Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ807 Renewable energy sources"

Article

ANR, Reddy and Saleh, A. A. and Islam, Md. Saiful and Hamdan, S. and Maleque, Md. Abdul (2016) Biodiesel production from crude jatropha oil using a highly active heterogeneous nanocatalyst by optimizing transesterification reaction parameters. Energy & Fuels, 30 (1). pp. 334-343. ISSN 0887-0624 E-ISSN 1520-5029

Aamir, Shahzad and Arslan, Ahmed and Moinuddin, Mohammed Quazi and Muhammad, Jamshaid and Ashrafur Rahman, S.M and Masjuki, Hassan and Hafiz Muhammad Asif, Javed (2021) Current research and development status of corrosion behavior of automotive materials in biofuels. Energies, 14 (1440). pp. 1-36. ISSN 1996-1073

Abbas, Muhammad Mujtaba and Kalam, Mohammad Abul and Hassan, Masjuki and Gul, M. and M. Soudagar, Manzoor Elahi and Ong, Hwai Chyuan and Ahmed, Waqar and Atabani, Abdulaziz and Razzaq, Luqman and Yusoff, Mohammad N.A.M. (2020) Comparative study of nanoparticles and alcoholic fuel additives-biodiesel-diesel blend for performance and emission improvements. Fuel, 279. pp. 1-11. ISSN 0016-2361

Abdelkerim, A I and Sami Eusuf, MMR and Salami, Momoh Jimoh Eyiomika and Aibinu, Abiodun Musa and Eusuf, Muhammad Abu (2013) Development of solar powered irrigation system. IOP Conference Series: Materials Science and Engineering, 53 (1). 012005(1)-012005(13). ISSN 1757-8981

Abdul Hakim, Javid and Raed, Kafafy and Erwin, Sulaeman and Sany, Ihsan and Mahmoud Idres, Moumen Mohammed (2015) Modeling and analysis of flutter-based thin-film cantilever microgenerator. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9688-9697. ISSN 1819-6608

Ahamed, R. and Kaderi, Mohd Arifin and Rashid, Muhammad Mahbubur and Ferdaus, Mohammad Meftahul (2014) Development and performance testing of a light weight portable solar rice cooker in rural areas of Bangladesh. International Journal of Renewable Energy Resources, 4 (2). pp. 46-48. ISSN 2289-1846

Ahmad, Abdul Aziz and Othman, Raihan (2013) Recent advances in biofuel cell and emerging hybrid system. International Journal of Engineering and Technology Development (IJEST), 1 (3). pp. 64-67. ISSN 2337-3180

Ahmad, Abdul Aziz and Othman, Raihan and Yusof, Faridah and Abd. Wahab, Mohd. Firdaus (2011) Zinc-laccase biofuel cell. IIUM Engineering Journal, 12 (4). pp. 153-160. ISSN 1511-788X

Ahmad, Farah and Kalam, M.A. and Zhang, Zhanying and Masjuki, Haji Hassan (2022) Sustainable production of furan-based oxygenated fuel additives from pentose-rich biomass residues. Energy Conversion and Management: X, 14 (100222). ISSN 2590-1745 (In Press)

Alam, Jubayer Abdullah Rafiul and Abu Talib, Abd Rahim and Altarazi, Yazan Sofyan Mohammed and Yusaf, Talal and Azami, Muhammad Hanafi and Nik Mohd, Nik Ahmad Ridhwan (2023) Experimental investigation on gas turbine engine performance using alternative fuel. Journal of Aeronautics, Astronautics and Aviation,, 55 (3S). pp. 479-483. ISSN 1990-7710

Alnajjar, Masood and Rashid, Muhammad Mahbubur (2021) Design and modelling of PV-Diesel Hybrid Energy System with fuzzy logic controller. Asian journal of electrical and electronic engineering, 1 (2). pp. 1-13. E-ISSN 2785-8189

Amir, Shahrul and Othman, Raihan and Subban, Ri Hanum Yahaya and Mohamed, Nor Sabirin (2011) Ionic conductivity of PEMA-LiClO4 polymer electrolytes. Sains Malaysiana, 40 (7). pp. 701-705. ISSN 0126-6039

