Items where Division is "Kulliyyah of Engineering" and Year is 2011

Jameel, Ahmed Tariq and Asrar, Waqar, eds. (2011) Advanced numerical techniques in engineering and science. IIUM Press, Kuala Lumpur. ISBN 978-967-418-020-1

Mohamed Ali, Jaafar Syed and Sulaeman, Erwin, eds. (2011) Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, 0-1. ISBN 978-967-418-148-2

Halim, Zahurin and Yaacob, Iskandar Idris and Maleque, Md. Abdul, eds. (2011) Advances in materials engineering Vol. 1. IIUM Press, Kuala Lumpur. ISBN 9789674181673

Maleque, Md. Abdul and Yaacob, Iskandar Idris and Halim, Zahurin, eds. (2011) Advances in materials engineering Vol. 2. IIUM Press, Kuala Lumpur. ISBN 9789674181680

Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Hameed, Shihab A., eds. (2011) Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 1-0. ISBN 9789674181406

Al-Khatib, Ma'an Fahmi Rashid and Anuar, Hazleen and Samat, Noorasikin and Al-Mamun, Abdullah, eds. (2011) Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur. ISBN 9789670225876

Mohiuddin, A. K. M. and Hoda, Asif , eds. (2011) Alternative energy. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, 0-1. ISBN 9789674181581

Islam, Md. Rafiqul and Chebil, Jalel, eds. (2011) Antennas and propagation: modeling, simulation and measurements. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181383

Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Jamal, Parveen and Mohd. Nasir, Nur Aimi and Seeni Mohamed, Nurhafizah, eds. (2011) Bioprocessing of lactic acid by fermentation technique. IIUM Press, Kuala Lumpur. ISBN 9789674180935

Mel, Maizirwan and Mohd. Salleh, Hamzah and Ariffin, Mohd Azmir, eds. (2011) Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674180102

Chowdhury, Md. Sazzad Hossien, ed. (2011) Calculus with single variable. IIUM Press, Kuala Lumpur. ISBN 9789674181956

Akmeliawati, Rini, ed. (2011) Computational intelligence in robust control: theory and applications. IIUM Press, Kuala Lumpur. ISBN 9789674181963

Shuriye, Abdi Omar and Othman, Raihan, eds. (2011) Contributions of Muslim scientists to medicine and related sciences. IIUM Press, Kuala Lumpur, 0-1. ISBN 978-967-418-155-0

Shuriye, Abdi Omar and Faris, Waleed Fekry, eds. (2011) Contributions of early muslim scientists to engineering sciences and related studies. IIUM Press, Kuala Lumpur. ISBN 978-967-418-157-4

Muyibi, Suleyman Aremu and Jami, Mohammed Saedi and Zainudin, Zaki, eds. (2011) Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur. ISBN 978-967-418-150-5

Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul, eds. (2011) Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181598

Mohiuddin, A. K. M., ed. (2011) Engine and auxiliary systems. IIUM Press, International Islamic University Malaysia, Kuala Lumpur. ISBN 978-967-418-216-8

Noorbatcha, Ibrahim Ali and Abdul Karim, Mohamed Ismail and Mohd. Salleh, Hamzah, eds. (2011) Experimental methods in modern biotechnology. IIUM Press, Kuala Lumpur. ISBN 978-967-0225-86-9

Adesta, Erry Yulian Triblas and Shafie, Amir Akramin and Wan Yusoff, Wan Ahmad Yusmawiza, eds. (2011) High speed cutting: an approach towards improved machining performance. IIUM Press, Kuala Lumpur. ISBN 978-967-418-023-2

Khan, Sheroz and Alam, A. H. M. Zahirul and Nordin, Anis Nurashikin, eds. (2011) Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181710

Mel, Maizirwan and Arifin, Mohd Azmir, eds. (2011) Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur. ISBN 9789674180713

Muyibi, Suleyman Aremu and Faris, Waleed Fekry and Daoud, Jamal Ibrahim and Mirghani, Mohamed Elwathig Saeed and Shuriye, Abdi Omar and Al-Khatib, Ma'an Fahmi Rashid and Chebil, Jalel, eds. (2011) Islamization, ethics and values in science and technology. IIUM Press, International Islamic University Malaysia. ISBN 978-967-022-582-1

Anuar, Hazleen and Samat, Noorasikin, eds. (2011) Malaysia natural fibres for diversed bio-based application. IIUM Press, Kuala Lumpur. ISBN 9789674180218

Khan, Md. Raisuddin and Rahman , Md Mozasser and Muhammad , Mahbubur Rashid and Sidek, Shahrul Na'im, eds. (2011) Mechatronics book series: System design and signal processing (volume 2). IIUM Press, Kuala Lumpur. ISBN 9789674181321

Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa and Mohd. Mustafah, Yasir, eds. (2011) Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181765

Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Gunawan, Teddy Surya, eds. (2011) Multimedia encryption, transmission and authentication. IIUM Press, Kuala Lumpur. ISBN 978-967-418-160-4

Mel, Maizirwan and Ahmad Nor, Yusilawati and Sopyan, Iis and Fadli, Ahmad, eds. (2011) Recent development of microcarrier for cell culture engineering. IIUM Press, International Islamic University Malaysia, Kuala Lumpur. ISBN 9789674180096

Ahmad, Zuraida, ed. (2011) SAGO (metroxylon rottb) and its applications. IIUM Press, Kuala Lumpur. ISBN 9789674181635

Kartiwi, Mira and Gunawan, Teddy Surya and Hassan Abdalla Hashim, Aisha, eds. (2011) Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, 00-00. ISBN 9789670225814

Al-Khateeb, Khalid A. Saeed, ed. (2011) Selected topics in advanced electronics. IIUM Press, Kuala Lumpur. ISBN 9789674181536

Sulaeman, Erwin, ed. (2011) Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181451

Mel, Maizirwan and Nadir, Najiah, eds. (2011) Taguchi method in bioprocess engineering: case studies. IIUM Press, Kuala Lumpur. ISBN 9789674180766

Siddiqi, Mohammad Umar and Jarot, Sigit Puspito Wigati and Khalifa, Othman Omran, eds. (2011) Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181697

Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Gunawan, Teddy Surya, eds. (2011) An evaluation of transform domain watermaking and its application to intellectual properties of image. IIUM Press, Kuala Lumpur, 0-1.

Ahmad , Zuraida and Abdul Rahman, Fariza (2011) Foam impregnation method for artificial bone graft application : study on the effect of drying time. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 78-83. ISBN 9789674181680

Mokhtar, Hanan and Sicot, Olivier and Rousseau, Jérôme and Aminanda, Yulfian and Aivazzadeh, Shahram (2011) The influence of ageing on the impact damage of carbon epoxy composites. Procedia Engineering, 10. pp. 2615-2620. ISSN 1877-7058

-, Abdus Sabur and Mohammad , Yeakub Ali (2011) Fabrication of micro filter by electro discharge machining. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 159-164. ISBN 9789674181628

-, M.Tahir and Jarot, Sigit Puspito Wigati and Siddiqi, Muhammad Umar (2011) Recent approaches to wireless physical layer security. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 161-168. ISBN 9789674181697

-, Nashrul Hakiem and Siddiqi, Mohammad Umar and Jarot, Sigit Puspito Wigati (2011) Secure IPv6 address generation. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 183-189. ISBN 9789674181697

-, Pramusanto and Purwanto, Hadi and Saleh, Nuryadi and Suprianto, Sony (2011) Kinetic study of reduction roasting of mixed laterite ore and coal. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 70-74. ISBN 9789674181642

-, Suryanto (2011) Aluminum spray coating for corrosion resistance of steel. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 192-197. ISBN 9789674181642

-, Suryanto (2011) Amorphous coating of iron nickel alloy. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674181680

-, Suryanto (2011) Cathodic protection of underground pipes. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 210-215. ISBN 9789674181642

-, Suryanto (2011) Characterization and utilization of fly ash. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 189-194. ISBN 9789674181673

-, Suryanto (2011) Coating for high speed cutting tools. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 103-124. ISBN 9789674180232

-, Suryanto (2011) Corrosion behavior of duplex stainless steel in sea water. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 204-209. ISBN 9789674181642

-, Suryanto (2011) Corrosion behavior of zinc in potassium hydroxide aqueous solution. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 13-18. ISBN 9789674181680

-, Suryanto (2011) Electrodeposition of alloys. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 198-203. ISBN 9789674181642

-, Suryanto (2011) Electroless nickel based coatings from solution containing sodium hypophosphite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 184-188. ISBN 9789674181673

-, Suryanto (2011) Electroless nickel based coatings from solution containing sodium hypophosphite. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 186-191. ISBN 9789674181642

-, Suryanto (2011) Normal deposition to anomalous deposition. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 109-114. ISBN 9789674181680

-, Suryanto (2011) Pulsed electrodeposition. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 178-182. ISBN 9789674181673

-, Suryanto and Yunus, Nurul Azhani (2011) Powder coating has potential in developing several industries. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 230-236. ISBN 9789674181659

., Ahmad Fadli and Sopyan, Iis and ., Nur Syahidah and ., Nur Nadia (2011) Investigation of the effect of starch addition on protein foaming-consolidation porous alumina containing hydroxyapatite nanopowder. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 115-119. ISBN 9789674181673

., Arifutzzaman and Maleque, Md. Abdul (2011) The tribological behaviour of Al-Si automotive piston material. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 75-80. ISBN 9789674181642

., Md. Akhtaruzzaman and Shafie, Amir Akramin (2011) Joint demeanors of an anthropomorphic robot in designing the novel walking gait. In: URAI 2011 - 2011 8th International Conference on Ubiquitous Robots and Ambient Intelligence, 23-26 Nov. 2011, Incheon.

., Md. Akhtaruzzaman and Shafie, Amir Akramin and Muhammad , Mahbubur Rashid (2011) Component selection strategy for an anthropomorphic robot. In: 2011 National Postgraduate Conference (NPC), 19-20 Sept. 2011, Kuala Lumpur.

., Muta'alim and Purwanto, Hadi and Saleh, Nuryadi and ., Pramusanto (2011) Upgrading of iron sand by magnetic concentration and reduction. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 7-15. ISBN 9789674181642

A Hamzah, Nur Hanisah and Azmi, Nurhafizah and Adesta, Erry Yulian Triblas (2011) The development of cost estimation for quality assurance system in die-casting processes. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 72-83. ISBN 9789674181598

A. Haji, Ibrahim and Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and Khalifa, Othman Omran and Abdullah, Khaizuran (2011) Analysis of beamforming algorithms. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 108-120. ISBN 9789674181383

A. Haji, Ibrahim and Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and Khalifa, Othman Omran and Abdullah, Khaizuran (2011) Direction of arrival algorithms for array antenna design. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 97-107. ISBN 9789674181383

A. Haji, Ibrahim and Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and Khalifa, Othman Omran and Abdullah, Khaizuran (2011) Overview of smart antenna systems. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 89-96. ISBN 9789674181383

A. R. , Fatimah Azreen and Sutjipto, Agus Geter Edy and Adesta, Erry Yulian Triblas (2011) Fabrication of CuSiC composite by powder metallurgy route. Advanced Materials Research, 264/65. pp. 748-753. ISSN 1662-8985

A. W. , Fatimatuzahraa and Baharuddin, Farahaina and Wan Yusoff, Wan Ahmad Yusmawiza (2011) The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), 25-28 September 2011, Langkawi, Malaysia. (Unpublished)

A.K.M., Parves Iqbal and Aris, Ishak and Misron, Norhisam and M., Mamiruce Marhaban and Asrar, Waqar (2011) Design process involved in developing mechanism of linear motor operated multiple spray operations spray gun. Australian Journal of Basic and Applied Sciences, 5 (7). pp. 843-850. ISSN 1991-8178

Abakrb, Yousif A. and Ismail, Ahmad Faris and Ahmed, Mirghani Ishak (2011) Experimental investigation of a multistage evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 197-202. ISBN 9789674181581

Abbas, Phirdaous and Daoud, Jamal Ibrahim (2011) Ibn al Shatir's influence on modern astronomy. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 12-18. ISBN 978-967-418-157-4

Abd Ghadas, Zuhairah Ariff and Wan Husin, Wan Rumaizi (2011) Contractual agency: an appraisal of section 175-191 of the contracts act 1950 (the civil and Shari'ah perspectives). In: Harmonisation of the Shari'ah and civil laws (perspective and practice). IIUM Press, Kuala Lumpur, pp. 411-449. ISBN 9789670225890

Abd Halim, Nor Farah Huda and -, Afzeri and Aminanda, Yulfian (2011) Experimental study of cutting parameter for drilling on fabric carbon/epoxy composite laminates. In: 2011 International Conference on Advanced Design and Manufacturing Engineering, (ADME 2011), 16th-18th Sept. 2011, Guangzhou, China.

Abd Rahman, Akmal Nurhananie and Shuriye, Abdi Omar (2011) Al-Razi on gout. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 19-29. ISBN 978-967-418-155-0

Abd rahman, Nur Rahilah and Shuriye, Abdi Omar (2011) Al-Razi works and contributions in neurological sciences. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 12-18. ISBN 978-967-418-155-0

Abd. Aziz, Hassanuddeen (2011) Can Islamic banking industry ethical frame work save the world financial system: the response of islamic banks in 2008 financial crisis. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 166-176. ISBN 9789670225821

Abd. Rahman, Mohamed and M. Nawawi, M. Kamarul Helmi (2011) Pultrusion of Pineapple Leaf Fibre (PALF)-reinforced vinyl ester composites: water absorption property. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 162-168. ISBN 9789674181598

Abdul Karim, Mohamed Ismail and Mel, Maizirwan and Jamal, Parveen and Mohd Salleh, Mohammad Ramlan and Alamin , Noraini (2011) Media screening of Lactobacillus rhamnosus fermentation for lactic acid production. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, Kuala Lumpur, pp. 17-24. ISBN 9789674180935

Abdul Karim, Mohd Ismail and Mohd. Salleh, Hamzah and Mel, Maizirwan (2011) Batch fermentation of recombinant Escherichia coli producing β-glucuronidase using different control conditions. In: Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 37-48. ISBN 9789674180102

Abdul Malek, Norun and Seager, Rob and Flint, James (2011) Pattern synthesis using combination of the induced EMF method and a genetic algorithm. In: 2011 Loughborough Antennas & Propagation Conference, 14th-15th November 2011, Loughborough, UK.

Abdul Malik, Noreha (2011) Functional electrical stimulation system and profile for walking. In: Principle of Transducer Devices and Components. IIUM Press, Kuala Lumpur, pp. 303-309. ISBN 978-967-418-172-7

Abdul Rahim, Toibah and Sopyan, Iis and Mel, Maizirwan and Fadli, Ahmad (2011) Evaluation on biological performance of porous pure and magnesium-doped biphasic calcium phosphate ceramics using vero cell culture. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 51-59. ISBN 9789674180096

Abdul Rahman, Fariza and Ahmad, Zuraida and Iis, Sopyan (2011) Egg Yolk as pore creating agent to produce porous tri-calcium phosphate for bone implant application. Advanced Materials Research, 265. pp. 760-764. ISSN 1662-8985

Abdul Razak, Fadhilah and Ismail, Ahmad Faris (2011) Ibn al-Jazzar on fever. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 59-63. ISBN 978-967-418-155-0

Abdul Razak, Nur Humairah and Ahmad, Zuraida (2011) Workability of coir fibre-reinforced cement-albumen composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 195-200. ISBN 9789674181673

Abdulazeez, Murtala and Salami, Momoh Jimoh Eyiomika and Khan, Md. Raisuddin (2011) Natural ventilation of yam storage system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 199-207. ISBN 9789674181734

Abdulazeez, Murtala and Salami, Momoh Jimoh Eyiomika and Khan, Md. Raisuddin and Adeyemi, Nabeel A. (2011) Simulation of airflow and temperature distribution in yam storage system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 213-218. ISBN 9789674181734

Abdullah, Kassim Abdulrahman and Mohamed Ali, Jaafar Syed and Habeeb Rahmathullah, Mohd Azlan and Kaharuddin, Ruzael Amir Afendi (2011) Design and development of driving system for disabled driver. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 208-213. ISBN 9789674181741

Abdullatif, Mohammad Salah Aldin and Daoud, Jamal Ibrahim (2011) Al-Battani contributions in astronomy and mathematics. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 45-48. ISBN 978-967-418-157-4

Abdulwaheed, Musa and Ismail, Ahmad Faris (2011) Al-Razi's contribution to the study of nexus between human mind and body. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 39-44. ISBN 978-967-418-155-0

Abdulwaheed, Musa and Ismail, Ahmad Faris (2011) Energy particle-physics : the efforts of Abdel Nasser Tawfic. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 80-85.

Aboaba, Abdulfattah A. and Hameed, Shihab A. and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2011) Current trend in Image Guided Surgery(IGS). In: Human Behaviour Recognition, Identification and Computer Interaction. IIUM Press, Kuala Lumpur, pp. 344-360. ISBN 978-967-418-156-7

Aboaba, Abdulfattah A. and Hameed, Shihab Ahmed and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Harun, Rahmat H. and Mohd Zain, Nurzaini Rose (2011) Iterative spatial sectoring algorithm: a computer based approach to determining area of irregular closed space and tumor volume. In: 2011 National Postgraduate Conference - Energy and Sustainability: Exploring the Innovative Minds, NPC 2011, 19th-20th Sept. 2011, Kuala Lumpur.

Abu Bakar, Muslim A. and Kassim, Liban A. and Khalifa, Othman Omran (2011) An overview of pulse Oximetry system for noninvasive monitoring. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 528-534. ISBN 9789670225685

Abu Kasim, Norul Ashikin and Gunawan, Teddy Surya (2011) Virtual-learning content management system using Problem-Based Learning (PBL). In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 63-70. ISBN 9789674181611

Abumuala, Mohammed and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2011) An overview of scalable video streaming. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 88-99. ISBN 978-967-418-160-4

Abumuala, Muhammad and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2011) Video streaming and encrypting algorithms. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 190-216. ISBN 9789674181697

Adesta, Erry Yulian Triblas and -, Sharmila Fathima (2011) Quality management system: in light of project management. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 251-258. ISBN 9789674181659

Adesta, Erry Yulian Triblas and Ahmed Ghazal, Belal (2011) The effect of deep cryogenic treatment on the properties of AISI D2 tool steel. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 32-39. ISBN 9789674181659

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) New tool life models in turning hardened steel AISI 4340 under high cutting speed. In: High Speed Cutting - An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 3-16. ISBN 978-967-418-023-2

Adesta, Erry Yulian Triblas and Mohamad Ashraf, Asfana Banu and Abdul Rahman Azmil, Nur Atiqah (2011) Critical chain in project management. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 239-245. ISBN 9789674181598

Adewale, Ahmed Idris and Mirghani, Mohamed Elwathig Saeed and Muyibi, Suleyman Aremu and Daoud, Jamal Ibrahim and Mikail, Maryam Abimbola (2011) Disinfection kinetics of nahar ( Musua Ferrea) seed kernel"s oil using pour plate method and heterographic plate count. African Journal of Biotechnology, 10 (81). pp. 18749-18754. E-ISSN 1684-5315

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2011) Waste cooking oil transesterification: influence of impeller type, speed and bottom clearance on fame yield. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Afdzaluddin, Atiqah and Maleque, Md. Abdul (2011) High Density Polyethylene (HDPE) as an alternative material in fuel tank production. In: Advances in materials engineering (vol. 1). IIUM Press, Kuala Lumpur, pp. 126-131. ISBN 9789674181673

Afdzaluddin, Atiqah and Maleque, Md. Abdul (2011) High Density Polyethylene (HDPE) as an alternative material in fuel tank production. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 164-171. ISBN 9789674181659

Afdzaluddin, Atiqah and Shafie, Amir Akramin (2011) A success journey of Mehmet Oz in cardiothoracic surgery. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 109-114. ISBN 978-967-418-155-0

Afzeri, Afzeri and Sutjipto, Agus Geter Edy and Nurul Amin, A.K.M (2011) Pin type reconfigurable clamping ability evaluation for setup-free technology. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 569-575. ISBN 9789670225685

Ahmad, Kartini and Nazar, Roslinda and Pop, Loan (2011) Boundary layer flow and heat transfer of a micropolar fluid near the stagnation point on a stretching vertical surface with prescribed skin friction. International Journal of Mineral Metallurgy and Minerals, 18 (4). pp. 502-507. ISSN 1674-4799

Ahmad, Salmiah and Tokhi, M. Osman (2011) Linear quadratic regulator (LQR) approach for lifting and stabilizing of two wheeled wheelchair. In: 4th International Conference on Mechatronics (ICOM), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Ahmad, Zuraida and Abdul Rahman, Fariza (2011) Foam impregnation method for artificial bone graft application: study on the effect of sintering temperature. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 84-88. ISBN 9789674181680

Ahmad, Zuraida and Abdul Razak, Nur Humairah and Omar, Nurihan and Yusoff, Farrah (2011) Overview on Malaysia natural fibres and its applications. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 1-19. ISBN 9789674180218

Ahmad, Zuraida and Halim, Zahurin and Md Yusof, Fauziah (2011) Investigation on the effect of ultra violet on cotton albumen composite. In: Advances in materials engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 96-99. ISBN 9789674181680

Ahmad, Zuraida and Omar, Nurizan (2011) The effects of chemical and mechanical treatments on coir fiber to mechanical properties of coir-albumen-concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 108-113. ISBN 9789674182311

Ahmad, Zuraida and Purwanto, Hadi and Yusoff, Farrah (2011) Malaysian coir fibre for acoustical absorption cement composite panel. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 39-48. ISBN 9789674180218

Ahmad, Zuraida and Sarifuddin, Nurshahida and Iis, Sopyan and Halim, Zahurin (2011) Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal, 12 (1). pp. 63-75. ISSN 1511-788X

Ahmad, Zuraida and Teoh, Swin Le and Samannamunthaliar, Kumaran (2011) Thermal and morphological study of Biopolymer Cotton-Albumen Clay (BCAC) composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 62-67. ISBN 9789674182311

Ahmad, Zuraida and Yusof, Yusliza and Halim, Zahurin and Md. Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of curing and aging conditions on its mechanical properties. Key Engineering Materials, 471-72. pp. 403-408. ISSN 1013-9826

Ahmad Kamal, Syafawati and Mansor, Mariatul Fadzillah and Md. Jahim, Jamaliah and Anuar, Nurina (2011) Effect of pre-treatment palm oil mill effluent POME on biohydrogen production by local isolate clostridium butyricum. In: 2011 International Conference on Chemical Engineering and Advanced Materials (CEAM 2011), 28th-30th May 2011, Changsha, China.

