IIUM Repository

Items where Author is "Hrairi, Meftah"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 110.

Article

Ganat, Tarek A. and Hrairi, Meftah (2019) Effect of flow patterns on two-phase flow rate in vertical pipes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 150-160. ISSN 2289-7879

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 241-245. ISSN 2277-3878

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Modeling different repair configurations of an aluminum plate with a hole. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 235-240. ISSN 2277-3878

Hrairi, Meftah and Daoud, Jamal Ibrahim and Zakaria, Faiz (2019) Optimization of incremental sheet metal forming process using grey relational analysis. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 246-252. ISSN 2277-3878

Ganat, Tarek A. and Hrairi, Meftah and Belladonna, Maulianda and Eghbal, Motaei (2019) Analytical model for predicting frictional pressure drop in upward vertical two-phase flowing wells. Heat and Mass Transfer. pp. 1-15. ISSN 0947-7411 E-ISSN 1432-1181 (In Press)

Ganat, Tarek A. and Hrairi, Meftah (2018) A new choke correlation to predict flow rate of artificially flowing wells. Journal of Petroleum Science and Engineering, 171. pp. 1378-1389. ISSN 0920-4105

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Experimental and numerical analysis of piezoelectric active repair of edge-cracked plate. Journal of Intelligent Material Systems and Structures, 29 (18). pp. 3656-3666. ISSN 1045-389X E-ISSN 1530-8138

Ganat, Tarek A. and Hrairi, Meftah (2018) Gas–liquid two-phase upward flow through a vertical pipe: influence of pressure drop on the measurement of fluid flow rate. Energies, 11 (11). pp. 1-23. ISSN 1996-1073

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Hrairi, Meftah and Ismail, Ahmad Faris (2018) Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation, 3 (4 (September-October)). pp. 160-186. ISSN 2456-1851

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Evaluating the reduction of stress intensity factor in center-cracked plates using piezoelectric actuators. Actuators, 7 (2). pp. 1-13. ISSN 2076-0825

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2018) Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development, Special issue. pp. 238-243. ISSN 2249-6890 E-ISSN 2249-8001

Aabid, Abdul and Hrairi, Meftah and Mohamed Ali, Jaffar Syed and Abuzaid, Ahmed (2018) Stress concentration analysis of a composite patch on a hole in an isotropic plate. International Journal of Mechanical and Production Engineering Research and Development, 2018 (Special Issue). pp. 249-255. ISSN 2249-6890 E-ISSN 2249-8001

Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. CFD Letters, 10 (2). pp. 18-27. ISSN 2180-1363

Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Masturah, Mohamad (2018) Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 9-17. E-ISSN 0128-1852

Eshteyah, Mohanna Moh'd Saleem and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Numerical investigation of springback in mechanical clinching process. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 86-93. E-ISSN 0128-1852

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Modeling approach to evaluating reduction in stress intensity factor in center-cracked plate with piezoelectric actuator patches. Journal of Intelligent Material Systems and Structures, 28 (10). pp. 1334-1345. ISSN 1045-389X E-ISSN 1530-8138

Djemana, Mohamed and Hrairi, Meftah and Al Jeroudi, Yazan (2017) Using electromechanical impedance and extreme learning machine to detect and locate damage in structures. Journal of Nondestructive Evaluation, 36 (2). pp. 1-10. ISSN 0195-9298 E-ISSN 1573-4862

Djemana, Mohamed and Hrairi, Meftah (2016) Modelling and simulation of impedance-based damage monitoring of structures. International Journal of Simulation Modelling, 15 (3). pp. 395-408. E-ISSN 1726-4529

Ganat, Tarek A. and Hrairi, Meftah and Hawlader, Mohammad Nurul Alam (2016) Reliability analysis of multiphase flow measurements in different oil fields. Oil Gas European Magazine, 42 (3). pp. 133-139. ISSN 0342-5622

Yosra, Yousif and Elfaki, Faiz Ahmed Mohamed and Hrairi, Meftah (2016) Analysis of partly interval-censored data under competing risks framework. International Journal of Computer Science and Network Security, 16 (8). pp. 25-28. ISSN 1738-7906

Eshteyah, Mohanna and Hrairi, Meftah and Mohiuddin, A. K. M. (2016) Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology, 82 (1-4). pp. 179-195. ISSN 0268-3768 E-ISSN 1433-3015

Heraiz, M and Sahnoune, F and Hrairi, Meftah and Saheb, Nouari and Ouali, A (2016) Kinetics of mullite formation from kaolinite and boehmite. Molecular Crystals and Liquid Crystals, 628 (1). pp. 55-64. ISSN 1542-1406 E-ISSN 1563-5287

