Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool

Rashid, Mohammed Abdur N. and Khan, Sher Afghan and Muhamad Khairussaleh, Nor Khairusshima and Sarifuddin, Norshahida (2018) Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2930-2934. ISSN 1819-6608

	PDF - Published Version Restricted to Registered users only Download (286kB) | Request a copy
	PDF (SCOPUS) - Supplemental Material Restricted to Registered users only Download (487kB) | Request a copy

Abstract

Jute fiber-reinforcement polymer (JFRP) composite is a cheap material that is broadly used in automotive, marine, air- crafts, domestic upholstery applications because of its various high quality properties. During machining, a few of problems arise due to the Jute fiber in JFRP. Abrasive nature of this composite creates tool wear on the cutting tools during JFRP machining, thereby the life of the cutting tool become shorter and damage the surface quality. In this study, the solid uncoated carbide cutting tool (8.0 mm) performance and the life of tool were measured on the JFRP composite panel during the CNC milling process were examined. A spindle speed ranging from 671.57 rev/min to 6328.43 rev/min and a feed rate ranging from 108.58 mm/min to 391.42 mm/min were used in the experiment. Results found that the longest tool life 41.6 min were achieved at lowest feed rate 108.58 mm/min and the highest spindle speed 6328.43 rev/min effects on tool life 14.4 min. The shining area of the cutting tool shows the abrasive nature of jute fiber and chips formation mechanism.

Item Type:	Article (Journal)
Additional Information:	7395/64195
Uncontrolled Keywords:	jute fiber reinforcement polymer, solid uncoated carbide tool, tool wear, tool life, delamination, surface quality
Subjects:	T Technology > TS Manufactures > TS200 Metal manufactures. Metalworking
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering Kulliyyah of Engineering > Department of Mechanical Engineering
Depositing User:	Prof. Dr. Sher Afghan Khan
Date Deposited:	28 Jun 2018 15:36
Last Modified:	29 Jun 2018 10:28
URI:	http://irep.iium.edu.my/id/eprint/64195

Actions (login required)

View Item