IIUM Repository

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA401 Materials of engineering and construction"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Jump to: - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items at this level: 511.

-

-, Gunawan and Sopyan, Iis and Mel, Maizirwan and -, Suryanto (2014) Investigations of the effects of initial Zn concentration and sintering conditions on the phase behavior and mechanical properties of Zn-doped bcp. Advances in Environmental Biology, 8 (3(Spe)). pp. 680-685. ISSN 1995-0756 E-ISSN 1998-1066

-, Suryanto (2012) Dislocation generated by electron irradiation. Advanced Materials Research, 418-42. pp. 744-747. ISSN 1022-6680

-, Suryanto and Haider, Farag and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2017) Modelling and optimization of copper electroplating adhesion strength. IOP Conference Series: Materials Science and Engineering, 204 (012017). pp. 1-5. ISSN 1757-899X

-, Suryanto and Mahmood, Mahmood Hameed and Hazza Faizi Al Hazza, Muataz and Haider I., Farag (2018) Developing of corrosion resistance nano copper oxide coating on copper using anodization in oxalate solution. International Journal of Engineering TRANSACTIONS C: Aspects, 31 (3). pp. 450-455. ISSN 1735-9244

A

A Hamzah, Nur Hanisah and Azmi, Nurhafizah and Adesta, Erry Yulian Triblas (2011) The development of cost estimation for quality assurance system in die-casting processes. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 72-83. ISBN 9789674181598

A., Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and A. R. , Mohamed (2012) Physical property of multi walled carbon nanotube reinforced aluminium nano composite. In: World Research & Innovation Convention on Engineering & Technology (WRICET2012), 3 - 5 December 2012, KL. (In Press)

A. R. , Fatimah Azreen and Sutjipto, Agus Geter Edy and Adesta, Erry Yulian Triblas (2011) Fabrication of CuSiC composite by powder metallurgy route. Advanced Materials Research, 264/65. pp. 748-753. ISSN 1662-8985

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan (2019) Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions. Journal of Materials Research and Technology, 8 (5). pp. 4347-4353. ISSN 2238-7854

A. Raof, Natasha and Othman, Hazreen and A. Ghani, Jaharah and Che Haron, Che Hassan and Junaidi, Syarif (2014) Chip formation and coefficient of friction in turning S45C medium carbon steel. International Journal of Mechanical & Mechatronics Engineering, 14 (6). pp. 89-92. ISSN 2227-2763 E-ISSN 2077-1258

Aabid, Abdul and Baig, Muneer and Hrairi, Meftah (2023) Advanced composite materials for structural maintenance, repair, and control. Materials, 16 (2). pp. 1-3. ISSN 1996-1944

Aabid, Abdul and Hrairi, Meftah and Jaffar Syed, Mohamed Ali and Sebaey, Tamer Ali (2022) A review on reductions in the stress-intensity factor of cracked plates using bonded composite patches. Materials, 15 (9). pp. 1-20. ISSN 1996-1944

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Ibrahim, Yasser E. (2023) Review of piezoelectric actuator applications in damaged structures: challenges and opportunities. ACS Omega, 8 (3). pp. 2844-2860. ISSN 2470-1343

Aabid, Abdul and Ibrahim, Yasser and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2023) Optimization of structural damage repair with single and double-sided composite patches through the finite element analysis and Taguchi method. Materials, 16 (4). pp. 1-14. ISSN 1996-1944

Aabid, Abdul and Khan, Sher Afghan (2018) Optimization of heat transfer on thermal barrier coated gas turbine blade. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 -22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Abdul Latiff, Abdul Somad and Musa, Mukhtaruddin and Anhar, Zaki and Illias, Suhaimi and Ani, Mohd Hanafi (2020) Slagging of coal blends: comparison between pre-blended and in furnace blend. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand..

Abdul Najib Khan, A. Shafiq Khan and Othman, Nur Ezzah Faezah and Purwanto, Hadi and Abdul halim, Hafasihah and Shamsul Baharin, Ahmad Firdaus (2015) Synthetic of pure alumina from aluminum scrap. In: International Conference in Advances in Manufacturing And Materials Engineering, 23-25 sep 2014, Kuala Lumpur.

Abdul Rahman, Fariza and Ahmad, Zuraida and Iis, Sopyan (2010) Application of low cost polyurethane (PU) foam for fabricating porous tri-calcium phosphate (TCP). Journal of Biomimetics, Biomaterials and Tissue Engineering, 8. pp. 1-7. ISSN 1662-1018

Abdul Razak, Nur Humairah and Ahmad, Zuraida (2012) Properties of sago starch-nanoclay biocomposites film. Advanced Materials Research, 576. pp. 480-483. ISSN 1022-6680

Abdullahi, U. and Maleque, Md. Abdul and Nirmal, U. (2013) Wear mechanisms map of CNT-Al nano-composite. Procedia Engineering, 68. pp. 736-742. ISSN 1877-7058

Abdullahi, Umma and Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub and Nirmal, Umar (2020) Friction coefficient of carbon nanotube reinforced aluminium nano-composite. Nigerian Journal of Engineering, 27 (1). pp. 25-35. ISSN 0794-4756 E-ISSN 2705-3954

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2020) Hardness behaviour of carbon nanotube-aluminium nano-composite using nanoindentation technique. Materials Today: Proceedings, xx (xx). pp. 1-5. E-ISSN 2214-7853 (In Press)

Abdullrhman Hossin, Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2016) Surface modification of HSLA steel and its fracture behavior. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Abdulmumin, Adebisi Adetayo and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2015) Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite. Advanced Materials Research, 1115. pp. 174-177. ISSN 1022-6680

Abu Zarim, Faizal and Alaei, Iraj and Yaacob, Iskandar Idris (2011) Fabrication of nickel aluminide (Ni3Al) by hot isostatic pressing (HIP). In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 13-16. ISBN 9789674182311

Adebisi, A. A. and Maleque, Md. Abdul and Bello, K. A. (2016) Effect of stir casting process parameters on tribological performance of Al6061-SiCp composite. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Bello, Kamil Adeyemi (2016) Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces, 23 (6). pp. 533-547. ISSN 0927-6440 E-ISSN 1568-5543

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Bello, K.A. (2016) Investigation of parametric influence on the properties of Al6061-SiCp composite. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Gombak.

Adedi, Muhammad Rahman and Syed Mohamed Ali, Jaffar and Hrairi, Meftah (2019) A new higher order theory for analysis of orthotropic cylindrical shell under electromechanical load. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 749-753. ISSN 2249 – 8958

Adeleke, S. A. and Maleque, Md. Abdul (2015) TIG melted surface modified titanium alloy for cylinder liner application. International Journal of Automotive Engineering and Technologies, 4 (3). pp. 130-138. ISSN 2146-9067

Adeleke, S. A. and Sopyan, Iis and Bushroa, A. R. (2015) Hydroxyapaptite layer formation on titanium alloys surface using micro-arc oxidation. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10101-10108. ISSN 1819-6608

Adeleke, S.A. and Bushroa, A.R and Sopyan, Lis (2017) Characteristic features of plasma electrolytic treated layers in Na3PO4 solution. In: Advances in Material & Processing Technologies Conference 2017(AMPT 2016), 11th-14th December 2017, Chennai, India.

Adeleke, S.A. and Maleque, Md. Abdul (2015) Surface features of TIG melting coated CP-titanium. Advanced Materials Research, 1115. pp. 234-237. ISSN 1022-6680

Adeleke, S.A. and Maleque, Md. Abdul (2014) Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures. Advanced Materials Research, 1024. pp. 207-210. ISSN 1022-6680

Adeleke, Sakiru Adekunle and Bushroa, Abdul Razak and Sopyan, Lis (2017) Recent development of calcium phosphate based coating on titanium alloy implants. Surface Engineering and Applied Electrochemistry, 53 (5). pp. 419-433. ISSN 1068-3755 E-ISSN 1934-8002

Adeleke, Sakiru Adekunle and Ramesh, Singh and Bushroa, Abdul Razak and Ching, Yern Chee and Sopyan, Iis and Maleque, Md. Abdul and Krishnasamy, Sivakumar and Chandran, Hari and Misran, Halina and Ubenthiran, Sutharsini (2018) The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International, 44 (2). pp. 1802-1811. ISSN 0272-8842

Adeyemi, Bello K. and Maleque, Md. Abdul and Ahmad, Zuraida and Adebisi, Adetayo A. and Mirdha, S. (2015) Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. In: Malaysian International Tribology Conference 2015, 16th-17th Nov. 2015, Penang, Malaysia.

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Jawaid, Mohammad and Iqbal, Mohammad (2014) Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Composites: Part B: Engineering, 56. pp. 68-73. ISSN 1359-8368

Ahmad, Farah and Mohd Hatta, Maziati Akmal (2020) Bionanomaterial thin film for piezoelectric applications. In: Advances in nanotechnology and its applications. Springer, Singapore, Singapore, pp. 63-82. ISBN 978-981-15-4741-6

Ahmad, Mahmood and A. Al‑Zubi, Mohammad and Kubińska‑Jabcoń, Ewa and Majdi, Ali and Al-Mansob, Ramez Al-Ezzi Abduljalil and Sabri, Mohanad Muayad Sabri and Ali, Enas and Abdulrabb Naji, Jamil and Elnaggar, AshrafY and Zamin, Bakht (2023) Predicting California bearing ratio of HARHA‑treated expansive soils using Gaussian process regression. Scientific Reports, 13 (1). pp. 1-11. ISSN 2045-2322

Ahmad, Mahmood and Al-Mansob, Ramez and Jamil, Irfan and Al-Zubi, Mohammad A. and Sabri, Mohanad Muayad Sabri and Alguno, Arnold C. (2022) Prediction of rockfill materials’ shear strength using various kernel function-based regression models—a comparative perspective. Materials, 15 (5). pp. 1-15. E-ISSN 1996-1944

Ahmad, Mahmood and Al-Mansob, Ramez Al-Ezzi Abduljalil and Ramli, Ahmad Bukhari and Ahmad, Feezan and Jehan Khan, Beenish (2023) Unconfined compressive strength prediction of stabilized expansive clay soil using machine learning techniques. Multiscale and Multidisciplinary Modeling, Experiments and Design. pp. 1-15. ISSN 2520-8160 E-ISSN 2520-8179 (In Press)

Ahmad, Mahmood and Alsulami, Badr T. and Hakamy, Ahmad and Majdi, Ali and Alqurashi, Muwaffaq and Muayad Sabri Sabri, Mohanad and Al-Mansob, Ramez and Ibrahim, Mohd Rasdan (2023) The performance comparison of the decision tree models on the prediction of seismic gravelly soil liquefaction potential based on dynamic penetration test. Frontiers in Earth Science, 11. E-ISSN 2296-6463

Ahmad, Mahmood and Amjad, Maaz and Al-Mansob, Ramez and Kami ´nski, Paweł and Olczak, Piotr and Khan, Beenish Jehan and Alguno, Arnold C. and UNSPECIFIED (2022) Prediction of liquefaction-induced lateral displacements using Gaussian process regression. Prediction of Liquefaction-Induced Lateral Displacements Using Gaussian Process Regression. pp. 1-17. E-ISSN 2076-3417

Ahmad, Mahmood and Katman, HerdaYati and Al-Mansob, Ramez and Ahmad, Feezan and Safdar, Muhammad and Alguno, Arnold C. (2022) Prediction of rockburst intensity grade in deep underground excavation using adaptive boosting classifier. Complexity, 2022. pp. 1-10. ISSN 1076-2787 E-ISSN 1099-0526

Ahmad, Zuraida (2012) Surface properties and thermal behavior of Malaysian coir fiber. In: Materials in Engineering in Health Sciences. Universiti Sains Malaysia, Pulau Pinang, pp. 1-7. ISBN 978-983-861-533-4

Ahmad, Zuraida and A.K. , Ahmad Ulwi and T., Maisarah and A., Maisarah (2015) Characterization and preparation of sago starch (SS) based reinforced with silver nanoparticle (SNP). Advanced Materials Research, 1115. pp. 369-372. ISSN 1662-8985

Ahmad, Zuraida and Abdul Razak, Nur Humairah and Abdul Wahid, Nur Izwah and Zulkifli, Siti Naqiah (2012) The study of glycerol plasticized thermoplastic sago starch. Advanced Materials Research, 576. pp. 289-292. ISSN 1022-6680

Ahmad, Zuraida and Anuar, Hazleen (2011) Properties of compression moulding starch - nanoclay biocomposites. In: The 19th Annual International Conference on Composites/Nano Engineering (ICCE 19) , 27-30 July 2011, Shanghai, China. (Unpublished)

Ahmad, Zuraida and Anuar, Hazleen and Halim, Zahurin and Abang Haji Abdul Majid, Dayang Laila and Md Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials, 472-72. pp. 928-932. ISSN 1013-9826

Ahmad, Zuraida and Eslami, Fayezeh and Abdul Wahab, Ahsanul Khaliqin (2015) Swelling properties of gamma irradiated starch based hydrogel dressing. International Journal of Innovative Science, Engineering & Technology, 2 (8). pp. 933-936. ISSN 2348 – 7968

Ahmad, Zuraida and H, Anuar (2011) Properties of compression moulding starch-nanoclay biocomposites. World Journal of Engineering, 8 (Supp.1). pp. 1377-1378. ISSN 1708-5284 (Unpublished)

Ahmad, Zuraida and Hermain, Hazwan Yatimi and Abdul Razak, Nur Humairah (2015) Mechanical and physical properties of sago starch/halloysite nanocomposite film. Advanced Materials Research, 1115. pp. 394-397. ISSN 1662-8985

Ahmad, Zuraida and Khalid, Asad. A. and Ismail, Ahmad Faris (2007) Performance of hybrid filament wound composites tubes subjected to quasi static indention. Materials and Design, 28. pp. 71-77. ISSN 0261-3069

Ahmad, Zuraida and Omar, Nurizan (2011) The effects of chemical and mechanical treatments on coir fiber to mechanical properties of coir-albumen-concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 108-113. ISBN 9789674182311

Ahmad, Zuraida and Tajuddin, Maisarah and Maleque, Md. Abdul and Halim, Zahurin (2019) Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science, 15. pp. 49-61.

Ahmad, Zuraida and Teoh, Swin Le and Samannamunthaliar, Kumaran (2011) Thermal and morphological study of Biopolymer Cotton-Albumen Clay (BCAC) composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 62-67. ISBN 9789674182311

Ahmad, Zuraida and Yahaya, Insyirah and Tajuddin, Maisarah (2018) Morphological and thermal analysis of retted rattan waste fibers. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 403-409. ISSN 2581-4311

Ahmad, Zuraida and Yusof, Yusliza and Anuar, Hazleen and R., Mohd Khairul Muhaimin (2012) The effect of water and citric acid on sago starch bio-plastics. International Food Research Journal, 19 (2). pp. 715-719. ISSN 19854668 (P), 22317546 (O)

Ahmad, Zuraida and Yusof, Yusliza and Anuar, Hazleen and Razali, Muhammad Khairul Muhaimin (2011) The effect of water and citric acid on sago starch bio-plastics. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17 -19 May 2011, Kuala Lumpur, Malaysia. (In Press)

Ahmad, Zuraida and Yusof, Yusliza and Omar, Nurihan and Anuar, Hazleen and Halim, Zahurin and Samat, Noorasikin (2012) Properties of montmorillonite-reinforced thermoplastic sago starch composites. Advanced Materials Research, 445. pp. 469-474. ISSN 1022-6680

Ahmad, Zuraida and Z. N., Najiah and Abdul Razak, Nurhumairah and Sarifuddin, Norshahida (2014) Properties of thermoplastic starch/kenaf composite. Molecular Crystals and Liquid Crystals, 603 (1). pp. 173-179. ISSN 1542-1406 E-ISSN 1563-5287

Ahmad A. Shahrim, Nur’Aishah and Sarifuddin, Norshahida and Ismail, Hanafi (2018) Extraction and characterization of starch from mango seeds. In: Regional Conference on Materials and ASEAN Microscopy Conference 2017, RCM and AMC 2017, 12 - 13 December 2017, Penang; Malaysia.

Ahmad Azhar, Ahmad Zahirani and Kahlib, Nor Amyra Zulianey and Manshor, Hanisah and Wee, Sing Yeo and Mohd Ali, Afifah and Rejab, Nik Akmar and Ahmad, Zainal Arifin (2018) Effect of single walled carbon nanotube addition to the physical properties of monolithic alumina. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 585-590. E-ISSN 2581-4311

Ahmad Azhar, Ahmad Zahirani and Mohamad Shawal, Siti Hajar and Manshor, Hanisah and Mohd Ali, Afifah and Rejab, Nik Akmar and Chan Abdullah, Ezzat and Ahmad, Zainal Arifin (2019) The effects of CeO2 addition on the physical and microstructural properties of ZTA-TiO2 ceramics composite. Journal of Alloys and Compounds, 773. pp. 27-33. ISSN 0925-8388 E-ISSN 0925-8388

Ahmad Nawawi, Natasha and Ramesh, Singh and Hamdi, Mohd and Tan, Chou Young and Purbolaksono, Judha and Toulouei, Ranna and Sopyan, Iis (2014) Synthesis and properties of biphasic calcium phosphate prepared by different methods. Advanced Materials Research, 970. pp. 20-25. ISSN 1022-6680

Ahmad Shahrim, Nur’Aishah Ahmad and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Ahmad Azhar, Ahmad Zahirani (2018) The effects of glycerol addition to the mechanical properties of thermoplastic films based on jackfruit seed starch [Kesan penambahan gliserol pada sifat mekanik filem thermoplastik berdasarkan kanji biji nangka]. Malaysian Journal of Analytical Sciences, 22 (5). pp. 892-898. ISSN 1394-2506

Akhbar, Kaderi and Ani, Mohd Hanafi and Othman, Raihan and Mohd Zainal, Ahmad Zaki (2011) Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), 6-7th June 2011, Perbadanan Putrajaya Complex, Putrajaya. (Unpublished)

Al-Bat’hi, Souad A. M. and Ahmed, Nafees (2019) Fabrication and characterization of CNT/ZnO thin film junction for photovoltaic application. In: 7th International Conference on Nano and Materials Science, ICNMS 2019, 4- 7 January 2019, San Francisco; United States.

