IIUM Repository

An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel

Musa, Mukhtaruddin Iqbal A. and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

[img] PDF - Published Version
Restricted to Registered users only

Download (679kB) | Request a copy
[img] PDF (SCOPUS) - Supplemental Material
Restricted to Registered users only

Download (477kB) | Request a copy
[img] PDF (WoS) - Published Version
Restricted to Repository staff only

Download (417kB) | Request a copy

Abstract

Nowadays a wide variety of metal joining methods are used in fabrication industries. In this study, the effect of various welding parameters of the TIG welding process on microhardness, depth, and microstructure of the heat-affected zone (HAZ) of L450 HSLA steel and optimizing these process parameters following Taguchi experimental design was investigated. The microhardness tended to increase significantly with the increase of welding speed from 1.0 to 2.5 mm/s whereas the width of HAZ decreased. The current and arc voltage was found to be less significant in relative comparison. Microstructures of the welded samples were also studied to analyze the changes in the microstructure of the material in terms of ferrite, pearlite, bainite, and martensite formations. Welding speed was found to be the most significant factors leading to changes in microhardness and metallurgical properties. The increase of welding heat input caused an increase in width (depth) of HAZ and the growth of prior austenite grains and then enlarged the grain size of coarse grain heat affected zone (CGHAZ). However, the amount of martensite in the HAZ decreased accompanied by an opposite change of paint. It was observed that the hardness properties and the microstructural feature of HAZ area was strongly affected by the welding parameters.

Item Type: Conference or Workshop Item (Plenary Papers)
Additional Information: 6103/63770
Uncontrolled Keywords: Coarse grain heat affected zone, Martensite Formation, Metallurgical properties, Microhardness and microstructure, Microstructural features, Prior austenite grains, Taguchi experimental design, TIG welding process
Subjects: T Technology > T Technology (General) > T11.95 Industrial directories
T Technology > TN Mining engineering. Metallurgy > TN600 Metallurgy
T Technology > TN Mining engineering. Metallurgy > TN799.5 Nonmetallic minerals
T Technology > TS Manufactures > TS200 Metal manufactures. Metalworking
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User: Prof Dr. Md Abdul Maleque
Date Deposited: 22 May 2018 10:34
Last Modified: 31 Jul 2018 16:14
URI: http://irep.iium.edu.my/id/eprint/63770

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year