Items where Division is "Kulliyyah of Engineering" and Year is 2016

.

., Md Nuruzzaman and Al Mamun, Abdullah and Salleh, Md Noor (2016) Application of pond to improve river water quality. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

A

A. H., Hazrin and A., Hizrri and A. A., Anis Syazana and H., Khadijah and Nordin, Noor Faizul Hadry and A., Norhidayah and Mohd Aris, Mohd Shukri (2016) Airborne particulate matters and microorganisms in library: An introduction of disinfection method towards safe and health indoor environment. UNSPECIFIED. UNSPECIFIED. (Unpublished)

A. Rahman, M. Safwan and Htike@Muhammad Yusof, Zaw Zaw (2016) Development of Omni-directional robotic car with human tracking mechanism. In: First Bi-annual Engineering Conference on Undergraduate Research, Kulliyah of Engineering, IIUM. (Unpublished)

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi and Abdul Hadi, Musfirah (2016) Temperature at the tool-chip interface in cryogenic and dry turning of AISI 4340 using carbide tool. International Journal of Simulation Modelling, 15 (2). pp. 201-212. ISSN 1726-4529

Abd Halim, Nor Farah Huda and Ascroft, Helen and Barnes, Stuart (2016) Machinability study of ultrasonic assisted machining (UAM) of carbon fibre reinforced plastic (CFRP) with multifaceted tool. In: 7th CIRP Conference on High Performance Cutting 2016, 31st May-2nd June 2016, Chemnitz; Germany.

Abd Rahim, Toibah and Sopyan, Iis and Mel , Maizirwan (2016) Vero cell culture on magnesium doped biphasic calcium phosphate scaffolds. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Abdul Ghaffar, Alia Farhana and Richardson, Tom (2016) Position tracking of a quadrotor using model reference adaptive control. In: Guidance, Navigation and Control Conference, AIAA Sci Tech Forum 2016, 4th-8th Jan. 2016, San Diego, California. (Unpublished)

Abdul Hamid, Nurfarhana and Alam, Md. Zahangir (2016) Development of indigenous biofilm for enhanced biogas production from palm oil mill effluent. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Abdul Malek, Norun and Mohd. Ramly, Athirah and Abdullah Sidek, 'Atiah and Mohamad, Sarah Yasmin (2016) Characterization of acrylonitrile butadiene styrene material for a 3D printed microstrip patch antenna. In: 2016 International Conference on Electrical, Electronic, Communication and Control Engineering (ICEECC 2016), 18th-19th December 2016, Johor Bahru, Johor. (Unpublished)

Abdul Rahman, Farah Diyana and Ibrahim, Ahmad Imran (2016) No-reference spatio-temporal activity difference PSNR estimation. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016), 25th-27th July 2016, Kuala Lumpur.

Abdul Razak, Rajabi and Barkeshli, Mandana and Othman, Raihan (2016) Traditional Malay black ink: An analysis of its recipes and characteristics. In: International Conference on Architecture & Built Environment (ICABE 2016), 5th-6th October 2016, Kuala Lumpur. (Unpublished)

Abdullah, Muhammad and Rossiter, John Anthony (2016) Utilising laguerre function in predictive functional control to ensure prediction consistency. In: 2016 UKACC 11th International Conference on Control (CONTROL), 31st August-2nd September 2016, Belfast, Northern Ireland, UK.

Abdullah M. A, Awad and Hassan Abdalla Hashim, Aisha and Ab. Rahim, Rosminazuin (2016) Queue backlog as a node metric for RPL protocol. In: ICCCE 2016 International Conference on Computer and Communication Engineering 2016, 25-27 Jul 2016, Kuala Lumpur Malaysia.

Abdullahi, Auwalu M. and Mohamed, Zaharuddin and Zainal Abidin, Mohamad Shukri and Akmeliawati, Rini and Husain, Abdul Rashid and A. Bature, Amir (2016) Adaptive input shaping for sway control of 3D crane using a pole-zero cancellation method. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13-14 December 2015, Berjaya Times Square Hotel Jalan Imbi, Kuala Lumpur.

Aboadla, Eziddin Hassan Elmabrouk and Khan, Sheroz and Habaebi, Mohamed Hadi and Gunawan, Teddy Surya and Hamida, Belal Ahmed and Yaacob, Mashkuri (2016) Effect of modulation index of pulse width modulation inverter on total harmonic distortion for sinusoidal. In: International Conference on Intelligent Systems Engineering, 15-17 Jan 2016, Islamabad, Pakistan.

Abu Bakar, Ayu Haslija and Koay, Yin Shin and Ching, Yernchee and Chuah Abdullah, Luqman and Choong, Thomas S Y and Al-Khatib, Ma'an Fahmi Rashid and Mobarekeh, Mohsen Nourouzi and Mohd Zahri, Nur Amirah (2016) Removal of fluoride using quaternized palm kernel shell as adsorbents: Equilibrium isotherms and kinetics studies. BioResources, 11 (2). pp. 4485-4511. ISSN 1930-2126

Ahamad Sukor, Masturah and Mohd. Ramli, Huda Adibah (2016) Channel quality information (CQI) reporting algorithms in LTE-A. International Journal of Soft Computing, 11 (4). pp. 242-246. ISSN 1816-9503

Ahamed, Raju and Rashid, Muhammad Mahbubur and Firdaus, Md Meftahul and Md. Yusof, Hazlina (2016) Design and modeling of energy generated magneto rheological damper. Korea-Australia Rheology Journal, 28 (1). pp. 67-74. ISSN 1226-119X E-ISSN 2093-7660

Ahmad, Kartini and Hanouf, Zahir (2016) Newtonian heating effect on Casson fluid flow over nonlinearly stretching sheet. In: 2nd International Conference on Pure and Applied Sciences (ICPAS 2016), 1st-5th June 2016, Istanbul, Turkey. (Unpublished)

Ahmad, Kartini and Ishak, Anuar (2016) Magnetohydrodynamic (MHD) Jeffrey fluid over a stretching vertical surface in a porous medium. Propulsion and Power Research, 6 (4). pp. 269-276. ISSN 2212-540X

Ahmad, Kartini and Wahid, Zaharah and Hanouf, Zahir (2016) Heat transfer analysis for Casson fluid flow over stretching sheet with Newtonian heating and viscous dissipation effects. In: The 6th International Conference on Mathematics and Natural Sciences 2016 (ICMNS 2016), 2nd-3rd November 2016, Bandung, Indonesia. (Unpublished)

Ahmad, Yasser Asrul and Nazim, NJ and Yuhaniz, SS (2016) Design of a terminal node controller hardware for CubeSat tracking applications. In: 6th Innovation in Aerospace Engineering and Technology (AEROTECH 2016), 8th-9th November 2016, Kuala Lumpur.