Al-Khateeb, Khalid A. Saeed and Al-Khateeb, Wajdi Fawzi Mohammed (2010) Design and performance analysis of VCO for standard GSM using MEMS. IIUM Engineering Journal, 11 (1). pp. 41-49. ISSN 1511-788X

Al-Khatib, Ma An Fahmi Rashid and Alam, Md. Zahangir and Mohammed Abd, Rasha (2010) Immobilization of cellulases enzyme on Carbon Nanotubes (CNTs) for cellulosic compounds degradation. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Al-Khatib, Ma An Fahmi Rashid and Mirghani, Mohamed Elwathig Saeed and Kudssiah, Esssam Yassin and Husain, Iman A. F. (2009) Immobilization of chitosan onto carbon nanotubes for lead removal from water. In: 3rd International Conference on Chemical & Bioprocess Engineering (ICCBPE-2009), 12–14th August 2009, Novotel Hotel, Borneo, Kota Kinabalu, Sabah. .

Al-Khatib, Ma An Fahmi Rashid and Mirghani, Mohamed Elwathig Saeed and Qudsieh, Isam Y. and Husain, Iman A. F. (2010) Immobilization of Chitosan onto Carbon Nanotubes for Lead Removal from Water. Journal of Applied Sciences, 10 (21). pp. 2705-2708. ISSN 1812-5654 (print), 1812-5662 (online)

Al-Mansob, Ramez A. and Oi, Mun Hoong and Wan Azahar, Wan Nur Aifa and Jing, Lin Ng and Alsharef, Jamal and Ali, Shaban (2021) The effect of carbon-nanofiber and hydrated lime on weak soil stability. Malaysian Construction Research Journal (MCRJ), 14 (Special Issue 3). pp. 1-11. ISSN 1985-3807 E-ISSN 2590-4140

Alaei, Iraj and Al bathi, Souad Ali Muhammad and Sopyan, Iis (2015) Fabrication and characterization of poly (ethylene oxide) for photo-electronic devices. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17239-17241. ISSN 1819-6608

Ali, Maisarah and Ahmad, Muhamad Zharif and Saad , Siti Asmahani (2015) Effect of polycarboxylate ether (PCE) addition to physical and mechanical characteristics of high performance concrete. Advanced Materials Research, 1115. pp. 146-149. ISSN 1022-6680

Ali, Maisarah and Nordin, Muhammad Hariz and Saad, Siti Asmahani (2015) Physical and mechanical properties of concrete incorporating manufactured sand. Advanced Materials Research , 1115. pp. 160-165. ISSN 1022-6680

Ali, Maisarah and Abdullah, Muhd Sufian and Saad , Siti Asmahani (2015) Effect of calcium carbonate replacement on workability and mechanical strength of Portland cement concrete. Advanced Materials Research, 1115. pp. 137-141. ISSN 1022-6680

Ali, Maisarah and Abdullah, Muhd Sufian and Saad, Siti Asmahani (2014) Effect of calcium carbonate replacement on workability and mechanical strength of portland cement concrete. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014) 23-25 September 2014, Kuala Lumpur, Malaysia, 23 - 25 September 2014, Kuala Lumpur. (Unpublished)

Ali, Maisarah and Fadzil, Mohd Syafiq and Saad, Siti Asmahani (2014) Effect of rice husk ash (RHA) on physical property and mechanical strength of concrete. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23 - 25 September 2014, Kuala Lumpur. (Unpublished)

Ali, Maisarah and Fadzil, Mohd Syafiq and Saad, Siti Asmahani (2015) Effect of rice husk ash (RHA) on physical property and mechanical strength of concrete. Advanced Materials Research, 1115. pp. 150-155. ISSN 1022-6680

Ali, Maisarah and Saad , Siti Asmahani and Khairuddin, Noor Farah Elyani and Sidek, Ammar Hamzi and Md. Salim, Muhammad Faiz (2015) Mechanical Properties of Bamboo Fibre Composite Incorporating Pulverized Fuel Ash. Advanced Materials Research, 1115. pp. 270-274. ISSN 1022-6680

Ali, Maisarah and Saad , Siti Asmahani and Khairuddin, Noor Farah Elyani and Sidek, Ammar Hamzi Sidek and Md. Salim, Muhammad Faiz (2014) Mechanical properties of bamboo fibre composite incorporating pulverized fuel ash. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and Suieb, Ali Nurhanim and Mohamad Asharaf, Asfana Banu (2016) Micro electro discharge machining of non-conductive ceramic using conductive powder mix dielectric fluid. Journal of Engineering and Applied Sciences, 11 (7). pp. 1469-1474. ISSN 1816-949X E-ISSN 1818-7803

Alias, Tuti Yasmin and Idris, Mohd Hasbullah and Ahmad, Zuraida and Ourdjini, Ali (2012) Rheological behavior and stability of cassava starch for ceramic mould binder application. Advanced Materials Research, 576. pp. 162-165. ISSN 1022-6680

Alkhatib, Ma'an and Salleh, Hamzah and Sultan, Anans M. (2008) Immbolization of lipase on multi-walled carbon nanotubes. In: 2008 International Conference on Environment (ICENV 2008), 15-17 December, 2008, G Hotel, Penang. (Unpublished)

Allujami, Hamzeh Marwan and Abdulkareem, Muyideen and Jassam, Taha M. and Al-Mansob, Ramez A. and Jing, Lin Ng and Ibrahim, Azmi (2022) Nanomaterials in recycled aggregates concrete applications: mechanical properties and durability. A review. Cogent Engineering, 9. ISSN 2331-1916

Allujami, Hamzeh Marwan and Abdulkareem, Muyideen and M.Jassam, Taha and Abduljalil Al-Mansob, Ramez Al-Ezzi and Ibrahim, Azmi and Jing, Lin Ng and Hok, Chai Yam (2022) Mechanical properties of concrete containing recycle concrete aggregates and multi-walled carbon nanotubes under static and dynamic stresses. Case Studies in Construction Materials, 17. pp. 1-18. ISSN 2214-5095

Alqap, Asep Sofwan Faturohman and ., Nor Hidayu and Sopyan, Iis (2011) Synthesis and characterization of sol-gel method derived zinc doped hydroxyapatite powder. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 161-166. ISBN 9789674182311

Alqap, Asep Sofwan Faturohman and Sopyan, Iis and Mazmaa, Nuur Izzati (2011) Manganese doped hydroxyapatite powder through hydrothermal method. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 155-160. ISBN 9789674182311

Aminanda, Yulfian and Castanie, Bruno and Barrau, Jean-Jacques and Thevenet, Pascal (2009) Experimental and numerical study of compression after impact of sandwichs structures with metallic skins. Composites Science and Technology, 69 (1). pp. 50-59. ISSN 0266-3538

Amir, Adibah and Mamat, Othman (2014) Effects of SiO2 particles in mechanical properties of iron composite. Applied Mechanics and Materials, 465-466. pp. 886-890. ISSN 1662-7482

Amir, Adibah and Mamat, Othman (2014) Wear behaviour of powder metallurgy iron composite reinforced with 20wt.% silica particles. International Journal of Fracture Fatigue and Wear, 2. pp. 314-319. ISSN 2294-7868

Amir, Adibah and Mamat, Othman (2011) A review of wear mechanisms of ceramic-reinforced metal-matrix composite: case study of nano silica reinforced iron. Defect and Diffusion Forum, 319-320. pp. 77-84. E-ISSN 1662-9507

Anhar, Zaki and Musa, Muktaruddin and Illias, Suhaimi and Ani, Mohd Hanafi (2020) A review of current prediction methods for slagging and fouling in Malaysian coal fired power plants. Test Engineering & Management, 83 (May-June). pp. 1411-1418. ISSN 0193-4120

Ani, Mohd Hanafi and Azman, M. A. F. and Musa, Mukhtaruddin and Anhar, Zaki and Abdul Hamid, Abd. Malek (2020) High temperature cathodic protection of Fe-Cr alloy. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th Feb. 2020, Bangkok, Thailand..

Ani, Mohd Hanafi and Helmi, F and Herman, Sukreen Hana and Syed Abu Bakar, Syed Noh (2018) Resistive switching of Cu/Cu2O junction fabricated using simple thermal oxidation at 423 K for memristor application. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Ani, Mohd Hanafi and Kamarudin, Mohd Syahidan and Ramlan, A H and Ismail, Edhuan and Sirat, Mohd Shukri and Mohamed, Mohd Ambri and Mohd Abid, Mohd Asyadi Azam (2018) A critical review on the contributions of chemical and physical factors toward the nucleation and growth of large-area graphene. Journal of Materials Science, 53 (10). pp. 7095-7111. ISSN 0022-2461 E-ISSN 1573-4803

Ani, Mohd Hanafi and Kodama, Toshiya and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2009) The effect of water vapor on high temperature oxidation of Fe-Cr alloys at 1073K. Materials Transactions, 50 (11). pp. 2656-2663. ISSN 1347-5320 (O), 1345-9678 (P)

Ani, Mohd Hanafi and Setiawan, Asep Ridwan and Hens, Saputra and Othman, Raihan and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Increase of oxygen permeability on metal/oxide interface during high temperature oxidation of Fe-Cr alloys in water vapor at 1073 K. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu. (Unpublished)

Ani, Mohd Hanafi and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Evaluation of oxygen surface potential at early stage of oxidation in dry and water vapor condition at 1073 K. In: International Symposium on High Temperature Oxidation and Corrosion (ISHOC) 2010, 8-11th November 2010, Zushi, Japan. (Unpublished)

Ani, Mohd Hanafi and Zaharudin, M. Z. and Anhar, Zaki and Musa, Mukhtaruddin and Abdul Hamid, Abd. Malek (2020) Accelerates high temperature oxidation due to the change of Schottky’s Barrier Height of Cr2O3 layer in humid condition. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand.

Ani, Mohd Hanafi and Zulkeflee, Muhammad Zakhuan and Kaderi, Akbar and Sutjipto, Agus Geter Edy and Salim, Nurjannah (2022) Multiwall carbon nanotubes based triboelectric nanogenerators. Materials Science Forum, 1056. pp. 33-38. ISSN 1662-9752

Ariff, Tasnim Firdaus and Al-Qwairi, Osamah Omar (2020) Mechanical and structural properties of the butt welded joint in high strength structural steel (ST52-3) using gas metal arc welding and oxyfuel gas welding. TEST Engineering and Management, 83 (May – June 2020). 1446 -1450. ISSN 0193-4120

Ariff, Tasnim Firdaus and Zakaria, Azriena Nathasa (2023) Mechanical and structural properties of epoxy bio-composite using fish bones as bio-filler. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, KualaLumpur.

Arifin, Mohd Azmir and Mel, Maizirwan and Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Mohd. Salleh, Hamzah and Sopyan, Iis (2017) Different oxidation treatments on polystyerene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of the Pakistan Academy of Sciences: B. Life and Ennvironmental Sciences, 54 (1B). pp. 55-59. ISSN 2518-4261 E-ISSN 2518-427X

Arifin, S. K. and Abdul Hamid, Abd. Malek and Berahim, Ahmad Nukhaie and Ani, Mohd Hanafi (2017) Effects of water vapor on protectiveness of Cr2O3 scale at 1073 k. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Arifutzzaman, A. and Maleque, Md. Abdul and Debnath, Sujan (2012) The crystallinity and hardness properties of Al-Cu/SiCp new composite materials. Advanced Materials Research, 576. pp. 450-453. ISSN 1022-6680

Ascroft, Helen and Barnes, Stuart and Dahnel, Aishah Najiah and Gupta, Aniruddha and Abd Halim, Nor Farah Huda and Ray, David (2016) Ultrasonic assisted machining. In: The 17th International Conference on Machine Design and Production, 12th - 15th July 2016, Bursa, Turkiye.

Asmawi, R. and Ibrahim, M.H.I. and Amin, A. M. and Mustapha, N. and Sopyan, Iis (2015) Synthesis and characterization of nanocrystalline hydroxyapatite powder. Advanced Materials Research, 1087. pp. 142-146. ISSN 1022-6680

Azhari, Azmir and Idriss, A. N. M. and Maleque, Md. Abdul (2023) Comparative study on performance characteristics of modified alloy steels by TIG and water jet peening processes. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9—10 August, 2022, Kuala Lumpur, Malaysia.

Azman, Mohd Farizul and Yahya, Azmi and Purwanto, Hadi (2013) Effect of Numbers of Fringing Electric Field (FEF) Fingers on the Performance of Sensor for Water Content in Soil. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 46-49. ISSN 1793-8198

B

Bakri, Jufriadi and Sutjipto, Agus Geter Edy and Othman, Raihan and Muhida, Riza (2009) Discharge, microstructural and mechanical properties of ZrO2 addition on MgO for plasma display panel materials. Materials Research Innovations, 13 (3). pp. 149-152. ISSN 1433-075X

Bakri, Jufriadi and Sutjipto, Agus Geter Edy and Othman, Raihan and Muhida, Riza (2011) Microstructure and electrical properties of AZO films prepared by RF magnetron sputtering. Advanced Materials Research, 264-65. pp. 754-759. ISSN 1662-8985

Banu, Asfana and Ali, Mohammad Yeakub and Abd Rahman, Md Nizam and Konneh, Mohamed (2019) Investigation of process parameters for stable micro dry wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, 103 (1-4). pp. 723-741. ISSN 0268-3768 E-ISSN 1433-3015

Bello, K. A. and Maleque, Md. Abdul and Adebisi, A. A. (2016) Dry sliding wear characterization of TIG embedded composite coatings using Taguchi based grey relational analysis approach. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

Bello, K. A. and Maleque, Md. Abdul and Adebisi, A. A. and Dube, A. (2016) Preparation and characterisation of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. Transactions of the IMF : The International Journal of Surface Engineering and Coatings, 94 (4 (Special Issue: MITC special issue - Coatings for Tribology)). pp. 211-221. ISSN 0020-2967 E-ISSN 1745-9192

Bello, Kamilu Adeyemi and Dodo, Rayyan Mamuda and Babaswasun, Muhammad Sani and Umma, Abdullahi and Adebisi, Abdulmumin Adetayo and Maleque, Md. Abdul (2022) Effect of two-step austempering heat treatment on the dry sliding wear behavior of austempered ductile cast iron. In: 37th Annual Conference and Annual General Meetings, 26th - 29th October 2022, University of Abuja, Nigeria.

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and S. , Mirdha (2015) Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach. Advanced Materials Research, 1115. pp. 238-242. ISSN 1022-6680

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and S. , Mirdha (2015) Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research, 1115. pp. 166-169. ISSN 1022-6680

Berahim, A N and Zaharudin, M Z and Ani, Mohd Hanafi and Arifin, S K (2018) Effect of dissolved hydrogen on Schottky barrier height of Fe-Cr alloy heterojunction. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Bhuiyan, Md. Moinul Islam and Unno, Toshinori and Yokoyama, Yoshihiko and Toriyama, Toshiyuki and Sugiyanta, Susumu (2000) Micro connector fabricated by micro process technology. In: International Symposium on Micromechatronics and Human Science, 22-25 Oct 2000, Kawasaki, Japan.

Bhuiyan, Moinul (2010) Development and optimization of High-Hertz stress contact to reduce future contact material cost. In: Tyco Electronics Technical Conference 2010, 18-20 October 2010, San Jose, USA. (Unpublished)

Bhuiyan, Moinul (2010) Development of low normal force contact with stable performance. In: Tyco Electronics Japan Technical Conference 2010, October 2010, Kawasaki, Japan. (Unpublished)

Bhuiyan, Moinul and Alamgir, Tarik and Bhuiyan, Munira and Kajihara, Masanori (2013) MEMS and EFF technology based micro connector for future miniature devices. IOP Conference Series: Materials Science and Engineering, 53. 012063-1. ISSN 1757-8981

Bhuiyan, Moinul and Alamgir, Tarik Bin and Bhuiyan, Munira and Kajihara, Masanori (2013) Development of a high hertz-stress contact for conventional batch production using a unique scribing technology. IOP Conference Series: Materials Science and Engineering, 53 (012068). ISSN 1757-8981

Bhuiyan, Moinul and Haga, Yoichi and Makishi, Wataru and Esashi, Masayoshi (2003) Development of optical switch for indoor LAN using SMA coil and magnetic latch. In: 20th Sensor Symposium 2003, 23-24 Jul 2003, Tokyo, Japan.