Asrul, Nurrisa and Othman, Raihan and Mohd. Salleh, Hamzah and Ali, Mohammad Nazri (2013) Influence of buffer electrolyte and ph on the electrochemical performance of glucose oxidase-laccase biofuel cell. Journal of Biobased Materials and Bioenergy, 7 (2). pp. 194-197. ISSN 1556-6560

Asrul, Nurrisa and Othman, Raihan and Yahya, Muhd Zu Azhan and Mohd. Salleh, Hamzah and Yusof, Faridah and Ahmad, Abdul Aziz (2012) Freely-suspended, single chamber glucose oxidase-laccase enzymatic fuel cell. Advanced Materials Research, 512/15. pp. 1499-1502. ISSN 1022-6680

Awang Bakar, Aimi Syahirah and Othman, Raihan and Yahya, Muhd Zu Azhan and Othman, Rashidi and Nik Din, Nik Mohd Suhaimi (2012) Bioenergy from loeophyllum-Rhizopus fungal biofuel cell. Advanced Materials Research, 512/15. pp. 1461-1465. ISSN 1022-6680

Azami, Muhammad Hanafi and Savill, Mark (2017) Comparative study of alternative biofuels on aircraft engine performance. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231 (8). pp. 1509-1521. ISSN 0954-4100 E-ISSN 2041-3025

Azami, Muhammad Hanafi and Savill, Mark (2016) Modelling of spray evaporation and penetration for alternative fuels. Fuel, 180. pp. 514-520. ISSN 0016-2361

Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang (2017) Comparison of aircraft engine performance and emission analysis using alternative fuels. International Journal of Sustainable Aviation, 3 (1). pp. 43-63. ISSN 2050-0467 E-ISSN 2050-0475

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Hrairi, Meftah and Hafner, A and Gomes, Joao and Sider, Ishaq (2020) CFD and experimental evaluation of R744 transcritical gas cooler used in solar assisted heat pump system. Elixir Mechanical Engineering, 145. pp. 54726-54733. ISSN 2229-712L

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Hrairi, Meftah and Ismail, Ahmad Faris (2018) Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation, 3 (4 (September-October)). pp. 160-186. ISSN 2456-1851

Beroual, Sabir and Hrairi, Meftah (2023) Electromechanical impedance simulation-based evaluation of cracks in photovoltaic solar cells. Arabian Journal for Science and Engineering. pp. 1-17. ISSN 2193-567X E-ISSN 2191-4281

Beroual, Sabir and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati and Shaik Dawood, Mohd. Sultan Ibrahim (2024) Solar cell micro crack detection technique using electromechanical impedance and finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (8). pp. 3531-3548. ISSN 0954-4062 E-ISSN 2041-2983

Diallo, Amadou Dioulde Donghol and Al-Khatib, Ma An Fahmi Rashid and Alam, Md. Zahangir and Maizirwan, Mel (2021) Enhancement of the calorific value of empty fruit bunch (EFB) by adding municipal solid waste as solid fuel in gasification process. IIUM Engineering Journal, 22 (2). pp. 10-20. ISSN 1511-788X E-ISSN 2289-7860

Diallo, Amadou Dioulde Donghol and Al-Khatib, Ma An Fahmi Rashid and Alam, Md. Zahangir and Maizirwan, Mel (2021) Municipal solid waste and palm kernel shell mixture as feedstock in the gasification process. Biological And Natural Resources Engineering Journal, 5 (1). pp. 1-12. E-ISSN 2637-0719

Fayaz, Hussain and Ramesh, S. and Afzal, Asif and Agbulut, Ümit and Khan, Sher Afghan and Asif, Mohammed and Raja, Vijayanandh and Linul, Emanoil (2024) Investigation of numerical phase transition of nano-enhanced SiC/paraffin wax PCM in solar-assisted water desalination system. Thermal Science and Engineering Progress, 50. pp. 1-15. E-ISSN 2451-9049

Fazal, M. A. and Sundus, F. and Masjuki, Haji Hassan and Rubaiee, Saeed and Quazi, M.M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. pp. 1-8. ISSN 2213-1388

