IIUM Repository

Influence of cutting tool angles on the formation of built-up-edge

Hossain, Md. Bellal and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2000) Influence of cutting tool angles on the formation of built-up-edge. In: International Conference on Manufacturing (ICM 2000), 24-26 February, 2000, Dhaka.

[img] PDF (Influence of cutting tool angles on the formation of built-up-edge) - Published Version
Restricted to Repository staff only

Download (6MB) | Request a copy

Abstract

This paper presents the results of investigating the effect of tool geometry on the formation of built-up-edge (BUE). Side cutting and rake angles of the cutting tool were chosen for the study. Initially the experiments were conducted by one-variable-at-a-time approach to identify the range of angles influencing BUE. Both the angles of the cutting tool were found to influence the BUE height. For a set value of the rake angle, a peak of BUE height was observed with the change of side cutting angle. An interactive effect of both the parameters of the tool geometry was observed on the formation of the BUE. An attempt was subsequently made to develop a model by adopting an approach of design of experiment. The model developed indicated that at higher range of the rake angle, the increase of side cutting angle would have very little influence on the height of BUE. But at lower rake angle (-15 to 15 deg) height of BUE was found to decrease rapidly with the increase of side cutting angle. For a set value of side cutting angle, the increase in rake angle of the tool would lead to increase in the height of BUE.

Item Type: Conference or Workshop Item (Full Paper)
Additional Information: 4289/26860
Uncontrolled Keywords: Built-up-edge, Tool geometry, Response surface methodology
Subjects: T Technology > T Technology (General) > T55.4 Industrial engineering.Management engineering. > T58.7 Production capacity. Manufacturing capacity
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User: Prof. Dr. A. N. Mustafizul Karim
Date Deposited: 02 Sep 2013 16:39
Last Modified: 02 Sep 2013 16:39
URI: http://irep.iium.edu.my/id/eprint/26860

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year