Bhuiyan, Moinul and Yamada, Shinji and Kurokawa, Noriharu and Sakamoto, Katsuhiko and Takemasa, Eiichiro (2008) Development of low normal force contact using electro fine forming and lithography technology. In: Tyco Electronics Technical Conference 2008, 14-16 Oct 2008, Shanghai, China. (Unpublished)

Bouleghebar, Yasmina and Bentchikou, M. and Boukendakdji, O. and El-Hadj, K. and Debieb, F. and Ali, Maisarah (2023) The effect of brick and glass powder on the mechanical properties and porosity of self-compacting mortar. Journal of Applied Engineering Sciences, 13 (1). pp. 39-52. ISSN 2247-3769 E-ISSN 2284-7197

C

Castanie, Bruno and Aminanda, Yulfian and bouvet, christophe and barrau, jean-jacques (2008) Core crush criterion to determine the strength of sandwich composite structures subjected to compression after impact. Composite Structures, 32 (3). pp. 1-8. ISSN S0263-8223(08)00086-X

Che Daud, Mohd Radzi and Alies, Shamin Asyrani and Saleh, Norhayati (2011) Cost comparison analysis between strip to coil for support brake pedal at Suria Component (M) Sdn. Bhd. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 92-97. ISBN 9789674181598

Che Daud, Mohd Radzi and Mat Song, Rusdi (2011) Study the adherence of the values in the ISO 9001:2000 certified companies in Malaysia. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 84-90. ISBN 9789674181598

Che Deraman, Siti Noratikah and Abdul Rashid, Muhammad Afif Daniel and Saad, Siti Asmahani and Md.Husain, Nadiah and Masjuki, Siti Aliyyah (2021) Effects of durian sawdust as a partial replacement of fine aggregate in concrete. In: 3rd International Symposium on Civil and Environmental Engineering (ISCEE 2020) 1st-2nd December 2020, Batu Pahat,Johor, Malaysia, 1st-2nd December 2020, Virtual Conference.

Che Murad, Mardziah and Masdek, Nik Rozlin and Hyie, Koay Mei and Sopyan, Lis (2017) Physicochemical characteristics of magnesium hydroxyapatite (MgHA) derived via wet precipitation method. Journal of Mechanical Engineering, SI 4 (5). pp. 209-216. ISSN 1823-5514

Chou Yong, Tan and Singh, Ramesh and Khai Liang, Aw and Wei Hong, Yeo and Sopyan, Iis and Wan Dung, Teng (2009) Sintering behavior of hydroxyapatite ceramics prepared by different routes. In: 33rd International Conference & Exposition on Advanced Ceramics and Composites 2009, 18 - 23 January 2009, Daytona Beach, FL, United States.

D

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2016) The effect of varying cutting speeds on tool wear during conventional and Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC) and titanium alloy stacks. In: 7th CIRP Conference on High Performance Cutting, HPC 2016, 31st May-2nd June 2016, Chemnitz; Germany.

Dahnel, Aishah Najiah and Barnes, Stuart and Ascroft, Helen and Gloger, Maximilian (2015) Analysis of tool wear and hole quality during Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC)/titanium alloy (Ti6Al4V) stacks. In: ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, 13th-19th November 2015, Houston, Texas, USA.

Dahnel, Aishah Najiah and Barnes, Stuart and Bhudwannachai, Pipat (2014) Drilling of carbon fibre composites: a review. In: 1st International Manufacturing Engineering Conference (iMEC) 2013, 1st-3rd July 2013, Gambang, Kuantan, Pahang.

Dahnel, Aishah Najiah and Barnes, Stuart and Bhudwannachai, Pipat (2013) Experimental analysis of tool wear when drilling carbon fibre composite (CFC) without cutting fluid, with cutting fluid and with a pre-cryogenically cooled tool. In: 2nd International Conference on Advanced Materials Design and Mechanics (ICAMDM 2013), 17th-18th May 2013, Kuala Lumpur.

Dahnel, Aishah Najiah and Barnes, Stuart and Kibbler, Christopher and Ascroft, Helen (2015) Study of cutting forces and surface roughness in milling of Carbon Fibre Composite (CFC) with conventional and pressurized CO2 cutting fluids. In: ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, 13th-19th November 2015, Houston, Texas, USA.

Debnath, Sujan and Chee, Won Yeo and Rahman, Muhammad Ekhlasur and Reddy, Moola Mohan and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2012) Aluminum-silicon carbide composites for enhanced physio- mechanical properties. Advanced Materials Research, 576. pp. 370-373. ISSN 1022-6680

E

Edy Sutjipto, Agus Geter and Faris, Waleed Fekry and Adesta, Erry Yulian Triblas and Hanim, Hafizah (2011) Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator. Applied Mechanics and Materials, 84-85. pp. 392-395. ISSN 1660-9336

Esalami, Fayezeh and Ahmad, Zuraida and Abdul Razak, Nur Humairah (2015) Gamma irradiated starch based hydrogel impregnated with silver nanoparticle. Advanced Materials Research, 1115. pp. 390-393. ISSN 1022-6680

Eusuf, Muhammad Abu and Hasan, Abdullah Al (2013) Study the heat sink potential of building ground floor slab integrated with ELT. Applied Mechanics and Materials, 268-70. pp. 967-973. ISSN 1660-9336

Eusuf, Muhammad Abu and Hasan , Abdullah Al (2013) Study the thermal impact of massive waste material to building construction. Applied Mechanics and Materials, 268-70. pp. 945-951. ISSN 1660-9336

Eusuf, Muhammad Abu and Ibrahim, Mansor and Islam, Rafikul (2012) The construction and demolition wastes in Klang Valley, Malaysia. PLANNING MALAYSIA - Journal of the Malaysian Institute of Planners, X . 99 -124. ISSN 1675-6215

Eusuf, Muhammad Abu and Jahn Kassim, Puteri Shireen and Ibrahim, Mansor (2008) Study the performance of porous pavement on urban thermal environment. Part 1: Field observation. In: Micra 2008, 18- 21 June 2008, KAED Building. (Unpublished)

Eusuf, Muhammad Abu and Mamun, Abdullah Al and Salleh, Md. Noor and Ibrahim, Mansor and Mohd. Din, Shamzani Affendy and Abdul Rahim, Asiah (2016) Adapt engineering theory in universal design for developing countries: a literature review. Journal of Universal Design in the Built Environment (JUDBE), 2 (2). pp. 61-72. ISSN 2462-1668

F

F, Farah Alia and Kurniawan, Tedi and Asmara, Yuli Panca and Ani, Mohd Hanafi and Nandiyanto, Asep Bayu Dani and UNSPECIFIED (2017) High temperature oxidation in boiler environment of chromized steel. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1-2 Aug 2017, Kuantan, Pahang.

Fauzi, Fatin Bazilah and Ani, Mohd Hanafi and Herman, Sukreen Hana and Mohamed, Mohd Ambri (2018) Dilute electrodeposition of TiO2 and ZnO thin film memristors on Cu substrate. In: 6th International Conference on Electronic Devices, Systems and Applications 2017 (ICEDSA 2017), 8-9 August 2017, Kuching, Sarawak, Malaysia.

Fauzi, Fatin Bazilah and Ani, Mohd Hanafi and Othman, Raihan and Ahmad Azhar, Ahmad Zahirani and Mohamed, Mohd Ambri and Herman, Sukreen Hana (2015) Fabrication of flexible Au/ZnO/ITO/PET memristor using dilute electrodeposition method. In: 4th International Conference on Electronic Devices, Systems and Applications 2015 (ICEDSA), 14th - 15th December 2014, Kuala Lumpur.

Fauzi, Fatin Bazilah and Ismail, Edhuan and Syed Abu Bakar, Syed Noh and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Md Din, Muhammad Faiz and Illias, Suhaimi and Ani, Mohd Hanafi (2019) The role of gas-phase dynamics in interfacial phenomena during few-layer graphene growth through atmospheric pressure chemical vapour deposition. Physical Chemistry Chemical Physics, 22 (6). pp. 3481-3489. ISSN 1463-9076 E-ISSN 1463-9084

Fauzi, Fatin Bazilah and Othman, Raihan and Mohamed, Mohd Ambri and Herman, Sukreen Hana and Ahmad Azhar, Ahmad Zahirani and Ani, Mohd Hanafi (2015) Transition metal oxide (TMO) thin film memristor on cu substrate using dilute electrodeposition method. Materials Transactions, 56 (8). pp. 1302-1306. ISSN 1347-5320 (O), 1345-9678 (P)

Fidrusli, Azreen and Suryanto, Suryanto and Mahmood, Mahmood Hameed (2017) Ginger extract as green corrosion inhibitor of mild steel in hydrochloric acid solution. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Fuhaid, Mutlag Sh. and Maleque, Md. Abdul and Venkat, Murali and Abd. Rahman, Mohamed (2021) Natural and industrial origin reinforced LM6 aluminum matrix composite materials – a comparative study. In: International Conference on Recent Innovations in Science and Technology (RIST 2021), 19-20 June 2021, Virtual. (In Press)

G

Ghazali, Aimi Shazwani and Ham, Jaap and Markopoulos, Panos P. and Barakova, Emilia (2019) Investigating the effect of social cues on social agency judgement. In: 14th Annual ACM/IEEE International Conference on Human-Robot Interaction, HRI 2019, 11-14 March 2019, Daegu, Korea (South), Korea (South).

Gunawan, Gunawan and Sopyan, Iis and Nurfaezah, Siti and Ammar, Mohd (2013) Development of triphasic calcium phosphate–carbon nanotubes (HA/TCP-CNT) composite: a preliminary study. Key Engineering Materials, 531-32. pp. 258-261. ISSN 1013-9826

Gunawan, Teddy Surya and Anuar, Muhamad Hadzir and Kartiwi, Mira and Janin, Zuriati (2019) Design of power factor meter using internet of things for power factor improvement, remote monitoring and data logging. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). pp. 700-709. ISSN 2502-4752 E-ISSN 2502-4760

H

H, Lailatul and Maleque, Md. Abdul (2017) Hardfacing of duplex stainless steel using melting and diffusion processes. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md Mujibur (2017) Calcium phosphate cement for bone filler applications. Journal of Advanced Research in Materials Science, 39 (1). pp. 20-31. ISSN 2289-7992

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md Mujibur and Singh, Ramesh Kishore (2017) Novel injectable calcium phosphate bone cement from wet chemical precipitation method. In: 2nd International Conference on Materials Engineering and Nanotechnology, ICMEN 2017, 12-14 May 2017, Kuala Lumpur; Malaysia.

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Mujibur (2018) Antiwashout behavior of calcium phosphate cement incorporated with poly(ethylene glycol). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Haiza, Haroon and Yaacob, Iskandar Idris and Ahmad Azhar, Ahmad Zahirani (2016) Effect of citrate concentration on colloidal gold (Au) nanoparticles produced using electro-dissolution-reduction method. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, Selangor.

Haiza, Haroon and Yaacob, Iskandar Idris and Ahmad Azhar, Ahmad Zahirani (2018) Thermal conductivity of water based magnetite ferrofluids at different temperature for heat transfer applications. In: International Conference on Sustainable Materials, ICoSM 2018, 16th Apr. 2018, Bangkok, Thailand.

Haji Hassan, Masjuki and M., Gulzar and M. A., Kalam and N. W. M., Zulkifli and Maleque, Md. Abdul and M. S. S., Malik and A., Arslan (2023) Engine tribology: enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings: Technologies and Applications. CRC Press, Boca Raton, pp. 221-254.

Halim, Zahurin and Ahmad, Zuraida and Md Yusof, Fauziah (2011) Investigation on the effect of water immersion on cotton albumen composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 178-181. ISBN 9789674182311

Halim, Zahurin and Ahmad, Zuraida and Sharif, Safian and Kalam, Anizah (2017) Investigation of surface degradation of binderless particleboards (BPB) by utilizing rattan furniture waste materials. Project Report. UNSPECIFIED. (In Press)

Halim, Zahurin and Basri, Shahnor and Ajir, Mohd Ramli (2011) Numerical and experimental investigation of peel strength of composite sandwich structures. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 182-189. ISBN 9789674182311

Halim, Zahurin and Othman, Maizatulnisa and Abdul Rahman, Siti Khadijah (2015) SEM analysis of kenaf sandwich panel. Advanced Materials Research, 1115. pp. 300-303. ISSN 1662-8985

Halim, Zahurin and Taib, Meor Mohd Adli (2011) Finite element analysis of interlaminar stresses in edge delamination. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 190-195. ISBN 9789674182311

Hamdan, A B and Suryanto, Suryanto and I. Haider, Farag (2017) Study on tea leaves extract as green corrosion inhibitor of mild steel in hydrochloric acid solution. In: International Conference on Chemistry and Material Science (IC2MS) 2017, 8-9 August 2017, Kuala Lumpur, Malaysia.

Hameed, Hameed Mahmood and Harun, Nurliyana and -, Suryanto and Hilmy, Irfan (2014) Physical properties of electroless nickel-tungsten coating on mild steels obtained from acetic bath. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Hamidon, R. and Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohammad Yuhan (2016) Influence of cutting parameters on cutting force and cutting temperature during pocketing operations. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 453-459. ISSN 1819-6608

Haneef, I.N.H.M. and Buys, Yose Fachmi and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri and Muhamad Khairussaleh, Nor Khairusshima (2018) Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. In: 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM 2018), 27th-29th November 2018, Penang, Malaysia.

Haque, Md. Mohafizul and Hussein, Nur Izan Syahriah and Ismail, Ahmad Faris (2006) Effect of silicon on strength and fracture surfaces of aluminium–silicon casting and heat treated alloys. Key Engineering Materials, 306/8. pp. 893-898. ISSN 1013-9826

Haque, Md. Mohafizul and Ismail, Ahmad Faris (2008) Effect of cooling rate on strength and fracture surfaces of alpha brass casting. In: 7th International Conference on Fracture and Strength of Solids, FEOFS 2007; Urumqi; China;, 27 -29 August 2007, Urumqi, China.

Haque, Md. Mohafizul and Ismail, Ahmad Faris (2005) Effect of superheating temperatures on microstructure and properties of strontium modified aluminium–silicon eutectic alloy. Journal of Materials Processing Technology, 162/3. pp. 312-316. ISSN 0924-0136

Haruman, E. and Widhi, K. and Sutjipto, Agus Geter Edy and Mridha, Shahjahan and Sun, Y. (2006) Structural and wear and characteristic of low temperature nitrided stainless steel. Jurnal Teknologi, XX (3). pp. 209-214. ISSN 2180–3722 (O), 0127–9696 (P)

Hassan, Noor Azlina and Hassan, Norita and Ahmad, Sahrim and Rasid, Rozaidi (2011) The effect of processing parameters on tensile properties Empty Fruit Bunch (EFB) fiber reinforced thermoplastic natural rubber composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 150-154. ISBN 9789674182311

He, Yunze and Gao, Bin and Sophian, Ali and Yang, Ruizhen (2017) Transient electromagnetic-thermal nondestructive testing. Elsevier, United Kingdom. ISBN 9780128127872

Heraiz, M and Sahnoune, F and Hrairi, Meftah and Saheb, Nouari and Ouali, A (2016) Kinetics of mullite formation from kaolinite and boehmite. Molecular Crystals and Liquid Crystals, 628 (1). pp. 55-64. ISSN 1542-1406 E-ISSN 1563-5287

Hisham, Firzanah and Mohd Hatta, Maziati Akmal and Ahmad, Farah and Ahmad, Kartini and Samat, Noorasikin (2023) Biopolymer chitosan: potential sources, extraction methods, and emerging applications. Biopolymer chitosan: Potential sources, extraction methods, and emerging applications. pp. 1-11. ISSN 2090-4479 E-ISSN 2090-4495 (In Press)

Hj. Mohd. Noor, Norzailawati and Roslan, Shairatul Akma and Md Ali, Zuraini (2015) Analysis of shrines properties using remote sensing approach: case study of Lembah Bujang. In: 13th International Congress of Asian Planning Schools Association (APSA 2015). , 12th-14th August 2015 , Johor Bahru, Johor. (Unpublished)

Hrairi, Meftah and Ahmed, Mirghani Ishak and Nimir, Yassin (2009) Compaction of fly ash–aluminum alloy composites and evaluation of their mechanical and acoustic properties. Advanced Powder Technology, 20 (6). pp. 548-553. ISSN 0921-8831

I

Ibrahim Exstara, Luqman Hakim and Ayob, Mohd Fairullazi (2023) Recycled bricks as an alternative construction materials in the Malaysian construction industry. In: INTERNATIONAL COMPETITION ON SUSTAINABLE EDUCATION 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Ismail, Ahmad Faris and Anuar, Asnida and Walvekar , Rashmi Gangasa and Yusaf, Talal F. (2014) Corrosion effects of CNT-nanofluids on different metals. WIT Transactions on Engineering Sciences, 87. pp. 139-146. ISSN 1743-3533

Ismail, Edhuan and Sirat, Mohd Shukri and Abdul Hamid, Abdul Malek and Othman, Raihan and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2017) Synthesis of large-area few-layer graphene by open-flame deposition. Sains Malaysiana. ISSN 0126-6039

Ismail, Roslina and Yaacob, Iskandar Idris (2011) Fabrication of nickel aluminide intermetallic-alumina nanocomposite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 172-177. ISBN 9789674182311

Ismail, Roslina and Yaacob, Iskandar Idris (2011) Synthesis and characterization Of nanocrystalline Ni3Al intermetallic produced by mechanical alloying and reaction synthesis. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 23-28. ISBN 9789674182311

J

Jamal, Nur Ayuni and Yusof, Farazila and Ahmad Nor, Yusilawati and Nordin, Norhuda Hidayah and Sulaiman, Suraya (2022) Assisting liquid phase sintering of pure aluminum (Al) by the tin addition. In: Aluminium Alloys: Design and Development of Innovative Alloys, Manufacturing Processes and Applications. IntechOpen, London, United Kingdom, pp. 99-113. ISBN 978-1-83968-730-3

Jimat, Dzun Noraini and Sulaiman, Sarina and Ariffin, Faridah (2016) Characterization of biodegradable composite based on polycaprolactone/starch reinforced with sugarcane bagasse microfibrillated cellulose. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Johar, Firdaus and Ariff, Tasnim Firdaus (2022) Mechanical and microstructural properties of hybrid bio-composites using microwaved coconut fibre and rice husk. In: 2nd International Conference on Recent Trends in Applied Research, ICoRTAR 2021, 8-9 October 2021, Online.

