IIUM Repository

Items where Division is "Kulliyyah of Engineering" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type | No Grouping
Jump to: , | - | . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 510.

,

, Abdul Wahid and Khan, Adnan Umar and , Mukhtarullah and Khan, Sheroz and Shah, Jawad (2019) A multilayered convolutional sparse coding framework for modeling of pooling operation of convolution neural networks. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

-

-, Salma and Olanrewaju, Rashidah Funke and Abdullah, Khaizuran and -, Rusmala and Darwis, Herdianti (2019) Enhancing cloud data security using hybrid of advanced encryption standard and Blowfish encryption algorithms. In: 2nd East Indonesia Conference on Computer and Information Technology, EIConCIT 2018, 6th - 7th Nov. 2018, Novotel Hotel Makassar, Indonesia.

.

., Salma and Olanrewaju, Rashidah Funke and Morshidi, Malik Arman (2019) Smart parking guidance system using 360o camera and haar-cascade classifier on IoT system. International Journal of Recent Technology and Engineering, 8 (2, Special issue 11). pp. 864-872. ISSN 2277-3878

A

A, Wahyudi and L, Hendraningsih and , Sutawi and Setyobudi, Roy Hendroko and Maizirwan, Mel (2019) Fermentation quality of Pennisetum purpureum cv. Mott ensiled with Lactobacillus plantarum and sugarcane molasses in tropic. IOP Conf. Series: Earth and Environmental Science, 293 (012007). pp. 1-7. ISSN 1755-1307 E-ISSN 1755-1315

A. Elsheikh, Elfatih A. and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Ismail, Ahmad Fadzil and Elshaikh, Z. E. O. and Suliman, F.M. and Chebil, Jalel (2019) Analysis of airborne dust effects on terrestrial microwave propagation in arid area. Bulletin of Electrical Engineering and Informatics (BEEI), 8 (3). pp. 1014-1021. ISSN 2089-3191 E-ISSN 2302-9285

A. Rahim, Syazwani and Muthalif, Asan G. A. and Turahim, Khairiah Kamilah and Nordin, Nor Hidayati Diyana (2019) Active Vibration Isolation System (AVIS) using a voice coil actuator to improve free space optics communication. In: "10th IEEE Control and System Graduate Research Colloquium, ICSGRC 2019", 2- 3 August 2019, Shah Alam.

AL Mamari, Adnan Saidf Said and Toha, Siti Fauziah (2019) Voltage stability improvement and transmission loss minimization for a 5-Bus Oman system based on modal analysis and reactive power compensation. International Journal of Innovative Science and Research Technology, 4 (8). pp. 442-448. ISSN 2456-2165

Aabid, Abdul and Afifi, Azmil and Mehaboobali, Fharukh Ahmed Ghasi and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2019) CFD analysis of splitter plate on bluff body. CFD Lettrs, 11 (11). pp. 25-38. ISSN 2180-1363

Aabid, Abdul and Chaudhary, Zakir Ilahi and Khan, Sher Afghan (2019) Modeling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 34-51. ISSN 2289-7879 E-ISSN 2289-7879

Aabid, Abdul and Chaudhary, Zakir Ilahi and Khan, Sher Afghan (2019) Modelling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 34-51. ISSN 2289-7879

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Modeling different repair configurations of an aluminum plate with a hole. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 235-240. ISSN 2277-3878

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2019) Effect of bonded composite patch on the stress intensity factor for a center cracked plate. IIUM Engineering Journal, 20 (2). pp. 211-221. ISSN 1511-788X E-ISSN 2289-7860

Aabid, Abdul and Khan, Ambareen and Mazlan, Nur Musfira and Ismail, Mohd Azmi and Akhtar, M. Nishat and Khan, Sher Afghan (2019) Numerical simulation of suddenly expanded flow at Mach 2.2. International journal of Engineering & Advanced Technology (IJEAT), 8 (3). pp. 457-462. ISSN 2249-8958

Abd Halim, Noor Hafizah Azlin and Sidek, Khairul Azami and Mansor, Hasmah (2019) Stress recognition using photoplethysmogram (PPG) signal incorporating gender and age variability. In: Lecture Notes on Advanced Research in Engineering and Information Technology II. Malaysia Technical Scientist Association, Ayer Keroh, Melaka, pp. 83-90.

Abd Halin, Nur Iilani and Alkhatib, Ma'an Fahmi Rashid and Mohd. Salleh, Hamzah and Nasef, Mohamed Mahmoud (2019) Immobilization of candida rugosa lipase on aminated polyvinyl benzyl chloride-grafted nylon-6 microfibers. Bulletin of Chemical Reaction Engineering & Catalysis, 14 (2). pp. 369-379. ISSN 1978-2993

Abd Mutalib, Mohd Azri and Zainul Azlan, Norsinnira and Mahmood, Iskandar Al-Thani (2019) Modelling of mobility mechanism for Motorized Adjustable Vertical Platform (MAVeP). In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Abd Rahman, Badruzzaman and Mohd Sohimin, Muhammad H F and Meor Said, Mior A and Tuan Kamaruddin, Tengku Nordayana Akma and Abu Husain, Nurulakmar and Mohamad Jamil, Siti Nurnadilla and Balaka, Ridway and Abu Kassim, Khairil A (2019) Rearward visibility assessment and a proposed performance scoring for ASEAN NCAP. In: 4th International Conference & Sustainable Mobility (ICSM), 21st-22nd November 2019, Bali, Indonesia. (Unpublished)

Abd Rashid, Mohd Warikh and Mohd Hatta, Maziati Akmal and Chahit, Dyana and Noh, Mohamad Zaky and Mohamed, Julie Juliewatty and Muhamad Nor, Mohd Al Amin (2019) The effects of different pyrolysis and annealing temperature on structural and resistivity of K0.5Na0.5NbO3 thin film. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), 18th-19th August 2018, Kota Baharu, Kelantan.

Abd-Wahab, Mohd. Firdaus and Abdul Guthoos, Habibah Farhana and Wan Salim, Wan Wardatul Amani (2019) Solid-state rGO-PEDOT:PSS transducing material for cost-effective enzymatic sensing. Biosensors, 9 (1). pp. 1-15. ISSN 2079-6374

Abd-alla, Abo-el-nour N. and Othman, Mohamed I.A and Hasbullah, Nurul Fadzlin (2019) Shear horizontal waves in composite materials: behavior under rotation and initial stress. Mathematics and Mechanics of Solids, 24 (1). pp. 85-97. ISSN 1081-2865 E-ISSN 1741-3028

Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Buys, Yose Fachmi and Hassan, Noor Azlina (2019) Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), 18th-19th August 2018, Kota Baharu, Kelantan.

Abdul Aziz, Mohammad and Embong, Abd Halim and Rashid, Muhammad Mahbubur and Saadeddin, Mhd Salim (2019) Design and material analysis of regenerative dispersion Magnetorheological (MR) damper. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 305-307. ISSN 2277-3878

Abdul Aziz, Mohammad and Rashid, Muhammad Mahbubur and Roy, Rupal and ., Arifuzzaman (2019) Design and performance test of a compressed air operated reciprocating machine. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 210-215. E-ISSN 2277-3878

Abdul Halim, Abdul Karim and Syed Mohamed Ali, Jaffar and Erwin, Sulaeman (2019) Prediction of buckling mode for simply supported stiffened thin plates subject to inplane loading. In: 11th International Conference On Numerical Analysis In Engineering Conference In Numerical Analysis In Engineering (NAE) 2019, 20th-22 August 2019, Bangi, Selangor. (Unpublished)

Abdul Hamid, Abd. Malek and Zainuddin, Zaid Aqil (2019) Smartphone usage: how is technology affecting your health? In: Being human: responding to changes. Partridge, Singapore, pp. 71-100. ISBN 978-1-5437-4913-7

Abdul Malek, Norun and Che Sabri, Nur Alyaa and Islam, Md. Rafiqul and Mohamad, Sarah Yasmin and Mohd Isa, Farah Nadia (2019) Design of Hybrid Koch-Minkowski fractal dipole antenna for dual band wireless applications. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 25th- 27th November 2019, Malacca, Malaysia. (Unpublished)

Abdul Malik, Noreha and Wahid, Zaharah and Ibrahim, Siti Noorjannah and Gunawan, Teddy Surya and Khan, Sheroz (2019) Investigation of lower limb’s muscles activity during performance of salat between two age groups. Indonesian Journal of Electrical and Computer science, 14 (2). pp. 608-617. ISSN 2502-4752 E-ISSN 2502-4760

Abdul Molok, Salma and Hamidon, Nor Ezzati and Ahmad Azhar, Ahmad Zahirani and Manshor, Hanisah and Rejab, Nik Akmar and Ahmad, Zainal Arifin and Mohd. Ali, Afifah (2019) Analysis on physical and microstructural properties of ZTA-SWNT ceramic cutting tool. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), 18th-19th August 2018, Kota Baharu, Kelantan.

Abdul Mudalip, Siti Kholijah and Abu Bakar, Mohd Rushdi and Jamal, Parveen and Adam, Fatmawati (2019) Prediction of mefenamic acid solubility and molecular interaction energies in different classes of organic solvents and water. Industrial & Engineering Chemistry Research, 58 (2). pp. 762-770. ISSN 0888-5885

Abdul Rani, Nabila Syafiqa and Ibrahim, Siti Noorjannah and Zahangir, Musanna and Abdul Malik, Noreha (2019) Characterization of electroplated permalloy film on microstructure for Bio-MEMS application. In: "2019 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2019", 21 - 23 Aug 2019, Genting Highland, Pahang.

Abdullah, Ali Mohammed Noman and Htike@Muhammad Yusof, Zaw Zaw (2019) Vision-based smoke detector. International Journal of Engineering & Technology. ISSN 2227-524X (In Press)

Abdullah, Aziera and Yusoff, Siti Hajar and Zaini, Syasya Azra and Midi, Nur Shahida and Mohamad, Sarah Yasmin (2019) Energy efficient smart street light for smart city using sensors and controller. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 558-568. ISSN 2089-3191 E-ISSN 2302-9285

Abdullah, Khaizuran and Boby, Rounakul Islam and Mahmud, Md and Mosammat, Saidatunnesa (2019) SIC-MMSE method based wireless precoding technique for millimetre-wave MIMO system. Indian Journal of Science and Technology, 12 (9). pp. 1-11. ISSN 0974-6846 E-ISSN 0974-5645

Abdullah, Yusof and Hedzir, Anati Syahirah and Hasbullah, Nurul Fadzlin and Che Hak, Cik Rohaida (2019) Study on capacitance performance of gallium nitride (GaN) diodes in high dose electron irradiation. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), 18th-19th August 2018, Kota Baharu, Kelantan.

Abdullahi, Salami Ifedapo and Che Mustapha, Nurul Arfah and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2019) Accelerometer based structural health monitoring system on the go: Developing monitoring systems with NI LabVIEW. International Journal of Online and Biomedical Engineering (iJOE), 15 (7). pp. 32-51. E-ISSN 2626-8493

Abdullahi, Salami Ifedapo and Habaebi, Mohamed Hadi and Abdul Malik, Noreha (2019) Capacitive electrode sensor implanted on a printed circuit board designed for continuous water level measurement. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 452-461. ISSN 2089-3191 E-ISSN 2302-9285

Abdullahi, Salami Ifedapo and Habaebi, Mohamed Hadi and Abdul Malik, Noreha (2019) Intelligent flood disaster warning on the fly: developing IoT-based management platform and using 2-class neural network to predict flood status. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 708-719. ISSN 2089-3191 E-ISSN 2302-9285

Abdullahi, Salami Ifedapo and Habaebi, Mohamed Hadi and Abdul Malik, Noreha (2019) Intelligent flood disaster warning on the fly: developing IoT-based management platform and using 2-class neural network to predict flood status. Bulletin of Eletrical Engineering and Informatics, 8 (2). pp. 706-717. ISSN 2089-3191 E-ISSN 2302-9285

Aboadla, Ezzidin Hassan Elmabrouk and Khan, Sheroz and Habaebi, Mohamed Hadi and Gunawan, Teddy Surya and Hamida, Belal Ahmed and Mashkuri, Yaacob and Aboadla, Ali (2019) A novel optimization harmonic elimination technique for cascaded multilevel inverter. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 405-413. ISSN 2089-3191 E-ISSN 2302-9285

Abu Bakar, Ayu Haslija and Alkhatib, Ma'an Fahmi Rashid and Chuah Abdullah, Luqman and Mohd Zahri, Nur Amirah (2019) Column efficiency of fluoride removal using Quaternized Palm Kernel Shell (QPKS). International Journal of Chemical Engineering, 2019. pp. 1-13. ISSN 1687-806X E-ISSN 1687-8078

Abu Hanifah, Rabiatuladawiyah and Toha, Siti Fauziah and Mohamad Hanif, Noor Hazrin Hany and Kamisan, Nor Azam (2019) Electric motorcycle modeling for speed tracking and range travelled estimation. IEEE Access, 7. pp. 26821-26829. ISSN 2169-3536

Adedi, Muhammad Rahman and Syed Mohamed Ali, Jaffar and Hrairi, Meftah (2019) A new higher order theory for analysis of orthotropic cylindrical shell under electromechanical load. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 749-753. ISSN 2249 – 8958

Adesta, Erry Yulian Triblas and Hilmy, Irfan and ,, Avicenna and Agusman, D. (2019) Toward real time IoT based paste monitoring system for small to medium enterprise (SME). In: 2nd Forum in Research, Science, and Technology (FIRST 2018), 30th–31st October 2018, Palembang, Indonesia.

Adnan, Sumayyah and Gunawan, Teddy Surya and Nasir, Haidawati and Kartiwi, Mira (2019) Development of social network analysis platform. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

Afzal, Asif and Khan, Sher Afghan and Saleel, Ahmed (2019) Role of ultrasonication duration and surfactant on characteristics of ZnO and CuO nanofluids. Materials Research Express, 6 (11). pp. 1-13. ISSN 2053-1591 E-ISSN 2053-1591

Agel, Mabruka Mohamed and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2019) Mitigation of multipath fading in indoor radiometric fingerprinting systems. Computers and Electrical Engineering, 73 (1). pp. 46-57. ISSN 0045-7906

Ahamad, Nurul Nazihah and Mohamad, Sarah Yasmin and Midi, Nur Shahida and Yusoff, Siti Hajar and Abd Rahman, Faridah (2019) Automatic household waste separation system based on resistance value and moisture content. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 501-507. ISSN 2302-9285 E-ISSN 2302-9285

Ahamad Sukor, Masturah and Hedzir, Anati Syahira and Sabri, Sharizal Fadlie and Hasbullah, Nurul Fadzlin (2019) Single event transient effects on 3T and 4T CMOS active pixel sensors for different technologies. Australian Journal of Electrical and Electronics Engineering, 16 (3). pp. 117-126. ISSN 1448-837X E-ISSN 2205-362X (In Press)

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2019) The outlook of the production of advanced fuels and chemicals from integrated oil palm biomass biorefinery. Renewable and Sustainable Energy Reviews, 109. pp. 386-411. ISSN 1364-0321

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2019) The prospect of microbial oil production and applications from oil palm biomass. Biochemical Engineering Journal, 143. pp. 9-23. ISSN 1369-703X

Ahmad, Harith and Reduan, Siti Aisyah and Ruslan, N.E. and Lee, C.S.J and Zulkifli, Muhammad Zamani and Thambiratnam,, Kavintheran (2019) Tunable Q-switched erbium-doped fiber laser in the C-band region using nanoparticles (TiO2). Optics Communications, 435. pp. 283-288. ISSN 0030-4018

Ahmad, Kartini and Hanouf, Zahir (2019) Stagnation-point flow of Casson fluid in Darcy-Forchheimer porous media with newtonian heating effect. Journal of Engineering and Applied Sciences, 14 (2). pp. 315-319. ISSN 1816-949X

Ahmad, Kartini and Mohamed Isa, Siti Suzilliana Putri (2019) The exponential variation of heated extending sheet in Casson fluid flow. In: Embracing Mathematical Diversity: Selected papers from Seminar on Mathematical Sciences 2019 (SOMS2019). UPM PRESS, Serdang, Selangor, pp. 59-66. ISBN 978-967-2395-08-9

Ahmad, Kartini and Wahid, Zaharah and Hanouf, Zahir (2019) Mixed convection casson fluid flow over an exponentially stretching sheet with Newtonian heating effect. Journal Of Mechanics Of Continua And Mathematical Sciences, Special Issue (1). pp. 203-214. ISSN 0973-8975 E-ISSN 2454-7190

Ahmad, Mani Malam and Mohd Azoddein, Abd.Aziz and Mohd Zahari, Mior Ahmad Khusairi and Abu Seman, Mazrul Nizam and Jami, Mohammed Saedi and Abayomi, Olusegun and Ruth Alara, Oluwaseun (2019) Optimization of process parameters in mixed sulfide oxidation bacterial culture using response surface methodology as a tool. Journal of King Saud University – Science, 31 (4). pp. 836-843. ISSN 1018-3647

Ahmad, Salmiah and Syed Badruddin, Syarifah Nuratikah and Nik Hashim, Nik Nur Wahidah and Embong, Abd Halim and Altalmas, Tareq, M. and Shahbudin Hassan, Surul (2019) The modeling of the Quranic alphabets’ correct pronunciation for adults and children experts. In: 2019 2nd International Conference on Computer Applications & Information Security (ICCAIS), 1st-3rd May 2019, Riyadh, Kingdom of Saudi Arabia.

Ahmad, Yasser Asrul (2019) Jurutera December 2019 Working Towards the Future with IoT. The Monthly Bulletin of the Institution of Engineers Malaysia, JURUTERA. ISSN 01269909

Ahmad, Zuraida and Tajuddin, Maisarah and Maleque, Md. Abdul and Halim, Zahurin (2019) Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science, 15. pp. 49-61.

Ahmad Azhar, Ahmad Zahirani and Mohamad Shawal, Siti Hajar and Manshor, Hanisah and Mohd Ali, Afifah and Rejab, Nik Akmar and Chan Abdullah, Ezzat and Ahmad, Zainal Arifin (2019) The effects of CeO2 addition on the physical and microstructural properties of ZTA-TiO2 ceramics composite. Journal of Alloys and Compounds, 773. pp. 27-33. ISSN 0925-8388 E-ISSN 0925-8388

Ahmad Azhar, Ahmad Zahirani and Mohd Rosli, Muhammad Farhan and Manshor, Hanisah and Mohd Ali, Afifah (2019) The effect of dolomite addition onto the phases and hardness of zirconia toughened alumina. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel Kota Bharu, Kelantan; Malaysia.

Ahmad Puzi, Asmarani and Sidek, Shahrul Na'im and Md Yusof, Hazlina and Mohd Khairuddin, Ismail (2019) Objective analysis of muscle spasticity level in rehabilitation assessment. International Journal of Integrated Engineering, 11 (3). pp. 223-231. ISSN 2229-838X E-ISSN 2600-7916

Ahmad Puzi, Asmarani and Sidek, Shahrul Na'im and Mohd Khairuddin, Ismail and Md Yusof, Hazlina (2019) Inter-rater and intra-rater reliability of quantitative upper limb spasticity evaluation based on modified Ashworth scale tool. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences )IECBES 2018), 3rd-6th December 2018, Kuching, Sarawak.

