Items where Subject is "T Technology > TN Mining engineering. Metallurgy > TN799.5 Nonmetallic minerals"

A

A., Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2012) Carbon nano tube reinforced aluminium matrix nano-composite: a critical review. Australian Journal of Basic and Applied Sciences, 6 (12). pp. 69-75. ISSN 1991-8178

Abd Malek, Zetty Akhtar and Rahman, Md Mustafizur and Kadirgama, Kumaran and Rahman, Saidur and Maleque, Md. Abdul (2020) Thermal conductivity and viscosity of TiO2/MWCNTs (doped 10wt% graphene) - ethylene glycol based nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 32-46. ISSN 2289-7879

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) Characterization of carbon nanotube reinforced aluminium nano-composite using field emission scanning electron microscope. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 73-77. E-ISSN 0128-1852

Adebisi, Adetayo A. and Maleque, Md. Abdul and Ali , Mohammad Yeakub and Bello, Kamilu Adeyemi (2015) Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites. In: Malaysian International Tribology Conference 2015, 16th-17th Nov. 2015, Penang, Malaysia.

Adebisi, Adetayo A. and Maleque, Md. Abdul and Bello, Kamilu Adeyemi (2020) Interface study of SiCp/6061Al composite. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 456-461. ISBN 978-0-12-813196-1

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Bello, Kamil Adeyemi (2016) Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces, 23 (6). pp. 533-547. ISSN 0927-6440 E-ISSN 1568-5543

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ndaliman, Mohammed Baba (2016) Influence of stirring speed on microstructure and wear morphology of SiCp-6061Al composite. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 21-26. E-ISSN 0128-1852

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Zamani, A. R. (2012) Development of waste coir-reinforced aluminum matrix automotive brake pad material. In: IRIIE2012, 21-22 February 2012, CAC, IIUM. (Unpublished)

D

Debnath, Sujan and Oo, Zeya and Rahman, Muhammad Ekhlasur and Maleque, Md. Abdul and Tan, Chong Keng (2012) Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Engineering and Applied Sciences, 6. pp. 288-291. ISSN 1819-6608

F

Fuhaid, Mutlag Sh. and Maleque, Md. Abdul and Venkat, Murali and Abd. Rahman, Mohamed (2021) Natural and industrial origin reinforced LM6 aluminum matrix composite materials – a comparative study. In: International Conference on Recent Innovations in Science and Technology (RIST 2021), 19-20 June 2021, Virtual. (In Press)

Fuhaid, Mutlag Shafi and Murali, R V and Maleque, Md. Abdul and Krishnan, P K and Abd. Rahman, Mohamed (2021) Synthesis and characterisation of aluminium composite with graphene oxide reinforcement. IOP Conference Series: Materials Science and Engineering, 1057. pp. 1-12.

H

Huzaifah, M. R.M. and Mohd Sapuan, Salit and Leman, Z. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul (2017) A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites. Multidiscipline Modeling in Materials and Structures, 13 (4). pp. 678-698. ISSN 1573-6105 E-ISSN 1573-6113

M

Maleque, Md. Abdul (2000) Effect of mechanical factors on tribological properties of palm oil methyl blended lubricant. Wear, 239. pp. 117-125. ISSN 0043-1648

Maleque, Md. Abdul (2017) TIG torch surfacing of nano-particulate hybrid composite layer: development and characterization. In: 1st International Workshop on Multifunctional Materials (IW2M-2017), 10th-12th October 2017, Mostaganem, Algeria. (Unpublished)

Maleque, Md. Abdul (2018) Wear properties of SiC particulate preplaced TIG melted surface layered duplex stainless steel. In: World Summit on Advances in Science, Engineering and Technology (Cambridge Summit 2018), 4th-6th Jan. 2018, Cambridge, United Kingdom. (Unpublished)

Maleque, Md. Abdul and Afiq, Muhammad (2018) Melting of SiC powders preplaced duplex stainless steel using TIG welding. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Hassan, Masjuki and K.O., Low and Ali, Mohammad Yeakub (2021) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November, Universiti Teknologi Brunei ( Virtual ). (Unpublished)

Maleque, Md. Abdul and Idris, Nazrin and Rahman, Mohammad M. and Sayeed Hossain, Mohammad (2020) Particulate composite protective coating using conventional melting approach. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 510-516. ISBN 9780128035818

