Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA164 Bioengineering"

Article

-, Gunawan and Sopyan, Iis and Mel, Maizirwan and -, Suryanto (2014) Investigations of the effects of initial Zn concentration and sintering conditions on the phase behavior and mechanical properties of Zn-doped bcp. Advances in Environmental Biology, 8 (3(Spe)). pp. 680-685. ISSN 1995-0756 E-ISSN 1998-1066

-, Gunawan and Sopyan, Iis and Mel, Maizirwan and -, Suryanto (2014) Preparation of zinc doped-biphasic calcium phosphate/carbon nanotube composites. Advances in Environmental Biology, 8 (3(Spe)). pp. 787-791. ISSN 1995-0756 E-ISSN 1998-1066

., Md Nuruzzaman and Al Mamun, Abdullah and Salleh, Md Noor (2017) A brief account of river rehabilitation experiences. IIUM Engineering Journal, 18 (1). pp. 27-41. ISSN 1511-788X E-ISSN 2289-7860

Ab Ghafar, Noor Azlyn and Azmi, Nur Liyana and Md Nor, Khairul Affendy and Nordin, Nor Hidayati Diyana (2022) Classification of muscle fatigue during prolonged driving. ELEKTRIKA, 21 (3, 2022). pp. 40-46. ISSN 0128-4428

Ab Rashid, Mohd Zamzuri and Sidek, Shahrul Na'im (2012) Controller design of unicycle mobile robot. IIUM Engineering Journal, 13 (2). pp. 176-197. ISSN 1511-788X

Abd. Rahim, Nour El Huda and Zulkifly, Ahmad Hafiz and Mohamed, Farahidah and Ku Zaifah, Norsidah (2012) Viscosity and viscoelasticity of osteoarthritic synovial fluids in comparison to intraarticular injection of hyaluronic acid (Synvisc and Suplasyn). Malaysian Orthopaedic Journal, 6 (2sup.A). p. 75. ISSN 1985-2533

Abdul Guthoos, Habibah Farhana and Noorin, Nik Nurfaten and Ismail, Nur Alya Batrisya and Tumian, Afidalina and Wan Salim, Wan Wardatul Amani (2018) Effect of gold nanoparticles and electrode dryingtime on reduced graphene oxide-based compositewith respect topeak current of cyclic voltammetry. ARPN Journal of Engineering and Applied Sciences, 13 (4). pp. 1420-1426. ISSN 1819-6608

Abdul Halim, Amanatuzzakiah and Sulaiman, Suhaili Syafiqah and Nordin, Anis Nurashikin and Hariz, Hikmah Bajunaid (2022) Systematic review study on application of Ion Imprinted polymer (IIP) in heavy metals detection. International Journal of Environmental Analytical Chemistry. pp. 1-26. ISSN 0306-7319 E-ISSN 1029-0397

Abdul Karim, Mohamed Ismail and Jamal, Parveen and Kamaruddin, Noor Izzaida (2014) Kinetic study of acetic acid (vinegar) production from start fruit juice in a bioreactor. Journal of Pure and Applied Microbiology, 8 (Special Issue). pp. 853-857. ISSN 0973-7510

Abdul Rahman, Fariza and Ahmad, Zuraida and Iis, Sopyan (2011) Egg Yolk as pore creating agent to produce porous tri-calcium phosphate for bone implant application. Advanced Materials Research, 265. pp. 760-764. ISSN 1662-8985

Abdullahi, U. and Maleque, Md. Abdul and Nirmal, U. (2013) Wear mechanisms map of CNT-Al nano-composite. Procedia Engineering, 68. pp. 736-742. ISSN 1877-7058

Abu Samah, Norshahida and Amid, Azura and Yusof, Faridah (2011) Over expression of Voltage Dependent Anion Channel 2 (VDAC2) in muscles of electrically stunned chickens. IIUM Engineering Journal, 12 (4). pp. 213-221. ISSN 1511-788X

Adeola-Bello, Zulikha Ayomikun and Zainul Azlan, Norsinnira and Abu Hassan, Salmah Anim (2023) Control strategy forpowerassist upper limb rehabilitation robotwith the therapist’s motion intention prediction. IIUM Engineering Journal, 24 (1). pp. 285-300. ISSN 1511-788X E-ISSN 2289-7860

Adewale, Ahmed Idris and Mirghani, Mohamed Elwathig Saeed and Muyibi, Suleyman Aremu and Daoud, Jamal Ibrahim and Abimbola, Mikail Maryam (2012) Anti-bacterial and cytotoxicity properties of the leaves extract of nahar (Mesua Ferrea) plant. Advances in Natural and Applied Sciences, 6 (5). pp. 583-587. ISSN 1995-0772

Adinurani, Praptiningsih G. and Setyobudi, Roy Hendroko and Wahono, Satriyo Krido and Mel, Maizirwan and Nindita, Anggi and Purbajanti, Endang Dwi and Harsono, Soni Sisbudi and Malala, Andoniana Rakoto and Nelwan, Leopold O. and Sasmito, Andi (2017) Ballast weight review of capsule husk Jatropha curcas Linn. on acid fermentation first stage in two phase anaerobic digestion. Proceedings of the Pakistan Academy of Sciences, 54 (1B). pp. 47-57. ISSN 0377-2969

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Jawaid, Mohammad and Iqbal, Mohammad (2014) Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Composites: Part B: Engineering, 56. pp. 68-73. ISSN 1359-8368

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2016) Evaluation of oil production from oil palm empty fruit bunch by oleaginous micro-organisms. Biofuels, Bioproducts and Biorefining, 10 (4 (July-August)). pp. 378-392. ISSN 1932-1031

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2015) A multi-criteria analysis approach for ranking and selection of microorganisms for the production of oils for biodiesel production. Bioresource Technology, 190. pp. 264-273. ISSN 0960-8524

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2019) The outlook of the production of advanced fuels and chemicals from integrated oil palm biomass biorefinery. Renewable and Sustainable Energy Reviews, 109. pp. 386-411. ISSN 1364-0321

Ahmad, Farah and Zhang, Zhanying and Doherty, William O. S. and O'Hara, Ian M. (2019) The prospect of microbial oil production and applications from oil palm biomass. Biochemical Engineering Journal, 143. pp. 9-23. ISSN 1369-703X

Ahmad, Zuraida and A.K. , Ahmad Ulwi and T., Maisarah and A., Maisarah (2015) Characterization and preparation of sago starch (SS) based reinforced with silver nanoparticle (SNP). Advanced Materials Research, 1115. pp. 369-372. ISSN 1662-8985

Ahmad Fuad, Fazia Adyani and Houston, Douglas Robert and Michels, Paul A M and Fothergill- Gilmore, Linda A. and Walkinshaw, Malcolm Douglas (2016) Inhibitors of leishmania mexicana phosphoglycerate mutase identified by virtual screening and verified by inhibition studies. Sains Malaysiana, 45 (7). pp. 1113-1120. ISSN 0126-6039

Ahmad Nawawi, Natasha and Ramesh, Singh and Hamdi, Mohd and Tan, Chou Young and Purbolaksono, Judha and Toulouei, Ranna and Sopyan, Iis (2014) Synthesis and properties of biphasic calcium phosphate prepared by different methods. Advanced Materials Research, 970. pp. 20-25. ISSN 1022-6680

Ahmad Puzi, Asmarani and Sidek, Shahrul Na'im and Md Yusof, Hazlina and Mohd Khairuddin, Ismail (2019) Objective analysis of muscle spasticity level in rehabilitation assessment. International Journal of Integrated Engineering, 11 (3). pp. 223-231. ISSN 2229-838X E-ISSN 2600-7916

Ahmad Raus, Raha and Siang, Tan Wen and Ali, Abdul Manaf and Yusoff, Khatijah (2011) An intermediate region in C-terminal of phosphoprotein is required for binding to nucleocapsid of Newcastle disease virus. African Journal of Biotechnology, 10 (81). pp. 18882-18891. ISSN 1684–5315

Ahmed, Ifty and Shaharuddin, Sharifah Imihezri and Sharmin, N. and Furniss, D. and Rudd, C. (2015) Core/clad phosphate glass fibres containing iron and/or titanium. Biomed. Glasses, 1 (1). pp. 20-30. ISSN 2299-3932

Al-Jumaily, Ahmed M. and Embong, Abd Halim and AL-Rawi, Mohammad and Mahadevan, Giri and Shukei, Sugita (2023) Aneurysm rupture prediction based on strain energy-CFD modelling. Bioengineering, 10 (10). pp. 1-16. E-ISSN 2306-5354

Alade, Abbas O. and Jameel, Ahmed Tariq and Muyibi, Suleyman A. and Abdul Karim, Mohamed Ismail and Alam, Md. Zahangir (2011) Removal of oil and grease as emerging pollutants of concern (EPC) in wastewater stream. IIUM Engineering Journal, 12 (4). pp. 161-169. ISSN 1511-788X

Alam, Md Shafiul and Rashid, Muhammad Mahbubur and Roy, Rupal and Faizabadi, Ahmed Rimaz and Gupta, Kishor Datta and Ahsan, Md Manjurul (2022) Empirical study of autism spectrum disorder diagnosis using facial images by improved transfer learning approach. Bioengineering, 9 (11). pp. 1-18. E-ISSN 2306-5354

Alfar, Ibrahim J. and Khorshidtalab, Aida and Akmeliawati, Rini and Ahmad, Salmiah and Jaswir, Irwandi (2016) Towards authentication of beef, chicken and lard using micro near-infrared spectrometer based on support vector machine classification. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4130-4136. ISSN 1819-6608

Aliahmad, Behzad and Kumar, Dinesh Kant and Hao, Hao and Unnikrishnan, Premith and Che Azemin, Mohd Zulfaezal and Kawasaki, Ryo and Mitchell, Paul (2014) Zone specific fractal dimension of retinal images as predictor of stroke incidence. The Scientific World Journal, 2014. pp. 1-7. ISSN 2356-6140

