Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2018

Aabid, Abdul and Hrairi, Meftah and Mohamed Ali, Jaffar Syed and Abuzaid, Ahmed (2018) Stress concentration analysis of a composite patch on a hole in an isotropic plate. International Journal of Mechanical and Production Engineering Research and Development, 2018 (Special Issue). pp. 249-255. ISSN 2249-6890 E-ISSN 2249-8001

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Modeling different repair configurations of an aluminum plate with a hole. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2018) Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development, Special issue. pp. 238-243. ISSN 2249-6890 E-ISSN 2249-8001

Aabid, Abdul and Khan, Sher Afghan (2018) Design and fabrication of flying saucer utilizing coanda effect. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Aabid, Abdul and Khan, Sher Afghan (2018) Optimization of heat transfer on thermal barrier coated gas turbine blade. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 -22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Ab Rahim, Abdul Hakim and Ramli, Nabilah and Nordin, Anis Nurashikin (2018) Fabrication and characterization of supercapacitor with activated carbon electrode and NaOH electrolyte. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, 19th-20th September 2018, Gombak, Kuala Lumpur.

Ab Rahim, Abdul Hakim and Ramli, Nabilah and Nordin, Anis Nurashikin and Othman, Raihan and Asrar, Waqar and Sulaeman, Erwin (2018) Classical equivalent circuit characterization for a double-layer capacitor. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017, 28th-30th November 2017, Putrajaya.

Abdul Hamid, Ahmad Hussein and Mahmud, Jamaluddin and Noh, Mohd Hafiz and Mohammed Sapardi, Mohd Azan (2018) Wake modifications in confined flows due to the presence of a downstream cylinder in staggered arrangement. International Journal of Engineering and Technology(UAE), 7 (4). pp. 132-136. ISSN 2227-524X

Abdul Kadir, Nurdina and Aminanda, Yulfian and Shaikh Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2018) Experimental study of low-velocity impact on foam-filled kraft paper honeycomb structure. In: "International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)", 8-9 August 2017, Kuala Lumpur, Malaysia.

Abdullah, Muhammad and Rossiter, John Anthony (2018) Alternative method for predictive functional control to handle an integrating process. In: 2018 UKACC 12th International Conference on Control (CONTROL), 5th-7th September 2018, Sheffield, United KIngdom.

Abdullah, Muhammad and Rossiter, John Anthony (2018) A Formal sensitivity analysis for laguerre based predictive functional control. In: UKACC 12th International Conference on Control, CONTROL 2018, 5 - 7 September 2018, Sheffield; United Kingdom.

Abdullah, Muhammad and Rossiter, John Anthony (2018) Input shaping predictive functional control for different types of challenging dynamics processes. Processes, 6 (8). pp. 1-18. ISSN 2227-9717

Abdullah, Muhammad and Rossiter, John Anthony (2018) The effect of model structure on the noise and disturbance sensitivity of predictive functional control. In: 16th European Control Conference, ECC 2018, 12-15 June 2018, Limassol, Cyprus.

Abdullah, Nur Azam and Curiel-Sosa, J.L. and Wirawan, Nanda and Akbar, Mahesa (2018) Structural integrity assessment of cracked composite plate under aeroelastic loading by means of XFEM. In: 6th International Conference Integrity-Reliability-Failure, 22-26 Jul 2018, Lisbon, Portugal.

Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Akbar, Mahesa (2018) Aeroelastic assessment of cracked composite plate by means of fully coupled finite element and Doublet Lattice Method. Composite Structures, 202 (SI:Ian Marshall). pp. 151-161. ISSN 0263-8223

Abdullah, Nur Azam and Wirawan, Nanda and Curiel-Sosa, J.L. and Akbar, Mahesa (2018) Aerofracturelastic on wing box of multi-purpose commuter aircraft under gust lby means of XFEM. In: 6th International Conference Integrity-Reliability-Failure, 22-26 Jul 2018, Lisbon, Portugal.