Maleque, Md. Abdul and Lailatul, H. and Bello, K.A. and Azwan, M. (2016) Lubricated wear behaviour of SiC reinforcement on TI-6AL-4V alloy based on Taguchi approach. In: 4th Malaysia-Japan Tribology Symposium 2016, 25th-26th August 2016, Universiti Teknologi Malaysia. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2018) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation. ISSN 1757-2754 E-ISSN 1757-2762 (In Press)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2019) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754 E-ISSN 1757-2762

Maleque, Md. Abdul and Sarifuddin, Norshahida and Haji Hassan, Masjuki and Rahman, M. M. (2022) Recent advances in hybrid coating on metallic materials using liquid additive manufacturing. In: International Conference on Mechanical Engineering (ICME 2022), 16-19 February 2022, Lahore, Pakistan.

Maleque, Md. Abdul and Shaha, Sugrib Kumar and Razali, Nurul Nadirah (2018) Wear behavior of aluminium modified cast iron in comparison with conventional gray cast iron. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-7. ISBN 978-0-12-803581-8 (In Press)

Mamat, M. Azwan and Maleque, Md. Abdul and Rahman, Md Mustafizur (2019) TIG torch surfacing of metallic materials – a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 0020-2967 E-ISSN 1745-9192

Masjuki, H.H. and Gulzar, M. and Kalam, M. A. and M. Zulkifli, N. W. and Maleque, Md. Abdul (2023) Engine tribology enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings - Technologies and Applications. CRC Press, Tailor & Francies Group LLC, pp. 221-254. ISBN 9781032038575

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2021) The effect of working distances on the formation of TiC composite surface hardening using TIG melting technique. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Md Idriss, A. N. and Kasolang, S. and Maleque, Md. Abdul (2022) Literature survey on manufacturing alumina/aluminum MMC by stir casting and their wear behaviors with and without solid lubrication. In: 3rd Malaysian International Tribology Conference, 28-30 September 2020, Virtual.

Md Idriss, A. N. and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Md Nasir, Ramdziah and Mridha, Shahjahan and Baker, T. N. (2016) Microstructural aspects of wear behaviour of TiC coated low alloy steel. Materials Science and Technology, 32 (4). pp. 303-307. ISSN 0267-0836 E-ISSN 1743-2847

Md Idriss, Ahmed Nazrin and UNSPECIFIED and Maleque, Md. Abdul (2022) Demographic changes by the vickers microhardness surface indentations on the TiC metal matrix composite TIG melted track. In: 3rd Malaysian International Tribology Conference, 28-30 September 2020, Virtual.

Mohd Yusoff, Marmeezee and Mamat, Mohamad Hafiz and Abdullah, Mardhiah and Ismail, Ahmad Syakirin and Malek, Mohd Firdaus and Zoolfakar, Ahmad Sabirin and Al Junid, Syed Abdul Mutalib and Abu Bakar, Suriani and Mohamed, Azmi and Ahmad, Mohd Khairul and Shameem Banu, Itreesh Basha and Rusop, Mohamad (2020) Coupling heterostructure of thickness-controlled nickel oxidenanosheets layer and titanium dioxide nanorod arrays via immersionroute for self-powered solid-state ultraviolet photosensor applications. Measurement: Journal of the International Measurement Confederation, 149. pp. 1-11. ISSN 0263-2241 E-ISSN 1873-412X

Mt Aznam, Suazlan and Maruoka, Naru and Imai, Ryosuke and Mori, Shoji (2021) Process of liquid supply to heated surface by a honeycomb porous plate for critical heat flux enhancement. Journal of Thermal Science and Technology, 16 (3). pp. 1-17. ISSN 1880-5566 E-ISSN 1880-5566

Musa, Mukhtaruddin Iqbal A. and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

P

Paijan, Lailatul Harina and Maleque, Md. Abdul (2018) Tribological properties of surface coated duplex stainless steel containing SiC ceramic particles. Jurnal Tribologi, 18. pp. 136-148. E-ISSN 2289-7232

Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles. In: The 5th International Conference and Exhibition On Energy and Advanced Materials (ICE-SEAM2017), 16th-19th Oct. 2017, Melaka.