Alqap, Asep Sofwan F. and Sopyan, Iis and -, Suryanto (2014) The effects of excess calcium and aging media on mechanical properties of calcium phosphate filling materials. Advanced Materials Research, 911. pp. 195-199. ISSN 1022-6680

Arifin, Mohd Azmir and Mel, Maizirwan and Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Mohd. Salleh, Hamzah and Sopyan, Iis (2017) Different oxidation treatments on polystyerene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of the Pakistan Academy of Sciences: B. Life and Ennvironmental Sciences, 54 (1B). pp. 55-59. ISSN 2518-4261 E-ISSN 2518-427X

Asrul, Nurrisa and Othman, Raihan and Mohd. Salleh, Hamzah and Ali, Mohammad Nazri (2013) Influence of buffer electrolyte and ph on the electrochemical performance of glucose oxidase-laccase biofuel cell. Journal of Biobased Materials and Bioenergy, 7 (2). pp. 194-197. ISSN 1556-6560

Azmi, Saiful Mohammad Nizam and Jamal, Parveen and Amid, Azura (2012) Purification of Xanthine Oxidase Inhibitor from Carica papaya leaves using Reversed Phase Flash Column Chromatography (RPFCC) - High Performance Thin Layer Chromatography (HPTLC). Australian Journal of Basic and Applied Sciences, 6 (1). pp. 117-122. ISSN 1991-8178

Barre, Mohamed Soleiman and Ali, Fathilah and Mirghani, Mohamed Elwathig Saeed and Nordin, Noor Faizul Hadry and Anuar, Hazleen and Nasir, Nur Aimi (2020) Potential food additive of Boswellia carterii essential oil encapsulated within gum Arabic: a particle size distribution and zeta potential analysis. Food Research, 4 (Supplementary 2). pp. 19-23. E-ISSN 2550-2166

Benoudjit, Abdel Mohsen and Abdul Guthoos, Habibah Farhana and Arris, Farrah Aida and Wan Salim, Wan Wardatul Amani (2017) Pedot: PSS–modified platinum microelectrodes for measurements in aqueous media: Effect of polymer surface area on long-term anodic peak current stability. IIUM Engineering Journal, 18 (2). pp. 11-15. ISSN 1511-788X E-ISSN 2289-7860

Benoudjit, Abdel Mohsen and Bader, Mamoun M. and Wan Salim, Wan Wardatul Amani (2018) Study of electropolymerized PEDOT:PSS transducers for application as electrochemical sensors in aqueous media. Sensing and Biosensing Research, 17. pp. 18-24. ISSN 2214-1804

Chaturvedi, P. and Taguchi, M. and Burns, S. L and Hauser, B. A and Wan Salim, Wan Wardatul Amani and Clausen, J. C. and McLamore, E. S (2013) Emerging technologies for non-invasive quantification of physiological oxygen transport in plants. Planta : An International Journal of Plant Biology, 238 (3). pp. 599-614. ISSN 0032-0935 E-ISSN 1432-2048

Che Azemin, Mohd Zulfaezal and Azman, Mohd Afiq Ariffin and Bahrain, Muhammad Hafizuddin and Mohd Tamrin, Mohd Izzuddin (2019) 3D-printed model enhances learning experience in optometric education. International Journal of Innovative Technology and Exploring Engineering, 8 (9S3). pp. 1355-1359. ISSN 2278-3075

Che Azemin, Mohd Zulfaezal and Mohamad Daud, Norsyazwani and Abd Hamid, Fadilah and Zahari, Ilyanoon and Sapuan, Abdul HaliM (2014) Influence of refractive condition on retinal vasculature complexity in younger subjects. The Scientific World Journal, 2014. pp. 1-5. ISSN 1537-744X

Che Azemin, Mohd Zulfaezal and Mohd Tamrin, Mohd Izzuddin and Hilmi, Mohd Radzi and Mohd. Kamal, Khairidzan (2015) GLCM texture analysis on different color space for pterygium grading. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6410-6413. ISSN 1819-6608

Che Azemin, Mohd Zulfaezal and Mohd Tamrin, Mohd Izzuddin and Hilmi, Mohd Radzi and Mohd. Kamal, Khairidzan (2016) Inter-grader reliability of a supervised pterygium redness grading system. Advanced Science Letters, 22 (10). pp. 2885-2888. ISSN 1936-6612 E-ISSN 1936-7317

Daddiouaissa, Djabir and Amid, Azura and Abdullah Sani, Muhamad Shirwan and A. M. Elnour, Ahmed (2021) Evaluation of metabolomics behavior of human colon cancer HT29 celllines treated with ionic liquid graviola fruit pulp extract. Journal of Ethnopharmacology, 270. pp. 1-8. ISSN 0378-8741 E-ISSN 1872-7573

Emir Aslam, Thopatalam and Benoudjit, Abdel Mohsen and Nasteho, Ali and Ismail, Nur Alya Batrisya and Wan Salim, Wan Wardatul Amani (2018) Effectiveness of multi-walled carbon nanotubes and activated carbon for capturing E. coli 0157:H7 for application in water filtration. Journal of Engineering and Applied Sciences, 13 (10). pp. 3582-3586. ISSN 1816-949x E-ISSN 1818-7803

Fatai, Sado and Sidek, Shahrul Na'im and Md. Yusof, Hazlina and Hafiz, Latif M. and Babawuro, Adamu Y. (2015) Development and control of a 3DOF upper-limb robotic device for patients with paretic limb impairment. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17356-17362. ISSN 1819-6608

Fazan, Fazilah and Besar, Idris and Osman, Anuar and Samsudin, Abdul Rani and Khalid, Kamarul Ariffin (2008) Successful commercialisation of locally fabricated bioceramics for clinical applications. The Medical journal of Malaysia, 63 (Supp A). pp. 49-50. ISSN 0300-5283

Hadzri, Edi Azali and Abdul Ghani, Ahmad Lufti and Shamsuddin, Amir Hamzah and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Abd. Aziz, Azian (2011) Computational investigation on CSF flow analysis in the third ventricle and aqueduct of sylvius. IIUM Engineering Journal, 12 (3). pp. 133-142. ISSN 1511-788X

Haris, Mohd Yusoff/M.Y. and Laila, Dayang/D and Zainudin , Edisyam/E.S and Mustapha, Faizal/F and Zahari, Rizal/R and Halim, Zahurin/Z (2011) Preliminary Review of Biocomposites Materials for Aircraft Radome Application. Key Engineering Materials, 471-72. pp. 563-568. ISSN 1013-9826

Hilmi, Mohd Radzi and Che Azemin, Mohd Zulfaezal and Mohd. Kamal, Khairidzan and Mohd Tamrin, Mohd Izzuddin and Abdul Gaffur, Norfazrina and Tengku Sembok, Tengku Mohd (2017) Prediction of changes in visual acuity and contrast sensitivity function by tissue redness after pterygium surgery. Current Eye Research, 42 (6). pp. 852-856. ISSN 0271-3683 E-ISSN 1460-2202

Hussain, Zakia and Zainul Azlan, Norsinnira and Yusof, Arif Zuhairi (2018) Human hand motion analysis during different eating activities. Applied Bionics and Biomechanics, 2018. pp. 1-13. ISSN 1176-2322 E-ISSN 1754-2103

Ibrahim, S.Noorjannah and Alkaisi, Maan M. (2015) Microelectrode design for particle trapping on bioanalysis platform. Advanced Materials Research, 1115. pp. 543-548. ISSN 1022-6680

Ismail, Nur Alya Batrisya and Arris, Farrah Aida and Tumian, Afidalina and Wan Salim, Wan Wardatul Amani (2019) Preliminary study on the effect of reduced graphene oxide, gold nanoparticles, and nafion® concentration on redox peak current for electrochemical biosensing. Journal of Engineering Science and Technology (JESTEC), 14 (1). pp. 48-58. ISSN 1823-4690

Ismail, Rozila and Azari, Pedram and Sha'ban, Munirah and Wan Kamarul Zaman, Wan Safwani and Pingguan-Murphy, Belinda and Chua, Kien Hui (2021) Polycaprolactone-based scaffolds facilitates osteogenic differentiation of human adipose-derived stem cells in a co-culture system. Polymers, 13 (4). pp. 1-14. E-ISSN 2073-4360

Jaafar, Israd Hakim and LeBlon, Courtney E. and Wei, Ming-Tzo and Ou-Yang, Daniel and Coulter, John P. and Jedlicka, Sabrina S. (2011) Improving fluorescence imaging of biological cells on biomedical polymers. Acta Biomaterialia, 7 (4). pp. 1588-1598. ISSN 1742-7061

Jahn Kassim, Puteri Shireen and Abdul Latip, Nurul Syala and Mohd Fauzi, Mustaffa Kamal Bashar (2017) Coupling thermal mass and water systems as urban passive design in hot climates. ARPN Journal of Engineering and Applied Sciences, 12 (16). pp. 4786-4790. ISSN 1819-6608

Jalal, K. C. A. and Alam, Md. Zahangir and Muyibi, Suleyman Aremu and Jamal, Parveen (2006) Isolation and purification of bacterial strains from treatment plants for effective and efficient bioconversion of domestic wastewater sludge. American Journal of Environmental Sciences, 2 (1). pp. 1-5. ISSN 1553-345X

Jamal, Parveen and Ahmad Barkat, Anumsima and Amid, Azura (2011) Response surface optimization of the process conditions for anti-diabetic compounds from Cucumis Sativus. African Journal of Biotechnology, 10 (81). pp. 18788-18794. ISSN 1684–5315