Ahmad, Zuraida and Zain, Saidi and Ismail, Ahmad Faris and Salleh, Md. Noor and Machouche, Salah (2016) Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC), 4. pp. 1-7. E-ISSN 2289-9855

Ahmad Fuad, Fazia Adyani and Houston, Douglas Robert and Michels, Paul A M and Fothergill- Gilmore, Linda A. and Walkinshaw, Malcolm Douglas (2016) Inhibitors of leishmania mexicana phosphoglycerate mutase identified by virtual screening and verified by inhibition studies. Sains Malaysiana, 45 (7). pp. 1113-1120. ISSN 0126-6039

Ahmed, H and Faris, Waleed Fekry and Akmeliawati, Rini (2016) Fuel efficient intelligent control of heavy trucks. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4164-4171. ISSN 1819-6608

Akhtaruzzaman, Md and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Gait analysis: systems, technologies, and importance. Journal of Mechanics in Medicine and Biology, 16 (7). pp. 1-45. ISSN 0219-5194

Akhtaruzzaman, Md. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Automated threshold detection for object segmentation in colour image. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4100-4104. ISSN 1819-6608

Akhtaruzzaman, Md. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Representation of human gait trajectory through temporospatial image modelling. ARPN Journal of Engineering and Applied Sciences Open Access, 11 (6). pp. 4105-4110. ISSN 1819-6608

Al Mannai, Essa Mohammed E.K. and Shuriye, Abdi Omar and Abdel Salam, El Fatih Abdullahi (2016) الوساطية في العلاقات الدولية. Australian Journal of Islamic Studies, 6&7 (June/December). pp. 1-18. ISSN 1834-6170 E-ISSN 2208-469X

Al Mannai, Essa Mohammed E.K. and Shuriye, Abdi Omar and Abdul Salam, El Fatih (2016) الوساطة الإنسانية وحكمها في الفكر العربي والإسلامي. Australian Journal of Islamic Studies, 6&7 (1 (June/December)). pp. 1-32. ISSN 1834-6170 E-ISSN 2208-469X

Al-Ahmari, A. and Rasheed, M. Sarvar and Khan Mohammed, Muneer and Saleh, Tanveer (2016) A hybrid machining process combining micro-EDM and laser beam machining of nickel-titanium based shape memory alloy. Materials and Manufacturing Processes, 31 (4). pp. 447-455. ISSN 1042-6914 E-ISSN 1532-2475

AlDahoul, Nouar and Htike@Muhammad Yusof, Zaw Zaw (2016) HELM based Reinforcement Learning for Goal Localization. In: International Conference on Mechanical, Automotive and Aerospace Engineering, July 25-27, 2016, Kuala Lumpur, Malaysia. (Unpublished)

Alam, Mohammed Khorshed and Abdul Latif, Suhaimi and Akter, Mahmuda and Anwar, Farhat and Hasan, Mohammad Kamrul (2016) Enhancements of the dynamic TXOP limit in EDCA through a high-speed wireless campus network. Wireless Personal Communications, 90 (4). pp. 1647-1672. ISSN 0929-6212

Alfar, Ibrahim J. and Khorshidtalab, Aida and Akmeliawati, Rini and Ahmad, Salmiah and Jaswir, Irwandi (2016) Towards authentication of beef, chicken and lard using micro near-infrared spectrometer based on support vector machine classification. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4130-4136. ISSN 1819-6608

Ali, Fathilah and Jama Awale, Raina and Fakhruldin, Hanan and Anuar, Hazleen (2016) Plasticizing poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material = Peningkatan fleksibiliti poli(laktik asid) menggunakan minyak kelapa sawit terepoksi untuk aplikasi pembungkus mesra alam. Malaysian Journal of Analytical Sciences, 20 (5). pp. 1153-1158. ISSN 1394-2506

Ali, Maisarah and Oladokun, Majeed and Osman, Samsul Bahrin and Samsuddin, Niza and Hamzah, Hairul Aini (2016) Moisture condensation on building envelopes in differential ventilated spaces in the tropics: quantitative assessment of influencing factors. In: The 4th International Building Control Conference 2016 (IBCC 2016), 7th-8th March 2016, Kuala Lumpur.

Ali, Maisarah and Oladokun, Majeed Olaide and Osman, Samsul Bahrin and Mohd. Din, Shamzani Affendy and Ibrahim, Mohd Shariffuddin and Yusof, Faridah (2016) Hygrothermal performance of building envelopes in the tropics under operative conditions: condensation and mould growth risk appraisal. Jurnal Teknologi, 78 (5). pp. 271-279. ISSN 0127–9696 E-ISSN 2180–3722

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2016) Micromachining. In: Comprehensive materials finishing. Elsevier, pp. 322-343. ISBN 9780128032497

Ali, Mohammad Yeakub and Suieb, Ali Nurhanim and Mohamad Asharaf, Asfana Banu (2016) Micro electro discharge machining of non-conductive ceramic using conductive powder mix dielectric fluid. Journal of Engineering and Applied Sciences, 11 (7). pp. 1469-1474. ISSN 1816-949X E-ISSN 1818-7803

Alias, Aminah and Mohamed Azmin, Nor Fadhillah and Amid, Azura and Ibrahim, Siti Noorjannah (2016) A review-implementations of hyperspectral images technology for food safety and quality. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Alkharasani, Batool Abdulsamad and Hassan, Mohd Khair and Akmeliawati, Rini and Zafira, Ribhan (2016) PID-sliding surface based sliding mode controller for anti-lock braking system of electric vehicle. Advanced Science Letters, 22 (10). pp. 2734-2737. ISSN 1936-6612 E-ISSN 1936-7317

Altaf, Alamaan and Thong, Tanboon and Omar, Ashraf Ali and Asrar, Waqar (2016) Influence of a reverse delta-type add-on device on wake vortex alleviation. AIAA Journal, 54 (2). pp. 625-636. ISSN 0001-1452 E-ISSN 1533-385X

Amir, Ahmed and Htike@Muhammad Yusof, Zaw Zaw (2016) Smart prayer mat. In: Engineering Research with Ethics and Values. Centre for Islamisation (CENTRIS). (In Press)

Anuar, Hazleen and Razali, Mohd Syafiq and Saidin, Hafizul Adzim and Badrul Hisham, Ammelia Fazlina and Mohd Apandi, Siti Nur E’zzati and Ali, Fathilah (2016) Tensile properties of durian skin fibre reinforced plasticized polylactic acid biocomposites. International Journal of Materials and Manufacture [IJEMM], 1 (1). pp. 16-20. E-ISSN 0128-1852

Arshad, Atika and Khan, Sheroz and Alam, A.H.M Zahirul and Tasnim, Rumana and Gunawan, Teddy Surya and Ahmad, Robiah and Nataraj, Chandrasekharan (2016) An activity monitoring system for senior citizens living independently using capacitive sensing technique. In: Conference Record - IEEE Instrumentation and Measurement Technology Conference, 23-26 May 2016, Taipei International Convention CenterTaipei; Taiwan.

