Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA329 Engineering mathematics. Engineering analysis"

Article

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2019) Effect of bonded composite patch on the stress intensity factor for a center cracked plate. IIUM Engineering Journal, 20 (2). pp. 211-221. ISSN 1511-788X E-ISSN 2289-7860

Ahmad, Kartini and Mat Isa, Siti Suzilliana Puteri and Wahid, Zaharah and Hanouf, Zahir (2021) The impact of newtonian heating on magnetic casson nanofluid flow with variable consistency over a variable surface thickness. Magnetohydrodynamics, 57 (3). pp. 291-303. ISSN 0024-998X E-ISSN 1574-0579

Al Mahmud, Suaib and Ismail, Ahmad Faris (2021) Multiphase CFD investigation on convective heat transfer enhancement for turbulent flow of water-Al2O3Nanofluid. CFD Letters, 13 (10). pp. 11-24. ISSN 2180-1363

Alam, Mohammad Shafiul and Rashid, Muhammad Mahbubur and Faizabadi, Ahmed Rimaz and Mohd Zaki, Hasan Firdaus and Alam, Tasfiq E. and Ali, Md Shahin and Gupta, Kishor Datta and Ahsan, Md Manjurul (2023) Efficient deep learning-based data-centric approach for autism spectrum disorder diagnosis from facial images using explainable AI. Technologies, 11 (5). pp. 1-27. E-ISSN 2227-7080

Ang, Christopher Yew Shuen and Chiew, Yeong Shiong and Wang, Xin and Ooi, Ean Hin and Mat Nor, Mohd Basri and Cove, Matthew E. and Chase, J. Geoffrey (2024) Exploring variable observational time windows for patient–ventilator asynchrony during mechanical ventilation treatment. IFAC Journal of Systems and Control, 29. ISSN 2468-6018

Bilal, Sara Mohammed Osman Saleh and Munir, Fatin and Karbasi, Mostafa (2016) Blood vessels segmentation based on three retinal images datasets. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 387-395. ISSN 1819-6608

Che Azemin, Mohd Zulfaezal and Abdul Gaffur, Norfazrina and Hilmi, Mohd Radzi and Mohd Tamrin, Mohd Izzudin and Mohd. Kamal, Khairidzan (2016) Benchmarked pterygium images for human and machine graders. Journal of Engineering and Applied Sciences, 11 (11). pp. 2378-2382. ISSN 1816-949X

Daud, Rosdi and A., Asyraf and Hassan, Mas Ayu and A., Shah and Tomadi, Dr. Siti Haryani (2020) Investigation on pullout strength between different design of cannulated pedicle screw and osteoporosis bones to obtain an optimum design. TEST Engineering & Management, 83 (May/June). pp. 1097-1103. ISSN 0193-4120

Daud, Rosdi and Almor, A. A. and Hassan, Mas Ayu and M. Safwan, M. Safwan and Shah, A and Tomadi, Siti Haryani (2020) Design optimization of lightweight lower control arm using finite element method. Test Engineering & Management, May - June 2020. pp. 1285-1291. ISSN 0193-4120

Ehteram, Mohammad and Banadkooki, Fatemeh Barzegari and Fai, Chow Ming and Moslemzadeh, Mohsen and Sapitang, Michelle and Ahmed, Ali Najah and Irwan, Dani and El-Shafie, Ahmed (2021) Optimal operation of multi-reservoir systems for increasing power generation using a seagull optimization algorithm and heading policy. Energy Reports, 7. pp. 3703-3725. ISSN 2352-4847

Hong, Jer Lang and Ibrahim, Izihan and Jafri, Azmi and Shafie, Suzana and Naubi, Irena (2018) Temporal distribution of heavy rainfall for upper Klang catchment. Advanced science and technology letters, 151. pp. 25-30. E-ISSN 2287-1233

Hong, Jer Lang and Md Jafri, Azmi and Ibrahim, Izihan and Shafie, Suzana and Hong, Kee An and Naubi, Irena (2018) Design rainfall temporal patterns for upper Klang catchment. The Journal of the Institution of Engineers, Malaysia, 79 (1). pp. 21-30. ISSN 0126-513X

Jaafar, Muhammad Imran and Rabah, Hossameldin M.M.M. and Nordin, Nor Hidayati Diyana and Abdul Muthalif, Asan Gani and Wahid, Azni Nabela (2021) Voltage generation in piezoelectric energy harvesting with magnet: FEA simulation and experimental analysis. Journal of Science and Technology, 13 (2). pp. 17-24. ISSN 2229-8460 E-ISSN 2600-7924