Jamal, Parveen and Alam, Md. Zahangir and Mohd Salleh, Mohammad Ramlan and Nadzir, M. M. (2005) Screening of Aspergillus for citric acid production from Palm Oil Mill Effluent. Biotechnology, 4 (4). pp. 275-278. ISSN 1682-296X

Jamal, Parveen and Alam, Md. Zahangir and Ramlan, M. and Salleh, M. and M. Akib, Munirah (2005) Sewage treatment plant sludge: a source of potential microorganism for citric acid production. American Journal of Applied Sciences, 2 (8). pp. 1236-1239. ISSN 1546-9239

Jamal, Parveen and Alam, Md. Zahangir and Umi, Nurul (2007) Potential strain to produce bioprotein from cheaper carbon source: Hope for millions. American Journal of Biotechnology and Biochemistry, 3 (2). pp. 42-46. ISSN 1553-3468

Jamal, Parveen and Wan Nawawi, Wan Mohd Fazli and Alam, Md. Zahangir (2012) Optimum medium components for biosurfactant production by Klebsiella pneumoniae WMF02 utilizing sludge palm oil as a substrate. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 100-108. ISSN 1991-8178

Jamaluddin, Mohd Jamil Aizat and Mohd. Salleh, Hamzah (2012) On-column refolding of recombinant fungal endoglucanase. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 128-133. ISSN 1991-8178

Jumahat, Shaliza and Gan, Kok Beng and Misran, Norbahiah and Islam, Mohammad Tariqul and Mahri, Nurhafizah and Ja'afar, Mohd. Hasni (2020) Automated QT interval measurement using modified Pan-Tompkins algorithm with independent isoelectric line approach. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 44. pp. 51-61. ISSN 2296-9845

Khalid, Kamarul Ariffin (2004) Biomaterials research in Malaysia--development in facilities and expertise for in-vivo evaluation. The Medical journal of Malaysia, 59 (Supp B). pp. 133-134. ISSN 0300-5283

Khan, Burhan ul Islam and Olanrewaju, Rashidah Funke and Baba, Asifa Mehraj and Mir, Roohie Naaz and Lone, Sajad Ahmad (2015) DTASR: Dual Threshold-based authentication for secure routing in mobile adhoc network. International Journal of Information Technology & Computer Science (IJITCS), 22 (1). pp. 1-9. ISSN 2090-1610

Mahamad Maifiah, Mohd Hafidz and Mohd. Salleh, Hamzah and Jamal, Parveen and Nuge, Tamrin (2011) Screening and optimization of media components for phytase production of ASUIA 279 in Pichia pastoris system using statistical design. Australian Journal of Basic and Applied Sciences. ISSN 1991-8178 (In Press)

Maleque, Md. Abdul (2015) Synthesis and characterization of Ni–P coated hexagonal boron nitride by electroless nickel deposition. Surface Engineering and Applied Electrochemistry, 51 (6). pp. 523-529. ISSN 1068-3755

Mansor, Mariatul Fadzillah and Jamaludin, Nurul Syazwana and Tajuddin, Husna Ahmad (2021) Optimization of food waste to sewage sludge ratio for anaerobic co-digestion process using Artificial Neural Network (ANN) and Genetic Algorithm (GA). Biological And Natural Resources Engineering Journal, 5 (2). pp. 62-72. E-ISSN 2637-0719

Md Ali @ Tahir, Aisyah Hanani and Mohamed Amin, Muhammad Azri Ifwat and Noor Azmi, Azran Azhim and Sha'ban, Munirah (2019) Structural and functional properties of neocartilage construct engineered in poly (Lactic-co-Glycolic Acid) (PLGA) based scaffolds. International Journal of Integrated Engineering, 11 (3). pp. 109-118. ISSN 2229-838X E-ISSN 2600-7916

Md Nazir, Noorhidayah and Zulkifly, Ahmad Hafiz and Khalid, Kamarul Ariffin and Zainol, Ismail and Zamli, Zaitunnatakhin and Sha'ban, Munirah (2020) The cartilaginous tissue formation using sry (Sex determining region Y)-BOX9 and telomerase reverse transcriptase genes transfected chondrocytes: In vivo approach = Formasi tisu tulang rawan menggunakan sry (Penentu jantina rantau Y)-BOX9 dan telomeras gen transkripsi berbalik kondrosit transfeksi: Pendekatan in vivo). Sains Malaysiana, 49 (5). pp. 1067-1080. ISSN 0126-6039

Meor Badi’auzzaman, Iffah Syafiqah and Moey, Soo Foon and Che Azemin, Mohd Zulfaezal and Mohd Tamrin, Mohd Izzuddin (2019) The use of decision tree in breast cancer-related research: a scoping analysis based on Scopus-indexed articles. International Journal of Innovative Technology and Exploring Engineering, 8 (9S3). pp. 1344-1355. ISSN 2278-3075

Mirghani, Mohamed Elwathig Saeed and Yahya, Liyana and Jamal, Parveen (2012) Bioactivity analysis of lemongrass (Cymbopogan citratus) essential oil. International Food Research Journal, 19 (2). pp. 569-575. ISSN 19854668 (P), 22317546 (O)

Mohamad, Mohd Yusof and Mohamed Amin, Muhammad Azri Ifwat and Harun Ismail, Ahmad Fahmi and Md Nazir, Noorhidayah and Ahmad Radzi, Muhammad Aa'zamuddin and Hashim, Rosyafirah and Mat Nawi, Nur Farhana and Zainol, Ismail and Zulkifly, Ahmad Hafiz and Sha'ban, Munirah (2017) Fabrication and characterization of three-dimensional poly(lactic acid-co-glycolic acid), atelocollagen, and fibrin bioscaffold composite for intervertebral disk tissue engineering application. Journal of Bioactive and Compatible Polymers. pp. 1-13. ISSN 0883-9115 E-ISSN 1530-8030 (In Press)

Mohamad Sukri, Norhamiza and Sha'ban, Munirah and Ahmad Radzi, Muhammad Aa'zamuddin and Abdul Rahman, Rozlin and Zulkifly, Ahmad Hafiz (2022) The feasibility of using human primary chondrocytes derived from osteoarthritic patients overexpressed with SOX9 seeded on PLGA-fibrin hybrid scaffolds for cartilage engineering. Malaysian Journal of Fundamental and Applied Sciences, 18 (3). pp. 304-322. ISSN 2289-5981 E-ISSN 2289-599X

Mohamed, Scnouci B. and Mirghani, Mohamed Elwathig Saeed and Olorunnisola, K. Saheed and Mohamed, Benali A. (2016) Anti-cariogenic activities of some East African oleo gum resin crude extracts and essential oils. International Food Research Journal, 23 (5). pp. 2112-2116. ISSN 1985-4668 E-ISSN 2231-7546

Mohamed Noor, Noraini and Abdullah, Ezzat Chan and Othman, Raihan and Mujawar, Mubarak N. (2016) Single-route synthesis of magnetic biochar from sugarcane bagasse by microwave-assisted pyrolysis. Materials Letters, 184. pp. 315-319. ISSN 0167-577X

Mohamed Salleh, Mohamad Ramlan and Jamal, Parveen and Salleh, Rohani and Hasim, Haslinda (2004) Isolation of GSH from Baker Yeast by Ultrasonic method. Pakistan Journal of Biological Sciences, 7 (10). pp. 1741-1744. ISSN 1028-8880

Mohamed Salleh, Mohamad Ramlan and Farouk, Abd. Elaziem and Jamal, Parveen and Hashim, Yumi Zuhanis Has-Yun and Salleh, Rohani and Hasim, Haslinda (2005) Comparison studies among the methods used in isolating the GSH from baker yeast. Journal of Applied Sciences, 5 (1). pp. 151-154. ISSN 1812-5654

Mohd Daud, Farah Diana and Iis, Sopyan and Mel, Maizirwan (2011) Synthesis of TiO2 nanosized powder photocatalyst via sol-gel method for bacteria inactivation application. Malaysian Journal of Microscopy, 7. pp. 161-169. ISSN 1823-7010

Mohd Yatim, Norazlina and Shaaban, Azizah and Dimin, Mohd Fairuz and Yusof, Faridah and Abdul Razak, Jeefferie (2016) Application of response surface methodology for optimization of urea grafted multiwalled carbon nanotubes in enhancing nitrogen use efficiency and nitrogen uptake by paddy plants. Journal of Nanotechnology, 2016. pp. 1250739-1. ISSN 1687-9503 E-ISSN 1687-9511

Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin (2014) Comparison studies on solid state diffusion of Ni–Ti and Ni–TiH2 under CaH2 reducing environment. Materials Letters, 121. pp. 36-39. ISSN 0167-577X

Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin (2016) The role of CaH2 in preventing oxidation for the production of single-phase NiTi alloy in solid state. Journal of Alloys and Compounds, 655. pp. 364-371. ISSN 0925-8388

N.A. Halim, Muhammad Amirul and Hashim, Yumi Zuhanis Has-Yun and Samsudin, Nurhusna and Mohd Salleh, Hamzah (2018) Development of porous PCL-based microcarrier. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1648-1653. ISSN 2088-5334

Narayanamurthy, Vigneswaran and Lee, Tze Pin and Firus Khan, Al’aina Yuhainis and Samsuri, Fahmi and Mohamed, Khairudin and Hamzah, Hairul Aini and Baharom, Madia Baizura (2018) Pipette Petri Dish Single-Cell Trapping (PP-SCT) in microfluidic platforms: a passive hydrodynamic technique. Fluids, 3 (3). pp. 1-16. ISSN 2311-5521

Nik Hashim, Nik Nur Wahidah and Wilkes, Mitchell and Salomon, Ronald (2015) Investigating the course of recovery in high risk suicide using power spectral density. Asian Journal of Applied Sciences, 3 (4). pp. 608-614. ISSN 2321-0893