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Evaluating the reduction of stress intensity factor in center-cracked plates using piezoelectric actuators. Actuators, 7 (2). pp. 1-13. ISSN 2076-0825

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Experimental and numerical analysis of piezoelectric active repair of edge-cracked plate. Journal of Intelligent Material Systems and Structures, 29 (18). pp. 3656-3666. ISSN 1045-389X E-ISSN 1530-8138

Adesta, Erry Yulian Triblas and Avicenna, Avicenna and Hilmy, Irfan and Che Daud, Mohd Radzi (2018) Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Ahmad, Kartini and Abdul Halim, Syafrina and Hanouf, Zahir (2018) Variable viscosity of Casson fluid flow over a stretching sheet in porous media with Newtonian heating. Journal of Informatics and Mathematical Sciences, 10 (1 & 2). pp. 359-370. ISSN 0974-875X E-ISSN 0974-875X

Ahmad, Meor iqram Meor and Curiel-Sosa, J.L. and Akbar, Mahesa L. and Abdullah, Nur Azam (2018) Numerical inspection based on Quasi-Static Analysis using Rousselier Damage Model for aluminium wingbox aircraft structure. Journal of Physics: Conference Series, 1106 (1). pp. 1-12. ISSN 1742-6588 E-ISSN 1742-6596

Ahmad, Zuraida and Zain, Saidi and Halim, Zahurin and Ismail, Ahmad Faris (2018) Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study. In: Rejuvenating Islamic thought. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 152-166. ISBN 978-967-491-010-5

Ahmed, Fharrukh and Khan, Sher Afghan (2018) Investigation of efficacy of low length-to-diameter ratio and nozzle pressure ratio on base pressure in an abruptly expanded flow. In: 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, 6 - 7 April 2018, Chennai, Tamilnadu; India.

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Muhammad, Hasibul Hasan (2018) Two-phase fin-induced turbulent cooling for electronic devices using heat pump associated micro-gap Heat Sink. International Journal of Engineering & Technology, 7 (3.13). pp. 113-122. ISSN 2227-524X

Ajala, Mosud T. and Khan, Md. Raisuddin and Shafie, Amir Akramin and Salami, Momoh Jimoh Emiyoka and Nor, M. I. Mohamad Nor and Oladokun, M. O. Oladokun (2018) Optimization of CO2 production rate for fire-fighting robot applications using response surface methodology. Cogent Engineering, 5 (1). pp. 1-17. ISSN 2331-1916

Al-Bahash, Zeid Fadel and Ansari, M.N.M. Ansari and Shah, Qasim Hussain (2018) Design and simulation of a rear underride protection device (RUPD)for heavy vehicles. International Journal of Crashworthiness, 23 (1). pp. 47-56. ISSN 1358-8265 E-ISSN 1754-2111

Al-Robaian, Abdul Rehman A and Khan, Sher Afghan and Asad Ullah, Mohammed and G. M., Fharrukh Ahmed and Imtiyaz, A (2018) A new approach to low-cost open-typed subsonic compressible flow wind tunnel for academic purpose. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6). pp. 383-394. ISSN 2249-6890 E-ISSN 2249-8001

Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. CFD Letters, 10 (2). pp. 18-27. ISSN 2180-1363

Andan, Amelda Dianne and Lee, Duck-Joo (2018) Effect of external acoustic excitation on NACA0015 discrete tonal noise. Applied Acoustics, 141. pp. 374-381. E-ISSN 0003-682X

Asad Ullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Low-cost base drag reduction technique. International Journal of Mechanical Engineering and Robotics Research (IJMERR), 7 (4). pp. 428-432. ISSN 2315-4462

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar (2018) Active control of base pressure with counter clockwise rotating cylinder at Mach 2. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Counter clockwise rotation of cylinder with variable position to control base flows. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Asadullah, Mohammed and Khan, Sher Afghan and Asrar, Waqar and Sulaeman, Erwin (2018) Passive control of base pressure with static cylinder at supersonic flow. In: 1st International Conference on Aerospace and Mechanical Engineering (AeroMech 2017), 21st-22nd Nov. 2017, Pulau Pinang.

