IIUM Repository

Prof. Dr. AHM Zahirul Alam

Professor

Electrical and Computering Engineering

International Islamic University Malaysia

Solid state devices modelling and characterizations, Microelectronic circuit design, RF CMOS and RF MEMS, VLSI circuit design, Antenna design, Fabrication processes and material characterizations by XRD, FTIR, Raman Spectroscopy, AFM, TEM/SEM, etc.

AHM Zahirul Alam received the B.Sc. and M.Sc. degrees in Electrical and Electronic Engineering from Bangladesh University of Engineering and Technology (BUET) in 1984 and 1987, respectively. He obtained his Doctor of Engineering degree from Kanazawa University, Japan in 1996. He was working as a faculty member in BUET from 1985 to 1991 and from 1996 to March 2002. He became a professor in BUET in 1999. He worked in the MIRAI project in Low-k group in Advanced Semiconductor Research Center, Tsukuba, Japan through Japan Science and Technology fellow from April 2002 to October 2003. He is currently serving as a Professor of Electrical and Computer Engineering Department, Faculty of Engineering, International Islamic University Malaysia (IIUM). His research interest includes electronic devicmore...

Doctor of Engg., Natural Science and Engineering, Kanazawa University, Japan March 1996 M.Sc. Engg. Electrical and Electronic Engineering, BUET, Bangladesh July 1987 B.Sc. Engg. Electrical and Electronic Engineering, BUET, Bangladesh August 1984 BUET: Bangladesh University of Engineering and Technology

Profile Picture

Latest Additions

  1. Abdul Khalid, Mohamad Izzat Za’im bin Abdul Khalid and Alam, A. H. M. Zahirul (2026) Analysis of variable frequency drive for electric vehicles. Asian Journal of Electrical and Electronic Engineering, 6 (1). pp. 18-24. E-ISSN 2785-8189
  2. Nahid, Firuz Ahamed and Akter, Khadiza and Motakabber, S. M. A. and Alam, A. H. M. Zahirul (2025) Socio-economic impacts of clean energy transition in Bangladesh. In: 2025 10th International Conference on Computer & Communication Engineering, 26-27 August 2025, KOE, IIUM.
  3. Das, Bipul Chandra and Hasan Shovo, M.H. and Islam, Md. Rafiqul and Alam, A. H. M. Zahirul and Hasan Mahfuz, M M and Habaebi, Mohamed Hadi and Abdul Malek, Norun Farihah and UNSPECIFIED (2025) AI-empowered mm-wave antenna design. In: 2025 10th International Conference on Computer and Communication Engineering (ICCCE), 26-27 August 2025, KOE, IIUM.
  4. Elisa Razali, Nur Ain and Alam, AHM Zahirul (2025) Design and analysis of digital control buck converter for optimum performance. Asian Journal of Electrical and Electronic Engineering, 5 (1). pp. 32-39. E-ISSN 2785-8189
  5. Iskandar Tuah, Hanis Humaira and Alam, A. H. M. Zahirul (2024) Design of a Wilkinson Power Divider with harmonic suppression for mobile application. Asian Journal of Electrical and Electronic Engineering, 4 (1). pp. 29-35. E-ISSN 2785-8189
  6. Alam, A. H. M. Zahirul and Alam, Md Zahangir and Shaik Dawood, Mohd. Sultan Ibrahim, eds. (2023) IIUM Engineering Congress Proceedings (IIUMECP). Kulliyyah of Engineering, IIUM, Kuala Lumpur, Malaysia.
  7. Hasan, Muhammad Wasif and Alam, A. H. M. Zahirul (2023) Effect of inductor for designing an inverter to maximize solar panel power output. Asian Journal of Electrical and Electronic Engineering, 3 (1). pp. 34-40. E-ISSN 2785-8189
  8. Che Mat, Zulaikha and Alam, A. H. M. Zahirul (2021) Effects of passive components on designing a three-phase DC-DC converter. Asian Journal of Electrical and Electronic Engineering, 1 (2). pp. 37-45. E-ISSN 2785-8189
  9. Darmis, Naimah Binti and Alam, A. H. M. Zahirul and Mohd Hashim, Muhaimin Bin (2021) Ferroelectric behavior and NCFETs - TCAD Simulation. Asian Journal of Electrical and Electronic Engineering, 1 (1). pp. 30-41. E-ISSN 2785-8189
  10. Hashim, Muhaimin Bin Mohd and Alam, A. H. M. Zahirul and Darmis, Naimah Binti (2021) Effect of Ferro electric thickness on Negative Capacitance FET (NCFET). IIUM Engineering Journal, 22 (1). pp. 339-346. ISSN 1511-788X E-ISSN 2289-7860
  11. Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Baillorgeat, Dominique and Joyo, M. Kamran (2020) Study of parametric effects due to mutual coupling using high permittivity dielectric-director in planar array configuration. In: 2020 7th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS), 18-20 December 2020, Kuala Lumpur, Malaysia.
  12. Mahmud, Md and Motakabber, S. M. A. and Alam, A. H. M. Zahirul and Nordin, Anis Nurashikin (2020) Adaptive PID controller using for speed control of the BLDC motor. In: 2020 IEEE International Conference on Semiconductor Electronics (ICSE), 28-29 September 2020, Kuala Lumpur, Malaysia.
  13. Mahmud, Md and Motakabber, S. M. A. and Alam, A. H. M. Zahirul and Nordin, Anis Nurashikin (2020) Control BLDC Motor Speed using PID Controller. International Journal of Advanced Computer Science and Applications, 11 (3). pp. 477-481. ISSN 2158-107X E-ISSN 2156-5570
  14. Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Ahmed, Syed Faiz and Shahid, Zeeshan and Khan, Talha Ahmed (2019) High-gain rectangular-fins shaped balanced antipodal vivaldi antenna array extended by dielectric for wide-band imaging application. In: 2019 IEEE International Conference on Innovative Research and Development (ICIRD), 28th-30th June 2019, Jakarta, Indonesia.
  15. Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Shahid, Zeeshan and Khan, Talha Ahmed (2019) Design and comparative validation of antipodal vivaldi antenna using periodic elliptical-slots with extended triangular-shaped as dielectric lens for microwave imaging applications. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27th-29th August 2019, Kuala Lumpur, Malaysia.
  16. Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Habaebi, Mohamed Hadi and Baillargeat, Dominique and Kadir, Kushsairy Abdul and Shah, Jawad Ali and Shahid, Zeeshan and Yahya, Muhammad (2019) UWB antenna based time-domain approach for through the walls gap estimation. In: 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2019), 20th-23rd May 2019, Auckland, New Zealand.
  17. Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz and Azman, Amelia Wong (2019) Parasitic consideration for differential capacitive sensor. Bulletin of Electrial Engineering and Informatics, 8 (3). pp. 798-807. ISSN 2089-3191 E-ISSN 2302-9285
  18. Che Mustapha, Nurul Arfah and Alam, A. H. M. Zahirul and Khan, Sheroz and Azam, Amelia Wong (2019) Frequency dependency analysis for differential capacitive sensor. Bulletin of Electrial Engineering and Informatics, 8 (3). pp. 789-797. ISSN 2089-3191 E-ISSN 2302-9285
  19. Hoque, Mohammad Mominul and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Alam, A. H. M. Zahirul and Akter, Mahfuza (2019) An Arduino microcontroller based RLC meter. In: 2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 21st - 23rd August 2019, Kuala Lumpur, Malaysia.
  20. Amin, Ifte Khairul and Nasir Uddin, Mohammad and Hannan, Mahammad Abdul and Alam, A. H. M. Zahirul (2019) Adaptive neuro-fuzzy controller for grid voltage dip compensations of grid connected DFIG-WECS. In: 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 12th-15th May 2019, San Diego, CA, USA, USA.