Nik Hashim, Nik Nur Wahidah and Wilkes, Mitchell and Salomon, Ronald (2015) Timing patterns of speech as potential indicators of near-term suicidal risk. International Journal of Multidisciplinary and Current Research, 3. pp. 1104-1116. ISSN 2321-3124

Omar, Nurizan and Ahmad, Zuraida (2013) The effects of initiator content on sago (metroxylon rottb.) starch-G-PAN hydrogel. Advanced Materials Research, 683. pp. 218-221. ISSN 1022-6680

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2018) Cancer histopathologic subtypes prediction from miRNA expression data using pattern recognition. Journal of Informatics and Mathematical Sciences. ISSN 0974-875X E-ISSN 0975-5748 (In Press)

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2019) Cancer relapse prediction from microrna expression data using machine learning. Journal of Mechanics of Continua and Mathematical Sciences, Special Issue (1). pp. 365-373. ISSN 0973-8975 E-ISSN 2454-7190

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2017) Evaluation of miRNA-based classifiers for cancer diagnosis. Science International, 29 (5). pp. 1019-1024. ISSN 1013-5316

Rozhan, Alya Naili and Hamzah, Mohd. Salleh and Hadi , Purwanto (2016) New technology for biochar production from oil palm empty fruit bunch. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 368-371. ISSN 1819-6608

Ruqayyah, Tijani I.D. and Jamal, Parveen and Alam, Md Zahangir and Mirghani, Mohamed Elwathig Saeed (2012) Optimization of cassava peel medium to an enriched animal feed by the white rot fungi Panus tigrinus M609RQ. International Food Research Journal, 19 (2). 427 -432. ISSN 19854668 (P), 22317546 (O)

Ruqayyah, Tijani I.D. and Jamal, Parveen and Alam, Md. Zahangir and Mirghani, Mohamed Elwathig Saeed (2011) Lignin modifying enzyme activities by some Malaysian white rot fungi. ACT-Biotechnology Research Communications, 1 (1). pp. 14-19. ISSN 1858-5965

Sahari, J. and Sapuan, S. M. and Maleque, Md. Abdul and Zainudin, E.S. (2013) Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design, 49. pp. 285-289. ISSN 0261-3069

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) Effect of water absorption on mechanical properties of sugar palm fibre reinforced sugar palm starch (spf/sps) biocomposites. Journal of Biobased Materials and Bioenergy, 6 (6). pp. 1-5. ISSN 1556-6560

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2013) Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research, 701. pp. 225-228. ISSN 1022-6680

Sahari, J. and Sapuan, S. M. and Zainudin, E. S. and Maleque, Md. Abdul (2014) Degradation characteristics of SPF/SPS biocomposites. Fibres & Textiles in Eastern Europe, 22 (5(107)). pp. 94-96. ISSN 1995-2014

Sahari, Japar and Sapuan, Mohd Salit and Zainudin, Edi Syams and Maleque, Md. Abdul (2014) Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences, 11 (1). pp. 1836-1840. ISSN 1546-9239 E-ISSN 1554-3641

Sahari, Japar and Sapuan, S.M. and Zainudin, E.S. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul and Zuhri, Mohd Y M and Akhtar, Riaz (2017) Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis, 14 (2 (Thematic Issue)). pp. 227-232. ISSN 1570-1794 E-ISSN 1875-6271

Samsudin, Amirah and Azmi, Azlin Suhaida and Mohd Nawi, Mohd Nazri and Abdul Halim, Amanatuzzakiah (2019) Nutrients and chemical oxygen demand (COD) removals by microalgae - bacteria co-culture system in palm oil mill effluent (POME). IIUM Engineering Journal, 20 (2). pp. 22-31. ISSN 1511-758X E-ISSN 2289-7860

Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Arifin, Mohd Azmir and Mel, Maizirwan and Mohd. Salleh, Hamzah and Nordin, Norshariza and Sopyan, Iis and Jimat, Dzun Noraini (2017) Statistical optimization of gelatin immobilization on modified surface PCL microcarrier to improve PCL microcarrier compatibility. Jurnal Teknologi, 79 (6). pp. 167-175. ISSN 2180-3722

Sediono, Wahju and Dössel, O (2002) Elastomechanics of the ventricles: development of a phantom and results of simulation [Elastomechanik der Ventrikel: Entwicklung eines Phantoms und Simulationsergebnisse.]. Biomedizinische Technik, 47 (s1a). pp. 243-245. ISSN 0013-5585

Shogar, Ibrahim and Abdul Rahman, Suzanah (2017) Philosophy of modern bioengineering. IIUM Engineering Journal, 18 (2). pp. 16-33. ISSN 1511-788X E-ISSN 2289-7860

Siddiqi, Abdul Rahman and Sidek, Shahrul Na'im (2016) Estimation of continuous thumb angle and force using electromyogram classification. International Journal of Advanced Robotic Systems, 13 (5). ISSN 17298814 E-ISSN 17298814

Sopyan, Iis and -, Gunawan and -, Suryanto (2015) Sol-gel derived zinc doped calcium phosphate bioceramics prepared via different sintering strategies. Advanced Materials Research, 1115. pp. 341-344. ISSN 1022-6680

Sopyan, Iis and Ahmad, Fadli (2012) Floating porous alumina from protein foaming-consolidation technique for cell culture application. Ceramics International, 38. pp. 5287-5291. ISSN 0272-8842

Sopyan, Iis and C. M., Mardziah and Koay Mei, Hyie and N. R., Nik Roselina (2014) Conversion of strontium hydroxyapatite nanopowders to porous scaffolds for bone implant application. Applied Mechanics and Materials, 607. pp. 3-6. ISSN 1660-9336

Sopyan, Lis and Pusparini, Erlani and Subramaniam, Ramesh T. and Tan, Chou Yong and Ching, Yernchee and Wong, Yinhow and Zainal Abidin, Nor Ishida and Chandran, Hari and Ramesh, S. and Bang, Lethi (2017) Influence of sodium on the properties of sol-gel derived hydroxyapatite powder and porous scaffolds. Ceramics International, 43 (15). pp. 12263-12269. ISSN 0272-8842

Suksuwan, Wasu and Wae-hayee, Makatar and Mel, Maizirwan (2018) The effect of single and double air inlets on swirling flow in a reactor of a fluidized bed gasifier. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 157-166. ISSN 2289-7879

Sutarto, Auditya Puwardini and Abdul Wahab, Muhammad Nubli and Mat Zin, Nora (2013) Effect of biofeedback training on operator’s cognitive performance. IOS Press, 44 (2). pp. 231-243. ISSN 1051-9815

Syed, Bilal Shah and Hussain, Mahmud and Yusof Khan, Zarinah Jan and Sayed, Inayatullah Shah (2017) An overview of ethical concerns in re-engineering the human body. Scholars Bulletin, 3 (10). pp. 525-528. ISSN 2412-9771 E-ISSN 2412-897X

T., Maisarah and Ahmad, Zuraida and A., Roszalia and M.A, Luqman (2015) Characterization of rattan waste for binderless particleboard (BPB) production. Advanced Materials Research, 1115. pp. 317-320. ISSN 1662-8985

T., Maisarah and Ahmad, Zuraida and A., Marjan (2015) The effect of black liquor on rattan waste binderless board (BPB) produced via digestion-hot pressing (DHP) process. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9753-9758. ISSN 1819-6608

Wan Nawawi, Wan Mohd Fazli and Jamal, Parveen and Alam, Md. Zahangir (2010) Utilization of sludge palm oil as a novel substrate for biosurfactant production. Bioresource Technology, 101. pp. 9241-9247. ISSN 0960-8524

Wan Salim, Wan Wardatul Amani and Park, Joon Hyeong and Ul Haque, Aeraj and Porterfield, David Marshall (2013) Lab-on-a-chip approaches for space-biology research. Recent Patents on Space Technology , 3 (1). pp. 24-39. ISSN 2210-6871

Wilkinson, Shane M. and Liew, Chu W. and Mackay, Joel P. and Mohd. Salleh, Hamzah and Withers, Stephen G. and McLeod, Malcolm D. (2008) Escherichia coli glucuronylsynthase: an engineered enzyme for the synthesis of β-glucuronides. Organic Letters, 10 (8). pp. 1585-1588. ISSN 1523-7060

Yusof, Fatihah and Sha'ban, Munirah and Noor Azmi, Azran Azhim (2019) Engineered meniscus scaffolds using sonication decellularization treatment system. International Journal of Integrated Engineering, 11 (3 Special Issue 2019: Electrical and Electronic Engineering). pp. 81-89. ISSN 2229-838X E-ISSN 2600-7916

Zakaria, Nur Z.I. and Gunny, Ahmad Anas Nagoor and Dzahir, Mohd I.H.M and Ahmad, Abdul Aziz and Ismail, Ku S.K and Mahmod, Safa Senan and Javed, Muhammad and Yazdi, Namdar B and Saifuddin, Md. N.A.A (2023) Utilization of seaweed (Gracilaria sp.) liquid as cost- effective macronutrients and micronutrients for bioethanol production. Chemical Engineering Transactions, 106. pp. 1357-1362. ISSN 2283-9216

Zulkifli, Farah Hanani and Jahir Hussain, Fathima Shahitha and Zeyohannes, Senait Sileshi and Abdull Rasad, Mohammad Syaiful Bahari and Mohd Yusuff, Mashitah (2017) A facile synthesis method of hydroxyethyl cellulose-silver nanoparticle scaffolds for skin tissue engineering applications. Materials Science and Engineering C, 79. pp. 151-160. ISSN 0928-4931 E-ISSN 1873-0191

Book

Toha, Siti Fauziah and Abdul Majeed, Anwar P.P. and Azmi, Nur Liyana and Nordin, Nor Hidayati Diyana and Abdul Rashid, Nur Nadiah and shakri, Adibah and Mahadi, Alya Syafikah, eds. (2023) Proceedings : Post Pandemic Challenges in Embracing Society 5.0. Persatuan Saintis Muslim Malaysia (PERINTIS), Seri Kembangan, Selangor.