Ahmad Nor, Yusilawati and Mel, Maizirwan and Mohd. Salleh, Hamzah and Hooi, Ng Kim and C.S, Wong (2011) Ultraviolet/ozone treatment for polystyrene beads modification and its effect on gelatin coating. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, International Islamic University Malaysia, pp. 11-22. ISBN 9789674180096

Ahmad Nor, Yusilawati and Mel, Maizirwan and Mohd. Salleh, Hamzah and Hooi, Ng Kim and C.S, Wong (2011) The study of immobilized bovine and fish gelatin on carboxyl containing polystyrene beads for vero cell culture. In: Recent development of microcarrier for cell culture engineering. IIUM Press, Kuala Lumpur, pp. 23-31. ISBN 9789674180096

Ahmad Nor, Yusilawati and Mel, Maizirwan and Sopyan, Iis and Hamzah, Mohd. Salleh and Ng, K.H. and Wong, Chiow San (2011) Surface modification of polystyrene beads by UV/Ozone treatment. Advanced Materials Research, 264. pp. 1532-1537. ISSN 1662-8985

Ahmad Nor, Yusilawati and Sulong, Nurul Hafizah and Mel, Maizirwan and Mohd. Salleh, Hamzah and Sopyan, Iis (2011) The vero cells growth in different type of microcarriers. In: Recent Development of microcarrier for Cell Culture Engineering. IIUM Press, Kaula Lumpur, pp. 85-95. ISBN 9789674180096

Ahmad Nor, Yusilawati and Jaafar, Nuhu Jaafar and Mel, Maizirwan (2011) Locally processed serum performance in vero cell culture: Part I. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 61-72. ISBN 9789674180096

Ahmad Nor, Yusilawati and Jaafar, Nuhu Jaafar and Mel, Maizirwan (2011) Locally processed serum performance in vero cell culture: Part II. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 73-84. ISBN 9789674180096

Ahmad Nor, Yusilawati and Mel, Maizirwan and Sopyan, Iis and Mohd. Salleh , Hamzah and Hooi, Ng Kim and C.S., Wong (2011) UV/ozone treatment system for polystyrene beads modification. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, International Islamic University Malaysia, pp. 1-10. ISBN 9789674180096

Ahmad Raus, Raha and Abdullah, Erlina and Jamal, Parveen (2011) Extraction and evaluation of antibacterial activity from selected flowering plants. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 43-49. ISBN 9789674181512

Ahmad Raus, Raha and Mohd Puzi, Nur Shazwana and Jamal, Parveen (2011) Extraction of antibacterial compounds from plants using sonicator. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 50-56. ISBN 9789674181512

Ahmad Raus, Raha and Nor Muhammad, Nor Azlin Alia and Santhanam, Jacinta (2011) Extraction and evaluation of anticandidal activity from selected Malaysian plants. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 57-61. ISBN 9789674181512

Ahmad Raus, Raha and Samsuddin, Hayatunnisa and Addnan, Nor Hafizah and Santhanam, Jacinta (2011) Extraction and evaluation of antifungal activity from selected Malaysian plants. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 62-67. ISBN 9789674181512

Ahmad Zabidi, Suriza and Islam, Md. Rafiqul and Wajdi, Al Khateeb and Ahmed Wathik, Naji (2011) Analysis of the Rain Effects on Terrestrial Free Space Optics Based on Data Measured in Tropical Climate. IIUM Engineering Journal, 12 (5). pp. 45-51. ISSN 1511-788X

Ahmed, Mirghani Ishak and Abakrb, Yousif A. and Ismail, Ahmad Faris (2011) Developments on solar operated water desalination. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 163-168. ISBN 9789674181582

Ahmed, Mirghani Ishak and Hrairi, Meftah (2011) Thermal analysis of a micro device used for detection of colorectal cancer. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 220-228. ISBN 9789674181581

Ahmed, Mirghani Ishak and Ismail, Ahmad Faris and Abakrb, Yousif A. (2011) Modelling of electronics heat sink – influence of the wake function generation on the accuracy of CFD analysis. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 203-212. ISBN 9789674181581

Ahmed, Mirghani Ishak and Sadiq, M.J (2011) An autonomous integrated architecture for the next generation air traffic management and Avionics systems. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 444-449. ISBN 9789670225685

Ahmed, Musse Mohamud and Massere, Siti Nor Amiza (2011) Development of energy assessment tools for single phase appliances. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 50-63. ISBN 9789670225814

Ahmed, Musse Mohamud and Muhammad Hanapi, Noor Zatil Amali and Fathil, Che Fazilah (2011) Losses of electric motors. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 180-184. ISBN 9789674181703

Ahmed, Musse Mohamud and Soo, Wai Lian (2011) Protection system for electrical distribution. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 37-42. ISBN 9789674181703

Ahmed, Musse Mohamud and rahmatullah, Rafizah and Abdul Rashid, Syarifah Nur Zati (2011) Air blowing equipment. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 210-213. ISBN 9789674181703

Ahmed, Musse Mohamud and rahmatullah, Rafizah and Abdul Rashid, Syarifah Nur Zati (2011) Fan motor efficiency requirement. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 217-219. ISBN 9789674181703

Ahmed Ali Baig, Maughal and Al-Mufadi, Farhad and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2011) Control of base flows with micro jets. International Journal of Turbo & Jet-Engines, 28 (1). pp. 59-69. ISSN 0334-0082 E-ISSN 2191-0332

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) Effects of austempering treatment on mechanical properties of ductile iron. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 170-178. ISBN 9789674181598

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) In-Situ syntheses of high wear resistant coating reinforced Ti-6al-4v Matrix. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 173-179. ISBN 9789674181659

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) The effect of deep cryogenic treatment on the properties of AISI D2 tool steel. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 286-293. ISBN 9789674181598

Ahmed Ghazal, Belal and Ismail, Ahmad Faris (2011) The contribution of Hassan al-Rammah to gunpowder and rocket technology. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 36-40. ISBN 978-967-418-157-4

Aibinu, Abiodun Musa and Ahmad Quadri, Haaris and -, Mu Ham Mach A Mine and Saeed S, Almehmadi Tarig and Hamide, Rohimah (2011) Fault tree analysis, a case study of a simple line following robot. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 344-350. ISBN 9789674181765

Aibinu, Abiodun Musa and Mohd Yusoff, Rusnajaa and Sani, Liyana (2011) Design of ink refilling machine for marker pen. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 278-282. ISBN 9789674181765

Aibinu, Abiodun Musa and Salami, Momoh Jimoh Emiyoka and Shafie, Amir Akramin (2011) A novel signal diagnosis technique using pseudo complex-valued autoregressive technique. Expert Systems with Application, 38 (8). pp. 9063-9069. ISSN 0957-4174

Aibinu, Abiodun Musa and Syed Mohammad, Sharifah Nadiah and Wan Azmi, Wan Nur Faezah (2011) Review of Malaysian traffic summon and payment system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 351-359. ISBN 9789674181765

Ainibu, Abiodun Musa and Shafie, Amir Akramin and Salami, Momoh Jimoh Emiyoka and Salami, A. F. and Bamgbopa, Ibrahim A. and Lawal, Wahab Adetunji (2011) Development of a new method of crack modelling and prediction algorithm. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 520-527. ISBN 9789670225685

Aizat Jamaluddin, Mohd Jamil and Salleh, Hamzah Mohd. (2011) On-column refolding of recombinant fungal endoglucanase. In: Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 101-114. ISBN 9789674180102

Akmeliawati, Rini and Raafat, Safanah M. (2011) Computational intelligence in robust control: a review. In: Computational intelligence in robust control: theory and applications. IIUM Press, Kuala Lumpur, pp. 1-27. ISBN 9789674181963

Akmeliawati, Rini and Sediono, Wahju and Alang Md Rashid, Nahrul Khair (2011) Mechatronics book series: robotics and automation. IIUM Press, Kuala Lumpur. ISBN 9789674181529

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of empirical models for surface roughness during high speed turning for hard materials using Box-Behnken design. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 31-38. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of new model for cutting force in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 145-152. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of tooling cost model in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 125-144. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, International Islamic University Malaysia, pp. 93-100. ISBN 9789674180232

Al Mamun, Abdullah and Alam, Md Zahangir and Abdul Hadi, Muhammad Akram (2011) Performance of CNTs column in removing lead from water. In: Current Research and Development in Biotechnology Engineering at IIUM. IIUM Press, Gombak, Kuala Lumpur, pp. 63-67. ISBN 978-967-418-136-9

Al- Bakri, S.H. and Mat Kiah, M.L. and Zaidan , A. A. and Zaidan, B.B. and Alam, Gazi Mahabubul (2011) Securing peer-to-peer mobile communications using public key cryptography: new security strategy. International Journal of the Physical Sciences, 6 (4). pp. 930-938. ISSN 1992-1950

Al-Khatib, Ma'an Fahmi Rashid and Ahmad, Nur Amalina and Olanrewaju, Alade A (2011) Isolation of bacteria from soil for plastics degradation. In: Current research and developments in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 183-189. ISBN 9789674181369

Al-Khatib, Ma'an Fahmi Rashid and Al-Mamun, Abdullah and Akbar, Iqrah (2011) Removal of colour from palm oil mill effluent using Granular Activated Carbon (GAC). In: Current research and developments in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 224-231. ISBN 9789674181369

Al-Khatib, Ma'an Fahmi Rashid and Al-Mamun, Abdullah and Muhamad Nor, Nurhazwani (2011) Application of carbon nanotubes impregnated on activated carbon for cadmium removal from aqueous solution. In: Current research and developments in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 109-116. ISBN 9789674181369

Al-Mamun, Abdullah and Al-Khatib, Ma'an Fahmi Rashid and Danial, Rabiatuladawiyah (2011) Regeneration of Carbon Nano Tubes (CNT) in cadmium sorption from water. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 98-113. ISBN 9789670225876

Al-Obaidi, Ali Hussien and Shafie, Amir Akramin (2011) The contribution of Ibn Sahl in refraction of light. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 95-102. ISBN 978-967-418-157-4

Al-Zuhair, Sulaiman and Abakrb, Yousif A. and Ahmed, Mirghani Ishak (2011) The effect of the operating conditions on the apparent viscosity of crude palm oil during separation. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 213-219. ISBN 9789674181581

AlShaibani, Yania A and Daoud, Jamal Ibrahim (2011) Thinking skills course and student's academic self-efficacy. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 403-415. ISSN 1991-8178

Alad, Abass O. and Jameel, Ahmed Tariq and Muyibi, Suleyman Aremu and Abdul Karim, Mohamed Ismail and Alam, Md. Zahangir (2011) Development of semi-fluidized bed bioreactor as novel bioreactor system for the treatment of palm oil mill effluent (POME). In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Alam, A. H. M. Zahirul (2011) Overview of Radio Frequency Microelectromechanical systems reconfigurable antennas. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 450-457. ISBN 9789670225685

Alam, A. H. M. Zahirul and Che Halim, Nur Fadhila (2011) Implementation of capacitance to voltage converter for capacitive transducers. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 255-273. ISBN 9789670225814

Alam, A. H. M. Zahirul and Islam, Md. Rafiqul (2011) Multi-band planar patch antenna. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 69-75. ISBN 9789674181383

Alam, A. H. M. Zahirul and Islam, Md. Rafiqul (2011) Multi-band reconfigurable antenna using RF MEMS switch. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 63-68. ISBN 9789674181383

Alam, A. H. M. Zahirul and Islam, Md. Rafiqul (2011) Tuning fork type planar antenna. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 76-82. ISBN 9789674181383

Alam, A. H. M. Zahirul and Islam, Md. Rafiqul (2011) Ultra wideband antenna with band notch using asymmetrical feedline. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 56-62. ISBN 9789674181383

Alam, Md. Zahangir and Al-Mamun, Abdullah and Mohd Noor, Hikmah (2011) Production of fermentable sugar from lignocellulosic materials using statistical design. In: Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur, pp. 225-230. ISBN 9789674181505

Alam, Md. Zahangir and Mohd. Salleh, Hamzah and Abd Karim, Juwairiyah and Salihu, Aliyu (2011) Selection of potential fungal strains for the production of glucoamylase using non-food cassava. In: Current research and development in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674181505

Alam, Md. Zahangir and Mohd. Salleh, Hamzah and Mohd Yusoff, Noraini (2011) Development of rapid enzymatic process for acid oil production from sludge palm oil. In: Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur, pp. 44-50. ISBN 978-967-418-150-5

Alam, Md. Zahangir and Salleh, Hamzah Mohd. and Ariffin, Radhiah and ., Noor Mohammad (2011) Optimization of process conditions for glucoamylase production using non-food cassava. In: Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur, pp. 38-43. ISBN 9789674181505

Alamgir, Tarik Bin and Alfar, I.J. and Rashid, Muhammad Mahbubur (2011) Mechanical design of a person following robot. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 43-48. ISBN 9789674181529

Alamgir, Tarik Bin and Rashid, Muhammad Mahbubur and Jawad Alfar, Ibrahim (2011) Methods of investigation of a fuzzy based person following robot. In: Mechatronics book series: Robotics and automation. IIUM Press, Kuala Lumpur, pp. 49-55. ISBN 9789674181529

Alang Md Rashid, Nahrul Khair (2011) Loji nuklear jamin bekalan sumber tenaga. Berita Minggu.

Alang Md Rashid, Nahrul Khair and Abang Mohamad Moasili, Dayang Nurulain and Johari, Intan Zaharah and Salleh, Azizullah (2011) Applications of mechatronics engineering in modern agriculture. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 29-33. ISBN 9789674181734

Alang Md Rashid, Nahrul Khair and Ameer Amsa, Mohamad Ghazali (2011) Energy harvesting for wide area sensor networks. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 1-7. ISBN 9789674181734

Alang Md Rashid, Nahrul Khair and Manba Usama, Imama Karim (2011) Auto landmarks generation for SLAM algorithm. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 42-45. ISBN 9789674181734

Alao, Abdur-Rasheed and Konneh, Mohamed (2011) Surface finish prediction models for precision grinding of silicon. International Journal Advances Manufacturing Technology, 58 (9). pp. 949-967. ISSN 0268-3768

Alawi, Mahmoud and Saeed, Rashid Abdelhaleem and Hassan Abdalla Hashim, Aisha (2011) MANET routing protocols. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 85-94. ISBN 9789674181420

Alawi, Mahmoud and Saeed, Rashid Abdelhaleem and Hassan Abdalla Hashim, Aisha (2011) VANET applications. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 95-100. ISBN 9789674181420

Ali, Maisarah and Mohd Noor , Julia (2011) The acceptability of four dimension (4D) virtual construction in Malaysia. In: Intenational Conference on Universal Design in Built Enviroment, 22-23 Nov 2011, Kulliyyah of Architecture and Environmental Design, IIUM. (Unpublished)

Ali, Mohammad Yeakub and -, Wan Emira Azaty and -, Nor Suriza (2011) Micro electro discharge machining of micro pillar array: process development. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, Malaysia, pp. 136-141. ISBN 9789674181628

Ali, Mohammad Yeakub and Lim, B.H. (2011) Trimming of atomic force microscope probe tip by ion milling. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 381-385. ISBN 9789670225685

Ali, Sellami (2011) Applications of definite integrals. In: Calculus with single variable. IIUM Press, Kuala Lumpur, pp. 169-200. ISBN 9789674181956

Ali, Sellami and Al-Khateeb, Khalid A. Saeed and Wahiddin, Mohamed Ridza (2011) The decoy state method in quantum key distribution. In: Selected topics in advanced electronics. IIUM Press, Kuala Lumpur, pp. 97-119. ISBN 9789674181536

Ali Khan, Ahsan and Awang, Mohd Afendee and Annuar, Ahmad Azwari (2011) Surface roughness of carbides produced by water abrasive jet machining. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 556-561. ISBN 9789670225685

Alqap, Asep Sofwan Faturohman and ., Nor Hidayu and Sopyan, Iis (2011) Synthesis and characterization of sol-gel method derived zinc doped hydroxyapatite powder. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 161-166. ISBN 9789674182311

Alqap, Asep Sofwan Faturohman and Sopyan, Iis and Mazmaa, Nuur Izzati (2011) Manganese doped hydroxyapatite powder through hydrothermal method. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 155-160. ISBN 9789674182311

Ameer Amsa, Mohamad Ghazali and Ismail, Ahmad Faris (2011) Contribution of Tipu Sultan to rocket technology. In: Contributions of Early Muslim scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 143-146. ISBN 978-967-418-157-4

Amid, Azura (2011) Halal lifestyle and cancer. Halal Pages 2011/2012. pp. 54-69. ISSN 1675-2465

Amid, Azura and Ahmad, Abdul Aziz and Ahmad Raus, Raha (2011) Optimization of extraction process parameters for anti-cancer agent from Solanum Lycopersicum. In: Current research and development in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 1-9. ISBN 9789674181444

Aminanda, Yulfian and Abdullah, Nor Fazilah and Abdul Rahman, Noor Izzah (2011) Simulation study of composite structure subjected to 3 point bending load. In: Advances in Aircraft Structure. IIUM Press, Kuala Lumpur, pp. 93-100. ISBN 9789674181482

Aminanda, Yulfian and Hamid, Wan Luqman Hakim (2011) Experimental study of energy absorption capability of metallic-palm fiber-metallic hybrid composite plate. Advanced Material Research, 311-13. pp. 68-71. ISSN 1662-8985

Amuda, M.O.H. and Mridha, Shahjahan (2011) Effect of energy input on microstructure and hardness of TIG Welded AISI 430-Ferritic stainless steel. Advanced Materials Research, 264/65. pp. 390-396. ISSN 1662-8985

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2011) Exploratory study of sensitization in ferritic stainless steel welds produced via cryogenic cooling. In: International Conference on Materials Processing Technology (MAPT 2011), 2-3 June 2011, Phuket, Thailand.

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2011) Grain refinement practices in ferritic stainless steel welds. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 48-52. ISBN 9789674181642

Andan, Amelda Dianne and Asrar, Waqar and Omar, Ashraf Ali E. (2011) Aerodynamics of a hybrid airship. In: 4th International Meeting of Advances in Thermofluids (IMATT 2011), 3-4th October 2011, Hotel Avillion Legacy, Melaka.

Ani, Mohd Hanafi and Othman, Raihan (2011) Measurement of oxygen permeability in bulk alloys by internal oxidation of dilute constituent. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 100-105. ISBN 9789674181680

Anuar, Hazleen (2011) Lightweight kenaf fibre composite for automotive component. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 29-38. ISBN 9789674180218

Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Effect of fibre length on tensile properties of TPNR-Kenaf fibre composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 79-83. ISBN 9789674181673

Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Effect of processing parameters on the tensile properties of TPNR reinforced short carbon fibre composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 11-15. ISBN 9789674181673

Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Enhanced tensile strength with sulphuric treated short carbon fibre. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 74-78. ISBN 9789674181673

Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Water absorption of TPNR reinforce short carbon fibre composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 69-73. ISBN 9789674181673

Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Dynamic mechanical analysis of carbon fibre composites. In: Advances in materials engineering - volume 2. IIUM Press, Kuala Lumpur, pp. 25-30. ISBN 9789674181680

Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Surface topography of sulphuric treated carbon fibre. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 151-156. ISBN 9789674181680

Anuar, Hazleen and Kaiser, Muhammad Rejaul (2011) Comparative study on the effect of plasticizer on thermal properties of Polylactic acid. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 22-27. ISBN 9789674181673

Anuar, Hazleen and Kaiser, Muhammad Rejaul (2011) Effect of nanoclay on mechanical properties of PLA-clay nanocomposite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 84-89. ISBN 9789674181673

Anwar, Farhat (2011) Cellular radio based vehicular location finding. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 426-438. ISBN 9789670225685

Anwar, Farhat (2011) Enhanced multicast routing protocol for wireless mesh networks (WMN). In: Research Issues in Wireless Communication Networking . IIUM Press, Kuala Lumpur, pp. 38-44. ISBN 9789674181499

Anwar, Farhat (2011) Enhanced sigma protocol for high speed mobile node in IP based communication system. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 101-107. ISBN 978-967-418-149-9

Anwar, Farhat (2011) Performance evaluation of selected DHT P2p routing protocols. In: Research Issue in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 55-62. ISBN 978-967-418-149-9

Anwar, Farhat and Azad, Md. Saiful and Rahman, Md. Arafatur and Bari, S.M. Sadakatul and Masud, Muhammad Mehdi (2011) Improved link repair technique for multicast routing in Wireless Mesh Network. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Arfah, Nurul and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) CMOS Op amp testing for capacitive measuring systems application. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011), 28-30 September, Kota Kinabalu, Malaysia.

Arham, Muhammad and Syed Mokhtar, Syed Zulfauzi and Khalifa, Othman Omran (2011) Development of wearable reflectance pulse oximetry for telehealth monitoring system. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 77-82. ISBN 9789674181710

Arham, Muhammad and Syed Mokhtar, Syed Zulfauzi and Khalifa, Othman Omran (2011) Pulse oximetry design using Arduino board. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 184-190. ISBN 9789674181710

Arif, Manar Sami and Habaebi, Mohamed Hadi and Hwegy, Yousef (2011) Fine-granulated FEC code for IPTV I-frames over wireless DVB-T channels. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 277-281. ISBN 9789674181499

Arifin, Mohd Azmir and Ahmad Raus, Raha and Mel, Maizirwan (2011) Phases of cell culture. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 27-34. ISBN 9789674180713

Arifin, Mohd Azmir and Hashim, Yumi Zuhanis Has-Yun and Mel, Maizirwan (2011) Serum free medium. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 47-57. ISBN 9789674180713

Arifin, Mohd Azmir and Mel, Maizirwan (2011) Introduction. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 1-9. ISBN 9789674180713

Arifin, Mohd Azmir and Mel, Maizirwan and Ahmad Raus, Raha and Syed Hassan, Sharifah and Ideris, Aini (2011) The growth rate and viability of DF1 cell in different culture media. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 111-119. ISBN 9789674180096

Arifin, Mohd Azmir and Salim, Siti Hajar and Mel, Maizirwan (2011) Newcastle Disease Virus propagation in stirred tank bioreactor: part II. In: Recent Development Of Microcarrier For Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 171-183. ISBN 9789674180096

Arifin, Mohd Azmir and Salim, Siti Hajar and Mel, Maizirwan (2011) Newcastle Disease virus propagation in stirred tank bioreactor: part I. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 159-170. ISBN 9789674180096

Arifuzzaman, S. M. and Nordin, Anis Nurashikin and Mel, Maizirwan and Spray, David and Voiculescu, Ioana (2011) Study of cells attachment using impedance spectroscopy technique. In: ASME International Mechanical Engineering Congress and Exposition (ASME 2011), 11-17 November 2011, Denver Colorado. (In Press)

Arshad, Atika and Khan, Sheroz and Anika, Rumana Tasnim and Alam, A. H. M. Zahirul (2011) Modeling of inductive coupling transducer for activation of low wattage electronic implants. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011), 28-30 September, Kota Kinabalu, Malaysia.

Arshad, Atika and Tasnim, Rumana and Khan, Sheroz and Alam, A. H. M. Zahirul (2011) Inductive sensor. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 1-7. ISBN 9789674181710

Asih, Devi Ratna and Ismail, Ahmad Faris (2011) Oculist's contributions to cataract operation. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 126-130. ISBN 978-967-418-155-0

Asih, Devi Ratna and Shafie, Amir Akramin (2011) Al-Zahrawi contribution to medical instruments. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 131-136. ISBN 978-967-418-155-0

Astuti, Winda and Turahim, Khairiah K. and Martono, Wahyudi and Salami, Momoh Jimoh Eyiomika (2011) Path tracking of car like mobile robot. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 250-254. ISBN 9789674181529

Astuti, Winda and A. R., Kasim and Solihin, Mahmud Iwan and Aibinu, Abiodun Musa and Salami, Momoh Jimoh Emiyoka and Martono, Wahyudi (2011) Design and prototyping of inertia wheel. In: Mechatronics book series: system design and signal processing. IIUM Press, Kuala Lumpur, pp. 73-79. ISBN 9789674181734

Asuhaimi, Fauzan Abdullah and Mohd Zaki, Nur Fatin and Abdullah, Khaizuran (2011) Design of mobile phone jammer. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 223-229. ISBN 9789674181697

Ayodele Isqeel, Abdullateef and Salami, Momoh Jimoh Eyiomika (2011) Intelligent SCADA based monitoring scheme for low voltage distribution system. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 218-226. ISBN 9789674181529

Ayyad, Assma O.H. and Khalifa, Othman Omran and Mohd. Ali, M.A. (2011) An isolated character segmentation approach. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 283-287. ISBN 9789670225685

Azmi, Azlin Suhaida (2011) Should we be concern about non enviro-friendly fuel? Halal Pages 2011/2012. pp. 96-101. ISSN 1675-2465

Azmi, Mohd Hafizi and Affendy, Muhammad R. and Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa (2011) Development of an intelligent laundry system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 194-202. ISBN 9789674181765

Azram, Mohammad and Messikh, Azeddin (2011) Preliminaries. In: Calculus with single variable. IIUM Press, Kuala Lumpur, pp. 1-42. ISBN 9789674181956

Banu, Aalya and -, Sharmila Fathima and Alang Md Rashid, Nahrul Khair (2011) Determination of material depth using artificial neural network. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 264-277. ISBN 9789674181765

Bari, S. M. Sadakatil and Anwar, Farhat (2011) Path selection protocols for IEEE 802.11s wlan mesh networks. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 45-48. ISBN 978-967-418-149-9

Bashir, Saad Osman and Tawfeeq Zyoud, Abdallah Mohammed and Mahmoud Sid Ahmed, Beshir Salah Eldin (2011) Prediction of probability of bit error rate in digital communication systems. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 209-218. ISBN 9789670225814

Bello-Salau, H and Salami, A. F. and Anwar, Farhat and Islam, Md. Rafiqul (2011) Analysis of Radio Model Performance for Clustering Sensor Networks. Sensors & Transducers Journal, 128 (5). pp. 27-38. ISSN 1726-5479

Bilal, Sara Mohammed Osman Saleh and Kabbashi, Nassereldeen Ahmed (2011) Al-Zahrawi method on inflammatory swellings and tumours surgery. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 120-125.

Bilal, Sara Mohammed Osman Saleh and Mirghani, Mohamed Elwathig Saeed (2011) Inhalation and oral anesthetics: views of selected Muslim physicians. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 144-149. ISBN 978-967-418-155-0

Billah, Md. Masum and Ahmed, Mohiuddin and Farhana, Soheli (2011) A gait transition method for Hexapod robots. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 364-372. ISBN 9789670225685

Che Daud, Mohd Radzi and Abu Tahar, Khairul Adzha and Sulaiman, Mohd Rujhan (2011) The implementation of Total Quality Manangement (TQM) in Kuliyyah of Engineering, International Islamic University of Malaysia. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 269-274. ISBN 9789674181659

Che Daud, Mohd Radzi and Alies, Shamin Asyrani and Saleh, Norhayati (2011) Cost comparison analysis between strip to coil for support brake pedal at Suria Component (M) Sdn. Bhd. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 92-97. ISBN 9789674181598

Che Daud, Mohd Radzi and Mat Song, Rusdi (2011) Study the adherence of the values in the ISO 9001:2000 certified companies in Malaysia. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 84-90. ISBN 9789674181598

Che Daud, Mohd Radzi and Ramin, Ummi Huraizah (2011) Culture assessment on value based total performance assessment in Kulliyyah of Engineering of International Islamic University Malaysia. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 275-280. ISBN 9789674181659

Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) CMOS operational amplifier for capacitance to voltage converter. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 95-101. ISBN 9789674181710

Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) Design of capacitive measuring system for high frequency band sensor transducer. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 83-88. ISBN 9789674181710

Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) Mathematical model for contactless measurement. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 102-106. ISBN 9789674181710

Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) Principle of capacitance to voltage converter. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 89-94. ISBN 9789674181710

Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) A mathematical study of a thermistor astable multivibrator in a linearization technique. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 113-116. ISBN 9789674181710

Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) A study of linearization technique using a nonlinear thermistor. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 117-122. ISBN 9789674181710

Chebil, Jalel (2011) Combined source channel decoding for image transmission over noisy channels. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 108-118. ISBN 9789674181697

Chebil, Jalel and Abd Rahman, Tharek (2011) A Matlab program for predicting rain rate and rain attenuation distributions in Malaysia. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 180-185. ISBN 9789674181383

Chebil, Jalel and Abd Rahman, Tharek (2011) Rain rate conversion factor in Malaysia. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 171-179. ISBN 9789674181383

Chebil, Jalel and Abd Rahman, Tharek (2011) Rain rate distribution for microwave link design in Malaysia. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 164-170. ISBN 9789674181383

Chebil, Jalel and Hrairi, Meftah and Abushikhah, Nazih (2011) Signal analysis of vibration measurements for condition monitoring of bearings. Australian Journal of Basic and Applied Sciences, 5 (1). pp. 70-78. ISSN 1991-8178

Chebil, Jalel and Islam, Md. Rafiqul and Khadim, Ali (2011) Proposed path loss models for suburban area in Kuala Lumpur. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 157-163. ISBN 9789674181383

Chowdhury, Md. Sazzad Hossien (2011) Integration. In: Calculus with single variable. IIUM Press, Kuala Lumpur, pp. 137-168. ISBN 9789674181956

Chowdhury, Md. Sazzad Hossien (2011) Integration techniques. In: Calculus with single variable. IIUM Press, Kuala Lumpur, pp. 201-245. ISBN 9789674181956

Chowdhury, Md. Sazzad Hossien (2011) A comparison between the modified homotopy perturbation method and adomian decomposition method for solving nonlinear heat transfer equations. Journal of Applied Sciences, 11 (7). pp. 1416-1420. ISSN 1812-5662 (O), 1812-5654 (P)

Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Ismail, Ahmad Faris and Rahman, M. M. and Momani, Shaher Mohammad (2011) Exact solution for linear and nonlinear systems of PDEs by homotopy-perturbation method. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 3295-3305. ISSN 1991-8178

Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Rahman, Md. Mahmudur (2011) On the numerical solution of linear stiff IVPs by modified homotopy perturbation method. In: The 7th IMT-GT International Conference on Mathematics, Statistics and its Applications, 21 - 23 July 2011, The Pullman Bangkok King Power Hotel, Thailand.

