Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA174 Engineering design"

Abdul Rahman, Muhammad Taqiuddin and Ahmad, Salmiah and Akmeliawati, Rini (2013) Integrated modeling and analysis of an extendable double-link two wheeled mobile robot. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM’13), , July 9-12, 2013, Wollongong, Australia.

A

Abdul Hamid, Syamsul Bahrin and Md Yusuf, Hazlina and Abd Latif, Muhamad Hafiz (2015) Challenges in simulating robotics and automation systems for real world applications utilising project based courses. In: 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IRIS), 18th-20th October 2015, Langkawi, Malaysia.

Abdul Hamid, Syamsul Bahrin and Shaharom, Rabiatul Adawiyah (2017) Monitoring system using handwritten sample pressure point. International Journal of Mechanical and Production Engineering (IJMPE), 5 (2). pp. 103-108. ISSN 2320-2092 E-ISSN 2321-2071

Abdul Rahman, Muhammad Taqiuddin and Ahmad, Salmiah and Akmeliawati, Rini and Altalmas, Tareq, M. and Aula, Abqori (2013) Centre of Gravity (C.O.G)-based analysis on the dynamics of the extendable Double-Link Two-Wheeled Mobile Robot. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (In Press)

Abdullah, Muhammad and Idres, Moumen and Mohammed Sapardi, Mohd Azan (2022) Model predictive control for regulating fuel cell stack temperature and air flow rate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (2). pp. 171-181. ISSN 2289-7879

Abdullah, Muhammad Amirul and Ahmad, Salmiah and Toha, Siti Fauziah (2015) Design and material analysis of spherical mobile robot for bouncing mechanism. In: 11th IFIP WG 12.5 International Conference, AIAI 2015, September 14–17, 2015, Bayonne, France.

Abdullah, Nur Azam (2021) Segerakan penggantian Hawk tingkat keupayaan aset TUDM. Berita Harian, 29 November 2021. p. 12.

Abdullah, Nur Azam (2021) UAV in defence: future outlook for Malaysia. In: Aerospace Research Interest Laboratory(ARIEL) Seminar Series, 10 Mar 2021, Online. (Unpublished)

Altalmas, Tareq, M. and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im and Aula, Abqori (2013) Mechanical design and simulation of wwo-Wheeled wheelchair using solidworks. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (In Press)

Altalmas, Tareq, M. and Aula, Abqori and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im (2013) Integrated design, modeling and analysis of a two-wheeled wheelchair for disabled. In: IIUM Research, Invention and Innovation Exhibition 2013, 19 - 20 February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Altalmas, Tareq, M.K. and Aula, Abqori and Ahmad, Salmiah and Tokhi, Mohammad Osman and Akmeliawati, Rini (2016) Integrated modelling and design for realizing a two-wheeled wheelchair for disabled. Assistive Technology: The Official Journal of RESNA. pp. 1-53. ISSN 1040-0435 E-ISSN 1949-3614

Ariff, Tasnim Firdaus and Al-Qwairi, Osamah Omar (2020) Mechanical and structural properties of the butt welded joint in high strength structural steel (ST52-3) using gas metal arc welding and oxyfuel gas welding. TEST Engineering and Management, 83 (May – June 2020). 1446 -1450. ISSN 0193-4120

Ariff, Tasnim Firdaus and Jalil, Muhammad Ezurin and Bahar, Rubina (2014) Design improvements in the inner shell of a motorbike helmet using coconut fiber composite. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 59-65. ISBN 978-969-9952-07-4

Ariff, Tasnim Firdaus and Tukiman, Nurul Hannah Atikah and Bahar, Rubina (2016) Design improvements in underground watering system for small local farming industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015;, 12-14 Nov 2015, Kuala Lumpur.

Aula, Abqori and Akmeliawati, Rini and Ahmad, Salmiah (2013) Towards port-hamiltonian approach for modeling and control of two-wheeled wheelchair. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July, 2013,, Kuala Lumpur, Malaysia. (Unpublished)

Aula, Abqori and Altalmas, Tareq M. and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im (2013) Integrated design, modelling and analysis of two-wheeled wheelchair for disabled. In: 16th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR’13), 14 – 17 July 2013, Sydney, Australia.