Muyibi, Suleyman Aremu and Abdulkarim, Mohd Ismail and Mohd. Salleh, Hamzah and Al-Khatib, Ma'an Fahmi Rashid and Alam, Md. Zahangir and Jami, Mohammed Saedi, eds. (2011) Recent advances in bioenvironmental engineering. IIUM Press, Kuala Lumpur. ISBN 9789670225852

Khalaf, Abubakir Ibraheem and Alam, Md. Zahangir (2017) Optimization of amylase production from bitter manihot esculenta using Aspergillus Niger. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-494-0

Sanober, Fahmi and Wan Salim, Wan Wardatul Amani (2017) Fabrication and characterization of graphene-based immunosensor for E. coli O157:H7 detection. IIUM Press, Kuala Lumpur. ISBN 9789674184698

Book Chapter

Arifin, Mohd Azmir and Hashim, Yumi Zuhanis Has-Yun and Mel, Maizirwan (2011) Serum free medium. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 47-57. ISBN 9789674180713

Arifin, Mohd Azmir and Mel, Maizirwan and Ahmad Raus, Raha and Syed Hassan, Sharifah and Idreis, Aini (2011) The growth study of DF1 cell in microcarrier based bioreactor. In: Recent Development of Microcarrier for Cell Culture Engineering. IIUM Press, Kuala Lumpur, pp. 121-129. ISBN 978-967-418-009-6

Azmi, Azlin Suhaida and Sulaiman, Sarina and Mohamed Azmin, Nor Fadhillah and Ali, Fathilah (2015) Scaling-up recombinant enzyme fermentation. In: Recombinant Enzymes - From Basic Science to Commercialization. Springer International Publishing, Springer International Publishing Switzerland, pp. 99-113. ISBN 978-3-319-12397-4

Hashim, Yumi Zuhanis Has-Yun and Gill , Chris (2016) Simple cell attachment and viability assay for screening anticancer properties of natural products. In: Experimental methods in modern biotechnology. IIUM Press Series of Textbook from the Islamic Perspectives, 2 . IIUM Press, Kuala Lumpur, pp. 1-8. ISBN 978-967-418-384-4

Ismail, Nur Alya Batrisya and Abd-Wahab, Firdaus and Bader, Mamoun M. and Wan Salim, Wan Wardatul Amani (2018) Electrochemical methods to characterize nanomaterial-based transducers for the development of noninvasive glucose sensors. In: Nanotechnology: applications in energy, drug and food. Springer International Publishing AG, pp. 423-439. ISBN 978-3-319-99601-1

Mel, Maizirwan and Arifin, Mohd Azmir (2011) Culture medium. In: Introduction to cell culture for engineering. IIUM Press, Kuala Lumpur, pp. 35-46. ISBN 9789674180713

Ramli, Nurul Izzati and Ismail, Nur Alya Batrisya and Abd. Wahab, Mohd. Firdaus and Wan Salim, Wan Wardatul Amani (2018) Cyclic voltammetry and electrical impedance spectroscopy of electrodes modified with PEDOT:PSS-reduced graphene oxide composite. In: Transparent conducting films. Intech Open, London, United Kingdom, pp. 1-10. (In Press)

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Jumaidin, R. (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 57-70. ISBN 978-1-4987-5302-9

Sopyan, Iis and Abdul Rahim, Toibah and Ahmad, Zainal Arifin (2010) Magnesium-doped biphasic calcium phosphate nanopowders via sol-gel method. In: The Sol-Gel Process : Uniformity, Polymers and Applications. Nova Science Publishers, Inc. ISBN 978-1-61761-621-1

Vikram, David and Nather, Aziz and Khalid, Kamarul Ariffin (2005) Role of ceramics as bone graft substitutes. In: Bone Grafts and Bone Substitutes: Basic Science and Clinical Applications. World Scientific Publishing Co Pte Ltd, Singapore, pp. 445-458. ISBN ISBN 13: 9789812560896 ISBN 10: 9812560890

Proceeding Paper

Abd Halin, Nur Iilani and Al-Khatib, Ma'an Fahmi Rashid and Mohd. Salleh, Hamzah (2017) Immobilization of lipase candida rugosa on nylon 6 polymer grafted with poly venylbenzyl chloride (PVBC). In: ASIA International Multidisciplinary Conference 2017, 1st-2nd May 2017, Johor Bahru, Johor.

Abd Kadir, Nur Amanina and Mohd Zaki, Hafizah Hanim and Abd Samad, Ikhmal Hazrith and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Abdullah, Jamaluddin (2023) Tailoring compressive properties of sintered porous NiTi Alloy for biomedical implant through pore forming agent. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Abd Latif, Muhammad Hafiz and Md. Yusof, Hazlina and Sidek, Shahrul Na'im and Rusli, Nazreen (2015) Implementation of GLCM features in thermal imaging for human affective state detection. In: 2015 IEEE International Symposium on Robotics and Intelligent Sensors, 18-20 October 2015, Langkawi, Kedah.

Abd Latif, Muhammad Hafiz and Md. Yusof, Hazlina and Sidek, Shahrul Na'im and Rusli, Nazreen (2015) Thermal imaging based affective state recognition. In: 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IEEE IRIS20I5), 18th-20th October 2015, Langkawi, Kedah.

Abd Latif, Muhammad Hafiz and Md. Yusof, Hazlina and Sidek, Shahrul Na'im and Shikhraji, M.S. and Safie, M.H (2014) A gaming-based system for stroke patients physical rehabilitation. In: 2014 IEEE CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES, 8-10 December 2014, Miri, Sarawak.

Abdul Rahman, Rozlin and Mohamad Sukri, Norhamiza and Md Nazir, Noorhidayah and Ahmad Radzi, Muhammad Aa’zamuddin and Zulkifly, Ahmad Hafiz and Che Ahmad, Aminudin and Sha'ban, Munirah (2016) Articular cartilage tissue engineering using poly(lactic-co-glycolic acid) based scaffolds seeded with bone marrow mesenchymal stem cells: from in vitro to in vivo model. In: National Colloquium on Stem Cell Research 2016, 7-8 March 2016, Kota Bharu, Kelantan. (Unpublished)

Adebisi, A. A. and Maleque, Md. Abdul and Bello, K. A. (2016) Effect of stir casting process parameters on tribological performance of Al6061-SiCp composite. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Zamani, A. R. (2012) Development of waste coir-reinforced aluminum matrix automotive brake pad material. In: IRIIE2012, 21-22 February 2012, CAC, IIUM. (Unpublished)

Ahmad Barkat, Anumsima and Jamal, Parveen and Amid, Azura (2011) Optimization of Extraction Process for Antidiabetic Compounds from Cucumis sativus. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Ahmad Radzi, Muhammad Aa'zamuddin and Zainuddin, Zainul Ibrahim and Hashi, Abdurezak Abdulahi and Sha'ban, Munirah (2016) The application of Maqasid al-Shari’ah into cartilage tissue engineering. In: 2nd World Congress on Integration and Islamicisation: Focus on Medical and Health Care Sciences (SWCII) 2016: Theme: Incorporating Moral Values and Maqasid Al-Shari’ah into Medical and Health Care Practices., 221-23 Oct 2016, Kuantan, Pahang.

Ahmad Radzi, Muhammad Aa'zamuddin and Zainuddin, Zainul Ibrahim and Hashi, Abdurezak Abdulahi and Sha'ban, Munirah (2016) A bibliometric and thematic study of tissue engineering research and development in Malaysia by using online databases. In: 6th Malaysian Tissue Engineering and Regenerative Medicine Scientific Meeting in conjunction with 2nd Malaysia Stem Cell Meeting (MTERMS) 2016: Programme and Abstract Book, 17-18 Nov 2016, Seberang Jaya, Pulau Pinang.

Ahmad Radzi, Muhammad Aa'zamuddin and Zainuddin, Zainul Ibrahim and Hashi, Abdurezak Abdulahi and Sha'ban, Munirah (2016) An overview of the Islamic legal maxim vis-a-vis cartilage tissue engineering experimentation. In: The 2nd KAHS Research Week 2016 and the 1st Allied Health Scientific Colloquium 2016, 21-25 Nov 2016, Kuantan.

Aissa, Foughalia and Abdul Rahim, Rosminazuin and Nordin, Anis Nurashikin and Ibrahim, Siti Noorjannah (2015) Simulation of an hybrid blood cells micro-separator. In: 2015 IEEE Regional Symposium on Micro and Nanoelectronics (IEEE-RSM2015), 19th-21st August 2015, Kuala Terengganu, Malaysia.

Al-Khatib, Ma'an Fahmi Rashid and Bahrudin, Nik Adlin and Mohd. Salleh, Hamzah and Nasef, Mohamed Mahmoud (2017) Response surface methodology for optimization of lipase immobilization conditions on nanofibers grafted with polyglycidyl methachrylate (PGMA). In: 3rd International Symposium on Materials and Sustainable Development (ISMSD2017), 7th-8th November 2017, Boumerdes, Algeria.

Alam, Md. Zahangir and Abdul Karim, Mohamed Ismail and Hamisan, Ahmad Fadhlan and Jamal, Parveen and Chowdhury, Ahmed Jalal Khan (2006) Liquid State Bioconversion of Palm Oil Mill Effluent for Cellulase Production: Statistical Optimization of Process Conditions. In: 1st International Conference on Natural Resources Engineering & Technology, 24-25 July 2006, PutraJaya.

