Items where Subject is "T Technology > T Technology (General) > T55.4 Industrial engineering.Management engineering. > T58.7 Production capacity. Manufacturing capacity"

Article

Amin, A. K. M. Nurul and Sarker, Md. Ruhul Amin and Ahmed, Mahiuddin and Karim, A.N. Mustafizul (1998) Selection of cemented carbide turning tools using EMF and optimization criteria. Journal of Materials Processing Technology, 77. pp. 59-63. ISSN 0924-0136

Bashath, Samar and Ismail, Amelia Ritahani (2018) Comparison of swarm intelligence algorithms for high dimensional optimization problems. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). pp. 300-307. ISSN 2502-4752

Begum, Shahida Nathira and Karim, A.N. Mustafizul and Hashmi, M. S. J. (2008) Characterization and performance evaluation of zinc oxide varistor blocks processed by latex binders. Journal of American Ceramic Society, 91 (10). pp. 3216-3221. ISSN 0002-7820

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785

Karim, A. N. Mustafizul and Begum, Shahida and Hashmi, M. S. J. (1997) Processing of zinc oxide varistors : sources of defects and possible measures for their elimination. Studies in Applied Mechanics, 45 (C). pp. 143-153. ISSN 0922-5382

Karim, A.N. Mustafizul and Puyane, R. and El-Baradie, M.A and Hashmi, M. S. J. (1998) Holding time in the pressing cycle and its influence on the performance characteristics of zinc oxide varistor discs. Journal of Materials Processing Technology, 77. pp. 54-58. ISSN 0924-0136

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Hafiz, A. M. Khalid and Turnad L., Ginta (2008) Prediction of tool life in end milling of hardened steel AISI D2. European Journal of Scientific Research, 21 (4). pp. 592-602. ISSN 1450-216X,

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul (2012) Surface integrity in hot machining of AISI D2 hardened steel. Advanced Materials Research, 500. pp. 44-50. ISSN 1022-6680

Lajis , M.A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Hafiz, A. M. K. (2010) Preheating in end milling of AISI D2 hardened steel with coated carbide inserts. Advanced Materials Research, 83-86. pp. 56-66. ISSN 10226680

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2021) The effect of chilled air on burr formation when drilling aluminium alloy in manufacturing industry. International Journal of Progressive Sciences and Technologies (IJPSAT), 28 (1). pp. 437-445. ISSN 2509-0119

Rasli, Mohamad Dzulfiqar and Mohd Nor, Muhammad Zaki Mukhtar and Sorooshian , Shahryar and Tan, Seng Teck and Ismail, Md Yusof (2016) How productivity can be affected by human capital. International Journal of Engineering Applied Sciences and Technology, 1 (6). pp. 29-32. ISSN 2455-2143

Talikoti, Mohammed Aqeel and Kittur, M I and Reddy, Avala Raji and Baig, Maughal Ahmed Ali and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Influence of high and subsequent low-temperature artificial aging on exfoliation corrosion of AA2024. Materials Today, 47. pp. 6147-6152. ISSN 2214-7853

Tomadi, Siti Haryani and Abd Halim, Nor Farah Huda and Dahnel, Aishah Najiah and Gunasegaran, Umma Sankar and Joo, Eng Lim and Rosman, Amar Syazwan (2022) Optimization study on width of cut and cutting-edge radius during side milling of DAC 55 steel. Jurnal Tribologi, 33. pp. 125-136. ISSN 2289-7232

Wahid, Zaharah and Che Daud, Mohd Radzi and Ahmad, Kartini (2020) Study on productivity improvement of manual operations in soya sauce factory. IIUM Engineering Journal, 21 (1). pp. 202-211. ISSN 1511-788X E-ISSN 2289-7860

Book

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Turnad L., Ginta (2008) Theoretical and experimental investigation in prediction of tool life in preheated machining of AISI 02 hardened steel. IIT Madras, Chennai, India.

Book Chapter

Abu Samah, Mohd Armi and Yunus, Kamaruzzaman and Wan Kamal, Wan Mohd. Hilmi and Mohd. Hussain, Mohd. Ramzi and Hassan Basri, Raszera (2021) Food wastes management: practice of composting process at the IIUM Kuantan Campus. In: Natural Food Product and Waste Recovery. Taylor & Francis Group.

Proceeding Paper

Ani, Mohd Hanafi and Zaharudin, M. Z. and Anhar, Zaki and Musa, Mukhtaruddin and Abdul Hamid, Abd. Malek (2020) Accelerates high temperature oxidation due to the change of Schottky’s Barrier Height of Cr2O3 layer in humid condition. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand.

