and alarm system. In: 2017 IEEE 4th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November . 2017, Putrajaya, Malaysia.

Ismail, Nanang and Gunawan, Teddy Surya and Kartika, Santi and Praludi, Teguh and Hamidi, Eki A. Z. (2018) Design of microstrip hairpin bandpass filter for 2.9 GHz – 3.1 GHz s-band radar with defected ground structure. Malaysian Journal of Fundamental and Applied Sciences (MJFAS), 14 (4). pp. 448-455. ISSN 2289-5981 E-ISSN 2289-599X

Ismail, Nanang and Gunawan, Teddy Surya and S, Santi Kartika and Praludi, Teguh and Hamidi, Eki A.Z (2018) Design of microstrip hairpin bandpass filter for 2.9 GHz – 3.1 GHz Sband radar with defected ground structure. Malaysian Journal of Fundamental and Applied Science, 14 (4 (October-December)). pp. 448-455. ISSN 2289-5981 E-ISSN 2289-599X

Ismail, Nanang and Nursalim, Iim and Saputra, Hendri Maja and Gunawan, Teddy Surya (2018) Implementation of fuzzy logic control system on rotary car parking system prototype. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 706-715. ISSN 2502-4752

Ismail, Nur Alya Batrisya and Abd-Wahab, Firdaus and Bader, Mamoun M. and Wan Salim, Wan Wardatul Amani (2018) Electrochemical methods to characterize nanomaterial-based transducers for the development of noninvasive glucose sensors. In: Nanotechnology: applications in energy, drug and food. Springer International Publishing AG, pp. 423-439. ISBN 978-3-319-99601-1

J

J. N., Hasnidawani and Hassan, Noor Azlina and Hassan, Norita and Bonnia, Noor Najmi (2018) Hardness and adhesion performances of nanocoating on carbon steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Jahn Kassim, Puteri Shireen and Ali, Maisarah and Mohd Nawawi, Norwina and Mustafa, Muhammad Hadi (2018) Compositional-cultural evolutions as variations of Malay architectural and constructional vocabulary- a review. In: International Conference on Language, Culture and Society 2018 (2018), 24th-25th Oct. 2018, Kuala Lumpur. (Unpublished)

Jamal, Nur Ayuni and Othman, Maizatulnisa and Anuar, Hazleen and Yusof, Farazila and Ahmad Nor, Yusilawati and Khalid, Khalisanni and Zakaria, Muhamad Nazarudin (2018) Preliminary development of porous aluminum via powder metallurgy technique. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 460-466. ISSN 0933-5137

Jamal, Nur Ayuni Jamal and Yusof, Farazila and Ahmad Nor, Yusilawati and Othman, Maizatulnisa and Khalid, Khalisanni and Zakaria, Muhamad Nazarudin (2018) The role of tin and magnesium in assisting liquid phase sintering of aluminum (Al). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Jameel, Ahmad Tariq and Abdul Jalil, Nur Syuhada (2018) Efficient immobilization of α-naphtyl acetate esterase (ANAE) on modified k-carrageenan, and k-carrageenan/alginate composite matrices – a comparative evaluation. New Biotechnology, 44S. S43. ISSN 1871-6784

Jameel, Ahmad Tariq and Hamza, Mohammad Ameer and Asrar, Waqar (2018) Nonlinear dynamics of heated falling films under the influence of long-range Van Der Walls intermolecular force interactions. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Jameel, Ahmad Tariq and Soropogui, Keamou M. (2018) Purification, characterization and kinetic properties of alpha-naphthyl acetate esterase from wheat flour (Triticum aestivum). New Biotechnology, 44S. S75-S75. ISSN 1871-6784

Jami, Mohammed Saedi and Zakaria, Nur Syahirah and Ahmed, Moussa Mohamed and Ngabura, Mohammed and Ahmad, Mani Malam (2018) Optimization of process parameters for boron adsorption from sea water using Moringa oleifera seeds. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Janin, Zuriati and Sam, Rosida and Masrie, Marianah and Abdul Kadir, Kushsairy and Mohamad Hanif, Noor Hazrin Hany and Gunawan, Teddy Surya (2018) Performance evaluation for SE113 flow control system plant using self-tuning fuzzy PI controller. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th Nov 2018, Songkla, Thailand.

Jarin, Sams and Saleh, Tanveer and Muthalif, Asan G. A. and Ali, Mohammad Yeakub and Bhuiyan, Moinul (2018) Towards achieving nanofinish on silicon (Si) wafer by μ-wire electro-discharge machining. International Journal of Advanced Manufacturing Technology, 99 (9). pp. 3005-3015. ISSN 0268-3768 E-ISSN 1433-3015

Jawed, Bilal and Khalifa, Othman Omran and Bhuiyan, Sharif Shah Newaj (2018) Human gait recognition system. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Jeffree, Amanina Iymia and Omar, Mohammad Iqbal and Hashim, Yumi Zuhanis Has-Yun and Zakaria, Ammar and Thriumani, Reena and Md Shakaff, Ali Yeon (2018) In vitro cancer cell line classification using pattern recognition approach based on metabolite profiling. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). pp. 63-17. ISSN 2180-1843 E-ISSN 2289-8131

Jimat, Dzun Noraini and Avicenna, Avicenna (2018) Isolation of microfibrillated cellulose (MFC) via fungal cellulases hydrolysis combined with ultrasonication. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 109-118. ISBN 978-981-13-2256-3

Jimat, Dzun Noraini and Salleh, Norhidayah and Jami, Mohammed Saedi (2018) Screening of parameters for solid-state fermentation of Aspergillus niger producing cellulose using sugarcane bagasse as substrate. Biological and Natural Resources Engineering Journal, 1 (1). pp. 26-35. E-ISSN 2637-0719

K

Kabbashi, Nassereldeen Ahmed and Hunud, Yara and Alam, Md. Zahangir and Mirghani, Mohamed Elwathig Saeed and Jazzar, Moneef M. (2018) Transesterification process of Moringa oleifera oil to biodiesel. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Kahlib, N. A.Z. and Mohd Daud, Farah Diana and Mel, Maizirwan and Nor Hairin, Assayidatul Laila and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina (2018) Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Kahlib, Nor Amyra Zulianey and Wan Mazlan, Wan Amirah and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina and Nor Hairin, Assayidatul Laila (2018) Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 378-383. ISSN 2581-4311

Karim, Ahasanul and Yousuf, Abu and Islam, Mohammed Amirul and Hashim, Yasir and Faizal, Che Ku Mohammad and Alam, Md Zahangir and Pirozzi, Domenico (2018) Microbial lipid extraction from Lipomyces starkeyi using irreversible electroporation. Biotechnology Progress, 34 (4). pp. 838-845. ISSN 8756-7938 E-ISSN 1520-6033

Karim, Tanzeed and Alam, Md. Zahangir (2018) Development of solid state fermentation for protease enzyme production from the Indah Water Konsortium sludge cake. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Kartiwi, Mira and Gunawan, Teddy Surya and Arundina, Tika and Omar, Mohd. Azmi (2018) Sukuk rating prediction using voting ensemble strategy. International Journal of Electrical and Computer Engineering (IJECE), 8 (1). pp. 299-304. ISSN 2088-8708

Kays, H. M.Emrul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Varela, Leonilde and Putnik, Göran and Machado, Jose (2018) A collaborative multiplicative Holt-Winters forecasting approach with dynamic fuzzy-level component. Applied Sciences (Switzerland), 8 (4). pp. 1-28. ISSN 2076-3417

Khairi, M. Azim and Abd Rahman, Mohamed (2018) Implementing lean in Malaysian universities: Lean awareness level in an engineering faculty of a local university. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Khairudin, Nurul Hafizah and Ahmad Nor, Yusilawati and Hashim, Yumi Zuhanis Has-Yun (2018) Rough hollow mesoporous silica nanoparticles as carrier for agarwood oil to treat cancer cells. In: International Conference Biotechnology Engineering, ICBioE ‘18, 19-20 September, Kuala Lumpur.

Khalil, Ashraf and Yaacob, Mashkuri and Khan, Sheroz and Aboadla, Ezzidin Hassan Elmabrouk and Tohtayong, Majdee and Aznan, Khairil Azhar (2018) On quality energy management in a third world country: the case study of war torn Libya. In: 22nd International Conference on ISO & TQM (22-ICIT), 2nd-4th April 2018, Zhuhai, China. (Unpublished)

Khalili, Amjad and Ismail, Md Yusof and Che Daud, Mohd Radzi (2018) Lean implementation: organizations approach to excellence. Noor Publishing, Mauritius. ISBN 9786202352321

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and UNSPECIFIED (2018) Quality management system and sustainability: a Malaysian perspective. International Journal of Services and Operations Management, 30 (3). pp. 286-317. ISSN 1744-2370 E-ISSN 1744-2389

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N.Mustafizul and Che Daud, Mohd Radzi (2018) Soft total quality management and lean manufacturing initiatives: model development through structural equation modelling. International Journal of Productivity and Quality, 23 (1). pp. 1-30. ISSN 1746-6474 E-ISSN 1746-6482

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Al Hazza, Muataz Hazza Faizi and Norhamzan, Norainnatul Husna (2018) Enhancement of machining performance during electrical discharge machining of stainless steel with carbon nanotube powder added dielectric fluid. International Journal of Applied Engineering Research, 13 (9). pp. 7076-7080. ISSN 0973-4562 E-ISSN 0973-9769

Khan, Ahsan Ali and Muataz Hazza Faizi, Muataz and Mohiuddin, A. K. M. and Abdul Fattah, Nurfatihah and Che Daud, Mohd Radzi (2018) Performance of electrical discharge machining (EDM) with nickel added dielectric fluid. IIUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X E-ISSN 2289-7860

Khan, Ambareen and Abid, Abdul and Khan, Sher Afghan (2018) CFD analysis of convergent-divergent nozzle flow and base pressure control using micro-JETS. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 232-235. ISSN 2227-524X

Khan, Burhan Ul Islam and Olanrewaju, Rashidah Funke and Anwar, Farhat and Najeeb, Athaur Rahman and Mashkuri, Yaacob (2018) A survey on MANETs: architecture, evolution, applications, security issues and solutions. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 832-842. ISSN 2502-4752

Khan, Burhan ul Islam and Olanrewaju, Rashidah Funke and Anwar, Farhat (2018) Rehashing system security solutions in e-banking. International Journal of Engineering & Technology, 7 (4). pp. 4905-4910. E-ISSN 2227-524X

Khan, Burhan ul Islam and Olanrewaju, Rashidah Funke and Anwar, Farhat and Mir, Roohie Naaz and Najeeb, Athaur Rahman (2018) A critical insight into the effectiveness of research methods evolved to secure IoT ecosystem. International Journal of Information and Computer Security. pp. 1-23. ISSN 1744-1765 E-ISSN 1744-1773 (In Press)

Khan, Qudrat and Akmeliawati, Rini (2018) Robust cooperative tracking protocol design for networked higher order nonlinear systems via adaptive second order sliding mode. In: 2017 11th Asian Control Conference (ASCC), 17th-20th Decmber 2017, Gold Coast, Australia.

Khan, Sher Afghan and Abid, Abdul and Baig, Maugal Ahmed Ali (2018) CFD analysis of CD nozzle and effect of nozzle pressure ratio on pressure and velocity for suddenly expanded flows. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1147-1157. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Ali, Mir Owais and Riyadh, Miah Mohammed and Hossen, Zahid and Arefin, Nafis Mahdi (2018) Assessment of different turbulence models in simulating axisymmetric flow in suddenly expanded nozzles. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 243-248. ISSN 2227-524X

Khan, Sher Afghan and Asad Ullah, Mohammed and G M, Fharukh Ahmed and Jalaluddeen, Ahmed and Baig, Maugal Ahmed Ali (2018) Passive control of base drag in compressible subsonic flow using multiple cavity. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4). pp. 39-44. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Asad Ullah, Mohammed and Sadiq, Jafar (2018) Passive control of base drag employing dimple in subsonic suddenly expanded flow. International Journal of Mechanical & Mechatronics Engineering, 18 (3). pp. 69-74. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Asadullah, Mohammad and G.M, Fharukh Ahmed. and Jalaluddeen, Ahmed and Baig, Maughal Ahmed Ali (2018) Flow control with aerospike behind bluff body. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1001-1008. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Chaudhary, Zakir Ilahi and Shinde, Vilas B. (2018) Base pressure control by supersonic micro jets in a suddenly expanded nozzle. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (4). pp. 101-112. ISSN 2077-124X E-ISSN 2227-2771

Khan, Sher Afghan and Riyadh, MiahMohammed and Ibrahim, Mir Owais Ali and Elrashid, Yousof and Arefin, Nafis Mahdi and Kabir, Shahriar and G M, Fharukh Ahmed (2018) Design & development of a gravity powered fan using gear transmission. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 632-637. ISSN 2227-524X

Khan, Talha Ahmed and Alam, Muhammad and Kadir, Kushairy and Shahid, Zeeshan and Mazliham, MS. and Khan, Sheroz and Miqdad, Mohammad (2018) Recognizing foreign Object Debris (FOD): False alarm reduction implementation. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). pp. 41-46. ISSN 2502-4752

Khan, Talha Ahmed and Alam, Muhammad and Kadir, Kushairy and Shahid, Zeeshan and Mohd Su'ud, Mazliham and Khan, Sheroz and Miqdad, Mohammad (2018) Foreign objects debris (FOD) identification: a cost effective investigation of FOD with less false alarm rate. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Khan Chowdhury, Ahmed Jalal and Alifah, F.K. and Nordin, Noor Faizul Hadry and Al-Mamun, Abdullah and Kader, M.A. and Ashraf, Muhammad Aqeel (2018) Diversity and community composition of fishes in the Pusu River Gombak, Malaysia. Journal of Coastal Research, Special Issue 82 Fall. pp. 150-155. ISSN 0749-0208 E-ISSN 1551-5036

Khatun, Hanufa and Yusof, Faridah and Mohamed Azmin, Nor Fadhillah (2018) Optimization of the amino functionalization of magnetic nanoparticles for Use in MNP-CLEA technology. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Khatun, Hanufa and Yusof, Faridah and Mohamed Azmin, Nor Fadhillah (2018) Synthesis and process parameter optimization of immobilizing CLEA-lipase from fish viscera onto magnetic nanoparticles. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Kumar, Deepak and Haja Mohideen, Ahmad Jazlan and Sreeram, Venkatappa (2018) Model reduction based on limited time interval impulse response gramians. In: 1st Australian and New Zealand Control Conference, ANZCC 2017, 17 - 20 December 2017, Gold Coast Convention and Exhibition Centre (GCCEC)Gold Coast; Australia.