Athoillah, Ahdyat Zain and Ahmad, Farah (2018) Lipid production from bioremediation of palm oil mill effluent. In: 5th International Conference Biotechnology Engineering (ICBioE ‘18), 19th-20th September 2018, Kuala Lumpur.

Azmi, Saiful Mohammad Nizam and Jamal, Parveen and Amid, Azura (2010) Xanthine Oxidase inhibitory activity from potential Malaysian medicinal plants as remedies for gout. In: International Conference on Food Research (ICFR 2010), 22 - 24 November 2010, Marriot Putrajaya, Malaysia.

Azmi, Saiful, M.N. and Jamal, Parveen and Amid, Azura (2011) Purification of Xanthine Oxidase Inhibitor from Carica papaya leaves using Reversed Phase Flash Column Chromatography (RPFCC) - High Performance Thin Layer Chromatography (HPTLC). In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Bello, K. A. and Maleque, Md. Abdul and Adebisi, A. A. (2016) Dry sliding wear characterization of TIG embedded composite coatings using Taguchi based grey relational analysis approach. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

Benoudjit, Abdel Mohsen and Abdul Guthoos, Habibah Farhana and Arris, Farrah Aida and Wan Salim, Wan Wardatul Amani (2016) PEDOT: PSS composite deposited on a microplatinum electrode as a robust biosensor transducer for applications in liquid media. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Binti Akbar Tajudin, Hazimah and Mirghani, Mohamed Elwathig Saeed and Al-Khatib, Ma'an Fahmi Rashid and Mohd. Salleh, Hamzah (2017) Immobilization of Candida rugosa lipase on grafted-PGMA polymer for industrial applications. In: ASIA International Multidisciplinary Conference 2017, 1st-2nd May 2017, Johor Bahru, Johor.

Che Azemin, Mohd Zulfaezal (2014) Minimal training time in supervised retinal vessel segmentation. In: 13th International Conference on New Trends in Intelligent Software Methodology Tools, and Techniques (SoMeT_14), 22-24 Sept. 2014, Langkawi, Malaysia.

Che Azemin, Mohd Zulfaezal and Hilmi, Mohd. Radzi and Mohd. Kamal, Khairidzan (2014) Supervised pterygium fibrovascular redness grading using generalized regression neural network. In: 13th International Conference on New Trends in Intelligent Software Methodology Tools, and Techniques (SoMeT_14), 22nd-24th September 2014, Langkawi, Kedah, Malaysia.

Che Ghani, Saiful Anwar and Mohamed, Siti Rohaida and Sha'ban, Munirah and Wan Harun, Wan Sharuzi and Md Noar, Nor Aida Zuraimi (2020) Experimental investigation of biological and mechanical properties of CoCrMo based selective laser melted metamaterials for bone implant manufacturing. In: 4th CIRP Conference on Biomanufacturing, CIRP-BioM 2019, Guangzhou.

El-Sayed, Mohamed Hassan Attia and Ariff, Tasnim Firdaus and Noor Awalludin, Muhammad Mukhtar (2023) Development of framework for the management, handling system and maintenance in using hydrosurgery at hospitals. In: WJTA Conference and Expo 2023, 31 October - 1 November 2023, New Orleans, Louisiana.

Fatai, Sado and Sidek, Shahrul Na'im and Md. Yusof, Hazlina (2014) Independent Joint Control of a 3-DOF Robotic System Using PI Controller. In: International Conference on Computer and Communication Engineering (ICCCE 2014), 23rd – 25th September 2014, Kuala Lumpur.

Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im (2014) Electromagnetic based emotion recognition using ANOVA feature selection and bayes network. In: 2014 IEEE Conference on Biomedical Engineering and Sciences (IECBES 2014), 8-10 December 2014, Miri, Sarawak.

Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im (2014) Non-invasive, non-contact based affective state identification. In: 2014 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE), 7-8 Apr. 2014, Penang, Malaysia.

Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im and Wok, Saodah (2014) Affective state classification using Bayesian classifier. In: 2014 Fifth International Conference on Intelligent Systems, Modelling and Simulation (ISMS 2014), 27-29 Jan. 2014, Langkawi, Malaysia.

Gunawan, Teddy Surya and Ambikairajah, Eliathamby (2012) Parallel implementation of genomic sequences classification using modified gabor wavelet transform on multicore systems. In: International Conference on Biomedical Engineering (ICoBE2012), 27-28 Feb 2012, Penang. (Unpublished)

H, Edi Azali and A G, Ahmad Lutfi and S, Amir Hamzah and Osman, Kahar and A K, Mohammed Rafiq and Abd. Aziz, Azian and Sa'at@Yusof, Azlin (2011) Analysis of the Cerebrospinal Fluid Flow in the Stenosed Aqueduct of Sylvius. In: Annual Scientific Meeting, College of Radiology, Malaysia, 8 - 10 April 2011, The Legend Hotel, Kuala Lumpur. (Unpublished)

Haja Mohideen, Ahmad Jazlan and Sidek, Shahrul Na'im (2011) Development of EMG circuit to study the relationship between Flexor Digitorum Superficialis muscle activity and hand grip strength. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Haja Mohideen, Ahmad Jazlan and Sidek, Shahrul Na'im (2010) A portable myoelectric robotic system for light exercise among bedridden and wheelchair bound individuals. In: 2010 IEEE Control and System Graduate Research Colloquim (ICSGRC), 22 June, 2010, Shah Alam, Selangor, Malaysia.

Hao, Hao and Kumar, Dinesh Kant and Aliahmad, Behzad and Che Azemin, Mohd Zulfaezal and Kawasaki, Ryo (2013) Mathematical verification of summary formula in retinal vessel diameter measurement. In: Biosignals and Biorobotics Conference (BRC), 2013 ISSNIP , 18-20 Feb. 2013 , Rio de Janerio .

Ibrahim, Amirah Fatin and Lim Abdullah, Khatijah and Zilany, Muhammad Shamsul Arefeen and Zaidon, Ahmad Zuhair and Ong, Siew Hui and Tan, Maw Pin (2016) The effect of hearing augmentation on cognitive assessment scores: a pilot crossover randomized controlled trial. In: International Conference for Innovation in Biomedical Engineering and Life Sciences, ICIBEL 2015, 6th-8th Dec 2015, Putrajaya.

Idris, Zulkarnain Mohamed and Jamal, Parveen and Alam, Md. Zahangir (2011) Evaluation of Palm Oil Mill Effluent Treatment Concomitant Phenolics Production by Aspergillus Niger IBS-103ZA. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Ismail, Nur Alya Batrisya and Abd. Wahab, Mohd. Firdaus and Wan Salim, Wan Wardatul Amani (2019) Cyclic voltammetry and electrochemical impedance spectroscopy of partially reduced graphene oxide - PEDOT:PSS transducer for biochemical sensing. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences )IECBES 2018), 3rd-6th December 2018, Kuching, Sarawak.

Jamal, Parveen and Azmi, Saiful Mohammad Nizam and Amid, Azura (2010) Screening of Xanthine Oxidase inhibitor from potential Malaysian medicinal plants. In: UMT 9th International Annual Symposium on Sustainability Science and Management (UMTAS 2010), 8 - 11 May 2010, Terengganu, Malaysia.

Jamal, Parveen and Saheed, Olorunnisola Kola and Alam, Md. Zahangir and Muyibi, Suleyman Aremu and Abdul Karim, Mohamed Ismail (2013) Enrichment of fruit wastes with white rot fungi under submerged state bioconversion. In: International Conference on Biotechnology Engineering (ICBioE 2013), 2 – 4 Jul 2013, Kuala Lumpur, Malaysia.

Jamal, Parveen and Wan Nawawi, Wan Mohd Fazli and Alam, Md. Zahangir (2011) Optimum Medium Components for Biosurfactant Production by Klebsiella pneumoniae WMF02 Utilizing Sludge Palm Oil as a Substrate. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Jami, Mohammed Saedi and Alam, Md Zahangir and Mohd. Salleh, Hamzah and Jamal, Parveen and Kabbashi, Nassereldeen Ahmed and Shahbuddin, Munira and Mohd. Nasir, Fatin Zulaikha and Mohd Hijab, Nadzihah (2019) IIUM Moringa technology for water treatment and ready-to-use therapeutic food for the treatment of malnutrition. In: Hyper-Interdisciplinary Conference 2019, 19th January 2019, Jalan Semarak, Kuala Lumpur. (Unpublished)

Jaswir, Irwandi and A. Monsur, Hammed Ademola and Mohd. Salleh, Hamzah (2010) Finogel - halal nanomaterials from fish collagen extracts. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Jaswir, Irwandi and Osman, Farida and Hashim, Ridzwan and Kitts, David D. and Chowdhury, Ahmed Jalal Khan (2010) Fatty acid, mineral and heavy metal contents of different Malaysia fish species. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur. (Unpublished)

Mahamad Maifiah, Mohd Hafidz and Mohd. Salleh, Hamzah and Jamal, Parveen and Nuge, Tamrin (2011) Screening and optimization of media components for phytase production of ASUIA 279 in Pichia pastoris system using statistical design. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Mansor, Mariatul Fadzillah (2021) Utilization of organic waste. In: Program STEM STE (Student-Teacher-Expert), 17-30 September & 25Oktober 2021, Virtual. (Unpublished)

Md Ali @ Tahir, Aisyah Hanani and Mohamed Amin, Muhammad Azri Ifwat and Azhim, Azran and Sha'ban, Munirah (2018) Evaluation of cartilaginous extracellular matrix production in in vitro "cell-scaffold" construct. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences )IECBES 2018), 3rd-6th December 2018, Kuching, Sarawak.

Md Nazir, Noorhidayah and Sha'ban, Munirah (2016) Examining the safety and efficacy of non-viral gene transfer in cartilage tissue engineering from the worldview of Islam. In: 2nd World Congress on Integration and Islamicisation: Focus On Medical and Health Care Sciences, 21-23 Oct 2016, Kuantan.