Johari, Norhasnidawani and Abd. Rahim, Safiyah Hazwani and Halim, Zahurin (2011) Mechanical behaviour of eco core composite sandwich structure. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 40-44. ISBN 9789674182311

Johari, Norhasnidawani and Hassan, Noor Azlina (2020) Effect of ZnO-SiO2 nanoparticles on the morphology of nanocoating. Test Engineering and Managemant, 83. pp. 1215-1218. ISSN 0193-4120

Juhar, M Z F and Mohamad, M Sofwan and Illias, Suhaimi and Amin, N A M and Hussain, S and Ani, Mohd Hanafi (2023) Maximum spreading diameter of a water droplet after impact on a hot surface beyond Leidenfrost temperature. In: 8th International Conference on Applications and Design in Mechanical Engineering (ICADME 2023), 4th - 5th September 2023, Kuala Lumpur, Malaysia.

K

Kahar, A.M.W. and Sarifuddin, Norshahida and Ismail, Hanafi (2017) Structural, thermal and physico‑chemical properties of high density polyethylene/natural rubber/modified cassava starch blends. Iranian Polymer Journal, 26 (2). pp. 149-159. ISSN 1026-1265 E-ISSN 1735-5265

Kahlib, Nor Amyra Zulianey and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina (2017) Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 7 (Issue 1). pp. 19-24. ISSN 2462-1943

Kahlib, Nor Amyra Zulianey and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina (2017) Synthesis and characterization of silica ceramic membranes via sol-dip coating. Journal of Advanced Research in Materials Science, 39 (1). pp. 1-7. ISSN 2289-7992

Kahlib, Nor Amyra Zulianey and Wan Mazlan, Wan Amirah and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina and Nor Hairin, Assayidatul Laila (2018) Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 378-383. ISSN 2581-4311

Kaiser, Mohammad Rejaul and Anuar, Hazleen and Maleque, Md. Abdul (2010) Fabrication of biodegradable composite – an implication of plasticizer. In: National Conference in Mechanical Engineering for Research and Postgraduate Studies 2010 (NCMER 2010), 31 May-1 June 2010, Pekan, Pahang.

Kamarudin, Siti Hasnah and Rayung, Marwah and Abu, Falah and Ahmad, So’bah and Fadil, Fatirah and Abdul Karem, Azrena and Norizan, Mohd Nurazzi and Sarifuddin, Norshahida and Mat Desa, Mohd Shaiful Zaidi and Mohd Basri, Mohd Salahuddin and Samsudin, Hayati and Abdullah, Luqman Chuah (2022) A review on antimicrobial packaging from biodegradable polymer composites. Polymers, 14 (1). pp. 1-29. ISSN 2073-4360

Kawamura, Kenichi and Ani, Mohd Hanafi and Ueda, Mitsutoshi and Maruyama, Toshio (2010) The oxygen potential on the scale surface of alloys at high temperature oxidation. Netsu Sokutei : Calorimetry and Thermal Analysis, 38 (2). pp. 54-57.

Khamis, Siti Salwa and Purwanto, Hadi and Mohd Salleh, Hamzah and Abd. Rahman, Mohamed and Rozhan, Alya Naili (2020) New approach of Municipal Solid Waste (MSW) leachate treatment using hydrothermal method. TEST Engineering & Management, 83. pp. 1117-1121. ISSN 0193-4120

Khan, Md. Ashikur Rahman and Maleque, Md. Abdul and Rahman, M.M. Hafizur and Kadirgama, K. and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5 (2). pp. 503-507. ISSN 2010-376X E-ISSN 2010-3778

Konneh, Mohamed and Sudin, Izman and Kassim, Abdullah Abdul Rahman (2015) Milling damage on carbon fibre reinforced polymer using tiAIN coated end mills. Journal of Physics: Conference Series, 628 (Con. 1). pp. 1-8. ISSN 1742-6588 E-ISSN 1742-6596

L

Lailatul, P.H. and Maleque, Md. Abdul (2017) Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Material & Processing Technologies Conference, Chennai, India.

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Ginta, Turnad Lenggo (2009) Hot machining of hardened steels with coated carbide inserts. American Journal of Engineering and Applied Sceices, 2 (2). pp. 421-427. ISSN 1941-7020

Leman, Zulkiflle and Sapuan, Salit Mohd and Azwan, M. and Ahmad, Megat Mohamad Hamdan Megat and Maleque, Md. Abdul (2008) The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polymer - Plastics Technology and Engineering, 47 (6). pp. 606-612. ISSN 0360-2559

Lutpi, Husniyah Aliyah and Anuar, Hazleen and Mohamed, Mohd Ambri and Mohd. Salit, Sapuan (2016) Potential of irradiated high density polyethylene/ethylene propylene rubber-carbon nanotube nanocomposite as shoe sole. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 230 (2). pp. 100-110. ISSN 1754-3371

M

M. H. A, Musa and Maleque, Md. Abdul and Ali, M. Y. (2017) Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur.

M.Al-Sabaeei, Abdulnaser and Al-Fakih, Amin and Noura, Sajjad and Yaghoubi, Ehsan and Alaloul, Wesam and Al-Mansob, Ramez A. and Imran Khan, Muhammad and Shehu Aliyu Yaro, Nura (2022) Utilization of palm oil and its by-products in bio-asphalt and bio-concrete mixtures: a review. Construction and Building Materials. ISSN 0950-0618/ (In Press)

Mahdan, Mohd Haidil Akmal and Abidin, Nur Syahirah and Mohd Zaidi, Nur Ain Athirah and Sulaiman, Ahmad Syahrizan (2022) Combined effect of acidic beverages and immersion time on bonding strength of composite to enamel: an in-vitro study. Asian Journal of Dental Science, 5 (4). pp. 101-110.

Mahmood, M. H. and Maleque, Md. Abdul and Rahman, M.M. Hafizur (2022) Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5). pp. 6013-6023. ISSN 2193-567X E-ISSN 2191-4281

Mahmood, Mahmood Hameed and ,, Suryanto and Hazza Faizi Al Hazza, Muataz and Haider I., Farag (2017) Study the influence of the anodizing process parameters on the anodized copper hardness. In: 1st International Conference on Composite Material, Polymer Science and Engineering, CMPSE 2017, 24-25 June 2017, University of ToyamaToyama; Japan.

Mahmood, Mahmood Hameed and -, Suryanto and Al Hazza, Muataz Hazza Faizi (2017) The effects of water flow rate on copper corrosion. Key Engineering Materials, 748. pp. 235-239. ISSN 1662-9795

Mahmood, Mahmood Hameed and -, Suryanto and Sopyan, Iis (2015) Hydrophobic organosilica coating on steel and aluminium. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17252-17255. ISSN 1819-6608

Mahmud, Mudrikah Sofia and Aadnan, Aina Fadzleen and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2023) Cement-based with partial replacement of nano-silica for improvement in compressive strength. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Mahmud, Mudrikah Sofia and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2022) Size reduction via planetary milling and acid leaching effect on rice husk ash-derived nano-silica. Materials Today Proceeding, 66. pp. 2786-2790. E-ISSN 2214-7853

Maleque, M. H. A. Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Hasan, Muhammad Hasibul (2015) Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research, 1115. pp. 207-2012. ISSN 1022-6680

Maleque, Md. Abdul (2016) Alloy steel bars for special application bolting materials. Other. UNSPECIFIED.

Maleque, Md. Abdul (2012) Aluminium-copper-SiCp composite materials corrosion in biodiesel. Advanced Materials Research, 576. pp. 425-428. ISSN 1022-6680

Maleque, Md. Abdul (2015) Composite brake rotor: energy savings and wear performance. In: IRIIE 2015, 29 September 2015, Cultural Activity Centre (CAC), IIUM. (Unpublished)

Maleque, Md. Abdul (2016) Erosion corrosion and tribological behavior of TIG torch composite layers. Project Report. Research Management Centre, International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul (2011) Fabrication of metal matrix composite automotive brake rotor: part 1. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 80-85. ISBN 9789674182311

Maleque, Md. Abdul (2011) Fabrication of metal matrix composite automotive brake rotor: part 2. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 86-89. ISBN 9789674182311

Maleque, Md. Abdul (2015) Hardsurface layer of TiC embedded alloy steel by TIG torch technique. In: The 2015 ICBTS International Academic Research Conference in Europe & America, 22nd-24th October 2015, The Movenpick Hotels & Resorts Berlin, Germany.

Maleque, Md. Abdul (2018) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 1-7. (In Press)

Maleque, Md. Abdul (2017) Hot rolled alloy steel wire rod for pre-stressed steel - Specification. Other. DSM, KL.

Maleque, Md. Abdul (2017) Materials processing technology with Islamic perspective. In: KOE Islamization Seminar, 26 May 2017, KOE Islamization Office. (Unpublished)

Maleque, Md. Abdul (2015) Novel activated Ni-P-hBN composite powder for efficient solid lubricant coating application. In: PECIPTA2015, 4-6 December 2015, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul (2017) Particulate composite surface by TIG torch surfacing. In: Advanced Materials Characterization Technique (AMCT 2017), 16th-17th August 2017, Genting Highlands, Pahang. (Unpublished)

Maleque, Md. Abdul (2014) Performance assessment of aluminium composite material for automotive brake rotor. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 207-217. ISSN 1745-6444 (O), 1745-6436 (P)

Maleque, Md. Abdul (2015) Synthesis and characterization of Ni–P coated hexagonal boron nitride by electroless nickel deposition. Surface Engineering and Applied Electrochemistry, 51 (6). pp. 523-529. ISSN 1068-3755

Maleque, Md. Abdul (2017) TIG torch surfacing of nano-particulate hybrid composite layer: development and characterization. In: 1st International Workshop on Multifunctional Materials (IW2M-2017), 10th-12th October 2017, Mostaganem, Algeria. (Unpublished)

Maleque, Md. Abdul (2011) Technology of moulding for composite auto brake rotor. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 7-12. ISBN 9789674182311

Maleque, Md. Abdul (2022) Wear and corrosion behavior of metallic coated surface under exposure to biodiesel�. In: ICAMME2022, Virtual. (Unpublished)

Maleque, Md. Abdul (2018) Wear properties of SiC particulate preplaced TIG melted surface layered duplex stainless steel. In: World Summit on Advances in Science, Engineering and Technology (Cambridge Summit 2018), 4th-6th Jan. 2018, Cambridge, United Kingdom. (Unpublished)

Maleque, Md. Abdul (2011) A critical review of metal matrix composite brake rotor. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674182311

Maleque, Md. Abdul and ., M. Radhi and Rahman, Md. Mustafizur (2016) Wear study of Mg-SiCp reinforcement aluminium metal matrix composite. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1758-1764. ISSN 2289-4659 E-ISSN 2231-8380

Maleque, Md. Abdul and ., W. Saffin and Ahmed, A. S (2016) Formation of Fe-C-Si ternary composite coating on CP-titanium and its tribological interaction with Jatropha oil. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and A., Atiqah (2013) Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials. The Arabian journal for science and engineering , 38 (11). pp. 3191-3199. ISSN 1319-8025

Maleque, Md. Abdul and A., Atiqah and Iqbal, M. (2013) Development of kenaf hybrid composite for structural applications. In: IRIIE 2013, 19-20 February 2013, Cultural Activities Centre , International Islamic Univesity Malaysia. (Unpublished)

Maleque, Md. Abdul and A.R., Nur Farina and Paijan, Lailatul Harina and Abdullah, M. Azwan (2018) Lighter weight and energy efficient eco-siC composite for motorbike brake disc application. In: 29th INTERNATIONAL INVENTION, INNOVATION AND TECHNOLOGY EXHIBITION (ITEX) 2018, 10-12 May 2018, KLCC. (Unpublished)

Maleque, Md. Abdul and Abdullah, Umma and Yaacob, Iskandar Idris and Ali, Yousaf (2016) Characterization of ball-milled carbon nanotube dispersed aluminum mixed powders. In: 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3), 6th-10th October, 2014, Miskolc-Lillafüred, Hungary.

Maleque, Md. Abdul and Abdullahi, U. and Ali , Mohammad Yeakub (2015) Morphology of cnt-al nanocomposite under different ball milling parameters. Advanced Materials Research, 1115. pp. 398-401. ISSN 1022-6680

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2013) High performance aluminium composite brake rotor. In: International Conference And Exposition On Invention Of Institutions Of Higher Learning (PECIPTA 2013), 7th-9th Nov. 2013, Kuala Lumpur Convention Centre, Malaysia.

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2014) Tribocorrosion behaviour of biodiesel. Tribology Online, 9 (1). pp. 10-20. ISSN 1881-2198

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2013) Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor. In: 24th International Invention, Innovation and Technology Exhibition (ITEX 2013), 9-11 May 2013, KLCC. (Unpublished)

Maleque, Md. Abdul and Adebisi, A. A. and ., N. Izzati (2016) Fracture surface behaviour of Al-Mg-SiCp composite materials. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Adebisi, Adetayo A. and Shah, Qasim Hussain (2012) Energy and cost analysis of weight reduction using composite brake rotor. International Journal of Vehicle Structures & Systems, 4 (2). pp. 69-73. ISSN 0975-3540 (O), 0975-3060 (P)

Maleque, Md. Abdul and Adebisi, Adetayo Abdulmumin and Zainal, Nur Izzati (2017) Analysis of fracture mechanism for al-Mg/SiCp composite materials. IOP Conference Series: Materials Science and Engineering, 184. 012031-1. ISSN 1757-8981 E-ISSN 1757-899X

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Faizul, M. and Sapuan, S. M. (2014) Automotive bottom structure composite materials selection: digital logic and knowledge based system approach. In: Engineering composites: properties and applications. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 191-210. ISBN 9789673443963

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Mohammad Ismail, Mohammad Abul Fazal and Iqbal, M. M. and Paruka, Perowansa (2015) Effect of electron beam radiation on water absorption of hybrid kenaf-glass unsaturated polyester composite. Advanced Materials Research, 1115. pp. 266-269. ISSN 1022-6680

Maleque, Md. Abdul and Afiq, M. (2017) Particulate preplaced TIG melted surface layer of duplex stainless steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Ani, Mohd Hanafi and Samat, Noorasikin and Ahmed, Abu Saleh and Rahman, Md Mustafizur (2016) Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Arifutzzaman, A. (2012) Digital logic and knowledge-based system for the automotive piston material selection. International Journal Materials and Structural Integrity, 6 (2/3/4). pp. 134-150. ISSN 1745-0055

Maleque, Md. Abdul and Arifutzzaman, Abul (2014) Effect of copper on tensile strength improvement of Al-Cu-SiCp new composite. Materials Science Forum, 773-77. pp. 541-546. ISSN 1662-9752

Maleque, Md. Abdul and Azwan, M. K. and Muhammad M., Muhammad M. (2020) Sliding wear of SiC reinforced duplex stainless steel via TIG torch sur-face melting technique. Recent Patents on Engineering, 14 (3). pp. 366-372. ISSN 1872-2121 E-ISSN 2212-4047

Maleque, Md. Abdul and Belal, Ahmed Ghazal and Ali, Mohammad Yeakub and Al-razzouk, Maan Hayyan and Ahmed, Abu Saleh (2015) Corrosion of surface modified AISI 4340 steel in jatropha biodiesel. Advanced Materials Research, 1115. pp. 243-246. ISSN 1022-6680

Maleque, Md. Abdul and Bello, K A and Adebisi, A A and Dube, A (2017) Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Bello, K. A and Md Idriss, Ahmed Nazrin and Mirdha, S. (2013) Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique. Applied Mechanics and Materials, 378. pp. 259-264. ISSN 1660-9336

Maleque, Md. Abdul and Bello, K. A. (2017) Noble hybrid composite coated low alloy steel for high temperature applications. In: Malaysia Technology Expo (MTE 2017), 16th-18th Feb. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Adebisi, Adetayo Abdulmumin and -, Normaizatul Akma (2017) Optimization of tribological performance of SiC embedded composite coating via Taguchi analysis approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Salim, Nur Akma (2016) Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Ghazal, Belal Ahmed and Ali, Mohammad Yeakub and Hayyan, Maan and Ahmed, Abu Saleh (2015) Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting. In: International Conference on Functional Materials and Metallurgy, ICoFM 2014, 17-18 Sep 2014, Pulau Pinang.

Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Cetin, Safa and Efeoglu, Ihsan and Rahman, Md Mustafizur (2023) Wear and corrosion of ceramic coated metallic surface in presence of biodiesel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9—10 August, 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Hassan, Masjuki and K.O., Low and Ali, Mohammad Yeakub (2021) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November, Universiti Teknologi Brunei ( Virtual ). (Unpublished)

Maleque, Md. Abdul and Karim, M., Rezaul (2011) Wear of aluminium matrix composite – effects of reinforcement combination. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 90-95. ISBN 9789674182311

Maleque, Md. Abdul and Karim, Md Rezaul (2008) Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study. Industrial Lubrication and Tribology, 60 (4). pp. 189-194. ISSN 0036-8792

Maleque, Md. Abdul and Masjuki, H.H. (2002) Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant. Industrial Lubrication and Tribology, 54 (4). pp. 177-182. ISSN 0036-8792

Maleque, Md. Abdul and Mat Jusoh, Ahmad Haziq and Salehudin, Nabilah Farhana and Yee, Sen Tat and Din, Mohd Idrus and Adenan, Rashimah and Abdullah, Mohamad Akhir and Mat Zain, Mohd Hafizy and Lim, Sooi San and Chum, Pak Kuan and Ahmad Salman, Shafiq Wazzan and Yazid, Zurawati and Mat Isa, Mohd Azlan and Mohd Saleh, Mohd Khairul Annuar and Chua, Seok Cheng and Idris, Mohd Nazri and Karam Singh, Salvinder Singh and Lee, Hooi Lan and Tan, Chin Guan and Pang, See How (2023) Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD). Policy Paper. Department of Standard Malaysia (DSM), Malaysia.

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina (2017) Eco-friendly automotive disc brake and cylinder liner (Eco SiC). In: IIUM World Prosumer Convention 2017, 7th-11th August 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Bello, Kamillo and ,, Mohd Azwan and Rahman, Md Mustafizur (2018) Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach. Jurnal Tribologi, 17. pp. 15-28. E-ISSN 2289-7232

Maleque, Md. Abdul and Poon, Y. M. and Masjuki, H. H. (2004) The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel. Journal of Materials Processing Technology, 153-15 (10). pp. 482-487. ISSN 0924-0136

Maleque, Md. Abdul and Salit, Mohd. Sapuan (2013) Materials selection and design. Springer Briefs in Materials . Springer, Singapore. ISBN 97898-4560-37-5 (In Press)

Maleque, Md. Abdul and Wan Yusoff, Wan Ahmad Yusmawiza and Samat, Noorasikin and Ali, Mohammad Yeakub and Rahman, Md Mustafizur and Adetayo A., Adebisi (2017) Prototype development of light weight aluminium matrix composite automotive brake rotor. Project Report. UNSPECIFIED. (Unpublished)

Maleque, Md. Abdul and ghazal , Belal Ahmed and Ali, Mohd Yeakub and Hayyan, Maan and Hashim, Mohd Ali and Ahmed, Abu Saleh (2014) Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14), 23th-25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Mamat, M. Azwan and Maleque, Md. Abdul and Rahman, Md Mustafizur (2019) TIG torch surfacing of metallic materials – a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 0020-2967 E-ISSN 1745-9192

Manshor, Hanisah and Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani (2022) Effect of pressure load on the physical properties of ZTA-TiO2-Cr2O3. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2021, 18-19 August 2021, Kuala Lumpur.

Manshor, Hanisah and Ramli, Abdul Wahid and Ahmad Azhar, Ahmad Zahirani and Abdullah, Ezzat Chan and Ahmad, Zainal Arifin (2016) Effect of Cr2O3-TiO2 addition on the physical properties of zirconia toughened alumina. In: Advanced Materials Characterization Technique, Kuala Lumpur.

Manshor, Hanisah and Wan Sabri, Wan Muhammad Ihsan and Ramli, Abdul Wahid and Ahmad Azhar, Ahmad Zahirani and Abdullah, Ezzat Chan and Ahmad, Zainal Arifin (2016) Effect of titania and magnesia on the physical properties of zirconia toughened alumina. Materials Science Forum, 840. pp. 82-86. ISSN 0255-5476

Md Azizan, Farihan and Purwanto, Hadi and Mustafa, Mohd Yusry (2012) Effect of Sn addition on mechanical properties of zinc-based alloy. Advanced Materials Research, 576. pp. 378-381. ISSN 1022-6680

Md Husain, Nadiah and Razak, A.A.A. and Wan Azahar, Wan Nur Aifa and Kasim, Norhidayu and Ismail, Norfarah Nadia and Saad, Siti Asmahani and Masjuki, Siti Aliyyah and Ibrahim, Saerahany Legori and Ramli, Ahmad Bukhari (2020) Reusable concrete debris as aggregate replacement on the properties of green concrete. In: Proceedings of AICCE'19. Lecture Notes in Civil Engineering (53). Springer International Publishing, pp. 869-878. ISBN 978-3-030-32815-3

Md Idriss, A. N. and Kasolang, S. and Maleque, Md. Abdul (2022) Literature survey on manufacturing alumina/aluminum MMC by stir casting and their wear behaviors with and without solid lubrication. In: 3rd Malaysian International Tribology Conference, 28-30 September 2020, Virtual.

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2022) Synthetization of TiC surface hardening using TIG melting technique - the effect of working distance. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21-23 June 2021, Kuala Lumpur, Malaysia.

Md Idriss, A. N. and Maleque, Md. Abdul and Yaacob, Iskandar Idris and -, Normiza and -, Noraini and Mridha, Shahjahan (2012) Failure of woven fiber glass epoxy composite under charpy impact loading. In: The 21st Scientific Conference of the Microscopy Society of Malaysia , 22 - 24 November 2012, Kota Bahru, Malaysia..

Md Idriss, Ahmed Nazrin and Kasolang, Salmiah and Md. Abdul, Maleque and Md Nasir, Ramdziah (2021) An overview on the importance of surface modification by TIG and lasers incorporating carbides and their relations to wear behaviours. Jurnal Tribologi, 29. pp. 96-116. ISSN 2289-7232

Md Idriss, Ahmed Nazrin and Mridha, Shahjahan (2011) Architecture of chopped fiber glass in plastic composite processed under different loads. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 114-118. ISBN 9789674182311

Md Idriss, Ahmed Nazrin and Mridha, Shahjahan (2011) Impact strength behaviour of the woven and chopped fiber glass composites at different temperatures. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 132-137. ISBN 9789674182311

Md Idriss, Ahmed Nazrin and Mridha, Shahjahan (2011) Variation of fiber architecture on loads applied in fabrication of epoxy/woven fiber glass composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 119-124. ISBN 9789674182311

Md Yusof, Fauziah and Abd Rahim, Mohd Khairul Hazami and Samsudin, Ahmad Safwan and Mohamad Nor, Nor Hafiez and Ahmad, Zuraida and Halim, Zahurin (2016) Optimization of natural fiber composite parameter using Taguchi approach. Advanced Materials Research, 1133. pp. 185-188. ISSN 1022-6680

Md. Idriss, A. N and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Md Nasir, Ramdziah and Mridha, Shahjahan and Baker, T. N. (2017) Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology. ISSN 0267-0836 E-ISSN 1743-2847

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2020) The effect of cutting parameters on tool wear in drilling aluminium 7075. TEST Engineering & Management, 83 (May-June). pp. 1274-1280. ISSN 0193-4120

Mohamad, Souad A. and Ahmed, Nafees and Othman, Raihan and Othman, Maizatulnisa (2018) Optimization of TiO2 thin film thickness for dye sensitized solar cell applications. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohamad, Souad A. and Othman, Maizatulnisa (2015) Effect of temperature on the optical and morphological properties of zinc oxide thin films prepared by RF magnetron sputtering. Advanced Materials Research, 1115. pp. 422-425. ISSN 1662-8985

Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah and Wan Yusoff, Wan Ahmad Yusmawiza (2011) A surgical training model manufacture using fused deposition modeling. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 44-49. ISBN 9789674181598

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) Improvement of typical hip-joint design for gripping and fixing. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 26-43. ISBN 9789674181598

Mohamad Sholihin, Mohamad Hanis and Mohd Zaki, Hafizah Hanim and Sarifuddin, Norshahida and Nor Hairin, Assayidatul Laila (2019) Effect of annealing temperatures on surface oxidation of Ti-50.8 at% Ni shape memory alloy. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2018, 18th-19th August, 2018, Grand Riverview Hotel, Kota Bharu.

Mohamed Ariff, Tasnim Firdaus and Ewing, Goey and Kam , Yee Wah (2011) Design of a simple and affordable electric bicycle. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 4-9. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Lau, Ken Tick (2011) Design of bicycle helmet using FEA. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 10-17. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Law, Siah Yong (2011) Mould design for handphone casing using moldflow. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 18-25. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Yap, Yee Seng (2011) Application of statistical quality control for quality improvement. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 66-71. ISBN 9789674181598

Mohamed Haider, Farag I. and ,, Suryanto and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2017) Evaluation of the effects of copper electroplating parameters on the adhesion using response surface methodology. Applied Mechanics and Materials, 864. pp. 121-126. ISSN 1662-7482

Mohamed Rehan, Muhammad Saifuddin and Rousseau, Jerome and Fontaine, Stephanie and Gong, Xiaojing (2017) Experimental study of the influence of ply orientation on DCB mode-I delamination behavior by using multidirectional fully isotropic carbon/epoxy laminates. Composite Structures, 161 (1). pp. 1-7. ISSN 0263-8223

Mohamed Yatim, Norazlina and Yusof, Faridah and Ratnam, Chantara Thevy and Sopyan, Iis (2012) Irradiation modification of epoxidized natural rubber/ethylene vinyl acetate/carbon nanotubes nanocomposites. Advanced Materials Research, 364. pp. 427-433. ISSN 1022-6680

Mohammed, M. I. and Sulaeman, Erwin and Mustapha, F. (2017) Dynamic response for structural health monitoring of the Penang (I) cable-stayed bridge. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Gombak, Kuala Lumpur..

Mohan, Raja and J, Subha and Ali, Fathilah and Ryu, Sung Hun (2008) Synthesis of copper nanoparticles by electroreduction process. Materials and Manufacturing Processes, 23 (8). pp. 782-785. ISSN 1532-2475 (O), 1042-6914 (P)

Mohd Abid, Mohd Asyadi Azam and Safie, Nur Ezyanie and Abdul Aziz, Mohd Fareezuan and Raja Seman, Raja Noor Amalina and Suhaili, Muhamad Rafi and Abdul Latiff, Anas and Arith, Faiz and Mohamed Kassim, Anuar and Ani, Mohd Hanafi (2021) Structural characterization and electrochemical performance of nitrogen doped graphene supercapacitor electrode fabricated by hydrothermal method. International Journal of Nanoelectronics and Materials, 14 (2). pp. 127-136. ISSN 1985-5761 E-ISSN 2232-1535

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah and Dorah, Norasimah and Raja Seman, Raja Noor Amalina and Ani, Mohd Hanafi and Sirat, Mohd Shukri and Ismail, Edhuan and Fauzi, Fatin Bazilah and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop (2017) Review—Critical considerations of high quality graphene synthesized by plasma-enhanced chemical vapor deposition for electronic and energy storage devices. ECS Journal of Solid State Science and Technology, 6 (6). M3035-M3048. ISSN 2162-8769 E-ISSN 2162-8777

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Shah Abdullah, Norazharuddin and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process. In: International Conference of X-Ray and Related Techniques 2016 (ICXRI 2016), 17th-18th August 2016, Dorsett Hotel, Putrajaya.

Mohd Ali, Afifah and Janal, Nurul Nabihah and Hamidon, Nor Ezzati and Ahmad Azhar, Ahmad Zahirani and Mokhtar, Suhaily and Bahar, Rubina and Ahmad, Zainal Arifin (2018) The relationship of cutting chip type, length and thickness to wear of Zirconia Toughened Alumina Added with Magnesium Oxide (ZTA-MgO) cutting tool. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 452-457. ISSN 2581-4311

Mohd Azizan, Farihan and Purwanto, Hadi and Mustafa, Mohd. Yusry (2012) Effect of adding Ag on tensile and microstructure properties of zinc alloy. International Journal of Engineering and Technology, 12 (3). pp. 78-84. ISSN 2077-1185

Mohd Daud, Farah Diana and Iis, Sopyan and Mel, Maizirwan (2011) Synthesis of TiO2 nanosized powder photocatalyst via sol-gel method for bacteria inactivation application. Malaysian Journal of Microscopy, 7. pp. 161-169. ISSN 1823-7010

Mohd Daud, Farah Diana and Johari, Muhammad Hilmi and Ahmad Jamal, Afiq Haikal and Kahlib, Nor Amyra Zulianey and Hairin, Assayidatul Laila Nor (2019) Preparation of nano-silica powder from silica sand via sol-precipitation method. In: "International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018", 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani (2018) Development of modified ceramic membranes by silica dip-coating method for removal of co2 from biogas plant. Project Report. UNSPECIFIED. (Unpublished)

Mohd Daud, Farah Diana and Mohamad Azir, Muhammad Mirza and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2021) Preparatiion of CaO-based pellet using rice husk ash via granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1). ISSN 1511-788X E-ISSN 2289-7860

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2014) Carbon dioxide capture at various temperatures using Ca(OH)2 sorbent fabricated by sol-gel route in ethanol media. Advanced Materials Research, 1024. pp. 35-38. ISSN 1662-8985

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2016) CTAB-assisted precipitation synthesis of Ca(OH)2 sorbent for CO2 captures. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, Selangor.

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2013) Fabrication of Ca(OH)2 nanostructures by facile solution – based synthesis at various reaction temperatures as CO2 adsorbent. Materials Science Forum, 756. pp. 175-181. ISSN 1662-9752

Mohd Daud, Farah Diana and Vignesh, Kumaravel and Sreekantan, Srimala and Mohamed, Abd. Rahman (2015) Improved CO2 adsorption capacity and cyclic stability of CaO sorbents incorporated with MgO. New Journal of Chemistry, 40 (1). pp. 231-237. ISSN 1144-0546 E-ISSN 1369-9261

Mohd Hatta, Maziati Akmal and Abd Rashid, Mohd Warikh M. (2021) Electrical behaviour of yttrium-doped potassium sodium niobate thin film for piezoelectric energy harvester applications. Journal of the Australian Ceramic Society. pp. 1-8. ISSN 2510-1560 E-ISSN 2510-1579

Mohd Hatta, Maziati Akmal and Abd Rashid, Mohd Warikh M. and Azlan, Umar Al Amani and Azam, Mohd Asyadi and Ismail, Syahriza (2016) Effect of amphoteric dopant on the dielectric and structural properties of yttrium doped potassium sodium niobate thin film. Materials Letters, 170. pp. 10-14. ISSN 0167-577X

Mohd Hatta, Maziati Akmal and Abd Rashid, Mohd Warikh M. and Azlan, Umar Al Amani and Azmi,, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, M. S. (2018) Optimizing the processing conditions of sodium potassium niobate thin films prepared by sol-gel spin coating technique. Ceramics International, 44 (1). pp. 317-325. ISSN 0272-8842

Mohd Nasir, Nur Aimi and Anuar, Hazleen and Mel, Maizirwan and Mohd Salit, Sapuan and Wahit, Mat Uzir and Zakaria, Sarani (2015) Preparation of durian skin nanofibre (DSNF) and its effect on the properties of polylactic acid (PLA) biocomposites = Penyediaan nano-serabut kulit durian (DSNF) dan kesannya ke atas sifat biokomposit asid polilaktik (PLA). Sains Malaysiana, 44 (11). pp. 1551-1559. ISSN 0126-6039

Mohd Shatar, Nursyahirah and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi and Mohd Sabri, Mohd Faizul (2022) Mix wettability surface on solar still cover for freshwater productivity enhancement. Desalination, 534. pp. 1-9. ISSN 0011-9164

Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin (2015) A study of CaH2 effectiveness as oxidation prevention in solid state sintering of single phase NiTi alloy. Research Journal of Applied Sciences, 10 (1). pp. 28-32. ISSN 1815-932X E-ISSN 1993-6079

Mohd Zaki, Hafizah Hanim and Mohamad Sholihin, Mohamad Hanis and Abdullah, Jamaluddin and Sarifuddin, Norshahida (2018) Comparison studies on phase formation and transformation behavior between Ni-Ti and Ni-TiH2 synthesized via solid state sintering. International Journal of Current Science, Engineering & Technology, 1 (special issue 1). pp. 464-470. ISSN 2581-4311 E-ISSN 2581-4311

Mohd Zaki, Hafizah Hanim and Mohd Sobri, Nur Azemuzahir and Abdullah, Jamaluddin and Sarifuddin, Norshahida and Mohd Daud, Farah Diana (2020) Characterization of NITI shape memory alloy sintered at different temperatures in reducing environment. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 - 24 July 2019, Kangar; Malaysia.