Hasbullah, Mohd Faiz Ikhwan and Mohamed Noor, Noraini (2022) Studies on durian peel biomass derived activated carbon for energy storage application. International Journal of Electroactive Materials, 10 (1). pp. 68-77. E-ISSN 2289-8360

Hassim, Muhammad Ridhwaan and Sapardi, Mohd Azan Mohammed and Kamarul Baharin, Nur Marissa and Syed Abu Bakar, Syed Noh and Abdullah, Muhammad and Md Nor, Khairul Affendy (2021) CFD modelling of wake-induced vibration at low Reynolds number. Semarak Ilmu Publishing, 13 (11). pp. 53-64. ISSN 2811 - 3969

Hawlader, Mohammad Nurul Alam and Brinkworth, B J (1981) An analysis of the non-convecting solar pond. Solar Energy, 27 (3). pp. 195-204. ISSN 0038-092X

Hawlader, Mohammad Nurul Alam and Chou, S K and Rahman, S M A and Lau, K W Eugene (2003) Solar assisted heat-pump dryer and water heater. Applied Energy, 74 (1-2). pp. 185-193. ISSN 0306-2619

Hawlader, Mohammad Nurul Alam and Chou, S K and Ullah, M Z (2001) The performance of a solar assisted heat pump water heating system. Applied Thermal Engineering, 21 (10). pp. 1049-1065. ISSN 1359-4311

Hawlader, Mohammad Nurul Alam and Dey, P K and Sufian, Diab and Chang, Y C (2004) Solar assisted heat pump desalination system. Desalination, 168 (1-3). pp. 49-54. ISSN 0011-9164

Hrairi, Meftah and Abdullah, Abdullah F. and Ahmed, Mirghani Ishak (2013) Cooling of motorcyclist helmet with thermoelectric module. Middle-East Journal of Scientific Research, 13. pp. 103-108. ISSN 1990-9233

Ibrahim, Ahmad Imran and Abdul Rahman, Farah Diyana and Rohaizat, Muazzin (2018) Dual axes solar tracker. International Journal of Electrical and Computer Engineering, 8 (1). pp. 1887-1892. ISSN 2088-8708

Islam, Mazharul and Amin, Muhammad Ruhul and Ani, Farid Nasir (2014) Evaluation of the prospects of using solar thermal air-conditioning systems in Saudi Arabia. Applied Mechanics and Materials, 554. pp. 271-275. ISSN 1662-7482

Ismail, Izham Izzat and Azami, Muhammad Hanafi (2022) Thrust chamber dynamic and propulsive performance of biofuels under detonation combustion. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (2). pp. 71-93. ISSN 2289-7879

Karim, M A and Hawlader, Mohammad Nurul Alam (2004) Development of solar air collectors for drying applications. Energy Conversion and Management, 45 (3). pp. 329-344. ISSN 0196-8904

L., Harish Kumar and Kazi, Salim Newaz and Masjuki, Haji Hassan and Mohd Zubir, Mohd Nashrul and Jahan, Afrin and Oon, Cheen Sean (2021) Experimental study on the effect of bio‑functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector. Journal of Thermal Analysis and Calorimetry. pp. 1-18. ISSN 1388-6150 E-ISSN 1588-2926

Leman, Z. and Sapuan, S. M. and Saifol, A.M. and Maleque, Md. Abdul and Ahmad, M.M.H.M. (2008) Moisture absorption behaviour of sugar palm fiber reinforced epoxy composites. Materials and Design, 29. pp. 1666-1670. ISSN 0261-3069

Leman, Z. and Sastra, H. Y. and Sapuan, S. M. and Hamdan, M. M. and Maleque, Md. Abdul (2005) Study on impact properties of arenga pinnata fibre reinforced epoxy composites. Jurnal Teknologi Terpakai, 3 (1). pp. 14-19. ISSN 1693-2536

Main, Uddin and S. M. A., Motakabber and M. I. R., Rokon and S. A. Fawwaz, Wafa (2021) Piezoelectric module based electronic gadget charging systems. Technology Reports of Kansai University, 63 (02). pp. 7197-7202. ISSN 0453-2198