Md Nazir, Noorhidayah and Zulkifly, Ahmad Hafiz and Khalid, Kamarul Ariffin and Zainol, Ismail and Zamli, Zaitunnatakhin and Sha'ban, Munirah (2016) Effects of SRY (Sex Determining Region Y)-Box 9 (SOX9) and Telomerase Reverse Transcriptase (TERT) genes transfection in chondrocytes seeded on three-dimensional scaffolds: gross observation and cell proliferation assay. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting, 17-18 Nov 2016, Pulau Pinang.

Md Nazir, Noorhidayah and Zulkifly, Ahmad Hafiz and Khalid, Kamarul Ariffin and Zainol, Ismail and Zamli, Zaitunnatakhin and Sha'ban, Munirah (2016) In vitro and in vivo non-viral SRY (Sex Determining Region Y)-box 9 (SOX9) and telomerase reverse transcriptase (TERT) genes transfer in chondrocytes: work in progress. In: KAHS Research Week (KRW) 2016 in conjunction with 1st Allied Health Scientific Colloquium (AHSC) 2016, 21 - 25 November 2016, Kuantan.

Md Nazir, Noorhidayah and Zulkifly, Ahmad Hafiz and Khalid, Kamarul Ariffin and Zainol, Ismail and Zamli, Zaitunnatakhin and Sha'ban, Munirah (2016) Viability and glycosaminoglycan content in chondrocytes transfected with SRY (sex-determining region y)-BOX 9 and telomerase reverse transcriptase genes. In: 3rd Pan-Asian Biomedical Science Conference 2016 Kuala Lumpur, 7 – 8 Dec 2016, Premiera Hotel Kuala Lumpur, Malaysia.

Mirghani, Mohamed Elwathig Saeed and Yahya, Liyana and Jamal, Parveen (2011) Bioactivity Analysis of Lemongrass (Cymbopogan Citratus) Essential Oil. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Mohamad, Mohd Yusof and Mohamed Amin, Muhammad Azri Ifwat and Md Nazir, Noorhidayah and Ahmad Radzi, Muhammad Aa’zamuddin and Hashim, Rosyafirah and Zulkifly, Ahmad Hafiz and Sha'ban, Munirah (2016) Fabrication and evaluation of mechanical strength of poly(lactic-co-glycolic acid) scaffold incorporated with atelocollagen type II. In: National Colloquium on Stem Cell Research 2016, 7-8 Mar 2016, Kota Bharu, Kelantan.

Mohamad, Mohd Yusof and Mohamed Amin, Muhammad Azri Ifwat and Md Nazir, Noorhidayah and Ahmad Radzi, Muhammad Aa’zamuddin and Hashim, Rosyafirah and Zulkifly, Ahmad Hafiz and Sha'ban, Munirah (2016) Swelling capacity and degradation behaviour of poly(lactic-co-glycolic acid) tissue engineering scaffold through atelocollagen, fibrin or, combination of atelocollagen and fibrin addition. In: 4th International Science Postgraduate Conference 2016, 22-24 Feb 2016, Johor Bahru.

Mohamad, Mohd Yusof and Mohamed Amin, Muhammad Azri Ifwat and Zulkifly, Ahmad Hafiz and Sha'ban, Munirah (2016) In vivo evaluation of 3-dimensional PLGA/ Atelocollagen/ Fibrin scaffolds for intervertebral disc (IVD) regeneration. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting, 17-18 Nov 2016, Seberang Jaya, Pulau Pinang.

Mohamad, Mohd Yusof and Mohamed Amin, Muhammad Azri Ifwat and Zulkifly, Ahmad Hafiz and Sha'ban, Munirah (2016) Monolayer culture expansion of Annulus fibrosus cells for intervertebral disc regeneration. In: KAHS Research Week (KRW) 2016 in conjunction with 1st Allied Health Scientific Colloquium (AHSC) 2016, 21 - 25 November 2016, KAHS Examination Hall & ​Lecture Hall 1.

Mohamad, Mohd Yusof and Mohamed Amin, Muhammad Azri Ifwat and Zulkifly, Ahmad Hafiz and Sha'ban, Munirah (2016) Poly(lactic-co-glycolic acid) and atelocollagen hybrid scaffold seeded with annulus fibrosus cells enhances the formation of cartilaginous tissue engineered construct in vitro. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting, 17 - 18 Nov 2016, Pulang PiNang.

Mohamad Puad, Noor Illi and Mavituna, Ferda (2009) Growth characteristics of arabidopsis thaliana cell suspension culture. In: School of Chemical Engineering and Analytical Science (CEAS) Postgraduate Conference, June 2009, The University of Manchester, UK. (Unpublished)

Mohamed Amin, Muhammad Azri Ifwat and Md Ali @ Tahir, Aisyah Hanani and Azhim, Azran and Mohamed Sideek, Mohamed Arshad and Sha'ban, Munirah (2018) Characterization of 3d (65:35) poly(lactic-co-glycolic acid) incorporated with fibrin and atelocollagen scaffolds using scanning electron microscopy, porosity and swelling tests. In: World Congress of the Tissue Engineering and Regenerative Medicine International Society, Inc. (TERMIS), September 4-7, 2018, Kyoto, Japan. (Unpublished)

Mohamed Amin, Muhammad Azri Ifwat and Md Ali @ Tahir, Aisyah Hanani and Azhim, Azran and Sha'ban, Munirah (2019) Physical properties and biocompatibility of 3D hybrid PLGA based scaffolds. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences )IECBES 2018), 3rd-6th December 2018, Kuching, Sarawak.

Mohamed Amin, Muhammad Azri Ifwat and Mohamad, Mohd Yusof and Sha'ban, Munirah (2016) Measurement of sulphated glycosaminoglycans and deoxyribonucleic acid content in annulus fibrosus intervertebral disc cells seeded into 3-dimensional poly(Lactic-Co-Glycolic Acid) based scaffolds. In: Malaysian Symposium of Biomedical Science 2016, 14-15 May 2016, Sintok.

Mohamed Amin, Muhammad Azri Ifwat and Mohamad, Mohd Yusof and Zulkifly, Ahmad Hafiz and Sha'ban, Munirah (2016) Poly(lactic-co-glycolic acid), atelocollagen and fibrin hybrid scaffold seeded with annulus fibrosus cells enhances the formation of cartilaginous tissue engineered construct in vitro. In: 6th MTERMS (Malaysian Tissue Engineering and Regenerative Medicine Scientific Meeting) 2016 in conjunction with 2nd Malaysian Stem Cell Meeting, 17-18 Nov 2016, Seberang Jaya, Pulau Pinang.

Mohamed Amin, Muhammad Azri Ifwat and Shuib, Noor Faizatul Husna and Md Nazir, Noorhidayah and Mohamad, Mohd Yusof and Ahmad Radzi, Muhammad Aa'zamuddin and Sha'ban, Munirah (2016) Collagen I and collagen II immunohistochemistry analyses on in vitro 3D poly(lactic-co-glycolic acid) seeded with intervertebral disc cells with and without fibrin scaffold. In: The 2nd KAHS Research Week 2016 and the 1st Allied Health Scientific Colloquium 2016, 21-25 Nov 2016, Kuantan.

Mohd Jan, Nurul Hafiza and Zulkifly, Ahmad Hafiz and Ibrahim, Mohd Zulfadzli and Sha'ban, Munirah (2016) Early response in antibacterial activity of orthopaedic metal implant coated with silver composite for future osteomyelitis treatment: preliminary results. In: KAHS Research Week (KRW) 2016 in conjunction with 1st Allied Health Scientific Colloquium (AHSC) 2016, 21 - 25 November 2016, Kuantan, Pahang.

Mohd Zaki, Hafizah Hanim and Bahrudin, Nik Amnani and Abdullah, Jamaluddin and Sarifuddin, Norshahida (2018) Effect of different reducing agents on phase formation and transformation behaviour of Ni-Ti shape memory alloy. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Mohd. Azharuddin, Nur Syamimi and Ahmad Radzi, Muhammad Aa’zamuddin and Sha'ban, Munirah (2016) Tissue engineering and regenerative medicine research and development in Malaysia: A scientometric study based on relevant conferences from 2004 to 2014. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting, 17-18 Nov 2016, Seberang Jaya, Pulau Pinang.

Mohd. Azharuddin, Nur Syamimi and Shuib, Noor Faizatul Husna and Md Nazir, Noorhidayah and Mohamad, Mohd Yusof and Mohamed Amin, Muhammad Azri Ifwat and Ahmad Radzi, Muhammad Aa’zamuddin and Sha'ban, Munirah (2016) Histology staining on in vitro 3D poly(lactic-co-glycolic acid) seeded with annulus fibrosus, nucleus pulposus, and a combination of annulus fibrosus: nucleus pulposus (1:1) cells with and without fibrin scaffold. In: KAHS Research Week (KRW) 2016 in conjunction with 1st Allied Health Scientific Colloquium (AHSC) 2016, 21-25 Nov 2016, Kuantan.

N,M, Mubarak and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid and Al Hazza, Muataz Hazza Faizi and I.Y, Qudsieh and Al-Saadi, Mohammed A. and Mohamed, Khalid (2009) Synthesis of carbon nanotubes and its potential application in protein purification by using skim latex serum. In: American Institute of Physics Conference Proceeding, 28 September - 2 October 2009, Sochi, Russia.

Nordin, Anis Nurashikin and S.M., Arifuzzaman and Mel, Maizirwan and Spray, David and Voiculescu, Ioana (2011) Study of cells attachment using impedance spectroscopy technique. In: International Mechanical Engineering Congress & Exposition (IMECE 2011), 11-17 November 2011, Denver, Colorado.