Kumar, Deepak and Haja Mohideen, Ahmad Jazlan and Sreeram, Victor (2018) Generalized time limited Gramian based model reduction. In: 2017 Australian and New Zealand Control Conference (ANZCC), 17th-20th December 2017, Gold Coast, Australia.

Kun-Lin, Lee and Nordin, Anis Nurashikin and Voiculescu, Ioana R. (2018) Preliminary exploration of cell-based SAW detection for water toxicity. In: ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE 2018), 9th-15th Nov. 2018, Pittsburgh; United States.

L

Liu, Yanbiao and Liu, Xiang and Yang, Shengnan and Li, Fang and Shen, Chensi and Huang, Manhong and Li, Junjing and Nasaruddin, Ricca Rahman and Xie, Jianping (2018) Rational design of high-performance continuous-flow microreactors based on gold nanoclusters and graphene for catalysis. ACS Sustainable Chemistry & Engineering, 6 (11). pp. 15425-15433. ISSN 2168-0485

Long, Jia Jia and Benoudjit, Abdel Mohsen and Arris, Farrah Aida and Ali, Fathilah and Wan Salim, Wan Wardatul Amani (2018) Polymers in biosensors. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 151-166. ISBN 978-981-13-2256-3

M

M. A., Siti Nur E’zzati and Anuar, Hazleen and Y.F., Buys and A. R., Siti Munirah Salimah and Ali, Fathilah and M. R., Manshor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042

M. Abu El Sheikh, Mohd Kh. M and Okhunov, Abdurahim and Usmanov, Ph N. and Hassan, Torla (2018) Electric Quadrupole E2- Transitions of 170-174 Yb Isotopes. In: 4th International Conference on Mathematical Applications in Engineering 2017, ICMAE 2017, 8th – 9th of August 2017, Faculty of Engineering, International Islamic University Malaysia.

M. Fathil, Nur Alia and Mohamad Puad, Noor Illi and Azmi, Azlin Suhaida and Amid, Azura (2018) Optimization of citrus suhuiensis suspension culture conditions using Response Surface Methodology (RSM). In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

M. G. Almheiri, Hamda Ghalib and Shuriye, Abdi Omar (2018) Analytical study on social change in Tunisia from the pre-colonial period to Arab spring. International Journal of Business and Social Science, 9 (10). pp. 181-189. ISSN 2219-1933 E-ISSN 2219-6021

M. G. Almheiri, Hamda Ghalib and Shuriye, Abdi Omar (2018) The concept of socio-political contract and its development in the experience of early political Islam. International Journal of Humanities and Social Science, 8 (7). pp. 220-230. ISSN 2220-8488 E-ISSN 2221-0989

Ma, Li Ya and Nordin, Anis Nurashikin and Soin, Norhayati (2018) A novel design of a low-voltage low-loss T-match RF-MEMS capacitive switch. Microsystem Technologies, 24 (1). pp. 561-574. ISSN 0946-7076 (In Press)

Mahat, Sazali and Yusoff, Siti Hajar and Zaini, Syasya Azra and Midi, Nur Shahida and Mohamad, Sarah Yasmin (2018) Automatic metal waste separator system in Malaysia. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur.

Mahmud, Md. Walid and Alam, AHM Zahirul and Rahman, Dewan Atiqur (2018) Improvement of active power factor correction circuit for switch mode power supply using fly back and boost topology. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul (2018) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 1-7. (In Press)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2018) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation. ISSN 1757-2754 E-ISSN 1757-2762 (In Press)

Maleque, Md. Abdul and Shaha, Sugrib Kumar and Razali, Nurul Nadirah (2018) Wear behavior of aluminium modified cast iron in comparison with conventional gray cast iron. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-7. ISBN 978-0-12-803581-8 (In Press)

Manzoor, Zahid and Shahid, Zeeshan and Khan, Sheroz and Hwang, John Tan Teng (2018) Techno-commercial feasibility of grid-tied solar system in philips morris pvt ltd (commercial building) of Pakistan. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017;, Putrajaya.

Marcel, Soropugui M. and Alkhatib, Ma'an Fahmi Rashid and Jami, Mohammed Saedi and Zainudin, Zaki (2018) Bauxite mining and refinery: investigating prospective of red mud management strategies. In: International Engineering Research Conference 2018, 27th June 2018, Selangor. (Unpublished)

Mardina, Vivi and Harmawan, Tisna and ,, Fitriani and Hildayani, Goldha Maulla and Yusof, Faridah (2018) Screening of protease and lipase sources from visceral organs of Euthynnusaffinis. In: 2nd Nommensen International Conference on Technology and Engineering, NICTE 2018, 19 - 20 July 2018, Medan; Indonesia.

Mardina, Vivi and Yusof, Faridah (2018) Skim latex serum as an alternative nutrition for microbial growth. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 179-196. ISBN 978-981-13-2256-3

Marwan Abdulazeez, Qabas and Jami, Mohammed Saedi and Alam, Md. Zahangir (2018) Feasibility of using kaolin suspension as synthetic sludge sample. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (1). pp. 25-39. ISSN 2289-7879

Marzuki, Wan M.R.W. and Abdul Muthalif, Asan Gani and Nordin, N. H.Diyana (2018) Semi-active torsional vibration isolation utilizing magnetorheological elastomer. Vibrations in Physical Systems, 29. pp. 1-8. ISSN 0860-6897

Masadan, Nurul Afifah and Habaebi, Mohamed Hadi and Yusoff, Siti Hajar (2018) LoRa LPWAN propagation channel modelling in IIUM Campus. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Mazli, Mohamad Syafiq and Wan Fauzi, Wan Noor Nadira and Khan, Sheroz and Aznan, Khairil Azhar and Nataraj, Chandrasekharan and Adam, Ismail and Kadir, Kushairy and Ahmed, Musse Mohamud and Yaacob, Mashkuri (2018) Inductive & capacitive wireless power transfer system. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Md Kamal, Mahanijah and Masazhar, Ahmad Nor Ikhwan and Abdul Rahman, Farah Diyana (2018) Classification of leaf disease from image processing technique. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 191-200. ISSN 2502-4752 E-ISSN 2502-4760

Md Zaki, Fatimah Audah and Zulkurnain, Nurul Fariza (2018) RARE: mining colossal closed itemset in high dimensional data. Knowledge-Based Systems, 161. pp. 1-11. ISSN 0950-7051 E-ISSN 1872-7409

Mel, Maizirwan and Hussein Abdeen, Fouad Riyad and Mohd. Salleh, Hamzah and Ihsan, Sany Izan and Ahmad Fuad, Fazia Adyani and Setyobudi, Roy Hendroko (2018) Simulation study of bio-methane conversion into hydrogen for generating 500 kw of power. In: 3rd International Conference on Electrical Systems, Technology and Information, ICESTI 2017, 26th-29th September 2017, Mercure Bali HarvestlandDenpasar, Bali.

Meskon, Shahrul Razi and Othman, Raihan and Ani, Mohd Hanafi (2018) A secondary, coplanar design Ni/MCM-41/Zn microbattery. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Meskon, Shahrul Razi and Othman, Raihan and Ani, Mohd Hanafi (2018) The viability of MCM-41 as separator in secondary alkaline cells. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mirghani, Mohamed Elwathig Saeed and Bouzenita, Anke Sandra and BaHamid, Idris (2018) نقل الميتوكوندريا من منظور إسلامي = Transfer of mitochondria from an Islamic perspective. In: First International Conference of the Faculty of Shari'ah Sciences 2018, 11th Dec. 2018, Sultanate of Oman. (In Press)

Mirghani, Mohamed Elwathig Saeed and Mohamed Elnour, Ahmed Adam and Kabbashi, Nassereldeen Ahmed and Alam, Md Zahangir and Musa, Khalid Hamid and Abdullah, Aminah (2018) Determination of antioxidant activity of gum Arabic: an exudation from two different locations. ScienceAsia, 44 (3). pp. 179-186. ISSN 1513-1874

Mochammad Sahid, Mualimin and Fettane, Amar (2018) Understanding ‘Urf (custom) and local wisdom: an Islamic perspective. In: International Conference on Communication, Proselytizing and Local Wisdom In the Environmental Management Of Contemporary Indonesia, 19th-20th Nov. 2018, Riau, Indonesia. (Unpublished)

Moffaq Alawad, Abdulrahman and Abdul Rahman, Farah Diyana and Khalifa, Othman Omran and Abdul Malek, Norun (2018) Fuzzy logic based edge detection method for image processing. International Journal of Electrical and Computer Engineering, 8 (3). pp. 1863-1869. ISSN 2088-8708

Mohamad, Souad A. and Ahmed, Nafees and Othman, Raihan and Othman, Maizatulnisa (2018) Optimization of TiO2 thin film thickness for dye sensitized solar cell applications. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohamad Fadzir, Tun Mohamad Aqil and Mansor, Hasmah and Gunawan, Teddy Surya and Janin, Zuriati (2018) Development of school bus security system based on RFID and GSM technologies for Klang Valley Area. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th Nov 2018, Songkhla, Thailand.

Mohamad Hanif, Noor Hazrin Hany and Chappell, Paul Hammond and White, Neil Maurice and Cranny, Andy (2018) A psychophysical investigation on vibrotactile sensing for transradial prosthesis users. Cogent Engineering, 5 (1). pp. 1-14. ISSN 2331-1916

Mohamad Nasir, Haidawati and Wan Aziz, Wan Basyar and Ali, Fuead and Abdul Kadir, Kushsairy and Khan, Sheroz (2018) The implementation of IoT based smart refrigerator system. In: 2nd International Conference on Smart Sensors and Application, ICSSA 2018, 24th-26th July 2018, Kuching, Malaysia.

Mohamad Puad, Noor Illi and Abd Rahim, Nurainin Farhan and Azmi, Azlin Suhaida (2018) Acid pretreatment of sago wastewater for biohydrogen production. In: International Conference on Civil & Environmental Engineering (CENVIRON 2017), 28th-29th Nov. 2017, Pulau Pinang.

Mohamad Puad, Noor Illi and Abdullah, Tajul Afif (2018) Monitoring the growth of plant cells in suspension culture. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 203-214. ISBN 978-981-13-2256-3

Mohamad Puad, Noor Illi and Saipullah, Nur Syafiqah Yasmin and Ulhiza, Tami Asti (2018) Feasibility study and kinetics of biohydrogen production by Escherichia coli from hydrolyzed sago wastewater. Journal of Advanced Research in Biofuel and Bioenergy, 2 (1). pp. 1-9. E-ISSN 2600-8459

Mohamad Puad, Noor Illi and Sarji, Muhammad Alif and M. Fathil, Nur Alia and Abduh, Muhammad Yusuf (2018) Growth kinetics of citrus Suhuiensis cell suspension cultures. Biological and Natural Resources Engineering Journal, 1 (1). pp. 1-13. ISSN 2637-0719

Mohamad Razali, Nur Fatin and Md Ralib @ Md Raghib, Aliza 'Aini and Ab Rahim, Rosminazuin (2018) Performance analysis of SAW gas sensor based on ST-Cut quartz for breath analysis. In: 2018 IEEE International Conference on Semiconductor Electronics (ICSE), 15th-17th Aug. 2018, Pullman Kuala Lumpur City Centre Hotel and ResidenceKuala Lumpur.

Mohamed, Ruziana and Mamat, M. H. and Malek, Mohd Firdaus and Ismail, Ahmad Syakirin and Mohd Yusoff, Marmeezee and Mohd Noor, Asiah and Khusaimi, Zuraida and Rusop, Mohamad (2018) Effect of different coating layer on the topography and optical properties of ZnO nanostructured. In: 8th International Conference on Nanoscience and Nanotechnology 2017, NANO-SciTech 2017, 24 -27 February 2017, NANO-SciTech 2017; Selangor; Malaysia.

Mohamed, Ruziana and Mamat, Mohamad Hafiz and Malek, Mohd Firdaus and Ismail, Ahmad Syakirin and Mohd Yusoff, Marmeezee and Syamsir, S. A. and Khusaimi, Zuraida and Mahmood, Mohamad Rusop (2018) Effect of co-doping process on topography, optical and electrical properties of ZnO nanostructured. In: 8th International Conference on Nanoscience and Nanotechnology 2017, NANO-SciTech 2017, 24 - 27 February 2017, Selangor; Malaysia.