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19-20 September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Hrairi, Meftah and Ismail, Ahmad Faris (2018) Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation, 3 (4 (September-October)). pp. 160-186. ISSN 2456-1851

Bashir, Musavir and Rajendran, Parvathy and Khan, Sher Afghan (2018) Energy harvesting from aerodynamic instabilities: Current prospect and future trends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Khan, Sher Afghan (2018) Investigation of base flow for an axisymmetric suddenly expanded nozzle with micro JET. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 236-242. ISSN 2227-524X

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) An analytical technique to obtain higher-order approximate periods for the nonlinear oscillator. IIUM Engineering Journal, 19 (2). pp. 182-191. ISSN 1511-788X E-ISSN 2289-7860

Fauzi, Fatin Bazilah and Ismail, Edhuan and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop and Md Din, Muhammad Faiz and Mohd Abid, Mohd Asyadi Azam (2018) A critical review of the effects of fluid dynamics on graphene growth in atmospheric pressure chemical vapor deposition. Journal of Materials Research, 33 (9). pp. 1088-1108. ISSN 0884-2914 E-ISSN 2044-5326

Fauzi, Fatin Bazilah and Ismail, Edhuan and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop and Md Din, Muhammad Faiz and Mohd Abid, Mohd Asyadi Azam (2018) A critical review of the effects of fluid dynamics on graphene growth in atmospheric pressure chemical vapor deposition. Journal of Materials Research, 33 (9). pp. 1088-1108. ISSN 0884-2914 E-ISSN 2044-5326

G M, Fharukh Ahmed and Al-Robaian, Abdul Rehman A and Aabid, Abdul and Khan, Sher Afghan (2018) Numerical analysis of convergent-divergent nozzle using finite element method. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6). pp. 373-382. ISSN 2249-6890 E-ISSN 2249-8001

Ganat, Tarek A. and Hrairi, Meftah (2018) Gas–liquid two-phase upward flow through a vertical pipe: influence of pressure drop on the measurement of fluid flow rate. Energies, 11 (11). pp. 1-23. ISSN 1996-1073

Ganat, Tarek A. and Hrairi, Meftah (2018) A new choke correlation to predict flow rate of artificially flowing wells. Journal of Petroleum Science and Engineering, 171. pp. 1378-1389. ISSN 0920-4105

Herawan, Safarudin Gazali and Talib, Kamarulhelmy and Putra, Azma and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Musthafah, Mohd Tahir (2018) Prediction of generated power from steam turbine waste heat recovery mechanism system on naturally aspirated spark ignition engine using artificial neural network. Soft Computing, 22 (18). pp. 5955-5964. ISSN 1432-7643 E-ISSN 1433-7479

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) Analytical approximations for the oscillators with anti-symmetric quadratic nonlinearity. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.

Idres, Moumen and Labanie, Mohamed and Okasha, Mohamed Elsayed Aly Abd Elaziz (2018) Transient flow in a compressor blade row for a periodic vibration motion. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Iqbal, Mohammad and Bamatraf, Abdullah Omar Abdullah and Tadjuddin, Muhammad (2018) The study of production performance of water heater manufacturing by using simulation method. In: 2nd International Conference on Nuclear Technologies and Sciences, ICoNETS 2017, 12 -13 October 2017, Makassar; Indonesia.

Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Mansor, Hasmah (2018) Trajectory tracking of quaternion based quadrotor using model predictive control. International Journal of Engineering and Technology (UAE), 7 (4.13). pp. 125-128. ISSN 2227-524X

Jameel, Ahmad Tariq and Hamza, Mohammad Ameer and Asrar, Waqar (2018) Nonlinear dynamics of heated falling films under the influence of long-range Van Der Walls intermolecular force interactions. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Abdul Latif, Muhammad Alif (2018) Improvement of MRR and surface roughness during electrical discharge machining (EDM) using aluminum oxide powder mixed dielectric fluid. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Al Hazza, Muataz Hazza Faizi and Norhamzan, Norainnatul Husna (2018) Enhancement of machining performance during electrical discharge machining of stainless steel with carbon nanotube powder added dielectric fluid. International Journal of Applied Engineering Research, 13 (9). pp. 7076-7080. ISSN 0973-4562 E-ISSN 0973-9769

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Norhamzan, Norainnatul Husna (2018) A comparative study on flank wear of ceramic and Tungsten carbide inserts during high speed machining of stainless steel. International Journal of Applied Engineering Research, 13 (5). pp. 2541-2544. ISSN 0973-4562 E-ISSN 0973-9769