Arshad, Atika and Khan, Sheroz and Zahirul Alam, A. H. M. and Tasnim, Rumana (2016) Non-intrusive monitoring of everyday behavioral activities in an indoor environment. Journal of Electronic Science and Technology, 14 (3). pp. 205-210. ISSN 1674-862X

Arshad, Atika and Tasnim, Rumana and Alam, A.H.M Zahirul and Khan, Sheroz (2016) Capacitance-to-voltage converter design to measure small change in capacitance produced by human body movement. In: IEEE International WIE Conference on Electrical and Computer Engineering, WIECON-ECE 2015, 19-20 Dec. 2015, Bangladesh University of Engineering and Technology (BUET)Dhaka.

Arshad, Atika and Tasnim, Rumana and Zahirul Alam, A. H. M. and Khan, Sheroz (2016) Low value capacitance measurement system for the application of monitoring human body. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 327-330. ISSN 1819-6608

Ascroft, Helen and Barnes, Stuart and Dahnel, Aishah Najiah and Gupta, Aniruddha and Abd Halim, Nor Farah Huda and Ray, David (2016) Ultrasonic assisted machining. In: The 17th International Conference on Machine Design and Production, 12th - 15th July 2016, Bursa, Turkiye.

Azam, Huda and Nik Hashim, Nik Nur Wahidah and Sediono, Wahju and Mukhtar, Firdaus and Ibrahim, Normala and Syed Mokhtar, Syarifah Suziah and Abdul Aziz, Salina (2016) Classifications of clinical depression detection using acoustic measures in Malay speakers. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), 04 Dec - 08 Dec 2016, Hotel Pullman Kuala Lumpur.

Azami, Muhammad Hanafi and Savill, Mark (2016) Comparative analysis of alternative fuels in detonation combustion. In: 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 25th-27th July 2016, Salt Lake City, Utah, US.

Azami, Muhammad Hanafi and Savill, Mark (2016) Modelling of spray evaporation and penetration for alternative fuels. Fuel, 180. pp. 514-520. ISSN 0016-2361

B

Basahel, Ahmed and Islam, Md. Rafiqul and Ahmad Zabidi, Suriza and Habaebi, Mohamed Hadi (2016) Availability analysis of free-space-optical links based on rain rate and visibility statistics from tropical a climate. Optik - International Journal for Light and Electron Optics, 127 (22). pp. 10316-10321. E-ISSN 0030-4026

Basri, Atikah Balqis and Ismail, Ahmad Fadzil and Badron, Khairayu and Khairolanuar, Muhamad Haziq and Mohd Sobli, Nuurul Hudaa (2016) Analyses of meteorology information during Malaysian flood disaster 2014. Advanced Science Letters, 22 (10). pp. 2814-2816. ISSN 1936-6612

Basri, Atikah Balqis and Ismail, Ahmad Fadzil and Khairolanuar, Muhamad Haziq and Mohd Sobli, Nuurul Hudaa and Badron, Khairayu and Hasan, Mohammad Kamrul (2016) Analyses of cloud characteristic during Malaysian 2014 flood event. Indian Journal of Science and Technology, 9 (25). 94834-1-94834-8. ISSN 0974-6846 E-ISSN 0974-5645

Bekbaev, Ural (2016) On a classification of finite dimensional algebras with respect to the orthogonal (unitary) changes of basis. In: International Conference ”Algebra, Analysis and Quantum Probability”, 10th-12th September 2015, Tashkent, Uzbekistan.

Bellag, Oualid Abdelkader and Ben Belgacem, Farah Fadwa and Noor Batcha, Ibrahim Ali and Mohd Salleh, Hamzah (2016) Screening of β-glucoside kinase directed evolution library to form a sulfur-phosphorus bond. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Benkara, Souaad and Mahmud, Manzar and Ab Rahim, Rosminazuin and Hasbullah, Nurul Fadzlin and Sabri, Sharizal Fadlie (2016) Radiation characteristics and SEU rates in NEqO environment using SPENVIS. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016), 25th-27th July 2016, Kuala Lumpur.

Bopi, Nor Bazilah and Ismail, Ahmad Fadzil and A. Zabidi, Suriza and Hasan, Mohammad Kamrul (2016) Development of a river basin monitoring system for Malaysia. International Journal of u- and e- Service, Science and Technology, 9 (7). pp. 349-360. ISSN 2005-4246 E-ISSN 2207-9718

Bopi, Nor Bazilah and Ismail, Ahmad Fadzil and Ahmad Zabidi, Suriza and Hasan, Mohammad Kamrul (2016) Development of a rainfall rate monitoring system for Malaysia. Indian Journal of Science and Technology, 9 (28). pp. 1-8. ISSN 0974-6846 E-ISSN 0974-5645

C

Che Noh, Che Hafizah and Mohamed Azmin, Nor Fadhillah and Amid, Azura and Asnawi, Ani Liza (2016) Application of multivariate data analysis for rapid identification of flavonoids classes. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Chowdhury, Silvia and Yusof, Faridah and Wan Salim, Wan Wardatul Amani and Sulaiman, Nadzril and Faruck, Mohammad Omer (2016) An overview of drug delivery vehicles for cancer treatment: Nanocarriers and nanoparticles including photovoltaic nanoparticles. Journal of Photochemistry & Photobiology, B: Biology (164). pp. 151-159. ISSN 1011-1344

Chowdhury, Silvia and Yusof, Faridah and Sulaiman, Nadzril and Faruck, Mohammad Omer (2016) Effect of some parameters in the synthesis of silver nanoparticles and its evaluation as antimicrobes. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Chowdhury, Silvia and Yusof, Faridah and Sulaiman, Nadzril and Faruck, Mohammad Oamylasemer (2016) Anticancer peptides derived from Supermeal worm, Zophobas morio. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Chowdhury, Silvia and Yusof, Faridah and Sulaiman, Nadzril and Faruck, Mohammad Omer and Sidek , Shahrul Naim (2016) Modelling and optimization of process parameters for silver nanoparticles synthesis: A comparison between response surface methodology and artificial neural network. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

D

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2016) The effect of varying cutting speeds on tool wear during conventional and Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC) and titanium alloy stacks. In: 7th CIRP Conference on High Performance Cutting, HPC 2016, 31st May-2nd June 2016, Chemnitz; Germany.