Ayob, Mohd Fairullazi (2017) Reports of professional assessment for PE examination (Ir). Other. UNSPECIFIED. (Unpublished)

Ayob, Mohd Fairullazi (2017) Reports of technical design assessment and statements of industrial experience for PE exam (Ir). UNSPECIFIED. UNSPECIFIED. (Unpublished)

Ayob, Mohd Fairullazi and Abdul Rashid, Khairuddin (2019) A system for road pavement Life Cycle Cost (LCC) analysis. In: Invention & Innovation Awards 2019, Malaysia Technology Expo (MTE 2019), 21st-23rd February 2019, Putra World Trade Centre, Kuala Lumpur. (Unpublished)

B

Baba, Tamana and Che Mustapha, Nurul Arfah and Hasbullah, Nurul Fadzlin (2021) Noise sources extraction for conducted emission modeling of IC’s using IBIS models. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Bhuiyan, Md. Moinul Islam and Rashid, Muhammad Mahbubur and Alamgir, Tarik and Bhuiyan, Munira and Kajihara, Masanori (2013) Development of a High Hertz-Stress Contact for conventional batch production using a unique scribing technology. In: IIUM Engineering Congress 2013 (ICOM '13), 2-4 Jul 2013, Berjaya Times Square Hotel, Kuala Lumpur. (Unpublished)

Bhuiyan, Moinul (2009) Optimization of low normal force contact spring. In: Tyco Electronics Japan Technical Conference 2009, Oct 2009, Kawasaki, Japan. (Unpublished)

Bhuiyan, Moinul and Haga, Yoichi and Esashi, Masayoshi (2005) Design and characteristics of large displacement optical fiber switch. Journal Of Quantum Electronics, 41 (2). pp. 242-249. ISSN 0018-9197

Bhuiyan, Moinul and Rashid, Muhammad Mahbubur and Ahmed, Sayem and Bhuiyan, Munira and Kajihara, Masanori (2013) Design and fabrication stable LNF contact for future IC application. IOP Conference Series: Materials Science and Engineering, 53 (012060). ISSN 1757-8981

C

Che Mustapha, Nurul Arfah and Jamal Ali, Nurulhusna (2021) Thermopile array sensor for children detection in automobile application. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE), 22nd-23rd June 2021, Kuala Lumpur, Malaysia.

D

Denan, Zuraini (2015) Research Methods for Visual Comfort Study. In: Methodologies in Architectural Research. First Edition . IIUM Press, IIUM, Kuala Lumpur, Malaysia, pp. 87-106. ISBN 978-967-418-331-8

Diefes-Dux, H. A and Wan Salim, Wan Wardatul Amani (2012) Transforming the first-year engineering experience through authentic problem-solving: taking a models and modeling perspective. Procedia Social and Behavioral Sciences Journal, 56. pp. 314-332. ISSN 1877-0428

E

Eusuf, Muhammad Abu and Salleh, Md. Noor (2018) A probabilistic manifestation for the assessment of structural behaviour and understanding professional ethics: A multi- dimensional approach. Journal of Quantity Surveyor and Construction Business. (In Press)

H

Hafizalshah, Muhammad Hariz and Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im and Md. Yusof, Hazlina (2024) Enhancing decision-making based on social responses for Human-Robot Interactions (HRI) applications. JOURNAL OF MECHATRONICS AND INTELLIGENT MANUFACTURING, 6 (1). pp. 7-18. E-ISSN 2637-0883

Hafizuddin, Muhammad and Basor, Yasir Irsyad and Mohd Yusoff, Marmeezee and Mohd Razib, Mohd Asyraf and Malek, Mohd Firdaus and Mohamed, Ruziana and Kamarzaman, Azlin Haezrina (2022) Development Of UV monitoring system using metal oxide based sensor. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 9th-10th August 2022, Kuala Lumpur (virtual event).

Hafizuddin, Muhammad and Shukor, Muhammad Danish and Mohd Razib, Mohd Asyraf and Engliman, Nurul Sakinah and Malek, Mohd Firdaus and Mohamed, Ruziana and Mamat, Mohamad Hafiz and Sutjipto, Agus Geter Edy and Kamarzaman, Azlin Haezrina and Mohd Yusoff, Marmeezee (2022) Development of data acquisition system for mobile ultraviolet (uv) monitoring device. Journal Information System and Technology Management (JISTM), 7 (27). pp. 280-288.