Chowdhury, Md. Sazzad Hossien and Hassan, Talib Hashim (2011) A new reliable algorithm based on homotopy-perturbation method for power-law fin-type problems. Australian Journal of Basic and Applied Sciences, 5 (4). pp. 44-50. ISSN 1991-8178

Chowdhury, Md. Sazzad Hossien and Rahman, M. M. (2011) An accurate solution to the Lotka-Volterra equations by modified homotopy perturbation method. In: The International Conference on Mathematical and Computational Biology 2011 (ICMCB2011), 12-14 April, 2011, Melaka, malaysia.

Dahlan, Yuhelda and Purwanto, Hadi and Saleh, Nuryadi and , Pramusanto (2011) Effect of stabilizer addition on crystal formation of zirconia synthesized from zircon sand. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 20-26. ISBN 978-967-418-164-2

Danzomo, Bashir Ahmed and Shuriye, Abdi Omar (2011) Al-Khazini in on the development of hydrostatic balance and its functionality. In: Contributions of early Muslim scientists to engineering sciences and related studies. IIUM Press, Kuala Lumpur, pp. 147-154. ISBN 978-967-418-157-4

Darsivan, Fadly Jashi and Martono, Wahyudi and Faris, Waleed Fekry (2011) Neural network controlled of an active engine mounting system using a nonlinear electromagnetic. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 194-202. ISBN 9789670225685

Dass, Sreedharan Baskara and Hassan Abdalla Hashim, Aisha and Hussien, Loay Faisal (2011) ASIC design flow. In: Selected topics in advanced electronics. IIUM Press, Kuala Lumpur, pp. 348-354. ISBN 9789674181536

Dass, Sreedharan Baskara and Hassan Abdalla Hashim, Aisha and Hussien, Loay Faisal (2011) Electronic Design Automation tools. In: Selected topics in advanced electronics. IIUM Press, Kuala Lumpur, pp. 355-364. ISBN 9789674181536

Donzomo, Bashir Ahmed and Salami, Momoh Jimoh Emiyoka (2011) Mathematical modeling of counter flow scrubber using Eulerian-Lagrangian approach. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 34-41. ISBN 9789674181734

Dyuti, Sarker and Mridha, Shahjahan and Shaha, Sugrib Kumar (2011) Formation of Ti-Al-N dispersed layer on steel surface by TIG melting in a reactive environment. Advanced Materials Research, 264-26. pp. 1433-1438. ISSN 1662-8985

Echrif, Salah B. M. and Hrairi, Meftah (2011) Research and progress in incremental sheet forming processes. Materials and Manufacturing Processes, 26. pp. 1404-1414. ISSN 1532-2475 (O), 1042-6914 (P)

Edy Sutjipto, Agus Geter and Faris, Waleed Fekry and Adesta, Erry Yulian Triblas and Hanim, Hafizah (2011) Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator. Applied Mechanics and Materials, 84-85. pp. 392-395. ISSN 1660-9336

El-Awad, M.M. and Ahmed, Mirghani Ishak (2011) Theoretical and experimental evaluation of LPG as refrigerant for domestic refrigerators and freezers. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 169-178. ISBN 9789674181581

El-Darymli, Khalid Khalil and Khalifa, Othman Omran and Enemosah, Hassan (2011) Speech to Sign Language Interpreter System (SSLIS). In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 313-321. ISBN 9789674181611

Elfaki, Faiz Ahmed Mohamed and Azram, Mohammad (2011) Infinite series. In: Calculus with single variable. IIUM Press, Kuala Lumpur, pp. 246-266. ISBN 9789674181956

Elsayed, Omer Ali and Omar, Ashraf Ali E. and Asrar, Waqar and Kwon, Kijung (2011) Effect of differential spoiler settings (DSS) on the wake vortices of a wing at high-lift-configuration (HLC). Aerospace Science and Technology, 15 (7). pp. 555-566. ISSN 1270-9638

Elsheikh, Elfatih A. A. and Islam, Md. Rafiqul and Al-Khateeb, Khalid A. Saeed and Alam, A. H. M. Zahirul and Omer Elshaikh, Zain Elabdin (2011) A proposed vertical path adjustment factor for dust storm attenuation prediction. In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.

Fadli, Ahmad and Sopyan, Lis and Mel, Maizirwan (2011) The effect of hydroxyapatite addition on biocompatibility of porous alumina microcarriers for vero cell culture. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, International Islamic University Malaysia, pp. 33-42. ISBN 9789674180096

Farhana, Soheli and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) MVL ADC design and simulation. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 153-158. ISBN 9789674181710

Farhana, Soheli and Alam, A. H. M. Zahirul and Khan, Sheroz (2011) MVL design and current mode circuit elements. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 159-163. ISBN 9789674181710

Farhana, Soheli and Alam, A. H. M. Zahirul and Khan, Sheroz and Rahman, Mohammed Ataur (2011) Design of a current comparator for quaternary multi valued analog to digital converter. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 28-30 September, Kota Kinabalu, Malaysia.

Faris, Waleed Fekry (2011) Introduction to machine element design for engineers. IIUM Press, Kuala Lumpur. ISBN 9789675272936

Faris, Waleed Fekry and Martono, Wahyudi and H.J Hajjaj, Omar (2011) Design and implementation of fuzzy control for two link flexible manipulator. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 209-214. ISBN 9789670225685

Faris, Waleed Fekry and Rakha, Hesham and Kafafy, Raed Ismail and Mohammed Idres, Moumen and Elmoselhy, Salah (2011) Vehicle fuel consumption and emission modelling: an in-depth literature review. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 318-392. ISSN 1745-6444 (O), 1745-6436 (P)

Gamage, Nuwan and Chow, Kuang Ye and Akmeliawati, Rini and Demidenko, Serge (2011) Gaussian Process Dynamical Models for Hand Gesture Interpretation in Sign Language. Pattern Recognition Letters, 32 (15). pp. 2009-2014. ISSN 01678655

Ganiev, Inomjon and Mukhamedov, Farrukh (2011) A weighted ergodic theorem for contractions defined on Banach-Kantorovich lattice. In: Recent achievements in dynamical systems: proceedings of Department of Computational and Theoretical Sciences, Faculty of Science, IIUM. IIUM Press, Kuala Lumpur, pp. 71-76. ISBN 9789674182014

Ghazali, Nazwan and Shuriye, Abdi Omar (2011) Al-Majusi contribution in the understanding of the cardiovascular system and blood circulation. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 3-6. ISBN 978-967-418-155-0

Gunawan, Teddy Surya and ., Abdul Mutholib and Kartiwi, Mira (2011) Development of final year project portal for engineering program. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 71-80. ISBN 9789674181611

Gunawan, Teddy Surya and Abdul Wahab, Norashikin (2011) Protein coding identification of human DNA sequence using wavelet. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 274-291. ISBN 9789670225814

Gunawan, Teddy Surya and Abdullah, Norakmal (2011) Feature extraction for automatic fetus age estimation for ultrasound images using ellipse model. In: Selected readings in computing and telecomunications. IIUM Press, Kuala Lumpur, pp. 143-167. ISBN 9789670225814

Gunawan, Teddy Surya and Ahmad, Muhammad (2011) Spherical POV LED display using PIC 16F628. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 235-254. ISBN 9789670225814

Gunawan, Teddy Surya and Bacar, Elkabir Ansoya (2011) Parallel algorithms for edge detection on cluster computer. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 189-208. ISBN 9789670225814

Gunawan, Teddy Surya and Hassan Dualeh, Ismail (2011) Noise reduction using Kalman filter. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 168-188. ISBN 9789670225814

Gunawan, Teddy Surya and Jenalis, Mohd. Hanis (2011) Fingerprint authentication system using MATLAB. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 64-77. ISBN 9789670225814

Gunawan, Teddy Surya and Kartiwi, Mira and Mulyana, Willy Wahyu (2011) Hajj crowd simulation based on intelligent agent. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 284-291. ISBN 9789674181765

Gunawan, Teddy Surya and Khalifa, Othman Omran and Shafie, Amir Akramin and Ambikairajah, E. (2011) Speech coding using compressive sensing on a multicore system. In: Mechatronics Book Series: System design and signal processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 194-201. ISBN 9789674181321

Gunawan, Teddy Surya and Mohamad, Siti Aisyah (2011) IIUM car sticker recognition using phase based template matching algorithm. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 308-315. ISBN 9789670225814

Gunawan, Teddy Surya and Saleem, Azizullzah (2011) Performance evaluation of lossless speech and audio compression algorithms. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 78-90. ISBN 9789670225814

Habaebi, Mohamed Hadi and Elashaal, Zahra A. (2011) Transmission power consumption management for zigbee healthnets. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 300-305. ISBN 978-967-418-149-9

Halim, Zahurin and Mohamad, Nurshazana (2011) Fabrication of biomass pellet from mesocarp fiber. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 65-70. ISBN 9789674181680

Halim, Zahurin and Abdul Rahman, Siti Khadijah (2011) Fabrication of kenaf sandwich panel. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 71-77. ISBN 9789674181680

Halim, Zahurin and Ahmad, Zuraida and Md Yusof, Fauziah (2011) Investigation on the effect of water immersion on cotton albumen composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 178-181. ISBN 9789674182311

Halim, Zahurin and Basri, Shahnor and Ajir, Mohd Ramli (2011) Numerical and experimental investigation of peel strength of composite sandwich structures. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 182-189. ISBN 9789674182311

Halim, Zahurin and Mohamad, Norshazana and Mohd Noh, Nabiha (2011) The physical properties of biomass pellet from mesocarp and EFB fibre. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 49-59. ISBN 9789674180218

Halim, Zahurin and Mohd Noh, Nabiha and Mohamad, Nurshazana (2011) Characteristics of oil palm biomass via mixture of Empty Fruit Bunch (EFB) fiber and mesocarp fiber. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 45-48. ISBN 9789674182311

Halim, Zahurin and Taib, Meor Mohd Adli (2011) Finite element analysis of interlaminar stresses in edge delamination. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 190-195. ISBN 9789674182311

Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2011) Improving the efficiency of micronozzle by heated sidewalls. In: 4th International Meeting of Advances in Thermofluids (IMATT 2011), 3-4th October 2011, Hotel Avillion Legacy, Melaka.

Hameed, Amar Hasan and Kafafy, Raed Ismail (2011) Generalized one-dimentional flow inside thermo-electrically controlled micronozzle. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 394-402. ISBN 9789670225685

Hameed, Shihab A. (2011) Computers and electronic devices waste: analysis and solution. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 149-155. ISBN 9789674181611

Hameed, Shihab A. (2011) Computers and electronic devices waste: fundamental facts. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 139-148. ISBN 9789674181611

Hameed, Shihab A. (2011) Effect of internet drawbacks on moral and social values of users in education. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 372-380. ISSN 1991-8178

Hameed, Shihab A. (2011) Eliminating Internet weakness in education. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 29-36. ISBN 9789674181611

Hameed, Shihab A. (2011) Framework for comprehensive Hajj model with ICT. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 109-119. ISBN 9789674181611

Hameed, Shihab A. (2011) Hajj and information technologies: analytical studies. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 101-107. ISBN 9789674181611

Hameed, Shihab A. (2011) Harmful data factors that affect Internet's users in educational industry. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 466-471. ISBN 9789670225685

Hameed, Shihab A. (2011) ICT and environmental problem. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 157-172. ISBN 9789674181611

Hameed, Shihab A. (2011) ICT and evironmental problem. In: Computing for Human Services. IIUM Press, Kuala Lumpur, pp. 157-164. ISBN 978-967-418-161-1

Hameed, Shihab A. (2011) Improving software testing by using statictical methods to general multi-structures test data. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 414-425. ISBN 9789670225685

Hameed, Shihab A. (2011) Internet impact on education. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 21-27. ISBN 9789674181611

Hameed, Shihab A. (2011) New model for software engineering ethical principles. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 91-99. ISBN 9789674181611

Hameed, Shihab A. (2011) Planning future of higher education in developing and Islamic world. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 13-19. ISBN 9789674181611

Hameed, Shihab A. (2011) Software engineering and ethical values. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 83-90. ISBN 9789674181611

Hameed, Shihab A. (2011) Status of higher education in developing and Islamic world. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 3-12. ISBN 9789674181611

Hameed, Shihab A. (2011) Strategy for green ICT: an Islamic view. In: Computing for Human Services. IIUM Press, Kuala Lumpur, pp. 165-172. ISBN 978-967-418-161-1

Hameed, Shihab A. and A. Badurik, Waleed (2011) Fundamental to medical data centers. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 175-183. ISBN 9789674181611

Hameed, Shihab A. and A.Al-Abbasi, Abdul Majid (2011) Intelligent generator for semi-actual data. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 403-413. ISBN 9789670225685

Hameed, Shihab A. and Abdulla, Shaima and Ershad, Mohd and Zahudi, Fauzan and Hassan Abdalla Hashim, Aisha (2011) New automobile monitoring and tracking model: Facilitate model with handhelds. In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.

Hameed, Shihab A. and Aliyu, B.A (2011) Integrated emergency and guidance system based on WiMAX wireless technology (IEGSW). In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 458-465. ISBN 9789670225685

Hameed, Shihab A. and Aliyu, B.A (2011) Wireless technology to secure emergency and guidance. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 237-244. ISBN 9789674181611

Hameed, Shihab A. and Badurik, Waleed A. (2011) Authentication enhancement for medical data centers. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 245-254. ISBN 9789674181611

Hameed, Shihab A. and Badurik, Waleed A. (2011) Integrated authentication model: face verification. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 255-260. ISBN 9789674181611

Hameed, Shihab A. and Chishti, Mohammad Ahsan (2011) The power of web portals as a gateway to resources and services for industry. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 480-485. ISBN 9789670225685

Hameed, Shihab A. and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2011) Automobile monitoring and tracking. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 287-294. ISBN 9789674181611

Hameed, Shihab A. and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2011) Computer implementable Quick Fourier Transform (QFT) for engineering educators. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 53-61. ISBN 9789674181611

Hameed, Shihab A. and M. Sharifudeen, Shahina Shabnam and Chek Nuh, Nur Hafizah and Salim, Nur Huda and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran (2011) Web-Based Database and SMS to Facilitate Healthcare Medical Emergency. In: Australasian Workshop on Health Informatics and Knowledge Management (HIKM 2011),, 17 - 20 January 2011, Curtin University, Perth, Australia.

Hameed, Shihab A. and M. Sharifudeen, Shahina Shabnam and Chek Nuh, Nur Hafizah and Salim , Nur Huda (2011) Interactive web-based model for medical emergency. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 209-219. ISBN 9789674181611

Hameed, Shihab A. and Miho, Vladimer (2011) Mobile web model to serve healthcare. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 221-228. ISBN 9789674181611

Hameed, Shihab A. and Mohd Sharifudeen, Shahina Shabnam and Chek Nuh, Nur Hafizah and Salim, Nur Huda and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran (2011) SMS to facilitate healthcare and emergency. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 229-234. ISBN 9789674181611

Hameed, Shihab A. and Mustafa, Shazana and ., Aina Mardhiyah and Miho, Vladimer (2011) Developing EPMR to serve effective patient monitoring database. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 203-208. ISBN 9789674181611

Hameed, Shihab A. and Mustafa, Shazana and ., Aina Mardhiyah and Miho, Vladimer and Hassan Abdalla Hashim, Aisha (2011) Electronic patient medical record to facilitate patient monitoring. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 195-202. ISBN 9789674181611

Hameed, Shihab A. and Yuchoch, Habib and Al-Khateeb, Wajdi Fawzi Mohammed (2011) Confidentiality to service medical emergency model. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 261-268. ISBN 9789674181611

Hameed, Shihab A. and Zainazlan, Ahmed Fathi and Nor Rahim, Herman Sazwan (2011) Fundamental to password based security. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 269-275. ISBN 9789674181611

Hameed, Shihab A. and Zainazlan, Ahmed Fathi and Nor Rahim, Herman Sazwan (2011) Graphical password security model. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 277-286. ISBN 9789674181611

Hanouf, Zahir (2011) Modal analysis of car panels using finite element analysis. In: Regional Engineering Postgraduate Conference (EPC 2011), 4th-5th October 2011, Bangi, Selangor.

Hasan, M and Saeed, Rashid Abdelhaleem and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran (2011) Self-organized synchronization for femtocell network. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 155-167. ISBN 9789674181420

Hasan, M and Saeed, Rashid Abdelhaleem and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Mahmoud, Omer and Islam, Shayla (2011) Time synchronization protocols and approaches. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 261-264. ISBN 9789674181420

Hasan, Mohammad and Saeed, Rashid Abdelhaleem and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Islam, Shayla (2011) Femtocell network synchronization. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 232-244. ISBN 978-967-418-149-9

Hasan, Mohammad Kamrul and Saeed, Rashid Abdelhaleem and Hassan Abdalla Hashim, Aisha and Islam, Shayla and Mahmoud, Omer and Khalifa, Othman Omran and Hameed, Shihab A. and Ismail, Ahmad Fadzil (2011) An Investigation of Femtocell Network Synchronization. In: 2011 IEEE Conference on Open Systems , 25-28 September, 2011, Langkawi, Kedah.

Hasan, Talib Hashim and Chowdhury, Md. Sazzad Hossien and Prayoto, . (2011) Solving Nonlinear Algebraic Problem Using Newton Homotopy Differential Equation. Australian Journal of Basic and Applied Sciences, 5 (4). pp. 56-59. ISSN 1991-8178

Hasbullah, Nurul Fadzlin and David, John P. R. (2011) Reverse leakage current mechanisms in quantum dot laser structures. In: RSM 2011, 28-30 Sep 2011.

Hashim, Yumi Zuhanis Has-Yun (2011) Safe=(Halal + Toyyebah): personal care products, please! Muslim consumers are still facing dilemma in choosing halal cosmetics... Halal Pages 2011/2012. pp. 60-65. ISSN 1675-2465

Hashim, Yumi Zuhanis Has-Yun and Mel, Maizirwan and Mohd. Salleh, Hamzah and Ahmad Nor, Yusilawati and Othman, Siti Hajar and Wan Abdul Razak, Wan Yusra Hannanah (2011) Serum in mammalian cell culture: weighing the challenges of bioprocessing, ethics and animal welfare. In: 2nd International Conference on Professional Ethics and Education in Engineering 2011 (ICEPEE'11), 17th-19th May 2011, Kuala Lumpur.

Hassan, Abdallah and Mahmoud, Omer and Hassan Abdalla Hashim, Aisha and Al-Khateeb, Wajdi Fawzi Mohammed (2011) MPLS and traffic engineering. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 41-44. ISBN 9789674181420

Hassan, Noor Azlina and Ahmad, Sahrim and Rasid, Rozaidi and Hassan, Norita (2011) Preparation and characterization of Thermoplastic Natural Rubber (TPNR) nanocomposites. In: Advances in materials engineering. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 1-5. ISBN 9789674181673

Hassan, Noor Azlina and Ahmad, Sahrim and Rasid, Rozaidi and Hassan, Norita (2011) The effect of processing parameter on tensile properties of thermoplastic natural rubber nanocomposites. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 58-63. ISBN 9789674181673

Hassan, Noor Azlina and Hasan, Norita (2011) Polymer clay nanocomposites: part II - synthesis of polymer nanocomposites. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 115-119. ISBN 9789674181680

Hassan, Noor Azlina and Hassan, Norita (2011) Polymer clay nanocomposites: part I. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 6-10. ISBN 9789674181673

Hassan, Noor Azlina and Hassan, Norita and Ahmad, Sahrim and Rasid, Rozaidi (2011) Comparison of mechanical properties between untreated and sulphuric acid treated short carbon fiber reinforced Thermoplastic Natural Rubber (TPNR) composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 64-68. ISBN 9789674181673

Hassan, Noor Azlina and Hassan, Norita and Ahmad, Sahrim and Rasid, Rozaidi (2011) The effect of processing parameters on tensile properties Empty Fruit Bunch (EFB) fiber reinforced thermoplastic natural rubber composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 150-154. ISBN 9789674182311

Hassan, Sajid and Chishti, Mohamad Ahsan and Anwar, Farhat and Elamvazuthi, Chandran (2011) Web based documentation system for dynamic roadmaps. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 472-479. ISBN 9789670225685

Hassan Abdalla Hashim, Aisha and Al-Khateeb, Wajdi Fawzi Mohammed and Anwar, Farhat and Mohd Aman, Azana Hafizah (2011) HMIPV6 based approaches for mobility management. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 36-40. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Alshaikhli, Imad Fakhri Taha and Mohd Aman, Azana Hafizah and Ali, Sellami (2011) The study of multicast listener discovery. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 27-31. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Anwar, Farhat and Mohd, Shaffiah and Liyakthalikhan, Hatina Banun and Hassan, Sajid (2011) Performance evaluation of hierarchical mobile IP. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 500-508. ISBN 9789670225685

Hassan Abdalla Hashim, Aisha and Hameed, Shihab A. and Daoud, Jamal Ibrahim (2011) Introduction to multicast mobility management. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 2-8. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Mohd Aman, Azana Hafizah and Anwar, Farhat and Hameed, Shihab A. (2011) Operation of context transfer protocol. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 15-20. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Mohd Aman, Azana Hafizah (2011) Architecture of M-HMIPV6/CXTP. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 53-57. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Mohd Aman, Azana Hafizah (2011) Development of the service recovery time and signaling cost function. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 83-87. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Mohd Aman, Azana Hafizah (2011) Message format of M-HMIPV6/CXTP. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 70-75. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Mohd Aman, Azana Hafizah (2011) Service recovery of multicast hierarchical mobile IPV6 with context transfer. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 101-105. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Mohd Aman, Azana Hafizah (2011) The study of signaling cost of M-HMIPV6 with context transfer. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 106-111. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Mohd Aman, Azana Hafizah and Ali, Sellami and Khalifa, Othman Omran (2011) Introduction to mobility multicast schemes. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 42-47. ISBN 9789674181406

Hassan Abdalla Hashim, Aisha and Mohd Aman, Azana Hafizah (2011) Evaluation methods in computer networking. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 88-92. ISBN 9789674181406

Hawari, Iman and Daoud, Jamal Ibrahim (2011) Al-Razi's understanding and curing of smallpox and measles. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 35-38. ISBN 978-967-418-155-0

Hawari, Iman and Shuriye, Abdi Omar (2011) Al-Battani's contributions to astronomy. In: Contributions of early Muslim scientists to engineering sciences and related studies. IIUM Press, Kuala Lumpur, pp. 3-7.