Maleque, Md. Abdul and Belal, F. Y. and Sapuan, S. M. (2007) Mechanical properties study of pseudo-stem banana fiber reinforced epoxy composite. The Arabian journal for science and engineering , 32 (2B). pp. 359-364. ISSN 1319-8025

Manshor, Hanisah and Othman, Raihan and Nordin, Anis Nurashikin and Ani, Mohd Hanafi and Saputra, Hens (2011) Observation on responsive OCV variation od Zinc-Air cell with relative humidity content. IIUM Engineering Journal, 12 (5). pp. 79-86. ISSN 1511-788X

Masjuki , H.H. and Saidur , Rahman and Choudhury, Imtiaz Ahmed and Mahlia, Teuku Meurah Indra and Ghani, A.K. and Maleque, Md. Abdul (2001) The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia. Energy, 26 (7). pp. 723-737. ISSN 0360-5442

Memon, Mujtaba S and Haeng, Muk Cho and Masjuki, Haji Hassan and M.A, Kalam and Miiro, Farooq and M. Soudagar, Manzoore Elahi and Muhammad, Gul and Ahmed, Waqar and Afzal, Asif and Bashir, Shahid and V., Dhana Raju and Yaqoob, Haseeb and A.Z, Syahir (2021) Effect of alcoholic and nano-particles additives on tribological properties of diesel–palm–sesame–biodiesel blends. Energy Reports, 7. pp. 1162-1171. ISSN 2352-4847

Mohamad, Ahmad Azmin and Abdullah, Nur Azam (2022) Recycling electric vehicle batteries. @green|, 2 (11). p. 20. ISSN 2756-7818

Mohamad, Souad A. and Buys, Yose Fachmi and Hadzari , Muhammad Hazwan and Othman, Maizatulnisa (2015) A light material for wind turbine blades. Advanced Materials Research, 1115. pp. 308-313. ISSN 1662-8985

Mohamad , A. A. and Mohamed, N. S. and Yahya, M. Z. A. and Othman, Raihan and Ramesh, S. and Alias, Y. and Arof, A. K. (2003) Ionic conductivity studies of poly(vinyl alcohol) alkaline solid polymer electrolyte and its use in nickel–zinc cells. Solid State Ionics, 156 (1-2). pp. 171-177. ISSN 0167-2738

Mohamed, Norhafana and Ismail, Ahmad Faris and Abdul Majid, Zafri Azran (2015) Performance evaluation of solar collectors using a solar simulator. IIUM Engineering Journal, 6 (2). pp. 79-90. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

Mohamed Noor, Noraini and Abdullah, Ezzat Chan and Othman, Raihan and Nasibab, Mubarak Mujawar (2023) Removal of cadmium ions via the magnetic biochar synthesised from sugarcane bagasse: factors affecting yield and adsorption capability. Journal of Sustainability Science and Management, 18 (1). pp. 70-85. ISSN 1823-8556 E-ISSN 2672-7226

Mohd Zawi, Nor Liza and Othman, Raihan and Ani, Mohd Hanafi (2012) Zn/MCM-41/MnO2 leclanché button cell R2025 for low rate applications. Advanced Materials Research, 576. pp. 374-377. ISSN 1022-6680

Mohiuddin, A. K. M. and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2014) Design and investigation of a fuel cell car prototype. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 321-333. ISSN 1745-6444 (O), 1745-6436 (P)

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2015) Investigation of PEM fuel cell for automotive use. IIUM Engineering Journal, 16 (2). pp. 69-78. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

Mohiuddin, A. K. M. and Sabarudin, Mohamad Syabil and Khan, Ahsan Ali and Ihsan, Sany Izan (2017) Design and development of hybrid energy generator (photovoltaics) with solar tracker. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-6. E-ISSN 1757-899X

Nor Hairin, Assayidatul Laila and Othman, Raihan and Ani, Mohd Hanafi and Saputra, Hens (2011) High discharge rate electrodeposited zinc electrode for use in alkaline microbattery. IIUM Engineering Journal, 12 (5). pp. 115-122. ISSN 1511-788X

Nordin, Norfaizul Izwan and Ab Rahim, Rosminazuin and Md Ralib @ Md Raghib, Aliza 'Aini (2019) Flexible PVDF thin film as piezoelectric energy harvester. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 443-449. ISSN 2089-3191 E-ISSN 2302-9285

