IIUM Repository (IREP)

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA349 Mechanics of engineering. Applied mechanics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Jump to: A | B | C | E | F | H | K | L | M | O | P | R | S | T | U | W | Y | Z
Number of items at this level: 59.

A

A. Rahim, Syazwani and Abdul Muthalif, Asan Gani and Turahim, Khairiah K. (2012) Active vibration isolation system for free space optic communication: virtual prototyping using LabVIEW-SolidWorks. Applied Mechanics and Materials, 105/7. pp. 733-737. ISSN 1660-9336

Abdul Muthalif, Asan Gani (2012) Optimal damper location for mid-high frequency vibration control on built-up structures: case study using VA one. Applied Mechanics and Materials, 105/7. pp. 705-709. ISSN 1660-9336

Abdul Muthalif, Asan Gani and Salami, Momoh Jimoh Emiyoka and Khan, Md. Raisuddin (2006) Compensated inverse pid controller for active vibration control with piezoelectric patches: modeling, simulation and implementation. IIUM Engineering Journal, 7 (2). pp. 43-59. ISSN 1511-788X

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2014) Derivation of stress intensity factor for a cracked plate with an integrated piezoelectric actuator. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Akhtaruzzaman, Md. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Automated threshold detection for object segmentation in colour image. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4100-4104. ISSN 1819-6608

Akhtaruzzaman, Md. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Representation of human gait trajectory through temporospatial image modelling. ARPN Journal of Engineering and Applied Sciences Open Access, 11 (6). pp. 4105-4110. ISSN 1819-6608

Ali, Mohammad Yeakub (2009) Fabrication of microfluidic channel using micro end milling and micro electrical discharge milling. International Journal of Mechanical and Materials Engineering (IJMME), 4 (1). pp. 93-97. ISSN 1823-0334

Alsubari, Saleh and Mohamed Ali, Jaafar Syed and Aminanda, Yulfian (2015) Hygrothermoelastic analysis of anisotropic cylindrical shells. Composite Structures, 131. pp. 151-159. ISSN 0263-8223

Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Effect of temperature and moisture dependent material properties on the bending behavior of laminated cylindrical shell under hygrothermal loads. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July 2016, Kuala Lumpur, Malaysia.

Altalmas, Tareq, M. and Jamil, Muhammad Ammar and Ahmad, Salmiah and Sediono, Wahju and Salami, Momoh Jimoh Eyiomika and Shahbudin Hassan, Surul and Embong, Abdul Halim (2017) Lips tracking identification of a correct Quranic letters pronunciation for tajweed teaching and learning. IIUM Engineering Journal, 18 (1). pp. 177-191. ISSN 1511-788X

Aminanda, Yulfian and Castanie, Bruno and Barrau, Jean-Jacques and Thevenet, Pascal (2009) Experimental and numerical study of compression after impact of sandwichs structures with metallic skins. Composites Science and Technology, 69 (1). pp. 50-59. ISSN 0266-3538

B

Bhuiyan, Md. Moinul Islam and Haga, Yoichi and Esashi, Masayoshi (2004) Large displacement optical switching mechanism using SMA microactuator and magnetic latch. In: 17th IEEE International Micro Electro Mechanical Systems Conference, Jan 2004, Holland.

Bhuiyan, Moinul and Alamgir, Tarik Bin and Rashid, Muhammad Mahbubur (2014) Development and optimization of a low normal force contact. Advanced Materials Research, 939. pp. 647-654. ISSN 1022-6680

Bhuiyan, Moinul and Takemasa, Eiichiro and Bhuiyan, Munira (2013) LNF Micro-Contact using MEMS and EFF Technology. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013, 19-20th February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM.

C

Castanie, Bruno and Aminanda, Yulfian and bouvet, christophe and barrau, jean-jacques (2008) Core crush criterion to determine the strength of sandwich composite structures subjected to compression after impact. Composite Structures, 32 (3). pp. 1-8. ISSN S0263-8223(08)00086-X

E

Eshteyah, Mohanna and Hrairi, Meftah (2016) Multi-objective optimization of clinching joints quality using Grey-based Taguchi method. The International Journal of Advanced Manufacturing Technology, 87. pp. 233-249. ISSN 0268-3768

Eshteyah, Mohanna and Hrairi, Meftah and Mohiuddin, A. K. M. (2016) Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology, 82 (1-4). pp. 179-195. ISSN 0268-3768

Eshteyah, Mohanna and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim and Mohiuddin, A. K. M. (2015) Finite element modeling of clinching process for joining dissimilar materials. Advanced Materials Research, 1115. pp. 109-112. ISSN 1022-6680

F

Faris, Waleed Fekry and Mohyuddin, Muhammad Raheel and Ismail, Ahmad Faris (2009) Fundamentals of fluid mechanics. IIUM Press, Kuala Lumpur. ISBN 9789833855889

H

Hanafi, Muhammad Muaz and Bhuiyan, Moinul (2014) Two degree of freedom plotter using robotic arm. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23-25 September 2014, Kuala Lumpur. (In Press)

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Putra, Azma and Ismail, Ahmad Faris (2014) Prediction of waste heat energy recovery performance in a naturally aspirated engine using artificial neural network. ISRN Mechanical Engineering. 240942-1-6.

