Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2013

Article

Mushtaq, Umer and Mohamad, Souad A. (2013) ZnxCd1-x (O) thin film nanorods for PV applications. International Journal of Nano Science and Technology, 1 (3). 9 -16. ISSN 2328-5443 (O)

Abdel Wahab, Magd and Hilmy, Irfan and Hojjati-Talemi, Reza (2013) On the use of low and high cycle fatigue damage models. Key Engineering Materials, 569-70. pp. 1029-1035. ISSN 1013-9826

Abdul Aziz , Radhiyah and Sopyan, Iis (2013) Photocatalytic decomposition of acetaldehyde gas on TiO2-SiO2 thin film photocatalyst ― a kinetic analysis. Indian Journal of Chemical Technology, 20 (2). pp. 137-144. ISSN 0975-0991 E-ISSN 0971-457X

Abdullah, Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2013) Characterization of carbon nanotube aluminium nano composite- effect of ball milling time on particle size. International Journal of Academic Research. Part A. Applied and Natural Sciences, 5 (2). pp. 91-93.

Abdullah, Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2013) Effect of ball milling parameters on the synthesization of carbon nanotube aluminium nano composite. Advanced Materials Research, 626. pp. 537-541. ISSN 1022-6680

Abdullahi, U. and Maleque, Md. Abdul and Nirmal, U. (2013) Wear mechanisms map of CNT-Al nano-composite. Procedia Engineering, 68. pp. 736-742. ISSN 1877-7058

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Iqbal, Mohammed (2013) Synergistic effect on flexural properties of kenaf-glass hybrid composite. Advanced Materials Research, 626. pp. 989-992. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2013) Experimental Investigation of the Effect of Feed Rate and Negative Tool Rake Angle in High Speed Hard Turning. Journal of Advanced Science and Engineering Research, 3 (1). pp. 62-69. ISSN 2231-8844

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2013) The economic impact of using negative rake angle in high speed hard turning. Journal of Advanced Science and Engineering Research, 3 (3). pp. 309-317. ISSN 2231-8844

Al Hazza, Muataz Hazza Faizi and Md Yusof, Nabilah and -, Nur Amirah Najwa and -, Mohd Eikhwan and -, Mohamad Khazairul and Taha, Assem Hatem (2013) Experimental study of flank wear in high speed turning of stainless steel AISI 304. Journal of Advanced Science and Engineering Research, 3 (2). pp. 96-103. ISSN 2231-8844

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Fadila, N. and Hannah, N. (2013) Investigation of burr in high speed microdrilling. Applied Mechanics and Materials, 278. pp. 389-392. ISSN 1660-9336

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Khan, Ahsan Ali and Asfana, Banu and Lutfi, M. and Fahmi, M. I. (2013) Empirical modelling of vibration in micro end milling of PMMA. World Applied Sciences Journal , 21 (1). pp. 73-78. ISSN 1818-4952

Ani, Mohd Hanafi (2013) Pencemaran merentas sempadan. Malaysiakini.

Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2013) Design improvements and fabrication of conveyor belt cleaner and washing system at Westports Malaysia. International Journal of Education and Research, 1 (10). pp. 11-26. ISSN 2201-6333 (Print) ISSN: 2201-6740 (Online)

Azman, Mohd Farizul and Yahya, Azmi and Purwanto, Hadi (2013) Effect of Numbers of Fringing Electric Field (FEF) Fingers on the Performance of Sensor for Water Content in Soil. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 46-49. ISSN 1793-8198

Basmenj, Fazlollah Agamohamadi and Sorooshian, Sharyar and Ismail, Md Yusof (2013) Comparative study on quality awards. Advances in Environmental Biology, 7 (13). pp. 4032-4034. ISSN 1995-0756 E-ISSN 1998-1066

Begum, Shahida and Karim, A.N. Mustafizul and Zamani, A. S. M. and Shafii, M. A. (2013) Wall thinning and creep damage analysis in boiler tube and optimization of operating conditions. Journal of Mechatronics, 1. pp. 1-6. ISSN 2326-2885