E

Elgharbawy, Amal A.M. and Alam, Md Zahangir and Moniruzzaman, Muhammad and Goto, Masahiro (2016) Ionic liquid pretreatment as emerging approaches for enhanced enzymatic hydrolysis of lignocellulosic biomass. Biochemical Engineering Journal, 109. pp. 252-267. ISSN 1369-703X E-ISSN 1873-295X

Eltahir, Amal A. and Saeed, Rashid Abdelhaleem and Mukherjee, Amitava and Hasan, Mohammad Kamrul (2016) Evaluation and analysis of an enhanced hybrid wireless mesh protocol for vehicular adhoc network. Eurasip Journal on Wireless Communications and Networking, 2016 (1). pp. 169-1. ISSN 1687-1472 E-ISSN 1687-1499

Eshteyah, Mohanna and Hrairi, Meftah and Mohiuddin, A. K. M. (2016) Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology, 82 (1-4). pp. 179-195. ISSN 0268-3768 E-ISSN 1433-3015

F

Farhana, Soheli and Alam, A.H.M Zahirul (2016) Development of high frequency 14 nm CNTFET model. Materials Today: Proceedings, 3 (2). pp. 258-264. ISSN 22147853 E-ISSN 2214-7853

Faris, Waleed Fekry (2016) al-Tarbiyah wa-al-murabbi al-qira'ah fi hayah Sa'id al-Nursi wa-Rasa'il al-Nur. |bal-Jami'ah al-Islamiyah al-'Alamiyah,|c2016, Kuala Lumpur. ISBN 9789839470970

Faruck, Mohammad Omer and Yusof, Faridah and Chowdhury, Silvia (2016) An approach to optimize process parameter for peptides extraction from Zophobas morio (Fabricius) using antifungal activity as the response. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Faruck, Mohammad Omer and Yusof, Faridah and Chowdhury , Silvia (2016) Effect of some parameters on the extraction process of antifungal peptides from Supermeal worm, Zophobas morio (Fabricius). In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Funke Olanrewaju, Rashidah and Fajingbesi, Fawwaz Eniola and Mahmoud, Shaibo Mohammed M (2016) Automated bank note identification system for visually impaired subjects in Malaysia. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016), 25th-27th July 2016, Kuala Lumpur.

G

Ganiev, Inomjon (2016) Convergence of Martingales in Orlicz–Kantorovich Lattice. In: The 3rd International Conference on Mathematical Applications in Engineering 2014 (ICMAE’14), 23-25 September 2014, Kuala Lumpur, Malaysia.

H

Hablee, Sufiamie and Razali, Nurul Nadirah and Alqap, Asep Sofwan Faturohman and Sopyan, Iis (2016) Recent developments on injectable calcium phosphate bone cement. Recent Patents on Materials Science, 9 (2). pp. 72-94. ISSN 1874-4648 E-ISSN 1874-4656

Hafiz, Fadhlan Kamaru Zaman and Shafie, Amir Akramin and Mohd. Mustafah, Yasir (2016) Robust face recognition against expressions and partial occlusions. International Journal of Automation and Computing, 13 (4). pp. 319-337. ISSN 1476-8186

Haja Mohideen, Ahmad Jazlan and Sreeram, Victor and Shaker, Hamid Reza and Togneri, Roberto (2016) Frequency interval balanced truncation of discrete time bilinear systems. Cogent Engineering, 3 (1). pp. 1203082-1. ISSN 2331-1916

Haja Mohideen, Ahmad Jazlan and Sreeram, Victor and Shaker, Hamid Reza and Togneri, Roberto and Minh, Ha Binh (2016) Frequency interval cross gramians for linear and bilinear systems. Asian Journal of Control, 19 (1). pp. 22-34. ISSN 1561-8625 E-ISSN 1934-6093

Hamidon, R. and Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohammad Yuhan (2016) Influence of cutting parameters on cutting force and cutting temperature during pocketing operations. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 453-459. ISSN 1819-6608

Haque, Anwar Ul and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Mohamed Ali, Jaffar Syed (2016) A novel technique to neutralize the Yawing moment due to asymmetric thrust in a hybrid buoyant aircraft. In: 10th International Conference on Experimental Fluid Mechanics, EFM 2015, 17-20 November 2015, Kaserstejn PalacePrague; Czech Republic.

Haque, Anwar Ul and Asrar, Waqar and Sulaeman, Erwin and Mohamed Ali, Jaffar Syed and Omar, Ashraf Ali (2016) A prospective solution For consistent aerostatic lift for a hybrid buoyant aircraft. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8 -10 March 2016, JW Marriott Hotel K LKuala Lumpur.

Harun, Azmi and Che Haron, Che Hassan and A.Ghani, Jaharah and Mokhtar, Suhaily (2016) Study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4761-4766. ISSN 1819-6608

Hassan, Muhammad Hasibul and Mollik, Md Sazib (2016) Crystallization kinetics and thermal behaviors of multi-walled carbon nanotube dispersed jute reinforced composite. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4137-4142. ISSN 1819-6608

Hedzir, Anati Syahirah and Muridan, Norasmahan and Hasbullah, Nurul Fadzlin (2016) A review of leakage current mechanism in nitride based light emitting diode. Malaysian Journal of Fundamental and Applied Sciences, 12 (2). pp. 77-84. ISSN 2289-5981 E-ISSN 2289-599X

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Putra, Azma and Musthafah, Mohd Tahir and Awang, Ardika Ridal (2016) Prediction on Power Produced from Power Turbine as a Waste Heat Recovery Mechanism on Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling and Simulation in Engineering, 2016. 5072404-1-5072404-12. ISSN 1687-5591 E-ISSN 1687-5605

Hoq, S.M. Afzal and Sulaeman, Erwin and Okhunov, Abdurahim (2016) Error analysis of heat conduction partial differential equations using Galerkin’s Finite Element method. Indian Journal of Science and Technology, 9 (36). pp. 1-6. ISSN 0974-6846 E-ISSN 0974-5645

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2016) A comparison study on the harmonic balance method and rational harmonic balance method for the Duffing-harmonic oscillator. Global Journal of Pure and Applied Mathematics, 12 (3). pp. 2721-2732. ISSN 0973-1768 E-ISSN 0973-9750

Hosen, Mdalal and Chowdhury, Md. Sazzad Hossien (2016) Solution of cubic-quintic duffing oscillators using harmonic balance method. Malaysian Journal of Mathematical Sciences, 10. pp. 181-192. ISSN 1823-8343 E-ISSN 2289-750X

Hossain, A. K. M. Zakir and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. (2016) A new approach for generating energy efficient discrete chirp signal of an UWB RFID reader circuit. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016), 13th-15th Dec. 2016, Kuala Terengganu, Terengganu.

Hossain, Abul K M Z and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. (2016) Detection of data from the UWB microstrip resonator type RFID tag. In: 1st International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, ICCNEEE 2015, 7th - 9th September, 2015, Khartoum, Sudan.

Htike@Muhammad Yusof, Zaw Zaw and Nyein Naing, Wai Yan (2016) Fault detection of aircraft engine components using fuzzy unordered rule induction algorithm. In: International Conference on Mechanical, Automotive and Aerospace Engineering, 25-27 Jul 2016, Kuala Lumpur, Malaysia. (Unpublished)

Htike@Muhammad Yusof, Zaw Zaw and Nyein Naing, Wai Yan (2016) Identification of rotation anomaly of fan disks using random forest model. In: International Conference on Mechanical, Automotive and Aerospace Engineering, July 25-27, 2016, Kuala Lumpur, Malaysia. (Unpublished)

Husman, Muhammad Afif and Maqbool, H. F. and Awad, M. I. and Abouhossein, Alireza and Dehghani-Sanij, A. A. (2016) A wearable skin stretch haptic feedback device: towards improving balance control in lower limb amputees. In: Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 16th-20th August 2016, Orlando, Florida, USA.