Eshteyah, Mohanna and Hrairi, Meftah (2016) Multi-objective optimization of clinching joints quality using Grey-based Taguchi method. The International Journal of Advanced Manufacturing Technology, 87. pp. 233-249. ISSN 0268-3768 E-ISSN 1433-3015

M. M, Eshtayeh and Hrairi, Meftah (2016) Recent and future development of the application of finite element analysis in clinching process. International Journal of Advanced Manufacturing Technology, 84 (9). pp. 2589-2608. ISSN 0268-3768 E-ISSN 1433-3015

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2015) Waste heat recovery in heat pump systems: solution to reduce global warming. IIUM Engineering Journal, 16 (2). pp. 31-42. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. Advanced Materials Research, 1115. pp. 539-542. ISSN 1022-6680

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Survey of active structural control and repair using piezoelectric patches. Actuators, 4. pp. 77-98. ISSN 2076-0825

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Mode I stress intensity factor for a cracked plate with an integrated piezoelectric actuator. Advanced Materials Research, 1115. pp. 517-522. ISSN 1022-6680

Djemana, Mohamed and Hrairi, Meftah (2015) Damage detection in structures using electromechanical impedance and finite element analysis. Applied Mechanics and Materials, 799-80. pp. 971-975. ISSN 1660-9336

Ganat, Tarek A. and Hrairi, Meftah and Hawlader, Mohammad Nurul Alam and Osman, Farj (2015) Development of a novel method to estimate fluid flow rate in oil wells using electrical submersible pump. Journal of Petroleum Science and Engineering, 135. pp. 466-475. ISSN 0920-4105

Abuzaid, Ahmed and Shaik Dawood, Mohd. Sultan Ibrahim and Hrairi, Meftah (2015) Effects of adhesive bond on active repair of aluminium plate using piezoelectric patch. Applied Mechanics and Materials, 799-80. pp. 788-793. ISSN 1660-9336

Eshteyah, Mohanna and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim and Mohiuddin, A. K. M. (2015) Finite element modeling of clinching process for joining dissimilar materials. Advanced Materials Research, 1115. pp. 109-112. ISSN 1022-6680

Eshteyah, Mohanna and Hijazi, Ala and Hrairi, Meftah and UNSPECIFIED (2015) Nondestructive evaluation of welded joints using digital image correlation. Journal of Nondestructive Evaluation, 34 (4). pp. 1-12. ISSN 0195-9298

Mohamed Ali, Jaafar Syed and Hrairi, Meftah and Mohamad, Masturah (2015) Stress analysis of thin-walled laminated composite beams. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10088-10095. ISSN 1819-6608

Abuzaid, Ahmed and Shaik Dawood, Mohd. Sultan Ibrahim and Hrairi, Meftah (2015) The effect of piezoelectric actuation on stress distribution in aluminum plate with circular hole. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9723-9729. ISSN 1819-6608

Echrif, Salah B. M. and Hrairi, Meftah (2014) Significant parameters for the surface roughness in incremental forming process. Materials and Manufacturing Processes, 29 (6). pp. 697-703. ISSN 1532-2475 (O), 1042-6914 (P)

Hrairi, Meftah and Abdullah, Abdullah F. and Ahmed, Mirghani Ishak (2013) Cooling of motorcyclist helmet with thermoelectric module. Middle-East Journal of Scientific Research, 13. pp. 103-108. ISSN 1990-9233

Hrairi, Meftah and Baharom, Badrul Hanafi (2013) Design and modelling of silicon MEMS accelerometer. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 181-187. ISSN 1755-9766

Hrairi, Meftah and Ali, Arafath and Rizk, Abd El-Fattah (2012) Analysis of thermal stress intensity factors for edge cracked bimaterial system. Advanced Materials Research, 576. pp. 766-769. ISSN 1022-6680

Hrairi, Meftah and Mohammad, Masturah and Ismail, Siti Maisara (2012) Monitoring of fatigue damage using ultrasonics and finite element analysis. Advanced Materials Research, 576. pp. 655-658. ISSN 1022-6680

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Comparison of diesel emission experiments in view of the environment: a case study at Dubai. International Journal of Management Science and Engineering Management, 7 (1). pp. 36-42. ISSN 1750-9653