Cahyono, Rochim B. and Rozhan, Alya Naili and Yasuda, Naoto and Nomura, Takahiro and Purwanto, Hadi and Akiyama, Tomohiro (2013) Carbon deposition using various solid fuels for ironmaking applications. Energy & Fuels, 27 (5). pp. 2687-2692. ISSN 0887-0624

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2013) Surface integrity in end milling titanium alloy Ti6Al4V under heat assisted machining. Asian Journal of Scientific Research, 2013 (1). pp. 1-6. ISSN 1992-1454

Gunawan, Gunawan and Sopyan, Iis and Nurfaezah, Siti and Ammar, Mohd (2013) Development of triphasic calcium phosphate–carbon nanotubes (HA/TCP-CNT) composite: a preliminary study. Key Engineering Materials, 531-32. pp. 258-261. ISSN 1013-9826

Hasmoni, Mohamed Hadzri and Hilmy, Irfan and Goh, Kian Liang (2013) Gastrointesinal: an unusual cause of gastric outlet obstruction. Journal of Gastroenterology and Hepatology, 28 (3). p. 585. ISSN 0815-9319

Johari, Norhasnidawani and Hassan, Noor Azlina and Halim, Zahurin (2013) Thermal analysis of kenaf sandwich panel. Advanced Materials Research, 812. pp. 271-274. ISSN 1022-6680

Kaiser, Mohammad Rejaul and Anuar, Hazleen and Razak, S.B.A. (2013) Ductile-brittle transition temperature of polylactic acid-based biocomposite. Journal of Thermoplastic Composite Materials, 26 (2). pp. 216-226. ISSN 0892-7057

Kaiser, Mohammad Rejaul and Anuar, Hazleen and Samat, Noorasikin and Abdul Razak, Shamsul Bahri (2013) Effect of processing routes on the mechanical, thermal and morphological properties of PLA-based hybrid biocomposite. Iranian Polymer Journal (English Edition), 22 (2). pp. 123-131. ISSN 1026-1265

Maleque, Md. Abdul and A., Atiqah (2013) Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials. The Arabian journal for science and engineering , 38 (11). pp. 3191-3199. ISSN 1319-8025

Maleque, Md. Abdul and Abdullahi, U. (2013) Materials and processing route for aircraft brake system. International Journal of Mechanical and Materials Engineering (IJMME), 8 (1). pp. 14-20. ISSN 1823-0334

Maleque, Md. Abdul and Bello, K. A and Md Idriss, Ahmed Nazrin and Mirdha, S. (2013) Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique. Applied Mechanics and Materials, 378. pp. 259-264. ISSN 1660-9336

Maleque, Md. Abdul and Sugrib , S. (2013) The tribological behaviour of Fe-C-Al cast iron – effect of temperature. Industrial Lubrication and Tribology, 65 (5). pp. 320-327. ISSN 0036-8792

Mohamad, Souad A. and Alaei, Iraj and Sopyan, Iis (2013) Natural photosensitizers for dye sensitized solar cells. International Journal of Renewable Energy Research (IJRER), 3 (1). pp. 138-143. ISSN 1309-0127

Mohamad, Souad A. and Mushtaq, Umer (2013) ZnxCd1-x (O) Thin Film Nanorods for PV Applications. International Journal of Nano Science and Technology, 1 (3). 09-16.

Mohamed, Abd. Rahman and Atiqah, N. and Ali, Mohammad Yeakub and Chowdhury, M. S. H. (2013) Tool vibration due to high speed micro end milling parameters. Applied Mechanics and Materials, 372. pp. 364-368. ISSN 1660-9336

Mohamed, Mohd Ambri and Lam, Pham Tien and Otsuka, N. (2013) Origin of cooperative transition of antisite-Arsenic defects in Be-doped low-temperature-grown GaAs layers. Journal of Crystal Growth, 378. pp. 329-332. ISSN 0022-0248 (In Press)

Mohamed, Mohd Ambri and Otsuka, Nobuo and Pham, Tien Lam (2013) Transition of electron transport process in Be-doped low-temperature-grown GaAs layer. Journal of Applied Physics, 114 (083716). pp. 1-4. ISSN 0021-8979

Mohamed, Mohd Ambri and Pham, Tien Lam and N., Otsuka (2013) Non-equilibrium critical point in Be-doped low-temperature-grown GaAs. Journal of Applied Physics, 113 (5). 053504 (1)-053504 (7). ISSN 0021-8979