I

Ibrahim, Saerahany Legori and Ariffin, Junaidah and Abdullah, Jazuri and Muhamad, Noor Safwan (2016) Jet Erosion Device (JEd) – measurement of soil erodibility coefficients. Jurnal Teknologi, 78 (5-5). pp. 63-67. E-ISSN 2180-3722

Islam, Shayla and Hassan Abdalla Hashim, Aisha and Habaebi, Mohamed Hadi and Abdullah, Azween and Hasan, Mohammad Kamrul (2016) A numerical evaluation on multi-interfaced fast handoff scheme: impact of rising link switching delay for a high speed car. Advanced Science Letters, 22 (10). pp. 2804-2808. ISSN 1936-6612 (In Press)

Islam, Shayla and Hassan Abdalla Hashim, Aisha and Habaebi, Mohamed Hadi and Hasan, Mohammad Kamrul (2016) Handoff performance analysis for multihoming-based network mobility scheme. International Journal of Smart Home, 10 (5). pp. 339-346. ISSN 1975-4094

Ismail, Ahmad Fadzil (2016) Empirical conversion of rainfall rate distribution for various integration time in Malaysia. Research Report. IIUM Press, Kuala Lumpur. (Unpublished)

J

J.N, Nor Hasnidawani and Hassan, Noor Azlina and Hassan, Norita and Bonnia, Noor Najmi and Ratim, Suzana and E. S., Ali (2016) Synthesis of ZnO nanostructures using sol-gel method. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), 4th-6th August 2015, Penang, Malaysia.

Jakpar, Muhamad Jamil and Za’bah, Nor Farahidah and Ismail, Ahmad Fadzil and Hasan, Mohammad Kamrul (2016) Exploitation of radio direction finder in the design of a UHF transmitter locator system. Indian Journal of Science and Technology, 9 (25). pp. 89622-1. ISSN 0974-6846 E-ISSN 0974-5645

Jamal, Parveen and Azmi, Saiful Mohammad Nizam and Amid, Azura (2016) Extraction and isolation of xanthine oxidase inhibitors from carica papaya leave extract using chromatographic techniques. In: Experimental methods in modern biotechnology. IIUM Press Series of Textbook from the Islamic Perspectives, 2 . IIUM Press, Kuala Lumpur, pp. 25-35. ISBN 978-967-418-384-4

Jami, Mohammed Saedi and Fazil, Nurul Alia and Iwata, Masashi (2016) Optimum conditions for immobilization of fat, oil and grease (fog) by Calcium alginate. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Jaswir, Irwandi and Mirghani, Mohamed Elwathig Saeed and Mohd. Salleh, Hamzah and Ramli, Noriah and Octavianti, Fitri and Hendri, Ridar (2016) An overview of the current analytical methods for halal testing. In: Contemporary Issues and Development in the Global Halal Industry Part II. Springer, Singapore, pp. 291-300. ISBN 978-981-10-1450-5

Jaswir, Irwandi and Octavianti, Fitri and Lestari, Widya and Hendri, Ridar (2016) Analysis of TaeCheongsu natural water from Baegunsan Mountain, Korea. International Journal of Biotechnology and Bioengineering, 1 (1,02). pp. 14-19. ISSN 2231-1238

Jaswir, Irwandi and Ramli, Noriah (2016) Study on Muslim-friendly hospitality in Malaysia. In: Contemporary Issues and Development in the Global Halal Industry Part I. Springer, Singapore, pp. 59-66. ISBN 978-981-10-1450-5

Jemain, Siti Fathimah Putery and Jamal, Parveen and Ahmad Raus, Raha and Amid, Azura and Jaswir , Irwandi (2016) Effects of process conditions on the ultrasonic extraction of phenolics scavenger from Curcuma caesia rhizome. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

K

Kabbashi, Nassereldeen Ahmed and Alam, Md Zahangir and Elgharbawy, Amal A.M. and Moniruzzaman, Muhammad and Jamal, Parveen (2016) Evaluation of several ionic liquids for in situ hydrolysis of empty fruit bunches by locally-produced cellulase. 3 Biotech, 6 (2). pp. 1-15. ISSN 2190-572X E-ISSN 2190-5738

Khalaf, Ayesheh Ahrari and Hassan Abdalla Hashim, Aisha (2016) Analysis of cost minimization methods in geo-distributed data centers. In: 2016 International Conference on Computer & Communication Engineering ICCCE 2016, 25th-27th July 2016, Kuala Lumpur.

Khalifa, Othman Omran and Fadlallah, Fadlallah Ali and Hassan Abdalla Hashim, Aisha (2016) طريقة حديثة لدفق ملفات الفيديو اعتمادا علي تقنية تخطي وبناء الاطر. In: 10th International Conference on Computing in Arabic, Khartoum Sudan. (Unpublished)

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) A critical assessment of prevailing models for measuring lean manufacturing. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Khan, Khan Bahadarkhan and Abdul Khaliq, Amir and Print | Email Scopus - Author details - Shahid, Muhammad Usman and Khan, Sheroz (2016) An efficient technique for retinal vessel segmentation and denoising using modified isodata and CLAHE. IIUM Engineering Journal, 17 (2). pp. 31-46. ISSN 1511-788X

Khan, Masood and Rahman, Masood Ur and Mohammad, Azram (2016) A note on exact solution for thermal radiative flow over a stretching/shrinking sheet with convective boundary condition. Walailak Journal of Science and Technology, 13 (5). pp. 355-364. ISSN 1686-3933 E-ISSN 2228-835X

L

Li, Jingguo and Nasaruddin, Ricca Rahman and Feng, Yan and Yang, Jun and Yan, Ning and Xie, Jianping (2016) Tuning the accessibility and activity of Au25(SR)18 nanocluster catalysts through ligand engineering. Chemistry A European Journal, 22. pp. 14816-14820. ISSN 0947-6539 E-ISSN 1521-3765

Lutpi, Husniyah Aliyah and Anuar, Hazleen and Mohamed, Mohd Ambri and Mohd. Salit, Sapuan (2016) Potential of irradiated high density polyethylene/ethylene propylene rubber-carbon nanotube nanocomposite as shoe sole. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 230 (2). pp. 100-110. ISSN 1754-3371

M

Mahmod, Zainab Senan and Hassan Abdalla Hashim, Aisha and Hameed, Shihab A. and Anwar, Farhat and Hassan, Wan Haslina (2016) The Directional Hierarchical AODV (DH-AODV) routing protocol for wireless mesh networks. In: 2015 International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering (ICCCNEE 2015), 7th-9th Dec. 2015, Khartoum, Sudan.