Hrairi, Meftah and Elias, Mohd Azimin (2012) Detection of foreign bodies in canned foods using ultrasonic testing. International Food Research Journal, 19 (2). pp. 543-546. ISSN 19854668 (P), 22317546 (O)

Ahmed, Mirghani Ishak and Hrairi, Meftah (2012) Efficient cryogenic cooling during machining of rolled AISI 4340 steel. Advanced Materials Research, 576. pp. 123-126. ISSN 1022-6680

Echrif, Salah B. M. and Hrairi, Meftah (2012) Finite element investigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 169-173. ISSN 1755-9766

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Improvement of greenhouse by reducing gas emissions using replacement policy. International Journal of Energy Technology and Policy, 8 (3/4/5/). pp. 323-335. ISSN 1741-508X

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Potential for improving vehicle fuel efficiency and reducing the environmental pollution via fuel ionization. International Journal of Environmental Science and Technology , 9 (3). pp. 495-502. ISSN 1735-1472 (P), 1735-2630 (O)

Echrif, Salah B. M. and Hrairi, Meftah (2011) Research and progress in incremental sheet forming processes. Materials and Manufacturing Processes, 26. pp. 1404-1414. ISSN 1532-2475 (O), 1042-6914 (P)

Hrairi, Meftah and Chtourou, Hedi and Gakwaya, Augustin and Guillot, Michel (2011) Modeling the powder compaction process using the finite element method and inverse optimization. The International Journal of Advanced Manufacturing Technology, 56 (5-8). pp. 631-647. ISSN 0268-3768

Chebil, Jalel and Hrairi, Meftah and Abushikhah, Nazih (2011) Signal analysis of vibration measurements for condition monitoring of bearings. Australian Journal of Basic and Applied Sciences, 5 (1). pp. 70-78. ISSN 1991-8178

Echrif, Salah B. M. and Hrairi, Meftah (2011) Process simulation and quality evaluation of incremental sheet forming. IIUM Engineering Journal, 12 (3). pp. 185-196. ISSN 1511-788X

Hrairi, Meftah and Ahmed, Mirghani Ishak and Ismail, Ahmad Faris (2010) Mixed-convection heat transfer from simulated air-cooled electronic devices: experimental and numerical study. Journal of Thermophysics and Heat Transfer, 24 (1). pp. 165-172. ISSN 1533-6808 (O), 0887-8722 (P)

Hrairi, Meftah (2009) Statistical Signal Processing and Sorting for Acoustic Emission Monitoring of High-Temperature Pressure Components. Experimental Techniques, 33 (5). pp. 35-43. ISSN 1747-1567

Hrairi, Meftah (2009) Using acoustic emission and fractography to evaluate defects induced by corrosive environment. Corrosion Engineering, Science and Technology, 44 (4). pp. 251-260. ISSN 1743-2782 (O), 1478-422X (P)

Hrairi, Meftah and Ahmed, Mirghani Ishak and Nimir, Yassin (2009) Compaction of fly ash–aluminum alloy composites and evaluation of their mechanical and acoustic properties. Advanced Powder Technology, 20 (6). pp. 548-553. ISSN 0921-8831

A. Rizk, Abd El-Fattah and Hrairi, Meftah (2009) Edge-cracked bimaterial systems under thermal heating. International Journal of Solids and Structures, 46 (7-8). pp. 1648-1658. ISSN 0020-7683

Ahmed, Mirghani Ishak and Hrairi, Meftah and Ismail, Ahmad Faris (2009) On the characteristics of multistage evacuated solar distillation. Renewable Energy, 34. pp. 1471-1478. ISSN 0960-1481

Albagul, Abdulgani and Hrairi, Meftah and Wahyudi, Martono and Hidayathullah, M. F. (2006) Design and development of sensor based traffic light system. American Journal of Applied Sciences , 3 (3). pp. 1745-1749. ISSN 1546-9239 E-ISSN 1554-364

Book

Hrairi, Meftah, ed. (2011) Advanced topics in mechanical behavior of materials. IIUM Press, Kuala Lumpur. ISBN 978-967-418-174-1

Book Chapter

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2017) Effect of periodic drying on energy utilization, product quality, and drying time. In: Intermittent and nonstationary drying technologies: principles and applications. Advances in Drying Science and Technology . CRC Press - Taylor & Francis Group, Florida, USA, pp. 19-32. ISBN 9781138746299

Hawlader, Mohammad Nurul Alam and Baradey, Y. and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Drying of fruits and vegetables: The impact of different drying methods on product quality. In: Advances in Heat Pump-Assisted Drying Technology. Advances in Drying Science & Technology . CRC Press, Boca Raton, Florida, pp. 189-215. ISBN 978-1-4987-3499-8