Mohamed Ariff, Tasnim Firdaus and Kamarudin, Mohd Syahidan and Haron, Mohd Amiruddin (2013) Dry machining of brass using titanium carbonitride (TiCN) coated tool. Applied Mechanics and Materials, 372. pp. 495-500. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Paimin, Muhamad Fahmie and Hassan, Abdirahman (2013) Dry machining of T6061 aluminium alloy using titanium nitride (TiN)and titanium carbonitride (TiCN) coated tools. Applied Mechanics and Materials, 284/87. pp. 291-295. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Shafie, Nurul Syamira and Mahamad Zahir, Zamzahariah (2013) Wear analysis of Silicon Nitride (Si3N4) cutting tool in dry machining of T6061 Aluminium Alloy. Applied Mechanics and Materials, 268-70. pp. 563-567. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Sofian, Nur Najwa and Che Mat, Nor Hayati (2013) Dry machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 652/54. pp. 2129-2133. ISSN 1022-6680

Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2013) Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy. Journal of Engineering Manufacture, 227 (9). pp. 1310-1316. ISSN 2041-2975 (O), 0954-4054 (P)

Mohammed Baba, Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali and M A, Mohammad Hambiyah (2013) Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. IOP Conference Series: Materials Science and Engineering, 53. pp. 1-8. ISSN 1757-8981

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2013) Fabrication of Ca(OH)2 nanostructures by facile solution – based synthesis at various reaction temperatures as CO2 adsorbent. Materials Science Forum, 756. pp. 175-181. ISSN 1662-9752

Mohd Hatta, Maziati Akmal and Othman, Raihan and Ani, Mohd Hanafi (2013) Comparative electrochemical performance characteristics of aluminium-air cell employing seawater and NaCl electrolytes. Advanced Materials Research, 701. pp. 314-318. ISSN 1022-6680

Mohd Yusoff, Marmeezee and Ani, Mohd Hanafi and -, Suryanto (2013) Synthesis and characterization of ZnO thin film memristor. Advanced Materials Research, 701. pp. 172-175. ISSN 1022-6680

Muhamad Khairussaleh, Nor Khairusshima and C.H., Che Hassan and A.G. , Jaharah and A.K.M., Nurul Amin and A.N., Md Idriss (2013) Effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic. Wear, 302 (1-2). pp. 1113-1123. ISSN 0043-1648

Musa, Muktaruddin and Ani, Mohd Hanafi and Othman, Raihan (2013) Natural corrosion inhibitor for corrosion protection of metal artefact: an overview. Advanced Materials Research, 701. pp. 323-328. ISSN 1022-6680

Naqshbandi, Abreeq R. and Sopyan, Iis and -, Gunawan (2013) Development of porous calcium phosphate bioceramics for bone implant applications: a review. Recent Patents on Materials Science, 6. pp. 238-252. ISSN 1874-4656

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Yeakub Ali , Mohammad (2013) Influence of electrical discharge machining process parameters on surface micro-hardness of titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (3). pp. 460-464.

Nur Sa’adah, Muhamad Sauki and Herman, Sukreen Hana and Ani, Mohd Hanafi and Mohamad Rusop , Mahmood (2013) Electrical properties dependence on substrate temperature of sputtered ZnO nanoparticles thin films on teflon substrates. Advanced Materials Research, 795. pp. 403-406. ISSN 1022-6680

Othman, Maizatulnisa and Ibrahim, Norazowa and Wan Md Zin, Wan Yunus and Abdan, Khalina (2013) FTIR and TGA analysis of biodegradable poly(lactic acid)/treated kenaf bast fibre: effect of plasticizers. Pertanika Journal of Social Science & Humanities, 21. pp. 151-160. ISSN 0128-7702

Othman, Maizatulnisa and Tan, Kok Hui and Hashim, Mohd Yusof and Khalid, Halissani and Ghazali, Ruzaidi and Zakaria, Nazarudin and Mat Tahir, Paridah and Hassan, Noor Azlina (2013) Effects of Multi-Walled Carbon Nanotubes (MWCNTS) on the mechanical and thermal properties of plasticized polylactic acid Nanocomposites. Advanced Materials Research, 812. pp. 181-186. ISSN 1662-8985