Hawlader, Mohammad Nurul Alam (2011) Desalination of seawater to provide fresh water. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 9-15. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam (2011) Engineering design: an approach to the development creativity. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 132-139. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam (2011) The Impact of energy utilization on environment. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 1-8. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and J. Chowdhury, Md. Shafique (2011) Moisture migration in a grain column subjected to drying. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 30-37. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Jahangeer, K. A. and Shaochun, Ye and Choy, Tack Hoon (2011) A solar heat-pump system for air-conditioning, water heating and drying. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 126-131. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Jiahe, Pan (2011) Drying under inert environment: the quality of Mango and Rockmelon. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 47-59. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Lee, Hwee Peng (2011) Solar drying of guavas, papayas and apples. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 38-46. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Lee, Poh Seng and Chua, Kok Kiang (2011) Performance of different photovoltaic cells operating under the meteorological conditions of Singapore. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 229-239. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Leong , Chiing Yang (2011) A solar assisted desalination system using heat pump. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 16-29. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Rahman, S. M. A. and Jahangeer, K. A. (2011) Optimization and economic analysis of a solar assisted heat pump drying system. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 103-116. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Seng, Lee Poh and Kiang, Chua Kok (2011) Performance of different photovoltaic cells operating under the meteorological conditions of Singapore. In: 4th IMAT 2011:International Meeting of Advances in Thermofluids, 3-4 October 2011, Melaka, Malaysia. (Unpublished)

Hawlader, Mohammad Nurul Alam and Shaochun, Ye (2011) Optimization of an integrated solar heat-pump system. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 60-68. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Shaochun, Ye (2011) An economic analysis of a solar assisted heat pump system for cooling, water heating and drying. In: 3rd Regional Symposium on Engineering and Technology 2011, 21-23 November 2011, Kuching, Sarawak, Malaysia. (Unpublished)

Hawlader, Mohammad Nurul Alam and Smita, Panga (2011) An experimental study of a phase change storage system. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 23-29. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Ullah, M. Zakir (2011) A solar heat pump water heater for rural hospitals. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 117-125. ISBN 9789674181581

Hawlader, Mohammad Nurul Alam and Ullah, MD. Zakir and Than Htut, Maung (2011) A low temperature flat plate solar collector. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 53-59. ISBN 9789674181581

Hedi, Chtourou and Meftah, Hrairi (2011) Predicting density distribution in Green compacts using finite element simulations. Australian Journal of Basic and Applied Sciences, 5 (3). pp. 60-68. ISSN 1991-8178

Helmi, Irfan (2011) Numerical analysis to characterize triaxiality value of adhesive joint due to particular load configuration. Part 1: butt joint. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 194-201. ISBN 9789674181598

Helmi, Irfan (2011) Numerical analysis to characterize triaxiality value of adhesive joint due to particular load configuration. Part 2: cleavage and scarf joint. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 202-211. ISBN 9789674181598

Herman, Sukreen Hana and Ani, Mohd Hanafi and Horita, Susumu (2011) X-ray photoelectron studies on the surface chemical states of yttria-stabilized zirconia thin film in aqueous acid hydrofluoric. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181680

Hoda, Asif (2011) Numerical simulation of a simple couette flow in MATLAB using explicit and implicit finite difference schemes. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 7-22. ISBN 9789674180201

Hossain, Altab and Rahman, Mohammed Ataur and Hossen, Jakir and Iqbal, A.K.M. Asif (2011) Application of fuzzy logic approach for an aircraft model with and without winglet. International Journal of Aerospace and Mechanical Engineering, 5 (4). pp. 224-232. ISSN 2010-3794 (O), 2010-3786 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Cushion pressure control system for an intelligent air-cushion track vehicle. Journal of Mechanical Science and Technology, 25 (4). pp. 1035-1041. ISSN 1976-3824 (O), 1738-494X (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Nonlinear controller of an air-cushion system for a swamp terrain vehicle: fuzzy logic approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225. pp. 721-734. ISSN 0954-4070

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Study of Fuzzy Controller to control vertical position of an air-cushion tracked vehicle. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. World Academy of Science, Engineering and Technology, 75. pp. 50-57. ISSN 2010-376X

Hossain, Mahbuba and Khan, Md. Raisuddin and Billah, Masum (2011) Development of robotic manipulator to assist human using brain signal. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 198-203. ISBN 9789674181529

Hrairi, Meftah and Baharom, Badrul Hanafi (2011) Design and modeling of silicon MEMS accelerometer. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hrairi, Meftah and Chtourou, Hedi and Gakwaya, Augustin and Guillot, Michel (2011) Modeling the powder compaction process using the finite element method and inverse optimization. The International Journal of Advanced Manufacturing Technology, 56 (5-8). pp. 631-647. ISSN 0268-3768

Hrairi, Meftah and Echrif, Salah B. M. (2011) Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hrairi, Meftah and Elias, M. A. (2011) Detection of foreign bodies in canned foods using ultrasonic testing. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Htike, Kyaw Kyaw and Khalifa, Othman Omran and Islam, Md. Rafiqul (2011) Time-delay neural network for rainfall forecasting. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 186-192. ISBN 9789674181383

Htike@Muhammad Yusof, Zaw Zaw and Egerton, Simon and Kuang, Ye Chow (2011) Model-free viewpoint invariant human activity recognition. In: International MultiConference of Engineers and Computer Scientists 2011 (IMECS 2011), , 16-18 March 2011, Hong Kong.

Htike@Muhammad Yusof, Zaw Zaw and Egerton, Simon and Kuang, Ye Chow (2011) Monocular viewpoint invariant human activity recognition. In: IEEE Conference on Robotics, Automation and Mechatronics (RAM), 17-19 September 2011, Qingdao, China.

Htike@Muhammad Yusof, Zaw Zaw and Egerton, Simon and Kuang, Ye Chow (2011) A monocular view-invariant fall detection system for the elderly in assisted home environments. In: 7th International Conference on Intelligent Environments (IE), 25-28 July 2011, Notthingham, UK.

Hussien, Loay F. and Hassan Abdalla Hashim, Aisha and Anwar, Farhat and Khalifa, Othman Omran and Hameed, Shihab A. (2011) An enhanced scheme for QoS in mobile IPv6 environment. In: 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM'11) , 17 - 19 May 2011, Kuala Lumpur.

Hussien, Loay F. and Hassan Abdalla Hashim, Aisha and Anwar, Farhat and Khalifa, Othman Omran and Hameed, Shihab A. and Al-Khateeb, Wajdi Fawzi Mohammed (2011) Simulation evaluation of DiffServ approach integrated in MIPv6 networks. Australian Journal of Basic and Applied Sciences, 5 (5). pp. 386-396. ISSN 1991-8178

Ibrahim, Loay and Hassan Abdalla Hashim, Aisha and Anwar, Farhat and Khalifa, Othman Omran and Mahmoud, Omer and Hameed, Shihab A. and Daoud, Jamal Ibrahim (2011) An enhanced scheme to support QoS in MIPv6 based networks using DiffServ. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 447-455. ISSN 1991-8178

Ibrahim, Siti Noorjannah (2011) The quadrupole microelectrode design on a multilayer biochip for dielectrophoretic trapping of single cells. MIcroelectronic Engineering, 97. pp. 369-374. ISSN 0167-9317

Ibrahimy, Muhammad Ibn (2011) Emergency medical care information system for fetal monitoring. In: International Conference on Computing in Cardiology 2010, 26 - 29 September 2010, Belfast, Northern Ireland, UK.

Ibrahimy, Muhammad Ibn and Hasan , M. A. and Motakabber, S. M. A. (2011) A network based fetal ECG monitoring algorithm. Australian Journal of Basic and Applied Sciences, 5 (11). pp. 1505-1512. ISSN 1991-8178

Ibrahimy, Muhammad Ibn and Khalifa, Othman Omran (2011) Neural network classifier for hand motion detection from EMG signal. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 536-541.

Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. (2011) Network based telemedicine for fetal ECG monitoring. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 185-194. ISBN 9789674181611

Idres, Moumen (2011) Three-dimensional analysis of compressors. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 15-19. ISBN 9789674181451

Idres, Moumen (2011) Two-dimensional analysis of compressors. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 9-14. ISBN 9789674181451

Ihsan, Sany Izan and Farid, Khairussani and Mel, Maizirwan and Mohiuddin, A. K. M. (2011) Analysis of engine performance with enhanced fuel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 147-155. ISBN 9789674181581

Ihsan, Sany Izan and Sulaiman , Nabila and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with NGV. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 140-146. ISBN 9789674181581

Iis, Sopyan (2011) Thermal analysis on hydroxyapatite synthesis through mechanochemical method. IFMBE proceedings, 35. pp. 108-111. ISSN 16800737

Iqbal, A. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2011) Designing human robot interaction for emotionally expressive robotic head AMIR-iii. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 32-37. ISBN 9789674181529

Iqbal, Mohammad (2011) Metabolic energy of manual lifting in manufacturing industry. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 213-219. ISBN 9789674181598

Ishak, Norazah and Khan, Ahsan Ali (2011) Recent developments in EDM. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 46-52. ISBN 9789674181659

Islam, Md. Rafiqul and Al-Khateeb, Khalid A. Saeed and Khan, Sheroz and Dao, Hassan (2011) Rain fade slope prediction model based on satellite data measured in Malaysia. In: Antennas and Propagation: Modelling, Simulation and Measurements. IIUM Press, Kuala Lumpur, pp. 303-309. ISBN 9789674181383

Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and J. Khan, Muhammad Feroze Akbar and Al-Karaki, Shaker MM. (2011) Design of symmetrical fed patch UWB antenna using slotted partial ground and stairs. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 33-39. ISBN 9789674181383

Islam, Md. Rafiqul and Al-Karaki, Shaker MM. and J. Khan, Muhammad Feroze Akbar (2011) Design of symmetrical fed patch UWB antenna with tuning stub and symmetrical slotted ground. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 40-48. ISBN 9789674181383

Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and J. Khan, Muhammad Feroze Akbar and Al-Karaki, Shaker MM. (2011) Design of symmetrical fed patch UWB antenna using partial ground and stairs. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 22-32. ISBN 9789674181383

Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and J. Khan, Muhammad Feroze Akbar and Al-Karaki, Shaker MM. (2011) Design of unsymmetrical fed patch UWB antenna with unsymmetrical slotted ground. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 49-55. ISBN 9789674181383

Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and Khalifa, Othman Omran and Abdullah, Khaizuran and A. Haji, Ibrahim (2011) Design of linear array antenna for smart antenna application. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 121-136. ISBN 9789674181383

Islam, Md. Rafiqul and Elsheikh, Elfatih A. A. and Zahirul Alam, A. H. M. and Khalifa, Othman Omran (2011) Proposing a horizontal path adjustment factor for microwave link's attenuation prediction based on the analysis of dust storm behavior. In: 10th Malaysia International Conference on Communications (MICC)11), 2-5 October 2011, Sutera Habour Resort, Kota Kinabalu, Malaysia.

Islam, Shayla and Hassan Abdalla Hashim, Aisha and Saeed, Rashid Abdelhaleem and Khalifa, Othman Omran and Hasan, Mohammad K. and Mahmoud, Omer and Daoud, Jamal Ibrahim and Hameed, Shihab A. (2011) Mobility management schemes in NEMO to achieve seamless handoff: a qualitative and quantitative analysis. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 390-402. ISSN 1991-8178

Ismail, Ahmad Faris and Ahmed, Mirghani Ishak and Abakrb, Yousif A. (2011) CFD analysis of an evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 156-162. ISBN 9789674181581

Ismail, Roslina and Yaacob, Iskandar Idris (2011) Fabrication of nickel aluminide intermetallic-alumina nanocomposite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 172-177. ISBN 9789674182311

Ismail Khan, Zuhani and Islam, Md. Rafiqul (2011) Smart antenna design: An overview. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 486-492. ISBN 9789670225685

Isqeel, Abdullateef Ayodele and Daoud, Jamal Ibrahim (2011) Contributions of Ashraf Ali Thanwi to mental disease treatment. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 49-53. ISBN 978-967-418-155-0

Isqeel , Abdullateef Ayodele and Faris, Waleed Fekry (2011) Nasir al-Din al-Tusi's understanding of trigonometry. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 58-64. ISBN 978-967-418-157-4

Issa, Sinzobakwira and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2011) H.264/AVC video coding tools and functions. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 107-115. ISBN 978-967-418-160-4

Izuddin, Ismah and Kamaruddin, Mohd. Hanif and Nordin, Anis Nurashikin (2011) Modeling of the reliability baseline for process control monitoring kerf structures. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 28-30 September, Kota Kinabalu, Malaysia.

J. Khan, Muhammad Feroze Akbar and Al-Karaki, Shaker MM. and Islam, Md. Rafiqul (2011) Design procedure for microstrip patch antenna. In: Antennas and propagation: Modelling, simulation and measurements. IIUM Press, Kuala Lumpur, pp. 13-21. ISBN 9789674181383

J. Khan, Muhammad Feroze Akbar and Al-Karaki, Shaker MM. and Islam, Md. Rafiqul (2011) Patch antenna parameters for ultra wideband design. In: Antennas and propagation: Modelling, simulation and measurements. IIUM Press, Kuala Lumpur, pp. 6-12. ISBN 9789674181383

J.Khan, Muhammad Feroze Akbar and Alkaraki , Shaker and Islam, Md. Rafiqul (2011) Ultra wideband antennas. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 1-5. ISBN 9789674181383

Ja'afar, Ja'afar Nuhu and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Syed Hassan, Sharifah and Idreis, Aini (2011) The study of NDV Titer using different cell lines in T-Flask culture. In: Recent Development of Microcarrier For Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 159-170. ISBN 9789674180096

Jaafar, Israd Hakim and Abdul Rahman, Nur Atiqah and Banu, Asfana and Mohammad , Yeakub Ali (2011) Focused ion beam micromachining: technology and application. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 77-82. ISBN 9789674181628

Jamal, N.A. and Anuar, Hazleen and Razak, S.B.A. (2011) Modification of tensile and impact properties of crosslinked rubber toughened nanocomposites via electron beam irradiation. Canadian Journal on Scientific & Industrial Research, 2 (3). pp. 95-101.

Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Effect of maleic anhydride polyethylene on damping properties of HDPE/EPDM nanocomposite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 16-21. ISBN 9789674181673

Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Effects of MAPE and EB irradiation techniques on the mechanical properties of crosslinked rubber toughened nanocomposites. Journal of Rubber Research, 14 (4). pp. 200-215. ISSN 1511-1768

Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Tensile and impact properties enhancement of crosslinked high density polythlene and ethylene propylene diene monomer nanocomposites via electron beam irradiation. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 62-81. ISBN 9789670225876

Jamal, Parveen (2011) The Islamic perspective of Halal chocolates. Halal Pages 2011/2012. pp. 86-91. ISSN 1675-2465

Jamal, Parveen and Alam, Md. Zahangir and ., Nur Aneem Fadza (2011) Isolation and screening of potential microorganism for bioremediation of hydrocarbon contaminated sites. In: Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur, pp. 106-112. ISBN 9789674181505

Jamal, Parveen and Azmi, Saiful Mohammad Nizam and Amid, Azura (2011) Qualitative and quantitative analysis of anti-gout from Carica papaya leaves. In: Current Research and Development in Biotechnology Engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 306-315. ISBN 9789674181512

Jamal, Parveen and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Ahmad Raus, Raha (2011) Optimization of process parameters using response surface design on distribution coefficient of lactic acid. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, International Islamic University Malaysia, pp. 125-139. ISBN 9789674180935

Jamal, Parveen and Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Othman, Siti Fatiha (2011) Effect of process parameters on distribution coefficient of lactic acid by using Alamine 336. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, International Islamic University Malaysia, pp. 113-123. ISBN 9789674180935

Jamal, Parveen and Yahaya, Shahrul and Alam, Md. Zahangir and Azmi, Azlin Suhaida (2011) Optimisation of chromatography condition for biophenols separation from oil palm fruit fiber. In: Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur, pp. 51-59. ISBN 9789674181505

Jamal Ibrahim, Daoud (2011) The derivatives. In: Calculus with single variable. IIUM Press, Kuala Lumpur, pp. 67-91. ISBN 9789674181956

Jami, Mohammed Saedi and Muyibi, Suleyman Aremu and Embong, Nur Salihah (2011) Enhancing the dewaterability of sludge from wastewater treatment plant. In: Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur, pp. 194-199. ISBN 9789674181505

Jarot, Sigit Puspito Wigati (2011) Convolutional coded OFDM in broadband mobile communication. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 66-76. ISBN 9789674181697

Jarot, Sigit Puspito Wigati (2011) Securing OFDM-based systems from the physical layer. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 169-173. ISBN 9789674181697

Jarot, Sigit Puspito Wigati (2011) Zigzag codes: high rate low complexity iterative codes. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 53-65. ISBN 9789674181697

Jaswir, Irwandi (2011) Packaging food in Halal environment. Halal Pages 2011/2012. pp. 40-48. ISSN 1675-2465

Jaswir, Irwandi and Hazahari, Noor Yuslida and Mirghani, Mohamed Elwathig Saeed (2011) Extraction of fish collagen using enzymatic process. In: Current Research and Development in Biotechnology Engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 159-165. ISBN 978-967-418-151-2

Javid, Abdul Hakim and Kabbashi, Nassereldeen Ahmed (2011) Al-Biruni's experimental scientific methods in mechanics. In: Contributions of early Muslim scientists to engineering sciences and related studies. IIUM Press, Kuala Lumpur, pp. 65-69. ISBN 9789674181574

Johari, Norhasnidawani and Abd. Rahim, Safiyah Hazwani and Halim, Zahurin (2011) Mechanical behaviour of eco core composite sandwich structure. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 40-44. ISBN 9789674182311

Julaihi, Dzul I’zzat and Abdul Rahman, Ahmad F. and Khalifa, Othman Omran (2011) RFID for Hajj identification guide information and personnel announcement. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 121-131. ISBN 9789674181611

Jusoh @ Abd Rashid , Rusila Zamani and Shafie, Amir Akramin (2011) Contributions of Ibn-Sina in pharmaceutical sciences. In: Contributions of Muslim Scientists to Medicine andRrelated Sciences. IIUM Press, Kuala Lumpur, pp. 88-93. ISBN 978-967-418-155-0

Kabbashi, Nassereldeen Ahmed (2011) Honesty and integrity in the KOE, IIUM. IIUM Engineering Journal, 15 (2). pp. 165-171. ISSN 1511-788X

Kabbashi, Nassereldeen Ahmed (2011) Sewage sludge Composting Simulation as carbon / nitrogen concentration change. Journal of Environmental Sciences, 23 (11). 1925-1928 . ISSN 1001-0742 (In Press)

Kafafy, Raed Ismail and Che Mat, Sharzali (2011) Assessment of free-rotating air swirling device to reduce SI engine emissions and improve fuel economy. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 283-306. ISSN 1745-6444 (O), 1745-6436 (P)

Kaiser, Mohammad Rejaul and Anuar, Hazleen (2011) Polylactic acid bio-composite for food packaging. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 99-109. ISBN 9789674180218

Kamal, M. A. S. and Khan, Md. Raisuddin and -, Faisal and Billah, Md. Masum (2011) Autonomous goal finding robot. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 204-209. ISBN 9789674181529

Kamal, MAS and Khan, Md. Raisuddin and Bazuhair, S. and Billah, Md. Masum (2011) Develop an algorithm for goal finding robot using reinforcement learning. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 118-125. ISBN 9789674181529

Kamaruddin, Mohd Hider and Faris, Waleed Fekry (2011) The contribution of Ibn al-Awwam in botany and agriculture. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 41-44. ISBN 978-967-418-4

Kamaruddin, Shafie and Shuriye, Abdi Omar (2011) Al-Jazari contribution on the development of water supply systems. In: Contributions of Early Muslim scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 139-142. ISBN 978-967-418-157-4

Kamarudin, Mohd Hider and Mel, Maizirwan and Abdulkarim, Mohd Ismail (2011) Optimizing bioethanol production from sago starch in bioreactor for renewable energy. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 59-70. ISBN 9789674181635

Kamarudin, Mohd Hider and Shafie, Amir Akramin (2011) The contribution of Ibn al-Baitar in medicine. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 94-98. ISBN 978-967-418-155-0

Kamil, Khalid Khalil and Khalifa, Othman Omran (2011) Speech to text to sign language. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 297-311. ISBN 9789674181611

Karim, A.H.M Zehadul (2011) Agro-based food production system in Bangladesh: a socio-demographic impact assessment. The Social Sciences, 6 (6). pp. 473-479. ISSN 1818-5800

Karim, A.N. Mustafizul and Azon, Nurul Husna (2011) Value stream mapping: an important footstep for value analysis and value engineering. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 223-230. ISBN 9789674181598

Kashif, Syed Muhammad (2011) Application of Virtual Fields Method to Composite Plate Bending Problem. In: Advances in aircraft structure. IIUM Press, Kuala Lumpur, pp. 137-142. ISBN 978-967-418-148-2 (In Press)

Khadim, Ali and Chebil, Jalel and Islam, Md. Rafiqul (2011) Comparison between measured and predicted path loss for mobile communication in Malaysia. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 152-156. ISBN 9789674181383

Khadim, Ali and Chebil, Jalel and Islam, Md. Rafiqul (2011) Propagation path loss modeling for wireless applications. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 137-151. ISBN 9789674181383

Khalifa, Othman Omran (2011) Channel coding in CDMA2000. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 85-90. ISBN 9789674181697

Khalifa, Othman Omran (2011) Golay codec: an overview. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 23-34. ISBN 9789674181697

Khalifa, Othman Omran (2011) Reed-Muller codes: an overview. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 35-41. ISBN 9789674181697

Khalifa, Othman Omran and Awang, Mat Kamil and Hassan Abdalla Hashim, Aisha (2011) Human motion detection and classification. In: Human Behaviour Recognition, Identification and Computer Interaction. IIUM Press, Kuala Lumpur, pp. 154-162. ISBN 978-967-418-156-7

Khalifa, Othman Omran and Habib Harding, Sering and Hassan Abdalla Hashim, Aisha (2011) Lossless audio compression using Psychoacoustic Model and Wavelet transform. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 274-282. ISBN 9789670225685

Khalifa, Othman Omran and Hameed, Shihab A. (2011) Speech codec for a Voice over IP (VoIP) systems. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 323-327. ISBN 9789674181611

Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Khan, Sheroz (2011) Digital hearing aids analysis and implementation. In: Mechatronics book series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 224-232. ISBN 9789674181321

Khalifa, Othman Omran and Htike, Kyaw Kyaw and Hassan Abdalla Hashim, Aisha and Lai, Weng Kin (2011) Human posture recognition : an overview. In: Human BehaviourRrecognition,Iidentification and Computer Interaction. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 978-967-418-156-7

Khalifa, Othman Omran and Islam, Md. Rafiqul and Assidi, Abdulhakam.AM. and Hassan Abdalla Hashim, Aisha and Khan, Sheroz (2011) Vision based road lane detection system for vehicles guidance. Australian Journal of Basic and Applied Sciences, 5 (5). pp. 728-738. ISSN 1991-8178

Khalifa, Othman Omran and Issa, Sinzobakwira and Hassan Abdalla Hashim, Aisha (2011) H.264/advance video coding standard. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 16-21. ISBN 978-967-418-160-4

Khalifa, Othman Omran and Issa, Sinzobakwira and Siddiqi, Mohammad Umar (2011) Scalable and robust streaming video system challenges. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 12-21. ISBN 9789674181697

Khalifa, Othman Omran and Khan, Sheroz (2011) Review of image processing in industrial inspection and quality control. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 245-249. ISBN 9789670225685

Khalifa, Othman Omran and Kyaw, Kyaw Htike and Lai , Weng Kin and Albagoul, A. (2011) Human posture recognition preprocessing techniques. In: Mechatronics book series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 162-170. ISBN 9789674181321

Khalifa, Othman Omran and Obaid, M. Z. and Naji, Ahmed Wathik and Daoud, Jamal Ibrahim (2011) A rule-based Arabic text-to-speech system based on hybrid synthesis technique. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 342-354. ISSN 1991-8178

Khalifa, Othman Omran and Saeed, Rashid Abdelhaleem (2011) Channel coding techniques in mobile communication systems. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 77-84. ISBN 9789674181697

Khalifa, Othman Omran and Tabakovic, Emir and Memisevic, Zlatko and Hassan Abdalla Hashim, Aisha (2011) Performance analysis of image data compression using zero-tree wavelet transform. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 2-11. ISBN 9789674181697

Khan, Imran Moez and Htike@Muhammad Yusof, Zaw Zaw and Khalifa, Othman Omran and Lai, Weng Kin (2011) A review of path detection in intelligent video surveillance. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 258-263. ISBN 9789670225685

Khan, Imran Moez and Htike@Muhammad Yusof, Zaw Zaw and Khalifa, Othman Omran and Lai , Weng Kin (2011) Path detection implementation using fuzzy classifier. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 171-179. ISBN 9789674181321

Khan, Md. Ashikur Rahman and Rahman, Mohammad Mustafizur and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. World Academy of Science, Engineering and Technology, 74. pp. 198-202. ISSN 1307-6884

Khan, Md. Raisuddin (2011) Multiple hexapod robots and collaborative communication: a survey. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 86-93. ISBN 9789674181529

Khan, Md. Raisuddin and Hasbullah, Faried and Billah, Masum (2011) Control of unmanned underwater vehicle. In: Mechatronic book series: Control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 80-84. ISBN 9789674181765

Khan, Md. Raisuddin and Kamal, MAS and Billah, Masum (2011) Design and development of an automated café system. In: Mechatronics book series: System design and Signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 187-193. ISBN 9789674181321

Khan, Md. Raisuddin and M, Zuhdi and Billah, Masum (2011) Mechanical design of unmanned underwater vehicle. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 180-186. ISBN 9789674181321

Khan, Md. Raisuddin and Watanabe, M. and Billah, M. (2011) Snake robot locomotion in narrow space: a review. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 79-85. ISBN 9789674181529

Khan, Sheroz and Husin, Muhammad Fawzi and Mohd Nor, Mohd Halim (2011) Controlling electrical appliances using global mobile system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 439-443. ISBN 9789670225685

Khwancawin, Ruhanee and Jaswir, Irwandi and Saeed Mirghaini, Mohamed Elwathig (2011) Optimization of supercritical fluid carbon dioxide extraction of fish oil yield from tongue sole (cynoglossus lingue) applying response surface methodology. In: International Health Conference IIUM 2011 , 7 - 8 December 2011, Kuantan, Pahang.

Konneh, Mohamed and -, Abdul Halim (2011) Surface study when finish grinding silicon using resin bonded diamond cup wheel. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 257-263. ISBN 9789674181598

Konneh, Mohamed and Ghazali, Abdul Halim (2011) Engineering project management in automotive industry. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 247-253. ISBN 9789674181598

Konneh, Mohamed and Mukhtar, Muhammad (2011) Surface roughness studies in die-sink EDM of tungsten carbide using copper tungsten electrode. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 264-271. ISBN 9789674181598

Konneh, Mohamed and Shad, Nur Jannah and Saharudin, Noor Fazlin (2011) Study of the effect of different electrodes on material removal rate, electrode wear rate and surface roughness in the EDM of S-STAR. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 272-278. ISBN 9789674181598

Kyaw, Kyaw Htike and Khalifa, Othman Omran and Lai , Weng Kin (2011) Human posture recognition classification and recognition. In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 157-161. ISBN 9789674181321

Larbani, Sofiane and Othman, Raihan (2011) Mahmoud Hessaby's contribution to the infinitely extended particles theory in quantum physics. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 86-90. ISBN 978-967-418-157-4

Lenda, T.A. and Mridha, Shahjahan (2011) Influence of moisture absorption on impact strength and failure behavior of Hybrid Jute-Carbon/Epoxy composite. Advanced Materials Research, 264/65. pp. 457-462. ISSN 1022-6680

Liu, Baomin and Hawlader, Mohammad Nurul Alam (2011) Analyses of motion and drag coefficient of water droplets in a natural draught cooling tower. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 240-251. ISBN 9789674181581

Loh, S. K. and Faris, Waleed Fekry and Hamdi, M. and Chin, W. M. (2011) Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5). pp. 1154-1168. ISSN 1674-7321 E-ISSN 1869-1900

Lokeman, Norulhuda and Mohd Hassan, Norizan and Jarot, Sigit Puspito Wigati (2011) Smart grid communication layer. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 337-344. ISBN 9789674181611

M Sood, Anwar and Asrar, Waqar (2011) Designing a model for wind tunnel testing. In: Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur, 0-1.