Mohamed Elnour, Ahmed Adam and Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Alam, Md Zahangir and Musa, Khalid Hamid (2018) Gum arabic: an optimization of ultrasonic-assisted extraction of antioxidant activity. Chemia, LXIII (63) (3). pp. 95-116. ISSN 1224-7154 E-ISSN 2065-9520

Mohamed Elnour, Ahmed Adam and Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Musa, Khalid Hamid (2018) Gum arabic: determination of solvent effect on the extraction of phenolic compounds and antioxidant activity using principle component analysis. In: 4th International Conference on Chemical Engineering and Industrial Biotechnology (ICCEIB 2018), 1st-2nd August 2018, Kuantan, Pahang. (Unpublished)

Mohamed Elnour, Ahmed Adam and Mirghani, Mohamed Elwathig Saeed and Khalid Hamid, Musa and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir (2018) Challenges of extraction techniques of natural antioxidants and their potential application opportunities as anti-cancer agents. Health Science Journal, 12 (5:596). pp. 1-25. ISSN 1791-809X

Mohamed Noor, Noraini and Chan Abdullah, Ezzat (2018) Self-purging pyrolysis of sugarcane bagasse biomass to disordered microporous biochar production. International Journal of Engineering & Technology, 7 (4.38). pp. 1680-1682. E-ISSN 2227-524X

Mohamed Yatim, Norazlina and Shaaban, Azizah and Dimin, Mohd Fairuz and Yusof, Faridah and Abdul Razak, Jeefferie (2018) Effect of functionalised and non-functionalised carbon nanotubes-urea fertilizer on the growth of paddy. Tropical Life Sciences Research, 29 (1). pp. 17-35. ISSN 1985-3718 E-ISSN 2180-4249

Mohammad, Zahangir Alam and Khan, Sheroz and Adam, Ismail and Abdul Kadir, Kushsairy and Nordin, Anis Nurashikin and Ibrahim, Siti Noorjannah (2018) A proposed resistance-to-time converter with switching impulse calibrators for application in resistive bridge sensors. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). pp. 47-50. ISSN 2502-4752 E-ISSN 2502-4760

Mohammad, Zahangir Alam and Khan, Sheroz and Adam, Ismail and Kadir, Kushairy and Nordin, Anis Nurashikin and Ibrahim, Siti Noorjannah (2018) A proposed resistance-to-time converter with switching impulse calibrators for resistive bridge sensors. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Mohammed, Hibah and Gheriani, Haneen and Mohamed, Adel and Hammoda, Ahmed and Khalil, Ashraf F. and Khan, Sheroz and Ahmed, Syed Faiz and Ali, Athar (2018) Simulation and experimental verification of PID controlled DC/DC buck converter in wind energy conversion system. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November 2017 - 1 December 2017, AMA International University Salmabad; Bahrain.

Mohammed, Mohammed Omar Abdalqadir and Mirghani, Mohamed Elwathig Saeed and Arabi, Sami Ahmed Mohammed (2018) Effect of different levels of dietary cottonseed oil on broiler chicks production. Biological and Natural Resources Engineering Journal (BNREJ), 1 (1). pp. 58-74. E-ISSN 2637-0719

Mohammed, Nurudeen Ishola and Kabbashi, Nassereldeen Ahmed and Alade, Abass Olanrewaju (2018) Significance of agricultural residues in sustainable biofuel development. In: Agricultural waste and residues. IntechOpen, United Kingdom, pp. 71-88.

Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Sulaeman, Erwin and Omar, Ashraf Ali (2018) Aerodynamics of porous airfoils and wings. Acta Mechanica, online 1st. pp. 1-19. ISSN 0001-5970 E-ISSN 1619-6937 (In Press)

Mohammed Nadzri, Nur Izzati and Sidek, Khairul Azami and Ismail, Ahmad Fadzil (2018) Biometric recognition for twins inconsideration of age variability using PPG signals. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-5). pp. 97-100. ISSN 2180-1843 E-ISSN 2289-8131

Mohammed Riyadh, Miah and Syed Mohamed Ali, Jaffar (2018) A matlab based educational software for the study on the effect of cut-out in aircraft wings. International Journal of Engineering & Technology, 7 (4.25). pp. 114-118. ISSN 2227-524X

Mohammed Umair, Siddque and Alrobaian, Abdul Rahman and Khan, Sher Afghan and Gnanagonda Kashinath, Marthande and Rajesh, Patil (2018) Numerical investigation of critical range for the occurrence of secondary peaks in the Nusselt distribution curve. CFD Letters, 10 (2). pp. 1-17. ISSN 2180-1363

Mohd Abid, Mohd Asyadi Azam and Raja Seman, Raja Noor Amalina and Zulkifli, Mohd Fadzil and Mohamed, Mohd Ambri and Ani, Mohd Hanafi (2018) Carbon nanomaterials derived from Malaysia’s highway road asphalt waste as electrode for supercapacitor. Journal of Materials and Environmental Sciences, 9 (7). pp. 2164-2168. ISSN 2028-2508

Mohd Ali, Afifah and Janal, Nurul Nabihah and Hamidon, Nor Ezzati and Ahmad Azhar, Ahmad Zahirani and Mokhtar, Suhaily and Bahar, Rubina and Ahmad, Zainal Arifin (2018) The relationship of cutting chip type, length and thickness to wear of Zirconia Toughened Alumina Added with Magnesium Oxide (ZTA-MgO) cutting tool. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 452-457. ISSN 2581-4311

Mohd Ariffin, M K A and Sukindar, Nor Aiman and Baharudin, B.T. H T and Jaafar, C N A and Ismail, M I S (2018) Slicer method comparison using open-source 3D printer. In: 2017 International Conference on Power and Energy Engineering, 13th–15th September 2017, Ottawa, Canada.

Mohd Arshad, Zatul Iffah and Amid, Azura (2018) Procedure to develop binodal curve and phase diagram for aqueous two-phase system. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 75-82. ISBN 978-981-13-2256-3

Mohd Daud, Farah Diana and Kahlib, Nor Amyra Zulianey and Mohd Rafi, Muhammad Husaini and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina and Nor Hairin, Assayidatul Laila (2018) Effect of calcination temperature on the silica ceramic membrane synthesized via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, Special issue. pp. 63-67. ISSN 2581-4311

Mohd Esa, Luqman Naim and Morshidi, Malik Arman and Mohd Zailani, Syarah Munirah (2018) Development of pose estimation algorithm for Quranic Arabic word. TTELKOMNIKA Telecommunication, Computing, Electronics and Control, 16 (4). pp. 1633-1641. ISSN 1693-6930 E-ISSN 2302-9293

Mohd Hatta, Maziati Akmal and Abd Rashid, Mohd Warikh M. and Azlan, Umar Al Amani and Azmi,, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, M. S. (2018) Optimizing the processing conditions of sodium potassium niobate thin films prepared by sol-gel spin coating technique. Ceramics International, 44 (1). pp. 317-325. ISSN 0272-8842

Mohd Isa, Nur Zarifah and Al-Khatib, Ma An Fahmi Rashid and Ahmad, Farah and Ahmad Raus, Raha and Alqedra, Fadi I. A. (2018) Influence of aeration on nutrients removal by chlorella sp. from wastewater. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Mohd Ismail, Kamsiah and Radin Salim, Kamilah and Haron, Habibah Norehan and Hussain, Noor Hamizah and Ali, Rosmah and Abdullah, Morina and Mohamed, Zainai (2018) Evaluation of laboratory facilities for engineering technology programs in Malaysian technical universities. International Journal of Social Science Studies, 6 (5). pp. 1-9. ISSN 2324-8033 E-ISSN 2324-8041

Mohd Johari, Nabila Husna and Abd Malik, Noreha and Sidek, Khairul Azami (2018) Distinctive features for classification of respiratory sounds between normal and crackles using cepstral coefficients. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Mohd Khairi, Mohamad Azim and Ab Rahim, Rosminazuin and Saidin, Norazlina and Hasbullah, Nurul Fadzlin and Abdullah, Yusof (2018) Reliability study of silicon carbide Schottky Diode with fast electron irradiation. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur.

Mohd Khairuddin, Ismail and Sidek, Shahrul Na'im and Md. Yusof, Hazlina and Abdul Majeed, A.P.P. and Puzi, A Ahmad and Rosly, H Mat (2018) Assistive-as-needed strategy for upper-limb robotic systems: A preliminary evaluation of the impedance control architecture. In: International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018), 1-2 March 2018, Pahang, Malaysia.

Mohd Mansor, Ahmad Fairuzabadi and Nordin, Anis Nurashikin (2018) Theoretical modelling of interdigitated electrode sensor for mammalian cell characterization. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur.

Mohd Nawi, Mohd Nazri and Stuckey, David (2018) Pre-oxidation of ammonium using nanofiltration membranes for partial nitrification preceding Anammox. Chemical Engineering Journal, 353. pp. 218-224. ISSN 1385-8947 E-ISSN 1873-3212

Mohd Noh, Farhan and Hamida, Belal Ahmed (2018) The effect of different coupling in ring CW fiber laser using graphene saturable absorber. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Mohd Noor, Najihah and Hashim, Yumi Zuhanis Has-Yun and Ahmad Nor, Yusilawati and Tshai, Albert and Wan Salim, Wan Wardatul Amani and Sopyan, Iis (2018) Electrospun Poly (Vinyl Alcohol) (PVA) fiber mats as carriers for extract from agarwood branch. In: International Conference on Halal Innovation in Products and Services 2018 (i-CHIPS 2018), 13th-14th July 2018, Haat Yai, Songkhla, Thailand.

Mohd Pu'ad, Muhamad Farhan and Sidek, Khairul Azami and Mel, Maizirwan (2018) Preliminary study on designing and development of a synthesis gas analyser in the process of gasification. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (1). pp. 76-84. E-ISSN 2289-7879

Mohd Ramli, Huda Adibah and Asnawi, Ani Liza and Mohd. Isa, Farah Nadia and Azman, Amelia Wong and Mansor, Mohamad Ismat Hafizi (2018) Investigations of component carrier selection algorithms in long term evolution-advanced. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 330-336. ISSN 2502-4752 E-ISSN 2502-4760

Mohd Razib, Mohd Asyraf and Saleh, Tanveer and Islam, Saiful and Rana, Masud and Abdul Muthalif, Asan Gani (2018) Optical characterization of tip bended vertically aligned carbon nanotubes array. Chemical Physics Letters, 711. pp. 37-41. ISSN 0009-2614

Mohd Zaki, Hafizah Hanim and Mohamad Sholihin, Mohamad Hanis and Abdullah, Jamaluddin and Sarifuddin, Norshahida (2018) Comparison studies on phase formation and transformation behavior between Ni-Ti and Ni-TiH2 synthesized via solid state sintering. International Journal of Current Science, Engineering & Technology, 1 (special issue 1). pp. 464-470. ISSN 2581-4311 E-ISSN 2581-4311

Mohd Zamri, Muhamad Zul Asraf and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek (2018) Graphical vs. nongraphical displays: which one is the best labeling system for laboratory searching task? Human Factors and Ergonomics Journal, 3 (1). pp. 26-33. E-ISSN 2590-3750

Mohd Zubairi, Nurul Hidayah and Alam, Md Zahangir and Salleh, Mohd Noor and Mohd. Salleh, Hamzah and Fazil, Nurul Alia (2018) A new isolate of thermophilic and organic solvent tolerant bacteria for lipase production using basal medium of palm kernel cake. Malaysian Journal of Microbiology, 14 (2 (Special issue)). pp. 80-87. ISSN 1823-8262 E-ISSN 2231-7538

Mohd. Ali, Ainoor Mariana and Mansor, Mariatul Fadzillah and Alam, Md. Zahangir (2018) Achievements and perspectives on anaerobic co-digestion of food waste and sewage sludge for biogas production. In: 5th International Conference Biotechnology Engineering 2018 (ICBioE ‘18), 19th-20th, 2018, Kuala Lumpur, Malaysia.

Mohd. Salleh, Hamzah and Hashim, Yumi Zuhanis Has-Yun and Samsudin, Nurhusna and Abdul Halim, Muhammad A. N. (2018) Development of porous PCL-based microcarrier. In: International Conference on Halal Innovation in Products and Services 2018 (i-CHIPS 2018), 13th-14th July 2018, Haat Yai, Songkhla, Thailand.

Mohiuddin, A. K. M. and Syafie, Ahmad and Khan, Ahsan Ali (2018) Design and analysis of fuel cell stack for automotive use. International Review of Mechanical Engineering (IREME), 12 (6). pp. 540-547. ISSN 1970-8734 E-ISSN 2532-5655

Mohs Apandi, Siti Nur 'Ezzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah (2018) Effect of coupling agent on durian skin fibre nanocomposite reinforced polypropylene. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, Gombak, Kuala Lumpur.

Mohtar, Johan Ariff and Ooi, W. L. and Yusof, Faridah (2018) Spider silk processing for spidroin recovery from crossopriza lyoni web. In: Malaysian Technical Universities Conference on Engineering and Technology 2017, MUCET 2017, 6 -7 December 2017, Park Royal HotelPenang.

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Harun, Azmi and Mohd Ali, Afifah and Muhamad Khairussaleh, Nor Khairusshima (2018) Study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills. In: 2018 6th International Conference on Nano and Materials Science (ICNMS 2018), 15th-17th January 2018, Lakeland; United States.

Mondal (Das), Kuheli and Das, Saurav and Abu, Aminudin and Hamada, Nozomu and Toh, Hoong Thiam and Das, Saikat and Faris, Waleed Fekry (2018) All-pass filtered x least mean square algorithm for narrowband active noise control. Applied Acoustics, 142. pp. 1-10. ISSN 0003-682X

Motakabber, S. M. A. and Haidari, M. N. (2018) Design of an interdigital structure planar bandpass filter for UWB frequency. International Journal of Electrical and Computer Engineering (IJECE), 8 (3). pp. 1654-1658. ISSN 2088-8708

Motakabber, S. M. A. and Rahman, M. Wahidur and Ibrahimy, Muhammad Ibn (2018) Simulation and modeling of high voltage DC to AC PWM inverter for electrostatic generator. In: 2018 International Conference on Aerospace, Mechanical and Mechatronic Engineering 2018, 23rd-26th March 2018, Hanoi, Vietnam.