Rejab, Nik Akmar and Ahmad Azhar, Ahmad Zahirani and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2013) The relationship between microstructure and fracture toughness of zirconia toughened alumina (ZTA) added with MgO and CeO2. International Journal of Refractory Metals and Hard Materials, 41. pp. 522-530. ISSN 0263-4368

Sabaruddin, Fatimah A’thiyah and Samat, Noorasikin (2013) Effect of coupling agent on the mechanical properties of flame retardant PP/ATH nanocomposites. Advanced Materials Research, 812. pp. 241-245. ISSN 1022-6680

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Khan, Ahsan Ali (2013) Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic. Procedia Engineering, 56. pp. 696-701. ISSN 1877-7058

Sahari, J. and Sapuan, S. M. and Maleque, Md. Abdul and Zainudin, E.S. (2013) Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design, 49. pp. 285-289. ISSN 0261-3069

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2013) Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research, 701. pp. 225-228. ISSN 1022-6680

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2013) Thermo-mechanical behaviours of thermoplastic starch derived from sugar palm tree (Arenga Pinnata). Carbohydrate Polymers, 92 (2). pp. 1711-1716. ISSN 0144-8617 (O)

Sarifuddin, Norshahida and Ahmad, Zuraida and Ismail , Hanafi (2013) The effect of kenaf core fibre loading on properties of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites. Journal of Physical Science , 24 (2). pp. 97-115. ISSN 1675-3402

Sarifuddin, Norshahida and Ismail , Hanafi (2013) Comparative study on the effect of bentonite or feldspar filled low-density polyethylene/thermoplastic sago starch/kenaf core fiber composites. BioResources, 8 (3). pp. 4238-4257. ISSN 1930-2126

Sulaiman, Mohd Hafis and Ridzuan, M. J.M. and Farahana, R. N. and Ayob, Amran and Syahrullail, S. (2013) Paraffinic mineral oil lubrication for cold forward extrusion: effect of lubricant quantity and friction. Tribology International, 60. pp. 111-115. ISSN 0301-679X

Syed Abu Bakar, Sharifah Adzila and Sopyan, Iis and Singh, Ramesh and Pusparini, Erlani (2013) Mechanochemical synthesis of sodium doped hydroxyapatite powder. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry, 52A. pp. 739-743. ISSN 0975-0975 (O), 0376-4710 (P)

Yunus, Nurul Azhani and Ani, Mohd Hanafi and Purwanto, Hadi and Mohd. Salleh, Hamzah and Zamani Abd Rashid, Rusila and Akiyama, Tomohiro (2013) Magnetization of low grade iron ore using empty fruit bunch ash. Advanced Materials Research, 701. pp. 141-144. ISSN 1022-6680

Zakaria, Mohd Nazarudin and Othman, Maizatulnisa (2013) The effect of alkaline treatment on water absorption and tensile properties of non-woven kenaf polyester composite. Advanced Materials Research, 812. pp. 258-262. ISSN 1022-6680

Zamani Abd Rashid, Rusila and Purwanto, Hadi and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Akiyama, Tomohiro and Yunus, Nurul Azhani (2013) Carbon doped iron ore using palm kernel shell. Advanced Materials Research, 701. pp. 28-31. ISSN 1022-6680

Zulkifli, Nur Izzati and Samat, Noorasikin (2013) Mechanical properties of green recycled polypropylene composites: effect of maleic anhydride grafted polypropylene (MAPP) coupling agent. Advanced Materials Research, 812. pp. 187-191. ISSN 1022-6680

Book

Maleque, Md. Abdul and Salit, Mohd. Sapuan (2013) Materials selection and design. Springer Briefs in Materials . Springer, Singapore. ISBN 97898-4560-37-5 (In Press)

Proceeding Paper

Ahmad, Zuraida and Halim, Zahurin (2013) Creativity and the future of engineering education: making the strange familiar. In: International Conference on Engineering Education 2013, 22nd-25th Dec. 2013, Madinah, Kingdom of Saudi Arabia.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and ., Muhammad Reza (2013) Flank wears simulation by using back propagation neural network when cutting hardened H-13 steel in CNC End Milling. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Al-Bat’hi1, Souad A. M. and Sopyan, Iis and Alaei, Iraj (2013) Natural photosensitizers for dye sensitized solar cells. In: European conference and workshop on Renewable Energy Systems (EWRES), 17-28 September 2012, Alanya / Antalya, Turkey.