Ahmad Qadri, Syed Asif and Gunawan, Teddy Surya and Alghifari, Muhammad Fahreza and Mansor, Hasmah and Kartiwi, Mira and Janin, Zuriati (2019) A critical insight into multi-languages speech emotion databases. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1312-1323. ISSN 2302-9285 E-ISSN 2302-9285

Ahmad Qadri, Syed Asif and Gunawan, Teddy Surya and Wani, Taiba and Alghifari, Muhammad Fahreza and Mansor, Hasmah and Kartiwi, Mira (2019) Comparative analysis of gender identification using speech analysis and higher order statistics. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

Ahmed, Houida and Bekbaev, Ural and Rakhimov, Isamiddin (2019) On two-dimensional power associative algebras over algebraically closed fields and R. Lobachevskii Journal of Mathematics, 40 (1). pp. 1-13. ISSN 1995-0802 E-ISSN 1818-9962

Ahmed, Kazi Istiaque and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2019) Smartphone aided real-time blood vein detection system. Bulletin of Electrical Engineering and Informatics (BEEI), 8 (3). pp. 1096-1107. ISSN 2089-3191 E-ISSN 2302-9285

Ahmed, Muhammed Zaharadeen and Hassan Abdalla Hashim, Aisha and Hassan, Afaf Mirghani and Khalifa, Othman Omran and Mohd Ramli, Huda Adibah and Alkali, Abdulkadir Hamidu (2019) Performance evaluation of scenerio-aware protocol for producer mobility support in NDN. In: 7th International Conference on Mechatronics Engineering (ICOM 2019), 30th-31st October 2019, Putrajaya.

Ahmed, Muhammed Zaharadeen and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Abdulkadir, H Alkali and Midi, Nur Shahida and Abd. Rahman, Faridah (2019) Evaluating mobility management models for content forwarding in named data networking environments. International Journal of Interactive Mobile Technologies (iJIM), 13 (4). pp. 47-60. E-ISSN 1865-7923

Ahmed, Musse Mohamud and Khalifa, Othman Omran (2019) Introduction to solar energy. In: Solar energy fundamentals, inverters and Systems. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 1-15. ISBN 978-967-418-4827

Ahmed, Musse Mohamud and Khalifa, Othman Omran and Khan, Sheroz (2019) Solar energy integration. In: Solar energy fundamentals, inverters and systems. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 63-78. ISBN 978-967-418-482-7

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2019) Experimental correlation for flow-boiling heat transfer in a micro-gap evaporator with internal micro-fins. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 1-8. ISSN 2289-7879

Ahmed, Zaheer and Syed Mohamed Ali, Jaffar and Rafeeq, Mohammed and Hrairi, Meftah (2019) Application of machine learning with impedance based techniques for structural health monitoring of civil infrastructure. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1139-1148. ISSN 2278-3075

Ahmed, muhammed Zaharadeen and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Alkali, Abdulqadir Hamidu and Mohamad, Sarah Yasmin and Morshidi, Malik Arman (2019) Throughput analysis for the mobility of a consumer and an anchorless producer in NDN. Journal of Advanced Research in Dynamical and Control Systems, 11 (1). pp. 189-196. ISSN 1943-023X

Ahmed Mounis, Shawgi Younis and Zainul Azlan, Norsinnira and Sado, Fatai (2019) Assist-as-needed control strategy for upper-limb rehabilitation based on subject’s functional ability. Measurement and Control (United Kingdom), 52 (9-10). pp. 1354-1361. ISSN 0020-2940

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Control of CD nozzle flow using microjets at Mach 2.1. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 631-635. ISSN 2278-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Effects of micro jets on the flow field of the duct with sudden expansion. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 636-640. E-ISSN 2277-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Numerical simulations of a CD nozzle and the influence of the duct length. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 622-630. ISSN 2278-3075

Akter, Sharmin and Islam, Thouhedul and Olanrewaju, Rashidah Funke and Binyamin, Ajayi Adeniyi (2019) A cloud-based bus tracking system based on internet-of-things technology. In: 2019 7th International Conference on Mechatronics Engineering (ICOM), 30-31 Oct 2019, Putra Jaya.

Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2019) Numerical analysis of aluminum foam sandwich subjected to compression loading. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 138-142. E-ISSN 2277-3878

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Yeakub Ali, Mohammad (2019) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 134-137. E-ISSN 2277-3878

Al-Bat’hi, Souad A. M. and Ahmed, Nafees (2019) Fabrication and characterization of CNT/ZnO thin film junction for photovoltaic application. In: 7th International Conference on Nano and Materials Science, ICNMS 2019, 4- 7 January 2019, San Francisco; United States.

Al-Sharief, Y.M. and Habaebi, Mohamed Hadi (2019) Follow me travel bag. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (8S). pp. 59-64. ISSN 2278-3075

Al-khulaidi, Rami Ali and Abu Bakr, Nuril Hana and Fauzi, Norfatehah Mohammad and Akmeliawati, Rini (2019) SignBot, sign-language performing robot, based on sequential motion of servo motor arrays. In: 5th International Conference on Robot Intelligence Technology and Applications (RiTA 2017), 13th-15th December 2017, Daejon, South Korea.

AlDahoul, Nouar and Htike@Muhammad Yusof, Zaw Zaw (2019) Utilizing hierarchical extreme learning machine based reinforcement learning for object sorting. International Journal of Advanced and Applied Sciences, 6 (1). pp. 106-113. ISSN 2313-626X E-ISSN 2313-3724

AlDahoul, Nouar and Mohd Suhaimi, Nur Farahana (2019) Benchmarking different deep regression models for predicting image rotation angle and robot’s end effector’s position. In: 7th International Conference on Mechatronics Engineering, ICOM 2019, 30 - 31 Oct 2019, Putrajaya.

Alara, Oluwaseun Ruth and Nour, Abdurahman Hamid and Ukaegbu, Chinonso Ishmael and Kabbashi, Nassereldeen Ahmed (2019) Extraction and characterization of bioactive compounds in Vernonia amygdalina leaf ethanolic extract comparing Soxhlet and microwave-assisted extraction techniques. Journal of Taibah University for Science, 13 (1). pp. 414-422. ISSN 1658-3655

Alazemi, Mohammad KhTh E and Mohiuddin, A. K. M. (2019) Conflicts and delays in mega construction projects – Kuwait International Airport Cargo City. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 927-939. ISSN 2249 - 8958

Alazemi, Mohammad KhTh E and Mohiuddin, A. K. M. and Al-Juboori, Salloom A. (2019) Conflict management of construction projects – a case study Kuwait International Airport Cargo City. International Journal of Mechanical Engineering (IJME), 8 (3). pp. 45-54. ISSN 2319-2240 E-ISSN 2319-2259

Alfaqawi, Mohammed and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul and Siddiqi, Mohammad Umar (2019) Energy harvesting network with wireless distributed computing. IEEE Systems Journal, early access. pp. 1-12. ISSN 1932-8184 E-ISSN 1937-9234

Alghifari, Muhammad Fahreza and Gunawan, Teddy Surya and Wan Nordin, Mimi Aminah and Ahmad Qadri, Syed Asif and Kartiwi, Mira and Janin, Zuriati (2019) On the use of voice activity detection in speech emotion recognition. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1324-1332. ISSN 2302-9285 E-ISSN 2302-9285

Alghifari, Muhammad Fahreza and Gunawan, Teddy Surya and Wan Nordin, Mimi Aminah and Kartiwi, Mira and Borhan, Lihanna (2019) On the optimum speech segment length for depression detection. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

Ali, Fathilah (2019) Becoming a zero single use plastic nation. Star Online.

Ali, Khamis and Abdul Malek, Norun and Jusoh, Ahmad Zamani and Mohamad, Sarah Yasmin and Zainal Abidin, Zuhairiah and Asnawi, Ani Liza (2019) Design and optimize microstrip patch antenna array using the active element pattern technique. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 994-1003. ISSN 2089-3191 E-ISSN 2302-9285

Ali, Maisarah and Jahn Kassim, Puteri Shireen and Samsudin, Abu Dzar and Raja Abdul Kadir, Tengku Anis Qarihah (2019) The three layerings of Malay Aristocratic ornamentations: survival of semantic categories amidst stylistic changes. In: The 6th Putrajaya International Built Environment, Technology and Engineering Conference (PIBEC 6) 2019, 15th-16th April 2019, Bangi, Selangor. (Unpublished)

Ali, Maisarah and Jahn Kassim, Puteri Shireen and Samsudin, Abu Dzar and Raja Abdul Kadir, Tengku Anis Qarihah (2019) The three layerings of Malay aristocratic ornamentations: survival of semantic categories amidst stylistic changes. JOURNAL OF BUILT ENVIRONMENT, TECHNOLOGY AND ENGINEERING, 6. pp. 1-12. ISSN 0128-1003

Ali, Said and Islam, Mazharul and Mohiuddin, A. K. M. and Idres, Moumen (2019) Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 153-157. ISSN 2277-3878 E-ISSN 2249-8958

Almakki, Asma and Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed (2019) Production of citric acid from sugarcane molasses by Aspergillus niger using submerged fermentation. Biological and Natural Resources Engineering Journal, 2 (1). pp. 47-55. E-ISSN 2637-0719

Amin, Ifte Khairul and Nasir Uddin, Mohammad and Hannan, Mahammad Abdul and Alam, A. H. M. Zahirul (2019) Adaptive neuro-fuzzy controller for grid voltage dip compensations of grid connected DFIG-WECS. In: 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 12th-15th May 2019, San Diego, CA, USA, USA.

Amin, Mohammad Mehdi and Taheri, Ensiyeh and Bina, Bijan and van Ginkel, Steven W. and Ghasemian, Mohammad and Mohamad Puad, Noor Illi and Fatehizadeh, Ali (2019) Electron flow of biological H2 production by sludge under simple thermal treatment: Kinetic study. Journal of Environmental Management, 250. pp. 1-7. ISSN 0301-4797

Amosa, Mutiu Kolade and Jami, Mohammed Saedi and Al-Khatib, Ma An Fahmi Rashid and Majozi, Thokozani and Adeniyi, Adewale George and Aderibigbe, Fatai Alade and Abdulkareem, Sulyman Age (2019) Modelling of pore-blocking behaviors of low-pressure membranes during constant-pressure filtration of an agro-industrial wastewater. In: Water management: social and technological perspectives. Green chemistry and chemical engineering . CRC Press Taylor & Francis Group, Parkway NW, pp. 138-164. ISBN 978-1-1380-6724-0

Andan, Amelda Dianne and Lee, Duck-Joo (2019) Discrete tonal noise of NACA0015 airfoil at low reynolds number. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 129-145. ISSN 2289-7879

Anuar, Hazleen and Ali, Fathilah and Buys, Yose Fachmi and Mohd Apandi, Siti Nur E'zzati and Abd. Rashid, Siti Munirah Salimah and Adli, Sarah Amalina (2019) Sustainable nanocomposites in food packaging. In: Sustainable polymer composites and nanocomposites. Springer Nature Switzerland, Switerland, pp. 413-436. ISBN 978-3-030-05398-7

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hilmy, Irfan (2019) Hardware improvement of FDM 3D printer: issue of bed leveling failures. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (4). pp. 603-614. E-ISSN 2278-3075

Arifutzzaman, A. and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Stability investigation of water based exfoliated graphene nanofluids. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Arifutzzaman, Abul and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Experimental investigation of concentration yields of liquid phase exfoliated graphene in organic solvent media. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Arslan, Ahmed and Hassan, Masjuki and M. M., Quazi and Abul Kalam, Mohammad and Varman, Mahendora and Chattha, Jamshaid Anwar and Jamshaid, Muhammad and Ashrafur Rahman, S. M. and Imran, Muhammad and Zakaria, Muhammad Zulfattah and Anwar, Muhammad Tuoqeer and Gohar, Ghulam Abbas and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-9. E-ISSN 2053-1591 (In Press)

Asadullah, Mohammed and Khan, Sher Afghan and Soudagar, Manzoore Elahi M and T. R., Vaishak (2019) A comparison of the effect of single and multiple cavities on base flows. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018, 22nd-23rd Nov. 2018, Bangkok, Thailand.

Asnawi, Ani Liza and Ahmad, Amalina and Mohamed Azmin, Nor Fadhillah and Ismail, Kamsiah and Jusoh, Ahmad Zamani and Ibrahim, Siti Noorjannah and Mohd Ramli, Huda Adibah (2019) The needs of collaborative tool for practicing pair programming in educational setting. International Journal of Interactive Mobile Technologies (iJIM), 13 (07). pp. 17-30. ISSN 18657923 E-ISSN 1865-7923

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 241-245. ISSN 2277-3878

Azam, Huda and Mohamad Hanif, Noor Hazrin Hany and Md Ralib, Aliza Aini (2019) Magnetically plucked piezoelectric energy harvester via hybrid kinetic motion. IIUM Engineering Journal, 20 (1). pp. 245-257. ISSN 1511-788X

Azam, Huda and Mohamad Hanif, Noor Hazrin Hany and Md Ralib @ Md Raghib, Aliza 'Aini (2019) Magnetically induced piezoelectric energy harvester via hybrid kinetic motion. IIUM Engineering Journal, 20 (1). pp. 245-257. ISSN 1511-788X E-ISSN 2289-7860

Azam, S. M. Kayser and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Hossain, A. K. M. Zakir (2019) Plans for planar: phase-noise reduction techniques in voltage-controlled oscillators. IEEE Microwave Magazine, 20 (11). pp. 92-108. ISSN 1527-3342 E-ISSN 1557-9581

Azam, S. M. Kayser and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Hossain, A. K. M. Zakir and Islam, Md. Shazzadul (2019) A miniaturized hairpin resonator for the high selectivity of WLAN bandwidth. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 916-922. ISSN 2089-3191 E-ISSN 2302-9285

Azami, Muhammad Hanafi (2019) Investigation of three-shaft high-bypass-ratio engine performance and emission prediction using alternative fuels. Project Report. UNSPECIFIED. (Unpublished)

Azami, Muhammad Hanafi and Faheem, Mohammed and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Experimental research of wall pressure distribution and effect of micro jet at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3). pp. 1000-1003. E-ISSN 2277-3878

Azami, Muhammad Hanafi and Mustafa, Muhamad Zaki and Savill, Mark and Li, Yi-Guang (2019) Modelling the performance of aero-gas turbine engine using algae-based biofuel with emission prediction. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Azami, Muhammad Hanafi and Noorazman, Zahid and Savill, Mark and Li, Yi-Guang and Hilmi, Mohd Radzi (2019) Modelling the performance and emission prediction of RB211 aero-gas turbine engine fuelled by Jatropha-based biofuel. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Azami, Muhammad Hanafi and Savill, Mark (2019) Performance and emission trade-off assessment for aero-gas turbine engine. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 270-276. ISSN 2277-3878

Azman, Amelia Wong and Fajingbesi, Fawwaz Eniola and Ahmad, Zuraida and Mohd Mustafah, Yasir and Olanrewaju, Rashidah Funke and Hamzaid, Nur Azah (2019) Electrical stimulation in combating pressure ulcer for immobilize subjects: a conceptual framework. In: International Conference on Biomedical Engineering, 26 - 27 Aug 2019, Penang Island.

Azmi, Muhammad Amirul Amin and Nik Hashim, Nik Nur Wahidah and Md. Yusof, Hazlina (2019) Augmentative and alternative communication method based on tongue clicking for mute disabilities. IIUM Engineering Journal, 20 (1). pp. 119-128. ISSN 1511-788X E-ISSN 2289-7860

B

Badawi, Ahmed S.A. and Hasbullah, Nurul Fadzlin and Yusoff, Siti Hajar and Abdalla Hashim, Aisha Hassan and Elamassie, Mohammed (2019) Practical electrical energy production to solve the shortage in electricity in Palestine and pay back period. International Journal of Electrical and Computer Engineering (IJECE), 9 (6). pp. 4610-4616. ISSN 2088-8708

Badawi, Ahmed S.A. and Hasbullaha, Nurul Fadzlin and Yusoff, Siti Hajar and Hassan Abdalla Hashim, Aisha (2019) Energy and power estimation for three different locations in Palestine. Indonesian Journal of Electrical Engineering and Computer Science, 14 (3). pp. 1049-1056. ISSN 2502-4752

Banu, Asfana and Ali, Mohammad Yeakub and Abd Rahman, Md Nizam and Konneh, Mohamed (2019) Investigation of process parameters for stable micro dry wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, 103 (1-4). pp. 723-741. ISSN 0268-3768 E-ISSN 1433-3015 (In Press)

Barre, Mohamed Soleiman and Ali, Fathilah and Mirghani, Mohamed Elwathig Saeed and Nordin, Noor Faizul Hadri (2019) Microencapsulated frankincense essential oil: a potential remedy and prevention of mouth diseases. Malaysian Journal of Medicine and Health Science, 15 (Supplement 8). p. 22. ISSN 1675-8544

Basalooml, Abdullah Ahmed S. and Habaebi, Mohamed Hadi and Khan, Sheroz and Shaikh, Faraz Ahmed (2019) Increasing RPL-based LLN lifespan using harvested solar energy. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

Bhuiyan, Sharif Shah Newaj and Khalifa, Othman Omran (2019) Efficient 3D stereo vision stabilization for multi-camera viewpoints. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 882-889. ISSN 2089-3191 E-ISSN 2302-9285

Bouh, Ibrahim Gamiye and Alam, Md. Zahangir and Kabbashi, Nassereldeen Ahmed and Mohamed Ali, Amina (2019) Enhancement of biogas production from sewage sludge by biofilm pretreatment method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2). pp. 141-147. ISSN 2289-7879

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2019) From green remediation to polymer hybrid fabrication with improved optical band gaps. International Journal of Molecular Sciences, 20 (16). pp. 1-23. ISSN 1661-6596 E-ISSN 1422-0067

Budalal, Asma. Ali H. and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Rahman, Tharek Abd. (2019) The effects of rain fade on millimetre wave channel in tropical climate. Bulletin of Eletrial engineering and Informatics, 8 (2). pp. 653-664. ISSN 2089-3191 E-ISSN 2302-9285

Butt, Mohammad Mursaleen and Ahmad, Sheikh Nazir and Al-Robian, Abdulrehman A and Khan, Sher Afghan (2019) Finite element modeling and analysis of a debonded smart beam in actuation. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 258-263. ISSN 2277-3878

C

Che Ghani, Nor Artisham and Mt Aznam, Suazlan (2019) A numerical solution for heat transfer past a stretching sheet with ohmic dissipation and suction or injection problem using Haar wavelet quasilinearization method. In: 5th International Conference on Mathematical Applications in Engineering (ICMAE’19), 30th-31st October 2019, Putrajaya. (Unpublished)

