IIUM Repository

Synthetization of TiC surface hardening using TIG melting technique - the effect of working distance

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2022) Synthetization of TiC surface hardening using TIG melting technique - the effect of working distance. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21-23 June 2021, Kuala Lumpur, Malaysia.

[img] PDF - Published Version
Restricted to Registered users only

Download (772kB) | Request a copy

Abstract

SSurface hardening with and without hard reinforcing material can be achieved by melting technique on the top substrate area via high energy input fusion. The aim is to apply TIG torch heat input of 1344 J/mm at two different working distances such as 0.5 mm and 1.5 mm to incorporate the preplaced TiC particulates on the surface of AISI 4340 low alloy steel. Results pertaining to the microstructural features, melt pool sizes, defects, topographies and microhardness were investigated using the optical microscope, scanning electron microscope and Vickers microhardness tester. The results showed that the heat loss through the arc column at 1.5 mm of working distance resulted small melt pool geometry and poor dissolution of TiC particulates. Lower working distance increases heating value leading more precipitation of TiC whilst minimizing those the undissolved particulates. The surface submerged at working distance of 0.5 mm produced microhardness ranging from 800 HV to 1500 HV. The work suggested that heat fusion can be enhanced by marginal working distance whilst saving the energy to melt instead of increasing the used voltage, current, decreasing scanning speed, or adding fluxes or shielding with special gasses.

Item Type: Conference or Workshop Item (Invited Papers)
Subjects: T Technology > T Technology (General) > T11.95 Industrial directories
T Technology > TA Engineering (General). Civil engineering (General) > TA2001 Plasma engineering. Applied plasma dynamics
T Technology > TA Engineering (General). Civil engineering (General) > TA401 Materials of engineering and construction
T Technology > TN Mining engineering. Metallurgy > TN600 Metallurgy
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering
Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User: Prof Dr. Md Abdul Maleque
Date Deposited: 14 Jul 2022 09:54
Last Modified: 14 Jul 2022 11:31
URI: http://irep.iium.edu.my/id/eprint/98747

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year