Hrairi, Meftah and Rizk, Abd El-Fattah (2014) Edge Crack, Bimaterial Systems. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1085-1092. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

Hussain, Zakia and Zainul Azlan, Norsinnira (2016) KANE’S method for dynamic modeling. In: 2016 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 22nd October 2016, Shah Alam.

K

Karim, A.N. Mustafizul and Puyane, R. and El-Baradie, M.A and Hashmi, M. S. J. (1995) Effect of compaction parameters on the physical properties of zinc oxide varistor discs. In: International Conference on Mechanics of Solids and Materials Engineering, 8-10 June 1995, Singapore.

L

Labanieh, Mohamad Fateh and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim (2016) Optimal location of piezoelectric patches For active vibration control. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur. (Unpublished)

M

M. H., Latif and H., Md. Yusof and Toha, Siti Fauziah (2016) mathematical modelling and development of a monoball robot for educational purpose. Malaysian Journal of Mathematical Sciences, 10. pp. 265-275. ISSN 1823-8343

Mohamed Ali, Jaafar Syed (2015) Thermoelastic slutions for flexure of anisotropic cylindrical shells. Advanced Materials Research, 1115. pp. 564-567. ISSN 1022-6680

Mohamed Ali, Jaafar Syed and Abeid Abeid , Rubeya (2015) LEADME : an educational software for composite laminate analysis and design. Advanced Materials Research, 1115. pp. 578-581. ISSN 1022-6680

Mohamed Ali, Jaafar Syed and Sadeq, Tazkera (2012) Development of educational software for stress analysis of an aircraft wing. Journal of Engineering Science and Technology , 7 (3). pp. 322-338. ISSN 1823-4690

O

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Guidance, navigation and control for satellite proximity operations using Tschauner-Hempel equations. In: AIAA Guidance, Navigation, and Control Conference, 8-11 August 2011, Portland, Oregon.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2010) Relative motion and autonomous rendezvous in Keplerian elliptic orbits. In: AIAA Guidance, Navigation, and Control Conference, 2-5 August 2010, Toronto, Ontario Canada.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2014) Relative motion guidance, navigation and control for autonomous orbital rendezvous. Journal of Aerospace Technology and Management, 6 (3). pp. 301-318. ISSN 1984-9648, 2175-9146

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Relative motion guidance, navigation and control for autonomous orbital rendezvous. In: AIAA Guidance, Navigation, and Control Conference, 8-11 August 2011, Portland, Oregon.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Relative motion guidance, navigation and control for autonomous spacecraft rendezvous. In: Proceedings of the 21st AAS/AIAA Space Flight Mechanics Meeting, 13-17 February 2011, New Orleans, Louisiana.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2009) Switching algorithm to avoid attitude representation singularity. In: AIAA Atmospheric Flight Mechanics Conference, 10-13 August 2009, Chicago, Illinois.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2010) Switching principles to circumvent Euler angle singularity. In: AIAA/AAS Astrodynamics Specialist Conference, 2-5 August 2010, Toronto, Ontario Canada.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Park, Chandeok and Park, Sang-Young (2013) Autonomous multi satellites assembly in keplerian orbits. In: AIAA Guidance, Navigation, and Control (GNC) Conference, 19-22 August 2013, Boston, Massachusetts.

P

Prawoto, Yunan and Djuansjah, J.R.P. and Shaffiar, Norhashimah (2012) 3D modeling of austenite based on real microstructure. In: 4th International Conference on Computational Methods (ICCM2012), 25th-28th Nov. 2012, Crown Plaza Surfers Paradise, Gold Coast, Australia. (Unpublished)

R

Rashmi, W. and Ismail, Ahmad Faris and Khalid, M. and Anuar, A. and Yusaf, T. (2014) Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids. Journal of Materials Science, 49 (13). pp. 4544-4551. ISSN 1573-4803 (O), 0022-2461 (P)

Rashmi, W. and Khalid, M. and Ismail, Ahmad Faris and Saidur, R. and Rashid, A. K. (2013) Experimental and numerical investigation of heat transfer in CNT nanofluids. Journal of Experimental Nanoscience. pp. 1-19. ISSN 1745-8099