Khan, Ahsan Ali and Muataz Hazza Faizi, Muataz and Mohiuddin, A. K. M. and Abdul Fattah, Nurfatihah and Che Daud, Mohd Radzi (2018) Performance of electrical discharge machining (EDM) with nickel added dielectric fluid. IIUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X E-ISSN 2289-7860

Khan, Ambareen and Abid, Abdul and Khan, Sher Afghan (2018) CFD analysis of convergent-divergent nozzle flow and base pressure control using micro-JETS. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 232-235. ISSN 2227-524X

Khan, Sher Afghan and Aabid, Abdul and Baig, Maugal Ahmed Ali (2018) Design and fabrication of unmanned arial vehicle for multi-mission tasks. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4). pp. 475-484. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Abid, Abdul and Baig, Maugal Ahmed Ali (2018) CFD analysis of CD nozzle and effect of nozzle pressure ratio on pressure and velocity for suddenly expanded flows. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1147-1157. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Ali, Mir Owais and Riyadh, Miah Mohammed and Hossen, Zahid and Arefin, Nafis Mahdi (2018) Assessment of different turbulence models in simulating axisymmetric flow in suddenly expanded nozzles. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 243-248. ISSN 2227-524X

Khan, Sher Afghan and Asad Ullah, Mohammed and G M, Fharukh Ahmed and Jalaluddeen, Ahmed and Ali Baig, Maughal Ahmed (2018) Flow control with aero-spike behind bluff body. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1001-1008. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Asad Ullah, Mohammed and G M, Fharukh Ahmed and Jalaluddeen, Ahmed and Baig, Maugal Ahmed Ali (2018) Passive control of base drag in compressible subsonic flow using multiple cavity. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4). pp. 39-44. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Asad Ullah, Mohammed and Sadiq, Jafar (2018) Passive control of base drag employing dimple in subsonic suddenly expanded flow. International Journal of Mechanical & Mechatronics Engineering, 18 (3). pp. 69-74. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Asadullah, Mohammad and G.M, Fharukh Ahmed. and Jalaluddeen, Ahmed and Baig, Maughal Ahmed Ali (2018) Flow control with aerospike behind bluff body. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1001-1008. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Chaudhary, Zakir Ilahi and Shinde, Vilas B. (2018) Base pressure control by supersonic micro jets in a suddenly expanded nozzle. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (4). pp. 101-112. ISSN 2077-124X E-ISSN 2227-2771

Khan, Sher Afghan and Fatehpurwala, M A and Pathan, Khizer Ahmed and Dabeer, P S and Baig, Maugal Ahmed Ali (2018) CFD analysis of human powered submarine to minimize drag. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3). pp. 1057-1066. ISSN 2249-6890 E-ISSN 2249-8001

Khan, Sher Afghan and Riyadh, MiahMohammed and Ibrahim, Mir Owais Ali and Elrashid, Yousof and Arefin, Nafis Mahdi and Kabir, Shahriar and G M, Fharukh Ahmed (2018) Design & development of a gravity powered fan using gear transmission. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)). pp. 632-637. ISSN 2227-524X

Kun-Lin, Lee and Nordin, Anis Nurashikin and Voiculescu, Ioana R. (2018) Preliminary exploration of cell-based SAW detection for water toxicity. In: ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE 2018), 9th-15th Nov. 2018, Pittsburgh; United States.

Malik, Khurshid and Asrar, Waqar and Sulaeman, Erwin (2018) Low reynolds number numerical simulation of the aerodynamic coefficients of a 3D wing. International Journal of Aviation, Aeronautics, and Aerospace, 5 (1). pp. 1-27. ISSN 2374-6793

Mel, Maizirwan and Hussein Abdeen, Fouad Riyad and Mohd. Salleh, Hamzah and Ihsan, Sany Izan and Ahmad Fuad, Fazia Adyani and Setyobudi, Roy Hendroko (2018) Simulation study of bio-methane conversion into hydrogen for generating 500 kw of power. In: 3rd International Conference on Electrical Systems, Technology and Information, ICESTI 2017, 26th-29th September 2017, Mercure Bali HarvestlandDenpasar, Bali.

Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Sulaeman, Erwin and Omar, Ashraf Ali (2018) Aerodynamics of porous airfoils and wings. Acta Mechanica, online 1st. pp. 1-19. ISSN 0001-5970 E-ISSN 1619-6937 (In Press)

Mohammed Riyadh, Miah and Syed Mohamed Ali, Jaffar (2018) A matlab based educational software for the study on the effect of cut-out in aircraft wings. International Journal of Engineering & Technology, 7 (4.25). pp. 114-118. ISSN 2227-524X

Mohammed Umair, Siddque and Alrobaian, Abdul Rahman and Khan, Sher Afghan and Gnanagonda Kashinath, Marthande and Rajesh, Patil (2018) Numerical investigation of critical range for the occurrence of secondary peaks in the Nusselt distribution curve. CFD Letters, 10 (2). pp. 1-17. ISSN 2180-1363

Mohiuddin, A. K. M. and Basran, Norasyikin and Khan, Ahsan Ali (2018) Modelling and validation of proton exchange membrane fuel cell (PEMFC). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 Aug 2017, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Mohiuddin, A. K. M. and Syafie, Ahmad and Khan, Ahsan Ali (2018) Design and analysis of fuel cell stack for automotive use. International Review of Mechanical Engineering (IREME), 12 (6). pp. 540-547. ISSN 1970-8734 E-ISSN 2532-5655

Muhammad, Abdulazeez Uba and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Automotive seat fit parameters based on representative Nigerian anthropometric data. Malaysian Journal of Public Health Medicine, 18 (Special Issue 2). pp. 32-40. ISSN 1675-0306

Mukhtar, Azfarizal and Ng, Khai Ching and Yusoff, Mohd Zamri (2018) Passive thermal performance prediction and multi-objective optimization of naturally-ventilated underground shelter in Malaysia. Renewable Energy, 123. pp. 342-352. ISSN 0960-1481

Mukhtar, Azfarizal and Yusoff, Mohd Zamri and Ng, Khai Ching (2018) An empirical estimation of underground thermal performance for Malaysian climate. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Munshi, Adnan and Sulaeman, Erwin and Omar, Norfazzila and Ali, Mohammad Yeakub (2018) CFD analysis on the effect of winglet cant angle on aerodynamics of ONERA M6 wing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 44-54. ISSN 2289-7879

Norsahperi, Nor Mohd Haziq and Ahmad, Salmiah and Toha @ Tohara, Siti Fauziah and Mahmood, Iskandar Al-Thani and Mohamad Hanif, Noor Hazrin Hany (2018) Robustness analysis of fractional order PID for an electrical aerial platform. Journal of Mechanical Science and Technology, 32 (11). pp. 5411-5419. ISSN 1738-494X E-ISSN 1976-3824

Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Abdul Ghaffar, Alia Farhana (2018) Satellite attitude tracking control using thrusters and momentum wheels. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Okasha, Mohamed Elsayed Aly Abd Elaziz and Islam, Maidul and Sulaeman, Erwin and Legowo, Ari (2018) Evaluation performance of linear quadratic regulator and linear quadratic gaussian controllers on quadrotor platform. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Okasha, Mohamed Elsayed Aly Abd Elaziz and maidul, islam and Idres, Moumen (2018) DYNAMICS AND CONTROL OF MINI AERIAL VEHICLE USING MODEL PREDICTIVE CONTROL. Thesis. IIUM, Kuala Lumpur.

Pathan, Khizer Ahmed and Dabeer, P S and Khan, Sher Afghan (2018) An investigation to control base pressure in suddenly expanded flows. International Review of Aerospace Engineering (IREASE), 11 (4). pp. 162-169. ISSN 1973-7459 E-ISSN 2533-2279

Pathan, Khizer Ahmed and Dabeer, P. S. and Khan, Sher Afghan (2018) Optimization of area ratio and thrust in suddenly expanded flow at supersonic Mach numbers. Case Study in Thermal Engineering, 12. pp. 696-700. ISSN 2214-157X

Quadros, Jaimon Dennis and Khan, Sher Afghan and A. J., Antony (2018) Modelling of suddenly expanded flow process in supersonic Mach regime using design of experiments and response surface methodology. International Journal of Computational and Applied Mechanics, 49 (1). pp. 149-160. ISSN 2423-6713 E-ISSN 2423-6705