Begum, Shahida and Karim, A.N. Mustafizul and Hashmi, M. S. J. (2006) Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions. In: 1st International Conference and 7th AUN/SEED - Field wise Seminar on Manufacturing Material Processing (ICMM2006), 14-16 March 2006, Kuala Lumpur.

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ishtiyaq, M. H. (2007) Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2009) Surface roughness and surface integrity of end milled titanium alloy TI-6AL-4V at room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Sutjipto, Agus G. (2007) Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts. In: International Conference on Mechanical Engineering (ICME07), 29-31 December 2007, Dhaka, Bangladesh.

Ginta, Turnad Lenggo and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2009) Surface roughness models for end milling titanium alloy TI-6AL-4V under room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Ginta , Turnad L. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2008) Tool Life Prediction by Response Surface Methodology for End Milling Titanium Alloy Ti-6Al-4V Using PCD Inserts. In: International Joint Conference in Engineering (IJSE 2008), 4-5 August, 2008, Jakarta, Indonesia.

Hafiz, A.M. Khalid and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI HI3 tool steel. In: 2007 IEEE International Conference on Industrial Engineering and Engineering Management, 2 - 4 December 2007, Singapore.

Hafiz, A.M. Khalid and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of tool life prediction model for PCBN inserts during the high speed end milling of AISI H13 hardened tool steel. In: International Conference on Mechanical Engineering (ICME07), 29-31 Dec. 2007, Dhaka, Bangladesh.

Haiza, Haroon and Yaacob, Iskandar Idris and Ahmad Azhar, Ahmad Zahirani (2018) Thermal conductivity of water based magnetite ferrofluids at different temperature for heat transfer applications. In: International Conference on Sustainable Materials, ICoSM 2018, 16th Apr. 2018, Bangkok, Thailand.

Hossain, Md. Bellal and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2000) Influence of cutting tool angles on the formation of built-up-edge. In: International Conference on Manufacturing (ICM 2000), 24-26 February, 2000, Dhaka.

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2007) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end-milling of Inconel 718 using coated WC-co inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), , 7-9 November 2007, Fukuoka, Japan..

Jefferi, Nurul Zafiqa and Amir, Adibah and Purwanto, Hadi (2022) Detection method of Kelulut honey adulteration. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Karim, A.N. Mustafizul and Begum, Shahida (2013) Role of surface to volume ratio of zinc oxide arrester on energy absorption capability. In: International Conference on Energy and Environment (ICEE2013), March 5-6, 2013, Putra Jaya, Malaysia. (Unpublished)

Karim, A.N. Mustafizul and Begum, Shahida and Hashmi, M. S. J (2005) Electrical performance of zinc oxide varistor using powders processed by different latex binders. In: The 9th Japan Int. SAMPE symposium, Nov 29 - Dec 2, 2005, Tokyo Big Sight, Tokyo, Japan.

Karim, A.N. Mustafizul and Hashmi, M. S. J. (2005) Performance of zinc oxide varistor discs sintered by alternative orientations. In: ATCi2005, Conference on Advanced Materials, 6 - 8 Dec. 2005, Putrajaya, Malaysia.

Karim, A.N. Mustafizul and Puyane, R. and El-Baradie, M.A and Hashmi, M. S. J. (1996) Long and short duration pulse performance of zinc oxide varistor compacted with modified pressing cycle. In: International Congress on Advances in Powder Metallugy and Particulate Material, 16-21 June 1996, Washingto D. C..

Karim, A.N. Mustafizul and Puyane, R. and El-Baradie, M.A and Hashmi, M. S. J. (1996) Performance characteristics of zinc oxide varistor processed under different pressing conditions. In: International Congress on Advances Advances in Powder Metallurgy and Particulate Materials, 16-21June 1996, Washington D. C..

Khalid, A. K. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of tool life prediction model of TIALN coated tools during the high speed hard milling of AISI H13 steel. In: The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, 24 - 27 October 2007, Zadar, Croatia.

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2008) Hot machining in end milling of hardened steel AISI D2. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2008).

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2008) Modelling and optimization of tool life in end milling of AISI 02 hardened steel. In: 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME ’08), July 23-25, 2008, Naples, Italy.

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Hafiz, A.M. Khalid (2007) Prediction of surface roughness in hard milling of AISI D2 tool steel. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Khalid, A. K. H. (2007) Modelling of tool life by response surface methodology in hard milling of Aisi D2 tool steel. In: The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, , 24 - 27 Oct., 2007, Zadar, Croatia.

Muhammad, Mohd Amirul Ashraf and Amir, Adibah and Abdul Razak, Abdul Rahman (2022) Heterotrigona Itama Kelulut honey eehydration process to prolong shelf life. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.