M. Abd Al-Rahim, Sarra and Khalifa, Othman Omran (2011) Recognition of handwritten Arabic characters: challenges and prospective. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 250-257. ISBN 9789670225685

M.Khan, Imran and Khan, Aminullah and Khan, Sheroz and Khalifa, Othman Omran (2011) Wireless transfer of low-power to implanted biomedical devices: inductive link design. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 22-27. ISBN 9789674181710

M.Khan, Imran and Khan, Sheroz and Khalifa, Othman Omran (2011) Wireless transfer of low-power to implanted biomedical devices: introduction and 2-D coil parameters. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 8-13. ISBN 9789674181710

M.Khan, Imran and Khan, Sheroz and Khalifa, Othman Omran (2011) Wireless transfer of low-power to implanted biomedical devices: rectifier design. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 28-35. ISBN 9789674181710

M.Khan, Imran and Khan, Sheroz and Khalifa, Othman Omran (2011) Wireless transfer of power to low-power implanted biomedical devices: 3-dimensional coil design considerations. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 14-21. ISBN 9789674181710

Ma, Li Ya and Khan, Sheroz and Nordin, Anis Nurashikin (2011) CMOS operational amplifier design. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 60-67. ISBN 9789674181710

Ma, Li Ya and Khan, Sheroz and Nordin, Anis Nurashikin (2011) Converters results verifications. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 73-76. ISBN 9789674181710

Ma, Li Ya and Khan, Sheroz and Nordin, Anis Nurashikin (2011) Data conversion basic concepts. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 36-40. ISBN 9789674181710

Ma, Li Ya and Khan, Sheroz and Nordin, Anis Nurashikin (2011) Digital-to-analog converter. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 68-72. ISBN 9789674181710

Ma, Li Ya and Khan, Sheroz and Nordin, Anis Nurashikin (2011) Nyquist-rate analog-to-digital converter. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 41-46. ISBN 9789674181710

Ma, Li Ya and Khan, Sheroz and Nordin, Anis Nurashikin (2011) Oversampling analog-to-digital converter. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 47-52. ISBN 9789674181710

Ma, Li Ya and Khan, Sheroz and Nordin, Anis Nurashikin (2011) Switched-capacitor integrator design. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 53-59. ISBN 9789674181710

Mahfodh, Abdulrhman Mohammed and Ahmed, Abdi Nasir and Hassan Abdalla Hashim, Aisha and Mahmoud, Omer and Saeed, Rashid Abdelhaleem (2011) Simulation evaluation of HMMCT. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 157-164. ISBN 9789674181406

Mahfodh, Abdulrhman Mohammed and Ahmed, Abdi Nasir and Hassan Abdalla Hashim, Aisha and Islam, Md. Rafiqul and Saeed, Rashid Abdelhaleem (2011) IP multicast. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 139-143. ISBN 9789674181406

Mahfodh, Abdulrhman Mohammed and Ahmed, Abdi Nasir and Hassan Abdalla Hashim, Aisha and Mahmoud, Omer and Islam, Md. Rafiqul (2011) MIPV6 extensions. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 133-138. ISBN 9789674181406

Mahfodh, Abdulrhman Mohammed and Ahmed, Abdi Nasir and Hassan Abdalla Hashim, Aisha and Mahmoud, Omer and Saeed, Rashid Abdelhaleem (2011) Hierarchical mobile multicast context transfer (HMMCT). In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 152-156. ISBN 9789674181406

Mahfodh, Abdulrhman Mohammed and Ahmed, Abdi Nasir and Hassan Abdalla Hashim, Aisha and Saeed, Rashid Abdelhaleem and Mahmoud, Omer (2011) Mobility approaches to support IP multicast. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 144-151. ISBN 9789674181406

Mahmood, Iskandar Al-Thani and Khan, Md. Raisuddin (2011) Finite element formulation of piezoelectric laminated composite plate. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 247-256. ISBN 9789674181321

Mahmood, Mahmood Hameed and Adesta, Erry Yulian Triblas (2011) The project management challenges in technology innovation. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 231-237. ISBN 9789674181598

Mahmoud, Omer and Anwar, Farhat and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Saeed, Rashid Abdelhaleem (2011) Internet quality of service architectures. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 11-16. ISBN 9789674181420

Mahmoud, Omer and Khalifa, Othman Omran and Sellami, Ali and Hassan Abdalla Hashim, Aisha and Saeed, Rashid Abdelhaleem (2011) Mobility support in MPLS network. In: The 6th International Conference on Telecommunication Systems, Services, and Applications, 20-21 October 2011, Denpasar, Bali, Indonesia.

Mahmoud, Omer and Anwar, Farhat and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Saeed, Rashid A. (2011) Network Qos architecture. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 319-324. ISBN 9789674181499

Mahmoud, Omer and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran (2011) MPLS architectures. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 265-268. ISBN 9789674181420

Mahmoud, Omer and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran (2011) Mobility management and context transfer. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 247-250. ISBN 9789674181420

Mahmoud, Omer and Khalifa, Othman Omran and Ali, Sellami and Hassan Abdalla Hashim, Aisha (2011) Mobility support in diffserv and MPLS network. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 243-246. ISBN 9789674181420

Mahmoud, Omer and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Saeed, Rashid Abdelhaleem and Hameed, Shihab Ahmed (2011) Technology transfer in developing countries. In: 2nd International Conference on Engineering Professional Ethics and Education (ICEPEE ‘11), 17-19 May 2011, Kuala Lumpur.

Mahmoud Ahmed, Gharib Subhi and Othman, Raihan (2011) Limits and continuity. In: Calculus with single variable. IIUM Press, Kuala Lumpur, pp. 43-66. ISBN 9789674181956

Malek, H. and Khalifa, Othman Omran and Ibrahimy, Muhammad Ibn (2011) Reduction of motion artifact in portable pulse oximetry. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 267-273. ISBN 9789670225685

Malek, H. and Khalifa, Othman Omran and Mohd Ali, M.A. (2011) Reduction of motion artifact in portable pulse oximentry. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 267-273. ISBN 9789670225685

Malek, H. and Khalifa, Othman Omran and Mohd Ali, M.A. (2011) A study of independent component analysis applicability to fetal heart rate detection using photolethysmogarph. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 288-193. ISBN 9789670225685

Maleque, Md. Abdul (2011) Fabrication of metal matrix composite automotive brake rotor: part 1. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 80-85. ISBN 9789674182311

Maleque, Md. Abdul (2011) Fabrication of metal matrix composite automotive brake rotor: part 2. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 86-89. ISBN 9789674182311

Maleque, Md. Abdul and ., Mohd Nizam (2011) Conceptual design of folding bicycle frame with light weight materials. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 81-85. ISBN 9789674181642

Maleque, Md. Abdul and Karim, M., Rezaul (2011) Wear of aluminium matrix composite – effects of reinforcement combination. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 90-95. ISBN 9789674182311

Maleque, Md. Abdul and Rahman, Md. Mustafizur and Hossain, Sayeed (2011) Conceptual design of aluminium metal matrix composite brake rotor system. Advanced Materials Research, 264. pp. 1648-1653. ISSN 1022-6680

Maleque, Md. Abdul and Rahman, Md. Mustafizur and Hossain, Sayeed (2011) Reverse engineering of motorcycle chain. Advanced Materials Research, 264-26. pp. 1678-1683. ISSN 1022-6680

Manshhor, Mohd Romainor and Mirghani, Mohamed Elwathig Saeed (2011) The contribution of Banu Musa brothers in the self changing fountain. In: Contributions of early Muslim scientists to engineering sciences and related studies. IIUM Press, Kuala Lumpur, pp. 155-159. ISBN 978-967-418-157-4

Marita, Yusrini and Yaacob, Iskandar Idris (2011) Influence of grain size on magnetic properties of electroplated NiFe alloy. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 65-69. ISBN 9789674181642

Masud, M. H. and Anwar, Farhat and Mohamed, Omer Mahmoud and Bari, S.M. Sadakatul and Salami, A. F. (2011) A parallel duplicate address detection (PDAD) mechanism to reduce handoff latency of mobile internet protocol version 6 (MIPV6). In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.

Masud, Masharrof Hussain and Anwar, Farhat (2011) Analysis of handoff latency factors for MIPV6 network. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 108-115. ISBN 978-967-418-149-9

Masud, Mosharrof Hussain and Anwar, Farhat (2011) Deployment challenges of MIPV6. In: Research Issue in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 94-100. ISBN 978-967-418-149-9

Masud , Mosharrof Hussain and Siddiqi, Mohammad Umar (2011) Turbo codes: an error correction technique for 4G. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 99-107. ISBN 9789674181697

Mat Nawi, Siti Rabani and Toha, Nurul Farhah and Abdullah, Khaizuran and Islam, Md. Rafiqul and Khan, Sheroz (2011) Cognitive radio vs intelligent antenna. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 123-133. ISBN 9789674181710

Md Enzai, Nur Idawati and Husni, Hasnorhafiza and Anwar, Farhat and Mahmoud, Omer and Hassan Abdalla Hashim, Aisha (2011) Quality of Service (QoS) Ad-Hoc On-demand Distance Vector (AODV). In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 27-32. ISBN 9789674181420

Md Enzai, Nur Idawati and Husni, Hasnorhafiza and Anwar, Farhat and Mahmoud, Omer and Hassan Abdalla Hashim, Aisha (2011) QoS routing in ad-hoc wireless networks. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 33-39. ISBN 9789674181420

Md Idriss, Ahmed Nazrin and Mridha, Shahjahan (2011) Architecture of chopped fiber glass in plastic composite processed under different loads. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 114-118. ISBN 9789674182311

Md Idriss, Ahmed Nazrin and Mridha, Shahjahan (2011) Impact strength behaviour of the woven and chopped fiber glass composites at different temperatures. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 132-137. ISBN 9789674182311

Md Idriss, Ahmed Nazrin and Mridha, Shahjahan (2011) Variation of fiber architecture on loads applied in fabrication of epoxy/woven fiber glass composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 119-124. ISBN 9789674182311

Md Noor Albakri, Noorainani Ainina and Khalifa, Othman Omran (2011) Viterbi decoder: a review and implementation. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 42-52. ISBN 9789674181697

Md Nor, Khairul affendy and Shafie, Amir Akramin (2011) Fazlur Rahman Khan's understanding of tube structural system of skyscrapes. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 115-120. ISBN 978-967-418-157-4

Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Othman, Raihan and Salleh, Hanim (2011) Design, simulation and fabrication of piezoelectric micro generators for aero acoustic applications. Microsystems Technologies, 17 (4). pp. 563-573. ISSN 1432-1858 (O), 0946-7076 (P)

Md Yusof, Fauziah and Yaacob, Iskandar Idris (2011) Effects of sodium dodecyl benzene sulphonate (NaDBS) on Li Imide-PMMA based solid polymer electrolyte. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 144-148. ISBN 9789674181673

Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Hashim, Yumi Zuhanis Has-Yun and Ahmad Nor, Yusilawati (2011) The growth culture of BRIN-BD11 producing insulin in different type of microcarriers. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 97-109. ISBN 9789674180096

Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Jamal, Parveen and Mohd Salleh, Mohammad Ramlan and Abdullah, Rohane (2011) Determination of critical pO2 level and process online monitoring of lactic acid fermentation by Lactobacillus rhamnosus. In: Bioprocessing of lactic acid by fermentation technique. IIUM Press, International Islamic University Malaysia, pp. 63-72. ISBN 9789674180935

Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Jamal, Parveen and Mohd Salleh, Mohammad Ramlan and Zakaria, Ruzi Aini (2011) Efect of pO2 level on the Fermentation of Lactobacillus rhamnosus. In: Bioprocessing of lactic acid by fermentation technique. IIUM Press, International Islamic University Malaysia, pp. 37-50. ISBN 9789674180935

Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Jamal, Parveen and Mohd Salleh, Mohammad Ramlan and Zakaria, Ruzi Aini (2011) Effect of different process conditions on lactic acid production by Lactobacillus rhamnosus. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, International Islamic University Malaysia, pp. 73-82. ISBN 9789674180935

Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Jamal, Parveen and Mohd Salleh, Mohammad Ramlan and Zakaria, Ruzi Aini (2011) Process optimization of lactic acid fermentation in bioreactor. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, Kuala Lumpur, pp. 51-62. ISBN 9789674180935

Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Mohd. Salleh, Hamzah (2011) The kLa evaluation of recombinant Escherichia coli fermentation producing β-glucuronidase enzyme. In: Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 63-71. ISBN 9789674180102

Mel, Maizirwan and Abdul Karim, Mohamed Ismail and Yob, Nor Jannah and Samsury, Intan Zahra and Salleh, Hamzah Mohd. (2011) Optimization of crossflow nanofiltration for separation and concentration of β-glucuronidase enzyme. In: Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 93-100. ISBN 9789674180102

Mel, Maizirwan and Abdul Karim, Mohd Ismail and Mat sa'ud, Azini and Mohd. Salleh, Hamzah (2011) Control strategy of fed-batch fermentation of E.coli producing recombinant β-glucuronidase. In: Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 49-61. ISBN 9789674180102

Mel, Maizirwan and Abdulkarim, Mohd Ismail and Mohd Salleh, Mohammad Ramlan and Mohammad Amin, Noraini Alamin (2011) Optimization of media for lactobacillus rhamnosus fermentation for lactic acid production. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, Kuala Lumpur, pp. 25-36. ISBN 9789674180935

Mel, Maizirwan and Ahmad Nor, Yusilawati and Arifin, Mohd Azmir (2011) Microcarriers for cell culture technology. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 79-89. ISBN 9789674180713

Mel, Maizirwan and Arifin, Mohd Azmir (2011) Bioreactor for animals cells. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 59-67. ISBN 9789674180713

Mel, Maizirwan and Arifin, Mohd Azmir (2011) Culture medium. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 35-46. ISBN 9789674180713

Mel, Maizirwan and Arifin, Mohd Azmir (2011) Mode of cell culture. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 11-25. ISBN 9789674180713

Mel, Maizirwan and Arifin, Mohd Azmir (2011) Modes of bioreactor operations. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 69-77. ISBN 9789674180713

Mel, Maizirwan and Arifin, Mohd Azmir (2011) Virus culture : concept and procedures. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 91-104. ISBN 9789674180713

Mel, Maizirwan and Arifin, Mohd Azmir and Sohif, Hajar Naemah and Syed Hassan, Sharifah (2011) Optimization of process conditions for high cell density proliferation of DF-1 cells in bioreactor. In: Recent Development of Microcarrier For Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 141-148. ISBN 9789674180096

Mel, Maizirwan and Kamuri, Mohd Firdaus and Foo, Dominic Chwan Yee (2011) Debottleneck strategy and economic analysis of β-glucuronidase enzyme production. In: Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 125-143. ISBN 9789674180102

Mel, Maizirwan and Mohd. Salleh, Hamzah and Abdul Karim, Mohd Ismail and Jamil, Herry Hidayat (2011) Media optimization for fermentation of recombinant Escherichia Coli using response surface methodology. In: Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 1-19. ISBN 9789674180102

Mel, Maizirwan and Mohd. Salleh, Hamzah and Abdul Karim, Mohd Ismail and Mior Rashidi, Mior Haslem (2011) Improvement of recombinant E.coli fermentation producing β-glucuronidase enzyme by Taguchi's design. In: Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 21-36. ISBN 9789674180102

Mel, Maizirwan and Mohd. Salleh, Hamzah and Zainal Abidin, Norhafizah and Abdul Karim, Mohd Ismail and Ismail, Ahmad Fauzi (2011) Crossflow microfiltration of recombinant Escherichia coli producing β-glucuronidase enzyme. In: Bioprocessing of recombinant E.Coli producing β-glucuronidase enzyme. IIUM Press, Kuala Lumpur, pp. 73-82. ISBN 9789674180102

Mel, Maizirwan and Muhammad Nadzri, Husna and Kamaruddin, Mohd Hider and Abdulkarim, Mohd Ismail (2011) The effect of saccharification process of sago starch into sugar. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 71-77. ISBN 9789674181635

Mel, Maizirwan and Muhammad Nadzri, Husna and Kamarudin, Mohd Hider and Abdulkarim, Mohd Ismail (2011) Bioethanol production from sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 41-58. ISBN 9789674181635

Mel, Maizirwan and Shamsuddin, Mohd Rashid and Mohd Nur Lubis, Hamadah and Syed Hasan, Sharifah and Mohd Noor, Suriani (2011) Cell disruption improvement of E. Coli producing NP-AIV using high pressure homogenizer. In: Current research and development in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 79-83. ISBN 9789674181444

Mel, Maizirwan and Sopyan, Iis and Ahmad Nor, Yusilawati (2011) Cell attachment study of chicken fibroblast cell (DF-1) using Ceramic microcarrier granule in bioreactors. In: Recent Development oF Microcarier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 131-140. ISBN 9789674180096

Mel, Maizirwan and Sopyan, Iis and Fadli, Ahmad (2011) Biocompatibility of porous hydroxyapatite microcarrier for vero cell culture application. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 43-50. ISBN 9789674180096

Mirghani, Mohamed Elwathig Saeed (2011) Fats and oils: Halal perspective. Halal Pages 2011/2012. pp. 74-79. ISSN 1675-2465

Mirghani, Mohamed Elwathig Saeed and Adewale, Ahmed Idris and Suleyman, Aremu Muyibi and Daoud, Jamal Ibrahim and Abimbola, Mikail Maryam (2011) Nahar (mesua ferrea) tree as a medical plant. In: Current research and development in biotechnology engineering at IIUM. IIUM Press, IIUM, pp. 82-89. ISBN 9789674181512

Mirghani, Mohamed Elwathig Saeed and Ahmed, I. A. and Muyibi, Suleyman Aremu and Daoud, Jamal Ibrahim and Mikail, Maryam Abimbola (2011) Nahar (Mesua Ferrea) tree as a medicinal plant. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 82-89. ISBN 9789674181512

Mirghani, Mohamed Elwathig Saeed and Ahmed, I. A. and Muyibi, Suleyman Aremu and Daoud, Jamal Ibrahim and Mikail, Maryam Abimbola (2011) Potential of Nahar seed oil extract as antimicrobials. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 74-81. ISBN 9789674181512

Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Jamal, Parveen and Abdullah, H. A. (2011) Exploit of Malaysian mango kernel extract as antibacterial agent. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 90-100. ISBN 9789674181512

Mirghani, Mohamed Elwathig Saeed and Mikail, Maryam Abimbola and Ahmed, I. A. and Abdul Karim, Mohamed Ismail and Daoud, Jamal Ibrahim (2011) Date seed extract as preservatives. In: Current Research and Development in Biotechnology Engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 113-119. ISBN 978-967-418-151-2

Mohamad, Masturah and Othman, Raihan (2011) Contributions of Kerim Kerimov in aerospace engineering. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 110-114. ISBN 978-967-418-157-4

Mohamad, Souad A. (2011) Electrodeposition technique for ZnO semiconductor thin film fabrication. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 181-185. ISBN 9789674181642

Mohamad, Souad A. and Arof, Abdul Kariem (2011) A study on double junction zinc based/polymer thin film solar cell. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 170-175. ISBN 9789674181642

Mohamad, Souad A. and Arof, Abdul Kariem (2011) A voltammetric study of zinc telluride thin films prepared for photovoltaic applications. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 176-180. ISBN 9789674181642

Mohamad , Zahraru Hilall and Shuriye, Abdi Omar (2011) Al-Kindi on pharmacology. In: Contributions of early Muslim scientists to engineering sciences and related studies. IIUM Press, Kuala Lumpur, pp. 103-109. ISBN 9789674181574

Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah and Wan Yusoff, Wan Ahmad Yusmawiza (2011) A surgical training model manufacture using fused deposition modeling. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 44-49. ISBN 9789674181598

Mohamad Asharaf, Asfana Banu and Shuriye, Abdi Omar (2011) Abu a-Qasim al-Zahrawi's contribution to neurosurgery. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 115-119. ISBN 978-967-418-155-0

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) Casting investigation of heat treated biocompatible materials for total hip bone replacement. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 151-160. ISBN 9789674181598

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) Improvement of typical hip-joint design for gripping and fixing. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 26-43. ISBN 9789674181598

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) The effect of stucco system in ceramic shell investment casting. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 139-149. ISBN 9789674181598

Mohamad Nasir, Haidawati and Khalifa, Othman Omran and Hameed, Shihab A. (2011) Computing role in educating deaf children. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 37-41. ISBN 9789674181611

Mohamed, Elhadie and A.N., Mustafizul Karim and Amin, A. K. M. Nurul (2011) Cost Model for end-milling of AISI D2 tool steel. In: 2011 National Postgraduate Conference (NPC), 19-20 Sept. 2011, Kuala Lumpur.

Mohamed, Nazhirah and Shuriye, Abdi Omar (2011) Al-Majusi treatment of physical diseases using drug therapy and surgical manipulation. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 30-34. ISBN 978-967-418-155-0

Mohamed , Konneh and Zawawi, Mohd Shukur (2011) Precision grinding of silicon carbide using 76 µm grain diamond cup wheel. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 178-183. ISBN 9789674181628

Mohamed , Konneh and -, Mohamad Lutfi and -, Mohamad Shahrilnizam (2011) Investigation of surface integrity during precision grinding of silicon carbide using diamond grinding pins. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 190-195. ISBN 9789674181628

Mohamed , Konneh and -, Ahmad Fauzan (2011) Precision grinding of silicon carbide using 46 µm grain diamond cup wheel. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 172-177. ISBN 9789674181628

Mohamed , Konneh and -, Mohd Fadzil (2011) Precision grinding of silicon carbide using 107 µm Grain diamond cup wheel. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 184-189. ISBN 9789674181628

Mohamed , Konneh and Ahmad, Khairunnisa and Fazleen, Rose (2011) High speed milling of mould steel using 1.5mm-diameter end-mills. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 166-171. ISBN 9789674181628

Mohamed Ali Suliman, Suliman Mohamed and Mirghani, Mohamed Elwathig Saeed (2011) Abbas Ibn Firnas's contribution in aviation. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 135-138. ISBN 978-967-418-157-4

Mohamed Ariff, Tasnim Firdaus (2011) Microwave sintering of ceramic materials. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 185-191. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus (2011) Microwave sintering of metallic materials. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 179-184. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Ewing, Goey and Kam , Yee Wah (2011) Design of a simple and affordable electric bicycle. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 4-9. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Lau, Ken Tick (2011) Design of bicycle helmet using FEA. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 10-17. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Law, Siah Yong (2011) Mould design for handphone casing using moldflow. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 18-25. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Yap, Yee Seng (2011) Application of statistical quality control for quality improvement. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 66-71. ISBN 9789674181598

Mohamed Noor, Noraini and Faris, Waleed Fekry (2011) Al-Majusi: the pioner in obstetrics. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 7-11.

Mohamed Rafiq, Hashum and Siddiqi, Mohammad Umar (2011) Cryptographic boolean functions: transform domain perspective. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 120-140. ISBN 978-967-418-169-7

Mohamed Rehan, Muhammad Saifuddin and Rousseau, Jerome and Xiao-Jing, Gong and Guillaumat, Laurent and Mohamed Ali, Jaafar Syed (2011) Effects of fiber orientation of adjacent plies on the mode I crack propagation in a carbon-epoxy laminates. Procedia Social and Behavioral Sciences, 10. pp. 3179-3184. ISSN 1877-0428

Mohamed Saberi, Salfarina Ezrina and Hashim, Yumi Zuhanis Has-Yun and Packeer Mohamed, Vasila and Amid, Azura and Ahmad Raus, Raha and Mel, Maizirwan and Gibney, Michael J. and Brennan, Lorraine and Al-Rubeai, Mohamed (2011) Effects of different types of growth media on metabolite profiles (GCMS-based) of CHO-K1 cells expressing IGF-1 proteins. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, Kuala Lumpur.

