Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications

Paijan, Lailatul Harina and Maleque, Md. Abdul and Adeyemi, Bello Kamilu and Mamat, Mohd Fauzi and Hussein, Nur Izan Syahriah (2023) Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. Jurnal Tribologi, 37. pp. 15-28. E-ISSN 2289-7232

Preview	PDF (SCOPUS) - Supplemental Material Download (133kB) | Preview
Preview	PDF (Article) - Published Version Download (862kB) | Preview

Abstract

The objective of the present study is to deposit highly wear resistant silicon carbide (SiC) ceramic particles on Duplex-2205 using tungsten inert gas (TIG) torch arc cladding at a heat input of 480 J/mm. The influence of various SiC ceramic particles size ranging from 20 µm to 100 µm on microstructure, hardness and linear motion reciprocating wear test was studied. Scanning electron microscopy (SEM) and microhardness tester were used to characterize the influence of SiC particle size on duplex stainless steel (DSS). The tribological properties of the cladding layer was examined using a ball-on-disc tribometer. It was found that the hardness properties for 60 µm and 100 µm samples were generally higher than 20 µm and this was believed owing to the presence of the dendrite microstructure. Furthermore, it was found that wear rate and friction coefficient of larger particle size produced better wear resistance. The tribological properties of the clad layer were increased further due to the well dispersion of the dendrites structure in the SiC-DSS layer. The strongest clad layer consisted of 100 µm SiC particle size and had a hardness value of 750 Hv, wear rate of 4.13 mm3/Nm and friction coeficient of 0.49.

Item Type:	Article (Journal)
Additional Information:	6103/102639
Uncontrolled Keywords:	SiC ceramic particles, Tribological, Duplex stainless Steel, Hardness, Wear
Subjects:	T Technology > T Technology (General) > T11.95 Industrial directories T Technology > TA Engineering (General). Civil engineering (General) > TA401 Materials of engineering and construction T Technology > TN Mining engineering. Metallurgy > TN600 Metallurgy T Technology > TS Manufactures > TS200 Metal manufactures. Metalworking
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User:	Prof Dr. Md Abdul Maleque
Date Deposited:	10 Oct 2023 15:48
Last Modified:	03 Jan 2024 10:28
URI:	http://irep.iium.edu.my/id/eprint/105358

Available Versions of this Item

• Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. (deposited 10 Jan 2023 11:50)
  • Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. (deposited 10 Oct 2023 15:48) [Currently Displayed]

Actions (login required)

View Item