Mat Isa, Siti Suziliana Puteri and Parvin, Shanaz and M. Arifin, Norihan and M. Ali, Fazilah and Ahmad, Kartini (2023) Soret-Dufour effects on the waterbased hybrid nanofluid flow with nanoparticles of alumina and copper. Malaysian Journal of Mathematical Sciences, 17 (3). pp. 283-304. ISSN 1823-8343 E-ISSN 2289-750X

Mohamed Azmin, Nor Fadhillah and Mohamed Sharikh, Atikah and Shari, Ummi S. Halmi and Azmi, Azlin Suhaida (2015) Growth of mutant synechococcus SP. PCC 7002: effects of multi-parameters and prediction of growth rate. Journal of Tropical Resources and Sustainable Science, 3. pp. 174-179. ISSN 2289-3946

Mohamed Noor, Noraini and Othman, Raihan and Mohd Hatta, Maziati Akmal and Ani, Mohd Hanafi (2014) Determination of linear tafel region from piecewise linear regression analysis. International Journal of Electroactive Materials, 2. pp. 22-27. ISSN 2289-179X

Mohamed Yusof, Fauzi and Musiliu Folarin, Farayola (2023) Modeling the transmission dynamics of Hantavirus infection under the effect of vaccination and other optimal controls. Menemui Matematik, 45 (1). pp. 56-75. ISSN 2231-7023

Mohd Kazim, Mohd Nor Fakhzan and Raman, Selvanayakan and Shafie, Muhammad Hafiz and Mohd Nasir, Nashrul Fazli and Abdul Muthalif, Asan Gani (2014) A complete system modelling of Piezoelectric Energy Harvester (PEH) with Silicon Carbide (SiC) Used as cantilever base. Jurnal Teknologi (Sciences and Engineering), 69 (8). pp. 47-52. ISSN 2180–3722 (O), 0127–9696 (P)

Mukhtar, Azfarizal and Yusoff, Mohd Zamri and Ng, Khai Ching and Mohamed Nasir, Mohamed Fariz (2018) Application of Bbox-Behnken design with response surface to optimize ventilation system in underground shelter. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (2). pp. 161-173. ISSN 2289-7879

Ng, Khai Ching and Ng, Y.L. and Sheu, Tony Wen Hann and Mukhtar, Azfarizal (2019) Fluid-solid conjugate heat transfer modelling using weakly compressible smoothed particle hydrodynamics. International Journal of Mechanical Sciences, 151. pp. 772-784. ISSN 0020-7403

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2014) Relative motion guidance, navigation and control for autonomous orbital rendezvous. Journal of Aerospace Technology and Management, 6 (3). pp. 301-318. ISSN 1984-9648 E-ISSN 2175-9146

Olanrewaju, Rashidah Funke and Khan, Burhan Ul Islam and Goh, Khang Wen and Hassan Abdalla Hashim, Aisha and Sidek, Khairul Azami and Khan, Zuhani Ismail and Daniyal, Hamdan (2022) A holistic architecture for a sales enablement sensing-as-a-service model in the IoT environment. Information, 13 (11). pp. 1-22. ISSN 2078-2489

Utami, Bernadhita H. S and Warsono, Dian Kurniasari and Usman, Mustofa and Elfaki, Faiz Ahmed Mohamed (2014) Generalized method of moments' characteristics and its application on paneldata. Science International Lahore, 26 (3). pp. 985-990. ISSN 1013-5316

Wahid, Zaharah and Za'bah, Nor Farahidah and Ahmad, Kartini and Yasin, Nabila Huda (2015) Experimental study on potential use of photochromic thin film as energy harvester. Australian Journal of Basic and Applied Sciences, 9 (28(S)). pp. 45-49. ISSN 1991-8178

Yosra, Yousif and Elfaki, Faiz Ahmed Mohamed and Hrairi, Meftah (2016) Analysis of partly interval-censored data under competing risks framework. International Journal of Computer Science and Network Security, 16 (8). pp. 25-28. ISSN 1738-7906

Zahran, Mohamed and Okasha, Mohamed Elsayed Aly Abd Elaziz and Ivanova, Galina A. (2006) Assessment of earth remote sensing microsatellite power subsystem sapability during detumbling and nominal modes. Journal of Power Electronics, 6 (1). pp. 18-28. ISSN 1598-2092

Zeki, Akram M. and Abdul Manaf, Azizah and Adamu, Abubakar Ibrahim and Zamani, Mazdak (2011) A robust watermark embedding in smooth areas. Research Journal of Information Technology, 3 (2). pp. 123-131. ISSN 1815-7432