Mohammad , Yeakub Ali and Elabtah , Ahmad Chaaban and Alrefaie, Musab Jamal (2011) Micro wire electrical discharge machining of tungsten carbide: analysis of surface roughness. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 124-129. ISBN 9789674181628

Mohammad , Yeakub Ali and Elabtah , Ahmad Chaaban and Alrefaie, Musab Jamal (2011) Micro wire electrical discharge machining of tungsten carbide: analysis of material removal rate. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 130-135. ISBN 9789674181628

Mohammad , Yeakub Ali and Elabtah , Ahmad Chaaban and Alrefaie, Musab Jamal (2011) Micro wire electrical discharge machining of tungsten carbide: methodology and procedure. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 119-123. ISBN 9789674181628

Mohammad , Yeakub Ali and -, Wan Emira Azaty and -, Nor Suriza (2011) Micro electro discharge machining of micropillar array: analysis of material removal rate. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 148-153. ISBN 9789674181628

Mohammad , Yeakub Ali and -, Asfana Banu and -, Adibah and -, Nur Atikah (2011) Investigation of minimum chip thickness in micro end milling of PMMA: process development. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 3-10. ISBN 9789674181659

Mohammad , Yeakub Ali and -, Mohd Saifuddin and Abdul Rahman, Nur Atiqah and Mohamad Asharaf, Asfana Banu (2011) Investigation of MRR for finish cut of titanium alloy using micro electro discharge milling. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 89-94. ISBN 9789674181628

Mohammad , Yeakub Ali and -, Mohd Saifuddin and Abdul Rahman, Nur Atiqah and Mohamad Asharaf, Asfana Banu (2011) Investigation of TWR for finish cut of titanium alloy using Micro Electro Discharge Milling. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 95-100. ISBN 9789674181628

Mohammad , Yeakub Ali and -, Muhamad Faizal and Mohamad Asharaf, Asfana Banu and Abdul Rahman, Nur Atiqah (2011) Finish cut of titanium alloy using micro electro discharge milling for nano surface finish. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 83-88. ISBN 9789674181628

Mohammad , Yeakub Ali and -, Muhammad Lutfi and -, Mohamad Ismail Fahmi (2011) Vibration issue in micro end milling. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 154-158. ISBN 9789674181628

Mohammad , Yeakub Ali and -, Wan Emira Azaty and -, Nor Suriza (2011) Micro electro discharge machining of micro pillar array: analysis of surface finish. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 142-147. ISBN 9789674181628

Mohammad , Yeakub Ali and Mansor, Noor Adila and Mass Duki, Siti Hamizah (2011) Effect of micro end milling tool diameter on minimum chip thickness. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 113-118. ISBN 9789674181628

Mohammad , Yeakub Ali and Mansor, Noor Adila and Mass Duki, Siti Hamizah (2011) Micro/meso milling of aluminium alloy 1100: analysis and modelling of minimum chip thickness. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 107-112. ISBN 9789674181628

Mohammad , Yeakub Ali and Mass Duki, Siti Hamizah and Mansor, Noor Adila (2011) Investigation of chip formation and minimum chip thickness in micro/meso milling: Methodology and design of experiment. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 101-106. ISBN 9789674181628

Mohammad , Yeakub Ali and Mohamad Ashraf, Asfana Banu and Abdul Wahab, Adibah and Abdul Rahman, Nur Atiqah (2011) Investigation of minimum chip thickness in micro end milling of PMMA: Experiment and analysis 800 µm diameter tool. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 11-17. ISBN 9789674181659

Mohammad , Yeakub Ali and Mohamad Ashraf, Asfana Banu and Abdul Wahab, Adibah and Abdul Rahman, Nur Atiqah (2011) Investigation of minimum chip thickness in micro end milling of PMMA: experiment and analysis 1.0 mm diameter tool. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 18-25. ISBN 9789674181659

Mohammed, Kaleemullah and Faris, Waleed Fekry and Faried, Hasbullah (2011) Design of robust Hoo, fuzzy and LQR controller for active suspension of a quarter car model. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11, 17-19 May 2011, Kuala Lumpur, Malaysia.

Mohammed, Mokhaled Mustafa and Khan, Sheroz and Chebil, Jalel and Al-Khateeb, Khalid A. Saeed (2011) UWB communications for biomedical implants. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 141-144. ISBN 9789674181710

Mohammed, Mokhaled Mustafa and Khan, Sheroz and Chebil, Jalel and Al-Khateeb, Khalid A. Saeed and Khan, Imran Moez (2011) UWB pulse generation and modulation circuits for biomedical implants. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 134-140. ISBN 9789674181710

Mohammed, Mokhaled Mustafa and Khan, Sheroz and Chebil, Jalel and Al-Khateeb, Khalid A. Saeed and Khan, Imran Moez (2011) UWB pulse generation for biomedical implants. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 145-148. ISBN 9789674181710

Mohammed, Mokhaled Mustafa and Khan, Sheroz and Chebil, Jalel and Al-Khateeb, Khalid A. Saeed and Khan, Imran Moez (2011) Ultra-wide band technology. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 149-152. ISBN 9789674181710

Mohammed Jama, Abdirisaq and Khalifa, Othman Omran (2011) Real-time MPEG-4 transmission over wireless LAN. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 263-272. ISBN 978-967-418-160-4

Mohd Ali, Afifah and Adesta, Erry Yulian Triblas (2011) Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 81-92. ISBN 9789674180232

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha (2011) Evaluation handover latency in M-HMIPV6 with context transfer. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 123-127. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha (2011) Inter domain movement of M-HMIPV6/CXTP. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 64-69. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha (2011) Intra domain movement of M-HMIPV6/CXTP. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 58-63. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha (2011) Packet loss in M-HMIPV6 with context transfer. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 118-122. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha (2011) Signaling flow of M-HMIPV6/CXTP. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 76-82. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha (2011) Simulation study of HMIPV6 and M-HMIPV6/CXTP. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 112-117. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Ali, Sellami and Al-Khateeb, Wajdi Fawzi Mohammed (2011) Research direction in mobile IPV6. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 9-14. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Alshaikhli, Imad Fakhri Taha (2011) MIPV6 based approaches for mobility management. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 32-35. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Alshaikhli, Imad Fakhri Taha and Anwar, Farhat (2011) Qualitative study of mobility management approaches. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 48-52. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Daoud, Jamal Ibrahim and Khalifa, Othman Omran and Hameed, Shihab A. (2011) Mathematical evaluation of a context transfer-based approach to improve handover in mobile multicast environment. Australian Journal of Basic and Applied Sciences, 5 (2). pp. 165-172. ISSN 1991-8178

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Zeki, Akram M. (2011) The study of multicast hierarchical mobile IPV6. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 21-26. ISBN 9789674181406

Mohd Aman, Azana Hafizah and Mahmoud, Omer and Hassan Abdalla Hashim, Aisha (2011) Future directions. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 128-132. ISBN 9789674181406

Mohd Aziz, Mohd Hafizuddin and Mirghani, Mohamed Elwathig Saeed (2011) Contributions of al-Razi on alchemy in terms of metal and substance. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 24-29. ISBN 978-967-418-157-4

Mohd Dom, Azratul Ashimah Nur and Kabbashi, Nassereldeen Ahmed (2011) Ibn al-Nafis contribution in urology progress practices. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 67-71. ISBN 978-967-418-155-0

Mohd Ibrahim, Azhar and Shuriye, Abdi Omar (2011) Al-Biruni's views on the discovery of the spherical earth. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 49-52. ISBN 978-967-418-157-4

Mohd Kamal, Irnada Syuhaidah and Mohd Nor Rashid, Noraswati and Mel, Maizirwan (2011) A Cryopreservatlon method of Sclzaphyllurn commune local strains. In: International Congress of the Malaysian Society for Microbiology 2011, 8-11 December 2011, Penang.

Mohd Nasir, Nur Aimi and Mirghani, Mohamed Elwathig Saeed (2011) The glorious contribution of Ibn al-Quff on cardiology and embryology as well as other surgical matters. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 104-108. ISBN 978-967-418-155-0

Mohd Nasir, Nur Aimi and Mohamed, Nurhafizah Seeni and Mel, Maizirwan (2011) Lactic acid, its processing and utilization in industry: a review. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, Kuala Lumpur, pp. 1-16. ISBN 9789674180935

Mohd Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Anuar, Hazleen (2011) Potential of kenaf in economic perspectives. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 21-27. ISBN 9789674180218

Mohd Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Mohamed, Nurhafizah Seeni and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Growth kinetic study of Rhizopus oryzae via fermentation of lactic acid from kenaf biomass. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, Kuala Lumpur, pp. 101-111. ISBN 9789674180935

Mohd. Amin, Zakaria and Hawlader, Mohammad Nurul Alam and Karim, Azharul (2011) A solar assisted heat pump system for desalination. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 252-261. ISBN 9789674181581

Mohd. Isa, Farah Nadia and Paul V., Brennan (2011) Design of a high gain & ultra wideband microstrip array antenna for avalanche radar. In: 2011 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2011, 3-8 July 2011, Spokane, WA.

Mohd. Salleh, Hamzah and Ramli, Noriah (2011) Do we need Halal certification, research & training? there are many advantages for halal certification and the use of halal logo for the consumers, the manufacturers and the regulators. Halal Pages 2011/2012. pp. 102-107. ISSN 1675-2465

Mohd. Salleh, Hamzah and Samsudin, Nurhusna (2011) Site directed mutagenesis to improve phyfauia1 phytase activity for animal feed. In: International Conference on Biotechnology Engineering, ICBioE’11, 17-19 May, 2011 , Kuala Lumpur.

Mohiuddin, A. K. M. (2011) Solar energy management for poverty alleviation and income generating activities. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 91-96. ISBN 9789674181581

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Alternative mixing strategy for biodiesel production: mixed flow impeller characterization. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 188-196. ISBN 9789674181581

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Flow characteristic of mixing impeller for liquid-liquid mixing. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 85-90. ISBN 9789674181581

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Preliminary investigation of biodiesel reactor optimization using combine CFD-Taguchi method. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 179-187. ISBN 9789674181581

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Waste cooking oil utilization for biodiesel production. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 79-84. ISBN 9789674181581

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. and Husaini, Muhamad (2011) Turbulence model for axial mixing impeller in unbaffled vessel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 97-102. ISBN 9789674181581

Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of combustion characteristics using Jatropha oil methyl esters biodiesel and diesel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 262-268. ISBN 9789674181581

Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of performance characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 69-73. ISBN 9789674181581

Moniruzzaman, Md. and Islam, Md. Rafiqul and Kamaruzzaman , Sopian and Saleem , H. Zaidi (2011) Cubic spline based particle swarm optimization for microstrip antennas. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 804-807. ISSN 1991-8178

Mosa, Ahmed A. and Hassan Abdalla Hashim, Aisha and Saeed, Rashid Abdelhaleem and Khalifa, Othman Omran (2011) Evaluation of NEMO-based approaches for route optimization. In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.

Mridha, Shahjahan (2011) Alloy coating on steel surfaces by melt synthesis of elemental metal powders. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 53-58. ISBN 9789674181642

Mridha, Shahjahan (2011) Composite coating on titanium alloy using high power laser. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 45-49. ISBN 9789674181673

Mridha, Shahjahan (2011) Impact behaviour of carbon/epoxy composites in moisture and temperature environments. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 125-131. ISBN 9789674182311

Mridha, Shahjahan (2011) Laser nitriding of titanium. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 39-44. ISBN 9789674181673

Mridha, Shahjahan (2011) Quality of copper film electroplated on silicon wafer using different current densities. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 28-38. ISBN 9789674181673

Mridha, Shahjahan (2011) Wear of nitride coating produced by Ti-Al Melt synthesis in nitrogen environment. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 96-102. ISBN 9789674181673

Mridha, Shahjahan and Amuda, Muhammed Olawale Hakeem (2011) Grain refining in AISI 430 ferritic stainless steel welds by addition of metal powder. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 41-47. ISBN 9789674181642

Mridha, Shahjahan and Dyuti, S. (2011) Effects of processing parameters on microstructures and properties of TIG melted surface layer of steel. Advanced Materials Research, 264/65. pp. 1421-1426. ISSN 1662-8985

Mridha, Shahjahan and Dyuti, S. (2011) Formation of TiN dispersed composite layer on steel surfaces by Titanium Powder Preplacement and TIG Surface Melting Processes. Advanced Materials Research, 264-26. pp. 1415-1420. ISSN 1662-8985

Mridha, Shahjahan and Dyuti, S. and Shaha, S.K. (2011) Wear behavior of modified surface layer produced by TIG melting of preplaced Ti powder in nitrogen environment. Advanced Materials Research, 264-26. pp. 1427-1432. ISSN 1662-8985

Mridha, Shahjahan and Haruman, E. and Sudin, M. Bin and Triwiyanto, A. and Hussain, P. (2011) Structural and properties development of expanded austenite layers on AISI 316L after low temperature thermochemical treatments. Journal of Applied Sciences, 11 (9). pp. 1536-1543. ISSN 18125654

Mridha, Shahjahan and Lenda, T.A. (2011) Impact strength of Carbon Reinforced Epoxy Composite at different temperatures. Advanced Materials Research, 264-26. pp. 451-456. ISSN 1662-8985

Mridha, Shahjahan and Nafis, Sarwar Islam (2011) Properties of wood fiber reinforced polypropylene composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 101-107. ISBN 9789674182311

Mridha, Shahjahan and Shiau, Khee Tang (2011) Measurement of moisture absorption in Borophosphosilicate Glass (BPGS) films. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 50-57. ISBN 9789674181673

Mubarak, N. M. and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid (2011) The production of carbon nanotubes using two-stage chemical vapor deposition and their potential use in protein purification. Chemical Engineering Journal, 168. pp. 461-169. ISSN 1385-8947

Mudathir, Muhammad A. F. and Hassan Abdalla Hashim, Aisha and Syed, Sulaiman (2011) Integrated services. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 17-20. ISBN 9789674181420

Muhammad , Mahbubur Rashid and Abubakar , S. and Tamjis, R. (2011) Modeling of disc rotor induction motor. In: Mechatronics book series: System design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 38-51. ISBN 9789674181321

Muhida, Riza and Martono, Wahyudi and Albagul, Abdulgani and Sutjipto, Agus Geter Edy and ., Afzeri and Haruman, Esa and Sopyan, Iis (2011) A maximum power point tracking for Photovoltaic system using temperature compensator method. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 187-193. ISBN 9789670225685

Muhida, Riza and Mohd Zaid, Suhaimi and Martono, Wahyudi and Muhida, Rifki and Legowo, Ari and Priantoro, Akhmad Unggul (2011) Development of mobile Photovoltaic robot for exploring disaster area. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 338-345. ISBN 9789670225685

Mushtaq, Umer and Adesta, Erry Yulian Triblas (2011) Effect of welding process on formability of tailor welded blanks. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 294-306. ISBN 9789674181598

Musse, Mohamud Ahmed and Khan, Sheroz (2011) Development of automation system for small/medium scale biomass based renewable power plants. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 108-116. ISBN 9789674181703

Musse, Mohamud Ahmed and Muhammad Hanapi, Noor Zatil Amali and Fathil, Che Fazilah (2011) Electric motor. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 176-179. ISBN 9789674181703

Musse, Mohamud Ahmed and Muhammad Hanapi, Noor Zatil Amali and Fathil, Che Fazilah (2011) Electric motor efficiency. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 185-190. ISBN 9789674181703

Musse, Mohamud Ahmed and Muhammad Hanapi, Noor Zatil Amali and Fathil, Che Fazilah (2011) Energy calculations. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 195-202. ISBN 9789674181703

Musse, Mohamud Ahmed and Muhammad Hanapi, Noor Zatil Amali and Fathil, Che Fazilah (2011) Energy efficiency implementation of permanent magnet synchronous motor. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 191-194. ISBN 9789674181703

Musse, Mohamud Ahmed and Muhammad Hanapi, Noor Zatil Amali and Fathil, Che Fazilah (2011) Modeling, result and analysis. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 203-209. ISBN 9789674181703

Musse, Mohamud Ahmed and Rahmatullah, Rafizah and Abdul Rashid, Syarifah Nur Zati (2011) Application of fan motor enegy efficiency. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 220-222. ISBN 9789674181703

Musse, Mohamud Ahmed and Rahmatullah, Rafizah and Abdul Rashid, Syarifah Nur Zati (2011) Energy usage in Malaysia. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 214-216. ISBN 9789674181703

Musse, Mohamud Ahmed and Rahmatullah, Rafizah and Abdul Rashid, Syarifah Nur Zati (2011) Fan Efficiency Grade (FEG) development stages. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 223-226. ISBN 9789674181703

Musse, Mohamud Ahmed and Sharif, Md. Raihan and Ullah, M. Habib (2011) FPGA-based hardware modeling of light rail transit fare card controller. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 155-165. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Electrical distribution equipment faults. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 6-14. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Faults from traditional to automation techniques. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 15-21. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Intelligent automation system: automation hardware development. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 60-68. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Relays. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 43-48. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) SCADA software development–indusoft case study. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 25-36. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) SCADA system for electrical distribution system. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 22-24. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Development of modbus TCP/IP setting. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 87-95. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Electrical distribution system. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 2-5. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Power line carrier communication system. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 96-102. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Remote Terminal Unit (RTU). In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 49-59. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Schematic diagrams of automated substation panels. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 69-77. ISBN 9789674181703

Musse, Mohamud Ahmed and Soo, Wai Lian (2011) Software automation development. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 78-86. ISBN 9789674181703

Musse, Mohamud Ahmed and Ullah, M. Habib and Gunawan, Teddy Surya and Sharif, Md. Raihan and Muhida, Riza (2011) Modeling of an environment friendly Hybrid Electric Vehicle (HEV). In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 138-143. ISBN 9789674181703

Musse, Mohamud Ahmed and rahmatullah, Rafizah and Abdul Rashid, Syarifah Nur Zati (2011) FEG and FMEG practical considerations – fan selections guide. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 227-231. ISBN 9789674181703

Musse, Mohamud Ahmed and rahmatullah, Rafizah and Abdul Rashid, Syarifah Nur Zati (2011) Results and discussions. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 232-236. ISBN 9789674181703

Mustafa, Ahmed and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran (2011) Using spline path in real time navigation simulations systems, in continuous space. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 112-118. ISBN 9789670225685

Muyibi, Suleyman Aremu and Abdulkarim, Mohd Ismail and Alam, Md. Zahangir and Ameen, Emad S.M. and Kabbashi, Nassereldeen Ahmed (2011) Local sourcing for renewable and sustainable replacement for water and wastewater treatment chemicals: activated carbon from agro-wastes. In: Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur, pp. 77-84. ISBN 9789674181505

Muyibi, Suleyman Aremu and Jamal, Parveen and Wan Sulaiman, Wan Mohd Syraif (2011) Bioprocessing of Moringa Oleifera for removal of heavy metals (Cadmium and Chromium). In: Current research and developments in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 117-122. ISBN 9789674181369

Muyibi, Suleyman Aremu and Jami, Mohammed Saedi (2011) The optimally mobile Muslim experts in the service of the Ummah. IIUM Engineering Journal, 12 (5). pp. 173-178. ISSN 1511-788X

Muyibi, Suleyman Aremu and Mohd. Salleh, Hamzah (2011) Ethical issues in environmental management and resource conservation from Islamic perspective. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 16-26. ISBN 9789670225821

Muyibi, Suleyman Aremu and Mortan, Siti Hatijah and Abdul Karim, Mohamed Ismail (2011) Water quality characterization studies on spring water for use in ponds for kelah fish breeding in Kelah Sanctuary. In: Current research and development in biotechnology engineering at IIUM (volume 1). IIUM Press, Kuala Lumpur, pp. 13-18. ISBN 9789674181505

Muyibi, Suleyman Aremu and Olanweraju, Rashidah Funke (2011) Water quality issues in food processing and production: good quality water is very essential in the production of safe food. Halal Pages 2011/2012. pp. 66-73. ISSN 1675-2465

Naji, Ahmed Wathik and ., Fatema-Tuz-Zohra (2011) Design and development of RFID security model. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 112-124. ISBN 9789670225814

Naji, Ahmed Wathik and Mohd. Akahsah, Siti Ruqayah (2011) Design and implementation of voice security system in MATLAB and JAVA. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 91-111. ISBN 9789670225814

Nazrin, A. and Mridha, Shahjahan and A. Rahman, Mohamad (2011) Effect of processing force on architecture and impact strength of glass fiber reinforced epoxy composites. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 583-590. ISBN 9789670225685

Noorbatcha, Ibrahim Ali and Abdul Hadi, Muaz and Adam, Zarul Azwan and Mohd. Salleh, Hamzah (2011) Molecular interaction analysis to design new drug candidates for Lysosomal storage disease. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 215-221. ISBN 9789674181512

Noorbatcha, Ibrahim Ali and Abdul Hadi, Muaz and Ismail, Ahmad Faris and Mohd. Salleh, Hamzah (2011) Improving enzyme catalysis through the improvement of binding strength: simulated mutation to predict the mutational effect on Xylanase Cex. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 207-214. ISBN 9789674181512

Noorbatcha, Ibrahim Ali and Abdullah, Nor Hayati and Awang, Khalijah (2011) Structure activity relations in Pentacyclic Triterpenoids towards hyaluronidase inhibitory activity. In: Current Research and Development in Biotechnology Engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 348-355. ISBN 9789674181512

Noorbatcha, Ibrahim Ali and Arifin, Borhanuddin and M Zain, Sharifudin (2011) Potential energy surfaces for reactions among hydrogen fluoride molecules. In: Current research and development in biotechnology engineering at IIUM (Volume II). IIUM Press, Kuala Lumpur, pp. 251-261. ISBN 9789674181512

Noorbatcha, Ibrahim Ali and Hamzah, Farahana and Mohd. Salleh, Hamzah and Syed Osman Idid, Syed Zahir Idid (2011) In silico prediction of anticancer activity of Nitrosoureas. In: Current Research and Development in Biotechnology Engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 356-362. ISBN 9789674181512

Noorbatcha, Ibrahim Ali and Hussin, Nor Afina Eidura and Mohd. Salleh, Hamzah (2011) Molecular modeling of the biodegradation polyesters using lipase. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 68-73. ISBN 9789674181512

Noorbatcha, Ibrahim Ali and Shamsudin, Ahmad Faizul (2011) Bio-molecular computing in degenerative brain research. In: Current Research and Development in Biotechnology Engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 363-369. ISBN 9789674181512

Nordin, Anis Nurashikin and Ibrahimy, Muhammad Ibn and Mel, Maizirwan and Voiculescu, Ioana (2011) Novel MEMS biosensor with integrated impedance and mass-sensing capabilities. US 7,964,144 B1.

Nordin, Anis Nurashikin and Talib, Fatin Alea (2011) Comparative analysis of low power VLSI circuit techniques. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 219-234. ISBN 9789670225814

Nordin, Anis Nurashikin and Zaghloul, Mona E. (2011) RF oscillator implementation using integrated CMOS surface acoustic wave resonators. Analog Integrated Circuits and Signal Processing, 68 (1). pp. 33-42. ISSN 0925-1030 (Print) 1573-1979 (Online)

Nordin, Nor Hidayati Diyana and Othman, Raihan (2011) Studies in gynaecology in zad al-musafir wa qut al- hadir of Abu Jaafar Ibn al-Jazzar. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 81-87. ISBN 978-967-418-155-0

Nordin, Norhuda Hidayah and Ahmad, Zuraida and Omar, Nurizan and Alias, Tuti Yasmin (2011) Comparative study between standard and commercial sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 17-26. ISBN 9789674181635

Norhanis, Aida and Islam, Md. Rafiqul and Wajdi, Al Khateeb (2011) Feasibility analysis of free space earth to satellite optical link in tropical region. IIUM Engineering Journal, 12 (5). pp. 61-68. ISSN 1511-788X

Noviendri, Dedi and Jaswir, Irwandi and Mohd. Salleh, Hamzah and Taher, Muhammad and Miyashita, Kazuo (2011) Isolation of fuxoxanthin and fatty analysis from Padina australis and cytotoxicity effect of fucoxanthin of human lung cancer (H1299) cell lines. In: Proceedings of the 2nd International Conference on Biotechnology Engineering ICBioE'11, 17-19 May 2011, Kuala Lumpur.