Che Mohd Noh, Mohd Ihsan and Mohamed, Mohd Ambri and Ismail, Ahmad Ghadafi and Ani, Mohd Hanafi and Majlis, Burhanuddin Yeop (2019) Improvement of gas barrier properties of Polyethylene Terephtalate (PET) by Graphene Nanoplatelets (GNP). In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz and Azam, Amelia Wong (2019) Frequency dependency analysis for differential capacitive sensor. Bulletin of Electrial Engineering and Informatics, 8 (3). pp. 789-797. ISSN 2089-3191 E-ISSN 2302-9285

Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz and Azman, Amelia Wong (2019) Parasitic consideration for differential capacitive sensor. Bulletin of Electrial Engineering and Informatics, 8 (3). pp. 798-807. ISSN 2089-3191 E-ISSN 2302-9285

Chebil, Jalel and Ghaeb, Jasim and Fekih, Mohamed Anwer and Habaebi, Mohamed Hadi (2019) Assessment of road traffic noise: a case study in Monastir City. Jordan Journal of Mechanical and Industrial Engineering, 13 (3). pp. 149-154. ISSN 1995-6665

Chibel, Jalel and Attia, Oussama and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2019) New tag estimator for the dynamic framed slotted Aloha anti-collision algorithm in RFID systems. International Journal of Computer Science, Communication & Information Technology (CSCIT), 8 (1). pp. 1-5. ISSN 1737-930X

D

Daddiouaissa, Djabir and Amid, Azura and Kabbashi, Nassereldeen Ahmed and Ahmad Fuad, Fazia Adyani and Elnour, Ahmed and Epandy, Mohamad A.K.M S. (2019) Antiproliferative activity of ionic liquid-graviola fruit extract against human breast cancer (MCF-7) cell lines using flow cytometry techniques. Journal of Ethnopharmacology, 236. pp. 466-473. ISSN 0378-8741

Deb, Nibedita and Alam, Md. Zahangir and Rashid Al-khatib, Maan Fahmi and Elgharbawy, Amal A.M. (2019) Development of acid‐base‐enzyme pretreatment and hydrolysis of palm oil mill effluent for bioethanol production. In: Liquid Biofuel Production. Scrivener Publishing, Beverly, MA, pp. 197-217. ISBN 978-1-119-45987-3

Delvi, Hamza Afser and Faheem, Mohammed and Khan, Sher Afghan and Kumar M., Kiran and Kareem Ullah, Mohammad (2019) Effect of ethanol-gasoline blends on performance, combustion and emission characteristics of spark ignition engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 209-220. ISSN 2289-7879

Dewanti, I Dewa Ayu Ratna and Lestari, Pujiana Endah and Budirahardjo, Roedy and Setyorini, Dyah and Yani, Ristya Widi Endah and Wibisono, Sunlip and Mel, Maizirwan (2019) The effect of steeping robusta coffee beans on monocytes: Expression of IL-1β and TNF-α against Streptococcus mutans. Coffee Science, 14 (4). pp. 477-483. ISSN 1809-6875

Ding, Ziyun and Azmi, Nur Liyana and Bull, Anthony M.J. (2019) Validation and use of a musculoskeletal gait model to study the role of functional electrical stimulation. IEEE Transactions on Biomedical Engineering, 66 (3). pp. 892-897. ISSN 0018-9294 E-ISSN 1558-2531

Dzulkifli, Sumayyah and Hashim, Wahidah and Ismail, Ahmad Fadzil and Dohler, Mischa (2019) User-centric learning for multiple access selections. International Journal of Engineering and Advanced Technology, 9 (1). pp. 2338-2344. ISSN 2249-8958

E

Elgharbawy, Amal A.M. and Alam, Md Zahangir and Moniruzzaman, Muhammad and Kabbashi, Nassereldeen Ahmed and Jamal, Parveen (2019) High yield of second-generation ethanol in an ionic liquid-cellulase integrated system for single-step processing of empty fruit bunch. Biofuels, 2019. pp. 1-13.

Elgharbawy, Amal A.M. and Hayyan, Adeeb and Hayyan, Maan and Mirghani, Mohamed Elwathig Saeed and Mohd. Salleh, Hamzah and Rashid, Shahidah Nusailah and Ngoh, Gek Cheng and Liew, Shan Qin and Mohd Nor, Mohd Roslan and Zulkifli, Mohd Zamani and Alias, Yatimah (2019) Natural deep eutectic solvent-assisted pectin extraction from pomelo peel using sonoreactor: experimental optimization approach. Processes, 7 (7). pp. 1-19. E-ISSN 2227-9717

Elgharbawy, Amal A.M. and Moniruzzaman, Muhammad and Mohd. Salleh, Hamzah and Alam, Md. Zahangir (2019) Ionic liquids as a green solvent for lipase-catalyzed reactions. In: Industrial applications of green solvents. Materials Research Forum LLC, Millersville, PA, pp. 21-60. ISBN 978-1-64490-023-9

Elnour, Ahmed Adam Hassan M. and Mirghani, Mohamed Elwathig Saeed and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Musa, Khalid Hamid (2019) Active fractions of methanol crude obtained from Acacia seyal gum: Antioxidant capacity using FTIR analysis. Borneo Journal of Pharmacy, 2 (2). pp. 94-107. E-ISSN 2621-4814

Elsheikh, Elfatih A. A. and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Eltahir, E.I and Suliman, F.M. (2019) Development of an emperical model for dust storm attenuation prediction. In: 2019 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE), 21st ~ 23rd September 2019, Mashreq University, North Khartoum, Sudan. (Unpublished)

Embong, Abd Halim and Akbar, Muhammad Ali and Rashid, Muhammad Mahbubur (2019) Design and development of Multipurpose Educational and Research Platform (MERP) for learning control & IOT technologies. Journal of Engineering Science and Technology (JESTEC), 14 (2). pp. 747-762. ISSN 1823-4690

F

Faheem, Mohammad and Kareem Ullah, Mohammad and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Experiment on of nozzle flow with sudden expansion at Mach 1.1. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1769-1775. E-ISSN 2277-3878

Farag, Mohannad and Zainul Azlan, Norsinnira and Alsibai, Mohammed Hayyan and Abd Ghafar, Abdul Nasir (2019) Slippage detection for grasping force control of robotic hand using force sensing resistors. In: 5th International Conference on Computer and Technology Applications, ICCTA 2019, 16th-17th April 2019, Istanbul, Turkey.

Fauzi, Fatin Bazilah and Ismail, Edhuan and Osman, Muhammad Naqib and Rosli, Muhammad Suffian and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi (2019) Influence of mixed convection in atmospheric pressure chemical vapor deposition of graphene growth. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

G

G M, Fharukh and Khan, Sher Afghan (2019) Control of nozzle flow using microjets at supersonic Mach Regime. International Journal of Engineering, 32 (7). pp. 991-998. ISSN 1025-2495 E-ISSN 1735-9244

G. M, Fharukh Ahmed and Khan, Sher Afghan (2019) Role of active control in increasing base pressure at Sonic Mach Number. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 966-970. E-ISSN 2277-3878

G. M., Fharukh Ahmed and Khan, Sher Afghan (2019) Effect of area ratio on base pressure and control effectiveness. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 953-958. E-ISSN 2277-3878

Ganat, Tarek A. and Hrairi, Meftah (2019) Effect of flow patterns on two-phase flow rate in vertical pipes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 150-160. ISSN 2289-7879

Ganat, Tarek A. and Hrairi, Meftah (2019) Gas–liquid two-phase upward flow through a vertical pipe. In: Selected Problems in Fluid Flow and Heat Transfer. MDPI, Basel, Switzerland, pp. 198-220. ISBN 978-3-03921-427-3

Ganat, Tarek A. and Hrairi, Meftah and Belladonna, Maulianda and Eghbal, Motaei (2019) Analytical model for predicting frictional pressure drop in upward vertical two-phase flowing wells. Heat and Mass Transfer, 55 (8). pp. 2137-2151. ISSN 0947-7411 E-ISSN 1432-1181

Ganat, Tarek A. and Hrairi, Meftah and Regassa, Shiferaw (2019) Experimental investigation of gas–oil–water phase flow in vertical pipes: influence of gas injection on the total pressure gradient. Journal of Petroleum Exploration and Production Technology, 9 (4). pp. 3071-3078. ISSN 2190-0558 E-ISSN 2190-0566

Ganat, Tarek A. and Ridha, Syahrir and Hrairi, Meftah and Arisa, Juhairi and Gholami, Raoof (2019) Experimental investigation of high‑viscosity oil–water flow in vertical pipes: flow patterns and pressure gradient. Journal of Petroleum Exploration and Production Technology, 9. pp. 2911-2918. ISSN 2190-0558 E-ISSN 2190-0566

Ghazali, Aimi Shazwani and Ham, Jaap and Barakova, Emilia I. and Markopoulos, Panos P. (2019) Assessing the effect of persuasive robots interactive social cues on users’ psychological reactance, liking, trusting beliefs and compliance. Advanced Robotics, 33 (7-8). pp. 325-337. ISSN 0169-1864 E-ISSN 1568-5535

Ghazali, Aimi Shazwani and Ham, Jaap and Markopoulos, Panos P. and Barakova, Emilia (2019) Investigating the effect of social cues on social agency judgement. In: 14th Annual ACM/IEEE International Conference on Human-Robot Interaction, HRI 2019, 11-14 March 2019, Daegu, Korea (South), Korea (South).

Gul, Safia and Hashim, Yumi Zuhanis Has-Yun and Mohamad Puad, Noor Illi and Shamsudin, Nurhusna (2019) Fabrication and characterization of plant mediated green zinc nanoparticles for antileishmanial properties. International Journal of Recent Technology and Engineering(TM), 8 (2). pp. 5743-5749. E-ISSN 2277-3878

Gunawan, Teddy Surya and Anuar, Muhamad Hadzir and Kartiwi, Mira and Janin, Zuriati (2019) Design of power factor meter using internet of things for power factor improvement, remote monitoring and data logging. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). pp. 700-709. ISSN 2502-4752 E-ISSN 2502-4760

Gunawan, Teddy Surya and Ismail, Md Yusof and Ihsan, Sany Izan (2019) On the selection of culminating courses for outcome-based education evaluation at engineering education. In: International Conference on E-Learning 2019, 21st-22nd August 2019, Kuching, Sarawak.

Gunawan, Teddy Surya and Kartiwi, Mira and Abdul Malik, Noreha and Ismail, Nanang (2019) Food intake calorie prediction using generalized regression neural network. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Gunawan, Teddy Surya and Sabar, Mohamad Firdaus and Nasir, Haidawati and Kartiwi, Mira and Motakabber, S.M.A. (2019) Development of smart chicken poultry farm using RTOS on Arduino. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27-29 Aug 2019, Kuala Lumpur, Malaysia.

H

Habaebi, Mohamed Hadi and Che Mustapha, Nurul Arfah and Janat, Mohanad and Islam, Md. Rafiqul (2019) A 28 GHz MIMO antenna array design for 5G applications. Journal of Advanced Research in Dynamical and Control Systems, 11 (1). pp. 197-203. ISSN 1943-023X

Hablee, Sufiamie and Samsudin, Nurhusna and Sopyan, Lis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md. Mujibur and Ahmad Raus, Raha (2019) Calcium phosphate /poly (ethylene glycol) bone cement: cell culture performance. International Journal of Recent Technology and Engineering, 7 (6). pp. 82-86. ISSN 2277-3878

Hameed, Shihab A. and Nirabi, Ali and Habaebi, Mohamed Hadi and Haddad, Alaa (2019) Application of mobile cloud computing in emergency health care. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 1088-1095. ISSN 2089-3191

Hameed, Shihab Ahmed and Haddad, Alaa and Habaebi, Mohamed Hadi and Nirabi, Ali (2019) Dermatological diagnosis by mobile application. Bulletin of Electrical Engineering and Informatics (BEEI), 8 (3). pp. 847-854. ISSN 2089-3191 E-ISSN 2302-9285

Hamida, Belal Ahmed and Eltaif, Tawfig and Mohd Noh, Farhan Daniel and Khan, Sheroz (2019) Investigation of output power in ring CW fiber laser using graphene saturable absorber. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 1022-1027. ISSN 2302-9285

Hamidon, Nor Ezzati and Abdul Molok, Salma and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani and Rejab, Nik Akmar and Ahmad, Zainal Arifin and Mohd Ali, Afifah (2019) Hardness and fracture toughness analysis of ZTA–SWCNT ceramic cutting inserts. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (IXCRI 2018), 18th-19th August 2018, Kota Bharu, Kelantan.

Hamizi, Ilya Bashiera and Khan, Sher Afghan (2019) Aerodynamics investigation of delta wing at low Reynold’s number. CFD letters, 11 (2). pp. 32-41. ISSN 2180-1363

Hamza, Mohammad Ameer and Jameel, Ahmad Tariq and Asrar, Waqar (2019) A comparative study of two different numerical schemes for the simulation of nonlinear dynamics of heated falling thin films. International Journal of Recent Technology and Engineering, 7 (6). pp. 100-105. ISSN 2277-3878

Hamzah, Muhammad Hafizuddin and Mohd Taib, Aizat and Sharil, Suraya and Ramli, Ahmad Bukhari and Abang Hasbollah, Dayang Zulaika (2019) The stability of diaphragm wall for deep excavation. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.6 (Special issue)). pp. 303-309. ISSN 2278-3091

Harun, Ahmad Nizar and Ahmad, Robiah and Mohamed, Norliza and Abdul Rahim, Abd Rahman and Khan, Sheroz (2019) The effect of different light treatments on nutrient concentration and leaf exchange in Brassica Chinensis. In: 5th IEEE International Conference on Smart Instrumentation, Measurement and Application (ICSIMA 2018), 28th-30th Nov. 2018, Songkhla, Thailand.

Hasan, Md Rashidul and Nuruzzaman, Md and Al-Mamun, Abdullah (2019) Contribution of rainwater to the irrigation requirement for paddy cultivation at Tanore Upazila in Rajshahi, Bangladesh. Air, Soil and Water Research, 12. pp. 1-8. ISSN 1178-6221

Hasan, Mohammad Kamrul and Ahmed, Musse Mohamud and Janin, Zuriati and Khan, Sheroz and Hassan Abdalla Hashim, Aisha and Islam, Shayla (2019) Delay analysis of two-way synchronization scheme for phasor measurement unit based digital smart grid applications. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Hasan, Mohammad Kamrul and Ismail, Ahmad Fadzil and Islam, Shayla and Hashim, Wahidah and Ahmed, Musse Mohamud and Memon, Imran (2019) A novel HGBBDSA-CTI approach for subcarrier allocation in heterogeneous network. Telecommunication Systems, 70 (2). pp. 245-262. ISSN 1018-4864 E-ISSN 1572-9451

Hasan, Mohammad Kamrul and Yusoff, Siti Hajar and Ahmed, Musse Mohamud and Hassan Abdalla Hashim, Aisha and Ismail, Ahmad Fadzil and Islam, Shayla (2019) Phase offset analysis of asymmetric communications infrastructure in smart grid. Elektronika ir Elektrotechnika, 25 (2). pp. 67-71. ISSN 1392-1215

Hasbullah, Faried and Faris, Waleed Fekry and Darsivan, Fadly Jashi and Abdelrahman, Mohammad (2019) Ride comfort performance of a non-linear full-car using active suspension system with active disturbance rejection control and input decoupling transformation. International Journal of Heavy Vehicle Systems, 26 (2). pp. 188-224. ISSN 1744-232X E-ISSN 1741-5152 (In Press)

Hasbullah, Nurul Fadzlin and Mohd Khairi, Mohamad Azim and Abdullah, Yusof (2019) Response of electron-irradiated silicon carbide Schottky power diodes at elevated temperature. International Journal of Power Electronics. pp. 1-13. ISSN 1756-638X E-ISSN 1756-6398 (In Press)

Hasni, Mohd Haffizi and Sulaiman, Sarina and Jimat, Dzun Noraini and Amid, Azura (2019) Review: a comparison of conditions for the extraction of vegetable and essential oils via microwave-assisted extraction. In: 26th Regional Symposium on Chemical Engineering (RSCE 2019@ Kuala Lumpur), 29 Oct - 1 Nov 2019, Kuala Lumpur.

Hedzir, Anati Syahirah and Muridan, Norasmahan and Yusof, Abdullah and Hasbullah, Nurul Fadzlin (2019) Effect of electron irradiation on the electrical and optical characteristics of gallium-nitride light emitting diodes. Ukrainian Journal of Physical Optics, 20 (3). pp. 124-132. ISSN 1609-1833 E-ISSN 1816-2002

Hoque, Mohammad Mominul and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Alam, A. H. M. Zahirul and Akter, Mahfuza (2019) An Arduino microcontroller based RLC meter. In: 2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 21st - 23rd August 2019, Kuala Lumpur, Malaysia.

Hosen, Md Sabuj and Mansor, Mariatul Fadzillah and Mohammad, Zahangir Alam (2019) Anaerobic co-digestion of sewage sludge and food waste as a promising alternative for waste management and energy production. Biological and Natural Resources Engineering Journal, 2 (1). pp. 26-46. E-ISSN 2637-0719

Hossain, A. K. M. Zakir and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Habaebi, Mohamed Hadi (2019) A planar parallel slotted circular disk passive UWB-RFID tag. ARPN Journal of Engineering and Applied Sciences, 14 (6). pp. 1149-1154. ISSN 1819-6608

Hrairi, Meftah and Daoud, Jamal Ibrahim and Zakaria, Faiz (2019) Optimization of incremental sheet metal forming process using grey relational analysis. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 246-252. ISSN 2277-3878

I

Ibrahim, Siti Noorjannah and Hasan Basri, A. H. and Asnawi, Ani Liza (2019) Development of web-based surveillance system for Internet of Things (IoT) application. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 1108-1116. ISSN 2089-3191 E-ISSN 2302-9285

Ibren, Mohamed and Sulaeman, Erwin and Legowo, Ari and Abdullah, Nur Azam (2019) Roll control reversal of variable swept wing in supersonic flow. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 288-291. ISSN 2249-8958 E-ISSN 2277-3878

Idres, Moumen and Okasha, Mohamed Elsayed Aly Abd Elaziz (2019) Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 44-47. ISSN 2277-3837

Idres, Moumen and Okasha, Mohamed Elsayed Aly Abd Elaziz (2019) Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Idris, Nur Farahi and Mohd Yahya, Nor Akmar and Yaacob, Mohd Hanif and Idris, Auni Hamimi and Wadi, Sulaiman and Saidin, Norazlina (2019) Optical fiber coated Zinc Oxide (ZnO) nanorods decorated with Palladium (Pd) for hydrogen sensing. Optical Materials, 96. pp. 1-2. ISSN 0925-3467 E-ISSN 1873-1252

Idris Oseni, Munirat and Jami, Mohammed Saedi and Monsur, Hammed Ademola (2019) Optimization process of moringa oleifera seed extract using artificial neural network (ANN). Malaysian Journal of Fundamental and Applied Sciences, 15 (2 (March-April)). pp. 254-259. ISSN 2289-5981 E-ISSN 2289-599X

Ifedapo Abdullahi, Salami and Habaebi, Mohamed Hadi and Abdul Malik, Noreha (2019) Design, simulation and practical experimentation of miniaturized turbine flow sensor for flow meter assessment. Bulletin of Electrical Engineering and Informatics (BEEI), 8 (3). pp. 777-788. ISSN 2089-3191 E-ISSN 2302-9285

Ihsan, Sany Izan and Mohiuddin, A. K. M. and Syed Abu Bakar, Syed Noh and Rosili, Sarah Shamila (2019) Experimental study on low temperature power generator. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Illias, Suhaimi and Hussain, Suhaila and Rosman, N A and Abdullah, Nadiah Syafiqah and Shaiful, Mohamad Shaiful Ashrul and Omar, Mohd Nazri and Ismail, K A and Ani, Mohd Hanafi (2019) Receding height of water droplet in the film boiling regime. In: 6th International Conference on Applications and Design in Mechanical Engineering, 26 - 27 Aug 2019, Penang Island.