Othman, Raihan and Abdul Hamid, Yahaya and Arof, Abdul Kariem (2002) A zinc–air cell employing a porous zinc electrode fabricated from zinc–graphite-natural biodegradable polymer paste. Journal of Applied Electrochemistry, 32 (12). pp. 1347-1353. ISSN 1572-8838 (O), 0021-891X (P)

Othman, Raihan and Ahmat, Farouq and Ibrahim, Muhd Amlie and Nor Hairin, Assayidatul Laila and Ani, Mohd Hanafi (2012) Effect of bath formulation and plating current density on electrodeposited zinc anode’s capacity in zinc-air cell. Advanced Materials Research, 576. pp. 484-487. ISSN 1022-6680

Othman, Raihan and Basirun, Wan Jefrey and Yahaya, Abdul Hamid and Mohd Arof, Abdul Kariem (2001) Hydroponics gel as a new electrolyte gelling agent for alkaline zinc–air cells. Journal of Power Sources, 103 (1). pp. 34-41. ISSN 0378-7753

Othman, Raihan and Yahaya, Abdul Hamid and Arof, Abdul Kariem (2002) Zinc-air cell with KOH-treated agar layer between electrode and electrolyte containing hydroponics gel. Journal of New Materials for Electrochemical Systems, 5. pp. 177-182. ISSN 1480-2422

Rahman, Mohammed Ataur and Afroz, Rafia and Safrin, Mohd (2017) Recycling and disposal of lithium batteries: an economical and environmental approach. IIUM Engineering Journal, 18 (2). pp. 238-252. ISSN 1511-788X E-ISSN 2289-7860.

Rahman, S. M. A. and Saidur , Rahman and Hawlader, Mohammad Nurul Alam (2013) An economic optimization of evaporator and air collector area in a solar assisted heat pump drying system. Energy Conversion and Management, 76. pp. 377-384. ISSN 0196-8904

Razali, Nur Syazana Izzati and Yusoff, Siti Hajar and Tumeran, Nor Liza and Mohd Yunus, Muhammad Sharir Fathullah (2023) Indoor light energy harvesting technique to energize a heat sensor using polycrystalline solar panel. Bulletin of Electrical Engineering and Informatics. 3238 -3246. ISSN 2302-9285

Rozhan, Alya Naili and Cahyono, Rochim Bakti and Nomura, Takahiro and Ani, Mohd Hanafi and Mohd. Salleh, Hamzah and Akiyama, Tomohiro and Purwanto, Hadi (2016) Enhancement of oil palm empty fruit bunch char by impregnation of pyrolytic carbon from tar vapor decomposition. Journal of Renewable and Sustainable Energy, 8 (1). 013110-1-013110-11. ISSN 1941-7012

Sahid, N.S.M. and Rahman, Md. Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2017) Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. International Journal of Automotive and Mechanical Engineering, 14 (1). pp. 3913-3926. ISSN 2229-8649 E-ISSN 2180-1606

Sanusi, Aliyah Nur Zafirah and Shao, Li and Ibrahim, M. Najib (2012) Passive ground cooling system for low energy buildings in Malaysia (hot and humid climates). Renewable Energy, 49. pp. 193-196. ISSN 0960-1481

Saputra, Hens and Othman, Raihan (2012) A high rate zinc/MCM-41/air cell. ISESCO Journal of Science and Technology, 8 (13). pp. 44-53. ISSN 2028-8077

Saputra, Hens and Othman, Raihan and Ani, Mohd Hanafi and Sutjipto, Agus Geter Edy and Muhida, Riza (2011) High energy density zinc-air microbattery utilising inorganic MCM-41 membrane. Materials Research Innovations, 15 (1). pp. 114-117. ISSN 1433-075X

Saputra, Hens and Othman, Raihan and Sutjipto, Agus Geter Edy and Muhida, Riza (2011) MCM-41 as a new separator material for electrochemical cell: application in zinc–air system. Journal of Membrane Science, 367 (1-2). pp. 152-157. ISSN 0376-7388