Nurul Amin, A.K.M and Kamaruddin, K. and Abdelgadir, M. (2011) Workpiece preheating approach to reduce chatter and improve machinability of titanium alloy- Ti6A14V. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 576-582. ISBN 9789670225685

Nurul Amin, A.K.M and Rizal, M.A. and Razman, M. (2011) Investigation of chatter arising during end milling operation on VMC and quality of machined surface. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, International Islamic University Malaysia, pp. 542-555. ISBN 9789670225685

O. H., Assma and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2011) Handwritten Arabic word/character recognition : common approaches. In: Human Behaviour Recognition, Identification and Computer Interaction. IIUM Press, Kuala Lumpur, pp. 289-297. ISBN 978-967-418-156-7

Okhunov, Abdurahim and Abu Kassim, Hasan and Usmanov, Phazlitdin (2011) Determination of moment of inertia for 162-168Hf and 164-176Yb deformed nuclei. Sains Malaysiana, 40 (1). pp. 1-3. ISSN 0126-6039

Olanrewaju, R. F. and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Aburas, Abdurazzag Ali and Zeki, Akram M. (2011) Distortion-free embedding in the optic disk of retina fundus images using complex-valued neural network. World Applied Sciences Journal , 13 (6). pp. 1295-1301. ISSN 1818-4952

Olanrewaju, R. F. and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Zeki, Akram M. (2011) Detection of alterations in watermarked medical images using Fast Fourier Transform and Complex-Valued Neural Network. In: 4th International Conference on Mechatronics (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Omar, Afiqah and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Oil Palm Empty Fruit Bunch (OPEFB) for lightweight composites concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 9789674182311

Omar, Ashraf Ali E. and Kurban, Adel (2011) Design, fabrication and experimental testing of IIUM free wing unmanned aerial vehicle (IIUM-FWUAV). Australian Journal of Basic and Applied Sciences, 5 (6). pp. 381-389. ISSN 1991-8178

Omar, Mohd Afian and Subuki, Istikamah and Abdullah, Nor Syakira and Alias, Tuti Yasmin (2011) Feedstock preparation of injection moulded stainless steel using biodegradable starch binder. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 79-86. ISBN 9789674181635

Omar, Nurihan and Kabbashi, Nasreldin A. (2011) The contribution of Saghir Akhtar in pharmaceutical science. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 99-103. ISBN 978-967-418-155-0

Omar, Nurizan and ., Nur Humairah and Mohd Hatta, Maziati Akmal and Ahmad, Zuraida (2011) Sago, its properties and applications: a review. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 1-15. ISBN 9789674181635

Omar, Nurizan and Ahmad, Zuraida (2011) SEM analysis of coir fiber and coir fiber-albumen-concrete before and after surface treatments. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 220-229. ISBN 9789674181659

Omar, Nurizan and Ishak , Norazah and Ahmad, Zuraida (2011) Sago starch: nanoclay biocomposites film. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 87-99. ISBN 9789674181635

Omar, Nurizan and Kabbashi, Nassereldeen Ahmed (2011) Ali bin Isa al-Kahhal : pioneer in ophthalmology. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 25-29. ISBN 978-967-418-155-0

Omar, Nurizan and Nordin, Norhuda Hidayah and Halim, Zahurin (2011) Preliminary study on superabsorbent polymer hydrogel from sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 115-128. ISBN 9789674181635

Omar, Zakaria and Hassan Abdalla Hashim, Aisha and Azram, Mohammad and Khalifa, Othman Omran and Saeed, Rashid Abdelhaleem (2011) Challenges in multi-radio multi-channel wireless mesh network. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 237-241. ISBN 9789674181420

Omar, Zakaria and Hassan Abdalla Hashim, Aisha and Saeed, Rashid Abdelhaleem and Azram, Mohammad and Khalifa, Othman Omran (2011) A study Of channel assignment approach to reduce frequent reassignment. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 227-230. ISBN 9789674181420

Ooi, Chong Jin and Mridha, Shahjahan (2011) Mechanical properties of wood plastic composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 96-100. ISBN 9789674182311

Packeer Mohamed, Vasila and Shuriye, Abdi Omar (2011) Ibn Zuhr on diseases and treatments. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 54-58. ISBN 978-967-418-155-0

Patwari, Muhammed Anayet Ullah and A.K.M., Nurul Amin and Faris, Waleed Fekry (2011) Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V. Advanced Materials Research, 264/65. pp. 1160-1165. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2011) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 591-596. ISBN 9789670225685

Purtojo, Purtojo and Akmeliawati, Rini and Martono, Wahyudi (2011) Fuzzy-based NCTF controller for PTP positioning: fuzzy membership and rule based modifications. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 223-230. ISBN 9789670225685

Purwanto, Hadi and ., Muta'alim and Dahlan, Yuhelda and Saleh, Nuryadi and ., Pramusanto (2011) Upgrading of iron-rich laterite ore using reverse flotation. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 27-33. ISBN 9789674181642

Purwanto, Hadi and ., Pramusanto (2011) Upgrading of laterite ore by reduction and learning. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674181642

Purwanto, Hadi and Jusoh @ Abd , Rusila Zamani (2011) Development of thermoselect process in waste management system in Malaysia. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 119-124. ISBN 9789674181659

Purwanto, Hadi and Mohd Selamat, Nor Fazilah (2011) Preparation of rice husk for raw material of silicon. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 203-206. ISBN 9789674181673

Qabajeh, Mohammad and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Hameed, Shihab A. and Qabajeh, Liana K. (2011) QOS multicast routing in MANETs. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 90-93. ISBN 978-967-418-149-9

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran (2011) Multicast security : issues and solutions. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 257-262. ISBN 978-967-418-160-4

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana (2011) Qualitive study on multicast routing protocols in manets. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 228-234. ISBN 978-967-418-160-4

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana K. (2011) A tree-based QoS multicast routing protocol for MANETs. In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana K. (2011) Issues in location-based multicast routing in manets. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 235-240. ISBN 978-967-418-160-4

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana (2011) Classifications of multicast routing In mobile ad hoc networks. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 221-227. ISBN 978-967-418-160-4

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana and Elfaki, Faiz Ahmed Mohamed (2011) Simulation in wireless networks: an overview. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 196-200. ISBN 9789674181406

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana K. (2011) Position-based routing protocols for ad-hoc networks. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 191-195. ISBN 9789674181406

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana K. (2011) Supporting QoS multicast routing over mobile ad hoc networks. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 186-190. ISBN 9789674181406

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana K. and Daoud, Jamal Ibrahim (2011) Quality of Service (QOS) issues in manets. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 181-185. ISBN 978-967-418-1406

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana K. and Mahmoud Ahmed, Gharib Subhi (2011) Routing protocols for ad hoc wireless networks. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 176-180. ISBN 9789674181406

Qabajeh, Mohammad M. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Qabajeh, Liana K. and Zeki, Akram M. (2011) Introduction to QoS approaches in mobile ad hoc networks. In: Advances in mobility management for IP networks. IIUM Press, Kuala Lumpur, pp. 171-175. ISBN 9789674181406

Qadir, Sana and Siddiqi, Mohammad Umar (2011) Cryptographically Generated Addresses (CGAs): A survey and an analysis of performance for use in mobile environment. International Journal of Computer Science and Network Security (IJCSNS), 11 (2). pp. 24-31. ISSN 1738-7906

Raafat, Safanah M. and Akmeliawati, Rini (2011) Intelligent robust control for precise tracking performance of X-Y positioning system. In: Computational intelligence in robust control: theory and application. IIUM Press, Kuala Lumpur, pp. 147-189. ISBN 9789674181963

Radzi, Amar Hazwani and Darwis Harahap, Wisatawati and Khan, Sheroz and Musse, Mohamud Ahmed (2011) Modelling of low voltage power line for data communication: simulation results. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 118-124. ISBN 9789674181703

Radzi, Amar Hazwani and Darwis Harahap, Wisatawati and Khan, Sheroz and Musse, Mohamud Ahmed and Abdullah, Khaizuran (2011) Low voltage powerline analysis and simulation results. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 125-132. ISBN 9789674181703

Rahman, Md. Mozasser and Abd Ralim, Mohd Ruzaini (2011) Design and development of digger robot. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 154-169. ISBN 9789674181529

Rahman, Md. Mozasser and Abdul Rahim, Siti Fatimah (2011) Design and development of a sorting machine using multiple sensory system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 52-57. ISBN 9789674181734

Rahman, Md. Mozasser and Md Salleh, Mohd Zoolfadli (2011) Design and development of two fingers robotic hand actuated by active grasping data. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 126-143. ISBN 9789674181529

Rahman, Md. Mozasser and Mohammed Mahil, Ahmed Murgab and Umar, Norsofiana and Samsuddin, Nurul Izzati (2011) Glass wall cleaning robot: a review. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 170-176. ISBN 9789674181529

Rahman, Md. Mozasser and Mohammed Mahil, Ahmed Murgab and Umar, Norsofiana and Samsuddin, Nurul Izzati (2011) Glass wall cleaning robot: electrical design and control. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 187-197. ISBN 9789674181529

Rahman, Md. Mozasser and Muhida, Riza and Mohd Nazmi, Mohammad Zukhair (2011) Design and development of interactive fish robot. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 144-153. ISBN 9789674181529

Rahman, Mohammed Ataur (2011) Electromagnetic actuated CVT system for vehicle. PI20091435.

Rahman, Mohammed Ataur and Hossain, Altab (2011) Design parameters study of an intelligent air-cushion tracked vehicle. Transactions of the Canadian Society of Mechanical Engineering. ISSN 0315-8977 (In Press)

Rahman, Mohammed Ataur and Hossain, Altab (2011) Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), xx (xx). ISSN 1741-5152 (O), 1744-232X (P) (In Press)

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Intelligent traction control system of an electric golf car: nonlinear dynamics investigation. In: TSME International Conference on Mechanical Engineering 2011, 19 - 21, October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand. (Unpublished)

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2011) Performance measurement of a tracked vehicle system. International Journal of Automotive Technology, 12 (4). pp. 503-512. ISSN 1229-9138

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2011) A study on automated traction control system of an electrical golf car. International Journal of Electric and Hybrid Vehicles (IJEHV), 3 (1). pp. 47-61. ISSN 1751-4096 (O), 1751-4088 (P)

Rahman, Mohammed Ataur and Sazzad, Sharif and Sadakatul, SMS Bari (2011) Fuzzy logic control electromagnetic actuated CVT system. Journal of the Chinese Institution of Engineers, 35. ISSN 0253-3839 (P), 2158-7299 (O) (In Press)

Rahman, S. M. A. and Hawlader, Mohammad Nurul Alam (2011) Performance of evaporator collector and air collector in a solar assisted heat pump dryer. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 269-282. ISBN 9789674181581

Rahman , Md Mozasser and Mohamed Rasied, Anwar Hussain and Ismail, Ahmad Zulkamal (2011) Design and development of automatic paper box folding machine. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 8-19. ISBN 9789674181734

Rasheed, Aous Naji and Kabbashi, Nassereldeen Ahmed (2011) Al-Kashi and access to the arithmetic & astronomy. In: Contributions of Eearly Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 53-57. ISBN 978-967-418-157-4

Rashid, Muhammad Mahbubur (2011) Automatic car parking management system for large parking lot. In: Mechatronics book series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 289-295. ISBN 9789674181321

Rashid, Muhammad Mahbubur (2011) Design and application of intelligent fuzzy controller on a quarter car suspension system. In: Computational intelligence in robust control: theory and application. IIUM Press, Kuala Lumpur, pp. 113-146. ISBN 9789674181963

Rashid, Muhammad Mahbubur (2011) Design and implementation of instant noodles vending machine. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 30-38. ISBN 9789674181765

Rashid, Muhammad Mahbubur (2011) Development of auto parking system & auto billing system using image processing technique (Part 1). In: Mechatronics book series: System Design and signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 267-273. ISBN 9789674181321

Rashid, Muhammad Mahbubur (2011) Development of auto parking system & auto billing system using image processing technique (Part 2). In: Mechatronics book series: System design and signal processing - volume 2. IIUM Press, Kuala Lumpur, pp. 274-280. ISBN 9789674181321

Rashid, Muhammad Mahbubur (2011) Development of auto parking system& auto billing system using image processing technique (Part 3). In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 281-288. ISBN 9789674181321

Rashid, Muhammad Mahbubur (2011) Development of wireless home power monitoring system. In: Mechatronics book series: System design and signal processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 296-303. ISBN 9789674181321

Rashid, Muhammad Mahbubur (2011) Mobile robot for fined tube inspection. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 56-63. ISBN 9789674181529

Rashid, Muhammad Mahbubur and Abd Rahim, Nasrudin and Islam, Zahurul (2011) Design and development of controller of active power filter for industrial usage part 1. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 13-20. ISBN 9789674181765

Rashid, Muhammad Mahbubur and Abd Rahim, Nasrudin and Islam, Zahurul (2011) Design and development of controller of active power filter for industrial usage part 2. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 21-29. ISBN 9789674181765

Rashid, Muhammad Mahbubur and Abdullah, Faruk and Salami, Momoh Jimoh Eyiomika (2011) Development of intelligent belt conveyor system. In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 45-49. ISBN 9789674181765

Rashid, Muhammad Mahbubur and Alliays, Farouk (2011) Development of intelligent belt conveyor system (Part 1). In: Mechatronics book series: control and intelligent systems. IIUM Press, Kuala Lumpur, pp. 39-44. ISBN 9789674181765

Rashid, Muhammad Mahbubur and Muhida, Riza and Alam, A. H. M. Zahirul and Habib Ullah, Mohammad and Kasemi, Banna (2011) Development of economical maximum power point tracking system for solar cell. Australian Journal of Basic and Applied Sciences, 5 (5). pp. 700-713. ISSN 1991-8178

Rashid, Muhammad Mahbubur and Musa, A. and Rahman, Mohammed Ataur and Farahana, Ainul F. (2011) Design and development of automatic parking system and electronic parking fee collection based on number plate recognition. In: 4th International Conference on Advanced Computer Theory and Engineering (ICACTE 2011), 28-30 December 2011, Dubai, UAE. (Unpublished)

Rashid, Muhammad Mahbubur and Salami, Momoh Jimoh Emiyoka and Abd. Rahim, M.A. and Hussain, Mohamed Azlan (2011) Analysis of Magnetorheological brake system with a fuzzy logic controller. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 231-236. ISBN 9789670225685

Rashid, Muhammad Mahbubur and Shafie, Amir Akramin and Alamgir, Tarik Bin (2011) Design and implementation of fuzzy based person following mobile robot. In: International Conference on Mechatronics and Materials Engineering (ICMME 2011), 10-12 December 2011, Qiqihar. (Unpublished)

Rashmi, W. and Ismail, Ahmad Faris and Sopyan, Iis and Jameel, Ahmed Tariq and Yusof, Faridah and Khalid, M. and Mubarak, N. M. (2011) Stability and thermal conductivity enhancement of Carbon nanotube (CNT) nanofluid using gum Arabic. Journal of Experimental Nanoscience, 6 (6). pp. 567-579. ISSN 1745-8099

Rasid, Hafizul Azizi and Jabar, Mohd Azmi and Khalifa, Othman Omran (2011) Implementation of RSA algorithm. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 141-151. ISBN 9789674181697

Razali, Faridatul Faezah and Abdul Razak, Nur Humairah and Ahmad, Zuraida (2011) The effect of fibre content on thermal property of coir fibre reinforced cement-albumen composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 172-177. ISBN 9789674181673

Rosli, Adib Hamdani and Shafie, Amir Akramin (2011) Jabir Ibn Hayyan's work on sulphur-mercury theory. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 30-35. ISBN 978-967-418-157-4

Roslin, Amir Zakwan and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Effect of compaction time on the properties of coir fiber reinforced cement-albumen composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 68-73. ISBN 9789674182311

Rusli, Nazreen and Ridzuan, Fauzana and Hassan Abdalla Hashim, Aisha and Hassan, Sajid (2011) Performance study of intra-domain mobility management. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 493-499. ISBN 9789670225685

Sabur, Abdus and Ali, Mohammad Yeakub (2011) Kerf in micro wire electro discharge machining. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 279-285. ISBN 9789674181598

Sabur, Abdus and M.A., Maleque and Mohammad , Yeakub Ali (2011) Machining of ceramic materials: a review. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 38-43. ISBN 9789674181628

Sabur, Abdus and Mohammad , Yeakub Ali (2011) Investigation of corner radius using micro wire electro discharge machine. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 82-88. ISBN 9789674181659

Sabur, Abdus and Moudood, M. A. and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2011) Effect of micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic. Applied Mechanics and Materials, 465-66. pp. 1329-1333. ISSN 1660-9336

Saeed, Rashid Abdelhaleem and Khalifa, Othman Omran (2011) Channel coding in mobile WiMAX. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 91-98. ISBN 9789674181697

Saeed, Rashid Abdelhaleem and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha and Hameed, Shihab A. (2011) Management of research and development in educational organizations. In: Computing for human services. IIUM Press, Kuala Lumpur, pp. 43-51. ISBN 9789674181611

Saeed, Rashid Abdelhaleem and M., Hasan and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Mahmud, Omer and Islam, Shayla (2011) Overview of wimax mesh. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 117-128.

Saeed, Rashid Abdelhaleem and M., Hasan and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Mahmud, Omer and Islam, Shayla (2011) Wi-Fi mesh network. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 111-116. ISBN 9789674181420

Saidin, Aznan Zuhid and Kartiwi, Mira and Latih@Abdullatif, Husam (2011) Manuscript processes monitoring system for Research Management Center. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 1-8. ISBN 9789670225814

Salami, A. F. and Anwar, Farhat and Aibinu, A. M. and Bello-Salau, H and Hassan Abdalla Hashim, Aisha (2011) Investigative analysis of clustering routing protocols for scalable sensor networks. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Salami, Abdulazeez F. and Anwar, Farhat and Aibinu, Abiodun Musa and Hussaini, Mukhtar and Bello-Salau, Habeeb (2011) State-of-the-art theoretical models for optimizing protocol performance in wireless sensor networks. In: Reseach Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 145-158. ISBN 978-967-418-149-9

Salami, Abdulazeez F. and Anwar, Farhat and Bello-Salau, H. and Aibinu, Abiodun Musa (2011) A novel biased energy distribution (BED) scheme for clustering sensor networks. In: 4th International Conference on Mechatronics (ICOM'11), 17-19 May 2011, Kuala Lumpur.

Salami, Abdulazeez F. and Anwar, Farhat and Bello-Salau, Habeeb and Hussaini, Mukhtar (2011) Practical applications and design challenges of wireless heterogeneous sensor networks. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 139-144. ISBN 978-967-418-149-9

Salami, Abdulazeez F. and Bello-Salahu, H and Anwar, Farhat and Aibinu, Abiodun Musa (2011) A novel biased energy distribution (BED) technique for cluster-based routing in wireless sensor networks. International Journal of Smart Sensing and Intelligent Systems, 4 (2). pp. 161-173. ISSN 1178-5608

Salami, Abdulazeez F. and Bello-Salau, Habeeb and Anwar, Farhat and Aibinu, Abiodun Musa and Hussaini, Mukhtar (2011) Expository analysis of the design requirements for software radio architectures in wireless sensor networks. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 168-178. ISBN 978-967-418-149-9

Salami, Abdulazeez F. and Bello-Salau, Habeeb and Anwar, Farhat and Hussaini, Mukhtar (2011) A critique of energy-efficient geographic routing schemes in wireless sensor networks. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 159-167. ISBN 978-967-418-149-9

Salami, Abdulazeez F. and Bello-Salau, Habeeb and Hussaini, Mukhtar and Anwar, Farhat (2011) Feasibility analysis of integrated hybrid systems of wireless sensor networks and conventional networks. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 179-187. ISBN 978-967-418-149-9

Salami, Abdulazeez F. and Bello-Salau, Habeeb and Hussaini, Mukhtar and Anwar, Farhat (2011) Investigation of techniques for combating malicious objects in unreliable wireless sensor networks. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 290-300. ISBN 978-967-418-149-9

Salami, Abdulazeez F. and Hussaini, Mukhtar and Anwar, Farhat and Bello-Salau, Habeeb (2011) Prospects and problems of cognitive radio network architectures in wireless sensor networks. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 245-254. ISBN 978-967-418-149-9

Salami, Abdulazeez F. and Hussaini , Muktar and Bello-Salau, Habeeb and Anwar, Farhat (2011) Information and communication privacy in wireless sensor networks. In: Research Issues in Wireless Communication Networking. IIUM Press, Kuala Lumpur, pp. 282-289. ISBN 978-967-418-149-9

Salami, Momoh Jimoh Emiyoka and Abdul Muthalif, Asan Gani and Pervez, T. (2011) Machine condition monitoring and fault diagnosis using spectral analysis techniques. In: Mechatronics book series - selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 509-519. ISBN 9789670225685

Salami, Momoh Jimoh Emiyoka and Aibinu, Abiodun Musa and Mohd Sufian, Siti Sarah (2011) Intelligent shoe guard system. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 20-28. ISBN 9789674181734

Salami, Momoh Jimoh Eyiomika and -, Nur Hanani and Billah, Masum (2011) Automatic car parking system. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 262-266. ISBN 9789674181529

Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa (2011) A new energy efficient building system. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 255-261. ISBN 9789674181529

Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa and Sani, Mohd Safie and Wahi, Nurfaizal (2011) Intelligent SCADA based pipe monitoring system. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 210-217. ISBN 9789674181529

Salami, Momoh Jimoh Eyiomika and Hla, Syed Ahmad @Moe Win (2011) Automatic pipe bursting monitoring system. In: Mechatronic Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 185-193. ISBN 9789674181765

Salami, Momoh Jimoh Eyiomika and Kamarul Bahrin, Khairul Ikram (2011) Intelligent water heater system. In: Mechatronics Book Series: Control and Intelligent Systems. IIUM Press, Kuala Lumpur, pp. 250-254. ISBN 9789674181765

Salami, Momoh Jimoh Eyiomika and Khan, Md. Raisuddin and Adeyinka Abdulquadri, Oluwo (2011) Development of an intelligent controller for tropical food storage system. In: Mechatronics book series: Robotics and automation. IIUM Press, Kuala Lumpur, pp. 236-249. ISBN 9789674181529

Salami, Momoh Jimoh Eyiomika and Khan, Md. Raisuddin and Adeyinka Abdulquadri, Oluwo (2011) Development of an intelligent controller for tropical food storage system: a review. In: Mechatronics book series: Robotics and automation. IIUM Press, Kuala Lumpur, pp. 227-235. ISBN 9789674181529

Salami, Momoh Jimoh Eyiomika and Md. Raisuddin, Khan and Aibinu, Abiodun Musa and Md Said, Syahrul Syazanizam and Basrah , Mohd Sofian (2011) Anti skid control system, a tutorial. In: Mechatronics book series: System design and signal processing (Volume 2). IIUM Press, Kuala Lumpur, pp. 71-74. ISBN 9789674181321

Salami, Momoh Jimoh Eyiomika and Md. Raisuddin, Khan and Aibinu, Abiodun Musa and Md Said, Syahrul Syazanizam and Basrah , Mohd Sofian (2011) Intelligent anti skid control system. In: Mechatronics book series: System design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 75-90. ISBN 9789674181321

Saleem, Azizullah and Othman, Raihan (2011) The contribution of Ibn Ishaq al-Kindi to light, optics and cryptology. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 91-94. ISBN 978-967-418-157-4

Saleh, Tanveer and Dahmardeh, Masoud (2011) Field-emission-assisted approach to dry micro-electro-discharge machining of carbon-nanotube forests. Journal of Applied Physics, 110 (10). ISSN 0021-8979

Saleh, Tanveer and Rahman, Mustafizur (2011) In-process truing for ELID (Electrolytic In-Process Dressing) grinding by pulsewidth control. IEEE Transactions on Automation Science and Engineering, 8 (2). pp. 338-346. ISSN 1545-5955

Samat, Noorasikin and Kemal, Indra and Burford, Robert and Whittle, Alan and Hoffman, Mark (2011) Fatigue and fracture in PVC/CaCo3 nanocomposites. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 46-61. ISBN 9789670225876

Samat, Noorasikin and Mohd Yusoff, Muhammad Alif and Zakaria, Mohd Shahrul Rizal (2011) The effect of hard nanofillers on mechanical properties of PVC nanocomposites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 29-33. ISBN 9789674182311

Samat, Noorasikin and Nor Saidi, Nor Suhaila and Sahat, Muhammad Saffua (2011) FTIR analysis - aluminium hydroxide treated with silane coupling agent. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 89-91. ISBN 9789674181680

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (2011) The effect of R-ratio on fatigue crack propagation in plasticised PVC and modified PVC. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 170-174. ISBN 9789674181680

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (2011) The effect of R-ratio on fatigue crack propagation in un-plasticised PVC and modified PVC. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 175-179. ISBN 9789674181680

Samat, Noorasikin and Whittle, Allan and Hoffman, Mark (2011) Fatigue fracture mechanism of PVC/CaCO3 nanocomposite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 34-39. ISBN 9789674182311

Samsuddin, Nurul Izzati and Hasbullah, Nurul Fadzlin and Ahmad, Salmiah (2011) Fuzzy logic based temperature control of thermoelectric cooler (TEC) for single photon avalanche diode (SPAD) application. In: 4th International Conference on Mechatronics (ICOM), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Sanni, Mistura L. and Hassan Abdalla Hashim, Aisha and Anwar, Farhat and Daoud, Jamal Ibrahim (2011) Multicasting challenges in wireless mesh networks. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 241-248. ISBN 978-967-418-160-4

Sanni, Mistura L. and Hassan Abdalla Hashim, Aisha and Naji, Ahmed Wathik and Mahmoud Ahmed, Gharib Subhi (2011) Mobility management in multicast environment. In: Multimedia Encryption, Transmission and Authentication. IIUM Press, Kuala Lumpur, pp. 249-256. ISBN 978-967-418-160-4

Saquib, Nazmus and Faris, Waleed Fekry (2011) The nano world of Munir Nahfey. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 127-134. ISBN 978-967-418-157-4

Sarifuddin, Norshahida and Ahmad, Zuraida (2011) The influence of biopolymer and natural fiber on the physical and mechanical properties of cement composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 55-61. ISBN 9789674182311

Sarifuddin, Norshahida and Ismail , Hanafi and Ahmad, Zuraida (2011) Preparation and characterization of glycerol plasticized sago starch-Kenaf core fibers biocomposites. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 101-114. ISBN 9789674181635

Sediono, Wahju (2011) Design and implementation of a simple queueing system for vehicle traffic simulator. In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 99-106. ISBN 9789674181321

Sediono, Wahju and Lestari, Andrian Andaya (2011) Determination of target speed from the FMCW radar data. In: Mechatronics book series: System design and signal processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 107-115. ISBN 9789674181321

Sediono, Wahju and Lestari, Andrian Andaya (2011) Principles of FMCW radar signal processing. In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, Malaysia, pp. 91-98. ISBN 9789674181321

Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi and Mohd Norddin, Nur Aisyah and Mohd Nasir, Nur Aimi and Kamalbahrin, Mohd Adlan Mustafa (2011) Extraction of glucose from Kenaf core by using chemical pre-treatment process. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 90-95. ISBN 9789674181673

Seeni Mohamed, Nurhafizah and Mel, Maizirwan and Anuar, Hazleen and Othman, Rashidi and Mohd Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan (2011) Factors affecting the hydrolysis process of Kenaf Biomass for lactic acid production. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, International Islamic University Malaysia, pp. 93-99. ISBN 9789674180935

Seeni Mohamed, Nurhafizah and Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Optimization of kenaf biomass's pre-treatment for polylactic acid's monomer production. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 111-120. ISBN 9789674180218

Senan, Shayma and Hassan Abdalla Hashim, Aisha and Saeed, Rashid Abdelhaleem and Daoud, Jamal Ibrahim (2011) Evaluation of nested network mobility approaches. Journal of Applied Sciences, 11 (12). pp. 2244-2249. ISSN 1812-5662 (O), 1812-5654 (P)

Senan, Shayma and Othman, Raihan (2011) Ibn al-Khatib and his theory of contagion. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 64-66. ISBN 978-967-418-155-0

Senan, Shayma and Hassan Abdalla Hashim, Aisha and Zeki, Akram M. (2011) Comparison between network simulators. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 71-74. ISBN 9789674181420

Senan, Shayma and Hassan Abdalla Hashim, Aisha and Zeki, Akram M. (2011) Nested mobile networks. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 53-57. ISBN 9789674181420

Senan, Shayma and Hassan Abdalla Hashim, Aisha and Zeki, Akram M. (2011) Introduction to mobility management. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 47-51. ISBN 9789674181420

Senan, Shayma and Zeki, Akram M. and Hassan Abdalla Hashim, Aisha (2011) Evaluation of NEMO extensions. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 59-64. ISBN 9789674181420

Senan, Shayma and Zeki, Akram M. and Hassan Abdalla Hashim, Aisha (2011) Handoff process in micromobility protocols. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 65-70. ISBN 9789674181420

Seoh , Hian Teh and Yaacob, Iskandar Idris (2011) Synthesis and characterization of electrodeposited iron-platinum nanostructured thin films. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 157-163. ISBN 9789674181680

Shabani, Hikma and Musse, Mohamud Ahmed and Khan, Sheroz and Saeed, Rashid Abdelhaleem (2011) ZigBee applications to wireless communication systems. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 133-137. ISBN 9789674181703

Shafie, Amir Akramin and -, Iqbal and Khan, Md. Raisuddin (2011) Visual tracking for human face. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674181529

Shafie, Amir Akramin and Baharudi, M. F. (2011) Anthropomorphic biped robot. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 267-274. ISBN 9789674181529

Shafie, Amir Akramin and Kasyfi, M.N. and Taufik Y, N.I (2011) Humanoid robot head. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 331-337. ISBN 9789670225685

Shafie, Amir Akramin and Khan, Md. Raisuddin and Islam, M Shehzad (2011) Trajectory planning using GPS for Unmanned Aerial Vehicle with microcontroller based system. In: Mechatronics book series: System design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 215-223. ISBN 9789674181321

Shafie, Amir Akramin and Samudin, N. (2011) A case for cooperative vision system. In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 202-207. ISBN 9789674181321

Shafie, Amir Akramin and Syukur, E. A. and Sidek, N. I. (2011) Path following autonomous vehicle based on vision system. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 208-214. ISBN 9789674181321

Shahid, Zeeshan and Abdullah, Khaizuran (2011) Wireless IP camera based on motion detection surveillance system. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 217-222. ISBN 9789674181697

Shahid, Zeeshan and Khan, Sheroz and Alam, A. H. M. Zahirul (2011) Simulations of resistance variations to pulse generator circuits. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 177-183. ISBN 9789674181710

Shahid, Zeeshan and Khan, Sheroz and Alam, A. H. M. Zahirul (2011) UWB pulse generation and shaping: analysis and simulation results. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 173-176. ISBN 9789674181710

Sharif, Md. Raihan and Ullah, M. Habib and Musse, Mohamud Ahmed (2011) Development of a method to maintain temperature and humidity in an open compound restaurant. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 166-174. ISBN 9789674181703

Sharif, Md. Raihan and Ullah, Mohammad Habib and Muhida, Riza (2011) A prototype design to maintain temperature and humidity in an open compound restaurant. European Journal of Scientific Research, 63 (2). pp. 164-171. ISSN 1450-216X, 1450-202X

Sharifuddin, Salina and Yaacob, Iskandar Idris (2011) Preparation and characterisation of low density polyethylene/layered silicate nanocomposites. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 137-143. ISBN 9789674181673

Shuriye, Abdi Omar and Ismail, Ahmad Faris (2011) Qur'anic values & engineering studies: approaches and methods in the process of Islamizing engineering curriculum. Pearson Malaysia Sdn. Bhd., Petaling Jaya, Selangor. ISBN 9789673490721 / 9673490724

Sidek, Khairul Azami and Khalil, Ibrahim (2011) Person identification in irregular cardiac conditions using electrocardiogram signals. In: 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011, 30 Aug.-3 Sept. 2011, Boston, MA.