Inche Ibrahim, Mohd Lukman and Hassan, Husna Amira (2019) Influence of active layer thickness on the performance of organic photovoltaics with light trapping. IEEE Transactions on Electron Devices, 66 (7). pp. 3124-3128. ISSN 0018-9383 E-ISSN 1557-9646

Isa, Wan Tarmizi and Saharin, Sanisah and Wan Salim, Wan Wardatul Amani (2019) Battery characterization of hybrid car. International Journal of Recent Technology and Engineering, 7 (6). pp. 143-146. ISSN 2277-3878

Ishak, Nor Izzati and Md Yusof, Hazlina and Sidek, Shahrul Na'im and Rusli, Nazreen (2019) Robot selection in robotic intervention for ASD children. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences )IECBES 2018), 3rd-6th December 2018, Kuching, Sarawak.

Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Sulaeman, Erwin and Fatai, Sado and Legowo, Ari (2019) Performance evaluation of linear quadratic regulator and linear quadratic Gaussian controllers on quadrotor platform. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 191-195. ISSN 2277-3878 E-ISSN 2249-8958

Islam, Md. Shazzadul and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Hossain, A. K. M. Zakir and Azam, S. M. Kayser (2019) Microstrip patch antenna with defected ground structure for biomedical application. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 588-597. ISSN 2089-3191 E-ISSN 2302-9285

Islam, Md. Shazzadul and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Hossain, A. K. M. Zakir and Azam, S. M. Kayser (2019) A wideband millimeter-wave printable antenna on flexible substrate for breast cancer imaging. In: 2019 7th International Conference on Mechatronics Engineering (ICOM) 2019, 30th–31st October 2019, Putrajaya. (Unpublished)

Islam, Saiful and Saleh, Tanveer and Latief, Marsad and Mohd Razib, Mohd Asyraf and Abdul Muthalif, Asan Gani (2019) Prototype of single degree of freedom optical resolver. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur.

Islam, Saiful and Saleh, Tanveer and Mohd Razib, Mohd Asyraf and Mohamed Ali, Mohamed Sutan (2019) An ex-situ method to convert vertically aligned carbon nanotubes array to horizontally aligned carbon nanotubes mat. Materials Research Express, 6 (2). pp. 1-8. E-ISSN 2053-1591

Ismail, Edhuan and Fauzi, Fatin Bazilah and Mohamed, Mohd Ambri and Mohd Yasin, Mohd Fairus and Mohd Abid, Mohd Asyadi Azam and Yaacob, Iskandar Idris and Md Din, Muhamad Faiz and Ani, Mohd Hanafi (2019) Kinetic studies of few-layer graphene grown by flame deposition from the perspective of gas composition and temperature. RSC Advances, 9 (36). pp. 21000-21008. ISSN 2046-2069

Ismail, Muhammad Danial and Habaebi, Mohamed Hadi (2019) Empirical evaluation of LORA link performance for Smart City/Smart Campus environments. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (8S). pp. 50-58. ISSN 2278-3075

Ismail, Norfarah Nadia and Md Yusoff, Nur Izzi and Md. Husain, Nadiah and Mat, Jamaludin and Ali, Maisarah (2019) The application of CAP-SASW method in determination of sub-surface profile of flexible taxiway in the airport. In: 10th Malaysian Road Conference & Exhibition 2018, 29th-31st October 2018, Petaling Jaya, Selangor.

Ismail, Nur Alya Batrisya and Abd. Wahab, Mohd. Firdaus and Wan Salim, Wan Wardatul Amani (2019) Cyclic voltammetry and electrochemical impedance spectroscopy of partially reduced graphene oxide - PEDOT:PSS transducer for biochemical sensing. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences )IECBES 2018), 3rd-6th December 2018, Kuching, Sarawak.

Ismail, Nur Alya Batrisya and Arris, Farrah Aida and Tumian, Afidalina and Wan Salim, Wan Wardatul Amani (2019) Preliminary study on the effect of reduced graphene oxide, gold nanoparticles, and nafion® concentration on redox peak current for electrochemical biosensing. Journal of Engineering Science and Technology (JESTEC), 14 (1). pp. 48-58. ISSN 1823-4690

Ismail, Nur Alya Batrisya and Ramli, Nurul Izzati and Abd-Wahab, Firdaus and Wan Salim, Wan Wardatul Amani (2019) Cyclic voltammetric and electrical impedance spectroscopy studies of graphene- and conductive polymer–based enzyme electrodes. International Journal of Integrated Engineering, 11 (3). pp. 70-80. ISSN 2229-838X E-ISSN 2600-7916

Ismail, Salhana and Mohd Taib, Aizat and Abd. Rahman, Norinah and Abang Hasbollah, Dayang Zulaika and Ramli, Ahmad Bukhari (2019) Slope stability of landfill with waste degradation. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 393-398. ISSN 2278-3075,

Iwata, Masashi and Shimo, Takayuki and Tanaka, Takanori and Jami, Mohammed Saedi (2019) Constant pressure expression of power law non-Newtonian fluid/solid mixture. Journal of the Taiwan Institute of Chemical Engineers, 94. pp. 37-42. ISSN 1876-1070

Iwata, Masashi and Shimoizu, Kazuya and Iwasaki, Tomohiro and Jami, Mohammed Saedi (2019) Potential of electrokinetic response for the analysis of solid-liquid mixture during mechanical expression. In: 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019), 23rd – 27th September 2019, Sapporo, Japan. (Unpublished)

J

Jaafar, Abdul Hassan and Rahman, Mohammed Ataur (2019) Study on the intelligent control system of EMA-CVT. International Journal of Recent Technology and Engineering (IJRTE), 7 (65). pp. 48-53. ISSN 2277-3878

Jaleel, Nubila and Habaebi, Mohamed Hadi and Che Mustapha, Nurul Arfah and Islam, Md. Rafiqul (2019) IoT Light Weight (LWT) crypto functions. International Journal of Interactive Mobile Technologies (iJIM), 13 (4). pp. 117-128. E-ISSN 1865-7923

Jamal, Nur Firda Ayu and Sidek, Khairul Azami and Jusoh, Ahmad Zamani (2019) Portable health monitoring kit using photolethysmogram signal. Indonesian Journal of Electrical Engineering and Computer Science, 15 (2). pp. 638-649. ISSN 2502-4752 E-ISSN 2502-4760

Jamali, Nur Syakina and Dzul Rashidi, Nur Farahana and Md Jahim, Jamaliah and O-Thong, Sompong and Jehlee, Aminee and Engliman, Nurul Sakinah (2019) Thermophilic biohydrogen production from palm oil mill effluent: Effect of immobilized cells on granular activated carbon in fluidized bed reactor. Food and Bioproduct Processing, 117. pp. 231-240. ISSN 0960-3085

Jameel, Ahmad Tariq and Maalim, Kauthar Yusuf and Yusof, Faridah (2019) Relative characterization of immobilized beta-glucosidase on calcium-alginate and acid functionalized-multiwalled carbon nanotubes peel. Jurnal Teknologi, 81 (3). pp. 1-10. ISSN 0127-9696

Jami, Mohammed Saedi and Ahmad, Mani Malam and Abayomi, Olalere Olusegun and Ngabura, Mohammed (2019) Elemental and chemical composition of Moringa oleifera husk extracts. Journal of Chemical Engineering and Industrial Biotechnology, 5 (October 2018 - March 2019). pp. 74-78. ISSN 2600-7347 E-ISSN 0126-8139

Jami, Mohammed Saedi and Alam, Md Zahangir and Mohd. Salleh, Hamzah and Jamal, Parveen and Kabbashi, Nassereldeen Ahmed and Shahbuddin, Munira and Mohd. Nasir, Fatin Zulaikha and Mohd Hijab, Nadzihah (2019) IIUM Moringa technology for water treatment and ready-to-use therapeutic food for the treatment of malnutrition. In: Hyper-Interdisciplinary Conference 2019, 19th January 2019, Jalan Semarak, Kuala Lumpur. (Unpublished)

Janin, Zuriati and Sam, Rosidah and Masrie, Marianah and Abdul Kadir, Kushsairy and Mohamad Hanif, Noor Hazrin Hany and Gunawan, Teddy Surya (2019) Performance evaluation for SE 113 flow control system plant using self-tuning fuzzy PI controller. In: 5th IEEE International Conference on Smart Instrumentation, Measurement and Application (ICSIMA 2018), 28th-30th Nov. 2018, Songkhla, Thailand.

Jarin, Sams and Saleh, Tanveer (2019) Artificial neural network modelling and analysis of carbon nanopowder mixed micro wire electro discharge machining of gold coated doped silicon. International Journal of Materials Engineering Innovation, 10 (4). pp. 346-363. ISSN 1757-2754 E-ISSN 1757-2762

Jasni, Farahiyah and Hamzaid, Nur Azah and Yahya Al-Nusairi, Tawfik and Mohd Yusof, Nur Hidayah and Shasmin, Hanie Nadia (2019) Feasibility of a gait phase identification tool for transfemoral amputees using piezoelectric- based in-socket sensory system. IEEE Sensors Journal, 19 (5). pp. 6437-6444. ISSN 1530-437X

Jaswar, Fitri Dewi and Abd. Rahman, Tharek and Ahmad, Yasser Asrul (2019) Design and validation of an adaptive Cubesat transmitter system using a Thermal Vacuum Chamber (TVAC). International Journal of Recent Technology and Engineering (IJRTE), 8 (3S2). pp. 207-212. ISSN 2277-3878

Jaswar, Fitri Dewi and Al-Samman, Ahmed M. and Abd Rahman, Tharek and Ahmad, Yasser Asrul (2019) Design and validation of an adaptive CubeSat transmitter system. International Journal of Electronics and Communications (AEÜ), 108. pp. 118-126. ISSN 1434-8411

Jaya, Ramadhansyah Putra and Masri, Khairil Azman and Ali, Mohammad Idris and Wan Azahar, Wan Nur Aifa and Ekarizan, S. and Hainin, Mohd Rosli and A. H., Norhidayah and Yaacob, Haryati (2019) Voids characteristic of hot mix asphalt containing waste cooking oil. In: National Colloquium on Wind and Earthquake Engineering, 17 - 18 Aug 2018, Kuantan, Pahang.

Jazlan, Ahmad and Zulfiqar, Umair and Sreeram, Victoria and Kumar, Deepak and Togneri, Roberto and Mohd Zaki, Hasan Firdaus (2019) Frequency interval model reduction of complex FIR digital filters. Numerical Algebra, Control & Optimization, 9 (3). pp. 319-329. ISSN 2155-3289 E-ISSN 2155-3297

Jimat, Dzun Noraini and Sulaiman, Sarina and Ahmad Nor, Yusilawati and Mohamed Azmin, Nor Fadhillah and Syed Putra, Sharifah Shahira (2019) Physicochemical characteristics of bionanocomposites, polycaprolactone/starch/cocoa pod husk microfibrillated cellulose. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 199-208. ISSN 2289-7879

K

Kamal Ariffin, Fathin Nadhirah and Ahmad Nor, Yusilawati and Sulaiman, Sarina and Jamal, Nur Ayuni Jamal (2019) Treatment of waste engine oil using optimized acid/clay refining method. Biological and Natural Resources Engineering Journal, 2 (2). pp. 37-48. ISSN 2637-0719

Kamaruddin, Shafie and Abd Latif, Mohd Arif Hafizi (2019) Application of the bees algorithm for constrained mechanical design optimisation problem. International Journal of Engineering Materials and Manufacture, 4 (1). pp. 27-32. E-ISSN 0128-1852

Kamarudin, Norlizawati and Karim, Jamilah and Md Ralib, Aliza Aini (2019) Gm/ID approach for low power sustaining amplifier circuit for GHz range MEMS SAW oscillator. In: "2019 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2019", 21 -23 August 2019, Genting Highland, Pahang.

Kartiwi, Mira and Gunawan, Teddy Surya (2019) Cyberbullying in e-Learning platform: a text mining analytics. In: International Conference on E-Learning 2019, 21 - 22 Aug 2019, Kuching, Sarawak.

Kartiwi, Mira and Gunawan, Teddy Surya and Arundina, Tika and Omar, Mohd. Azmi (2019) Feature selection for financial data classification: Islamic finance application. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Kasim, Norhidayu and Sulaiman, Mohd Rozaiman and Abu Taib, Kamarudin (2019) The potential utilization of ultra-high performance concrete for bridge construction in Malaysia. IOP Conference Series: Materials Science and Engineering, 512. pp. 1-8. ISSN 1757-8981 E-ISSN 1757-899X

Khairuddin, Safiah and Ahmad, Salmiah and Embong, Abd Halim and Nik Hashim, Nik Nur Wahidah and Hassan, Surul Shahbudin (2019) Features identification and classification of alphabet (ro) in leaning (Al-Inhiraf) and repetition (Al-Takrir) characteristics. In: "2019 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2019", 29 June 2019, Selangor.

Khalifa, Othman Omran and Ahmed, Diaa Eldin Mustafa and Hassan Abdalla Hashim, Aisha and Yagoub, Mudathir (2019) Video streaming over Ad hoc on-demand distance vector routing protocol. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 863-874. ISSN 2302-9285 E-ISSN 2089-3191

Khalifa, Othman Omran and Ahmed, Musse Mohamud and Hawlader, Mohammad Nurul Alam (2019) Photovoltic energy conversion technologies : an overview and modelling. In: Solar energy fundamentals, inverters and systems. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 40-61. ISBN 978-967-418-482-7

Khalifa, Othman Omran and Jawed, Bilal and Bhuiyn, Sharif Shah Newaj (2019) Principal component analysis for human gait recognition system. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 571-578. ISSN 2302-9285

Khalifa, Othman Omran and Khan, Sheroz and Musse, Mohamud Ahmed (2019) Solar energy: fundamentals, inverters and systems. IIUM Press, International Islamic University Malaysia, Kuala Lumpur. ISBN 978-967-418-482-7

Khalifa, Othman Omran and Nasser, Youcef (2019) براءات الاختراع في الوطن العربي (the status of patents in the Arab World: an evaluation introductory). مجلة المستقبل العربي (Arab Future), 41 (481). pp. 28-45. ISSN 1024-9834

Khalifa, Othman Omran and Noralya Fatin, Noralya Fatin (2019) Performance analysis of LDPC channel coding in 4G systems. International Journal of Recent Technology and Engineering (IJRTE), 8 (1). pp. 1667-1670. ISSN 2277-3878

Khalifa, Othman Omran and Roslin, Raihan Jannati and Bhuiyan, Sharif Shah Newaj (2019) Improved voice quality with the combination of transport layer & audio codec for wireless devices. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 667-675. ISSN 2089-3191 E-ISSN 2302-9285

Khalili, Amjad and Abbadi, Ala’ and Ismail, Md Yusof (2019) Perspective of social media as an organisational KM tool: contemporary literature review. International Journal Knowledge and Learning, 13 (1). pp. 10-24.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2019) Quality management practices and sustainable performance: examining the role of soft TQM as mediator. International Journal of Industrial and Systems Engineering, 31 (2). pp. 250-277. ISSN 1748-5037 E-ISSN 1748-5045

Khalili, Amjad and Karim, A.N. Mustafizul and Ismail, Md Yusof and Che Daud, Mohd Radzi (2019) Linkages of QMS and soft EMS: perceptions of operations managers as modelled by SEM. International Journal of Services and Operations Management, 34 (3). pp. 341-360. ISSN 1744-2389

Khamis, S.Z. and Othman, Mohd Hilmi and Hasan, Sulaiman and Main, Nor Mazlana and Masrol, Shaiful Rizal and Shaari, Muhammad Farid and Ibrahim, Siti Noorjannah and Salim, Sabiha M. (2019) Multiple responses optimisation in injection moulding parameter for polypropylene-nanoclay-gigantochloa Scortechinii via Taguchi method. In: International Conference on Mechanical and Manufacturing Engineering (ICME2018), 16th-17th July 2018, Johor Bahru, Johor.

Khamis, Siti Salwa and Purwanto, Hadi and Rozhan, Alya Naili and Abd. Rahman, Mohamed and Mohd. Salleh, Hamzah (2019) Characterization of municipal solid waste in Malaysia for energy recovery. IOP Conference Series: Earth and Environmental Science, 264 (1). pp. 1-6. ISSN 1755-1307 E-ISSN 1755-1315

Khan, Burhan Ul Islam and Olanrewaju, Rashidah Funke and Anwar, Farhat and Mir, Roohie Naaz (2019) ECM-GT: design of efficient computational modelling based on game theoretical approach towards enhancing the security solutions in MANET. International Journal of Soft Computing and Engineering, 8 (7). pp. 506-519. ISSN 2278-3075

Khan, Burhan Ul Islam and Olanrewaju, Rashidah Funke and Anwar, Farhat and Mir, Roohie Naaz and Oussama, Allama and Jusoh, Ahmad Zamani (2019) Internet of things: the concept, inherent security challenges and recommended solutions. In: Smart Network Inspired Paradigm and Approaches in IoT Applications. Springer, Singapore, pp. 63-86. ISBN 978-981-13-8613-8

Khan, Burhan ul Islam and Olanrewaju, Rashidah Funke and Anwar, Farhat and Yaacob, Mashkuri (2019) Offline OTP based solution for secure internet banking access. In: 2018 IEEE Conference on e-Learning, e-Management and e-Services (IC3e), 21-22 Nov. 2018, Langkawi, Kedah.