Shaik, Saboor and Vigneshwaran, Pethurajan and Roy, Abin and Kontoleon, Karolos J. and Mazzeo, Domenico and Cuce, Erdem and Saleel, C Ahamed and Alwetaishi, Mamdooh and Khan, Sher Afghan and Gürel, Ali Etem and Ağbulut, Ümit (2023) Experimental analysis on the impacts of soil deposition and bird droppings on the thermal performance of photovoltaic panels. Case Studies in Thermal Engineering, 48. pp. 1-11. ISSN 2214-157X

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Safiei, Wahaizad and Kadirgama, Kumaran and Maleque, Md. Abdul (2022) Effects of minimum quantity lubrication technique in different machining processes-a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 135-159. ISSN 2289-7879

Wan Abdul Hamid, Wan Luqman Hakim and Basharuddin, Nurul 'Ilya and Sukindar, Nor Aiman (2022) Adaptive solar panel - overview and conceptual design. IOP Conf. Series: Materials Science and Engineering, 1244. pp. 1-7. ISSN 17578981, 1757-899X

Wan Mohd. Sukri, Wan Nur Asiah and Othman, Raihan and Abd-Wahab, Firdaus and Mohamed Noor, Noraini (2021) Self-sustaining bioelectrochemical cell from fungal degradation of lignin-rich agrowaste. Energies, 14 (8). pp. 1-11. ISSN 1996-1073

Zainan, Nur Hidayah and Mohammed Sapardi, Mohd Azan and Ho, Bernard Chon Han and Siajam, Shamsul Izhar and Mustapa Kamal, Siti Mazlina and Danquah, Michael K. and Harun, Razif (2019) Kinetic and thermodynamic characterization of amino acids generation via subcritical water reaction of microalgae Nannochloropsis sp. biomass. Biomass Conversion and Biorefinery. pp. 1-14. ISSN 2190-6815 E-ISSN 2190-6823

Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil (2022) Experimental investigation of integrated energy storage on thermal performance enhancement of evacuated glass-thermal absorber tube collector (EGATC) for air heating application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (1). pp. 137-152. ISSN 2289-7879

Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil (2022) Performance analysis of flat plate base-thermal cell absorber (FPBTCA): low thickness design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 122-133. ISSN 2289-7879

Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil (2021) Investigation on the thermal performance of evacuated glass-thermal absorber tube collector (EGATC) for air heating application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 48-64. ISSN 2289-7879

Zulkifly, Zahir and Yusoff, Siti Hajar and Tumeran, Nor Liza and Razali, Nur Syazana Izzati (2023) Battery energy storage system (BESS) modeling for microgrid. IIUM Engineering Journal, 24 (1). pp. 57-74. ISSN 1511-788X E-ISSN 2289-7860

Book Chapter

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2017) Effect of periodic drying on energy utilization, product quality, and drying time. In: Intermittent and nonstationary drying technologies: principles and applications. Advances in Drying Science and Technology . CRC Press - Taylor & Francis Group, Florida, USA, pp. 19-32. ISBN 9781138746299

Dahlan, Nofri Yenita and Ahmad, Nurfadzilah and Ilham, Nur Iqtiyani and Yusoff, Siti Hajar (2022) Energy security role of renewable and low-carbon technologies. In: Handbook of Energy and Environmental Security. Elsevier, pp. 39-56. ISBN 9780128240847

Zainan Nazri, Nurul Jannah and Samsudin, Sofiah and Jani, Mohd. Shah and Nik Mohd Kamal, Nik Nur Madihah (2018) Microbial fuel cells (MFCS) for sustainable energy production: an Islamic approach. In: Rejuvenating Islamic Thought. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 137-151. ISBN 978-967-491-010-5

Proceeding Paper

Ahmad, Abdul Aziz and Yusof, Faridah and Abd. Wahab, Mohd. Firdaus and Othman, Raihan (2010) Zinc-air cell employing laccase as the oxygen reduction catalyst. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu, Terengganu, Malaysia. (Unpublished)

Amin, Zakaria Mohd. and Hawlader, Mohammad Nurul Alam and Karim, Azharul (2011) A solar assisted heat pump system for desalination. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE '11), 17-19 May 2011, Kuala Lumpur.