Quadros, Jaimon Dennis and Khan, Sher Afghan and A. J., Antony (2018) Study of effect of flow parameters on base pressure in a suddenly expanded duct at supersonic mach number regimes using CFD and design of experiments. Journal of Applied Fluid Mechanics, 11 (2). pp. 483-496. ISSN 1735-3572 E-ISSN 1735-3645

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2018) Base pressure behaviour in a suddenly expanded duct at supersonic mach number regimes using Taguchi design of experiments. Mechanics and Mechanical Engineering, 22 (4). pp. 1077-1097. ISSN 1428-1511 E-ISSN 2354-0192

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2018) Study of base pressure behavior in a suddenly expanded duct at supersonic mach number regimes using statistical analysis. Journal of Applied Mathematics and Computational Mechanics, 17 (4). pp. 59-72. ISSN 2299-9965 E-ISSN 2353-0538

Rahimi, Norzihan and Hussain, Ahmad Kamil and Shaik Dawood, Mohd. Sultan Ibrahim and Mohd Alias, Adib Zulfadhli and Md Yusoff, Muhamed Hafiy Afiq and Mahmud, Jamaluddin (2018) Failure analysis of woven Kevlar/Epoxy under uniaxial tension. International Journal of Engineering and Technology(UAE), 7 (4). pp. 235-239. ISSN 2227-524X

Rahman, Md Mujibur and Rahman, Haolia Y. and Awang, M. A.A. and Sopyan, Lis (2018) Effects of sintering time and temperature to the characteristics of FeCrAl powder compacts formed at elevated temperature. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Rahman, Mohammed Ataur and Amsyar, Mohamad and Ihsan, Sany Izan and Mohiuddin, A. K. M. (2018) Electro-hydro-mechanical braking system for passenger vehicle. Journal of Applied Science, 2018. pp. 1-9. ISSN 1812-5654 E-ISSN 1812-5662 (In Press)

Rahman, Mohammed Ataur and Aung, Kya Myo (2018) Modelling and simulation of graphene/palladium catalyst reformer for hydrogen generation from the waste of IC engine. IOP Conference Series: Materials Science and Engineering, 290. pp. 2-13. ISSN 1757-899X

Rahman, Mohammed Ataur and Kaw, Myo Aung and Afroz, Rafia (2018) Modeling and simulation of Graphene/Palladium catalyst reformer for hydrogen generation from waste of IC engine. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Mohammed, Azri and Kyaw, Myo Aung and Ismail, Ahmad Faris and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2018) Prospect and challenges of electric vehicle adaptability: an energy review Malaysia. Energy Education Science and Technology Part A:Energy Science and Research, 36 (3). pp. 139-151. ISSN 1308-772X

Rahman, Mohammed Ataur and Saifullah, Khalid and Sany, Ihsan and Aung, Kyaw Myu and Ismail, Ahmad Faris and Ihsan, Sany Izan (2018) Nano conductive filler polymer towards energy efficient EV: A review. Energy Education Science and Technology Part A: Energy Science and Research, 36 (3). pp. 185-204. ISSN 1308-772X

Ramli, Muhammad Faiz and Shamsudin, Syariful Syafiq and Legowo, Ari (2018) Safe avoidance path detection using multi sensor integration for small unmanned aerial vehicle. In: 5th IEEE International Workshop on Metrology for AeroSpace, MetroAeroSpace 2018, 20 - 22 June 2018, Rome; Italy.

Rashid, Mohammed Abdur N. and Khan, Sher Afghan and Muhamad Khairussaleh, Nor Khairusshima and Sarifuddin, Norshahida (2018) Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2930-2934. ISSN 1819-6608

Saleel, Ahmed and Baig, Maughal Ahmed Ali and Khan, Sher Afghan (2018) Experimental investigation of the base flow and base pressure of sudden expansion nozzle. In: International Conference on Aerospace and Mechanical Engineering (AeroMech17), 21st-22nd November 2017, Batu Ferringhi, Penang.