Mohd. Din, Shamzani Affendy (2020) Carbon footprint assessment of the construction materials: challenges and future towards achieving better low-carbon nation. In: International Conference on Civil, Architecture and Pollution Control (ICCAPC 2020), 6-8 March, 2020, Academic Exchange Information Centre, China. (Unpublished)

Mohd. Din, Shamzani Affendy and Aminuddin, N M (2014) The exposure assessment of airborne particulates matter (PM10 & PM2.5) towards building occupants: a case study at KL Sentral, Kuala Lumpur, Malaysia. IOP Conference Series: Earth and Environmental Science, 18 (2014). pp. 1-6. ISSN 1755-1315

Mohmad Barudin, Nurzahrin and Yaacob, Haryati and Abd Hassan, Norhidayah and Warid, Mohd Naqiudin and Idham, Mohd Khairul and Ismail, Che Ros and Md Nor, Hasanan and Hainin, Mohd Rosli and Mohamad, Azman and Afiqah, R N and Ayob, Mohd Fairullazi and Putrajaya, Ramadhansyah (2018) Correlation between functional and structural properties of flexible pavement. In: The 12th International Civil Engineering Post Graduate Conference (SEPKA) - The 3rd International Symposium on Expertise of Engineering Design (3rd ISEED), 28th August 2018, Le Grandeur Palm Resort, Senai, Johor. (Unpublished)

Mohmad Barudin, Nurzahrin and Yaacob, Haryati and Abd Hassan, Norhidayah and Warid, Mohd Naqiudin and Idham, Mohd Khairul and Ismail, Che Ros and Md Nor, Hasanan and Hainin, Mohd Rosli and Mohamad, Azman and Afiqah, R N and Ayob, Mohd Fairullazi and Putrajaya, Ramadhansyah (2019) Correlation between functional and structural properties of flexible pavement. IOP Conference Series: Earth and Environmental Science, 220 (1). ISSN 1755-1307

Mridha, Shahjahan (2011) Impact behaviour of carbon/epoxy composites in moisture and temperature environments. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 125-131. ISBN 9789674182311

Mridha, Shahjahan and Idriss, A.N. Md and Maleque, Md. Abdul and Suryanto, - and Mohamad, Souad A. (2012) Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding ARC. International Journal of Mechanical and Materials Engineering (IJMME), 7 (1). pp. 48-53. ISSN 2198-2791

Mridha, Shahjahan and Md Idriss, Ahmed Nazrin and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Baker, T. Neville (2015) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11). pp. 1362-1369. ISSN 0267-0836

Mridha, Shahjahan and Nafis, Sarwar Islam (2011) Properties of wood fiber reinforced polypropylene composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 101-107. ISBN 9789674182311

Mt Aznam, Suazlan and Maruoka, Naru and Imai, Ryosuke and Mori, Shoji (2021) Process of liquid supply to heated surface by a honeycomb porous plate for critical heat flux enhancement. Journal of Thermal Science and Technology, 16 (3). pp. 1-17. ISSN 1880-5566 E-ISSN 1880-5566

Muhamad Khairussaleh, Nor Khairusshima and A.K.M, Amin and C.H., Che Hassan and A.G. , Jaharah (2015) Tool wear during milling laminated carbon fibre reinforced plastic. Advanced Materials Research, 1115. pp. 96-99. ISSN 1662-8985

Muhamad Khairussaleh, Nor Khairusshima and C.H., Che Hassan and A.G. , Jaharah and A.K.M., Nurul Amin and A.N., Md Idriss (2013) Effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic. Wear, 302 (1-2). pp. 1113-1123. ISSN 0043-1648

Muhida, Riza and Sutjipto, Agus Geter Edy and ., Afzeri and Toyama, T. and Okamoto, Hiroaki (2009) Relationship between average slope of textured substrate and poly-Si thin film solar cells performance. Materials Research Innovations, 13 (3). pp. 246-248. ISSN 1433-075X

Musa, Hussin Abdullrhman and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2017) Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Musa, Moh H.A. and Md. Abdul, Maleque and Ali, Mohammad Yeakub (2020) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 439-444. ISBN 780128131954

Musa, Moh HA and Maleque, Md. Abdul and Y Ali, Mohammad (2020) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 439-444. ISBN 978-0-12-813196-1

Musa, Mukhtaruddin and Purwanto, Hadi and Abdul Razak, Rajabi and Othman, Raihan and Musa, Lukman and Ani, Mohd Hanafi (2020) Electrochemical Impedance Spectroscopy (EIS) study of coconut water as natural inhibitor in Malay traditional preservation of iron artefact. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand..

Musa, Mukhtarudin and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and Abdul Hamid, Abd. Malek and Othman, Raihan and Ani, Mohd Hanafi (2017) Microstructural and compositional study of metal laminated composite in Malay Keris. Advanced Science Letters, 23 (7). pp. 6237-6241. ISSN 1936-6612 E-ISSN 1936-7317

N

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Khan, Sher Afghan and Pradeep, Aksatha (2019) The effect of replacement of natural sand by manufactured sand on the properties of the concrete. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018, 22nd-23rd Nov. 2018, Bangkok, Thailand.

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Ali, Maisarah (2019) Polyethylene Terehthalate (PET) bottles waste as fine aggregate in concrete. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1177-1180. E-ISSN 2278-3075

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Ali, Maisarah and Md Husain, Nadiah and Wan Azahar, Wan Nur Aifa and Kasim, Norhidayu (2020) Correlation between slump, VeBe and compaction factor of concrete containing shredded PET bottles, manufactured sand (M-sand) and river sand as fine aggregate. In: 5th International Conference on Advanced Technology and Applied Sciences and 6th Malaysia Japan Joint International Conference (ICETAS MJJIC 2020), 7-8 October 2020, Kuala Lumpur. (Unpublished)

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Ali, Maisarah and Md Husain, Nadiah and Wan Azahar, Wan Nur Aifa and Kasim, Norhidayu (2021) Correlation between slump, VeBe and compaction factor of concrete containing shredded PET bottles, manufactured sand (M-sand) and river sand as fine aggregate. In: 5th International Conference on Advanced Technology and Applied Sciences and 6th Malaysia Japan Joint International Conference (ICETAS MJJIC 2020), 7-8 October 2020, Kuala Lumpur, Malaysia.

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Ali, Maisarah and Norhisham, Shuhairy (2020) The relation of compression strength with modulus of rupture and UPV of concrete containing M sand as fine aggregate. Advances in Science, Technology and Engineering Systems Journal (ASTESJ), 5 (5). pp. 39-46. ISSN 2425-6698 E-ISSN 2415-6698

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Lee Woen, Ean and Ali, Maisarah and Ulla, Naseer (2020) The impact of manufactured sand (M-Sand) as partially and fully replacement of fine aggregate in concrete. Advances in Science, Technology and Engineering Systems Journal, 5 (1). pp. 302-306. ISSN 2415-6698

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Mohd Ismail, Kamsiah and Ali, Maisarah (2019) Polyethylene Terephthalate (PET) bottles waste as fine aggregate in concrete - a review. In: International Conference on Sustainable Urban Development Resource Conservation and Food Security, 26th-27th April 2019, Mangalore, India. (Unpublished)

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Othman, Nur Hawa and Ali, Maisarah (2020) The recycled polyethylene terephthalate (PET) bottles waste as a fine aggregate replacement in concrete. TEST Engineering & Management magazine, 83 (May-June 2020). pp. 1093-1096. ISSN 0193-4120

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Othman, Nur Hawa and Amiruddin, Ahmad Kamil and Ali, Maisarah (2019) The effect of recycled Polyethylene Terephthalate (PET) bottles waste as a fine aggregate replacement in concrete. In: 4th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME) 2019, 30th–31st October 2019, Putrajaya. (Unpublished)

Naili Rozan, Alya and Purwanto, Hadi (2015) Development process for tar filtering from biomass pyrolysis. In: 5th International Conference on Energy and Sustainability 2014 , 16-18 December 2014, Putrajaya, Malaysia.

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hassan, Masjuki and Bello, Kamilu Adeyemi (2023) Hybrid coating of titanium alloys via liquid additive manufacturing method: a review of recent advances. In: 6th International Conference on Mechanical, Automotive and Aerospace Engineering 2023 (ICMAAE '23), Kuala Lumpur, Malaysia. (Unpublished)

Naqshbandi, Abreeq and Sopyan, Iis and -, Gunawan and -, Suryanto (2014) Sol-gel synthesis of Zn doped HA powders and their conversion to porous bodies. Applied Mechanics and Materials, 493. pp. 603-608. ISSN 1660-9336

Naqshbandi, Abreeq R. and Sopyan, Iis and -, Gunawan (2013) Development of porous calcium phosphate bioceramics for bone implant applications: a review. Recent Patents on Materials Science, 6. pp. 238-252. ISSN 1874-4656

Nor Hairin, Assayidatul Laila (2019) Preparation of ZNSB thermoelectric materials using electrodeposition method. Research Report. UNSPECIFIED, IIUM. (Unpublished)

Nor Hairin, Assayidatul Laila and Idris, Mohd Fitri and Othman, Raihan and Mohd Daud, Farah Diana and Rozhan, Alya Naili and Mohd Zaki, Hafizah Hanim (2019) Effect of acceptor impurity (Cu and Al) in Zn4Sb3 thermoelectric materials via hotisostatic pressing (HIP) method. In: Materials characterization using x-rays and related techniques, 18th-19th August 2018, Kota Bharu Kelantan.

Nor Hairin, Assayidatul Laila and Nanko, Makoto (2014) Characterization of cast iron scrap chips toward β-FeSi2 thermoelectric materials. Materials Science Forum, 804. pp. 3-6. E-ISSN 1662-9752

Nor Hairin, Assayidatul Laila and Nanko, Makoto and Takeda, Masatoshi (2016) Effects of doping elements in β-FeSi2 prepared utilizing cast iron scrap chips. Materials Transactions, 57 (3). pp. 445-451. ISSN 1345-9678 E-ISSN 1347-5320

Nor Hairin, Assayidatul Laila and Nanko, Makoto and Takeda, Masatoshi (2014) Upgrade recycling of cast iron scrap chips towards β-FeSi2 thermoelectric materials. Materials, 7. pp. 6304-6316. ISSN 1996-1944

Nor Hairin, Assayidatul Laila and Othman, Raihan and Rizal, Faireez and Mohd Daud, Farah Diana (2017) Physiochemical characterization of Sn-Zn coatings electrodeposited from an acidic chloride bath in the absence of complexing agent. International Journal of Current Science, Engineering & Technology, Original Research Article | Open Access | AMCT 2017 Malaysia | Special Issue, Special issue. pp. 493-498. ISSN 2581-4311

Nordin, N.M. and Buys, Yose Fachmi and Anuar, Hazleen and Ani, Mohd Hanafi and Pang, Ming Meng (2019) Development of conductive polymer composites from PLA/TPU blends filled with graphene nanoplatelets. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM), 27 - 29 Nov 2018, Batu Feringgi, Penang.

Nordin, Norhuda Hidayah and Leong, Zhaoyuan and Goodall, Russel and Todd, Iain (2022) Theoretical critical metastability temperature to interpret phase formation in a lamellar-like- structured high entropy alloy. Journal of Materials Research and Technology, 18. pp. 2519-2530. ISSN 2238-7854 E-ISSN 2214-0697

Nordin, Norhuda Hidayah and Mohamad, Faiz Syazwan and Jamal, Nur Ayuni (2020) Non-isothermal crystallization kinetics of a rapidly solidified as-cast TiZrHfNiCu high entropy bulk metallic glass. World Journal of Engineering and Technology, 8. pp. 280-295. ISSN 2331-4222 E-ISSN 2331-4249

Nordin, Norhuda Hidayah and Mohamad, Faiz Syazwan and lsmail, Izham lzzat and Sulaiman, Mohd Hafis (2022) Numerical analysis on deformation behavior of High Entropy Alloy (HEA) under compression test. In: Proceedings of the 3rd Malaysian International Tribology Conference, 05-06 July 2021, Virtual conference.

Noura, Sajjad and Sabaeei, Abdulnaser and Ismat, Gailan and Mirzapour, Sina and Muniandi, Ratnasamy and Al-Mansob, Ramez and Carter, Alan (2022) Optimisation of recoverable horizontal deformation and size ratio of compacted rubberized stone mastic asphalt based on rubber and binder contents using response surface methodology. In: The First International Symposium on Civil Engineering and Environmental Research, 1-2 November 2021, Online.

Nur Sa’adah, Muhamad Sauki and Herman, Sukreen Hana and Ani, Mohd Hanafi and Mohamad Rusop , Mahmood (2013) Electrical properties dependence on substrate temperature of sputtered ZnO nanoparticles thin films on teflon substrates. Advanced Materials Research, 795. pp. 403-406. ISSN 1022-6680

Nuruddin, Muhd Fadhil and Saad, Siti Asmahani and Shafiq, Nasir and Ali, Maisarah (2016) Effect of pretreatment soaking duration to characteristic of ultrafine treated rice husk ash (UFTRHA) as supplementary cementing material (SCM). ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7596-7600. ISSN 1819-6608

Nuruddin, Muhd Fadhil and Saad, Siti Asmahani and Shafiq, Nasir and Ali, Maisarah (2016) Milling time influence of ultrafine treated rice husk ash to pozzolanic reactivity in portlandite. In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016; Kuala Lumpur; Malaysia, 15th-17th Aug. 2016, Kuala Lumpur.

O

Olalekan, Salawudeen Taofeeq and Al-Khatib, Ma An Fahmi Rashid and Yusof, Faridah and Shah, Qasim Hussain and Muyibi, Suleyman Aremu (2011) Effect of processing conditions in the preparation of PP-Ternary Nanocomposite using MWCNT as secondary filler. Journal of Materials Science and Engineering, 5. pp. 130-144. ISSN 1934-8959

Omar, Afiqah and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Mechanical behaviour of Oil Palm Empty Fruit Bunch (OPEFB) albumen-composites concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 49-54. ISBN 9789674182311

Omar, Afiqah and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Oil Palm Empty Fruit Bunch (OPEFB) for lightweight composites concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 9789674182311

Ooi, Chong Jin and Mridha, Shahjahan (2011) Mechanical properties of wood plastic composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 96-100. ISBN 9789674182311

Othman, Maizatulnisa and Ibrahim, Nor Azowa and Ruzaidi, Che Mohd and Mohd Nazarudin, Zakaria and Halim, Zahurin (2012) Biodegradability analysis of KBF reinforced poly(lactic acid) biocomposites. Advanced Materials Research, 576. pp. 434-437. ISSN 1022-6680

Othman, Maizatulnisa and Tan, Kok Hui and Hashim, Mohd Yusof and Khalid, Halissani and Ghazali, Ruzaidi and Zakaria, Nazarudin and Mat Tahir, Paridah and Hassan, Noor Azlina (2013) Effects of Multi-Walled Carbon Nanotubes (MWCNTS) on the mechanical and thermal properties of plasticized polylactic acid Nanocomposites. Advanced Materials Research, 812. pp. 181-186. ISSN 1662-8985

P

P M, Aaqib Rashad and Hrairi, Meftah and M, Santhosham and Boopathy, Rajendra (2013) Study of hardness and microstructure of Fe-C-Si-Mn-B hardfacing alloy. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Paijan, Lailatul Harina and Maleque, Md. Abdul (2018) Tribological properties of surface coated duplex stainless steel containing SiC ceramic particles. Jurnal Tribologi, 18. pp. 136-148. E-ISSN 2289-7232

Paijan, Lailatul Harina and Maleque, Md. Abdul and -, Suryanto (2016) Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur. (Unpublished)

Paijan, Lailatul Harina and Maleque, Md. Abdul and Adeyemi, Bello Kamilu and Mamat, Mohd Fauzi and Hussein, Nur Izan Syahriah (2023) Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. Jurnal Tribologi, 37. pp. 15-28. E-ISSN 2289-7232

Paruk, Perowansa Paruk and Siswanto, Waluyo Adi and Maleque, Md. Abdul and Mohd Shah, Mohd Kamal (2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force. Journal of Mechanical Science and Technology, 29 (5). pp. 1941-1953. ISSN 1976-3824 (O), 1738-494X (P)

Paruka, Perowansa and Maleque, Md. Abdul and Md Shah, Md Kamal (2014) Performance of hybrid aluminium–composite columnar tube under axial crush force. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur. (Unpublished)

Paruka, Perowansa and Mat Yasin, Md Hafizil and Mamat, Rizalman and Maleque, Md. Abdul and Md Shah, Md Kamal (2015) Performance properties of hybrid aluminium–composite columnar tube under axial crush force. Advanced Materials Research, 1115. pp. 288-291. ISSN 1022-6680

Paruka , Perowansa and Mat Yasin, Md Hafizil and Mamat, Rizalman and Maleque, Md. Abdul and Md Shah, Md Kamal (2015) Crush zone morphology of epoxy–glass fiber–aluminium composite columnar tube due to longitudinal crushing force. Advanced Materials Research, 1115. pp. 258-261. ISSN 1022-6680

Parveez, Bisma and Jamal, Nur Ayuni and Aabid, Md. Abdul and Baig, Alya Naili (2023) Microstructure and strengthening effect of coated diamond particles on the porous aluminum composites. Materials, 16 (8). pp. 1-12. ISSN 1996-1944

Parveez, Bisma and Jamal, Nur Ayuni and Anuar, Hazleen and Ahmad Nor, Yusilawati and Aabid, Abdul and Baig, Muneer (2022) Microstructure and mechanical properties of metal foams fabricated via melt foaming and powder metallurgy technique: a review. Materials, 15 (15). pp. 1-27. ISSN 1996-1944

Parveez, Bisma and Jamal, Nur Ayuni and Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Aabid, Abdul and Baig, Muneer (2023) Improvement in effectiveness of diamond in strengthening the porous aluminium composite. Journal of Materials Research and Technology, 25. pp. 25-37. ISSN 2238-7854

Parveez, Bisma and Jamal, Nur Ayuni and Mohamad Kadri, Syazwan and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim (2023) Microstructure and mechanical properties of porous aluminium composites reinforced with diamond particles. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME), 13-14 August 2022, Kuala Lumpur.