Most Viewed Items

Item titleViews
1Ferroelectric behavior and NCFETs - TCAD Simulation1891
2Control BLDC Motor Speed using PID Controller1706
3Development of economical maximum power point tracking system for solar cell1623
4Modeling of optimum chiral carbon nanotube using DFT1545
5A mathematical study of a thermistor astable multivibrator in a linearization technique1532
6An Arduino microcontroller based RLC meter1515
7Development of a position detection technique for UWB chipless RFID tagged object1495
8Wireless structural health monitoring system by capacitor sensing technique1456
9Analysis of CNT electronics structure to design CNTFET1456
10Design of a pierce oscillator for CMOS SAW resonator1448
11Design of a multiple valued logic analog to digital converter using 0.13μm CMOS process1444
12Microelectrical mechanical systems switch for designing multi-band antenna1436
13Analysis of rectifier circuits for low power and sensing application1431
14Capacitive transducer circuits for liquid level measurement1421
15Parametric analysis for designing low voltage and low frequency energy harvester booster1417
16A DC-DC circuit using boost converter for low voltage energy harvesting application1416
17Design and implementation of potentiometer-based nonlinear transducer emulator1413
18Negative bias temperature instability characterization and lifetime evaluations of submicron pMOSFET1404
19Adaptive PID controller using for speed control of the BLDC motor1400
20Design of a low noise amplifier with GaAs MESFET at Ku-Band1398
21Current behavior analysis of the single supply differential capacitive sensing1394
22Environmental friendly device: modeling of carbon nanotube with optimum chirality1394
23A study of linearization technique using a nonlinear thermistor1381
24Design of capacitance to voltage converter for capacitive sensor transducer1375
25Designing large-scale antenna array using sub-array1367
26Improvement of temperature dependence of carrier characteristics of quantum dot solar cell using InN quantum dot1366
27Low value capacitance measurement system for the application of monitoring human body1352
28Rule-based fuzzy logic controller with adaptable reference1350
29Small band-gap-based CNT for modeling of nano sensor1340
30A pressure sensor based inductive transducer designed for biomedical applications1319