Hrairi, Meftah and Rizk, Abd El-Fattah (2014) Edge Crack, Bimaterial Systems. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1085-1092. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

Rizk, Abd El-Fattah and Hrairi, Meftah (2014) Edge crack, composite materials. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1092-1100. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

Rizk, Abd El-Fattah and Hrairi, Meftah (2014) Edge crack, isotropic material. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1100-1109. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

Hrairi, Meftah and Zuhudi, Nurul Farahana (2011) Corrosion detection in aircraft structures by ultrasonic method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 45-54. ISBN 978-967-418-148-2

Hrairi, Meftah and Rizal, Mohd Shah and Echrif, Salah B. M. (2011) Development of automatic magnetic particle system for automotive parts inspection. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 160-165. ISBN 978-967-418-216-8

Hrairi, Meftah and Echrif, Salah B. M. (2011) Enhancing magnetic particle testing of automotive parts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 189-195. ISBN 9789674181741

Hrairi, Meftah and Nawi, Saiful Mazwan (2011) Experimental studies of dieless forming. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 167-171. ISBN 9789674181741

Hrairi, Meftah and Mohamad, Masturah and Ismail, Siti Maisara (2011) Fatigue damage characterization of aluminum alloy plates. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 55-62. ISBN 978-967-418-148-2

Hrairi, Meftah and Chtourou, Hedi (2011) Finite element modeling of the powder compaction process. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 203-252. ISBN 978-967-418-020-1

Hrairi, Meftah (2011) General framework for inverse identification of consecutive parameters. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 177-182. ISBN 9789674181741

Hrairi, Meftah (2011) Inverse parameter identification of elastic and inelastic constitutive material models. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 183-188. ISBN 9789674181741

Hrairi, Meftah and Mohamad Ravi, Fadzly (2011) Mechanical properties of sintered aluminum alloy compacts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 156-160. ISBN 978-967-418-174-1

Hrairi, Meftah and Hussin, Asmu' (2011) Numerical simulation of green compacts. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 161-166. ISBN 978-967-418-174-1

Hrairi, Meftah and Hussin, Asmu'i and Mohamad Ravi, Fadzly (2011) Overview of the powder metallurgy process. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 151-155. ISBN 9789674181741

Hrairi, Meftah and Rizal, Mohd Shah and Echrif, Salah B. M. (2011) Performance of an automatic magnetic particle inspection of automotive parts. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 166-171. ISBN 978-967-418-216-8

Hrairi, Meftah and Jamil, Fatimah (2011) Study of spot welding process. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 172-176. ISBN 9789674181741

Ahmed, Mirghani Ishak and Hrairi, Meftah (2011) Thermal analysis of a micro device used for detection of colorectal cancer. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 220-228. ISBN 9789674181581

Hrairi, Meftah and Khalifa, Othman Omran (2009) An Integrated approach of ethics and professional issues into engeneering curriculum. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 275-281. ISBN 9789833855674

Conference or Workshop Item

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19-20 September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Modeling different repair configurations of an aluminum plate with a hole. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Zakaria, Faiz and Hrairi, Meftah and Daoud, Jamal Ibrahim (2018) Multi-objective optimization of incremental sheet metal forming. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Hrairi, Meftah (2017) 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016. In: "3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016", 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur; Malaysia.

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Estimation of stress concentration factor of plate with hole using piezoelectric actuator and finite element method. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Djemana, Mohamed and Hrairi, Meftah (2017) Impedance based detection of delamination in composite structures. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ganat, Tarek A. and Hrairi, Meftah and Hawlader, Mohammad Nurul Alam (2017) Validation of ESP oil wells measured parameters using simulation olga software. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Zyoud, Abdallah and Elfaki, Faiz A. M. and Hrairi, Meftah (2017) Parametric model based on imputations techniques for partly interval censored data. In: 4th International Conference on Mathematical Applications in Engineering 2017, ICMAE 2017, 8-9 August 2017, Kuala Lumpur, Malaysia.

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Comparative study of R134a and R744 driven solar assisted heat pump systems for different applications. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 July 2016, Kuala Lumpur; Malaysia.

Asrar, Waqar and Altaf, Afaq and Omar, Ashraf Ali and Hrairi, Meftah and Thong , Boon Tan (2015) Aerodynamic performance of a naca 23012 half wing model with a reverse delta wing type add-on device. In: 8th Ankara International Aerospace Conference, 10-12 Sep 2015, Ankara, Turkey.

Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2014) Derivation of stress intensity factor for a cracked plate with an integrated piezoelectric actuator. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

R., Mizanur and Khan, Sheroz and A Rahman, M. and Hrairi, Meftah and Ferdaus, Mohammad Meftahul and Shahid, Zeeshan (2014) A battery charge balancing system with reducing inrush high spike current for electric vehicle. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2014), 25 November 2014, Kuala Lumpur, MAlaysia.

Ihsan, Sany Izan and Hrairi, Meftah and Khalifa, Othman Omran (2013) Course Continual Quality Improvement (CQI) implementation of Outcome-Based Education (OBE) in engineering education: the Kulliyyah of Engineering, IIUM experience. In: International Conference on Engineering Education 2013, 22nd-25th Dec. 2013, Madinah, Kingdom of Saudi Arabia.

Tahmasebpour, Kamyar and Shobaki, Mohammed M. and Hrairi, Meftah (2013) Design and optimization of a micro capacitive pressure sensor. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Mohammed, Mohammed Idris and Mustapha, Faizal and Hrairi, Meftah and Sulaeman, Erwin and Mohd Khairol, Anuar and Dyang, Laila and Hojazi, Farzad (2013) Penang bridge 1 loading analysis using British standard and finite element method for structural health monitoring. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

P M, Aaqib Rashad and Hrairi, Meftah and M, Santhosham and Boopathy, Rajendra (2013) Study of hardness and microstructure of Fe-C-Si-Mn-B hardfacing alloy. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Echrif, Salah B. M. and Hrairi, Meftah (2013) An investigation of temperature effect on incremental forming. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Hrairi, Meftah and Abdullah, Abdullah F. and Ahmed, Mirghani Ishak (2012) Design and simulation of a thermoelectric cooling system for motorcyclist helmet. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE’2012), 3-5 July 2012, Kuala Lumpur, Malaysia.

Hrairi, Meftah and Baharom, Badrul Hanafi (2011) Design and modeling of silicon MEMS accelerometer. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hrairi, Meftah and Elias, M. A. (2011) Detection of foreign bodies in canned foods using ultrasonic testing. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Hrairi, Meftah and Echrif, Salah B. M. (2011) Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May, 2011, Kuala Lumpur.

Hrairi, Meftah and Chtourou, Hedi (2010) Predicting density distribution in green compacts using finite element simulations. In: International Conference on Mathematical Applications in Engineering (ICMAE’10), 3 - 4 Aug, 2010, Kuala Lumpur.

Chebil, Jalel and Hrairi, Meftah and Abushikhah, Nazih (2010) Signal analysis of vibration measurements for condition monitoring of bearings. In: International Conference on Mathematical Applications in Engineering (ICMAE’10), 3 - 4 Aug, 2010, Kuala Lumpur.

Hrairi, Meftah and Abu Bakar, Anwar (2010) Development of an adaptive headlamp system. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-13 May 2010, Kuala Lumpur.

Hrairi, Meftah and Zuhudi, Nurul Farahana (2010) Ultrasonic techniques for detection of thinning defects in metal plates. In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment, 14 - 16 April, 2010, Kuching, Sarawak.

Al Ali, Yousif and Al Kattan, Ibrahim and Hrairi, Meftah (2010) Risk analysis factors of the emission in transportation a case study - Dubai taxi. In: 2nd International Conference on Engineering Systems Management and its Applications (ICESMA2010), 30 March 2010 - 1 Apr 2010 , Dubai, United Arab Emirates.

Hrairi, Meftah and Rizal, Mohd Shah and Ahmed, Elsiddig Abdelazim (2010) Towards automatic testing and defect recognition in magnetic particle inspection. In: The 2nd International Conference on Engineering and ICT, 18 - 20 February, 2010, Malacca, Malaysia.

Hrairi, Meftah and Rizal, Mohd Shah (2009) Development of a system for automatic magnetic particle inspection of automotive components. In: Proceedings of 2nd CUTSE International Conference 2009 CUTSE'09, November, Miri, Malaysia. (Unpublished)

Monograph

Hrairi, Meftah (2013) Development of a thermoelectrically air conditioned motorcycle helmet. Research Report. s.n, Kuala Lumpur. (Unpublished)

Hrairi, Meftah (2012) Design and development of an automated magnetic particle testing of automotive parts. Research Report. [s.n]. (Unpublished)

This list was generated on Wed Sep 18 09:49:02 2019 +08.