Motakabber, S. M. A. and Zahirul Alam, A. H. M. and Ibrahimy, Muhammad Ibn and Za'bah, Nor Farahidah and Sidek, Khairul Azami (2018) Characterization for verification of electrostatic generator's effectiveness for power generation. Project Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Mt Aznam, Suazlan and Chowdhury, Md. Sazzad Hossien (2018) Generalized Haar wavelet operational matrix method for solving hyperbolic heat conduction in thin surface layers. Results in Physics, 11. pp. 243-252. ISSN 2211-3797

Muhaisen, Naser and Khan, Sheroz and Ismail, Zeyad M. A. and Habaebi, Mohamed Hadi and Ahmed, Nabil A. and Ahmed, Musse Mohamud (2018) Simulation analysis for maximizing renewable solar energy to improve the power generation capacity in the state of Kuwait. In: 2017 IEEE 3rd International Conference on Engineering Technologies and Social Sciences (ICETSS), 7-8 August 2017, Bangkok, Thailand.

Muhamad Khairussaleh, Nor Khairusshima and Zakwan, Muhammad Hafiz and Mokhtar, Suhaily and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri (2018) The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Muhammad, Abdulazeez Uba and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Automotive seat fit parameters based on representative Nigerian anthropometric data. Malaysian Journal of Public Health Medicine, 18 (Special Issue 2). pp. 32-40. ISSN 1675-0306

Mukhtar, Azfarizal and Ng, Khai Ching and Yusoff, Mohd Zamri (2018) Design optimization for ventilation shafts of naturally-ventilated underground shelters for improvement of ventilation rate and thermal comfort. Renewable Energy, 115. pp. 183-198. ISSN 0960-1481

Mukhtar, Azfarizal and Ng, Khai Ching and Yusoff, Mohd Zamri (2018) Passive thermal performance prediction and multi-objective optimization of naturally-ventilated underground shelter in Malaysia. Renewable Energy, 123. pp. 342-352. ISSN 0960-1481

Mukhtar, Azfarizal and Yusoff, Mohd Zamri and Ng, Khai Ching (2018) An empirical estimation of underground thermal performance for Malaysian climate. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Mukhtar, Azfarizal and Yusoff, Mohd Zamri and Ng, Khai Ching and Mohamed Nasir, Mohamed Fariz (2018) Application of Bbox-Behnken design with response surface to optimize ventilation system in underground shelter. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (2). pp. 161-173. ISSN 2289-7879

Muse, Mohamamud Yousuf and Shuriye, Abdi Omar (2018) The impact of different history curricula on Somali students’ patriotism. The Islamic Centre for Research and Development Inc. Sydney, Australia, 9. pp. 37-57. ISSN 1834-6170 E-ISSN 2208-469X;

Muse, Mohamamud Yousuf and Shuriye, Abdi Omar (2018) The major issues of incoming presidential election in the republic of Somaliland. The Islamic Centre for Research and Development Inc. Sydney, Australia, 9. pp. 60-82. ISSN 1834-6170 E-ISSN 2208-469X

Mustafa, A. M. Ahmad and Mohamad, Sarah Yasmin and Abdul Malek, Norun Farihah and Mohd. Isa, Farah Nadia and Islam, Md. Rafiqul (2018) A wideband circularly-polarized spiral antenna for Cube Sat Application. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-8). pp. 17-20. ISSN 2180-1843 E-ISSN 2289-8131

Mustafa, Muhammad Hadi and Ali, Maisarah and Mohamad Suhaimi, Mohamad Saifulnizam and Hashim, Khairusy Syakirin Has-Yun and Mohd Ismail, Kamsiah (2018) Traditional Malay building as-built drawings reproduction using building information modelling. In: ASEAN Postgraduate Conference 2018, 15th Nov. 2018, Kuala Lumpur. (Unpublished)

Mustaffa, Nooraidah and Jamal, Parveen and Olorunnisola, Kola Saheed and Ansari, Abdul Haseeb (2018) Method for isolation of bacterial strain from contaminated soil for biodegradation of polycyclic aromatic. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 197-202. ISBN 978-981-13-2256-3

N

N., Muzzammil and Jami, Mohammed Saedi and Abu Bakar, Mohd Rushdi and Subramaniam, Vijaya and Kheang, Loh Soh (2018) Scale deposits from palm oil mill effluent (POME) treatment and various other industries: A developmental review. Journal of Oil Palm Research, 30 (3). pp. 361-365. ISSN 1511-2780

Nabinejad, Omid and Debnath, Sujan and Beh, Jack Kai and Ali, Mohammad Yeakub (2018) Mechanical performance and moisture absorption of unidirectional bamboo fiber polyester composite. In: 8th International Conference on Manufacturing Science and Technology, ICMST 2017, 23-25 June 2017, Hong Kong.

Naing, Lwinthein and Mohd Ghani, Ahmad Shahril and Sahalan, Muhammad Irsyad and Abdul Aziz, Mazlan and Zainal Abidin, Zulkifli and Rashid, Muhammad Mahbubur (2018) Development and fieldwork trial of autonomous surface vehicles for bathymetry mapping. In: 7th IEEE International Conference on Underwater System Technology: Theory and Applications, USYS 2017, 18 - 20 December 2017, Menara Razak, UTM Kuala Lumpur.

Nasaruddin, Ricca Rahman and Chen, Tiankai and Li, Jingguo and Goswami, Nirmal and Zhang, Jiaguang and Yan, Ning and Xie, Jianping (2018) Ligands modulate reaction pathway in the hydrogenation of 4-Nitrophenol catalyzed by gold nanoclusters. ChemCatChem, 10 (2). pp. 395-402. ISSN 1867-3899

Nasaruddin, Ricca Rahman and Chen, Tiankai and Yan, Ning and Xie, Jianping (2018) Roles of thiolate ligands in the synthesis, properties and catalytic application of gold nanoclusters. Coordination Chemistry Reviews, 368. pp. 60-79. ISSN 0010-8545

Nasaruddin, Ricca Rahman and Yao, Qiaofeng and Chen, Tiankai and Hülsey, Max J. and Yan, Ning and Xie, Jianping (2018) Hydride-induced ligand dynamic and structural transformation of gold nanoclusters during a catalytic reaction. Nanoscale, 10 (48). pp. 23113-23121. E-ISSN 2040-3372

Nasruddin, Arina and Amid, Azura and Sulaiman, Sarina and Othman, Muhd. Ezza Faiez (2018) Biosynthesis of nanoparticles using recombinant bromelain. Biological and Natural Resources Engineering Journal, 1 (1). pp. 14-25. E-ISSN 2637-0719

Nataraj, Chandrasekharan and Ismael, Assia Ali and Selvaperumal, Sathish Kumar and Khan, Sheroz (2018) Compact multiband microstrip patch antenna with slot-rings for wireless applications. In: 15th IEEE Student Conference on Research and Development, SCOReD 2017, 13 December 2017 through 14 December 2017, Putrajaya; Malaysia.

Nataraj, Chandrasekharan and Khan, Sheroz and Habaebi, Mohamed Hadi and Muthalif, Asan G. A. (2018) General analysis of resonance coupled wireless power transfer (WPT) using inductive coils. Technical Gazette=Tehnicki Vjesnik, 25 (3). pp. 720-726. ISSN 1330-3651 E-ISSN 1848-6339

Ngabura, Mohammed and Hussain, Siti Aslina and Ghani, Wan Abdul Karim and Jami, Mohammed Saedi and Tan, Yen Ping (2018) Optimization and activation of renewable durian husk For biosorption of Pb(ii) from wastewater. In: 4th International Conference of Chemical Engineering & Industrial Biotechnology (ICCEIB 2018), 19th-20th Sept. 2018, Kuala Lumpur. (Unpublished)

Ngabura, Mohammed and Hussain, Siti Aslina and W.A. Ghani, Wan Azlina and Jami, Mohammed Saedi and Tan, Yen Ping (2018) Utilization of renewable durian peels for biosorption of zinc from wastewater. Journal of Environmental Chemical Engineering, 6 (2). pp. 2528-2539. ISSN 2213-3437

Ngatiman, Muzammil and Jami, Mohammed Saedi and Abu Bakar, Mohd Rushdi and Subramaniam, Vijaya and Kheang, Loh Soh (2018) Physicochemical characteristics of struvite crystals formed in palm oil mill effluent anaerobic digester. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Ngatiman, Muzammil and Jami, Mohammed Saedi and Abu Bakar, Mohd Rushdi and Vijaya, Subramaniam and Soh, Kheang Loh (2018) Mitigation of struvite formation in palm oil mill effluent (POME) treatment facilities. In: Lca Food 2018 In Conjunction with Lca Agri Food Asia 2018 and ICGSI 2018, 16th-20th Oct. 2018, Bangkok, Thailand. (Unpublished)

Nik Hashim, Nik Nur Wahidah (2018) Performance analysis of novel speech based psychological assessment tool using Bahasa Malaysia. Research Report. UNSPECIFIED. (Unpublished)

Nirabi, Ali and Hameed, Shihab Ahmed (2018) Mobile cloud computing for emergency healthcare model:framework. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur.

Nor Hairin, Assayidatul Laila and Romainor, M. N. and Othman, Raihan and Mohd Daud, Farah Diana (2018) Electrodeposition of zinc antimony alloy thermoelectric materials. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Nor Shahrudin, Nur Shahirah and Sidek, Khairul Azami and Ismail, Ahmad Fadzil (2018) Development of a driver drowsiness monitoring system using electrocardiogram. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 11-15. ISSN 2180-1843 E-ISSN 2289-8131

Nordin, Noor Faizul Hadry and Aihemaiti, Zulipiye and Ahmad Raus, Raha (2018) Optimization of supercritical fluid extraction conditions for L. chinense and L. barbarum fruits. In: International Conference on Halal Innovations in Products and Services 2018 (i-CHIPS 2018), 13th -14th July 2018, Songkla, Thailand.

Nordin, Nor Hidayati Diyana and Abdul Muthalif, Asan Gani and M Razali, M khusyaie (2018) Control of transtibial prosthetic limb with magnetorheological fluid damper by using a fuzzy PID controller. Journal of Low Frequency Noise, Vibration & Active Control, 37 (4). pp. 1067-1078. ISSN 0263-0923

Norsahperi, Nor Mohd Haziq and Ahmad, Salmiah and Toha @ Tohara, Siti Fauziah and Mahmood, Iskandar Al-Thani and Mohamad Hanif, Noor Hazrin Hany (2018) Robustness analysis of fractional order PID for an electrical aerial platform. Journal of Mechanical Science and Technology, 32 (11). pp. 5411-5419. ISSN 1738-494X E-ISSN 1976-3824

Nugroho, Larasmoyo and Akmeliawati, Rini (2018) Comparison of black-grey-white box approach in system identification of a flight vehicle. In: 6th International Seminar of Aerospace Science and Technology (ISAST 2018), 25th-26th Sept. 2018, Jakarta, Indonesia.

O

Obaid, Ahmed Kareem and Syed Abdul Azziz, Saripah Salbiah and Mhd Bakri, Yuhanis and Nafiah, Mohd Azlan and Awang, Khalijah and Abdulla Aowda, Saadon and Litaudon, Marc and Mohd Hassan, Norazian and Naz, Humera and Abbas, Phirdaous and Hashim, Yumi Zuhanis Has-Yun and Majhool, Alhussein Arkan (2018) Alkaloids from alphonsea elliptica barks and their biological activities. Journal of Global Pharma Technology, 10 (8). pp. 270-275. ISSN 0975-8542

Ogu Salim, Nurhainis and Khairuddin, Farahayu and Jonet, Mohd Anuar and Ahmad Fuad, Fazia Adyani (2018) Cloning and expression of lactate dehydrogenase from plasmodium knowlesi for anti-malarial drug development. In: Asia Pacific Academic Consortium for Public Health Conference, 12-14 Sep 2018, Kota Kinabalu.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Abdul Ghaffar, Alia Farhana (2018) Satellite attitude tracking control using thrusters and momentum wheels. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Okasha, Mohamed Elsayed Aly Abd Elaziz and Islam, Maidul and Sulaeman, Erwin and Legowo, Ari (2018) Evaluation performance of linear quadratic regulator and linear quadratic gaussian controllers on quadrotor platform. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Okhunov, Abduahim and Usmanov, Phazlitdin and Hassan, Torla and Abu El Sheikh, Mph’d Hk.M. (2018) Analyses of the structure of wave functions and energies spectra of ground and low excited states of Ytterbium isotopes. In: 6th International Conference on Functional Materials & Devices 2017 (ICFMD–2017), 15th-18th August 2017, Melaka, Malaysia. (In Press)

Olalere, Olusegun Abayomi and Abdurahman, Nour Hamid and Mohd Yunus, Rosli and Alara, Oluwaseun Ruth and Kabbashi, Nassereldeen Ahmed (2018) Chemical fingerprinting of biologically active compounds morphological transformation during microwave reflux extraction of black pepper. Chemical Data Collections, 17-18. pp. 339-344. ISSN 2405-8300

Olanrewaju, Rashidah Funke and Islam, Thouhedul and Khalifa, Othman Omran and Fajingbesi, Fawwaz Eniola (2018) Data in transit validation for cloud computing using cloud-based algorithm detection of injected objects. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 348-353. ISSN 2502-4752 E-ISSN 2502-4760