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2013) Heat assisted machining of metals and alloys using induction heating method. In: International Conference on Engineering Research Innovation & Education (ICERIE 2013), 11 - 13 January 2013, Bangladesh.

Dahnel, Aishah Najiah and Barnes, Stuart and Bhudwannachai, Pipat (2013) Experimental analysis of tool wear when drilling carbon fibre composite (CFC) without cutting fluid, with cutting fluid and with a pre-cryogenically cooled tool. In: 2nd International Conference on Advanced Materials Design and Mechanics (ICAMDM 2013), 17th-18th May 2013, Kuala Lumpur.

Karim, A.N. Mustafizul and Begum, Shahida (2013) Role of surface to volume ratio of zinc oxide arrester on energy absorption capability. In: International Conference on Energy and Environment (ICEE2013), March 5-6, 2013, Putra Jaya, Malaysia. (Unpublished)

Karim, A.N. Mustafizul and Begum, Shahida and Hashmi, M. S. J. (2013) Role of surface to volume ratio of zinc oxide arrester blocks on the energy absorption capability. In: 4th International Conference on Energy and Environment (ICEE) 2013, 5 - 6 May 2013, College of Information Technology, Universiti Tenaga Nasional, Putrajaya Campus.

Khan, Ahsan Ali and Ndaliman, Mohammed Baba and Mohammad , Yeakub Ali and Al-Falahi, Muath D. and Ibrahim, Haazin A. and Mustapa, Mohad S. (2013) The Effect of EDM with external magnetic field on surface roughness of stainless steel. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Ndaliman, Mohammed Baba and Mohammad , Yeakub Ali and Lawal, Sunday Albert and Sulong, Nurul Farhana and Mohamad, Ummu Atiqah Khairiyah (2013) Effect of electrical parameters on performance of Cu-TiC mixed ceramic compact electrode in EDM process. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul (2013) Energy saving composite automotive brake rotor prototype. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013, 19-20th February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Maleque, Md. Abdul (2013) Physical property of multi walled carbon nanotube reinforced aluminium nano composite. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013, 19-20th February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Maleque, Md. Abdul and A., Atiqah and Iqbal, M. (2013) Development of kenaf hybrid composite for structural applications. In: IRIIE 2013, 19-20 February 2013, Cultural Activities Centre , International Islamic Univesity Malaysia. (Unpublished)

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2013) High performance aluminium composite brake rotor. In: International Conference And Exposition On Invention Of Institutions Of Higher Learning (PECIPTA 2013), 7th-9th Nov. 2013, Kuala Lumpur Convention Centre, Malaysia.

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2013) Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor. In: 24th International Invention, Innovation and Technology Exhibition (ITEX 2013), 9-11 May 2013, KLCC. (Unpublished)

Mohamad, Souad A. and Othman, Raihan and Mushtaq, Umer (2013) Preparation of Zn0.6Cd0.4o nanorods and its characterization. In: Third International Conference on Biotechnology (ICBIoE 2013), 2nd - 4th July 2013 , Berjaya Times Square Hotel, Kuala Lumpur. (Unpublished)

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali and M A, Mohammad Hambiyah (2013) Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia.

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013, 28-29 August 2013, Hotel Equatorial , Malacca.

Samat, Noorasikin and Zulkifli, Nur Izzati and Anuar, Hazleen (2013) Mechanical properties of recycled PP reinforced with microcrystalline cellulose: effect of MAPP content. In: 9th International Conference on Composite Science and Technology (ICCST/9), 24-26 April 2013, Sorrento, Naples Italy.

Monograph

Wan Yusoff, Wan Ahmad Yusmawiza (2013) A surgical training model manufacturer using fused deposition (FDM) modeling. Research Report. s.n, Kuala Lumpur. (Unpublished)