Khan, Shaheer Ahmed and Rahman, Mohammed Ataur (2019) Efficiency of thin film photovoltaic paint: a brief review. Blue Eyes Intelligence Engineering & Sciences Publication, 7 (6S). pp. 163-169. ISSN 2277-3878

Khan, Sher Afghan and Aabid, Abdul and Chaudhary, Zakir Ilahi (2019) Influence of control mechanism on the flow field of duct at Mach 1.2 for area ratio 2.56. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1135-1138. ISSN 2278-3075

Khan, Sher Afghan and Aabid, Abdul and Ghasi, Fharukh Ahmed Mehaboobali and Al-Robaian, Abdulrahman and Alsagri, Ali Sulaiman (2019) Analysis of area ratio in a CD nozzle with suddenly expanded duct using CFD method. CFD Letters, 11 (5). pp. 61-71. ISSN 2180-1363

Khan, Sher Afghan and Aabid, Abdul and Mokashi, Imran and Ahmad, Zaheer (2019) Effect of micro jet control on the flow filed of the duct at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1758-1762. E-ISSN 2277-3878

Khan, Sher Afghan and Aabid, Abdul and Mokashi, Imran and Al-Robaian, Abdul Rehman Abdullah and Alsagri, Ali Sulaiman (2019) Optimization of two-dimensional wedge flow field at supersonic Mach number. CFD Letters, 11 (5). pp. 80-97. ISSN 2180-1363

Khan, Sher Afghan and Aabid, Abdul and Saleel, Ahamad C. (2019) CFD simulation with analytical and theoretical validation of different flow parameters for the wedge at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 19 (1). pp. 170-177. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Aabid, Abdul and Saleel, Ahmed (2019) Influence of micro jets on the flow development in the enlarged duct at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering, 19 (1). pp. 70-82. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Ahmad, Zaheer and Aabid, Abdul and Mokashi, Imran (2019) Experimental research on flow development and control effectiveness in the duct at high speed. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1763-1768. E-ISSN 2277-3878

Khan, Sher Afghan and Alrobaian, Abdul Rahman and Asad Ullah, Mohammed and Khan, Abdul Mohsin (2019) Grooved cavity as a passive controller behind backward facing step. International Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 185-193. ISSN 2289-7879

Khan, Sher Afghan and Alrobaian, Abdul Rahman and Asad Ullah, Mohammed and Rao, Ashwin (2019) Threaded spikes for bluff body base flow control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 194-203. E-ISSN 2289-7879

Khan, Sher Afghan and Mohiuddin, M and Saleel, Ahmad C and G M, Fharukh (2019) Investigation of the effects of nozzle exit mach number and nozzle pressure ratio on axisymmetric flow through suddenly expanded nozzles. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3). pp. 570-578. E-ISSN 2249 – 8958

Khan, Sher Afghan and Mokashi, Imran and Aabid, Abdul and Faheem, Mohammad (2019) Experimental research on wall pressure distribution in C-D nozzle at Mach number 1.1 for area ratio 3.24. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 971-975. E-ISSN 2277-3878

Khan, Talha Ahmed and Shaikh, Faraz Ahmed and Khan, Sheroz and Siddiqui, M Farhan (2019) Real-time wireless monitoring for three phase motors in industry: a cost-effective solution using IoT. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

L

Ladipo, Ismail and Ridhuan Siradj, Fadly Jashi Darsivan and Waleed, Fekry Faris (2019) Computational validation of magnetorheological elastomers for engine mount application. International Journal of Recent Technology and Engineering, 7 (6S). pp. 180-184. E-ISSN 2277-3878

Lazim, Nurul Hakimah and Samat, Noorasikin (2019) The influence of irradiated recycled polypropylene compatibilizer on the impact fracture behavior of recycled polypropylene/microcrystalline cellulose composites. Polymer Composites, 40. E24-E34. ISSN 0272-8397 E-ISSN 1548-0569

Legowo, Ari and Sulaeman, Erwin and Rosli, Danial (2019) Review on system identification for quadrotor Unmanned Aerial Vehicle (UAV). In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), 26th March-10th April 2019, Dubai, United Arab Emirates.

Legowo, Ari and Sulaeman, Erwin and Rosli, Muhammad Danial (2019) Developing magnetic damper system for microsatellite. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 93-99. ISSN 2277-3878 E-ISSN 2249-8958

Lionnie, Regina and Agustina, Ellisa and Sediono, Wahju and Alaydrus, Mudrik (2019) Biometric identification using augmented database. Telkomnika (Telecommunication Computing Electronics and Control), 17 (1). pp. 103-109. ISSN 1693-6930 E-ISSN 2302-9293

Lionnie, Regina and Attamimi, Said and Sediono, Wahju and Alaydrus, Mudrik (2019) Biometric identification with limited data set. In: 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar (EECCIS), 9th-11th October 2018, Batu, East Java, Indonesia.

M

Mahmud, Israa Ali and Mirghani, Mohamed Elwathig Saeed and Al-Qubaisi, Mothanna and , Beh Yee and Ismail, Norsharina and Rasedee, Abdullah and Yusof, Faridah and Shahabuddin, Munira and Al-khatib, Ma'an and Kabbashi, Nassereldeen Ahmed and Hashim, Yumi Zuhanis Has-Yun and Hilles, Ayah and Abbas, Phirdaous (2019) Induction of apoptosis and cell cycle arrest in two human cancer A549 and HT29 cells lines by Barhi date palm kernels extracts and three isolated cytotoxic compounds. Preprint. pp. 1-37. (Unpublished)

Mahshar, Mohd Nizam and Hafeedz, Ijlal Hannan and Wan Salim, Wan Wardatul Amani (2019) Wawasan kemakmuran bersama 2030. Policy Paper. Ministry of Economic Affairs, Kuala Lumpur.

Maidul, Isla and Okasha, Mohamed Elsayed Aly Abd Elaziz and Sulaeman, Erwin (2019) A Model Predictive Control (MPC) approach on unit quaternion orientation based quadrotor for trajectory tracking. International Journal of Control, Automation and Systems, 17 (11). pp. 2819-2832. ISSN 1598-6446 E-ISSN 2005-4092

Maleque, Md. Abdul and Azwan, M. and Afiq, M. (2019) Sliding wear of SiC reinforced duplex stainless steel via TIG torch surface melting technique. Recent Patents on Engineering. ISSN 1872-2121 E-ISSN 2212-4047 (In Press)

Maleque, Md. Abdul and Idris, Nazrin and Rahman, Mohammad M. and Sayeed Hossain, Mohammad (2019) Particulate composite protective coating using conventional melting approach. In: Encyclopedia of renewable and sustainable materials. Elsevier, pp. 1-9. (In Press)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2019) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754 E-ISSN 1757-2762

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md. Mustafizur (2019) Optimisation of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754

Malik, Khurshid and Aldheeb, Mohammad and Asrar, Waqar and Sulaeman, Erwin (2019) Effects of bio-inspired surface roughness on a swept back tapered NACA 4412 wing. Journal of Aerospace Technology and Management, 11. e1719. ISSN 1984-9648 E-ISSN 2175-9146

Mamat, M. Azwan and Maleque, Md. Abdul and Rahman, Md Mustafizur (2019) TIG torch surfacing of metallic materials – a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 0020-2967 E-ISSN 1745-9192

Mamun, Abdullah Al and Ahmed, Yehya M. and Al Khatib, Ma’an Fahmi Rashid and Jameel, Ahmad T. and Al Saadi, Mohammed A. (2019) The optimum condition for the synthesis of carbon nanofibers on activated carbon to remove lead from aqueous solution. International Journal of Nanoelectronics and Materials, 12 (2). pp. 135-144. ISSN 1985-5761 E-ISSN 2232-1535

Maqbool, Hafiz Farhan and Husman, Muhammad Afif and Awad, Mohammed Ibrahim and Abouhossein, Alireza and Iqbal, Nadeem and Tahir, Mehak and Dehghani-Sanij, Abbas Ali (2019) Heuristic real-time detection of temporal gait events for lower limb amputees. IEEE Sensors Journal, 19 (8). pp. 3138-3148. ISSN 1530-437X

Marcel, Soropogui Keamou and Alkhatib, Ma'an Fahmi Rashid and Jami, Mohammed Saedi and Zainudin, Zaki (2019) Bauxite mining and refinery: investigating prospective red mud management strategies. Journal of Engineering Science and Technology, Special Issue on SU18. pp. 120-134. ISSN 1823-4690

Masadan, Nurul Afifah and Habaebi, Mohamed Hadi and Yusoff, Siti Hajar (2019) Long range channel characteristics through foliage. Bulletin of Electrical Engineering and Informatics (BEEI), 8 (3). pp. 941-950. ISSN 2089-3191 E-ISSN 2302-9285

Mashros, Nordiana and Wan Azahar, Wan Nur Aifa and Hainin, Mohd Rosli and M. Warid, Muhammad Naqiudin and A. H., Norhidayah and Yaacob, Haryati and Ahmad, Juraidah and Putra Jaya, Ramadhansyah (2019) Rutting resistance of untreated and treated waste cooking oil in bitumen after aging condition. In: National Colloquium on Wind & Earthquake Engineering, 17th-18th August 2018, Kuantan, Pahang.

Mat Esa, Mohamad Khairul Azmi and Mansor, Hasmah and Gunawan, Teddy Surya and Janin, Zuriati (2019) Mamdani-based fuzzy logic controller for travel angle control of bench-top helicopter. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Mat Rosly, Muhammad Hadi and Sidek, Shahrul Na'im and Ahmad Puzi, Asmarani and Md. Yusof, Hazlina and Daud, Narimah and Mat Rosly, Maziah (2019) Clasp-knife model of muscle spasticity for simulation of robot-human interaction. IEEE Access, 7. pp. 1355-1364. E-ISSN 2169-3536

Md Ralib @ Md Raghib, Aliza 'Aini and Zulfakher, Nur Wafa Asyiqin and Ab Rahim, Rosminazuin and Za'bah, Nor Farahidah and Mohamad Hanif, Noor Hazrin Hany (2019) Finite element simulation of MEMS piezoelectric energy scavenger based on pzt thin film. IIUM Engineering Journal, 20 (1). pp. 90-99. ISSN 1511-788X E-ISSN 2289-7860

Md Zaki, Fatimah Audah and Zulkurnain, Nurul Fariza (2019) Improved BVBUC algorithm to discover closed itemsets in long biological datasets. Applied Mechanics and Materials, 892. pp. 157-167. ISSN 1662-7482

Md. Husain, Nadiah and Ismail, Norfarah Nadia and Mohd Ismail, Kamsiah and Syamsunur, Deprizon and Mohd Taib, Mariati (2019) Development of high workability grout on semi rigid wearing course. In: 10th Malaysian Road Conference and Exhibition 2018, 29th-31st October 2018, Petaling Jaya, Selangor.

Md. Zaki, Fatimah Audah and Zulkurnain, Nurul Fariza (2019) Frequent itemset mining in high dimensional data: a review. In: 5th International Conference on Computational Science and Technology (ICCST 2018), 29th-30th August 2018, Kota Kinabalu, Sabah.

Mehdi, Wesen Adel and Mehde, Atheer Awad and Yusof, Faridah and Ahmad Raus, Raha and Resen, Ali Khudhair and Ghazali, Hamid (2019) The endothelial nitric oxide synthase gene G894T, glutathione S-transferase (GSTM1 and GSTT1) polymorphisms as a risk factor in the patient with nephrolithiasis. International Journal of Biological Macromolecules, 140. pp. 719-726. ISSN 0141-8130 E-ISSN 1879-0003

Mehraj, Tehseen and Khan, Burhan Ul Islam and Olanrewaju, Rashidah Funke and Anwar, Farhat and Jusoh, Ahmad Zamani (2019) An adaptive and viable face identification for Android mobile devices. In: Handbook of Multimedia Information Security: Techniques and Applications,. Springer, Cham, Switzerland, pp. 301-322. ISBN 978-3-030-15886-6

Mehraj, Tehseen and Khan, Burhan ul Islam and Olanrewaju, Rashidah Funke and Anwar, Farhat and Jusoh, Ahmad Zamani (2019) Critical challenges in access management schemes for smartphones: an appraisal. In: Smart Network Inspired Paradigm and Approaches in IoT Applications. Springer, Singapore, pp. 87-113. ISBN 978-981-13-8613-8

Meor Said, Mior A and Mohd Sohimin, Muhammad H F and Abu Hussain, Nurulakmar and Abd Rahman, Badruzzaman and Tuan Kamaruddin, Tengku Nordayana Akma and Mohamad Jamil, Siti Nurnadilla and Balaka, Ridway and Abu Kassim, Khairil A (2019) Rearward visibility technology in ASEAN market. In: 4th International Conference & Sustainable Mobility (ICSM), 21st-22nd November 2019, Bali, Indonesia. (Unpublished)

Midi, Nur Shahida and Rahmad, Muhammad Aizat and Yusoff, Siti Hajar and Mohamad, Sarah Yasmin (2019) Recyclable waste separation system based on material classification using weight and size of waste. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 479-489. ISSN 2089-3191 E-ISSN 2302-9285

Mirghani, Mohamed Elwathig Saeed (2019) Rambutan (Nephelium lappaceum) fats. In: Fruit oils: chemistry and functionality. Springer Cham, Springer Nature Switzerland AG 2019, pp. 273-280. ISBN 978-3-030-12472-4

Mochammad Sahid, Mualimin and Fettane, Amar (2019) Kemahiran bahasa Arab: penanda aras agenda integrasi ilmu naqli dan aqli = Arabic language skills: a bench mark for integration of naqli and aqli knowldege agenda. International Journal of Education, Psychology and Counseling, 4 (29). pp. 12-23. E-ISSN 0128-164x

Mochammad Sahid, Mualimin and Fettane, Amar and Mohamed, Mohd Faisal (2019) فقه المعاملات المالية: دراسة تحليلية وصفية لنظرية الملكية في الإسلام = Fiqh of financial transaction: descriptive and analytical study on ownership concept in Islam. In: The 3rd International Conference on Law & Justice (ICLJ) 2019, 5th-6th November 2019, Kuala Lumpur.

Mohamed, Ruziana and Abdul Rasul, Nur Farhaim and Yahya, Norihan and Mamat, Hafiz and Malek, Mohd Firdaus and Ismail, Ahmad Syakirin and Mohd Yusoff, Marmeezee and Senawi, Syamsyir Akmal and Rusop, Mohamad (2019) The influence of sintering temperature to the structural and densification of silica doped zinc oxide for varistor application. In: Nanoscience And Nanotechnology: Nano-Scitech, 26 Feb – 1 Mar 2018, Selangor.

Mohamed Ali, Jaffar Syed and Mir Owais, Ali Ibrahim and Miah Mohammed, Riyadh (2019) Educational software for stress analysis of non-idealized closed thin-walled sections. International Journal of Engineering & Technology, 7 (6S). pp. 196-202. E-ISSN 2277-3878

Mohamed Haider, Farag I. and -, Suryanto (2019) Carbon diffusion in 304I austenitic stainless steel at 650 steel at 650 -750°c in carburizing environment. International Journal of Recent Technology and Engineering (IJRTE, 7 (6). pp. 76-78. ISSN 2277-3878

Mohamed Yatim, Norazlina and Shaaban, Azizah and Dimin, Mohd Fairuz and Mohamad, Noraiham and Yusof, Faridah (2019) Urea functionalized multiwalled carbon nanotubes as efficient nitrogen delivery system for rice. Advances in Natural Sciences: Nanoscience and Nanotechnology, 10 (1). pp. 1-12. ISSN 2043-6254 E-ISSN 2043-6262

Mohammad Yosi, Aqila Nur Nadira and Sidek, Khairul Azami and Yaacob, Hamwira Sakti and Othman, Marini and Jusoh, Ahmad Zamani (2019) Emotion recognition using electroencephalogram signal. Indonesian Journal of Electrical Engineering and Computer Science, 15 (2). pp. 786-793. ISSN 2502-4752 E-ISSN 2502-4760

Mohammed, Mohammed Idris and Sulaeman, Erwin and Musthapa, Faizal (2019) Adopting dynamic transient response analysis for sensors positioning to monitor cable stayed bridge. International Journal of Recent Technology and Engineering, 7 (6S). pp. 54-60. ISSN 2277-3878 E-ISSN 2249-8958

Mohd Zakuan, Muhammad Amir Mirza and Aabid, Abdul and Khan, Sher Afghan (2019) Modelling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology, 9 (1). pp. 6820-6828. ISSN 2249-8958

Mohd Akhir, Nur Atiqah and Syed Shaharuddin, Sharifah Imihezri and Buys, Yose Fachmi and Othman, Maizatulnisa and Shaffiar, Norhashimah (2019) Characterization of poly (lactic acid) _ poly (ethylene) glycol blends prepared for melt drawn spinning process. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) 2019, 27th-29th November 2018, Penang.

Mohd Ariffin, Khairul Anuar and Sukindar, Nor Aiman and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2019) The effect of process parameters in extruding scaffold design using synthetic biomaterials. International Journal of Modern Manufacturing Technologies, XI (3). pp. 35-46. ISSN 2067–3604

Mohd Asyraf, Mohd Razib and Saleh, Tanveer (2019) A review on micro-patterning processes of vertically aligned carbon nanotubes array (VACNTs Array). Current Nanoscience, 15 (4). pp. 328-353. ISSN 1573-4137

Mohd Daud, Farah Diana and Johari, Muhammad Hilmi and Ahmad Jamal, Afiq Haikal and Kahlib, Nor Amyra Zulianey and Hairin, Assayidatul Laila Nor (2019) Preparation of nano-silica powder from silica sand via sol-precipitation method. In: "International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018", 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

Mohd Hafidz, N.S. and Mohamed Rehan, Muhammad Saifuddin (2019) Experimental testing of oil palm fibre composite manufactured via vacuum bagging method. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Mohd Hatta, Maziati Akmal and Md Ralib @ Md Raghib, Aliza 'Aini and Abd Rashid, Mohd Warikh (2019) Vibrational piezoelectric energy harvester’s performance using lead zirconate titanate versus lead-free potassium sodium niobate. Materials Research Express, 6 (11). pp. 1-11. ISSN 2053-1591 E-ISSN 2053-1591

Mohd Ibrahim, Azhar and Venkat, Ibrahim and De Wilde, Philippe (2019) The impact of potential crowd behaviours on emergency evacuation: an evolutionary game theoretic approach. Journal of Artificial Societies and Social Simulation, 22 (1). pp. 1-15. ISSN 1460-7425

Mohd Isa, Farah Nadia and Kamaludin, Nur H. and Abdul Malek, Norun Farihah and Mohamad, Sarah Yasmin (2019) Compact UWB slotted pentagonal patch antenna for radar and communication. In: 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 7 - 12 July 2019, Atlanta, United States.

Mohd Johari, Nabila Husna and Abdul Malik, Noreha and Sidek, Khairul Azami (2019) Distinctive features for normal and crackles respiratory sounds using cepstral coefficients. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 875-881. ISSN 2302-9285

Mohd Khairi, Mohamad Azim and Ab Rahim, Rosminazuin and Saidin, Norazlina and Abdullah, Yusof and Hasbullah, Nurul Fadzlin (2019) Silicon carbide schottky diodes forward and reverse current properties upon fast electron radiation. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 428-437. ISSN 2302-9285,

Mohd Khairi, Mohamad Azim and Abdullah, Yusof and Ab Rahim, Rosminazuin and Hasbullah, Nurul Fadzlin (2019) Durability of 4H-SiC Schottky power diodes irradiated with high-energy bombarding electrons. IET Circuits, Devices & Systems, xx (xx). pp. 1-7. ISSN 1751-858X E-ISSN 1751-8598 (Unpublished)

Mohd Nor, Norhanis Aida and Komanec, Matej and Bohata, Jan and Ghassemlooy, Zabih and Bhatnagar, Manav R. and Zvanovec, Stanislav (2019) Experimental all-optical relay-assisted FSO link with regeneration and forward scheme for ultra-short pulse transmission. OSA Optics Express, 27 (16). pp. 22127-22137.

