IIUM Repository

Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785

[img] PDF (Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts) - Published Version
Restricted to Registered users only

Download (7MB) | Request a copy


This paper presents the investigation for assessment of tool life of PCD inserts in end milling of titanium alloy Ti-6AI-4V under dry conditions. Small central composite design (CCD) was employed to design the experiments and to develop the models which correlate tool life and the primary cutting parameters such as cutting speed, axial depth of cut and feed values. The range which is used in this study for cutting speed, axial depth of cut, and feed, are 80.5 - 200 m/min, 05 - 2.0 mm, and 0.05 - 0.15 mm/tooth, respectively. Design expert package software was employed to establish the tool life models and the adequacy of the models were verified using analysis of variance at 95% of confidence interval. From the models, it was affirmed that cutting speed has the most significant effect on tool life, followed by feed and axial depth of cut

Item Type: Article (Journal)
Additional Information: 2872/26828
Subjects: T Technology > T Technology (General) > T55.4 Industrial engineering.Management engineering. > T58.7 Production capacity. Manufacturing capacity
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering
Depositing User: Prof. Dr. A. N. Mustafizul Karim
Date Deposited: 02 Aug 2013 09:21
Last Modified: 17 Sep 2015 10:42
URI: http://irep.iium.edu.my/id/eprint/26828

Actions (login required)

View Item View Item


Downloads per month over past year