Puzi, Asmarani and Sidek, Shahrul Na'im and Sado, F (2017) Mechanical impedance modeling of human arm: a survey. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2018) Cancer relapse prediction from microrna expression data using machine learning. In: 3rd Current Research on Information Technology, Mathematics Sciences, Science and Technology (CRIMSTIC 2018), 27th-29th April 2018, Bandar Hilir, Melaka. (Unpublished)

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2016) Ectopic miRNA network and the crosstalk between different signalling pathways during epithelial–mesenchymal transition and mesenchymal–epithelial transition. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Razak, Eliza and Yusof, Faridah and Ahmad Raus, Raha (2017) Evaluation of miRNA-based classifiers for cancer diagnosis. In: International Conference on Engineering, Technologies and Applied Sciences (ICETAS-2017), 23rd-25th January 2017, Kuala Lumpur. (Unpublished)

Roslan, Muhammad Rozaidi and Sidek, Shahrul Na'im and Sidek, Sabrilhakim and Mohd Khalid, Mohd Shukry (2017) EMG based classification of thumb posture using portable thumb training system. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4th-8th December 2016, Kuala Lumpur.

Rusli, Nazreen and Md. Yusof, Hazlina and Sidek, Shahrul Na'im and Latif, M. Hafiz (2017) Hottest pixel segmentation based thermal image analysis for children. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4th-8th December 2016, Kuala Lumpur.

Rusli, Nazreen and Sidek, Shahrul Na'im and Md. Yusof, Hazlina (2015) Non-invasive assessment of affective states on individual with autism spectrum disorder: a review. In: International Conference for Innovation in Biomedical Engineering and Life Sciences (ICIBEL2015), 6th-8th Dec. 2015, Putrajaya, Malaysia.

Sado, Fatai and Sidek, Shahrul Na'im and Md. Yusof, Hazlina (2014) Adaptive hybrid impedance control for a 3DOF upper limb rehabilitation robot using hybrid automata. In: 2014 IEEE Conference on Biomedical Engineering and Sciences (IECBES 2014), 8-10 December 2014, Miri, Sarawak.

Sarifuddin, Norshahida and Ahmad A. Shahrim, Nur’Aishah and Azman, K.S (2018) Effect of oregano essential on the properties of mango kernel starch films. In: International Conference on Advanced Manufacturing and Industry Applications, ICAMIA 2018, 15th-17th August 2018, Kuching, Sarawak.

Sediono, Wahju and Dössel, O. (2002) Heart phantom - a simple elastomechanical model of ventricle. In: CARS 2002 - Computer Assisted Radiology and Surgery, 26-29 June 2002, Paris.

Sediono, Wahju and Dössel, Olaf (2002) Some results on the simulation of the elastomechanics of ventricle. In: Proc. ISSM 2002, 2002, Berlin, Germany.

Sediono, Wahju and Dössel, Olaf (2003) The effect of spatio-temporal contraction force on various hyperelastic ventricle models. In: CARS 2003 (Computer Assisted Radiology and Surgery), the 17th International Congress and Exhibition, 25 - 28 June 2003, London.

Sha'ban, Munirah (2016) 3-Dimensional Poly(Lactic-co-Glycolic Acid) (PLGA), Fibrin and Atelocollagen Bioscaffold for Intervertebral Disc (IVD) Tissue Engineering. In: BioMalaysia & Asia Pacific Bioeconomy 2016, 31 May-02 Jun 2016, Kuala Lumpu. (Unpublished)

Sha'ban, Munirah and Mohamad Sukri, Norhamiza and Zulkifly, Ahmad Hafiz (2016) In vitro and in vivo gene expression studies of cartilage-like tissue engineered construct using a combination of transiently transfected human osteoarthritic chondrocytes and tissue engineering technique. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting, 21-25 Nov 2016, Pulau Pinang.

Shahbuddin, Munira (2018) Issues and challenges in the development of three-dimensional model for thyroid cancer. In: International Conference Biotechnology Engineering, ICBioE ‘18 September 19-20, 2018,, 19th-20th September 2018, Kuala Lumpur, Malaysia.

Shahbuddin, Munira and Raus, Raha Bt. Ahmad and Ramli, Nur Amalina and Adel, Nahla and Jami, Mohammed Saedi and Zainuddin, Zaki (2018) The use of effective microorganisms (EM) for pretreatment of wet market wastewater. In: International Conference Biotechnology Engineering, ICBioE ‘18, 19th-20th September 2018, Kuala Lumpur.

Siddiqi, Abdul Rahman and Sidek, Shahrul Na'im and Khorshidtalab, Aida (2015) Signal processing of EMG signal for continuous thumb-angle estimation. In: 41st Annual Conference of the IEEE Industrial Electronics Society, 9-12 November 2015, Yokohama, Japan.

Siddiqi, Abdul Rahman and Sidek, Shahrul Na'im and Roslan, Muhammad Rozaidi (2015) EMG based classification for continuous thumb angle and force prediction. In: 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IEEE IRIS20I5), 18th-20th October 2015, Langkawi, Kedah.

Sidek, Shahrul Na'im and Ghazali, Aimi Shazwani and Wok, Saodah (2014) Emotion embodiment in robot-assisted rehabilitation system using hybrid automata. In: 2014 IIAI 3rd International Conference on Advanced Applied Informatics, 31 Aug 2014 - 4 Sep 2014, Fukuoka, Japan.

Sidek, Shahrul Naim and Haja Mohideen, Ahmad Jazlan (2012) Measurement system to study the relationship between forearm EMG signals and hand grip force. In: International Conference on Biomedical Engineering (ICoBE2012), 27-28 Feb. 2012, Perlis.

Sopyan, Iis and Gunawan, - and -, Suryanto (2014) Sol-gel derived zinc doped calcium phosphate bioceramics prepared via different sintering strategies. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23rd-25th September 2014, Kuala Lumpur. (Unpublished)

Wan Salim, Wan Wardatul Amani and Baldi, Antonio and Ziaie, Babak (2005) Inductive link modeling and design guidelines for optimum power transfer in implantable wireless microsystems. In: Proceedings of the 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (IEEE Cat. No.03CH37439), 17th-21st September 2003, Cancun, Mexico.

Wan Salim, Wan Wardatul Amani and Benoudjit, Abdel Mohsen and Ihda Uswah Solehah, Shohibuddin and Tumian, Afidalina (2019) Cyclic voltammetry and charge/discharge cycles of conductive polymer on screen-printed carbon and platinum electrodes in aqueous media. In: "4th International Conference on Advances in Manufacturing and Materials Engineering 2019", 30-31 October 2019, PICC, Putrajaya. (Unpublished)

Wan Salim, Wan Wardatul Amani and Ding, Zhenweng and Ziaie, Babak (2008) A hydrogel stamper with expandable height and built-in reservoirs for patterning biomolecules on 3D topologies. In: 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS), 21st-25 January 2007, Kobe, Japan.

Wan Salim, Wan Wardatul Amani and Park, Joon and Rickus, Jenna and Radamacher, Abraham and Ricco, Antonio (2014) Sporesat: a nanosatellite platform lab-on-a-chip system for investigating gravity threshold of fern-spore single-cell calcium ion currents. In: Workshop on Solid-State Sensors, Actuators, and Microsystems, 8-12 June 2014, South Carolina USA.

Zaw, Zaw Lay Htoon and Sidek, Shahrul Na'im and Fatai, Sado and Yunahar, Taufik (2017) Assessment of upper limb muscle tone level based on estimated impedance parameters. In: IEEE-EMBS Conference of Biomedical, Engineering and Sciences (IECBES 2016), 4th-8th Dec. 2016, Kuala Lumpur.

Zulkifly, Ahmad Hafiz and Khalid, Kamarul Ariffin and Aziz, Mohd Yusof and Mohamed Amin, Mohamed Azril and Awang, Mohd Shukrimi and Mohd Yusof, Nazri and Che Ahmad, Aminudin and Zakaria@Mohamad, Zamzuri and Fazan, Fazilah (2008) An In Vivo Implantation Study in New Zealand White Rabbits for Granular Hydroxyapatite. In: eCM IX MUSCULOSKELETAL TRAUMA: 50 YEARS OF AO RESEARCH, June 15-18, 2008, Convention Centre, Davos, Switzerland.

Zulkifly, Ahmad Hafiz and Khalid, Kamarul Ariffin and Mohamed Amin, Mohamed Azril and Awang, Mohd Shukrimi and Mohd Yusof, Nazri and Che Ahmad, Aminudin and Zakaria@Mohamad, Zamzuri and Fazan, Fazilah (2008) Granules Hydroxyapatite Application In Fractures. In: eCM IX MUSCULOSKELETAL TRAUMA: 50 YEARS OF AO RESEARCH, June 15-18, 2008, Convention Centre, Davos, Switzerland.

Monograph

Azhim, Azran and Sha'ban, Munirah and Kitajima, Tatsuo and Mohamad, Saharuddin and Mat Ripen, Adiratna (2019) Study on histological properties of recellularized bioscaffolds from decellularized tissues for vessel regenerative application. Project Report. UNSPECIFIED. (Unpublished)

Sidek, Shahrul Na'im (2017) Investigation of thumb-tip force prediction based on Hill's Muscle model using noninvasive electromyography and ultrasound signals. Research Report. UNSPECIFIED. (Unpublished)

Sopyan, Iis and Hablee, Sufiamie and Razali, Nurul Nabilah (2019) Straightforward synthesis of injectable calcium phosphate cement through novel hydrthermal technique for bone filling materials. Research Report. UNSPECIFIED. (Unpublished)

Tumian, Afidalina (2020) Novel method for building ancient recombination landscape using archaic human genomes. Project Report. UNSPECIFIED. (Unpublished)