Mohd Pu'ad, Muhamad Farhan and Sidek, Khairul Azami and Mel, Maizirwan (2019) Portable water quality monitoring system for aquaponics using We MOS. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (1). pp. 4181-4184. ISSN 2278-3075

Mohd Pu’ad, Muhammad Farhan and Gunawan, Teddy Surya and Kartiwi, Mira and Janin, Zuriati (2019) Performance evaluation of portable air quality measurement system using raspberry Pi for remote monitoring. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). pp. 564-574. ISSN 2502-4752

Mohd Ramli, Huda Adibah and Mohd Isa, Farah Nadia and Asnawi, Ani Liza and Jusoh, Ahmad Zamani and Azman, Amelia Wong (2019) Urgency-aware scheduling algorithm for downlink cognitive long term evolution-advanced. In: 2019 IEEE 89th Vehicular Technology Conference (VTC Spring), 28 April-1st May 2019, Kuala Lumpur.

Mohd Romlay, Mohamad Rabani and Mohd. Ibrahim, Azhar and Toha, Siti Fauziah and Rashid, Muhammad Mahbubur (2019) Two-wheel balancing robot; review on control methods and experiments. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 106-112. E-ISSN 2277-3878

Mohd Romlay, Muhammad Rabani and Rashid, Muhammad Mahbubur and Toha @ Tohara, Siti Fauziah and Mohd Ibrahim, Azhar (2019) Rainfall-rinoff model based on ANN with LM, BR and PSO as learning algorithms. International Journal of Recent Technology and Engineering, 8 (3). pp. 971-979. ISSN 2277-3878

Mohd Romlay, Muhammad Rabani and Rashid, Muhammad Mahbubur and Toha @ Tohara, Siti Fauziah and Mohd Ibrahim, Azhar (2019) Rainfall-runoff model based on ANN with LM, BR and PSO as learning algorithms. International Journal of Recent Technology and Engineering (IJRTE), 8 (3). pp. 971-979. ISSN 2277-3878

Mohd Sajali, Muhammad Fahmi and Aabid, Abdul and Khan, Sher Afghan and Mehaboobali, Fharukh Ahmed Ghasi and Sulaeman, Erwin (2019) Numerical investigation of flow field of a non-circular cylinder. CFD Letters, 11 (5). pp. 37-49. ISSN 2180-1363

Mohd Suhaimi, Nur Farahana and Htike, Zaw Zaw (2019) Comparison of machine learning classifiers for dimensionally reduced fMRI data using random projection and principal component analysis. In: International Conference on Mechatronics, 30-31 Oct 2019, Putrajaya.

Mohd Umair, Siddique and Ansari, Emad and Khan, Sher Afghan and Alrobaian, Abdulrahman (2019) On numerical investigation of semi-empirical relation representing development length for a fluid flow in a closed conduit. CFD Letters, 11 (6). pp. 63-71. E-ISSN 2180-1363

Mohd Yusof, Muhammad Syafiq and Toha @ Tohara, Siti Fauziah (2019) Gait identification and optimisation for amphi-underwater robot by using ant colony algorithm. International Journal of Recent Technology and Engineering, 7 (6). pp. 277-283. ISSN 2277-3878

Mohd Yusof, Nur Hidayah and Hamzaid, Nur Azah and Jasni, Farahiyah and Khin, Wee Lai (2019) In-socket sensory system with an adaptive neuro-based fuzzy inference system for active transfemoral prosthetic legs. Journal of Electronic Imaging, 28 (2). p. 1. ISSN 1017-9909 E-ISSN 1560-229X

Mohd Yusoff, Marmeezee and Mamat, Mohamad Hafiz and Ismail, Ahmad Syakirin and Malek, Mohd Firdaus and Zoolfakar, Ahmad Sabirin and Abu Bakar, Suriani and Ahmad, Mohd Khairul and Mat Nayan, Nadirul Hasraf and Shameem Banu, Itreesh Basha and Rusop, Mohamad (2019) Low-temperature-dependent growth of titanium dioxide nanorod arrays in an improved aqueous chemical growth method for photoelectrochemical ultraviolet sensing. Journal of Materials Science: Materials in Electronics, 30 (2). pp. 1017-1033. E-ISSN 0957-4522

Mohiuddin, A. K. M. and Osman, Amirah and Uddin, Mohammad Faisal (2019) Development and investigation of a cooling system for a parked vehicle using solar energy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 87-92. ISSN 2277-3878 E-ISSN 2249-8958

Mollik, Md Shohag and Noor, Wazed Ibne and Saleh, Tanveer and Bazarah, Mohammed Gamal Abdulhameed (2019) Development of an active fixture for ultrasonically assisted micro electro-discharge machining. In: 7th IEEE International Conference on Mechatronics Engineering - ICOM'19, 30th-31st October 2019, Putrajaya.

Mollik, Md. Sazib and Rashid, Muhammad M. and Rahman, Mohammed Ataur and Hasan, Abul (2019) Temperature effect and battery charging characteristics analysis based on charging C-rate. International Journal of Engineering and Advanced Technology, 9 (1). pp. 159-165. ISSN 2249 – 8958

Monir, Md Fahad and Habaebi, Mohamed Hadi and Zyoud, Al-Hareth (2019) An improvement approach for reducing transmission power in wireless sensor networks. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (8S). pp. 65-75. ISSN 2278-3075

Monir, Minhaj Uddin and Abd Aziz, Azrina and Yousuf, Abu and Alam, Md Zahangir (2019) Hydrogen-rich syngas fermentation for bioethanol production using Sacharomyces cerevisiea. International Journal of Hydrogen Energy. pp. 1-9. ISSN 0360-3199 (In Press)

Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) An effect of sweep angle on roll damping derivative for a Delta wing with curved leading edges in unsteady flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9 (2). pp. 361-373. ISSN 2249-6890 E-ISSN 2249-8001

Monis, Renita Sharon and Shabana, Aysha and Crasta, Asha and Khan, Sher Afghan (2019) Effect of sweep angle and a half sine wave on roll damping derivative of a Delta Wing. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 984-989. E-ISSN 2277-3878

Mori, Shoji and Mt Aznam, Suazlan (2019) Pool boiling CHF enhancement using a honeycomb porous plate and nanofluid. In: 1ˢᵗ International Conference on Nanofluids and the 2nd European Symposium on Nanofluids, 26th -28th June 2019, Castello, Spain. (Unpublished)

Mori, Shoji and Mt Aznam, Suazlan and Yanagisawa, Ryuta and Yokomatsu, Fumihisa and Okuyama, Kunito (2019) Measurement of a heated surface temperature using a high-speed infrared camera during critical heat flux enhancement by a honeycomb porous plate in a saturated pool boiling of a nanofluid. Heat Transfer Engineering. ISSN 0145-7632 E-ISSN 1521-0537 (In Press)

Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Rahman, Tawfikur (2019) Design and control of a single phase synchronous inverter for microgrid. International Journal of Advanced Science and Technology, 28 (14). pp. 414-418. ISSN 2005-4238 E-ISSN 2207-6360

Mt Aznam, Suazlan and Che Ghani, Nor Artisham and Chowdhury, Md. Sazzad Hossien (2019) A numerical solution for nonlinear heat transfer of fin problems using the Haar wavelet quasilinearization method. Results in Physics, 14. pp. 1-8. ISSN 2211-3797

Mubarak, Sinil and Habaebi, Mohamed Hadi and Abdul Rahman, Farah Diyana and Khan, Sheroz and Islam, Md. Rafiqul (2019) Cyber attacks analysis and mitigation with machine learning techniques in ICS SCADA systems. Journal of Advanced Research in Dynamical and Control Systems, 11 (1). pp. 180-188. ISSN 1943-023X

Muhammad Harinder Khan, Nur Aqidah and Sulaiman, Siti Zubaidah and Izhab, Izirwan and Abdul Mudalip, Siti Kholijah and Che Man, Rohaida and Md Shaarani, Shalyda and Mohd Arshad, Zatul Iffah and Md Kasmani, Rafiziana and Sulaiman, Sarina (2019) The explosion severity of biogas(CH4-CO2)/air mixtures in a closed vessel. Materials Science and Technology, 964. pp. 33-39. ISSN 1662-9752

Muhammad Mokhtar, Nur Hamizah and Abdul Malek, Norun and Jusoh, Ahmad Zamani and Ali, Khamis and Mohd Isa, Farah Nadia and Abdul Rahman, Farah Diyana (2019) Design and comparison of printed antennas using meander line technique. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 596-603. ISSN 2089-3191 E-ISSN 2302-9285

Mujeli, Mustapha and Hussain, S. A. and Ismail, M. H. S. and Awang Biak, Dayang Radiah and Jami, Mohammed Saedi (2019) Screening of electrocoagulation process parameters for treated palm oil mill effluent using minimum-runs resolution IV design. International Journal of Environmental Science and Technology, 16 (2). pp. 811-820. ISSN 1735-1472 E-ISSN 1735-2630

Mukhtar, Azfarizal and Ng, Khai Ching and Yusoff, Mohd Zamri and Wah, Yen Tey and Lit, Ken Tan (2019) Performance assessment of passive heating and cooling techniques for underground shelter in equatorial climate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 20-32. E-ISSN 2289-7879

Mukhtar, Azfarizal and Yusoff, Mohd Zamri and Ng, Khai Ching (2019) The potential influence of building optimization and passive design strategies on natural ventilation systems in underground buildings: The state of the art. Tunnelling and Underground Space Technology, 92. pp. 1-18. ISSN 0886-7798

Mukit, Naimul and Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and Abdullah, Khaizuran and Abdul Malek, Norun Farihah and Nibir, Rauful and M Adnan, Noor Hidayah and Osman, Eid (2019) Designing large-scale antenna array using sub-array. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 906-915. ISSN 2302-9285

Murshiduzzaman, Murshiduzzaman and Saleh, Tanveer and Khan, Md. Raisuddin (2019) Modular robotic platform for autonomous machining. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 E-ISSN 1433-3015 (In Press)

Mustafa, Muhammad Hadi and Ali, Maisarah and Mohd Ismail, Kamsiah and Hashim, Khairusy Syakirin Has-Yun and Mohd Suhaimi, Mohamad Saiful Nizam (2019) BIM backed decision support system in the management of heritage building. International Journal of Built Environment and Sustainability, 6 (2). pp. 71-79. E-ISSN 2289-8948

Mustafa, Muhammad Hadi and Ali, Maisarah and Mohd Ismail, Kamsiah and Hashim, Khairusy Syakirin Has-Yun and Suhaimi, Mohamad Saiful Nizam (2019) Spatial analysis on Malay buildings for categorization of Malay historic BIM library. In: 4th International Conference-Workshop on Sustainable Architecture and Urban Design (ICWSAUD) 2019, 24-26th June 2019, Bukit Jambul Penang. (Unpublished)

N

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Khan, Sher Afghan and Pradeep, Aksatha (2019) The effect of replacement of natural sand by manufactured sand on the properties of the concrete. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018, 22nd-23rd Nov. 2018, Bangkok, Thailand.

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Ali, Maisarah (2019) Polyethylene Terehthalate (PET) bottles waste as fine aggregate in concrete. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1177-1180. E-ISSN 2278-3075

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Mohd Ismail, Kamsiah and Ali, Maisarah (2019) Polyethylene Terephthalate (PET) bottles waste as fine aggregate in concrete - a review. In: International Conference on Sustainable Urban Development Resource Conservation and Food Security, 26th-27th April 2019, Mangalore, India. (Unpublished)

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Saad, Siti Asmahani and Othman, Nur Hawa and Amiruddin, Ahmad Kamil and Ali, Maisarah (2019) The effect of recycled Polyethylene Terephthalate (PET) bottles waste as a fine aggregate replacement in concrete. In: 4th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME) 2019, 30th–31st October 2019, Putrajaya. (Unpublished)

Naeem, Jannatul and Hamzaid, Nur Azah and Islam, Md. Anamul and Azman, Amelia Wong and Bijak, Manfred (2019) Mechanomyography-based muscle fatigue detection during electrically elicited cycling in patients with spinal cord injury. Medical and Biological Engineering and Computing, 57 (6). pp. 1199-1211. ISSN 0140-0118 E-ISSN 1741-0444 (Unpublished)

Nafiah, Faris and Sophian, Ali and Khan, Md. Raisuddin and Abdul Hamid, Syamsul Bahrin and Zainal Abidin, Ilham Mukriz (2019) Image-based feature extraction technique for inclined crack quantification using pulsed eddy current. Chinese Journal of Mechanical Engineering (English Edition), 32 (1). pp. 1-9. ISSN 1000-9345 E-ISSN 2192-8258

Nafiah, Faris and Sophian, Ali and Khan, Md. Raisuddin and Zainal Abidin, Ilham Mukriz (2019) Modelling of scanning pulsed eddy current testing of normal and slanted surface cracks. Indonesian Journal of Electrical Engineering and Computer Science, 16 (3). pp. 1297-1302. ISSN 2502-4752 E-ISSN 2502-4752

Nafiah, Faris and Sophian, Ali and Khan, Md. Raisuddin and Zainal Abidin, Ilham Mukriz (2019) Quantitative evaluation of crack depths and angles for pulsed eddy current non-destructive testing. NDT and E International, 102. pp. 180-188. ISSN 0963-8695

Nagoor Gunny, Ahmad Anas and Arbain, Dachyar and Javed, Muhammad and Baghaei-Yazdi, Namdar and Gopinath, Subash C.B. and Jamal, Parveen (2019) Deep eutectic solvents-halophilic cellulase system: An efficient route for in situ saccharification of lignocellulose. Process Biochemistry, 81. pp. 99-103. ISSN 1359-5113

Nasaruddin, Ricca Rahman and Yao, Qiaofeng and Chen, Tiankai and Hülsey, Max J. and Yan, Ning and Xie, Jianping (2019) Structural transformation and ligand dynamic of gold nanocluster during a catalytic reaction. In: Southeast Asia Catalysis Conference, 23rd - 24th May 2019, Singapore. (Unpublished)

Nasir, Sidra and Zahid, Mohammad Noman and Khan, Talha Ahmed and Kadir, Kushsairy Abdul and Khan, Sheroz (2019) Augmented reality application for architects and interior designers: interno a cost effective solution. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Natalia, Friska and Meidia, Hira and Afriliana, Nunik and Al-Kafri, Ala S. and Sudirman, Sud and Simpson, Andrew and Sophian, Ali and Al-Jumaily, Mohammed and Al-Rashdan, Wasfi and Bashtawi, Mohammad (2019) Development of ground truth data for automatic lumbar spine MRI image segmentation. In: IEEE 20th International Conference on High Performance Computing and Communications, 16th IEEE International Conference on Smart City and 4th IEEE International Conference on Data Science and Systems, HPCC/SmartCity/DSS 2018, 28-30 June 2018, Exeter; United Kingdom.

Nawawi, Luqman Hakim and Khalifa, Othman Omran and Abdul Rahman, Farah and Nasir, Haidawati (2019) Location and position estimation of wireless devices. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27th-29th August 2019, Kuala Lumpur, Malaysia.

Ng, Khai Ching and Ng, Y.L. and Sheu, Tony Wen Hann and Mukhtar, Azfarizal (2019) Fluid-solid conjugate heat transfer modelling using weakly compressible smoothed particle hydrodynamics. International Journal of Mechanical Sciences, 151. pp. 772-784. ISSN 0020-7403

Ngabura, Mohammed and Hussain, Siti Aslina and Ab Karim Ghani, Wan Azlina and Jami, Mohammed Saedi and Tan, Yen Ping (2019) Optimization and activation of renewable durian husk for biosorption of lead(II) from an aqueous medium. Journal of Chemical Technology & Biotechnology, 94 (5). pp. 1384-1396. ISSN 0268-2575 E-ISSN 1097-4660

Nik Abdul Ghani, Nik Rashida and Jami, Mohammed Saedi and Ku Abdullah, Ku Mariam Zainab (2019) Adsorption studies of graphene oxide for lead removal from synthetic wastewater. Biological and Natural Resources Engineering Journal, 2 (2). pp. 21-36. E-ISSN 2637-0719

Nik Mohd Rahimi, Nik Azimah Zainab and Mohamad Hanif, Noor Hazrin Hany and Janin, Zuriati (2019) Mobile applications for teaching and learning Arabic braille. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Noor, Wazed Ibne and Rashid, Mir Akmam Noor and Saleh, Tanveer (2019) Micromachining using fiber laser for various metallic workpieces. In: FEIIC - International Conference on Engineering Education and Research FICEER 2019, 2nd-5th November 2019, Makkah, Kingdom of Saudi Arabia.

Nor Hairin, Assayidatul Laila and Idris, Mohd Fitri and Othman, Raihan and Mohd Daud, Farah Diana and Rozhan, Alya Naili and Mohd Zaki, Hafizah Hanim (2019) Effect of acceptor impurity (Cu and Al) in Zn4Sb3 thermoelectric materials via hotisostatic pressing (HIP) method. In: Materials characterization using x-rays and related techniques, 18th-19th August 2018, Kota Bharu Kelantan.