Hamzah, Hairul Aini and Hamzah, Raseeda and Jamil, Nursuriati and Abdul Rahim, Siti Khatijah Nor and M. Asmuei, Abdul Rahmad and Mushaimi, Muhd Aizzad and Noor, M.H.M and Abu Samah, Khyrina Airin Fariza (2020) A self-healing data management architecture for IoT applications: a case study of smart urban farming on high-rise buildings. International Journal of Emerging Trends in Engineering Research (IJETER), 8 (1 Special Issue 1). pp. 137-141. E-ISSN 2347-3983

Hawlader, Mohammad Nurul Alam (2011) Engineering design: an approach to the development creativity. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 132-139. ISBN 9789674181581

Hrairi, Meftah and Abdullah, Abdullah F. and Ahmed, Mirghani Ishak (2012) Design and simulation of a thermoelectric cooling system for motorcyclist helmet. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE’2012), 3-5 July 2012, Kuala Lumpur, Malaysia.

I

Idres, Moumen and Mohd Nizum, Ahmad Hazwan and Wan Mohamad Fathi, Wan Muhammad Adam and Okasha, Mohamed (2022) Optimization of fuel economy for a multimode plug-in hybrid electric vehicle using Atkinson thermodynamic cycle engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 148-159. ISSN 2289-7879

Idres, Moumen and Mohd Nizum, Ahmad Hazwan and Wan Mohamad Fathi, Wan Muhammad Adam and Okasha, Mohamed Elsayed Aly Abd Elaziz (2021) Optimization of fuel economy for a multimode plug-in hybrid electric vehicle. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22-23 Jun 2021, Virtual. (Unpublished)

Idres, Moumen and Saiful Azmi, Muhamad Adi Muqri (2021) Computational prediction of the performance map of a transonic axial flow compressor. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

J

Jamal, Parveen and Muhida, Riza and Raja, J. and Al-Herbawi, S. (2008) Design and fabrication of a device for measuring thermal diffusivity of food substances. In: Seminar on Food Biotechnology: Perspectives, Challenges and Opportunities, 25 - 26 November 2008, Equatorial Hotel, Bangi.

Johar, Firdaus and Ariff, Tasnim Firdaus (2022) Mechanical and microstructural properties of hybrid bio-composites using microwaved coconut fibre and rice husk. In: 2nd International Conference on Recent Trends in Applied Research, ICoRTAR 2021, 8-9 October 2021, Online.

K

Kamalaldin, Karim and Okasha, Mohamed Elsayed Aly Abd Elaziz (2014) Low inclination circular orbits for remote sensing satellites. Applied Mechanics and Materials, 629. pp. 298-303. ISSN 1660-9336

Kamarudin, Mohamad Norfaieqwan and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Ibrahim, Yasser E. (2022) Buckling analysis of a thin-walled structure using finite element method and design of experiments. Aerospace, 9 (10). pp. 1-31. E-ISSN 2226-4310

Khalit, Muhammad Ilham and Hurtis, Roger Ashley and Khidhir, Basim A. and Anuar, Hazleen (2022) Harvesting electrical energy from automatic sliding doors use. Advanced Engineering Forum, 47. pp. 29-41. ISSN 2234-9898 E-ISSN 2234-991X

L

L Y, Qiu and Nik Azizan, N Z and Md. Kassim, Tahara Ramadzan (2023) Development of fragility curves for bridge. In: 1st International Conference on Manufacturing Engineering Technology, IConMET 2021, 14-15 July 2021, Virtual.