Paijan, Lailatul Harina and Maleque, Md. Abdul and Abu Bakar, Mohd Hadzley and Mamat, Mohd Fauzi and Osman, Mohd Hairizal and Rosli, Nor Ana and Asari, Mohd Rashidi (2023) Influence of microstructure on the hardness behavior of AISI duplex-2205 composite layer by TIG cladding. Malaysian Journal of Microscopy, 19 (1). pp. 118-128. ISSN 1823-7010 E-ISSN 2600-7444

Paijan, Lailatul Harina and Maleque, Md. Abdul and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley (2022) Effects of temperature on the formation of nitride surface layer via thermochemical gaseous nitriding process. Malaysian Journal of Microscopy, 18 (2). pp. 122-131. E-ISSN 26007444

Paruka, Perowansa and Maleque, Md. Abdul and Md Shah, Md Kamal (2014) Performance of hybrid aluminium–composite columnar tube under axial crush force. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur. (Unpublished)

Parveez, Bisma and Jamal, Nur Ayuni and Md. Abdul, Maleque and Yusof, Farazila and Jamadon, Nashrah Hani and Syed Abu Bakar, Sharifah Adzila (2021) Review on advances in porous Al composites and the possible way forward. Journal of Materials Research and Technology, 14. pp. 2017-2038. ISSN 2238-7854 E-ISSN 2214-0697

Parveez, Bisma and Maleque, Md. Abdul and Jamal, Nur Ayuni Jamal (2021) Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. Journal of Materials Science, 56. pp. 16195-16222. ISSN 0022-2461 E-ISSN 1573-4803

R

Reddy, M. Mohan and Gorin, Alexander and Abou-El-Hossein, Khaled and Debnath, Sujan and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2012) Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts. Advanced Materials Research, 576. pp. 76-79. ISSN 1022-6680

S

S.Y., Cetin and Md. Abdul, Maleque and Hassan, Masjuki and A., Hamdan (2022) Wear simulation of automotive engine component materials under biodiesel. Journal of Mechanical Engineering and Sciences (JMES), 16 (4). 9167 - 9174. ISSN 2289-4659 E-ISSN 2231-8380

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) Effect of water absorption on mechanical properties of sugar palm fibre reinforced sugar palm starch (spf/sps) biocomposites. Journal of Biobased Materials and Bioenergy, 6 (6). pp. 1-5. ISSN 1556-6560

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) Sugar palm tree: a versatile plant and novel source for biofibres, biomatrices, and biocomposites. Polymers from Renewable Resources, 3 (2). pp. 61-77.

Saleh, Tanveer and Moghaddam, Mehran Vahdani and Mohamed Ali, Muhamed Sultan and Dahmardeh, Masoud and Foell, Charles Alden and Nojeh, Alireza and Takahata, Kenichi (2012) Transforming carbon nanotube forest from darkest absorber to reflective mirror. Applied Physics Letter, 101 (6). 061913-1. ISSN 1077-3118 (O), 0003-6951 (P)

Sapuan, S. M. and Maleque, Md. Abdul (2005) Design and fabrication of natural woven fabric reinforced epoxy composite for household telephone stand. Materials and Design, 26 (1). pp. 65-71. ISSN 0261-3069

Sapuan, S.M. and Harimi, M. and Maleque, Md. Abdul (2003) Mechanical properties of epoxy/coconut shell filler particle composites. Arabian Journal for Science and Engineering, 28 (2B). pp. 171-181. ISSN 1319-8025

Saputra, Hens and Othman, Raihan and Sutjipto, Agus Geter Edy and Muhida, Riza and Ani, Mohd Hanafi (2012) Gel-like properties of MCM-41 material and its transformation to MCM-50 in a caustic alkaline surround. Materials Research Bulletin, 47 (3). pp. 732-736. ISSN 0025-5408

U

Urmi, Wajiha Tasnim and A.S, Shafiqah and Rahman, Md Mustafizur and Maleque, Md. Abdul and Kadirgama, Kumaran (2021) Preparation methods and challenges of hybrid nanofluids: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2). pp. 56-66. E-ISSN 2289-7879

Urmi, Wajiha Tasnim and Rahman, Md. Mustafizur and Wan Hamzah, Wan Azmi and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2020) Experimental investigation on the stability of 40% ethylene glycol based TiO2-Al2O3 hybrid nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879