Parveez, Bisma and Jamal, Nur Ayuni and Mohamed Saleem, Muhammad Raeez (2023) Effect of uncoated and coated diamond on the compressive properties of porous aluminium composites. Materials Science and Engineering Technology, 54 (9). pp. 1114-1141. ISSN 1521-4052 E-ISSN 0933-5137

Parveez, Bisma and Jamal, Nur Ayuni and Mohamed Saleem, Muhammad Raeez (2023) Investigation of morphology and compressive properties of diamond reinforced porous aluminium composites. Asian Journal of Fundamental and Applied Sciences, 4 (1). pp. 12-17. E-ISSN 2716-5957

Parveez, Bisma and Jamal, Nur Ayuni Jamal and Aabid, Abdul and Baig, Muneer and Yusof, Farazila (2022) Experimental analysis and parametric optimization on compressive properties of diamond-reinforced porous Al composites. Materials, 16 (1). pp. 1-21. ISSN 1996-1944

Parveez, Bisma and Jamal, Nur Ayuni Jamal and Maleque, Md. Abdul and Rozhan, Alya Naili and Aabid, Abdul and Baig, Muneer (2023) Optimizing the compressive properties of porous aluminum composites by varying diamond content, space holder size and content. Materials, 16 (3). pp. 1-19. ISSN 1996-1944

Parveez, Bisma and Maleque, Md. Abdul and Jamal, Nur Ayuni (2021) Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. Journal of Materials Science, 56. pp. 16195-16222. ISSN 0022-2461 E-ISSN 1573-4803

Purwanto, Hadi and Manshor, Hanisah (2012) Effect of holding time on the corrosion potential of SS304. Advanced Materials Research, 576. pp. 382-385. ISSN 1022-6680

Purwanto, Hadi and Othman, Nur Ezzah Faezah and Zaini, KH and Abdullah, Yusuf (2015) Effect of electron beam irradiation on the morphology of alumina ceramic. In: International Conference in Advances in Manufacturing And Materials Engineering , 23-25 september 2014, Kuala Lumpur.

R

Rahimi, Norzihan and Hussain, Ahmad Kamil and Shaik Dawood, Mohd. Sultan Ibrahim and Mohd Alias, Adib Zulfadhli and Md Yusoff, Muhamed Hafiy Afiq and Mahmud, Jamaluddin (2018) Failure analysis of woven Kevlar/Epoxy under uniaxial tension. International Journal of Engineering and Technology(UAE), 7 (4). pp. 235-239. ISSN 2227-524X

Rahman, Md Mujibur and Rahman, H. Y. and Awang, Mohd Anuar and Sopyan, Iis (2018) Effects of sintering schedule to the characteristics of FeCrAl powder compacts formed at elevated temperature. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Rahman, Md. Mujibur and Ismail, M. A. and Sopyan, Iis and Rahman, H. Y. (2018) Effects of forming temperature and sintering rate to the final properties of FeCuAl powder compacts formed through uniaxial die compaction process. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Ramesh, Singh and Zulkifli, Nurin Wahidah and Tan, Chou Yong and Wong, Yinhow and Tarlochan, Faris and Ramesh, S. and Teng, W. D. and Sopyan, Lis and Bang, Le Thi and Sarhan, Ahmed A.D. (2018) Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia. Ceramics International, 44 (8). pp. 8922-8927. ISSN 0272-8842

Rashid, Muhammad Mahbubur and Sall, Alioune and Hasan, Tahsin F (2021) Automated farming system using distributed controller: a feasibility study. Asian Journal of Electrical and Electronic Engineering (AJoEEE), 1 (1). pp. 21-29. E-ISSN 2785-8189

Razali, Nurul Nabilah and Sopyan, Lis (2018) Incorporation of poly(Vinyl alcohol) for the improved properties of hydrothermal derived calcium phosphate cements. Indonesian Journal of Chemistry, 18 (2). pp. 354-361. ISSN 1411-9420

Razali, Nurul Nadirah and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md. Mujibur and Singh, Ramesh (2017) Effect of Poly(Vinyl Alcohol) addition on the properties of hydrothermal derived calcium phosphate cement for bone filling materials. In: 2nd International Conference on Materials Engineering and Nanotechnology (ICMEN2017), 12-14 May 2017, Kuala Lumpur.

Razali, Nurul Nadirah and Sukardi, Mohd Amirul and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md Mujibur (2018) The effects of excess calcium on the handling and mechanical properties of hydrothermal derived calcium phosphate bone cement. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Rejab, Nik Akmar and Ahmad Azhar, Ahmad Zahirani and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2013) The relationship between microstructure and fracture toughness of zirconia toughened alumina (ZTA) added with MgO and CeO2. International Journal of Refractory Metals and Hard Materials, 41. pp. 522-530. ISSN 0263-4368

Roshidan, Nursamirah and Majdi, Najiebah and Manshor, Hanisah and Rozhan, Alya Naili and Ahmad Azhar, Ahmad Zahirani (2022) The effect of carbon infiltration through CVI techniques on the physical properties of ZTA. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 291-300. ISSN 2462-1943

Roshidan, Nursamirah and Manshor, Hanisah and Rozhan, Alya Naili and Ahmad Azhar, Ahmad Zahirani (2022) The effect of polyvinyl alcohol addition on the solid carbon infusion in zirconia-toughened alumina. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2021, 18 - 19 August 2021, Kuala Lumpur.

Roslan, Alida and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani (2019) Comparison of zirconia toughened alumina fracture toughness obtained from Vickers indentation by applying various equations. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

Roslan, Farah Sakiinah and Saidin, Norazlina and Mat Harttar @ Mohd Hatta, Maziati Akmal and Hasbullah, Nurul Fadzlin and Thirunavakkarasu, Punithavathi M. (2022) Characterization of ZnO–TiO2-coated tapered fibres synthesized by a low-temperature hydrothermal method. Ukrainian Journal of Physical Optics, 23 (2). pp. 96-106. ISSN 1609-1833 E-ISSN 1816-2002

Rosli, A. Bakar and Marbie, M. M. and Herman, Sukreen Hana and Ani, Mohd Hanafi (2014) Gold-catalyzed growth of aluminium-doped zinc oxide nanorods by sputtering method. Journal of Nanomaterials, 2014 (67204). pp. 1-7.

Roslin, Amir Zakwan and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Effect of compaction time on the properties of coir fiber reinforced cement-albumen composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 68-73. ISBN 9789674182311

Rozhan, Alya Naili and Cahyono, Rochim B. and Yasuda, Naoto and Nomura, Takahiro and Hosokai, Sou and Purwanto, Hadi and Akiyama, Tomohiro (2012) Carbon deposition from biotar by fast pyrolysis using the chemical vInfiltration process within porous low-grade iron ore for iron-making. Energy & Fuels, 26 (12). pp. 7340-7346. ISSN 0887-0624

Rozhan, Alya Naili and Hairin, Assayidatul Laila Nor and Mohd. Salleh, Hamzah and Purwanto, Hadi (2019) Mechanism of carbon deposition within char derived from oil palm empty fruit bunch. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

S

S., Adzila and S., Ramesh and Sopyan, Iis (2016) Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14097-14100. ISSN 1819-6608

Saad, Siti Asmahani and Nuruddin, Muhd Fadhil and Shafiq, Nasir and Ali, Maisarah (2016) The effect of incineration temperature to the chemical and physical properties of Ultrafine Treated Rice Husk Ash (UFTRHA) as Supplementary Cementing Material (SCM). In: The 4th International Conference on Process Engineering and Advanced Materials (ICPEAM 2016), 15th - 17tth August 2016, Kuala Lumpur.

Saad, Siti Asmahani and Shafiq, Nasir and Ali, Maisarah (2018) Physicochemical properties and pozzolanic performance of ultrafine treated rice husk ash (uftrha) as additive in concrete. Planning Malaysia : Journal of the Malaysian Institute of Planners, 16 (2). pp. 285-292. ISSN 1675-6215 E-ISSN 0128-0945

Saad, Siti Asmahani and Shafiq, Nasir and Ali, Maisarah and Mohamed Osman, Mariana (2018) Analysis by means of surface response to chemical composition and pozzolanic reactivity of Ultrafine Treated Rice Husk Ash (UFTRHA) as cementing additive material. In: International Graduate Conference on Energy, Engineering & Technology 2018 (iGRAD2018), 4th-6th September 2018, Putrajaya, Malaysia. (Unpublished)

Saad, Siti Asmahani and Shafiq, Nasir and Mohamed Osman, Mariana and Masjuki, Siti Aliyyah (2018) Compressive strength and microstructure analysis of treated rice husk ash (TRHA) incorporated mortar. In: International Graduate Conference on Energy, Engineering & Technology 2018 (iGRAD2018), 4th-6th September 2018, Putrajaya, Malaysia. (Unpublished)

Saad, Siti Asmahani and Abdul Aziz, Farah Nora Aznieta and Ali, Maisarah (2015) Effect of tropical climate condition to compressive strength and microstructure properties of high performance fiber reinforced reinforced concrete (HPFRC). Advanced Materials Research, 1115. pp. 182-187. ISSN 1022-6680

Saad, Siti Asmahani and Nuruddin, Muhd Fadhil and Shafiq, Nasir and Ali, Maisarah (2015) Characterization, microstructure properties and impurities removal of treated rice husk ash (TRHA) as supplementary cementing material (SCM) in concrete using hydrochloric acid pretreatment process. Journal of Applied Science and Agriculture, 10 (3). pp. 1-4. ISSN 1816-9112

Saad , Siti Asmahani and Nuruddin, Muhd Fadhil and Shafiq, Nasir and Ali, Maisarah (2015) Pozzolanic reaction mechanism of rice husk ash in concrete – a review. Applied Mechanics and Materials, 773-774. pp. 1143-1147. ISSN 1662-7482

Saad , Siti Asmahani and Nuruddin, Muhd Fadhil and Shafiq, Nasir Shafiq and Ali, Maisarah (2014) Pozzolanic reaction mechanism of rice husk ash in concrete: a review. In: International Integrated Engineering Summit (IIES 2014), 1st-4th December 2014, Dewan Sultan Ibrahim, Universiti Tun Hussein Onn, Johor Bharu, Johor. (Unpublished)

Sabaruddin, Fatimah Atiyah and Chuan, Li Lee and Seng, Hua Lee and Ghani, Aizat and Samat, Noorasikin (2023) Flame retardancy evaluation of polymer composite-reinforced ceramic nanofillers. In: Synthetic and Natural Nanofillers in Polymer Composites: Properties and Applications. Woodhead Publishing Series in Composites Science and Engineering . Elsevier, UK, pp. 89-126. ISBN 978-0-443-19053-7

Sabaruddin, Fatimah A’thiyah and Samat, Noorasikin (2013) Effect of coupling agent on the mechanical properties of flame retardant PP/ATH nanocomposites. Advanced Materials Research, 812. pp. 241-245. ISSN 1022-6680

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Jumaidin, R. (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 57-70. ISBN 978-1-4987-5302-9

Sahari, Japar and Maleque, Md. Abdul (2016) Effect of oil palm ash on the mechanical and thermal properties of unsaturated polyester composites. e-Polymers, 16 (4). pp. 323-329. ISSN 1618-7229

Sahari, Japar and Sapuan, S.M. and Zainudin, E.S. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul and Zuhri, Mohd Y M and Akhtar, Riaz (2017) Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis, 14 (2 (Thematic Issue)). pp. 227-232. ISSN 1570-1794 E-ISSN 1875-6271

Saidin, Norazlina and Kamarozaman, Nurul Farhana Husna and Roslan, Farah Sakiinah and Md Ralib @ Md Raghib, Aliza Aini and Lim, Kok Sing (2021) Graphene-oxide coated on fiber Bragg Grating for temperature sensor. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE), 22-23 June 2021, Online Event.

Sakiru, Adeleke and Md. Abdul, Maleque and Shahjahan, Mridha (2015) Thin surface layers of iron-based alloys deposited by TIG hardfacing. Tribology Online, 10 (6). pp. 434-440. ISSN 1881-2198

Salahuddin, Ahmad Shakirin and Ayob, Mohd Fairullazi (2023) Comparative life cycle cost analysis of solar panel systems different brands in Malaysia. In: INTERNATIONAL COMPETITION ON SUSTAINABLE EDUCATION 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Samat, Noorasikin and Marini, Che Dini and Maritho, Muna Athirah and Sabaruddin, Fatimah Atiyah (2013) Tensile and impact properties of polypropylene/microcrystalline cellulose treated with different coupling agents. Composite Interfaces, 20 (7). pp. 497-506. ISSN 0927-6440

Samat, Noorasikin and Mohd Yusoff, Muhammad Alif and Zakaria, Mohd Shahrul Rizal (2011) The effect of hard nanofillers on mechanical properties of PVC nanocomposites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 29-33. ISBN 9789674182311

Samat, Noorasikin and Whittle, Allan and Hoffman, Mark (2011) Fatigue fracture mechanism of PVC/CaCO3 nanocomposite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 34-39. ISBN 9789674182311

Saparudin, Nurain Asrin and Kasim, Norhidayu and Abu Taib, Kamarudin and Wan Azahar, Wan Nur Aifa and Kasim, Nur Aisyah and Ali, Maisarah (2022) Improvement of problematic soil using crumb rubber tyre. IIUM Engineering Journal, 23 (2). pp. 72-84. ISSN 1511-788X E-ISSN 2289-7860

Sarifuddin, Norshahida (2020) TRIBOLOGICAL PROPERTIES OF HYBRID COMPOSITES BASED ON WOVEN CARBON FIBER/FINE KENAF FABRIC REINFORCED EPOXY MATRIX FOR AUTOMOTIVE APPLICATION. Project Report. UNSPECIFIED. (Unpublished)

Sarifuddin, Norshahida and Ahmad, Zuraida (2011) The influence of biopolymer and natural fiber on the physical and mechanical properties of cement composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 55-61. ISBN 9789674182311

Sarifuddin, Norshahida and Ahmad, Zuraida and Ismail , Hanafi (2013) The effect of kenaf core fibre loading on properties of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites. Journal of Physical Science , 24 (2). pp. 97-115. ISSN 1675-3402

Sarifuddin, Norshahida and Ismail, Hanafi (2016) Studies of polyethylene-based biocomposites, bionanocomposites and other non-biobased nanocomposites. In: Polyethylene-Based Biocomposites and Bionanocomposites. Wiley-Scrivener, John Wiley & Sons, Inc., Hoboken, NJ, USA., pp. 315-344. ISBN 9781119038450

Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2014) Influence of halloysite nanotubes hybridized with kenaf core fibers on the physical and mechanical properties of low density polyethylene/thermoplastic sago starch blends. Polymer-Plastics Technology and Engineering, 53. pp. 107-113. ISSN 1525-6111 (O), 0360-2559 (P)

Setiawan, Asep Ridwan and Ani, Mohd Hanafi and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Oxygen permeability through internal oxidation zone in Fe–Cr alloys under dry and humid conditions at 973 and 1 073 K. ISIJ International, 50 (2). pp. 259-263. ISSN 1347-5460 (O), 0915-1559 (P)

Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Progresses and challenges of composite laminates in thin-walled structures: a systematic review. ACS Omega, 8 (34). pp. 30824-30837. E-ISSN 2470-1343

Shahruddin, Najlah Sakinah and Mustaffa, Nur Haifa Syazwina and Mustafa, Aisyah Madihah and Abd Halim, Nor Farah Huda (2021) An experimental study of tool wear during end milling of carbon fibre reinforced polymer in cutting fluid condition. In: 7th International Conference on Applications and Design in Mechanical Engineering (ICADME 2021), 23 August 2021, UniMAP , Perlis.