M

Maleque, Md. Abdul (2013) Energy saving composite automotive brake rotor prototype. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013, 19-20th February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Maleque, Md. Abdul and Adebisi, Adetayo A. and Shah, Qasim Hussain (2012) Energy and cost analysis of weight reduction using composite brake rotor. International Journal of Vehicle Structures & Systems, 4 (2). pp. 69-73. ISSN 0975-3540 (O), 0975-3060 (P)

Mamun, Abdullah Al and Muthalif, Asan G. A. and Ahmad, Zuraida and Ismail, Ahmad Faris and Ismail, Kamsiah and Maleque, Md. Abdul (2020) Islamisation of engineering education – a case at IIUM. Universal Journal of Educational Research, 8 (2). pp. 355-361. ISSN 2332-3205 E-ISSN 2332-3213

Mamun, Abdullah Al and Salleh, Md Noor and Ibrahim, Saerahany Legori and Masbah, Dani Irwan and Daoud, Jamal Ibrahim and E.M. Yahya Khan, Nasehir Khan (2022) Importance of time of concentration in run off peak flow estimation. In: 1st International Conference on Civil Engineering 2022, 9-10 August 2022, Gombak, Kuala Lumpur ( Virtual Conference). (Unpublished)

Mat Nawi, Mohd Nazir and Husin, Hafiz and Gebremariam, Mebrahitom Asmelash and Kushendarsyah, Saptaji and Azhari, Azmir (2024) Investigation on optimum waterjet cleaning parameters for minimum surface impact during paint removal from mild steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 120 (2). pp. 11-28. ISSN 2289-7879

Md Kassim, Tahara Ramadzan and A. Majid, Taksiah (2023) Study on earthquake characteristics and method of assembling repeated earthquakes on the 2D seismic design RC frames. In: AWAM International Conference on Civil Engineering, AICCE 2022Penang, 15 - 17 February 2022, Penang.

Md. Kassim, Tahara Ramadzan and A. Majid, Taksiah (2023) Sustainable seismic design consideration under repeated earthquakes. In: Cradle to Cradle of Environment through Technology; A Sustainability Perspective. LifeVision Resources, Seremban. NS, pp. 396-420.

Mohamed Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2014) Improving efficiency and enhancing productivity in transporting fertilizers by using conveyor belt cleaners. Advanced Materials Research, 1082. pp. 505-510. ISSN 1022-6680

Mohd Tombel, Nor Syahira and Mohd Yusoff, Marmeezee and Mohd Zaki, Hasan Firdaus and Md Yakin, Firzalaila Syarina and Mohamad Badaruddin, Siti Aishah (2022) Nanoparticles functionalized reduced graphene oxide thin films for detection of acetic acid at low concentrations. Malaysian Journal of Analytical Sciences, 26 (6). pp. 1158-1167. ISSN 1394−2506

Mukhtar, Azfarizal and Ng, Khai Ching and Yusoff, Mohd Zamri (2018) Design optimization for ventilation shafts of naturally-ventilated underground shelters for improvement of ventilation rate and thermal comfort. Renewable Energy, 115. pp. 183-198. ISSN 0960-1481

Mukhtar, Azfarizal and Ng, Khai Ching and Yusoff, Mohd Zamri (2018) Passive thermal performance prediction and multi-objective optimization of naturally-ventilated underground shelter in Malaysia. Renewable Energy, 123. pp. 342-352. ISSN 0960-1481

Mukhtar, Azfarizal and Ng, Khai Ching and Yusoff, Mohd Zamri and Wah, Yen Tey and Lit, Ken Tan (2019) Performance assessment of passive heating and cooling techniques for underground shelter in equatorial climate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 20-32. E-ISSN 2289-7879

N

Nik Abdul Ghani, Nik Rashida and Jami, Mohammed Saedi and Alam, Md Zahangir and Engliman, Nurul Sakinah (2023) Enhanced removal of multi-metal ion by graphene oxide polyethersulfone nanocomposite adsorptive membrane. In: IIUM Engineering Congress 2023 (IEC ’23), 15th - 16th August 2023, Hybrid Mode.

Nor Azman, Muhammad Ammar and Azian, Eiman Salleh and Zainal Abidin, Zulkifli and Mohd Yusoff, Marmeezee and Ibrahim, Ahmad Imran and Mohd Salim, Mohd Nazli and Abu Yamin, Muttaqqin (2022) Visual detection of biofouling using hue-saturation-value (HSV) colour for ship hull cleaning robot. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 9th-10th August 2022, Kuala Lumpur (virtual event).