Mahmoud Ahmed, Gharib Subhi and Hassan, Taher and Othman, Rashidi and Messikh Azeddine, Azeddine (2016) Simulation of absorption spectrum of photosynthetic pigments of chlorella vulgaris B algae. Malaysian Journal of Mathematical Sciences, Volume 10 (S) (Special Issue- Part I). pp. 123-130. ISSN 1823-8343 E-ISSN 2289-750X

Mahmoud Ahmed, Gharib Subhi and Messikh Azeddine, Azeddine (2016) Simple quantum circuit for pattern recognition based on nearest mean classifier. International Journal On Perceptive and Cognitive Computing, 2 (2). pp. 17-24. ISSN 2462 - 229X

Mahmoud Ahmed, Gharib Subhi and Messikh Azeddine, Azeddine and Hassan, Taher (2016) Evolution of the two-mode entangled states with an atomic coupler. In: The 3rd International Conference on Mathematical Applications in Engineering 2014 (ICMAE’14), 23rd-25th September 2014, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul (2016) Erosion corrosion and tribological behavior of TIG torch composite layers. Project Report. Research Management Centre, International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Ani, Mohd Hanafi and Samat, Noorasikin and Ahmed, Abu Saleh and Rahman, Md Mustafizur (2016) Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)

Mansor, Mariatul Fadzillah and Md Jahim, Jamaliah and Mumtaz, Tabassum and Abd Rahman, Rakmi and Abd Mutalib, Sahilah (2016) Development of a methane-free, continuous biohydrogen production system from palm oil mill effluent (Pome) in cstr. Journal of Engineering Science and Technology, 11 (8). pp. 1174-1182. ISSN 1823-4690

Marcel, Soropogui Keamou and Jameel, Ahmed Tariq (2016) Enzyme based biosensorsb for pesticides detection. In: International Conference Biotechnology Engineering, ICBioE ‘16 July 25-27, 2016, Kuala Lumpur, Malaysia, July 25-27, 2016, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.

Messikh Azeddine, Azeddine and Mahmoud Ahmed, Gharib Subhi and Umarov, Bakhram A. and Wahiddin, Mohamed Ridza (2016) Atomic coupler with two-mode squeezed vacuum state. Malaysian Journal of Mathematical Sciences, 10. pp. 103-110. E-ISSN 1823-8343

Miqdad, A. and Kadir, Kushsairy and Ahmed, Syed Faiz and Janin, Zuriati and Khan, Sheroz (2016) Space cooling load monitoring system with IoT. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Mohammed Nadzr, Nur Izzati and Sulaimi, Mariana and Umadi, Lina Fadhilah and Sidek, Khairul Azami (2016) Photoplethysmogram based biometric recognition for twins. Indian Journal of Science and Technology, 9 (36). pp. 1-9. ISSN 0974-6846 E-ISSN 0974-5645

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Abdullah, Azween and Mohd. Ramli, Huda Adibah (2016) Multicast support in network based mobility management: Current challenges and solutions. Advanced Science Letters, 22 (10). pp. 2794-2798. ISSN 1936-6612 E-ISSN 1936-7317

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Abdullah, Azween and Mohd. Ramli, Huda Adibah and Islam, Shayla (2016) Evaluation of an enhanced multicast data flow technique in network mobility. International Journal of Future Generation Communication and Networking, 9 (7). pp. 153-164. ISSN 2233-7857

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Abdullah, Azween and Mohd. Ramli, Huda Adibah and Islam, Shayla (2016) Parametric comparison of multicast support for network mobility management: A qualitative analysis. International Journal of Multimedia and Ubiquitous Engineering, 11 (9). pp. 203-210. ISSN 1975-0080

Mohd Hatta, Maziati Akmal and Abd Rashid, Mohd Warikh M. and Azlan, Umar Al Amani and Azam, Mohd Asyadi and Anand, T. Joseph Sahaya and Moriga, Toshihiro (2016) Structural evolution and dopant occupancy preference of yttrium-doped potassium sodium niobate thin films. Journal of Electroceramics, 37 (1-4). pp. 50-57. ISSN 1385-3449 E-ISSN 1573-8663

Mohd Hatta, Maziati Akmal and Abd Rashid, Mohd Warikh M. and Azlan, Umar Al Amani and Azmi, Nurul Azuwa and Azam, Mohd Asyadi and Moriga, Toshihiro (2016) Influence of yttrium dopant on the structure and electrical conductivity of potassium sodium niobate thin films. Materials Research, 19 (6). pp. 1417-1422. ISSN 1516-1439 E-ISSN 1980-5373

Mohd Ibrahim, Azhar and Venkat, Ibrahim and Subramaniam, K.G. and Khader, Ahamad Tajudin and De Wilde, Philippe (2016) Intelligent evacuation management systems: A review. ACM Transactions on Intelligent Systems and Technology, 7 (3). 36-36:27. ISSN 2157-6904 E-ISSN 2157-6912

Mohd Ismail, Kamsiah and Radin Salim, Kamilah and Haron, Habibah Norehan and Abd Rahman, Rozita Juliana and Hussain, Noor Hamizah and Ali, Rosmah and Abdullah, Morina and Mohamed Nor, Norhayati and Mohamed, Zainai and Mulop, Normah (2016) Laboratory facilities for engineering technology programs in Malaysian technical universities. In: "6th International Conference on Engineering Education 2016", 9-10 August 2016, Kuala Lumpur, Malaysia.

Mohd Sobli, Nuurul Hudaa and Ismail, Ahmad Fadzil and Asnawi, Ani Liza and Wan Nordin, Mimi Aminah and Khairolanuar, Muhamad Haziq (2016) Assessment of statistical and empirical conversion methods of integration time for rainfall rate in Malaysia. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 201, 9-11 June 2015, Phuket; Thailand.

Mohd Suhaimi, Nur Farahana and Htike@Muhammad Yusof, Zaw Zaw (2016) Machine learning in fMRI classification. In: Neuroinformatics 2016, 3rd-4th September 2016, Reading, United Kingdom.

Mohd. Yusoff, Marmeezee and Mamat, M.H. and Malek, Mohd Firdaus and Abu Bakar, Suriani and Mohamed, Azmi and Ahmad, Mohd Khairul and Alrokayan, Salman A.H. and Khan, Haseeb Ahmad and Rusop, Mohamad (2016) Growth of titanium dioxide nanorod arrays through the aqueous chemical route under a novel and facile low-cost method. Materials Letters, 164. pp. 294-298. ISSN 0167-577X

Mostafa, Mohammad Golam and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Rahman, Towfikur (2016) Development of piezoelectric micro-energy harvesting system using voltage doubler. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 351-355. ISSN 1819-6608

Mustaffa, Nooraidah and Jamal, Parveen and Saheed, Olorunnisola Kola and Kabashi, Nassereldeen A. and Ali, Fathilah and Othman, Rashidi and Redzwan, Ghufran (2016) Bioremediation of polycyclic aromatic hydrocarbons by bacterial strains isolated from petroleum contaminated soil. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

N

Najeeb, Athaur Rahman and Salami, Momoh Jimoh Emiyoka and Gunawan, Teddy Surya and Aibinu, Abiodun Musa (2016) Review of parameter estimation techniques for time-varying autoregressive models of biomedical signals. International Journal of Signal Processing Systems, 4 (3). pp. 220-225. ISSN 2315-4535