Olanrewaju, Rashidah Funke and Khan, Burhan Ul Islam and Khan, Abdul Raouf and Yaacob, Mashkuri and Alam, Md Moktarul (2018) Efficient cache replacement policy for minimizing error rate in L2-STT-MRAM caches. International Journal of Grid and Utility Computing, 9 (4). pp. 307-321. ISSN 1741-8488

Olanrewaju, Rashidah Funke and Khan, Burhan Ul Islam and Khan, Abdul Raouf and Yaacob, Mashkuri and Alam, Md. Moktarul (2018) Efficient cache replacement policy for minimising error rate in L2-STT-MRAM caches. International Journal of Grid and Utility Computing, 9 (4). pp. 307-321. ISSN 1741-847X E-ISSN 1741-8488

Olanrewaju, Rashidah Funke and Khan, Burhan ul Islam and Anwar, Farhat and Mir, Roohie Naaz (2018) Internet of things security vulnerabilities and recommended solutions. International Journal of Engineering & Technology, 7 (4). pp. 4899-4904. ISSN 2227-524X

Olanrewaju, Rashidah Funke and Mohd Radzi, Muhammad Luqman Azzaki and Rehab, Mariam and Fajingbesi, Fawwaz Eniola (2018) Design and fabrication of an intelligent walking staff for visually impaired subjects. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 266-270. ISSN 2502-4752 E-ISSN 2502-4760

Olorunnisola, Kola Saheed and Jamal, Parveen and Alam, Md Zahangir (2018) Growth, substrate consumption, and product formation kinetics of Phanerochaete chrysosporium and Schizophyllum commune mixed culture under solid-state fermentation of fruit peels. 3 Biotech, 8 (10). ISSN 2190-572X E-ISSN 2190-5738

Olorunnisola, Kola Saheed and Jamal, Parveen and Alam, Md Zahangir (2018) Protein improvement of banana peel through sequential solid state fermentation using mixed-culture of phanerochaete chrysosporium and Candida utilis. 3 Biotech, 8 (10). pp. 1-10. ISSN 2190-572X

Othman, Maizatulnisa and N., Hasmida and Halim, Zahurin and Jamal, Nur Ayuni and Khalid, Khalisanni and Zakaria, Noor Amalina and Al-Bat’hi, Souad A. M. (2018) Mechanical properties of gracilaria lichenoides reinforced bioplastic film. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Othman, Maizatulnisa and Yusup, Afiqah Athirah and Zakaria, Nazarudin and Khalid, Khalisanni (2018) Bio-polymer chitosan and corn starch with extract of hibiscus rosa-sinensis (hibiscus) as PH indicator for visually-smart food packaging. AIP Conference Proceedings, 1985. 050004-1. ISSN 0094-243X E-ISSN 1551-7616

P

Paijan, Lailatul Harina and Maleque, Md. Abdul (2018) Tribological properties of surface coated duplex stainless steel containing SiC ceramic particles. Jurnal Tribologi, 18. pp. 136-148. E-ISSN 2289-7232

Pang, Ming Meng and Koay, Seong Chun and Low, Jiun Hor and Buys, Yose Fachmi and Tshai, Kim Yeow (2018) Study on the plasticiser type for biobased microcrystalline cellulose filled polylactic acid composite. In: 5th International Conference on Process Engineering and Advanced Materials, ICPEAM 2018, 13th-14th August 2018, Kuala Lumpur.

Pathan, Khizer Ahmed and Dabeer, P S and Khan, Sher Afghan (2018) An investigation to control base pressure in suddenly expanded flows. International Review of Aerospace Engineering (IREASE), 11 (4). pp. 162-169. ISSN 1973-7459 E-ISSN 2533-2279

Pathan, Khizer Ahmed and Dabeer, P. S. and Khan, Sher Afghan (2018) Optimization of area ratio and thrust in suddenly expanded flow at supersonic Mach numbers. Case Study in Thermal Engineering, 12. pp. 696-700. ISSN 2214-157X

Perdana, Firdaus Fanny Putera and Jan, Muhammad Tahir and Altunişik, Remzi and Jaswir, Irwandi and Kartika, Betania (2018) A research framework of the halal certification role in purchase intention of Muslim consumers on the food products from Muslim majority countries in the Middle East and North Africa. International Journal of Modern Trends in Business Research, 1 (2). pp. 15-28. E-ISSN 2600-8742

Pinardi, Sofia and Ismail, Ahmad Fadzil and Hasan, Mohammad Kamrul and Abdullah, Khaizuran (2018) Performance comparison of DFT, DCT and DWT based OFDM with wavelet family to minimize PAPR. Journal of Fundamental and Applied Sciences, 10 (2 (Special issue)). pp. 138-150. ISSN 1112-9867

Purwanto, Hadi and Mohd. Salleh, Hamzah and Mohamad, A. S. and Zakiyuddin, A. (2018) Effect of EFB content on reducibility of low grade iron ore composite at 1000°C - 1200°C. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Purwanto, Hadi and Mohd. Salleh, Hamzah and Mohamad, Ainun Shaheera and Mohd Zakiyuddin, Amrina and Rozhan, Alya Naili (2018) Effect of EFB content on reducibility of low grade iron ore composite at 1000oC – 1200oC. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8- 9 August 2017, IIUM, Gombak, Kuala Lumpur.

Purwanto, Hadi and Mohd. Salleh, Hamzah and Rozhan, Alya Naili and Mohamad, A.S. and Zakiyuddin, Ahmad (2018) Phase change of iron ore reduction process using EFB as reducing agent at 900-1200°C. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1-2 March 2018, Pekan, Pahang, Malaysia.

Purwanto, Hadi and Rozhan, Alya Naili and Mohamad, A. S. and Zakiyuddin, Ahmad (2018) Characteristics of iron ore sinter with EFB addition. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1 -2 March 2018, Universiti Malaysia Pahang (UMP) Pekan Campus LibraryPekan, Pahang; Malaysia.

Q

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2018) Base pressure behaviour in a suddenly expanded duct at supersonic mach number regimes using Taguchi design of experiments. Mechanics and Mechanical Engineering, 22 (4). pp. 1077-1097. ISSN 1428-1511 E-ISSN 2354-0192

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2018) Study of base pressure behavior in a suddenly expanded duct at supersonic mach number regimes using statistical analysis. Journal of Applied Mathematics and Computational Mechanics, 17 (4). pp. 59-72. ISSN 2299-9965 E-ISSN 2353-0538

R

Rahimi, Norzihan and Hussain, Ahmad Kamil and Shaik Dawood, Mohd. Sultan Ibrahim and Mohd Alias, Adib Zulfadhli and Md Yusoff, Muhamed Hafiy Afiq and Mahmud, Jamaluddin (2018) Failure analysis of woven Kevlar/Epoxy under uniaxial tension. International Journal of Engineering and Technology(UAE), 7 (4). pp. 235-239. ISSN 2227-524X

Rahmad, Muhammad Aizat and Midi, Nur Shahida and Zaini, Syasya Azra and Yusoff, Siti Hajar and Mohamad, Sarah Yasmin (2018) Material classification of recyclable waste using the weight and size of waste. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur.

Rahman, Dewan Atiqur and Mohamad, Sarah Yasmin and Abdul Malek, Norun and Rahman, Dewan Arifur and Zabri, Siti Normi (2018) A wideband mm-wave printed dipole antenna for 5G applications. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 943-950. ISSN 2502-4752 E-ISSN 2502-4760

Rahman, Md Mujibur and Rahman, Haolia Y. and Awang, M. A.A. and Sopyan, Lis (2018) Effects of sintering time and temperature to the characteristics of FeCrAl powder compacts formed at elevated temperature. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Rahman, Mohammed Ataur and Amsyar, Mohamad and Ihsan, Sany Izan and Mohiuddin, A. K. M. (2018) Electro-hydro-mechanical braking system for passenger vehicle. Journal of Applied Science, 2018. pp. 1-9. ISSN 1812-5654 E-ISSN 1812-5662 (In Press)

Rahman, Mohammed Ataur and Aung, Kya Myo (2018) Modelling and simulation of graphene/palladium catalyst reformer for hydrogen generation from the waste of IC engine. IOP Conference Series: Materials Science and Engineering, 290. pp. 2-13. ISSN 1757-899X

Rahman, Mohammed Ataur and Mohammed, Azri and Kyaw, Myo Aung and Ismail, Ahmad Faris and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2018) Prospect and challenges of electric vehicle adaptability: an energy review Malaysia. Energy Education Science and Technology Part A:Energy Science and Research, 36 (3). pp. 139-151. ISSN 1308-772X

Rahman, Mohammed Ataur and Saifullah, Khalid and Sany, Ihsan and Aung, Kyaw Myu and Ismail, Ahmad Faris and Ihsan, Sany Izan (2018) Nano conductive filler polymer towards energy efficient EV: A review. Energy Education Science and Technology Part A: Energy Science and Research, 36 (3). pp. 185-204. ISSN 1308-772X

Rahman, Tawfikur and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Alam, A. H. M. Zahirul and Mostafa, Mohammad Golam and Rahman, M. Wahidur (2018) Carrier based synchronous control and performance analysis of an S-PSI using PV for microgrid applications. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Rahmat, Nopia and Mohamad, Hafiz and Mel, Maizirwan (2018) Upgrading biogas by membrane contactor separation. Journal of Advanced Research in Biofuel and Bioenergy, 3 (1). pp. 19-26. ISSN 2600-8459

Raja Seman, Raja Noor Amalina and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2018) Graphene/transition metal dichalcogenides hybrid supercapacitor electrode: status, challenges, and perspectives. Nanotechnology, 29 (50). ISSN 0957-4484 E-ISSN 1361-6528

Rakhimov, Abdumalik (2018) Localization of the spectral expansions associated with the partial differential operators. In: Mathematical Methods in Engineering : Theoretical Aspects. Nonlinear Systems and Complexity (23). Springer, Cham, Switzerland AG, pp. 217-233. ISBN 978-3-319-91064-2

Rakhimov, Abdumalik (2018) On the summability of the spectral expansions associated with the elliptic differential operators. In: 3rd International Conference on Mathematical Sciences and Statistics, 6th–8th February 2018, Putrajaya.

Rakhimov, Abdumalik and Mohd Aslam, Siti Nor Aini (2018) Uniform convergence of the eigenfunction expansions associated with the bi-harmonic operator on the closed domain. In: 25th National Symposium on Mathematical Sciences: Mathematical Sciences as the Core of Intellectual Excellence, SKSM 2017, 27 - 29 August 2017, Kuantan, Pahang.

Rakhimov, Abdumalik and Mohd Aslam, Siti Nor Aini (2018) Uniform convergence of the eigenfunction expansions of distributions associated with the polyharmonic operator on closed domain. In: 4th International Conference on Mathematical Applications in Engineering 2017, ICMAE 2017, 8th-9th of August 2017, Kuala Lumpur, Malaysia.

Ramesh, Singh and Zulkifli, Nurin Wahidah and Tan, Chou Yong and Wong, Yinhow and Tarlochan, Faris and Ramesh, S. and Teng, W. D. and Sopyan, Lis and Bang, Le Thi and Sarhan, Ahmed A.D. (2018) Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia. Ceramics International, 44 (8). pp. 8922-8927. ISSN 0272-8842

Ramli, Muhammad Faiz and Shamsudin, Syariful Syafiq and Legowo, Ari (2018) Safe avoidance path detection using multi sensor integration for small unmanned aerial vehicle. In: 5th IEEE International Workshop on Metrology for AeroSpace, MetroAeroSpace 2018, 20 - 22 June 2018, Rome; Italy.

Ramli, Nurul Izzati and Abd-Wahab, Firdaus and Wan Salim, Wan Wardatul Amani (2018) Characterization of enzymatic glucose biosensor in buffer solution, in artificial saliva, and in potassium ferricyanide by linear sweep voltammetry. In: 3rd International Sciences, Technology & Engineering Conference (ISTEC) 2018 - Material Chemistry, 18th April 2018, Penang, Malaysia.

Ramli, Nurul Izzati and Ismail, Nur Alya Batrisya and Abd. Wahab, Mohd. Firdaus and Wan Salim, Wan Wardatul Amani (2018) Cyclic voltammetry and electrical impedance spectroscopy of electrodes modified with PEDOT:PSS-reduced graphene oxide composite. In: Transparent conducting films. Intech Open, London, United Kingdom, pp. 1-10. (In Press)

Rasedee, Ahmad Fadly Nurullah and Rakhimov, Abdumalik and Akhmedov, Anvarjon (2018) Summation by riesz means of the fourier-laplace series. Filomat, 32 (3). pp. 837-846. ISSN 0354-5180

Rashid, A. A. and Sidek, Atiah Abdullah and Suffian, S. A. and Che Daud, Mohd Radzi (2018) Environmental management competitive pressure effect on SME environmental innovation activities: A green supply chain perspective. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Rashid, Mohammed Abdur N. and Khan, Sher Afghan and Muhamad Khairussaleh, Nor Khairusshima and Sarifuddin, Norshahida (2018) Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2930-2934. ISSN 1819-6608

Rashid, Muhammad Mahbubur and Al Mamun, Abdullah and Jaafar, Abdul Hassan and Mollik, Md. Sajib (2018) Development of non-contact liquid level measurement and data storage system. International Journal of Engineering Materials and Manufacture, 3 (3). pp. 134-142. E-ISSN 0128-1852

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2018) Cancer histopathologic subtypes prediction from miRNA expression data using pattern recognition. Journal of Informatics and Mathematical Sciences. ISSN 0974-875X E-ISSN 0975-5748 (In Press)

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2018) Cancer relapse prediction from microrna expression data using machine learning. In: 3rd Current Research on Information Technology, Mathematics Sciences, Science and Technology (CRIMSTIC 2018), 27th-29th April 2018, Bandar Hilir, Melaka. (Unpublished)

Razali, Nurul Nabilah and Sopyan, Lis (2018) Incorporation of poly(Vinyl alcohol) for the improved properties of hydrothermal derived calcium phosphate cements. Indonesian Journal of Chemistry, 18 (2). pp. 354-361. ISSN 1411-9420

Razali, Nurul Nadirah and Sukardi, Mohd Amirul and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md Mujibur (2018) The effects of excess calcium on the handling and mechanical properties of hydrothermal derived calcium phosphate bone cement. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Reza, Asif and Islam, Md. Rafiqul and Abdullah, Khaizuran and Raisa, Farah (2018) Interference avoidance using dynamic frequency reuse for LTE-A system. International Journal of Engineering & Technology, 7 (3.7). pp. 1-3. ISSN 2227-524X

Roslan, Muhamad Fahmi Mohd and Shaffiar, Norhashimah and Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2018) Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Gombak, Kuala Lumpur.