Baradey, Y. and Hawlader, Mohammad Nurul Alam and Idres, Moumen and Ihsan, Sany Izan (2014) Improving the efficiency of poly-crystalline photovoltaic module using special transparent glass covers. In: International Meeting on Advances in Thermofluids, 26th-27th November 2014, Swiss Garden Hotel & Residences, Kuala Lumpur. (Unpublished)

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Comparative study of R134a and R744 driven solar assisted heat pump systems for different applications. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 July 2016, Kuala Lumpur; Malaysia.

Diallo, Amadou Dioulde Donghol and Al-Khatib, Ma An Fahmi Rashid and Alam, Md. Zahangir and Maizirwan, Mel (2021) Simulation of biomass and municipal solid waste pellet gasification using aspen plus. In: 6th International Conference on Biotechnology Engineering 2021, Kuala Lumpur, Malaysia (Virtual). (Unpublished)

Diallo, Amadou Dioulde Donghol and Alkhatib, Ma'an Fahmi Rashid and Alam, Md Zahangir and Mel, Maizirwan (2021) Simulation of biomass and municipal solid waste pellet gasification using Aspen Plus. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Hawlader, Mohammad Nurul Alam (2013) Utilization of solar energy and waste heat for water heating, drying and desalination of seawater. In: International Conference on Mechanical, Industrial and Material Engineering (ICMIME 2013), 1-3 November 2013, Rajshahi, Bangladesh.

Hawlader, Mohammad Nurul Alam and Ihsan, Sany Izan and Joseph, Deepu and Hamid, N Munira and Wasil, Wira E A (2012) An integrated solar thermal and photovoltaic system. In: European Workshop on Renewable Energy Systems 2012, 17-19 September 2012, Analya, Antalya, Turkey. (Unpublished)

Hawlader, Mohammad Nurul Alam and Seng, Lee Poh and Kiang, Chua Kok (2011) Performance of different photovoltaic cells operating under the meteorological conditions of Singapore. In: 4th IMAT 2011:International Meeting of Advances in Thermofluids, 3-4 October 2011, Melaka, Malaysia. (Unpublished)

Hawlader, Mohammad Nurul Alam and Shaochun, Ye (2011) An economic analysis of a solar assisted heat pump system for cooling, water heating and drying. In: 3rd Regional Symposium on Engineering and Technology 2011, 21-23 November 2011, Kuching, Sarawak, Malaysia. (Unpublished)

Hens, Saputra and Sutjipto, Agus Geter Edy and Muhida, Riza and Ani, Mohd Hanafi and Othman, Raihan (2010) Preparation and characterization of inorganic MCM-41 membrane for zinc-air microbattery. In: 3rd International Conference on Functional Materials and Devices (ICFMD 2010), 13-17 June 2010, Kuala Terengganu, Malaysia. (Unpublished)

Hossain, A. and Noor Azmi, Azran Azhim and Jaafar, A. B. and Musa, M. N. and Zaki, S. A. and D. , Noor Fazreen (2013) Ocean thermal energy conversion: the promise of a clean future. In: 2013 IEEE Conference on Clean Energy and Technology (CEAT), 18-20 November 2013, Langkawi.

Ihsan, Sany Izan and Hawlader, Mohammad Nurul Alam and Yunus, Firdaus and Mudzrin , M Irfan I (2012) An air conditioning system providing cooling, water heating and drying. In: European Workshop on Renewable Energy Systems 2012, 17-19 September 2012, Analya, Antalya, Turkey. (Unpublished)

Ihsan, Sany Izan and Mohamad Safian, Mohamad Ariff Iskandar and Mohd Taufek, Muhammad Aliff and Mohiuddin, A. K. M. (2017) Improvement design of parabolic trough. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th - 27th July 2016, Kuala Lumpur, Malaysia.

Ihsan, Sany Izan and Safian, M. A. I. M. and Taufek, M. A. M. and Mohiuddin, A. K. M. (2017) Improvement design of parabolic trough. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Mansor, Mariatul Fadzillah and Adanan, Ahmad Iman Ikmal and Ahmad Tajuddin, Husna and Azmi, Azlin Suhaida (2023) Profiling anaerobic digestion stages from cafeteria food waste for production of biogas. In: International Conference on Chemical Engineering & Sustainability 2023 (ICCHES 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia (Hybrid).