Nasaruddin, Ricca Rahman and Alam, Md Zahangir and Jami, Mohammed Saedi and Salihu, Aliyu (2016) Statistical optimization of ethanol-based biodiesel production from sludge palm oil using locally produced candida cylindracea lipase. Waste and Biomass Valorization, 7 (1). pp. 87-95. ISSN 1877-2641

Noorbatcha, Ibrahim Ali and Samsudin, Nurhusna and Mohd. Salleh, Hamzah and Idid, Syed Zahir (2016) Quantum chemical structure activity studies of anticancer activity of seconucleoside nitrosourea analogs. Chemical Informatics, 2 (1). pp. 1-7. E-ISSN 2470-6973

O

Ogu Salim, Nurhainis and Ahmad Fuad, Fazia Adyani (2016) Cloning and characterisation of Lactate Dehydrogenase Gene from Plasmodium knowlesi in bacterial system. In: Borneo Biotech Symposium, 7- 8 December 2016, Kota Kinabalu, Sabah. (Unpublished)

Oladokun, Majeed and Ali, Maisarah and Osman, Samsul Bahrin and Samsuddin, Niza and Hamzah, Hairul Aini (2016) Experimental investigation of ventilation efficiency in a dentistry surgical room. In: The 4th International Building Control Conference 2016 (IBCC 2016), 7th-8th March 2016, Kuala Lumpur.

Olanrewaju, Rashidah Funke and Khan, Burhan Ul Islam and Mir, Roohie Naaz and Baba, Asifa Mehraj and Anwar, Farhat (2016) DFAM: A distributed feedback analysis mechanism for knowledge based educational big data. Jurnal Teknologi, 78 (12-3). pp. 31-38. E-ISSN 2180-3722

Olanrewaju, Rashidah Funke and Khan, Burhan ul Islam and Anwar, Farhat and Khan, Abdul Raouf and Ahmed Shaikh, Faraz and Mir, Mohammad Shuaib (2016) MANET – A cogitation of its design and security issues. Middle-East Journal of Scientific Research, 24 (10). pp. 3094-3107. ISSN 1990-9233

Olanrewaju, Rashidah Funke and Khan, Burhan ul Islam and Baba, Asifa Mehraj and Mir, Roohie Naaz and Lone, Sajaad Ahmad (2016) RFDA: Reliable framework for data administration based on split-merge policy. In: 2016 SAI Computing Conference (SAI), 13th-15th July 2016, ExCeL London (CentrEd Conference Center), One Western Gateway, Royal Victoria DockLondon; United Kingdom.

Omar, Muhammad Nor and Abu Bakar, Ibrahim and Nordin, Noor Faizul Hadry (2016) Biotransformation of artemisinin and asiaticoside: Malaysian tropical plant phytochemicals. Research Report. UNSPECIFIED. (Unpublished)

Opeyemi Roheem, Fatimah and Mat So'ad, Siti Zaiton and Ahmed, Qamar Uddin and Jamal, Parveen and Mohd Hassan, Norazian (2016) Phytochemical profile and free radical scavenging activity of Entada spiralis stem bark. In: 2nd International Conference on Industrial Pharmacy (ICIP 2016):Generics and Biosimilars, 15th-16th Aug. 2016, Kuantan, Pahang. (Unpublished)

R

Rafiq, Hashum M. and Siddiqi, Mohammad Umar (2016) The Haar-Recursive transform and its consequence to the Walsh-paley spectrum and the autocorrelation function. International Journal of Engineering Research and Application ( IJERA ), 6 (11). pp. 46-58. ISSN 2248-9622

Rahman, Mohammed Ataur and Rafia, Afroz (2016) Lithium battery recycling management and policy. International Journal of Energy Technology and Policy, 13 (3). pp. 278-291. ISSN 1741-508X E-ISSN 1472-8923

Rahman, Tawfikur and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn (2016) Design and simulation of a PWM based phase synchronous inverter for utility grid systems with 20km feeder line. In: 3rd International Conference on Science and Social Research (CSSR 2016), 6th-7th December 2016, Putrajaya, Malaysia. (Unpublished)

Rahman, Towfikur and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Mostafa, Mohammad Golam (2016) Simulation and evaluation of a phase synchronous inverter for micro-grid system. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 356-361. ISSN 1819-6608

Rasli, Mohamad Dzulfiqar and Mohd Nor, Muhammad Zaki Mukhtar and Sorooshian , Shahryar and Tan, Seng Teck and Ismail, Md Yusof (2016) How productivity can be affected by human capital. International Journal of Engineering Applied Sciences and Technology, 1 (6). pp. 29-32. ISSN 2455-2143

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2016) Classification of miRNA expression data using random forests for cancer diagnosis. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016), 25th-27th July 2016, Kuala Lumpur.

Reed, Alan and Bucci, Giovanna and Abd-Wahab, Firdaus and Tucker, Stephen J. (2016) Dominant-negative effect of a missense variant in the TASK-2 (KCNK5) K+ channel associated with Balkan endemic nephropathy. PLOS One, 11 (5). pp. 1-12. ISSN 1932-6203

Rejab, Nik Akmar and Ahmad Azhar, Ahmad Zahirani and Ratnam, Mani Maran (2016) Role of MgO nanoparticles on zirconia-toughened alumina-5 wt-% CeO2 ceramics mechanical properties. Materials Science and Technology, 32 (13). pp. 1316-1322. ISSN 0267-0836 E-ISSN 1743-2847

S

Saifuddin, Syala and Hassan Abdalla Hashim, Aisha and Abdullah, Azween and Hasan, Mohammad Kamrul (2016) A numerical framework for the analysis of handoff delay component in proxy NEMO environment. International Journal of Future Generation of Communication and Networking, 9 (8). pp. 45-54. ISSN 2233-7857

Sethuraman, Vigneshvaran and Khan, Sher Afghan (2016) Effect of sudden expansion for varied area ratios at subsonic and sonic flow regimes. International Journal of Energy, Environment, and Economics, 24 (1). pp. 99-111. ISSN 1054-853X

Shasthri, Sivaguru and Kausalyah, Venkatason and Shah, Qasim Hussain and MahmoudIdres, Moumen Mohamed and Wong, S. V. (2016) A parametric study of neck moment response in a 3 year old child subjected to oblique side impact. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5126-5133. ISSN 1819-6608

Shumani, Mohamed M. and Abdullah, Mohammad Faiz Liew and Ahmad Zabidi, Suriza (2016) The effect of haze attenuation on Free Space Optics Communication (FSO) at two wavelengths under Malaysia weather. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016), 25th-27th July 2016, Kuala Lumpur.

Suazlan, Mt Aznam and Shoji, Mori and Kunito, Okuyama (2016) Critical heat flux enhancement in water-based nanofluid with honeycomb porous plate on large heated surface. In: 24th International Conference on Nuclear Engineering, 26th–30th June 2016, Charlotte, North Carolina, USA,.