Book

Hasbullah, Faried and Mt Aznam, Suazlan and Manshor, Hanisah, eds. (2017) Proceedings of The 4th International Conference on Mathematical Applications in Engineering 2017. IIUM, Kuala Lumpur. ISBN 978-983-42978-9-3

Book Chapter

Ahmad, Kartini and Mohamed Isa, Siti Suzilliana Putri (2019) The exponential variation of heated extending sheet in Casson fluid flow. In: Embracing Mathematical Diversity: Selected papers from Seminar on Mathematical Sciences 2019 (SOMS2019). UPM PRESS, Serdang, Selangor, pp. 59-66. ISBN 978-967-2395-08-9

Proceeding Paper

Abdul Aziz, Mohammad and Al-khulaidi, Rami Ali and Rashid, Muhammad Mahbubur and Islam, Mohammad Rofiqul and Rashid, Mamunur A.N. (2017) Design and fabrication of a fixed-bed batch type pyrolysis reactor for pilot scale pyrolytic oil production in Bangladesh. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abdul Rahman, Muhammad Taqiuddin and Ahmad, Salmiah and Akmeliawati, Rini and Altalmas, Tareq, M. and Aula, Abqori (2013) Centre of Gravity (C.O.G)-based analysis on the dynamics of the extendable Double-Link Two-Wheeled Mobile Robot. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (In Press)

Adnan, Nur Adani and Ibrahim, Izihan and Ibrahim, Saerahany Legori (2021) Flow-3D CFD model of bifurcated open channel flow: setup and validation. In: 9th International Symposium on Environmental Hydraulics, 19th-22 July 2021, Seoul, Korea. (Unpublished)

Ahmad, Kartini and Wahid, Zaharah (2015) Jeffrey fluid flow and heat transfer past a stretching sheet with Ohmic dissipation. In: 2015 Global Engineering & Applied Science Conference (GEASC 2015), 2nd-4th Dec. 2015, Tokyo, Japan.

Aissa, Foughalia and Abdul Rahim, Rosminazuin and Nordin, Anis Nurashikin and Ibrahim, Siti Noorjannah (2015) Simulation of an hybrid blood cells micro-separator. In: 2015 IEEE Regional Symposium on Micro and Nanoelectronics (IEEE-RSM2015), 19th-21st August 2015, Kuala Terengganu, Malaysia.

Altalmas, Tareq, M. and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im and Aula, Abqori (2013) Mechanical design and simulation of wwo-Wheeled wheelchair using solidworks. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (In Press)

Altalmas, Tareq, M. and Aula, Abqori and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im (2013) Integrated design, modeling and analysis of a two-wheeled wheelchair for disabled. In: IIUM Research, Invention and Innovation Exhibition 2013, 19 - 20 February 2013, Cultural Activity Centre (CAC) and KAED Gallery, IIUM. (Unpublished)

Aula, Abqori and Akmeliawati, Rini and Ahmad, Salmiah (2013) Towards port-hamiltonian approach for modeling and control of two-wheeled wheelchair. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July, 2013,, Kuala Lumpur, Malaysia. (Unpublished)

Aula, Abqori and Altalmas, Tareq M. and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im (2013) Integrated design, modelling and analysis of two-wheeled wheelchair for disabled. In: 16th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR’13), 14 – 17 July 2013, Sydney, Australia.

Azram, Mohammad (2015) Helicity as isotopy invariant. In: Tenth TheIIER International Conference, 12 February 2015, Kuala Lumpur.

Azram, Mohammad (2014) Topological algebra via inner product. In: International Conference on Mathematics Application in Engineering 2014, 23 - 25 September 2014, Kuala Lumpur. (Unpublished)

Bilal, Sara Mohammed Osman Saleh and Akmeliawati, Rini (2015) The impact of geometric and motion features on sign language translators. In: 9th International Conference on Computer Engineering and Applications (CEA '15), 22th - 24th Feb 2015, Dubai, United Arab Emirates.

Che Mustapha, Nurul Arfah and Mohd Fekry, Amira Nasirah (2021) Underwater communication system using electronic acoustics. In: 2021 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), Virtual.

Ibrahim, Izihan and Ibrahim, Saerahany Legori and Khan, Sheroz (2020) Flow structures in dividing open channels: a review. In: "3rd International Conference of Water Resources Development and Environmental Protection, ICWRDEP 2019", 12 - 13 Oct 2019, Universitas Brawijaya, Indonesia.