Nor Shahrudin, Nur Shahirah and Sidek, Khairul Azami and Jusoh, Ahmad Zamani (2019) Electrocardiogram (ECG) based stress recognition integrated with different classification of age and gender. Indonesian Journal of Electrical Engineering and Computer Science, 15 (1). pp. 199-210. ISSN 2502-4752 E-ISSN 2502-4760

Nordin, Norfaizul Izwan and Ab Rahim, Rosminazuin and Md Ralib @ Md Raghib, Aliza 'Aini (2019) Flexible PVDF thin film as piezoelectric energy harvester. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 443-449. ISSN 2089-3191 E-ISSN 2302-9285

Norhisham, Shuhairy and Abu Bakar, Muhammad Fadhlullah and Tajri, Azri Ahmad and Mohamad, Daud and Yatuka, Sotaro and Masjuki, Siti Aliyyah (2019) Assessing stakeholder’s view for quality bus services in Kuala Lumpur. International Journal of Advanced Science and Technology, Volume 28 (10). pp. 359-369. ISSN 2005-4238 E-ISSN 2207-6360

Norsahperi, N.M.H. and Ahmad, Salmiah and Toha, Siti Fauziah and Mahmood, I.A. (2019) Analysis and practical validation on a multi-linkage scissor platform's drive system for the satellite test facilities. International Journal of Heavy Vehicle Systems. ISSN 1744-232X E-ISSN 1741-5152 (In Press)

Nyein Naing, Wai Yan and Htike, Zaw Zaw (2019) Glass break detection system using deep auto encoders with fuzzy rules induction algorithm. International Journal of Advanced and Applied Sciences, 6 (2). pp. 33-38. ISSN 2313-626X E-ISSN 2313-3724

Nyein Naing, Wai Yan and Htike, Zaw Zaw and Shafie, Amir Akramin (2019) Real time end-to-end glass break detection system using LSTM deep recurrent neural network. International Journal of Advanced and Applied Sciences, 6 (3). pp. 56-61. ISSN 2313-626X E-ISSN 2313-3724

O

Ogu Salim, Nurhainis and Md Yusuf, Noor Azian and Ahmad Fuad, Fazia Adyani (2019) Plasmodial enzymes in metabolic pathways as therapeutic targets and contemporary strategies to discover new antimalarial drugs: a review. Asia-Pacific Journal of Molecular Biology and Biotechnology, 27 (4). pp. 38-53. E-ISSN 0128-7451

Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Ghaffar, Alia (2019) Satellite attitude tracking control using Lyapunov control theory. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 253-257. ISSN 2277-3878

Omar, Mohamad Firdaus and Mohamad, Nuriah and Azmi, Azlin Suhaida and Ali, Fathilah (2019) Properties of sulphur in colloidal system: a review. Biological and Natural Resources Engineering Journal (BNREJ), 2 (2). pp. 13-20. E-ISSN 2637-0719

Omar, Nurihan and Aminanda, Yulfian and Mohamed Ali, Jaafar Syed and A. Rasid, Zainudin and Yahaya, Hafizal (2019) The impact behaviour of carbon fiber-epoxy composite leading edge using finite element method. International Journal of Recent Technology and Engineering, 8 (2). pp. 2617-2622. ISSN 2277-3878

Othman, Maizatulnisa and Rashid, Haziq and Jamal, Nur Ayuni Jamal and Shaharuddin, Sharifah Imihezri and Sulaiman, Sarina and Hairil, H. Saffiyah and Khalid, Khalisanni and Zakaria, Nazarudin (2019) Effect of cinnamon extraction oil (CEO) for algae biofilm shelf-life prolongation. Polymers, 11 (1). pp. 1-10. ISSN 2073-4360

P

Paijan, Lailatul Harina and Maleque, Md. Abdul (2019) A new approach for composite coating development on duplex stainless steel (DSS). In: Kulliyyah Of Engineering Research, Innovation And Commercialisation Exhibition (KERICE) 2019, 18 September 2019, Gombak, Kuala Lumpur. (Unpublished)

Parman, Adibah and Mat Isa, Mohd Noor and Ben Belgacem, Farah Fadwa and Noorbatcha, Ibrahim Ali and Mohd. Salleh, Hamzah (2019) Comparative metagenomics analysis of palm oil mill effluent (POME) using three different bioinformatics pipelines. IIUM Engineering Journal, 20 (1). pp. 1-11. ISSN 1511-788X E-ISSN 2289-7860

Pathan, Khizar Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Influence of expansion level on base pressure and reattachment length. CFD Letters, 11 (5). pp. 22-36. ISSN 2180-1363

Pathan, Khizar Ahmed and Syed, Ashfaq and Dabeer, Prakash S and Khan, Sher Afghan (2019) Analysis of parameters affecting thrust and base pressure in suddenly expanded flow from nozzle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (1). pp. 1-18. ISSN 2289-7879

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Effect of nozzle pressure ratio and control jets location to control base pressure in suddenly expanded flows. Journal of Applied Fluid Mechanics, 12 (4). pp. 1127-1135. ISSN 1735-3572 E-ISSN 1735-3645

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Investigation of base pressure variations in internal and external suddenly expanded flows using CFD analysis. CFD Letters, 11 (4). pp. 32-40. ISSN 2180-1363

Pesek, Petr and Zvanovec, Stanislav and Chvojka, Petr and Ghassemlooy, Zabih and Mohd Nor, Norhanis Aida and Tabeshmehr, Pooria (2019) Experimental validation of indoor relay-assisted visible light communications for a last-meter access network. Optics Communications, 451. pp. 319-322. ISSN 0030-4018

Prabowo, Herry Agung and Adesta, Erry Yulian Triblas (2019) A study of Total Productive Maintenance (TPM) and lean manufacturing tools and their impact on manufacturing performance. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 39-43. ISSN 2277-3878

Putra Jaya, Ramadhansyah and Masri, Khairil Azman and Awang, Haryati and Ali, Mohamad Idris and Ramli, Noram Irwan and Wan Azahar, Wan Nur Aifa and Shaffie, Ekarizan and Yaacob, Haryati and Mohd Warid, Muhammad Naqiuddin and Ramli, Ichwana (2019) Stability and stiffness of asphaltic concrete incorporating waste cooking oil. International Journal of Recent Technology and Engineering (IJRTE), 7 (6). pp. 16-19. ISSN 2277-3878

R

Radin Umar, Radin Zaid and Ahmad, Nadiah and Halim, Isa and Lee, Poh Yan and Abdul Hamid, Abd. Malek (2019) Design and development of an ergonomic trolley-lifter for sheet metal handling task: a preliminary study. Safety and Health at Work, 10 (3). pp. 327-335. ISSN 2093-7911 E-ISSN 2093-7997

Radin Umar, Radin Zaid and Ling, Chaifong and Abdullasim, Nazreen and Ahmad, Nadiah and Halim, Isa and Abdul Hamid, Abd. Malek (2019) Occupational wrist postural assessment and monitoring system: development and initial validation. Journal of Engineering Science and Technology, 14 (6). pp. 3421-3436. ISSN 1823-4690

Rafia, Afroz and Rahman, Mohammed Ataur and Muhib, Md. Muhibbullah and Morshed, Niaz (2019) Malaysian automobile industry and green supply chain management. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 158-162. ISSN 2277-3878

Rahayu, I D and Widodo, W and Prihartini, Indah and Winaya, Aris and Zalizar, Lili and Untari, Tri and Mel, Maizirwan (2019) The potential of an extract of Zingiber zerumbet (L.) Smith as a feed additive to improve the production performances and meat nutritional composition of broiler chickens. IOP Conference Series: Earth and Environmental Science, 293. pp. 1-7. ISSN 1755-1307 E-ISSN 1755-1315

Rahman, Mohammed Ataur and Hassan, Nurul and Jaffar, Abdul Hassan and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2019) Study on the development of electromagnetic two speed gearbox for EV. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 147-152. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Mohammed Ataur and Jaafar, Abdul Hassan (2019) Development of rapid charging system for EV battery. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 292-297. ISSN 2277-3878

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Md Daud, Badrul (2019) Electromagnetic contactless torque transducer: torque measurement and shaft impediment approach. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 298-303. ISSN 2277-3878

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Sakif, Ahsan (2019) Development of electro-hydro automatic parking braking system for automotive system. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 264-269. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Mohammed Ataur and Sany, Ihsan and Rashid, Muhammad Mahbubur and Ismail, Ahmad Faris (2019) Prototype of electromagnetic actuator for continuously variable transmission for passenger car. Research Report. UNSPECIFIED. (Unpublished)

Rahman, Muhammad Ariff Azizul and Gunawan, Teddy Surya and Kartiwi, Mira (2019) Herb leaves pattern recognition using digital microscope and deep learning. In: International Conference on Universal Wellbeing (ICUW2019), 4 - 6 Dec 2019, Kuala Lumpur, Malaysia.

Rahman, Tariq Md Ridwanur and Asrar, Waqar and Khan, Sher Afghan (2019) An Investigation of RANS simulations for swirl-stabilized isothermal turbulent flow in a gas turbine burner. CFD Letters, 11 (9). pp. 14-31. ISSN 2180-1363 E-ISSN 2180-1363

Rahman, Tawfikur and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Alam, A. H. M. Zahirul (2019) PLL-based 3φ inverter circuit for microgrid system operated by electrostatic generator. IIUM Engineering Journal, 20 (1). pp. 177-193. ISSN 1511-758X E-ISSN 2289-7860

Rahman, Tawfikur and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Zahirul Alam, A. H. M. (2019) Design and implementation of a series switching SPSI for PV cell to use in carrier based grid synchronous system. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 349-366. ISSN 2089-3191 E-ISSN 2302-9285

Rakhimov, Abdumalik and Saydatomov, Erkin and Sheraliev, Shuhrat (2019) On the Riesz summability of the eigenfunction expansions on a closed domain. Filomat, 33 (16). pp. 5199-5205. E-ISSN 2406-0933

Ramlan, Amir Hakimi and Sirat, Mohd Shukri and Ismail, Edhuan and Buys, Yose Fachmi and Purwanto, Hadi and Mohd Mustafah, Yasir and Md Din, Muhammad Faiz and Ani, Mohd Hanafi (2019) Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Ramli, Ahmad Bukhari and Kasim, Norhidayu and Ismail, Norfarah Nadia and Ibrahim, Saerahany Legori and Md Husain, Nadiah and Wan Azahar, Wan Nur Aifa (2019) Determination of soil bearing capacity and profile using CAP-SASW method at Western Malaysian Peninsular. In: Proceedings of AICCE’19. Lecture Notes in Civil Engineering (53). Springer Nature, pp. 855-867. ISBN 978-3-030-32815-3

Rasdi, Muhammad Hannan Fathi and Nik Hashim, Nik Nur Wahidah and Hanizam, Syahirah (2019) Around view monitoring system with motion estimation in ADAS application. In: 7th International Conference on Mechatronics Engineering, ICOM 2019, 30 - 31 Oct 2019, Putrajaya.

Rashed, Almutairi Saleh and Faris, Waleed Fekry and Fatai, Sado (2019) Fuzzy based obstacle avoidance system for autonomous mobile robot. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Rashed, Almutairi Saleh and Faris, Waleed Fekry and Fatai, Sado (2019) Fuzzy-based collision avoidance system for autonomous driving in complicated traffic scenarios. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Rashid, Muhammad Mahbubur and Embong, Abd Halim and Hazim, Azizi and Nayen, MD. Julkar and Roy, Rupal (2019) Autonomous boat for underwater surveillance. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 203-209. ISSN 2277-3878

Rashid, Muhammad Mahbubur and Mokhtaruddin, Nadhirah and Nayen, Md. Julkar (2019) Development of a glucose sensor system with real time calibration. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 216-218. ISSN 2277-3878

Rassa, E. H.R. and Mohd. Ramli, Huda Adibah and Azman, Amelia Wong (2019) Analysis on the impact of outdated channel quality information (CQI) correction techniques on real-time quality of service (QoS). In: 16th IEEE Student Conference on Research and Development, SCOReD 2018, 26 - 28 November 2018, Selangor, Malaysia.

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2019) Cancer relapse prediction from microrna expression data using machine learning. Journal of Mechanics of Continua and Mathematical Sciences, Special Issue (1). pp. 365-373. ISSN 0973-8975 E-ISSN 2454-7190

Rehman, Fazal ur and Khan, Qudrat and Akmeliawati, Rini (2019) Synchronization and antisynchronization protocol design of chaotic nonlinear gyros: an adaptive integral sliding mode approach. Turkish Journal of Electrical Engineering & Computer Sciences, 27 (1). pp. 675-684. ISSN 1300-0632 E-ISSN 1303-6203

Renita, Sharon Monis and Crasta, Asha and Khan, Sher Afghan (2019) Evaluation of stiffness derivative for a delta wing with straight leading edges in unsteady flow. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 754-762. ISSN 2249 – 8958

Revichandran, Rajeanderan and Mohiuddin, A. K. M. (2019) Two-phase thermosyphon filled with R410A refrigerant operating at low evaporator temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 9-20. ISSN 2289-7879

Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Experimental investigation of straight shape thermosyphon filled with R410A refrigerant. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 271-278. ISSN 2088-5334 E-ISSN 2460-6952

Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Factors affecting thermosyphon performance- A review of studies. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 124-133. ISSN 2277-3878

Roeswitawati, Dyah and Huda, M and Indratmi, D and Mel, Maizirwan (2019) Effectiveness of the use of organic waste as fertilizer and physical scarification of seeds on growth of seeds nila plants (Indigofera sp.). IOP Conference Series: Earth and Environmental Science, 293. pp. 1-7. ISSN 1755-1307 E-ISSN 1755-1315

Roslan, Alida and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani (2019) Comparison of zirconia toughened alumina fracture toughness obtained from Vickers indentation by applying various equations. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

Roslan, M. Ridzuan and Ahmad Zabidi, Suriza (2019) Community reporting system: road violation. Bulletin of Electrical Engineering and Informatics.

Roslan, M.Ridzuan and Ahmad Zabidi, Suriza (2019) Design of an application for community reporting system. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018, 19th-20th September 2018, International Islamic University Malaysia (IIUM), Gombak, Kuala Lumpur Kulliyyah Engineering, International Islamic University Malaysia (IIUM).

Rosli, Rafhanah Shazwani and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2019) On the analysis of received signal strength indicator from ESP8266. Bulletin of Electrical Engineering and Informatics (BEEI), 8 (3). pp. 933-940. ISSN 2089-3191 E-ISSN 2302-9285

Rozhan, Alya Naili and Hairin, Assayidatul Laila Nor and Mohd. Salleh, Hamzah and Purwanto, Hadi (2019) Mechanism of carbon deposition within char derived from oil palm empty fruit bunch. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

Rusdi, K.N. and Hisyam, Mohamad Badrol and Mohd Rusdi, Muhammad Farid and Zulkipli, Nur F. and Abdul Latiff, Anas and Harun, Sulaiman Wadi and Saidin, Norazlina (2019) Samarium (III) oxide thin film as a saturable absorber for the passively Q-switched Tm-doped fiber laser. In: Photonics Meeting 2019, The 2nd Annual Conference and Workshop, 8 - 9 July 2019, Dungun, Terengganu.

Ruslam, Muhammad U.H. and Ridhuan Sirad, Fadly Jashi Darsivan (2019) Parametric study of ground vehicle suspension system. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 284-287. E-ISSN 2277-3878

Rusli, Farah Zulyana and Ridhuan Siradj, Fadly Jashi Darsivan (2019) The effect of hydraulic damper characteristics on the ride and handling of ground vehicle. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 113-118. ISSN 0277-3878

Rusli, Nazreen and Md Yusof, Hazlina and Sidek, Shahrul Na'im and Ishak, Nor Izzati (2019) GLCM correlation approach for blood vessel identification in thermal image. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2018), 3rd-6th December 2018, Kuching, Sarawak.

S

S, Parashurama and Saleel, C. Ahmed and M. S., Govindegowda and Khan, Sher Afghan (2019) Hydrocarbons as alternative refrigerants in domestic refrigerators. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3). pp. 496-501. ISSN 2278-3075

Sabri, Fatin Nadia and Mohamad Hanif, Noor Hazrin Hany and Janin, Zuriati (2019) Precision crop management for indoor farming. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

Sahari, J. and Maleque, Md. Abdul and Sapuan, S. M. (2019) Sugar palm starch biopolymer: extraction and processing. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 41-55. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Jumaidin, R. (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 57-70. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Suriani, M.J. and YUsriah, L. (2019) Review of development and characterization of sugar palm fiber–reinforced polymer composites. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 15-40. ISBN 978-1-4987-5302-9

Saidin, Norazlina and Idris, Nur Farahi and Yaacob, Mohd Hanif and Harun, Sulaiman Wadi and Md Ralib @ Md Raghib, Aliza 'Aini and Hasbullah, Nurul Fadzlin (2019) Single-mode fiber coated with zinc oxide (ZnO) nanorods for H gas sensor applications. In: 2019 IEEE International Conference on Sensors and Nanotechnology, 24 - 25 July 2019, Penang Island.

Saleh, Tanveer and Bahar, Rubina (2019) Near net shape machining by Micro-EDM and Micro-WEDM. In: Micro-electrical Discharge Machining Processes Technologies and Applications. Springer, Singapore, pp. 231-264. ISBN 978-981-13-3073-5

Saleh, Tanveer and Khan, Md. Raisuddin (2019) Hexapod robot for autonomous machining. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Salim, Sohail and Khalifa, Othman Omran and Abdul Rahman, Farah and Lajis, Adidah (2019) Crowd detection and tracking in surveillance video sequences. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

Samat, Noorasikin and Sharifuddin, N and M.I, Shafiee (2019) Reprocessing of polypropylene/cellulose composites: effects on thermal properties. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2019), 30th-31st October 2019, Putrajaya. (Unpublished)

Samsudin, Amirah and Azmi, Azlin Suhaida and Mohd Nawi, Mohd Nazri and Abdul Halim, Amanatuzzakiah (2019) Nutrients and chemical oxygen demand (COD) removals by microalgae - bacteria co-culture system in palm oil mill effluent (POME). IIUM Engineering Journal, 20 (2). pp. 22-31. ISSN 1511-758X E-ISSN 2289-7860

Samsudin, Nur Shazweena and Kabbashi, Nassereldeen Ahmed and Jami, Mohammed Saedi (2019) Selection of various coagulants for sugar industry wastewater treatment. Biological and Natural Resources Engineering Journal, 2 (1). pp. 1-9. E-ISSN 2637-0719

Sarkar, Md. Rasel and Julai, Sabariah and Chong, Wen Tong and Toha @ Tohara, Siti Fauziah (2019) Effectiveness of nature-inspired algorithms using ANFIS for blade design optimization and wind turbine efficiency. Symmetry, 11 (4). pp. 1-20. ISSN 2073-8994

Seprianto, Dicky and ., Iskandar and R., Wilza and Adesta, Erry Yulian Triblas (2019) Influence of internal fill pattern, polishing time and Z-Axis orientation on the tensile strength of the 3D printed part. International Journal of Recent Technology and Engineering, 7 (6). pp. 170-174. ISSN 2277-3878

Sethuraman, Vigneshvaran and Rajendran, Parvathy and Khan, Sher Afghan (2019) A cost-effective data acquisition instrumentation for measurement of base pressure and wall pressure in suddenly expanded flow through ducts. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (1). pp. 112-123. E-ISSN 2289-7879

Setyobud, Roy Hendroko and Zalizar, Lili and Wahono, Satriyo Krido and Widodo, Wahyu and Wahyudi, Ahmad and Mel, Maizirwan and Prabowo, Bayu and Jani, Yahya and Nugroho, Yogo Adhi and Liwang, Tony and Zaebudin, A (2019) Prospect of Fe non-heme on coffee flour made from solid coffee waste: Mini review. IOP Conference Series: Earth and Environmental Science, 293. pp. 1-25. ISSN 1755-1307 E-ISSN 1755-1315

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) Damping derivative evaluation in pitch for an ogive at high mach numbers. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). pp. 1307-1317. E-ISSN 2278-3075

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) Estimation of stiffness derivative of an ogive for specific heat ratio 1.666. Test Engineering and Management, 81 (11-12). pp. 5091-5100. ISSN 0193-4120

Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Ahmed, Syed Faiz and Shahid, Zeeshan and Khan, Talha Ahmed (2019) High-gain rectangular-fins shaped balanced antipodal vivaldi antenna array extended by dielectric for wide-band imaging application. In: 2019 IEEE International Conference on Innovative Research and Development (ICIRD), 28th-30th June 2019, Jakarta, Indonesia.

Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Baillargeat, Dominique and Habaebi, Mohamed Hadi and Yaacob, Mashkuri and Shah, Jawad Ali and Shahid, Zeeshan (2019) Design and parametric evaluation of UWB antenna for array arrangement. Bulletin of Electrial Engineering and Informatics, 8 (2). pp. 644-652. ISSN 2089-3191 E-ISSN 2302-9285

Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Habaebi, Mohamed Hadi and Baillargeat, Dominique and Kadir, Kushsairy Abdul and Shah, Jawad Ali and Shahid, Zeeshan and Yahya, Muhammad (2019) UWB antenna based time-domain approach for through the walls gap estimation. In: 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2019), 20th-23rd May 2019, Auckland, New Zealand.

Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Shahid, Zeeshan and Khan, Talha Ahmed (2019) Design and comparative validation of antipodal vivaldi antenna using periodic elliptical-slots with extended triangular-shaped as dielectric lens for microwave imaging applications. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27th-29th August 2019, Kuala Lumpur, Malaysia.

Shariff, Nur Amirah and Sidek, Khairul Azami and A. Zainudin, Nur Najihah and Abd Malik, Noreha (2019) Development of lie detector using photoplethysmogram signal. In: Lecture Notes on Advanced Research in Engineering and Information Technology II. Malaysia Technical Scientist Association, Ayer Keroh, Melaka, pp. 91-97.

Sharmin, Afsah and Anwar, Farhat and Motakabber, S. M. A. (2019) Energy-efficient scalable routing protocol based on ACO for WSNS. In: 7th IEEE International Conference on Mechatronics Engineering - ICOM'19, 30th-31st October 2019, Putrajaya.

Sharmin, Afsah and Anwar, Farhat and Motakabber, S. M. A. (2019) A novel bio-inspired routing algorithm based on ACO for WSNs. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 718-728. ISSN 2089-3191 E-ISSN 2302-9285

Shohibuddin, Ihda Uswatun Shalihah and Wan Salim, Wan Wardatul Amani (2019) Thermodynamics and kinetics of electron transfer between electrolyte and nanocomposite modified electrode for sensor application (work in progress). In: IIUM Kuantan Research Day 2019, 19th October 2019, Kuantan, Pahang. (Unpublished)

Shuriye, Abdi Omar (2019) INHART Ibadah Camp 2018. In: INHART Ibadah Camp 2018, 19th October 2018, Kuala Lumpur. (Unpublished)

Siddiqi, Mohammad Umar and Gulhane, P. Nitin and Khan, Sher Afghan and Taler, Jan and Cebula, Arthur and Oclon, Pawel and Patil, Rajesh (2019) Numerical investigation of semiempirical relations representing the local Nusselt number magnitude of a pin fin heat sink. Heat Transfer—Asian Research, 48 (5). pp. 1857-1888. ISSN 1099-2871 E-ISSN 1523-1496

Siddique, Mohd Umair and Gulhane, N P and Al-Robaian, Abdul Rehman A and Khan, Sher Afghan (2019) On numerical investigation of semi-empirical relations representing local nusselt number at lower nozzle-target spacing’s. International Journal of Engineering, 32 (1). pp. 137-145. ISSN 1025-2495 E-ISSN 1735-9244

Siddique, Mohd Umair and Khan, Sher Afghan and Al-Robaian, Abdulrahman and Ansari, Eman (2019) Numerical study of heat transfer augmentation using pulse jet impinging on Pin Fin heat sink. CFD letters, 11 (3). pp. 84-91. ISSN 2180-1363

Sidek, Khairul Azami and Haron, Nur Syamim Izzatie and Mansor, Hasmah (2019) Development of fatigue detection technique using photoplethysmogram signal. In: Lecture Notes on Advanced Research in Engineering and Information Technology II. Malaysia Technical Scientist Association, Ayer Keroh, Melaka, pp. 106-113.

Sinaga, Nazaruddin and Mel, Maizirwan and Purba, D.W.I. and Syaiful, S. and , Paridawati (2019) Comparative study of the performance and economic value of a small engine fueled with B20 and B20-LPG as an effort to reduce the operating cost of diesel engines in remote areas. IOP Conference Series: Materials Science and Engineering, 598 (1). pp. 1-9. ISSN 1757-8981 E-ISSN 1757-899X

Sirat, Mohd Shukri and Ismail, Edhuan and Ramlan, Amir Hakimi and Fauzi, Fatin Bazilah and Yaacob, Iskandar Idris and Mohamed, Mohd Ambri and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2019) Influence of surface energy and elastic strain energy on the graphene growth in chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Sofian, Anis Sofia and Samat, Noorasikin and Meor Sulaiman, Meor Yusoff and Paulus, Wilfred (2019) Alumina recovery from industrial waste: study on the thermal, tensile and wear properties of polypropylene/alumina nanocomposites. International Journal of Precision Engineering and Manufacturing-Green Technology, 7 (1). pp. 163-172. ISSN 2288-6206 E-ISSN 2198-0810

Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Hilmy, Irfan and Badran, Marwan A A (2019) Convergence and error analysis of a bi-quadratic triangular galerkin finite element model for heat conduction simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 78-86. ISSN 2289-7879

Sulaiman, Sarina and Abdul Jamaludin, Nor Fatin and Kabbashi, Nassereldeen Ahmed (2019) Development of CaO/PVA catalyst from fish bone for biodiesel production. Bulletin of Chemical Reaction Engineering & Catalysis, 14 (1). pp. 153-157. ISSN 1978-2993

Sulaiman, Sarina and Restu, I. A. (2019) Aluminum foil waste as catalyst for esterification of waste cooking oil. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, online first. pp. 1-9. E-ISSN 1556-7230

Suliman, M.M. Ali and Omar, Ashraf A. and Faris, Waleed Fekry and Ismail, Ahmad Faris and Mohamed Ali, Jaffar Syed (2019) Aerodynamics of a circular planform wing. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Suliman, S.H. and Hashim, Wahidah and Ismail, Ahmad Fadzil and Yahya, A.S. and Khairolanuar, Muhamad Haziq and Sauti,, Mohd Suhaimi (2019) Wireless connectivity predicaments in gsm-based amr system : an empirical research. International Journal of Recent Technology and Engineering, 82 (2 Special Issue 11). pp. 3474-3477. E-ISSN 2277-3878

Sutjipto, Agus Geter Edy and Hisyam, Anwaruddin and Salim, Nurjannah and Ab Rahim, Mohd Hasbi and Legowo, Ari and Ani, Mohd Hanafi (2019) Development of inert ceramic for industrial application based on ternary phase diagram of potassiun oxide-aluminum oxide-silicon dioxide. In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), 26 Mar - 10 Apr 2019, Dubai, United Arab Emirates.

Syed Abdul Azziz, Saripah Salbiah and Mukhtar, Mat Ropi and A. Hadi, A. Hamid and Mhd Bakri, Yuhanis and Aldulaimi, Ahmed Kareem Obaid and Awang, Khalijah and Hashim, Yumi Zuhanis Has-Yun (2019) Alkaloids from Popowia perakensis King and their potential as Dipeptidyl peptidase IV (DPP IV) inhibitors. Research Journal of Pharmacy and Technology, 12 (1). pp. 113-116. ISSN 0974-3618 E-ISSN 0974-360X

Syed Abdullah, Sharifah Sakeenah and Khalifa, Othman Omran and Abdul Rahman, Farah and Nasir, Haidawati (2019) Performance evaluation on error probabilities of coded BPSK system using the Linear (23, 12) Golay code with hard-decision decoding. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

Syed Mohamed Ali, Jaffar and M. Saleh, Mubin (2019) Experimental and numerical study on the aerodynamics and stability characteristics of a canard aircraft. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 165-174. ISSN 2289-7879

Syed Mohamed Ali, Jaffar and Mahmood, Munir Mohamed and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Shape control of composite plates with piezoelectric actuators. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 219-223. ISSN 2277-3878

Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali and Nasikin, Mohd Faiz Diuzzaman (2019) Numerical and experimental study on the effect of cab- extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 61-68. ISSN 2289-7879

Syed Shaharuddin, Sharifah Imihezri and Mukhtar, Abdul Rahman and Mohd. Akhir, Nur Atiqah and Shaffiar, Norhashimah and Othman, Maizatulnisa (2019) Experimental and finite element analysis of solvent cast poly (lactic acid) thin film blends. IIUM Engineering Journal, 20 (2). pp. 197-210. ISSN 1511-758X E-ISSN 2289-7860

T

Tanbin, Suriyea and Ogu Salim, Nurhainis and Ahmad Fuad, Fazia Adyani (2019) Identifying analogues of 2-deoxyglucose, alpha-d-glucose and beta-d-glucose-6-phosphate as potential inhibitors of human hexokinase ii for the development of anti-dengue therapeutics. Pertanika Journal of Science and Technology, 27 (4). pp. 1625-1647. ISSN 0128-7680

Ten, S.T. and U, Hashim and Nordin, Anis Nurashikin and Gopinath, Subash C.B. and Liu, W.W. and Foo, K.L. and Sam, Sung Ting and Rahman, S.F.A and Chun, Hong Voon and MN, M. Nuzaihan (2019) Recognition of bacterial DNA on SAW-based biosensors. In: Nanobiosensors for biomolecular targeting. Elsevier, Netherlands, pp. 117-140. ISBN 978-0-12-813900-4

Tengku Azmi, Tengku Muhammad Afif and Sulaiman, Nadzril (2019) Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: 5th International Conference on Computational Science and Technology (ICCST 2018), 29th-30th August 2018, Kota Kinabalu, Sabah.

U

Ul Islam Mattoo, Mohd Mueen and Mohd. Ramli, Huda Adibah (2019) A study of packet scheduling algorithms in long term evolution-advanced. Indonesian Journal of Electrical Engineering and Computer Science, 18 (1). pp. 516-524. ISSN 2502-4752 E-ISSN 2502-4760

Umair, Siddiqui and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2019) On numerical investigation of nusselt distribution profile of heat sink using lateral impingement of air jet. CFD Letters, 11 (9). pp. 59-68. ISSN 2180-1363

Uwaechia, Anthony Ngozichukwuka and Mahyuddin, Nor Muzlifah and Mohd Fadzil, Ain and Abdul) Latiff, Nurul Muazzah and Za'bah, Nor Farahidah (2019) On the spectra efficiency of low-complexity and resolution hybrid precoding and combining transceivers for mmWave MIMO systems. IEEE Access, 7. pp. 109259-109277. E-ISSN 2169-3536

W

Wahjudi, Mariana and Kurniawan, W D and Gultom, M T and Artadana, Ida Bagus Made and Mohamad Puad, Noor Illi (2019) Inhibition of Burkholderia cenocepacia H111 quorum sensing system by environmental bacterial isolates. IOP Conference Series: Earth and Environmental Science, 293. pp. 1-9. ISSN 1755-1307 E-ISSN 1755-1315

Wan Azahar, Wan Nur Aifa and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Mohd Hasan, Mohd Rosli and Shaffie, Ekarizan (2019) X-ray diffraction analysis of bitumen containing untreated and treated waste cooking oil. International Journal of Recent Technology and Engineering (IJRTE), 8 (3S3). pp. 434-437. ISSN 2277-3878

Wan Azhar, Wan Ahmad and Saleh, Tanveer (2019) Development and performance evaluation of modular RC-based power supply for micro-EDM. In: 7th IEEE International Conference on Mechatronics Engineering - ICOM'19, 30th-31st October 2019, Putrajaya. (In Press)

Wan Nawawi, Wan Mohd Fazli and Jones, Mitchell and Murphy, Richard J and Lee, Koon-Yang and Kontturi, Eero and Bismarck, Alexander (2019) Nanomaterials Derived from Fungal Sources - Is It the New Hype? Biomacromolecules. pp. 1-26. ISSN 1525-7797 E-ISSN 1526-4602 (In Press)

Wan Nawawi, Wan Mohd Fazli and Lee, Koon-Yang and Kontturi, Eero and Murphy, Richard J and Bismarck, Alexander (2019) Chitin nanopaper from mushroom extract: natural composite of nanofibers and glucan from a single biobased source. ACS Sustainable Chemistry and Engineering, 7 (7). pp. 6492-6496. ISSN 2168-0485

Wan Nordin, Mimi Aminah and Vedenyapin, Dmitry and Alghifari, Muhammad Fahreza and Gunawan, Teddy Surya (2019) The disruptometer: an artificial intelligence algorithm for market insights. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 727-734. ISSN 2302-9285 E-ISSN 2302-9285

Wan Salim, Wan Wardatul Amani (2019) Biosensors for water quality monitoring. In: Gender Summit 16 – Asia Pacific "Diversity and Gender in Science: Enhancing the Value of Research and Innovation”, 28th-29th August 2019, Biopolis, Singapore. (Unpublished)

Wan Salim, Wan Wardatul Amani (2019) My experience leading NASA SporeSat : a lab on chip device for single-cell study. In: 2nd Annual Women in Engineering Conference 2019: Breaking the Boundaries, 20th-21st August, 2019, Kuala Lumpur. (Unpublished)

Wan Salim, Wan Wardatul Amani (2019) My experience leading NASA SporeSat: a lab-on-chip device for single-cell study. In: Minggu Sains Negara Fasa 2 Peringkat Negeri Melaka, 15th -17thAugust 2019, Ayer Keroh, Melaka. (Unpublished)

Wan Salim, Wan Wardatul Amani and Shohibuddin, Ihda Uswatun Shalihah (2019) Characterisation of electrochemical transducers for biosensor applications. In: 8th International Conference on Science and Mathematics Education (CoSMED 2019), 11th- 15th November 2019, Penang. (Unpublished)

Wan Yahya, M.Z. and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Warimani, Mohammad Salman (2019) Modelling of a three-shaft high-bypass-ratio engine performance and emission prediction using hydrogen fuels. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3). pp. 484-490. ISSN 2278-3075

Warimani, Mahammad Salaman and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Investigation of aircraft engine performance utilizing various alternative fuels. In: Southeast Asia Workshop on Aerospace Engineering (SAWAE 2019), 29 - 30 Aug 2019, Kuala Lumpur.

Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Study of feasibility of pulse detonation engine powered by alternative fuels. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 291-296. ISSN 2249–8958

Warimani, Mohammadsalman and Azami, Muhammad Hanafi and Khan, Sher Afghan (2019) Challenges and solutions for using liquid fuels in aviation industry. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2s2). pp. 288-290. ISSN 2249–8958

Warsi, Arif and Abdullah, Munaisyah and Husen, Mohd Nizam and Yahya, Muhammad and Khan, Sheroz and Jawaid, Nasreen (2019) Gun detection system using Yolov3. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27 - 29 Aug 2019, Kuala Lumpur, Malaysia.

Wilza, R. and ., Iskandar and Seprianto, Dicky and Adesta, Erry Yulian Triblas (2019) Optimization of parameters in three dimensional printing objects with fused deposition modeling technology against geometry accuracy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 175-179. ISSN 2277-3878

Y

Yaakob, A. M. and Toha, Siti Fauziah and Kadir, M. A. and Mohd Yusof, Muhammad Syafiq (2019) Design and development of automatic inner mirror endurance test system. International Journal of Recent Technology and Engineering, 7 (6). pp. 185-190. ISSN 2277-3878

Yahya, Muhammad and Shah, Jawad Ali and Abdul Kadir, Kushsairy and Mohd Yusof, Zulkhairi and Khan, Sheroz and Warsi, Arif (2019) Motion capture sensing techniques used in human upper limb motion: a review. Sensor Review. pp. 1-9. ISSN 0260-2288

Yang, Huiying and Gözaydın, Gökalp and Nasaruddin, Ricca Rahman and Har, Jie Ren Gerald and Xi, Chen and Wang, Xiaonan and Yan, Ning (2019) Toward the shell biorefinery: processing crustacean shell waste using hot water and carbonic acid. ACS Sustainable Chemistry & Engineering, 7. pp. 5532-5542. ISSN 2168-0485

Yosri, Muhammad Hafizan and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati (2019) Application of air ionizer to remove electrostatic discharge (ESD) dust for plastics material in automotive painting process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (1). pp. 29-37. ISSN 2289-7879

Yosri, Muhammad Hafizan and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati (2019) Evaluation of air flow pattern for conceptual design of automotive painting line using Computational Fluid Dynamic (CFD) for better dust particle reduction. CFD Letters, 11 (2). pp. 42-49. ISSN 2180-1363

Yusof, Nurlina and Jaswir, Irwandi and Jamal, Parveen and Jami, Mohammed Saedi (2019) Texture Profile Analysis (TPA) of the jelly dessert prepared from halal gelatin extracted using High Pressure Processing (HPP). Malaysian Journal of Fundamental and Applied Sciences, 15 (4 (July-August)). pp. 604-608. ISSN 2289-5981 E-ISSN 2289-599X

Yusoff, Siti Hajar and Mahat, Sazali and Midi, Nur Shahida and Mohamad, Sarah Yasmin and Zaini, Syasya Azra (2019) Classification of different types of metal from recyclable household waste for automatic waste separation system. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 490-500. ISSN 2089-3191 E-ISSN 2302-9285

Z

Zahangir, Musanna and Ibrahim, Siti Noorjannah and Abdul Rani, Nabila Syafiqa and Abdul Malik, Noreha (2019) Single particle movement analysis in a continuous flow fluid with magnetophoresis effect. In: 2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 21 - 23 Aug 2019, Genting Highland, Pahang.

Zainal, Nur Aishah and Habaebi, Mohamed Hadi and Chowdhury, Israth Jahan and Islam, Md. Rafiqul and Daoud, Jamal Ibrahim (2019) Gateway sink placement for sensor node grid distribution in LoRa smart city networks. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 834-842. ISSN 2502-4752

Zainuddin, Ahmad Anwar and Nordin, Anis Nurashikin and Asri, Mohd Afiq and Ab Rahim, Rosminazuin and Guines, Cyril and Chatras, Matthieu and Pothier, Arnaud and Mak, Wing Cheung (2019) Development of integrated electrochemical-quartz crystal microbalance biosensor arrays: towards ultrasensitive, multiplexed and rapid point-of-care dengue detection. In: 12th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2019, 22 - 24 February 2019, Prague; Czech Republic.

Zainurin, Nur Aimi Aliah and Hashim, Yumi Zuhanis Has-Yun and Mohamed Azmin, Nor Fadhillah and Al-Khatib, Maan Fahmi Rashid (2019) GCMS-based profiling revealed bioactive compounds from Aquilaria malaccensis leaf extract. In: Global Halal Sphere Conference 2019 (GloHaS 2019), 21st-22nd August 2019, Kuala Lumpur, Malaysia. (Unpublished)

Zakaria, Khairun Najwa and Amid, Azura and Zakaria, Zubaidah and Jamal, Parveen and Ismail, Azli (2019) Anti-proliferative activity of triterpenes isolated from Clinicanthus nutans on Hep-G2 liver cancer cells. Asian Pacific Journal of Cancer Prevention, 20 (2). pp. 563-567. ISSN 1513-7368

Zakaria, Mushab and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Ahmad Rashidi, Syazwan and Mat Sah, Mohd Azizi (2019) Spring back of thick curved uni-directional carbon fibre reinforced composite laminate for aircraft structure application. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 224-228. ISSN 2277-3878

Zuikafly, Siti Nur Fatin and Wan Nawawi, Wan Mohd Fazli and Ngee, Lim Hong and Yahaya, Hafizal and Yahya, W. J. and Ahmad, Faizah (2019) Graphene in chitin based passive Q-switcher. In: Photonics Meeting 2019, The 2nd Annual Conference and Workshop, 8 - 9 July 2019, Dungun, Terengganu.

Zulkepli, I.I. and Mokhtar, Hanan and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim and Mohamed Rehan, Muhammad Saifuddin (2019) Review of manufacturing process for good quality of composite assessment. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

This list was generated on Wed Aug 12 10:52:56 2020 +08.