Meskon, Shahrul Razi and Sutjipto, Agus Geter Edy and Ani, Mohd Hanafi and Othman, Raihan (2010) RF magnetron sputtered YSZ thin film: Fabrication and characterizations. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu, Terengganu, Malaysia. (Unpublished)

Mohamed Noor, Noraini (2021) Studies on plant-based biomass derived activated carbon for energy storage application. In: 4th International Conference on Science and Engineering of Materials 2021, Online. (Unpublished)

Mohd Yunus, Muhammad Sharir Fathullah and Yusoff, Siti Hajar and Mohd Sapihie, Siti Nadiah and Razali, Nur Syazana Izzati (2023) Smart meter based on IoT platform. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Adeyemi, Nabeel and Muyibi, Suleyman (2013) 3-D CFD transient simulation of transesterification in stirred tank reactor. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2013) Design and Development of a Fuel Cell Car Prototype. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Nor Hairin, Assayidatul Laila and Hens, Saputra and Ani, Mohd Hanafi and Othman, Raihan (2010) Optimization of zinc electrodeposition from zinc-air cell discharge performance. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu, Terengganu, Malaysia. (Unpublished)

Nor Hairin, Assayidatul Laila and Mohd Yusaini, Nurul Batrisyia and Othman, Raihan and Mohd Salled, Mohd Faiz (2023) Synthesis and characterization of intrinsic CuO-ZnO semiconductor for thermoelectric cell using electrodeposition method. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Paul, Dilip Kumar and Karim, A.N. Mustafizul (1999) Economic performance of bio-gas plant in the context of Bangladesh. In: 2nd International Seminar on Renewable Energy for Poverty Alleviation (ISREPA-99), 26-27 November 1999, Dhaka.

Rozhan, Alya Naili and Hamzah, Mohd. Salleh and Purwanto, Hadi (2016) Carbon deposition from biotar by fast pyrolysis of palm empty fruit bunch. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), 4th-6th August 2015, Penang, Malaysia.

Sanusi, Aliyah Nur Zafirah (2012) Seeking underground for potential heat sink in Malaysia. In: KAED Presentation Day Series 1/2012, 4 July 2012, International Islamic University Malaysia. (Unpublished)

Sanusi, Aliyah Nur Zafirah and Shao, Li and Ibrahim, Md. Najib (2012) The potential of low energy earth pipe cooling in hot and humid Malaysia. In: International Conference on Green in the Built Environment (ICGBE) 2012, 29 - 30 May 2012, International Islamic University Malaysia.

Saputra, Hens and Othman, Raihan (2012) Zinc-air battery – powering electric vehicles to smart active labels. In: 1st International Conference on Engineering and Technology Development 2012 (ICETD 2012), 20-21 June, 2012, Bandar Lampung, Sumatera, Indonesia. (Unpublished)

Warimani, Mahammad Salaman and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Investigation of aircraft engine performance utilizing various alternative fuels. In: Southeast Asia Workshop on Aerospace Engineering (SAWAE 2019), 29 - 30 Aug 2019, Kuala Lumpur.

Zuheir, Mohammad and El-Faitouri, Abdulhafed S. and Rajab, Zakariya and Khalil, Ashraf F. and Alfergani, Asma and Khan, Sheroz and Ahmed, Syed Faiz and Ali, Athar (2018) A comparison between solar thermal and photovoltaic/thermal (PV/T) systems for typical household in Libya. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Zulhuda, Sonny (2016) Data governance in the renewable energy development: issues and challenges. In: International Conference Forum in Research, Science and Technology (FIRST 2016), 18th-19th Oct. 2016, Palembang, Indonesia.

Monograph

Azami, Muhammad Hanafi (2019) Investigation of three-shaft high-bypass-ratio engine performance and emission prediction using alternative fuels. Project Report. UNSPECIFIED. (Unpublished)

Maleque, Md. Abdul and Ani, Mohd Hanafi and Samat, Noorasikin and Ahmed, Abu Saleh and Rahman, Md Mustafizur (2016) Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)