Idres, Moumen and Mohd Nizum, Ahmad Hazwan and Wan Mohamad Fathi, Wan Muhammad Adam and Okasha, Mohamed Elsayed Aly Abd Elaziz (2021) Optimization of fuel economy for a multimode plug-in hybrid electric vehicle. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22-23 Jun 2021, Virtual. (Unpublished)

Idres, Moumen and Saiful Azmi, Muhamad Adi Muqri (2021) Computational prediction of the performance map of a transonic axial flow compressor. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Ismail, Ismah Zakirah and Che Mustapha, Nurul Arfah (2021) Dynamic position control for unmanned small vehicle (application for vessel). In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE), Virtual.

Ismail, Muhammad Hafizuddin and Islam, Mazharul (2017) CFD analysis of low Reynolds number airfoils using SU2. In: First Biannual Engineering Conference on Undergraduate Research (1st- BiECUR 2017), 17th Jan. 2017, Kuala Lumpur. (Unpublished)

Issoufa, Youssouf Hamidou and Az Eddine, Messikh and Wahiddin, Mohamed Ridza and Umarov, Bakhram A. and Gharib, Subhi Mahmoud Ahmed (2013) Generalized quantum rotation gates using STIRAP. In: The 4th International Conference on Information & Communication Technology for the Muslim World (ICT4M), 25-27 Mar 2013, Rabat, Moroco.

Md Nasir, Muhammad Syamil Tamlikha and Zulkiffli, Kamelia Zahiah and Ghazali, Aimi Shazwani and Jasni, Farahiyah (2024) Physiology vs. Perception paradox: exploring GSR-based and questionnaire stress responses. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Mukhtar, Azfarizal and Yusoff, Mohd Zamri and Ng, Khai Ching (2018) An empirical estimation of underground thermal performance for Malaysian climate. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Nadir, Najiah and Wahid, Zaharah (2014) A Study on Optical Absorption Spectra of Photochromic Dye Using Mixed-Level Factorial Design. In: International Conference on Mathematical Applications in Engineering (ICMAE 2014), 23-25 September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

O. Mohamed, Omar Buseif and Wahid, Azni Nabela (2024) Parametric study on bundled shape memory alloy coils for application in active compression garment. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kulliyyah of Engineering, IIUM.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Guidance, navigation and control for satellite proximity operations using Tschauner-Hempel equations. In: AIAA Guidance, Navigation, and Control Conference, 8-11 August 2011, Portland, Oregon.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2010) Relative motion and autonomous rendezvous in Keplerian elliptic orbits. In: AIAA Guidance, Navigation, and Control Conference, 2-5 August 2010, Toronto, Ontario Canada.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Relative motion guidance, navigation and control for autonomous orbital rendezvous. In: AIAA Guidance, Navigation, and Control Conference, 8-11 August 2011, Portland, Oregon.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2011) Relative motion guidance, navigation and control for autonomous spacecraft rendezvous. In: Proceedings of the 21st AAS/AIAA Space Flight Mechanics Meeting, 13-17 February 2011, New Orleans, Louisiana.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2009) Switching algorithm to avoid attitude representation singularity. In: AIAA Atmospheric Flight Mechanics Conference, 10-13 August 2009, Chicago, Illinois.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2010) Switching principles to circumvent Euler angle singularity. In: AIAA/AAS Astrodynamics Specialist Conference, 2-5 August 2010, Toronto, Ontario Canada.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Park, Chandeok and Park, Sang-Young (2013) Autonomous multi satellites assembly in keplerian orbits. In: AIAA Guidance, Navigation, and Control (GNC) Conference, 19-22 August 2013, Boston, Massachusetts.

Rashmi, W. and Ismail, Ahmad Faris and Asrar, Waqar and Khalid, M. and Yusof, Faridah (2008) Natural convection heat transfer in nanofluids - a numerical study. In: Proceedings of the 7th Symposium on Transport Phenomenon in Manufacturing Processes 2008, August 10–14, 2008, Jacksonville, Florida, USA.

Sallehuddin, Muhammad Syafiq Iskandar and Jasni, Farahiyah and Wahid, Azni Nabela (2022) Development of low-cost sensory system to sort recyclable materials. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 9-10 August 2022, IIUM, Gombak, Kuala Lumpur.

Wahid, Zaharah and Nadir, Najiah (2014) Using design of experiment to evaluate changes to the characteristics of 6-nitroBIPS. In: International Conference on Mathematical Applications in Engineering (ICMAE’14), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Monograph

Asrar, Waqar (2012) Stability of hybrid airships. Research Report. s.n, Kuala Lumpur. (Unpublished)

Yaacob, Ruslina (2017) Mathematics II (MAT0124)- compilation examination questions & probability distributions. Documentation. UNSPECIFIED, Centre for Foundation Studies, IIUM Petaling Jaya, Selangor. (Unpublished)