Sidek, Khairul Azami and Khalil, Ibrahim (2011) Application of data mining on polynomial based approach for ECG biometric. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, 20-23 June 2011, Kuala Lumpur, Malaysia.

Sidek, Shahrul Na'im (2011) Robot aided upper limb rehabilitation system: results and analysis. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 73-78. ISBN 9789674181529

Sidek, Shahrul Na'im and Ab Aziz, Mohammad Afhamuddin (2011) Design and development of intelligent wiper for vehicle windshield: electrical design. In: Mechatronis book series: system design and signal processing. IIUM Press, Kuala Lumpur, pp. 63-67. ISBN 9789674181743

Sidek, Shahrul Na'im and Ibrahim, Abd Rahman (2011) Design and development of intelligent wiper for vehicle windshield: final assembly and results. In: Mechatronic book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 68-72. ISBN 9789674181734

Sidek, Shahrul Na'im and Ibrahim, Abd Rahman (2011) Design and development of intelligent wiper for vehicle windshield: mechanical design. In: Mechatronic book series: system design and signal processing. IIUM Press, Kuala Lumpur, pp. 58-62. ISBN 9789674181734

Sidek, Shahrul Na'im and Khalid, Khairul Anwar (2011) Robot aided upper limb rehabilitation system: electronics for sensors and actuators. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 69-72. ISBN 9789674181529

Sidek, Shahrul Na'im and Mohd Mustafah, Yasir and Ismail, Urwah and Che Awang , Nur Hasnaa (2011) Intelligent egg incubator: mechanical design. In: Mechatronics book series: system design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 125-136. ISBN 9789674181321

Sidek, Shahrul Na'im and Mohd Mustafah, Yasir and Ismail, Urwah and Che Awang , Nur Hasnaa (2011) Intelligent egg incubator: system integration and results. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 137-156. ISBN 9789674181321

Sidek, Shahrul Na'im and Mohd. Mustafah, Yasir and Ismail, Urwah and Che Awang , Nur Hasnaa (2011) Intelligent egg incubator: introduction. In: Mechatronics book series: system design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 116-124. ISBN 9789674181321

Sidek, Shahrul Na'im and Mokhtar, M. Ismail and M Khalil, A. Mushawwir (2011) Development of unmanned aerial vehicle – Part 1. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 123-128. ISBN 9789674181734

Sidek, Shahrul Na'im and Nawi, Hidayatullah Mohamed (2011) Robot aided upper limb rehabilitation system: mechanical design. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 64-68. ISBN 9789674181529

Sidek, Shahrul Na'im and Zakaria, M. Iqbal and A. Aziz, A. Ridwan (2011) Electrooculograghy (EOG)-controlled wheelchair. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 149-154. ISBN 9789674181734

Singh, Ramesh and Ranna, Tolouei and Tan, Chou Yong and K. L., Aw and W., H. Yeo and Iis, Sopyan and Teng, Wan Dung (2011) Sintering of hydroxyapatite ceramic produced by wet chemical method. Advanced Materials Research, 264/65. pp. 1856-1861. ISSN 1022-6680

Solihin, Mahmud I. and Akmeliawati, Rini and Ismaila B., Tijani and Legowo, Ari (2011) Robust state feedback control design via PSO-based constrained optimisation. Control and Intelligent Systems, 39 (3). pp. 168-178. ISSN 1480-1752

Solihin, Mahmud Iwan and Akmeliawati, Rini and Legowo, Ari (2011) PSO-Based robust controller design for a rotary inverted pendulum stabilization. In: Computational intelligence in robust control: theory and application. IIUM Press, Kuala Lumpur, pp. 89-112. ISBN 9789674181963

Sopyan, Iis and -, Ahmad Fadli (2011) Effect of sintering temperature on protein foaming-consolidation porous alumina-tricalcium phosphate composites. In: Advances in materials engineering - volume 2. IIUM Press, Kuala Lumpur, pp. 43-48. ISBN 9789674181680

Sopyan, Iis and ., Ahmad Fadli (2011) Effect of dispersant on protein foaming-consolidation porous alumina containing hydrothermal derived hydroxyapatite nanopowder. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 103-108. ISBN 9789674181673

Sopyan, Iis and ., Ahmad Fadli (2011) Effect of yolk addition on protein foaming-consolidation porous alumina-calcium phosphate composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 109-114. ISBN 9789674181673

Sopyan, Iis and Alqap, Asep Sofwan F. and Khushaili , Zuria Farhana (2011) Silicone doped calcium phosphate powder synthesized via hydrothermal method. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 126-131. ISBN 9789674181680

Sopyan, Iis and Alqap, Asep Sofwan F. and Rakman, Nur Ain (2011) Production of porous calcium phosphate ceramics through polymeric sponge method. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 120-125. ISBN 9789674181680

Sopyan, Iis and Hafizah, Nor and Jamal, Parveen (2011) Immobilization of TiO2 with cement: photocatalytic degradation of phenol and its kinetic studies. Indian Journal of Chemical Technology, 18 (4). pp. 263-270. ISSN 0975-0991 (O); 0971-457X (P)

Sopyan, Iis and Haruman, Esa and Sutjipto, Agus Geter Edy and Muhida, Riza (2011) Selection of materials and design specification for hip oint prosthesis. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, International Islamic University Malaysia, pp. 386-393. ISBN 9789670225685

Sopyan, Iis and Mardziah, M. and Ahmad , Zuraida (2011) Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite powder. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, 20-23 June 2011, Kuala Lumpur, Malaysia.

Sopyan, Iis and Mirza Julaihi, Muh Rafiq and Faturohman Alqap , Asep Sofwan (2011) Development of carbon doped TiO2 photocatalyst for pigment degradation. In: Advances in materials engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 19-24. ISBN 9789674181680

Sopyan, Iis and Syed Abu Bakar, Sharifah Adzila and Abd Shukor, Mohd Hamdi (2011) Morphological analysis of mechanochemically synthesized nanohydroxyapatite bioceramics. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 155-159. ISBN 9789674181673

Sulaeman, Erwin (2011) Approximate function for far-field kernel function of oscillating non-planar lifting surfaces. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 158-161. ISBN 9789674181451

Sulaeman, Erwin (2011) Approximate function for near-field kernel function of non-planar lifting surfaces. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 152-157. ISBN 978-967-418-145-1

Sulaeman, Erwin (2011) Bending stiffness matrix of non-prismatic beam elements. In: Selected topics in aerospace engineering. IIUM Press, Kuala Lumpur, pp. 99-104. ISBN 978-967-418-145-1

Suprianto, Mohamad Yuhan and Adesta, Erry Yulian Triblas (2011) High speed end milling in mould and die making. In: High Speed Cutting - An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 17-29. ISBN 978-967-418-023-2

Sutjipto, Agus Geter Edy (2011) The possibility of utilizing scanning electron microscope for materials characterization. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 127-134. ISBN 9789674181642

Sutjipto, Agus Geter Edy and , Afzeri and Shafie, Amir Akramin (2011) Recent nanofabrication of silicon dioxide on silicon wafer using AFM operated at low temperature. Applied Mechanics and Materials, 84-85. pp. 317-320. ISSN 1660-9336

Sutjipto, Agus Geter Edy and Abdul Gafar, Liyana and Roselan, Nor Azyati Syazwina (2011) Study on zinc oxide crystal growth. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 141-146. ISBN 9789674181642

Sutjipto, Agus Geter Edy and Afzeri, Afzeri and Muhida, Riza and Sopyan, Iis and Haruman, Esa (2011) The use of scanning electron microscope in evaluating insulation property. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 180-186. ISBN 9789670225685

Sutjipto, Agus Geter Edy and Budah@Udah, Muhyiddin (2011) Study on metal removing from alumina ceramics. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 137-145. ISBN 9789674181680

Sutjipto, Agus Geter Edy and Kaderi, Akbar (2011) Sample preparation on ceramics composite for cutting tools in high speed machining. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 61-79. ISBN 9789674180232

Sutjipto, Agus Geter Edy and Mohd Fuad, Nurul Hajar and -, Farah Diana (2011) Electrical property of ITO thin film deposited by Rf Magnetron Sputtering. In: Advances in materials engineering - volume 2. IIUM Press, Kuala Lumpur, pp. 49-54. ISBN 9789674181680

Sutjipto, Agus Geter Edy and Purwanto, Hadi (2011) Introduction to probability safety assessment of nuclear power plant. IIUM Press, Kuala Lumpur. ISBN 9789674180546

Sutjipto, Agus Geter Edy and Shaha, Sugrib Kumar (2011) Thin film of indium tin oxide and its deposition technology deposition. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 180-185. ISBN 9789674181680

Sutjipto, Agus Geter Edy and Yahya, Roslan (2011) Microstructure and mechanical properties of neutron transmutation doped silicon under Cf-252 Neutron Bombardment. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 16-26. ISBN 9789674181642

Syed, Sulaiman and Hassan Abdalla Hashim, Aisha and Mudathir, Muhammad A. F. (2011) Differentiated services. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 21-25. ISBN 9789674181420

Syed Abdullah, Syed Idros and Mahamad Puzi, Mohamad Syatbi and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Design and fabrication of industrial welding robotic arm. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 58-63. ISBN 9789674181598

Syed Abu Bakar, Sharifah Adzila and Sopyan, Iis and Abd Shukor, Mohd Hamdi (2011) Sodium doped nanohydroxyapatite bioceramics through mechanochemical synthesis. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 160-164. ISBN 9789674181673

Syed Meera, Zahir Hussain and Adesta, Erry Yulian Triblas (2011) Crashing a project in PERT/CPM network. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 91-98. ISBN 9789674181659

Teepol, Atika Adrina and Mohd. Fauzey, Nur Fadhilah and Sidek, Shahrul Na'im and Mohd Mustafah, Yasir (2011) Autonomous unicycle robot using reaction wheel pendulum: controller design. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 103-111. ISBN 9789674181529

Teepol, Atika Adrina and Mohd. Fauzey, Nur Fadhilah and Sidek, Shahrul Na'im and Mohd Mustafah, Yasir (2011) Autonomous unicycle robot using reaction wheel pendulum: integration and results. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 112-117. ISBN 9789674181529

Teepol, Atika adrina and Mohd. Fauzey, Nur Fadhilah and Sidek, Shahrul Na'im and Mohd Mustafah, Yasir (2011) Autonomous unicycle robot using reaction wheel pendulum: mechanical design. In: Mechatronics Book Series: Robotics and Automation. IIUM Press, Kuala Lumpur, pp. 94-102. ISBN 9789674181529

Teoh, Swin Le and Samannamunthaliar, Kumaran and Ahmad, Zuraida (2011) Mechanical behaviour of Biopolymer Cotton Albumen Clay (BCAC) composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 144-149. ISBN 9789674182311

Tijani, I. B. and Akmeliawati, Rini and Abdul Muthalif, Asan Gani and Legowo, Ari (2011) Optimization of PID controller for flexible link system using a pareto-based multi-objective differential (PMODE) evolution. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Tijani, Ismaeel and Akmeliawati, Rini and Legowo, Ari and Budiyono, Agus and Asan Gani, Abdul Muthalif (2011) H∞ robust controller for autonomous helicopter hovering control. Aircraft Engineering and Aerospace Technology, 83 (6). ISSN 0002-2667

Tijani, Ismaila and Akmeliawati, Rini and Abdul Muthalif, Asan Gani (2011) Optimizing of PID controller for flexible link system using a Pareto-based Multi-objective differential (PMODE) evolution. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Tijani, Ismaila B. and Akmeliawati, Rini and Legowo, Ari and Abdul Muthalif, Asan Gani (2011) Optimized LQR controller synthesis for 3DOF helicopter using multi-objective differential evolution(MODE). In: Computational intelligence in robust control: theory and application. IIUM Press, Kuala Lumpur, pp. 57-88. ISBN 9789674181963

Tin, Myo Han and Martono, Wahyudi and Ahmad, Wali (2011) Neural-tuned PID control for point-to-point (PTP)positioning system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 237-242. ISBN 9789670225685

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Computer communication for a smart card based ordering system via visual basic. In: Mechatronics book series: system design and signal processing (volume 2). IIUM Press, Kuala Lumpur, pp. 52-58. ISBN 9789674181321

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Electronic smart ordering system: graphical user interface. In: Mechatronics book series: System design and signal processing. IIUM Press, Kuala Lumpur, pp. 59-64. ISBN 9789674181321

Toha, Siti Fauziah and Haja Mohideen, Mohammad Zafran (2011) Intruder avoidance system via short message service (SMS). In: Mechatronics Book Series: System Design and Signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 65-70. ISBN 9789674181321

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Automatic intelligent ordering system design and tools selection. In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 46-51. ISBN 9789674181734

Toha, Siti Fauziah and Ibrahim, Rosdiazli (2011) Automatic intelligent ordering system: design and tools selection. In: Mechatronics Book Series System design and signal Processing - Volume 2. IIUM Press, Kuala Lumpur, pp. 233-239. ISBN 9789674181321

Toha, Siti Fauziah and Tokhi, Mohammad Osman (2011) Real-coded moga for intelligent control of a flexible manoeuvring system. In: Computational intelligence robust control theory and application. IIUM Press, Kuala Lumpur, pp. 28-56. ISBN 9789674181963

Uddin, Md. Jasim and Hasan, M.A and Ibrahimy, Muhammad Ibn and Nordin, Anis Nurashikin and M. Ali, M.A. and Reaz, M.B.I (2011) A high linearity CMOS RF amplifier for power control module in RFID reader. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 203-208. ISBN 9789670225685

Ullah, M. Habib and Gunawan, Teddy Surya and Sharif, Md. Raihan and Muhida, Riza and Ahmed, Musse Mohamud (2011) PIC 16F877A for hybrid vehicle controller. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications. IIUM Press, Kuala Lumpur, pp. 144-154. ISBN 9789674181703

Ullah, Mohammad Habib and Sharif, Md. Raihan and Bary, Md. Niamul (2011) Performance analysis of power control schemes in CDMA communication system. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11, 17-19 May 2011, Kuala Lumpur, Malaysia.

Ushama, Imama Karim Manba and Kabbashi, Nassereldeen Ahmed (2011) Al-Zarqali on instrumentation. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 19-23. ISBN 978-967-418-157-4

Uyop, Mohd Khairun Anwar and Hamdan, Hamid and Mat Tahir, Paridah and Anuar, Hazleen and Samat, Noorasikin and Mohamed, Siti Rafidah (2011) Surface quality of Dipterocarpus spp under tropical climate change: effect of pre-weathering. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 146-150. ISBN 9789674181680

Wan Abdul Hamid, Wan Luqman Hakim and Shuriye, Abdi Omar (2011) Al-Haytham's understanding of physical nature of light. In: Contributions of early Muslim scientists to engineering sciences and related studies. IIUM Press, Kuala Lumpur, pp. 70-73. ISBN 9789674181574

Wan Mohd Zuferi , Wan Nadzlia Shazwanie and Shuriye, Abdi Omar (2011) Ibn al-Quff on preventive medicine. In: Contributions of Muslim scientists to medicine and related sciences. IIUM Press, Kuala Lumpur, pp. 72-75. ISBN 978-967-418-155-0

Wan Nordin, Mimi Aminah and Abd El-Raouf, Hany E. and Alam, A. H. M. Zahirul and Islam, Md. Rafiqul (2011) Leaky-wave array antenna. In: Antennas and propagation: Modeling, simulation & measurements. IIUM Press, Kuala Lumpur, pp. 83-88. ISBN 9789674181383

Wan Nordin, Mimi Aminah and Abd-El-Raouf, Hany Essam and Alam, A. H. M. Zahirul (2011) A novel bandwidth enhancement technique for a compact right/left-handed (CRLH)transmission line (TL) based antenna. In: Progress in Electromagnetics Research Symposium Abstracts, 20-23 March 2011, Marrakesh, Morocco.

Wan Nordin, Mimi Aminah and Fauziz, Norsyaidatul Fairuz (2011) Radio propagation measurement and channel modelling for wireless body area network. In: Selected readings in computing and telecommunications. IIUM Press, Kuala Lumpur, pp. 125-142. ISBN 9789670225814

Wan Yusoff, Wan Ahmad Yusmawiza and A. Nasir, Safwa and Ahmad, Wan Mohamad Hakimi (2011) Investigation of the effect of “Orange Peel” surface texture on the laser sintered part. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25th - 28th September 2011, Langkawi, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Adesta, Erry Yulian Triblas and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda (2011) The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, 22 - 24 Jan 2011, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Hayyun, Muhammad Fakhrani and Abdullah, Mohd Fairus (2011) The study of the implementation of OHSAS: 18001 at Kulliyyah of Engineering. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 113-120. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Kamarudin , Muhammad Ridhuan and Mohd Salimi , Noor Iliana (2011) Reverse engineering for rapid prototyping of automotive components. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 50-56. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Md Noraini, Muhammad Fauzan and Ismail, Mohd Norazrul (2011) Performance measurement of SMEs manufacturing sector in Malaysia. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 98-103. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2011) Application of rapid prototyping in medical engineering. In: Asia Pacific Symposium on Advancements in Ergonomics and Safety (ERGOSYM 2011), 5-6 December 2011, Kangar, Perlis, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Mohd, Aziatul Ashikin and Abdul Rahim, Siti Maznah (2011) The introduction of fit manufacturing as a performance measuring approach towards sustainability of selected manufacturing companies in Malaysia. In: Design for manufacture: towards improved manufacturabilit. IIUM Press, Kuala Lumpur, pp. 105-112. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Roberts, Paul (2011) Implementation of FMECA on Fixed Assembly Cell (FAC). In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 121-128. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Saloh, Azmil (2011) Implementation of FMECA on Computer Integrated Manufacturing (CIM). In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 129-135. ISBN 9789674181598

Watanabe, M. and Khan, Md. Raisuddin (2011) Investigation of a novel type of locomotion for a snake robot suited for narrow spaces. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 346-352. ISBN 9789670225685

Widhiputranto, H. K. and Akmeliawati, Rini (2011) Educational project on a simple voice identification using frequency cepstrum coefficient and vector quantization. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 294-302. ISBN 9789670225685

Wiyarno, Budi and Mohd Yunus, Rosli and Mel, Maizirwan (2011) Extraction of Algae Oil from Nannocloropsis sp.: A study of Soxhlet and Ultrasonic-Assisted Extractions. Journal of Applied Sciences. ISSN 1812-5662 (O), 1812-5654 (P) (In Press)

Yaacob, Iskandar Idris (2011) Synthesis and characterization of nickel iron–silicon nitride nanocomposite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 167-171. ISBN 9789674182311

Yaacob, Iskandar Idris (2011) Synthesis of magnetic nanoparticles in water-in-oil microemulsions. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 164-169. ISBN 9789674181680

Yaacob, Iskandar Idris and Goh , Chia Lan (2011) Stress analysis of backend metallization. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 132-136. ISBN 9789674181680

Yaacob, Iskandar Idris and Ismail, Roslina (2011) Effect of nanosized alumina reinforcement in intermetallic nickel aluminide on the formation of y' precipitates. In: Advances in materials engineering - volume 2. IIUM Press, Kuala Lumpur, pp. 37-42. ISBN 9789674181680

Yaacob, Iskandar Idris and Kamarulzaman, Norlida and Basirun, Wan Jeffry (2011) Synthesis and characterization of lithium manganese copper oxides for use in lithium rechargeable cells. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 59-64. ISBN 9789674181642

Yaacob, Iskandar Idris and Koay, Mei Hyie (2011) Effect of composition on phase transformation of iron-platinum nanoparticles. In: Advances in materials engineering - volume 2. IIUM Press, Kuala Lumpur, pp. 31-36. ISBN 9789674181680

Yaacob, Siti Hazwani and Jarot, Sigit Puspito Wigati and Khan, Sheroz (2011) Noise modulated cryptographic generation for use in UWB wireless communication. In: Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, Kuala Lumpur, pp. 164-172. ISBN 9789674181710

Yamin, A.F.M. and Shaffiar, Norhashimah and Loh, W.K. and Tamin, M.N. (2011) Damage progression in BGA solder joints during board-level drop test. In: 13th Electronics Packaging Technology Conference (EPTC 2011), 7th - 9th December 2011 , Singapore.

Yunus, Nurul Azhani and Ismail, Ahmad Faris (2011) Contributions of Ibn Al-Haytham on optics. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 978-967-418-157-4

Yusof, Faridah and Ahmad, Ainie Asyikin (2011) Enzymatic devulcanization of waste rubber. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 144-153. ISBN 9789674181512

Yusof, Faridah and Khalid, M. and Ismail, Ahmad Faris (2011) Carbon nanotube/rubber nanocomposites. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 14-45. ISBN 9789670225876

Yusof, Faridah and Nik Abdul Ghani, Nik Rashidah (2011) Immobilization of Lipase by Cross-Linked Enzyme Aggregate (CLEA) Technology. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 120-129. ISBN 9789674181512

Yusof, Faridah and Salawudeen, T. Olalekan and Shah, Qasim Hussain and Al-Khatib, Ma'an Fahmi Rashid and Muyibi, Suleyman Aremu (2011) Chemical resistance tests on PP-ternary nanocomposite for its application in bioreactor liner fabrication. Science China Technological Sciences, 54 (8). pp. 2217-2223. ISSN 1869-1900 (O), 1674-7321 (P)

Yusof, Yusliza and Halim, Zahurin (2011) Albumen-thermoplastic sago starch reinforeced cotton: agro-green composites. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 27-40. ISBN 9789674181635

Yussof, Farrah and Ahmad, Zuraida (2011) An investigation of hybrid composites tubes subjected to quasi-static loading. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 138-143. ISBN 9789674182311

Zeki, Akram M. and Rosdi, Iffah Nadhirah and Aszenan, Azliza and Hassan Abdalla Hashim, Aisha (2011) Development of user friendly e-lectures notes. In: Advancement in E- learning. IIUM Press, Kuala Lumpur, pp. 33-38. ISBN 978-967-418-105-5

Zharif, M. and Khan, Md. Raisuddin and Billah, Md. Masum (2011) Development of a jet powered floating platform (in air). In: Mechatronics book series system design and signal processing. IIUM Press, Kuala Lumpur, pp. 104-108. ISBN 9789674181734

Zulkifli, Nur Izzati and Othman, Raihan (2011) Al-Zahrawi's explaination on bone fractures and its surgical and non-surgical treatments. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 137-143. ISBN 978-967-418-155-0

Zurkiple, Muhammad Izzat and Jarot, Sigit Puspito Wigati (2011) Simulation of artificial noise based physical layer security. In: Topics in coding, cryptography and information security. IIUM Press, Kuala Lumpur, pp. 174-182. ISBN 9789674181697

soheli, Farhana and Mahmoud, Omer and Hassan Abdalla Hashim, Aisha (2011) The application of sensor network and routing protocols in wireless communication. In: QoS And Mobile Technologies. IIUM Press, Kuala Lumpur, pp. 215-225. ISBN 9789674181420