Rosli, Rafhanah Shazwani and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2018) Characteristic analysis of received signal strength indicator from ESP8266 WiFi transceiver module. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Rosli, Rafhanah Shazwani and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2018) Comparative analysis of digital filters for received signal strength indicator. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Roslin, Raihan Jannati and Khalifa, Othman Omran and Bhuiyan, Sharif Shah Newaj (2018) Improved voice over Internet protocol for wireless devices. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

S

Saad, Siti Asmahani and Shafiq, Nasir and Ali, Maisarah and Mohamed Osman, Mariana (2018) Analysis by means of surface response to chemical composition and pozzolanic reactivity of Ultrafine Treated Rice Husk Ash (UFTRHA) as cementing additive material. In: International Graduate Conference on Energy, Engineering & Technology 2018 (iGRAD2018), 4th-6th September 2018, Putrajaya, Malaysia. (Unpublished)

Saad, Siti Asmahani and Shafiq, Nasir and Ali, Maisarah and Mohamed Osman, Mariana (2018) Analysis by means of surface response to chemical composition and pozzolanic reactivity of ultrafine treated rice husk ash (UFTRHA) as cementing additive material. International Journal of Engineering and Technology(UAE), 7 (4). pp. 342-346. ISSN 2227-524X

Saad, Siti Asmahani and Shafiq, Nasir and Mohamed Osman, Mariana and Masjuki, Siti Aliyyah (2018) Compressive strength and microstructure analysis of treated rice husk ash (TRHA) incorporated mortar. In: International Graduate Conference on Energy, Engineering & Technology 2018 (iGRAD2018), 4th-6th September 2018, Putrajaya, Malaysia. (Unpublished)

Sadai, Haruna and Shimoizu, Kazuya and Iwasaki, Tomohiro and Yabuta, Nobuyasu and Jami, Mohammed Saedi and Iwata, Masashi (2018) Electrokinetic response of solid-liquid mixture during filtration and expression. In: European Conference on Fluid-Particle Separation (FPS 2018), 15th-17th October, 2018, Lyon, France. (Unpublished)

Saidin, Norazlina and Idris, N. F. and Amaluddin, M. N. and Irawati, Ninik and Md Ralib, Aliza Aini and Harun, Sulaiman Wadi (2018) Microfiber-based sensor for measuring uric acid concentrations. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-7). pp. 49-52. ISSN 2180-1843 E-ISSN 2289-8131

Saied, Muna H. and Shuriye, Abdi Omar (2018) Kuwaiti government initiatives and efforts towards nationalizing labor market. Australian Journal of Islamic Studies, 9. pp. 5-35. ISSN 1834-6170 E-ISSN 2208-469X

Salami, Ifedabo Abdullahi and Abdul Malik, Noreha and Habaebi, Mohamed Hadi and Salami, Ahmed Babajide (2018) Miniaturized turbine flow sensor: design and simulation. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Saleel, Ahmed and Baig, Maughal Ahmed Ali and Khan, Sher Afghan (2018) Experimental investigation of the base flow and base pressure of sudden expansion nozzle. In: International Conference on Aerospace and Mechanical Engineering (AeroMech17), 21st-22nd November 2017, Batu Ferringhi, Penang.

Salleh, Hafiz and Saharin, Sanisah and Azmi, Mohammad Hanafi and Khan, Sher Afghan (2018) Fluid-structure interactions of variable span wings in low Reynold flows. International Journal of Engineering & Technology, 7 (3.29). pp. 381-385. ISSN 2227-524X

Sallehudin, Nor Jannah and Ahmad Raus, Raha and Mustapa, Mokhzanni and Othman, Rashidi and Mel, Maizirwan (2018) Screening of lutein content in several fresh-water microalgae. International Food Research Journal, 25 (6). pp. 2307-2312. ISSN 1985-4668 E-ISSN 2231-7546

Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. International Journal of Engineering & Technology, 7 (4014). pp. 339-342. ISSN 2227-524X

Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. In: 2nd International Conference on Applied Sciences and Industrial Technology (ICASIT 2018), 14th-15yh November 2018, Melaka. (Unpublished)

Samat, Noorasikin and Motsidi, Siti Nor Rasyidah and Mohd Lazim, Nurul Hakimah (2018) Effects of electron beam radiation dose on the compatibilization behaviour in recycled polypropylene/microcrystalline cellulose composites. IOP Conference Series: Materials Science and Engineering, 290. pp. 1-6. ISSN 1757-8981 E-ISSN 1757-899X

Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Arifin, Mohd Azmir and Mel, Maizirwan and Mohd. Salleh, Hamzah (2018) Surface modification of microporous polycaprolactone (PCL) microcarrier to improve microcarrier biocompatibility. In: International Conference on Halal Innovations in Products and Services 2018 (i-CHIPS 2018), 13th -14th July 2018, Songkla, Thailand.

Saputra, Irwan and Jaswir, Irwandi and Akmeliawati, Rini (2018) Identification of pig adulterant in mixture of fat samples and selected foods based on FTIR-PCA wavelength biomarker profile. International Journal on Advanced Science, Engineering and Information Technology, 8 (6). pp. 2341-2348. ISSN 2088-5334 E-ISSN 2460-6952

Saputra, Irwan and Jaswir, Irwandi and Akmeliawati, Rini (2018) Profiling of wavelength biomarkers of pure meat samples from different species based on Fourier transform infrared spectroscopy (FTIR) and PCA techniques. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1617-1624. ISSN 2088-5334

Sarifuddin, Norshahida and Ahmad A. Shahrim, Nur’Aishah and Azman, K.S (2018) Effect of oregano essential on the properties of mango kernel starch films. In: International Conference on Advanced Manufacturing and Industry Applications, ICAMIA 2018, 15th-17th August 2018, Kuching, Sarawak.

Sarifuddin, Norshahida and Shaari, Mohammad Anuar Zaki and Ahmad Shahrim, Aishah and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim (2018) Effect of banana peel fiber as reinforcement in low density polyethylene/durian seed starch blends. International Journal of Current Research in Science & Technology, Special issue. pp. 191-196. E-ISSN 2581-4311

Sarifuddin, Norshahida and Shahrim, N.A. and Rani, N. N.S.A. and Zaki, H. H.M. and Ahmad Azhar, Ahmad Zahirani (2018) Preparation and characterization of jackfruit seed starch/poly (vinyl alcohol) (PVA) blend film. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Saud FEMD Alazemi, Saud and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2018) Indentation mechanism in rotary hammer forging process: analytical and numerical approach. International Journal of Engineering Materials and Manufacture, 3 (4). pp. 190-199. E-ISSN 0128-1852

Sediono, Wahju (2018) 2-Channel AVM System: software tool for calibration. In: Research Dissemination in Computer Science 2018, 30th Nov. 2018, Depok, Indonesia. (Unpublished)

Selvan, Krishna Veni and Rehman, Tariq and Saleh, Tanveer and Mohamed Ali, Mohamed Sultan (2018) Copper–cobalt thermoelectric generators: power improvement through optimized thickness and sandwiched planar structure. IEEE Transactions on Electron Devices, 66 (8). pp. 3459-3465. ISSN 0018-9383 E-ISSN 1557-9646

Setyobudi, Roy Hendroko and Krido Wahono, Satriyo and Gamawati Adinurani, Praptiningsih and Wahyudi, Ahmad and Widodo, Wahyu Eko and Mel, Maizirwan and Adhi Nugroho, Yogo and Prabowo, Bayu and Liwang, Tony (2018) Characterisation of Arabica coffee pulp - Hay from kintamani - Bali as prospective biogas feedstocks. In: 3rd International Conference on Electrical Systems, Technology and Information, ICESTI 2017, 26 - 29 September 2017, Mercure Bali HarvestlandDenpasar, Bali; Indonesia.

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Computation of stability derivatives of an oscillating cone for specific heat ratio = 1.66. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang.

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Effect of semi vertex angle on stability derivatives for an oscillating cone for constant value of specific heat ratio. International journal of Engineering & Technology, 7 (3.29). pp. 386-390. ISSN 2227-524X

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Estimation of stability derivatives in newtonian limit for oscillating cone. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21-22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Shah, Jawad and Okasha, Mohamed and Faris, Waleed Fekry (2018) Gain scheduled integral linear quadratic control for quadcopter. International Journal of Engineering and Technology, 7 (4.13 (Special issue 13)). pp. 81-85. ISSN 2227-524X

Shahbuddin, Munira (2018) Issues and challenges in the development of three-dimensional model for thyroid cancer. In: International Conference Biotechnology Engineering, ICBioE ‘18 September 19-20, 2018,, 19th-20th September 2018, Kuala Lumpur, Malaysia.

Shahbuddin, Munira and Abdul Rahim, Muhammad Muiz and Jami, Mohammed Saedi and Abdullah Sani, Muhammad Shirwan and Jaswir, Irwandi (2018) Development of ready to use therapeutic food for the treatment of malnutrition. In: 20th IMAM Annual Scientific Conference, 27th-30th September 2018, Shah Alam, Selangor. (Unpublished)

Shahbuddin, Munira and Bullock, Anthony J. and Rimmer, Stephen and MacNeil, Sheila (2018) KGM hydrogels inhibit the contraction of tissue engineered skin and stimulate the proliferation of fibroblasts in the dermal area. In: 17th International Conference of Asia Pacific Association of Surgical Tissue Banks (APASTB) 2018, 27th-30th 2018, Putrajaya. (Unpublished)

Shahbuddin, Munira and Raus, Raha Bt. Ahmad and Ramli, Nur Amalina and Adel, Nahla and Jami, Mohammed Saedi and Zainuddin, Zaki (2018) The use of effective microorganisms (EM) for pretreatment of wet market wastewater. In: International Conference Biotechnology Engineering, ICBioE ‘18, 19th-20th September 2018, Kuala Lumpur.

Shahlan, M. Z. and Sidek, Ayu Aszliana and Suffian, S A and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi (2018) An examination on the influence of small and medium enterprise (SME) stakeholder on green supply chain management practices. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Shaikh, Faraz Ahmed and Khan, Sheroz and Abdul Rahman, Farah Diyana and Yusoff, Siti Hajar and Alam, A. H. M. Zahirul and Badron, Khairayu and Shahid, Zeeshan (2018) Improved radiation characteristic of balanced antipodal vivaldi antenna in array configuration. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018, 20th-21st March 2018, Kuala Lumpur. (Unpublished)

Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Baillargeat, Dominique and Habaebi, Mohamed Hadi and Yaacob, Mashkuri and Shah, Jawad Ali and Shahid, Zeeshan (2018) Comparative analysis of UWB balance Antipodal Vivaldi Antenna for array configuration. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018), 19th-20th September 2018, Kuala Lumpur.

Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Hassan Abdalla Hashim, Aisha and Badron, Khairayu and Yaacob, Mashkuri (2018) High gain UWB horn antenna for concealed metal detection and microwave imaging application. Sindh University Research Journal (Science Series), 50 (3D). pp. 161-164. ISSN 1813-1743

Shaikh, Faraz Ahmed and Khan, Sheroz and Zaharudin, Zarimin and Alam, A. H. M. Zahirul and Abdul Rahman, Farah Diyana and Badron, Khairayu and Baillargeat, Dominique and Yaacob, Mashkuri and Shahid, Zeeshan (2018) Recognition of metal objects inside wall using antipodal vivaldi antenna. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). pp. 27-35. ISSN 2502-4752

Shaikh, Faraz Ahmed and Khan, Sheroz and Zaharudin, Zarimin and Alam, A. H. M. Zahirul and Yaacob, Mashkuri and Shahid, Zeeshan and Abdul Rahman, Farah Diyana and Badron, Khairayu (2018) Design and optimization of ultra-wideband antipodal vivaldi antenna for radar and microwave imaging application. Sindh University Research Journal (Science Series), 50 (3D). pp. 6-9. ISSN 1813-1743

Shaikh, Faraz Ahmed and Khan, Sheroz and Zaharudin, Zarimin and Alam, Zahirul and Abdul Rahman, Farah Diyana and Badron, Khairayu and Yaacob, Mashkuri and Shahid, Zeeshan and Shaikh, Humaiz and Ahmed, Syed Faiz (2018) Detection and analysis of metal impairment inside wall using UWB modified antipodal vivaldi antenna. In: 2017 4th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS), 29th Nov. - 1st Dec. 2017, Salmabad, Bahrain.

Shanbhag, Pavitra and S., Lavanya and Khan, Sher Afghan (2018) Stability derivatives of a oscillating wedges in viscous hypersonic flow. In: 1st International Conference on Aerospace and Mechanical Engineering (AeroMech 2017), 21st-22nd Nov. 2017, Pulau Pinang.