Nor Azman, Muhammad Ammar and Zakaria, Muhammad Zulkarnain and Abidin, Zulkifli Zainal and Ahmad Imran Ibrahim, Ahmad Imran Ibrahim and Mohd Salim, Mohd Nazli and Abu Yamin, Muttaqqin and Mohd Yusoff, Marmeezee (2022) Analysis of permanent magnetic-based climbing robot design for ship hull and oil tank services. Journal Information System and Technology Management (JISTM), 7 (29). pp. 10-23. E-ISSN 0128-1666

Nordin, Norhuda Hidayah and Mohamad, Faiz Syazwan and Jamal, Nur Ayuni (2020) Non-isothermal crystallization kinetics of a rapidly solidified as-cast TiZrHfNiCu high entropy bulk metallic glass. World Journal of Engineering and Technology, 8. pp. 280-295. ISSN 2331-4222 E-ISSN 2331-4249

O

Okasha, Mohamed Elsayed Aly Abd Elaziz (2014) Guidance solutions for multiple vehicle assembly. Advanced Materials Research, 1016. pp. 797-801. ISSN 1022-6680

P

Park, Dongmyung and Bahrudin, Fadzli Irwan and Han, Ji (2020) Circular reasoning for the evolution of research through a strategic construction of research methodologies. International Journal of Quantitative and Qualitative Research Methods, 8 (3). pp. 1-23. ISSN 2056-3620 E-ISSN 2056-3639

S

Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Rosli, Adib Hamdani (2023) Influence of composite skin on the energy absorption characteristics of an aircraft fuselage. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 13-20. E-ISSN 0128-1852

Syed Abdullah, Syed Idrus Bin and Iannucci, Lorenzo and Greenhalgh, Emily S and Abdullah, Nur Azam (2022) The delamination behaviour of Vectran/Epoxy composites having a novel non-crimp fabric architecture. Composites Part B: Engineering, 228 (109413). pp. 1-12. ISSN 1359-8368 E-ISSN 1879-1069

T

Tahoun, Ahmed and Kafafy, Raed and Jawamir, Karam and Mohammed Aldheeb, Mohammed Abdulmalek and Khalil, Abdul Mushawwir (2016) apparatus and method to remotely control fluid flow in tubular strings and wellbore annulus. US9453388B2.

W

Wahid, Zaharah and Za'bah, Nor Farahidah and Ahmad, Kartini and Yasin, Nabila Huda (2015) Experimental study on potential use of photochromic thin film as energy harvester. Australian Journal of Basic and Applied Sciences, 9 (28(S)). pp. 45-49. ISSN 1991-8178

Wan Salim, Wan Wardatul Amani and Diefes-Dux, Heidi A. (2012) Problem Formulation within open-ended problems: looking through the structure, behavior, function (SBF) and novice-expert (NE) frameworks. Procedia Social and Behavioral Sciences Journal, 56. pp. 160-174. ISSN 1877-042

Wan Yusoff, Wan Ahmad Yusmawiza and Badri, Zu Hazmin and Masri, Zainal and Hussin, Zahir (2009) Benchmarking the rapid prototyping machines (RPM) for education purpose using quality function deployment (QFD). In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2011) Application of rapid prototyping in medical engineering. In: Asia Pacific Symposium on Advancements in Ergonomics and Safety (ERGOSYM 2011), 5-6 December 2011, Kangar, Perlis, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Syazmi, Khairil and Mohd Naeem, Saripan (2009) Investigation on mechanical properties of ABS using rapid rpototyping technology and injection molding process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Z

Zainuddin, Ahmad Anwar and Ahmad Puzi, Asmarani and Sahak, Rohilah and Abdul Rahman, Siti Husna and Abdul Majid, Mohamed Ibrahim and Jusat, Nuaomi and Mohd Mansor, Ahmad Fairuzabadi and Hamizan, Hasbullah and Subramaniam, Krishnan and Svpk, Satya Devu and Mohamad Yunos, Muhammad Farhan Affendi (2022) Design of mobile application for SME business sustainability during post Covid-19. In: 2022 International Visualization, Informatics and Technology Conference (IVIT), 01-02 Nov 2022, Kuala Lumpur.