Salleh, Hafiz and Saharin, Sanisah and Azmi, Mohammad Hanafi and Khan, Sher Afghan (2018) Fluid-structure interactions of variable span wings in low Reynold flows. International Journal of Engineering & Technology, 7 (3.29). pp. 381-385. ISSN 2227-524X

Saputra, Irwan and Jaswir, Irwandi and Akmeliawati, Rini (2018) Profiling of wavelength biomarkers of pure meat samples from different species based on Fourier transform infrared spectroscopy (FTIR) and PCA techniques. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1617-1624. ISSN 2088-5334

Sethuraman, Vigneshvaran and Khan, Sher Afghan (2018) Base pressure control using micro-jets in supersonic flow regimes. International Journal of Aviation, Aeronautics, and Aerospace, 5 (1). pp. 1-26. ISSN 2374-6793

Shabana, Ayesha and Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2018) The computation of stiffness derivative for an ogive in the hypersonic flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (5). pp. 173-184. ISSN 2249-6890 E-ISSN 2249-8001

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Computation of stability derivatives of an oscillating cone for specific heat ratio = 1.66. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21 - 22 November 2017, Parkroyal HotelBatu Ferringhi, Penang.

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Effect of semi vertex angle on stability derivatives for an oscillating cone for constant value of specific heat ratio. International journal of Engineering & Technology, 7 (3.29). pp. 386-390. ISSN 2227-524X

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2018) Estimation of stability derivatives in newtonian limit for oscillating cone. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017, 21-22 November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Shah, Jawad and Okasha, Mohamed and Faris, Waleed Fekry (2018) Gain scheduled integral linear quadratic control for quadcopter. International Journal of Engineering and Technology, 7 (4.13 (Special issue 13)). pp. 81-85. ISSN 2227-524X

Shanbhag, Pavitra and S., Lavanya and Khan, Sher Afghan (2018) Stability derivatives of a oscillating wedges in viscous hypersonic flow. In: 1st International Conference on Aerospace and Mechanical Engineering (AeroMech 2017), 21st-22nd Nov. 2017, Pulau Pinang.

Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Badran, Marwan A A (2018) Trilinear finite element solution of three dimensional heat conduction partial differential equations. International Journal of Engineering & Technology (UAE), 7 (4.36). pp. 379-384. ISSN 2227-524X

Syed Mohamed Ali, Jaffar and Ali, Mir Owais and Riyadh, Miah Mohammed (2018) Educational software for stress analysis of non-idealized closed thin-walled sections. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Masturah, Mohamad (2018) Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 9-17. E-ISSN 0128-1852

Syed Mohamed Ali, Jaffar and Nur Fadhila, Hasna and Makame, Burhani and Riyadh, Miah Mohammed (2018) Educational software for stress analysis of idealized closed thin walled sections. In: International Conference on Aviation Technology and Management (ICATEM2018), 12th-14th Sept. 2018, Kuala Lumpur. (Unpublished)

Syed Mohamed Ali, Jaffar and Omar, Ashraf Al and Nasikin, Mohd Faiz Diuzzaman (2018) Numerical and experimental study on the effect of cab-extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, xx (xx). pp. 1-8. ISSN 2289-7879 (In Press)

Tanasta, Z. and Muhamad, Pauziah and Kuwano, Noriyuki and Mohd Yatim, Norfazrina Hayati and Unuh, Mohd Hishamuddin (2018) Reduction of defects on microstructure aluminium nitride using high temperature annealing heat treatment. In: 3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering 2017, ICMMPE 2017, 22nd–23rd November 2017, Parkroyal HotelBatu Ferringhi, Penang; Malaysia.

Uba, Muhammad Abdulazeez and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Representative Nigerian anthropometric data for automotive applications. Journal of Mechanical Engineering, 5 (Specialissue 4). pp. 68-88. ISSN 1823-5514

Wirawan, Nanda and Abdullah, Nur Azam and Akbar, Mahesa and Curiel-Sosa, J.L. (2018) Analysis on cracked commuter aircraft wing under dynamic cruise load by means of XFEM. In: Modern Practice in Stress and Vibration Analysis (MPSVA) 2018, 2nd-4th July 2018, Cambridge, UK.

Yosri, M. H. and Muhamad, Pauziah and Ismail, Mohamad Amiruddin and Mohd Yatim, Norfazrina Hayati (2018) Air ionizer application for electrostatic discharge (ESD) dust removal in automotive painting industry. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Zakaria, Faiz and Hrairi, Meftah and Daoud, Jamal Ibrahim (2018) Multi-objective optimization of incremental sheet metal forming. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)