Sharmin, Afsah and Anwar, Farhat and Motakabber, S. M. A. (2018) A noble approach of ACO algorithm for WSN. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Shayea, Ibraheem and Abdul Rahman, Tharek and Hadri Azmi, Marwan and Islam, Md. Rafiqul (2018) Real measurement study for rain rate and rain attenuation conducted over 26 GHz microwave 5G link system in Malaysia. IEEE Access, 6. pp. 19044-19064. ISSN 2169-3536

Shuriye, Abdi Omar (2018) مؤتمر ديريطوا الدولي حول السلام والتنمية: المتحدث الرئيسي. In: "المؤتمر الدولي السنوي "للجبهة المتحدة لتحرير الصومال الغربي, 30th July - 5th Aug, 2018, Ethiopia. (Unpublished)

Shuriye, Abdi Omar (2018) Islamic workshop in Hong Kong. In: An Academic Discourse on Islam, Sciences, Ethics and Politics, 24th-26th February 2018, University of Hong Kong. (Unpublished)

Shuriye, Abdi Omar (2018) Keynote address Seminar on Political Situation in East Africa. In: National Seminar on Politics and Education in East Africa 2018, 9th-11th Aug. 2018, Republic of Somaliland. (Unpublished)

Shuriye, Abdi Omar (2018) Keynote speech on Intellectual Day & Global Ummatic Festival Public Talk 2018. In: Intellectual Day & Global Ummatic Festival Public Talk 2018, 22nd Nov. 2018, Kuala Lumpur. (Unpublished)

Shuriye, Abdi Omar (2018) National Seminar on Religion, Politics and Multiculturalism. In: National Seminar on Religion, Politics and Multiculturalism 2018, 11th-13th Oct. 2018, New Zealand. (Unpublished)

Shuriye, Abdi Omar (2018) Understanding the nature of ISIS. International Journal of Humanities and Social Science, 8 (7). pp. 130-134. ISSN 2220-8488 E-ISSN 2221-0989

Siddique, Istiaq Jamil and Bahar, R. and Ibrahim, Shaliza and Al Hazza, Muataz Hazza Faizi (2018) Performance of combined PTFE hydrophilic and hydrophobic membrane during laundry/detergent wastewater treatment by air gap membrane distillation (AGMD): an experimental study. Desalination and Water Treatment, 127. pp. 255-261. ISSN 1944-3994 E-ISSN 1944-3986

Siddiqui, Naseeb and Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Sulaeman, Erwin (2018) Experimental investigation of a new spiral wingtip. International Journal of Aviation, Aeronautics, and Aerospace, 5 (2). pp. 1-32. ISSN 2374-6793

Sidek, Khairul Azami and Abd Halim, Noor Hafizah Azlin and Abdullah Din, Ummi Nur Kamilah and Ismail, Ahmad Fadzil (2018) Study of emotional variability using photoplethysmogram signal. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 1-6. ISSN 2180-1843 E-ISSN 2289-8131

Sidek, Khairul Azami and Kamaruddin, Nur Khaleda Naili and Ismail, Ahmad Fadzil (2018) The study of PPG and APG signals for biometric recognition. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 17-20. ISSN 2180-1843 E-ISSN 2289-8131

Sidek, Khairul Azami and Shariff, Nur Amirah and Alam, Md Nasibul and Hashim, Nuradilah and Ismail, Ahmad Fadzil (2018) Lie detection using acceleration plethysmography signal. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 7-10. ISSN 2180-1843 E-ISSN 2289-8131

Sidek, Shahrul Naim and Roslan, Muhammad Rozaidi and Sidek, Sabrilhakim and Mohd Khalid, Mohd Shukry (2018) Thumb-tip force prediction based on hill’s muscle model using electromyogram and ultrasound signal. International Journal of Computational Intelligence Systems, 11 (1). pp. 238-247. ISSN 1875-6891 E-ISSN 1875-6883

Sinaga, Nazaruddin and Hatta, Kurnia and Ahmad, Nurjehan Ezzatul and Mel, Maizirwan (2018) Effect of Rushton impeller speed on biogas production in anaerobic digestion of continuous stirred bioreactor. Journal of Advanced Research in Biofuel and Bioenergy, 3 (1). pp. 9-18. ISSN 2600-8459

Sinaga, Nazruddin and Nasution, Syukran Bestari and Mel, Maizirwan (2018) Process optimization of biogas production from palm oil mill effluent: a case study of a crude palm oil factory in Muaro Jambi, Indonesia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (2). pp. 155-169. ISSN 2289-7879

Sophian, Ali (2018) Transient Eddy Current NDT: theory, applications and research. In: Malaysia International NDT Conference and Exhibition 2018 (MINDTCE’18), 12th-13th Nov. 2018, Sunway Pyramid, Kuala Lumpur. (Unpublished)

Suffian, S. A. and Abdullah Sidek, 'Atiah and Md. Yusof, Hazlina and Al Hazza, Muataz Hazza Faizi (2018) Inventory data on commercial broiler chicken production system using life cycle assessment approach: A case study. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Suhaimi, Farahana and Htike@Muhammad Yusof, Zaw Zaw (2018) Feature map size selection for fMRI classification on end-to-end deep convolutional neural networks. International Journal of Advanced and Applied Sciences, 5 (8). pp. 95-103. ISSN 2313-626X E-ISSN 2313-3724

Suhaimi, N.H.S and Badron, Khairayu and Ismail, Ahmad Fadzil and Ahmad, Yasser Asrul and Rahmat, M.H. (2018) Determination of fade margin for Ka band operating in equatorial region. Journal of Fundamental and Applied Sciences, 10 (2S). pp. 229-238. ISSN 1112-9867

Sukindar, Nor Aiman and Ab Tahir, Aliff (2018) Risk assessment on plan layout for project mechanical workshop in Politeknik Kuching Sarawak. In: 3rd National Research and Innovation Conference (NRICon2018), 19th September 2018, Kuching, Sarawak.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Analysis of mechanical properties of polylactic acid using a new 3D printer nozzle. Journal of Computational and Theoretical Nanoscience, 15 (2). pp. 666-675. ISSN 1546-1955 E-ISSN 1546-1963

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Effects of nozzle die angle on extruding polymethylmethacrylate in open-source 3D printing. Journal of Computational and Theoretical Nanoscience, 15 (2). pp. 663-665. ISSN 1546-1955 E-ISSN 1546-1963

Suksuwan, Wasu and Wae-Hayee, Makatar and Mel, Maizirwan (2018) Development of mini pilot fluidized bed gasifier for industrial approach: Preliminary study based on continuous operation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 35-43. ISSN 2289-7879

Suksuwan, Wasu and Wae-hayee, Makatar and Mel, Maizirwan (2018) The effect of single and double air inlets on swirling flow in a reactor of a fluidized bed gasifier. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 157-166. ISSN 2289-7879

Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Badran, Marwan A A (2018) Trilinear finite element solution of three dimensional heat conduction partial differential equations. International Journal of Engineering & Technology (UAE), 7 (4.36). pp. 379-384. ISSN 2227-524X

Sulaiman, Mohd Hafis and Christiansen, P. and Bay, N. (2018) Measurement of compressibility by means of pressure-bulk modulus relationship for low-to-high viscosity oils. In: Asia International Conference on Tribology 2018, Kuching, Sarawak.

Sulaiman, Sarina (2018) Identification of fatty acid methyl ester in palm oil using gas chromatography-mass spectrometer. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 63-74. ISBN 978-981-13-2256-3

Sulaiman, Sarina and Talha, Nur Syakirah (2018) Technique to produce catalyst from egg shell and coconut waste for biodiesel production. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 83-92. ISBN 978-981-13-2256-3

Suliman, S.H. and Hashim, W. and Ismail, Ahmad Fadzil and Zakariya, Mohd Azman and Yahya, A.S. and Sauti, M.S. (2018) Measurements of mobile signal received power level at Ringlet, Cameron Highland, Malaysia. International Journal of Engineering & Technology, 7 (4.35). pp. 404-409. ISSN 2227-524X

Suryanto, - and Ani, Mohd Hanafi and Yaacob, Iskandar Idris and Haider I., Farag (2018) FUNDAMENTAL STUDY ON METAL DUSTING PREVENTION OF AISI 316 STAINLESS STEELS BY USING COPPER COATING. Project Report. UNSPECIFIED. (Unpublished)

Sutjipto, Agus Geter Edy and Mazwir, M. H. and Yee, H. L. and Misskon, S. R. and Shaitir, A. G.M. and Jusoh, Mohamad Ashry and Othman, Raihan (2018) Effect of compaction pressure of green body and heating current on photoluminescence property of ZnO crystal grown by electric current heating method. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.

Syed Mohamed Ali, Jaffar and Ali, Mir Owais and Riyadh, Miah Mohammed (2018) Educational software for stress analysis of non-idealized closed thin-walled sections. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Masturah, Mohamad (2018) Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 9-17. E-ISSN 0128-1852

Syed Mohamed Ali, Jaffar and Nur Fadhila, Hasna and Makame, Burhani and Riyadh, Miah Mohammed (2018) Educational software for stress analysis of idealized closed thin walled sections. In: International Conference on Aviation Technology and Management (ICATEM2018), 12th-14th Sept. 2018, Kuala Lumpur. (Unpublished)

Syed Mohamed Ali, Jaffar and Omar, Ashraf Al and Nasikin, Mohd Faiz Diuzzaman (2018) Numerical and experimental study on the effect of cab-extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, xx (xx). pp. 1-8. ISSN 2289-7879 (In Press)

Syed Putra, Sharifah Shahira and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Sulaiman, Sarina and Jamal, Parveen and Ahmad Nor, Yusilawati (2018) Surface functionalisation of Microfibrillated Cellulose (MFC) of cocoa pod husk with Ƴ-Methacryloxypropyltrimethoxysilane (MPS). In: The 3rd International Conference on Green Chemical Engineering and Technology (GCET 2017), 7th-8th Nov. 2017, Swiss-Garden Hotel Melaka.

T

Talha, Nur Syakirah and Sulaiman, Sarina (2018) In situ transesterification of solid coconut waste in a packed bed reactor with CaO/PVA catalyst. Waste Management, 78. pp. 929-937. ISSN 0956-053X

Tanasta, Z. and Muhamad, Pauziah and Kuwano, Noriyuki and Mohd Yatim, Norfazrina Hayati and Unuh, Mohd Hishamuddin (2018) Reduction of defects on microstructure aluminium nitride using high temperature annealing heat treatment. In: 3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering 2017, ICMMPE 2017, 22nd–23rd November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Tanbin, Suriyea and Ogu Salim, Nurhainis and Ahmad Fuad, Fazia Adyani (2018) Analogues of 2-Deoxyglucose as inhibitor candidates for hexokinase II identified via virtual screening analyses. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Tasnim, Rumana and Khan, Sheroz and Arshad, Atika and Hussein, Molla Rashied (2018) Non-contact capacitive technique for biomass flow sensing. Indonesian Journal of Electrical Engineering and Computer Science, 11 (2). pp. 531-541. ISSN 2502-4752

Taufik, Ichsan and Syaripudin, Undang and Kaffah, Faiz M. and Ismail, Nanang and Sobirin, Jaka Giri and Gunawan, Teddy Surya (2018) Concealment of files blocked by Gmail with EOF-based image steganography. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 716-721. ISSN 2502-4752

Thriumani, Reena and Zakaria, Ammar and Hashim, Yumi Zuhanis Has-Yun and Jeffree, Amanina Iymia and Helmy, Khaled Mohamed and Kamarudin, Latifah Munirah and Omar, Mohammad Iqbal and Md Shakaff, Ali Yeon and Adom, Abdul Hamid and Persaud, Krishna C. (2018) A study on volatile organic compounds emitted by in-vitro lung cancer cultured cells using gas sensor array and SPME-GCMS. BMC Cancer, 18 (1). pp. 1-17. ISSN 1471-2407

Tohtayong, Majdee and Khan, Sheroz and Yaacob, Mashkuri and Mohamud Ahmed, Musse and Yusoff, Siti Hajar and Midi, Nur Shahida (2018) Modulation indices embedded carrier-based PWM generation for modular multilevel converter. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018, 20th-21st March 2018, Kuala Lumpur. (Unpublished)

Tursunov, Ikromjon Gulamovich and Okhunov, Abdurahim and Mamatkarimov, Odiljon Oxundadaevich (2018) About the silicon sensitivity of the deep level with alternating pressure. IIUM Engineering Journal, 19 (2). pp. 164-171. ISSN 1511-788X E-ISSN 2289-7860

U

Uba, Muhammad Abdulazeez and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Representative Nigerian anthropometric data for automotive applications. Journal of Mechanical Engineering, 5 (Specialissue 4). pp. 68-88. ISSN 1823-5514

Uddin, M.N. and Rashid, Muhammad Mahbubur and Taweekun, J. and Techato, K. and Roy, R. and Rahman, M.A. (2018) Investigation on producing silica from rice husk biomass. International Journal of Renewable Energy Resources, 8 (1). pp. 12-23. ISSN 2289-1846

Ulaganathen, Kesavan and Abdul Rahman, Tharek and Islam, Rafiqul and Abdullah, Khaizuran (2018) Rain attenuation for 5G network in tropical region (Malaysia) for terrestrial link. In: 13th IEEE Malaysia International Conference on Communications, MICC 2017, 28 - 30 November 2017, The Puteri Pacific Johor Bahru.