Rejab, Nik Akmar and Ahmad Azhar, Ahmad Zahirani and Ratnam, Mani Maran (2016) Role of MgO nanoparticles on zirconia-toughened alumina-5 wt-% CeO2 ceramics mechanical properties. Materials Science and Technology, 32 (13). pp. 1316-1322. ISSN 0267-0836

Rizk, Abd El-Fattah and Hrairi, Meftah (2014) Edge crack, composite materials. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1092-1100. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

Rizk, Abd El-Fattah and Hrairi, Meftah (2014) Edge crack, isotropic material. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1100-1109. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

S

Saleh, Tanveer (2004) Design of a gyroscopically stabilized single-wheeled robot. In: Conference on Robotics, Automation and Mechatronics, 1 - 3 December 2004, Singapore.

Shaffiar, Norhashimah and Laib, Z. B. and Tam, M. N. (2011) Damage mechanics model for solder/intermetallics interface fracture process in solder joints. Key Engineering Materials, 462-63. pp. 1409-1414. ISSN 1013-9826

Shaffiar, Norhashimah and Loh, W.K. and Kamsah, N. and Tamin, M.N. (2010) Continuum damage evolution in pb-free solder joint under shear fatigue loadings. In: 12th Electronics Packaging Technology Conference, 8th - 10th December 2010 , Singapore .

Shaffiar, Norhashimah and Loh, W.K. and Kamsah, N. (2010) Progressive damage in Sn-4Ag-0.5Cu solder joints during flexural fatigue of a BGA package. In: 34th International Electronics Manufacturing Technology Conference (IEMT 2010), 30th - 2nd November 2010 , Melaka.

Syed Mohamed Ali, Jaffar and Abeid Abeid , Rubeya (2014) LEADME : an educational software for composite laminate analysis and design. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Syed Mohamed Ali, Jaffar and Alsubri, Saleh and Aminanda, Yulfian (2015) A higher order theory for bending of cross ply laminated cylindrical shell under hygrothermal loads. Advanced Materials Research, 1115. pp. 509-512. ISSN 1022-6680

Syed Muhammad, Kashif (2012) Delamination effect modeling, simulation and experimental validation of lap shear test. International Journal of Mechanical and Materials Engineering (IJMME), 7 (3). pp. 177-185. ISSN 1823-0334

Syed Muhammad, Kashif (2011) Introduction of piecewise virtual fields method for solution of inverse problems. In: Advanced Numerical Technologies in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 253-294. ISBN 978-967-180-020-1

T

Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Tamin, M.N. and Shaffiar, Norhashimah (2014) Solder joint reliability assessment: finite element simulation methodology. Advanced Structured Materials Series, 37 . Springer International Publishing, Switzerland. ISBN 978-3-319-00091-6, 978-3-319-00092-3 (eBook)

Tamin, M.N. and Shaffiar, Norhashimah and Z., B. Lai and W., K. Loh (2012) Fatigue fracture process of lead-free solder joints in BGA package. In: Recent trends in fracture mechanics. Materials Science and Technologies, Mechanical Engineering Theory and Applications . Nova Science Publishers, pp. 247-268. ISBN 978-1-61470-615-1

U

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Rahman, M T and Hossain, Belayet and Salam, S M and Nithe, N A (2015) Custom MPPT design of solar power switching network for racing car. In: 2015 18th International Conference on Computer and Information Technology (ICCIT), 21st-23rd December 2015, Dhaka, Bangladesh.

Uddin, Md. Nasir and Rashid, Muhammad Mahbubur and Rubaiyat, M and Hossain, Belayet and Salam, S M and Nithe, N A (2015) Comparison of position sensorless control based back-EMF estimators in PMSM. In: 2015 18th International Conference on Computer and Information Technology (ICCIT), 21st-23rd December 2015, Dhaka, Bangladesh.

W

Wan Abdul Hamid, Wan Luqman Hakim and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim (2013) Experimental Investigation on the Energy Absorption Capability of Foam-filled Nomex Honeycomb Structure. Applied Mechanics and Materials, 393. pp. 460-466. ISSN 1660-9336

Y

Yamin, A.F.M. and Shaffiar, Norhashimah and Loh, W.K. and Tamin, M.N. (2011) Damage progression in BGA solder joints during board-level drop test. In: 13th Electronics Packaging Technology Conference (EPTC 2011), 7th - 9th December 2011 , Singapore.

Z

Zahran, Mohamed and Okasha, Mohamed Elsayed Aly Abd Elaziz and Ivanova, Galina A. (2006) Assessment of earth remote sensing microsatellite power subsystem sapability during detumbling and nominal modes. Journal of Power Electronics, 6 (1). pp. 18-28. ISSN 1598-2092

This list was generated on Mon Sep 25 01:28:22 2017 +08.