Sukindar, Nor Aiman (2016) Material structure and bonding. In: Material Science. Politeknik Kuching Sarawak, pp. 13-33. ISBN 978-967-0797-36-6

Sukindar, Nor Aiman and Ariffïn, M.K.A. and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing. Jurnal Teknologi, 78 (10). pp. 7-15. E-ISSN 2180–3722

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar (2016) An analysis on finding the optimum die angle of polylactic acid in fused deposition modelling. In: 2nd International Conference on Advanced Engineering and Technology (ICAET 2015), 11th-13th December 2015, Incheon, South Korea.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Comparison on dimensional accuracy using a newly developed nozzle for open-source 3D printer. In: 6 th edition of the International Conference on Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering, Biomechatornics and Neurorehabilitation, 4th-6th November 2016, Bucharest, Romania.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Evaluation on the process parameters influencing the surface texture using open-source 3D printing. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28th-30th August 2016, Putrajaya.

Surip, S.N. Surip and Wan Jaafar, W.N.R. and Azmi, N.N. and Hassan, Noor Azlina (2016) Biodegradation properties of poly (Lactic) acid reinforced by kenaf fibers. ACTA PHYSICA POLONICA A, 129. pp. 835-837. ISSN 0587-4246 E-ISSN 1898-794X

T

Tahoun, Ahmed and Kafafy, Raed and Jawamir, Karam and Mohammed Aldheeb, Mohammed Abdulmalek and Khalil, Abdul Mushawwir (2016) Method and apparatus for remotely changing flow profile in conduit and drilling bit. US9309726B2.

Tahoun, Ahmed and Kafafy, Raed and Jawamir, Karam and Mohammed Aldheeb, Mohammed Abdulmalek and Khalil, Abdul Mushawwir (2016) apparatus and method to remotely control fluid flow in tubular strings and wellbore annulus. US9453388B2.

Taib, Taifunisyam and Mohamad, Souad A. and Johan, Mohd Rafie and Basirun, Wan Jefrey and Chin, Kim Ming and Chia, Chang Cherng and Tan, Jia Herng (2016) Optical, thermal and dielectric studies of silver silica nanoparticles synthesized via sol gel technique. In: 28th Regional Conference on Solid State Science Technology 2014 (RCSSST 2014), 25th – 27th November 2014, Cameron Highlands, Pahang.

Tajuddin, Maisarah and Ahmad, Zuraida and Ismail, H. (2016) A review of natural fibers and processing operations for the production of binderless boards. BioResources, 11 (2). pp. 5600-5617. ISSN 1930-2126

U

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Rubaiyat, M and Hossain, Belayet and Salam, S M and Nithe, N A (2016) Comparison of position sensorless control based back-EMF estimators in PMSM. In: 2015 18th International Conference on Computer and Information Technology (ICCIT), 21st-23rd December 2015, Dhaka, Bangladesh.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2016) Comparison of data correction methods for blockage effects in semispan wing model testing. In: "10th International Conference on Experimental Fluid Mechanics, EFM 2015", 17-20 November 2015, Kaserstejn PalacePrague; Czech Republic.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2016) Wind tunnel testing on a generic model of a hybrid lifting hull. Journal of Aerospace Technology and Management, 8 (4). pp. 467-474. ISSN 1984-9648 E-ISSN 2175-9146

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2016) Effect of side wind on the directional stability and aerodynamics of a hybrid buoyant aircraft. In: 2015 International Conference on Mechanical Engineering and Electrical Systems (ICMES 2015), 16th-18th December 2015, Singapore.

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2016) Effect of wing loading on gross takeoff mass of a hybrid buoyant aircraft. International Journal of Unmanned Systems Engineering, 4 (1). pp. 11-22. ISSN 2052-112X

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Mohamed Ali, Jaffar Syed (2016) Framework of conceptual design methodology for hybrid buoyant aircraft. Aerotecnica Missili & Spazio = The Journal of Aerospace Science, Technology and Systems, 95 (2 (April-June)). pp. 99-110.

W

Wan Abdul Rahman, Wan Fariza and Islam, Md. Rafiqul and Hassan Abdalla Hashim, Aisha (2016) Delay contributing factors and strategies towards its minimization in IoT. Journal of Telecommunication, Electronic and Computer Engineering, 8 (3). pp. 149-153. ISSN 2180-1843 E-ISSN 2289-8131

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Ngadi, Norzita and Abdullah, Mohd Ezree and Mohamed, Abdullahi Ali (2016) A review on application of waste cooking oil as rejuvenator in porous asphalt mixture. Jurnal Teknologi, 78 (4). pp. 105-109. E-ISSN 2180–3722

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Ngadi, Norzita and Al Bakri Abdullah, Mohd Mustafa (2016) Effect of antioxidant characteristic from waste cooking oil in modified asphalt binder. Key Engineering Materials, 700. pp. 197-206. ISSN 1662-9795

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Ngadi, Norzita and Al Bakri Abdullah, Mohd Mustafa (2016) Performance of waste cooking oil in asphalt binder modification. Key Engineering Materials, 700. pp. 216-226. ISSN 1662-9795

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Ngadi, Norzita and Mohamad, Mardhiah (2016) Chemical identification of waste cooking oil as additive in Bitumen. Key Engineering Materials, 700. pp. 207-215. ISSN 1662-9795

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putrajaya, Ramadhansyah and Hainin, Mohd Rosli and Mohamed, Azman and Ngadi, Norzita and Jayanti, Dewi Sri (2016) The potential of waste cooking oil as bio-asphalt for alternative binder – An overview. Jurnal Teknologi, 78 (4). pp. 111-116. E-ISSN 2180–3722 |

Wan Azahar, Wan Nur Aifa and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Bujang, Mastura and Ngadi, Norzita (2016) Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder. Construction and Building Materials, 126. pp. 218-226. ISSN 0950-0618

Y

Yaccop, Afham Abd Hakim and Yao, Yudong and Ismail, Ahmad Fadzil and Badron, Khairayu and Hasan, Mohammad Kamrul (2016) Refining ku-band rain attenuation prediction using local parameters in tropics. Indian Journal of Science and Technology, 9 (25). 97240-1-97240-8. ISSN 0974-6846 E-ISSN 0974-5645

Yaccop, Afham Abd Hakim and Yao, Yudong and Ismail, Ahmad Fadzil and Wan Nordin, Mimi Aminah and Badron, Khairayu (2016) Preliminary analyses on measured received signals of orbiting RazakSAT satellite. Advanced Science Letters, 22 (10). pp. 2790-2793. ISSN 1936-6612 E-ISSN 1936-7317

Yusof, Imran and Pathan, Al Sakib Khan (2016) Mitigating cross-site scripting attacks with a content security Policy. Computer, 49 (3). pp. 56-63. ISSN 0018-9162

Yusop, Nur Syafiqah and Mahmud, Manzar and Nordin, Anis Nurashikin and Hasbullah, Nurul Fadzlin (2016) Effect of single event upset on 6T and 12T 32NM CMOS SRAMs circuit. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016), 13th-15th Dec. 2016, Kuala Terengganu, Terengganu.