Ulaganathen, Kesavan and Islam, Md. Rafiqul and Abdullah, Khaizuran and Abdul Rahman, Tharek (2018) Specific rain attenuation analysis and modeling For 5G communication. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Unuh., M. H. and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati and Ismail, Mohamad Amiruddin (2018) Vibration isolation analysis of new design OEM damper for malaysia vehicle suspension system featuring MR fluid. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

W

Wahid, Zaharah (2018) Enhancement of productivity of manual operation of soya sauce factory. In: 7th International Conference on Engineering Business Management (ICEBM), 4th-5th August 2018, Kuala Lumpur. (Unpublished)

Wahid, Zaharah (2018) Introduction to design of experiments. In: Workshop on Mathematical Modelling 2018, 4th-5th July 2018, Kuala Lumpur. (Unpublished)

Wahid, Zaharah (2018) Simultaneous optimization of multiple response variables using desirability function. In: The 9th International conference on Numerical Optimization & Operation Research, 27th-29th August 2018, Chiang Mai ,Thailand. (Unpublished)

Wahid, Zaharah (2018) A review on Halal food products and services in Malaysia: impact of food safety standards and regulations. In: International Conference on Halal Innovation in Products and Services 2018 (i-CHIPS 2018), 13th-14th July 2018, Haat Yai, Songkhla, Thailand.

Wan Fauzi, Wan Noor Nadira and Mazli, Mohamad Syafiq and Khan, Sheroz and Adnan, Khairil Azhar and Aboadla, Ezzidin Hassan Elmabrouk and Tohtayong, Majdee and Yaacob, Mashkuri (2018) Beaming of inductive field with an asymmetric four-coil resonator for wireless power transfer. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, Kuala Lumpur.

Wan Mat, W. N. F. and Ahmad Zabidi, Suriza (2018) Implementation of green technology system in a classroom. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, International Islamic University Malaysia (IIUM), Gombak, Kuala Lumpur.

Wan Morshidi, Wan Hafiy and Zaharudin, Zarimin and Khan, Sheroz and Nordin, Anis Nurashikin and Shaikh, Faraz Ahmed and Adam, Ismail and Abdul Kadir, Kushsairy (2018) Inter-digital sensor for non-invasive blood glucose monitoring. In: 2018 IEEE International Conference on Innovative Research and Development (ICIRD 2018), 11th-12th May 2018, Bangkok, Thailand.

Wan Osmani, Sharifah Nur Aqilah and Ali, Fathilah and Adli, Sarah Amalina (2018) Effect of acid hydrolysis treated pineapple fiber in plasticized polylactic acid composite. Journal of Advanced Research in Materials Science, 50 (1). pp. 14-18. ISSN 2289-7992

Wan Osmani, Sharifah Nur Aqilah and Ali, Fathilah and Adli, Sarah Amalina (2018) Effect of acid hydrolysis treated pineapple fiber in plasticized polylactic acid composite. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Wan Sabr, Wan Muhd Arif and Zabidi, Irfan Rahim and Abd Musthalib, Mohd Aliff and Muhamad, Zimam Amer and Mohd Hazman, Muhammad Irfan and Mohd Yusof, Muhammad Syafiq and Naing, Lwinthein and Zainal Abidin, Zulkifli (2018) Low-cost remotely operated underwater vehicle for underwater observation purposes. In: 7th IEEE International Conference on Underwater System Technology: Theory and Applications, USYS 2017, 18 - 20 December 2017, Menara Razak, UTM Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza (2018) Product development and cost analysis of fabricating the prototype of roller clamp in intravenous (I.V) tubing medical devices using fused deposition modeling (FDM) technology. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Wirawan, Nanda and Abdullah, Nur Azam and Akbar, Mahesa and Curiel-Sosa, J.L. (2018) Analysis on cracked commuter aircraft wing under dynamic cruise load by means of XFEM. In: Modern Practice in Stress and Vibration Analysis (MPSVA) 2018, 2nd-4th July 2018, Cambridge, UK.

Y

Yahya, A.S. and Hashim, Wahidah and Ismail, Ahmad Fadzil and Sulaiman, S.H. and Sulaiman, M.F. (2018) CubeSat: LEO mission control unit potential communication concept for AMR system. International Journal of Recent Technology and Engineering (IJRTE), 7 (4S2). pp. 346-349. ISSN 2277-3878

Yahya, Sitti Rachmawati and Omar, Khairuddin and Sheikh Abdullah, Siti Nurol Huda and Sophian, Ali (2018) Image enhancement background for high damage Malay manuscripts using adaptive threshold binarization. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1552-1564. E-ISSN 2088-5334

Yosri, M. H. and Muhamad, Pauziah and Ismail, Mohamad Amiruddin and Mohd Yatim, Norfazrina Hayati (2018) Air ionizer application for electrostatic discharge (ESD) dust removal in automotive painting industry. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Yunos, Muhammad Farhan Affendi and Nordin, Anis Nurashikin and Khan, Sheroz (2018) Simulation of RF patch antenna sensor for biological applications. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur.

Yusof, Faridah and Chowdhury, Silvia and Sulaiman, Nadzril and Faruck, Mohammad Omer (2018) Effect of process parameters on the synthesis of silver nanoparticles and its effects on microbes. Jurnal Teknologi, 80 (3). pp. 115-121. E-ISSN 2180-3722.

Yusof, Faridah and Khanahmadi, Soofia (2018) Carrier-free enzyme immobilization by cross-linked enzyme aggregates (CLEA) technology. In: Multifaceted protocol in biotechnology. Springer Nature, Singapore, pp. 93-108. ISBN 978-981-13-2256-3

Yusof, M. Q.M. and Harun, H. N.S.B. and Bahar, Rubina (2018) Experimental investigation of minimum quantity lubrication in meso-scale milling with varying tool diameter. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Yusof, Nurlina and Jaswir, Irwandi and Jamal, Parveen and Jami, Mohammed Saedi (2018) Texture Profile Analysis (TPA) of the jelly dessert prepared from Halal gelatin extracted using High Pressure Processing (HPP). In: International Conference on Halal Innovation in Products and Services 2018 (i-CHIPS 2018), 13th-14th July 2018, Haat Yai, Songkhla, Thailand.

Yusoff, Siti Hajar and Abdullah Din, Ummi Nur Kamilah and Mansor, Hasmah and Midi, Nur Shahida and Zaini, Syasya Azra (2018) Design of smart waste bin and prediction algorithm for waste management in household area. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 748-758. ISSN 2502-4752

Yusoff, Siti Hajar and Abdullah Din, Ummi Nur Kamilah and Mansor, Hasmah and Midi, Nur Shahida and Zaini, Syasya Azra (2018) Neural network prediction for efficient waste management in Malaysia. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 738-747. ISSN 2502-4752

Yusoff Sayuti, Nurul Hidayah and Jimat, Dzun Noraini and Azmi, Azlin Suhaida and Ahmad Raus, Raha and Amid, Azura and Jamal, Parveen (2018) Isolation and screening of newly isolated bacteria producing nanocellulose from rotten banana skin and sugarcane bagasse. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Yusop, N. S. and Nordin, Anis Nurashikin and Khairi, M. Azim and Hasbullah, Nurul Fadzlin (2018) The impact of scaling on single event upset in 6T and 12T SRAMs from 130 to 22 nm CMOS technology. Radiation Effects and Defects in Solids, 173 (11-12). pp. 1090-1104. ISSN 1042-0150

Z

Za'bah, Nor Farahidah and Md Ralib @ Md Raghib, Aliza 'Aini and Kwa, Kelvin S. K. and O'Neill, Anthony (2018) Material characterization of a doped triangular silicon nanowire using raman spectroscopy. Advanced Science Letters, 24 (11). pp. 8962-8965. ISSN 1936-6612 E-ISSN 1936-7317

Zabri, Siti Normi and Mohd Salleh, Nurhashikin and Abu, Maisarah and Mohamad, Sarah Yasmin (2018) Study of a flexible antenna for intelligent transport system application. In: 2017 IEEE Asia Pacific Microwave Conference, APMC 2017, 13 - 16 November 2017, Renaissance Kuala Lumpur Hotel, Kuala Lumpur.

Zaharudin, Zarimin and Adam, Ismail and Abdul Kadir, Kushsairy and Khan, Sheroz and Nordin, Anis Nurashikin and Ahmed Shaikh, Faraz and Hassan Abdalla Hashim, Aisha and Abdul Malik, Noreha and Wan Morshidi, Wan Hafiy (2018) Optimized RC timing technique for accurate measurement of minute capacitance changes. In: 3rd IEEE International Conference on Engineering Technologies and Social Sciences, ICETSS 2017, 7th-8th August 2017, Bangkok, Thailand.

Zainan Nazri, Nurul Jannah and Gasmelsid, Saadeldin Mansour and Samsudin, Sofiah and Azman, Amelia Wong and Mohammed Yaqub, Mohammed Abullais Shamsuddin (2018) RIGS16-150-0314/ A pilot study on cyclic process approach for disposing Islamic literature material. Project Report. RMC, Kuala Lumpur. (Unpublished)

Zainuddin, Ahmad Anwar and Nordin, Anis Nurashikin and Ab Rahim, Rosminazuin (2018) Recent trends in dengue detection methods using biosensors. IIUM Engineering Journal, 19 (2). pp. 134-153. ISSN 1511-788X E-ISSN 2289-7860

Zainuddin, Ahmad Anwar and Nordin, Anis Nurashikin and Ab Rahim, Rosminazuin and Md Ralib @ Md Raghib, Aliza 'Aini and Khan, Sheroz and Guines, Cyril and Chatras, Matthieu and Pothier, Arnaud (2018) Verification of quartz crystal microbalance array using vector network analyzer and openQCM. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 84-93. ISSN 2502-4752 E-ISSN 2502-4760

Zainuddin, Ahmad Anwar and Nordin, Anis Nurashikin and Md Ralib, Aliza Aini and Ab Rahim, Rosminazuin and Khan, Sheroz and Guines, Cyril and Chatras, Matthieu and Pothier, Arnaud (2018) Design and optimization of a MEMS quartz mass sensor array for biosensing. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, 28 - 30 November 2017, Putrajaya.

Zainurin, Nur Aimi Aliah and Hashim, Yumi Zuhanis Has-Yun and Mohamed Azmin, Nor Fadhillah and Abbas, Phirdaous (2018) Agarwood leaf essential oil characterization and effects on MCF-7 breast cancer cells. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1604-1609. E-ISSN 2088-5334

Zakaria, Faiz and Hrairi, Meftah and Daoud, Jamal Ibrahim (2018) Multi-objective optimization of incremental sheet metal forming. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Zakaria, Mohd Hafizu and Aminanda, Yulfian and Ahmad Rashidi, Syazwan and Mohamed Shah @ Mat Sah, Mohamed Sallauddin (2018) Spring-back of thick uni-directional carbon fibre reinforced composite laminate for aircraft structure application. In: 5th International Seminar on Aerospace Science and Technology (ISAST 2017), 27th-29th Sept. 2017, Medan, North Sumatra; Indonesia.

Zamzuri, Ahmad Syahmi and Ayob, Nur Idayu and Abdullah, Yusof and Hasbullah, Nurul Fadzlin (2018) Effect of irradiation upon single layer graphene on SiO 2 /Si substrate using Electron Beam Irradiation (EBI). In: 4th Advanced Materials Conference (AMC) 2018, 27th-28th Nov. 2018, Hilton Kuching, Sarawak. (Unpublished)

Zeeshan, Sumayya and Shahid, Zeeshan and Khan, Sheroz and Shaikh, Faraz Ahmed (2018) Solid waste management in Korangi District of Karachi using GPS and GIS: a case study. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Kuala Lumpur, Malaysia.

Zik, Nor Azyan Farrah Adila and Sulaiman, Sarina and Jamal, Parveen (2018) Nanocatalyst from waste for biodiesel production. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Zik, Nor Azyan Farrah Adila and Sulaiman, Sarina and Jamal, Parveen (2018) Thermally produced nano catalyst for biodiesel production: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (2). pp. 139-147. ISSN 2289-7879

Zubairi, Hidayah and Alam, Md. Zahangir and Salleh, Md. Noor and Salleh, Hamzah Mohd. (2018) Media optimization for the production of thermostable and organic solvent tolerant lipase by solid state fermentation from palm kernel cake. In: 5th International Conference on Biotechnology Engineering 2018, 19th-20th September 2018, Kuala Lumpur.

Zubir, Nazira and Awang, Zolkofli and Mohd. Dani, Siti Mardziah and Hassan, Nur Jannah and Sabri, Sabrina and Mohd. Yusof, Mohd Isa and Husin, Abu Hassan and Hassan, Mohd Kamal (2018) Natural science from the worldview of the Qur'an: an introduction - volume 3. Institut Terjemahan & Buku Malaysia (ITBM), Kuala Lumpur. ISBN 978-967-430-461-4

Zubir, Nazira and Hassan, Nur Jannah and Mohd. Yusof, Mohd Isa and Husin, Abu Hasan and Hassan, Mohd Kamal (2018) Natural science from the worldview of the Qur'an: an introduction - volume 2. Institut Terjemahan & Buku Malaysia (ITBM), Kuala Lumpur. ISBN 978-967-430-460-7

Zuheir, Mohammad and El-Faitouri, Abdulhafed S. and Rajab, Zakariya and Khalil, Ashraf F. and Alfergani, Asma and Khan, Sheroz and Ahmed, Syed Faiz and Ali, Athar (2018) A comparison between solar thermal and photovoltaic/thermal (PV/T) systems for typical household in Libya. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Zulkurnain, Nurul Fariza and Rebitanim, Azli Fitri and Abdul Malik, Noreha (2018) Analysis of THUG: a low-interaction client honeypot to identify malicious websites and malwares. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 19th-20th September 2018, Kuala Lumpur.

Zulkurnain, Nurul Fariza and Shah, Ahmad (2018) HYBRID: an efficient unifying process to mine frequent itemsets. In: 2017 IEEE 3rd International Conference on Engineering Technologies and Social Sciences (ICETSS), 7th-8th August 2017, Bangkok, Thailand.

This list was generated on Thu Mar 28 19:28:59 2024 +08.