Shaufe, N. A. and Maleque, Md. Abdul and Saleh, Abu Ahmed and Paruka, Perowansa (2015) Effect of temperature on the wear properties of alloy steel under jatropha curcas biodiesel. Advanced Materials Research, 1115. pp. 203-206. ISSN 1022-6680

Sirat, Mohamad Shukri and Johari, Muhammad Hilmi and Mohmad, Abdul Rahman and Mohammad Haniff, Muhammad Aniq Shazni and Ani, Mohd Hanafi and Syono, Mohd Ismahadi and Mohamed, Mohd Ambri (2022) Uniform growth of MoS2 films using ultra-low MoO3 precursor in one-step heating chemical vapor deposition. Thin Solid Films, 744. pp. 1-8. ISSN 0040-6090

Sirat, Mohd Shukri and Ismail, Edhuan and Purwanto, Hadi and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2017) Growth conditions of graphene grown in Chemical Vapour Deposition (CVD). Sains Malaysiana, 46 (7). pp. 1033-1038. ISSN 0126-6039

Sohu, Samiullah and Md Kassim, Tahara Ramadzan and Shahid Khan, Omar (2024) Critical risk factors influencing time schedule of residential projects in Pakistan. Engineering, Technology & Applied Science Research, 14 (1). pp. 12636-12639. ISSN 2241-4487 E-ISSN 1792-8036

Sopyan, Iis (2015) Bone implant materials from eegshell waste. Applied Mechanics and Materials, 776. pp. 282-288. ISSN 1662-7482

Sopyan, Iis (2015) Magnesium doped hydroxyapatite through mechanochemical synthesis. Advanced Materials Research, 1087. pp. 329-333. ISSN 1662-8985

Sopyan, Iis and -, Gunawan and -, Suryanto (2015) Sol-gel derived zinc doped calcium phosphate bioceramics prepared via different sintering strategies. Advanced Materials Research, 1115. pp. 341-344. ISSN 1022-6680

Sopyan, Iis and -, Suryanto and Fadli, Ahmad and Ramesh, Singh (2013) Protein foaming-consolidation method for fabrication of high performance porous bioceramics. Advanced Materials Research, 622-23. pp. 1759-1763. ISSN 1022-6680

Sopyan, Iis and ., Nor Hafizah (2015) Cement bonded sol-gel TiO2 powder photocatalysis for phenol removal. Applied Mechanics and Materials, 776. pp. 271-276. ISSN 1660-9336

Sopyan, Iis and Fadli, Ahmad and Mel, Maizirwan (2011) Effect of hydroxyapatite and tricalcium phosphate addition on protein foaming-consolidation porous alumina. Journal of Porous Materials. ISSN 1380-2224 (P), 1573-4854 (O)

Sopyan, Iis and Gunawan, Gunawan and Shah, Qasim Hussain and Mel, Maizirwan (2016) Fabrication and sintering behavior of zinc-doped biphasic calcium phosphate bioceramics. Materials and Manufacturing Processes, 31 (6). pp. 713-718. ISSN 1042-6914 E-ISSN 1532-2475

Sopyan, Iis and Gunawan, Syauqi (2015) Thermal analysis on dehydroxylation of sol-gel derived zinc doped calcium phosphate powders. Advanced Materials Research, 1115. pp. 353-356. ISSN 1662-8985

Sopyan, Iis and Hablee, Sufiamie and Razali, Nurul Nabilah (2019) Straightforward synthesis of injectable calcium phosphate cement through novel hydrthermal technique for bone filling materials. Research Report. UNSPECIFIED. (Unpublished)

Sopyan, Lis and Pusparini, Erlani and Subramaniam, Ramesh T. and Tan, Chou Yong and Ching, Yernchee and Wong, Yinhow and Zainal Abidin, Nor Ishida and Chandran, Hari and Ramesh, S. and Bang, Lethi (2017) Influence of sodium on the properties of sol-gel derived hydroxyapatite powder and porous scaffolds. Ceramics International, 43 (15). pp. 12263-12269. ISSN 0272-8842

Surip, S.N. Surip and Wan Jaafar, W.N.R. and Azmi, N.N. and Hassan, Noor Azlina (2016) Biodegradation properties of poly (Lactic) acid reinforced by kenaf fibers. ACTA PHYSICA POLONICA A, 129. pp. 835-837. ISSN 0587-4246 E-ISSN 1898-794X

Suryanto, - and Ani, Mohd Hanafi and Yaacob, Iskandar Idris and Haider I., Farag (2018) FUNDAMENTAL STUDY ON METAL DUSTING PREVENTION OF AISI 316 STAINLESS STEELS BY USING COPPER COATING. Project Report. UNSPECIFIED. (Unpublished)

Sutjipto, Agus Geter Edy (2007) Surface breakdown property of SiO2 added MgO under electron bombardment in vacuum: a promising materials for spacecraft and space station. Canadian Journal of Pure and Applied Sciences, 1 (1). pp. 73-77. ISSN 1715-9997

Sutjipto, Agus Geter Edy (2007) The effect of CaO addition on the microstructural, mechanical and dielectric properties of pure MgO ceramic. Key Engineering Materials, 345-46. pp. 1609-1612. ISSN 1013-9826

Sutjipto, Agus Geter Edy and , Afzeri and Shafie, Amir Akramin (2011) Recent nanofabrication of silicon dioxide on silicon wafer using AFM operated at low temperature. Applied Mechanics and Materials, 84-85. pp. 317-320. ISSN 1660-9336

Sutjipto, Agus Geter Edy and Takata, Masasuke (2007) The use of SEM to investigate the effect of an electron beam on the optically-visible flashover treeing of MgO ceramic. Journal of Materials Science, 42. pp. 6036-6040. ISSN 1573-4803 (O), 0022-2461 (P)

Syauqi Syahid Mohammed, Nadia and Mat Harttar, Maziati Akmal and Ahmad, Farah (2022) Fabrication of biopolymer-based piezoelectric thin film from chitosan using solvent casting method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 80-89. E-ISSN 2462-1943

Syed Abdullah, Syed Idros and Mahamad Puzi, Mohamad Syatbi and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Design and fabrication of industrial welding robotic arm. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 58-63. ISBN 9789674181598

Syed Abdullah, Syed Idrus Bin and Iannucci, Lorenzo and Greenhalgh, Emily S and Abdullah, Nur Azam (2022) The delamination behaviour of Vectran/Epoxy composites having a novel non-crimp fabric architecture. Composites Part B: Engineering, 228 (109413). pp. 1-12. ISSN 1359-8368 E-ISSN 1879-1069

Syed Abu Bakar, Sharifah Adzila and Sopyan, Iis and Singh, Ramesh and Pusparini, Erlani (2013) Mechanochemical synthesis of sodium doped hydroxyapatite powder. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry, 52A. pp. 739-743. ISSN 0975-0975 (O), 0376-4710 (P)

Syed Azmi, Syarifah Farishaidayu and Ayob, Mohd Fairullazi (2023) Sustainable concrete: graphene enhanced concrete. In: International Competition on Sustainable Education 2023 (SUSED 2023), 29 November 2023, Akademi Pengajian Bahasa (APB), Universiti Teknologi MARA (UiTM), Cawangan Negeri Sembilan, Malaysia.. (Unpublished)

Syed Putra, Sharifah Shahira and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Sulaiman, Sarina and Jamal, Parveen and Ahmad Nor, Yusilawati (2018) Surface functionalisation of Microfibrillated Cellulose (MFC) of cocoa pod husk with Ƴ-Methacryloxypropyltrimethoxysilane (MPS). In: The 3rd International Conference on Green Chemical Engineering and Technology (GCET 2017), 7th-8th Nov. 2017, Swiss-Garden Hotel Melaka.

Syed Shaharuddin, Sharifah Imihezri and Qairol, A.A.B. and H. Noor, Azlina and Muhamad Khairussaleh, Nor Khairusshima (2017) Thermal, structural and mechanical properties of melt drawn curloaded poly(lactic acid) fibers. In: Advances in Material & Processing Technologies Conference 2017(AMPT 2016), 11th-14th December 2017, Chennai, India.

T

T., Maisarah and A., Zuraida and H., Zahurin and I., Hanafi and Md. Abdul, Maleque (2015) Morphological structures of rattan waste binderless particleboard: effect of acid treatment. MicroSOM (Buletin of the Microscopy Society Malaysia, MSM), 13 (2). pp. 11-13. ISSN 1511-760X

T., Maisarah and Ahmad, Zuraida and A., Roszalia and M.A, Luqman (2015) Characterization of rattan waste for binderless particleboard (BPB) production. Advanced Materials Research, 1115. pp. 317-320. ISSN 1662-8985

T., Maisarah and Ahmad, Zuraida and A., Marjan (2015) The effect of black liquor on rattan waste binderless board (BPB) produced via digestion-hot pressing (DHP) process. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9753-9758. ISSN 1819-6608

Teoh, Swin Le and Samannamunthaliar, Kumaran and Ahmad, Zuraida (2011) Mechanical behaviour of Biopolymer Cotton Albumen Clay (BCAC) composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 144-149. ISBN 9789674182311

Thauri, Shahdura Hammad and Mohamed Ariff, Tasnim Firdaus and Karim, A.N. Mustafizul (2011) Study of TiC cutting tool insert using microwave synthesis. Applied Mechanics and Materials, 52-54. pp. 2116-2121. ISSN 1660-9336

Tolouei, Ranna and Singh, Ramesh and Sopyan, Iis and Yong, Tan Chou and Amiriyan, Mahdi and Dung, Teng Wan (2011) Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics. Materials Science Forum, 694. pp. 391-395. ISSN 0255-5476

U

Uba, Muhammad Abdulazeez and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Representative Nigerian anthropometric data for automotive applications. Journal of Mechanical Engineering, 5 (Specialissue 4). pp. 68-88. ISSN 1823-5514

Unno, Toshinori and Toriyama, Toshiyuki and Bhuiyan, Moinul and Yokoyama, Yoshihiko and Sugiyama, Susumu (2002) Micro connector for high packaging density fabricated by using UV Thick Photoresist. Denki Gakkai Ronbunshi. E, Sensa, Maikuromashin Bumonshi / IEEJ Transactions on Sensors and Micromachines , 5 (122). pp. 249-255. ISSN 1341-8939

Urmi, Wajiha Tasnim and A.S, Shafiqah and Rahman, Md Mustafizur and Maleque, Md. Abdul and Kadirgama, Kumaran (2021) Preparation methods and challenges of hybrid nanofluids: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2). pp. 56-66. E-ISSN 2289-7879

W

Walvekar, Rashmi Gangasa and Ismail, Ahmad Faris and Khalid, Mohammad (2012) Thermal conductivity of carbon nanotube nanofluid—experimental and theoretical study. Heat Transfer—Asian Research, 41 (2). pp. 145-163. ISSN 1099-2871

Wan Yusoff, Wan Ahmad Yusmawiza and Adesta, Erry Yulian Triblas and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda (2011) The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, 22 - 24 Jan 2011, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Hayyun, Muhammad Fakhrani and Abdullah, Mohd Fairus (2011) The study of the implementation of OHSAS: 18001 at Kulliyyah of Engineering. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 113-120. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Kamarudin , Muhammad Ridhuan and Mohd Salimi , Noor Iliana (2011) Reverse engineering for rapid prototyping of automotive components. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 50-56. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Md Noraini, Muhammad Fauzan and Ismail, Mohd Norazrul (2011) Performance measurement of SMEs manufacturing sector in Malaysia. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 98-103. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Mohd, Aziatul Ashikin and Abdul Rahim, Siti Maznah (2011) The introduction of fit manufacturing as a performance measuring approach towards sustainability of selected manufacturing companies in Malaysia. In: Design for manufacture: towards improved manufacturabilit. IIUM Press, Kuala Lumpur, pp. 105-112. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Roberts, Paul (2011) Implementation of FMECA on Fixed Assembly Cell (FAC). In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 121-128. ISBN 9789674181598

Y

Yaacob, Iskandar Idris (2011) Synthesis and characterization of nickel iron–silicon nitride nanocomposite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 167-171. ISBN 9789674182311

Yaacob, Iskandar Idris and H.K., Jun (2011) Investigation of mechanically alloyed Nd-Fe-B powder. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 17-22. ISBN 9789674182311

Yunus, Nurul Azhani and Ani, Mohd Hanafi and Purwanto, Hadi and Mohd. Salleh, Hamzah and Zamani Abd Rashid, Rusila and Akiyama, Tomohiro (2013) Magnetization of low grade iron ore using empty fruit bunch ash. Advanced Materials Research, 701. pp. 141-144. ISSN 1022-6680

Yunus, Nurul Azhani and Ani, Mohd Hanafi and Purwanto, Hadi and Mohd. Salleh, Hamzah and Zamani Abd Rashid, Rusila and Akiyama, Tomohiro (2012) Reduction of briquette composite made of low grade from ore and biomass ash. SEAISI Quarterly Journal, 41 (4). pp. 12-16. ISSN 0129-5721

Yusof, Faridah and Mubarak, N. M. and Al-Khatib, Ma An Fahmi Rashid and Al Saadi, M. A. and Khalid, M. (2010) Statistical optimization of carbon nanotubes production by DS-CVD and its application in protein purification. World Journal of Engineering, 7 (4). pp. 282-289. ISSN 1708-5284

Yusof, Faridah and Salawudeen, T. Olalekan and Shah, Qasim Hussain and Al-Khatib, Ma An Fahmi Rashid and Muyibi, Suleyman Aremu (2011) Chemical resistance tests on PP-ternary nanocomposite for its application in bioreactor liner fabrication. Science China Technological Sciences, 54 (8). pp. 2217-2223. ISSN 1869-1900 (O), 1674-7321 (P)

Yusof, Yusliza and Ahmad, Zuraida and Iis, Sopyan (2008) Fracture behavior of natural fiber reinforced biopolymer matrix composite. Advanced Materials Research, 47. pp. 1189-1192. ISSN 1022-6680

Yussof, Farrah and Ahmad, Zuraida (2011) An investigation of hybrid composites tubes subjected to quasi-static loading. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 138-143. ISBN 9789674182311

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Ahmad, Zuraida (2019) Mechanical properties of woven carbon fiber/kenaf fabric reinforced epoxy matrix hybrid composites. MALAYSIAN JOURNAL OF MICROSCOPY, 15 (1). pp. 10-16. ISSN 1823-7010 E-ISSN 2600-7444

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohamad Badari, Siti Norbahiyah and Mohd Ali, Afifah and Ismail, Hanafi (2020) Tensile and flexural properties of woven carbon-kenaf fiber reinforced epoxy matrix hybrid composite: effect of hybridization and stacking sequences. In: 3rd International Postgraduate Conference on Materials, Minerals and Polymer (MAMIP 2019), 31st Oct - 1st Nov. 2019, Penang.

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohd Ali, Afifah (2020) A review on kenaf fiber hybrid composites: mechanical properties, potentials, and challenges in engineering applications. Progress in Rubber, Plastics and Recycling Technology, Early Access. pp. 1-18. ISSN 1477-7606 E-ISSN 1478-2413 (In Press)

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohd Ali, Afifah and Ismail, Hanafi and Mohamad, Siti Norbahiyyah (2020) Effect of stacking sequences on mechanical properties of kenaf hybrid composites. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd-24th July 2019, Kangar; Perlis.

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohd Ali, Afifah and Mohd Daud, Farah Diana and Mohamad Badari, Siti Norbahiyah (2020) A comparative study on mechanical properties of carbon and Kenaf composites via vacuum infusion technique. Journal of Engineering Science, 16 (1). pp. 97-107. ISSN 2180-4214

Z

Za'bah, Nor Farahidah and Kwa, Kelvin S. K. and Bowen, Leon and Mendis, Budhika and O'Neill, Anthony (2012) Top-down fabrication of single crystal silicon nanowire using optical lithography. Journal of Applied Physics, 112. 024309-024309. ISSN 0021-8979

Za'bah, Nor Farahidah and Kwa, Kelvin S. K. and O'Neill, Anthony (2013) The study on the aspect ratio of Atomic Force Microscope (AFM) measurements for Triangular Silicon Nanowire. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013), 25-27 September 2013, Langkawi, Malaysia. (In Press)

Za'bah, Nor Farahidah and Kwa, Kelvin S. K. and O’Neill, Anthony (2014) Electrical characterisation of highly doped triangular silicon nanowires. Applied Mechanics and Materials, 660. pp. 168-172. ISSN 1660-9336

Zainal, Muhammad Talhah and Mohd Yasin, Mohd Fairus and Wan Ali, Wan Fahmin Faiz and Tamrin, Khairul Fikri and Ani, Mohd Hanafi (2020) Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi‐empirical approach. Carbon Letters, Early Access. pp. 1-11. ISSN 1976-4251 E-ISSN 2233-4998

Zakaria, Mohammad and -, Suryanto and Hilmy, Irfan (2015) Effects of surfactant on corrosion behavior of carbon steel in simulated crude oil. Advanced Material Research, 1115. 223-225. ISSN 1662-8985

Zakaria, Mohammad and Suryanto, - and Hilmy, Irfan (2014) Effects of surfactant on corrosion behavior of carbon steel in simulated eor crude oil. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Zamani Abd Rashid, Rusila and Purwanto, Hadi and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Akiyama, Tomohiro and Yunus, Nurul Azhani (2013) Carbon doped iron ore using palm kernel shell. Advanced Materials Research, 701. pp. 28-31. ISSN 1022-6680

Zamlia, Mohamad Izzuddin and Mohd Hatta, Maziati Akmal and Ahmad, Farah and Hisham, Firzanah (2022) Piezoelectric performance of microbial chitosan thin film derived from aspergillus oryzae. International Journal of Renewable Energy Development, 11 (4). pp. 1157-1164. ISSN 2252-4940

Zubir, Nazira and Pingguan-Murphy, Belinda and Azari, P. (2016) Fabrication and Characterization of Polycaprolactone (PCL)-Silk-Hydroxyapatite (HA) based scaffold. Research Report. UNSPECIFIED. (Unpublished)

Zubir, Nazira and Pushpanathan,, K (2016) Silk in biomedical engineering: A review. International Journal of Engineering Inventions (IJEI), 5 (8). pp. 18-29. ISSN 2319-6491 E-ISSN 2278-7461

Zulkepli, I I and Mokhtar, Hanan and Shaik Dawood, M S I and Aminanda, Yulfian and Muhamed Rehan, M S (2020) Computational analysis of low velocity impacts on Empty Fruit Bunch (EFB) composite. TEST Engineering & Management, 83 (May - June 2020). pp. 1242-1247. ISSN 0193-4120

Zulkepli, I.I. and Mokhtar, Hanan and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Mohamed Rehan, Muhammad Saifuddin (2020) Experimental study on Empty Fruit Bunch (EFB) composite subjected to three point bending using ANOVA technique. TEST Engineering & Management, 83 (May – June 2020). pp. 1248-1255. ISSN 0193-4120

Zulkifli, Nur Izzati and Samat, Noorasikin (2013) Mechanical properties of green recycled polypropylene composites: effect of maleic anhydride grafted polypropylene (MAPP) coupling agent. Advanced Materials Research, 812. pp. 187-191. ISSN 1022-6680

This list was generated on Tue Mar 19 12:41:12 2024 +08.