IIUM Repository

Analysis of corner radius in dry micro WEDM

Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)

[img] PDF - Submitted Version
Restricted to Registered users only

Download (560kB) | Request a copy
[img] PDF - Supplemental Material
Restricted to Repository staff only

Download (127kB) | Request a copy
Official URL: http://www.ijmerr.com/

Abstract

Dry micro WEDM is a machining process where gas is used as the dielectric medium instead of liquid. This process favored for its environmental friendly nature and its ability in machining complex intricate shapes with great precision. Regardless of its high precision, the machining precision of cutting sharp corners cannot be satisfied. Therefore, the purpose of this paper is to analyze the process parameters; gap voltage, wire tension, and air dielectric pressure to find the optimal parameters to minimize the radius during the sharp corner cutting of stainless steel workpiece. Compressed air was used as the dielectric fluid, whereas the electrode was a 70 micrometer tungsten wire. The experiments were design using full factorial method while the data were analyzed using analysis of variance (ANOVA). Based on ANOVA, gap voltage and wire tension had a major influence on the corner radius. The optimum parameters for minimum corner radius were found to be 85 V gap voltage, 0.16 N wire tension, and 0 MPa dielectric pressure.

Item Type: Article (Journal)
Additional Information: 4751/66448
Uncontrolled Keywords: corner radius, dry WEDM, dry micro WEDM
Subjects: T Technology > T Technology (General)
T Technology > T Technology (General) > T175 Industrial research. Research and development
T Technology > TJ Mechanical engineering and machinery
T Technology > TS Manufactures
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Kulliyyah of Engineering
Depositing User: Prof. Ir. Dr. Mohammad Yeakub Ali
Date Deposited: 18 Oct 2018 11:22
Last Modified: 18 Oct 2018 11:22
URI: http://irep.iium.edu.my/id/eprint/66448

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year